1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2010, Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 3, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. --
18 -- As a special exception under Section 7 of GPL version 3, you are granted --
19 -- additional permissions described in the GCC Runtime Library Exception, --
20 -- version 3.1, as published by the Free Software Foundation. --
22 -- You should have received a copy of the GNU General Public License and --
23 -- a copy of the GCC Runtime Library Exception along with this program; --
24 -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see --
25 -- <http://www.gnu.org/licenses/>. --
27 -- GNAT was originally developed by the GNAT team at New York University. --
28 -- Extensive contributions were provided by Ada Core Technologies Inc. --
30 ------------------------------------------------------------------------------
32 -- This package contains the input routines used for reading the
33 -- input source file. The actual I/O routines are in OS_Interface,
34 -- with this module containing only the system independent processing.
36 -- General Note: throughout the compiler, we use the term line or source
37 -- line to refer to a physical line in the source, terminated by the end of
38 -- physical line sequence.
40 -- There are two distinct concepts of line terminator in GNAT
42 -- A logical line terminator is what corresponds to the "end of a line" as
43 -- described in RM 2.2 (13). Any of the characters FF, LF, CR or VT or any
44 -- wide character that is a Line or Paragraph Separator acts as an end of
45 -- logical line in this sense, and it is essentially irrelevant whether one
46 -- or more appears in sequence (since if sequence of such characters is
47 -- regarded as separate ends of line, then the intervening logical lines
48 -- are null in any case).
50 -- A physical line terminator is a sequence of format effectors that is
51 -- treated as ending a physical line. Physical lines have no Ada semantic
52 -- significance, but they are significant for error reporting purposes,
53 -- since errors are identified by line and column location.
55 -- In GNAT, a physical line is ended by any of the sequences LF, CR/LF, or
56 -- CR. LF is used in typical Unix systems, CR/LF in DOS systems, and CR
57 -- alone in System 7. In addition, we recognize any of these sequences in
58 -- any of the operating systems, for better behavior in treating foreign
59 -- files (e.g. a Unix file with LF terminators transferred to a DOS system).
60 -- Finally, wide character codes in categories Separator, Line and Separator,
61 -- Paragraph are considered to be physical line terminators.
64 with Casing
; use Casing
;
65 with Namet
; use Namet
;
67 with Types
; use Types
;
71 type Type_Of_File
is (
72 -- Indicates type of file being read
75 -- Normal Ada source file
78 -- Configuration pragma file
81 -- Preprocessing definition file
84 -- Source file with preprocessing commands to be preprocessed
86 ----------------------------
87 -- Source License Control --
88 ----------------------------
90 -- The following type indicates the license state of a source if it
95 -- Licensing status of this source unit is unknown
98 -- This is a non-GPL'ed unit that is restricted from depending
99 -- on GPL'ed units (e.g. proprietary code is in this category)
102 -- This file is licensed under the unmodified GPL. It is not allowed
103 -- to depend on Non_GPL units, and Non_GPL units may not depend on
107 -- This file is licensed under the GNAT modified GPL (see header of
108 -- This file for wording of the modification). It may depend on other
109 -- Modified_GPL units or on unrestricted units.
112 -- The license on this file is permitted to depend on any other
113 -- units, or have other units depend on it, without violating the
114 -- license of this unit. Examples are public domain units, and
115 -- units defined in the RM).
117 -- The above license status is checked when the appropriate check is
118 -- activated and one source depends on another, and the licensing state
119 -- of both files is known:
121 -- The prohibited combinations are:
123 -- Restricted file may not depend on GPL file
125 -- GPL file may not depend on Restricted file
127 -- Modified GPL file may not depend on Restricted file
128 -- Modified_GPL file may not depend on GPL file
130 -- The reason for the last restriction here is that a client depending
131 -- on a modified GPL file must be sure that the license condition is
132 -- correct considered transitively.
134 -- The licensing status is determined either by the presence of a
135 -- specific pragma License, or by scanning the header for a predefined
136 -- file, or any file if compiling in -gnatg mode.
138 -----------------------
139 -- Source File Table --
140 -----------------------
142 -- The source file table has an entry for each source file read in for
143 -- this run of the compiler. This table is (default) initialized when
144 -- the compiler is loaded, and simply accumulates entries as compilation
145 -- proceeds and various routines in Sinput and its child packages are
146 -- called to load required source files.
