1 /* Convert RTL to assembler code and output it, for GNU compiler.
2 Copyright (C) 1987-2018 Free Software Foundation, Inc.
4 This file is part of GCC.
6 GCC is free software; you can redistribute it and/or modify it under
7 the terms of the GNU General Public License as published by the Free
8 Software Foundation; either version 3, or (at your option) any later
11 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
12 WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 You should have received a copy of the GNU General Public License
17 along with GCC; see the file COPYING3. If not see
18 <http://www.gnu.org/licenses/>. */
20 /* This is the final pass of the compiler.
21 It looks at the rtl code for a function and outputs assembler code.
23 Call `final_start_function' to output the assembler code for function entry,
24 `final' to output assembler code for some RTL code,
25 `final_end_function' to output assembler code for function exit.
26 If a function is compiled in several pieces, each piece is
27 output separately with `final'.
29 Some optimizations are also done at this level.
30 Move instructions that were made unnecessary by good register allocation
31 are detected and omitted from the output. (Though most of these
32 are removed by the last jump pass.)
34 Instructions to set the condition codes are omitted when it can be
35 seen that the condition codes already had the desired values.
37 In some cases it is sufficient if the inherited condition codes
38 have related values, but this may require the following insn
39 (the one that tests the condition codes) to be modified.
41 The code for the function prologue and epilogue are generated
42 directly in assembler by the target functions function_prologue and
43 function_epilogue. Those instructions never exist as rtl. */
46 #define INCLUDE_ALGORITHM /* reverse */
48 #include "coretypes.h"
57 #include "insn-config.h"
62 #include "tree-pretty-print.h" /* for dump_function_header */
64 #include "insn-attr.h"
65 #include "conditions.h"
69 #include "rtl-error.h"
70 #include "toplev.h" /* exact_log2, floor_log2 */
75 #include "tree-pass.h"
79 #include "stringpool.h"
83 #include "print-rtl.h"
85 #ifdef XCOFF_DEBUGGING_INFO
86 #include "xcoffout.h" /* Needed for external data declarations. */
89 #include "dwarf2out.h"
91 #ifdef DBX_DEBUGGING_INFO
95 /* Most ports that aren't using cc0 don't need to define CC_STATUS_INIT.
96 So define a null default for it to save conditionalization later. */
97 #ifndef CC_STATUS_INIT
98 #define CC_STATUS_INIT
101 /* Is the given character a logical line separator for the assembler? */
102 #ifndef IS_ASM_LOGICAL_LINE_SEPARATOR
103 #define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) ((C) == ';')
106 #ifndef JUMP_TABLES_IN_TEXT_SECTION
107 #define JUMP_TABLES_IN_TEXT_SECTION 0
110 /* Bitflags used by final_scan_insn. */
112 #define SEEN_EMITTED 2
113 #define SEEN_NEXT_VIEW 4
115 /* Last insn processed by final_scan_insn. */
116 static rtx_insn
*debug_insn
;
117 rtx_insn
*current_output_insn
;
119 /* Line number of last NOTE. */
120 static int last_linenum
;
122 /* Column number of last NOTE. */
123 static int last_columnnum
;
125 /* Last discriminator written to assembly. */
126 static int last_discriminator
;
128 /* Discriminator of current block. */
129 static int discriminator
;
131 /* Highest line number in current block. */
132 static int high_block_linenum
;
134 /* Likewise for function. */
135 static int high_function_linenum
;
137 /* Filename of last NOTE. */
138 static const char *last_filename
;
140 /* Override filename, line and column number. */
141 static const char *override_filename
;
142 static int override_linenum
;
143 static int override_columnnum
;
145 /* Whether to force emission of a line note before the next insn. */
146 static bool force_source_line
= false;
148 extern const int length_unit_log
; /* This is defined in insn-attrtab.c. */
150 /* Nonzero while outputting an `asm' with operands.
151 This means that inconsistencies are the user's fault, so don't die.
152 The precise value is the insn being output, to pass to error_for_asm. */
153 const rtx_insn
*this_is_asm_operands
;
155 /* Number of operands of this insn, for an `asm' with operands. */
156 static unsigned int insn_noperands
;
158 /* Compare optimization flag. */
160 static rtx last_ignored_compare
= 0;
162 /* Assign a unique number to each insn that is output.
163 This can be used to generate unique local labels. */
165 static int insn_counter
= 0;
167 /* This variable contains machine-dependent flags (defined in tm.h)
168 set and examined by output routines
169 that describe how to interpret the condition codes properly. */
173 /* During output of an insn, this contains a copy of cc_status
174 from before the insn. */
176 CC_STATUS cc_prev_status
;
178 /* Number of unmatched NOTE_INSN_BLOCK_BEG notes we have seen. */
180 static int block_depth
;
182 /* Nonzero if have enabled APP processing of our assembler output. */
186 /* If we are outputting an insn sequence, this contains the sequence rtx.
189 rtx_sequence
*final_sequence
;
191 #ifdef ASSEMBLER_DIALECT
193 /* Number of the assembler dialect to use, starting at 0. */
194 static int dialect_number
;
197 /* Nonnull if the insn currently being emitted was a COND_EXEC pattern. */
198 rtx current_insn_predicate
;
200 /* True if printing into -fdump-final-insns= dump. */
201 bool final_insns_dump_p
;
203 /* True if profile_function should be called, but hasn't been called yet. */
204 static bool need_profile_function
;
206 static int asm_insn_count (rtx
);
207 static void profile_function (FILE *);
208 static void profile_after_prologue (FILE *);
209 static bool notice_source_line (rtx_insn
*, bool *);
210 static rtx
walk_alter_subreg (rtx
*, bool *);
211 static void output_asm_name (void);
212 static void output_alternate_entry_point (FILE *, rtx_insn
*);
213 static tree
get_mem_expr_from_op (rtx
, int *);
214 static void output_asm_operand_names (rtx
*, int *, int);
215 #ifdef LEAF_REGISTERS
216 static void leaf_renumber_regs (rtx_insn
*);
219 static int alter_cond (rtx
);
221 static int align_fuzz (rtx
, rtx
, int, unsigned);
222 static void collect_fn_hard_reg_usage (void);
223 static tree
get_call_fndecl (rtx_insn
*);
225 /* Initialize data in final at the beginning of a compilation. */
228 init_final (const char *filename ATTRIBUTE_UNUSED
)
233 #ifdef ASSEMBLER_DIALECT
234 dialect_number
= ASSEMBLER_DIALECT
;
238 /* Default target function prologue and epilogue assembler output.
240 If not overridden for epilogue code, then the function body itself
241 contains return instructions wherever needed. */
243 default_function_pro_epilogue (FILE *)
248 default_function_switched_text_sections (FILE *file ATTRIBUTE_UNUSED
,
249 tree decl ATTRIBUTE_UNUSED
,
250 bool new_is_cold ATTRIBUTE_UNUSED
)
254 /* Default target hook that outputs nothing to a stream. */
256 no_asm_to_stream (FILE *file ATTRIBUTE_UNUSED
)
260 /* Enable APP processing of subsequent output.
261 Used before the output from an `asm' statement. */
268 fputs (ASM_APP_ON
, asm_out_file
);
273 /* Disable APP processing of subsequent output.
274 Called from varasm.c before most kinds of output. */
281 fputs (ASM_APP_OFF
, asm_out_file
);
286 /* Return the number of slots filled in the current
287 delayed branch sequence (we don't count the insn needing the
288 delay slot). Zero if not in a delayed branch sequence. */
291 dbr_sequence_length (void)
293 if (final_sequence
!= 0)
294 return XVECLEN (final_sequence
, 0) - 1;
299 /* The next two pages contain routines used to compute the length of an insn
300 and to shorten branches. */
302 /* Arrays for insn lengths, and addresses. The latter is referenced by
303 `insn_current_length'. */
305 static int *insn_lengths
;
307 vec
<int> insn_addresses_
;
309 /* Max uid for which the above arrays are valid. */
310 static int insn_lengths_max_uid
;
312 /* Address of insn being processed. Used by `insn_current_length'. */
313 int insn_current_address
;
315 /* Address of insn being processed in previous iteration. */
316 int insn_last_address
;
318 /* known invariant alignment of insn being processed. */
319 int insn_current_align
;
321 /* After shorten_branches, for any insn, uid_align[INSN_UID (insn)]
322 gives the next following alignment insn that increases the known
323 alignment, or NULL_RTX if there is no such insn.
324 For any alignment obtained this way, we can again index uid_align with
325 its uid to obtain the next following align that in turn increases the
326 alignment, till we reach NULL_RTX; the sequence obtained this way
327 for each insn we'll call the alignment chain of this insn in the following
330 struct label_alignment
336 static rtx
*uid_align
;
337 static int *uid_shuid
;
338 static struct label_alignment
*label_align
;
340 /* Indicate that branch shortening hasn't yet been done. */
343 init_insn_lengths (void)
354 insn_lengths_max_uid
= 0;
356 if (HAVE_ATTR_length
)
357 INSN_ADDRESSES_FREE ();
365 /* Obtain the current length of an insn. If branch shortening has been done,
366 get its actual length. Otherwise, use FALLBACK_FN to calculate the
369 get_attr_length_1 (rtx_insn
*insn
, int (*fallback_fn
) (rtx_insn
*))
375 if (!HAVE_ATTR_length
)
378 if (insn_lengths_max_uid
> INSN_UID (insn
))
379 return insn_lengths
[INSN_UID (insn
)];
381 switch (GET_CODE (insn
))
391 length
= fallback_fn (insn
);
395 body
= PATTERN (insn
);
396 if (GET_CODE (body
) == USE
|| GET_CODE (body
) == CLOBBER
)
399 else if (GET_CODE (body
) == ASM_INPUT
|| asm_noperands (body
) >= 0)
400 length
= asm_insn_count (body
) * fallback_fn (insn
);
401 else if (rtx_sequence
*seq
= dyn_cast
<rtx_sequence
*> (body
))
402 for (i
= 0; i
< seq
->len (); i
++)
403 length
+= get_attr_length_1 (seq
->insn (i
), fallback_fn
);
405 length
= fallback_fn (insn
);
412 #ifdef ADJUST_INSN_LENGTH
413 ADJUST_INSN_LENGTH (insn
, length
);
418 /* Obtain the current length of an insn. If branch shortening has been done,
419 get its actual length. Otherwise, get its maximum length. */
421 get_attr_length (rtx_insn
*insn
)
423 return get_attr_length_1 (insn
, insn_default_length
);
426 /* Obtain the current length of an insn. If branch shortening has been done,
427 get its actual length. Otherwise, get its minimum length. */
429 get_attr_min_length (rtx_insn
*insn
)
431 return get_attr_length_1 (insn
, insn_min_length
);
434 /* Code to handle alignment inside shorten_branches. */
436 /* Here is an explanation how the algorithm in align_fuzz can give
439 Call a sequence of instructions beginning with alignment point X
440 and continuing until the next alignment point `block X'. When `X'
441 is used in an expression, it means the alignment value of the
444 Call the distance between the start of the first insn of block X, and
445 the end of the last insn of block X `IX', for the `inner size of X'.
446 This is clearly the sum of the instruction lengths.
448 Likewise with the next alignment-delimited block following X, which we
451 Call the distance between the start of the first insn of block X, and
452 the start of the first insn of block Y `OX', for the `outer size of X'.
454 The estimated padding is then OX - IX.
456 OX can be safely estimated as
461 OX = round_up(IX, X) + Y - X
463 Clearly est(IX) >= real(IX), because that only depends on the
464 instruction lengths, and those being overestimated is a given.
466 Clearly round_up(foo, Z) >= round_up(bar, Z) if foo >= bar, so
467 we needn't worry about that when thinking about OX.
469 When X >= Y, the alignment provided by Y adds no uncertainty factor
470 for branch ranges starting before X, so we can just round what we have.
471 But when X < Y, we don't know anything about the, so to speak,
472 `middle bits', so we have to assume the worst when aligning up from an
473 address mod X to one mod Y, which is Y - X. */
476 #define LABEL_ALIGN(LABEL) align_labels_log
480 #define LOOP_ALIGN(LABEL) align_loops_log
483 #ifndef LABEL_ALIGN_AFTER_BARRIER
484 #define LABEL_ALIGN_AFTER_BARRIER(LABEL) 0
488 #define JUMP_ALIGN(LABEL) align_jumps_log
492 default_label_align_after_barrier_max_skip (rtx_insn
*insn ATTRIBUTE_UNUSED
)
498 default_loop_align_max_skip (rtx_insn
*insn ATTRIBUTE_UNUSED
)
500 return align_loops_max_skip
;
504 default_label_align_max_skip (rtx_insn
*insn ATTRIBUTE_UNUSED
)
506 return align_labels_max_skip
;
510 default_jump_align_max_skip (rtx_insn
*insn ATTRIBUTE_UNUSED
)
512 return align_jumps_max_skip
;
515 #ifndef ADDR_VEC_ALIGN
517 final_addr_vec_align (rtx_jump_table_data
*addr_vec
)
519 int align
= GET_MODE_SIZE (addr_vec
->get_data_mode ());
521 if (align
> BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
)
522 align
= BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
;
523 return exact_log2 (align
);
527 #define ADDR_VEC_ALIGN(ADDR_VEC) final_addr_vec_align (ADDR_VEC)
530 #ifndef INSN_LENGTH_ALIGNMENT
531 #define INSN_LENGTH_ALIGNMENT(INSN) length_unit_log
534 #define INSN_SHUID(INSN) (uid_shuid[INSN_UID (INSN)])
536 static int min_labelno
, max_labelno
;
538 #define LABEL_TO_ALIGNMENT(LABEL) \
539 (label_align[CODE_LABEL_NUMBER (LABEL) - min_labelno].alignment)
541 #define LABEL_TO_MAX_SKIP(LABEL) \
542 (label_align[CODE_LABEL_NUMBER (LABEL) - min_labelno].max_skip)
544 /* For the benefit of port specific code do this also as a function. */
547 label_to_alignment (rtx label
)
549 if (CODE_LABEL_NUMBER (label
) <= max_labelno
)
550 return LABEL_TO_ALIGNMENT (label
);
555 label_to_max_skip (rtx label
)
557 if (CODE_LABEL_NUMBER (label
) <= max_labelno
)
558 return LABEL_TO_MAX_SKIP (label
);
562 /* The differences in addresses
563 between a branch and its target might grow or shrink depending on
564 the alignment the start insn of the range (the branch for a forward
565 branch or the label for a backward branch) starts out on; if these
566 differences are used naively, they can even oscillate infinitely.
567 We therefore want to compute a 'worst case' address difference that
568 is independent of the alignment the start insn of the range end
569 up on, and that is at least as large as the actual difference.
570 The function align_fuzz calculates the amount we have to add to the
571 naively computed difference, by traversing the part of the alignment
572 chain of the start insn of the range that is in front of the end insn
573 of the range, and considering for each alignment the maximum amount
574 that it might contribute to a size increase.
576 For casesi tables, we also want to know worst case minimum amounts of
577 address difference, in case a machine description wants to introduce
578 some common offset that is added to all offsets in a table.
579 For this purpose, align_fuzz with a growth argument of 0 computes the
580 appropriate adjustment. */
582 /* Compute the maximum delta by which the difference of the addresses of
583 START and END might grow / shrink due to a different address for start
584 which changes the size of alignment insns between START and END.
585 KNOWN_ALIGN_LOG is the alignment known for START.
586 GROWTH should be ~0 if the objective is to compute potential code size
587 increase, and 0 if the objective is to compute potential shrink.
588 The return value is undefined for any other value of GROWTH. */
591 align_fuzz (rtx start
, rtx end
, int known_align_log
, unsigned int growth
)
593 int uid
= INSN_UID (start
);
595 int known_align
= 1 << known_align_log
;
596 int end_shuid
= INSN_SHUID (end
);
599 for (align_label
= uid_align
[uid
]; align_label
; align_label
= uid_align
[uid
])
601 int align_addr
, new_align
;
603 uid
= INSN_UID (align_label
);
604 align_addr
= INSN_ADDRESSES (uid
) - insn_lengths
[uid
];
605 if (uid_shuid
[uid
] > end_shuid
)
607 known_align_log
= LABEL_TO_ALIGNMENT (align_label
);
608 new_align
= 1 << known_align_log
;
609 if (new_align
< known_align
)
611 fuzz
+= (-align_addr
^ growth
) & (new_align
- known_align
);
612 known_align
= new_align
;
617 /* Compute a worst-case reference address of a branch so that it
618 can be safely used in the presence of aligned labels. Since the
619 size of the branch itself is unknown, the size of the branch is
620 not included in the range. I.e. for a forward branch, the reference
621 address is the end address of the branch as known from the previous
622 branch shortening pass, minus a value to account for possible size
623 increase due to alignment. For a backward branch, it is the start
624 address of the branch as known from the current pass, plus a value
625 to account for possible size increase due to alignment.
626 NB.: Therefore, the maximum offset allowed for backward branches needs
627 to exclude the branch size. */
630 insn_current_reference_address (rtx_insn
*branch
)
635 if (! INSN_ADDRESSES_SET_P ())
638 rtx_insn
*seq
= NEXT_INSN (PREV_INSN (branch
));
639 seq_uid
= INSN_UID (seq
);
640 if (!JUMP_P (branch
))
641 /* This can happen for example on the PA; the objective is to know the
642 offset to address something in front of the start of the function.
643 Thus, we can treat it like a backward branch.
644 We assume here that FUNCTION_BOUNDARY / BITS_PER_UNIT is larger than
645 any alignment we'd encounter, so we skip the call to align_fuzz. */
646 return insn_current_address
;
647 dest
= JUMP_LABEL (branch
);
649 /* BRANCH has no proper alignment chain set, so use SEQ.
