1 /* This file contains the definitions and documentation for the
2 Register Transfer
Expressions (rtx
's) that make up the
3 Register Transfer Language (rtl) used in the Back End of the GNU compiler.
4 Copyright (C) 1987, 88, 92, 94, 95, 97, 98, 1999, 2000
5 Free Software Foundation, Inc.
7 This file is part of GNU CC.
9 GNU CC is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 2, or (at your option)
14 GNU CC is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with GNU CC; see the file COPYING. If not, write to
21 the Free Software Foundation, 59 Temple Place - Suite 330,
22 Boston, MA 02111-1307, USA. */
25 /* Expression definitions and descriptions for all targets are in this file.
26 Some will not be used for some targets.
28 The fields in the cpp macro call "DEF_RTL_EXPR()"
29 are used to create declarations in the C source of the compiler.
33 1. The internal name of the rtx used in the C source.
34 It is a tag in the enumeration "enum rtx_code" defined in "rtl.h".
35 By convention these are in UPPER_CASE.
37 2. The name of the rtx in the external ASCII format read by
38 read_rtx(), and printed by print_rtx().
39 These names are stored in rtx_name[].
40 By convention these are the internal (field 1) names in lower_case.
42 3. The print format, and type of each rtx->fld[] (field) in this rtx.
43 These formats are stored in rtx_format[].
44 The meaning of the formats is documented in front of this array in rtl.c
46 4. The class of the rtx. These are stored in rtx_class and are accessed
47 via the GET_RTX_CLASS macro. They are defined as follows:
49 "o" an rtx code that can be used to represent an object (e.g, REG, MEM)
50 "<" an rtx code for a comparison (e.g, EQ, NE, LT)
51 "1" an rtx code for a unary arithmetic expression (e.g, NEG, NOT)
52 "c" an rtx code for a commutative binary operation (e.g,, PLUS, MULT)
53 "3" an rtx code for a non-bitfield three input operation (IF_THEN_ELSE)
54 "2" an rtx code for a non-commutative binary operation (e.g., MINUS, DIV)
55 "b" an rtx code for a bit-field operation (ZERO_EXTRACT, SIGN_EXTRACT)
56 "i" an rtx code for a machine insn (INSN, JUMP_INSN, CALL_INSN)
57 "m" an rtx code for something that matches in insns (e.g, MATCH_DUP)
58 "g" an rtx code for grouping insns together (e.g, GROUP_PARALLEL)
63 /* ---------------------------------------------------------------------
64 Expressions (and "meta" expressions) used for structuring the
65 rtl representation of a program.
66 --------------------------------------------------------------------- */
68 /* an expression code name unknown to the reader */
69 DEF_RTL_EXPR(UNKNOWN, "UnKnown", "*", 'x
')
71 /* (NIL) is used by rtl reader and printer to represent a null pointer. */
73 DEF_RTL_EXPR(NIL, "nil", "*", 'x
')
75 /* ---------------------------------------------------------------------
76 Expressions used in constructing lists.
77 --------------------------------------------------------------------- */
79 /* a linked list of expressions */
80 DEF_RTL_EXPR(EXPR_LIST, "expr_list", "ee", 'x
')
82 /* a linked list of instructions.
83 The insns are represented in print by their uids. */
84 DEF_RTL_EXPR(INSN_LIST, "insn_list", "ue", 'x
')
86 /* ----------------------------------------------------------------------
87 Expression types for machine descriptions.
88 These do not appear in actual rtl code in the compiler.
89 ---------------------------------------------------------------------- */
91 /* Appears only in machine descriptions.
92 Means use the function named by the second arg (the string)
93 as a predicate; if matched, store the structure that was matched
94 in the operand table at index specified by the first arg (the integer).
95 If the second arg is the null string, the structure is just stored.
97 A third string argument indicates to the register allocator restrictions
98 on where the operand can be allocated.
100 If the target needs no restriction on any instruction this field should
103 The string is prepended by:
104 '=' to indicate the operand is only written to.
105 '+' to indicate the operand is both read and written to.
107 Each character in the string represents an allocable class for an operand.
108 'g
' indicates the operand can be any valid class.
109 'i
' indicates the operand can be immediate (in the instruction) data.
110 'r
' indicates the operand can be in a register.
111 'm
' indicates the operand can be in memory.
112 'o
' a subset of the 'm
' class. Those memory addressing modes that
113 can be offset at compile time (have a constant added to them).
115 Other characters indicate target dependent operand classes and
116 are described in each target's machine description.
118 For instructions with more than one operand
, sets of classes can be
119 separated by a comma to indicate the appropriate multi
-operand constraints.
120 There must be a
1 to
1 correspondence between these sets of classes in
121 all operands for an instruction.
123 DEF_RTL_EXPR(MATCH_OPERAND
, "match_operand", "iss", 'm')
125 /* Appears only in machine descriptions.
126 Means match a SCRATCH or a register. When used to generate rtl
, a
127 SCRATCH is generated. As for MATCH_OPERAND
, the mode specifies
128 the desired mode and the first argument is the operand number.
129 The second argument is the constraint.
*/
130 DEF_RTL_EXPR(MATCH_SCRATCH
, "match_scratch", "is", 'm')
132 /* Appears only in machine descriptions.
133 Means match only something equal to what is stored in the operand table
134 at the index specified by the argument.
*/
135 DEF_RTL_EXPR(MATCH_DUP
, "match_dup", "i", 'm')
137 /* Appears only in machine descriptions.
138 Means apply a predicate
, AND match recursively the operands of the rtx.
139 Operand
0 is the operand
-number
, as in match_operand.
