1 # SPDX-License-Identifier: GPL-3.0-or-later
2 # GCC target-specific configuration file.
3 # Copyright (C) 1997-2022 Free Software Foundation, Inc.
5 #This file is part of GCC.
7 #GCC is free software; you can redistribute it and/or modify it under
8 #the terms of the GNU General Public License as published by the Free
9 #Software Foundation; either version 3, or (at your option) any later
12 #GCC is distributed in the hope that it will be useful, but WITHOUT
13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 #FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 #You should have received a copy of the GNU General Public License
18 #along with GCC; see the file COPYING3. If not see
19 #<http://www.gnu.org/licenses/>.
21 # This is the GCC target-specific configuration file
22 # where a configuration type is mapped to different system-specific
23 # definitions and files. This is invoked by the autoconf-generated
24 # configure script. Putting it in a separate shell file lets us skip
25 # running autoconf when modifying target-specific information.
27 # When you change the cases in the OS or target switches, consider
28 # updating ../libgcc/config.host also.
30 # This file switches on the shell variable ${target}, and also uses the
31 # following shell variables:
33 # with_* Various variables as set by configure.
35 # enable_threads Either the name, yes or no depending on whether
36 # threads support was requested.
38 # default_use_cxa_atexit
39 # The default value for the $enable___cxa_atexit
40 # variable. enable___cxa_atexit needs to be set to
41 # "yes" for the correct operation of C++ destructors
42 # but it relies upon the presence of a non-standard C
43 # library function called __cxa_atexit.
44 # Since not all C libraries provide __cxa_atexit the
45 # default value of $default_use_cxa_atexit is set to
46 # "no" except for targets which are known to be OK.
48 # default_gnu_indirect_function
49 # The default value for the $enable_gnu_indirect_function
50 # variable. enable_gnu_indirect_function relies
51 # upon the presence of a non-standard gnu ifunc support
52 # in the assembler, linker and dynamic linker.
53 # Since not all libraries provide the dynamic linking
54 # support, the default value of
55 # $default_gnu_indirect_function is set to
56 # "no" except for targets which are known to be OK.
58 # gas_flag Either yes or no depending on whether GNU as was
61 # gnu_ld_flag Either yes or no depending on whether GNU ld was
64 # This file sets the following shell variables for use by the
65 # autoconf-generated configure script:
67 # cpu_type The name of the cpu, if different from the first
68 # chunk of the canonical target name.
70 # tm_defines List of target macros to define for all compilations.
72 # tm_file A list of target macro files, if different from
73 # "$cpu_type/$cpu_type.h". Usually it's constructed
74 # per target in a way like this:
75 # tm_file="${tm_file} dbxelf.h elfos.h ${cpu_type.h}/elf.h"
76 # Note that the preferred order is:
77 # - specific target header "${cpu_type}/${cpu_type.h}"
78 # - generic headers like dbxelf.h elfos.h, etc.
79 # - specializing target headers like ${cpu_type.h}/elf.h
80 # This helps to keep OS specific stuff out of the CPU
81 # defining header ${cpu_type}/${cpu_type.h}.
83 # It is possible to include automatically-generated
84 # build-directory files by prefixing them with "./".
85 # All other files should relative to $srcdir/config.
87 # tm_p_file Location of file with declarations for functions
90 # tm_d_file A list of headers with definitions of target hook
91 # macros for the D compiler.
93 # out_file The name of the machine description C support
94 # file, if different from "$cpu_type/$cpu_type.c".
96 # common_out_file The name of the source file for code shared between
97 # the compiler proper and the driver.
99 # md_file The name of the machine-description file, if
100 # different from "$cpu_type/$cpu_type.md".
102 # tmake_file A list of machine-description-specific
103 # makefile-fragments, if different from
104 # "$cpu_type/t-$cpu_type".
106 # extra_modes The name of the file containing a list of extra
107 # machine modes, if necessary and different from
108 # "$cpu_type/$cpu_type-modes.def".
110 # extra_objs List of extra objects that should be linked into
111 # the compiler proper (cc1, cc1obj, cc1plus)
112 # depending on target.
114 # extra_gcc_objs List of extra objects that should be linked into
115 # the compiler driver (gcc) depending on target.
117 # extra_headers List of used header files from the directory
118 # config/${cpu_type}.
120 # user_headers_inc_next_pre
121 # List of header file names of internal gcc header
122 # files, which should be prefixed by an include_next.
123 # user_headers_inc_next_post
124 # List of header file names of internal gcc header
125 # files, which should be postfixed by an include_next.
126 # use_gcc_tgmath If set, add tgmath.h to the list of used header
129 # use_gcc_stdint If "wrap", install a version of stdint.h that
130 # wraps the system's copy for hosted compilations;
131 # if "provide", provide a version of systems without
132 # such a system header; otherwise "none", do not
133 # provide such a header at all.
135 # extra_programs List of extra executables compiled for this target
136 # machine, used when linking.
138 # extra_options List of target-dependent .opt files.
140 # c_target_objs List of extra target-dependent objects that be
141 # linked into the C compiler only.
143 # cxx_target_objs List of extra target-dependent objects that be
144 # linked into the C++ compiler only.
146 # d_target_objs List of extra target-dependent objects that be
147 # linked into the D compiler only.
149 # fortran_target_objs List of extra target-dependent objects that be
150 # linked into the fortran compiler only.
152 # target_gtfiles List of extra source files with type information.
154 # xm_defines List of macros to define when compiling for the
157 # xm_file List of files to include when compiling for the
160 # use_collect2 Set to yes or no, depending on whether collect2
163 # target_cpu_default Set to override the default target model.
