libitm/Makefile.in

   1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
   6 # Foundation, Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18
  19 VPATH = @srcdir@
  20 am__make_dryrun = \
  21   { \
  22     am__dry=no; \
  23     case $$MAKEFLAGS in \
  24       *\\[\ \   ]*) \
  25         echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
  26           | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
  27       *) \
  28         for am__flg in $$MAKEFLAGS; do \
  29           case $$am__flg in \
  30             *=*|--*) ;; \
  31             *n*) am__dry=yes; break;; \
  32           esac; \
  33         done;; \
  34     esac; \
  35     test $$am__dry = yes; \
  36   }
  37 pkgdatadir = $(datadir)/@PACKAGE@
  38 pkgincludedir = $(includedir)/@PACKAGE@
  39 pkglibdir = $(libdir)/@PACKAGE@
  40 pkglibexecdir = $(libexecdir)/@PACKAGE@
  41 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  42 install_sh_DATA = $(install_sh) -c -m 644
  43 install_sh_PROGRAM = $(install_sh) -c
  44 install_sh_SCRIPT = $(install_sh) -c
  45 INSTALL_HEADER = $(INSTALL_DATA)
  46 transform = $(program_transform_name)
  47 NORMAL_INSTALL = :
  48 PRE_INSTALL = :
  49 POST_INSTALL = :
  50 NORMAL_UNINSTALL = :
  51 PRE_UNINSTALL = :
  52 POST_UNINSTALL = :
  53 build_triplet = @build@
  54 host_triplet = @host@
  55 target_triplet = @target@
  56 @ARCH_ARM_TRUE@am__append_1 = hwcap.cc
  57 @ARCH_X86_TRUE@am__append_2 = x86_sse.cc x86_avx.cc
  58 @ARCH_FUTEX_TRUE@am__append_3 = futex.cc
  59 subdir = .
  60 DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  61         $(top_srcdir)/configure $(am__configure_deps) \
  62         $(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
  63         $(srcdir)/libitm.spec.in $(srcdir)/../depcomp
  64 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  65 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
  66         $(top_srcdir)/../config/asmcfi.m4 \
  67         $(top_srcdir)/../config/depstand.m4 \
  68         $(top_srcdir)/../config/enable.m4 \
  69         $(top_srcdir)/../config/futex.m4 \
  70         $(top_srcdir)/../config/lead-dot.m4 \
  71         $(top_srcdir)/../config/mmap.m4 \
  72         $(top_srcdir)/../config/multi.m4 \
  73         $(top_srcdir)/../config/override.m4 \
  74         $(top_srcdir)/../config/stdint.m4 \
  75         $(top_srcdir)/../config/tls.m4 \
  76         $(top_srcdir)/../config/weakref.m4 \
  77         $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
  78         $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
  79         $(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \
  80         $(top_srcdir)/configure.ac
  81 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  82         $(ACLOCAL_M4)
  83 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  84  configure.lineno config.status.lineno
  85 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
  86 CONFIG_HEADER = config.h
  87 CONFIG_CLEAN_FILES = libitm.spec
  88 CONFIG_CLEAN_VPATH_FILES =
  89 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  90 am__vpath_adj = case $$p in \
  91     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  92     *) f=$$p;; \
  93   esac;
  94 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  95 am__install_max = 40
  96 am__nobase_strip_setup = \
  97   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  98 am__nobase_strip = \
  99   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 100 am__nobase_list = $(am__nobase_strip_setup); \
 101   for p in $$list; do echo "$$p $$p"; done | \
 102   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 103   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 104     if (++n[$$2] == $(am__install_max)) \
 105       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 106     END { for (dir in files) print dir, files[dir] }'
 107 am__base_list = \
 108   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 109   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 110 am__uninstall_files_from_dir = { \
 111   test -z "$$files" \
 112     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 113     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 114          $(am__cd) "$$dir" && rm -f $$files; }; \
 115   }
 116 am__installdirs = "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" \
 117         "$(DESTDIR)$(toolexeclibdir)"
 118 LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
 119 libitm_la_LIBADD =
 120 @ARCH_ARM_TRUE@am__objects_1 = hwcap.lo