140 Operand
1 is a predicate to
apply (as a string
, a function name
).
141 Operand
2 is a vector of expressions
, each of which must match
142 one subexpression of the rtx this construct is matching.
*/
143 DEF_RTL_EXPR(MATCH_OPERATOR
, "match_operator", "isE", 'm')
145 /* Appears only in machine descriptions.
146 Means to match a PARALLEL of arbitrary length. The predicate is applied
147 to the PARALLEL and the initial expressions in the PARALLEL are matched.
148 Operand
0 is the operand
-number
, as in match_operand.
149 Operand
1 is a predicate to apply to the PARALLEL.
150 Operand
2 is a vector of expressions
, each of which must match the
151 corresponding element in the PARALLEL.
*/
152 DEF_RTL_EXPR(MATCH_PARALLEL
, "match_parallel", "isE", 'm')
154 /* Appears only in machine descriptions.
155 Means match only something equal to what is stored in the operand table
156 at the index specified by the argument. For MATCH_OPERATOR.
*/
157 DEF_RTL_EXPR(MATCH_OP_DUP
, "match_op_dup", "iE", 'm')
159 /* Appears only in machine descriptions.
160 Means match only something equal to what is stored in the operand table
161 at the index specified by the argument. For MATCH_PARALLEL.
*/
162 DEF_RTL_EXPR(MATCH_PAR_DUP
, "match_par_dup", "iE", 'm')
164 /* Appears only in machine descriptions.
165 Operand
0 is the operand number
, as in match_operand.
166 Operand
1 is the predicate to apply to the insn.
*/
167 DEF_RTL_EXPR(MATCH_INSN
, "match_insn", "is", 'm')
169 /* Appears only in machine descriptions.
170 Defines the pattern for one kind of instruction.
172 0: names this instruction.
173 If the name is the null string
, the instruction is in the
174 machine description just to be recognized
, and will never be emitted by
175 the tree to rtl expander.
177 2: is a string which is a C expression
178 giving an additional condition for recognizing this pattern.
179 A null string means no extra condition.
180 3: is the action to execute if this pattern is matched.
181 If this assembler code template starts with a
* then it is a fragment of
182 C code to run to decide on a template to use. Otherwise
, it is the
184 4: optionally
, a vector of attributes for this insn.
186 DEF_RTL_EXPR(DEFINE_INSN
, "define_insn", "sEssV", 'x')
188 /* Definition of a peephole optimization.
189 1st operand
: vector of insn patterns to match
190 2nd operand
: C expression that must be true
191 3rd operand
: template or C code to produce assembler output.
192 4: optionally
, a vector of attributes for this insn.
194 DEF_RTL_EXPR(DEFINE_PEEPHOLE
, "define_peephole", "EssV", 'x')
196 /* Definition of a split operation.
197 1st operand
: insn pattern to match
198 2nd operand
: C expression that must be true
199 3rd operand
: vector of insn patterns to place into a SEQUENCE
200 4th operand
: optionally
, some C code to execute before generating the
201 insns. This might
, for example
, create some RTX
's and store them in
202 elements of `recog_operand' for use by the vector of insn
-patterns.
203 (`operands
' is an alias here for `recog_operand').
*/
204 DEF_RTL_EXPR(DEFINE_SPLIT
, "define_split", "EsES", 'x')
206 /* Definition of an insn and associated split.
207 This is the concatenation
, with a few modifications
, of a define_insn
208 and a define_split which share the same pattern.
210 0: names this instruction.
211 If the name is the null string
, the instruction is in the
212 machine description just to be recognized
, and will never be emitted by
213 the tree to rtl expander.
215 2: is a string which is a C expression
216 giving an additional condition for recognizing this pattern.
217 A null string means no extra condition.
218 3: is the action to execute if this pattern is matched.
219 If this assembler code template starts with a
* then it is a fragment of
220 C code to run to decide on a template to use. Otherwise
, it is the
222 4: C expression that must be true for split. This may start with
"&&"
223 in which case the split condition is the logical and of the insn
224 condition and what follows the
"&&" of this operand.
225 5: vector of insn patterns to place into a SEQUENCE
226 6: optionally
, some C code to execute before generating the
227 insns. This might
, for example
, create some RTX
's and store them in
228 elements of `recog_operand' for use by the vector of insn
-patterns.
229 (`operands
' is an alias here for `recog_operand').
230 7: optionally
, a vector of attributes for this insn.
*/
231 DEF_RTL_EXPR(DEFINE_INSN_AND_SPLIT
, "define_insn_and_split", "sEsssESV", 'x')
233 /* Definition of an RTL peephole operation.
234 Follows the same arguments as define_split.
*/
235 DEF_RTL_EXPR(DEFINE_PEEPHOLE2
, "define_peephole2", "EsES", 'x')
237 /* Definition of a combiner pattern.
238 Operands not defined yet.
*/
239 DEF_RTL_EXPR(DEFINE_COMBINE
, "define_combine", "Ess", 'x')
241 /* Define how to generate multiple insns for a standard insn name.
242 1st operand
: the insn name.
243 2nd operand
: vector of insn
-patterns.
244 Use match_operand to substitute an element of `recog_operand
'.
245 3rd operand: C expression that must be true for this to be available.
246 This may not test any operands.
247 4th operand: Extra C code to execute before generating the insns.
248 This might, for example, create some RTX's and store them in
249 elements of `recog_operand
' for use by the vector of insn-patterns.
250 (`operands' is an alias here for `recog_operand
'). */
251 DEF_RTL_EXPR(DEFINE_EXPAND, "define_expand", "sEss", 'x
')
253 /* Define a requirement for delay slots.
