1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 CONFIG_LANGUAGES
= @all_languages@
43 LANGUAGES
= c gcov
$(exeext
) $(CONFIG_LANGUAGES
)
45 # Languages should create dependencies of $(INTL_TARGETS) on generated
46 # sources in Make-lang.in. Example:
47 # $(INTL_TARGETS): $(srcdir)/cp/parse.c
48 INTL_TARGETS
= intl.
all intl.
install intl.distdir
50 # Selection of languages to be made during stage1 build.
51 # This is overridden by configure.
52 BOOT_LANGUAGES
= c @all_boot_languages@
58 # Various ways of specifying flags for compilations:
59 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
60 # BOOT_CFLAGS is the value of CFLAGS to pass
61 # to the stage2 and stage3 compilations
62 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
63 # (And for stage 1 if the native compiler is GCC.) It is
64 # separate from BOOT_CFLAGS because people tend to override optimization
65 # flags and we'd like them to still have warnings turned on. They are free
66 # to explicitly turn warnings off if they wish.
67 # XCFLAGS is used for most compilations but not when using the GCC just built.
68 # TCFLAGS is used for compilations with the GCC just built.
71 CFLAGS
= -g @stage1_warn_cflags@
72 BOOT_CFLAGS
= -O2
$(CFLAGS
)
73 WARN_CFLAGS
= -W
-Wall
74 # These exists to be overridden by the x-* and t-* files, respectively.
83 # srcdir might be a relative pathname which won't be valid in a subdirectory,
84 # so we must use objdir/srcdir instead to make it safe. objdir is always
86 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
87 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
88 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
89 esac; else echo bison ; fi`
91 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
98 # on sysV, define this as cp.
100 # Some systems may be missing symbolic links, regular links, or both.
101 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
104 # These permit overriding just for certain files.
105 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
106 INSTALL_DATA
= @INSTALL_DATA@
107 MAKEINFO
= `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
108 then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
109 else echo makeinfo ; fi`
112 # For GNUmake: let us decide what gets passed to recursive makes.
116 # Define this as & to perform parallel make on a Sequent.
117 # Note that this has some bugs, and it seems currently necessary
118 # to compile all the gen* files first by hand to avoid erroneous results.
121 # How to invoke ranlib.
123 # Test to use to see whether ranlib exists on the system.
126 ||
[ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
]
128 # Compiler to use for compiling libgcc1.a.
129 # OLDCC should not be the GNU C compiler,
130 # since that would compile typical libgcc1.a functions such as mulsi3
131 # into infinite recursions.
134 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
135 # NOTE: -O does not work on some Unix systems!
138 # Version of ar to use when compiling libgcc1.a.
142 # Target to use when installing include directory. Either
143 # install-headers-tar or install-headers-cpio.
144 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
146 # Header files that are made available under the same name
147 # to programs compiled with GCC.
148 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
149 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/proto.h \
150 $(srcdir)/ginclude
/stdbool.h
$(srcdir)/ginclude
/iso646.h \
151 $(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
)
153 # Target to use whe installing assert.h. Some systems may
154 # want to set this empty.
155 INSTALL_ASSERT_H
= install-assert-h
157 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
158 # Usually the one we just built.
159 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
160 GCC_FOR_TARGET
= .
/xgcc
-B
$(build_tooldir
)/bin
/ -B.
/ -I
$(build_tooldir
)/include
162 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
163 # It omits XCFLAGS, and specifies -B./.
164 # It also specifies -I./include to find, e.g., stddef.h.
165 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
167 # Sed command to transform gcc to installed name. Overwritten by configure.
168 program_transform_name
= @program_transform_name@
169 program_transform_cross_name
= s
,^
,$(target_alias
)-,
171 build_canonical
= @build_canonical@
172 host_canonical
= @host_canonical@
174 # Tools to use when building a cross-compiler.
175 # These are used because `configure' appends `cross-make'
176 # to the makefile when making a cross-compiler.
178 # Use the tools from the build tree, if they are available.
180 # objdir is set by configure.
184 if [ -f $(objdir)/../binutils/ar ] ; then \
185 echo $(objdir)/../binutils/ar ; \
187 if [ "$(host_canonical)" = "$(target)" ] ; then \
190 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
193 AR_FLAGS_FOR_TARGET
= rc
194 RANLIB_FOR_TARGET
= ` \
195 if [ -f $(objdir)/../binutils/ranlib ] ; then \
196 echo $(objdir)/../binutils/ranlib ; \
198 if [ "$(host_canonical)" = "$(target)" ] ; then \
201 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
204 RANLIB_TEST_FOR_TARGET
= \
205 [ -f
$(RANLIB_FOR_TARGET
) ] \
206 ||
( [ "$(host_canonical)" = "$(target)" ] \
207 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
209 # Dir to search for system headers. Overridden by cross-make.
210 SYSTEM_HEADER_DIR
= /usr
/include
212 # Control whether to run fixproto.
213 STMP_FIXPROTO
= stmp-fixproto
215 # Test to see whether <limits.h> exists in the system header files.
216 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
219 target_alias
=@target_alias@
220 xmake_file
=@dep_host_xmake_file@
221 tmake_file
=@dep_tmake_file@
222 out_file
=$(srcdir)/config
/@out_file@
223 out_object_file
=@out_object_file@
224 md_file
=$(srcdir)/config
/@md_file@
225 tm_file
=@tm_file_list@
226 build_xm_file
=@build_xm_file_list@
227 host_xm_file
=@host_xm_file_list@
228 lang_specs_files
=@lang_specs_files@
229 lang_options_files
=@lang_options_files@
230 lang_tree_files
=@lang_tree_files@
231 GCC_THREAD_FILE
=@thread_file@
232 OBJC_BOEHM_GC
=@objc_boehm_gc@
233 GTHREAD_FLAGS
=@gthread_flags@
234 # Be prepared for gcc2 merges.
235 gcc_version
=@gcc_version@
236 gcc_version_trigger
=@gcc_version_trigger@
237 version
=$(gcc_version
)
238 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
240 # Common prefix for installation directories.
241 # NOTE: This directory must exist when you start installation.
243 # Directory in which to put localized header files. On the systems with
244 # gcc as the native cc, `local_prefix' may not be `prefix' which is
246 # NOTE: local_prefix *should not* default from prefix.
247 local_prefix
= @local_prefix@
248 # Directory in which to put host dependent programs and libraries
249 exec_prefix = @
exec_prefix@
250 # Directory in which to put the executable for the command `gcc'
252 # Directory in which to put the directories used by the compiler.
254 # Directory in which the compiler finds executables, libraries, etc.
255 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
256 # Used to produce a relative $(gcc_tooldir) in gcc.o
257 unlibsubdir
= ..
/..
/..
258 # Directory in which to find other cross-compilation tools and headers.
260 # Used in install-cross.
261 gcc_tooldir
= @gcc_tooldir@
262 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
263 build_tooldir
= $(exec_prefix)/$(target_alias
)
264 # Directory in which the compiler finds g++ includes.
265 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
266 # Directory to search for site-specific includes.
267 includedir = $(local_prefix
)/include
268 # assertdir is overridden in cross-make.
269 # (But this currently agrees with what is in cross-make.)
270 assertdir
= $(gcc_tooldir
)/include
271 # where the info files go
273 # Where cpp should go besides $prefix/bin if necessary
274 cpp_install_dir
= @cpp_install_dir@
275 # where the locale files go
276 datadir = $(prefix)/@DATADIRNAME@
277 localedir
= $(datadir)/locale
278 # Extension (if any) to put in installed man-page filename.
281 exeext
= @host_exeext@
282 build_exeext
= @build_exeext@
284 # Directory in which to put man pages.
286 man1dir = $(mandir)/man1
287 # Dir for temp files.
290 # Top build directory, relative to here.
293 # Whether we were configured with NLS.
296 # Internationalization library.
297 INTLLIBS
= @INTLLIBS@
299 # List of internationalization subdirectories.
301 INTL_SUBDIRS
= intl
$(POSUB
)
303 # Additional system libraries to link with.
306 # Change this to a null string if obstacks are installed in the
310 # The GC method to be used on this system.
313 # If a supplementary library is being used for the GC.
316 # Configure will set these if you need vfprintf and possibly _doprnt support.
320 # Specify the rule for actually making libgcc.a,
322 # and the rule for installing it.
323 INSTALL_LIBGCC
= install-libgcc
325 # Specify the rule for actually making libgcc1.a.
326 # The value may be empty; that means to do absolutely nothing
327 # with or for libgcc1.a.
330 # Specify the rule for making libgcc1.a for a cross-compiler.
331 # The default rule assumes that libgcc1.a is supplied by the user.
332 CROSS_LIBGCC1
= libgcc1.cross
334 # Specify the rule for actually making libgcc2.a.
337 # Options to use when compiling libgcc2.a.
338 # -g1 causes output of debug info only for file-scope entities.
339 # we use this here because that should be enough, and also
340 # so that -g1 will be tested.
342 LIBGCC2_DEBUG_CFLAGS
= -g1
343 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
345 # Additional options to use when compiling libgcc2.a.
346 # Some targets override this to -Iinclude
349 # Additional target-dependent options for compiling libgcc2.a.
350 TARGET_LIBGCC2_CFLAGS
=
352 # Things which must be built before building libgcc2.a.
353 # Some targets override this to stmp-int-hdrs
356 # libgcc1-test target (must also be overridable for a target)
357 LIBGCC1_TEST
= libgcc1-test
359 # List of extra executables that should be compiled for this target machine
360 # that are used for compiling from source code to object code.
361 # The rules for compiling them should be in the t-* file for the machine.
362 EXTRA_PASSES
=@extra_passes@
364 # Like EXTRA_PASSES, but these are used when linking.
365 EXTRA_PROGRAMS
= @extra_programs@
367 # List of extra object files that should be compiled for this target machine.
368 # The rules for compiling them should be in the t-* file for the machine.
369 EXTRA_PARTS
= @extra_parts@
371 # List of extra object files that should be compiled and linked with
372 # compiler proper (cc1, cc1obj, cc1plus).
373 EXTRA_OBJS
= @extra_objs@
375 # List of extra object files that should be compiled and linked with
377 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
379 # List of additional header files to install.
380 # Often this is edited directly by `configure'.
381 EXTRA_HEADERS
=@extra_headers_list@
383 # Set this to `collect2' to enable use of collect2.
384 USE_COLLECT2
= @will_use_collect2@
385 # If we might be using collect2, then this variable will be set to
386 # -DUSE_COLLECT2. toplev.c, collect2.c and libgcc2.c all need to
387 # if we may be using collect2.