165 # gdb_needs_out_file_path
166 # Set to yes if gdb needs a dir command with
167 # `dirname $out_file`.
169 # thread_file Set to control which thread package to use.
171 # gas Set to yes or no depending on whether the target
172 # system normally uses GNU as.
174 # configure_default_options
175 # Set to an initializer for configure_default_options
176 # in configargs.h, based on --with-cpu et cetera.
178 # native_system_header_dir
179 # Where system header files are found for this
180 # target. This defaults to /usr/include. If
181 # the --with-sysroot configure option or the
182 # --sysroot command line option is used this
183 # will be relative to the sysroot.
184 # target_type_format_char
185 # The default character to be used for formatting
187 # .type symbol_name, ${t_t_f_c}<property>
190 # The following variables are used in each case-construct to build up the
191 # outgoing variables:
193 # gnu_ld Set to yes or no depending on whether the target
194 # system normally uses GNU ld.
196 # target_has_targetcm Set to yes or no depending on whether the target
197 # has its own definition of targetcm.
199 # target_has_targetm_common Set to yes or no depending on whether the
200 # target has its own definition of targetm_common.
202 # target_has_targetdm Set to yes or no depending on whether the target
203 # has its own definition of targetdm.
209 user_headers_inc_next_pre=
210 user_headers_inc_next_post=
221 target_has_targetcm=no
222 target_has_targetm_common=yes
223 target_has_targetdm=no
226 # Set this to force installation and use of collect2.
228 # Set this to override the default target model.
230 # Set this if gdb needs a dir command with `dirname $out_file`
231 gdb_needs_out_file_path=
232 # Set this to control which thread package will be used.
234 # Reinitialize these from the flag values every loop pass, since some
235 # configure entries modify them.
237 gnu_ld="$gnu_ld_flag"
238 default_use_cxa_atexit=no
239 default_gnu_indirect_function=no
242 native_system_header_dir=/usr/include
243 target_type_format_char='@'
245 # Don't carry these over build->host->target. Please.
249 # Obsolete configurations.
253 | hppa[12]*-*-hpux10* \
254 | hppa[12]*-*-hpux11* \
257 if test "x$enable_obsolete" != xyes; then
258 echo "*** Configuration ${target} is obsolete." >&2
259 echo "*** Specify --enable-obsolete to build it anyway." >&2
260 echo "*** Support will be REMOVED in the next major release of GCC," >&2
261 echo "*** unless a maintainer comes forward." >&2
266 # Unsupported targets list. Do not put an entry in this list unless
267 # it would otherwise be caught by a more permissive pattern. The list
268 # should be in alphabetical order.
270 # Avoid special cases that are not obsolete
281 | i[34567]86-go32-* \
282 | i[34567]86-*-go32* \
286 | m68k-*-uclinuxoldabi* \
287 | mips64orion*-*-rtems* \
289 | powerpc*-*-linux*paired* \
291 | sparc-hal-solaris2* \
294 | *-*-freebsd[12] | *-*-freebsd[1234].* \
295 | *-*-freebsd*aout* \
303 | *-*-solaris2.[0-9] \
304 | *-*-solaris2.[0-9].* \
309 echo "*** Configuration ${target} not supported" 1>&2
314 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
315 # updated in each machine entry. Also set default extra_headers for some
318 cpu_type=`echo ${target} | sed 's/-.*$//'`
323 tmake_file=m32c/t-m32c
324 target_has_targetm_common=no
328 extra_headers="arm_fp16.h arm_neon.h arm_bf16.h arm_acle.h arm_sve.h"
329 c_target_objs="aarch64-c.o"
330 cxx_target_objs="aarch64-c.o"
331 d_target_objs="aarch64-d.o"
332 extra_objs="aarch64-builtins.o aarch-common.o aarch64-sve-builtins.o aarch64-sve-builtins-shapes.o aarch64-sve-builtins-base.o aarch64-sve-builtins-sve2.o cortex-a57-fma-steering.o aarch64-speculation.o falkor-tag-collision-avoidance.o aarch64-bti-insert.o aarch64-cc-fusion.o"
333 target_gtfiles="\$(srcdir)/config/aarch64/aarch64-builtins.cc \$(srcdir)/config/aarch64/aarch64-sve-builtins.h \$(srcdir)/config/aarch64/aarch64-sve-builtins.cc"
334 target_has_targetm_common=yes
338 extra_options="${extra_options} g.opt"
349 c_target_objs="arc-c.o"
350 cxx_target_objs="arc-c.o"
351 extra_options="${extra_options} arc/arc-tables.opt g.opt"
352 extra_headers="arc-simd.h"
356 extra_objs="arm-builtins.o arm-mve-builtins.o aarch-common.o"
357 extra_headers="mmintrin.h arm_neon.h arm_acle.h arm_fp16.h arm_cmse.h arm_bf16.h arm_mve_types.h arm_mve.h arm_cde.h"
358 target_type_format_char='%'
359 c_target_objs="arm-c.o"
360 cxx_target_objs="arm-c.o"