254 1st operand: Condition involving insn attributes that, if true,
255 indicates that the insn requires the number of delay slots
257 2nd operand: Vector whose length is the three times the number of delay
259 Each entry gives three conditions, each involving attributes.
260 The first must be true for an insn to occupy that delay slot
261 location. The second is true for all insns that can be
262 annulled if the branch is true and the third is true for all
263 insns that can be annulled if the branch is false.
265 Multiple DEFINE_DELAYs may be present. They indicate differing
266 requirements for delay slots. */
267 DEF_RTL_EXPR(DEFINE_DELAY, "define_delay", "eE", 'x
')
269 /* Define a set of insns that requires a function unit. This means that
270 these insns produce their result after a delay and that there may be
271 restrictions on the number of insns of this type that can be scheduled
274 More than one DEFINE_FUNCTION_UNIT can be specified for a function unit.
275 Each gives a set of operations and associated delays. The first three
276 operands must be the same for each operation for the same function unit.
278 All delays are specified in cycles.
280 1st operand: Name of function unit (mostly for documentation)
281 2nd operand: Number of identical function units in CPU
282 3rd operand: Total number of simultaneous insns that can execute on this
283 function unit; 0 if unlimited.
284 4th operand: Condition involving insn attribute, that, if true, specifies
285 those insns that this expression applies to.
286 5th operand: Constant delay after which insn result will be
288 6th operand: Delay until next insn can be scheduled on the function unit
289 executing this operation. The meaning depends on whether or
290 not the next operand is supplied.
291 7th operand: If this operand is not specified, the 6th operand gives the
292 number of cycles after the instruction matching the 4th
293 operand begins using the function unit until a subsequent
294 insn can begin. A value of zero should be used for a
295 unit with no issue constraints. If only one operation can
296 be executed a time and the unit is busy for the entire time,
297 the 3rd operand should be specified as 1, the 6th operand
298 should be specified as 0, and the 7th operand should not
301 If this operand is specified, it is a list of attribute
302 expressions. If an insn for which any of these expressions
303 is true is currently executing on the function unit, the
304 issue delay will be given by the 6th operand. Otherwise,
305 the insn can be immediately scheduled (subject to the limit
306 on the number of simultaneous operations executing on the
308 DEF_RTL_EXPR(DEFINE_FUNCTION_UNIT, "define_function_unit", "siieiiV", 'x
')
310 /* Define attribute computation for `asm' instructions.
*/
311 DEF_RTL_EXPR(DEFINE_ASM_ATTRIBUTES
, "define_asm_attributes", "V", 'x' )
313 /* Definition of a conditional execution meta operation. Automatically
314 generates new instances of DEFINE_INSN
, selected by having attribute
315 "predicable" true. The new pattern will contain a COND_EXEC and the
316 predicate at top
-level.
319 0: The predicate pattern. The top
-level form should match a
320 relational operator. Operands should have only one alternative.
321 1: A C expression giving an additional condition for recognizing
322 the generated pattern.
323 2: A template or C code to produce assembler output.
*/
324 DEF_RTL_EXPR(DEFINE_COND_EXEC
, "define_cond_exec", "Ess", 'x')
326 /* SEQUENCE appears in the result of a `gen_...
' function
327 for a DEFINE_EXPAND that wants to make several insns.
328 Its elements are the bodies of the insns that should be made.
329 `emit_insn' takes the SEQUENCE apart and makes separate insns.
*/
330 DEF_RTL_EXPR(SEQUENCE
, "sequence", "E", 'x')
332 /* Refers to the address of its argument. This is only used in alias.c.
*/
333 DEF_RTL_EXPR(ADDRESS
, "address", "e", 'm')
335 /* ----------------------------------------------------------------------
336 Expressions used for insn attributes. These also do not appear in
337 actual rtl code in the compiler.
338 ---------------------------------------------------------------------- */
340 /* Definition of an insn attribute.
341 1st operand
: name of the attribute
342 2nd operand
: comma
-separated list of possible attribute values
343 3rd operand
: expression for the default value of the attribute.
*/
344 DEF_RTL_EXPR(DEFINE_ATTR
, "define_attr", "sse", 'x')
346 /* Marker for the name of an attribute.
*/
347 DEF_RTL_EXPR(ATTR
, "attr", "s", 'x')
349 /* For use in the
last (optional
) operand of DEFINE_INSN or DEFINE_PEEPHOLE and
350 in DEFINE_ASM_INSN to specify an attribute to assign to insns matching that
353 (set_attr
"name" "value") is equivalent to
354 (set (attr
"name") (const_string
"value")) */
355 DEF_RTL_EXPR(SET_ATTR
, "set_attr", "ss", 'x')
357 /* In the last operand of DEFINE_INSN and DEFINE_PEEPHOLE
, this can be used to
358 specify that attribute values are to be assigned according to the
361 The following three expressions are equivalent
:
363 (set (attr
"att") (cond
[(eq_attrq
"alternative" "1") (const_string
"a1")
364 (eq_attrq
"alternative" "2") (const_string
"a2")]
365 (const_string
"a3")))
366 (set_attr_alternative
"att" [(const_string
"a1") (const_string
"a2")
367 (const_string
"a3")])
368 (set_attr
"att" "a1,a2,a3")
370 DEF_RTL_EXPR(SET_ATTR_ALTERNATIVE
, "set_attr_alternative", "sE", 'x')
372 /* A conditional expression true if the value of the specified attribute of
373 the current insn equals the specified value. The first operand is the
374 attribute name and the second is the comparison value.
*/
375 DEF_RTL_EXPR(EQ_ATTR
, "eq_attr", "ss", 'x')
377 /* A conditional expression which is true if the specified flag is
378 true for the insn being scheduled in reorg.
