| blob | b46ac3131a8a588f78a9535b8fd0bec8fc2d6c5a |
1 ;; GCC machine description for SH synchronization instructions.
2 ;; Copyright (C) 2011-2017 Free Software Foundation, Inc.
3 ;;
4 ;; This file is part of GCC.
5 ;;
6 ;; GCC is free software; you can redistribute it and/or modify
7 ;; it under the terms of the GNU General Public License as published by
8 ;; the Free Software Foundation; either version 3, or (at your option)
9 ;; any later version.
10 ;;
11 ;; GCC is distributed in the hope that it will be useful,
12 ;; but WITHOUT ANY WARRANTY; without even the implied warranty of
13 ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 ;; GNU General Public License for more details.
15 ;;
16 ;; You should have received a copy of the GNU General Public License
17 ;; along with GCC; see the file COPYING3. If not see
18 ;; <http://www.gnu.org/licenses/>.
19 ;;
20 ;;
21 ;; Atomic integer operations for the Renesas / SuperH SH CPUs.
22 ;;
23 ;; On SH CPUs atomic integer operations can be done either in 'software' or
24 ;; in 'hardware' in various styles. True hardware support was introduced
25 ;; with the SH4A. Some SH2A dual-core models (e.g. SH7205) also come with
26 ;; 'semaphore' hardware registers, but these are currently unsupported.
27 ;; All SH CPUs support the 'tas.b' instruction, which can be optionally used
28 ;; to implement the 'atomic_test_and_set' builtin.
29 ;; The following atomic options and models are supported.
30 ;;
31 ;; tas.b atomic_test_and_set (-mtas)
32 ;;
33 ;; Depending on the particular hardware configuration, usage of the 'tas.b'
34 ;; instruction might be undesired or even unsafe. Thus, it has to be
35 ;; enabled by the user explicitly. If it is not enabled, the
36 ;; 'atomic_test_and_set' builtin is implemented either with hardware or with
37 ;; software atomics, depending on which is enabled. It is also possible to
38 ;; enable the 'tas.b' instruction only, without enabling support for the
39 ;; other atomic operations.
40 ;;
41 ;;
42 ;; Hardware Atomics (-matomic-model=hard-llcs; SH4A only)
43 ;;
44 ;; Hardware atomics implement all atomic operations using the 'movli.l' and
45 ;; 'movco.l' instructions that are availble on SH4A. On multi-core hardware
46 ;; configurations hardware atomics is the only safe mode.
47 ;; However, it can also be safely used on single-core configurations.
48 ;; Since these instructions operate on SImode memory only, QImode and HImode
49 ;; have to be emulated with SImode and subreg masking, which results in
50 ;; larger code.
51 ;;
52 ;;
53 ;; gUSA Software Atomics (-matomic-model=soft-gusa; SH3*, SH4* only)
54 ;;
55 ;; On single-core systems there can only be one execution context running
56 ;; at a given point in time. This allows the usage of rewindable atomic
57 ;; sequences, which effectively emulate locked-load / conditional-store
58 ;; operations. This requires complementary support in the interrupt /
59 ;; exception handling code (e.g. kernel) and does not work safely on multi-
60 ;; core configurations.
61 ;;
62 ;; When an execution context is interrupted while it is an atomic
63 ;; sequence, the interrupted context's PC is rewound to the beginning of
64 ;; the atomic sequence by the interrupt / exception handling code, before
65 ;; transferring control to another execution context. This is done by
66 ;; something like...
67 ;;
68 ;; if (interrupted_context_in_atomic_sequence
69 ;; && interrupted_pc < atomic_exitpoint)
70 ;; interrupted_pc = atomic_entrypoint;
71 ;;
72 ;; This method is also known as gUSA ("g" User Space Atomicity) and the
73 ;; Linux kernel for SH3/SH4 implements support for such software atomic
74 ;; sequences. It can also be implemented in freestanding environments.
75 ;;
76 ;; For this the following atomic sequence ABI is used.
77 ;;
78 ;; r15 >= 0: Execution context is not in an atomic sequence.
79 ;;
80 ;; r15 < 0: Execution context is in an atomic sequence and r15
81 ;; holds the negative byte length of the atomic sequence.
82 ;; In this case the following applies:
83 ;;
84 ;; r0: PC of the first instruction after the atomic
85 ;; write-back instruction (exit point).
86 ;; The entry point PC of the atomic sequence can be
87 ;; determined by doing r0 + r15.
88 ;;
89 ;; r1: Saved r15 stack pointer before entering the
90 ;; atomic sequence.
91 ;;
92 ;; An example atomic add sequence would look like:
93 ;;
94 ;; mova .Lend,r0 ! .Lend must be 4-byte aligned.
95 ;; mov r15,r1
96 ;; .align 2 ! Insert aligning nop if needed.
97 ;; mov #(.Lstart - .Lend),r15 ! Enter atomic sequence
98 ;;.Lstart:
99 ;; mov.l @r4,r2 ! read value
100 ;; add r2,r5 ! modify value
101 ;; mov.l r5,@r4 ! write-back
102 ;;.Lend:
103 ;; mov r1,r15 ! Exit atomic sequence
104 ;; ! r2 holds the previous value.
105 ;; ! r5 holds the new value.
106 ;;
107 ;; Notice that due to the restrictions of the mova instruction, the .Lend
108 ;; label must always be 4-byte aligned. Aligning the .Lend label would
109 ;; potentially insert a nop after the write-back instruction which could
110 ;; make the sequence to be rewound, although it has already passed the
111 ;; write-back instruction. This would make it execute twice.
112 ;; For correct operation the atomic sequences must not be rewound after
113 ;; they have passed the write-back instruction.
114 ;;
115 ;; This is model works only on SH3* and SH4* because the stack pointer (r15)
116 ;; is set to an invalid pointer temporarily. SH1* and SH2* CPUs will try
117 ;; to push SR and PC registers on the stack when an interrupt / exception
118 ;; occurs, and thus require the stack pointer (r15) always to be valid.
119 ;;
120 ;;
121 ;; TCB Software Atomics (-matomic-model=soft-tcb)
122 ;;
123 ;; This model is a variation of the gUSA model. The concept of rewindable
124 ;; atomic sequences is the same, but it does not use the stack pointer (r15)
125 ;; for signaling the 'is in atomic sequence' condition. Instead, a variable
126 ;; in the thread control block (TCB) is set to hold the exit point of the
127 ;; atomic sequence. This assumes that the GBR is used as a thread pointer
128 ;; register. The offset of the variable in the TCB to be used must be
129 ;; specified with an additional option 'gbr-offset', such as:
130 ;; -matomic-model=soft-tcb,gbr-offset=4
131 ;;
132 ;; For this model the following atomic sequence ABI is used.
133 ;;
134 ;; @(#x,gbr) == 0: Execution context is not in an atomic sequence.
135 ;;
136 ;; @(#x,gbr) != 0: Execution context is in an atomic sequence. In this
137 ;; case the following applies:
138 ;;
139 ;; @(#x,gbr): PC of the first instruction after the atomic
140 ;; write-back instruction (exit point).
141 ;;
142 ;; r1: Negative byte length of the atomic sequence.
143 ;; The entry point PC of the sequence can be
144 ;; determined by doing @(#x,gbr) + r1
145 ;;
146 ;; Note: #x is the user specified gbr-offset.
147 ;;
148 ;;
149 ;; Interrupt-Flipping Software Atomics (-matomic-model=soft-imask)
150 ;;
151 ;; This model achieves atomicity by temporarily disabling interrupts for
152 ;; the duration of the atomic sequence. This works only when the program
153 ;; runs in privileged mode but does not require any support from the
154 ;; interrupt / exception handling code. There is no particular ABI.
155 ;; To disable interrupts the SR.IMASK bits are set to '1111'.
156 ;; This method is not as efficient as the other software atomic models,
157 ;; since loading and storing SR (in order to flip interrupts on / off)
158 ;; requires using multi-cycle instructions. Moreover, it can potentially
159 ;; increase the interrupt latency which might be important for hard-realtime
160 ;; applications.
161 ;;
162 ;;
163 ;; Compatibility Notes
164 ;;
165 ;; On single-core SH4A CPUs software atomic aware interrupt / exception code
166 ;; is actually compatible with user code that utilizes hardware atomics.
167 ;; Since SImode hardware atomic sequences are more compact on SH4A they are
168 ;; always used, regardless of the selected atomic model. This atomic model
169 ;; mixing can be disabled by setting the 'strict' flag, like:
170 ;; -matomic-model=soft-gusa,strict
171 ;;
172 ;; The software atomic models are generally compatible with each other,
173 ;; but the interrupt / exception handling code has to support both gUSA and
174 ;; TCB models.
175 ;;
176 ;; The current atomic support is limited to QImode, HImode and SImode
177 ;; atomic operations. DImode operations could also be implemented but
178 ;; would require some ABI modifications to support multiple-instruction
179 ;; write-back. This is because SH1/SH2/SH3/SH4 does not have a DImode
180 ;; store instruction. DImode stores must be split into two SImode stores.
182 (define_c_enum "unspec" [
183 UNSPEC_ATOMIC
184 ])
186 (define_c_enum "unspecv" [
187 UNSPECV_CMPXCHG_1
188 UNSPECV_CMPXCHG_2
189 UNSPECV_CMPXCHG_3
190 ])
192 (define_mode_attr i124extend_insn [(QI "exts.b") (HI "exts.w") (SI "mov")])
194 (define_code_iterator FETCHOP [plus minus ior xor and])
195 (define_code_attr fetchop_name
196 [(plus "add") (minus "sub") (ior "or") (xor "xor") (and "and")])
198 ;;------------------------------------------------------------------------------
199 ;; comapre and swap
201 ;; Only the hard_llcs SImode patterns can use an I08 for the comparison
202 ;; or for the new swapped in value.
203 (define_predicate "atomic_arith_operand_0"
204 (and (match_code "subreg,reg,const_int")
205 (ior (match_operand 0 "arith_reg_operand")
206 (and (match_test "satisfies_constraint_I08 (op)")
207 (match_test "mode == SImode")
208 (ior (match_test "TARGET_ATOMIC_HARD_LLCS")
209 (match_test "TARGET_ATOMIC_ANY && TARGET_SH4A
210 && !TARGET_ATOMIC_STRICT"))))))
212 ;; Displacement addressing can be used for all SImode atomic patterns, except
213 ;; llcs.
214 (define_predicate "atomic_mem_operand_0"
215 (and (match_code "mem")
216 (ior (match_operand 0 "simple_mem_operand")
217 (and (match_test "mode == SImode")
218 (and (match_test "!TARGET_ATOMIC_HARD_LLCS")
219 (match_test "!TARGET_SH4A || TARGET_ATOMIC_STRICT"))
220 (match_operand 0 "short_displacement_mem_operand")))))
222 (define_expand "atomic_compare_and_swap<mode>"
223 [(match_operand:SI 0 "arith_reg_dest") ;; bool success output
224 (match_operand:QIHISI 1 "arith_reg_dest") ;; oldval output
225 (match_operand:QIHISI 2 "atomic_mem_operand_0") ;; memory
226 (match_operand:QIHISI 3 "atomic_arith_operand_0") ;; expected input
227 (match_operand:QIHISI 4 "atomic_arith_operand_0") ;; newval input
228 (match_operand:SI 5 "const_int_operand") ;; is_weak
229 (match_operand:SI 6 "const_int_operand") ;; success model
230 (match_operand:SI 7 "const_int_operand")] ;; failure model
231 "TARGET_ATOMIC_ANY"
232 {
233 rtx mem = operands[2];
234 rtx old_val = gen_lowpart (SImode, operands[1]);
235 rtx exp_val = operands[3];
236 rtx new_val = operands[4];
237 rtx atomic_insn;
239 if (TARGET_ATOMIC_HARD_LLCS
240 || (TARGET_SH4A && <MODE>mode == SImode && !TARGET_ATOMIC_STRICT))
241 atomic_insn = gen_atomic_compare_and_swap<mode>_hard (old_val, mem,
242 exp_val, new_val);
243 else if (TARGET_ATOMIC_SOFT_GUSA)
244 atomic_insn = gen_atomic_compare_and_swap<mode>_soft_gusa (old_val, mem,
245 exp_val, new_val);
246 else if (TARGET_ATOMIC_SOFT_TCB)
247 atomic_insn = gen_atomic_compare_and_swap<mode>_soft_tcb (old_val, mem,
248 exp_val, new_val, TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX);
249 else if (TARGET_ATOMIC_SOFT_IMASK)
250 atomic_insn = gen_atomic_compare_and_swap<mode>_soft_imask (old_val, mem,
251 exp_val, new_val);
252 else
253 FAIL;
255 emit_insn (atomic_insn);
257 if (<MODE>mode == QImode)
258 emit_insn (gen_zero_extendqisi2 (gen_lowpart (SImode, operands[1]),
259 operands[1]));
260 else if (<MODE>mode == HImode)
261 emit_insn (gen_zero_extendhisi2 (gen_lowpart (SImode, operands[1]),
262 operands[1]));
263 emit_insn (gen_movsi (operands[0], gen_rtx_REG (SImode, T_REG)));
264 DONE;
265 })
267 (define_insn_and_split "atomic_compare_and_swapsi_hard"
268 [(set (match_operand:SI 0 "arith_reg_dest" "=&r")
269 (unspec_volatile:SI
270 [(match_operand:SI 1 "atomic_mem_operand_0" "=Sra")
271 (match_operand:SI 2 "arith_operand" "rI08")
272 (match_operand:SI 3 "arith_operand" "rI08")]
273 UNSPECV_CMPXCHG_1))
274 (set (match_dup 1)
275 (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_2))
276 (set (reg:SI T_REG)
277 (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_3))
278 (clobber (reg:SI R0_REG))]
279 "TARGET_ATOMIC_HARD_LLCS
280 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
281 {
282 return "\r0: movli.l %1,r0" "\n"
283 " cmp/eq %2,r0" "\n"
284 " bf{.|/}s 0f" "\n"
285 " mov r0,%0" "\n"
286 " mov %3,r0" "\n"
287 " movco.l r0,%1" "\n"
288 " bf 0b" "\n"
289 "0:";
290 }
291 "&& can_create_pseudo_p () && !satisfies_constraint_I08 (operands[2])"
292 [(const_int 0)]
293 {
294 /* FIXME: Sometimes the 'expected value' operand is not propagated as
295 immediate value. See PR 64974. */
296 set_of_reg op2 = sh_find_set_of_reg (operands[2], curr_insn,
297 prev_nonnote_insn_bb);
298 if (op2.set_src != NULL && satisfies_constraint_I08 (op2.set_src))
299 {
300 rtx* r = &XVECEXP (XEXP (XVECEXP (PATTERN (curr_insn), 0, 0), 1), 0, 1);
301 validate_change (curr_insn, r, op2.set_src, false);
302 DONE;
303 }
304 else
305 FAIL;
306 }
307 [(set_attr "length" "14")])
309 ;; The QIHImode llcs patterns modify the address register of the memory
310 ;; operand. In order to express that, we have to open code the memory
311 ;; operand. Initially the insn is expanded like every other atomic insn
312 ;; using the memory operand. In split1 the insn is converted and the
313 ;; memory operand's address register is exposed.
