Dead

[official-gcc.git] / gomp-20050608-branch / gcc / testsuite / lib / target-supports-dg.exp

#   Copyright (C) 1997, 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

# If this target does not support weak symbols, skip this test.

proc dg-require-weak { args } {
    set weak_available [ check_weak_available ]
    if { $weak_available == -1 } {
        upvar name name
        unresolved "$name"
    }
    if { $weak_available != 1 } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target does not support the "visibility" attribute, skip this
# test.

proc dg-require-visibility { args } {
    set visibility_available [ check_visibility_available [lindex $args 1 ] ]
    if { $visibility_available == -1 } {
        upvar name name
        unresolved "$name"
    }
    if { $visibility_available != 1 } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target does not support the "alias" attribute, skip this
# test.

proc dg-require-alias { args } {
    set alias_available [ check_alias_available ]
    if { $alias_available == -1 } {
        upvar name name
        unresolved "$name"
    }
    if { $alias_available < 2 } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target's linker does not support the --gc-sections flag,
# skip this test.

proc dg-require-gc-sections { args } {
    if { ![ check_gc_sections_available ] } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target does not support profiling, skip this test.

proc dg-require-profiling { args } {
    if { ![ check_profiling_available ${args} ] } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target does not support DLL attributes skip this test.

proc dg-require-dll { args } {
    global target_triplet
    # As a special case, the mcore-*-elf supports these attributes.
    # All Symbian OS targets also support these attributes.
    if { [string match "mcore-*-elf" $target_triplet]
         || [string match "*-*-symbianelf" $target_triplet]} {
        return
    }
    # PE/COFF targets support dllimport/dllexport.
    if { [gcc_target_object_format] == "pe" } {
        return
    }

    upvar dg-do-what dg-do-what
    set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
}

proc dg-require-iconv { args } {
    if { ![ check_iconv_available ${args} ] } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target does not support named sections skip this test.

proc dg-require-named-sections { args } {
    if { ![ check_named_sections_available ] } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If the target does not match the required effective target, skip this test.

proc dg-require-effective-target { args } {
    set args [lreplace $args 0 0]
    if { ![is-effective-target [lindex $args 0]] } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target does not have fork, skip this test.

proc dg-require-fork { args } {
    if { ![check_fork_available] } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# If this target does not have mkfifo, skip this test.

proc dg-require-mkfifo { args } {
    if { ![check_mkfifo_available] } {
        upvar dg-do-what dg-do-what
        set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
    }
}

# Check the flags with which the test will be run against options in
# a test directive that will skip or xfail that test.  The DejaGnu proc
# check_conditional_xfail will look at the options in compiler_flags, so
# set that up for this test based on flags we know about.

proc check_test_flags { args } {
    global compiler_flags
    upvar 2 dg-extra-tool-flags extra_tool_flags

    # Pull the args out of the enclosing list.
    set args [lindex $args 0]

    # Start the list with a dummy tool name so the list will match "*"
    # if there are no flags.
    set compiler_flags " toolname "
    append compiler_flags $extra_tool_flags
    set dest [target_info name]
    if [board_info $dest exists multilib_flags] {
        append compiler_flags "[board_info $dest multilib_flags] "
    }

    set answer [check_conditional_xfail $args]

    # Any value in this variable originally was left over from an earlier test.
    set compiler_flags ""

    verbose "check_test_flags: $args $answer" 2
    return $answer
}

# Skip the test (report it as UNSUPPORTED) if the target list and
# included flags are matched and the excluded flags are not matched.
#
# The first argument is the line number of the dg-skip-if directive
# within the test file.   Remaining arguments are as for xfail lists:
# message { targets } { include } { exclude }
#
# This tests against multilib flags plus either the default flags for this
# group of tests or flags specified with a previous dg-options command.

proc dg-skip-if { args } {
    set args [lreplace $args 0 0]

    set selector [list target [lindex $args 1]]
    if { [dg-process-target $selector] == "S" } {
        # The target list matched; now check the flags.  The DejaGnu proc
        # check_conditional_xfail will look at the options in compiler_flags,
        # so set that up for this test based on flags we know about.  Start
        # the list with a dummy tool name so the list will match "*" if
        # there are no flags.

        global compiler_flags
        upvar dg-extra-tool-flags extra_tool_flags

        set compiler_flags " toolname "
        append compiler_flags $extra_tool_flags
        set dest [target_info name]
        if [board_info $dest exists multilib_flags] {
            append compiler_flags "[board_info $dest multilib_flags] "
        }

