| blob | 67efab57f15a4d0948d7d5746236fdc21158743d |
1 # GCC target-specific configuration file.
2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
3 # Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 2, or (at your option) any later
10 #version.
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
15 #for more details.
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING. If not, write to the Free
19 #Software Foundation, 59 Temple Place - Suite 330, Boston, MA
20 #02111-1307, USA.
22 # This is the GCC target-specific configuration file
23 # where a configuration type is mapped to different system-specific
24 # definitions and files. This is invoked by the autoconf-generated
25 # configure script. Putting it in a separate shell file lets us skip
26 # running autoconf when modifying target-specific information.
28 # This file switches on the shell variable ${target}, and also uses the
29 # following shell variables:
30 #
31 # with_* Various variables as set by configure.
32 #
33 # enable_threads Either the name, yes or no depending on whether
34 # threads support was requested.
35 #
36 # default_use_cxa_atexit
37 # "no" by default, can be set to "yes" if a target
38 # wishes to use __cxa_atexit() by default if the
39 # $enable___cxa_atexit variable is not set.
40 #
41 # gas_flag Either yes or no depending on whether GNU as was
42 # requested.
43 #
44 # gnu_ld_flag Either yes or no depending on whether GNU ld was
45 # requested.
47 # This file sets the following shell variables for use by the
48 # autoconf-generated configure script:
49 #
50 # cpu_type The name of the cpu, if different from the first
51 # chunk of the canonical target name.
52 #
53 # tm_defines List of target macros to define for all compilations.
54 #
55 # tm_file A list of target macro files, if different from
56 # "$cpu_type/$cpu_type.h". Usually it's constructed
57 # per target in a way like this:
58 # tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
59 # Note that the preferred order is:
60 # - specific target header "${cpu_type}/${cpu_type.h}"
61 # - generic headers like dbxelf.h elfos.h, etc.
62 # - specializing target headers like ${cpu_type.h}/elf.h
63 # This helps to keep OS specific stuff out of the CPU
64 # defining header ${cpu_type}/${cpu_type.h}.
65 #
66 # tm_p_file Location of file with declarations for functions
67 # in $out_file.
68 #
69 # out_file The name of the machine description C support
70 # file, if different from "$cpu_type/$cpu_type.c".
71 #
72 # md_file The name of the machine-description file, if
73 # different from "$cpu_type/$cpu_type.md".
74 #
75 # tmake_file A list of machine-description-specific
76 # makefile-fragments, if different from
77 # "$cpu_type/t-$cpu_type".
78 #
79 # extra_modes The name of the file containing a list of extra
80 # machine modes, if necessary and different from
81 # "$cpu_type/$cpu_type-modes.def".
82 #
83 # extra_objs List of extra objects that should be linked into
84 # the compiler proper (cc1, cc1obj, cc1plus)
85 # depending on target.
86 #
87 # extra_gcc_objs List of extra objects that should be linked into
88 # the compiler driver (gcc) depending on target.
89 #
90 # extra_headers List of used header files from the directory
91 # config/${cpu_type}.
92 #
93 # extra_passes List of extra executables compiled for this target
94 # machine, used for compiling from source to object.
95 #
96 # extra_parts List of extra object files that should be compiled
97 # for this target machine.
98 #
99 # extra_programs Like extra_passes, but these are used when linking.
100 #
101 # c_target_objs List of extra target-dependent objects that be
102 # linked into the C compiler only.
103 #
104 # cxx_target_objs List of extra target-dependent objects that be
105 # linked into the C++ compiler only.
106 #
107 # target_gtfiles List of extra source files with type information.
108 #
109 # xm_defines List of macros to define when compiling for the
110 # target machine.
111 #
112 # xm_file List of files to include when compiling for the
113 # target machine.
114 #
115 # use_collect2 Set to yes or no, depending on whether collect2
116 # will be used.
117 #
118 # target_cpu_default Set to override the default target model.
119 #
120 # gdb_needs_out_file_path
121 # Set to yes if gdb needs a dir command with
122 # `dirname $out_file`.
123 #
124 # thread_file Set to control which thread package to use.
125 #
126 # gas Set to yes or no depending on whether the target
127 # system normally uses GNU as.
128 #
129 # need_64bit_hwint Set to yes if HOST_WIDE_INT must be 64 bits wide
130 # for this target. This is true iff this target
131 # supports "long" or "wchar_t" wider than 32 bits.
132 #
133 # configure_default_options
134 # Set to an initializer for configure_default_options
135 # in configargs.h, based on --with-cpu et cetera.
136 #
137 # use_fixproto Set to "yes" if fixproto should be run normally,
138 # "no" if fixproto should never be run.
140 # The following variables are used in each case-construct to build up the
141 # outgoing variables:
142 #
143 # gnu_ld Set to yes or no depending on whether the target
144 # system normally uses GNU ld.
146 out_file=
147 tmake_file=
148 extra_headers=
149 extra_passes=
150 extra_parts=
151 extra_programs=
152 extra_objs=
153 extra_gcc_objs=
154 c_target_objs=
155 cxx_target_objs=
156 tm_defines=
157 xm_defines=
158 # Set this to force installation and use of collect2.
159 use_collect2=
160 # Set this to override the default target model.
161 target_cpu_default=
162 # Set this if gdb needs a dir command with `dirname $out_file`
163 gdb_needs_out_file_path=
164 # Set this to control which thread package will be used.
165 thread_file=
166 # Reinitialize these from the flag values every loop pass, since some
167 # configure entries modify them.
168 gas="$gas_flag"
169 gnu_ld="$gnu_ld_flag"
170 default_use_cxa_atexit=no
171 target_gtfiles=
172 need_64bit_hwint=
174 # Default to not using fixproto. Targets which need fixproto should
175 # specifically set this to 'yes'.
176 use_fixproto=no
178 # Don't carry these over build->host->target. Please.
179 xm_file=
180 md_file=
182 # Obsolete configurations.
183 case ${target} in
184 dummy*)
185 if test "x$enable_obsolete" != xyes; then
186 echo "*** Configuration ${target} is obsolete." >&2
187 echo "*** Specify --enable-obsolete to build it anyway." >&2
188 echo "*** Support will be REMOVED in the next major release of GCC," >&2
189 echo "*** unless a maintainer comes forward." >&2
190 exit 1
191 fi;;
192 esac
194 # Unsupported targets list. Do not put an entry in this list unless
195 # it would otherwise be caught by a more permissive pattern. The list
196 # should be in alphabetical order.
197 case ${target} in
198 alpha*-*-linux*libc1* \
199 | i[34567]86-sequent-sysv \
200 | i[34567]86-sequent-sysv[123]* \
201 | i[34567]86-go32-* \
202 | i[34567]86-*-go32* \
203 | m68k-*-linux*aout* \
204 | m68k-*-linux*libc1* \
205 | mips64orion*-*-rtems* \
206 | powerpc-*-linux*libc1* \
207 | sparc-*-linux*aout* \
208 | sparc-*-linux*libc1* \
209 | sparc-hal-solaris2* \
210 | thumb-*-* \
211 | *-*-linux*coff* \
212 | *-*-linux*oldld* \
213 | *-*-rtemsaout* \
214 | *-*-rtemscoff* \
215 | vax-*-vms* \
216 )
217 echo "*** Configuration ${target} not supported" 1>&2
218 exit 1
219 ;;
220 esac
222 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
223 # updated in each machine entry. Also set default extra_headers for some
224 # machines.
225 tm_p_file=
226 cpu_type=`echo ${target} | sed 's/-.*$//'`
227 case ${target} in
228 alpha*-*-*)
229 cpu_type=alpha
230 need_64bit_hwint=yes
231 ;;
232 am33_2.0-*-linux*)
233 cpu_type=mn10300
234 ;;
235 strongarm*-*-*)
236 cpu_type=arm
237 ;;
238 arm*-*-*)
239 cpu_type=arm
240 extra_headers="mmintrin.h"
241 ;;
242 ep9312*-*-*)
243 cpu_type=arm
244 ;;
245 xscale-*-*)
246 cpu_type=arm
247 extra_headers="mmintrin.h"
248 ;;
249 i[34567]86-*-*)
250 cpu_type=i386
251 extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h"
252 ;;
253 x86_64-*-*)
254 cpu_type=i386
255 extra_headers="mmintrin.h xmmintrin.h emmintrin.h pmmintrin.h"
256 need_64bit_hwint=yes
257 ;;
258 ia64-*-*)
259 extra_headers=ia64intrin.h
260 need_64bit_hwint=yes
261 ;;
262 hppa*-*-* | parisc*-*-*)
263 cpu_type=pa
264 ;;
265 m32r*-*-*)
266 cpu_type=m32r
267 ;;
268 m680[012]0-*-*)
269 cpu_type=m68k
270 extra_headers=math-68881.h
271 ;;
272 m68k-*-*)
273 extra_headers=math-68881.h
274 ;;
275 mips*-*-*)
276 cpu_type=mips
277 need_64bit_hwint=yes
278 ;;
279 powerpc*-*-*)
280 cpu_type=rs6000
281 extra_headers="ppc-asm.h altivec.h spe.h"
282 need_64bit_hwint=yes
283 ;;
284 rs6000*-*-*)
285 need_64bit_hwint=yes
286 ;;
287 sparc64*-*-*)
288 cpu_type=sparc
289 need_64bit_hwint=yes
290 ;;
291 sparc*-*-*)
292 cpu_type=sparc
293 ;;
294 s390*-*-*)
295 need_64bit_hwint=yes
296 ;;
297 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
298 sh[123456789l]*-*-*)
299 cpu_type=sh
300 need_64bit_hwint=yes
301 ;;
302 tic4x-*-*)
303 cpu_type=c4x
304 ;;
305 esac
307 tm_file=${cpu_type}/${cpu_type}.h
308 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
309 then
310 tm_p_file=${cpu_type}/${cpu_type}-protos.h
311 fi
312 extra_modes=
313 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
314 then
315 extra_modes=${cpu_type}/${cpu_type}-modes.def
316 fi
318 case ${target} in
319 x86_64-*-*)
320 tm_file="i386/biarch64.h ${tm_file}"
321 ;;
322 esac
324 # On a.out targets, we need to use collect2.
325 case ${target} in
326 *-*-*aout*)
327 use_collect2=yes
328 ;;
329 esac
331 # Common parts for widely ported systems.