314 (define_insn_and_split "atomic_compare_and_swap<mode>_hard"
315 [(set (match_operand:SI 0 "arith_reg_dest")
316 (unspec_volatile:SI
317 [(match_operand:QIHI 1 "atomic_mem_operand_0")
318 (match_operand:QIHI 2 "arith_reg_operand")
319 (match_operand:QIHI 3 "arith_reg_operand")]
320 UNSPECV_CMPXCHG_1))
321 (set (match_dup 1)
322 (unspec_volatile:QIHI [(const_int 0)] UNSPECV_CMPXCHG_2))
323 (set (reg:SI T_REG)
324 (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_3))
325 (clobber (reg:SI R0_REG))]
326 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
327 "#"
328 "&& 1"
329 [(const_int 0)]
330 {
331 rtx i = gen_atomic_compare_and_swap<mode>_hard_1 (
332 operands[0], XEXP (operands[1], 0), operands[2], operands[3]);
334 /* Replace the new mems in the new insn with the old mem to preserve
335 aliasing info. */
336 XVECEXP (XEXP (XVECEXP (i, 0, 0), 1), 0, 0) = operands[1];
337 XEXP (XVECEXP (i, 0, 1), 0) = operands[1];
338 emit_insn (i);
339 })
341 (define_insn "atomic_compare_and_swap<mode>_hard_1"
342 [(set (match_operand:SI 0 "arith_reg_dest" "=&r")
343 (unspec_volatile:SI
344 [(mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r"))
345 (match_operand:QIHI 2 "arith_reg_operand" "r")
346 (match_operand:QIHI 3 "arith_reg_operand" "r")]
347 UNSPECV_CMPXCHG_1))
348 (set (mem:QIHI (match_dup 1))
349 (unspec_volatile:QIHI [(const_int 0)] UNSPECV_CMPXCHG_2))
350 (set (reg:SI T_REG)
351 (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_3))
352 (clobber (reg:SI R0_REG))
353 (clobber (match_scratch:SI 4 "=&r"))
354 (clobber (match_scratch:SI 5 "=&r"))
355 (clobber (match_scratch:SI 6 "=1"))]
356 "TARGET_ATOMIC_HARD_LLCS"
357 {
358 return "\r mov #-4,%5" "\n"
359 " <i124extend_insn> %2,%4" "\n"
360 " and %1,%5" "\n"
361 " xor %5,%1" "\n"
362 " add r15,%1" "\n"
363 " add #-4,%1" "\n"
364 "0: movli.l @%5,r0" "\n"
365 " mov.l r0,@-r15" "\n"
366 " mov.<bw> @%1,%0" "\n"
367 " mov.<bw> %3,@%1" "\n"
368 " cmp/eq %4,%0" "\n"
369 " bf{.|/}s 0f" "\n"
370 " mov.l @r15+,r0" "\n"
371 " movco.l r0,@%5" "\n"
372 " bf 0b" "\n"
373 "0:";
374 }
375 [(set_attr "length" "30")])
377 (define_insn "atomic_compare_and_swap<mode>_soft_gusa"
378 [(set (match_operand:SI 0 "arith_reg_dest" "=&u")
379 (unspec_volatile:SI
380 [(match_operand:QIHISI 1 "atomic_mem_operand_0" "=AraAdd")
381 (match_operand:QIHISI 2 "arith_reg_operand" "u")
382 (match_operand:QIHISI 3 "arith_reg_operand" "u")]
383 UNSPECV_CMPXCHG_1))
384 (set (match_dup 1)
385 (unspec_volatile:QIHISI [(const_int 0)] UNSPECV_CMPXCHG_2))
386 (set (reg:SI T_REG)
387 (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_3))
388 (clobber (match_scratch:SI 4 "=&u"))
389 (clobber (reg:SI R0_REG))
390 (clobber (reg:SI R1_REG))]
391 "TARGET_ATOMIC_SOFT_GUSA"
392 {
393 return "\r mova 1f,r0" "\n"
394 " <i124extend_insn> %2,%4" "\n"
395 " .align 2" "\n"
396 " mov r15,r1" "\n"
397 " mov #(0f-1f),r15" "\n"
398 "0: mov.<bwl> %1,%0" "\n"
399 " cmp/eq %0,%4" "\n"
400 " bf 1f" "\n"
401 " mov.<bwl> %3,%1" "\n"
402 "1: mov r1,r15";
403 }
404 [(set_attr "length" "20")])
406 (define_insn "atomic_compare_and_swap<mode>_soft_tcb"
407 [(set (match_operand:SI 0 "arith_reg_dest" "=&r")
408 (unspec_volatile:SI
409 [(match_operand:QIHISI 1 "atomic_mem_operand_0" "=SraSdd")
410 (match_operand:QIHISI 2 "arith_reg_operand" "r")
411 (match_operand:QIHISI 3 "arith_reg_operand" "r")]
412 UNSPECV_CMPXCHG_1))
413 (set (match_dup 1)
414 (unspec_volatile:QIHISI [(const_int 0)] UNSPECV_CMPXCHG_2))
415 (set (reg:SI T_REG)
416 (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_3))
417 (use (match_operand:SI 4 "gbr_displacement"))
418 (clobber (match_scratch:SI 5 "=&r"))
419 (clobber (reg:SI R0_REG))
420 (clobber (reg:SI R1_REG))]
421 "TARGET_ATOMIC_SOFT_TCB"
422 {
423 return "\r mova 1f,r0" "\n"
424 " .align 2" "\n"
425 " <i124extend_insn> %2,%5" "\n"
426 " mov #(0f-1f),r1" "\n"
427 " mov.l r0,@(%O4,gbr)" "\n"
428 "0: mov.<bwl> %1,%0" "\n"
429 " mov #0,r0" "\n"
430 " cmp/eq %0,%5" "\n"
431 " bf 1f" "\n"
432 " mov.<bwl> %3,%1" "\n"
433 "1: mov.l r0,@(%O4,gbr)";
434 }
435 [(set_attr "length" "22")])
437 (define_insn "atomic_compare_and_swap<mode>_soft_imask"
438 [(set (match_operand:SI 0 "arith_reg_dest" "=&z")
439 (unspec_volatile:SI
440 [(match_operand:QIHISI 1 "atomic_mem_operand_0" "=SraSdd")
441 (match_operand:QIHISI 2 "arith_reg_operand" "r")
442 (match_operand:QIHISI 3 "arith_reg_operand" "r")]
443 UNSPECV_CMPXCHG_1))
444 (set (match_dup 1)
445 (unspec_volatile:QIHISI [(const_int 0)] UNSPECV_CMPXCHG_2))
446 (set (reg:SI T_REG)
447 (unspec_volatile:SI [(const_int 0)] UNSPECV_CMPXCHG_3))
448 (clobber (match_scratch:SI 4 "=&r"))
449 (clobber (match_scratch:SI 5 "=&r"))]
450 "TARGET_ATOMIC_SOFT_IMASK"
451 {
452 /* The comparison result is supposed to be in T_REG.
453 Notice that restoring SR will overwrite the T_REG. We handle this by
454 rotating the T_REG into the saved SR before restoring SR. On SH2A we
455 can do one insn shorter by using the bst insn. */
456 if (!TARGET_SH2A)
457 return "\r stc sr,%0" "\n"
458 " <i124extend_insn> %2,%4" "\n"
459 " mov %0,%5" "\n"
460 " or #0xF0,%0" "\n"
461 " shlr %5" "\n"
462 " ldc %0,sr" "\n"
463 " mov.<bwl> %1,%0" "\n"
464 " cmp/eq %4,%0" "\n"
465 " bf 1f" "\n"
466 " mov.<bwl> %3,%1" "\n"
467 "1: rotcl %5" "\n"
468 " ldc %5,sr";
469 else
470 return "\r stc sr,%0" "\n"
471 " <i124extend_insn> %2,%4" "\n"
472 " mov %0,%5" "\n"
473 " or #0xF0,%0" "\n"
474 " ldc %0,sr" "\n"
475 " mov.<bwl> %1,%0" "\n"
476 " cmp/eq %4,%0" "\n"
477 " bst #0,%5" "\n"
478 " bf 1f" "\n"
479 " mov.<bwl> %3,%1" "\n"
480 "1: ldc %5,sr";
481 }
482 [(set (attr "length") (if_then_else (match_test "!TARGET_SH2A")
483 (const_string "24")
484 (const_string "22")))])
486 ;;------------------------------------------------------------------------------
487 ;; read - write - return old value
489 (define_expand "atomic_exchange<mode>"
490 [(match_operand:QIHISI 0 "arith_reg_dest") ;; oldval output
491 (match_operand:QIHISI 1 "atomic_mem_operand_0") ;; memory
492 (match_operand:QIHISI 2 "atomic_arith_operand_0") ;; newval input
493 (match_operand:SI 3 "const_int_operand")] ;; memory model
494 "TARGET_ATOMIC_ANY"
495 {
496 rtx mem = operands[1];
497 rtx val = operands[2];
498 rtx atomic_insn;
500 if (TARGET_ATOMIC_HARD_LLCS
501 || (TARGET_SH4A && <MODE>mode == SImode && !TARGET_ATOMIC_STRICT))
502 atomic_insn = gen_atomic_exchange<mode>_hard (operands[0], mem, val);
503 else if (TARGET_ATOMIC_SOFT_GUSA)
504 atomic_insn = gen_atomic_exchange<mode>_soft_gusa (operands[0], mem, val);
505 else if (TARGET_ATOMIC_SOFT_TCB)
506 atomic_insn = gen_atomic_exchange<mode>_soft_tcb (operands[0], mem, val,
507 TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX);
508 else if (TARGET_ATOMIC_SOFT_IMASK)
509 atomic_insn = gen_atomic_exchange<mode>_soft_imask (operands[0], mem, val);
510 else
511 FAIL;
513 emit_insn (atomic_insn);
515 if (<MODE>mode == QImode)
516 emit_insn (gen_zero_extendqisi2 (gen_lowpart (SImode, operands[0]),
517 operands[0]));
518 else if (<MODE>mode == HImode)
519 emit_insn (gen_zero_extendhisi2 (gen_lowpart (SImode, operands[0]),
520 operands[0]));
521 DONE;
522 })
524 (define_insn "atomic_exchangesi_hard"
525 [(set (match_operand:SI 0 "arith_reg_dest" "=&r")
526 (match_operand:SI 1 "atomic_mem_operand_0" "=Sra"))
527 (set (match_dup 1)
528 (unspec:SI
529 [(match_operand:SI 2 "arith_operand" "rI08")] UNSPEC_ATOMIC))
530 (set (reg:SI T_REG) (const_int 1))
531 (clobber (reg:SI R0_REG))]
532 "TARGET_ATOMIC_HARD_LLCS
533 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
534 {
535 return "\r0: movli.l %1,r0" "\n"
536 " mov r0,%0" "\n"
537 " mov %2,r0" "\n"
538 " movco.l r0,%1" "\n"
539 " bf 0b";
540 }
541 [(set_attr "length" "10")])
543 ;; The QIHImode llcs patterns modify the address register of the memory
544 ;; operand. In order to express that, we have to open code the memory
545 ;; operand. Initially the insn is expanded like every other atomic insn
546 ;; using the memory operand. In split1 the insn is converted and the
547 ;; memory operand's address register is exposed.