388 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
389 # It is convenient for configure to add the assignment at the beginning,
390 # so don't override it here.
391 USE_COLLECT2
= collect2
$(exeext
)
393 # List of extra C and assembler files to add to libgcc1.a.
394 # Assembler files should have names ending in `.asm'.
397 # List of extra C and assembler files to add to libgcc2.a.
398 # Assembler files should have names ending in `.asm'.
401 # Handle cpp installation.
405 # We do not try to build float.h anymore. Let configure select the
406 # appropriate pre-built float.h file for the target.
407 FLOAT_H
=@float_h_file@
409 # Program to convert libraries.
412 # Control whether header files are installed.
413 INSTALL_HEADERS
=install-headers
415 # Additional directories of header files to run fixincludes on.
416 # These should be directories searched automatically by default
417 # just as /usr/include is.
418 # *Do not* use this for directories that happen to contain
419 # header files, but are not searched automatically by default.
420 # On most systems, this is empty.
421 OTHER_FIXINCLUDES_DIRS
=
423 # A list of all the language-specific executables.
424 # This is overridden by configure.
425 COMPILERS
= cc1
$(exeext
) @all_compilers@
427 # List of things which should already be built whenever we try to use xgcc
428 # to compile anything (without linking).
429 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
431 # List of things which should already be built whenever we try to use xgcc
433 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
435 # Directory to link to, when using the target `maketest'.
438 # Guaranteed to not exist when not passing md through cpp.
439 # This value is overridden directly by configure.
440 MD_FILE
= md-cpp-not-used
442 # Flags to use when cross-building GCC.
443 # Prefix to apply to names of object files when using them
444 # to run on the machine we are compiling on.
446 # Prefix to apply to names of object files when compiling them
447 # to run on the machine we are compiling on.
448 # The default for this variable is chosen to keep these rules
449 # out of the way of the other rules for compiling the same source files.
452 HOST_CFLAGS
=$(ALL_CFLAGS
)
454 HOST_INTLLIBS
=$(INTLLIBS
)
455 HOST_LDFLAGS
=$(LDFLAGS
)
456 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
457 HOST_ALLOCA
=$(ALLOCA
)
458 HOST_MALLOC
=$(MALLOC
)
459 HOST_OBSTACK
=$(OBSTACK
)
460 HOST_VFPRINTF
=$(VFPRINTF
)
461 HOST_DOPRINT
=$(DOPRINT
)
463 # Actual name to use when installing a native compiler.
464 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
465 CPP_INSTALL_NAME
= `t='$(program_transform_name)'; echo cpp | sed -e $$t`
466 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
467 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
468 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
470 # Actual name to use when installing a cross-compiler.
471 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
472 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
473 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
475 # Choose the real default target.
478 # Choose the real install target.
479 INSTALL_TARGET
=install-normal
481 # Setup the testing framework, if you have one
482 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
483 echo $${rootme}/../expect/expect ; \
484 else echo expect ; fi`
486 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
487 echo $${srcdir}/../dejagnu/runtest ; \
488 else echo runtest; fi`
491 # Extra symbols for fixproto to define when parsing headers.
494 # Extra flags to use when compiling crt{begin,end}.o.
497 # Extra flags to use when compiling [m]crt0.o.
500 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
503 # End of variables for you to override.
505 # Definition of `all' is here so that new rules inserted by sed
506 # do not specify the default target.
507 # The real definition is under `all.internal' (for native compilers)
508 # or `all.cross' (for cross compilers).
511 # This tells GNU Make version 3 not to put all variables in the environment.
514 # sed inserts variable overrides after the following line.
528 # Now figure out from those variables how to compile and link.
532 # IN_GCC tells various files that system.h, toplev.c, etc are available.
533 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC @extra_c_flags@
535 # This is the variable actually used when we compile.
536 # If you change this line, you probably also need to change the definition
537 # of HOST_CFLAGS in build-make to match.
538 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
542 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
544 # Even if ALLOCA is set, don't use it if compiling with GCC.
545 USE_ALLOCA
= ${ALLOCA}
546 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
547 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
548 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
549 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
550 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
552 # Dependency on obstack, alloca, malloc or whatever library facilities
553 # are not installed in the system libraries.
554 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
555 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
557 # Likewise, for use in the tools that must run on this machine
558 # even if we are cross-building GCC.
559 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
560 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
562 # How to link with both our special library facilities
563 # and the system's installed libraries.
564 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
566 # Likewise, for use in the tools that must run on this machine
567 # even if we are cross-building GCC.
568 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
569 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
572 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
$(HOST_PREFIX
)ggc-none.o
573 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
574 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
575 HOST_ERRORS
= $(HOST_PREFIX
)errors.o
577 # Specify the directories to be searched for header files.
578 # Both . and srcdir are used, in that order,
579 # so that tm.h and config.h will be found in the compilation
580 # subdirectory rather than in the source directory.
581 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
583 # Always use -I$(srcdir)/config when compiling.
585 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
587 # This tells GNU make version 3 not to export all the variables
588 # defined in this file into the environment.
591 # Support for additional languages (other than c and objc).
592 # ??? objc can be supported this way too (leave for later).
594 # These next lines are overridden by configure.
595 LANG_MAKEFILES
= @all_lang_makefiles@
596 LANG_STAGESTUFF
= @all_stagestuff@
597 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
598 LANG_LIB2FUNCS
= @all_lib2funcs@
599 LANG_EXTRA_HEADERS
= @all_headers@
601 # Flags to pass to recursive makes.
602 # CC is set by configure. Hosts without symlinks need special handling
603 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
605 # ??? The choices here will need some experimenting with.
606 ORDINARY_FLAGS_TO_PASS
= \
607 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
608 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
610 "BISONFLAGS=$(BISONFLAGS)" \
613 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
614 "LDFLAGS=$(LDFLAGS)" \
616 "LEXFLAGS=$(LEXFLAGS)" \
619 "MAKEINFO=$(MAKEINFO)" \
620 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
621 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
622 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
624 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
626 "build_exeext=$(build_exeext)" \
628 "exec_prefix=$(exec_prefix)" \
630 "local_prefix=$(local_prefix)" \
631 "gxx_include_dir=$(gcc_gxx_include_dir)" \
632 "tooldir=$(tooldir)" \
633 "gcc_tooldir=$(gcc_tooldir)" \
635 "libsubdir=$(libsubdir)" \
636 "datadir=$(datadir)" \
637 "distdir=../tmp/\$$(subdir)" \
638 "localedir=$(localedir)"
639 FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) "CC=@cc_set_by_configure@"
640 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
641 -e
's|^ *[^ /][^ /]*/|%&|' \
643 -e
's|% *[^- /]|%&|g' \
646 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
647 "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
649 # Lists of files for various purposes.
651 # Language-specific object files for C and Objective C.
652 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
653 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
655 # Language-specific object files for C.
656 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
658 # Language-independent object files.
659 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
660 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o real.o \
661 builtins.o intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o \
662 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
663 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
664 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
665 insn-peep.o reorg.o haifa-sched.o final.o recog.o reg-stack.o \
666 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
667 profile.o insn-attrtab.o
$(out_object_file
) $(EXTRA_OBJS
) convert.o \
668 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o hash.o \
669 lists.o ggc-common.o
$(GGC
)
671 # GEN files are listed separately, so they can be built before doing parallel
672 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
673 # them before rtl.o is compiled.
674 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
675 genpeep gengenrtl gencheck
679 # Files to be copied away after each stage in building.
680 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
681 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
682 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
683 s-flags s-config s-codes s-mlib s-unders s-genrtl \
684 s-output s-recog s-emit s-extract s-peep s-check \
685 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
686 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
687 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
688 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
689 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
690 gencheck
$(build_exeext
) \
691 xgcc
$(exeext
) xcpp
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
692 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
693 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
694 protoize
$(exeext
) unprotoize
$(exeext
) \
695 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
697 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
698 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse
*.flow2
*.peephole2 \
702 # Members of libgcc1.a.
703 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
704 _lshrsi3 _ashrsi3 _ashlsi3 \
705 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
706 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
707 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
708 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
709 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
711 # Library members defined in libgcc2.c.
712 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
713 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
714 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
715 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
716 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
717 _fixtfdi _fixunstfdi _floatditf \
718 __gcc_bcmp _varargs __dummy _eprintf \
719 _bb _shtab _clear_cache _trampoline __main _exit \
724 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
725 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
726 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
729 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
730 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
731 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
734 # The files that "belong" in CONFIG_H are deliberately omitted
735 # because having them there would not be useful in actual practice.
736 # All they would do is cause complete recompilation every time
737 # one of the machine description files is edited.
738 # That may or may not be what one wants to do.
739 # If it is, rm *.o is an easy way to do it.
740 # CONFIG_H = $(host_xm_file) $(tm_file)
742 MACHMODE_H
= machmode.h machmode.def
743 RTL_BASE_H
= rtl.h rtl.def
$(MACHMODE_H
)
744 RTL_H
= $(RTL_BASE_H
) genrtl.h
745 TREE_H
= tree.h real.h tree.def
$(MACHMODE_H
) tree-check.h
746 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h
747 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
749 EXPR_H
= expr.h insn-codes.h
750 REGS_H
= regs.h varray.h
$(MACHMODE_H
)
752 # Language makefile fragments.
754 # The following targets define the interface between us and the languages.
756 # all.build, all.cross, start.encap, rest.encap,
758 # install-normal, install-common, install-info, install-man,
759 # uninstall, distdir,
760 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
761 # stage1, stage2, stage3, stage4
763 # Each language is linked in with a series of hooks (since we can't use `::'
764 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
765 # Configure computes and adds these here.
770 # sed inserts language fragments after the following line.
771 ####language fragments
774 # End of language makefile fragments.
776 # The only suffixes we want for implicit rules are .c and .o, so clear
777 # the list and add them. This speeds up GNU Make, and allows -r to work.
781 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
782 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
783 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
784 "$(xmake_file)" "$(tmake_file)"
785 cp config.status config.run
786 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
789 $(srcdir)/configure
: $(srcdir)/configure.in
790 cd
$(srcdir); autoconf
792 # cstamp-h.in controls rebuilding of config.in.
793 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
794 # delete it. A stamp file is needed as autoheader won't update the file if
795 # nothing has changed.
796 # It remains in the source directory and is part of the distribution.
797 # This follows what is done in shellutils, fileutils, etc.