361 d_target_objs="arm-d.o"
362 extra_options="${extra_options} arm/arm-tables.opt"
363 target_gtfiles="\$(srcdir)/config/arm/arm-builtins.cc \$(srcdir)/config/arm/arm-mve-builtins.h \$(srcdir)/config/arm/arm-mve-builtins.cc"
367 c_target_objs="avr-c.o"
368 cxx_target_objs="avr-c.o"
377 extra_options="${extra_options} g.opt"
380 target_has_targetm_common=no
382 moxie*) cpu_type=moxie
383 target_has_targetm_common=no
387 extra_headers=math-68881.h
388 extra_options="${extra_options} m68k/m68k-tables.opt"
390 i[34567]86-*-* | x86_64-*-*)
392 c_target_objs="i386-c.o"
393 cxx_target_objs="i386-c.o"
394 d_target_objs="i386-d.o"
395 extra_objs="x86-tune-sched.o x86-tune-sched-bd.o x86-tune-sched-atom.o x86-tune-sched-core.o i386-options.o i386-builtins.o i386-expand.o i386-features.o"
396 target_gtfiles="\$(srcdir)/config/i386/i386-builtins.cc \$(srcdir)/config/i386/i386-expand.cc \$(srcdir)/config/i386/i386-options.cc"
397 extra_options="${extra_options} fused-madd.opt"
398 extra_headers="cpuid.h mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h
399 pmmintrin.h tmmintrin.h ammintrin.h smmintrin.h
400 nmmintrin.h bmmintrin.h fma4intrin.h wmmintrin.h
401 immintrin.h x86intrin.h avxintrin.h xopintrin.h
402 ia32intrin.h cross-stdarg.h lwpintrin.h popcntintrin.h
403 lzcntintrin.h bmiintrin.h bmi2intrin.h tbmintrin.h
404 avx2intrin.h avx512fintrin.h fmaintrin.h f16cintrin.h
405 rtmintrin.h xtestintrin.h rdseedintrin.h prfchwintrin.h
406 adxintrin.h fxsrintrin.h xsaveintrin.h xsaveoptintrin.h
407 avx512cdintrin.h avx512erintrin.h avx512pfintrin.h
408 shaintrin.h clflushoptintrin.h xsavecintrin.h
409 xsavesintrin.h avx512dqintrin.h avx512bwintrin.h
410 avx512vlintrin.h avx512vlbwintrin.h avx512vldqintrin.h
411 avx512ifmaintrin.h avx512ifmavlintrin.h avx512vbmiintrin.h
412 avx512vbmivlintrin.h avx5124fmapsintrin.h avx5124vnniwintrin.h
413 avx512vpopcntdqintrin.h clwbintrin.h mwaitxintrin.h
414 clzerointrin.h pkuintrin.h sgxintrin.h cetintrin.h
415 gfniintrin.h cet.h avx512vbmi2intrin.h
416 avx512vbmi2vlintrin.h avx512vnniintrin.h
417 avx512vnnivlintrin.h vaesintrin.h vpclmulqdqintrin.h
418 avx512vpopcntdqvlintrin.h avx512bitalgintrin.h
419 pconfigintrin.h wbnoinvdintrin.h movdirintrin.h
420 waitpkgintrin.h cldemoteintrin.h avx512bf16vlintrin.h
421 avx512bf16intrin.h enqcmdintrin.h serializeintrin.h
422 avx512vp2intersectintrin.h avx512vp2intersectvlintrin.h
423 tsxldtrkintrin.h amxtileintrin.h amxint8intrin.h
424 amxbf16intrin.h x86gprintrin.h uintrintrin.h
425 hresetintrin.h keylockerintrin.h avxvnniintrin.h
426 mwaitintrin.h avx512fp16intrin.h avx512fp16vlintrin.h"
429 extra_headers=ia64intrin.h
430 extra_options="${extra_options} g.opt fused-madd.opt"
436 extra_options="${extra_options} g.opt"
440 extra_options="${extra_options} g.opt"
443 extra_headers=math-68881.h
444 extra_options="${extra_options} m68k/m68k-tables.opt"
448 extra_options="${extra_options} g.opt"
452 d_target_objs="mips-d.o"
453 extra_headers="loongson.h loongson-mmiintrin.h msa.h"
454 extra_objs="frame-header-opt.o"
455 extra_options="${extra_options} g.opt fused-madd.opt mips/mips-tables.opt"
459 extra_headers="larchintrin.h"
460 extra_objs="loongarch-c.o loongarch-builtins.o loongarch-cpu.o loongarch-opts.o loongarch-def.o"
461 extra_gcc_objs="loongarch-driver.o loongarch-cpu.o loongarch-opts.o loongarch-def.o"
462 extra_options="${extra_options} g.opt fused-madd.opt"
466 extra_headers="nds32_intrinsic.h nds32_isr.h nds32_init.inc"
469 extra_options="${extra_options} nds32/nds32-linux.opt"
472 extra_options="${extra_options} nds32/nds32-elf.opt"
477 extra_objs="nds32-cost.o nds32-intrinsic.o nds32-isr.o nds32-md-auxiliary.o nds32-pipelines-auxiliary.o nds32-predicates.o nds32-memory-manipulation.o nds32-fp-as-gp.o nds32-relax-opt.o nds32-utils.o"
481 extra_options="${extra_options} g.opt"
485 c_target_objs="nvptx-c.o"
486 cxx_target_objs="nvptx-c.o"
487 extra_options="${extra_options} nvptx/nvptx-gen.opt"
494 extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
495 extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
496 extra_objs="${extra_objs} rs6000-builtins.o rs6000-builtin.o"
497 extra_headers="ppc-asm.h altivec.h htmintrin.h htmxlintrin.h"
498 extra_headers="${extra_headers} bmi2intrin.h bmiintrin.h"
499 extra_headers="${extra_headers} xmmintrin.h mm_malloc.h emmintrin.h"
500 extra_headers="${extra_headers} mmintrin.h x86intrin.h"
501 extra_headers="${extra_headers} pmmintrin.h tmmintrin.h smmintrin.h"