650 BRANCH also has no INSN_SHUID. */
651 if (INSN_SHUID (seq
) < INSN_SHUID (dest
))
653 /* Forward branch. */
654 return (insn_last_address
+ insn_lengths
[seq_uid
]
655 - align_fuzz (seq
, dest
, length_unit_log
, ~0));
659 /* Backward branch. */
660 return (insn_current_address
661 + align_fuzz (dest
, seq
, length_unit_log
, ~0));
665 /* Compute branch alignments based on CFG profile. */
668 compute_alignments (void)
670 int log
, max_skip
, max_log
;
679 max_labelno
= max_label_num ();
680 min_labelno
= get_first_label_num ();
681 label_align
= XCNEWVEC (struct label_alignment
, max_labelno
- min_labelno
+ 1);
683 /* If not optimizing or optimizing for size, don't assign any alignments. */
684 if (! optimize
|| optimize_function_for_size_p (cfun
))
689 dump_reg_info (dump_file
);
690 dump_flow_info (dump_file
, TDF_DETAILS
);
691 flow_loops_dump (dump_file
, NULL
, 1);
693 loop_optimizer_init (AVOID_CFG_MODIFICATIONS
);
694 profile_count count_threshold
= cfun
->cfg
->count_max
.apply_scale
695 (1, PARAM_VALUE (PARAM_ALIGN_THRESHOLD
));
699 fprintf (dump_file
, "count_max: ");
700 cfun
->cfg
->count_max
.dump (dump_file
);
701 fprintf (dump_file
, "\n");
703 FOR_EACH_BB_FN (bb
, cfun
)
705 rtx_insn
*label
= BB_HEAD (bb
);
706 bool has_fallthru
= 0;
711 || optimize_bb_for_size_p (bb
))
715 "BB %4i loop %2i loop_depth %2i skipped.\n",
717 bb
->loop_father
->num
,
721 max_log
= LABEL_ALIGN (label
);
722 max_skip
= targetm
.asm_out
.label_align_max_skip (label
);
723 profile_count fallthru_count
= profile_count::zero ();
724 profile_count branch_count
= profile_count::zero ();
726 FOR_EACH_EDGE (e
, ei
, bb
->preds
)
728 if (e
->flags
& EDGE_FALLTHRU
)
729 has_fallthru
= 1, fallthru_count
+= e
->count ();
731 branch_count
+= e
->count ();
735 fprintf (dump_file
, "BB %4i loop %2i loop_depth"
737 bb
->index
, bb
->loop_father
->num
,
739 fallthru_count
.dump (dump_file
);
740 fprintf (dump_file
, " branch ");
741 branch_count
.dump (dump_file
);
742 if (!bb
->loop_father
->inner
&& bb
->loop_father
->num
)
743 fprintf (dump_file
, " inner_loop");
744 if (bb
->loop_father
->header
== bb
)
745 fprintf (dump_file
, " loop_header");
746 fprintf (dump_file
, "\n");
748 if (!fallthru_count
.initialized_p () || !branch_count
.initialized_p ())
751 /* There are two purposes to align block with no fallthru incoming edge:
752 1) to avoid fetch stalls when branch destination is near cache boundary
753 2) to improve cache efficiency in case the previous block is not executed
754 (so it does not need to be in the cache).
756 We to catch first case, we align frequently executed blocks.
757 To catch the second, we align blocks that are executed more frequently
758 than the predecessor and the predecessor is likely to not be executed
759 when function is called. */
762 && (branch_count
> count_threshold
763 || (bb
->count
> bb
->prev_bb
->count
.apply_scale (10, 1)
764 && (bb
->prev_bb
->count
765 <= ENTRY_BLOCK_PTR_FOR_FN (cfun
)
766 ->count
.apply_scale (1, 2)))))
768 log
= JUMP_ALIGN (label
);
770 fprintf (dump_file
, " jump alignment added.\n");
774 max_skip
= targetm
.asm_out
.jump_align_max_skip (label
);
777 /* In case block is frequent and reached mostly by non-fallthru edge,
778 align it. It is most likely a first block of loop. */
780 && !(single_succ_p (bb
)
781 && single_succ (bb
) == EXIT_BLOCK_PTR_FOR_FN (cfun
))
782 && optimize_bb_for_speed_p (bb
)
783 && branch_count
+ fallthru_count
> count_threshold
785 > fallthru_count
.apply_scale
786 (PARAM_VALUE (PARAM_ALIGN_LOOP_ITERATIONS
), 1)))
788 log
= LOOP_ALIGN (label
);
790 fprintf (dump_file
, " internal loop alignment added.\n");
794 max_skip
= targetm
.asm_out
.loop_align_max_skip (label
);
797 LABEL_TO_ALIGNMENT (label
) = max_log
;
798 LABEL_TO_MAX_SKIP (label
) = max_skip
;
801 loop_optimizer_finalize ();
802 free_dominance_info (CDI_DOMINATORS
);
806 /* Grow the LABEL_ALIGN array after new labels are created. */
809 grow_label_align (void)
811 int old
= max_labelno
;
815 max_labelno
= max_label_num ();
817 n_labels
= max_labelno
- min_labelno
+ 1;
818 n_old_labels
= old
- min_labelno
+ 1;
820 label_align
= XRESIZEVEC (struct label_alignment
, label_align
, n_labels
);
822 /* Range of labels grows monotonically in the function. Failing here
823 means that the initialization of array got lost. */
824 gcc_assert (n_old_labels
<= n_labels
);
826 memset (label_align
+ n_old_labels
, 0,
827 (n_labels
- n_old_labels
) * sizeof (struct label_alignment
));
830 /* Update the already computed alignment information. LABEL_PAIRS is a vector
831 made up of pairs of labels for which the alignment information of the first
832 element will be copied from that of the second element. */
835 update_alignments (vec
<rtx
> &label_pairs
)
838 rtx iter
, label
= NULL_RTX
;
840 if (max_labelno
!= max_label_num ())
843 FOR_EACH_VEC_ELT (label_pairs
, i
, iter
)
846 LABEL_TO_ALIGNMENT (label
) = LABEL_TO_ALIGNMENT (iter
);
847 LABEL_TO_MAX_SKIP (label
) = LABEL_TO_MAX_SKIP (iter
);
855 const pass_data pass_data_compute_alignments
=
858 "alignments", /* name */
859 OPTGROUP_NONE
, /* optinfo_flags */
861 0, /* properties_required */
862 0, /* properties_provided */
863 0, /* properties_destroyed */
864 0, /* todo_flags_start */
865 0, /* todo_flags_finish */
868 class pass_compute_alignments
: public rtl_opt_pass
871 pass_compute_alignments (gcc::context
*ctxt
)
872 : rtl_opt_pass (pass_data_compute_alignments
, ctxt
)
875 /* opt_pass methods: */
876 virtual unsigned int execute (function
*) { return compute_alignments (); }
878 }; // class pass_compute_alignments
883 make_pass_compute_alignments (gcc::context
*ctxt
)
885 return new pass_compute_alignments (ctxt
);
889 /* Make a pass over all insns and compute their actual lengths by shortening
890 any branches of variable length if possible. */
892 /* shorten_branches might be called multiple times: for example, the SH
893 port splits out-of-range conditional branches in MACHINE_DEPENDENT_REORG.
894 In order to do this, it needs proper length information, which it obtains
895 by calling shorten_branches. This cannot be collapsed with
896 shorten_branches itself into a single pass unless we also want to integrate
897 reorg.c, since the branch splitting exposes new instructions with delay
901 shorten_branches (rtx_insn
*first
)
908 #define MAX_CODE_ALIGN 16
910 int something_changed
= 1;
911 char *varying_length
;
914 rtx align_tab
[MAX_CODE_ALIGN
];
916 /* Compute maximum UID and allocate label_align / uid_shuid. */
917 max_uid
= get_max_uid ();
919 /* Free uid_shuid before reallocating it. */
922 uid_shuid
= XNEWVEC (int, max_uid
);
924 if (max_labelno
!= max_label_num ())
927 /* Initialize label_align and set up uid_shuid to be strictly
928 monotonically rising with insn order. */
929 /* We use max_log here to keep track of the maximum alignment we want to
930 impose on the next CODE_LABEL (or the current one if we are processing
931 the CODE_LABEL itself). */
936 for (insn
= get_insns (), i
= 1; insn
; insn
= NEXT_INSN (insn
))
940 INSN_SHUID (insn
) = i
++;
944 if (rtx_code_label
*label
= dyn_cast
<rtx_code_label
*> (insn
))
946 /* Merge in alignments computed by compute_alignments. */
947 log
= LABEL_TO_ALIGNMENT (label
);
951 max_skip
= LABEL_TO_MAX_SKIP (label
);
954 rtx_jump_table_data
*table
= jump_table_for_label (label
);
957 log
= LABEL_ALIGN (label
);
961 max_skip
= targetm
.asm_out
.label_align_max_skip (label
);
964 /* ADDR_VECs only take room if read-only data goes into the text
966 if ((JUMP_TABLES_IN_TEXT_SECTION
967 || readonly_data_section
== text_section
)
970 log
= ADDR_VEC_ALIGN (table
);
974 max_skip
= targetm
.asm_out
.label_align_max_skip (label
);
977 LABEL_TO_ALIGNMENT (label
) = max_log
;
978 LABEL_TO_MAX_SKIP (label
) = max_skip
;
982 else if (BARRIER_P (insn
))
986 for (label
= insn
; label
&& ! INSN_P (label
);
987 label
= NEXT_INSN (label
))
990 log
= LABEL_ALIGN_AFTER_BARRIER (insn
);
994 max_skip
= targetm
.asm_out
.label_align_after_barrier_max_skip (label
);
1000 if (!HAVE_ATTR_length
)
1003 /* Allocate the rest of the arrays. */
1004 insn_lengths
= XNEWVEC (int, max_uid
);
1005 insn_lengths_max_uid
= max_uid
;
1006 /* Syntax errors can lead to labels being outside of the main insn stream.
1007 Initialize insn_addresses, so that we get reproducible results. */
1008 INSN_ADDRESSES_ALLOC (max_uid
);
1010 varying_length
= XCNEWVEC (char, max_uid
);
1012 /* Initialize uid_align. We scan instructions
1013 from end to start, and keep in align_tab[n] the last seen insn
1014 that does an alignment of at least n+1, i.e. the successor
1015 in the alignment chain for an insn that does / has a known
1017 uid_align
= XCNEWVEC (rtx
, max_uid
);
1019 for (i
= MAX_CODE_ALIGN
; --i
>= 0;)
1020 align_tab
[i
] = NULL_RTX
;
1021 seq
= get_last_insn ();
1022 for (; seq
; seq
= PREV_INSN (seq
))
1024 int uid
= INSN_UID (seq
);
1026 log
= (LABEL_P (seq
) ? LABEL_TO_ALIGNMENT (seq
) : 0);
1027 uid_align
[uid
] = align_tab
[0];
1030 /* Found an alignment label. */
1031 uid_align
[uid
] = align_tab
[log
];
1032 for (i
= log
- 1; i
>= 0; i
--)
1037 /* When optimizing, we start assuming minimum length, and keep increasing
1038 lengths as we find the need for this, till nothing changes.
1039 When not optimizing, we start assuming maximum lengths, and
1040 do a single pass to update the lengths. */
1041 bool increasing
= optimize
!= 0;
1043 #ifdef CASE_VECTOR_SHORTEN_MODE
1046 /* Look for ADDR_DIFF_VECs, and initialize their minimum and maximum
1049 int min_shuid
= INSN_SHUID (get_insns ()) - 1;
1050 int max_shuid
= INSN_SHUID (get_last_insn ()) + 1;
1053 for (insn
= first
; insn
!= 0; insn
= NEXT_INSN (insn
))
1055 rtx min_lab
= NULL_RTX
, max_lab
= NULL_RTX
, pat
;
1056 int len
, i
, min
, max
, insn_shuid
;
1058 addr_diff_vec_flags flags
;
1060 if (! JUMP_TABLE_DATA_P (insn
)
1061 || GET_CODE (PATTERN (insn
)) != ADDR_DIFF_VEC
)
1063 pat
= PATTERN (insn
);
1064 len
= XVECLEN (pat
, 1);
1065 gcc_assert (len
> 0);
1066 min_align
= MAX_CODE_ALIGN
;
1067 for (min
= max_shuid
, max
= min_shuid
, i
= len
- 1; i
>= 0; i
--)
1069 rtx lab
= XEXP (XVECEXP (pat
, 1, i
), 0);
1070 int shuid
= INSN_SHUID (lab
);
1081 if (min_align
> LABEL_TO_ALIGNMENT (lab
))
1082 min_align
= LABEL_TO_ALIGNMENT (lab
);
1084 XEXP (pat
, 2) = gen_rtx_LABEL_REF (Pmode
, min_lab
);
1085 XEXP (pat
, 3) = gen_rtx_LABEL_REF (Pmode
, max_lab
);
1086 insn_shuid
= INSN_SHUID (insn
);
1087 rel
= INSN_SHUID (XEXP (XEXP (pat
, 0), 0));
1088 memset (&flags
, 0, sizeof (flags
));
1089 flags
.min_align
= min_align
;
1090 flags
.base_after_vec
= rel
> insn_shuid
;
1091 flags
.min_after_vec
= min
> insn_shuid
;
1092 flags
.max_after_vec
= max
> insn_shuid
;
1093 flags
.min_after_base
= min
> rel
;
1094 flags
.max_after_base
= max
> rel
;
1095 ADDR_DIFF_VEC_FLAGS (pat
) = flags
;
1098 PUT_MODE (pat
, CASE_VECTOR_SHORTEN_MODE (0, 0, pat
));
1101 #endif /* CASE_VECTOR_SHORTEN_MODE */
1103 /* Compute initial lengths, addresses, and varying flags for each insn. */
1104 int (*length_fun
) (rtx_insn
*) = increasing
? insn_min_length
: insn_default_length
;
1106 for (insn_current_address
= 0, insn
= first
;
1108 insn_current_address
+= insn_lengths
[uid
], insn
= NEXT_INSN (insn
))
1110 uid
= INSN_UID (insn
);
1112 insn_lengths
[uid
] = 0;
1116 int log
= LABEL_TO_ALIGNMENT (insn
);
1119 int align
= 1 << log
;
1120 int new_address
= (insn_current_address
+ align
- 1) & -align
;
1121 insn_lengths
[uid
] = new_address
- insn_current_address
;
1125 INSN_ADDRESSES (uid
) = insn_current_address
+ insn_lengths
[uid
];
1127 if (NOTE_P (insn
) || BARRIER_P (insn
)
1128 || LABEL_P (insn
) || DEBUG_INSN_P (insn
))
1130 if (insn
->deleted ())
1133 body
= PATTERN (insn
);
1134 if (rtx_jump_table_data
*table
= dyn_cast
<rtx_jump_table_data
*> (insn
))
1136 /* This only takes room if read-only data goes into the text
1138 if (JUMP_TABLES_IN_TEXT_SECTION
1139 || readonly_data_section
== text_section
)
1140 insn_lengths
[uid
] = (XVECLEN (body
,
1141 GET_CODE (body
) == ADDR_DIFF_VEC
)
1142 * GET_MODE_SIZE (table
->get_data_mode ()));
1143 /* Alignment is handled by ADDR_VEC_ALIGN. */
1145 else if (GET_CODE (body
) == ASM_INPUT
|| asm_noperands (body
) >= 0)
1146 insn_lengths
[uid
] = asm_insn_count (body
) * insn_default_length (insn
);
1147 else if (rtx_sequence
*body_seq
= dyn_cast
<rtx_sequence
*> (body
))
1150 int const_delay_slots
;
1152 const_delay_slots
= const_num_delay_slots (body_seq
->insn (0));
1154 const_delay_slots
= 0;
1156 int (*inner_length_fun
) (rtx_insn
*)
1157 = const_delay_slots
? length_fun
: insn_default_length
;
1158 /* Inside a delay slot sequence, we do not do any branch shortening
1159 if the shortening could change the number of delay slots
1161 for (i
= 0; i
< body_seq
->len (); i
++)
1163 rtx_insn
*inner_insn
= body_seq
->insn (i
);
1164 int inner_uid
= INSN_UID (inner_insn
);
1167 if (GET_CODE (PATTERN (inner_insn
)) == ASM_INPUT
1168 || asm_noperands (PATTERN (inner_insn
)) >= 0)
1169 inner_length
= (asm_insn_count (PATTERN (inner_insn
))
1170 * insn_default_length (inner_insn
));
1172 inner_length
= inner_length_fun (inner_insn
);
1174 insn_lengths
[inner_uid
] = inner_length
;
1175 if (const_delay_slots
)
1177 if ((varying_length
[inner_uid
]
1178 = insn_variable_length_p (inner_insn
)) != 0)
1179 varying_length
[uid
] = 1;
1180 INSN_ADDRESSES (inner_uid
) = (insn_current_address
1181 + insn_lengths
[uid
]);
1184 varying_length
[inner_uid
] = 0;
1185 insn_lengths
[uid
] += inner_length
;
1188 else if (GET_CODE (body
) != USE
&& GET_CODE (body
) != CLOBBER
)
1190 insn_lengths
[uid
] = length_fun (insn
);
1191 varying_length
[uid
] = insn_variable_length_p (insn
);
1194 /* If needed, do any adjustment. */
1195 #ifdef ADJUST_INSN_LENGTH
1196 ADJUST_INSN_LENGTH (insn
, insn_lengths
[uid
]);
1197 if (insn_lengths
[uid
] < 0)
1198 fatal_insn ("negative insn length", insn
);
1202 /* Now loop over all the insns finding varying length insns. For each,
1203 get the current insn length. If it has changed, reflect the change.