798 # "echo timestamp" is used instead of touch to be consistent with other
799 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
800 # ??? Newer versions have a maintainer mode that may be useful here.
801 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
802 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
803 cd
$(srcdir) && autoheader
804 @
rm -f
$(srcdir)/cstamp-h.in
805 echo timestamp
> $(srcdir)/cstamp-h.in
806 auto-host.h
: cstamp-h
; @true
807 cstamp-h
: config.in config.status
808 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
810 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
811 # a target to build even if it is up-to-date. So we must verify that
812 # config.status does not exist before failing.
813 config.status
: $(srcdir)/configure version.c
814 @if
[ ! -f config.status
] ; then \
815 echo You must configure gcc. Look at the INSTALL file for details.
; \
818 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
821 all.internal
: start.encap rest.encap doc
822 # This is what to compile if making a cross-compiler.
823 # Note that we can compile enquire using the cross-compiler just built,
824 # although we can't run it on this machine.
825 all.cross
: native gcc-cross xcpp
$(exeext
) specs stmp-headers
$(STMP_FIXPROTO
) \
826 $(LIBGCC
) $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross doc
827 # This is what to compile if making gcc with a cross-compiler.
828 all.build
: native xgcc
$(exeext
) xcpp
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
829 # This is what must be made before installing GCC and converting libraries.
830 start.encap
: native xgcc
$(exeext
) xcpp
$(exeext
) specs
$(LIBGCC1
) \
831 xlimits.h lang.start.encap
832 # These can't be made until after GCC can run.
833 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
834 # This is what is made with the host's compiler
835 # whether making a cross compiler or not.
836 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
837 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
839 # Define the names for selecting languages in LANGUAGES.
843 # Tell GNU make these are phony targets.
844 .PHONY
: C c PROTO proto
846 # On the target machine, finish building a cross compiler.
847 # This does the things that can't be done on the host machine.
848 rest.cross
: $(LIBGCC
) specs
850 # Verify that it works to compile and link libgcc1-test.
851 # If it does, then there are sufficient replacements for libgcc1.a.
852 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
853 @echo
"Testing libgcc1. Ignore linker warning messages."
854 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
855 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
856 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
857 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
859 # Recompile all the language-independent object files.
860 # This is used only if the user explicitly asks for it.
861 compilations
: ${OBJS}
863 # Create a list of the language-independent object files so the language
864 # subdirectories needn't mention their names explicitly.
865 stamp-objlist
: $(OBJS
)
866 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
868 # We call this executable `xgcc' rather than `gcc'
869 # to avoid confusion if the current directory is in the path
870 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
871 xgcc
$(exeext
): gcc.o gccspec.o version.o intl.o
prefix.o \
872 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
873 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o gccspec.o intl.o \
874 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
876 # We call this executable `xcpp' rather than `cpp'
877 # since the real preprocessor is named `cpp'. It too is renamed
878 # when it is installed.
879 # The only difference from xgcc is that it's linked with cppspec.o
880 # instead of gccspec.o.
881 xcpp
$(exeext
): gcc.o cppspec.o version.o intl.o
prefix.o \
882 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
883 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o cppspec.o intl.o \
884 prefix.o version.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
886 # Dump a specs file to make -B./ read these specs over installed ones.
888 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
891 # We do want to create an executable named `xgcc', so we can use it to
893 # Also create gcc-cross, so that install-common will install properly.
894 gcc-cross
: xgcc
$(exeext
)
895 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
897 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
898 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
900 # Build the version of limits.h that we will install.
901 xlimits.h
: glimits.h limitx.h limity.h
902 if
$(LIMITS_H_TEST
) ; then \
903 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
905 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
907 mv tmp-xlimits.h xlimits.h
910 # This is done in two parts because some functions, in libgcc1.c,
911 # must be compiled with something other than GCC,
912 # while the rest, in libgcc2.c, must be compiled with xgcc.
913 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
915 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
916 # LIBCONVERT should put its output in libgcc1.conv.
917 libgcc1.conv
: libgcc1.a
918 $(LIBCONVERT
) libgcc1.a libgcc1.conv
920 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
921 # Make an empty file instead.
922 libgcc1.null
: $(GCC_PASSES
)
923 echo
"void __foo () {}" > dummy.c
924 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
925 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
926 rm -f dummy
$(objext
) dummy.c
928 # This is $(LIBGCC1) for a cross-compiler.
929 # We have no automatic way of building libgcc1.a,
930 # so it's up to the installer to find a way to do that.
931 # This rule deliberately does not depend on libgcc1.a
932 # so that it will fail if the installer hasn't provided it.
934 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
936 # Compile the library of arithmetic subroutines with the native compiler.
937 # Don't compile it with GCC!
938 # (That would cause most arithmetic functions to call themselves.)
940 # NOTE: If you modify these rules substantially, please be sure to
941 # check at least config/i386/t-sco5 and possibly other makefile
943 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
945 # Actually build it in tmplibgcc1.a, then rename at end,
946 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
947 # -e causes any failing command to make this rule fail.
948 # -e doesn't work in certain shells, so we test $$? as well.
949 # lynx has a broken ar, it always complains when the initial library is
950 # empty, thus this command works only if we don't do -e
951 # There is a trailing backslash (\) deleted from the following line.
953 for name in
$(LIB1FUNCS
); \
956 rm -f
$${name}$(objext
); \
957 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
958 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
959 mv libgcc1
$(objext
) $${name}$(objext
); \
960 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
961 rm -f
$${name}$(objext
); \
963 # Some shells crash when a loop has no items.
964 # So make sure there is always at least one--`..'.
966 # We don't use -e here because there are if statements
967 # that should not make the command give up when the if condition is false.
968 # Instead, we test for failure after each command where it matters.
969 for file in ..
$(LIB1FUNCS_EXTRA
); \
971 if
[ x
$${file} != x..
]; then \
972 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
974 if
[ $${name}.asm
= $${file} ]; then \
975 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
977 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
978 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
979 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
980 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
981 rm -f
$${name}.s
$${name}$(objext
); \
985 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
986 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
988 mv tmplibgcc1.a libgcc1.a
990 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
991 # functions. LIB1ASMSRC is the name of the source file in the config
993 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
994 -rm -f tmplibgcc1.a libgcc1.S
995 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
996 # Actually build it in tmplibgcc1.a, then rename at end,
997 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
998 # -e causes any failing command to make this rule fail.
999 # -e doesn't work in certain shells, so we test $$? as well.
1000 # lynx has a broken ar, it always complains when the initial library is
1001 # empty, thus this command works only if we don't do -e
1002 # There is a trailing backslash (\) deleted from the following line.
1004 for name in
$(LIB1ASMFUNCS
); \
1007 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1008 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1009 mv libgcc1
$(objext
) $${name}$(objext
); \
1010 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1011 rm -f
$${name}$(objext
); \
1014 mv tmplibgcc1.a libgcc1-asm.a
1016 # Generate assembly versions of the functions required for libgcc1.
1017 # You'll still need to massage the code by hand (possibly hacking
1018 # underscores and local labels) but this will get you started.
1019 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1022 for name in
$(LIB1FUNCS
); \
1025 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1026 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1027 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1028 cat libgcc1.s
>> libgcc1.S
; \
1029 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1030 echo
"" >> libgcc1.S
; \
1033 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1034 # But recompiling cc1 should not force recompilation of libgcc2.a.
1035 # If you want to force recompilation, delete libgcc2.a.
1036 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1037 -if
[ -f libgcc2.ready
] ; then \
1040 touch libgcc2.ready
; \
1043 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1044 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1045 $(MACHMODE_H
) longlong.h frame.h gbl-ctors.h config.status
1046 # Actually build it in tmplibgcc2.a, then rename at end,
1047 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1049 # -e causes any failing command to make this rule fail.
1050 # -e doesn't work in certain shells, so we test $$? as well.
1051 # lynx has a broken ar, it always complains when the initial library is
1052 # empty, thus this command works only if we don't do -e
1053 # There is a trailing backslash (\) deleted from the following line.
1055 for name in
$(LIB2FUNCS
); \
1058 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1059 $(MAYBE_USE_COLLECT2
) $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1060 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1061 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1062 rm -f
$${name}$(objext
); \
1064 for name in
$(LIB2FUNCS_EH
); \
1067 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1068 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1069 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1070 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1071 rm -f
$${name}$(objext
); \
1073 if
[ x
$(FPBIT
) != x
]; then \
1074 for name in
$(FPBIT_FUNCS
); \
1077 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1078 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1079 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1080 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1081 rm -f
$${name}$(objext
); \
1084 if
[ x
$(DPBIT
) != x
]; then \
1085 for name in
$(DPBIT_FUNCS
); \
1088 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1089 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1090 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1091 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1092 rm -f
$${name}$(objext
); \
1095 # Some shells crash when a loop has no items.
1096 # So make sure there is always at least one--`..'.
1098 # We don't use -e here because there are if statements
1099 # that should not make the command give up when the if condition is false.
1100 # Instead, we test for failure after each command where it matters.
1101 for file in
$(LIB2ADD
); do \
1102 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1103 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1104 if
[ $${name}.txt
= $${file} ]; then \
1105 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1106 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1107 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1108 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1109 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1110 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1111 LANGUAGES
="$(LANGUAGES)" \
1112 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1113 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1114 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1120 if
[ $${name}.asm
= $${file} ]; then \
1121 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1123 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1124 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1125 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1126 rm -f
$${name}.s
$${oname}$(objext
); \
1129 mv tmplibgcc2.a libgcc2.a
1130 # These lines were deleted from above the mv command
1131 # because ranlibing libgcc.a itself should suffice.
1132 # -if [ x${HPUX_GAS} = x ] ; then \
1133 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1134 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1138 # Combine the various libraries into a single library, libgcc.a.
1139 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1140 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1142 -if
[ x
$(LIBGCC1
) != x
]; \
1143 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1146 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1147 # unwritable table of contents file, and then print an error message when
1148 # the second ar command tries to overwrite this file. To avoid the error
1149 # message from ar, we make sure all files are writable.
1150 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1151 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1152 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1154 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1155 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1157 # Actually build it in tmplibgcc.a, then rename at end,
1158 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1159 mv tmplibgcc.a libgcc.a
1161 # Use the genmultilib shell script to generate the information the gcc
1162 # driver program needs to select the library directory based on the
1164 multilib.h
: s-mlib
; @true
1165 s-mlib
: $(srcdir)/genmultilib Makefile
1166 $(SHELL
) $(srcdir)/genmultilib \
1167 "$(MULTILIB_OPTIONS)" \
1168 "$(MULTILIB_DIRNAMES)" \
1169 "$(MULTILIB_MATCHES)" \
1170 "$(MULTILIB_EXCEPTIONS)" \
1171 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1172 $(SHELL
) $(srcdir)/move-if-change tmp-mlib.h multilib.h
1175 # Build multiple copies of libgcc.a, one for each target switch.