148 -- Virtual entries are also created for generic templates when they are
149 -- instantiated, as described in a separate section later on.
151 -- In the case where there are multiple main units (e.g. in the case of
152 -- the cross-reference tool), this table is not reset between these units,
153 -- so that a given source file is only read once if it is used by two
154 -- separate main units.
156 -- The entries in the table are accessed using a Source_File_Index that
157 -- ranges from 1 to Last_Source_File. Each entry has the following fields
159 -- Note: fields marked read-only are set by Sinput or one of its child
160 -- packages when a source file table entry is created, and cannot be
161 -- subsequently modified, or alternatively are set only by very special
162 -- circumstances, documented in the comments.
164 -- File_Name : File_Name_Type (read-only)
165 -- Name of the source file (simple name with no directory information)
167 -- Full_File_Name : File_Name_Type (read-only)
168 -- Full file name (full name with directory info), used for generation
169 -- of error messages, etc.
171 -- File_Type : Type_Of_File (read-only)
172 -- Indicates type of file (source file, configuration pragmas file,
173 -- preprocessor definition file, preprocessor input file).
175 -- Reference_Name : File_Name_Type (read-only)
176 -- Name to be used for source file references in error messages where
177 -- only the simple name of the file is required. Identical to File_Name
178 -- unless pragma Source_Reference is used to change it. Only processing
179 -- for the Source_Reference pragma circuit may set this field.
181 -- Full_Ref_Name : File_Name_Type (read-only)
182 -- Name to be used for source file references in error messages where
183 -- the full name of the file is required. Identical to Full_File_Name
184 -- unless pragma Source_Reference is used to change it. Only processing
185 -- for the Source_Reference pragma may set this field.
187 -- Debug_Source_Name : File_Name_Type (read-only)
188 -- Name to be used for source file references in debugging information
189 -- where only the simple name of the file is required. Identical to
190 -- Reference_Name unless the -gnatD (debug source file) switch is used.
191 -- Only processing in Sprint that generates this file is permitted to
194 -- Full_Debug_Name : File_Name_Type (read-only)
195 -- Name to be used for source file references in debugging information
196 -- where the full name of the file is required. This is identical to
197 -- Full_Ref_Name unless the -gnatD (debug source file) switch is used.
198 -- Only processing in Sprint that generates this file is permitted to
201 -- License : License_Type;
202 -- License status of source file
204 -- Num_SRef_Pragmas : Nat;
205 -- Number of source reference pragmas present in source file
207 -- First_Mapped_Line : Logical_Line_Number;
208 -- This field stores logical line number of the first line in the
209 -- file that is not a Source_Reference pragma. If no source reference
210 -- pragmas are used, then the value is set to No_Line_Number.
212 -- Source_Text : Source_Buffer_Ptr (read-only)
213 -- Text of source file. Note that every source file has a distinct set
214 -- of non-overlapping logical bounds, so it is possible to determine
215 -- which file is referenced from a given subscript (Source_Ptr) value.
217 -- Source_First : Source_Ptr; (read-only)
218 -- Subscript of first character in Source_Text. Note that this cannot
219 -- be obtained as Source_Text'First, because we use virtual origin
222 -- Source_Last : Source_Ptr; (read-only)
223 -- Subscript of last character in Source_Text. Note that this cannot
224 -- be obtained as Source_Text'Last, because we use virtual origin
225 -- addressing, so this value is always Source_Ptr'Last.
227 -- Time_Stamp : Time_Stamp_Type; (read-only)
228 -- Time stamp of the source file
230 -- Source_Checksum : Word;
231 -- Computed checksum for contents of source file. See separate section
232 -- later on in this spec for a description of the checksum algorithm.
234 -- Last_Source_Line : Physical_Line_Number;
235 -- Physical line number of last source line. While a file is being
236 -- read, this refers to the last line scanned. Once a file has been
237 -- completely scanned, it is the number of the last line in the file,
238 -- and hence also gives the number of source lines in the file.
240 -- Keyword_Casing : Casing_Type;
241 -- Casing style used in file for keyword casing. This is initialized
242 -- to Unknown, and then set from the first occurrence of a keyword.
243 -- This value is used only for formatting of error messages.
245 -- Identifier_Casing : Casing_Type;
246 -- Casing style used in file for identifier casing. This is initialized
247 -- to Unknown, and then set from an identifier in the program as soon as
248 -- one is found whose casing is sufficiently clear to make a decision.