548 (define_insn_and_split "atomic_exchange<mode>_hard"
549 [(set (match_operand:QIHI 0 "arith_reg_dest")
550 (match_operand:QIHI 1 "atomic_mem_operand_0"))
551 (set (match_dup 1)
552 (unspec:QIHI
553 [(match_operand:QIHI 2 "arith_reg_operand")] UNSPEC_ATOMIC))
554 (set (reg:SI T_REG) (const_int 1))
555 (clobber (reg:SI R0_REG))]
556 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
557 "#"
558 "&& 1"
559 [(const_int 0)]
560 {
561 rtx i = gen_atomic_exchange<mode>_hard_1 (operands[0], XEXP (operands[1], 0),
562 operands[2]);
564 /* Replace the new mems in the new insn with the old mem to preserve
565 aliasing info. */
566 XEXP (XVECEXP (i, 0, 0), 1) = operands[1];
567 XEXP (XVECEXP (i, 0, 1), 0) = operands[1];
568 emit_insn (i);
569 })
571 (define_insn "atomic_exchange<mode>_hard_1"
572 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
573 (mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r")))
574 (set (mem:QIHI (match_dup 1))
575 (unspec:QIHI
576 [(match_operand:QIHI 2 "arith_reg_operand" "r")] UNSPEC_ATOMIC))
577 (set (reg:SI T_REG) (const_int 1))
578 (clobber (reg:SI R0_REG))
579 (clobber (match_scratch:SI 3 "=&r"))
580 (clobber (match_scratch:SI 4 "=1"))]
581 "TARGET_ATOMIC_HARD_LLCS"
582 {
583 return "\r mov #-4,%3" "\n"
584 " and %1,%3" "\n"
585 " xor %3,%1" "\n"
586 " add r15,%1" "\n"
587 " add #-4,%1" "\n"
588 "0: movli.l @%3,r0" "\n"
589 " mov.l r0,@-r15" "\n"
590 " mov.<bw> @%1,%0" "\n"
591 " mov.<bw> %2,@%1" "\n"
592 " mov.l @r15+,r0" "\n"
593 " movco.l r0,@%3" "\n"
594 " bf 0b";
595 }
596 [(set_attr "length" "24")])
598 (define_insn "atomic_exchange<mode>_soft_gusa"
599 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&u")
600 (match_operand:QIHISI 1 "atomic_mem_operand_0" "=AraAdd"))
601 (set (match_dup 1)
602 (unspec:QIHISI
603 [(match_operand:QIHISI 2 "arith_reg_operand" "u")] UNSPEC_ATOMIC))
604 (clobber (reg:SI R0_REG))
605 (clobber (reg:SI R1_REG))]
606 "TARGET_ATOMIC_SOFT_GUSA"
607 {
608 return "\r mova 1f,r0" "\n"
609 " .align 2" "\n"
610 " mov r15,r1" "\n"
611 " mov #(0f-1f),r15" "\n"
612 "0: mov.<bwl> %1,%0" "\n"
613 " mov.<bwl> %2,%1" "\n"
614 "1: mov r1,r15";
615 }
616 [(set_attr "length" "14")])
618 (define_insn "atomic_exchange<mode>_soft_tcb"
619 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
620 (match_operand:QIHISI 1 "atomic_mem_operand_0" "=SraSdd"))
621 (set (match_dup 1)
622 (unspec:QIHISI
623 [(match_operand:QIHISI 2 "arith_reg_operand" "r")] UNSPEC_ATOMIC))
624 (clobber (reg:SI R0_REG))
625 (clobber (reg:SI R1_REG))
626 (use (match_operand:SI 3 "gbr_displacement"))]
627 "TARGET_ATOMIC_SOFT_TCB"
628 {
629 return "\r mova 1f,r0" "\n"
630 " mov #(0f-1f),r1" "\n"
631 " .align 2" "\n"
632 " mov.l r0,@(%O3,gbr)" "\n"
633 "0: mov.<bwl> %1,%0" "\n"
634 " mov #0,r0" "\n"
635 " mov.<bwl> %2,%1" "\n"
636 "1: mov.l r0,@(%O3,gbr)";
637 }
638 [(set_attr "length" "16")])
640 (define_insn "atomic_exchange<mode>_soft_imask"
641 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&z")
642 (match_operand:QIHISI 1 "atomic_mem_operand_0" "=SraSdd"))
643 (set (match_dup 1)
644 (unspec:QIHISI
645 [(match_operand:QIHISI 2 "arith_reg_operand" "r")] UNSPEC_ATOMIC))
646 (clobber (match_scratch:SI 3 "=&r"))]
647 "TARGET_ATOMIC_SOFT_IMASK"
648 {
649 return "\r stc sr,%0" "\n"
650 " mov %0,%3" "\n"
651 " or #0xF0,%0" "\n"
652 " ldc %0,sr" "\n"
653 " mov.<bwl> %1,%0" "\n"
654 " mov.<bwl> %2,%1" "\n"
655 " ldc %3,sr";
656 }
657 [(set_attr "length" "14")])
659 ;;------------------------------------------------------------------------------
660 ;; read - add|sub|or|and|xor|nand - write - return old value
662 ;; atomic_arith_operand_1 can be used by any atomic type for a plus op,
663 ;; since there's no r0 restriction.
664 (define_predicate "atomic_arith_operand_1"
665 (and (match_code "subreg,reg,const_int")
666 (ior (match_operand 0 "arith_reg_operand")
667 (match_test "satisfies_constraint_I08 (op)"))))
669 ;; atomic_logic_operand_1 can be used by the hard_llcs, tcb and soft_imask
670 ;; patterns only due to its r0 restriction.
671 (define_predicate "atomic_logical_operand_1"
672 (and (match_code "subreg,reg,const_int")
673 (ior (match_operand 0 "arith_reg_operand")
674 (and (match_test "satisfies_constraint_K08 (op)")
675 (ior (match_test "TARGET_ATOMIC_HARD_LLCS")
676 (match_test "TARGET_ATOMIC_SOFT_IMASK")
677 (match_test "TARGET_ATOMIC_SOFT_TCB")
678 (match_test "TARGET_ATOMIC_ANY && TARGET_SH4A
679 && mode == SImode
680 && !TARGET_ATOMIC_STRICT"))))))
682 (define_code_attr fetchop_predicate_1
683 [(plus "atomic_arith_operand_1") (minus "arith_reg_operand")
684 (ior "atomic_logical_operand_1") (xor "atomic_logical_operand_1")
685 (and "atomic_logical_operand_1")])
687 (define_code_attr fetchop_constraint_1_llcs
688 [(plus "rI08") (minus "r") (ior "rK08") (xor "rK08") (and "rK08")])
690 (define_code_attr fetchop_constraint_1_gusa
691 [(plus "uI08") (minus "u") (ior "u") (xor "u") (and "u")])
693 (define_code_attr fetchop_constraint_1_tcb
694 [(plus "rI08") (minus "r") (ior "rK08") (xor "rK08") (and "rK08")])
696 (define_code_attr fetchop_constraint_1_imask
697 [(plus "rI08") (minus "r") (ior "rK08") (xor "rK08") (and "rK08")])
699 ;; Displacement addressing mode (incl. GBR relative) can be used by tcb and
700 ;; imask atomic patterns in any mode, since all the patterns use R0 as the
701 ;; register operand for memory loads/stores. gusa and llcs patterns can only
702 ;; use displacement addressing for SImode.
703 (define_predicate "atomic_mem_operand_1"
704 (and (match_code "mem")
705 (ior (match_operand 0 "simple_mem_operand")
706 (and (match_test "mode == SImode")
707 (match_test "TARGET_ATOMIC_SOFT_GUSA
708 && (!TARGET_SH4A || TARGET_ATOMIC_STRICT)")
709 (match_operand 0 "short_displacement_mem_operand"))
710 (and (ior (match_test "(TARGET_ATOMIC_SOFT_TCB
711 || TARGET_ATOMIC_SOFT_IMASK)
712 && (!TARGET_SH4A || TARGET_ATOMIC_STRICT)")
713 (match_test "(TARGET_ATOMIC_SOFT_TCB
714 || TARGET_ATOMIC_SOFT_IMASK)
715 && TARGET_SH4A && !TARGET_ATOMIC_STRICT
716 && mode != SImode"))
717 (ior (match_operand 0 "short_displacement_mem_operand")
718 (match_operand 0 "gbr_address_mem"))))))
720 (define_expand "atomic_fetch_<fetchop_name><mode>"
721 [(set (match_operand:QIHISI 0 "arith_reg_dest")
722 (match_operand:QIHISI 1 "atomic_mem_operand_1"))
723 (set (match_dup 1)
724 (unspec:QIHISI
725 [(FETCHOP:QIHISI (match_dup 1)
726 (match_operand:QIHISI 2 "<fetchop_predicate_1>"))]
727 UNSPEC_ATOMIC))
728 (match_operand:SI 3 "const_int_operand")]
729 "TARGET_ATOMIC_ANY"
730 {
731 rtx mem = operands[1];
732 rtx atomic_insn;
734 if (TARGET_ATOMIC_HARD_LLCS
735 || (TARGET_SH4A && <MODE>mode == SImode && !TARGET_ATOMIC_STRICT))
736 atomic_insn = gen_atomic_fetch_<fetchop_name><mode>_hard (operands[0], mem,
737 operands[2]);
738 else if (TARGET_ATOMIC_SOFT_GUSA)
739 atomic_insn = gen_atomic_fetch_<fetchop_name><mode>_soft_gusa (operands[0],
740 mem, operands[2]);
741 else if (TARGET_ATOMIC_SOFT_TCB)
742 atomic_insn = gen_atomic_fetch_<fetchop_name><mode>_soft_tcb (operands[0],
743 mem, operands[2], TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX);
744 else if (TARGET_ATOMIC_SOFT_IMASK)
745 atomic_insn = gen_atomic_fetch_<fetchop_name><mode>_soft_imask (operands[0],
746 mem, operands[2]);
747 else
748 FAIL;
750 emit_insn (atomic_insn);
752 if (<MODE>mode == QImode)
753 emit_insn (gen_zero_extendqisi2 (gen_lowpart (SImode, operands[0]),
754 operands[0]));
755 else if (<MODE>mode == HImode)
756 emit_insn (gen_zero_extendhisi2 (gen_lowpart (SImode, operands[0]),
757 operands[0]));
758 DONE;
759 })
761 (define_insn_and_split "atomic_fetch_<fetchop_name>si_hard"
762 [(set (match_operand:SI 0 "arith_reg_dest" "=&r")
763 (match_operand:SI 1 "atomic_mem_operand_1" "=Sra"))
764 (set (match_dup 1)
765 (unspec:SI
766 [(FETCHOP:SI (match_dup 1)
767 (match_operand:SI 2 "<fetchop_predicate_1>"
768 "<fetchop_constraint_1_llcs>"))]
769 UNSPEC_ATOMIC))
770 (set (reg:SI T_REG) (const_int 1))
771 (clobber (reg:SI R0_REG))]
772 "TARGET_ATOMIC_HARD_LLCS
773 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
774 {
775 return "\r0: movli.l %1,r0" "\n"
776 " mov r0,%0" "\n"
777 " <fetchop_name> %2,r0" "\n"
778 " movco.l r0,%1" "\n"
779 " bf 0b";
780 }
781 "&& can_create_pseudo_p () && optimize
782 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
783 [(const_int 0)]
784 {
785 emit_insn (gen_atomic_<fetchop_name>_fetchsi_hard (gen_reg_rtx (SImode),
786 operands[1], operands[2]));
787 }
788 [(set_attr "length" "10")])
790 ;; Combine pattern for xor (val, -1) / nand (val, -1).
791 (define_insn_and_split "atomic_fetch_notsi_hard"
792 [(set (match_operand:SI 0 "arith_reg_dest" "=&r")
793 (match_operand:SI 1 "atomic_mem_operand_1" "=Sra"))
794 (set (match_dup 1)
795 (unspec:SI [(not:SI (match_dup 1))] UNSPEC_ATOMIC))
796 (set (reg:SI T_REG) (const_int 1))
797 (clobber (reg:SI R0_REG))]
798 "TARGET_ATOMIC_HARD_LLCS
799 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
800 {
801 return "\r0: movli.l %1,r0" "\n"
802 " mov r0,%0" "\n"
803 " not r0,r0" "\n"
804 " movco.l r0,%1" "\n"
805 " bf 0b";
806 }
807 "&& can_create_pseudo_p () && optimize
808 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
809 [(const_int 0)]
810 {
811 emit_insn (gen_atomic_not_fetchsi_hard (gen_reg_rtx (SImode), operands[1]));
812 }
813 [(set_attr "length" "10")])
815 ;; The QIHImode llcs patterns modify the address register of the memory
816 ;; operand. In order to express that, we have to open code the memory
817 ;; operand. Initially the insn is expanded like every other atomic insn
818 ;; using the memory operand. In split1 the insn is converted and the
819 ;; memory operand's address register is exposed.