1176 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1178 $(LIB2ADD
) $(MACHMODE_H
) longlong.h gbl-ctors.h config.status
1179 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1180 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1181 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1182 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1183 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1184 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1185 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1186 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1187 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1188 LANGUAGES
="$(LANGUAGES)" \
1189 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1190 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1191 MULTILIB_CFLAGS
="$${flags}" \
1192 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1193 dir="$${dir}" stmp-multilib-sub
; \
1194 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1198 # Subroutine of stmp-multilib so make -n works.
1201 if
[ -d
$(dir) ]; then \
1203 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1206 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1207 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1208 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1209 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1210 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1211 LANGUAGES
="$(LANGUAGES)" \
1212 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1213 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1215 else rm -f
$(LIBGCC1
); \
1217 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1220 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1221 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1222 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1223 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1224 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1225 LANGUAGES
="$(LANGUAGES)" \
1226 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1228 rm -rf tmplibgcc.a tmpcopy
1230 if
[ x
$(LIBGCC1
) != x
]; \
1231 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1234 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1235 # unwritable table of contents file, and then print an error message when
1236 # the second ar command tries to overwrite this file. To avoid the error
1237 # message from ar, we make sure all files are writable.
1238 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1239 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1240 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1241 rm -rf libgcc2.a tmpcopy
1242 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1243 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1245 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1246 mv tmplibgcc.a
$(dir)/libgcc.a
1247 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1248 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1249 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1250 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1251 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1252 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1253 LANGUAGES
="$(LANGUAGES)" \
1254 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1255 mv t
$${f} $(dir)/$${f}; \
1259 # Compile two additional files that are linked with every program
1260 # linked using GCC on systems using COFF or ELF, for the sake of C++
1262 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1263 defaults.h frame.h gbl-ctors.h
1264 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1265 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1266 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1268 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1269 defaults.h frame.h gbl-ctors.h
1270 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1271 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1272 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1274 # On some systems we also want to install versions of these files
1275 # compiled using PIC for use in shared libraries.
1276 crtbeginS.o crtendS.o
: s-crtS
; @true
1278 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1279 defaults.h frame.h gbl-ctors.h
1280 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1281 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1282 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1283 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1284 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1285 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1286 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1289 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1290 crt0.o
: s-crt0
; @true
1291 mcrt0.o
: s-crt0
; @true
1293 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1294 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1295 -o crt0.o
-c
$(CRT0_S
)
1296 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1297 -o mcrt0.o
-c
$(MCRT0_S
)
1300 # Compiling object files from source files.
1302 # Note that dependencies on obstack.h are not written
1303 # because that file is not part of GCC.
1305 # C language specific files.
1307 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h ggc.h \
1308 $(srcdir)/c-parse.h c-tree.h c-common.h input.h flags.h system.h toplev.h
1309 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1310 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1311 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1312 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d
-o c-parse.c c-parse.y
1313 $(srcdir)/c-parse.y
: c-parse.in
1314 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1315 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1316 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1317 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1318 $(SHELL
) $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1320 $(srcdir)/c-gperf.h
: c-parse.gperf
1321 gperf
-L C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1322 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h ||
( \
1323 echo
"Please update your 'gperf' from the GCC infrastructure" >&2 ; \
1324 echo
" ftp://sourceware.cygnus.com/pub/egcs/infrastructure/gperf*" >&2 ; \
1326 $(SHELL
) $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1328 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h ggc.h \
1329 c-lex.h flags.h function.h output.h toplev.h defaults.h
1330 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h \
1331 flags.h intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1332 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-common.h ggc.h \
1333 c-lex.h toplev.h output.h function.h
1334 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1335 c-common.h
$(srcdir)/c-parse.h
$(srcdir)/c-gperf.h c-pragma.h input.h \
1336 intl.h flags.h toplev.h output.h mbchar.h ggc.h
1337 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h \
1338 c-common.h flags.h toplev.h
1339 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1340 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) function.h \
1341 defaults.h c-pragma.h toplev.h ggc.h
1342 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1343 c-common.h flags.h toplev.h
$(EXPR_H
)
1344 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1345 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1346 function.h hard-reg-set.h
$(BASIC_BLOCK_H
) graph.h
1347 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1349 COLLECT2_OBJS
= collect2.o tlink.o hash.o intl.o underscore.o version.o
1350 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
1351 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1352 -rm -f collect2
$(exeext
)
1353 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1355 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1356 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h
1357 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1358 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1359 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1361 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h collect2.h
1362 hash.o
: hash.c hash.h system.h toplev.h
1364 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1366 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1367 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1369 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1370 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1372 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1373 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1375 underscore.c
: s-under
; @true
1377 s-under
: $(GCC_PASSES
)
1378 echo
"int xxy_us_dummy;" >tmp-dum.c
1379 $(GCC_FOR_TARGET
) -S tmp-dum.c
1380 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1381 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1382 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1384 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1386 $(SHELL
) $(srcdir)/move-if-change tmp-under.c underscore.c
1387 -rm -f tmp-dum.c tmp-dum.s
1390 # A file used by all variants of C.
1392 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1393 c-common.h flags.h toplev.h output.h c-pragma.h
$(RTL_H
) ggc.h
1395 # Language-independent files.
1398 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1399 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1400 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1401 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1402 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\"
1403 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1404 Makefile
$(lang_specs_files
) prefix.h gcc.h
1405 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1407 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1409 gccspec.o
: gccspec.c
$(CONFIG_H
) system.h gcc.h
1410 cppspec.o
: cppspec.c
$(CONFIG_H
) system.h gcc.h
1412 tree-check.h
: s-check
; @true
1413 s-check
: gencheck
$(srcdir)/move-if-change
1414 .
/gencheck
> tmp-check.h
1415 $(SHELL
) $(srcdir)/move-if-change tmp-check.h tree-check.h
1418 gencheck
: gencheck.o
$(lang_tree_files
) $(HOST_LIBDEPS
)
1419 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1420 gencheck.o
$(HOST_LIBS
)
1422 gencheck.o
: gencheck.c tree.def
$(CONFIG_H
) hconfig.h system.h
1423 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1424 $(srcdir)/gencheck.c
1426 dumpvers
: dumpvers.c
1428 version.o
: version.c
1430 ggc-common.o
: ggc-common.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) \
1431 flags.h ggc.h varray.h hash.h
1433 ggc-simple.o
: ggc-simple.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h \
1434 ggc.h varray.h hash.h
1436 ggc-page.o
: ggc-page.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) flags.h \
1437 ggc.h varray.h hash.h
1439 ggc-none.o
: ggc-none.c
$(CONFIG_H
) $(RTL_H
) ggc.h
1441 ggc-callbacks.o
: ggc-callbacks.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) ggc.h
1443 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1445 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1446 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1448 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1449 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1450 -DPREFIX
=\"$(prefix)\" \
1451 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1453 convert.o
: convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h convert.h toplev.h
1455 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h \
1457 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
) ggc.h
1458 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1459 function.h
$(EXPR_H
) $(RTL_H
) toplev.h ggc.h
1460 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1462 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) function.h \
1463 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1464 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1465 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) $(BASIC_BLOCK_H
) graph.h \
1466 $(lang_options_files
)
1467 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1468 -DTARGET_NAME
=\"$(target_alias
)\" \
1469 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1471 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h ggc.h
1473 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h basic-block.h
1474 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1475 errors.o
: errors.c
$(CONFIG_H
) system.h errors.h
1477 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1478 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1479 xcoffout.h output.h c-pragma.h toplev.h dbxout.h sdbout.h ggc.h
1480 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1481 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1482 insn-config.h
$(RECOG_H
) output.h toplev.h except.h hash.h ggc.h
1483 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1484 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1485 loop.h
$(RECOG_H
) toplev.h output.h varray.h ggc.h
1486 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1487 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1488 insn-config.h
$(RECOG_H
) output.h except.h toplev.h intl.h ggc.h
1489 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1490 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) \
1491 output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h \
1493 builtins.o
: builtins.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1494 function.h
$(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h \
1495 $(RECOG_H
) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \
1497 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1498 insn-flags.h
$(REGS_H
) toplev.h output.h
1499 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1500 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h toplev.h
1501 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1502 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h \
1503 insn-codes.h toplev.h
1504 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1505 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h \
1507 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1508 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1510 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1511 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1512 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1514 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1515 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1516 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1517 flags.h insn-config.h reload.h output.h defaults.h \
1518 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1519 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1520 flags.h toplev.h output.h dbxout.h
1521 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1522 function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h ggc.h \
1523 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h toplev.h
1524 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1525 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1526 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1527 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h loop.h
1528 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1529 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h function.h \
1530 toplev.h insn-attr.h
1531 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1532 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h function.h toplev.h
1534 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1535 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h function.h \
1536 $(srcdir)/..
/include/hashtab.h ggc.h
1537 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1538 flags.h real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) \
1539 function.h output.h toplev.h
1540 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1541 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h function.h toplev.h
1542 lcm.o
: lcm.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1543 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
)
1544 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1545 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h function.h insn-config.h \
1547 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1548 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1549 function.h toplev.h varray.h
1550 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h function.h \
1551 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h varray.h
1552 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h insn-config.h \
1553 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h recog.h \
1554 insn-flags.h function.h
1555 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h function.h \
1556 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1557 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1558 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1559 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h \
1560 toplev.h function.h output.h ggc.h
1561 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1562 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) \
1563 output.h function.h insn-attr.h toplev.h
1564 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1566 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h function.h \
1567 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1568 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1569 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1570 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1571 function.h real.h toplev.h
1572 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1573 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1574 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h function.h toplev.h
1575 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1576 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) function.h \
1577 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1578 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1579 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h insn-flags.h \
1580 $(RECOG_H
) function.h flags.h output.h
$(EXPR_H
) toplev.h
1581 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1582 $(REGS_H
) toplev.h output.h
$(EXPR_H
) insn-flags.h
1583 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1584 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h function.h \
1585 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1586 haifa-sched.o
: haifa-sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1587 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h function.h \
1588 insn-attr.h toplev.h recog.h
1589 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1590 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h function.h \
1591 real.h output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h except.h \
1592 xcoffout.h defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h \
1594 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) function.h \
1595 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1596 insn-flags.h insn-codes.h real.h toplev.h output.h resource.h basic-block.h
1597 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) recog.h \
1598 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h \
1600 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1601 lists.o
: lists.c
$(CONFIG_H
) system.h toplev.h
$(RTL_H
) ggc.h
1603 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) ggc.h \
1604 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1605 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h function.h
1606 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1608 # Build auxiliary files that support ecoff format.
