1 ------------------------------------------------------------------------------
3 -- GNAT COMPILER COMPONENTS --
9 -- Copyright (C) 1992-2005 Free Software Foundation, Inc. --
11 -- GNAT is free software; you can redistribute it and/or modify it under --
12 -- terms of the GNU General Public License as published by the Free Soft- --
13 -- ware Foundation; either version 2, or (at your option) any later ver- --
14 -- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
15 -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
16 -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
17 -- for more details. You should have received a copy of the GNU General --
18 -- Public License distributed with GNAT; see file COPYING. If not, write --
19 -- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
20 -- MA 02111-1307, USA. --
22 -- As a special exception, if other files instantiate generics from this --
23 -- unit, or you link this unit with other files to produce an executable, --
24 -- this unit does not by itself cause the resulting executable to be --
25 -- covered by the GNU General Public License. This exception does not --
26 -- however invalidate any other reasons why the executable file might be --
27 -- covered by the GNU Public License. --
29 -- GNAT was originally developed by the GNAT team at New York University. --
30 -- Extensive contributions were provided by Ada Core Technologies Inc. --
32 ------------------------------------------------------------------------------
34 with Unchecked_Deallocation
;
37 pragma Preelaborate
(Types
);
39 -- This package contains host independent type definitions which are used
40 -- in more than one unit in the compiler. They are gathered here for easy
41 -- reference, though in some cases the full description is found in the
42 -- relevant module which implements the definition. The main reason that
43 -- they are not in their "natural" specs is that this would cause a lot of
44 -- inter-spec dependencies, and in particular some awkward circular
45 -- dependencies would have to be dealt with.
47 -- WARNING: There is a C version of this package. Any changes to this
48 -- source file must be properly reflected in the C header file a-types.h
50 -- Note: the declarations in this package reflect an expectation that the
51 -- host machine has an efficient integer base type with a range at least
52 -- 32 bits 2s-complement. If there are any machines for which this is not
53 -- a correct assumption, a significant number of changes will be required!
55 -------------------------------
56 -- General Use Integer Types --
57 -------------------------------
59 type Int
is range -2 ** 31 .. +2 ** 31 - 1;
60 -- Signed 32-bit integer
62 type Dint
is range -2 ** 63 .. +2 ** 63 - 1;
63 -- Double length (64-bit) integer
65 subtype Nat
is Int
range 0 .. Int
'Last;
66 -- Non-negative Int values
68 subtype Pos
is Int
range 1 .. Int
'Last;
69 -- Positive Int values
71 type Word
is mod 2 ** 32;
72 -- Unsigned 32-bit integer
74 type Short
is range -32768 .. +32767;
75 for Short
'Size use 16;
76 -- 16-bit signed integer
78 type Byte
is mod 2 ** 8;
80 -- 8-bit unsigned integer
82 type size_t
is mod 2 ** Standard
'Address_Size;
83 -- Memory size value, for use in calls to C routines
85 --------------------------------------
86 -- 8-Bit Character and String Types --
87 --------------------------------------
89 -- We use Standard.Character and Standard.String freely, since we are
90 -- compiling ourselves, and we properly implement the required 8-bit
91 -- character code as required in Ada 95. This section defines a few
92 -- general use constants and subtypes.
94 EOF
: constant Character := ASCII
.SUB
;
95 -- The character SUB (16#1A#) is used in DOS and other systems derived
96 -- from DOS (OS/2, NT etc) to signal the end of a text file. Internally
97 -- all source files are ended by an EOF character, even on Unix systems.
98 -- An EOF character acts as the end of file only as the last character
99 -- of a source buffer, in any other position, it is treated as a blank
100 -- if it appears between tokens, and as an illegal character otherwise.
101 -- This makes life easier dealing with files that originated from DOS,
102 -- including concatenated files with interspersed EOF characters.
104 subtype Graphic_Character
is Character range ' ' .. '~';
105 -- Graphic characters, as defined in ARM
107 subtype Line_Terminator
is Character range ASCII
.LF
.. ASCII
.CR
;
108 -- Line terminator characters (LF, VT, FF, CR)
109 -- This definition is dubious now that we have two more wide character
110 -- sequences that constitute a line terminator. Every reference to
111 -- this subtype needs checking to make sure the wide character case
112 -- is handled appropriately.