 121 @ARCH_X86_TRUE@am__objects_2 = x86_sse.lo x86_avx.lo
 122 @ARCH_FUTEX_TRUE@am__objects_3 = futex.lo
 123 am_libitm_la_OBJECTS = aatree.lo alloc.lo alloc_c.lo alloc_cpp.lo \
 124         barrier.lo beginend.lo clone.lo eh_cpp.lo local.lo query.lo \
 125         retry.lo rwlock.lo useraction.lo util.lo sjlj.lo tls.lo \
 126         method-serial.lo method-gl.lo method-ml.lo $(am__objects_1) \
 127         $(am__objects_2) $(am__objects_3)
 128 libitm_la_OBJECTS = $(am_libitm_la_OBJECTS)
 129 DEFAULT_INCLUDES = -I.@am__isrc@
 130 depcomp = $(SHELL) $(top_srcdir)/../depcomp
 131 am__depfiles_maybe = depfiles
 132 am__mv = mv -f
 133 CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 134         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
 135 LTCPPASCOMPILE = $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 136         --mode=compile $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 137         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
 138 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 139         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 140 LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 141         --mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 142         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 143 CXXLD = $(CXX)
 144 CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 145         --mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
 146         $(LDFLAGS) -o $@
 147 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 148         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 149 LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 150         --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 151         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 152 CCLD = $(CC)
 153 LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
 154         --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
 155         $(LDFLAGS) -o $@
 156 SOURCES = $(libitm_la_SOURCES)
 157 MULTISRCTOP =
 158 MULTIBUILDTOP =
 159 MULTIDIRS =
 160 MULTISUBDIR =
 161 MULTIDO = true
 162 MULTICLEAN = true
 163 INFO_DEPS = libitm.info
 164 am__TEXINFO_TEX_DIR = $(srcdir)/../gcc/doc/include
 165 DVIS = libitm.dvi
 166 PDFS = libitm.pdf
 167 PSS = libitm.ps
 168 HTMLS = libitm.html
 169 TEXINFOS = libitm.texi
 170 TEXI2DVI = texi2dvi
 171 TEXI2PDF = $(TEXI2DVI) --pdf --batch
 172 MAKEINFOHTML = $(MAKEINFO) --html
 173 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
 174 DVIPS = dvips
 175 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 176         html-recursive info-recursive install-data-recursive \
 177         install-dvi-recursive install-exec-recursive \
 178         install-html-recursive install-info-recursive \
 179         install-pdf-recursive install-ps-recursive install-recursive \
 180         installcheck-recursive installdirs-recursive pdf-recursive \
 181         ps-recursive uninstall-recursive
 182 am__can_run_installinfo = \
 183   case $$AM_UPDATE_INFO_DIR in \
 184     n|no|NO) false;; \
 185     *) (install-info --version) >/dev/null 2>&1;; \
 186   esac
 187 HEADERS = $(nodist_toolexeclib_HEADERS)
 188 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 189   distclean-recursive maintainer-clean-recursive
 190 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 191         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
 192 ETAGS = etags
 193 CTAGS = ctags
 194 DIST_SUBDIRS = $(SUBDIRS)
 195 ACLOCAL = @ACLOCAL@
 196 AMTAR = @AMTAR@
 197 AR = @AR@
 198 AUTOCONF = @AUTOCONF@
 199 AUTOHEADER = @AUTOHEADER@
 200 AUTOMAKE = @AUTOMAKE@
 201 AWK = @AWK@
 202 CC = @CC@
 203 CCAS = @CCAS@
 204 CCASDEPMODE = @CCASDEPMODE@
 205 CCASFLAGS = @CCASFLAGS@
 206 CCDEPMODE = @CCDEPMODE@
 207 CFLAGS = @CFLAGS@
 208 CPP = @CPP@
 209 CPPFLAGS = @CPPFLAGS@
 210 CXX = @CXX@
 211 CXXCPP = @CXXCPP@
 212 CXXDEPMODE = @CXXDEPMODE@
 213 CXXFLAGS = @CXXFLAGS@
 214 CYGPATH_W = @CYGPATH_W@
 215 DEFS = @DEFS@
 216 DEPDIR = @DEPDIR@
 217 DSYMUTIL = @DSYMUTIL@
 218 DUMPBIN = @DUMPBIN@
 219 ECHO_C = @ECHO_C@
 220 ECHO_N = @ECHO_N@
 221 ECHO_T = @ECHO_T@
 222 EGREP = @EGREP@
 223 EXEEXT = @EXEEXT@
 224 FGREP = @FGREP@
 225 GREP = @GREP@
 226 HWCAP_LDFLAGS = @HWCAP_LDFLAGS@
 227 INSTALL = @INSTALL@
 228 INSTALL_DATA = @INSTALL_DATA@
 229 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 230 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 231 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 232 LD = @LD@