820 (define_insn_and_split "atomic_fetch_<fetchop_name><mode>_hard"
821 [(set (match_operand:QIHI 0 "arith_reg_dest")
822 (match_operand:QIHI 1 "atomic_mem_operand_1"))
823 (set (match_dup 1)
824 (unspec:QIHI
825 [(FETCHOP:QIHI (match_dup 1)
826 (match_operand:QIHI 2 "<fetchop_predicate_1>"))]
827 UNSPEC_ATOMIC))
828 (set (reg:SI T_REG) (const_int 1))
829 (clobber (reg:SI R0_REG))]
830 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
831 "#"
832 "&& 1"
833 [(const_int 0)]
834 {
835 if (optimize
836 && sh_reg_dead_or_unused_after_insn (curr_insn, REGNO (operands[0])))
837 emit_insn (gen_atomic_<fetchop_name><mode>_hard (operands[1], operands[2]));
838 else
839 {
840 rtx i = gen_atomic_fetch_<fetchop_name><mode>_hard_1 (
841 operands[0], XEXP (operands[1], 0), operands[2]);
843 /* Replace the new mems in the new insn with the old mem to preserve
844 aliasing info. */
845 XEXP (XVECEXP (i, 0, 0), 1) = operands[1];
846 XEXP (XVECEXP (i, 0, 1), 0) = operands[1];
847 XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 1), 1), 0, 0), 0) = operands[1];
848 emit_insn (i);
849 }
850 })
852 (define_insn "atomic_fetch_<fetchop_name><mode>_hard_1"
853 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
854 (mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r")))
855 (set (mem:QIHI (match_dup 1))
856 (unspec:QIHI
857 [(FETCHOP:QIHI (mem:QIHI (match_dup 1))
858 (match_operand:QIHI 2 "<fetchop_predicate_1>"
859 "<fetchop_constraint_1_llcs>"))]
860 UNSPEC_ATOMIC))
861 (set (reg:SI T_REG) (const_int 1))
862 (clobber (reg:SI R0_REG))
863 (clobber (match_scratch:SI 3 "=&r"))
864 (clobber (match_scratch:SI 4 "=1"))]
865 "TARGET_ATOMIC_HARD_LLCS"
866 {
867 return "\r mov #-4,%3" "\n"
868 " and %1,%3" "\n"
869 " xor %3,%1" "\n"
870 " add r15,%1" "\n"
871 " add #-4,%1" "\n"
872 "0: movli.l @%3,r0" "\n"
873 " mov.l r0,@-r15" "\n"
874 " mov.<bw> @%1,r0" "\n"
875 " mov r0,%0" "\n"
876 " <fetchop_name> %2,r0" "\n"
877 " mov.<bw> r0,@%1" "\n"
878 " mov.l @r15+,r0" "\n"
879 " movco.l r0,@%3" "\n"
880 " bf 0b";
881 }
882 [(set_attr "length" "28")])
884 ;; The QIHImode llcs patterns modify the address register of the memory
885 ;; operand. In order to express that, we have to open code the memory
886 ;; operand. Initially the insn is expanded like every other atomic insn
887 ;; using the memory operand. In split1 the insn is converted and the
888 ;; memory operand's address register is exposed.
889 (define_insn_and_split "atomic_<fetchop_name><mode>_hard"
890 [(set (match_operand:QIHI 0 "atomic_mem_operand_1")
891 (unspec:QIHI
892 [(FETCHOP:QIHI (match_dup 0)
893 (match_operand:QIHI 1 "<fetchop_predicate_1>"))]
894 UNSPEC_ATOMIC))
895 (set (reg:SI T_REG) (const_int 1))
896 (clobber (reg:SI R0_REG))]
897 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
898 "#"
899 "&& 1"
900 [(const_int 0)]
901 {
902 rtx i = gen_atomic_<fetchop_name><mode>_hard_1 (XEXP (operands[0], 0),
903 operands[1]);
904 /* Replace the new mems in the new insn with the old mem to preserve
905 aliasing info. */
906 XEXP (XVECEXP (i, 0, 0), 0) = operands[0];
907 XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 0), 1), 0, 0), 0) = operands[0];
908 emit_insn (i);
909 })
911 (define_insn "atomic_<fetchop_name><mode>_hard_1"
912 [(set (mem:QIHI (match_operand:SI 0 "arith_reg_operand" "r"))
913 (unspec:QIHI
914 [(FETCHOP:QIHI (mem:QIHI (match_dup 0))
915 (match_operand:QIHI 1 "<fetchop_predicate_1>"
916 "<fetchop_constraint_1_llcs>"))]
917 UNSPEC_ATOMIC))
918 (set (reg:SI T_REG) (const_int 1))
919 (clobber (reg:SI R0_REG))
920 (clobber (match_scratch:SI 2 "=&r"))
921 (clobber (match_scratch:SI 3 "=0"))]
922 "TARGET_ATOMIC_HARD_LLCS"
923 {
924 return "\r mov #-4,%2" "\n"
925 " and %0,%2" "\n"
926 " xor %2,%0" "\n"
927 " add r15,%0" "\n"
928 " add #-4,%0" "\n"
929 "0: movli.l @%2,r0" "\n"
930 " mov.l r0,@-r15" "\n"
931 " mov.<bw> @%0,r0" "\n"
932 " <fetchop_name> %1,r0" "\n"
933 " mov.<bw> r0,@%0" "\n"
934 " mov.l @r15+,r0" "\n"
935 " movco.l r0,@%2" "\n"
936 " bf 0b";
937 }
938 [(set_attr "length" "26")])
940 ;; Combine pattern for xor (val, -1) / nand (val, -1).
941 (define_insn_and_split "atomic_fetch_not<mode>_hard"
942 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
943 (mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r")))
944 (set (mem:QIHI (match_dup 1))
945 (unspec:QIHI [(not:QIHI (mem:QIHI (match_dup 1)))] UNSPEC_ATOMIC))
946 (set (reg:SI T_REG) (const_int 1))
947 (clobber (reg:SI R0_REG))
948 (clobber (match_scratch:SI 2 "=&r"))
949 (clobber (match_scratch:SI 3 "=1"))]
950 "TARGET_ATOMIC_HARD_LLCS"
951 {
952 return "\r mov #-4,%2" "\n"
953 " and %1,%2" "\n"
954 " xor %2,%1" "\n"
955 " add r15,%1" "\n"
956 " add #-4,%1" "\n"
957 "0: movli.l @%2,r0" "\n"
958 " mov.l r0,@-r15" "\n"
959 " mov.<bw> @%1,%0" "\n"
960 " not %0,r0" "\n"
961 " mov.<bw> r0,@%1" "\n"
962 " mov.l @r15+,r0" "\n"
963 " movco.l r0,@%2" "\n"
964 " bf 0b";
965 }
966 "&& can_create_pseudo_p () && optimize
967 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
968 [(const_int 0)]
969 {
970 rtx i = gen_atomic_not<mode>_hard (operands[1]);
972 /* Replace the new mems in the new insn with the old mem to preserve
973 aliasing info. */
974 rtx m = XEXP (XVECEXP (PATTERN (curr_insn), 0, 0), 1);
975 XEXP (XVECEXP (i, 0, 0), 0) = m;
976 XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 0), 1), 0, 0), 0) = m;
977 emit_insn (i);
978 }
979 [(set_attr "length" "26")])
981 (define_insn "atomic_not<mode>_hard"
982 [(set (mem:QIHI (match_operand:SI 0 "arith_reg_operand" "r"))
983 (unspec:QIHI [(not:QIHI (mem:QIHI (match_dup 0)))] UNSPEC_ATOMIC))
984 (set (reg:SI T_REG) (const_int 1))
985 (clobber (reg:SI R0_REG))
986 (clobber (match_scratch:SI 1 "=&r"))
987 (clobber (match_scratch:SI 2 "=0"))]
988 "TARGET_ATOMIC_HARD_LLCS"
989 {
990 return "\r mov #-4,%1" "\n"
991 " and %0,%1" "\n"
992 " xor %1,%0" "\n"
993 " add r15,%0" "\n"
994 " add #-4,%0" "\n"
995 "0: movli.l @%1,r0" "\n"
996 " mov.l r0,@-r15" "\n"
997 " mov.<bw> @%0,r0" "\n"
998 " not r0,r0" "\n"
999 " mov.<bw> r0,@%0" "\n"
1000 " mov.l @r15+,r0" "\n"
1001 " movco.l r0,@%1" "\n"
1002 " bf 0b";
1003 }
1004 [(set_attr "length" "26")])
1006 (define_insn_and_split "atomic_fetch_<fetchop_name><mode>_soft_gusa"
1007 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&u")
1008 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=AraAdd"))
1009 (set (match_dup 1)
1010 (unspec:QIHISI
1011 [(FETCHOP:QIHISI
1012 (match_dup 1)
1013 (match_operand:QIHISI 2 "<fetchop_predicate_1>"
1014 "<fetchop_constraint_1_gusa>"))]
1015 UNSPEC_ATOMIC))
1016 (clobber (match_scratch:QIHISI 3 "=&u"))
1017 (clobber (reg:SI R0_REG))
1018 (clobber (reg:SI R1_REG))]
1019 "TARGET_ATOMIC_SOFT_GUSA"
1020 {
1021 return "\r mova 1f,r0" "\n"
1022 " .align 2" "\n"
1023 " mov r15,r1" "\n"
1024 " mov #(0f-1f),r15" "\n"
1025 "0: mov.<bwl> %1,%0" "\n"
1026 " mov %0,%3" "\n"
1027 " <fetchop_name> %2,%3" "\n"
1028 " mov.<bwl> %3,%1" "\n"
1029 "1: mov r1,r15";
1030 }
1031 "&& can_create_pseudo_p () && optimize
1032 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1033 [(const_int 0)]
1034 {
1035 emit_insn (gen_atomic_<fetchop_name>_fetch<mode>_soft_gusa (
1036 gen_reg_rtx (<MODE>mode), operands[1], operands[2]));
1037 }
1038 [(set_attr "length" "18")])
1040 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1041 (define_insn_and_split "atomic_fetch_not<mode>_soft_gusa"
1042 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&u")
1043 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=AraAdd"))
1044 (set (match_dup 1)
1045 (unspec:QIHISI [(not:QIHISI (match_dup 1))] UNSPEC_ATOMIC))
1046 (clobber (match_scratch:QIHISI 2 "=&u"))
1047 (clobber (reg:SI R0_REG))
1048 (clobber (reg:SI R1_REG))]
1049 "TARGET_ATOMIC_SOFT_GUSA"
1050 {
1051 return "\r mova 1f,r0" "\n"
1052 " mov r15,r1" "\n"
1053 " .align 2" "\n"
1054 " mov #(0f-1f),r15" "\n"
1055 "0: mov.<bwl> %1,%0" "\n"
1056 " not %0,%2" "\n"
1057 " mov.<bwl> %2,%1" "\n"
1058 "1: mov r1,r15";
1059 }
1060 "&& can_create_pseudo_p () && optimize
1061 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1062 [(const_int 0)]
1063 {
1064 emit_insn (gen_atomic_not_fetch<mode>_soft_gusa (gen_reg_rtx (<MODE>mode),
1065 operands[1]));
1066 }
1067 [(set_attr "length" "16")])
1069 (define_insn_and_split "atomic_fetch_<fetchop_name><mode>_soft_tcb"
1070 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1071 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd"))
1072 (set (match_dup 1)
1073 (unspec:QIHISI
1074 [(FETCHOP:QIHISI
1075 (match_dup 1)
1076 (match_operand:QIHISI 2 "<fetchop_predicate_1>"
1077 "<fetchop_constraint_1_tcb>"))]
1078 UNSPEC_ATOMIC))
1079 (use (match_operand:SI 3 "gbr_displacement"))
1080 (clobber (reg:SI R0_REG))
1081 (clobber (reg:SI R1_REG))]
1082 "TARGET_ATOMIC_SOFT_TCB"
1083 {
1084 return "\r mova 1f,r0" "\n"
1085 " .align 2" "\n"
1086 " mov #(0f-1f),r1" "\n"
1087 " mov.l r0,@(%O3,gbr)" "\n"
1088 "0: mov.<bwl> %1,r0" "\n"
1089 " mov r0,%0" "\n"
1090 " <fetchop_name> %2,r0" "\n"
1091 " mov.<bwl> r0,%1" "\n"
1092 "1: mov #0,r0" "\n"
1093 " mov.l r0,@(%O3,gbr)";
1094 }
1095 "&& can_create_pseudo_p () && optimize
1096 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1097 [(const_int 0)]
1098 {
1099 emit_insn (gen_atomic_<fetchop_name><mode>_soft_tcb (
1100 operands[1], operands[2], operands[3]));
1101 }
1102 [(set_attr "length" "20")])
1104 (define_insn "atomic_<fetchop_name><mode>_soft_tcb"
1105 [(set (match_operand:QIHISI 0 "atomic_mem_operand_1" "=SraSdd")