249 -- This value is used for formatting of error messages, and also is used
250 -- in the detection of keywords misused as identifiers.
252 -- Instantiation : Source_Ptr;
253 -- Source file location of the instantiation if this source file entry
254 -- represents a generic instantiation. Set to No_Location for the case
255 -- of a normal non-instantiation entry. See section below for details.
256 -- This field is read-only for clients.
258 -- Inlined_Body : Boolean;
259 -- This can only be set True if Instantiation has a value other than
260 -- No_Location. If true it indicates that the instantiation is actually
261 -- an instance of an inlined body.
263 -- Template : Source_File_Index; (read-only)
264 -- Source file index of the source file containing the template if this
265 -- is a generic instantiation. Set to No_Source_File for the normal case
266 -- of a non-instantiation entry. See Sinput-L for details.
268 -- Unit : Unit_Number_Type;
269 -- Identifies the unit contained in this source file. Set by
270 -- Initialize_Scanner, must not be subsequently altered.
272 -- The source file table is accessed by clients using the following
273 -- subprogram interface:
275 subtype SFI
is Source_File_Index
;
277 System_Source_File_Index
: SFI
;
278 -- The file system.ads is always read by the compiler to determine the
279 -- settings of the target parameters in the private part of System. This
280 -- variable records the source file index of system.ads. Typically this
281 -- will be 1 since system.ads is read first.
283 function Debug_Source_Name
(S
: SFI
) return File_Name_Type
;
284 function File_Name
(S
: SFI
) return File_Name_Type
;
285 function File_Type
(S
: SFI
) return Type_Of_File
;
286 function First_Mapped_Line
(S
: SFI
) return Logical_Line_Number
;
287 function Full_Debug_Name
(S
: SFI
) return File_Name_Type
;
288 function Full_File_Name
(S
: SFI
) return File_Name_Type
;
289 function Full_Ref_Name
(S
: SFI
) return File_Name_Type
;
290 function Identifier_Casing
(S
: SFI
) return Casing_Type
;
291 function Inlined_Body
(S
: SFI
) return Boolean;
292 function Instantiation
(S
: SFI
) return Source_Ptr
;
293 function Keyword_Casing
(S
: SFI
) return Casing_Type
;
294 function Last_Source_Line
(S
: SFI
) return Physical_Line_Number
;
295 function License
(S
: SFI
) return License_Type
;
296 function Num_SRef_Pragmas
(S
: SFI
) return Nat
;
297 function Reference_Name
(S
: SFI
) return File_Name_Type
;
298 function Source_Checksum
(S
: SFI
) return Word
;
299 function Source_First
(S
: SFI
) return Source_Ptr
;
300 function Source_Last
(S
: SFI
) return Source_Ptr
;
301 function Source_Text
(S
: SFI
) return Source_Buffer_Ptr
;
302 function Template
(S
: SFI
) return Source_File_Index
;
303 function Unit
(S
: SFI
) return Unit_Number_Type
;
304 function Time_Stamp
(S
: SFI
) return Time_Stamp_Type
;
306 procedure Set_Keyword_Casing
(S
: SFI
; C
: Casing_Type
);
307 procedure Set_Identifier_Casing
(S
: SFI
; C
: Casing_Type
);
308 procedure Set_License
(S
: SFI
; L
: License_Type
);
309 procedure Set_Unit
(S
: SFI
; U
: Unit_Number_Type
);
311 function Last_Source_File
return Source_File_Index
;
312 -- Index of last source file table entry
314 function Num_Source_Files
return Nat
;
315 -- Number of source file table entries
317 procedure Initialize
;
318 -- Initialize internal tables
321 -- Lock internal tables
324 -- Unlock internal tables
326 Main_Source_File
: Source_File_Index
:= No_Source_File
;
327 -- This is set to the source file index of the main unit
329 -----------------------------
330 -- Source_File_Index_Table --
331 -----------------------------
333 -- The Get_Source_File_Index function is called very frequently. Earlier
334 -- versions cached a single entry, but then reverted to a serial search,
335 -- and this proved to be a significant source of inefficiency. To get
336 -- around this, we use the following directly indexed array. The space
337 -- of possible input values is a value of type Source_Ptr which is simply
338 -- an Int value. The values in this space are allocated sequentially as
339 -- new units are loaded.