502 extra_headers="${extra_headers} nmmintrin.h immintrin.h x86gprintrin.h"
503 extra_headers="${extra_headers} ppu_intrinsics.h spu2vmx.h vec_types.h si2vmx.h"
504 extra_headers="${extra_headers} amo.h"
506 xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456789]|xpower10|xpower6x|xrs64a|xcell|xa2|xe500mc64|xe5500|xe6500)
510 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
511 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc"
512 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc"
513 target_gtfiles="$target_gtfiles ./rs6000-builtins.h"
520 extra_objs="riscv-builtins.o riscv-c.o riscv-sr.o riscv-shorten-memrefs.o"
521 d_target_objs="riscv-d.o"
524 extra_options="${extra_options} g.opt fused-madd.opt rs6000/rs6000-tables.opt"
525 extra_objs="rs6000-string.o rs6000-p8swap.o rs6000-logue.o"
526 extra_objs="${extra_objs} rs6000-call.o rs6000-pcrel-opt.o"
527 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-logue.cc \$(srcdir)/config/rs6000/rs6000-call.cc"
528 target_gtfiles="$target_gtfiles \$(srcdir)/config/rs6000/rs6000-pcrel-opt.cc"
532 c_target_objs="sparc-c.o"
533 cxx_target_objs="sparc-c.o"
534 d_target_objs="sparc-d.o"
535 extra_headers="visintrin.h"
539 d_target_objs="s390-d.o"
540 extra_options="${extra_options} fused-madd.opt"
541 extra_headers="s390intrin.h htmintrin.h htmxlintrin.h vecintrin.h"
543 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
544 sh[123456789lbe]*-*-* | sh-*-*)
546 extra_options="${extra_options} fused-madd.opt"
547 extra_objs="${extra_objs} sh_treg_combine.o sh-mem.o sh_optimize_sett_clrt.o"
554 extra_headers="c6x_intrinsics.h"
555 extra_options="${extra_options} c6x/c6x-tables.opt"
558 extra_options="${extra_options} fused-madd.opt"
568 tm_file=${cpu_type}/${cpu_type}.h
569 tm_d_file=${cpu_type}/${cpu_type}.h
570 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
572 tm_p_file=${cpu_type}/${cpu_type}-protos.h
573 tm_d_file="${tm_d_file} ${cpu_type}/${cpu_type}-protos.h"
577 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
579 extra_modes=${cpu_type}/${cpu_type}-modes.def
581 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
583 extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
588 tm_p_file="${tm_p_file} arm/aarch-common-protos.h"
591 if test "x$with_multilib_list" = xilp32; then
592 tm_file="aarch64/biarchilp32.h ${tm_file}"
594 tm_file="aarch64/biarchlp64.h ${tm_file}"
598 tm_file="aarch64/biarchilp32.h ${tm_file}"
601 tm_file="aarch64/biarchlp64.h ${tm_file}"
604 echo "Unknown ABI used in --with-abi=$with_abi"
609 if test "x$with_abi" != x; then
610 echo "This target does not support --with-abi."
619 if test "x$with_multilib_list" = xmx32; then
620 tm_file="i386/biarchx32.h ${tm_file}"
622 tm_file="i386/biarch64.h ${tm_file}"
626 tm_file="i386/biarch64.h ${tm_file}"
629 tm_file="i386/biarchx32.h ${tm_file}"
632 echo "Unknown ABI used in --with-abi=$with_abi"
637 tm_p_file="arm/arm-flags.h ${tm_p_file} arm/aarch-common-protos.h"
641 # On a.out targets, we need to use collect2.
648 # Common C libraries.
649 tm_defines="$tm_defines LIBC_GLIBC=1 LIBC_UCLIBC=2 LIBC_BIONIC=3 LIBC_MUSL=4"
651 # 32-bit x86 processors supported by --with-arch=. Each processor
652 # MUST be separated by exactly one space.
653 x86_archs="athlon athlon-4 athlon-fx athlon-mp athlon-tbird \
654 athlon-xp k6 k6-2 k6-3 geode c3 c3-2 winchip-c6 winchip2 i386 i486 \
655 i586 i686 pentium pentium-m pentium-mmx pentium2 pentium3 pentium3m \
656 pentium4 pentium4m pentiumpro prescott lakemont samuel-2 nehemiah \
659 # 64-bit x86 processors supported by --with-arch=. Each processor
660 # MUST be separated by exactly one space.
661 x86_64_archs="amdfam10 athlon64 athlon64-sse3 barcelona bdver1 bdver2 \
662 bdver3 bdver4 znver1 znver2 znver3 btver1 btver2 k8 k8-sse3 opteron \
663 opteron-sse3 nocona core2 corei7 corei7-avx core-avx-i core-avx2 atom \
664 slm nehalem westmere sandybridge ivybridge haswell broadwell bonnell \
665 silvermont knl knm skylake-avx512 cannonlake icelake-client icelake-server \
666 skylake goldmont goldmont-plus tremont cascadelake tigerlake cooperlake \
667 sapphirerapids alderlake rocketlake eden-x2 nano nano-1000 nano-2000 nano-3000 \
668 nano-x2 eden-x4 nano-x4 lujiazui x86-64 x86-64-v2 x86-64-v3 x86-64-v4 native"
670 # Additional x86 processors supported by --with-cpu=. Each processor
671 # MUST be separated by exactly one space.
672 x86_cpus="generic intel"
674 # Common parts for widely ported systems.