332 case ${target} in
333 *-*-darwin*)
334 case ${target} in
335 *-darwin[0-6]*) ;;
336 *) tm_file="${tm_file} darwin7.h" ;;
337 esac
338 tm_file="${tm_file} darwin.h"
339 tm_p_file="${tm_p_file} darwin-protos.h"
340 tmake_file="t-darwin t-slibgcc-darwin"
341 target_gtfiles="\$(srcdir)/config/darwin.c"
342 c_target_objs="darwin-c.o"
343 cxx_target_objs="darwin-c.o"
344 extra_parts="crt2.o"
345 extra_objs="darwin.o"
346 case ${enable_threads} in
347 "" | yes | posix) thread_file='posix' ;;
348 esac
349 ;;
350 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
351 # This is the place-holder for the generic a.out configuration
352 # of FreeBSD. No actual configuration resides here since
353 # there was only ever a bare-bones ix86 configuration for
354 # a.out and it exists solely in the machine-specific section.
355 # This place-holder must exist to avoid dropping into
356 # the generic ELF configuration of FreeBSD (i.e. it must be
357 # ordered before that section).
358 ;;
359 *-*-freebsd*)
360 # This is the generic ELF configuration of FreeBSD. Later
361 # machine-specific sections may refine and add to this
362 # configuration.
363 #
364 # Due to tm_file entry ordering issues that vary between cpu
365 # architectures, we only define fbsd_tm_file to allow the
366 # machine-specific section to dictate the final order of all
367 # entries of tm_file with the minor exception that components
368 # of the tm_file set here will always be of the form:
369 #
370 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
371 #
372 # The machine-specific section should not tamper with this
373 # ordering but may order all other entries of tm_file as it
374 # pleases around the provided core setting.
375 gas=yes
376 gnu_ld=yes
377 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
378 case ${target} in
379 *-*-freebsd3 | *-*-freebsd[3].*)
380 tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
381 *-*-freebsd4 | *-*-freebsd[4].*)
382 tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
383 *-*-freebsd5 | *-*-freebsd[5].*)
384 tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
385 *-*-freebsd6 | *-*-freebsd[6].*)
386 tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
387 *)
388 echo 'Please update *-*-freebsd* in gcc/config.gcc'
389 exit 1
390 ;;
391 esac
392 tmake_file="t-slibgcc-elf-ver t-freebsd"
393 case ${enable_threads} in
394 no)
395 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
396 ;;
397 "" | yes | posix)
398 thread_file='posix'
399 tmake_file="${tmake_file} t-freebsd-thread"
400 # Before 5.0, FreeBSD can't bind shared libraries to -lc
401 # when "optionally" threaded via weak pthread_* checks.
402 case ${target} in
403 *-*-freebsd[34] | *-*-freebsd[34].*)
404 tmake_file="${tmake_file} t-slibgcc-nolc-override"
405 ;;
406 esac
407 ;;
408 *)
409 echo 'Unknown thread configuration for FreeBSD'
410 exit 1
411 ;;
412 esac
413 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
414 ;;
415 *-*-kfreebsd*-gnu)
416 # Must come before *-*-gnu*
417 xm_defines=POSIX # needed for cross-compiling from FreeBSD?
418 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
419 # GNU tools are the only tools.
420 gas=yes
421 gnu_ld=yes
422 case ${enable_threads} in
423 "" | yes | posix) thread_file='posix' ;;
424 esac
425 ;;
426 *-*-linux*libc1* | *-*-linux*aout*)
427 # Avoid the generic linux case.
428 ;;
429 *-*-linux* | frv-*-*linux*)
430 # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
431 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
432 gas=yes
433 gnu_ld=yes
434 case ${enable_threads} in
435 "" | yes | posix) thread_file='posix' ;;
436 esac
437 tmake_file="t-slibgcc-elf-ver t-linux"
438 ;;
439 *-*-gnu*)
440 # On the Hurd, the setup is just about the same on
441 # each different CPU. The specific machines that we
442 # support are matched above and just set $cpu_type.
443 tm_file="${cpu_type}/gnu.h"
444 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
445 # GNU tools are the only tools.
446 gas=yes
447 gnu_ld=yes
448 # These details are the same as for Linux.
449 # But here we need a little extra magic.
450 tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
451 case ${target} in
452 alpha*)
453 tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
454 ;;
455 i[34567]86-*-*)
456 tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
457 ;;
458 esac
459 ;;
460 *-*-netbsd*)
461 tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
462 gas=yes
463 gnu_ld=yes
465 # NetBSD 2.0 and later get POSIX threads enabled by default.
466 # Allow them to be explicitly enabled on any other version.
467 case ${enable_threads} in
468 "")
469 case ${target} in
470 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
471 thread_file='posix'
472 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
473 ;;
474 esac
475 ;;
476 yes | posix)
477 thread_file='posix'
478 tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
479 ;;
480 esac
482 # NetBSD 1.7 and later are set up to use GCC's crtstuff for
483 # ELF configurations. We will clear extra_parts in the
484 # a.out configurations.
485 case ${target} in
486 *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
487 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
488 ;;
489 esac
491 # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
492 # default (unless overridden by --disable-__cxa_atexit).
493 case ${target} in
494 *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
495 default_use_cxa_atexit=yes
496 ;;
497 esac
498 ;;
499 *-*-openbsd*)
500 tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
501 case ${enable_threads} in
502 yes)
503 thread_file='posix'
504 tmake_file="${tmake_file} t-openbsd-thread"
505 ;;
506 esac
507 ;;
508 *-*-rtems*)
509 case ${enable_threads} in
510 yes) thread_file='rtems' ;;
511 esac
512 ;;
513 *-*-vxworks*)
514 tmake_file=t-vxworks
515 tm_file="${tm_file} elfos.h svr4.h vxworks.h"
516 case ${enable_threads} in
517 no) ;;
518 "" | yes | vxworks) thread_file='vxworks' ;;
519 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
520 esac
521 use_collect2=yes
522 xm_defines=POSIX
523 ;;
524 esac
526 case ${target} in
527 # Support site-specific machine types.
528 *local*)
529 rest=`echo ${target} | sed -e "s/$cpu_type-//"`
530 tm_file=${cpu_type}/$rest.h
531 if test -f $srcdir/config/${cpu_type}/xm-$rest.h
532 then xm_file=${cpu_type}/xm-$rest.h
533 fi
534 if test -f $srcdir/config/${cpu_type}/t-$rest
535 then tmake_file=${cpu_type}/t-$rest
536 fi
537 ;;
538 alpha*-*-unicosmk*)
539 use_collect2=yes
540 tm_file="${tm_file} alpha/unicosmk.h"
542 # Don't include t-ieee for now because we don't support that yet
543 # tmake_file="alpha/t-ieee"
544 tmake_file="alpha/t-unicosmk"
545 use_fixproto=yes
546 ;;
547 alpha*-*-linux*)
548 tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
549 target_cpu_default="MASK_GAS"
550 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
551 ;;
552 alpha*-*-gnu*)
553 target_cpu_default="MASK_GAS"
554 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
555 ;;
556 alpha*-*-freebsd*)
557 tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
558 target_cpu_default="MASK_GAS"
559 tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
560 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
561 ;;
562 alpha*-*-netbsd*)
563 tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
564 target_cpu_default="MASK_GAS"
565 tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
566 ;;
567 alpha*-*-openbsd*)
568 tm_defines="OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
569 tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
570 # default x-alpha is only appropriate for dec-osf.
571 target_cpu_default="MASK_GAS"
572 tmake_file="alpha/t-alpha alpha/t-ieee"
573 ;;
574 alpha*-dec-osf[45]*)
575 if test x$stabs = xyes
576 then
577 tm_file="${tm_file} dbx.h"
578 fi
579 if test x$gas != xyes
580 then
581 extra_passes="mips-tfile mips-tdump"
582 fi
583 use_collect2=yes
584 tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
585 tm_file="${tm_file} alpha/osf.h"
586 extra_headers=va_list.h
587 case ${target} in
588 *-*-osf4*)
589 # Set target_cpu_default except on 4.0a.