 233 LDFLAGS = @LDFLAGS@
 234 LIBOBJS = @LIBOBJS@
 235 LIBS = @LIBS@
 236 LIBTOOL = @LIBTOOL@
 237 LIPO = @LIPO@
 238 LN_S = @LN_S@
 239 LTLIBOBJS = @LTLIBOBJS@
 240 MAINT = @MAINT@
 241 MAKEINFO = @MAKEINFO@
 242 MKDIR_P = @MKDIR_P@
 243 NM = @NM@
 244 NMEDIT = @NMEDIT@
 245 OBJDUMP = @OBJDUMP@
 246 OBJEXT = @OBJEXT@
 247 OPT_LDFLAGS = @OPT_LDFLAGS@
 248 OTOOL = @OTOOL@
 249 OTOOL64 = @OTOOL64@
 250 PACKAGE = @PACKAGE@
 251 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 252 PACKAGE_NAME = @PACKAGE_NAME@
 253 PACKAGE_STRING = @PACKAGE_STRING@
 254 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 255 PACKAGE_URL = @PACKAGE_URL@
 256 PACKAGE_VERSION = @PACKAGE_VERSION@
 257 PATH_SEPARATOR = @PATH_SEPARATOR@
 258 PERL = @PERL@
 259 RANLIB = @RANLIB@
 260 SECTION_LDFLAGS = @SECTION_LDFLAGS@
 261 SED = @SED@
 262 SET_MAKE = @SET_MAKE@
 263 SHELL = @SHELL@
 264 STRIP = @STRIP@
 265 VERSION = @VERSION@
 266 XCFLAGS = @XCFLAGS@
 267 XLDFLAGS = @XLDFLAGS@
 268 abs_builddir = @abs_builddir@
 269 abs_srcdir = @abs_srcdir@
 270 abs_top_builddir = @abs_top_builddir@
 271 abs_top_srcdir = @abs_top_srcdir@
 272 ac_ct_CC = @ac_ct_CC@
 273 ac_ct_CXX = @ac_ct_CXX@
 274 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 275 am__include = @am__include@
 276 am__leading_dot = @am__leading_dot@
 277 am__quote = @am__quote@
 278 am__tar = @am__tar@
 279 am__untar = @am__untar@
 280 bindir = @bindir@
 281 build = @build@
 282 build_alias = @build_alias@
 283 build_cpu = @build_cpu@
 284 build_os = @build_os@
 285 build_vendor = @build_vendor@
 286 builddir = @builddir@
 287 config_path = @config_path@
 288 datadir = @datadir@
 289 datarootdir = @datarootdir@
 290 docdir = @docdir@
 291 dvidir = @dvidir@
 292 enable_shared = @enable_shared@
 293 enable_static = @enable_static@
 294 exec_prefix = @exec_prefix@
 295 host = @host@
 296 host_alias = @host_alias@
 297 host_cpu = @host_cpu@
 298 host_os = @host_os@
 299 host_vendor = @host_vendor@
 300 htmldir = @htmldir@
 301 includedir = @includedir@
 302 infodir = @infodir@
 303 install_sh = @install_sh@
 304 libdir = @libdir@
 305 libexecdir = @libexecdir@
 306 libtool_VERSION = @libtool_VERSION@
 307 link_itm = @link_itm@
 308 localedir = @localedir@
 309 localstatedir = @localstatedir@
 310 mandir = @mandir@
 311 mkdir_p = @mkdir_p@
 312 multi_basedir = @multi_basedir@
 313 oldincludedir = @oldincludedir@
 314 pdfdir = @pdfdir@
 315 prefix = @prefix@
 316 program_transform_name = @program_transform_name@
 317 psdir = @psdir@
 318 sbindir = @sbindir@
 319 sharedstatedir = @sharedstatedir@
 320 srcdir = @srcdir@
 321 sysconfdir = @sysconfdir@
 322 target = @target@
 323 target_alias = @target_alias@
 324 target_cpu = @target_cpu@
 325 target_os = @target_os@
 326 target_vendor = @target_vendor@
 327 toolexecdir = @toolexecdir@
 328 toolexeclibdir = @toolexeclibdir@
 329 top_build_prefix = @top_build_prefix@
 330 top_builddir = @top_builddir@
 331 top_srcdir = @top_srcdir@
 332 ACLOCAL_AMFLAGS = -I .. -I ../config
 333 SUBDIRS = testsuite
 334 gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
 335 abi_version = -fabi-version=4
 336 search_path = $(addprefix $(top_srcdir)/config/, $(config_path)) $(top_srcdir)
 337 fincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/finclude
 338 libsubincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include
 339 AM_CPPFLAGS = $(addprefix -I, $(search_path))
 340 AM_CFLAGS = $(XCFLAGS)
 341 AM_CXXFLAGS = $(XCFLAGS) -std=gnu++0x -funwind-tables -fno-exceptions \
 342         -fno-rtti $(abi_version)
 343
 344 AM_CCASFLAGS = $(XCFLAGS)
 345 AM_LDFLAGS = $(XLDFLAGS) $(SECTION_LDFLAGS) $(OPT_LDFLAGS) $(HWCAP_LDFLAGS)
 346 toolexeclib_LTLIBRARIES = libitm.la
 347 nodist_toolexeclib_HEADERS = libitm.spec
 348 @LIBITM_BUILD_VERSIONED_SHLIB_FALSE@libitm_version_script =
 349 @LIBITM_BUILD_VERSIONED_SHLIB_GNU_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_script = -Wl,--version-script,$(top_srcdir)/libitm.map
 350 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_script = -Wl,-M,libitm.map-sun
 351 @LIBITM_BUILD_VERSIONED_SHLIB_FALSE@libitm_version_dep =
 352 @LIBITM_BUILD_VERSIONED_SHLIB_GNU_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_dep = $(top_srcdir)/libitm.map
 353 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm_version_dep = libitm.map-sun
 354 libitm_version_info = -version-info $(libtool_VERSION)
 355
 356 # Force link with C, not C++.  For now, while we're using C++ we don't
 357 # want or need libstdc++.