1609 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1610 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1612 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h
1614 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1615 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1617 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1619 # Build file to support OSF/rose half-pic format.
1620 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1622 # Normally this target is not used; but it is used if you
1623 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1624 # from the GNU Emacs distribution.
1625 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1627 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1628 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1629 -c
`echo alloca.c | sed 's,^\./,,'`
1632 # Generate header and source files from the machine description,
1635 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1636 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1637 insn-attr.h insn-attrtab.c
1639 # The following pair of rules has this effect:
1640 # genconfig is run only if the md has changed since genconfig was last run;
1641 # but the file insn-config.h is touched only when its contents actually change.
1643 # Each of the other insn-* files is handled by a similar pair of rules.
1645 # This causes an anomaly in the results of make -n
1646 # because insn-* is older than s-*
1647 # and thus make -n thinks that insn-* will be updated
1648 # and force recompilation of things that depend on it.
1649 # We use move-if-change precisely to avoid such recompilation.
1650 # But there is no way to teach make -n that it will be avoided.
1652 # Each of the insn-*.[ch] rules has a semicolon at the end,
1653 # for otherwise the system Make on SunOS 4.1 never tries
1654 # to recompile insn-*.o. To avoid problems and extra noise from
1655 # versions of make which don't like empty commands (nothing after the
1656 # trailing `;'), we call true for each.
1658 insn-config.h
: s-config
; @true
1659 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1660 .
/genconfig
$(md_file
) > tmp-config.h
1661 $(SHELL
) $(srcdir)/move-if-change tmp-config.h insn-config.h
1664 insn-flags.h
: s-flags
; @true
1665 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1666 .
/genflags
$(md_file
) > tmp-flags.h
1667 $(SHELL
) $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1670 insn-codes.h
: s-codes
; @true
1671 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1672 .
/gencodes
$(md_file
) > tmp-codes.h
1673 $(SHELL
) $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1676 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1677 insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h function.h
1678 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1680 insn-emit.c
: s-emit
; @true
1681 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1682 .
/genemit
$(md_file
) > tmp-emit.c
1683 $(SHELL
) $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1686 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1687 real.h output.h flags.h system.h function.h hard-reg-set.h resource.h
1688 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1690 insn-recog.c
: s-recog
; @true
1691 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1692 .
/genrecog
$(md_file
) > tmp-recog.c
1693 $(SHELL
) $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1696 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1697 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1698 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1700 insn-opinit.c
: s-opinit
; @true
1701 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1702 .
/genopinit
$(md_file
) > tmp-opinit.c
1703 $(SHELL
) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1706 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1707 insn-config.h recog.h
1708 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1710 insn-extract.c
: s-extract
; @true
1711 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1712 .
/genextract
$(md_file
) > tmp-extract.c
1713 $(SHELL
) $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1716 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1717 system.h insn-config.h recog.h
1718 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1720 insn-peep.c
: s-peep
; @true
1721 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1722 .
/genpeep
$(md_file
) > tmp-peep.c
1723 $(SHELL
) $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1726 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1727 output.h insn-attr.h insn-config.h system.h toplev.h
1728 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1730 insn-attr.h
: s-attr
; @true
1731 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1732 .
/genattr
$(md_file
) > tmp-attr.h
1733 $(SHELL
) $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1736 insn-attrtab.c
: s-attrtab
; @true
1737 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1738 .
/genattrtab
$(md_file
) > tmp-attrtab.c
1739 $(SHELL
) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1742 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1743 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1744 function.h insn-codes.h system.h
1745 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1747 insn-output.c
: s-output
; @true
1748 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1749 .
/genoutput
$(md_file
) > tmp-output.c
1750 $(SHELL
) $(srcdir)/move-if-change tmp-output.c insn-output.c
1753 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h ggc.h
1754 genrtl.c genrtl.h
: s-genrtl
1755 @true
# force gnu make to recheck modification times.
1757 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1758 .
/gengenrtl
-h
>tmp-genrtl.h
1759 $(SHELL
) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1760 .
/gengenrtl
>tmp-genrtl.c
1761 $(SHELL
) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1764 # Compile the programs that generate insn-* from the machine description.
1765 # They are compiled with $(HOST_CC), and associated libraries,
1766 # since they need to run on this machine
1767 # even if GCC is being compiled to run on some other machine.
1769 # $(CONFIG_H) is omitted from the deps of the gen*.o
1770 # because these programs don't really depend on anything
1771 # about the target machine. They do depend on config.h itself,
1772 # since that describes the host machine.
1774 # Pass the md file through cpp if the target requests it.
1775 $(MD_FILE
): $(MD_DEPS
)
1777 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1780 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1781 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1782 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1784 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1785 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1787 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1788 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1789 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1791 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1792 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1794 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1795 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1796 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1798 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1799 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1801 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1802 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1803 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1805 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1806 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1808 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1809 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1810 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1812 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1813 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1815 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1816 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1817 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1819 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1820 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1822 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1823 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1824 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1826 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h errors.h
1827 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1829 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1830 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1831 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1833 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1834 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1836 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1837 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1838 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1840 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1841 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1843 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1844 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1845 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1847 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h errors.h ggc.h
1848 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1850 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBDEPS
)
1851 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1852 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_ERRORS
) $(HOST_LIBS
)
1854 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h errors.h
1855 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1857 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1858 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1859 gengenrtl.o
$(HOST_LIBS
)
1861 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1862 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1864 # Compile the libraries to be used by gen*.
1865 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1866 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1867 # with the rules for rtl.o, alloca.o, etc.
1868 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1869 rm -f
$(HOST_PREFIX
)rtl.c
1870 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1871 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1873 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
) \
1874 bitmap.h basic-block.h
1875 rm -f
$(HOST_PREFIX
)print-rtl.c
1876 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1877 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1879 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1880 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1881 rm -f
$(HOST_PREFIX
)bitmap.c
1882 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1883 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1885 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1886 rm -f
$(HOST_PREFIX
)rtlanal.c
1887 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1888 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1890 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1891 rm -f
$(HOST_PREFIX
)alloca.c
1892 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1893 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1895 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1896 rm -f
$(HOST_PREFIX
)obstack.c
1897 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1898 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1900 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1901 rm -f
$(HOST_PREFIX
)vfprintf.c
1902 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1903 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1905 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1906 rm -f
$(HOST_PREFIX
)doprint.c
1907 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1908 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1910 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1911 rm -f
$(HOST_PREFIX
)malloc.c
1912 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1913 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1915 $(HOST_PREFIX_1
)errors.o
: errors.c
1916 rm -f
$(HOST_PREFIX
)errors.c
1917 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/errors.c
> $(HOST_PREFIX
)errors.c
1918 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)errors.c
1921 # This satisfies the dependency that we get if you cross-compile a compiler
1922 # that does not need to compile alloca, malloc or whatever.
1924 touch
$(HOST_PREFIX_1
)
1928 # Remake internationalization support.
1930 intl.o
: intl.c intl.h gansidecl.h Makefile
1931 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1932 -DLOCALEDIR
=\"$(localedir
)\" \
1933 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1935 # This is needed to when doing a partial build after a `make clean'.
1936 # libintl.a does not depend on intl.all,
1937 # as that would force a lot of recompiling.
1938 $(top_builddir
)/intl
/libintl.a
:
1939 @echo
"$(MAKE) intl.all"
1940 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1942 # Make sure all the headers are there for xgettext to scan.
1943 $(INTL_TARGETS
): $(srcdir)/c-gperf.h \
1944 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c
1946 intl.
all intl.
install intl.
uninstall intl.distdir \
1947 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1948 @for d in
$(INTL_SUBDIRS
); do \
1949 target
=`expr $@ : 'intl.\(.*\)'` && \
1950 echo
"(cd $$d && $(MAKE) $$target)" && \
1951 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1954 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1955 # but we need them for the `make extraclean' in distdir-finish.
1957 for d in
$(INTL_SUBDIRS
); do \
1958 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1961 # Remake cpp and protoize.
1963 # Making the preprocessor
1964 cpp$(exeext
): $(CCCP
)$(exeext
)
1966 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1967 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
1968 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
1969 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
1970 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h mbchar.h
1971 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1972 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1973 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1975 PREPROCESSOR_DEFINES
= \
1976 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1977 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1978 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1979 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1980 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\"
1981 # We use $(libsubdir)/$(unlibsubdir) to match the
1982 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1983 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
1984 mbchar.h
prefix.h Makefile.in
1985 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1986 $(PREPROCESSOR_DEFINES
) \
1987 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1989 LIBCPP_OBJS
= cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
1990 cppinit.o cppulp.o
prefix.o version.o mbchar.o @extra_cpp_objs@
1992 # All the other archives built/used by this makefile are for targets. This
1993 # one is strictly for the host.
1995 libcpp.a
: $(LIBCPP_OBJS
)
1996 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
1997 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
1999 cppmain
$(exeext
): cppmain.o intl.o libcpp.a
$(LIBDEPS
)
2000 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
2001 intl.o libcpp.a
$(LIBS
)
2003 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h system.h
2005 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
2006 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
2007 cpphash.o
: cpphash.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
2008 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h
2009 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h system.h
2010 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
2011 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h intl.h system.h
2013 cppinit.o
: cppinit.c
$(CONFIG_H
) cpplib.h intl.h system.h \
2014 cpphash.h
prefix.h output.h Makefile
2015 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2016 $(PREPROCESSOR_DEFINES
) \
2017 -c
`echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
2019 # Note for the stamp targets, we run the program `true' instead of
2020 # having an empty command (nothing following the semicolon).
2022 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
2024 PROTO_OBJS
= intl.o version.o
2026 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2027 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2029 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2030 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2032 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2034 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2035 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2036 $(srcdir)/protoize.c
2038 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2039 $(CONFIG_H
) system.h Makefile
2040 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2041 $(DRIVER_DEFINES
) $(PREPROCESSOR_DEFINES
) \
2042 $(srcdir)/unprotoize.c
2044 # This info describes the target machine, so compile with GCC just built.