677 tmake_file="t-darwin "
678 tm_file="${tm_file} darwin.h"
679 tm_d_file="${tm_d_file} tm-dwarf2.h"
680 darwin_os=`echo ${target} | sed 's/.*darwin\([0-9.]*\).*$/\1/'`
681 darwin_maj=`expr "$darwin_os" : '\([0-9]*\).*'`
682 macos_min=`expr "$darwin_os" : '[0-9]*\.\([0-9]*\).*'`
684 if test x"${macos_min}" = x; then
688 # Tools hosted on earlier versions of Darwin constrained all object
689 # alignment to be 2^15 or smaller. From Darwin11 (macOS 10.7) the
690 # alignment of non-common is allowed to be up to 2^28. Note that the
691 #Â larger alignment is permitted when targeting 10.6 from 10.7 so that
692 #Â the constraint only need be applied per host (and only if the host
695 *-*-darwin[4-9]* | *-*-darwin10*)
696 tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=15U"
699 tm_defines="$tm_defines L2_MAX_OFILE_ALIGNMENT=28U"
703 # Darwin 4 to 19 correspond to macOS 10.0 to 10.15
704 *-*-darwin[4-9]* | *-*-darwin1[0-9]*)
705 macos_min=`expr $darwin_maj - 4`
708 # Darwin 20 corresponds to macOS 11, Darwin 21 to macOS 12.
709 macos_maj=`expr $darwin_maj - 9`
714 aarch64) macos_maj=11 ;;
715 x86_64) macos_min=6 ;;
719 *-*-darwin*) tm_defines="$tm_defines DARWIN_USE_KERNEL_VERS" ;;
721 # If configuring a cross-compiler then we will have set some
722 #Â default above, but it is probably not what was intended.
723 echo "Warning: Using ${target} is only suitable for Darwin hosts" 1>&2
724 echo "configure with an explicit target version" 1>&2
729 echo "Error: configuring for an unreleased macOS version ${target}" 1>&2
733 tm_defines="$tm_defines DEF_MIN_OSX_VERSION=\\\"${macos_maj}.${macos_min}\\\""
734 tm_defines="$tm_defines DEF_LD64=\\\"${def_ld64}\\\""
735 tm_file="${tm_file} ${cpu_type}/darwin.h"
736 tm_p_file="${tm_p_file} darwin-protos.h"
737 target_gtfiles="$target_gtfiles \$(srcdir)/config/darwin.cc"
738 extra_options="${extra_options} rpath.opt darwin.opt"
739 c_target_objs="${c_target_objs} darwin-c.o"
740 cxx_target_objs="${cxx_target_objs} darwin-c.o"
741 d_target_objs="${d_target_objs} darwin-d.o"
742 fortran_target_objs="darwin-f.o"
743 target_has_targetcm=yes
744 target_has_targetdm=yes
745 extra_objs="${extra_objs} darwin.o"
746 extra_gcc_objs="darwin-driver.o"
747 default_use_cxa_atexit=yes
749 case ${enable_threads} in
750 "" | yes | posix) thread_file='posix' ;;
756 tmake_file="t-slibgcc"
757 case ${enable_threads} in
762 # Let these non-posix thread selections fall through if requested
765 echo 'Unknown thread configuration for DragonFly BSD'
769 extra_options="$extra_options rpath.opt dragonfly.opt"
770 default_use_cxa_atexit=yes
772 d_target_objs="${d_target_objs} dragonfly-d.o"
773 tmake_file="${tmake_file} t-dragonfly"
774 target_has_targetdm=yes
777 # This is the generic ELF configuration of FreeBSD. Later
778 # machine-specific sections may refine and add to this
781 # Due to tm_file entry ordering issues that vary between cpu
782 # architectures, we only define fbsd_tm_file to allow the
783 # machine-specific section to dictate the final order of all
784 # entries of tm_file with the minor exception that components
785 # of the tm_file set here will always be of the form:
787 # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
789 # The machine-specific section should not tamper with this
790 # ordering but may order all other entries of tm_file as it
791 # pleases around the provided core setting.
794 fbsd_major=`echo ${target} | sed -e 's/.*freebsd//g' | sed -e 's/\..*//g'`
795 if test "$fbsd_major" = ""; then
796 echo "Specify the major version number of the targeted FreeBSD release"
797 echo "like this: --target=amd64-unknown-freebsd10.1"
800 tm_defines="${tm_defines} FBSD_MAJOR=${fbsd_major}"
801 tmake_file="t-slibgcc"
802 case ${enable_threads} in
804 fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
810 echo 'Unknown thread configuration for FreeBSD'
814 fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h freebsd-stdint.h"
815 extra_options="$extra_options rpath.opt freebsd.opt"
820 default_use_cxa_atexit=yes;;
823 d_target_objs="${d_target_objs} freebsd-d.o"
824 tmake_file="${tmake_file} t-freebsd"
825 target_has_targetdm=yes
828 native_system_header_dir=/include
830 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-gnu* | *-*-kopensolaris*-gnu | *-*-uclinuxfdpiceabi)
831 extra_options="$extra_options gnu-user.opt"
834 case ${enable_threads} in
835 "" | yes | posix) thread_file='posix' ;;
837 tmake_file="t-slibgcc"
839 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu)
842 native_system_header_dir=/include
845 # Linux C libraries selection switch: glibc / uclibc / bionic.
846 # uclibc and bionic aren't usable for GNU/Hurd and neither for GNU/k*BSD.
849 tm_p_file="${tm_p_file} linux-protos.h"
850 tmake_file="${tmake_file} t-linux"
851 extra_objs="${extra_objs} linux.o"
852 extra_options="${extra_options} linux.opt"
857 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_BIONIC"
859 *-*-*uclibc* | *-*-uclinuxfdpiceabi)
860 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
863 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_MUSL"
866 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
869 # Assume that glibc or uClibc or Bionic are being used and so __cxa_atexit
871 default_use_cxa_atexit=yes
874 # Enable compilation for Android by default for *android* targets.