 358 libitm_la_DEPENDENCIES = $(libitm_version_dep)
 359 libitm_la_LINK = $(LINK) $(libitm_la_LDFLAGS)
 360 libitm_la_LDFLAGS = $(libitm_version_info) $(libitm_version_script)
 361 libitm_la_SOURCES = aatree.cc alloc.cc alloc_c.cc alloc_cpp.cc \
 362         barrier.cc beginend.cc clone.cc eh_cpp.cc local.cc query.cc \
 363         retry.cc rwlock.cc useraction.cc util.cc sjlj.S tls.cc \
 364         method-serial.cc method-gl.cc method-ml.cc $(am__append_1) \
 365         $(am__append_2) $(am__append_3)
 366
 367 # Automake Documentation:
 368 # If your package has Texinfo files in many directories, you can use the
 369 # variable TEXINFO_TEX to tell Automake where to find the canonical
 370 # `texinfo.tex' for your package. The value of this variable should be
 371 # the relative path from the current `Makefile.am' to `texinfo.tex'.
 372 TEXINFO_TEX = ../gcc/doc/include/texinfo.tex
 373
 374 # Defines info, dvi, pdf and html targets
 375 MAKEINFOFLAGS = -I $(srcdir)/../gcc/doc/include
 376 info_TEXINFOS = libitm.texi
 377 @GENINSRC_FALSE@STAMP_GENINSRC =
 378
 379 # AM_CONDITIONAL on configure option --generated-files-in-srcdir
 380 @GENINSRC_TRUE@STAMP_GENINSRC = stamp-geninsrc
 381 @BUILD_INFO_FALSE@STAMP_BUILD_INFO =
 382
 383 # AM_CONDITIONAL on configure check ACX_CHECK_PROG_VER([MAKEINFO])
 384 @BUILD_INFO_TRUE@STAMP_BUILD_INFO = stamp-build-info
 385 CLEANFILES = $(STAMP_GENINSRC) $(STAMP_BUILD_INFO) libitm.info
 386 MAINTAINERCLEANFILES = $(srcdir)/libitm.info
 387 all: config.h
 388         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 389
 390 .SUFFIXES:
 391 .SUFFIXES: .S .cc .dvi .lo .o .obj .ps
 392 am--refresh: Makefile
 393         @:
 394 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 395         @for dep in $?; do \
 396           case '$(am__configure_deps)' in \
 397             *$$dep*) \
 398               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 399               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 400                 && exit 0; \
 401               exit 1;; \
 402           esac; \
 403         done; \
 404         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 405         $(am__cd) $(top_srcdir) && \
 406           $(AUTOMAKE) --foreign Makefile
 407 .PRECIOUS: Makefile
 408 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 409         @case '$?' in \
 410           *config.status*) \
 411             echo ' $(SHELL) ./config.status'; \
 412             $(SHELL) ./config.status;; \
 413           *) \
 414             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 415             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 416         esac;
 417
 418 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 419         $(SHELL) ./config.status --recheck
 420
 421 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 422         $(am__cd) $(srcdir) && $(AUTOCONF)
 423 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 424         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 425 $(am__aclocal_m4_deps):
 426
 427 config.h: stamp-h1
 428         @if test ! -f $@; then rm -f stamp-h1; else :; fi
 429         @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 430
 431 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 432         @rm -f stamp-h1
 433         cd $(top_builddir) && $(SHELL) ./config.status config.h
 434 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 435         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 436         rm -f stamp-h1
 437         touch $@
 438
 439 distclean-hdr:
 440         -rm -f config.h stamp-h1
 441 libitm.spec: $(top_builddir)/config.status $(srcdir)/libitm.spec.in
 442         cd $(top_builddir) && $(SHELL) ./config.status $@
 443 install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
 444         @$(NORMAL_INSTALL)
 445         @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 446         list2=; for p in $$list; do \
 447           if test -f $$p; then \
 448             list2="$$list2 $$p"; \
 449           else :; fi; \
 450         done; \
 451         test -z "$$list2" || { \
 452           echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
 453           $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
 454           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
 455           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
 456         }
 457
 458 uninstall-toolexeclibLTLIBRARIES:
 459         @$(NORMAL_UNINSTALL)
 460         @list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
 461         for p in $$list; do \
 462           $(am__strip_dir) \
 463           echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
 464           $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
 465         done
 466
 467 clean-toolexeclibLTLIBRARIES:
 468         -test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
 469         @list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
 470           dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
 471           test "$$dir" != "$$p" || dir=.; \
 472           echo "rm -f \"$${dir}/so_locations\""; \
 473           rm -f "$${dir}/so_locations"; \
 474         done
 475 libitm.la: $(libitm_la_OBJECTS) $(libitm_la_DEPENDENCIES) $(EXTRA_libitm_la_DEPENDENCIES)
 476         $(libitm_la_LINK) -rpath $(toolexeclibdir) $(libitm_la_OBJECTS) $(libitm_la_LIBADD) $(LIBS)
 477
 478 mostlyclean-compile:
 479         -rm -f *.$(OBJEXT)
 480
 481 distclean-compile:
 482         -rm -f *.tab.c
 483
 484 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aatree.Plo@am__quote@
 485 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc.Plo@am__quote@
 486 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc_c.Plo@am__quote@
 487 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alloc_cpp.Plo@am__quote@
 488 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/barrier.Plo@am__quote@
 489 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/beginend.Plo@am__quote@
 490 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/clone.Plo@am__quote@
 491 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eh_cpp.Plo@am__quote@
 492 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/futex.Plo@am__quote@
 493 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hwcap.Plo@am__quote@
 494 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/local.Plo@am__quote@
 495 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-gl.Plo@am__quote@
 496 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-ml.Plo@am__quote@
 497 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/method-serial.Plo@am__quote@
 498 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/query.Plo@am__quote@
 499 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/retry.Plo@am__quote@
 500 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rwlock.Plo@am__quote@