590 case ${target} in
591 *-*-osf4.0a) ;;
592 *) target_cpu_default=MASK_SUPPORT_ARCH
593 esac
594 ;;
595 *-*-osf5*)
596 tm_file="${tm_file} alpha/osf5.h"
597 target_cpu_default=MASK_SUPPORT_ARCH
598 ;;
599 esac
600 case ${enable_threads} in
601 "" | yes | posix)
602 thread_file='posix'
603 tmake_file="${tmake_file} alpha/t-osf-pthread"
604 ;;
605 esac
606 ;;
607 alpha64-dec-*vms*)
608 tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
609 xm_file="alpha/xm-vms.h"
610 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
611 prefix=/gnu
612 local_prefix=/gnu
613 ;;
614 alpha*-dec-*vms*)
615 tm_file="${tm_file} alpha/vms.h"
616 xm_file=alpha/xm-vms.h
617 tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
618 prefix=/gnu
619 local_prefix=/gnu
620 ;;
621 arc-*-elf*)
622 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
623 extra_parts="crtinit.o crtfini.o"
624 use_fixproto=yes
625 ;;
626 arm-*-coff* | armel-*-coff*)
627 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
628 tmake_file=arm/t-arm-coff
629 ;;
630 arm-semi-aof | armel-semi-aof)
631 tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
632 tmake_file=arm/t-semi
633 ;;
634 arm-wrs-vxworks)
635 tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
636 tmake_file="${tmake_file} arm/t-vxworks"
637 ;;
638 arm*-*-freebsd*|strongarm*-*-freebsd*)
639 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
640 tmake_file="${tmake_file} arm/t-strongarm-elf"
641 ;;
642 arm*-*-netbsdelf*)
643 tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
644 tmake_file="${tmake_file} arm/t-netbsd"
645 ;;
646 arm*-*-netbsd*)
647 tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
648 tmake_file="t-netbsd arm/t-netbsd"
649 extra_parts=""
650 use_collect2=yes
651 ;;
652 arm*-*-linux*) # ARM GNU/Linux with ELF
653 tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h arm/aout.h arm/arm.h"
654 tmake_file="${tmake_file} arm/t-linux"
655 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
656 gnu_ld=yes
657 ;;
658 arm*-*-uclinux*) # ARM ucLinux
659 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
660 tmake_file=arm/t-arm-elf
661 ;;
662 arm*-*-ecos-elf)
663 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
664 tmake_file=arm/t-arm-elf
665 ;;
666 arm*-*-rtems*)
667 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
668 tmake_file="arm/t-arm-elf t-rtems"
669 ;;
670 arm*-*-elf | ep9312-*-elf)
671 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
672 tmake_file=arm/t-arm-elf
673 ;;
674 arm*-wince-pe*)
675 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
676 tmake_file=arm/t-wince-pe
677 extra_objs="pe.o"
678 ;;
679 arm-*-pe*)
680 tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
681 tmake_file=arm/t-pe
682 extra_objs="pe.o"
683 ;;
684 arm*-*-kaos*)
685 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
686 tmake_file=arm/t-arm-elf
687 ;;
688 avr-*-*)
689 tm_file="avr/avr.h dbxelf.h"
690 use_fixproto=yes
691 ;;
692 c4x-*-rtems* | tic4x-*-rtems*)
693 tmake_file="c4x/t-c4x t-rtems"
694 tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
695 c_target_objs="c4x-c.o"
696 cxx_target_objs="c4x-c.o"
697 ;;
698 c4x-* | tic4x-*)
699 tmake_file=c4x/t-c4x
700 c_target_objs="c4x-c.o"
701 cxx_target_objs="c4x-c.o"
702 ;;
703 cris-*-aout)
704 tm_file="dbxelf.h ${tm_file} cris/aout.h"
705 gas=yes
706 tmake_file="cris/t-cris cris/t-aout"
707 ;;
708 cris-*-elf | cris-*-none)
709 tm_file="dbxelf.h elfos.h ${tm_file}"
710 tmake_file="cris/t-cris cris/t-elfmulti"
711 gas=yes
712 ;;
713 cris-*-linux*)
714 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
715 # We need to avoid using t-linux, so override default tmake_file
716 tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
717 ;;
718 fr30-*-elf)
719 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
720 tmake_file=fr30/t-fr30
721 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
722 use_fixproto=yes
723 ;;
724 frv-*-elf)
725 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
726 tmake_file=frv/t-frv
727 use_fixproto=yes
728 ;;
729 frv-*-*linux*)
730 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
731 linux.h frv/linux.h frv/frv-abi.h"
732 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
733 ;;
734 h8300-*-rtems*)
735 tmake_file="h8300/t-h8300 t-rtems"
736 tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
737 ;;
738 h8300-*-elf*)
739 tmake_file="h8300/t-h8300 h8300/t-elf"
740 tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
741 use_fixproto=yes
742 ;;
743 h8300-*-*)
744 tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
745 use_fixproto=yes
746 ;;
747 hppa*64*-*-linux* | parisc*64*-*-linux*)
748 target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_BIG_SWITCH)"
749 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
750 pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
751 tmake_file="${tmake_file} pa/t-linux64"
752 gas=yes gnu_ld=yes
753 need_64bit_hwint=yes
754 ;;
755 hppa*-*-linux* | parisc*-*-linux*)
756 target_cpu_default="(MASK_PA_11 | MASK_NO_SPACE_REGS | MASK_BIG_SWITCH)"
757 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
758 pa/pa32-regs.h pa/pa32-linux.h"
759 tmake_file="${tmake_file} pa/t-linux"
760 # if not configured with --enable-sjlj-exceptions, bump the
761 # libgcc version number
762 if test x$sjlj != x1; then
763 tmake_file="$tmake_file pa/t-slibgcc-elf-ver"
764 fi
765 ;;
766 # port not yet contributed.
767 #hppa*-*-openbsd*)
768 # target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
769 # ;;
770 hppa1.1-*-pro*)
771 target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT | MASK_BIG_SWITCH)"
772 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
773 tmake_file="pa/t-pro"
774 ;;
775 hppa1.1-*-osf*)
776 target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
777 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
778 tmake_file="pa/t-pa"
779 use_collect2=yes
780 ;;
781 hppa1.1-*-rtems*)
782 target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT | MASK_BIG_SWITCH)"
783 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h rtems.h"
784 tmake_file="pa/t-pro t-rtems"
785 ;;
786 hppa1.1-*-bsd*)
787 target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
788 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
789 tmake_file="pa/t-pa"
790 use_collect2=yes
791 ;;
792 hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
793 target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
794 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
795 tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
796 case ${enable_threads} in
797 "")
798 if test x$have_pthread_h = xyes ; then
799 tmake_file="${tmake_file} pa/t-dce-thr"
800 fi
801 ;;
802 yes | dce)
803 tmake_file="${tmake_file} pa/t-dce-thr"
804 ;;
805 esac
806 use_collect2=yes
807 use_fixproto=yes
808 ;;
809 hppa1.0-*-hpux10*)
810 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
811 tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
812 case ${enable_threads} in
813 "")
814 if test x$have_pthread_h = xyes ; then
815 tmake_file="${tmake_file} pa/t-dce-thr"
816 fi
817 ;;
818 yes | dce)
819 tmake_file="${tmake_file} pa/t-dce-thr"
820 ;;
821 esac
822 use_collect2=yes
823 use_fixproto=yes
824 ;;
825 hppa*64*-*-hpux11*)
826 if test x$gnu_ld = xyes
827 then
828 target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_GAS | MASK_GNU_LD | MASK_BIG_SWITCH)"
829 else
830 target_cpu_default="(MASK_PA_11 | MASK_PA_20 | MASK_GAS | MASK_BIG_SWITCH)"
831 fi
832 if test x$gas = xyes
833 then
834 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
835 pa/pa64-regs.h pa/pa-hpux.h \
836 pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
837 else
838 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
839 pa/pa64-regs.h pa/pa-hpux.h \
840 pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
841 fi
842 need_64bit_hwint=yes
843 tmake_file="pa/t-pa64 pa/t-pa-hpux"
844 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
845 case x${enable_threads} in
846 xyes | xposix )
847 thread_file=posix
848 ;;
849 esac
850 ;;
851 hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
852 target_cpu_default="(MASK_PA_11 | MASK_BIG_SWITCH)"
853 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
854 tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
855 case x${enable_threads} in
856 xyes | xposix )
857 thread_file=posix
858 ;;
859 esac
860 use_collect2=yes
861 ;;
862 hppa1.0-*-hpux11*)
863 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
864 tmake_file="pa/t-pa pa/t-pa-hpux pa/t-hpux-shlib"
865 case x${enable_threads} in
866 xyes | xposix )
867 thread_file=posix
868 ;;
869 esac
870 use_collect2=yes
871 ;;
872 i[34567]86-*-darwin*)
873 tm_file="${tm_file} i386/darwin.h"
874 ;;
875 i[34567]86-*-elf*)
876 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
877 tmake_file="i386/t-i386elf t-svr4"
878 use_fixproto=yes
879 ;;
880 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
881 if test x$gas = xyes
882 then
883 tm_file="${tm_file} usegas.h"
884 fi
885 xm_defines="SMALL_ARG_MAX"
886 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
887 tmake_file=t-svr4
888 extra_parts="crtbegin.o crtend.o"
889 use_fixproto=yes
890 ;;
891 i[34567]86-*-aout*)
892 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
893 use_fixproto=yes
894 ;;
895 i[34567]86-*-beoself* | i[34567]86-*-beos*)
896 tmake_file='i386/t-beos i386/t-crtpic'
897 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
898 extra_parts='crtbegin.o crtend.o'
899 ;;
900 i[34567]86-*-freebsd*)
901 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
902 ;;
903 x86_64-*-freebsd*)
904 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
905 ;;
906 i[34567]86-*-netbsdelf*)
907 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
908 ;;
909 i[34567]86-*-netbsd*)
910 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
911 tmake_file=t-netbsd
912 extra_parts=""
913 use_collect2=yes
914 ;;
915 x86_64-*-netbsd*)
916 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
917 ;;
918 i[34567]86-*-openbsd*)
919 tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
920 # needed to unconfuse gdb
921 tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
922 # we need collect2 until our bug is fixed...
