1 dnl Process this with autoconf to create configure
5 AC_INIT([libffi], [2.1], [http://gcc.gnu.org/bugs.html])
6 AC_CONFIG_HEADERS([fficonfig.h])
8 AM_ENABLE_MULTILIB(, ..)
11 target_alias=${target_alias-$host_alias}
13 . ${srcdir}/configure.host
17 # The same as in boehm-gc and libstdc++. Have to borrow it from there.
18 # We must force CC to /not/ be precious variables; otherwise
19 # the wrong, non-multilib-adjusted value will be used in multilibs.
20 # As a side effect, we have to subst CFLAGS ourselves.
22 m4_rename([_AC_ARG_VAR_PRECIOUS],[real_PRECIOUS])
23 m4_define([_AC_ARG_VAR_PRECIOUS],[])
25 m4_rename([real_PRECIOUS],[_AC_ARG_VAR_PRECIOUS])
35 AC_CHECK_HEADERS(sys/mman.h)
37 AC_FUNC_MMAP_BLACKLIST
39 dnl The -no-testsuite modules omit the test subdir.
40 AM_CONDITIONAL(TESTSUBDIR, test -d $srcdir/testsuite)
45 TARGET=ALPHA; TARGETDIR=alpha;
46 # Support 128-bit long double, changable via command-line switch.
47 HAVE_LONG_DOUBLE='defined(__LONG_DOUBLE_128__)'
51 TARGET=ARM; TARGETDIR=arm
55 TARGET=X86_64; TARGETDIR=x86
59 TARGET=LIBFFI_CRIS; TARGETDIR=cris
63 TARGET=FRV; TARGETDIR=frv
66 hppa*-*-linux* | parisc*-*-linux*)
67 TARGET=PA_LINUX; TARGETDIR=pa
70 TARGET=PA64_HPUX; TARGETDIR=pa
73 TARGET=PA_HPUX; TARGETDIR=pa
76 i?86-win32* | i?86-*-cygwin* | i?86-*-mingw*)
77 TARGET=X86_WIN32; TARGETDIR=x86
80 TARGET=X86_DARWIN; TARGETDIR=x86
82 i?86-*-solaris2.1[[0-9]]*)
83 TARGET=X86_64; TARGETDIR=x86
86 TARGET=X86; TARGETDIR=x86
90 TARGET=IA64; TARGETDIR=ia64
94 TARGET=M32R; TARGETDIR=m32r
98 TARGET=M68K; TARGETDIR=m68k
101 mips-sgi-irix5.* | mips-sgi-irix6.*)
102 TARGET=MIPS; TARGETDIR=mips
105 TARGET=MIPS; TARGETDIR=mips
108 powerpc*-*-linux* | powerpc-*-sysv*)
109 TARGET=POWERPC; TARGETDIR=powerpc
112 TARGET=POWERPC; TARGETDIR=powerpc
115 TARGET=POWERPC_DARWIN; TARGETDIR=powerpc
117 powerpc-*-aix* | rs6000-*-aix*)
118 TARGET=POWERPC_AIX; TARGETDIR=powerpc
121 TARGET=POWERPC_FREEBSD; TARGETDIR=powerpc
124 TARGET=POWERPC; TARGETDIR=powerpc
127 s390-*-* | s390x-*-*)
128 TARGET=S390; TARGETDIR=s390
131 sh-*-* | sh[[34]]*-*-*)
132 TARGET=SH; TARGETDIR=sh
135 TARGET=SH64; TARGETDIR=sh64
139 TARGET=SPARC; TARGETDIR=sparc
143 TARGET=X86_DARWIN; TARGETDIR=x86
145 x86_64-*-cygwin* | x86_64-*-mingw*)