 501 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sjlj.Plo@am__quote@
 502 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tls.Plo@am__quote@
 503 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/useraction.Plo@am__quote@
 504 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/util.Plo@am__quote@
 505 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_avx.Plo@am__quote@
 506 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_sse.Plo@am__quote@
 507
 508 .S.o:
 509 @am__fastdepCCAS_TRUE@  $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 510 @am__fastdepCCAS_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 511 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 512 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 513 @am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ $<
 514
 515 .S.obj:
 516 @am__fastdepCCAS_TRUE@  $(CPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 517 @am__fastdepCCAS_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 518 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 519 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 520 @am__fastdepCCAS_FALSE@ $(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 521
 522 .S.lo:
 523 @am__fastdepCCAS_TRUE@  $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 524 @am__fastdepCCAS_TRUE@  $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 525 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 526 @AMDEP_TRUE@@am__fastdepCCAS_FALSE@     DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 527 @am__fastdepCCAS_FALSE@ $(LTCPPASCOMPILE) -c -o $@ $<
 528
 529 .cc.o:
 530 @am__fastdepCXX_TRUE@   $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 531 @am__fastdepCXX_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 532 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 533 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 534 @am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ $<
 535
 536 .cc.obj:
 537 @am__fastdepCXX_TRUE@   $(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 538 @am__fastdepCXX_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 539 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 540 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 541 @am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 542
 543 .cc.lo:
 544 @am__fastdepCXX_TRUE@   $(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
 545 @am__fastdepCXX_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
 546 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
 547 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 548 @am__fastdepCXX_FALSE@  $(LTCXXCOMPILE) -c -o $@ $<
 549
 550 mostlyclean-libtool:
 551         -rm -f *.lo
 552
 553 clean-libtool:
 554         -rm -rf .libs _libs
 555
 556 distclean-libtool:
 557         -rm -f libtool config.lt
 558
 559 # GNU Make needs to see an explicit $(MAKE) variable in the command it
 560 # runs to enable its job server during parallel builds.  Hence the
 561 # comments below.
 562 all-multi:
 563         $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 564 install-multi:
 565         $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 566
 567 mostlyclean-multi:
 568         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
 569 clean-multi:
 570         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
 571 distclean-multi:
 572         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
 573 maintainer-clean-multi:
 574         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
 575
 576 libitm.dvi: libitm.texi
 577         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 578         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 579         $(TEXI2DVI) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi
 580
 581 libitm.pdf: libitm.texi
 582         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 583         MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
 584         $(TEXI2PDF) -o $@ `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi
 585
 586 libitm.html: libitm.texi
 587         rm -rf $(@:.html=.htp)
 588         if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
 589          -o $(@:.html=.htp) `test -f 'libitm.texi' || echo '$(srcdir)/'`libitm.texi; \
 590         then \
 591           rm -rf $@; \
 592           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 593             mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
 594         else \
 595           if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
 596             rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 597           exit 1; \
 598         fi
 599 .dvi.ps:
 600         TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 601         $(DVIPS) -o $@ $<
 602
 603 uninstall-dvi-am:
 604         @$(NORMAL_UNINSTALL)
 605         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 606         for p in $$list; do \
 607           $(am__strip_dir) \
 608           echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
 609           rm -f "$(DESTDIR)$(dvidir)/$$f"; \
 610         done
 611
 612 uninstall-html-am:
 613         @$(NORMAL_UNINSTALL)
 614         @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
 615         for p in $$list; do \
 616           $(am__strip_dir) \
 617           echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
 618           rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
 619         done
 620
 621 uninstall-info-am:
 622         @$(PRE_UNINSTALL)
 623         @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
 624           list='$(INFO_DEPS)'; \
 625           for file in $$list; do \
 626             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 627             echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
 628             if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
 629             then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
 630           done; \
 631         else :; fi
 632         @$(NORMAL_UNINSTALL)
 633         @list='$(INFO_DEPS)'; \
 634         for file in $$list; do \
 635           relfile=`echo "$$file" | sed 's|^.*/||'`; \
 636           relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
 637           (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
 638              echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
 639              rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
 640            else :; fi); \
 641         done
 642
 643 uninstall-pdf-am:
 644         @$(NORMAL_UNINSTALL)
 645         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
 646         for p in $$list; do \
 647           $(am__strip_dir) \
 648           echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
 649           rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