923 use_collect2=yes
924 ;;
925 i[34567]86-*-coff*)
926 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
927 use_fixproto=yes
928 ;;
929 i[34567]86-*-linux*) # Intel 80386's running GNU/Linux
930 # with ELF format using glibc 2
931 # aka GNU/Linux C library 6
932 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
933 tmake_file="${tmake_file} i386/t-crtstuff"
934 ;;
935 x86_64-*-linux*)
936 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
937 i386/x86-64.h i386/linux64.h"
938 tmake_file="${tmake_file} i386/t-linux64"
939 ;;
940 i[34567]86-*-kfreebsd*-gnu) # must be before i[34567]86-*-gnu*
941 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h kfreebsdgnu.h i386/kfreebsdgnu.h"
942 tmake_file="t-slibgcc-elf-ver t-kfreebsd-gnu i386/t-crtstuff"
943 float_format=i386
944 use_fixproto=no
945 ;;
946 i[34567]86-*-gnu*)
947 ;;
948 i[34567]86-pc-msdosdjgpp*)
949 xm_file=i386/xm-djgpp.h
950 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
951 tmake_file=i386/t-djgpp
952 gnu_ld=yes
953 gas=yes
954 ;;
955 i[34567]86-*-lynxos*)
956 if test x$gas = xyes
957 then
958 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h svr3.h lynx.h i386/lynx.h"
959 else
960 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h lynx-ng.h i386/lynx-ng.h"
961 fi
962 use_fixproto=yes
963 ;;
964 i[34567]86-*-nto-qnx*)
965 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
966 tmake_file=i386/t-nto
967 gnu_ld=yes
968 gas=yes
969 ;;
970 i[34567]86-*-rtems*)
971 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
972 extra_parts="crtbegin.o crtend.o crti.o crtn.o"
973 tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
974 ;;
975 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
976 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
977 if test x$gas = xyes
978 then
979 tm_file="usegas.h ${tm_file}"
980 fi
981 tmake_file=i386/t-sco5
982 extra_parts="crtbegin.o crtend.o"
983 use_fixproto=yes
984 ;;
985 i[34567]86-*-solaris2*)
986 xm_defines="SMALL_ARG_MAX"
987 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h i386/sol2.h"
988 tmake_file="i386/t-sol2 t-svr4"
989 if test x$gnu_ld = xyes; then
990 tmake_file="$tmake_file t-slibgcc-elf-ver"
991 else
992 tmake_file="$tmake_file t-slibgcc-sld"
993 fi
994 case ${target} in
995 *-*-solaris2.[789] | *-*-solaris2.1[0-9])
996 tm_file="$tm_file tm-dwarf2.h"
997 ;;
998 esac
999 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1000 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1001 no:*:*) ;;
1002 *:yes:* ) thread_file=posix ;;
1003 yes:*:* | *:*:yes ) thread_file=solaris ;;
1004 esac
1005 ;;
1006 i[34567]86-*-sysv5*) # Intel x86 on System V Release 5
1007 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1008 if test x$stabs = xyes
1009 then
1010 tm_file="${tm_file} dbx.h"
1011 fi
1012 tmake_file="i386/t-crtpic t-svr4"
1013 extra_parts="crtbegin.o crtend.o"
1014 if test x$enable_threads = xyes; then
1015 thread_file='posix'
1016 fi
1017 use_fixproto=yes
1018 ;;
1019 i[34567]86-*-sysv4*) # Intel 80386's running system V.4
1020 xm_defines="SMALL_ARG_MAX"
1021 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1022 if test x$stabs = xyes
1023 then
1024 tm_file="${tm_file} dbx.h"
1025 fi
1026 tmake_file="i386/t-crtpic t-svr4"
1027 extra_parts="crtbegin.o crtend.o"
1028 use_fixproto=yes
1029 ;;
1030 i[4567]86-wrs-vxworks)
1031 tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/vxworks.h"
1032 tmake_file="${tmake_file} i386/t-vxworks"
1033 ;;
1034 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1035 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1036 xm_file=i386/xm-cygwin.h
1037 tmake_file="i386/t-cygwin i386/t-cygming"
1038 extra_objs=winnt.o
1039 c_target_objs=cygwin2.o
1040 cxx_target_objs=cygwin2.o
1041 extra_gcc_objs=cygwin1.o
1042 if test x$enable_threads = xyes; then
1043 thread_file='posix'
1044 fi
1045 ;;
1046 i[34567]86-*-mingw32*)
1047 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1048 xm_file=i386/xm-mingw32.h
1049 tmake_file="i386/t-cygming i386/t-mingw32"
1050 extra_objs=winnt.o
1051 if test x$enable_threads = xyes; then
1052 thread_file='win32'
1053 fi
1054 case ${target} in
1055 *mingw32crt*)
1056 tm_file="${tm_file} i386/crtdll.h"
1057 ;;
1058 *mingw32msv* | *mingw32*)
1059 ;;
1060 esac
1061 ;;
1062 i[34567]86-*-uwin*)
1063 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1064 tmake_file="i386/t-cygwin i386/t-uwin"
1065 extra_objs=winnt.o
1066 if test x$enable_threads = xyes; then
1067 thread_file='win32'
1068 fi
1069 use_fixproto=yes
1070 ;;
1071 i[34567]86-*-interix3*)
1072 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1073 tmake_file="i386/t-interix"
1074 extra_objs=winnt.o
1075 if test x$enable_threads = xyes ; then
1076 thread_file='posix'
1077 fi
1078 if test x$stabs = xyes ; then
1079 tm_file="${tm_file} dbxcoff.h"
1080 fi
1081 ;;
1082 i[34567]86-*-kaos*)
1083 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1084 tmake_file="i386/t-i386elf t-svr4"
1085 ;;
1086 i860-*-sysv4*)
1087 tm_file="${tm_file} elfos.h svr4.h i860/sysv4.h"
1088 tmake_file="i860/t-i860 i860/t-svr4"
1089 extra_parts="crtbegin.o crtend.o"
1090 use_fixproto=yes
1091 ;;
1092 ia64*-*-elf*)
1093 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1094 tmake_file="ia64/t-ia64"
1095 target_cpu_default="0"
1096 if test x$gas = xyes
1097 then
1098 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1099 fi
1100 if test x$gnu_ld = xyes
1101 then
1102 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1103 fi
1104 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1105 use_fixproto=yes
1106 ;;
1107 ia64*-*-freebsd*)
1108 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1109 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1110 tmake_file="${tmake_file} ia64/t-ia64"
1111 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1112 ;;
1113 ia64*-*-linux*)
1114 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1115 tmake_file="${tmake_file} ia64/t-ia64 ia64/t-glibc"
1116 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1117 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1118 if test x"$use_libunwind_exceptions" = xyes; then
1119 tmake_file="$tmake_file t-libunwind"
1120 fi
1121 ;;
1122 ia64*-*-hpux*)
1123 tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1124 tmake_file="ia64/t-ia64 ia64/t-hpux"
1125 target_cpu_default="MASK_GNU_AS"
1126 case x$enable_threads in
1127 xyes | xposix )
1128 thread_file=posix
1129 ;;
1130 esac
1131 use_collect2=no
1132 c_target_objs="ia64-c.o"
1133 cxx_target_objs="ia64-c.o"
1134 # If we decide to run fixproto we should define FIXPROTO_DEFINES
1135 # in ia64/t-hpux, and also fix the definition of putenv in
1136 # sys-protos.h (const char not char).
1137 ;;
1138 ip2k-*-elf)
1139 tm_file="elfos.h ${tm_file}"
1140 use_fixproto=yes
1141 ;;
1142 iq2000*-*-elf*)
1143 tm_file="svr4.h elfos.h iq2000/iq2000.h"
1144 tmake_file=iq2000/t-iq2000
1145 out_file=iq2000/iq2000.c
1146 md_file=iq2000/iq2000.md
1147 use_fixproto=yes
1148 ;;
1149 m32r-*-elf*)
1150 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1151 extra_parts="crtinit.o crtfini.o"
1152 use_fixproto=yes
1153 ;;
1154 m32rle-*-elf*)
1155 tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1156 extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1157 use_fixproto=yes
1158 ;;
1159 m32r-*-linux*)
1160 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1161 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1162 # We override the tmake_file for linux -- why?
1163 tmake_file="m32r/t-linux"
1164 gnu_ld=yes
1165 use_fixproto=yes
1166 if test x$enable_threads = xyes; then
1167 thread_file='posix'
1168 fi
1169 ;;
1170 m32rle-*-linux*)
1171 tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1172 extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1173 # We override the tmake_file for linux -- why?
1174 tmake_file="m32r/t-linux"
1175 gnu_ld=yes
1176 use_fixproto=yes
1177 if test x$enable_threads = xyes; then
1178 thread_file='posix'
1179 fi
1180 ;;
1181 # m68hc11 and m68hc12 share the same machine description.
1182 m68hc11-*-*|m6811-*-*)
1183 tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1184 tm_p_file="m68hc11/m68hc11-protos.h"
1185 md_file="m68hc11/m68hc11.md"
1186 out_file="m68hc11/m68hc11.c"
1187 tmake_file="m68hc11/t-m68hc11-gas"
1188 use_fixproto=yes
1189 ;;
1190 m68hc12-*-*|m6812-*-*)
1191 tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1192 tm_p_file="m68hc11/m68hc11-protos.h"
1193 md_file="m68hc11/m68hc11.md"
1194 out_file="m68hc11/m68hc11.c"
1195 tmake_file="m68hc11/t-m68hc11-gas"
1196 use_fixproto=yes
1197 ;;
1198 m68k-*-aout*)
1199 tmake_file=m68k/t-m68kbare
1200 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1201 ;;
1202 m68k-*-coff*)
1203 tmake_file=m68k/t-m68kbare
1204 tm_defines="MOTOROLA USE_GAS"
1205 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1206 use_fixproto=yes
1207 ;;
1208 m68020-*-elf* | m68k-*-elf*)
1209 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1210 tm_defines="MOTOROLA USE_GAS"
1211 tmake_file=m68k/t-m68kelf
1212 extra_parts="crtbegin.o crtend.o"
1213 use_fixproto=yes
1214 ;;
1215 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1216 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1217 tm_defines="MOTOROLA USE_GAS"
1218 case ${target} in
1219 m68010*)
1220 target_cpu_default="0"
1221 ;;
1222 *)
1223 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1224 ;;
1225 esac
1226 ;;
1227 m68k*-*-openbsd*)
1228 # needed to unconfuse gdb
1229 tm_defines="OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1230 tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1231 tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1232 # we need collect2 until our bug is fixed...
1233 use_collect2=yes
1234 ;;
1235 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux with uClibc
1236 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1237 tm_defines="MOTOROLA USE_GAS"
1238 tmake_file=m68k/t-uclinux
1239 use_fixproto=no
1240 ;;
1241 m68k-*-linux*) # Motorola m68k's running GNU/Linux
1242 # with ELF format using glibc 2
1243 # aka the GNU/Linux C library 6.
1244 tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1245 tm_defines="MOTOROLA USE_GAS"
1246 # if not configured with --enable-sjlj-exceptions, bump the
1247 # libgcc version number
1248 if test x$sjlj != x1; then
1249 tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1250 fi
1251 ;;
1252 m68k-*-rtems*)
1253 tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1254 tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1255 tm_defines="MOTOROLA USE_GAS"
1256 extra_parts="crtbegin.o crtend.o"
1257 ;;
1258 mcore-*-elf)
1259 tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1260 tmake_file=mcore/t-mcore
1261 use_fixproto=yes
1262 ;;
1263 mcore-*-pe*)
1264 tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1265 tmake_file=mcore/t-mcore-pe
1266 use_fixproto=yes
1267 ;;
1268 mips-sgi-irix6*) # SGI System V.4., IRIX 6
1269 tm_file="${tm_file} mips/iris5.h mips/iris6.h"
1270 tmake_file="mips/t-iris mips/t-iris5-6 mips/t-iris6"
1271 if test x$gas = xyes
1272 then
1273 tm_file="${tm_file} mips/iris6gas.h"
1274 fi
1275 if test "x$gnu_ld" = xyes
1276 then
1277 tm_file="${tm_file} mips/iris6gld.h"
1278 tmake_file="$tmake_file mips/t-irix-gld"
1279 fi
1280 target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
1281 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1282 # See comment in mips/iris5.h file. Only enabled for O32 ABI
1283 # without GNU as.
1284 if test x$gas = xno
1285 then
1286 use_collect2=yes
1287 fi
1288 # if test x$enable_threads = xyes; then
1289 # thread_file='irix'
1290 # fi
1291 use_fixproto=yes
1292 ;;
1293 mips-sgi-irix5cross64) # Irix5 host, Irix 6 target, cross64
1294 tm_file="${tm_file} mips/iris5.h mips/iris6.h mips/cross64.h"
1295 tmake_file="mips/t-iris mips/t-cross64"
1296 target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
1297 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1298 # See comment in mips/iris[56].h files.