877 tm_defines="$tm_defines ANDROID_DEFAULT=1"
880 tm_defines="$tm_defines ANDROID_DEFAULT=0"
883 c_target_objs="${c_target_objs} glibc-c.o"
884 cxx_target_objs="${cxx_target_objs} glibc-c.o"
885 d_target_objs="${d_target_objs} glibc-d.o"
886 tmake_file="${tmake_file} t-glibc"
887 target_has_targetcm=yes
888 target_has_targetdm=yes
890 *-*-*uclibc* | *-*-uclinuxfdpiceabi)
893 # Linux targets always support .init_array.
894 gcc_cv_initfini_array=yes
899 tm_p_file="${tm_p_file} netbsd-protos.h"
900 tmake_file="t-netbsd t-slibgcc"
901 extra_objs="${extra_objs} netbsd.o"
902 d_target_objs="${d_target_objs} netbsd-d.o"
906 case ${enable_threads} in
907 "" | yes | posix) thread_file='posix' ;;
909 nbsd_tm_file="netbsd.h netbsd-stdint.h netbsd-elf.h"
910 default_use_cxa_atexit=yes
911 target_has_targetdm=yes
913 arm*-* | i[34567]86-* | powerpc*-* | sparc*-* | x86_64-*)
914 default_gnu_indirect_function=yes
919 tmake_file="t-openbsd"
920 case ${enable_threads} in
926 *-*-openbsd4.[3-9]|*-*-openbsd[5-9]*)
927 default_use_cxa_atexit=yes
930 d_target_objs="${d_target_objs} openbsd-d.o"
931 target_has_targetdm=yes
936 default_use_cxa_atexit=yes
939 case ${enable_threads} in
940 "" | yes | rtems) thread_file='rtems' ;;
941 posix) thread_file='posix' ;;
944 echo 'Unknown thread configuration for RTEMS'
948 tmake_file="${tmake_file} t-rtems"
949 extra_options="${extra_options} rtems.opt"
950 default_use_cxa_atexit=yes
954 extra_options="$extra_options gnu-user.opt"
956 case ${enable_threads} in
957 "" | yes | posix) thread_file='posix' ;;
959 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC SINGLE_LIBC"
965 # i?86-*-solaris2* needs to insert headers between cpu default and
966 # Solaris 2 specific ones.
967 sol2_tm_file_head="dbxelf.h elfos.h ${cpu_type}/sysv4.h"
968 sol2_tm_file_tail="${cpu_type}/sol2.h sol2.h"
969 sol2_tm_file="${sol2_tm_file_head} ${sol2_tm_file_tail}"
971 *-*-solaris2.1[1-9]*)
972 # __cxa_atexit was introduced in Solaris 11.4.
973 default_use_cxa_atexit=yes
977 if test x$gnu_ld = xyes; then
978 tm_file="usegld.h ${tm_file}"
980 if test x$gas = xyes; then
981 tm_file="usegas.h ${tm_file}"
983 tm_p_file="${tm_p_file} sol2-protos.h"
984 tmake_file="${tmake_file} t-sol2 t-slibgcc"
985 c_target_objs="${c_target_objs} sol2-c.o"
986 cxx_target_objs="${cxx_target_objs} sol2-c.o sol2-cxx.o"
987 d_target_objs="${d_target_objs} sol2-d.o"
988 extra_objs="${extra_objs} sol2.o sol2-stubs.o"
989 extra_options="${extra_options} sol2.opt"
990 case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
991 "":yes:* | yes:yes:* )
995 target_has_targetdm=yes
998 extra_options="${extra_options} vms/vms.opt"
1000 tmake_file="vms/t-vms t-slibgcc"
1002 target_gtfiles="$target_gtfiles \$(srcdir)/config/vms/vms.cc"
1003 tm_p_file="${tm_p_file} vms/vms-protos.h"
1004 xm_file="vms/xm-vms.h"
1005 c_target_objs="vms-c.o"
1006 cxx_target_objs="vms-c.o"
1007 fortran_target_objs="vms-f.o"
1008 use_gcc_stdint=provide
1009 tm_file="${tm_file} vms/vms-stdint.h"
1010 if test x$gnu_ld != xyes; then
1011 # Build wrappers for native case.
1012 extra_programs="ld\$(exeext) ar\$(exeext)"
1013 tmake_file="$tmake_file vms/t-vmsnative"
1017 tmake_file=t-vxworks
1020 extra_options="${extra_options} vxworks.opt"
1021 extra_objs="$extra_objs vxworks.o"
1023 c_target_objs="${c_target_objs} vxworks-c.o"
1024 cxx_target_objs="${cxx_target_objs} vxworks-c.o"
1025 extra_headers="${extra_headers} ../vxworks/vxworks-predef.h"
1026 target_has_targetcm="yes"
1028 # This private header exposes a consistent interface for checks on
1029 # the VxWorks version our runtime header files need to perform, based on
1030 # what the system headers adverstise:
1032 extra_headers="${extra_headers} ../vxworks/_vxworks-versions.h"
1034 # Starting from VxWorks 7, the system comes with a Dinkumware
1035 # environment which requires the inclusion of "yvals.h" before other
1036 # system headers. We provide wrapped versions of a few headers to
1037 # accomodate such constraints:
1039 extra_headers="${extra_headers} ../vxworks/_yvals.h"
1040 extra_headers="${extra_headers} ../vxworks/_yvals-wrapper.h"
1042 extra_headers="${extra_headers} ../vxworks/math.h ../vxworks/complex.h"
1043 extra_headers="${extra_headers} ../vxworks/inttypes.h ../vxworks/setjmp.h"
1045 # We provide (a tailored version of) stdint.h
1046 tm_file="${tm_file} vxworks-stdint.h"
1047 use_gcc_stdint=provide
1049 case ${enable_threads} in
1051 "" | yes | vxworks) thread_file='vxworks' ;;
1052 *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
1055 # A few common macro definitions conveying general characteristics
1056 # of the configuration at hand. Note that by VxWorks 7, we mean the
1057 # the SR6xx major update or beyond in vendor parlance:
1061 tm_defines="$tm_defines TARGET_VXWORKS7=1"
1066 tm_defines="$tm_defines TARGET_VXWORKS64=1"
1070 # Then a few build configuration controls for VxWorks 7, which
1071 # has specificities on top of which we aim to provide more complete
1076 # VxWorks 7 always has init/fini_array support and it is simpler to
1077 # just leverage this, sticking to what the system toolchain does:
1078 gcc_cv_initfini_array=yes
1082 *-*-elf|arc*-*-elf*)
1083 # Assume that newlib is being used and so __cxa_atexit is provided.