 650         done
 651
 652 uninstall-ps-am:
 653         @$(NORMAL_UNINSTALL)
 654         @list='$(PSS)'; test -n "$(psdir)" || list=; \
 655         for p in $$list; do \
 656           $(am__strip_dir) \
 657           echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
 658           rm -f "$(DESTDIR)$(psdir)/$$f"; \
 659         done
 660
 661 dist-info: $(INFO_DEPS)
 662         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 663         list='$(INFO_DEPS)'; \
 664         for base in $$list; do \
 665           case $$base in \
 666             $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
 667           esac; \
 668           if test -f $$base; then d=.; else d=$(srcdir); fi; \
 669           base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
 670           for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
 671             if test -f $$file; then \
 672               relfile=`expr "$$file" : "$$d/\(.*\)"`; \
 673               test -f "$(distdir)/$$relfile" || \
 674                 cp -p $$file "$(distdir)/$$relfile"; \
 675             else :; fi; \
 676           done; \
 677         done
 678
 679 mostlyclean-aminfo:
 680         -rm -rf libitm.aux libitm.cp libitm.cps libitm.fn libitm.fns libitm.ky \
 681           libitm.kys libitm.log libitm.pg libitm.pgs libitm.tmp \
 682           libitm.toc libitm.tp libitm.tps libitm.vr libitm.vrs
 683
 684 clean-aminfo:
 685         -test -z "libitm.dvi libitm.pdf libitm.ps libitm.html" \
 686         || rm -rf libitm.dvi libitm.pdf libitm.ps libitm.html
 687
 688 maintainer-clean-aminfo:
 689         @list='$(INFO_DEPS)'; for i in $$list; do \
 690           i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
 691           echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 692           rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 693         done
 694 install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS)
 695         @$(NORMAL_INSTALL)
 696         @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
 697         if test -n "$$list"; then \
 698           echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
 699           $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
 700         fi; \
 701         for p in $$list; do \
 702           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 703           echo "$$d$$p"; \
 704         done | $(am__base_list) | \
 705         while read files; do \
 706           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \
 707           $(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \
 708         done
 709
 710 uninstall-nodist_toolexeclibHEADERS:
 711         @$(NORMAL_UNINSTALL)
 712         @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
 713         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 714         dir='$(DESTDIR)$(toolexeclibdir)'; $(am__uninstall_files_from_dir)
 715
 716 # This directory's subdirectories are mostly independent; you can cd
 717 # into them and run `make' without going through this Makefile.
 718 # To change the values of `make' variables: instead of editing Makefiles,
 719 # (1) if the variable is set in `config.status', edit `config.status'
 720 #     (which will cause the Makefiles to be regenerated when you run `make');
 721 # (2) otherwise, pass the desired values on the `make' command line.
 722 $(RECURSIVE_TARGETS):
 723         @fail= failcom='exit 1'; \
 724         for f in x $$MAKEFLAGS; do \
 725           case $$f in \
 726             *=* | --[!k]*);; \
 727             *k*) failcom='fail=yes';; \
 728           esac; \
 729         done; \
 730         dot_seen=no; \
 731         target=`echo $@ | sed s/-recursive//`; \
 732         list='$(SUBDIRS)'; for subdir in $$list; do \
 733           echo "Making $$target in $$subdir"; \
 734           if test "$$subdir" = "."; then \
 735             dot_seen=yes; \
 736             local_target="$$target-am"; \
 737           else \
 738             local_target="$$target"; \
 739           fi; \
 740           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 741           || eval $$failcom; \
 742         done; \
 743         if test "$$dot_seen" = "no"; then \
 744           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 745         fi; test -z "$$fail"
 746
 747 $(RECURSIVE_CLEAN_TARGETS):
 748         @fail= failcom='exit 1'; \
 749         for f in x $$MAKEFLAGS; do \
 750           case $$f in \
 751             *=* | --[!k]*);; \
 752             *k*) failcom='fail=yes';; \
 753           esac; \
 754         done; \
 755         dot_seen=no; \
 756         case "$@" in \
 757           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 758           *) list='$(SUBDIRS)' ;; \
 759         esac; \
 760         rev=''; for subdir in $$list; do \
 761           if test "$$subdir" = "."; then :; else \
 762             rev="$$subdir $$rev"; \
 763           fi; \
 764         done; \
 765         rev="$$rev ."; \
 766         target=`echo $@ | sed s/-recursive//`; \
 767         for subdir in $$rev; do \
 768           echo "Making $$target in $$subdir"; \
 769           if test "$$subdir" = "."; then \
 770             local_target="$$target-am"; \
 771           else \
 772             local_target="$$target"; \
 773           fi; \
 774           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 775           || eval $$failcom; \
 776         done && test -z "$$fail"
 777 tags-recursive:
 778         list='$(SUBDIRS)'; for subdir in $$list; do \
 779           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 780         done
 781 ctags-recursive:
 782         list='$(SUBDIRS)'; for subdir in $$list; do \
 783           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 784         done
 785
 786 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 787         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 788         unique=`for i in $$list; do \
 789             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 790           done | \
 791           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 792               END { if (nonempty) { for (i in files) print i; }; }'`; \
 793         mkid -fID $$unique
 794 tags: TAGS
 795
 796 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 797                 $(TAGS_FILES) $(LISP)
 798         set x; \
 799         here=`pwd`; \
 800         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 801           include_option=--etags-include; \
 802           empty_fix=.; \
 803         else \
 804           include_option=--include; \
 805           empty_fix=; \
 806         fi; \
 807         list='$(SUBDIRS)'; for subdir in $$list; do \
 808           if test "$$subdir" = .; then :; else \
 809             test ! -f $$subdir/TAGS || \
 810               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 811           fi; \