1204 When nothing changes for a full pass, we are done. */
1206 while (something_changed
)
1208 something_changed
= 0;
1209 insn_current_align
= MAX_CODE_ALIGN
- 1;
1210 for (insn_current_address
= 0, insn
= first
;
1212 insn
= NEXT_INSN (insn
))
1215 #ifdef ADJUST_INSN_LENGTH
1220 uid
= INSN_UID (insn
);
1222 if (rtx_code_label
*label
= dyn_cast
<rtx_code_label
*> (insn
))
1224 int log
= LABEL_TO_ALIGNMENT (label
);
1226 #ifdef CASE_VECTOR_SHORTEN_MODE
1227 /* If the mode of a following jump table was changed, we
1228 may need to update the alignment of this label. */
1230 if (JUMP_TABLES_IN_TEXT_SECTION
1231 || readonly_data_section
== text_section
)
1233 rtx_jump_table_data
*table
= jump_table_for_label (label
);
1236 int newlog
= ADDR_VEC_ALIGN (table
);
1240 LABEL_TO_ALIGNMENT (insn
) = log
;
1241 something_changed
= 1;
1247 if (log
> insn_current_align
)
1249 int align
= 1 << log
;
1250 int new_address
= (insn_current_address
+ align
- 1) & -align
;
1251 insn_lengths
[uid
] = new_address
- insn_current_address
;
1252 insn_current_align
= log
;
1253 insn_current_address
= new_address
;
1256 insn_lengths
[uid
] = 0;
1257 INSN_ADDRESSES (uid
) = insn_current_address
;
1261 length_align
= INSN_LENGTH_ALIGNMENT (insn
);
1262 if (length_align
< insn_current_align
)
1263 insn_current_align
= length_align
;
1265 insn_last_address
= INSN_ADDRESSES (uid
);
1266 INSN_ADDRESSES (uid
) = insn_current_address
;
1268 #ifdef CASE_VECTOR_SHORTEN_MODE
1270 && JUMP_TABLE_DATA_P (insn
)
1271 && GET_CODE (PATTERN (insn
)) == ADDR_DIFF_VEC
)
1273 rtx_jump_table_data
*table
= as_a
<rtx_jump_table_data
*> (insn
);
1274 rtx body
= PATTERN (insn
);
1275 int old_length
= insn_lengths
[uid
];
1277 safe_as_a
<rtx_insn
*> (XEXP (XEXP (body
, 0), 0));
1278 rtx min_lab
= XEXP (XEXP (body
, 2), 0);
1279 rtx max_lab
= XEXP (XEXP (body
, 3), 0);
1280 int rel_addr
= INSN_ADDRESSES (INSN_UID (rel_lab
));
1281 int min_addr
= INSN_ADDRESSES (INSN_UID (min_lab
));
1282 int max_addr
= INSN_ADDRESSES (INSN_UID (max_lab
));
1285 addr_diff_vec_flags flags
;
1286 scalar_int_mode vec_mode
;
1288 /* Avoid automatic aggregate initialization. */
1289 flags
= ADDR_DIFF_VEC_FLAGS (body
);
1291 /* Try to find a known alignment for rel_lab. */
1292 for (prev
= rel_lab
;
1294 && ! insn_lengths
[INSN_UID (prev
)]
1295 && ! (varying_length
[INSN_UID (prev
)] & 1);
1296 prev
= PREV_INSN (prev
))
1297 if (varying_length
[INSN_UID (prev
)] & 2)
1299 rel_align
= LABEL_TO_ALIGNMENT (prev
);
1303 /* See the comment on addr_diff_vec_flags in rtl.h for the
1304 meaning of the flags values. base: REL_LAB vec: INSN */
1305 /* Anything after INSN has still addresses from the last
1306 pass; adjust these so that they reflect our current
1307 estimate for this pass. */
1308 if (flags
.base_after_vec
)
1309 rel_addr
+= insn_current_address
- insn_last_address
;
1310 if (flags
.min_after_vec
)
1311 min_addr
+= insn_current_address
- insn_last_address
;
1312 if (flags
.max_after_vec
)
1313 max_addr
+= insn_current_address
- insn_last_address
;
1314 /* We want to know the worst case, i.e. lowest possible value
1315 for the offset of MIN_LAB. If MIN_LAB is after REL_LAB,
1316 its offset is positive, and we have to be wary of code shrink;
1317 otherwise, it is negative, and we have to be vary of code
1319 if (flags
.min_after_base
)
1321 /* If INSN is between REL_LAB and MIN_LAB, the size
1322 changes we are about to make can change the alignment
1323 within the observed offset, therefore we have to break
1324 it up into two parts that are independent. */
1325 if (! flags
.base_after_vec
&& flags
.min_after_vec
)
1327 min_addr
-= align_fuzz (rel_lab
, insn
, rel_align
, 0);
1328 min_addr
-= align_fuzz (insn
, min_lab
, 0, 0);
1331 min_addr
-= align_fuzz (rel_lab
, min_lab
, rel_align
, 0);
1335 if (flags
.base_after_vec
&& ! flags
.min_after_vec
)
1337 min_addr
-= align_fuzz (min_lab
, insn
, 0, ~0);
1338 min_addr
-= align_fuzz (insn
, rel_lab
, 0, ~0);
1341 min_addr
-= align_fuzz (min_lab
, rel_lab
, 0, ~0);
1343 /* Likewise, determine the highest lowest possible value
1344 for the offset of MAX_LAB. */
1345 if (flags
.max_after_base
)
1347 if (! flags
.base_after_vec
&& flags
.max_after_vec
)
1349 max_addr
+= align_fuzz (rel_lab
, insn
, rel_align
, ~0);
1350 max_addr
+= align_fuzz (insn
, max_lab
, 0, ~0);
1353 max_addr
+= align_fuzz (rel_lab
, max_lab
, rel_align
, ~0);
1357 if (flags
.base_after_vec
&& ! flags
.max_after_vec
)
1359 max_addr
+= align_fuzz (max_lab
, insn
, 0, 0);
1360 max_addr
+= align_fuzz (insn
, rel_lab
, 0, 0);
1363 max_addr
+= align_fuzz (max_lab
, rel_lab
, 0, 0);
1365 vec_mode
= CASE_VECTOR_SHORTEN_MODE (min_addr
- rel_addr
,
1366 max_addr
- rel_addr
, body
);
1368 || (GET_MODE_SIZE (vec_mode
)
1369 >= GET_MODE_SIZE (table
->get_data_mode ())))
1370 PUT_MODE (body
, vec_mode
);
1371 if (JUMP_TABLES_IN_TEXT_SECTION
1372 || readonly_data_section
== text_section
)
1375 = (XVECLEN (body
, 1)
1376 * GET_MODE_SIZE (table
->get_data_mode ()));
1377 insn_current_address
+= insn_lengths
[uid
];
1378 if (insn_lengths
[uid
] != old_length
)
1379 something_changed
= 1;
1384 #endif /* CASE_VECTOR_SHORTEN_MODE */
1386 if (! (varying_length
[uid
]))
1388 if (NONJUMP_INSN_P (insn
)
1389 && GET_CODE (PATTERN (insn
)) == SEQUENCE
)
1393 body
= PATTERN (insn
);
1394 for (i
= 0; i
< XVECLEN (body
, 0); i
++)
1396 rtx inner_insn
= XVECEXP (body
, 0, i
);
1397 int inner_uid
= INSN_UID (inner_insn
);
1399 INSN_ADDRESSES (inner_uid
) = insn_current_address
;
1401 insn_current_address
+= insn_lengths
[inner_uid
];
1405 insn_current_address
+= insn_lengths
[uid
];
1410 if (NONJUMP_INSN_P (insn
) && GET_CODE (PATTERN (insn
)) == SEQUENCE
)
1412 rtx_sequence
*seqn
= as_a
<rtx_sequence
*> (PATTERN (insn
));
1415 body
= PATTERN (insn
);
1417 for (i
= 0; i
< seqn
->len (); i
++)
1419 rtx_insn
*inner_insn
= seqn
->insn (i
);
1420 int inner_uid
= INSN_UID (inner_insn
);
1423 INSN_ADDRESSES (inner_uid
) = insn_current_address
;
1425 /* insn_current_length returns 0 for insns with a
1426 non-varying length. */
1427 if (! varying_length
[inner_uid
])
1428 inner_length
= insn_lengths
[inner_uid
];
1430 inner_length
= insn_current_length (inner_insn
);
1432 if (inner_length
!= insn_lengths
[inner_uid
])
1434 if (!increasing
|| inner_length
> insn_lengths
[inner_uid
])
1436 insn_lengths
[inner_uid
] = inner_length
;
1437 something_changed
= 1;
1440 inner_length
= insn_lengths
[inner_uid
];
1442 insn_current_address
+= inner_length
;
1443 new_length
+= inner_length
;
1448 new_length
= insn_current_length (insn
);
1449 insn_current_address
+= new_length
;
1452 #ifdef ADJUST_INSN_LENGTH
1453 /* If needed, do any adjustment. */
1454 tmp_length
= new_length
;
1455 ADJUST_INSN_LENGTH (insn
, new_length
);
1456 insn_current_address
+= (new_length
- tmp_length
);
1459 if (new_length
!= insn_lengths
[uid
]
1460 && (!increasing
|| new_length
> insn_lengths
[uid
]))
1462 insn_lengths
[uid
] = new_length
;
1463 something_changed
= 1;
1466 insn_current_address
+= insn_lengths
[uid
] - new_length
;
1468 /* For a non-optimizing compile, do only a single pass. */
1472 crtl
->max_insn_address
= insn_current_address
;
1473 free (varying_length
);
1476 /* Given the body of an INSN known to be generated by an ASM statement, return
1477 the number of machine instructions likely to be generated for this insn.
1478 This is used to compute its length. */
1481 asm_insn_count (rtx body
)
1485 if (GET_CODE (body
) == ASM_INPUT
)
1486 templ
= XSTR (body
, 0);
1488 templ
= decode_asm_operands (body
, NULL
, NULL
, NULL
, NULL
, NULL
);
1490 return asm_str_count (templ
);
1493 /* Return the number of machine instructions likely to be generated for the
1494 inline-asm template. */
1496 asm_str_count (const char *templ
)
1503 for (; *templ
; templ
++)
1504 if (IS_ASM_LOGICAL_LINE_SEPARATOR (*templ
, templ
)
1511 /* Return true if DWARF2 debug info can be emitted for DECL. */
1514 dwarf2_debug_info_emitted_p (tree decl
)
1516 if (write_symbols
!= DWARF2_DEBUG
&& write_symbols
!= VMS_AND_DWARF2_DEBUG
)
1519 if (DECL_IGNORED_P (decl
))
1525 /* Return scope resulting from combination of S1 and S2. */
1527 choose_inner_scope (tree s1
, tree s2
)
1533 if (BLOCK_NUMBER (s1
) > BLOCK_NUMBER (s2
))
1538 /* Emit lexical block notes needed to change scope from S1 to S2. */
1541 change_scope (rtx_insn
*orig_insn
, tree s1
, tree s2
)
1543 rtx_insn
*insn
= orig_insn
;
1544 tree com
= NULL_TREE
;
1545 tree ts1
= s1
, ts2
= s2
;
1550 gcc_assert (ts1
&& ts2
);
1551 if (BLOCK_NUMBER (ts1
) > BLOCK_NUMBER (ts2
))
1552 ts1
= BLOCK_SUPERCONTEXT (ts1
);
1553 else if (BLOCK_NUMBER (ts1
) < BLOCK_NUMBER (ts2
))
1554 ts2
= BLOCK_SUPERCONTEXT (ts2
);
1557 ts1
= BLOCK_SUPERCONTEXT (ts1
);
1558 ts2
= BLOCK_SUPERCONTEXT (ts2
);
1567 rtx_note
*note
= emit_note_before (NOTE_INSN_BLOCK_END
, insn
);
1568 NOTE_BLOCK (note
) = s
;
1569 s
= BLOCK_SUPERCONTEXT (s
);
1576 insn
= emit_note_before (NOTE_INSN_BLOCK_BEG
, insn
);
1577 NOTE_BLOCK (insn
) = s
;
1578 s
= BLOCK_SUPERCONTEXT (s
);
1582 /* Rebuild all the NOTE_INSN_BLOCK_BEG and NOTE_INSN_BLOCK_END notes based
1583 on the scope tree and the newly reordered instructions. */
1586 reemit_insn_block_notes (void)
1588 tree cur_block
= DECL_INITIAL (cfun
->decl
);
1591 insn
= get_insns ();
1592 for (; insn
; insn
= NEXT_INSN (insn
))
1596 /* Prevent lexical blocks from straddling section boundaries. */
1598 switch (NOTE_KIND (insn
))
1600 case NOTE_INSN_SWITCH_TEXT_SECTIONS
:
1602 for (tree s
= cur_block
; s
!= DECL_INITIAL (cfun
->decl
);
1603 s
= BLOCK_SUPERCONTEXT (s
))
1605 rtx_note
*note
= emit_note_before (NOTE_INSN_BLOCK_END
, insn
);
1606 NOTE_BLOCK (note
) = s
;
1607 note
= emit_note_after (NOTE_INSN_BLOCK_BEG
, insn
);
1608 NOTE_BLOCK (note
) = s
;
1613 case NOTE_INSN_BEGIN_STMT
:
1614 case NOTE_INSN_INLINE_ENTRY
:
1615 this_block
= LOCATION_BLOCK (NOTE_MARKER_LOCATION (insn
));
1616 goto set_cur_block_to_this_block
;
1622 if (!active_insn_p (insn
))
1625 /* Avoid putting scope notes between jump table and its label. */
1626 if (JUMP_TABLE_DATA_P (insn
))
1629 this_block
= insn_scope (insn
);
1630 /* For sequences compute scope resulting from merging all scopes
1631 of instructions nested inside. */
1632 if (rtx_sequence
*body
= dyn_cast
<rtx_sequence
*> (PATTERN (insn
)))
1637 for (i
= 0; i
< body
->len (); i
++)
1638 this_block
= choose_inner_scope (this_block
,
1639 insn_scope (body
->insn (i
)));
1641 set_cur_block_to_this_block
:
1644 if (INSN_LOCATION (insn
) == UNKNOWN_LOCATION
)
1647 this_block
= DECL_INITIAL (cfun
->decl
);
1650 if (this_block
!= cur_block
)
1652 change_scope (insn
, cur_block
, this_block
);
1653 cur_block
= this_block
;
1657 /* change_scope emits before the insn, not after. */
1658 rtx_note
*note
= emit_note (NOTE_INSN_DELETED
);
1659 change_scope (note
, cur_block
, DECL_INITIAL (cfun
->decl
));
1665 static const char *some_local_dynamic_name
;
1667 /* Locate some local-dynamic symbol still in use by this function
1668 so that we can print its name in local-dynamic base patterns.
1669 Return null if there are no local-dynamic references. */
1672 get_some_local_dynamic_name ()
1674 subrtx_iterator::array_type array
;
1677 if (some_local_dynamic_name
)
1678 return some_local_dynamic_name
;
1680 for (insn
= get_insns (); insn
; insn
= NEXT_INSN (insn
))
1681 if (NONDEBUG_INSN_P (insn
))
1682 FOR_EACH_SUBRTX (iter
, array
, PATTERN (insn
), ALL
)
1684 const_rtx x
= *iter
;
1685 if (GET_CODE (x
) == SYMBOL_REF
)
1687 if (SYMBOL_REF_TLS_MODEL (x
) == TLS_MODEL_LOCAL_DYNAMIC
)
1688 return some_local_dynamic_name
= XSTR (x
, 0);
1689 if (CONSTANT_POOL_ADDRESS_P (x
))
1690 iter
.substitute (get_pool_constant (x
));
1697 /* Arrange for us to emit a source location note before any further
1698 real insns or section changes, by setting the SEEN_NEXT_VIEW bit in
1699 *SEEN, as long as we are keeping track of location views. The bit
1700 indicates we have referenced the next view at the current PC, so we
1701 have to emit it. This should be called next to the var_location
1705 set_next_view_needed (int *seen
)
1707 if (debug_variable_location_views
)
1708 *seen
|= SEEN_NEXT_VIEW
;
1711 /* Clear the flag in *SEEN indicating we need to emit the next view.
1712 This should be called next to the source_line debug hook. */
1715 clear_next_view_needed (int *seen
)
1717 *seen
&= ~SEEN_NEXT_VIEW
;
1720 /* Test whether we have a pending request to emit the next view in
1721 *SEEN, and emit it if needed, clearing the request bit. */
1724 maybe_output_next_view (int *seen
)
1726 if ((*seen
& SEEN_NEXT_VIEW
) != 0)
1728 clear_next_view_needed (seen
);
1729 (*debug_hooks
->source_line
) (last_linenum
, last_columnnum
,
1730 last_filename
, last_discriminator
,
1735 /* We want to emit param bindings (before the first begin_stmt) in the
1736 initial view, if we are emitting views. To that end, we may
1737 consume initial notes in the function, processing them in
1738 final_start_function, before signaling the beginning of the
1739 prologue, rather than in final.
1741 We don't test whether the DECLs are PARM_DECLs: the assumption is
1742 that there will be a NOTE_INSN_BEGIN_STMT marker before any
1743 non-parameter NOTE_INSN_VAR_LOCATION. It's ok if the marker is not
1744 there, we'll just have more variable locations bound in the initial
1745 view, which is consistent with their being bound without any code
1746 that would give them a value. */
1749 in_initial_view_p (rtx_insn
*insn
)
1751 return (!DECL_IGNORED_P (current_function_decl
)
1752 && debug_variable_location_views
1753 && insn
&& GET_CODE (insn
) == NOTE
1754 && (NOTE_KIND (insn
) == NOTE_INSN_VAR_LOCATION
1755 || NOTE_KIND (insn
) == NOTE_INSN_DELETED
));
1758 /* Output assembler code for the start of a function,
1759 and initialize some of the variables in this file
1760 for the new function. The label for the function and associated
1761 assembler pseudo-ops have already been output in `assemble_start_function'.
1763 FIRST is the first insn of the rtl for the function being compiled.
1764 FILE is the file to write assembler code to.
1765 SEEN should be initially set to zero, and it may be updated to
1766 indicate we have references to the next location view, that would
1767 require us to emit it at the current PC.