341 -- The following table has an entry for each 4K range of possible
342 -- Source_Ptr values. The value in the table is the lowest value
343 -- Source_File_Index whose Source_Ptr range contains value in the
346 -- For example, the entry with index 4 in this table represents Source_Ptr
347 -- values in the range 4*4096 .. 5*4096-1. The Source_File_Index value
348 -- stored would be the lowest numbered source file with at least one byte
351 -- The algorithm used in Get_Source_File_Index is simply to access this
352 -- table and then do a serial search starting at the given position. This
353 -- will almost always terminate with one or two checks.
355 -- Note that this array is pretty large, but in most operating systems
356 -- it will not be allocated in physical memory unless it is actually used.
358 Chunk_Power
: constant := 12;
359 Chunk_Size
: constant := 2 ** Chunk_Power
;
360 -- Change comments above if value changed. Note that Chunk_Size must
361 -- be a power of 2 (to allow for efficient access to the table).
363 Source_File_Index_Table
:
364 array (Int
range 0 .. Int
'Last / Chunk_Size
) of Source_File_Index
;
366 procedure Set_Source_File_Index_Table
(Xnew
: Source_File_Index
);
367 -- Sets entries in the Source_File_Index_Table for the newly created
368 -- Source_File table entry whose index is Xnew. The Source_First and
369 -- Source_Last fields of this entry must be set before the call.
371 -----------------------
372 -- Checksum Handling --
373 -----------------------
375 -- As a source file is scanned, a checksum is computed by taking all the
376 -- non-blank characters in the file, excluding comment characters, the
377 -- minus-minus sequence starting a comment, and all control characters
380 -- The checksum algorithm used is the standard CRC-32 algorithm, as
381 -- implemented by System.CRC32, except that we do not bother with the
382 -- final XOR with all 1 bits.
384 -- This algorithm ensures that the checksum includes all semantically
385 -- significant aspects of the program represented by the source file,
386 -- but is insensitive to layout, presence or contents of comments, wide
387 -- character representation method, or casing conventions outside strings.
389 -- Scans.Checksum is initialized appropriately at the start of scanning
390 -- a file, and copied into the Source_Checksum field of the file table
391 -- entry when the end of file is encountered.
393 -------------------------------------
394 -- Handling Generic Instantiations --
395 -------------------------------------
397 -- As described in Sem_Ch12, a generic instantiation involves making a
398 -- copy of the tree of the generic template. The source locations in
399 -- this tree directly reference the source of the template. However it
400 -- is also possible to find the location of the instantiation.
402 -- This is achieved as follows. When an instantiation occurs, a new entry
403 -- is made in the source file table. This entry points to the same source
404 -- text, i.e. the file that contains the instantiation, but has a distinct
405 -- set of Source_Ptr index values. The separate range of Sloc values avoids
406 -- confusion, and means that the Sloc values can still be used to uniquely
407 -- identify the source file table entry. It is possible for both entries
408 -- to point to the same text, because of the virtual origin pointers used
409 -- in the source table.
411 -- The Instantiation field of this source file index entry, usually set
412 -- to No_Source_File, instead contains the Sloc of the instantiation. In
413 -- the case of nested instantiations, this Sloc may itself refer to an
414 -- instantiation, so the complete chain can be traced.
416 -- Two routines are used to build these special entries in the source
417 -- file table. Create_Instantiation_Source is first called to build
418 -- the virtual source table entry for the instantiation, and then the
419 -- Sloc values in the copy are adjusted using Adjust_Instantiation_Sloc.
420 -- See child unit Sinput.L for details on these two routines.
426 Current_Source_File
: Source_File_Index
:= No_Source_File
;
427 -- Source_File table index of source file currently being scanned.
428 -- Initialized so that some tools (such as gprbuild) can be built with
429 -- -gnatVa and pragma Initialized_Scalars without problems.
431 Current_Source_Unit
: Unit_Number_Type
;
432 -- Unit number of source file currently being scanned. The special value
433 -- of No_Unit indicates that the configuration pragma file is currently
434 -- being scanned (this has no entry in the unit table).
436 Source_gnat_adc
: Source_File_Index
:= No_Source_File
;
437 -- This is set if a gnat.adc file is present to reference this file
439 Source
: Source_Buffer_Ptr
;
440 -- Current source (copy of Source_File.Table (Current_Source_Unit).Source)
442 Internal_Source
: aliased Source_Buffer
(1 .. 81);
443 -- This buffer is used internally in the compiler when the lexical analyzer
444 -- is used to scan a string from within the compiler. The procedure is to
445 -- establish Internal_Source_Ptr as the value of Source, set the string to
446 -- be scanned, appropriately terminated, in this buffer, and set Scan_Ptr
447 -- to point to the start of the buffer. It is a fatal error if the scanner
448 -- signals an error while scanning a token in this internal buffer.