 812         done; \
 813         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 814         unique=`for i in $$list; do \
 815             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 816           done | \
 817           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 818               END { if (nonempty) { for (i in files) print i; }; }'`; \
 819         shift; \
 820         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 821           test -n "$$unique" || unique=$$empty_fix; \
 822           if test $$# -gt 0; then \
 823             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 824               "$$@" $$unique; \
 825           else \
 826             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 827               $$unique; \
 828           fi; \
 829         fi
 830 ctags: CTAGS
 831 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 832                 $(TAGS_FILES) $(LISP)
 833         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 834         unique=`for i in $$list; do \
 835             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 836           done | \
 837           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 838               END { if (nonempty) { for (i in files) print i; }; }'`; \
 839         test -z "$(CTAGS_ARGS)$$unique" \
 840           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 841              $$unique
 842
 843 GTAGS:
 844         here=`$(am__cd) $(top_builddir) && pwd` \
 845           && $(am__cd) $(top_srcdir) \
 846           && gtags -i $(GTAGS_ARGS) "$$here"
 847
 848 distclean-tags:
 849         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 850 check-am: all-am
 851 check: check-recursive
 852 all-am: Makefile $(INFO_DEPS) $(LTLIBRARIES) all-multi $(HEADERS) \
 853                 config.h all-local
 854 installdirs: installdirs-recursive
 855 installdirs-am:
 856         for dir in "$(DESTDIR)$(toolexeclibdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(toolexeclibdir)"; do \
 857           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 858         done
 859 install: install-recursive
 860 install-exec: install-exec-recursive
 861 install-data: install-data-recursive
 862 uninstall: uninstall-recursive
 863
 864 install-am: all-am
 865         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 866
 867 installcheck: installcheck-recursive
 868 install-strip:
 869         if test -z '$(STRIP)'; then \
 870           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 871             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 872               install; \
 873         else \
 874           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 875             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 876             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 877         fi
 878 mostlyclean-generic:
 879
 880 clean-generic:
 881         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 882
 883 distclean-generic:
 884         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 885         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 886
 887 maintainer-clean-generic:
 888         @echo "This command is intended for maintainers to use"
 889         @echo "it deletes files that may require special tools to rebuild."
 890         -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 891 clean: clean-multi clean-recursive
 892
 893 clean-am: clean-aminfo clean-generic clean-libtool \
 894         clean-toolexeclibLTLIBRARIES mostlyclean-am
 895
 896 distclean: distclean-multi distclean-recursive
 897         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 898         -rm -rf ./$(DEPDIR)
 899         -rm -f Makefile
 900 distclean-am: clean-am distclean-compile distclean-generic \
 901         distclean-hdr distclean-libtool distclean-tags
 902
 903 dvi: dvi-recursive
 904
 905 dvi-am: $(DVIS)
 906
 907 html: html-recursive
 908
 909 html-am: $(HTMLS)
 910
 911 info: info-recursive
 912
 913 info-am: $(INFO_DEPS)
 914
 915 install-data-am: install-info-am
 916
 917 install-dvi: install-dvi-recursive
 918
 919 install-dvi-am: $(DVIS)
 920         @$(NORMAL_INSTALL)
 921         @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
 922         if test -n "$$list"; then \
 923           echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
 924           $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
 925         fi; \
 926         for p in $$list; do \
 927           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 928           echo "$$d$$p"; \
 929         done | $(am__base_list) | \
 930         while read files; do \
 931           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
 932           $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
 933         done
 934 install-exec-am: install-multi install-nodist_toolexeclibHEADERS \
 935         install-toolexeclibLTLIBRARIES
 936
 937 install-html: install-html-recursive
 938
 939 install-html-am: $(HTMLS)
 940         @$(NORMAL_INSTALL)
 941         @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
 942         if test -n "$$list"; then \
 943           echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
 944           $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
 945         fi; \
 946         for p in $$list; do \
 947           if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
 948           $(am__strip_dir) \
 949           d2=$$d$$p; \
 950           if test -d "$$d2"; then \
 951             echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
 952             $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 953             echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 954             $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
 955           else \
 956             list2="$$list2 $$d2"; \
 957           fi; \
 958         done; \
 959         test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
 960         while read files; do \
 961           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
 962           $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
 963         done; }
 964 install-info: install-info-recursive
 965
 966 install-info-am: $(INFO_DEPS)
 967         @$(NORMAL_INSTALL)
 968         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 969         list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 970         if test -n "$$list"; then \
 971           echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
 972           $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
 973         fi; \
 974         for file in $$list; do \
 975           case $$file in \
 976             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 977           esac; \