380 genattr.c defines the following flags which can be tested by
381 (attr_flag
"foo") expressions in eligible_for_delay.
383 forward
, backward
, very_likely
, likely
, very_unlikely
, and unlikely.
*/
385 DEF_RTL_EXPR (ATTR_FLAG
, "attr_flag", "s", 'x')
387 /* ----------------------------------------------------------------------
388 Expression types used for things in the instruction chain.
390 All formats must start with
"iuu" to handle the chain.
391 Each insn expression holds an rtl instruction and its semantics
392 during back
-end processing.
393 See macros
's in "rtl.h" for the meaning of each rtx->fld[].
395 ---------------------------------------------------------------------- */
397 /* An instruction that cannot jump. */
398 DEF_RTL_EXPR(INSN, "insn", "iuueiee", 'i
')
400 /* An instruction that can possibly jump.
401 Fields ( rtx->fld[] ) have exact same meaning as INSN's.
*/
402 DEF_RTL_EXPR(JUMP_INSN
, "jump_insn", "iuueiee0", 'i')
404 /* An instruction that can possibly call a subroutine
405 but which will not change which instruction comes next
406 in the current function.
407 Field ( rtx
->fld
[7] ) is CALL_INSN_FUNCTION_USAGE.
408 All other
fields ( rtx
->fld
[] ) have exact same meaning as INSN
's. */
409 DEF_RTL_EXPR(CALL_INSN, "call_insn", "iuueieee", 'i
')
411 /* A marker that indicates that control will not flow through. */
412 DEF_RTL_EXPR(BARRIER, "barrier", "iuu", 'x
')
414 /* Holds a label that is followed by instructions.
416 3: is used in jump.c for the use-count of the label.
417 4: is used in flow.c to point to the chain of label_ref's to this label.
418 5: is a number that is unique in the entire compilation.
419 6: is the user
-given name of the label
, if any.
420 7: is the alternate label name.
*/
421 DEF_RTL_EXPR(CODE_LABEL
, "code_label", "iuu00iss", 'x')
423 /* Say where in the code a source line starts
, for symbol table
's sake.
425 3: filename, if line number > 0, note-specific data otherwise.
426 4: line number if > 0, enum note_insn otherwise.
427 5: unique number if line number == note_insn_deleted_label. */
428 DEF_RTL_EXPR(NOTE, "note", "iuu0ni", 'x
')
430 /* ----------------------------------------------------------------------
431 Top level constituents of INSN, JUMP_INSN and CALL_INSN.
432 ---------------------------------------------------------------------- */
434 /* Conditionally execute code.
435 Operand 0 is the condition that if true, the code is executed.
436 Operand 1 is the code to be executed (typically a SET).
438 Semantics are that there are no side effects if the condition
439 is false. This pattern is created automatically by the if_convert
440 pass run after reload or by target-specific splitters. */
441 DEF_RTL_EXPR(COND_EXEC, "cond_exec", "ee", 'x
')
443 /* Several operations to be done in parallel (perhaps under COND_EXEC). */
444 DEF_RTL_EXPR(PARALLEL, "parallel", "E", 'x
')
446 /* A string that is passed through to the assembler as input.
447 One can obviously pass comments through by using the
448 assembler comment syntax.
449 These occur in an insn all by themselves as the PATTERN.
450 They also appear inside an ASM_OPERANDS
451 as a convenient way to hold a string. */
452 DEF_RTL_EXPR(ASM_INPUT, "asm_input", "s", 'x
')
454 /* An assembler instruction with operands.
455 1st operand is the instruction template.
456 2nd operand is the constraint for the output.
457 3rd operand is the number of the output this expression refers to.
458 When an insn stores more than one value, a separate ASM_OPERANDS
459 is made for each output; this integer distinguishes them.
460 4th is a vector of values of input operands.
461 5th is a vector of modes and constraints for the input operands.
462 Each element is an ASM_INPUT containing a constraint string
463 and whose mode indicates the mode of the input operand.
464 6th is the name of the containing source file.
465 7th is the source line number. */
466 DEF_RTL_EXPR(ASM_OPERANDS, "asm_operands", "ssiEEsi", 'x
')
468 /* A machine-specific operation.
469 1st operand is a vector of operands being used by the operation so that
470 any needed reloads can be done.
471 2nd operand is a unique value saying which of a number of machine-specific
472 operations is to be performed.
473 (Note that the vector must be the first operand because of the way that
474 genrecog.c record positions within an insn.)
475 This can occur all by itself in a PATTERN, as a component of a PARALLEL,
476 or inside an expression. */
477 DEF_RTL_EXPR(UNSPEC, "unspec", "Ei", 'x
')
479 /* Similar, but a volatile operation and one which may trap. */
480 DEF_RTL_EXPR(UNSPEC_VOLATILE, "unspec_volatile", "Ei", 'x
')
482 /* Vector of addresses, stored as full words. */
483 /* Each element is a LABEL_REF to a CODE_LABEL whose address we want. */
484 DEF_RTL_EXPR(ADDR_VEC, "addr_vec", "E", 'x
')
486 /* Vector of address differences X0 - BASE, X1 - BASE, ...
487 First operand is BASE; the vector contains the X's.
488 The machine mode of this rtx says how much space to leave
489 for each difference and is adjusted by branch shortening if
490 CASE_VECTOR_SHORTEN_MODE is defined.
491 The third and fourth operands store the target labels with the
492 minimum and maximum addresses respectively.
493 The fifth operand stores flags for use by branch shortening.
494 Set at the start of shorten_branches
:
495 min_align
: the minimum alignment for any of the target labels.