148 TARGET=X86_64; TARGETDIR=x86
152 AC_SUBST(AM_RUNTESTFLAGS)
154 if test $TARGETDIR = unknown; then
155 AC_MSG_ERROR(["libffi has not been ported to $host."])
158 AM_CONDITIONAL(MIPS, test x$TARGET = xMIPS)
159 AM_CONDITIONAL(SPARC, test x$TARGET = xSPARC)
160 AM_CONDITIONAL(X86, test x$TARGET = xX86)
161 AM_CONDITIONAL(X86_WIN32, test x$TARGET = xX86_WIN32)
162 AM_CONDITIONAL(X86_DARWIN, test x$TARGET = xX86_DARWIN)
163 AM_CONDITIONAL(ALPHA, test x$TARGET = xALPHA)
164 AM_CONDITIONAL(IA64, test x$TARGET = xIA64)
165 AM_CONDITIONAL(M32R, test x$TARGET = xM32R)
166 AM_CONDITIONAL(M68K, test x$TARGET = xM68K)
167 AM_CONDITIONAL(POWERPC, test x$TARGET = xPOWERPC)
168 AM_CONDITIONAL(POWERPC_AIX, test x$TARGET = xPOWERPC_AIX)
169 AM_CONDITIONAL(POWERPC_DARWIN, test x$TARGET = xPOWERPC_DARWIN)
170 AM_CONDITIONAL(POWERPC_FREEBSD, test x$TARGET = xPOWERPC_FREEBSD)
171 AM_CONDITIONAL(ARM, test x$TARGET = xARM)
172 AM_CONDITIONAL(LIBFFI_CRIS, test x$TARGET = xLIBFFI_CRIS)
173 AM_CONDITIONAL(FRV, test x$TARGET = xFRV)
174 AM_CONDITIONAL(S390, test x$TARGET = xS390)
175 AM_CONDITIONAL(X86_64, test x$TARGET = xX86_64)
176 AM_CONDITIONAL(SH, test x$TARGET = xSH)
177 AM_CONDITIONAL(SH64, test x$TARGET = xSH64)
178 AM_CONDITIONAL(PA_LINUX, test x$TARGET = xPA_LINUX)
179 AM_CONDITIONAL(PA_HPUX, test x$TARGET = xPA_HPUX)
180 AM_CONDITIONAL(PA64_HPUX, test x$TARGET = xPA64_HPUX)
183 AC_CHECK_FUNCS(memcpy)
186 AC_CHECK_SIZEOF(double)
187 AC_CHECK_SIZEOF(long double)
189 # Also AC_SUBST this variable for ffi.h.
190 if test -z "$HAVE_LONG_DOUBLE"; then
192 if test $ac_cv_sizeof_double != $ac_cv_sizeof_long_double; then
193 if test $ac_cv_sizeof_long_double != 0; then
195 AC_DEFINE(HAVE_LONG_DOUBLE, 1, [Define if you have the long double type and it is bigger than a double])
199 AC_SUBST(HAVE_LONG_DOUBLE)
203 AC_CACHE_CHECK([assembler .cfi pseudo-op support],
204 libffi_cv_as_cfi_pseudo_op, [
205 libffi_cv_as_cfi_pseudo_op=unknown
206 AC_TRY_COMPILE([asm (".cfi_startproc\n\t.cfi_endproc");],,
207 [libffi_cv_as_cfi_pseudo_op=yes],
208 [libffi_cv_as_cfi_pseudo_op=no])
210 if test "x$libffi_cv_as_cfi_pseudo_op" = xyes; then
211 AC_DEFINE(HAVE_AS_CFI_PSEUDO_OP, 1,
212 [Define if your assembler supports .cfi_* directives.])
215 if test x$TARGET = xSPARC; then
216 AC_CACHE_CHECK([assembler and linker support unaligned pc related relocs],
217 libffi_cv_as_sparc_ua_pcrel, [
218 save_CFLAGS="$CFLAGS"
219 save_LDFLAGS="$LDFLAGS"
220 CFLAGS="$CFLAGS -fpic"
221 LDFLAGS="$LDFLAGS -shared"
222 AC_TRY_LINK([asm (".text; foo: nop; .data; .align 4; .byte 0; .uaword %r_disp32(foo); .text");],,
223 [libffi_cv_as_sparc_ua_pcrel=yes],
224 [libffi_cv_as_sparc_ua_pcrel=no])
225 CFLAGS="$save_CFLAGS"
226 LDFLAGS="$save_LDFLAGS"])
227 if test "x$libffi_cv_as_sparc_ua_pcrel" = xyes; then
228 AC_DEFINE(HAVE_AS_SPARC_UA_PCREL, 1,
229 [Define if your assembler and linker support unaligned PC relative relocs.])
232 AC_CACHE_CHECK([assembler .register pseudo-op support],
233 libffi_cv_as_register_pseudo_op, [
234 libffi_cv_as_register_pseudo_op=unknown
235 # Check if we have .register
236 AC_TRY_COMPILE([asm (".register %g2, #scratch");],,
237 [libffi_cv_as_register_pseudo_op=yes],
238 [libffi_cv_as_register_pseudo_op=no])
240 if test "x$libffi_cv_as_register_pseudo_op" = xyes; then
241 AC_DEFINE(HAVE_AS_REGISTER_PSEUDO_OP, 1,
242 [Define if your assembler supports .register.])
246 AC_CACHE_CHECK([whether .eh_frame section should be read-only],
247 libffi_cv_ro_eh_frame, [
248 libffi_cv_ro_eh_frame=no
249 echo 'extern void foo (void); void bar (void) { foo (); foo (); }' > conftest.c
250 if $CC $CFLAGS -S -fpic -fexceptions -o conftest.s conftest.c > /dev/null 2>&1; then
251 if grep '.section.*eh_frame.*"a"' conftest.s > /dev/null; then
252 libffi_cv_ro_eh_frame=yes
253 elif grep '.section.*eh_frame.*#alloc' conftest.c \
254 | grep -v '#write' > /dev/null; then
255 libffi_cv_ro_eh_frame=yes
260 if test "x$libffi_cv_ro_eh_frame" = xyes; then
261 AC_DEFINE(HAVE_RO_EH_FRAME, 1,
262 [Define if .eh_frame sections should be read-only.])
263 AC_DEFINE(EH_FRAME_FLAGS, "a",
264 [Define to the flags needed for the .section .eh_frame directive.])
266 AC_DEFINE(EH_FRAME_FLAGS, "aw",
267 [Define to the flags needed for the .section .eh_frame directive.])
270 AC_CACHE_CHECK([for __attribute__((visibility("hidden")))],
271 libffi_cv_hidden_visibility_attribute, [
272 echo 'int __attribute__ ((visibility ("hidden"))) foo (void) { return 1; }' > conftest.c
273 libffi_cv_hidden_visibility_attribute=no
274 if AC_TRY_COMMAND(${CC-cc} -Werror -S conftest.c -o conftest.s 1>&AS_MESSAGE_LOG_FD); then
275 if grep '\.hidden.*foo' conftest.s >/dev/null; then
276 libffi_cv_hidden_visibility_attribute=yes
281 if test $libffi_cv_hidden_visibility_attribute = yes; then
282 AC_DEFINE(HAVE_HIDDEN_VISIBILITY_ATTRIBUTE, 1,
283 [Define if __attribute__((visibility("hidden"))) is supported.])
287 #ifdef HAVE_HIDDEN_VISIBILITY_ATTRIBUTE
289 #define FFI_HIDDEN(name) .hidden name
291 #define FFI_HIDDEN __attribute__ ((visibility ("hidden")))
295 #define FFI_HIDDEN(name)
308 [ --enable-debug debugging mode],
309 if test "$enable_debug" = "yes"; then
310 AC_DEFINE(FFI_DEBUG, 1, [Define this if you want extra debugging.])
313 AC_ARG_ENABLE(structs,
314 [ --disable-structs omit code for struct support],
315 if test "$enable_structs" = "no"; then
316 AC_DEFINE(FFI_NO_STRUCTS, 1, [Define this is you do not want support for aggregate types.])
319 AC_ARG_ENABLE(raw-api,
320 [ --disable-raw-api make the raw api unavailable],
321 if test "$enable_raw_api" = "no"; then
322 AC_DEFINE(FFI_NO_RAW_API, 1, [Define this is you do not want support for the raw API.])
325 AC_ARG_ENABLE(purify-safety,
326 [ --enable-purify-safety purify-safe mode],
327 if test "$enable_purify_safety" = "yes"; then
328 AC_DEFINE(USING_PURIFY, 1, [Define this if you are using Purify and want to suppress spurious messages.])
331 if test -n "$with_cross_host" &&
332 test x"$with_cross_host" != x"no"; then
333 toolexecdir='$(exec_prefix)/$(target_alias)'
334 toolexeclibdir='$(toolexecdir)/lib'
336 toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
337 toolexeclibdir='$(libdir)'
339 multi_os_directory=`$CC -print-multi-os-directory`
340 case $multi_os_directory in
341 .) ;; # Avoid trailing /.
342 *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
344 AC_SUBST(toolexecdir)
345 AC_SUBST(toolexeclibdir)
347 if test "${multilib}" = "yes"; then
348 multilib_arg="--enable-multilib"
353 AC_CONFIG_COMMANDS(include, [test -d include || mkdir include])
354 AC_CONFIG_COMMANDS(src, [
355 test -d src || mkdir src
356 test -d src/$TARGETDIR || mkdir src/$TARGETDIR
357 ], [TARGETDIR="$TARGETDIR"])
359 AC_CONFIG_LINKS(include/ffitarget.h:src/$TARGETDIR/ffitarget.h)
361 AC_CONFIG_FILES(include/Makefile include/ffi.h Makefile testsuite/Makefile)