1768 OPTIMIZE_P is nonzero if we should eliminate redundant
1769 test and compare insns. */
1772 final_start_function_1 (rtx_insn
**firstp
, FILE *file
, int *seen
,
1773 int optimize_p ATTRIBUTE_UNUSED
)
1777 this_is_asm_operands
= 0;
1779 need_profile_function
= false;
1781 last_filename
= LOCATION_FILE (prologue_location
);
1782 last_linenum
= LOCATION_LINE (prologue_location
);
1783 last_columnnum
= LOCATION_COLUMN (prologue_location
);
1784 last_discriminator
= discriminator
= 0;
1786 high_block_linenum
= high_function_linenum
= last_linenum
;
1788 if (flag_sanitize
& SANITIZE_ADDRESS
)
1789 asan_function_start ();
1791 rtx_insn
*first
= *firstp
;
1792 if (in_initial_view_p (first
))
1796 final_scan_insn (first
, file
, 0, 0, seen
);
1797 first
= NEXT_INSN (first
);
1799 while (in_initial_view_p (first
));
1803 if (!DECL_IGNORED_P (current_function_decl
))
1804 debug_hooks
->begin_prologue (last_linenum
, last_columnnum
,
1807 if (!dwarf2_debug_info_emitted_p (current_function_decl
))
1808 dwarf2out_begin_prologue (0, 0, NULL
);
1810 #ifdef LEAF_REG_REMAP
1811 if (crtl
->uses_only_leaf_regs
)
1812 leaf_renumber_regs (first
);
1815 /* The Sun386i and perhaps other machines don't work right
1816 if the profiling code comes after the prologue. */
1817 if (targetm
.profile_before_prologue () && crtl
->profile
)
1819 if (targetm
.asm_out
.function_prologue
== default_function_pro_epilogue
1820 && targetm
.have_prologue ())
1823 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
1829 else if (NOTE_KIND (insn
) == NOTE_INSN_BASIC_BLOCK
1830 || NOTE_KIND (insn
) == NOTE_INSN_FUNCTION_BEG
)
1832 else if (NOTE_KIND (insn
) == NOTE_INSN_DELETED
1833 || NOTE_KIND (insn
) == NOTE_INSN_VAR_LOCATION
)
1842 need_profile_function
= true;
1844 profile_function (file
);
1847 profile_function (file
);
1850 /* If debugging, assign block numbers to all of the blocks in this
1854 reemit_insn_block_notes ();
1855 number_blocks (current_function_decl
);
1856 /* We never actually put out begin/end notes for the top-level
1857 block in the function. But, conceptually, that block is
1859 TREE_ASM_WRITTEN (DECL_INITIAL (current_function_decl
)) = 1;
1862 HOST_WIDE_INT min_frame_size
= constant_lower_bound (get_frame_size ());
1863 if (warn_frame_larger_than
1864 && min_frame_size
> frame_larger_than_size
)
1866 /* Issue a warning */
1867 warning (OPT_Wframe_larger_than_
,
1868 "the frame size of %wd bytes is larger than %wd bytes",
1869 min_frame_size
, frame_larger_than_size
);
1872 /* First output the function prologue: code to set up the stack frame. */
1873 targetm
.asm_out
.function_prologue (file
);
1875 /* If the machine represents the prologue as RTL, the profiling code must
1876 be emitted when NOTE_INSN_PROLOGUE_END is scanned. */
1877 if (! targetm
.have_prologue ())
1878 profile_after_prologue (file
);
1881 /* This is an exported final_start_function_1, callable without SEEN. */
1884 final_start_function (rtx_insn
*first
, FILE *file
,
1885 int optimize_p ATTRIBUTE_UNUSED
)
1888 final_start_function_1 (&first
, file
, &seen
, optimize_p
);
1889 gcc_assert (seen
== 0);
1893 profile_after_prologue (FILE *file ATTRIBUTE_UNUSED
)
1895 if (!targetm
.profile_before_prologue () && crtl
->profile
)
1896 profile_function (file
);
1900 profile_function (FILE *file ATTRIBUTE_UNUSED
)
1902 #ifndef NO_PROFILE_COUNTERS
1903 # define NO_PROFILE_COUNTERS 0
1905 #ifdef ASM_OUTPUT_REG_PUSH
1906 rtx sval
= NULL
, chain
= NULL
;
1908 if (cfun
->returns_struct
)
1909 sval
= targetm
.calls
.struct_value_rtx (TREE_TYPE (current_function_decl
),
1911 if (cfun
->static_chain_decl
)
1912 chain
= targetm
.calls
.static_chain (current_function_decl
, true);
1913 #endif /* ASM_OUTPUT_REG_PUSH */
1915 if (! NO_PROFILE_COUNTERS
)
1917 int align
= MIN (BIGGEST_ALIGNMENT
, LONG_TYPE_SIZE
);
1918 switch_to_section (data_section
);
1919 ASM_OUTPUT_ALIGN (file
, floor_log2 (align
/ BITS_PER_UNIT
));
1920 targetm
.asm_out
.internal_label (file
, "LP", current_function_funcdef_no
);
1921 assemble_integer (const0_rtx
, LONG_TYPE_SIZE
/ BITS_PER_UNIT
, align
, 1);
1924 switch_to_section (current_function_section ());
1926 #ifdef ASM_OUTPUT_REG_PUSH
1927 if (sval
&& REG_P (sval
))
1928 ASM_OUTPUT_REG_PUSH (file
, REGNO (sval
));
1929 if (chain
&& REG_P (chain
))
1930 ASM_OUTPUT_REG_PUSH (file
, REGNO (chain
));
1933 FUNCTION_PROFILER (file
, current_function_funcdef_no
);
1935 #ifdef ASM_OUTPUT_REG_PUSH
1936 if (chain
&& REG_P (chain
))
1937 ASM_OUTPUT_REG_POP (file
, REGNO (chain
));
1938 if (sval
&& REG_P (sval
))
1939 ASM_OUTPUT_REG_POP (file
, REGNO (sval
));
1943 /* Output assembler code for the end of a function.
1944 For clarity, args are same as those of `final_start_function'
1945 even though not all of them are needed. */
1948 final_end_function (void)
1952 if (!DECL_IGNORED_P (current_function_decl
))
1953 debug_hooks
->end_function (high_function_linenum
);
1955 /* Finally, output the function epilogue:
1956 code to restore the stack frame and return to the caller. */
1957 targetm
.asm_out
.function_epilogue (asm_out_file
);
1959 /* And debug output. */
1960 if (!DECL_IGNORED_P (current_function_decl
))
1961 debug_hooks
->end_epilogue (last_linenum
, last_filename
);
1963 if (!dwarf2_debug_info_emitted_p (current_function_decl
)
1964 && dwarf2out_do_frame ())
1965 dwarf2out_end_epilogue (last_linenum
, last_filename
);
1967 some_local_dynamic_name
= 0;
1971 /* Dumper helper for basic block information. FILE is the assembly
1972 output file, and INSN is the instruction being emitted. */
1975 dump_basic_block_info (FILE *file
, rtx_insn
*insn
, basic_block
*start_to_bb
,
1976 basic_block
*end_to_bb
, int bb_map_size
, int *bb_seqn
)
1980 if (!flag_debug_asm
)
1983 if (INSN_UID (insn
) < bb_map_size
1984 && (bb
= start_to_bb
[INSN_UID (insn
)]) != NULL
)
1989 fprintf (file
, "%s BLOCK %d", ASM_COMMENT_START
, bb
->index
);
1990 if (bb
->count
.initialized_p ())
1992 fprintf (file
, ", count:");
1993 bb
->count
.dump (file
);
1995 fprintf (file
, " seq:%d", (*bb_seqn
)++);
1996 fprintf (file
, "\n%s PRED:", ASM_COMMENT_START
);
1997 FOR_EACH_EDGE (e
, ei
, bb
->preds
)
1999 dump_edge_info (file
, e
, TDF_DETAILS
, 0);
2001 fprintf (file
, "\n");
2003 if (INSN_UID (insn
) < bb_map_size
2004 && (bb
= end_to_bb
[INSN_UID (insn
)]) != NULL
)
2009 fprintf (asm_out_file
, "%s SUCC:", ASM_COMMENT_START
);
2010 FOR_EACH_EDGE (e
, ei
, bb
->succs
)
2012 dump_edge_info (asm_out_file
, e
, TDF_DETAILS
, 1);
2014 fprintf (file
, "\n");
2018 /* Output assembler code for some insns: all or part of a function.
2019 For description of args, see `final_start_function', above. */
2022 final_1 (rtx_insn
*first
, FILE *file
, int seen
, int optimize_p
)
2024 rtx_insn
*insn
, *next
;
2026 /* Used for -dA dump. */
2027 basic_block
*start_to_bb
= NULL
;
2028 basic_block
*end_to_bb
= NULL
;
2029 int bb_map_size
= 0;
2032 last_ignored_compare
= 0;
2035 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
2037 /* If CC tracking across branches is enabled, record the insn which
2038 jumps to each branch only reached from one place. */
2039 if (optimize_p
&& JUMP_P (insn
))
2041 rtx lab
= JUMP_LABEL (insn
);
2042 if (lab
&& LABEL_P (lab
) && LABEL_NUSES (lab
) == 1)
2044 LABEL_REFS (lab
) = insn
;
2057 bb_map_size
= get_max_uid () + 1;
2058 start_to_bb
= XCNEWVEC (basic_block
, bb_map_size
);
2059 end_to_bb
= XCNEWVEC (basic_block
, bb_map_size
);
2061 /* There is no cfg for a thunk. */
2062 if (!cfun
->is_thunk
)
2063 FOR_EACH_BB_REVERSE_FN (bb
, cfun
)
2065 start_to_bb
[INSN_UID (BB_HEAD (bb
))] = bb
;
2066 end_to_bb
[INSN_UID (BB_END (bb
))] = bb
;
2070 /* Output the insns. */
2071 for (insn
= first
; insn
;)
2073 if (HAVE_ATTR_length
)
2075 if ((unsigned) INSN_UID (insn
) >= INSN_ADDRESSES_SIZE ())
2077 /* This can be triggered by bugs elsewhere in the compiler if
2078 new insns are created after init_insn_lengths is called. */
2079 gcc_assert (NOTE_P (insn
));
2080 insn_current_address
= -1;
2083 insn_current_address
= INSN_ADDRESSES (INSN_UID (insn
));
2086 dump_basic_block_info (file
, insn
, start_to_bb
, end_to_bb
,
2087 bb_map_size
, &bb_seqn
);
2088 insn
= final_scan_insn (insn
, file
, optimize_p
, 0, &seen
);
2091 maybe_output_next_view (&seen
);
2099 /* Remove CFI notes, to avoid compare-debug failures. */
2100 for (insn
= first
; insn
; insn
= next
)
2102 next
= NEXT_INSN (insn
);
2104 && (NOTE_KIND (insn
) == NOTE_INSN_CFI
2105 || NOTE_KIND (insn
) == NOTE_INSN_CFI_LABEL
))
2110 /* This is an exported final_1, callable without SEEN. */
2113 final (rtx_insn
*first
, FILE *file
, int optimize_p
)
2115 /* Those that use the internal final_start_function_1/final_1 API
2116 skip initial debug bind notes in final_start_function_1, and pass
2117 the modified FIRST to final_1. But those that use the public
2118 final_start_function/final APIs, final_start_function can't move
2119 FIRST because it's not passed by reference, so if they were
2120 skipped there, skip them again here. */
2121 while (in_initial_view_p (first
))
2122 first
= NEXT_INSN (first
);
2124 final_1 (first
, file
, 0, optimize_p
);
2128 get_insn_template (int code
, rtx insn
)
2130 switch (insn_data
[code
].output_format
)
2132 case INSN_OUTPUT_FORMAT_SINGLE
:
2133 return insn_data
[code
].output
.single
;
2134 case INSN_OUTPUT_FORMAT_MULTI
:
2135 return insn_data
[code
].output
.multi
[which_alternative
];
2136 case INSN_OUTPUT_FORMAT_FUNCTION
:
2138 return (*insn_data
[code
].output
.function
) (recog_data
.operand
,
2139 as_a
<rtx_insn
*> (insn
));
2146 /* Emit the appropriate declaration for an alternate-entry-point
2147 symbol represented by INSN, to FILE. INSN is a CODE_LABEL with
2148 LABEL_KIND != LABEL_NORMAL.
2150 The case fall-through in this function is intentional. */
2152 output_alternate_entry_point (FILE *file
, rtx_insn
*insn
)
2154 const char *name
= LABEL_NAME (insn
);
2156 switch (LABEL_KIND (insn
))
2158 case LABEL_WEAK_ENTRY
:
2159 #ifdef ASM_WEAKEN_LABEL
2160 ASM_WEAKEN_LABEL (file
, name
);
2163 case LABEL_GLOBAL_ENTRY
:
2164 targetm
.asm_out
.globalize_label (file
, name
);
2166 case LABEL_STATIC_ENTRY
:
2167 #ifdef ASM_OUTPUT_TYPE_DIRECTIVE
2168 ASM_OUTPUT_TYPE_DIRECTIVE (file
, name
, "function");
2170 ASM_OUTPUT_LABEL (file
, name
);
2179 /* Given a CALL_INSN, find and return the nested CALL. */
2181 call_from_call_insn (rtx_call_insn
*insn
)
2184 gcc_assert (CALL_P (insn
));
2187 while (GET_CODE (x
) != CALL
)
2189 switch (GET_CODE (x
))
2194 x
= COND_EXEC_CODE (x
);
2197 x
= XVECEXP (x
, 0, 0);
2207 /* Print a comment into the asm showing FILENAME, LINENUM, and the
2208 corresponding source line, if available. */
2211 asm_show_source (const char *filename
, int linenum
)
2217 const char *line
= location_get_source_line (filename
, linenum
, &line_size
);
2221 fprintf (asm_out_file
, "%s %s:%i: ", ASM_COMMENT_START
, filename
, linenum
);
2222 /* "line" is not 0-terminated, so we must use line_size. */
2223 fwrite (line
, 1, line_size
, asm_out_file
);
2224 fputc ('\n', asm_out_file
);
2227 /* The final scan for one insn, INSN.
2228 Args are same as in `final', except that INSN
2229 is the insn being scanned.
2230 Value returned is the next insn to be scanned.
2232 NOPEEPHOLES is the flag to disallow peephole processing (currently
2233 used for within delayed branch sequence output).
2235 SEEN is used to track the end of the prologue, for emitting
2236 debug information. We force the emission of a line note after
2237 both NOTE_INSN_PROLOGUE_END and NOTE_INSN_FUNCTION_BEG. */
2240 final_scan_insn (rtx_insn
*insn
, FILE *file
, int optimize_p ATTRIBUTE_UNUSED
,
2241 int nopeepholes ATTRIBUTE_UNUSED
, int *seen
)
2247 rtx_jump_table_data
*table
;
2251 /* Ignore deleted insns. These can occur when we split insns (due to a
2252 template of "#") while not optimizing. */
2253 if (insn
->deleted ())
2254 return NEXT_INSN (insn
);
2256 switch (GET_CODE (insn
))
2259 switch (NOTE_KIND (insn
))
2261 case NOTE_INSN_DELETED
:
2262 case NOTE_INSN_UPDATE_SJLJ_CONTEXT
:
2265 case NOTE_INSN_SWITCH_TEXT_SECTIONS
:
2266 maybe_output_next_view (seen
);
2268 in_cold_section_p
= !in_cold_section_p
;
2270 if (in_cold_section_p
)
2272 = clone_function_name (current_function_decl
, "cold");
2274 if (dwarf2out_do_frame ())
2276 dwarf2out_switch_text_section ();
2277 if (!dwarf2_debug_info_emitted_p (current_function_decl
)
2278 && !DECL_IGNORED_P (current_function_decl
))
2279 debug_hooks
->switch_text_section ();
2281 else if (!DECL_IGNORED_P (current_function_decl
))
2282 debug_hooks
->switch_text_section ();
2284 switch_to_section (current_function_section ());
2285 targetm
.asm_out
.function_switched_text_sections (asm_out_file
,
2286 current_function_decl
,
2288 /* Emit a label for the split cold section. Form label name by
2289 suffixing "cold" to the original function's name. */
2290 if (in_cold_section_p
)
2292 #ifdef ASM_DECLARE_COLD_FUNCTION_NAME
2293 ASM_DECLARE_COLD_FUNCTION_NAME (asm_out_file
,
2295 (cold_function_name
),
2296 current_function_decl
);
2298 ASM_OUTPUT_LABEL (asm_out_file
,
2299 IDENTIFIER_POINTER (cold_function_name
));
2304 case NOTE_INSN_BASIC_BLOCK
:
2305 if (need_profile_function
)
2307 profile_function (asm_out_file
);
2308 need_profile_function
= false;
2311 if (targetm
.asm_out
.unwind_emit
)
2312 targetm
.asm_out
.unwind_emit (asm_out_file
, insn
);
2314 discriminator
= NOTE_BASIC_BLOCK (insn
)->discriminator
;
2318 case NOTE_INSN_EH_REGION_BEG
:
2319 ASM_OUTPUT_DEBUG_LABEL (asm_out_file
, "LEHB",
2320 NOTE_EH_HANDLER (insn
));
2323 case NOTE_INSN_EH_REGION_END
:
2324 ASM_OUTPUT_DEBUG_LABEL (asm_out_file
, "LEHE",
2325 NOTE_EH_HANDLER (insn
));
2328 case NOTE_INSN_PROLOGUE_END
:
2329 targetm
.asm_out
.function_end_prologue (file
);
2330 profile_after_prologue (file
);
2332 if ((*seen
& (SEEN_EMITTED
| SEEN_NOTE
)) == SEEN_NOTE
)
2334 *seen
|= SEEN_EMITTED
;
2335 force_source_line
= true;
2342 case NOTE_INSN_EPILOGUE_BEG
:
2343 if (!DECL_IGNORED_P (current_function_decl
))
2344 (*debug_hooks
->begin_epilogue
) (last_linenum
, last_filename
);
2345 targetm
.asm_out
.function_begin_epilogue (file
);
2349 dwarf2out_emit_cfi (NOTE_CFI (insn
));
2352 case NOTE_INSN_CFI_LABEL
:
2353 ASM_OUTPUT_DEBUG_LABEL (asm_out_file
, "LCFI",
2354 NOTE_LABEL_NUMBER (insn
));
2357 case NOTE_INSN_FUNCTION_BEG
:
2358 if (need_profile_function
)
2360 profile_function (asm_out_file
);
2361 need_profile_function
= false;
2365 if (!DECL_IGNORED_P (current_function_decl
))
2366 debug_hooks
->end_prologue (last_linenum
, last_filename
);
2368 if ((*seen
& (SEEN_EMITTED
| SEEN_NOTE
)) == SEEN_NOTE
)
2370 *seen
|= SEEN_EMITTED
;
2371 force_source_line
= true;
2378 case NOTE_INSN_BLOCK_BEG
:
2379 if (debug_info_level
== DINFO_LEVEL_NORMAL
2380 || debug_info_level
== DINFO_LEVEL_VERBOSE
2381 || write_symbols
== DWARF2_DEBUG
2382 || write_symbols
== VMS_AND_DWARF2_DEBUG
2383 || write_symbols
== VMS_DEBUG
)
2385 int n
= BLOCK_NUMBER (NOTE_BLOCK (insn
));
2389 high_block_linenum
= last_linenum
;
2391 /* Output debugging info about the symbol-block beginning. */
2392 if (!DECL_IGNORED_P (current_function_decl
))
2393 debug_hooks
->begin_block (last_linenum
, n
);
2395 /* Mark this block as output. */
2396 TREE_ASM_WRITTEN (NOTE_BLOCK (insn
)) = 1;
2397 BLOCK_IN_COLD_SECTION_P (NOTE_BLOCK (insn
)) = in_cold_section_p
;
2399 if (write_symbols
== DBX_DEBUG
)
2401 location_t
*locus_ptr
2402 = block_nonartificial_location (NOTE_BLOCK (insn
));
2404 if (locus_ptr
!= NULL
)
2406 override_filename
= LOCATION_FILE (*locus_ptr
);
2407 override_linenum
= LOCATION_LINE (*locus_ptr
);
2408 override_columnnum
= LOCATION_COLUMN (*locus_ptr
);
2413 case NOTE_INSN_BLOCK_END
:
2414 maybe_output_next_view (seen
);
2416 if (debug_info_level
== DINFO_LEVEL_NORMAL
2417 || debug_info_level
== DINFO_LEVEL_VERBOSE
2418 || write_symbols
== DWARF2_DEBUG
2419 || write_symbols
== VMS_AND_DWARF2_DEBUG
2420 || write_symbols
== VMS_DEBUG
)
2422 int n
= BLOCK_NUMBER (NOTE_BLOCK (insn
));
2426 /* End of a symbol-block. */
2428 gcc_assert (block_depth
>= 0);
2430 if (!DECL_IGNORED_P (current_function_decl
))
2431 debug_hooks
->end_block (high_block_linenum
, n
);
2432 gcc_assert (BLOCK_IN_COLD_SECTION_P (NOTE_BLOCK (insn
))
2433 == in_cold_section_p
);
2435 if (write_symbols
== DBX_DEBUG
)
2437 tree outer_block
= BLOCK_SUPERCONTEXT (NOTE_BLOCK (insn
));
2438 location_t
*locus_ptr
2439 = block_nonartificial_location (outer_block
);
2441 if (locus_ptr
!= NULL
)
2443 override_filename
= LOCATION_FILE (*locus_ptr
);
2444 override_linenum
= LOCATION_LINE (*locus_ptr
);
2445 override_columnnum
= LOCATION_COLUMN (*locus_ptr
);
2449 override_filename
= NULL
;
2450 override_linenum
= 0;
2451 override_columnnum
= 0;
2456 case NOTE_INSN_DELETED_LABEL
:
2457 /* Emit the label. We may have deleted the CODE_LABEL because
2458 the label could be proved to be unreachable, though still
2459 referenced (in the form of having its address taken. */
2460 ASM_OUTPUT_DEBUG_LABEL (file
, "L", CODE_LABEL_NUMBER (insn
));
2463 case NOTE_INSN_DELETED_DEBUG_LABEL
:
2464 /* Similarly, but need to use different namespace for it. */
2465 if (CODE_LABEL_NUMBER (insn
) != -1)
2466 ASM_OUTPUT_DEBUG_LABEL (file
, "LDL", CODE_LABEL_NUMBER (insn
));
2469 case NOTE_INSN_VAR_LOCATION
:
2470 case NOTE_INSN_CALL_ARG_LOCATION
:
2471 if (!DECL_IGNORED_P (current_function_decl
))
2473 debug_hooks
->var_location (insn
);
2474 set_next_view_needed (seen
);
2478 case NOTE_INSN_BEGIN_STMT
:
2479 gcc_checking_assert (cfun
->debug_nonbind_markers
);
2480 if (!DECL_IGNORED_P (current_function_decl
)
2481 && notice_source_line (insn
, NULL
))
2484 (*debug_hooks
->source_line
) (last_linenum
, last_columnnum
,
2485 last_filename
, last_discriminator
,
2487 clear_next_view_needed (seen
);
2491 case NOTE_INSN_INLINE_ENTRY
:
2492 gcc_checking_assert (cfun
->debug_nonbind_markers
);
2493 if (!DECL_IGNORED_P (current_function_decl
))
2495 if (!notice_source_line (insn
, NULL
))
2497 (*debug_hooks
->inline_entry
) (LOCATION_BLOCK
2498 (NOTE_MARKER_LOCATION (insn
)));
2499 goto output_source_line
;
2513 /* The target port might emit labels in the output function for
2514 some insn, e.g. sh.c output_branchy_insn. */
2515 if (CODE_LABEL_NUMBER (insn
) <= max_labelno
)
2517 int align
= LABEL_TO_ALIGNMENT (insn
);
2518 #ifdef ASM_OUTPUT_MAX_SKIP_ALIGN
2519 int max_skip
= LABEL_TO_MAX_SKIP (insn
);
2522 if (align
&& NEXT_INSN (insn
))
2524 #ifdef ASM_OUTPUT_MAX_SKIP_ALIGN
2525 ASM_OUTPUT_MAX_SKIP_ALIGN (file
, align
, max_skip
);
2527 #ifdef ASM_OUTPUT_ALIGN_WITH_NOP
2528 ASM_OUTPUT_ALIGN_WITH_NOP (file
, align
);
2530 ASM_OUTPUT_ALIGN (file
, align
);
2537 if (!DECL_IGNORED_P (current_function_decl
) && LABEL_NAME (insn
))
2538 debug_hooks
->label (as_a
<rtx_code_label
*> (insn
));
2542 /* If this label is followed by a jump-table, make sure we put
2543 the label in the read-only section. Also possibly write the
2544 label and jump table together. */
2545 table
= jump_table_for_label (as_a
<rtx_code_label
*> (insn
));
2548 #if defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC)
2549 /* In this case, the case vector is being moved by the
2550 target, so don't output the label at all. Leave that
2551 to the back end macros. */
2553 if (! JUMP_TABLES_IN_TEXT_SECTION
)
2557 switch_to_section (targetm
.asm_out
.function_rodata_section
2558 (current_function_decl
));
2560 #ifdef ADDR_VEC_ALIGN
2561 log_align
= ADDR_VEC_ALIGN (table
);
2563 log_align
= exact_log2 (BIGGEST_ALIGNMENT
/ BITS_PER_UNIT
);
2565 ASM_OUTPUT_ALIGN (file
, log_align
);
2568 switch_to_section (current_function_section ());
2570 #ifdef ASM_OUTPUT_CASE_LABEL
2571 ASM_OUTPUT_CASE_LABEL (file
, "L", CODE_LABEL_NUMBER (insn
), table
);
2573 targetm
.asm_out
.internal_label (file
, "L", CODE_LABEL_NUMBER (insn
));
2578 if (LABEL_ALT_ENTRY_P (insn
))
2579 output_alternate_entry_point (file
, insn
);
2581 targetm
.asm_out
.internal_label (file
, "L", CODE_LABEL_NUMBER (insn
));
2586 rtx body
= PATTERN (insn
);
2587 int insn_code_number
;
2589 bool is_stmt
, *is_stmt_p
;
2591 if (MAY_HAVE_DEBUG_MARKER_INSNS
&& cfun
->debug_nonbind_markers
)
2597 is_stmt_p
= &is_stmt
;
2599 /* Reset this early so it is correct for ASM statements. */
2600 current_insn_predicate
= NULL_RTX
;
2602 /* An INSN, JUMP_INSN or CALL_INSN.