        # The target list might be an effective-target keyword, so replace
        # the original list with "*-*-*".
        if [check_conditional_xfail [lreplace $args 1 1 "*-*-*"]] {
            upvar dg-do-what dg-do-what
            set dg-do-what [list [lindex ${dg-do-what} 0] "N" "P"]
        }

        # Any value in this variable was left over from an earlier test.
        set compiler_flags ""
    }
}

# Like check_conditional_xfail, but callable from a dg test.

proc dg-xfail-if { args } {
    # Don't change anything if we're already skipping the test.
    upvar dg-do-what dg-do-what
    if { [lindex ${dg-do-what} 1] == "N" } {
      return
    }

    set args [lreplace $args 0 0]
    set selector [list target [lindex $args 1]]
    if { [dg-process-target $selector] == "S" } {
        global compiler_conditional_xfail_data
        set compiler_conditional_xfail_data [lreplace $args 1 1 "*-*-*"]
    }
}

# Intercept the call to the DejaGnu version of dg-process-target to
# support use of an effective-target keyword in place of a list of
# target triplets to xfail or skip a test.
#
# selector is one of:
#    xfail target-triplet-1 ...
#    xfail effective-target-keyword
#    xfail selector-expression
#    target target-triplet-1 ...
#    target effective-target-keyword
#    target selector-expression
#
# For a target list the result is "S" if the target is selected, "N" otherwise.
# For an xfail list the result is "F" if the target is affected, "P" otherwise.
#
# A selector expression appears within curly braces and uses a single logical
# operator: !, &&, or ||.  An operand is another selector expression, an
# effective-target keyword, or a list of target triplets within quotes or
# curly braces.

if { [info procs saved-dg-process-target] == [list] } {
    rename dg-process-target saved-dg-process-target

    # Evaluate an operand within a selector expression.
    proc selector_opd { op } {
        set selector "target"
        lappend selector $op
        set answer [ expr { [dg-process-target $selector] == "S" } ]
        verbose "selector_opd: `$op' $answer" 2
        return $answer
    }

    # Evaluate a target triplet list within a selector expression.
    # Unlike other operands, this needs to be expanded from a list to
    # the same string as "target".
    proc selector_list { op } {
        set selector "target [join $op]"
        set answer [ expr { [dg-process-target $selector] == "S" } ]
        verbose "selector_list: `$op' $answer" 2
        return $answer
    }

    # Evaluate a selector expression.
    proc selector_expression { exp } {
        if { [llength $exp] == 2 } {
            if [string match "!" [lindex $exp 0]] {
                set op1 [lindex $exp 1]
                set answer [expr { ! [selector_opd $op1] }]
            } else {
                # Assume it's a list of target triplets.
                set answer [selector_list $exp]
            }
        } elseif { [llength $exp] == 3 } {
            set op1 [lindex $exp 0]
            set opr [lindex $exp 1]
            set op2 [lindex $exp 2]
            if [string match "&&" $opr] {
                set answer [expr { [selector_opd $op1] && [selector_opd $op2] }]
            } elseif [string match "||" $opr] {
                set answer [expr { [selector_opd $op1] || [selector_opd $op2] }]
            } else {
                # Assume it's a list of target triplets.
                set answer [selector_list $exp]
            }
        } else {
            # Assume it's a list of target triplets.
            set answer [selector_list $exp]
        }

        verbose "selector_expression: `$exp' $answer" 2
        return $answer
    }

    proc dg-process-target { args } {
        verbose "replacement dg-process-target: `$args'" 2
        
        # Extract the 'what' keyword from the argument list.
        set selector [string trim [lindex $args 0]]
        if [regexp "^xfail " $selector] {
            set what "xfail"
        } elseif [regexp "^target " $selector] {
            set what "target"
        } else {
            error "syntax error in target selector \"$selector\""
        }

        # Extract the rest of the list, which might be a keyword.
        regsub "^${what}" $selector "" rest
        set rest [string trim $rest]

        if [is-effective-target-keyword $rest] {
            # The selector is an effective target keyword.
            if [is-effective-target $rest] {
                return [expr { $what == "xfail" ? "F" : "S" }]
            } else {
                return [expr { $what == "xfail" ? "P" : "N" }]
            }
        }

        if [string match "{*}" $rest] {
            if [selector_expression [lindex $rest 0]] {
                return [expr { $what == "xfail" ? "F" : "S" }]
            } else {
                return [expr { $what == "xfail" ? "P" : "N" }]
            }
        }

        # The selector is not an effective-target keyword, so process
        # the list of target triplets.
        return [saved-dg-process-target $selector]
    }
}