1084 default_use_cxa_atexit=yes
1090 aarch64*-*-elf | aarch64*-*-fuchsia* | aarch64*-*-rtems*)
1091 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h"
1092 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-elf-raw.h"
1093 tmake_file="${tmake_file} aarch64/t-aarch64"
1099 tm_file="${tm_file} fuchsia.h"
1102 tm_file="${tm_file} aarch64/rtems.h rtems.h"
1107 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1110 aarch64_multilibs="${with_multilib_list}"
1111 if test "$aarch64_multilibs" = "default"; then
1112 aarch64_multilibs="lp64,ilp32"
1114 aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
1115 for aarch64_multilib in ${aarch64_multilibs}; do
1116 case ${aarch64_multilib} in
1118 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
1121 echo "--with-multilib-list=${aarch64_multilib} not supported."
1125 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1127 aarch64*-*-freebsd*)
1128 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file}"
1129 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-freebsd.h"
1130 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-freebsd"
1131 tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
1134 tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file}"
1135 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-netbsd.h"
1136 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-netbsd"
1137 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1140 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h"
1141 tm_file="${tm_file} aarch64/aarch64-elf.h aarch64/aarch64-errata.h aarch64/aarch64-linux.h"
1142 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-linux"
1143 tm_defines="${tm_defines} TARGET_DEFAULT_ASYNC_UNWIND_TABLES=1"
1146 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1149 aarch64_multilibs="${with_multilib_list}"
1150 if test "$aarch64_multilibs" = "default"; then
1151 # TODO: turn on ILP32 multilib build after its support is mature.
1152 # aarch64_multilibs="lp64,ilp32"
1153 aarch64_multilibs="lp64"
1155 aarch64_multilibs=`echo $aarch64_multilibs | sed -e 's/,/ /g'`
1156 for aarch64_multilib in ${aarch64_multilibs}; do
1157 case ${aarch64_multilib} in
1159 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${aarch64_multilib}"
1162 echo "--with-multilib-list=${aarch64_multilib} not supported."
1166 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1168 aarch64*-wrs-vxworks*)
1169 tm_file="${tm_file} elfos.h aarch64/aarch64-elf.h"
1170 tm_file="${tm_file} vx-common.h vxworks.h aarch64/aarch64-vxworks.h"
1171 tmake_file="${tmake_file} aarch64/t-aarch64 aarch64/t-aarch64-vxworks"
1174 tm_file="elfos.h ${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h glibc-stdint.h"
1175 tmake_file="${tmake_file} alpha/t-linux alpha/t-alpha"
1176 extra_options="${extra_options} alpha/elf.opt"
1179 tm_file="elfos.h ${tm_file} ${nbsd_tm_file} alpha/elf.h alpha/netbsd.h"
1180 tmake_file="${tmake_file} alpha/t-alpha"
1181 extra_options="${extra_options} netbsd.opt netbsd-elf.opt \
1185 tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
1186 tm_file="elfos.h alpha/alpha.h alpha/elf.h openbsd.h openbsd-stdint.h alpha/openbsd.h openbsd-libpthread.h"
1187 tmake_file="${tmake_file} alpha/t-alpha"
1188 extra_options="${extra_options} openbsd.opt alpha/elf.opt"
1189 # default x-alpha is only appropriate for dec-osf.
1192 tm_file="${tm_file} vms/vms.h alpha/vms.h"
1193 tmake_file="${tmake_file} alpha/t-vms alpha/t-alpha"
1196 tm_file="arc/arc-arch.h dbxelf.h elfos.h newlib-stdint.h arc/elf.h ${tm_file}"
1197 tmake_file="arc/t-multilib arc/t-arc"
1198 extra_gcc_objs="driver-arc.o"
1199 if test "x$with_cpu" != x; then
1200 tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
1202 if test x${with_endian} = x; then
1204 arc*be-*-* | arc*eb-*-*) with_endian=big ;;
1205 *) with_endian=little ;;
1208 case ${with_endian} in
1210 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
1212 case ${with_endian} in
1213 big*) tm_file="arc/big.h ${tm_file}"
1217 tm_file="arc/arc-arch.h dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arc/linux.h ${tm_file}"
1218 tmake_file="${tmake_file} arc/t-multilib-linux arc/t-arc"
1219 extra_gcc_objs="driver-arc.o"
1220 if test "x$with_cpu" != x; then
1221 tm_defines="${tm_defines} TARGET_CPU_BUILD=PROCESSOR_$with_cpu"
1223 if test x${with_endian} = x; then
1225 arc*be-*-* | arc*eb-*-*) with_endian=big ;;
1226 *) with_endian=little ;;
1229 case ${with_endian} in
1231 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
1233 case ${with_endian} in
1234 big*) tm_file="arc/big.h ${tm_file}"
1236 # Force .init_array support. The configure script cannot always
1237 # automatically detect that GAS supports it, yet we require it.