2603 First check for special kinds that recog doesn't recognize. */
2605 if (GET_CODE (body
) == USE
/* These are just declarations. */
2606 || GET_CODE (body
) == CLOBBER
)
2611 /* If there is a REG_CC_SETTER note on this insn, it means that
2612 the setting of the condition code was done in the delay slot
2613 of the insn that branched here. So recover the cc status
2614 from the insn that set it. */
2616 rtx note
= find_reg_note (insn
, REG_CC_SETTER
, NULL_RTX
);
2619 rtx_insn
*other
= as_a
<rtx_insn
*> (XEXP (note
, 0));
2620 NOTICE_UPDATE_CC (PATTERN (other
), other
);
2621 cc_prev_status
= cc_status
;
2626 /* Detect insns that are really jump-tables
2627 and output them as such. */
2629 if (JUMP_TABLE_DATA_P (insn
))
2631 #if !(defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC))
2635 if (! JUMP_TABLES_IN_TEXT_SECTION
)
2636 switch_to_section (targetm
.asm_out
.function_rodata_section
2637 (current_function_decl
));
2639 switch_to_section (current_function_section ());
2643 #if defined(ASM_OUTPUT_ADDR_VEC) || defined(ASM_OUTPUT_ADDR_DIFF_VEC)
2644 if (GET_CODE (body
) == ADDR_VEC
)
2646 #ifdef ASM_OUTPUT_ADDR_VEC
2647 ASM_OUTPUT_ADDR_VEC (PREV_INSN (insn
), body
);
2654 #ifdef ASM_OUTPUT_ADDR_DIFF_VEC
2655 ASM_OUTPUT_ADDR_DIFF_VEC (PREV_INSN (insn
), body
);
2661 vlen
= XVECLEN (body
, GET_CODE (body
) == ADDR_DIFF_VEC
);
2662 for (idx
= 0; idx
< vlen
; idx
++)
2664 if (GET_CODE (body
) == ADDR_VEC
)
2666 #ifdef ASM_OUTPUT_ADDR_VEC_ELT
2667 ASM_OUTPUT_ADDR_VEC_ELT
2668 (file
, CODE_LABEL_NUMBER (XEXP (XVECEXP (body
, 0, idx
), 0)));
2675 #ifdef ASM_OUTPUT_ADDR_DIFF_ELT
2676 ASM_OUTPUT_ADDR_DIFF_ELT
2679 CODE_LABEL_NUMBER (XEXP (XVECEXP (body
, 1, idx
), 0)),
2680 CODE_LABEL_NUMBER (XEXP (XEXP (body
, 0), 0)));
2686 #ifdef ASM_OUTPUT_CASE_END
2687 ASM_OUTPUT_CASE_END (file
,
2688 CODE_LABEL_NUMBER (PREV_INSN (insn
)),
2693 switch_to_section (current_function_section ());
2695 if (debug_variable_location_views
2696 && !DECL_IGNORED_P (current_function_decl
))
2697 debug_hooks
->var_location (insn
);
2701 /* Output this line note if it is the first or the last line
2703 if (!DECL_IGNORED_P (current_function_decl
)
2704 && notice_source_line (insn
, is_stmt_p
))
2706 if (flag_verbose_asm
)
2707 asm_show_source (last_filename
, last_linenum
);
2708 (*debug_hooks
->source_line
) (last_linenum
, last_columnnum
,
2709 last_filename
, last_discriminator
,
2711 clear_next_view_needed (seen
);
2714 maybe_output_next_view (seen
);
2716 gcc_checking_assert (!DEBUG_INSN_P (insn
));
2718 if (GET_CODE (body
) == PARALLEL
2719 && GET_CODE (XVECEXP (body
, 0, 0)) == ASM_INPUT
)
2720 body
= XVECEXP (body
, 0, 0);
2722 if (GET_CODE (body
) == ASM_INPUT
)
2724 const char *string
= XSTR (body
, 0);
2726 /* There's no telling what that did to the condition codes. */
2731 expanded_location loc
;
2734 loc
= expand_location (ASM_INPUT_SOURCE_LOCATION (body
));
2735 if (*loc
.file
&& loc
.line
)
2736 fprintf (asm_out_file
, "%s %i \"%s\" 1\n",
2737 ASM_COMMENT_START
, loc
.line
, loc
.file
);
2738 fprintf (asm_out_file
, "\t%s\n", string
);
2739 #if HAVE_AS_LINE_ZERO
2740 if (*loc
.file
&& loc
.line
)
2741 fprintf (asm_out_file
, "%s 0 \"\" 2\n", ASM_COMMENT_START
);
2747 /* Detect `asm' construct with operands. */
2748 if (asm_noperands (body
) >= 0)
2750 unsigned int noperands
= asm_noperands (body
);
2751 rtx
*ops
= XALLOCAVEC (rtx
, noperands
);
2754 expanded_location expanded
;
2756 /* There's no telling what that did to the condition codes. */
2759 /* Get out the operand values. */
2760 string
= decode_asm_operands (body
, ops
, NULL
, NULL
, NULL
, &loc
);
2761 /* Inhibit dying on what would otherwise be compiler bugs. */
2762 insn_noperands
= noperands
;
2763 this_is_asm_operands
= insn
;
2764 expanded
= expand_location (loc
);
2766 #ifdef FINAL_PRESCAN_INSN
2767 FINAL_PRESCAN_INSN (insn
, ops
, insn_noperands
);
2770 /* Output the insn using them. */
2774 if (expanded
.file
&& expanded
.line
)
2775 fprintf (asm_out_file
, "%s %i \"%s\" 1\n",
2776 ASM_COMMENT_START
, expanded
.line
, expanded
.file
);
2777 output_asm_insn (string
, ops
);
2778 #if HAVE_AS_LINE_ZERO
2779 if (expanded
.file
&& expanded
.line
)
2780 fprintf (asm_out_file
, "%s 0 \"\" 2\n", ASM_COMMENT_START
);
2784 if (targetm
.asm_out
.final_postscan_insn
)
2785 targetm
.asm_out
.final_postscan_insn (file
, insn
, ops
,
2788 this_is_asm_operands
= 0;
2794 if (rtx_sequence
*seq
= dyn_cast
<rtx_sequence
*> (body
))
2796 /* A delayed-branch sequence */
2799 final_sequence
= seq
;
2801 /* The first insn in this SEQUENCE might be a JUMP_INSN that will
2802 force the restoration of a comparison that was previously
2803 thought unnecessary. If that happens, cancel this sequence
2804 and cause that insn to be restored. */
2806 next
= final_scan_insn (seq
->insn (0), file
, 0, 1, seen
);
2807 if (next
!= seq
->insn (1))
2813 for (i
= 1; i
< seq
->len (); i
++)
2815 rtx_insn
*insn
= seq
->insn (i
);
2816 rtx_insn
*next
= NEXT_INSN (insn
);
2817 /* We loop in case any instruction in a delay slot gets
2820 insn
= final_scan_insn (insn
, file
, 0, 1, seen
);
2821 while (insn
!= next
);
2823 #ifdef DBR_OUTPUT_SEQEND
2824 DBR_OUTPUT_SEQEND (file
);
2828 /* If the insn requiring the delay slot was a CALL_INSN, the
2829 insns in the delay slot are actually executed before the
2830 called function. Hence we don't preserve any CC-setting
2831 actions in these insns and the CC must be marked as being
2832 clobbered by the function. */
2833 if (CALL_P (seq
->insn (0)))
2840 /* We have a real machine instruction as rtl. */
2842 body
= PATTERN (insn
);
2845 set
= single_set (insn
);
2847 /* Check for redundant test and compare instructions
2848 (when the condition codes are already set up as desired).
2849 This is done only when optimizing; if not optimizing,
2850 it should be possible for the user to alter a variable
2851 with the debugger in between statements
2852 and the next statement should reexamine the variable
2853 to compute the condition codes. */
2858 && GET_CODE (SET_DEST (set
)) == CC0
2859 && insn
!= last_ignored_compare
)
2862 if (GET_CODE (SET_SRC (set
)) == SUBREG
)
2863 SET_SRC (set
) = alter_subreg (&SET_SRC (set
), true);
2865 src1
= SET_SRC (set
);
2867 if (GET_CODE (SET_SRC (set
)) == COMPARE
)
2869 if (GET_CODE (XEXP (SET_SRC (set
), 0)) == SUBREG
)
2870 XEXP (SET_SRC (set
), 0)
2871 = alter_subreg (&XEXP (SET_SRC (set
), 0), true);
2872 if (GET_CODE (XEXP (SET_SRC (set
), 1)) == SUBREG
)
2873 XEXP (SET_SRC (set
), 1)
2874 = alter_subreg (&XEXP (SET_SRC (set
), 1), true);
2875 if (XEXP (SET_SRC (set
), 1)
2876 == CONST0_RTX (GET_MODE (XEXP (SET_SRC (set
), 0))))
2877 src2
= XEXP (SET_SRC (set
), 0);
2879 if ((cc_status
.value1
!= 0
2880 && rtx_equal_p (src1
, cc_status
.value1
))
2881 || (cc_status
.value2
!= 0
2882 && rtx_equal_p (src1
, cc_status
.value2
))
2883 || (src2
!= 0 && cc_status
.value1
!= 0
2884 && rtx_equal_p (src2
, cc_status
.value1
))
2885 || (src2
!= 0 && cc_status
.value2
!= 0
2886 && rtx_equal_p (src2
, cc_status
.value2
)))
2888 /* Don't delete insn if it has an addressing side-effect. */
2889 if (! FIND_REG_INC_NOTE (insn
, NULL_RTX
)
2890 /* or if anything in it is volatile. */
2891 && ! volatile_refs_p (PATTERN (insn
)))
2893 /* We don't really delete the insn; just ignore it. */
2894 last_ignored_compare
= insn
;
2901 /* If this is a conditional branch, maybe modify it
2902 if the cc's are in a nonstandard state
2903 so that it accomplishes the same thing that it would
2904 do straightforwardly if the cc's were set up normally. */
2906 if (cc_status
.flags
!= 0
2908 && GET_CODE (body
) == SET
2909 && SET_DEST (body
) == pc_rtx
2910 && GET_CODE (SET_SRC (body
)) == IF_THEN_ELSE
2911 && COMPARISON_P (XEXP (SET_SRC (body
), 0))
2912 && XEXP (XEXP (SET_SRC (body
), 0), 0) == cc0_rtx
)
2914 /* This function may alter the contents of its argument
2915 and clear some of the cc_status.flags bits.
2916 It may also return 1 meaning condition now always true
2917 or -1 meaning condition now always false
2918 or 2 meaning condition nontrivial but altered. */
2919 int result
= alter_cond (XEXP (SET_SRC (body
), 0));
2920 /* If condition now has fixed value, replace the IF_THEN_ELSE
2921 with its then-operand or its else-operand. */
2923 SET_SRC (body
) = XEXP (SET_SRC (body
), 1);
2925 SET_SRC (body
) = XEXP (SET_SRC (body
), 2);
2927 /* The jump is now either unconditional or a no-op.
2928 If it has become a no-op, don't try to output it.
2929 (It would not be recognized.) */
2930 if (SET_SRC (body
) == pc_rtx
)
2935 else if (ANY_RETURN_P (SET_SRC (body
)))
2936 /* Replace (set (pc) (return)) with (return). */
2937 PATTERN (insn
) = body
= SET_SRC (body
);
2939 /* Rerecognize the instruction if it has changed. */
2941 INSN_CODE (insn
) = -1;
2944 /* If this is a conditional trap, maybe modify it if the cc's
2945 are in a nonstandard state so that it accomplishes the same
2946 thing that it would do straightforwardly if the cc's were
2948 if (cc_status
.flags
!= 0
2949 && NONJUMP_INSN_P (insn
)
2950 && GET_CODE (body
) == TRAP_IF
2951 && COMPARISON_P (TRAP_CONDITION (body
))
2952 && XEXP (TRAP_CONDITION (body
), 0) == cc0_rtx
)
2954 /* This function may alter the contents of its argument
2955 and clear some of the cc_status.flags bits.