2045 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2047 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2048 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2049 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2050 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2051 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2054 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2055 -rm -f tmp-proto.
[cso
]
2056 cp
$(srcdir)/protoize.c tmp-proto.c
2057 chmod u
+w tmp-proto.c
2058 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2059 $(GCC_CFLAGS) $(INCLUDES) \
2060 -DGCC_INCLUDE_DIR=0 \
2061 -DGPLUSPLUS_INCLUDE_DIR=0 \
2062 -DCROSS_INCLUDE_DIR=0 \
2063 -DTOOL_INCLUDE_DIR=0 \
2064 -DSTANDARD_EXEC_PREFIX=0 \
2065 -DDEFAULT_TARGET_MACHINE=0 \
2066 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2067 @echo
'**********' Expect
400 lines of differences.
2068 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2069 -wc
-l tmp-proto.diff
2070 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2071 $(GCC_CFLAGS) $(INCLUDES) \
2072 -DGCC_INCLUDE_DIR=0 \
2073 -DGPLUSPLUS_INCLUDE_DIR=0 \
2074 -DCROSS_INCLUDE_DIR=0 \
2075 -DTOOL_INCLUDE_DIR=0 \
2076 -DSTANDARD_EXEC_PREFIX=0 \
2077 -DDEFAULT_TARGET_MACHINE=0 \
2078 -DDEFAULT_TARGET_VERSION=0" tmp-proto.c
2079 @echo Expect zero differences.
2080 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2081 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2083 gcov.o
: gcov.c gcov-io.h intl.h system.h
2085 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2086 # upon whether $(exeext) is empty or not.
2087 GCOV_OBJS
= gcov.o intl.o
2088 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2089 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2091 # Build the include directory. The stamp files are stmp-* rather than
2092 # s-* so that mostlyclean does not force the include directory to
2095 # Build the include directory including float.h (which no longer depends upon
2097 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h
2098 # Copy in the headers provided with gcc.
2099 # The sed command gets just the last file name component;
2100 # this is necessary because VPATH could add a dirname.
2101 # Using basename would be simpler, but some systems don't have it.
2102 # The touch command is here to workaround an AIX/Linux NFS bug.
2103 for file in ..
$(USER_H
); do \
2104 if
[ X
$$file != X..
]; then \
2105 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2106 touch
include/$$realfile; \
2107 rm -f
include/$$realfile; \
2108 cp
$$file include; \
2109 chmod a
+r
include/$$realfile; \
2112 rm -f
include/limits.h
2113 cp xlimits.h
include/limits.h
2114 chmod a
+r
include/limits.h
2115 rm -f
include/float.h
2116 if
[ x
$(FLOAT_H
) != xMakefile.in
]; then \
2117 cp
$(srcdir)/config
/$(FLOAT_H
) include/float.h
&& \
2118 chmod a
+r
include/float.h
; \
2120 # Install the README
2121 rm -f
include/README
2122 cp
$(srcdir)/README-fixinc
include/README
2123 chmod a
+r
include/README
2126 # Now that float.h no longer depends upon enquire, this is actually a no-op.
2130 FIXINCSRCDIR
=$(srcdir)/fixinc
2131 fixinc.sh
: $(FIXINCSRCDIR
)/mkfixinc.sh
$(FIXINCSRCDIR
)/fixincl.c \
2132 $(FIXINCSRCDIR
)/procopen.c
$(FIXINCSRCDIR
)/gnu-regex.c \
2133 $(FIXINCSRCDIR
)/server.c
$(FIXINCSRCDIR
)/gnu-regex.h \
2134 $(FIXINCSRCDIR
)/server.h
$(FIXINCSRCDIR
)/inclhack.def
2135 MAKE
="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
2136 export MAKE
srcdir ; \
2137 cd .
/fixinc
; $(SHELL
) $${srcdir}/mkfixinc.sh
$(target
)
2139 ##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
2142 ## if [ x$(FIXINCLUDES) != xMakefile.in ]; \
2144 ## for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
2145 ## if [ -d $$dir ]; \
2147 ## $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
2150 ## if [ x$(INSTALL_ASSERT_H) != x ] ; \
2152 ## rm -f include/assert.h; \
2153 ## cp $(srcdir)/assert.h include/assert.h; \
2154 ## chmod a+r include/assert.h; \
2159 # Build fixed copies of system files.
2160 stmp-fixinc
: fixinc.sh gsyslimits.h
2161 rm -rf
include; mkdir
include
2163 TARGET_MACHINE
=$(target
); srcdir=`cd $(srcdir); pwd`; \
2164 INSTALL_ASSERT_H
=$(INSTALL_ASSERT_H
); SHELL
=$(SHELL
) ;\
2165 export TARGET_MACHINE
srcdir INSTALL_ASSERT_H SHELL
; \
2166 $(SHELL
) .
/fixinc.sh
`pwd`/include $(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
)
2167 rm -f
include/syslimits.h
2168 if
[ -f
include/limits.h
]; then \
2169 mv
include/limits.h
include/syslimits.h
; \
2171 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2173 chmod a
+r
include/syslimits.h
2174 # If $(SYSTEM_HEADER_DIR) is $(tooldir)/sys-include, and
2175 # that directory exists, then make sure that $(libsubdir) exists.
2176 # This is because cpp is compiled to find $(tooldir)/include via
2177 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2179 # We deliberately use tooldir instead of gcc_tooldir here. gcc_tooldir
2180 # won't work because libsubdir doesn't exist yet.
2181 if
[ "$(SYSTEM_HEADER_DIR)" = "$(tooldir)/sys-include" ] \
2182 && [ -d
$(tooldir
)/sys-include
]; then \
2183 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2184 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2185 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2186 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2190 # Files related to the fixproto script.
2192 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2193 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2195 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2197 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2198 mv tmp-deduced.h deduced.h
; \
2203 GEN_PROTOS_OBJS
= gen-protos.o scan.o libcpp.a
2204 gen-protos
: $(GEN_PROTOS_OBJS
) $(HOST_LIBDEPS
)
2205 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o gen-protos \
2206 $(GEN_PROTOS_OBJS
) $(HOST_LIBS
)
2208 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2209 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2211 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2212 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2214 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2215 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2216 mv tmp-fixtmp.c fixtmp.c
2217 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2218 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2219 | .
/gen-protos
>xsys-protos.hT
2220 mv xsys-protos.hT xsys-protos.h
2223 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2225 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2226 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
)
2228 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2229 xsys-protos.h
$(build_xm_file
) system.h cpplib.h cpphash.h
2230 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2232 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h
2233 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2235 # stmp-fixproto depends on this, not on fix-header directly.
2236 # The idea is to make sure fix-header gets built,
2237 # but not rerun fixproto after each stage
2238 # just because fix-header's mtime has changed.
2239 fixhdr.ready
: fix-header
2240 -if
[ -f fixhdr.ready
] ; then \
2243 touch fixhdr.ready
; \
2246 # stmp-headers is to make sure fixincludes has already finished.
2247 # The if statement is so that we don't run fixproto a second time
2248 # if it has already been run on the files in `include'.
2249 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2250 @echo
"Various warnings and error messages from fixproto are normal"
2251 -if
[ -d
include ] ; then true
; else mkdir
include; chmod a
+rx
include; fi
2252 -if
[ -f
include/fixed
] ; then true
; \
2254 : This line works around a
'make' bug in BSDI
1.1.
; \
2255 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2256 mkinstalldirs
="$(SHELL) $(srcdir)/mkinstalldirs"; \
2257 export mkinstalldirs
; \
2258 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2259 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2261 touch
include/fixed
; \
2265 # Remake the info files.
2268 info: cpp.
info gcc.
info lang.
info
2270 cpp.
info: $(srcdir)/cpp.texi
2271 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2273 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2274 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2275 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2276 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2278 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2280 # This works with GNU Make's default rule.
2281 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2282 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2283 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2284 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2286 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2288 cpp.
dvi: $(srcdir)/cpp.texi
2289 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2291 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2294 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2295 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2296 --no-split
-o INSTALL install1.texi
2298 # Deletion of files made during compilation.
2299 # There are four levels of this:
2300 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2301 # `mostlyclean' is useful while working on a particular type of machine.
2302 # It deletes most, but not all, of the files made by compilation.
2303 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2304 # `clean' deletes everything made by running `make all'.
2305 # `distclean' also deletes the files made by config.
2306 # `maintainer-clean' also deletes everything that could be regenerated
2307 # automatically, except for `configure'.
2308 # We remove as much from the language subdirectories as we can
2309 # (less duplicated code).
2311 INTL_MOSTLYCLEAN
= intl.
mostlyclean
2312 mostlyclean: $(INTL_MOSTLYCLEAN
) lang.
mostlyclean
2313 -rm -f
$(STAGESTUFF
)
2314 # Delete the temporary source copies for cross compilation.
2315 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2316 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2317 -rm -f
$(HOST_PREFIX_1
)obstack.c
2318 # Delete the temp files made in the course of building libgcc.a.
2319 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2320 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2321 # Delete other built files.
2322 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2323 # Delete the stamp and temporary files.
2324 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2325 -rm -f
*/stamp-
* */tmp-
*
2326 # Delete debugging dump files.
2327 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2328 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2329 -rm -f
*.regmove
*.mach
*.bp
*.gcse
*.flow2
*.peephole2
2330 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2331 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2332 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
*/*.flow2
2333 -rm -f
*/*.peephole2
2334 # Delete some files made during installation.
2335 -rm -f specs float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2336 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2337 # Delete files generated for fixproto
2338 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2339 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2340 # Delete unwanted output files from TeX.
2341 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2342 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2343 # Delete sorted indices we don't actually use.
2344 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2345 # Delete core dumps.
2349 # Delete all files made by compilation
2350 # that don't exist in the distribution.
2351 INTL_CLEAN
= intl.
clean
2352 clean: mostlyclean $(INTL_CLEAN
) lang.
clean
2353 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2357 -if
[ -f md.pre-cpp
]; then \
2360 # Delete the include directory.
2362 # Delete files used by the "multilib" facility (including libgcc subdirs).
2363 -rm -f multilib.h tmpmultilib
*
2364 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2365 rm -rf
$(MULTILIB_DIRNAMES
); \
2366 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2367 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2369 -rm -fr stage1 stage2 stage3 stage4
2371 # Delete all files that users would normally create
2372 # while building and installing GCC.