 978           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 979           file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
 980           for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
 981                        $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
 982             if test -f $$ifile; then \
 983               echo "$$ifile"; \
 984             else : ; fi; \
 985           done; \
 986         done | $(am__base_list) | \
 987         while read files; do \
 988           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
 989           $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
 990         @$(POST_INSTALL)
 991         @if $(am__can_run_installinfo); then \
 992           list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
 993           for file in $$list; do \
 994             relfile=`echo "$$file" | sed 's|^.*/||'`; \
 995             echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
 996             install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
 997           done; \
 998         else : ; fi
 999 install-man:
1000
1001 install-pdf: install-pdf-recursive
1002
1003 install-pdf-am: $(PDFS)
1004         @$(NORMAL_INSTALL)
1005         @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
1006         if test -n "$$list"; then \
1007           echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
1008           $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
1009         fi; \
1010         for p in $$list; do \
1011           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
1012           echo "$$d$$p"; \
1013         done | $(am__base_list) | \
1014         while read files; do \
1015           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
1016           $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
1017 install-ps: install-ps-recursive
1018
1019 install-ps-am: $(PSS)
1020         @$(NORMAL_INSTALL)
1021         @list='$(PSS)'; test -n "$(psdir)" || list=; \
1022         if test -n "$$list"; then \
1023           echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
1024           $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
1025         fi; \
1026         for p in $$list; do \
1027           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
1028           echo "$$d$$p"; \
1029         done | $(am__base_list) | \
1030         while read files; do \
1031           echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
1032           $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
1033 installcheck-am:
1034
1035 maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
1036         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
1037         -rm -rf $(top_srcdir)/autom4te.cache
1038         -rm -rf ./$(DEPDIR)
1039         -rm -f Makefile
1040 maintainer-clean-am: distclean-am maintainer-clean-aminfo \
1041         maintainer-clean-generic
1042
1043 mostlyclean: mostlyclean-multi mostlyclean-recursive
1044
1045 mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
1046         mostlyclean-generic mostlyclean-libtool
1047
1048 pdf: pdf-recursive
1049
1050 pdf-am: $(PDFS)
1051
1052 ps: ps-recursive
1053
1054 ps-am: $(PSS)
1055
1056 uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
1057         uninstall-nodist_toolexeclibHEADERS uninstall-pdf-am \
1058         uninstall-ps-am uninstall-toolexeclibLTLIBRARIES
1059
1060 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \
1061         clean-multi ctags-recursive distclean-multi install-am \
1062         install-multi install-strip maintainer-clean-multi \
1063         mostlyclean-multi tags-recursive
1064
1065 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
1066         all all-am all-local all-multi am--refresh check check-am \
1067         clean clean-aminfo clean-generic clean-libtool clean-multi \
1068         clean-toolexeclibLTLIBRARIES ctags ctags-recursive dist-info \
1069         distclean distclean-compile distclean-generic distclean-hdr \
1070         distclean-libtool distclean-multi distclean-tags dvi dvi-am \
1071         html html-am info info-am install install-am install-data \
1072         install-data-am install-dvi install-dvi-am install-exec \
1073         install-exec-am install-html install-html-am install-info \
1074         install-info-am install-man install-multi \
1075         install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \
1076         install-ps install-ps-am install-strip \
1077         install-toolexeclibLTLIBRARIES installcheck installcheck-am \
1078         installdirs installdirs-am maintainer-clean \
1079         maintainer-clean-aminfo maintainer-clean-generic \
1080         maintainer-clean-multi mostlyclean mostlyclean-aminfo \
1081         mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
1082         mostlyclean-multi pdf pdf-am ps ps-am tags tags-recursive \
1083         uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
1084         uninstall-info-am uninstall-nodist_toolexeclibHEADERS \
1085         uninstall-pdf-am uninstall-ps-am \
1086         uninstall-toolexeclibLTLIBRARIES
1087
1088
1089 vpath % $(strip $(search_path))
1090 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@libitm.map-sun : $(top_srcdir)/libitm.map \
1091 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@              $(top_srcdir)/../contrib/make_sunver.pl \
1092 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@              $(libitm_la_OBJECTS) $(libitm_la_LIBADD)
1093 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@      perl $(top_srcdir)/../contrib/make_sunver.pl \
1094 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@        $(top_srcdir)/libitm.map \
1095 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@        $(libitm_la_OBJECTS:%.lo=.libs/%.o) \
1096 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@       `echo $(libitm_la_LIBADD) | \
1097 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@          sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
1098 @LIBITM_BUILD_VERSIONED_SHLIB_SUN_TRUE@@LIBITM_BUILD_VERSIONED_SHLIB_TRUE@       > $@ || (rm -f $@ ; exit 1)
1099 # Make sure -msse is appended at the end.
1100 @ARCH_X86_TRUE@x86_sse.lo : override CXXFLAGS += -msse
1101 # Make sure -mavx is appended at the end.
1102 @ARCH_X86_AVX_TRUE@x86_avx.lo : override CXXFLAGS += -mavx
1103
1104 all-local: $(STAMP_GENINSRC)
1105
1106 stamp-geninsrc: libitm.info
1107         cp -p $(top_builddir)/libitm.info $(srcdir)/libitm.info
1108         @touch $@
1109
1110 libitm.info: $(STAMP_BUILD_INFO)
1111
1112 stamp-build-info: libitm.texi
1113         $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) -o libitm.info $(srcdir)/libitm.texi
1114         @touch $@
1115
1116 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1117 # Otherwise a system limit (for SysV at least) may be exceeded.
1118 .NOEXPORT: