Use hard_regno_nregs instead of HARD_REGNO_NREGS
[official-gcc.git] / gcc / config / avr / avr-arch.h
blob891f73cb1b13267ec56bc2d75d212b7cc7e8107b
1 /* Definitions of types that are used to store AVR architecture and
2 device information.
3 Copyright (C) 2012-2017 Free Software Foundation, Inc.
4 Contributed by Georg-Johann Lay (avr@gjlay.de)
6 This file is part of GCC.
8 GCC is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 3, or (at your option)
11 any later version.
13 GCC is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with GCC; see the file COPYING3. If not see
20 <http://www.gnu.org/licenses/>. */
22 #ifndef AVR_ARCH_H
23 #define AVR_ARCH_H
25 #define AVR_MMCU_DEFAULT "avr2"
27 /* This enum supplies indices into the avr_arch_types[] table below. */
29 enum avr_arch_id
31 ARCH_UNKNOWN,
32 ARCH_AVR1,
33 ARCH_AVR2,
34 ARCH_AVR25,
35 ARCH_AVR3,
36 ARCH_AVR31,
37 ARCH_AVR35,
38 ARCH_AVR4,
39 ARCH_AVR5,
40 ARCH_AVR51,
41 ARCH_AVR6,
42 ARCH_AVRTINY,
43 ARCH_AVRXMEGA2,
44 ARCH_AVRXMEGA3,
45 ARCH_AVRXMEGA4,
46 ARCH_AVRXMEGA5,
47 ARCH_AVRXMEGA6,
48 ARCH_AVRXMEGA7
52 /* Architecture-specific properties. */
54 typedef struct
56 /* Assembler only. */
57 int asm_only;
59 /* Core have 'MUL*' instructions. */
60 int have_mul;
62 /* Core have 'CALL' and 'JMP' instructions. */
63 int have_jmp_call;
65 /* Core have 'MOVW' and 'LPM Rx,Z' instructions. */
66 int have_movw_lpmx;
68 /* Core have 'ELPM' instructions. */
69 int have_elpm;
71 /* Core have 'ELPM Rx,Z' instructions. */
72 int have_elpmx;
74 /* Core have 'EICALL' and 'EIJMP' instructions. */
75 int have_eijmp_eicall;
77 /* This is an XMEGA core. */
78 int xmega_p;
80 /* This core has the RAMPD special function register
81 and thus also the RAMPX, RAMPY and RAMPZ registers. */
82 int have_rampd;
84 /* This is a TINY core. */
85 int tiny_p;
87 /* Default start of data section address for architecture. */
88 int default_data_section_start;
90 /* Offset where flash memory is seen in RAM address range or 0. */
91 int flash_pm_offset;
93 /* Offset between SFR address and RAM address:
94 SFR-address = RAM-address - sfr_offset */
95 int sfr_offset;
97 /* Architecture id to built-in define __AVR_ARCH__ (NULL -> no macro) */
98 const char *const macro;
100 /* Architecture name. */
101 const char *const name;
102 } avr_arch_t;
105 /* Device-specific properties. */
107 typedef struct
109 /* Device name. */
110 const char *const name;
112 /* Index in avr_arch_types[]. */
113 enum avr_arch_id arch_id;
115 /* device specific feature */
116 int dev_attribute;
118 /* Must lie outside user's namespace. NULL == no macro. */
119 const char *const macro;
121 /* Start of data section. */
122 int data_section_start;
124 /* Start of text section. */
125 int text_section_start;
127 /* Flash size in bytes. */
128 int flash_size;
129 } avr_mcu_t;
131 /* AVR device specific features.
133 AVR_ISA_RMW
134 Only few avr devices have Read-Modify-Write (RMW) instructions
135 (XCH, LAC, LAS and LAT)
137 AVR_SHORT_SP
138 Stack Pointer has only 8 bit width.
139 The device / multilib has an 8-bit stack pointer (no SPH).
141 AVR_ERRATA_SKIP
142 Some AVR devices have a core erratum when skipping a 2-word instruction.
143 Skip instructions are: SBRC, SBRS, SBIC, SBIS, CPSE.
144 Problems will occur with return address is IRQ executes during the
145 skip sequence.
147 A support ticket from Atmel returned the following information:
149 Subject: (ATTicket:644469) On AVR skip-bug core Erratum
150 From: avr@atmel.com Date: 2011-07-27
151 (Please keep the subject when replying to this mail)
153 This errata exists only in AT90S8515 and ATmega103 devices.
155 For information please refer the following respective errata links
156 http://www.atmel.com/dyn/resources/prod_documents/doc2494.pdf
157 http://www.atmel.com/dyn/resources/prod_documents/doc1436.pdf
159 AVR_ISA_RCALL
160 Always use RJMP / RCALL and assume JMP / CALL are not available.
161 This affects multilib selection via specs generation and -mshort-calls.
162 Even if a device like ATtiny417 from avrxmega3 supports JMP / CALL, we
163 assume these instructions are not available and we set the built-in
164 macro __AVR_HAVE_JMP_CALL__ accordingly. This macro is used to
165 determine a rough estimate of flash size in libgcc, and AVR-LibC uses
166 this macro to determine vector sizes. */
168 enum avr_device_specific_features
170 AVR_ISA_NONE,
171 AVR_ISA_RMW = 0x1, /* device has RMW instructions. */
172 AVR_SHORT_SP = 0x2, /* Stack Pointer has 8 bits width. */
173 AVR_ERRATA_SKIP = 0x4, /* device has a core erratum. */
174 AVR_ISA_LDS = 0x8, /* whether LDS / STS is valid for all data in static
175 storage. Only useful for reduced Tiny. */
176 AVR_ISA_RCALL = 0x10 /* Use RJMP / RCALL even though JMP / CALL
177 are available (-mshort-calls). */
180 /* Map architecture to its texinfo string. */
182 typedef struct
184 /* Architecture ID. */
185 enum avr_arch_id arch_id;
187 /* textinfo source to describe the architecture. */
188 const char *texinfo;
189 } avr_arch_info_t;
191 /* Preprocessor macros to define depending on MCU type. */
193 extern const avr_arch_t avr_arch_types[];
194 extern const avr_arch_t *avr_arch;
196 extern const avr_mcu_t avr_mcu_types[];
198 extern void avr_inform_core_architectures (void);
200 #endif /* AVR_ARCH_H */