114 subtype Upper_Half_Character
is
115 Character range Character'Val (16#
80#
) .. Character'Val (16#FF#
);
116 -- Characters with the upper bit set
118 type Character_Ptr
is access all Character;
119 type String_Ptr
is access all String;
120 -- Standard character and string pointers
122 procedure Free
is new Unchecked_Deallocation
(String, String_Ptr
);
123 -- Procedure for freeing dynamically allocated String values
125 subtype Word_Hex_String
is String (1 .. 8);
126 -- Type used to represent Word value as 8 hex digits, with lower case
127 -- letters for the alphabetic cases.
129 function Get_Hex_String
(W
: Word
) return Word_Hex_String
;
130 -- Convert word value to 8-character hex string
132 -----------------------------------------
133 -- Types Used for Text Buffer Handling --
134 -----------------------------------------
136 -- We can't use type String for text buffers, since we must use the
137 -- standard 32-bit integer as an index value, since we count on all
138 -- index values being the same size.
140 type Text_Ptr
is new Int
;
141 -- Type used for subscripts in text buffer
143 type Text_Buffer
is array (Text_Ptr
range <>) of Character;
144 -- Text buffer used to hold source file or library information file
146 type Text_Buffer_Ptr
is access all Text_Buffer
;
147 -- Text buffers for input files are allocated dynamically and this type
148 -- is used to reference these text buffers.
150 procedure Free
is new Unchecked_Deallocation
(Text_Buffer
, Text_Buffer_Ptr
);
151 -- Procedure for freeing dynamically allocated text buffers
153 ------------------------------------------
154 -- Types Used for Source Input Handling --
155 ------------------------------------------
157 type Logical_Line_Number
is range 0 .. Int
'Last;
158 for Logical_Line_Number
'Size use 32;
159 -- Line number type, used for storing logical line numbers (i.e. line
160 -- numbers that include effects of any Source_Reference pragmas in the
161 -- source file). The value zero indicates a line containing a source
164 No_Line_Number
: constant Logical_Line_Number
:= 0;
165 -- Special value used to indicate no line number
167 type Physical_Line_Number
is range 1 .. Int
'Last;
168 for Physical_Line_Number
'Size use 32;
169 -- Line number type, used for storing physical line numbers (i.e.
170 -- line numbers in the physical file being compiled, unaffected by
171 -- the presence of source reference pragmas.
173 type Column_Number
is range 0 .. 32767;
174 for Column_Number
'Size use 16;
175 -- Column number (assume that 2**15 is large enough, see declaration of
176 -- Hostparm.Max_Line_Length, and also processing for -gnatyM in Stylesw)
178 No_Column_Number
: constant Column_Number
:= 0;
179 -- Special value used to indicate no column number
181 subtype Source_Buffer
is Text_Buffer
;
182 -- Type used to store text of a source file . The buffer for the main
183 -- source (the source specified on the command line) has a lower bound
184 -- starting at zero. Subsequent subsidiary sources have lower bounds
185 -- which are one greater than the previous upper bound.
187 subtype Big_Source_Buffer
is Text_Buffer
(0 .. Text_Ptr
'Last);
188 -- This is a virtual type used as the designated type of the access
189 -- type Source_Buffer_Ptr, see Osint.Read_Source_File for details.
191 type Source_Buffer_Ptr
is access all Big_Source_Buffer
;
192 -- Pointer to source buffer. We use virtual origin addressing for
193 -- source buffers, with thin pointers. The pointer points to a virtual
194 -- instance of type Big_Source_Buffer, where the actual type is in fact
195 -- of type Source_Buffer. The address is adjusted so that the virtual
196 -- origin addressing works correctly. See Osint.Read_Source_Buffer for
199 subtype Source_Ptr
is Text_Ptr
;
200 -- Type used to represent a source location, which is a subscript of a
201 -- character in the source buffer. As noted above, diffferent source
202 -- buffers have different ranges, so it is possible to tell from a
203 -- Source_Ptr value which source it refers to. Note that negative numbers
204 -- are allowed to accommodate the following special values.