496 base_after_vec
: true iff BASE is after the ADDR_DIFF_VEC.
497 min_after_vec
: true iff minimum addr target label is after the ADDR_DIFF_VEC.
498 max_after_vec
: true iff maximum addr target label is after the ADDR_DIFF_VEC.
499 min_after_base
: true iff minimum address target label is after BASE.
500 max_after_base
: true iff maximum address target label is after BASE.
501 Set by the actual branch shortening process
:
502 offset_unsigned
: true iff offsets have to be treated as unsigned.
503 scale
: scaling that is necessary to make offsets fit into the mode.
505 The third
, fourth and fifth operands are only valid when
506 CASE_VECTOR_SHORTEN_MODE is defined
, and only in an optimizing
509 DEF_RTL_EXPR(ADDR_DIFF_VEC
, "addr_diff_vec", "eEee0", 'x')
511 /* ----------------------------------------------------------------------
512 At the top level of an
instruction (perhaps under PARALLEL
).
513 ---------------------------------------------------------------------- */
516 Operand
1 is the
location (REG
, MEM
, PC
, CC0 or whatever
) assigned to.
517 Operand
2 is the value stored there.
518 ALL assignment must use
SET.
519 Instructions that do multiple assignments must use multiple
SET,
521 DEF_RTL_EXPR(SET, "set", "ee", 'x')
523 /* Indicate something is used in a way that we don
't want to explain.
524 For example, subroutine calls will use the register
525 in which the static chain is passed. */
526 DEF_RTL_EXPR(USE, "use", "e", 'x
')
528 /* Indicate something is clobbered in a way that we don't want to explain.
529 For example
, subroutine calls will clobber some physical registers
530 (the ones that are by convention not saved
).
*/
531 DEF_RTL_EXPR(CLOBBER
, "clobber", "e", 'x')
533 /* Call a subroutine.
534 Operand
1 is the address to call.
535 Operand
2 is the number of arguments.
*/
537 DEF_RTL_EXPR(CALL
, "call", "ee", 'x')
539 /* Return from a subroutine.
*/
541 DEF_RTL_EXPR(RETURN, "return", "", 'x')
544 Operand
1 is the condition.
545 Operand
2 is the trap code.
546 For an unconditional trap
, make the
condition (const_int
1).
*/
547 DEF_RTL_EXPR(TRAP_IF
, "trap_if", "ee", 'x')
549 /* ----------------------------------------------------------------------
550 Primitive values for use in expressions.
551 ---------------------------------------------------------------------- */
553 /* numeric integer constant
*/
554 DEF_RTL_EXPR(CONST_INT
, "const_int", "w", 'o')
556 /* numeric floating point constant.
557 Operand
0 ('e') is the MEM that stores this constant in memory
, or
558 various other
things (see comments at immed_double_const in
560 Operand
1 ('0') is a chain of all CONST_DOUBLEs in use in the
562 Remaining operands hold the actual value. They are all
'w' and
563 there may be from
1 to
4; see rtl.c.
*/
564 DEF_RTL_EXPR(CONST_DOUBLE
, "const_double", CONST_DOUBLE_FORMAT
, 'o')
566 /* String constant. Used only for attributes right now.
*/
567 DEF_RTL_EXPR(CONST_STRING
, "const_string", "s", 'o')
569 /* This is used to encapsulate an expression whose value is constant
570 (such as the sum of a SYMBOL_REF and a CONST_INT
) so that it will be
571 recognized as a constant operand rather than by arithmetic instructions.
*/
573 DEF_RTL_EXPR(CONST, "const", "e", 'o')
575 /* program counter. Ordinary jumps are represented
576 by a
SET whose first operand
is (PC
).
*/
577 DEF_RTL_EXPR(PC
, "pc", "", 'o')
579 /* Used in the cselib routines to describe a value.
*/
580 DEF_RTL_EXPR(VALUE
, "value", "0", 'o')
582 /* A register. The
"operand" is the register number
, accessed with
583 the REGNO macro. If this number is less than FIRST_PSEUDO_REGISTER
584 than a hardware register is being referred to. The second operand
585 doesn
't really exist. Unfortunately, however, the compiler
586 implicitly assumes that a REG can be transformed in place into a
587 MEM, and therefore that a REG is at least as big as a MEM. To
588 avoid this memory overhead, which is likely to be substantial,
589 search for uses of PUT_CODE that turn REGs into MEMs, and fix them
590 somehow. Then, the trailing `0' can be removed here.
*/
591 DEF_RTL_EXPR(REG
, "reg", "i0", 'o')
593 /* A scratch register. This represents a register used only within a
594 single insn. It will be turned into a REG during register allocation
595 or reload unless the constraint indicates that the register won
't be
596 needed, in which case it can remain a SCRATCH. This code is
597 marked as having one operand so it can be turned into a REG. */
598 DEF_RTL_EXPR(SCRATCH, "scratch", "0", 'o
')
600 /* One word of a multi-word value.
601 The first operand is the complete value; the second says which word.
602 The WORDS_BIG_ENDIAN flag controls whether word number 0
603 (as numbered in a SUBREG) is the most or least significant word.
605 This is also used to refer to a value in a different machine mode.
606 For example, it can be used to refer to a SImode value as if it were
607 Qimode, or vice versa. Then the word number is always 0. */
608 DEF_RTL_EXPR(SUBREG, "subreg", "ei", 'x
')
610 /* This one-argument rtx is used for move instructions
611 that are guaranteed to alter only the low part of a destination.