1299 use_collect2=yes
1300 # if test x$enable_threads = xyes; then
1301 # thread_file='irix'
1302 # fi
1303 use_fixproto=yes
1304 ;;
1305 mips-sgi-irix5*) # SGI System V.4., IRIX 5
1306 tm_file="${tm_file} mips/iris5.h"
1307 if test x$gas = xyes
1308 then
1309 tm_file="${tm_file} mips/sdb.h mips/iris5gas.h"
1310 if test x$stabs = xyes
1311 then
1312 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1313 fi
1314 tmake_file=mips/t-iris5-gas
1315 else
1316 tmake_file=mips/t-iris5-as
1317 fi
1318 if test "x$gnu_ld" = xyes
1319 then
1320 tm_file="${tm_file} mips/iris5gld.h"
1321 tmake_file="$tmake_file mips/t-irix-gld"
1322 fi
1323 tmake_file="${tmake_file} mips/t-iris mips/t-iris5-6"
1324 target_cpu_default="MASK_ABICALLS"
1325 # mips-tfile doesn't work yet
1326 # See comment in mips/iris5.h file.
1327 if test x$gas = xno
1328 then
1329 use_collect2=yes
1330 fi
1331 # if test x$enable_threads = xyes; then
1332 # thread_file='irix'
1333 # fi
1334 use_fixproto=yes
1335 ;;
1336 mips*-*-netbsd*) # NetBSD/mips, either endian.
1337 target_cpu_default="MASK_GAS|MASK_ABICALLS"
1338 tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1339 ;;
1340 mips64*-*-linux*)
1341 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1342 tmake_file="${tmake_file} mips/t-linux64"
1344 # This default ABI is a partial lie: t-linux64 overrides the
1345 # DRIVER_SELF_SPEC that sets the default abi, in the spec file
1346 # that is installed. What GCC thinks of as the default must
1347 # remain as ABI_32 such that the SONAMEs of the libgcc shared
1348 # libraries remain compatible with those of mips-linux-gnu.
1349 tm_defines="MIPS_ISA_DEFAULT=1 MIPS_ABI_DEFAULT=ABI_32"
1350 target_cpu_default="MASK_ABICALLS|MASK_FLOAT64|MASK_64BIT"
1351 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
1352 gnu_ld=yes
1353 gas=yes
1354 ;;
1355 mips*-*-linux*) # Linux MIPS, either endian.
1356 tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1357 case ${target} in
1358 mipsisa32*-*)
1359 target_cpu_default="MASK_SOFT_FLOAT"
1360 tm_defines="MIPS_ISA_DEFAULT=32"
1361 ;;
1362 esac
1363 ;;
1364 mips*-*-openbsd*)
1365 tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1366 target_cpu_default="MASK_GAS|MASK_ABICALLS"
1367 tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1368 case ${target} in
1369 mips*el-*-openbsd*)
1370 tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1371 *) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1372 esac
1373 ;;
1374 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1375 tm_file="${tm_file} mips/elf.h"
1376 tmake_file=mips/t-isa3264
1377 tm_defines="MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1378 use_fixproto=yes
1379 ;;
1380 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1381 tm_file="${tm_file} mips/elf.h"
1382 tmake_file=mips/t-isa3264
1383 tm_defines="MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1384 use_fixproto=yes
1385 ;;
1386 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1387 tm_file="${tm_file} mips/elf.h"
1388 tmake_file=mips/t-isa3264
1389 target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
1390 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1391 use_fixproto=yes
1392 ;;
1393 mipsisa64sr71k-*-elf*)
1394 tm_file="${tm_file} mips/elf.h"
1395 tmake_file=mips/t-sr71k
1396 target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
1397 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1398 use_fixproto=yes
1399 ;;
1400 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1401 tm_file="${tm_file} mips/elf.h"
1402 tmake_file=mips/t-elf
1403 target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
1404 tm_defines="MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1405 use_fixproto=yes
1406 ;;
1407 mips-*-elf* | mipsel-*-elf*)
1408 tm_file="${tm_file} mips/elf.h"
1409 tmake_file=mips/t-elf
1410 use_fixproto=yes
1411 ;;
1412 mips64-*-elf* | mips64el-*-elf*)
1413 tm_file="${tm_file} mips/elf64.h"
1414 tmake_file=mips/t-elf
1415 target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
1416 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1417 use_fixproto=yes
1418 ;;
1419 mips64vr-*-elf* | mips64vrel-*-elf*)
1420 tm_file="mips/vr.h ${tm_file} mips/elf64.h"
1421 tmake_file=mips/t-vr
1422 use_fixproto=yes
1423 ;;
1424 mips64orion-*-elf* | mips64orionel-*-elf*)
1425 tm_file="${tm_file} mips/elforion.h mips/elf64.h"
1426 tmake_file=mips/t-elf
1427 target_cpu_default="MASK_64BIT|MASK_FLOAT64|MASK_GAS"
1428 tm_defines="MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1429 use_fixproto=yes
1430 ;;
1431 mips*-*-rtems*)
1432 tm_file="${tm_file} mips/elf.h mips/rtems.h rtems.h"
1433 tmake_file="mips/t-elf t-rtems mips/t-rtems"
1434 ;;
1435 mips-wrs-vxworks)
1436 # We want vxworks.h after mips/elf.h, which unfortunately means we
1437 # have to redo the tm_file list from scratch.
1438 tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1439 tmake_file="${tmake_file} mips/t-vxworks"
1440 target_cpu_default="MASK_GAS"
1441 ;;
1442 mips-wrs-windiss) # Instruction-level simulator for VxWorks.
1443 xm_defines=POSIX
1444 tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1445 tmake_file="${tmake_file} mips/t-elf"
1446 target_cpu_default="MASK_GAS"
1447 thread_file=
1448 ;;
1449 mipstx39-*-elf* | mipstx39el-*-elf*)
1450 tm_file="${tm_file} mips/r3900.h mips/elf.h"
1451 tmake_file=mips/t-r3900
1452 use_fixproto=yes
1453 ;;
1454 mmix-knuth-mmixware)
1455 need_64bit_hwint=yes
1456 ;;
1457 mn10300-*-*)
1458 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1459 if test x$stabs = xyes
1460 then
1461 tm_file="${tm_file} dbx.h"
1462 fi
1463 use_collect2=no
1464 use_fixproto=yes
1465 ;;
1466 ns32k-*-netbsdelf*)
1467 echo "GCC does not yet support the ${target} target"; exit 1
1468 ;;
1469 ns32k-*-netbsd*)
1470 tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1471 # On NetBSD, the headers are already okay, except for math.h.
1472 tmake_file="t-netbsd ns32k/t-ns32k"
1473 extra_parts=""
1474 use_collect2=yes
1475 ;;
1476 pdp11-*-bsd)
1477 tm_file="${tm_file} pdp11/2bsd.h"
1478 use_fixproto=yes
1479 ;;
1480 pdp11-*-*)
1481 use_fixproto=yes
1482 ;;
1483 avr-*-*)
1484 use_fixproto=yes
1485 ;;
1486 # port not yet contributed
1487 #powerpc-*-openbsd*)
1488 # tmake_file="${tmake_file} rs6000/t-fprules "
1489 # extra_headers=
1490 # ;;
1491 powerpc64-*-linux*)
1492 tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1493 case x$with_cpu in
1494 x|xpowerpc64|xdefault64) tm_file="${tm_file} rs6000/default64.h";;
1495 esac
1496 tm_file="${tm_file} rs6000/linux64.h"
1497 tmake_file="rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
1498 ;;
1499 powerpc64-*-gnu*)
1500 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1501 tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
1502 ;;
1503 powerpc-*-beos*)
1504 tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1505 tmake_file="rs6000/t-fprules rs6000/t-beos"
1506 extra_headers=
1507 use_fixproto=yes
1508 ;;
1509 powerpc-*-darwin*)
1510 tm_file="${tm_file} rs6000/darwin.h"
1511 tmake_file="${tmake_file} rs6000/t-darwin"
1512 extra_headers=altivec.h
1513 ;;
1514 powerpc*-*-freebsd*)
1515 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1516 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1517 ;;
1518 powerpc-*-netbsd*)
1519 tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1520 tmake_file="${tmake_file} rs6000/t-netbsd"
1521 ;;
1522 powerpc-*-chorusos*)
1523 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1524 tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1525 case ${enable_threads} in
1526 yes | posix)
1527 thread_file='posix'
1528 ;;
1529 esac
1530 use_fixproto=yes
1531 ;;
1532 powerpc-*-eabispe*)
1533 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1534 tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1535 ;;
1536 powerpc-*-eabisimaltivec*)
1537 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1538 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1539 ;;
1540 powerpc-*-eabisim*)
1541 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1542 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1543 ;;
1544 powerpc-*-elf*)
1545 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1546 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1547 use_fixproto=yes
1548 ;;
1549 powerpc-*-eabialtivec*)
1550 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1551 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1552 ;;
1553 powerpc-*-eabi*)
1554 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1555 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1556 ;;
1557 powerpc-*-rtems*)
1558 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1559 tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1560 ;;
1561 powerpc-*-linux*altivec*)
1562 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1563 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1564 ;;
1565 powerpc-*-linux*spe*)
1566 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1567 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1568 ;;
1569 powerpc-*-linux*)
1570 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h"
1571 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1572 ;;
1573 powerpc-*-gnu-gnualtivec*)
1574 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1575 tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1576 if test x$enable_threads = xyes; then
1577 thread_file='posix'
1578 fi
1579 ;;
1580 powerpc-*-gnu*)
1581 tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1582 tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1583 if test x$enable_threads = xyes; then
1584 thread_file='posix'
1585 fi
1586 ;;
1587 powerpc-wrs-vxworks*)
1588 # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1589 # means we have to redo the tm_file list from scratch.
1590 tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1591 tm_file="${tm_file} vxworks.h rs6000/vxworks.h"
1592 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
1593 extra_headers=ppc-asm.h
1594 ;;
1595 powerpc-wrs-windiss*) # Instruction-level simulator for VxWorks.
1596 tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1597 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1598 thread_file=""
1599 use_fixproto=yes
1600 ;;
1601 powerpcle-*-sysv*)
1602 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1603 tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1604 use_fixproto=yes
1605 ;;
1606 powerpcle-*-elf*)
1607 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1608 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1609 use_fixproto=yes
1610 ;;
1611 powerpcle-*-eabisim*)
1612 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1613 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1614 ;;
1615 powerpcle-*-eabi*)
1616 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1617 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1618 ;;
1619 powerpc-*-kaos*)
1620 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1621 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1622 ;;
1623 powerpcle-*-kaos*)
1624 tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1625 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1626 ;;
1627 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1628 tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1629 tmake_file="rs6000/t-fprules rs6000/t-newas"
1630 use_collect2=yes
1631 extra_headers=
1632 use_fixproto=yes
1633 ;;
1634 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1635 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1636 tmake_file=rs6000/t-aix43
1637 use_collect2=yes
1638 thread_file='aix'
1639 extra_headers=
1640 ;;
1641 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1642 tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1643 tmake_file=rs6000/t-aix43
1644 use_collect2=yes
1645 thread_file='aix'
1646 extra_headers=
1647 ;;
1648 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1649 tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1650 tmake_file=rs6000/t-aix52
1651 use_collect2=yes
1652 thread_file='aix'
1653 extra_headers=
1654 ;;
1655 rs6000-*-lynxos*)
1656 tm_file="svr3.h lynx.h rs6000/lynxbase.h rs6000/rs6000.h rs6000/lynx.h"
1657 tmake_file=rs6000/t-fprules
1658 use_collect2=yes
1659 use_fixproto=yes
1660 ;;
1661 s390-*-linux*)
1662 tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1663 tmake_file="${tmake_file} s390/t-crtstuff"
1664 ;;
1665 s390x-*-linux*)
1666 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1667 tm_p_file=s390/s390-protos.h
1668 md_file=s390/s390.md
1669 extra_modes=s390/s390-modes.def
1670 out_file=s390/s390.c
1671 tmake_file="${tmake_file} s390/t-crtstuff s390/t-linux64"
1672 ;;
1673 s390x-ibm-tpf*)
1674 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1675 tm_p_file=s390/s390-protos.h
1676 md_file=s390/s390.md
1677 extra_modes=s390/s390-modes.def
1678 extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
1679 out_file=s390/s390.c
1680 tmake_file="t-slibgcc-elf-ver s390/t-crtstuff s390/t-tpf"
1681 ;;
1682 sh-*-elf* | sh[2346l]*-*-elf* | sh*-*-kaos*)
1683 tmake_file="sh/t-sh sh/t-elf"
1684 case ${target} in
1685 shl* | sh[234]l* | sh64l*)
1686 tm_file="sh/little.h ${tm_file}"
1687 tmake_file="${tmake_file} sh/t-le"
1688 ;;
1689 esac
1690 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h"
1691 case ${target} in
1692 sh64*)
1693 tmake_file="${tmake_file} sh/t-sh64"
1694 tm_file="${tm_file} sh/sh64.h"
1695 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1696 ;;
1697 sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
1698 sh4*) target_cpu_default="SELECT_SH4" ;;
1699 sh3e*) target_cpu_default="SELECT_SH3E" ;;
1700 sh3*) target_cpu_default="SELECT_SH3" ;;
1701 sh2e*) target_cpu_default="SELECT_SH2E" ;;
1702 sh2*) target_cpu_default="SELECT_SH2" ;;
1703 esac
1704 case ${target} in
1705 sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
1706 esac
1707 case ${target} in
1708 sh*-*-kaos*) tm_file="${tm_file} kaos.h sh/kaos-sh.h" ;;
1709 esac
1710 use_fixproto=yes
1711 ;;
1712 sh-*-rtemscoff*)
1713 tmake_file="sh/t-sh t-rtems"
1714 tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
1715 ;;
1716 sh-*-rtems*)
1717 tmake_file="sh/t-sh sh/t-elf t-rtems"
1718 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
1719 ;;
1720 sh-*-linux* | sh[2346lbe]*-*-linux*)
1721 tmake_file="sh/t-sh sh/t-elf ${tmake_file}"
1722 case ${target} in
1723 sh*be-*-* | sh*eb-*-*) ;;
1724 *)
1725 tm_file="sh/little.h ${tm_file}"
1726 tmake_file="${tmake_file} sh/t-le"
1727 ;;
1728 esac
1729 tmake_file="${tmake_file} sh/t-linux"
1730 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
1731 case ${target} in
1732 sh64*)
1733 tmake_file="${tmake_file} sh/t-sh64"
1734 tm_file="${tm_file} sh/sh64.h"
1735 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1736 ;;
1737 sh4_single*) target_cpu_default="SELECT_SH4_SINGLE" ;;
1738 sh4*) target_cpu_default="SELECT_SH4" ;;
1739 sh3e[lb]e*) target_cpu_default="SELECT_SH3E" ;;
1740 sh3e[lb]*) target_cpu_default="SELECT_SH3" ;;
1741 sh3e*) target_cpu_default="SELECT_SH3E" ;;
1742 sh3*) target_cpu_default="SELECT_SH3" ;;
1743 sh2e[lb]e*) target_cpu_default="SELECT_SH2E" ;;
1744 sh2e[lb]*) target_cpu_default="SELECT_SH2" ;;
1745 sh2e*) target_cpu_default="SELECT_SH2E" ;;
1746 sh2*) target_cpu_default="SELECT_SH2" ;;
1747 esac
1748 case ${target} in
1749 sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
1750 esac
1751 ;;
1752 sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1753 sh64-*-netbsd* | sh64l*-*-netbsd*)
1754 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h"
1755 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1756 case ${target} in
1757 sh*l*-*)
1758 tm_file="sh/little.h ${tm_file}"
1759 tmake_file="${tmake_file} sh/t-le"
1760 ;;
1761 *)
1762 tmake_file="${tmake_file} sh/t-be"
1763 ;;
1764 esac
1765 case ${target} in
1766 sh5*-*)
1767 # SHmedia, 32-bit ABI
1768 target_cpu_default="SH5_BIT|SH4_BIT|SH3_BIT|SH_E_BIT"
1769 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5"
1770 ;;
1771 sh64*-*)
1772 # SHmedia, 64-bit ABI
1773 target_cpu_default="SH5_BIT|SH4_BIT"
1774 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd-sh5 sh/t-netbsd-sh5-64"
1775 ;;
1776 *)
1777 # SH3, software floating point
1778 target_cpu_default="SH1_BIT|SH2_BIT|SH3_BIT"
1779 tmake_file="${tmake_file} sh/t-netbsd"
1780 ;;
1781 esac
1782 ;;
1783 sh-wrs-vxworks)
1784 tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
1785 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
1786 ;;
1787 sh-*-*)
1788 tm_file="${tm_file} dbxcoff.h sh/coff.h"
1789 use_fixproto=yes
1790 ;;
1791 sparc-*-netbsdelf*)
1792 tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
1793 ;;
1794 sparc-*-openbsd*)
1795 tm_defines=OBSD_OLD_GAS
1796 tm_file="sparc/sparc.h openbsd.h sparc/openbsd.h"
1797 # needed to unconfuse gdb
1798 tmake_file="t-libc-ok t-openbsd sparc/t-openbsd"
1799 # we need collect2 until our bug is fixed...
1800 use_collect2=yes
1801 ;;
1802 sparc64-*-openbsd*)
1803 tm_file="sparc/openbsd1-64.h sparc/sparc.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
1804 gas=yes gnu_ld=yes
1805 with_cpu=ultrasparc
1806 ;;
1807 sparc-*-elf*)
1808 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h"
1809 tmake_file="sparc/t-elf sparc/t-crtfm"
1810 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1811 use_fixproto=yes
1812 ;;
1813 sparc-*-linux*) # SPARC's running GNU/Linux, libc6
1814 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
1815 tmake_file="${tmake_file} sparc/t-crtfm"
1816 ;;
1817 sparc-*-rtems*)
1818 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/rtemself.h rtems.h"
1819 tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
1820 extra_parts="crti.o crtn.o crtbegin.o crtend.o"
1821 ;;
1822 sparc64-*-solaris2* | sparcv9-*-solaris2*)
1823 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h tm-dwarf2.h"
1824 if test x$gnu_ld = xyes; then
1825 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
1826 fi
1827 if test x$gas = xyes; then
1828 tm_file="${tm_file} sparc/sol2-gas-bi.h"
1829 fi
1830 tmake_file="sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
1831 if test x$gnu_ld = xyes; then
1832 tmake_file="$tmake_file t-slibgcc-elf-ver"
1833 else
1834 tmake_file="$tmake_file t-slibgcc-sld"
1835 fi
1836 extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
1837 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1838 no:*:*) ;;
1839 *:yes:* ) thread_file=posix ;;
1840 yes:*:* | *:*:yes ) thread_file=solaris ;;
1841 esac
1842 need_64bit_hwint=yes
1843 ;;
1844 sparc-*-solaris2*)
1845 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h"
1846 if test x$gnu_ld = xyes; then
1847 tm_file="${tm_file} sparc/sol2-gld.h"
1848 fi
1849 tmake_file="sparc/t-sol2 sparc/t-crtfm"
1850 if test x$gnu_ld = xyes; then
1851 tmake_file="$tmake_file t-slibgcc-elf-ver"
1852 else
1853 tmake_file="$tmake_file t-slibgcc-sld"
1854 fi
1855 case ${target} in
1856 *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1857 if test x$gnu_ld = xno; then
1858 tm_file="${tm_file} sparc/sol26-sld.h"
1859 fi
1860 ;;
1861 *-*-solaris2.[789] | *-*-solaris2.1[0-9])
1862 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h tm-dwarf2.h"
1863 if test x$gnu_ld = xyes; then
1864 tm_file="${tm_file} sparc/sol2-gld-bi.h"
1865 fi
1866 if test x$gas = xyes; then
1867 tm_file="${tm_file} sparc/sol2-gas-bi.h"
1868 fi
1869 tmake_file="$tmake_file sparc/t-sol2-64"
1870 need_64bit_hwint=yes
1871 ;;
1872 esac
1873 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1874 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1875 no:*:*) ;;
1876 *:yes:* ) thread_file=posix ;;
1877 yes:*:* | *:*:yes ) thread_file=solaris ;;
1878 esac
1879 ;;
1880 sparc-*-sysv4*)
1881 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
1882 tmake_file=t-svr4
1883 extra_parts="crtbegin.o crtend.o"
1884 use_fixproto=yes
1885 ;;
1886 sparclite-*-coff*)
1887 tm_file="${tm_file} sparc/lite.h svr3.h sparc/litecoff.h dbxcoff.h libgloss.h"
1888 tmake_file=sparc/t-sparclite
1889 ;;
1890 sparclite-*-elf*)
1891 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/liteelf.h"
1892 tmake_file="sparc/t-sparclite sparc/t-crtfm"
1893 extra_parts="crtbegin.o crtend.o"
1894 use_fixproto=yes
1895 ;;
1896 sparc86x-*-elf*)
1897 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/elf.h sparc/sp86x-elf.h"
1898 tmake_file="sparc/t-sp86x sparc/t-crtfm"
1899 extra_parts="crtbegin.o crtend.o"
1900 use_fixproto=yes
1901 ;;
1902 sparc64-*-aout*)
1903 tm_file="sparc/sparc.h sparc/aout.h sparc/sp64-aout.h"
1904 use_fixproto=yes
1905 ;;
1906 sparc64-*-elf*)
1907 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h sparc/sol2.h sparc/sp64-elf.h"
1908 tmake_file="${tmake_file} sparc/t-crtfm"
1909 extra_parts="crtbegin.o crtend.o"
1910 use_fixproto=yes
1911 ;;
1912 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
1913 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
1914 tmake_file="${tmake_file} sparc/t-crtfm"
1915 case "x$with_cpu" in
1916 xultrasparc) ;;
1917 x) with_cpu=ultrasparc ;;
1918 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
1919 esac
1920 need_64bit_hwint=yes
1921 ;;
1922 sparc64-*-linux*) # 64-bit SPARC's running GNU/Linux
1923 tmake_file="${tmake_file} sparc/t-linux64 sparc/t-crtfm"
1924 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
1925 ;;
1926 sparc64-*-netbsd*)
1927 tmake_file="${tmake_file} sparc/t-netbsd64"
1928 tm_file="sparc/biarch64.h ${tm_file}"
1929 tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
1930 ;;
1931 strongarm-*-elf*)
1932 tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
1933 tmake_file=arm/t-strongarm-elf
1934 out_file=arm/arm.c
1935 md_file=arm/arm.md
1936 extra_modes=arm/arm-modes.def
1937 use_fixproto=yes
1938 ;;
1939 strongarm-*-pe)
1940 tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
1941 tmake_file=arm/t-strongarm-pe
1942 out_file=arm/arm.c
1943 md_file=arm/arm.md
1944 extra_modes=arm/arm-modes.def
1945 extra_objs=pe.o
1946 use_fixproto=yes
1947 ;;
1948 strongarm-*-kaos*)
1949 tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
1950 tmake_file=arm/t-strongarm-elf
1951 out_file=arm/arm.c
1952 md_file=arm/arm.md
1953 extra_modes=arm/arm-modes.def
1954 ;;
1955 v850e1-*-*)
1956 target_cpu_default="TARGET_CPU_v850e1"
1957 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
1958 tm_p_file=v850/v850-protos.h
1959 tmake_file=v850/t-v850e
1960 md_file=v850/v850.md
1961 out_file=v850/v850.c
1962 if test x$stabs = xyes
1963 then
1964 tm_file="${tm_file} dbx.h"
1965 fi
1966 use_collect2=no
1967 c_target_objs="v850-c.o"
1968 cxx_target_objs="v850-c.o"
1969 use_fixproto=yes
1970 ;;
1971 v850e-*-*)
1972 target_cpu_default="TARGET_CPU_v850e"
1973 tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
1974 tm_p_file=v850/v850-protos.h
1975 tmake_file=v850/t-v850e
1976 md_file=v850/v850.md
1977 out_file=v850/v850.c
1978 if test x$stabs = xyes
1979 then
1980 tm_file="${tm_file} dbx.h"
1981 fi
1982 use_collect2=no
1983 c_target_objs="v850-c.o"
1984 cxx_target_objs="v850-c.o"
1985 use_fixproto=yes
1986 ;;
1987 v850-*-*)
1988 target_cpu_default="TARGET_CPU_generic"
1989 tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1990 tmake_file=v850/t-v850
1991 if test x$stabs = xyes
1992 then
1993 tm_file="${tm_file} dbx.h"
1994 fi
1995 use_collect2=no
1996 c_target_objs="v850-c.o"
1997 cxx_target_objs="v850-c.o"
1998 use_fixproto=yes
1999 ;;
2000 vax-*-bsd*) # VAXen running BSD
2001 tm_file="${tm_file} vax/bsd.h"
2002 use_collect2=yes
2003 use_fixproto=yes
2004 ;;
2005 vax-*-sysv*) # VAXen running system V
2006 tm_file="${tm_file} vax/vaxv.h"
2007 use_fixproto=yes
2008 ;;
2009 vax-*-netbsdelf*)
2010 tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2011 ;;
2012 vax-*-netbsd*)
2013 tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2014 tmake_file=t-netbsd
2015 extra_parts=""
2016 use_collect2=yes
2017 ;;
2018 vax-*-openbsd*)
2019 tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2020 use_collect2=yes
2021 ;;
2022 vax-*-ultrix*) # VAXen running ultrix
2023 tm_file="${tm_file} vax/ultrix.h"
2024 use_fixproto=yes
2025 ;;
2026 xscale-*-elf)
2027 tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2028 tmake_file=arm/t-xscale-elf
2029 out_file=arm/arm.c
2030 md_file=arm/arm.md
2031 extra_modes=arm/arm-modes.def
2032 use_fixproto=yes
2033 ;;
2034 xscale-*-coff)
2035 tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2036 tmake_file=arm/t-xscale-coff
2037 out_file=arm/arm.c
2038 md_file=arm/arm.md
2039 extra_modes=arm/arm-modes.def
2040 use_fixproto=yes
2041 ;;
2042 xstormy16-*-elf)
2043 # For historical reasons, the target files omit the 'x'.
2044 tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2045 tm_p_file=stormy16/stormy16-protos.h
2046 md_file=stormy16/stormy16.md
2047 out_file=stormy16/stormy16.c
2048 tmake_file="stormy16/t-stormy16"
2049 extra_parts="crtbegin.o crtend.o"
2050 use_fixproto=yes
2051 ;;
2052 xtensa-*-elf*)
2053 tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2054 tmake_file="xtensa/t-xtensa xtensa/t-elf"
2055 ;;
2056 xtensa-*-linux*)
2057 tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2058 tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2059 ;;
2060 am33_2.0-*-linux*)
2061 tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2062 tmake_file="${tmake_file} mn10300/t-linux"
2063 gas=yes gnu_ld=yes
2064 extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2065 use_collect2=no
2066 ;;
2067 *)
2068 echo "*** Configuration ${target} not supported" 1>&2
2069 exit 1
2070 ;;
2071 esac
2073 # Support for --with-cpu and related options (and a few unrelated options,
2074 # too).
2075 case ${with_cpu} in
2076 yes | no)
2077 echo "--with-cpu must be passed a value" 1>&2
2078 exit 1
2079 ;;
2080 esac
2082 # If there is no $with_cpu option, try to infer one from ${target}.
2083 # This block sets nothing except for with_cpu.
2084 if test x$with_cpu = x ; then
2085 case ${target} in
2086 ep9312-*-*)
2087 # A Cirrus ARM variant.
2088 with_cpu="ep9312"
2089 ;;
2090 i486-*-*)
2091 with_cpu=i486
2092 ;;
2093 i586-*-*)
2094 case ${target_noncanonical} in
2095 k6_2-*)
2096 with_cpu=k6-2
2097 ;;
2098 k6_3-*)
2099 with_cpu=k6-3
2100 ;;
2101 k6-*)
2102 with_cpu=k6
2103 ;;
2104 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2105 with_cpu=pentium-mmx
2106 ;;
2107 *)
2108 with_cpu=pentium
2109 ;;
2110 esac
2111 ;;
2112 i686-*-* | i786-*-*)
2113 case ${target_noncanonical} in
2114 k8-*|opteron-*|athlon_64-*)
2115 with_cpu=k8
2116 ;;
2117 athlon_xp-*|athlon_mp-*|athlon_4-*)
2118 with_cpu=athlon-4
2119 ;;
2120 athlon_tbird-*|athlon-*)
2121 with_cpu=athlon
2122 ;;
2123 pentium2-*)
2124 with_cpu=pentium2
2125 ;;
2126 pentium3-*|pentium3m-*)
2127 with_cpu=pentium3
2128 ;;
2129 pentium4-*|pentium4m-*)
2130 with_cpu=pentium4
2131 ;;
2132 prescott-*)
2133 with_cpu=prescott
2134 ;;
2135 nocona-*)
2136 with_cpu=nocona
2137 ;;
2138 pentium_m-*)
2139 with_cpu=pentium-m
2140 ;;
2141 *)
2142 with_cpu=pentiumpro
2143 ;;
2144 esac
2145 ;;
2146 x86_64-*-*)
2147 with_cpu=k8
2148 ;;
2149 alphaev6[78]*-*-*)
2150 with_cpu=ev67
2151 ;;
2152 alphaev6*-*-*)
2153 with_cpu=ev6
2154 ;;
2155 alphapca56*-*-*)
2156 with_cpu=pca56
2157 ;;
2158 alphaev56*-*-*)
2159 with_cpu=ev56
2160 ;;
2161 alphaev5*-*-*)
2162 with_cpu=ev5
2163 ;;
2164 frv-*-*linux*)
2165 with_cpu=fr400
2166 ;;
2167 sparc*-*-*)
2168 with_cpu="`echo ${target} | sed 's/-.*$//'`"
2169 if [ x$with_cpu = xsparc64 ]; then
2170 with_cpu=v9
2171 fi
2172 ;;
2173 esac
2174 fi
2176 # Similarly for --with-float
2177 if test x$with_float = x; then
2178 case ${target} in
2179 ep9312-*-*)
2180 with_float=hard
2181 ;;
2182 esac
2183 fi
2185 # Similarly for --with-schedule.
2186 if test x$with_schedule = x; then
2187 case ${target} in
2188 hppa1* | parisc1*)
2189 # Override default PA8000 scheduling model.
2190 with_schedule=7100LC
2191 ;;
2192 esac
2193 fi
2195 # Validate and mark as valid any --with options supported
2196 # by this target. In order to use a particular --with option
2197 # you must list it in supported_defaults; validating the value
2198 # is optional. This case statement should set nothing besides
2199 # supported_defaults.
2201 supported_defaults=
2202 case "${target}" in
2203 alpha*-*-*)
2204 supported_defaults="cpu tune"
2205 for which in cpu tune; do
2206 eval "val=\$with_$which"
2207 case "$val" in
2208 "" \
2209 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2210 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2211 | 21264a)
2212 ;;
2213 *)
2214 echo "Unknown CPU used in --with-$which=$val" 1>&2
2215 exit 1
2216 ;;
2217 esac
2218 done
2219 ;;
2221 arm*-*-*)
2222 supported_defaults="arch cpu float tune fpu abi"
2223 for which in cpu tune; do
2224 # See if it matches any of the entries in arm-cores.def
2225 eval "val=\$with_$which"
2226 if [ x"$val" = x ] \
2227 || grep "^ARM_CORE($val," \
2228 ${srcdir}/config/arm/arm-cores.def \
2229 > /dev/null; then
2230 # Ok
2231 true
2232 else
2233 echo "Unknown CPU used in --with-$which=$val" 1>&2
2234 exit 1
2235 fi
2236 done
2238 case "$with_arch" in
2239 "" \
2240 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2241 | armv5te | armv6j | iwmmxt | ep9312)
2242 # OK
2243 ;;
2244 *)
2245 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2246 exit 1
2247 ;;
2248 esac
2250 case "$with_float" in
2251 "" \
2252 | soft | hard | softfp)
2253 # OK
2254 ;;
2255 *)
2256 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2257 exit 1
2258 ;;
2259 esac
2261 case "$with_fpu" in
2262 "" \
2263 | fpa | fpe2 | fpe3 | maverick | vfp )
2264 # OK
2265 ;;
2266 *)
2267 echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2268 exit 1
2269 ;;
2270 esac
2272 case "$with_abi" in
2273 "" \
2274 | apcs-gnu | atpcs | aapcs | iwmmxt )
2275 #OK
2276 ;;
2277 *)
2278 echo "Unknown ABI used in --with-abi=$with_abi"
2279 exit 1
2280 ;;
2281 esac
2283 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2284 echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2285 fi
2286 ;;
2288 fr*-*-*linux*)
2289 supported_defaults=cpu
2290 case "$with_cpu" in
2291 fr400) ;;
2292 *)
2293 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2294 exit 1
2295 ;;
2296 esac
2297 ;;
2299 m68k*-linux*)
2300 supported_defaults="cpu"
2301 case "$with_cpu" in
2302 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2303 # OK
2304 ;;
2305 *)
2306 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
2307 echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2308 exit 1
2309 ;;
2310 esac
2311 ;;
2313 hppa*-*-* | parisc*-*-*)
2314 supported_defaults="arch schedule"
2316 case "$with_arch" in
2317 "" | 1.0 | 1.1 | 2.0)
2318 # OK
2319 ;;
2320 *)
2321 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2322 exit 1
2323 ;;
2324 esac
2326 case "$with_schedule" in
2327 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2328 # OK
2329 ;;
2330 *)
2331 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2332 exit 1
2333 ;;
2334 esac
2335 ;;
2337 i[34567]86-*-* | x86_64-*-*)
2338 supported_defaults="arch cpu tune"
2339 for which in arch cpu tune; do
2340 eval "val=\$with_$which"
2341 case ${val} in
2342 "" | i386 | i486 \
2343 | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2344 | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2345 | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2346 | athlon-4 | athlon-xp | athlon-mp | k8 | opteron \
2347 | athlon64 | athlon-fx | prescott | pentium-m \
2348 | pentium4m | pentium3m| nocona)
2349 # OK
2350 ;;
2351 *)
2352 echo "Unknown CPU given in --with-$which=$val." 1>&2
2353 exit 1
2354 ;;
2355 esac
2356 done
2357 ;;
2359 mips*-*-*)
2360 supported_defaults="abi arch float tune"
2362 case ${with_float} in
2363 "" | soft | hard)
2364 # OK
2365 ;;
2366 *)
2367 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2368 exit 1
2369 ;;
2370 esac
2372 case ${with_abi} in
2373 "" | 32 | o64 | n32 | 64 | eabi)
2374 # OK
2375 ;;
2376 *)
2377 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2378 exit 1
2379 ;;
2380 esac
2381 ;;
2383 powerpc*-*-* | rs6000-*-*)
2384 supported_defaults="cpu float tune"
2386 for which in cpu tune; do
2387 eval "val=\$with_$which"
2388 case ${val} in
2389 default32 | default64)
2390 with_which="with_$which"
2391 eval $with_which=
2392 ;;
2393 "" | common \
2394 | power | power2 | power3 | power4 \
2395 | powerpc | powerpc64 \
2396 | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2397 | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2398 | 601 | 602 | 603 | 603e | ec603e | 604 \
2399 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2400 | 8540 | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2401 # OK
2402 ;;
2403 *)
2404 echo "Unknown cpu used in --with-$which=$val." 1>&2
2405 exit 1
2406 ;;
2407 esac
2408 done
2409 ;;
2411 s390*-*-*)
2412 supported_defaults="arch mode tune"
2414 for which in arch tune; do
2415 eval "val=\$with_$which"
2416 case ${val} in
2417 "" | g5 | g6 | z900 | z990)
2418 # OK
2419 ;;
2420 *)
2421 echo "Unknown cpu used in --with-$which=$val." 1>&2
2422 exit 1
2423 ;;
2424 esac
2425 done
2427 case ${with_mode} in
2428 "" | esa | zarch)
2429 # OK
2430 ;;
2431 *)
2432 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2433 exit 1
2434 ;;
2435 esac
2436 ;;
2438 sparc*-*-*)
2439 supported_defaults="cpu float tune"
2441 for which in cpu tune; do
2442 eval "val=\$with_$which"
2443 case ${val} in
2444 "" | sparc | sparcv9 | sparc64 | sparc86x \
2445 | v7 | cypress | v8 | supersparc | sparclite | f930 \
2446 | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2447 | v9 | ultrasparc | ultrasparc3)
2448 # OK
2449 ;;
2450 *)
2451 echo "Unknown cpu used in --with-$which=$val" 1>&2
2452 exit 1
2453 ;;
2454 esac
2455 done
2457 case ${with_float} in
2458 "" | soft | hard)
2459 # OK
2460 ;;
2461 *)
2462 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2463 exit 1
2464 ;;
2465 esac
2466 ;;
2468 v850*-*-*)
2469 supported_defaults=cpu
2470 case ${with_cpu} in
2471 "" | v850e | v850e1)
2472 # OK
2473 ;;
2474 *)
2475 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2476 exit 1
2477 ;;
2478 esac
2479 ;;
2480 esac
2482 # Set some miscellaneous flags for particular targets.
2483 target_cpu_default2=
2484 case ${target} in
2485 alpha*-*-*)
2486 if test x$gas = xyes
2487 then
2488 target_cpu_default2="MASK_GAS"
2489 fi
2490 ;;
2492 arm*-*-*)
2493 case "x$with_cpu" in
2494 x)
2495 # The most generic
2496 target_cpu_default2="TARGET_CPU_generic"
2497 ;;
2499 *)
2500 target_cpu_default2="TARGET_CPU_$with_cpu"
2501 ;;
2502 esac
2503 ;;
2505 m68k*-linux*)
2506 case "x$with_cpu" in
2507 x)
2508 # The most generic
2509 target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2510 ;;
2511 xm68020)
2512 target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2513 ;;
2514 xm68030)
2515 target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2516 ;;
2517 xm68040)
2518 target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2519 ;;
2520 xm68060)
2521 target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2522 ;;
2523 xm68020-40)
2524 target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2525 ;;
2526 xm68020-60)
2527 target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2528 ;;
2529 *)
2530 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
2531 exit 1
2532 ;;
2533 esac
2534 ;;
2536 hppa*-*-* | parisc*-*-*)
2537 if test x$gas = xyes
2538 then
2539 target_cpu_default2="MASK_GAS|MASK_JUMP_IN_DELAY"
2540 fi
2541 ;;
2543 mips*-*-*)
2544 case ${target} in
2545 mips*-*-ecoff* | mips*-*-elf*)
2546 if test x$gas = xyes
2547 then
2548 if test x$gnu_ld = xyes
2549 then
2550 target_cpu_default2="MASK_GAS|MASK_SPLIT_ADDR"
2551 else
2552 target_cpu_default2="MASK_GAS"
2553 fi
2554 fi
2555 ;;
2556 mips*-*-*)
2557 if test x$gas = xyes
2558 then
2559 target_cpu_default2="MASK_GAS"
2560 fi
2561 ;;
2562 esac
2563 case ${target} in
2564 mips*el-*-*)
2565 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2566 ;;
2567 esac
2568 case $tm_file in
2569 *mips/elf.h* | *mips/elf64.h*)
2570 tm_defines="OBJECT_FORMAT_ELF $tm_defines"
2571 ;;
2572 esac
2573 if test "x$enable_gofast" = xyes
2574 then
2575 tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2576 tmake_file="mips/t-gofast $tmake_file"
2577 else
2578 tmake_file="mips/t-mips $tmake_file"
2579 fi
2580 ;;
2582 powerpc*-*-* | rs6000-*-*)
2583 # FIXME: The PowerPC port uses the value set at compile time,
2584 # although it's only cosmetic.
2585 if test "x$with_cpu" != x
2586 then
2587 target_cpu_default2="\\\"$with_cpu\\\""
2588 fi
2589 out_file=rs6000/rs6000.c
2590 c_target_objs="${c_target_objs} rs6000-c.o"
2591 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
2592 tmake_file="rs6000/t-rs6000 ${tmake_file}"
2593 ;;
2595 sparc*-*-*)
2596 # Some standard aliases.
2597 case x$with_cpu in
2598 xsparc)
2599 with_cpu=v7
2600 ;;
2601 xsparc86x)
2602 with_cpu=sparclite86x
2603 ;;
2604 xsparcv9 | xsparc64)
2605 with_cpu=v9
2606 ;;
2607 esac
2609 # The Sparc port checks this value at compile-time.
2610 target_cpu_default2="TARGET_CPU_$with_cpu"
2611 ;;
2612 v850*-*-*)
2613 # FIXME: The v850 is "special" in that it does not support
2614 # runtime CPU selection, only --with-cpu.
2615 case "x$with_cpu" in
2616 x)
2617 ;;
2618 xv850e)
2619 target_cpu_default2="TARGET_CPU_$with_cpu"
2620 ;;
2621 esac
2622 ;;
2623 esac
2625 t=
2626 all_defaults="abi cpu arch tune schedule float mode fpu"
2627 for option in $all_defaults
2628 do
2629 eval "val=\$with_$option"
2630 if test -n "$val"; then
2631 case " $supported_defaults " in
2632 *" $option "*)
2633 ;;
2634 *)
2635 echo "This target does not support --with-$option." 2>&1
2636 exit 1
2637 ;;
2638 esac
2640 if test "x$t" = x
2641 then
2642 t="{ \"$option\", \"$val\" }"
2643 else
2644 t="${t}, { \"$option\", \"$val\" }"
2645 fi
2646 fi
2647 done
2648 if test "x$t" = x
2649 then
2650 configure_default_options="{ { NULL, NULL} }"
2651 else
2652 configure_default_options="{ ${t} }"
2653 fi
2655 if test "$target_cpu_default2" != ""
2656 then
2657 if test "$target_cpu_default" != ""
2658 then
2659 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
2660 else
2661 target_cpu_default=$target_cpu_default2
2662 fi
2663 fi