206 No_Location
: constant Source_Ptr
:= -1;
207 -- Value used to indicate no source position set in a node. A test for
208 -- a Source_Ptr value being >= No_Location is the apporoved way to test
209 -- for a standard value that does not include No_Location or any of the
210 -- following special definitions.
212 Standard_Location
: constant Source_Ptr
:= -2;
213 -- Used for all nodes in the representation of package Standard other
214 -- than nodes representing the contents of Standard.ASCII. Note that
215 -- testing for <= Standard_Location tests for both Standard_Location
216 -- and for Standard_ASCII_Location.
218 Standard_ASCII_Location
: constant Source_Ptr
:= -3;
219 -- Used for all nodes in the presentation of package Standard.ASCII
221 System_Location
: constant Source_Ptr
:= -4;
222 -- Used to identify locations of pragmas scanned by Targparm, where we
223 -- know the location is in System, but we don't know exactly what line.
225 First_Source_Ptr
: constant Source_Ptr
:= 0;
226 -- Starting source pointer index value for first source program
228 -------------------------------------
229 -- Range Definitions for Tree Data --
230 -------------------------------------
232 -- The tree has fields that can hold any of the following types:
234 -- Pointers to other tree nodes (type Node_Id)
235 -- List pointers (type List_Id)
236 -- Element list pointers (type Elist_Id)
237 -- Names (type Name_Id)
238 -- Strings (type String_Id)
239 -- Universal integers (type Uint)
240 -- Universal reals (type Ureal)
242 -- In most contexts, the strongly typed interface determines which of
243 -- these types is present. However, there are some situations (involving
244 -- untyped traversals of the tree), where it is convenient to be easily
245 -- able to distinguish these values. The underlying representation in all
246 -- cases is an integer type Union_Id, and we ensure that the range of
247 -- the various possible values for each of the above types is disjoint
248 -- so that this distinction is possible.
250 type Union_Id
is new Int
;
251 -- The type in the tree for a union of possible ID values
253 -- Note: it is also helpful for debugging purposes to make these ranges
254 -- distinct. If a bug leads to misidentification of a value, then it will
255 -- typically result in an out of range value and a Constraint_Error.
257 List_Low_Bound
: constant := -100_000_000
;
258 -- The List_Id values are subscripts into an array of list headers which
259 -- has List_Low_Bound as its lower bound. This value is chosen so that all
260 -- List_Id values are negative, and the value zero is in the range of both
261 -- List_Id and Node_Id values (see further description below).
263 List_High_Bound
: constant := 0;
264 -- Maximum List_Id subscript value. This allows up to 100 million list
265 -- Id values, which is in practice infinite, and there is no need to
266 -- check the range. The range overlaps the node range by one element
267 -- (with value zero), which is used both for the Empty node, and for
268 -- indicating no list. The fact that the same value is used is convenient
269 -- because it means that the default value of Empty applies to both nodes
270 -- and lists, and also is more efficient to test for.
272 Node_Low_Bound
: constant := 0;
273 -- The tree Id values start at zero, because we use zero for Empty (to
274 -- allow a zero test for Empty). Actual tree node subscripts start at 0
275 -- since Empty is a legitimate node value.
277 Node_High_Bound
: constant := 099_999_999
;
278 -- Maximum number of nodes that can be allocated is 100 million, which
279 -- is in practice infinite, and there is no need to check the range.
281 Elist_Low_Bound
: constant := 100_000_000
;
282 -- The Elist_Id values are subscripts into an array of elist headers which
283 -- has Elist_Low_Bound as its lower bound.
285 Elist_High_Bound
: constant := 199_999_999
;
286 -- Maximum Elist_Id subscript value. This allows up to 100 million Elists,
287 -- which is in practice infinite and there is no need to check the range.
289 Elmt_Low_Bound
: constant := 200_000_000
;
290 -- Low bound of element Id values. The use of these values is internal to
291 -- the Elists package, but the definition of the range is included here
292 -- since it must be disjoint from other Id values. The Elmt_Id values are
293 -- subscripts into an array of list elements which has this as lower bound.