1106 (unspec:QIHISI
1107 [(FETCHOP:QIHISI
1108 (match_dup 0)
1109 (match_operand:QIHISI 1 "<fetchop_predicate_1>"
1110 "<fetchop_constraint_1_tcb>"))]
1111 UNSPEC_ATOMIC))
1112 (use (match_operand:SI 2 "gbr_displacement"))
1113 (clobber (reg:SI R0_REG))
1114 (clobber (reg:SI R1_REG))]
1115 "TARGET_ATOMIC_SOFT_TCB"
1116 {
1117 return "\r mova 1f,r0" "\n"
1118 " mov #(0f-1f),r1" "\n"
1119 " .align 2" "\n"
1120 " mov.l r0,@(%O2,gbr)" "\n"
1121 "0: mov.<bwl> %0,r0" "\n"
1122 " <fetchop_name> %1,r0" "\n"
1123 " mov.<bwl> r0,%0" "\n"
1124 "1: mov #0,r0" "\n"
1125 " mov.l r0,@(%O2,gbr)";
1126 }
1127 [(set_attr "length" "18")])
1129 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1130 (define_insn_and_split "atomic_fetch_not<mode>_soft_tcb"
1131 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1132 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd"))
1133 (set (match_dup 1)
1134 (unspec:QIHISI [(not:QIHISI (match_dup 1))] UNSPEC_ATOMIC))
1135 (use (match_operand:SI 2 "gbr_displacement"))
1136 (clobber (reg:SI R0_REG))
1137 (clobber (reg:SI R1_REG))]
1138 "TARGET_ATOMIC_SOFT_TCB"
1139 {
1140 return "\r mova 1f,r0" "\n"
1141 " .align 2" "\n"
1142 " mov #(0f-1f),r1" "\n"
1143 " mov.l r0,@(%O2,gbr)" "\n"
1144 "0: mov.<bwl> %1,r0" "\n"
1145 " mov r0,%0" "\n"
1146 " not r0,r0" "\n"
1147 " mov.<bwl> r0,%1" "\n"
1148 "1: mov #0,r0" "\n"
1149 " mov.l r0,@(%O2,gbr)";
1150 }
1151 "&& can_create_pseudo_p () && optimize
1152 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1153 [(const_int 0)]
1154 {
1155 emit_insn (gen_atomic_not<mode>_soft_tcb (operands[1], operands[2]));
1156 }
1157 [(set_attr "length" "20")])
1159 (define_insn "atomic_not<mode>_soft_tcb"
1160 [(set (match_operand:QIHISI 0 "atomic_mem_operand_1" "=SraSdd")
1161 (unspec:QIHISI [(not:QIHISI (match_dup 0))] UNSPEC_ATOMIC))
1162 (use (match_operand:SI 1 "gbr_displacement"))
1163 (clobber (reg:SI R0_REG))
1164 (clobber (reg:SI R1_REG))]
1165 "TARGET_ATOMIC_SOFT_TCB"
1166 {
1167 return "\r mova 1f,r0" "\n"
1168 " mov #(0f-1f),r1" "\n"
1169 " .align 2" "\n"
1170 " mov.l r0,@(%O1,gbr)" "\n"
1171 "0: mov.<bwl> %0,r0" "\n"
1172 " not r0,r0" "\n"
1173 " mov.<bwl> r0,%0" "\n"
1174 "1: mov #0,r0" "\n"
1175 " mov.l r0,@(%O1,gbr)";
1176 }
1177 [(set_attr "length" "18")])
1179 (define_insn_and_split "atomic_fetch_<fetchop_name><mode>_soft_imask"
1180 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1181 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd"))
1182 (set (match_dup 1)
1183 (unspec:QIHISI
1184 [(FETCHOP:QIHISI
1185 (match_dup 1)
1186 (match_operand:QIHISI 2 "<fetchop_predicate_1>"
1187 "<fetchop_constraint_1_imask>"))]
1188 UNSPEC_ATOMIC))
1189 (clobber (reg:SI R0_REG))
1190 (clobber (match_scratch:QIHISI 3 "=&r"))]
1191 "TARGET_ATOMIC_SOFT_IMASK"
1192 {
1193 return "\r stc sr,r0" "\n"
1194 " mov r0,%3" "\n"
1195 " or #0xF0,r0" "\n"
1196 " ldc r0,sr" "\n"
1197 " mov.<bwl> %1,r0" "\n"
1198 " mov r0,%0" "\n"
1199 " <fetchop_name> %2,r0" "\n"
1200 " mov.<bwl> r0,%1" "\n"
1201 " ldc %3,sr";
1202 }
1203 "&& can_create_pseudo_p () && optimize
1204 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1205 [(const_int 0)]
1206 {
1207 emit_insn (gen_atomic_<fetchop_name>_fetch<mode>_soft_imask (
1208 gen_reg_rtx (<MODE>mode), operands[1], operands[2]));
1209 }
1210 [(set_attr "length" "18")])
1212 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1213 (define_insn_and_split "atomic_fetch_not<mode>_soft_imask"
1214 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1215 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd"))
1216 (set (match_dup 1)
1217 (unspec:QIHISI [(not:QIHISI (match_dup 1))] UNSPEC_ATOMIC))
1218 (clobber (reg:SI R0_REG))
1219 (clobber (match_scratch:QIHISI 2 "=&r"))]
1220 "TARGET_ATOMIC_SOFT_IMASK"
1221 {
1222 return "\r stc sr,r0" "\n"
1223 " mov r0,%2" "\n"
1224 " or #0xF0,r0" "\n"
1225 " ldc r0,sr" "\n"
1226 " mov.<bwl> %1,r0" "\n"
1227 " mov r0,%0" "\n"
1228 " not r0,r0" "\n"
1229 " mov.<bwl> r0,%1" "\n"
1230 " ldc %2,sr";
1231 }
1232 "&& can_create_pseudo_p () && optimize
1233 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1234 [(const_int 0)]
1235 {
1236 emit_insn (gen_atomic_not_fetch<mode>_soft_imask (gen_reg_rtx (<MODE>mode),
1237 operands[1]));
1238 }
1239 [(set_attr "length" "18")])
1241 (define_expand "atomic_fetch_nand<mode>"
1242 [(set (match_operand:QIHISI 0 "arith_reg_dest")
1243 (match_operand:QIHISI 1 "atomic_mem_operand_1"))
1244 (set (match_dup 1)
1245 (unspec:QIHISI
1246 [(not:QIHISI (and:QIHISI (match_dup 1)
1247 (match_operand:QIHISI 2 "atomic_logical_operand_1")))]
1248 UNSPEC_ATOMIC))
1249 (match_operand:SI 3 "const_int_operand")]
1250 "TARGET_ATOMIC_ANY"
1251 {
1252 rtx mem = operands[1];
1253 rtx atomic_insn;
1255 if (TARGET_ATOMIC_HARD_LLCS
1256 || (TARGET_SH4A && <MODE>mode == SImode && !TARGET_ATOMIC_STRICT))
1257 atomic_insn = gen_atomic_fetch_nand<mode>_hard (operands[0], mem,
1258 operands[2]);
1259 else if (TARGET_ATOMIC_SOFT_GUSA)
1260 atomic_insn = gen_atomic_fetch_nand<mode>_soft_gusa (operands[0], mem,
1261 operands[2]);
1262 else if (TARGET_ATOMIC_SOFT_TCB)
1263 atomic_insn = gen_atomic_fetch_nand<mode>_soft_tcb (operands[0], mem,
1264 operands[2], TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX);
1265 else if (TARGET_ATOMIC_SOFT_IMASK)
1266 atomic_insn = gen_atomic_fetch_nand<mode>_soft_imask (operands[0], mem,
1267 operands[2]);
1268 else
1269 FAIL;
1271 emit_insn (atomic_insn);
1273 if (<MODE>mode == QImode)
1274 emit_insn (gen_zero_extendqisi2 (gen_lowpart (SImode, operands[0]),
1275 operands[0]));
1276 else if (<MODE>mode == HImode)
1277 emit_insn (gen_zero_extendhisi2 (gen_lowpart (SImode, operands[0]),
1278 operands[0]));
1279 DONE;
1280 })
1282 (define_insn_and_split "atomic_fetch_nandsi_hard"
1283 [(set (match_operand:SI 0 "arith_reg_dest" "=&r")
1284 (match_operand:SI 1 "atomic_mem_operand_1" "=Sra"))
1285 (set (match_dup 1)
1286 (unspec:SI
1287 [(not:SI (and:SI (match_dup 1)
1288 (match_operand:SI 2 "logical_operand" "rK08")))]
1289 UNSPEC_ATOMIC))
1290 (set (reg:SI T_REG) (const_int 1))
1291 (clobber (reg:SI R0_REG))]
1292 "TARGET_ATOMIC_HARD_LLCS
1293 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
1294 {
1295 return "\r0: movli.l %1,r0" "\n"
1296 " mov r0,%0" "\n"
1297 " and %2,r0" "\n"
1298 " not r0,r0" "\n"
1299 " movco.l r0,%1" "\n"
1300 " bf 0b";
1301 }
1302 "&& can_create_pseudo_p () && optimize
1303 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1304 [(const_int 0)]
1305 {
1306 emit_insn (gen_atomic_nand_fetchsi_hard (gen_reg_rtx (SImode), operands[1],
1307 operands[2]));
1308 }
1309 [(set_attr "length" "12")])
1311 ;; The QIHImode llcs patterns modify the address register of the memory
1312 ;; operand. In order to express that, we have to open code the memory
1313 ;; operand. Initially the insn is expanded like every other atomic insn
1314 ;; using the memory operand. In split1 the insn is converted and the
1315 ;; memory operand's address register is exposed.
1316 (define_insn_and_split "atomic_fetch_nand<mode>_hard"
1317 [(set (match_operand:QIHI 0 "arith_reg_dest")
1318 (match_operand:QIHI 1 "atomic_mem_operand_1"))
1319 (set (match_dup 1)
1320 (unspec:QIHI
1321 [(not:QIHI (and:QIHI (match_dup 1)
1322 (match_operand:QIHI 2 "logical_operand" "rK08")))]
1323 UNSPEC_ATOMIC))
1324 (set (reg:SI T_REG) (const_int 1))
1325 (clobber (reg:SI R0_REG))]
1326 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
1327 "#"
1328 "&& 1"
1329 [(const_int 0)]
1330 {
1331 if (optimize
1332 && sh_reg_dead_or_unused_after_insn (curr_insn, REGNO (operands[0])))
1333 emit_insn (gen_atomic_nand<mode>_hard (operands[1], operands[2]));
1334 else
1335 {
1336 rtx i = gen_atomic_fetch_nand<mode>_hard_1 (
1337 operands[0], XEXP (operands[1], 0), operands[2]);
1339 /* Replace the new mems in the new insn with the old mem to preserve
1340 aliasing info. */
1341 XEXP (XVECEXP (i, 0, 0), 1) = operands[1];
1342 XEXP (XVECEXP (i, 0, 1), 0) = operands[1];
1343 XEXP (XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 1), 1), 0, 0), 0),
1344 0) = operands[1];
1345 emit_insn (i);
1346 }
1347 })
1349 (define_insn "atomic_fetch_nand<mode>_hard_1"
1350 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
1351 (mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r")))
1352 (set (mem:QIHI (match_dup 1))
1353 (unspec:QIHI
1354 [(not:QIHI (and:QIHI (mem:QIHI (match_dup 1))
1355 (match_operand:QIHI 2 "logical_operand" "rK08")))]
1356 UNSPEC_ATOMIC))
1357 (set (reg:SI T_REG) (const_int 1))
1358 (clobber (reg:SI R0_REG))
1359 (clobber (match_scratch:SI 3 "=&r"))
1360 (clobber (match_scratch:SI 4 "=1"))]
1361 "TARGET_ATOMIC_HARD_LLCS"
1362 {
1363 return "\r mov #-4,%3" "\n"
1364 " and %1,%3" "\n"
1365 " xor %3,%1" "\n"
1366 " add r15,%1" "\n"
1367 " add #-4,%1" "\n"
1368 "0: movli.l @%3,r0" "\n"
1369 " mov.l r0,@-r15" "\n"
1370 " mov.<bw> @%1,r0" "\n"
1371 " mov r0,%0" "\n"
1372 " and %2,r0" "\n"
1373 " not r0,r0" "\n"
1374 " mov.<bw> r0,@%1" "\n"
1375 " mov.l @r15+,r0" "\n"
1376 " movco.l r0,@%3" "\n"
1377 " bf 0b";
1378 }
1379 [(set_attr "length" "30")])
1381 ;; The QIHImode llcs patterns modify the address register of the memory
1382 ;; operand. In order to express that, we have to open code the memory
1383 ;; operand. Initially the insn is expanded like every other atomic insn
1384 ;; using the memory operand. In split1 the insn is converted and the
1385 ;; memory operand's address register is exposed.
1386 (define_insn_and_split "atomic_nand<mode>_hard"
1387 [(set (match_operand:QIHI 0 "atomic_mem_operand_1")
1388 (unspec:QIHI
1389 [(not:QIHI (and:QIHI (match_dup 0)
1390 (match_operand:QIHI 1 "logical_operand")))]
1391 UNSPEC_ATOMIC))
1392 (set (reg:SI T_REG) (const_int 1))
1393 (clobber (reg:SI R0_REG))]
1394 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
1395 "#"
1396 "&& 1"
1397 [(const_int 0)]
1398 {
1399 rtx i = gen_atomic_nand<mode>_hard_1 (XEXP (operands[0], 0), operands[1]);
1401 /* Replace the new mems in the new insn with the old mem to preserve
1402 aliasing info. */
1403 XEXP (XVECEXP (i, 0, 0), 0) = operands[0];
1404 XEXP (XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 0), 1), 0, 0), 0), 0) = operands[0];
1405 emit_insn (i);
1406 })
1408 (define_insn "atomic_nand<mode>_hard_1"
1409 [(set (mem:QIHI (match_operand:SI 0 "arith_reg_operand" "r"))
1410 (unspec:QIHI
1411 [(not:QIHI (and:QIHI (mem:QIHI (match_dup 0))
1412 (match_operand:QIHI 1 "logical_operand" "rK08")))]
1413 UNSPEC_ATOMIC))
1414 (set (reg:SI T_REG) (const_int 1))
1415 (clobber (reg:SI R0_REG))
1416 (clobber (match_scratch:SI 2 "=&r"))
1417 (clobber (match_scratch:SI 3 "=0"))]
1418 "TARGET_ATOMIC_HARD_LLCS"
1419 {
1420 return "\r mov #-4,%2" "\n"
1421 " and %0,%2" "\n"
1422 " xor %2,%0" "\n"
1423 " add r15,%0" "\n"
1424 " add #-4,%0" "\n"
1425 "0: movli.l @%2,r0" "\n"
1426 " mov.l r0,@-r15" "\n"
1427 " mov.<bw> @%0,r0" "\n"
1428 " and %1,r0" "\n"
1429 " not r0,r0" "\n"
1430 " mov.<bw> r0,@%0" "\n"
1431 " mov.l @r15+,r0" "\n"
1432 " movco.l r0,@%2" "\n"
1433 " bf 0b";
1434 }
1435 [(set_attr "length" "28")])
1437 (define_insn_and_split "atomic_fetch_nand<mode>_soft_gusa"
1438 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&u")
1439 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=AraAdd"))
1440 (set (match_dup 1)
1441 (unspec:QIHISI
1442 [(not:QIHISI
1443 (and:QIHISI (match_dup 1)
1444 (match_operand:QIHISI 2 "arith_reg_operand" "u")))]
1445 UNSPEC_ATOMIC))
1446 (clobber (match_scratch:QIHISI 3 "=&u"))
1447 (clobber (reg:SI R0_REG))
1448 (clobber (reg:SI R1_REG))]
1449 "TARGET_ATOMIC_SOFT_GUSA"
1450 {
1451 return "\r mova 1f,r0" "\n"
1452 " mov r15,r1" "\n"
1453 " .align 2" "\n"
1454 " mov #(0f-1f),r15" "\n"
1455 "0: mov.<bwl> %1,%0" "\n"
1456 " mov %2,%3" "\n"
1457 " and %0,%3" "\n"
1458 " not %3,%3" "\n"
1459 " mov.<bwl> %3,%1" "\n"
1460 "1: mov r1,r15";
1461 }
1462 "&& can_create_pseudo_p () && optimize
1463 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1464 [(const_int 0)]
1465 {
1466 emit_insn (gen_atomic_nand_fetch<mode>_soft_gusa (gen_reg_rtx (<MODE>mode),
1467 operands[1], operands[2]));
1468 }
1469 [(set_attr "length" "20")])
1471 (define_insn_and_split "atomic_fetch_nand<mode>_soft_tcb"
1472 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1473 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd"))
1474 (set (match_dup 1)
1475 (unspec:QIHISI
1476 [(not:QIHISI
1477 (and:QIHISI (match_dup 1)
1478 (match_operand:QIHISI 2 "logical_operand" "rK08")))]
1479 UNSPEC_ATOMIC))
1480 (use (match_operand:SI 3 "gbr_displacement"))
1481 (clobber (reg:SI R0_REG))
1482 (clobber (reg:SI R1_REG))]
1483 "TARGET_ATOMIC_SOFT_TCB"
1484 {
1485 return "\r mova 1f,r0" "\n"
1486 " mov #(0f-1f),r1" "\n"
1487 " .align 2" "\n"
1488 " mov.l r0,@(%O3,gbr)" "\n"
1489 "0: mov.<bwl> %1,r0" "\n"
1490 " mov r0,%0" "\n"
1491 " and %2,r0" "\n"
1492 " not r0,r0" "\n"
1493 " mov.<bwl> r0,%1" "\n"
1494 "1: mov #0,r0" "\n"
1495 " mov.l r0,@(%O3,gbr)";
1496 }
1497 "&& can_create_pseudo_p () && optimize
1498 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1499 [(const_int 0)]
1500 {
1501 emit_insn (gen_atomic_nand<mode>_soft_tcb (operands[1], operands[2],
1502 operands[3]));
1503 }
1504 [(set_attr "length" "22")])
1506 (define_insn "atomic_nand<mode>_soft_tcb"
1507 [(set (match_operand:QIHISI 0 "atomic_mem_operand_1" "=SraSdd")
1508 (unspec:QIHISI
1509 [(not:QIHISI
1510 (and:QIHISI (match_dup 0)
1511 (match_operand:QIHISI 1 "logical_operand" "rK08")))]
1512 UNSPEC_ATOMIC))
1513 (use (match_operand:SI 2 "gbr_displacement"))
1514 (clobber (reg:SI R0_REG))
1515 (clobber (reg:SI R1_REG))]
1516 "TARGET_ATOMIC_SOFT_TCB"
1517 {
1518 return "\r mova 1f,r0" "\n"
1519 " .align 2" "\n"
1520 " mov #(0f-1f),r1" "\n"
1521 " mov.l r0,@(%O2,gbr)" "\n"
1522 "0: mov.<bwl> %0,r0" "\n"
1523 " and %1,r0" "\n"
1524 " not r0,r0" "\n"
1525 " mov.<bwl> r0,%0" "\n"
1526 "1: mov #0,r0" "\n"
1527 " mov.l r0,@(%O2,gbr)";
1528 }
1529 [(set_attr "length" "20")])
1531 (define_insn_and_split "atomic_fetch_nand<mode>_soft_imask"
1532 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1533 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd"))
1534 (set (match_dup 1)
1535 (unspec:QIHISI
1536 [(not:QIHISI
1537 (and:QIHISI (match_dup 1)
1538 (match_operand:QIHISI 2 "logical_operand" "rK08")))]
1539 UNSPEC_ATOMIC))
1540 (clobber (reg:SI R0_REG))
1541 (clobber (match_scratch:SI 3 "=&r"))]
1542 "TARGET_ATOMIC_SOFT_IMASK"
1543 {
1544 return "\r stc sr,r0" "\n"
1545 " mov r0,%3" "\n"
1546 " or #0xF0,r0" "\n"
1547 " ldc r0,sr" "\n"
1548 " mov.<bwl> %1,r0" "\n"
1549 " mov r0,%0" "\n"
1550 " and %2,r0" "\n"
1551 " not r0,r0" "\n"
1552 " mov.<bwl> r0,%1" "\n"
1553 " ldc %3,sr";
1554 }
1555 "&& can_create_pseudo_p () && optimize
1556 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1557 [(const_int 0)]
1558 {
1559 emit_insn (gen_atomic_nand_fetch<mode>_soft_imask (gen_reg_rtx (<MODE>mode),
1560 operands[1], operands[2]));
1561 }
1562 [(set_attr "length" "20")])
1564 ;;------------------------------------------------------------------------------
1565 ;; read - add|sub|or|and|xor|nand - write - return new value
1567 (define_expand "atomic_<fetchop_name>_fetch<mode>"
1568 [(set (match_operand:QIHISI 0 "arith_reg_dest")
1569 (FETCHOP:QIHISI
1570 (match_operand:QIHISI 1 "atomic_mem_operand_1")
1571 (match_operand:QIHISI 2 "<fetchop_predicate_1>")))
1572 (set (match_dup 1)
1573 (unspec:QIHISI
1574 [(FETCHOP:QIHISI (match_dup 1) (match_dup 2))]
1575 UNSPEC_ATOMIC))
1576 (match_operand:SI 3 "const_int_operand" "")]
1577 "TARGET_ATOMIC_ANY"
1578 {
1579 rtx mem = operands[1];
1580 rtx atomic_insn;
1582 if (TARGET_ATOMIC_HARD_LLCS
1583 || (TARGET_SH4A && <MODE>mode == SImode && !TARGET_ATOMIC_STRICT))
1584 atomic_insn = gen_atomic_<fetchop_name>_fetch<mode>_hard (operands[0], mem,
1585 operands[2]);
1586 else if (TARGET_ATOMIC_SOFT_GUSA)
1587 atomic_insn = gen_atomic_<fetchop_name>_fetch<mode>_soft_gusa (operands[0],
1588 mem, operands[2]);
1589 else if (TARGET_ATOMIC_SOFT_TCB)
1590 atomic_insn = gen_atomic_<fetchop_name>_fetch<mode>_soft_tcb (operands[0],
1591 mem, operands[2], TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX);
1592 else if (TARGET_ATOMIC_SOFT_IMASK)
1593 atomic_insn = gen_atomic_<fetchop_name>_fetch<mode>_soft_imask (operands[0],
1594 mem, operands[2]);
1595 else
1596 FAIL;
1598 emit_insn (atomic_insn);
1600 if (<MODE>mode == QImode)
1601 emit_insn (gen_zero_extendqisi2 (gen_lowpart (SImode, operands[0]),
1602 operands[0]));
1603 else if (<MODE>mode == HImode)
1604 emit_insn (gen_zero_extendhisi2 (gen_lowpart (SImode, operands[0]),
1605 operands[0]));
1606 DONE;
1607 })
1609 (define_insn "atomic_<fetchop_name>_fetchsi_hard"
1610 [(set (match_operand:SI 0 "arith_reg_dest" "=&z")
1611 (FETCHOP:SI
1612 (match_operand:SI 1 "atomic_mem_operand_1" "=Sra")
1613 (match_operand:SI 2 "<fetchop_predicate_1>"
1614 "<fetchop_constraint_1_llcs>")))
1615 (set (match_dup 1)
1616 (unspec:SI
1617 [(FETCHOP:SI (match_dup 1) (match_dup 2))]
1618 UNSPEC_ATOMIC))
1619 (set (reg:SI T_REG) (const_int 1))]
1620 "TARGET_ATOMIC_HARD_LLCS
1621 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
1622 {
1623 return "\r0: movli.l %1,%0" "\n"
1624 " <fetchop_name> %2,%0" "\n"
1625 " movco.l %0,%1" "\n"
1626 " bf 0b";
1627 }
1628 [(set_attr "length" "8")])
1630 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1631 (define_insn "atomic_not_fetchsi_hard"
1632 [(set (match_operand:SI 0 "arith_reg_dest" "=&z")
1633 (not:SI (match_operand:SI 1 "atomic_mem_operand_1" "=Sra")))
1634 (set (match_dup 1)
1635 (unspec:SI [(not:SI (match_dup 1))] UNSPEC_ATOMIC))
1636 (set (reg:SI T_REG) (const_int 1))]
1637 "TARGET_ATOMIC_HARD_LLCS
1638 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
1639 {
1640 return "\r0: movli.l %1,%0" "\n"
1641 " not %0,%0" "\n"
1642 " movco.l %0,%1" "\n"
1643 " bf 0b";
1644 }
1645 [(set_attr "length" "8")])
1647 ;; The QIHImode llcs patterns modify the address register of the memory
1648 ;; operand. In order to express that, we have to open code the memory
1649 ;; operand. Initially the insn is expanded like every other atomic insn
1650 ;; using the memory operand. In split1 the insn is converted and the
1651 ;; memory operand's address register is exposed.
1652 (define_insn_and_split "atomic_<fetchop_name>_fetch<mode>_hard"
1653 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
1654 (FETCHOP:QIHI (match_operand:QIHI 1 "atomic_mem_operand_1")
1655 (match_operand:QIHI 2 "<fetchop_predicate_1>")))
1656 (set (match_dup 1) (unspec:QIHI [(FETCHOP:QIHI (match_dup 1) (match_dup 2))]
1657 UNSPEC_ATOMIC))
1658 (set (reg:SI T_REG) (const_int 1))
1659 (clobber (reg:SI R0_REG))]
1660 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
1661 "#"
1662 "&& 1"
1663 [(const_int 0)]
1664 {
1665 if (optimize
1666 && sh_reg_dead_or_unused_after_insn (curr_insn, REGNO (operands[0])))
1667 emit_insn (gen_atomic_<fetchop_name><mode>_hard (operands[1], operands[2]));
1668 else
1669 {
1670 rtx i = gen_atomic_<fetchop_name>_fetch<mode>_hard_1 (
1671 operands[0], XEXP (operands[1], 0), operands[2]);
1673 /* Replace the new mems in the new insn with the old mem to preserve
1674 aliasing info. */
1675 XEXP (XEXP (XVECEXP (i, 0, 0), 1), 0) = operands[1];
1676 XEXP (XVECEXP (i, 0, 1), 0) = operands[1];
1677 XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 1), 1), 0, 0), 0) = operands[1];
1678 emit_insn (i);
1679 }
1680 })
1682 (define_insn "atomic_<fetchop_name>_fetch<mode>_hard_1"
1683 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
1684 (FETCHOP:QIHI
1685 (mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r"))
1686 (match_operand:QIHI 2 "<fetchop_predicate_1>"
1687 "<fetchop_constraint_1_llcs>")))
1688 (set (mem:QIHI (match_dup 1))
1689 (unspec:QIHI
1690 [(FETCHOP:QIHI (mem:QIHI (match_dup 1)) (match_dup 2))]
1691 UNSPEC_ATOMIC))
1692 (set (reg:SI T_REG) (const_int 1))
1693 (clobber (reg:SI R0_REG))
1694 (clobber (match_scratch:SI 3 "=&r"))
1695 (clobber (match_scratch:SI 4 "=1"))]
1696 "TARGET_ATOMIC_HARD_LLCS"
1697 {
1698 return "\r mov #-4,%3" "\n"
1699 " and %1,%3" "\n"
1700 " xor %3,%1" "\n"
1701 " add r15,%1" "\n"
1702 " add #-4,%1" "\n"
1703 "0: movli.l @%3,r0" "\n"
1704 " mov.l r0,@-r15" "\n"
1705 " mov.<bw> @%1,r0" "\n"
1706 " <fetchop_name> %2,r0" "\n"
1707 " mov.<bw> r0,@%1" "\n"
1708 " mov r0,%0" "\n"
1709 " mov.l @r15+,r0" "\n"
1710 " movco.l r0,@%3" "\n"
1711 " bf 0b";
1712 }
1713 [(set_attr "length" "28")])
1715 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1716 (define_insn_and_split "atomic_not_fetch<mode>_hard"
1717 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
1718 (not:QIHI (mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r"))))
1719 (set (mem:QIHI (match_dup 1))
1720 (unspec:QIHI [(not:QIHI (mem:QIHI (match_dup 1)))] UNSPEC_ATOMIC))
1721 (set (reg:SI T_REG) (const_int 1))
1722 (clobber (reg:SI R0_REG))
1723 (clobber (match_scratch:SI 2 "=&r"))
1724 (clobber (match_scratch:SI 3 "=1"))]
1725 "TARGET_ATOMIC_HARD_LLCS"
1726 {
1727 return "\r mov #-4,%2" "\n"
1728 " and %1,%2" "\n"
1729 " xor %2,%1" "\n"
1730 " add r15,%1" "\n"
1731 " add #-4,%1" "\n"
1732 "0: movli.l @%2,r0" "\n"
1733 " mov.l r0,@-r15" "\n"
1734 " mov.<bw> @%1,r0" "\n"
1735 " not r0,r0" "\n"
1736 " mov.<bw> r0,@%1" "\n"
1737 " mov r0,%0" "\n"
1738 " mov.l @r15+,r0" "\n"
1739 " movco.l r0,@%2" "\n"
1740 " bf 0b";
1741 }
1742 "&& can_create_pseudo_p () && optimize
1743 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1744 [(const_int 0)]
1745 {
1746 rtx i = gen_atomic_not<mode>_hard (operands[1]);
1748 /* Replace the new mems in the new insn with the old mem to preserve
1749 aliasing info. */
1750 rtx m = XEXP (XEXP (XVECEXP (PATTERN (curr_insn), 0, 0), 1), 0);
1751 XEXP (XVECEXP (i, 0, 0), 0) = m;
1752 XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 0), 1), 0, 0), 0) = m;
1753 emit_insn (i);
1754 }
1755 [(set_attr "length" "28")])
1757 (define_insn "atomic_<fetchop_name>_fetch<mode>_soft_gusa"
1758 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&u")
1759 (FETCHOP:QIHISI
1760 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=AraAdd")
1761 (match_operand:QIHISI 2 "<fetchop_predicate_1>"
1762 "<fetchop_constraint_1_gusa>")))
1763 (set (match_dup 1)
1764 (unspec:QIHISI
1765 [(FETCHOP:QIHISI (match_dup 1) (match_dup 2))]
1766 UNSPEC_ATOMIC))
1767 (clobber (reg:SI R0_REG))
1768 (clobber (reg:SI R1_REG))]
1769 "TARGET_ATOMIC_SOFT_GUSA"
1770 {
1771 return "\r mova 1f,r0" "\n"
1772 " mov r15,r1" "\n"
1773 " .align 2" "\n"
1774 " mov #(0f-1f),r15" "\n"
1775 "0: mov.<bwl> %1,%0" "\n"
1776 " <fetchop_name> %2,%0" "\n"
1777 " mov.<bwl> %0,%1" "\n"
1778 "1: mov r1,r15";
1779 }
1780 [(set_attr "length" "16")])
1782 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1783 (define_insn "atomic_not_fetch<mode>_soft_gusa"
1784 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&u")
1785 (not:QIHISI (match_operand:QIHISI 1 "atomic_mem_operand_1" "=AraAdd")))
1786 (set (match_dup 1)
1787 (unspec:QIHISI [(not:QIHISI (match_dup 1))] UNSPEC_ATOMIC))
1788 (clobber (reg:SI R0_REG))
1789 (clobber (reg:SI R1_REG))]
1790 "TARGET_ATOMIC_SOFT_GUSA"
1791 {
1792 return "\r mova 1f,r0" "\n"
1793 " mov r15,r1" "\n"
1794 " .align 2" "\n"
1795 " mov #(0f-1f),r15" "\n"
1796 "0: mov.<bwl> %1,%0" "\n"
1797 " not %0,%0" "\n"
1798 " mov.<bwl> %0,%1" "\n"
1799 "1: mov r1,r15";
1800 }
1801 [(set_attr "length" "16")])
1803 (define_insn_and_split "atomic_<fetchop_name>_fetch<mode>_soft_tcb"
1804 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1805 (FETCHOP:QIHISI
1806 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd")
1807 (match_operand:QIHISI 2 "<fetchop_predicate_1>"
1808 "<fetchop_constraint_1_tcb>")))
1809 (set (match_dup 1)
1810 (unspec:QIHISI
1811 [(FETCHOP:QIHISI (match_dup 1) (match_dup 2))]
1812 UNSPEC_ATOMIC))
1813 (clobber (reg:SI R0_REG))
1814 (clobber (reg:SI R1_REG))
1815 (use (match_operand:SI 3 "gbr_displacement"))]
1816 "TARGET_ATOMIC_SOFT_TCB"
1817 {
1818 return "\r mova 1f,r0" "\n"
1819 " mov #(0f-1f),r1" "\n"
1820 " .align 2" "\n"
1821 " mov.l r0,@(%O3,gbr)" "\n"
1822 "0: mov.<bwl> %1,r0" "\n"
1823 " <fetchop_name> %2,r0" "\n"
1824 " mov.<bwl> r0,%1" "\n"
1825 "1: mov r0,%0" "\n"
1826 " mov #0,r0" "\n"
1827 " mov.l r0,@(%O3,gbr)";
1828 }
1829 "&& can_create_pseudo_p () && optimize
1830 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1831 [(const_int 0)]
1832 {
1833 emit_insn (gen_atomic_<fetchop_name><mode>_soft_tcb (
1834 operands[1], operands[2], operands[3]));
1835 }
1836 [(set_attr "length" "20")])
1838 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1839 (define_insn_and_split "atomic_not_fetch<mode>_soft_tcb"
1840 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
1841 (not:QIHISI (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd")))
1842 (set (match_dup 1)
1843 (unspec:QIHISI [(not:QIHISI (match_dup 1))] UNSPEC_ATOMIC))
1844 (clobber (reg:SI R0_REG))
1845 (clobber (reg:SI R1_REG))
1846 (use (match_operand:SI 2 "gbr_displacement"))]
1847 "TARGET_ATOMIC_SOFT_TCB"
1848 {
1849 return "\r mova 1f,r0" "\n"
1850 " mov #(0f-1f),r1" "\n"
1851 " .align 2" "\n"
1852 " mov.l r0,@(%O2,gbr)" "\n"
1853 "0: mov.<bwl> %1,r0" "\n"
1854 " not r0,r0" "\n"
1855 " mov.<bwl> r0,%1" "\n"
1856 "1: mov r0,%0" "\n"
1857 " mov #0,r0" "\n"
1858 " mov.l r0,@(%O2,gbr)";
1859 }
1860 "&& can_create_pseudo_p () && optimize
1861 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
1862 [(const_int 0)]
1863 {
1864 emit_insn (gen_atomic_not<mode>_soft_tcb (operands[1], operands[2]));
1865 }
1866 [(set_attr "length" "20")])
1868 (define_insn "atomic_<fetchop_name>_fetch<mode>_soft_imask"
1869 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&z")
1870 (FETCHOP:QIHISI
1871 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd")
1872 (match_operand:QIHISI 2 "<fetchop_predicate_1>"
1873 "<fetchop_constraint_1_imask>")))
1874 (set (match_dup 1)
1875 (unspec:QIHISI
1876 [(FETCHOP:QIHISI (match_dup 1) (match_dup 2))]
1877 UNSPEC_ATOMIC))
1878 (clobber (match_scratch:SI 3 "=&r"))]
1879 "TARGET_ATOMIC_SOFT_IMASK"
1880 {
1881 return "\r stc sr,%0" "\n"
1882 " mov %0,%3" "\n"
1883 " or #0xF0,%0" "\n"
1884 " ldc %0,sr" "\n"
1885 " mov.<bwl> %1,%0" "\n"
1886 " <fetchop_name> %2,%0" "\n"
1887 " mov.<bwl> %0,%1" "\n"
1888 " ldc %3,sr";
1889 }
1890 [(set_attr "length" "16")])
1892 ;; Combine pattern for xor (val, -1) / nand (val, -1).
1893 (define_insn "atomic_not_fetch<mode>_soft_imask"
1894 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&z")
1895 (not:QIHISI (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd")))
1896 (set (match_dup 1)
1897 (unspec:QIHISI [(not:QIHISI (match_dup 1))] UNSPEC_ATOMIC))
1898 (clobber (match_scratch:SI 2 "=&r"))]
1899 "TARGET_ATOMIC_SOFT_IMASK"
1900 {
1901 return "\r stc sr,%0" "\n"
1902 " mov %0,%2" "\n"
1903 " or #0xF0,%0" "\n"
1904 " ldc %0,sr" "\n"
1905 " mov.<bwl> %1,%0" "\n"
1906 " not %0,%0" "\n"
1907 " mov.<bwl> %0,%1" "\n"
1908 " ldc %2,sr";
1909 }
1910 [(set_attr "length" "16")])
1912 (define_expand "atomic_nand_fetch<mode>"
1913 [(set (match_operand:QIHISI 0 "arith_reg_dest")
1914 (not:QIHISI (and:QIHISI
1915 (match_operand:QIHISI 1 "atomic_mem_operand_1")
1916 (match_operand:QIHISI 2 "atomic_logical_operand_1"))))
1917 (set (match_dup 1)
1918 (unspec:QIHISI
1919 [(not:QIHISI (and:QIHISI (match_dup 1) (match_dup 2)))]
1920 UNSPEC_ATOMIC))
1921 (match_operand:SI 3 "const_int_operand")]
1922 "TARGET_ATOMIC_ANY"
1923 {
1924 rtx mem = operands[1];
1925 rtx atomic_insn;
1927 if (TARGET_ATOMIC_HARD_LLCS
1928 || (TARGET_SH4A && <MODE>mode == SImode && !TARGET_ATOMIC_STRICT))
1929 atomic_insn = gen_atomic_nand_fetch<mode>_hard (operands[0], mem,
1930 operands[2]);
1931 else if (TARGET_ATOMIC_SOFT_GUSA)
1932 atomic_insn = gen_atomic_nand_fetch<mode>_soft_gusa (operands[0], mem,
1933 operands[2]);
1934 else if (TARGET_ATOMIC_SOFT_TCB)
1935 atomic_insn = gen_atomic_nand_fetch<mode>_soft_tcb (operands[0], mem,
1936 operands[2], TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX);
1937 else if (TARGET_ATOMIC_SOFT_IMASK)
1938 atomic_insn = gen_atomic_nand_fetch<mode>_soft_imask (operands[0], mem,
1939 operands[2]);
1940 else
1941 FAIL;
1943 emit_insn (atomic_insn);
1945 if (<MODE>mode == QImode)
1946 emit_insn (gen_zero_extendqisi2 (gen_lowpart (SImode, operands[0]),
1947 operands[0]));
1948 else if (<MODE>mode == HImode)
1949 emit_insn (gen_zero_extendhisi2 (gen_lowpart (SImode, operands[0]),
1950 operands[0]));
1951 DONE;
1952 })
1954 (define_insn "atomic_nand_fetchsi_hard"
1955 [(set (match_operand:SI 0 "arith_reg_dest" "=&z")
1956 (not:SI (and:SI (match_operand:SI 1 "atomic_mem_operand_1" "=Sra")
1957 (match_operand:SI 2 "logical_operand" "rK08"))))
1958 (set (match_dup 1)
1959 (unspec:SI
1960 [(not:SI (and:SI (match_dup 1) (match_dup 2)))]
1961 UNSPEC_ATOMIC))
1962 (set (reg:SI T_REG) (const_int 1))]
1963 "TARGET_ATOMIC_HARD_LLCS
1964 || (TARGET_SH4A && TARGET_ATOMIC_ANY && !TARGET_ATOMIC_STRICT)"
1965 {
1966 return "\r0: movli.l %1,%0" "\n"
1967 " and %2,%0" "\n"
1968 " not %0,%0" "\n"
1969 " movco.l %0,%1" "\n"
1970 " bf 0b";
1971 }
1972 [(set_attr "length" "10")])
1974 ;; The QIHImode llcs patterns modify the address register of the memory
1975 ;; operand. In order to express that, we have to open code the memory
1976 ;; operand. Initially the insn is expanded like every other atomic insn
1977 ;; using the memory operand. In split1 the insn is converted and the
1978 ;; memory operand's address register is exposed.
1979 (define_insn_and_split "atomic_nand_fetch<mode>_hard"
1980 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
1981 (not:QIHI (and:QIHI (match_operand:QIHI 1 "atomic_mem_operand_1")
1982 (match_operand:QIHI 2 "logical_operand"))))
1983 (set (match_dup 1)
1984 (unspec:QIHI [(not:QIHI (and:QIHI (match_dup 1) (match_dup 2)))]
1985 UNSPEC_ATOMIC))
1986 (set (reg:SI T_REG) (const_int 1))
1987 (clobber (reg:SI R0_REG))]
1988 "TARGET_ATOMIC_HARD_LLCS && can_create_pseudo_p ()"
1989 "#"
1990 "&& 1"
1991 [(const_int 0)]
1992 {
1993 if (optimize
1994 && sh_reg_dead_or_unused_after_insn (curr_insn, REGNO (operands[0])))
1995 emit_insn (gen_atomic_nand<mode>_hard (operands[1], operands[2]));
1996 else
1997 {
1998 rtx i = gen_atomic_nand_fetch<mode>_hard_1 (
1999 operands[0], XEXP (operands[1], 0), operands[2]);
2001 /* Replace the new mems in the new insn with the old mem to preserve
2002 aliasing info. */
2003 XEXP (XEXP (XEXP (XVECEXP (i, 0, 0), 1), 0), 0) = operands[1];
2004 XEXP (XVECEXP (i, 0, 1), 0) = operands[1];
2005 XEXP (XEXP (XVECEXP (XEXP (XVECEXP (i, 0, 1), 1), 0, 0), 0),
2006 0) = operands[1];
2007 emit_insn (i);
2008 }
2009 })
2011 (define_insn "atomic_nand_fetch<mode>_hard_1"
2012 [(set (match_operand:QIHI 0 "arith_reg_dest" "=&r")
2013 (not:QIHI
2014 (and:QIHI (mem:QIHI (match_operand:SI 1 "arith_reg_operand" "r"))
2015 (match_operand:QIHI 2 "logical_operand" "rK08"))))
2016 (set (mem:QIHI (match_dup 1))
2017 (unspec:QIHI
2018 [(not:QIHI (and:QIHI (mem:QIHI (match_dup 1)) (match_dup 2)))]
2019 UNSPEC_ATOMIC))
2020 (set (reg:SI T_REG) (const_int 1))
2021 (clobber (reg:SI R0_REG))
2022 (clobber (match_scratch:SI 3 "=&r"))
2023 (clobber (match_scratch:SI 4 "=1"))]
2024 "TARGET_ATOMIC_HARD_LLCS"
2025 {
2026 return "\r mov #-4,%3" "\n"
2027 " and %1,%3" "\n"
2028 " xor %3,%1" "\n"
2029 " add r15,%1" "\n"
2030 " add #-4,%1" "\n"
2031 "0: movli.l @%3,r0" "\n"
2032 " mov.l r0,@-r15" "\n"
2033 " mov.<bw> @%1,r0" "\n"
2034 " and %2,r0" "\n"
2035 " not r0,%0" "\n"
2036 " mov.<bw> %0,@%1" "\n"
2037 " mov.l @r15+,r0" "\n"
2038 " movco.l r0,@%3" "\n"
2039 " bf 0b";
2040 }
2041 [(set_attr "length" "28")])
2043 (define_insn "atomic_nand_fetch<mode>_soft_gusa"
2044 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&u")
2045 (not:QIHISI (and:QIHISI
2046 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=AraAdd")
2047 (match_operand:QIHISI 2 "arith_reg_operand" "u"))))
2048 (set (match_dup 1)
2049 (unspec:QIHISI
2050 [(not:QIHISI (and:QIHISI (match_dup 1) (match_dup 2)))]
2051 UNSPEC_ATOMIC))
2052 (clobber (reg:SI R0_REG))
2053 (clobber (reg:SI R1_REG))]
2054 "TARGET_ATOMIC_SOFT_GUSA"
2055 {
2056 return "\r mova 1f,r0" "\n"
2057 " .align 2" "\n"
2058 " mov r15,r1" "\n"
2059 " mov #(0f-1f),r15" "\n"
2060 "0: mov.<bwl> %1,%0" "\n"
2061 " and %2,%0" "\n"
2062 " not %0,%0" "\n"
2063 " mov.<bwl> %0,%1" "\n"
2064 "1: mov r1,r15";
2065 }
2066 [(set_attr "length" "18")])
2068 (define_insn_and_split "atomic_nand_fetch<mode>_soft_tcb"
2069 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&r")
2070 (not:QIHISI (and:QIHISI
2071 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd")
2072 (match_operand:QIHISI 2 "logical_operand" "rK08"))))
2073 (set (match_dup 1)
2074 (unspec:QIHISI
2075 [(not:QIHISI (and:QIHISI (match_dup 1) (match_dup 2)))]
2076 UNSPEC_ATOMIC))
2077 (clobber (reg:SI R0_REG))
2078 (clobber (reg:SI R1_REG))
2079 (use (match_operand:SI 3 "gbr_displacement"))]
2080 "TARGET_ATOMIC_SOFT_TCB"
2081 {
2082 return "\r mova 1f,r0" "\n"
2083 " mov #(0f-1f),r1" "\n"
2084 " .align 2" "\n"
2085 " mov.l r0,@(%O3,gbr)" "\n"
2086 "0: mov.<bwl> %1,r0" "\n"
2087 " and %2,r0" "\n"
2088 " not r0,r0" "\n"
2089 " mov r0,%0" "\n"
2090 " mov.<bwl> r0,%1" "\n"
2091 "1: mov #0,r0" "\n"
2092 " mov.l r0,@(%O3,gbr)";
2093 }
2094 "&& can_create_pseudo_p () && optimize
2095 && sh_reg_dead_or_unused_after_insn (insn, REGNO (operands[0]))"
2096 [(const_int 0)]
2097 {
2098 emit_insn (gen_atomic_nand<mode>_soft_tcb (operands[1], operands[2],
2099 operands[3]));
2100 }
2101 [(set_attr "length" "22")])
2103 (define_insn "atomic_nand_fetch<mode>_soft_imask"
2104 [(set (match_operand:QIHISI 0 "arith_reg_dest" "=&z")
2105 (not:QIHISI (and:QIHISI
2106 (match_operand:QIHISI 1 "atomic_mem_operand_1" "=SraSdd")
2107 (match_operand:QIHISI 2 "logical_operand" "rK08"))))
2108 (set (match_dup 1)
2109 (unspec:QIHISI
2110 [(not:QIHISI (and:QIHISI (match_dup 1) (match_dup 2)))]
2111 UNSPEC_ATOMIC))
2112 (clobber (match_scratch:SI 3 "=&r"))]
2113 "TARGET_ATOMIC_SOFT_IMASK"
2114 {
2115 return "\r stc sr,%0" "\n"
2116 " mov %0,%3" "\n"
2117 " or #0xF0,%0" "\n"
2118 " ldc %0,sr" "\n"
2119 " mov.<bwl> %1,%0" "\n"
2120 " and %2,%0" "\n"
2121 " not %0,%0" "\n"
2122 " mov.<bwl> %0,%1" "\n"
2123 " ldc %3,sr";
2124 }
2125 [(set_attr "length" "18")])
2127 ;;------------------------------------------------------------------------------
2128 ;; read - test against zero - or with 0x80 - write - return test result
2130 (define_expand "atomic_test_and_set"
2131 [(match_operand:SI 0 "register_operand" "") ;; bool result output
2132 (match_operand:QI 1 "memory_operand" "") ;; memory
2133 (match_operand:SI 2 "const_int_operand" "")] ;; model
2134 "TARGET_ATOMIC_ANY || TARGET_ENABLE_TAS"
2135 {
2136 rtx addr = force_reg (Pmode, XEXP (operands[1], 0));
2138 if (TARGET_ENABLE_TAS)
2139 emit_insn (gen_tasb (addr));
2140 else
2141 {
2142 rtx val = gen_int_mode (targetm.atomic_test_and_set_trueval, QImode);
2143 val = force_reg (QImode, val);
2145 if (TARGET_ATOMIC_HARD_LLCS)
2146 emit_insn (gen_atomic_test_and_set_hard (addr, val));
2147 else if (TARGET_ATOMIC_SOFT_GUSA)
2148 emit_insn (gen_atomic_test_and_set_soft_gusa (addr, val));
2149 else if (TARGET_ATOMIC_SOFT_TCB)
2150 emit_insn (gen_atomic_test_and_set_soft_tcb (addr, val,
2151 TARGET_ATOMIC_SOFT_TCB_GBR_OFFSET_RTX));
2152 else if (TARGET_ATOMIC_SOFT_IMASK)
2153 emit_insn (gen_atomic_test_and_set_soft_imask (addr, val));
2154 else
2155 FAIL;
2156 }
2158 /* The result of the test op is the inverse of what we are
2159 supposed to return. Thus invert the T bit. The inversion will be
2160 potentially optimized away and integrated into surrounding code. */
2161 emit_insn (gen_movnegt (operands[0], get_t_reg_rtx ()));
2162 DONE;
2163 })
2165 (define_insn "tasb"
2166 [(set (reg:SI T_REG)
2167 (eq:SI (mem:QI (match_operand:SI 0 "register_operand" "r"))
2168 (const_int 0)))
2169 (set (mem:QI (match_dup 0))
2170 (unspec:QI [(const_int 128)] UNSPEC_ATOMIC))]
2171 "TARGET_ENABLE_TAS"
2172 "tas.b @%0"
2173 [(set_attr "insn_class" "co_group")])
2175 (define_insn "atomic_test_and_set_soft_gusa"
2176 [(set (reg:SI T_REG)
2177 (eq:SI (mem:QI (match_operand:SI 0 "register_operand" "u"))
2178 (const_int 0)))
2179 (set (mem:QI (match_dup 0))
2180 (unspec:QI [(match_operand:QI 1 "register_operand" "u")] UNSPEC_ATOMIC))
2181 (clobber (match_scratch:QI 2 "=&u"))
2182 (clobber (reg:SI R0_REG))
2183 (clobber (reg:SI R1_REG))]
2184 "TARGET_ATOMIC_SOFT_GUSA && !TARGET_ENABLE_TAS"
2185 {
2186 return "\r mova 1f,r0" "\n"
2187 " .align 2" "\n"
2188 " mov r15,r1" "\n"
2189 " mov #(0f-1f),r15" "\n"
2190 "0: mov.b @%0,%2" "\n"
2191 " mov.b %1,@%0" "\n"
2192 "1: mov r1,r15" "\n"
2193 " tst %2,%2";
2194 }
2195 [(set_attr "length" "16")])
2197 (define_insn "atomic_test_and_set_soft_tcb"
2198 [(set (reg:SI T_REG)
2199 (eq:SI (mem:QI (match_operand:SI 0 "register_operand" "r"))
2200 (const_int 0)))
2201 (set (mem:QI (match_dup 0))
2202 (unspec:QI [(match_operand:QI 1 "register_operand" "r")] UNSPEC_ATOMIC))
2203 (use (match_operand:SI 2 "gbr_displacement"))
2204 (clobber (match_scratch:QI 3 "=&r"))
2205 (clobber (reg:SI R0_REG))
2206 (clobber (reg:SI R1_REG))]
2207 "TARGET_ATOMIC_SOFT_TCB && !TARGET_ENABLE_TAS"
2208 {
2209 return "\r mova 1f,r0" "\n"
2210 " mov #(0f-1f),r1" "\n"
2211 " .align 2" "\n"
2212 " mov.l r0,@(%O2,gbr)" "\n"
2213 "0: mov.b @%0,%3" "\n"
2214 " mov #0,r0" "\n"
2215 " mov.b %1,@%0" "\n"
2216 "1: mov.l r0,@(%O2,gbr)" "\n"
2217 " tst %3,%3";
2218 }
2219 [(set_attr "length" "18")])
2221 (define_insn "atomic_test_and_set_soft_imask"
2222 [(set (reg:SI T_REG)
2223 (eq:SI (mem:QI (match_operand:SI 0 "register_operand" "r"))
2224 (const_int 0)))
2225 (set (mem:QI (match_dup 0))
2226 (unspec:QI [(match_operand:QI 1 "register_operand" "r")] UNSPEC_ATOMIC))
2227 (clobber (match_scratch:SI 2 "=&r"))
2228 (clobber (reg:SI R0_REG))]
2229 "TARGET_ATOMIC_SOFT_IMASK && !TARGET_ENABLE_TAS"
2230 {
2231 return "\r stc sr,r0" "\n"
2232 " mov r0,%2" "\n"
2233 " or #0xF0,r0" "\n"
2234 " ldc r0,sr" "\n"
2235 " mov.b @%0,r0" "\n"
2236 " mov.b %1,@%0" "\n"
2237 " ldc %2,sr" "\n"
2238 " tst r0,r0";
2239 }
2240 [(set_attr "length" "16")])
2242 (define_insn "atomic_test_and_set_hard"
2243 [(set (reg:SI T_REG)
2244 (eq:SI (mem:QI (match_operand:SI 0 "register_operand" "r"))
2245 (const_int 0)))
2246 (set (mem:QI (match_dup 0))
2247 (unspec:QI [(match_operand:QI 1 "register_operand" "r")] UNSPEC_ATOMIC))
2248 (clobber (reg:SI R0_REG))
2249 (clobber (match_scratch:SI 2 "=&r"))
2250 (clobber (match_scratch:SI 3 "=&r"))
2251 (clobber (match_scratch:SI 4 "=0"))]
2252 "TARGET_ATOMIC_HARD_LLCS && !TARGET_ENABLE_TAS"
2253 {
2254 return "\r mov #-4,%2" "\n"
2255 " and %0,%2" "\n"
2256 " xor %2,%0" "\n"
2257 " add r15,%0" "\n"
2258 " add #-4,%0" "\n"
2259 "0: movli.l @%2,r0" "\n"
2260 " mov.l r0,@-r15" "\n"
2261 " mov.b @%0,%3" "\n"
2262 " mov.b %1,@%0" "\n"
2263 " mov.l @r15+,r0" "\n"
2264 " movco.l r0,@%2" "\n"
2265 " bf 0b" "\n"
2266 " tst %3,%3";
2267 }
2268 [(set_attr "length" "26")])