2373 INTL_DISTCLEAN
= intl.
distclean
2374 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2375 -rm -f tm.h tm_p.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2377 -rm -f config.status config.run config.cache config.bak
2378 -rm -f Make-lang Make-hooks Make-host Make-target
2379 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2380 -rm -f gthr-default.h
2381 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2382 -rm -f c-parse.output
2385 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2386 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2387 -rm -f intl
/libintl.h libintl.h
2389 # Delete anything likely to be found in the source directory
2390 # that shouldn't be in the distribution.
2391 extraclean
: distclean lang.extraclean
2392 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2393 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2394 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2395 -rm -f config
/*/*.orig config
/*/*.rej
2396 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2397 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2398 -rm -f
*lose config
/*lose config
/*/*lose
2399 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2400 -rm -f y.tab.c
yacc.
*
2401 -rm -f
*/=* */"#"* */*~
*
2402 -rm -f
*/patch
* */*.orig
*/*.rej
2403 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2404 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2405 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2407 # Get rid of every file that's generated from some other file, except for `configure'.
2408 # Most of these files ARE PRESENT in the GCC distribution.
2409 # We define INTL_DISTCLEAN, INTL_CLEAN & INTL_MOSTLYCLEAN to be empty in the
2410 # submake, so that we don't descend into intl after its makefile has been
2413 @echo
'This command is intended for maintainers to use; it'
2414 @echo
'deletes files that may need special tools to rebuild.'
2415 $(MAKE
) INTL_DISTCLEAN
= INTL_CLEAN
= INTL_MOSTLYCLEAN
= \
2416 intl.maintainer-clean lang.maintainer-clean
distclean
2417 -rm -f c-parse.y c-gperf.h
2418 -rm -f c-parse.c c-parse.h c-parse.output
2419 -rm -f cexp.c cexp.output TAGS
2420 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2421 -rm -f gcc.
info* gcc.??s gcc.
*aux
2423 # Entry points `install' and `uninstall'.
2424 # Also use `install-collect2' to install collect2 when the config files don't.
2426 # The semicolon is to prevent the install.sh -> install default rule
2427 # from doing anything. Having it run true helps avoid problems and
2428 # noise from versions of make which don't like to have null commands.
2429 install: $(INSTALL_TARGET
) ; @true
2431 # Copy the compiler files into directories where they will be run.
2432 # Install the driver last so that the window when things are
2434 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2435 $(INSTALL_CPP
) install-man install-info intl.
install lang.install-normal \
2438 # Do nothing while making gcc with a cross-compiler. The person who
2439 # makes gcc for the target machine has to know how to put a complete
2440 # gcc together by hand.
2441 install-build
: force
2442 @echo You have to
install gcc on your target machine by hand.
2444 # Run this on the target machine
2445 # to finish installation of cross compiler.
2446 # This is not used anymore now that float.h does not depend on enquire.
2447 install-cross-rest
: install-float-h-cross
2449 # Handle cpp installation.
2450 install-cpp
: xcpp
$(exeext
)
2451 -rm -f
$(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2452 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(bindir)/$(CPP_INSTALL_NAME
)$(exeext
)
2453 if
[ x
$(cpp_install_dir
) != x
]; then \
2454 rm -f
$(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2455 $(INSTALL_PROGRAM
) -m
755 xcpp
$(exeext
) $(prefix)/$(cpp_install_dir
)/$(CPP_INSTALL_NAME
)$(exeext
); \
2459 -rm -f
$(bindir)/cpp
2460 -if
[ x
$(cpp_install_dir
) != x
]; then \
2461 rm -f
$(prefix)/$(cpp_install_dir
)/cpp; \
2464 # Install float.h for cross compiler.
2465 # Run this on the target machine!
2466 # This is not used anymore now that float.h does not depend on enquire.
2467 install-float-h-cross
: installdirs
2468 # if [ -f enquire ] ; then true; else false; fi
2469 # Note: don't use -. We should fail right away if enquire was not made.
2470 .
/enquire
-f
> $(tmpdir
)/float.h
2471 -rm -f
$(libsubdir
)/include/float.h
2472 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2473 -rm -f
$(tmpdir
)/float.h
2474 chmod a-x
$(libsubdir
)/include/float.h
2476 # Create the installation directories.
2478 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2479 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2480 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2481 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2482 # This dir isn't currently searched by cpp.
2483 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2484 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2485 fdir
=$${fdir}/$${dir}; \
2486 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2488 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2489 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2490 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2491 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2492 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2493 # We don't use mkdir -p to create the parents of man1dir,
2494 # because some systems don't support it.
2495 # Instead, we use this technique to create the immediate parent of man1dir.
2496 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2497 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2498 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2500 # Install the compiler executables built during cross compilation.
2501 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2502 for file in
$(COMPILERS
); do \
2503 if
[ -f
$$file ] ; then \
2504 rm -f
$(libsubdir
)/$$file; \
2505 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2509 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2510 if
[ x
"$$file" != x..
]; then \
2511 rm -f
$(libsubdir
)/$$file; \
2512 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2515 for file in
$(EXTRA_PARTS
) ..
; do \
2516 if
[ x
"$$file" != x..
]; then \
2517 rm -f
$(libsubdir
)/$$file; \
2518 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2519 chmod a-x
$(libsubdir
)/$$file; \
2522 # Don't mess with specs if it doesn't exist yet.
2523 -if
[ -f specs
] ; then \
2524 rm -f
$(libsubdir
)/specs
; \
2525 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2526 chmod a-x
$(libsubdir
)/specs
; \
2528 # Install protoize if it was compiled.
2529 -if
[ -f protoize
$(exeext
) ]; \
2531 if
[ -f gcc-cross
$(exeext
) ] ; then \
2532 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2533 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2534 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2535 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2537 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2538 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2539 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2540 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2542 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2543 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2544 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2546 -rm -f
$(libsubdir
)/cpp$(exeext
)
2547 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2548 # Install gcov if it was compiled.
2549 -if
[ -f gcov
$(exeext
) ]; \
2551 rm -f
$(bindir)/gcov
$(exeext
); \
2552 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2555 # Install the driver program as $(target_alias)-gcc
2556 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2557 install-driver
: xgcc
$(exeext
)
2558 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2559 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2560 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2561 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2562 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2563 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2566 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2567 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2568 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2569 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2570 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2573 # Install the info files.
2574 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2575 # to do the install.
2576 install-info
: doc
installdirs lang.install-info
2577 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2578 for f in
cpp.
info* gcc.
info*; do \
2579 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2581 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2582 if
[ -f
$(infodir)/dir ] ; then \
2583 for f in
cpp.
info gcc.
info; do \
2584 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2588 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2590 # Install the man pages.
2591 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2592 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2593 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2594 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2595 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2597 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2598 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2599 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2601 -rm -f
$(man1dir)/cccp
$(manext)
2602 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2603 -chmod a-x
$(man1dir)/cccp
$(manext)
2605 # Install the library.
2606 install-libgcc
: libgcc.a
installdirs
2607 -if
[ -f libgcc.a
] ; then \
2608 rm -f
$(libsubdir
)/libgcc.a
; \
2609 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2610 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2611 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2612 chmod a-x
$(libsubdir
)/libgcc.a
; \
2615 # Install multiple versions of libgcc.a.
2616 install-multilib
: stmp-multilib
installdirs
2617 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2618 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2619 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; chmod a
+rx
$(libsubdir
)/$${dir}; fi
; \
2620 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2621 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2622 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2624 if
$(RANLIB_TEST_FOR_TARGET
); then \
2625 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2627 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2630 # Install all the header files built in the include subdirectory.
2631 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2632 # Fix symlinks to absolute paths in the installed include directory to
2633 # point to the installed directory, not the build directory.
2634 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2635 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2636 if
[ $$?
-eq
0 ]; then \
2637 dir=`cd include; pwd`; \
2638 for i in
$$files; do \
2639 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2640 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2641 rm -f
$(libsubdir
)/include/$$i; \
2642 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2647 # Create or recreate the gcc private include file directory.
2648 install-include-dir
: installdirs
2649 -rm -rf
$(libsubdir
)/include
2650 mkdir
$(libsubdir
)/include
2651 -chmod a
+rx
$(libsubdir
)/include
2653 # Install the include directory using tar.
2654 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2655 # We use `pwd`/include instead of just include to problems with CDPATH
2656 # Unless a full pathname is provided, some shells would print the new CWD,
2657 # found in CDPATH, corrupting the output. We could just redirect the
2658 # output of `cd', but some shells lose on redirection within `()'s
2659 (cd
`pwd`/include ; \
2660 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar xpf
- )
2661 # /bin/sh on some systems returns the status of the first tar,
2662 # and that can lose with GNU tar which always writes a full block.
2663 # So use `exit 0' to ignore its exit status.
2665 # Install the include directory using cpio.
2666 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2667 # See discussion about the use of `pwd` above
2668 cd
`pwd`/include ; \
2669 find .
-print | cpio
-pdum
$(libsubdir
)/include
2671 # Put assert.h where it won't override GNU libc's assert.h.
2672 # It goes in a dir that is searched after GNU libc's headers;
2673 # thus, the following conditionals are no longer needed.
2674 # But it's not worth deleting them now.
2675 ## Don't replace the assert.h already there if it is not from GCC.
2676 ## This code would be simpler if it tested for -f ... && ! grep ...
2677 ## but supposedly the ! operator is missing in sh on some systems.
2678 install-assert-h
: assert.h
installdirs
2679 if
[ -f
$(assertdir
)/assert.h
]; \
2681 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2683 rm -f
$(assertdir
)/assert.h
; \
2684 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2685 chmod a-x
$(assertdir
)/assert.h
; \
2689 rm -f
$(assertdir
)/assert.h
; \
2690 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2691 chmod a-x
$(assertdir
)/assert.h
; \
2694 # Use this target to install the program `collect2' under the name `collect2'.
2695 install-collect2
: collect2
installdirs
2696 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2697 # Install the driver program as $(libsubdir)/gcc for collect2.
2698 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2700 # Cancel installation by deleting the installed files.
2701 uninstall: intl.
uninstall lang.
uninstall $(UNINSTALL_CPP
)
2702 -rm -rf
$(libsubdir
)
2703 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2704 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2705 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2706 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2707 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2708 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2709 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2710 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2711 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2712 -rm -rf
$(man1dir)/cccp
$(manext)
2713 -rm -rf
$(man1dir)/protoize
$(manext)
2714 -rm -rf
$(man1dir)/unprotoize
$(manext)
2715 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2717 # These targets are for the dejagnu testsuites. The file site.exp
2718 # contains global variables that all the testsuites will use.
2720 # Set to $(target_alias)/ for cross.