295 Elmt_High_Bound
: constant := 299_999_999
;
296 -- Upper bound of Elmt_Id values. This allows up to 100 million element
297 -- list members, which is in practice infinite (no range check needed).
299 Names_Low_Bound
: constant := 300_000_000
;
300 -- Low bound for name Id values
302 Names_High_Bound
: constant := 399_999_999
;
303 -- Maximum number of names that can be allocated is 100 million, which is
304 -- in practice infinite and there is no need to check the range.
306 Strings_Low_Bound
: constant := 400_000_000
;
307 -- Low bound for string Id values
309 Strings_High_Bound
: constant := 499_999_999
;
310 -- Maximum number of strings that can be allocated is 100 million, which
311 -- is in practice infinite and there is no need to check the range.
313 Ureal_Low_Bound
: constant := 500_000_000
;
314 -- Low bound for Ureal values.
316 Ureal_High_Bound
: constant := 599_999_999
;
317 -- Maximum number of Ureal values stored is 100_000_000 which is in
318 -- practice infinite so that no check is required.
320 Uint_Low_Bound
: constant := 600_000_000
;
321 -- Low bound for Uint values.
323 Uint_Table_Start
: constant := 2_000_000_000
;
324 -- Location where table entries for universal integers start (see
325 -- Uintp spec for details of the representation of Uint values).
327 Uint_High_Bound
: constant := 2_099_999_999
;
328 -- The range of Uint values is very large, since a substantial part
329 -- of this range is used to store direct values, see Uintp for details.
331 -- The following subtype definitions are used to provide convenient names
332 -- for membership tests on Int values to see what data type range they
333 -- lie in. Such tests appear only in the lowest level packages.
335 subtype List_Range
is Union_Id
336 range List_Low_Bound
.. List_High_Bound
;
338 subtype Node_Range
is Union_Id
339 range Node_Low_Bound
.. Node_High_Bound
;
341 subtype Elist_Range
is Union_Id
342 range Elist_Low_Bound
.. Elist_High_Bound
;
344 subtype Elmt_Range
is Union_Id
345 range Elmt_Low_Bound
.. Elmt_High_Bound
;
347 subtype Names_Range
is Union_Id
348 range Names_Low_Bound
.. Names_High_Bound
;
350 subtype Strings_Range
is Union_Id
351 range Strings_Low_Bound
.. Strings_High_Bound
;
353 subtype Uint_Range
is Union_Id
354 range Uint_Low_Bound
.. Uint_High_Bound
;
356 subtype Ureal_Range
is Union_Id
357 range Ureal_Low_Bound
.. Ureal_High_Bound
;
359 -----------------------------
360 -- Types for Namet Package --
361 -----------------------------
363 -- Name_Id values are used to identify entries in the names table. Except
364 -- for the special values No_Name, and Error_Name, they are subscript
365 -- values for the Names table defined in package Namet.
367 -- Note that with only a few exceptions, which are clearly documented, the
368 -- type Name_Id should be regarded as a private type. In particular it is
369 -- never appropriate to perform arithmetic operations using this type.
371 type Name_Id
is range Names_Low_Bound
.. Names_High_Bound
;
372 for Name_Id
'Size use 32;
373 -- Type used to identify entries in the names table
375 No_Name
: constant Name_Id
:= Names_Low_Bound
;
376 -- The special Name_Id value No_Name is used in the parser to indicate
377 -- a situation where no name is present (e.g. on a loop or block).
379 Error_Name
: constant Name_Id
:= Names_Low_Bound
+ 1;
380 -- The special Name_Id value Error_Name is used in the parser to
381 -- indicate that some kind of error was encountered in scanning out
382 -- the relevant name, so it does not have a representable label.
384 subtype Error_Name_Or_No_Name
is Name_Id
range No_Name
.. Error_Name
;
385 -- Used to test for either error name or no name
387 First_Name_Id
: constant Name_Id
:= Names_Low_Bound
+ 2;
388 -- Subscript of first entry in names table
390 ----------------------------
391 -- Types for Atree Package --
392 ----------------------------
394 -- Node_Id values are used to identify nodes in the tree. They are
395 -- subscripts into the Node table declared in package Tree. Note that
396 -- the special values Empty and Error are subscripts into this table,
397 -- See package Atree for further details.