612 Thus, (SET (SUBREG:HI (REG...)) (MEM:HI ...))
613 has an unspecified effect on the high part of REG,
614 but (SET (STRICT_LOW_PART (SUBREG:HI (REG...))) (MEM:HI ...))
615 is guaranteed to alter only the bits of REG that are in HImode.
617 The actual instruction used is probably the same in both cases,
618 but the register constraints may be tighter when STRICT_LOW_PART
621 DEF_RTL_EXPR(STRICT_LOW_PART, "strict_low_part", "e", 'x
')
623 /* (CONCAT a b) represents the virtual concatenation of a and b
624 to make a value that has as many bits as a and b put together.
625 This is used for complex values. Normally it appears only
626 in DECL_RTLs and during RTL generation, but not in the insn chain. */
627 DEF_RTL_EXPR(CONCAT, "concat", "ee", 'o
')
629 /* A memory location; operand is the address. Can be nested inside a
630 VOLATILE. The second operand is the alias set to which this MEM
631 belongs. We use `0' instead of `w
' for this field so that the
632 field need not be specified in machine descriptions. */
633 DEF_RTL_EXPR(MEM, "mem", "e0", 'o
')
635 /* Reference to an assembler label in the code for this function.
636 The operand is a CODE_LABEL found in the insn chain.
637 The unprinted fields 1 and 2 are used in flow.c for the
638 LABEL_NEXTREF and CONTAINING_INSN. */
639 DEF_RTL_EXPR(LABEL_REF, "label_ref", "u00", 'o
')
641 /* Reference to a named label: the string that is the first operand,
642 with `_' added implicitly in front.
643 Exception
: if the first character explicitly given is `
*',
644 to give it to the assembler, remove the `*' and do not add `_
'. */
645 DEF_RTL_EXPR(SYMBOL_REF, "symbol_ref", "s", 'o
')
647 /* The condition code register is represented, in our imagination,
648 as a register holding a value that can be compared to zero.
649 In fact, the machine has already compared them and recorded the
650 results; but instructions that look at the condition code
651 pretend to be looking at the entire value and comparing it. */
652 DEF_RTL_EXPR(CC0, "cc0", "", 'o
')
654 /* Reference to the address of a register. Removed by purge_addressof after
655 CSE has elided as many as possible.
656 1st operand: the register we may need the address of.
657 2nd operand: the original pseudo regno we were generated for.
658 3rd operand: the decl for the object in the register, for
661 DEF_RTL_EXPR(ADDRESSOF, "addressof", "eit", 'o
')
663 /* =====================================================================
664 A QUEUED expression really points to a member of the queue of instructions
665 to be output later for postincrement/postdecrement.
666 QUEUED expressions never become part of instructions.
667 When a QUEUED expression would be put into an instruction,
668 instead either the incremented variable or a copy of its previous
672 0. the variable to be incremented (a REG rtx).
673 1. the incrementing instruction, or 0 if it hasn't been output yet.
674 2. A REG rtx for a copy of the old value of the variable
, or
0 if none yet.
675 3. the body to use for the incrementing instruction
676 4. the next QUEUED expression in the queue.
677 ====================================================================== */
679 DEF_RTL_EXPR(QUEUED
, "queued", "eeeee", 'x')
681 /* ----------------------------------------------------------------------
682 Expressions for operators in an rtl pattern
683 ---------------------------------------------------------------------- */
685 /* if_then_else. This is used in representing ordinary
686 conditional jump instructions.
691 DEF_RTL_EXPR(IF_THEN_ELSE
, "if_then_else", "eee", '3')
693 /* General conditional. The first operand is a vector composed of pairs of
694 expressions. The first element of each pair is evaluated
, in turn.
695 The value of the conditional is the second expression of the first pair
696 whose first expression evaluates non
-zero. If none of the expressions is
697 true
, the second operand will be used as the value of the conditional.
699 This should be replaced with use of IF_THEN_ELSE.
*/
700 DEF_RTL_EXPR(COND
, "cond", "Ee", 'x')
702 /* Comparison
, produces a condition code result.
*/
703 DEF_RTL_EXPR(COMPARE
, "compare", "ee", '2')
706 DEF_RTL_EXPR(PLUS
, "plus", "ee", 'c')
708 /* Operand
0 minus operand
1.
*/
709 DEF_RTL_EXPR(MINUS
, "minus", "ee", '2')
711 /* Minus operand
0.
*/
712 DEF_RTL_EXPR(NEG
, "neg", "e", '1')
714 DEF_RTL_EXPR(MULT
, "mult", "ee", 'c')
716 /* Operand
0 divided by operand
1.
*/
717 DEF_RTL_EXPR(DIV, "div", "ee", '2')
718 /* Remainder of operand
0 divided by operand
1.
*/
719 DEF_RTL_EXPR(MOD, "mod", "ee", '2')
721 /* Unsigned divide and remainder.
*/
722 DEF_RTL_EXPR(UDIV
, "udiv", "ee", '2')
723 DEF_RTL_EXPR(UMOD
, "umod", "ee", '2')
725 /* Bitwise operations.
*/
726 DEF_RTL_EXPR(AND, "and", "ee", 'c')
728 DEF_RTL_EXPR(IOR
, "ior", "ee", 'c')
730 DEF_RTL_EXPR(XOR
, "xor", "ee", 'c')
732 DEF_RTL_EXPR(NOT, "not", "e", '1')
735 0: value to be shifted.
736 1: number of bits.