2956 It may also return 1 meaning condition now always true
2957 or -1 meaning condition now always false
2958 or 2 meaning condition nontrivial but altered. */
2959 int result
= alter_cond (TRAP_CONDITION (body
));
2961 /* If TRAP_CONDITION has become always false, delete the
2969 /* If TRAP_CONDITION has become always true, replace
2970 TRAP_CONDITION with const_true_rtx. */
2972 TRAP_CONDITION (body
) = const_true_rtx
;
2974 /* Rerecognize the instruction if it has changed. */
2976 INSN_CODE (insn
) = -1;
2979 /* Make same adjustments to instructions that examine the
2980 condition codes without jumping and instructions that
2981 handle conditional moves (if this machine has either one). */
2983 if (cc_status
.flags
!= 0
2986 rtx cond_rtx
, then_rtx
, else_rtx
;
2989 && GET_CODE (SET_SRC (set
)) == IF_THEN_ELSE
)
2991 cond_rtx
= XEXP (SET_SRC (set
), 0);
2992 then_rtx
= XEXP (SET_SRC (set
), 1);
2993 else_rtx
= XEXP (SET_SRC (set
), 2);
2997 cond_rtx
= SET_SRC (set
);
2998 then_rtx
= const_true_rtx
;
2999 else_rtx
= const0_rtx
;
3002 if (COMPARISON_P (cond_rtx
)
3003 && XEXP (cond_rtx
, 0) == cc0_rtx
)
3006 result
= alter_cond (cond_rtx
);
3008 validate_change (insn
, &SET_SRC (set
), then_rtx
, 0);
3009 else if (result
== -1)
3010 validate_change (insn
, &SET_SRC (set
), else_rtx
, 0);
3011 else if (result
== 2)
3012 INSN_CODE (insn
) = -1;
3013 if (SET_DEST (set
) == SET_SRC (set
))
3020 /* Do machine-specific peephole optimizations if desired. */
3022 if (HAVE_peephole
&& optimize_p
&& !flag_no_peephole
&& !nopeepholes
)
3024 rtx_insn
*next
= peephole (insn
);
3025 /* When peepholing, if there were notes within the peephole,
3026 emit them before the peephole. */
3027 if (next
!= 0 && next
!= NEXT_INSN (insn
))
3029 rtx_insn
*note
, *prev
= PREV_INSN (insn
);
3031 for (note
= NEXT_INSN (insn
); note
!= next
;
3032 note
= NEXT_INSN (note
))
3033 final_scan_insn (note
, file
, optimize_p
, nopeepholes
, seen
);
3035 /* Put the notes in the proper position for a later
3036 rescan. For example, the SH target can do this
3037 when generating a far jump in a delayed branch
3039 note
= NEXT_INSN (insn
);
3040 SET_PREV_INSN (note
) = prev
;
3041 SET_NEXT_INSN (prev
) = note
;
3042 SET_NEXT_INSN (PREV_INSN (next
)) = insn
;
3043 SET_PREV_INSN (insn
) = PREV_INSN (next
);
3044 SET_NEXT_INSN (insn
) = next
;
3045 SET_PREV_INSN (next
) = insn
;
3048 /* PEEPHOLE might have changed this. */
3049 body
= PATTERN (insn
);
3052 /* Try to recognize the instruction.
3053 If successful, verify that the operands satisfy the
3054 constraints for the instruction. Crash if they don't,
3055 since `reload' should have changed them so that they do. */
3057 insn_code_number
= recog_memoized (insn
);
3058 cleanup_subreg_operands (insn
);
3060 /* Dump the insn in the assembly for debugging (-dAP).
3061 If the final dump is requested as slim RTL, dump slim
3062 RTL to the assembly file also. */
3063 if (flag_dump_rtl_in_asm
)
3065 print_rtx_head
= ASM_COMMENT_START
;
3066 if (! (dump_flags
& TDF_SLIM
))
3067 print_rtl_single (asm_out_file
, insn
);
3069 dump_insn_slim (asm_out_file
, insn
);
3070 print_rtx_head
= "";
3073 if (! constrain_operands_cached (insn
, 1))
3074 fatal_insn_not_found (insn
);
3076 /* Some target machines need to prescan each insn before
3079 #ifdef FINAL_PRESCAN_INSN
3080 FINAL_PRESCAN_INSN (insn
, recog_data
.operand
, recog_data
.n_operands
);
3083 if (targetm
.have_conditional_execution ()
3084 && GET_CODE (PATTERN (insn
)) == COND_EXEC
)
3085 current_insn_predicate
= COND_EXEC_TEST (PATTERN (insn
));
3088 cc_prev_status
= cc_status
;
3090 /* Update `cc_status' for this instruction.
3091 The instruction's output routine may change it further.
3092 If the output routine for a jump insn needs to depend
3093 on the cc status, it should look at cc_prev_status. */
3095 NOTICE_UPDATE_CC (body
, insn
);
3098 current_output_insn
= debug_insn
= insn
;
3100 /* Find the proper template for this insn. */
3101 templ
= get_insn_template (insn_code_number
, insn
);
3103 /* If the C code returns 0, it means that it is a jump insn
3104 which follows a deleted test insn, and that test insn
3105 needs to be reinserted. */
3110 gcc_assert (prev_nonnote_insn (insn
) == last_ignored_compare
);
3112 /* We have already processed the notes between the setter and
3113 the user. Make sure we don't process them again, this is
3114 particularly important if one of the notes is a block
3115 scope note or an EH note. */
3117 prev
!= last_ignored_compare
;
3118 prev
= PREV_INSN (prev
))
3121 delete_insn (prev
); /* Use delete_note. */
3127 /* If the template is the string "#", it means that this insn must
3129 if (templ
[0] == '#' && templ
[1] == '\0')
3131 rtx_insn
*new_rtx
= try_split (body
, insn
, 0);
3133 /* If we didn't split the insn, go away. */
3134 if (new_rtx
== insn
&& PATTERN (new_rtx
) == body
)
3135 fatal_insn ("could not split insn", insn
);
3137 /* If we have a length attribute, this instruction should have
3138 been split in shorten_branches, to ensure that we would have
3139 valid length info for the splitees. */
3140 gcc_assert (!HAVE_ATTR_length
);
3145 /* ??? This will put the directives in the wrong place if
3146 get_insn_template outputs assembly directly. However calling it
3147 before get_insn_template breaks if the insns is split. */
3148 if (targetm
.asm_out
.unwind_emit_before_insn
3149 && targetm
.asm_out
.unwind_emit
)
3150 targetm
.asm_out
.unwind_emit (asm_out_file
, insn
);
3152 rtx_call_insn
*call_insn
= dyn_cast
<rtx_call_insn
*> (insn
);
3153 if (call_insn
!= NULL
)
3155 rtx x
= call_from_call_insn (call_insn
);
3157 if (x
&& MEM_P (x
) && GET_CODE (XEXP (x
, 0)) == SYMBOL_REF
)
3161 t
= SYMBOL_REF_DECL (x
);
3163 assemble_external (t
);
3167 /* Output assembler code from the template. */
3168 output_asm_insn (templ
, recog_data
.operand
);
3170 /* Some target machines need to postscan each insn after
3172 if (targetm
.asm_out
.final_postscan_insn
)
3173 targetm
.asm_out
.final_postscan_insn (file
, insn
, recog_data
.operand
,
3174 recog_data
.n_operands
);
3176 if (!targetm
.asm_out
.unwind_emit_before_insn
3177 && targetm
.asm_out
.unwind_emit
)
3178 targetm
.asm_out
.unwind_emit (asm_out_file
, insn
);
3180 /* Let the debug info back-end know about this call. We do this only
3181 after the instruction has been emitted because labels that may be
3182 created to reference the call instruction must appear after it. */
3183 if ((debug_variable_location_views
|| call_insn
!= NULL
)
3184 && !DECL_IGNORED_P (current_function_decl
))
3185 debug_hooks
->var_location (insn
);
3187 current_output_insn
= debug_insn
= 0;
3190 return NEXT_INSN (insn
);
3193 /* Return whether a source line note needs to be emitted before INSN.
3194 Sets IS_STMT to TRUE if the line should be marked as a possible
3195 breakpoint location. */
3198 notice_source_line (rtx_insn
*insn
, bool *is_stmt
)
3200 const char *filename
;
3201 int linenum
, columnnum
;
3203 if (NOTE_MARKER_P (insn
))
3205 location_t loc
= NOTE_MARKER_LOCATION (insn
);
3206 /* The inline entry markers (gimple, insn, note) carry the
3207 location of the call, because that's what we want to carry
3208 during compilation, but the location we want to output in
3209 debug information for the inline entry point is the location
3210 of the function itself. */
3211 if (NOTE_KIND (insn
) == NOTE_INSN_INLINE_ENTRY
)
3213 tree block
= LOCATION_BLOCK (loc
);
3214 tree fn
= block_ultimate_origin (block
);
3215 loc
= DECL_SOURCE_LOCATION (fn
);
3217 expanded_location xloc
= expand_location (loc
);
3220 gcc_checking_assert (LOCATION_LOCUS (loc
) == UNKNOWN_LOCATION
3221 || LOCATION_LOCUS (loc
) == BUILTINS_LOCATION
);
3224 filename
= xloc
.file
;
3225 linenum
= xloc
.line
;
3226 columnnum
= xloc
.column
;
3227 force_source_line
= true;
3229 else if (override_filename
)
3231 filename
= override_filename
;
3232 linenum
= override_linenum
;
3233 columnnum
= override_columnnum
;
3235 else if (INSN_HAS_LOCATION (insn
))
3237 expanded_location xloc
= insn_location (insn
);
3238 filename
= xloc
.file
;
3239 linenum
= xloc
.line
;
3240 columnnum
= xloc
.column
;
3249 if (filename
== NULL
)
3252 if (force_source_line
3253 || filename
!= last_filename
3254 || last_linenum
!= linenum
3255 || (debug_column_info
&& last_columnnum
!= columnnum
))
3257 force_source_line
= false;
3258 last_filename
= filename
;
3259 last_linenum
= linenum
;
3260 last_columnnum
= columnnum
;
3261 last_discriminator
= discriminator
;
3264 high_block_linenum
= MAX (last_linenum
, high_block_linenum
);
3265 high_function_linenum
= MAX (last_linenum
, high_function_linenum
);
3269 if (SUPPORTS_DISCRIMINATOR
&& last_discriminator
!= discriminator
)
3271 /* If the discriminator changed, but the line number did not,
3272 output the line table entry with is_stmt false so the
3273 debugger does not treat this as a breakpoint location. */
3274 last_discriminator
= discriminator
;
3283 /* For each operand in INSN, simplify (subreg (reg)) so that it refers
3284 directly to the desired hard register. */
3287 cleanup_subreg_operands (rtx_insn
*insn
)
3290 bool changed
= false;
3291 extract_insn_cached (insn
);
3292 for (i
= 0; i
< recog_data
.n_operands
; i
++)
3294 /* The following test cannot use recog_data.operand when testing
3295 for a SUBREG: the underlying object might have been changed
3296 already if we are inside a match_operator expression that
3297 matches the else clause. Instead we test the underlying
3298 expression directly. */
3299 if (GET_CODE (*recog_data
.operand_loc
[i
]) == SUBREG
)
3301 recog_data
.operand
[i
] = alter_subreg (recog_data
.operand_loc
[i
], true);
3304 else if (GET_CODE (recog_data
.operand
[i
]) == PLUS
3305 || GET_CODE (recog_data
.operand
[i
]) == MULT
3306 || MEM_P (recog_data
.operand
[i
]))
3307 recog_data
.operand
[i
] = walk_alter_subreg (recog_data
.operand_loc
[i
], &changed
);
3310 for (i
= 0; i
< recog_data
.n_dups
; i
++)
3312 if (GET_CODE (*recog_data
.dup_loc
[i
]) == SUBREG
)
3314 *recog_data
.dup_loc
[i
] = alter_subreg (recog_data
.dup_loc
[i
], true);
3317 else if (GET_CODE (*recog_data
.dup_loc
[i
]) == PLUS
3318 || GET_CODE (*recog_data
.dup_loc
[i
]) == MULT
3319 || MEM_P (*recog_data
.dup_loc
[i
]))
3320 *recog_data
.dup_loc
[i
] = walk_alter_subreg (recog_data
.dup_loc
[i
], &changed
);
3323 df_insn_rescan (insn
);
3326 /* If X is a SUBREG, try to replace it with a REG or a MEM, based on
3327 the thing it is a subreg of. Do it anyway if FINAL_P. */
3330 alter_subreg (rtx
*xp
, bool final_p
)
3333 rtx y
= SUBREG_REG (x
);
3335 /* simplify_subreg does not remove subreg from volatile references.
3336 We are required to. */
3339 poly_int64 offset
= SUBREG_BYTE (x
);
3341 /* For paradoxical subregs on big-endian machines, SUBREG_BYTE
3342 contains 0 instead of the proper offset. See simplify_subreg. */
3343 if (paradoxical_subreg_p (x
))
3344 offset
= byte_lowpart_offset (GET_MODE (x
), GET_MODE (y
));
3347 *xp
= adjust_address (y
, GET_MODE (x
), offset
);
3349 *xp
= adjust_address_nv (y
, GET_MODE (x
), offset
);
3351 else if (REG_P (y
) && HARD_REGISTER_P (y
))
3353 rtx new_rtx
= simplify_subreg (GET_MODE (x
), y
, GET_MODE (y
),
3358 else if (final_p
&& REG_P (y
))
3360 /* Simplify_subreg can't handle some REG cases, but we have to. */
3364 regno
= subreg_regno (x
);
3365 if (subreg_lowpart_p (x
))
3366 offset
= byte_lowpart_offset (GET_MODE (x
), GET_MODE (y
));
3368 offset
= SUBREG_BYTE (x
);
3369 *xp
= gen_rtx_REG_offset (y
, GET_MODE (x
), regno
, offset
);
3376 /* Do alter_subreg on all the SUBREGs contained in X. */
3379 walk_alter_subreg (rtx
*xp
, bool *changed
)
3382 switch (GET_CODE (x
))
3387 XEXP (x
, 0) = walk_alter_subreg (&XEXP (x
, 0), changed
);
3388 XEXP (x
, 1) = walk_alter_subreg (&XEXP (x
, 1), changed
);
3393 XEXP (x
, 0) = walk_alter_subreg (&XEXP (x
, 0), changed
);
3398 return alter_subreg (xp
, true);
3409 /* Given BODY, the body of a jump instruction, alter the jump condition
3410 as required by the bits that are set in cc_status.flags.
3411 Not all of the bits there can be handled at this level in all cases.
3413 The value is normally 0.
3414 1 means that the condition has become always true.
3415 -1 means that the condition has become always false.
3416 2 means that COND has been altered. */
3419 alter_cond (rtx cond
)
3423 if (cc_status
.flags
& CC_REVERSED
)
3426 PUT_CODE (cond
, swap_condition (GET_CODE (cond
)));
3429 if (cc_status
.flags
& CC_INVERTED
)
3432 PUT_CODE (cond
, reverse_condition (GET_CODE (cond
)));
3435 if (cc_status
.flags
& CC_NOT_POSITIVE
)
3436 switch (GET_CODE (cond
))
3441 /* Jump becomes unconditional. */
3447 /* Jump becomes no-op. */
3451 PUT_CODE (cond
, EQ
);
3456 PUT_CODE (cond
, NE
);
3464 if (cc_status
.flags
& CC_NOT_NEGATIVE
)
3465 switch (GET_CODE (cond
))
3469 /* Jump becomes unconditional. */
3474 /* Jump becomes no-op. */
3479 PUT_CODE (cond
, EQ
);
3485 PUT_CODE (cond
, NE
);
3493 if (cc_status
.flags
& CC_NO_OVERFLOW
)
3494 switch (GET_CODE (cond
))
3497 /* Jump becomes unconditional. */
3501 PUT_CODE (cond
, EQ
);
3506 PUT_CODE (cond
, NE
);
3511 /* Jump becomes no-op. */
3518 if (cc_status
.flags
& (CC_Z_IN_NOT_N
| CC_Z_IN_N
))
3519 switch (GET_CODE (cond
))
3525 PUT_CODE (cond
, cc_status
.flags
& CC_Z_IN_N
? GE
: LT
);
3530 PUT_CODE (cond
, cc_status
.flags
& CC_Z_IN_N
? LT
: GE
);
3535 if (cc_status
.flags
& CC_NOT_SIGNED
)
3536 /* The flags are valid if signed condition operators are converted
3538 switch (GET_CODE (cond
))
3541 PUT_CODE (cond
, LEU
);
3546 PUT_CODE (cond
, LTU
);
3551 PUT_CODE (cond
, GTU
);
3556 PUT_CODE (cond
, GEU
);
3568 /* Report inconsistency between the assembler template and the operands.
3569 In an `asm', it's the user's fault; otherwise, the compiler's fault. */
3572 output_operand_lossage (const char *cmsgid
, ...)
3576 const char *pfx_str
;
3579 va_start (ap
, cmsgid
);
3581 pfx_str
= this_is_asm_operands
? _("invalid 'asm': ") : "output_operand: ";
3582 fmt_string
= xasprintf ("%s%s", pfx_str
, _(cmsgid
));
3583 new_message
= xvasprintf (fmt_string
, ap
);
3585 if (this_is_asm_operands
)
3586 error_for_asm (this_is_asm_operands
, "%s", new_message
);
3588 internal_error ("%s", new_message
);
3595 /* Output of assembler code from a template, and its subroutines. */
3597 /* Annotate the assembly with a comment describing the pattern and
3598 alternative used. */
3601 output_asm_name (void)
3605 fprintf (asm_out_file
, "\t%s %d\t",
3606 ASM_COMMENT_START
, INSN_UID (debug_insn
));
3608 fprintf (asm_out_file
, "[c=%d",
3609 insn_cost (debug_insn
, optimize_insn_for_speed_p ()));
3610 if (HAVE_ATTR_length
)
3611 fprintf (asm_out_file
, " l=%d",
3612 get_attr_length (debug_insn
));
3613 fprintf (asm_out_file
, "] ");
3615 int num
= INSN_CODE (debug_insn
);
3616 fprintf (asm_out_file
, "%s", insn_data
[num
].name
);
3617 if (insn_data
[num
].n_alternatives
> 1)
3618 fprintf (asm_out_file
, "/%d", which_alternative
);
3620 /* Clear this so only the first assembler insn
3621 of any rtl insn will get the special comment for -dp. */
3626 /* If OP is a REG or MEM and we can find a MEM_EXPR corresponding to it
3627 or its address, return that expr . Set *PADDRESSP to 1 if the expr
3628 corresponds to the address of the object and 0 if to the object. */
3631 get_mem_expr_from_op (rtx op
, int *paddressp
)
3639 return REG_EXPR (op
);
3640 else if (!MEM_P (op
))
3643 if (MEM_EXPR (op
) != 0)
3644 return MEM_EXPR (op
);
3646 /* Otherwise we have an address, so indicate it and look at the address. */
3650 /* First check if we have a decl for the address, then look at the right side
3651 if it is a PLUS. Otherwise, strip off arithmetic and keep looking.
3652 But don't allow the address to itself be indirect. */
3653 if ((expr
= get_mem_expr_from_op (op
, &inner_addressp
)) && ! inner_addressp
)
3655 else if (GET_CODE (op
) == PLUS
3656 && (expr
= get_mem_expr_from_op (XEXP (op
, 1), &inner_addressp
)))
3660 || GET_RTX_CLASS (GET_CODE (op
)) == RTX_BIN_ARITH
)
3663 expr
= get_mem_expr_from_op (op
, &inner_addressp
);
3664 return inner_addressp
? 0 : expr
;
3667 /* Output operand names for assembler instructions. OPERANDS is the
3668 operand vector, OPORDER is the order to write the operands, and NOPS
3669 is the number of operands to write. */
3672 output_asm_operand_names (rtx
*operands
, int *oporder
, int nops
)
3677 for (i
= 0; i
< nops
; i
++)
3680 rtx op
= operands
[oporder
[i
]];
3681 tree expr
= get_mem_expr_from_op (op
, &addressp
);
3683 fprintf (asm_out_file
, "%c%s",
3684 wrote
? ',' : '\t', wrote
? "" : ASM_COMMENT_START
);
3688 fprintf (asm_out_file
, "%s",
3689 addressp
? "*" : "");
3690 print_mem_expr (asm_out_file
, expr
);
3693 else if (REG_P (op
) && ORIGINAL_REGNO (op
)
3694 && ORIGINAL_REGNO (op
) != REGNO (op
))
3695 fprintf (asm_out_file
, " tmp%i", ORIGINAL_REGNO (op
));
3699 #ifdef ASSEMBLER_DIALECT
3700 /* Helper function to parse assembler dialects in the asm string.
3701 This is called from output_asm_insn and asm_fprintf. */
3703 do_assembler_dialects (const char *p
, int *dialect
)
3714 output_operand_lossage ("nested assembly dialect alternatives");
3718 /* If we want the first dialect, do nothing. Otherwise, skip
3719 DIALECT_NUMBER of strings ending with '|'. */
3720 for (i
= 0; i
< dialect_number
; i
++)
3722 while (*p
&& *p
!= '}')
3730 /* Skip over any character after a percent sign. */
3742 output_operand_lossage ("unterminated assembly dialect alternative");
3749 /* Skip to close brace. */
3754 output_operand_lossage ("unterminated assembly dialect alternative");
3758 /* Skip over any character after a percent sign. */
3759 if (*p
== '%' && p
[1])
3773 putc (c
, asm_out_file
);
3778 putc (c
, asm_out_file
);
3789 /* Output text from TEMPLATE to the assembler output file,
3790 obeying %-directions to substitute operands taken from
3791 the vector OPERANDS.
3793 %N (for N a digit) means print operand N in usual manner.
3794 %lN means require operand N to be a CODE_LABEL or LABEL_REF
3795 and print the label name with no punctuation.
3796 %cN means require operand N to be a constant
3797 and print the constant expression with no punctuation.
3798 %aN means expect operand N to be a memory address
3799 (not a memory reference!) and print a reference
3801 %nN means expect operand N to be a constant
3802 and print a constant expression for minus the value
3803 of the operand, with no other punctuation. */
3806 output_asm_insn (const char *templ
, rtx
*operands
)
3810 #ifdef ASSEMBLER_DIALECT
3813 int oporder
[MAX_RECOG_OPERANDS
];
3814 char opoutput
[MAX_RECOG_OPERANDS
];
3817 /* An insn may return a null string template
3818 in a case where no assembler code is needed. */
3822 memset (opoutput
, 0, sizeof opoutput
);
3824 putc ('\t', asm_out_file
);
3826 #ifdef ASM_OUTPUT_OPCODE
3827 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
3834 if (flag_verbose_asm
)
3835 output_asm_operand_names (operands
, oporder
, ops
);
3836 if (flag_print_asm_name
)
3840 memset (opoutput
, 0, sizeof opoutput
);
3842 putc (c
, asm_out_file
);
3843 #ifdef ASM_OUTPUT_OPCODE
3844 while ((c
= *p
) == '\t')
3846 putc (c
, asm_out_file
);
3849 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
3853 #ifdef ASSEMBLER_DIALECT
3857 p
= do_assembler_dialects (p
, &dialect
);
3862 /* %% outputs a single %. %{, %} and %| print {, } and | respectively
3863 if ASSEMBLER_DIALECT defined and these characters have a special
3864 meaning as dialect delimiters.*/
3866 #ifdef ASSEMBLER_DIALECT
3867 || *p
== '{' || *p
== '}' || *p
== '|'
3871 putc (*p
, asm_out_file
);
3874 /* %= outputs a number which is unique to each insn in the entire
3875 compilation. This is useful for making local labels that are
3876 referred to more than once in a given insn. */
3880 fprintf (asm_out_file
, "%d", insn_counter
);
3882 /* % followed by a letter and some digits
3883 outputs an operand in a special way depending on the letter.
3884 Letters `acln' are implemented directly.
3885 Other letters are passed to `output_operand' so that
3886 the TARGET_PRINT_OPERAND hook can define them. */
3887 else if (ISALPHA (*p
))
3890 unsigned long opnum
;
3893 opnum
= strtoul (p
, &endptr
, 10);
3896 output_operand_lossage ("operand number missing "
3898 else if (this_is_asm_operands
&& opnum
>= insn_noperands
)
3899 output_operand_lossage ("operand number out of range");
3900 else if (letter
== 'l')
3901 output_asm_label (operands
[opnum
]);
3902 else if (letter
== 'a')
3903 output_address (VOIDmode
, operands
[opnum
]);
3904 else if (letter
== 'c')
3906 if (CONSTANT_ADDRESS_P (operands
[opnum
]))
3907 output_addr_const (asm_out_file
, operands
[opnum
]);
3909 output_operand (operands
[opnum
], 'c');
3911 else if (letter
== 'n')
3913 if (CONST_INT_P (operands
[opnum
]))
3914 fprintf (asm_out_file
, HOST_WIDE_INT_PRINT_DEC
,
3915 - INTVAL (operands
[opnum
]));
3918 putc ('-', asm_out_file
);
3919 output_addr_const (asm_out_file
, operands
[opnum
]);
3923 output_operand (operands
[opnum
], letter
);
3925 if (!opoutput
[opnum
])
3926 oporder
[ops
++] = opnum
;
3927 opoutput
[opnum
] = 1;
3932 /* % followed by a digit outputs an operand the default way. */
3933 else if (ISDIGIT (*p
))
3935 unsigned long opnum
;
3938 opnum
= strtoul (p
, &endptr
, 10);
3939 if (this_is_asm_operands
&& opnum
>= insn_noperands
)
3940 output_operand_lossage ("operand number out of range");
3942 output_operand (operands
[opnum
], 0);
3944 if (!opoutput
[opnum
])
3945 oporder
[ops
++] = opnum
;
3946 opoutput
[opnum
] = 1;
3951 /* % followed by punctuation: output something for that
3952 punctuation character alone, with no operand. The
3953 TARGET_PRINT_OPERAND hook decides what is actually done. */
3954 else if (targetm
.asm_out
.print_operand_punct_valid_p ((unsigned char) *p
))
3955 output_operand (NULL_RTX
, *p
++);
3957 output_operand_lossage ("invalid %%-code");
3961 putc (c
, asm_out_file
);
3964 /* Try to keep the asm a bit more readable. */
3965 if ((flag_verbose_asm
|| flag_print_asm_name
) && strlen (templ
) < 9)
3966 putc ('\t', asm_out_file
);
3968 /* Write out the variable names for operands, if we know them. */
3969 if (flag_verbose_asm
)
3970 output_asm_operand_names (operands
, oporder
, ops
);
3971 if (flag_print_asm_name
)
3974 putc ('\n', asm_out_file
);
3977 /* Output a LABEL_REF, or a bare CODE_LABEL, as an assembler symbol. */
3980 output_asm_label (rtx x
)
3984 if (GET_CODE (x
) == LABEL_REF
)
3985 x
= label_ref_label (x
);
3988 && NOTE_KIND (x
) == NOTE_INSN_DELETED_LABEL
))
3989 ASM_GENERATE_INTERNAL_LABEL (buf
, "L", CODE_LABEL_NUMBER (x
));
3991 output_operand_lossage ("'%%l' operand isn't a label");
3993 assemble_name (asm_out_file
, buf
);
3996 /* Marks SYMBOL_REFs in x as referenced through use of assemble_external. */
3999 mark_symbol_refs_as_used (rtx x
)
4001 subrtx_iterator::array_type array
;
4002 FOR_EACH_SUBRTX (iter
, array
, x
, ALL
)
4004 const_rtx x
= *iter
;
4005 if (GET_CODE (x
) == SYMBOL_REF
)
4006 if (tree t
= SYMBOL_REF_DECL (x
))
4007 assemble_external (t
);
4011 /* Print operand X using machine-dependent assembler syntax.
4012 CODE is a non-digit that preceded the operand-number in the % spec,
4013 such as 'z' if the spec was `%z3'. CODE is 0 if there was no char
4014 between the % and the digits.
4015 When CODE is a non-letter, X is 0.
4017 The meanings of the letters are machine-dependent and controlled
4018 by TARGET_PRINT_OPERAND. */
4021 output_operand (rtx x
, int code ATTRIBUTE_UNUSED
)
4023 if (x
&& GET_CODE (x
) == SUBREG
)
4024 x
= alter_subreg (&x
, true);
4026 /* X must not be a pseudo reg. */
4027 if (!targetm
.no_register_allocation
)
4028 gcc_assert (!x
|| !REG_P (x
) || REGNO (x
) < FIRST_PSEUDO_REGISTER
);
4030 targetm
.asm_out
.print_operand (asm_out_file
, x
, code
);
4035 mark_symbol_refs_as_used (x
);
4038 /* Print a memory reference operand for address X using
4039 machine-dependent assembler syntax. */
4042 output_address (machine_mode mode
, rtx x
)
4044 bool changed
= false;
4045 walk_alter_subreg (&x
, &changed
);
4046 targetm
.asm_out
.print_operand_address (asm_out_file
, mode
, x
);
4049 /* Print an integer constant expression in assembler syntax.
4050 Addition and subtraction are the only arithmetic
4051 that may appear in these expressions. */
4054 output_addr_const (FILE *file
, rtx x
)
4059 switch (GET_CODE (x
))
4066 if (SYMBOL_REF_DECL (x
))
4067 assemble_external (SYMBOL_REF_DECL (x
));
4068 #ifdef ASM_OUTPUT_SYMBOL_REF
4069 ASM_OUTPUT_SYMBOL_REF (file
, x
);
4071 assemble_name (file
, XSTR (x
, 0));
4076 x
= label_ref_label (x
);
4079 ASM_GENERATE_INTERNAL_LABEL (buf
, "L", CODE_LABEL_NUMBER (x
));
4080 #ifdef ASM_OUTPUT_LABEL_REF
4081 ASM_OUTPUT_LABEL_REF (file
, buf
);
4083 assemble_name (file
, buf
);
4088 fprintf (file
, HOST_WIDE_INT_PRINT_DEC
, INTVAL (x
));
4092 /* This used to output parentheses around the expression,
4093 but that does not work on the 386 (either ATT or BSD assembler). */
4094 output_addr_const (file
, XEXP (x
, 0));
4097 case CONST_WIDE_INT
:
4098 /* We do not know the mode here so we have to use a round about
4099 way to build a wide-int to get it printed properly. */
4101 wide_int w
= wide_int::from_array (&CONST_WIDE_INT_ELT (x
, 0),
4102 CONST_WIDE_INT_NUNITS (x
),
4103 CONST_WIDE_INT_NUNITS (x
)
4104 * HOST_BITS_PER_WIDE_INT
,
4106 print_decs (w
, file
);
4111 if (CONST_DOUBLE_AS_INT_P (x
))
4113 /* We can use %d if the number is one word and positive. */
4114 if (CONST_DOUBLE_HIGH (x
))
4115 fprintf (file
, HOST_WIDE_INT_PRINT_DOUBLE_HEX
,
4116 (unsigned HOST_WIDE_INT
) CONST_DOUBLE_HIGH (x
),
4117 (unsigned HOST_WIDE_INT
) CONST_DOUBLE_LOW (x
));
4118 else if (CONST_DOUBLE_LOW (x
) < 0)
4119 fprintf (file
, HOST_WIDE_INT_PRINT_HEX
,
4120 (unsigned HOST_WIDE_INT
) CONST_DOUBLE_LOW (x
));
4122 fprintf (file
, HOST_WIDE_INT_PRINT_DEC
, CONST_DOUBLE_LOW (x
));
4125 /* We can't handle floating point constants;
4126 PRINT_OPERAND must handle them. */
4127 output_operand_lossage ("floating constant misused");
4131 fprintf (file
, HOST_WIDE_INT_PRINT_DEC
, CONST_FIXED_VALUE_LOW (x
));
4135 /* Some assemblers need integer constants to appear last (eg masm). */
4136 if (CONST_INT_P (XEXP (x
, 0)))
4138 output_addr_const (file
, XEXP (x
, 1));
4139 if (INTVAL (XEXP (x
, 0)) >= 0)
4140 fprintf (file
, "+");
4141 output_addr_const (file
, XEXP (x
, 0));
4145 output_addr_const (file
, XEXP (x
, 0));
4146 if (!CONST_INT_P (XEXP (x
, 1))
4147 || INTVAL (XEXP (x
, 1)) >= 0)
4148 fprintf (file
, "+");
4149 output_addr_const (file
, XEXP (x
, 1));
4154 /* Avoid outputting things like x-x or x+5-x,
4155 since some assemblers can't handle that. */
4156 x
= simplify_subtraction (x
);
4157 if (GET_CODE (x
) != MINUS
)
4160 output_addr_const (file
, XEXP (x
, 0));
4161 fprintf (file
, "-");
4162 if ((CONST_INT_P (XEXP (x
, 1)) && INTVAL (XEXP (x
, 1)) >= 0)
4163 || GET_CODE (XEXP (x
, 1)) == PC
4164 || GET_CODE (XEXP (x
, 1)) == SYMBOL_REF
)
4165 output_addr_const (file
, XEXP (x
, 1));
4168 fputs (targetm
.asm_out
.open_paren
, file
);
4169 output_addr_const (file
, XEXP (x
, 1));
4170 fputs (targetm
.asm_out
.close_paren
, file
);
4178 output_addr_const (file
, XEXP (x
, 0));
4182 if (targetm
.asm_out
.output_addr_const_extra (file
, x
))
4185 output_operand_lossage ("invalid expression as operand");
4189 /* Output a quoted string. */
4192 output_quoted_string (FILE *asm_file
, const char *string
)
4194 #ifdef OUTPUT_QUOTED_STRING
4195 OUTPUT_QUOTED_STRING (asm_file
, string
);
4199 putc ('\"', asm_file
);
4200 while ((c
= *string
++) != 0)
4204 if (c
== '\"' || c
== '\\')
4205 putc ('\\', asm_file
);
4209 fprintf (asm_file
, "\\%03o", (unsigned char) c
);
4211 putc ('\"', asm_file
);
4215 /* Write a HOST_WIDE_INT number in hex form 0x1234, fast. */
4218 fprint_whex (FILE *f
, unsigned HOST_WIDE_INT value
)
4220 char buf
[2 + CHAR_BIT
* sizeof (value
) / 4];
4225 char *p
= buf
+ sizeof (buf
);
4227 *--p
= "0123456789abcdef"[value
% 16];
4228 while ((value
/= 16) != 0);
4231 fwrite (p
, 1, buf
+ sizeof (buf
) - p
, f
);
4235 /* Internal function that prints an unsigned long in decimal in reverse.
4236 The output string IS NOT null-terminated. */
4239 sprint_ul_rev (char *s
, unsigned long value
)
4244 s
[i
] = "0123456789"[value
% 10];
4247 /* alternate version, without modulo */
4248 /* oldval = value; */
4250 /* s[i] = "0123456789" [oldval - 10*value]; */
4257 /* Write an unsigned long as decimal to a file, fast. */
4260 fprint_ul (FILE *f
, unsigned long value
)
4262 /* python says: len(str(2**64)) == 20 */
4266 i
= sprint_ul_rev (s
, value
);
4268 /* It's probably too small to bother with string reversal and fputs. */
4277 /* Write an unsigned long as decimal to a string, fast.
4278 s must be wide enough to not overflow, at least 21 chars.
4279 Returns the length of the string (without terminating '\0'). */
4282 sprint_ul (char *s
, unsigned long value
)
4284 int len
= sprint_ul_rev (s
, value
);
4287 std::reverse (s
, s
+ len
);
4291 /* A poor man's fprintf, with the added features of %I, %R, %L, and %U.
4292 %R prints the value of REGISTER_PREFIX.
4293 %L prints the value of LOCAL_LABEL_PREFIX.
4294 %U prints the value of USER_LABEL_PREFIX.
4295 %I prints the value of IMMEDIATE_PREFIX.
4296 %O runs ASM_OUTPUT_OPCODE to transform what follows in the string.
4297 Also supported are %d, %i, %u, %x, %X, %o, %c, %s and %%.
4299 We handle alternate assembler dialects here, just like output_asm_insn. */
4302 asm_fprintf (FILE *file
, const char *p
, ...)
4306 #ifdef ASSEMBLER_DIALECT
4311 va_start (argptr
, p
);
4318 #ifdef ASSEMBLER_DIALECT
4322 p
= do_assembler_dialects (p
, &dialect
);
4329 while (strchr ("-+ #0", c
))
4334 while (ISDIGIT (c
) || c
== '.')
4345 case 'd': case 'i': case 'u':
4346 case 'x': case 'X': case 'o':
4350 fprintf (file
, buf
, va_arg (argptr
, int));
4354 /* This is a prefix to the 'd', 'i', 'u', 'x', 'X', and
4355 'o' cases, but we do not check for those cases. It
4356 means that the value is a HOST_WIDE_INT, which may be
4357 either `long' or `long long'. */
4358 memcpy (q
, HOST_WIDE_INT_PRINT
, strlen (HOST_WIDE_INT_PRINT
));
4359 q
+= strlen (HOST_WIDE_INT_PRINT
);
4362 fprintf (file
, buf
, va_arg (argptr
, HOST_WIDE_INT
));
4367 #ifdef HAVE_LONG_LONG
4373 fprintf (file
, buf
, va_arg (argptr
, long long));
4380 fprintf (file
, buf
, va_arg (argptr
, long));
4388 fprintf (file
, buf
, va_arg (argptr
, char *));
4392 #ifdef ASM_OUTPUT_OPCODE
4393 ASM_OUTPUT_OPCODE (asm_out_file
, p
);
4398 #ifdef REGISTER_PREFIX
4399 fprintf (file
, "%s", REGISTER_PREFIX
);
4404 #ifdef IMMEDIATE_PREFIX
4405 fprintf (file
, "%s", IMMEDIATE_PREFIX
);
4410 #ifdef LOCAL_LABEL_PREFIX
4411 fprintf (file
, "%s", LOCAL_LABEL_PREFIX
);
4416 fputs (user_label_prefix
, file
);
4419 #ifdef ASM_FPRINTF_EXTENSIONS
4420 /* Uppercase letters are reserved for general use by asm_fprintf
4421 and so are not available to target specific code. In order to
4422 prevent the ASM_FPRINTF_EXTENSIONS macro from using them then,
4423 they are defined here. As they get turned into real extensions
4424 to asm_fprintf they should be removed from this list. */
4425 case 'A': case 'B': case 'C': case 'D': case 'E':
4426 case 'F': case 'G': case 'H': case 'J': case 'K':
4427 case 'M': case 'N': case 'P': case 'Q': case 'S':
4428 case 'T': case 'V': case 'W': case 'Y': case 'Z':
4431 ASM_FPRINTF_EXTENSIONS (file
, argptr
, p
)
4444 /* Return nonzero if this function has no function calls. */
4447 leaf_function_p (void)
4451 /* Ensure we walk the entire function body. */
4452 gcc_assert (!in_sequence_p ());
4454 /* Some back-ends (e.g. s390) want leaf functions to stay leaf
4455 functions even if they call mcount. */
4456 if (crtl
->profile
&& !targetm
.keep_leaf_when_profiled ())
4459 for (insn
= get_insns (); insn
; insn
= NEXT_INSN (insn
))
4462 && ! SIBLING_CALL_P (insn
))
4464 if (NONJUMP_INSN_P (insn
)
4465 && GET_CODE (PATTERN (insn
)) == SEQUENCE
4466 && CALL_P (XVECEXP (PATTERN (insn
), 0, 0))
4467 && ! SIBLING_CALL_P (XVECEXP (PATTERN (insn
), 0, 0)))
4474 /* Return 1 if branch is a forward branch.
4475 Uses insn_shuid array, so it works only in the final pass. May be used by
4476 output templates to customary add branch prediction hints.
4479 final_forward_branch_p (rtx_insn
*insn
)
4481 int insn_id
, label_id
;
4483 gcc_assert (uid_shuid
);
4484 insn_id
= INSN_SHUID (insn
);
4485 label_id
= INSN_SHUID (JUMP_LABEL (insn
));
4486 /* We've hit some insns that does not have id information available. */
4487 gcc_assert (insn_id
&& label_id
);
4488 return insn_id
< label_id
;
4491 /* On some machines, a function with no call insns
4492 can run faster if it doesn't create its own register window.
4493 When output, the leaf function should use only the "output"
4494 registers. Ordinarily, the function would be compiled to use
4495 the "input" registers to find its arguments; it is a candidate
4496 for leaf treatment if it uses only the "input" registers.
4497 Leaf function treatment means renumbering so the function
4498 uses the "output" registers instead. */
4500 #ifdef LEAF_REGISTERS
4502 /* Return 1 if this function uses only the registers that can be
4503 safely renumbered. */
4506 only_leaf_regs_used (void)
4509 const char *const permitted_reg_in_leaf_functions
= LEAF_REGISTERS
;
4511 for (i
= 0; i
< FIRST_PSEUDO_REGISTER
; i
++)
4512 if ((df_regs_ever_live_p (i
) || global_regs
[i
])
4513 && ! permitted_reg_in_leaf_functions
[i
])
4516 if (crtl
->uses_pic_offset_table
4517 && pic_offset_table_rtx
!= 0
4518 && REG_P (pic_offset_table_rtx
)
4519 && ! permitted_reg_in_leaf_functions
[REGNO (pic_offset_table_rtx
)])
4525 /* Scan all instructions and renumber all registers into those
4526 available in leaf functions. */
4529 leaf_renumber_regs (rtx_insn
*first
)
4533 /* Renumber only the actual patterns.
4534 The reg-notes can contain frame pointer refs,
4535 and renumbering them could crash, and should not be needed. */
4536 for (insn
= first
; insn
; insn
= NEXT_INSN (insn
))
4538 leaf_renumber_regs_insn (PATTERN (insn
));
4541 /* Scan IN_RTX and its subexpressions, and renumber all regs into those
4542 available in leaf functions. */
4545 leaf_renumber_regs_insn (rtx in_rtx
)
4548 const char *format_ptr
;
4553 /* Renumber all input-registers into output-registers.
4554 renumbered_regs would be 1 for an output-register;
4561 /* Don't renumber the same reg twice. */
4565 newreg
= REGNO (in_rtx
);
4566 /* Don't try to renumber pseudo regs. It is possible for a pseudo reg
4567 to reach here as part of a REG_NOTE. */
4568 if (newreg
>= FIRST_PSEUDO_REGISTER
)
4573 newreg
= LEAF_REG_REMAP (newreg
);
4574 gcc_assert (newreg
>= 0);
4575 df_set_regs_ever_live (REGNO (in_rtx
), false);
4576 df_set_regs_ever_live (newreg
, true);
4577 SET_REGNO (in_rtx
, newreg
);
4582 if (INSN_P (in_rtx
))
4584 /* Inside a SEQUENCE, we find insns.
4585 Renumber just the patterns of these insns,
4586 just as we do for the top-level insns. */
4587 leaf_renumber_regs_insn (PATTERN (in_rtx
));
4591 format_ptr
= GET_RTX_FORMAT (GET_CODE (in_rtx
));
4593 for (i
= 0; i
< GET_RTX_LENGTH (GET_CODE (in_rtx
)); i
++)
4594 switch (*format_ptr
++)
4597 leaf_renumber_regs_insn (XEXP (in_rtx
, i
));
4601 if (XVEC (in_rtx
, i
) != NULL
)
4602 for (j
= 0; j
< XVECLEN (in_rtx
, i
); j
++)
4603 leaf_renumber_regs_insn (XVECEXP (in_rtx
, i
, j
));
4622 /* Turn the RTL into assembly. */
4624 rest_of_handle_final (void)
4626 const char *fnname
= get_fnname_from_decl (current_function_decl
);
4628 /* Turn debug markers into notes if the var-tracking pass has not
4630 if (!flag_var_tracking
&& MAY_HAVE_DEBUG_MARKER_INSNS
)
4631 delete_vta_debug_insns (false);
4633 assemble_start_function (current_function_decl
, fnname
);
4634 rtx_insn
*first
= get_insns ();
4636 final_start_function_1 (&first
, asm_out_file
, &seen
, optimize
);
4637 final_1 (first
, asm_out_file
, seen
, optimize
);
4639 && !lookup_attribute ("noipa", DECL_ATTRIBUTES (current_function_decl
)))
4640 collect_fn_hard_reg_usage ();
4641 final_end_function ();
4643 /* The IA-64 ".handlerdata" directive must be issued before the ".endp"
4644 directive that closes the procedure descriptor. Similarly, for x64 SEH.
4645 Otherwise it's not strictly necessary, but it doesn't hurt either. */
4646 output_function_exception_table (fnname
);
4648 assemble_end_function (current_function_decl
, fnname
);
4650 /* Free up reg info memory. */
4654 fflush (asm_out_file
);
4656 /* Write DBX symbols if requested. */
4658 /* Note that for those inline functions where we don't initially
4659 know for certain that we will be generating an out-of-line copy,
4660 the first invocation of this routine (rest_of_compilation) will
4661 skip over this code by doing a `goto exit_rest_of_compilation;'.
4662 Later on, wrapup_global_declarations will (indirectly) call
4663 rest_of_compilation again for those inline functions that need
4664 to have out-of-line copies generated. During that call, we
4665 *will* be routed past here. */
4667 timevar_push (TV_SYMOUT
);
4668 if (!DECL_IGNORED_P (current_function_decl
))
4669 debug_hooks
->function_decl (current_function_decl
);
4670 timevar_pop (TV_SYMOUT
);
4672 /* Release the blocks that are linked to DECL_INITIAL() to free the memory. */
4673 DECL_INITIAL (current_function_decl
) = error_mark_node
;
4675 if (DECL_STATIC_CONSTRUCTOR (current_function_decl
)
4676 && targetm
.have_ctors_dtors
)
4677 targetm
.asm_out
.constructor (XEXP (DECL_RTL (current_function_decl
), 0),
4678 decl_init_priority_lookup
4679 (current_function_decl
));
4680 if (DECL_STATIC_DESTRUCTOR (current_function_decl
)
4681 && targetm
.have_ctors_dtors
)
4682 targetm
.asm_out
.destructor (XEXP (DECL_RTL (current_function_decl
), 0),
4683 decl_fini_priority_lookup
4684 (current_function_decl
));
4690 const pass_data pass_data_final
=
4692 RTL_PASS
, /* type */
4694 OPTGROUP_NONE
, /* optinfo_flags */
4695 TV_FINAL
, /* tv_id */
4696 0, /* properties_required */
4697 0, /* properties_provided */
4698 0, /* properties_destroyed */
4699 0, /* todo_flags_start */
4700 0, /* todo_flags_finish */
4703 class pass_final
: public rtl_opt_pass
4706 pass_final (gcc::context
*ctxt
)
4707 : rtl_opt_pass (pass_data_final
, ctxt
)
4710 /* opt_pass methods: */
4711 virtual unsigned int execute (function
*) { return rest_of_handle_final (); }
4713 }; // class pass_final
4718 make_pass_final (gcc::context
*ctxt
)
4720 return new pass_final (ctxt
);
4725 rest_of_handle_shorten_branches (void)
4727 /* Shorten branches. */
4728 shorten_branches (get_insns ());
4734 const pass_data pass_data_shorten_branches
=
4736 RTL_PASS
, /* type */
4737 "shorten", /* name */
4738 OPTGROUP_NONE
, /* optinfo_flags */
4739 TV_SHORTEN_BRANCH
, /* tv_id */
4740 0, /* properties_required */
4741 0, /* properties_provided */
4742 0, /* properties_destroyed */
4743 0, /* todo_flags_start */
4744 0, /* todo_flags_finish */
4747 class pass_shorten_branches
: public rtl_opt_pass
4750 pass_shorten_branches (gcc::context
*ctxt
)
4751 : rtl_opt_pass (pass_data_shorten_branches
, ctxt
)
4754 /* opt_pass methods: */
4755 virtual unsigned int execute (function
*)
4757 return rest_of_handle_shorten_branches ();
4760 }; // class pass_shorten_branches
4765 make_pass_shorten_branches (gcc::context
*ctxt
)
4767 return new pass_shorten_branches (ctxt
);
4772 rest_of_clean_state (void)
4774 rtx_insn
*insn
, *next
;
4775 FILE *final_output
= NULL
;
4776 int save_unnumbered
= flag_dump_unnumbered
;
4777 int save_noaddr
= flag_dump_noaddr
;
4779 if (flag_dump_final_insns
)
4781 final_output
= fopen (flag_dump_final_insns
, "a");
4784 error ("could not open final insn dump file %qs: %m",
4785 flag_dump_final_insns
);
4786 flag_dump_final_insns
= NULL
;
4790 flag_dump_noaddr
= flag_dump_unnumbered
= 1;
4791 if (flag_compare_debug_opt
|| flag_compare_debug
)
4792 dump_flags
|= TDF_NOUID
| TDF_COMPARE_DEBUG
;
4793 dump_function_header (final_output
, current_function_decl
,
4795 final_insns_dump_p
= true;
4797 for (insn
= get_insns (); insn
; insn
= NEXT_INSN (insn
))
4799 INSN_UID (insn
) = CODE_LABEL_NUMBER (insn
);
4803 set_block_for_insn (insn
, NULL
);
4804 INSN_UID (insn
) = 0;
4809 /* It is very important to decompose the RTL instruction chain here:
4810 debug information keeps pointing into CODE_LABEL insns inside the function
4811 body. If these remain pointing to the other insns, we end up preserving
4812 whole RTL chain and attached detailed debug info in memory. */
4813 for (insn
= get_insns (); insn
; insn
= next
)
4815 next
= NEXT_INSN (insn
);
4816 SET_NEXT_INSN (insn
) = NULL
;
4817 SET_PREV_INSN (insn
) = NULL
;
4820 && (!NOTE_P (insn
) ||
4821 (NOTE_KIND (insn
) != NOTE_INSN_VAR_LOCATION
4822 && NOTE_KIND (insn
) != NOTE_INSN_BEGIN_STMT
4823 && NOTE_KIND (insn
) != NOTE_INSN_INLINE_ENTRY
4824 && NOTE_KIND (insn
) != NOTE_INSN_CALL_ARG_LOCATION
4825 && NOTE_KIND (insn
) != NOTE_INSN_BLOCK_BEG
4826 && NOTE_KIND (insn
) != NOTE_INSN_BLOCK_END
4827 && NOTE_KIND (insn
) != NOTE_INSN_DELETED_DEBUG_LABEL
)))
4828 print_rtl_single (final_output
, insn
);
4833 flag_dump_noaddr
= save_noaddr
;
4834 flag_dump_unnumbered
= save_unnumbered
;
4835 final_insns_dump_p
= false;
4837 if (fclose (final_output
))
4839 error ("could not close final insn dump file %qs: %m",
4840 flag_dump_final_insns
);
4841 flag_dump_final_insns
= NULL
;
4845 flag_rerun_cse_after_global_opts
= 0;
4846 reload_completed
= 0;
4847 epilogue_completed
= 0;
4849 regstack_completed
= 0;
4852 /* Clear out the insn_length contents now that they are no
4854 init_insn_lengths ();
4856 /* Show no temporary slots allocated. */
4859 free_bb_for_insn ();
4861 if (cfun
->gimple_df
)
4862 delete_tree_ssa (cfun
);
4864 /* We can reduce stack alignment on call site only when we are sure that
4865 the function body just produced will be actually used in the final
4867 if (decl_binds_to_current_def_p (current_function_decl
))
4869 unsigned int pref
= crtl
->preferred_stack_boundary
;
4870 if (crtl
->stack_alignment_needed
> crtl
->preferred_stack_boundary
)
4871 pref
= crtl
->stack_alignment_needed
;
4872 cgraph_node::rtl_info (current_function_decl
)
4873 ->preferred_incoming_stack_boundary
= pref
;
4876 /* Make sure volatile mem refs aren't considered valid operands for
4877 arithmetic insns. We must call this here if this is a nested inline
4878 function, since the above code leaves us in the init_recog state,
4879 and the function context push/pop code does not save/restore volatile_ok.
4881 ??? Maybe it isn't necessary for expand_start_function to call this
4882 anymore if we do it here? */
4884 init_recog_no_volatile ();
4886 /* We're done with this function. Free up memory if we can. */
4887 free_after_parsing (cfun
);
4888 free_after_compilation (cfun
);
4894 const pass_data pass_data_clean_state
=
4896 RTL_PASS
, /* type */
4897 "*clean_state", /* name */
4898 OPTGROUP_NONE
, /* optinfo_flags */
4899 TV_FINAL
, /* tv_id */
4900 0, /* properties_required */
4901 0, /* properties_provided */
4902 PROP_rtl
, /* properties_destroyed */
4903 0, /* todo_flags_start */
4904 0, /* todo_flags_finish */
4907 class pass_clean_state
: public rtl_opt_pass
4910 pass_clean_state (gcc::context
*ctxt
)
4911 : rtl_opt_pass (pass_data_clean_state
, ctxt
)
4914 /* opt_pass methods: */
4915 virtual unsigned int execute (function
*)
4917 return rest_of_clean_state ();
4920 }; // class pass_clean_state
4925 make_pass_clean_state (gcc::context
*ctxt
)
4927 return new pass_clean_state (ctxt
);
4930 /* Return true if INSN is a call to the current function. */
4933 self_recursive_call_p (rtx_insn
*insn
)
4935 tree fndecl
= get_call_fndecl (insn
);
4936 return (fndecl
== current_function_decl
4937 && decl_binds_to_current_def_p (fndecl
));
4940 /* Collect hard register usage for the current function. */
4943 collect_fn_hard_reg_usage (void)
4949 struct cgraph_rtl_info
*node
;
4950 HARD_REG_SET function_used_regs
;
4952 /* ??? To be removed when all the ports have been fixed. */
4953 if (!targetm
.call_fusage_contains_non_callee_clobbers
)
4956 CLEAR_HARD_REG_SET (function_used_regs
);
4958 for (insn
= get_insns (); insn
!= NULL_RTX
; insn
= next_insn (insn
))
4960 HARD_REG_SET insn_used_regs
;
4962 if (!NONDEBUG_INSN_P (insn
))
4966 && !self_recursive_call_p (insn
))
4968 if (!get_call_reg_set_usage (insn
, &insn_used_regs
,
4972 IOR_HARD_REG_SET (function_used_regs
, insn_used_regs
);
4975 find_all_hard_reg_sets (insn
, &insn_used_regs
, false);
4976 IOR_HARD_REG_SET (function_used_regs
, insn_used_regs
);
4979 /* Be conservative - mark fixed and global registers as used. */
4980 IOR_HARD_REG_SET (function_used_regs
, fixed_reg_set
);
4983 /* Handle STACK_REGS conservatively, since the df-framework does not
4984 provide accurate information for them. */
4986 for (i
= FIRST_STACK_REG
; i
<= LAST_STACK_REG
; i
++)
4987 SET_HARD_REG_BIT (function_used_regs
, i
);
4990 /* The information we have gathered is only interesting if it exposes a
4991 register from the call_used_regs that is not used in this function. */
4992 if (hard_reg_set_subset_p (call_used_reg_set
, function_used_regs
))
4995 node
= cgraph_node::rtl_info (current_function_decl
);
4996 gcc_assert (node
!= NULL
);
4998 COPY_HARD_REG_SET (node
->function_used_regs
, function_used_regs
);
4999 node
->function_used_regs_valid
= 1;
5002 /* Get the declaration of the function called by INSN. */
5005 get_call_fndecl (rtx_insn
*insn
)
5009 note
= find_reg_note (insn
, REG_CALL_DECL
, NULL_RTX
);
5010 if (note
== NULL_RTX
)
5013 datum
= XEXP (note
, 0);
5014 if (datum
!= NULL_RTX
)
5015 return SYMBOL_REF_DECL (datum
);
5020 /* Return the cgraph_rtl_info of the function called by INSN. Returns NULL for
5021 call targets that can be overwritten. */
5023 static struct cgraph_rtl_info
*
5024 get_call_cgraph_rtl_info (rtx_insn
*insn
)
5028 if (insn
== NULL_RTX
)
5031 fndecl
= get_call_fndecl (insn
);
5032 if (fndecl
== NULL_TREE
5033 || !decl_binds_to_current_def_p (fndecl
))
5036 return cgraph_node::rtl_info (fndecl
);
5039 /* Find hard registers used by function call instruction INSN, and return them
5040 in REG_SET. Return DEFAULT_SET in REG_SET if not found. */
5043 get_call_reg_set_usage (rtx_insn
*insn
, HARD_REG_SET
*reg_set
,
5044 HARD_REG_SET default_set
)
5048 struct cgraph_rtl_info
*node
= get_call_cgraph_rtl_info (insn
);
5050 && node
->function_used_regs_valid
)
5052 COPY_HARD_REG_SET (*reg_set
, node
->function_used_regs
);
5053 AND_HARD_REG_SET (*reg_set
, default_set
);
5058 COPY_HARD_REG_SET (*reg_set
, default_set
);