399 type Node_Id
is range Node_Low_Bound
.. Node_High_Bound
;
400 -- Type used to identify nodes in the tree
402 subtype Entity_Id
is Node_Id
;
403 -- A synonym for node types, used in the entity package to refer to
404 -- nodes that are entities (i.e. nodes with an Nkind of N_Defining_xxx)
405 -- All such nodes are extended nodes and these are the only extended
406 -- nodes, so that in practice entity and extended nodes are synonymous.
408 subtype Node_Or_Entity_Id
is Node_Id
;
409 -- A synonym for node types, used in cases where a given value may be used
410 -- to represent either a node or an entity. We like to minimize such uses
411 -- for obvious reasons of logical type consistency, but where such uses
412 -- occur, they should be documented by use of this type.
414 Empty
: constant Node_Id
:= Node_Low_Bound
;
415 -- Used to indicate null node. A node is actually allocated with this
416 -- Id value, so that Nkind (Empty) = N_Empty. Note that Node_Low_Bound
417 -- is zero, so Empty = No_List = zero.
419 Empty_List_Or_Node
: constant := 0;
420 -- This constant is used in situations (e.g. initializing empty fields)
421 -- where the value set will be used to represent either an empty node
422 -- or a non-existent list, depending on the context.
424 Error
: constant Node_Id
:= Node_Low_Bound
+ 1;
425 -- Used to indicate that there was an error in the source program. A node
426 -- is actually allocated at this address, so that Nkind (Error) = N_Error.
428 Empty_Or_Error
: constant Node_Id
:= Error
;
429 -- Since Empty and Error are the first two Node_Id values, the test for
430 -- N <= Empty_Or_Error tests to see if N is Empty or Error. This definition
431 -- provides convenient self-documentation for such tests.
433 First_Node_Id
: constant Node_Id
:= Node_Low_Bound
;
434 -- Subscript of first allocated node. Note that Empty and Error are both
435 -- allocated nodes, whose Nkind fields can be accessed without error.
437 ------------------------------
438 -- Types for Nlists Package --
439 ------------------------------
441 -- List_Id values are used to identify node lists in the tree. They are
442 -- subscripts into the Lists table declared in package Tree. Note that
443 -- the special value Error_List is a subscript in this table, but the
444 -- value No_List is *not* a valid subscript, and any attempt to apply
445 -- list operations to No_List will cause a (detected) error.
447 type List_Id
is range List_Low_Bound
.. List_High_Bound
;
448 -- Type used to identify a node list
450 No_List
: constant List_Id
:= List_High_Bound
;
451 -- Used to indicate absence of a list. Note that the value is zero, which
452 -- is the same as Empty, which is helpful in intializing nodes where a
453 -- value of zero can represent either an empty node or an empty list.
455 Error_List
: constant List_Id
:= List_Low_Bound
;
456 -- Used to indicate that there was an error in the source program in a
457 -- context which would normally require a list. This node appears to be
458 -- an empty list to the list operations (a null list is actually allocated
459 -- which has this Id value).
461 First_List_Id
: constant List_Id
:= Error_List
;
462 -- Subscript of first allocated list header
464 ------------------------------
465 -- Types for Elists Package --
466 ------------------------------
468 -- Element list Id values are used to identify element lists stored in
469 -- the tree (see package Tree for further details). They are formed by
470 -- adding a bias (Element_List_Bias) to subscript values in the same
471 -- array that is used for node list headers.
473 type Elist_Id
is range Elist_Low_Bound
.. Elist_High_Bound
;
474 -- Type used to identify an element list (Elist header table subscript)
476 No_Elist
: constant Elist_Id
:= Elist_Low_Bound
;
477 -- Used to indicate absense of an element list. Note that this is not
478 -- an actual Elist header, so element list operations on this value
481 First_Elist_Id
: constant Elist_Id
:= No_Elist
+ 1;
482 -- Subscript of first allocated Elist header.
484 -- Element Id values are used to identify individual elements of an
485 -- element list (see package Elists for further details).