*/
737 DEF_RTL_EXPR(ASHIFT
, "ashift", "ee", '2') /* shift left
*/
738 DEF_RTL_EXPR(ROTATE
, "rotate", "ee", '2') /* rotate left
*/
739 DEF_RTL_EXPR(ASHIFTRT
, "ashiftrt", "ee", '2') /* arithmetic shift right
*/
740 DEF_RTL_EXPR(LSHIFTRT
, "lshiftrt", "ee", '2') /* logical shift right
*/
741 DEF_RTL_EXPR(ROTATERT
, "rotatert", "ee", '2') /* rotate right
*/
743 /* Minimum and maximum values of two operands. We need both signed and
744 unsigned forms.
(We cannot use
MIN for SMIN because it conflicts
745 with a macro of the same name.
) */
747 DEF_RTL_EXPR(SMIN
, "smin", "ee", 'c')
748 DEF_RTL_EXPR(SMAX
, "smax", "ee", 'c')
749 DEF_RTL_EXPR(UMIN
, "umin", "ee", 'c')
750 DEF_RTL_EXPR(UMAX
, "umax", "ee", 'c')
752 /* These unary operations are used to represent incrementation
753 and decrementation as they occur in memory addresses.
754 The amount of increment or decrement are not represented
755 because they can be understood from the machine
-mode of the
756 containing MEM. These operations exist in only two cases
:
757 1. pushes onto the stack.
758 2. created automatically by the life_analysis pass in flow.c.
*/
759 DEF_RTL_EXPR(PRE_DEC
, "pre_dec", "e", 'x')
760 DEF_RTL_EXPR(PRE_INC
, "pre_inc", "e", 'x')
761 DEF_RTL_EXPR(POST_DEC
, "post_dec", "e", 'x')
762 DEF_RTL_EXPR(POST_INC
, "post_inc", "e", 'x')
764 /* These binary operations are used to represent generic address
765 side
-effects in memory addresses
, except for simple incrementation
766 or decrementation which use the above operations. They are
767 created automatically by the life_analysis pass in flow.c.
768 (Note that these operators are currently placeholders.
) */
769 DEF_RTL_EXPR(PRE_MODIFY
, "pre_modify", "ee", 'x')
770 DEF_RTL_EXPR(POST_MODIFY
, "post_modify", "ee", 'x')
772 /* Comparison operations. The ordered comparisons exist in two
773 flavors
, signed and unsigned.
*/
774 DEF_RTL_EXPR(NE
, "ne", "ee", '<')
775 DEF_RTL_EXPR(EQ
, "eq", "ee", '<')
776 DEF_RTL_EXPR(GE
, "ge", "ee", '<')
777 DEF_RTL_EXPR(GT
, "gt", "ee", '<')
778 DEF_RTL_EXPR(LE
, "le", "ee", '<')
779 DEF_RTL_EXPR(LT
, "lt", "ee", '<')
780 DEF_RTL_EXPR(GEU
, "geu", "ee", '<')
781 DEF_RTL_EXPR(GTU
, "gtu", "ee", '<')
782 DEF_RTL_EXPR(LEU
, "leu", "ee", '<')
783 DEF_RTL_EXPR(LTU
, "ltu", "ee", '<')
785 /* Additional floating point unordered comparision flavors.
*/
786 DEF_RTL_EXPR(UNORDERED
, "unordered", "ee", '<')
787 DEF_RTL_EXPR(ORDERED
, "ordered", "ee", '<')
789 /* These are equivalent to unordered or ...
*/
790 DEF_RTL_EXPR(UNEQ
, "uneq", "ee", '<')
791 DEF_RTL_EXPR(UNGE
, "unge", "ee", '<')
792 DEF_RTL_EXPR(UNGT
, "ungt", "ee", '<')
793 DEF_RTL_EXPR(UNLE
, "unle", "ee", '<')
794 DEF_RTL_EXPR(UNLT
, "unlt", "ee", '<')
796 /* This is an ordered NE
, ie
!UNEQ
, ie false for NaN.
*/
797 DEF_RTL_EXPR(LTGT
, "ltgt", "ee", '<')
799 /* Represents the result of sign
-extending the sole operand.
800 The machine modes of the operand and of the SIGN_EXTEND expression
801 determine how much sign
-extension is going on.
*/
802 DEF_RTL_EXPR(SIGN_EXTEND
, "sign_extend", "e", '1')
804 /* Similar for zero
-extension (such as unsigned short to int
).
*/
805 DEF_RTL_EXPR(ZERO_EXTEND
, "zero_extend", "e", '1')
807 /* Similar but here the operand has a wider mode.
*/
808 DEF_RTL_EXPR(TRUNCATE
, "truncate", "e", '1')
810 /* Similar for extending floating
-point
values (such as SFmode to DFmode
).
*/
811 DEF_RTL_EXPR(FLOAT_EXTEND
, "float_extend", "e", '1')
812 DEF_RTL_EXPR(FLOAT_TRUNCATE
, "float_truncate", "e", '1')
814 /* Conversion of fixed point operand to floating point value.
*/
815 DEF_RTL_EXPR(FLOAT, "float", "e", '1')
817 /* With fixed
-point machine mode
:
818 Conversion of floating point operand to fixed point value.
819 Value is defined only when the operand
's value is an integer.
820 With floating-point machine mode (and operand with same mode):
821 Operand is rounded toward zero to produce an integer value
822 represented in floating point. */
823 DEF_RTL_EXPR(FIX, "fix", "e", '1')
825 /* Conversion of unsigned fixed point operand to floating point value. */
826 DEF_RTL_EXPR(UNSIGNED_FLOAT, "unsigned_float", "e", '1')
828 /* With fixed-point machine mode:
829 Conversion of floating point operand to *unsigned* fixed point value.
830 Value is defined only when the operand's value is an integer.
*/
831 DEF_RTL_EXPR(UNSIGNED_FIX
, "unsigned_fix", "e", '1')
834 DEF_RTL_EXPR(ABS, "abs", "e", '1')
837 DEF_RTL_EXPR(SQRT
, "sqrt", "e", '1')
839 /* Find first bit that is set.