450 Internal_Source_Ptr
: constant Source_Buffer_Ptr
:=
451 Internal_Source
'Unrestricted_Access;
452 -- Pointer to internal source buffer
458 procedure Backup_Line
(P
: in out Source_Ptr
);
459 -- Back up the argument pointer to the start of the previous line. On
460 -- entry, P points to the start of a physical line in the source buffer.
461 -- On return, P is updated to point to the start of the previous line.
462 -- The caller has checked that a Line_Terminator character precedes P so
463 -- that there definitely is a previous line in the source buffer.
465 procedure Build_Location_String
(Loc
: Source_Ptr
);
466 -- This function builds a string literal of the form "name:line", where
467 -- name is the file name corresponding to Loc, and line is the line number.
468 -- In the event that instantiations are involved, additional suffixes of
469 -- the same form are appended after the separating string " instantiated at
470 -- ". The returned string is appended to the Name_Buffer, terminated by
471 -- ASCII.NUL, with Name_Length indicating the length not including the
474 function Build_Location_String
(Loc
: Source_Ptr
) return String;
475 -- Functional form returning a string, which does not include a terminating
476 -- null character. The contents of Name_Buffer is destroyed.
478 function Get_Column_Number
(P
: Source_Ptr
) return Column_Number
;
479 -- The ones-origin column number of the specified Source_Ptr value is
480 -- determined and returned. Tab characters if present are assumed to
481 -- represent the standard 1,9,17.. spacing pattern.
483 function Get_Logical_Line_Number
484 (P
: Source_Ptr
) return Logical_Line_Number
;
485 -- The line number of the specified source position is obtained by
486 -- doing a binary search on the source positions in the lines table
487 -- for the unit containing the given source position. The returned
488 -- value is the logical line number, already adjusted for the effect
489 -- of source reference pragmas. If P refers to the line of a source
490 -- reference pragma itself, then No_Line is returned. If no source
491 -- reference pragmas have been encountered, the value returned is
492 -- the same as the physical line number.
494 function Get_Logical_Line_Number_Img
495 (P
: Source_Ptr
) return String;
496 -- Same as above function, but returns the line number as a string of
497 -- decimal digits, with no leading space. Destroys Name_Buffer.
499 function Get_Physical_Line_Number
500 (P
: Source_Ptr
) return Physical_Line_Number
;
501 -- The line number of the specified source position is obtained by
502 -- doing a binary search on the source positions in the lines table
503 -- for the unit containing the given source position. The returned
504 -- value is the physical line number in the source being compiled.
506 function Get_Source_File_Index
(S
: Source_Ptr
) return Source_File_Index
;
507 -- Return file table index of file identified by given source pointer
508 -- value. This call must always succeed, since any valid source pointer
509 -- value belongs to some previously loaded source file.
511 function Instantiation_Depth
(S
: Source_Ptr
) return Nat
;
512 -- Determine instantiation depth for given Sloc value. A value of
513 -- zero means that the given Sloc is not in an instantiation.
515 function Line_Start
(P
: Source_Ptr
) return Source_Ptr
;
516 -- Finds the source position of the start of the line containing the
517 -- given source location.
520 (L
: Physical_Line_Number
;
521 S
: Source_File_Index
) return Source_Ptr
;
522 -- Finds the source position of the start of the given line in the
523 -- given source file, using a physical line number to identify the line.
525 function Num_Source_Lines
(S
: Source_File_Index
) return Nat
;
526 -- Returns the number of source lines (this is equivalent to reading
527 -- the value of Last_Source_Line, but returns Nat rather than a
528 -- physical line number.
530 procedure Register_Source_Ref_Pragma
531 (File_Name
: File_Name_Type
;
532 Stripped_File_Name
: File_Name_Type
;
534 Line_After_Pragma
: Physical_Line_Number
);
535 -- Register a source reference pragma, the parameter File_Name is the
536 -- file name from the pragma, and Stripped_File_Name is this name with
537 -- the directory information stripped. Both these parameters are set
538 -- to No_Name if no file name parameter was given in the pragma.
539 -- (which can only happen for the second and subsequent pragmas).
540 -- Mapped_Line is the line number parameter from the pragma, and
541 -- Line_After_Pragma is the physical line number of the line that
542 -- follows the line containing the Source_Reference pragma.
544 function Original_Location
(S
: Source_Ptr
) return Source_Ptr
;
545 -- Given a source pointer S, returns the corresponding source pointer
546 -- value ignoring instantiation copies. For locations that do not
547 -- correspond to instantiation copies of templates, the argument is
548 -- returned unchanged. For locations that do correspond to copies of
549 -- templates from instantiations, the location within the original
550 -- template is returned. This is useful in canonicalizing locations.
552 function Instantiation_Location
(S
: Source_Ptr
) return Source_Ptr
;
553 pragma Inline
(Instantiation_Location
);
554 -- Given a source pointer S, returns the corresponding source pointer
555 -- value of the instantiation if this location is within an instance.
556 -- If S is not within an instance, then this returns No_Location.
558 function Top_Level_Location
(S
: Source_Ptr
) return Source_Ptr
;
559 -- Given a source pointer S, returns the argument unchanged if it is
560 -- not in an instantiation. If S is in an instantiation, then it returns
561 -- the location of the top level instantiation, i.e. the outer level
562 -- instantiation in the nested case.
564 function Physical_To_Logical
565 (Line
: Physical_Line_Number
;
566 S
: Source_File_Index
) return Logical_Line_Number
;
567 -- Given a physical line number in source file whose source index is S,
568 -- return the corresponding logical line number. If the physical line
569 -- number is one containing a Source_Reference pragma, the result will
570 -- be No_Line_Number.
572 procedure Skip_Line_Terminators
573 (P
: in out Source_Ptr
;
574 Physical
: out Boolean);
575 -- On entry, P points to a line terminator that has been encountered,
576 -- which is one of FF,LF,VT,CR or a wide character sequence whose value is
577 -- in category Separator,Line or Separator,Paragraph. P points just past
578 -- the character that was scanned. The purpose of this routine is to
579 -- distinguish physical and logical line endings. A physical line ending
582 -- CR on its own (MAC System 7)
583 -- LF on its own (Unix and unix-like systems)
584 -- CR/LF (DOS, Windows)
585 -- Wide character in Separator,Line or Separator,Paragraph category
587 -- Note: we no longer recognize LF/CR (which we did in some earlier
588 -- versions of GNAT. The reason for this is that this sequence is not
589 -- used and recognizing it generated confusion. For example given the
590 -- sequence LF/CR/LF we were interpreting that as (LF/CR) ending the
591 -- first line and a blank line ending with CR following, but it is
592 -- clearly better to interpret this as LF, with a blank line terminated
593 -- by CR/LF, given that LF and CR/LF are both in common use, but no
594 -- system we know of uses LF/CR.
596 -- A logical line ending (that is not a physical line ending) is one of:
601 -- On return, P is bumped past the line ending sequence (one of the above
602 -- seven possibilities). Physical is set to True to indicate that a
603 -- physical end of line was encountered, in which case this routine also
604 -- makes sure that the lines table for the current source file has an
605 -- appropriate entry for the start of the new physical line.
607 procedure Sloc_Range
(N
: Node_Id
; Min
, Max
: out Source_Ptr
);
608 -- Given a node, returns the minimum and maximum source locations of any
609 -- node in the syntactic subtree for the node. This is not quite the same
610 -- as the locations of the first and last token in the node construct
611 -- because parentheses at the outer level do not have a recorded Sloc.
613 -- Note: if the tree for the expression contains no "real" Sloc values,
614 -- i.e. values > No_Location, then both Min and Max are set to Sloc (Expr).
616 function Source_Offset
(S
: Source_Ptr
) return Nat
;
617 -- Returns the zero-origin offset of the given source location from the
618 -- start of its corresponding unit. This is used for creating canonical
619 -- names in some situations.
621 procedure Write_Location
(P
: Source_Ptr
);
622 -- Writes out a string of the form fff:nn:cc, where fff, nn, cc are the
623 -- file name, line number and column corresponding to the given source
624 -- location. No_Location and Standard_Location appear as the strings
625 -- <no location> and <standard location>. If the location is within an
626 -- instantiation, then the instance location is appended, enclosed in
627 -- square brackets (which can nest if necessary). Note that this routine
628 -- is used only for internal compiler debugging output purposes (which
629 -- is why the somewhat cryptic use of brackets is acceptable).
631 procedure wl
(P
: Source_Ptr
);
632 pragma Export
(Ada
, wl
);
633 -- Equivalent to Write_Location (P); Write_Eol; for calls from GDB
635 procedure Write_Time_Stamp
(S
: Source_File_Index
);
636 -- Writes time stamp of specified file in YY-MM-DD HH:MM.SS format
639 -- Initializes internal tables from current tree file using the relevant
640 -- Table.Tree_Read routines.
642 procedure Tree_Write
;
643 -- Writes out internal tables to current tree file using the relevant
644 -- Table.Tree_Write routines.
647 pragma Inline
(File_Name
);
648 pragma Inline
(First_Mapped_Line
);
649 pragma Inline
(Full_File_Name
);
650 pragma Inline
(Identifier_Casing
);
651 pragma Inline
(Instantiation
);
652 pragma Inline
(Keyword_Casing
);
653 pragma Inline
(Last_Source_Line
);
654 pragma Inline
(Last_Source_File
);
655 pragma Inline
(License
);
656 pragma Inline
(Num_SRef_Pragmas
);
657 pragma Inline
(Num_Source_Files
);
658 pragma Inline
(Num_Source_Lines
);
659 pragma Inline
(Reference_Name
);
660 pragma Inline
(Set_Keyword_Casing
);
661 pragma Inline
(Set_Identifier_Casing
);
662 pragma Inline
(Source_First
);
663 pragma Inline
(Source_Last
);
664 pragma Inline
(Source_Text
);
665 pragma Inline
(Template
);
666 pragma Inline
(Time_Stamp
);
668 -------------------------
669 -- Source_Lines Tables --
670 -------------------------
672 type Lines_Table_Type
is
673 array (Physical_Line_Number
) of Source_Ptr
;
674 -- Type used for lines table. The entries are indexed by physical line
675 -- numbers. The values are the starting Source_Ptr values for the start
676 -- of the corresponding physical line. Note that we make this a bogus
677 -- big array, sized as required, so that we avoid the use of fat pointers.
679 type Lines_Table_Ptr
is access all Lines_Table_Type
;
680 -- Type used for pointers to line tables
682 type Logical_Lines_Table_Type
is
683 array (Physical_Line_Number
) of Logical_Line_Number
;
684 -- Type used for logical lines table. This table is used if a source
685 -- reference pragma is present. It is indexed by physical line numbers,
686 -- and contains the corresponding logical line numbers. An entry that
687 -- corresponds to a source reference pragma is set to No_Line_Number.
688 -- Note that we make this a bogus big array, sized as required, so that
689 -- we avoid the use of fat pointers.
691 type Logical_Lines_Table_Ptr
is access all Logical_Lines_Table_Type
;
692 -- Type used for pointers to logical line tables
694 -----------------------
695 -- Source_File Table --
696 -----------------------
698 -- See earlier descriptions for meanings of public fields
700 type Source_File_Record
is record
701 File_Name
: File_Name_Type
;
702 Reference_Name
: File_Name_Type
;
703 Debug_Source_Name
: File_Name_Type
;
704 Full_Debug_Name
: File_Name_Type
;
705 Full_File_Name
: File_Name_Type
;
706 Full_Ref_Name
: File_Name_Type
;
707 Num_SRef_Pragmas
: Nat
;
708 First_Mapped_Line
: Logical_Line_Number
;
709 Source_Text
: Source_Buffer_Ptr
;
710 Source_First
: Source_Ptr
;
711 Source_Last
: Source_Ptr
;
712 Source_Checksum
: Word
;
713 Last_Source_Line
: Physical_Line_Number
;
714 Instantiation
: Source_Ptr
;
715 Template
: Source_File_Index
;
716 Unit
: Unit_Number_Type
;
717 Time_Stamp
: Time_Stamp_Type
;
718 File_Type
: Type_Of_File
;
719 Inlined_Body
: Boolean;
720 License
: License_Type
;
721 Keyword_Casing
: Casing_Type
;
722 Identifier_Casing
: Casing_Type
;
724 -- The following fields are for internal use only (i.e. only in the
725 -- body of Sinput or its children, with no direct access by clients).
727 Sloc_Adjust
: Source_Ptr
;
728 -- A value to be added to Sloc values for this file to reference the
729 -- corresponding lines table. This is zero for the non-instantiation
730 -- case, and set so that the addition references the ultimate template
731 -- for the instantiation case. See Sinput-L for further details.