487 type Elmt_Id
is range Elmt_Low_Bound
.. Elmt_High_Bound
;
488 -- Type used to identify an element list
490 No_Elmt
: constant Elmt_Id
:= Elmt_Low_Bound
;
491 -- Used to represent empty element
493 First_Elmt_Id
: constant Elmt_Id
:= No_Elmt
+ 1;
494 -- Subscript of first allocated Elmt table entry
496 -------------------------------
497 -- Types for Stringt Package --
498 -------------------------------
500 -- String_Id values are used to identify entries in the strings table.
501 -- They are subscripts into the strings table defined in package Strings.
503 -- Note that with only a few exceptions, which are clearly documented, the
504 -- type String_Id should be regarded as a private type. In particular it is
505 -- never appropriate to perform arithmetic operations using this type.
507 type String_Id
is range Strings_Low_Bound
.. Strings_High_Bound
;
508 -- Type used to identify entries in the strings table
510 No_String
: constant String_Id
:= Strings_Low_Bound
;
511 -- Used to indicate missing string Id. Note that the value zero is used
512 -- to indicate a missing data value for all the Int types in this section.
514 First_String_Id
: constant String_Id
:= No_String
+ 1;
515 -- First subscript allocated in string table
517 -------------------------
518 -- Character Code Type --
519 -------------------------
521 -- The type Char is used for character data internally in the compiler,
522 -- but character codes in the source are represented by the Char_Code
523 -- type. Each character literal in the source is interpreted as being one
524 -- of the 16#8000_0000 possible Wide_Wide_Character codes, and a unique
525 -- Integer Value is assigned, corresponding to the UTF_32 value, which
526 -- also correspondds to the POS value in the Wide_Wide_Character type,
527 -- and also corresponds to the POS value in the Wide_Character and
528 -- Character types for values that are in appropriate range. String
529 -- literals are similarly interpreted as a sequence of such codes.
531 type Char_Code_Base
is mod 2 ** 32;
532 for Char_Code_Base
'Size use 32;
534 subtype Char_Code
is Char_Code_Base
range 0 .. 16#
7FFF_FFFF#
;
535 for Char_Code
'Value_Size use 32;
536 for Char_Code
'Object_Size use 32;
538 function Get_Char_Code
(C
: Character) return Char_Code
;
539 pragma Inline
(Get_Char_Code
);
540 -- Function to obtain internal character code from source character. For
541 -- the moment, the internal character code is simply the Pos value of the
542 -- input source character, but we provide this interface for possible
543 -- later support of alternative character sets.
545 function In_Character_Range
(C
: Char_Code
) return Boolean;
546 pragma Inline
(In_Character_Range
);
547 -- Determines if the given character code is in range of type Character,
548 -- and if so, returns True. If not, returns False.
550 function In_Wide_Character_Range
(C
: Char_Code
) return Boolean;
551 pragma Inline
(In_Wide_Character_Range
);
552 -- Determines if the given character code is in range of the type
553 -- Wide_Character, and if so, returns True. If not, returns False.
555 function Get_Character
(C
: Char_Code
) return Character;
556 pragma Inline
(Get_Character
);
557 -- For a character C that is in Character range (see above function), this
558 -- function returns the corresponding Character value. It is an error to
559 -- call Get_Character if C is not in C haracter range
561 function Get_Wide_Character
(C
: Char_Code
) return Wide_Character;
562 -- For a character C that is in Wide_Character range (see above function),
563 -- this function returns the corresponding Wide_Character value. It is an
564 -- error to call Get_Wide_Character if C is not in Wide_Character range.
566 ---------------------------------------
567 -- Types used for Library Management --
568 ---------------------------------------
570 type Unit_Number_Type
is new Int
;
571 -- Unit number. The main source is unit 0, and subsidiary sources have
572 -- non-zero numbers starting with 1. Unit numbers are used to index the
573 -- file table in Lib.
575 Main_Unit
: constant Unit_Number_Type
:= 0;
576 -- Unit number value for main unit
578 No_Unit
: constant Unit_Number_Type
:= -1;
579 -- Special value used to signal no unit
581 type Source_File_Index
is new Int
range -1 .. Int
'Last;
582 -- Type used to index the source file table (see package Sinput)
584 Internal_Source_File
: constant Source_File_Index
:=
585 Source_File_Index
'First;
586 -- Value used to indicate the buffer for the source-code-like strings
587 -- internally created withing the compiler (see package Sinput)
589 No_Source_File
: constant Source_File_Index
:= 0;
590 -- Value used to indicate no source file present
592 subtype File_Name_Type
is Name_Id
;
593 -- File names are stored in the names table and this synonym is used to
594 -- indicate that a Name_Id value is being used to hold a simple file
595 -- name (which does not include any directory information).
597 No_File
: constant File_Name_Type
:= File_Name_Type
(No_Name
);
598 -- Constant used to indicate no file found
600 subtype Unit_Name_Type
is Name_Id
;
601 -- Unit names are stored in the names table and this synonym is used to
602 -- indicate that a Name_Id value is being used to hold a unit name.
604 -----------------------------------
605 -- Representation of Time Stamps --
606 -----------------------------------
608 -- All compiled units are marked with a time stamp which is derived from
609 -- the source file (we assume that the host system has the concept of a
610 -- file time stamp which is modified when a file is modified). These
611 -- time stamps are used to ensure consistency of the set of units that
612 -- constitutes a library. Time stamps are 12 character strings with
613 -- with the following format:
618 -- MM month (2 digits 01-12)
619 -- DD day (2 digits 01-31)
620 -- HH hour (2 digits 00-23)
621 -- MM minutes (2 digits 00-59)
622 -- SS seconds (2 digits 00-59)
624 -- In the case of Unix systems (and other systems which keep the time in
625 -- GMT), the time stamp is the GMT time of the file, not the local time.
626 -- This solves problems in using libraries across networks with clients
627 -- spread across multiple time-zones.
629 Time_Stamp_Length
: constant := 14;
630 -- Length of time stamp value
632 subtype Time_Stamp_Index
is Natural range 1 .. Time_Stamp_Length
;
633 type Time_Stamp_Type
is new String (Time_Stamp_Index
);
634 -- Type used to represent time stamp
636 Empty_Time_Stamp
: constant Time_Stamp_Type
:= (others => ' ');
637 -- Type used to represent an empty or missing time stamp. Looks less
638 -- than any real time stamp if two time stamps are compared. Note that
639 -- although this is not a private type, clients should not rely on the
640 -- exact way in which this string is represented, and instead should
641 -- use the subprograms below.
643 Dummy_Time_Stamp
: constant Time_Stamp_Type
:= (others => '0');
644 -- This is used for dummy time stamp values used in the D lines for
645 -- non-existant files, and is intended to be an impossible value.
647 function "=" (Left
, Right
: Time_Stamp_Type
) return Boolean;
648 function "<=" (Left
, Right
: Time_Stamp_Type
) return Boolean;
649 function ">=" (Left
, Right
: Time_Stamp_Type
) return Boolean;
650 function "<" (Left
, Right
: Time_Stamp_Type
) return Boolean;
651 function ">" (Left
, Right
: Time_Stamp_Type
) return Boolean;
652 -- Comparison functions on time stamps. Note that two time stamps
653 -- are defined as being equal if they have the same day/month/year
654 -- and the hour/minutes/seconds values are within 2 seconds of one
655 -- another. This deals with rounding effects in library file time
656 -- stamps caused by copying operations during installation. We have
657 -- particularly noticed that WinNT seems susceptible to such changes.
658 -- Note: the Empty_Time_Stamp value looks equal to itself, and less
659 -- than any non-empty time stamp value.
661 procedure Split_Time_Stamp
662 (TS
: Time_Stamp_Type
;
669 -- Given a time stamp, decompose it into its components
671 procedure Make_Time_Stamp
678 TS
: out Time_Stamp_Type
);
679 -- Given the components of a time stamp, initialize the value
681 -----------------------------------------------
682 -- Types used for Pragma Suppress Management --
683 -----------------------------------------------
699 -- The following record contains an entry for each recognized check name
700 -- for pragma Suppress. It is used to represent current settings of scope
701 -- based suppress actions from pragma Suppress or command line settings.
703 type Suppress_Array
is
704 array (Check_Id
range Access_Check
.. Tag_Check
) of Boolean;
705 pragma Pack
(Suppress_Array
);
707 -- To add a new check type to GNAT, the following steps are required:
709 -- 1. Add an entry to Snames spec and body for the new name
710 -- 2. Add an entry to the definition of Check_Id above
711 -- 3. Add a new function to Checks to handle the new check test
712 -- 4. Add a new Do_xxx_Check flag to Sinfo (if required)
713 -- 5. Add appropriate checks for the new test
715 -----------------------------------
716 -- Global Exception Declarations --
717 -----------------------------------
719 -- This section contains declarations of exceptions that are used
720 -- throughout the compiler.
722 Unrecoverable_Error
: exception;
723 -- This exception is raised to immediately terminate the compilation
724 -- of the current source program. Used in situations where things are
725 -- bad enough that it doesn't seem worth continuing (e.g. max errors
726 -- reached, or a required file is not found). Also raised when the
727 -- compiler finds itself in trouble after an error (see Comperr).
729 ---------------------------------
730 -- Parameter Mechanism Control --
731 ---------------------------------
733 -- Function and parameter entities have a field that records the
734 -- passing mechanism. See specification of Sem_Mech for full details.
735 -- The following subtype is used to represent values of this type:
737 subtype Mechanism_Type
is Int
range -10 .. Int
'Last;
738 -- Type used to represent a mechanism value. This is a subtype rather
739 -- than a type to avoid some annoying processing problems with certain
740 -- routines in Einfo (processing them to create the corresponding C).
742 ------------------------------
743 -- Run-Time Exception Codes --
744 ------------------------------
746 -- When the code generator generates a run-time exception, it provides
747 -- a reason code which is one of the following. This reason code is used
748 -- to select the appropriate run-time routine to be called, determining
749 -- both the exception to be raised, and the message text to be added.
751 -- The prefix CE/PE/SE indicates the exception to be raised
752 -- CE = Constraint_Error
753 -- PE = Program_Error
754 -- SE = Storage_Error
756 -- The remaining part of the name indicates the message text to be added,
757 -- where all letters are lower case, and underscores are converted to
758 -- spaces (for example CE_Invalid_Data adds the text "invalid data").
760 -- To add a new code, you need to do the following:
762 -- 1. Modify the type and subtype declarations below appropriately,
763 -- keeping things in alphabetical order.
765 -- 2. Modify the corresponding definitions in types.h, including
766 -- the definition of last_reason_code.
768 -- 3. Add a new routine in Ada.Exceptions with the appropriate call
769 -- and static string constant
771 type RT_Exception_Code
is (
772 CE_Access_Check_Failed
,
773 CE_Access_Parameter_Is_Null
,
774 CE_Discriminant_Check_Failed
,
777 CE_Index_Check_Failed
,
779 CE_Length_Check_Failed
,
781 CE_Overflow_Check_Failed
,
782 CE_Partition_Check_Failed
,
783 CE_Range_Check_Failed
,
786 PE_Access_Before_Elaboration
,
787 PE_Accessibility_Check_Failed
,
788 PE_All_Guards_Closed
,
789 PE_Duplicated_Entry_Address
,
791 PE_Finalize_Raised_Exception
,
792 PE_Misaligned_Address_Value
,
794 PE_Overlaid_Controlled_Object
,
795 PE_Potentially_Blocking_Operation
,
796 PE_Stubbed_Subprogram_Called
,
797 PE_Unchecked_Union_Restriction
,
798 PE_Illegal_RACW_E_4_18
,
800 SE_Empty_Storage_Pool
,
802 SE_Infinite_Recursion
,
804 SE_Restriction_Violation
);
806 subtype RT_CE_Exceptions
is RT_Exception_Code
range
807 CE_Access_Check_Failed
..
810 subtype RT_PE_Exceptions
is RT_Exception_Code
range
811 PE_Access_Before_Elaboration
..
812 PE_Illegal_RACW_E_4_18
;
814 subtype RT_SE_Exceptions
is RT_Exception_Code
range
815 SE_Empty_Storage_Pool
..
816 SE_Restriction_Violation
;