2721 target_subdir
= @target_subdir@
2723 site.exp
: .
/config.status Makefile
2724 @echo
"Making a new config file..."
2727 -@mv site.exp site.bak
2728 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2729 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2730 @echo
"# add them to the last section" >> .
/tmp0
2731 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2732 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2733 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2734 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2735 @echo
"set target_triplet $(target)" >> .
/tmp0
2736 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2737 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2738 @echo
"set CFLAGS \"\"" >> .
/tmp0
2739 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2740 # If newlib has been configured, we need to pass -B to gcc so it can find
2741 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2742 # message if it doesn't, but the testsuite is supposed to ignore the message -
2743 # it's too difficult to tell when to and when not to pass -B (not all targets
2744 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2745 # seems like too selective a test.
2746 # ??? Another way to solve this might be to rely on linker scripts. Then
2747 # theoretically the -B won't be needed.
2748 # We also need to pass -L ../ld so that the linker can find ldscripts.
2749 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2750 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2751 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2752 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2753 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2754 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2757 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2758 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2761 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2762 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2763 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2764 @cat .
/tmp0
> site.exp
2765 @cat site.bak | sed \
2766 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2769 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2771 check: $(CHECK_TARGETS
)
2773 testsuite
/site.exp
: site.exp
2774 if
[ -d testsuite
]; then \
2779 rm -rf testsuite
/site.exp
2780 cp site.exp testsuite
/site.exp
2782 check-g
++: testsuite
/site.exp
2783 -rootme
=`pwd`; export rootme
; \
2784 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2786 EXPECT
=${EXPECT} ; export EXPECT
; \
2787 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2788 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2789 export TCL_LIBRARY
; fi
; \
2790 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2792 check-gcc
: testsuite
/site.exp
2793 -rootme
=`pwd`; export rootme
; \
2794 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2796 EXPECT
=${EXPECT} ; export EXPECT
; \
2797 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2798 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2799 export TCL_LIBRARY
; fi
; \
2800 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2802 check-g77
: testsuite
/site.exp
2803 -rootme
=`pwd`; export rootme
; \
2804 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2806 EXPECT
=${EXPECT} ; export EXPECT
; \
2807 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2808 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2809 export TCL_LIBRARY
; fi
; \
2810 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2812 check-objc
: testsuite
/site.exp
2813 -rootme
=`pwd`; export rootme
; \
2814 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2816 EXPECT
=${EXPECT} ; export EXPECT
; \
2817 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2818 TCL_LIBRARY
=`cd .. ; cd ${srcdir}/../tcl/library ; pwd` ; \
2819 export TCL_LIBRARY
; fi
; \
2820 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2822 # These exist for maintenance purposes.
2824 # Update the tags table.
2828 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2829 etags
*.y
*.h
*.c
; \
2833 # Create the distribution tar.gz file.
2835 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2836 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2838 tmp-gcc.xtar
: distdir
2839 # Make the distribution.
2840 tar -chf tmp-gcc.xtar gcc-
$(version
)
2843 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2845 # This target exists to do the initial work before the language specific
2847 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2848 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2849 $(srcdir)/version.c TAGS
2850 @case
'$(USE_NLS)' in \
2852 *) echo
"configure with --enable-nls before making a distribution"; \
2855 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2857 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2859 # Update the version number in README
2860 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2861 { $$6 = version; print $$0 } \
2862 $$1 " " $$2 " " $$3 != "This directory contains"' \
2863 version
=$(version
) $(srcdir)/README
> tmp.README
2864 mv tmp.README README
2865 -rm -rf gcc-
$(version
) tmp
2866 # Put all the files in a temporary subdirectory
2867 # which has the name that we want to have in the tar file.
2874 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2875 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2877 if
test "$(srcdir)" != "." ; then \
2878 for file in c-parse.c cexp.c
; do \
2879 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2882 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2883 if
test -d
$(srcdir)/config
/$$file \
2884 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2885 mkdir tmp
/config
/$$file; \
2886 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2887 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2890 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2893 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2894 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2896 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2897 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2899 $(LN_S
) .gdbinit tmp
2901 # Finish making `distdir', after the languages have done their thing.
2903 mv tmp gcc-
$(version
)
2904 # Get rid of everything we don't want in the distribution. We'd want
2905 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2907 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2910 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2911 < po
/POTFILES.in
> tmp.POTFILES
2912 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2913 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2914 diff tmp.POTFILES tmp.src ||
{ \
2915 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2920 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2921 lang.distdir distdir-finish
2923 # make diff oldversion=M.N
2924 # creates a diff file between an older distribution and this one.
2925 # The -P option assumes this is GNU diff.
2927 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2928 -x cexp.c
-x
-x TAGS
-x INSTALL \
2929 -x configure
-x config.in \
2930 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2931 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2932 $(LANG_DIFF_EXCLUDES
) \
2933 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2935 bootstrap bootstrap-lean
: force
2936 # Only build the C compiler for stage1, because that is the only one that
2937 # we can guarantee will build with the native compiler, and also it is the
2938 # only thing useful for building stage2.
2939 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2941 # This used to define ALLOCA as empty, but that would lead to bad results
2942 # for a subsequent `make install' since that would not have ALLOCA empty.
2943 # To prevent `make install' from compiling alloca.o and then relinking cc1
2944 # because alloca.o is newer, we permit these recursive makes to compile
2945 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2946 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2948 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2949 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2951 bootstrap2 bootstrap2-lean
: force
2952 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2954 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2955 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2957 bootstrap3 bootstrap3-lean
: force
2958 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2960 bootstrap4 bootstrap4-lean
: force
2961 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2963 # Compare the object files in the current directory with those in the
2966 # ./ avoids bug in some versions of tail.
2967 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2969 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2970 for file in
*$(objext
); do \
2971 tail
+16c .
/$$file > tmp-foo1
; \
2972 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2973 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2975 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2976 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2977 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2978 for file in
$$dir/*$(objext
); do \
2979 tail
+16c .
/$$file > tmp-foo1
; \
2980 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2981 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2986 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2987 if
[ -f .bad_compare
]; then \
2988 echo
"Bootstrap comparison failure!"; \
2993 *-lean
) rm -rf stage
$$stage ;; \
2998 # Compare the object files in the current directory with those in the
2999 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
3000 # running tail and the overhead of twice copying each object file.
3002 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
3004 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3005 for file in
*$(objext
); do \
3006 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3008 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3009 for
dir in tmp-foo intl
$(SUBDIRS
); do \
3010 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
3011 for file in
$$dir/*$(objext
); do \
3012 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
3016 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
3017 if
[ -f .bad_compare
]; then \
3018 echo
"Bootstrap comparison failure!"; \
3023 *-lean
) rm -rf stage
$$stage ;; \
3027 # Copy the object files from a particular stage into a subdirectory.
3029 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
3030 -for
dir in intl
$(SUBDIRS
) ; \
3032 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
3034 -mv
$(STAGESTUFF
) stage1
3035 -mv intl
/*$(objext
) stage1
/intl
3036 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3037 # dir will work properly.
3038 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3039 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3040 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3041 -rm -f stage1
/libgcc.a
3043 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3044 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3046 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3047 cp stage1
/$${f} .
; \
3050 stage1
: force stage1-start lang.stage1
3053 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3054 -for
dir in intl
$(SUBDIRS
) ; \
3056 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3058 -mv
$(STAGESTUFF
) stage2
3059 -mv intl
/*$(objext
) stage2
/intl
3060 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3061 # dir will work properly.
3062 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3063 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3064 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3065 -rm -f stage2
/libgcc.a
3067 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3068 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3070 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3071 cp stage2
/$${f} .
; \
3074 stage2
: force stage2-start lang.stage2
3077 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3078 -for
dir in intl
$(SUBDIRS
) ; \
3080 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3082 -mv
$(STAGESTUFF
) stage3
3083 -mv intl
/*$(objext
) stage3
/intl
3084 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3085 # dir will work properly.
3086 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3087 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3088 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3089 -rm -f stage3
/libgcc.a
3091 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3092 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3094 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3095 cp stage3
/$${f} .
; \
3098 stage3
: force stage3-start lang.stage3
3101 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3102 -for
dir in intl
$(SUBDIRS
) ; \
3104 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3106 -mv
$(STAGESTUFF
) stage4
3107 -mv intl
/*$(objext
) stage4
/intl
3108 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3109 # dir will work properly.
3110 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3111 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3112 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3113 -rm -f stage4
/libgcc.a
3115 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3116 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3118 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3119 cp stage4
/$${f} .
; \
3122 stage4
: force stage4-start lang.stage4
3124 # Copy just the executable files from a particular stage into a subdirectory,
3125 # and delete the object files. Use this if you're just verifying a version
3126 # that is pretty sure to work, and you are short of disk space.
3127 risky-stage1
: stage1
3130 risky-stage2
: stage2
3133 risky-stage3
: stage3
3136 risky-stage4
: stage4
3139 #In GNU Make, ignore whether `stage*' exists.
3140 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3141 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3146 # The enquire rules are still useful for building new float-anything.h.
3147 # Special flags for compiling enquire.
3148 # We disable optimization to make floating point more reliable.
3149 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3150 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3152 # Enquire target (This is a variable so that a target can choose not to
3156 # Test to see whether <float.h> exists in the system header files,
3157 # and is not derived from GCC.
3159 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3160 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3163 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3164 # to ensure, we're emitting a full blown <float.h> ourselves.
3165 FLOAT_H_TEST
= false
3167 # Used to compile enquire with standard cc, but have forgotten why.
3168 # Let's try with GCC.
3169 enquire
: enquire.o
$(GCC_PARTS
)
3170 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3171 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3172 if
$(FLOAT_H_TEST
); then \
3173 rm -f
include/float.h
; \
3174 SYS_FLOAT_H_WRAP
=1; \
3176 SYS_FLOAT_H_WRAP
=0; \
3178 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3179 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3180 -I.
-c
$(srcdir)/enquire.c
3182 # Create float.h source for the native machine.
3183 # Make it empty if we can use the system float.h without changes.
3184 float.h-nat
: enquire
3185 -.
/enquire
-f
> tmp-float.h
3186 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3187 mv tmp-float.h float.h-nat
3189 # Create a dummy float.h source for a cross-compiler.
3190 # ??? This isn't used anymore. Should we create config/float-unkn.h
3191 # and make that the default float_format in configure?
3193 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3194 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3195 echo
"#endif" >> t-float.h-cross
3196 mv t-float.h-cross float.h-cross