840 Value is
1 + number of trailing zeros in the arg.
,
842 DEF_RTL_EXPR(FFS
, "ffs", "e", '1')
844 /* Reference to a signed bit
-field of specified size and position.
845 Operand
0 is the memory
unit (usually SImode or QImode
) which
846 contains the field
's first bit. Operand 1 is the width, in bits.
847 Operand 2 is the number of bits in the memory unit before the
848 first bit of this field.
849 If BITS_BIG_ENDIAN is defined, the first bit is the msb and
850 operand 2 counts from the msb of the memory unit.
851 Otherwise, the first bit is the lsb and operand 2 counts from
852 the lsb of the memory unit. */
853 DEF_RTL_EXPR(SIGN_EXTRACT, "sign_extract", "eee", 'b
')
855 /* Similar for unsigned bit-field. */
856 DEF_RTL_EXPR(ZERO_EXTRACT, "zero_extract", "eee", 'b
')
858 /* For RISC machines. These save memory when splitting insns. */
860 /* HIGH are the high-order bits of a constant expression. */
861 DEF_RTL_EXPR(HIGH, "high", "e", 'o
')
863 /* LO_SUM is the sum of a register and the low-order bits
864 of a constant expression. */
865 DEF_RTL_EXPR(LO_SUM, "lo_sum", "ee", 'o
')
867 /* Header for range information. Operand 0 is the NOTE_INSN_RANGE_BEG insn.
868 Operand 1 is the NOTE_INSN_RANGE_END insn. Operand 2 is a vector of all of
869 the registers that can be substituted within this range. Operand 3 is the
870 number of calls in the range. Operand 4 is the number of insns in the
871 range. Operand 5 is the unique range number for this range. Operand 6 is
872 the basic block # of the start of the live range. Operand 7 is the basic
873 block # of the end of the live range. Operand 8 is the loop depth. Operand
874 9 is a bitmap of the registers live at the start of the range. Operand 10
875 is a bitmap of the registers live at the end of the range. Operand 11 is
876 marker number for the start of the range. Operand 12 is the marker number
877 for the end of the range. */
878 DEF_RTL_EXPR(RANGE_INFO, "range_info", "uuEiiiiiibbii", 'x
')
880 /* Registers that can be substituted within the range. Operand 0 is the
881 original pseudo register number. Operand 1 will be filled in with the
882 pseudo register the value is copied for the duration of the range. Operand
883 2 is the number of references within the range to the register. Operand 3
884 is the number of sets or clobbers of the register in the range. Operand 4
885 is the number of deaths the register has. Operand 5 is the copy flags that
886 give the status of whether a copy is needed from the original register to
887 the new register at the beginning of the range, or whether a copy from the
888 new register back to the original at the end of the range. Operand 6 is the
889 live length. Operand 7 is the number of calls that this register is live
890 across. Operand 8 is the symbol node of the variable if the register is a
891 user variable. Operand 9 is the block node that the variable is declared
892 in if the register is a user variable. */
893 DEF_RTL_EXPR(RANGE_REG, "range_reg", "iiiiiiiitt", 'x
')
895 /* Information about a local variable's ranges. Operand
0 is an EXPR_LIST of
896 the different ranges a variable is in where it is copied to a different
897 pseudo register. Operand
1 is the block that the variable is declared in.
898 Operand
2 is the number of distinct ranges.
*/
899 DEF_RTL_EXPR(RANGE_VAR
, "range_var", "eti", 'x')
901 /* Information about the registers that are live at the current point. Operand
902 0 is the live bitmap. Operand
1 is the original block number.
*/
903 DEF_RTL_EXPR(RANGE_LIVE
, "range_live", "bi", 'x')
905 /* A unary `__builtin_constant_p
' expression. These are only emitted
906 during RTL generation, and then only if optimize > 0. They are
907 eliminated by the first CSE pass. */
908 DEF_RTL_EXPR(CONSTANT_P_RTX, "constant_p_rtx", "e", 'x
')
910 /* A placeholder for a CALL_INSN which may be turned into a normal call,
911 a sibling (tail) call or tail recursion.
913 Immediately after RTL generation, this placeholder will be replaced
914 by the insns to perform the call, sibcall or tail recursion.
916 This RTX has 4 operands. The first three are lists of instructions to
917 perform the call as a normal call, sibling call and tail recursion
918 respectively. The latter two lists may be NULL, the first may never
921 The last operand is the tail recursion CODE_LABEL, which may be NULL if no
922 potential tail recursive calls were found.
924 The tail recursion label is needed so that we can clear LABEL_PRESERVE_P
925 after we select a call method.
927 This method of tail-call elimination is intended to be replaced by
928 tree-based optimizations once front-end conversions are complete. */
929 DEF_RTL_EXPR(CALL_PLACEHOLDER, "call_placeholder", "uuuu", 'x
')
931 /* The SSA phi operator.
933 The argument is a vector of 2N rtxes. Element 2N+1 is a CONST_INT
934 containing the block number of the predecessor through which control
935 has passed when the register at element 2N is used.
937 Note that PHI may only appear at the beginning of a basic block.
939 ??? There may be multiple PHI insns, but they are all evaluated
940 in parallel. This probably ought to be changed to use a real
941 PARALLEL, as that would be less confusing and more in the spirit
942 of canonical RTL. It is, however, easier to manipulate this way. */
943 DEF_RTL_EXPR(PHI, "phi", "E", 'x
')