733 Lines_Table
: Lines_Table_Ptr
;
734 -- Pointer to lines table for this source. Updated as additional
735 -- lines are accessed using the Skip_Line_Terminators procedure.
736 -- Note: the lines table for an instantiation entry refers to the
737 -- original line numbers of the template see Sinput-L for details.
739 Logical_Lines_Table
: Logical_Lines_Table_Ptr
;
740 -- Pointer to logical lines table for this source. Non-null only if
741 -- a source reference pragma has been processed. Updated as lines
742 -- are accessed using the Skip_Line_Terminators procedure.
744 Lines_Table_Max
: Physical_Line_Number
;
745 -- Maximum subscript values for currently allocated Lines_Table
746 -- and (if present) the allocated Logical_Lines_Table. The value
747 -- Max_Source_Line gives the maximum used value, this gives the
748 -- maximum allocated value.
752 -- The following representation clause ensures that the above record
753 -- has no holes. We do this so that when instances of this record are
754 -- written by Tree_Gen, we do not write uninitialized values to the file.
756 AS
: constant Pos
:= Standard
'Address_Size;
758 for Source_File_Record
use record
759 File_Name
at 0 range 0 .. 31;
760 Reference_Name
at 4 range 0 .. 31;
761 Debug_Source_Name
at 8 range 0 .. 31;
762 Full_Debug_Name
at 12 range 0 .. 31;
763 Full_File_Name
at 16 range 0 .. 31;
764 Full_Ref_Name
at 20 range 0 .. 31;
765 Num_SRef_Pragmas
at 24 range 0 .. 31;
766 First_Mapped_Line
at 28 range 0 .. 31;
767 Source_First
at 32 range 0 .. 31;
768 Source_Last
at 36 range 0 .. 31;
769 Source_Checksum
at 40 range 0 .. 31;
770 Last_Source_Line
at 44 range 0 .. 31;
771 Instantiation
at 48 range 0 .. 31;
772 Template
at 52 range 0 .. 31;
773 Unit
at 56 range 0 .. 31;
774 Time_Stamp
at 60 range 0 .. 8 * Time_Stamp_Length
- 1;
775 File_Type
at 74 range 0 .. 7;
776 Inlined_Body
at 75 range 0 .. 7;
777 License
at 76 range 0 .. 7;
778 Keyword_Casing
at 77 range 0 .. 7;
779 Identifier_Casing
at 78 range 0 .. 15;
780 Sloc_Adjust
at 80 range 0 .. 31;
781 Lines_Table_Max
at 84 range 0 .. 31;
783 -- The following fields are pointers, so we have to specialize their
784 -- lengths using pointer size, obtained above as Standard'Address_Size.
786 Source_Text
at 88 range 0 .. AS
- 1;
787 Lines_Table
at 88 range AS
.. AS
* 2 - 1;
788 Logical_Lines_Table
at 88 range AS
* 2 .. AS
* 3 - 1;
791 for Source_File_Record
'Size use 88 * 8 + AS
* 3;
792 -- This ensures that we did not leave out any fields
794 package Source_File
is new Table
.Table
(
795 Table_Component_Type
=> Source_File_Record
,
796 Table_Index_Type
=> Source_File_Index
,
797 Table_Low_Bound
=> 1,
798 Table_Initial
=> Alloc
.Source_File_Initial
,
799 Table_Increment
=> Alloc
.Source_File_Increment
,
800 Table_Name
=> "Source_File");
806 procedure Alloc_Line_Tables
807 (S
: in out Source_File_Record
;
809 -- Allocate or reallocate the lines table for the given source file so
810 -- that it can accommodate at least New_Max lines. Also allocates or
811 -- reallocates logical lines table if source ref pragmas are present.
813 procedure Add_Line_Tables_Entry
814 (S
: in out Source_File_Record
;
816 -- Increment line table size by one (reallocating the lines table if
817 -- needed) and set the new entry to contain the value P. Also bumps
818 -- the Source_Line_Count field. If source reference pragmas are
819 -- present, also increments logical lines table size by one, and
822 procedure Trim_Lines_Table
(S
: Source_File_Index
);
823 -- Set lines table size for entry S in the source file table to
824 -- correspond to the current value of Num_Source_Lines, releasing
825 -- any unused storage. This is used by Sinput.L and Sinput.D.