1238 gcc_cv_initfini_array=yes
1241 # We only support VxWorks 7 now on ARM, post SR600. Pre SR600
1242 # VxWorks 7 was transitory and major versions prior to 7 were based
1243 # on long deprecated ABI, not supported at all any more regardless
1245 extra_options="${extra_options} arm/vxworks.opt"
1246 tmake_file="${tmake_file} arm/t-arm arm/t-vxworks arm/t-bpabi"
1247 tm_file="elfos.h arm/elf.h arm/bpabi.h arm/aout.h ${tm_file}"
1248 tm_file="${tm_file} vx-common.h vxworks.h arm/vxworks.h"
1249 target_cpu_cname="generic-armv7-a"
1250 need_64bit_hwint=yes
1252 arm*-*-freebsd*) # ARM FreeBSD EABI
1253 tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h"
1256 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1259 tmake_file="${tmake_file} arm/t-arm arm/t-bpabi"
1260 tm_file="${tm_file} arm/bpabi.h arm/freebsd.h arm/aout.h arm/arm.h"
1263 target_cpu_cname="arm1176jzf-s"
1264 if test $fbsd_major -ge 11; then
1265 tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
1269 target_cpu_cname="generic-armv7-a"
1270 tm_defines="${tm_defines} TARGET_FREEBSD_ARM_HARD_FLOAT=1"
1273 target_cpu_cname="arm9"
1276 with_tls=${with_tls:-gnu}
1279 target_cpu_cname="strongarm"
1280 tmake_file="${tmake_file} arm/t-arm"
1281 tm_file="dbxelf.h elfos.h ${nbsd_tm_file} arm/elf.h"
1282 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1284 arm*eb-*) tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1" ;;
1287 arm*-*-netbsdelf-*eabi*)
1288 tm_file="$tm_file arm/bpabi.h arm/netbsd-elf.h arm/netbsd-eabi.h"
1289 tmake_file="$tmake_file arm/t-bpabi arm/t-netbsdeabi"
1292 tm_file="$tm_file arm/netbsd-elf.h"
1293 tmake_file="$tmake_file arm/t-netbsd"
1296 tm_file="${tm_file} arm/aout.h arm/arm.h"
1298 arm*-*-netbsdelf-*eabihf*)
1299 # Hard-float requires at least Arm v5te
1300 target_cpu_cname="arm10e"
1301 tm_defines="${tm_defines} TARGET_DEFAULT_FLOAT_ABI=ARM_FLOAT_ABI_HARD"
1305 armv6*) target_cpu_cname="arm1176jzf-s";;
1306 armv7*) target_cpu_cname="generic-armv7-a";;
1309 arm*-*-linux-* | arm*-*-uclinuxfdpiceabi)
1310 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
1311 extra_options="${extra_options} linux-android.opt"
1314 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1317 tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
1318 tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h arm/aout.h arm/arm.h"
1320 arm*-*-uclinuxfdpiceabi)
1321 tm_file="$tm_file arm/uclinuxfdpiceabi.h"
1324 # Generation of floating-point instructions requires at least ARMv5te.
1325 if [ "$with_float" = "hard" -o "$with_float" = "softfp" ] ; then
1326 target_cpu_cname="arm10e"
1328 target_cpu_cname="arm10tdmi"
1330 # Define multilib configuration for arm-linux-androideabi.
1333 tmake_file="$tmake_file arm/t-linux-androideabi"
1336 # The EABI requires the use of __cxa_atexit.
1337 default_use_cxa_atexit=yes
1338 with_tls=${with_tls:-gnu}
1340 arm*-*-uclinux*eabi*) # ARM ucLinux
1341 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/uclinux-elf.h glibc-stdint.h"
1342 tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf arm/t-bpabi"
1343 tm_file="$tm_file arm/bpabi.h arm/uclinux-eabi.h arm/aout.h arm/arm.h"
1344 target_cpu_cname="arm7tdmi"
1345 # The EABI requires the use of __cxa_atexit.
1346 default_use_cxa_atexit=yes
1349 tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
1350 tm_file="${tm_file} newlib-stdint.h phoenix.h"
1351 tm_file="${tm_file} arm/aout.h arm/arm.h"
1352 tmake_file="${tmake_file} arm/t-arm arm/t-bpabi arm/t-phoenix"
1353 target_cpu_cname="arm7tdmi"
1355 arm*-*-eabi* | arm*-*-symbianelf* | arm*-*-rtems* | arm*-*-fuchsia*)
1358 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
1360 default_use_cxa_atexit=yes
1361 tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
1362 tmake_file="${tmake_file} arm/t-arm arm/t-arm-elf"
1363 target_cpu_cname="arm7tdmi"
1366 tm_file="$tm_file newlib-stdint.h"
1367 tmake_file="${tmake_file} arm/t-bpabi"
1371 tm_file="${tm_file} fuchsia.h arm/fuchsia-elf.h glibc-stdint.h"
1372 tmake_file="${tmake_file} arm/t-bpabi arm/t-fuchsia"
1373 target_cpu_cname="generic-armv7-a"
1376 tm_file="${tm_file} arm/rtems.h rtems.h newlib-stdint.h"
1377 tmake_file="${tmake_file} arm/t-bpabi arm/t-rtems"
1380 tm_file="${tm_file} arm/symbian.h"
1381 # We do not include t-bpabi for Symbian OS because the system
1382 # provides its own implementation of the BPABI functions.
1383 tmake_file="${tmake_file} arm/t-symbian"
1384 target_cpu_cname="arm10tdmi"
1387 tm_file="${tm_file} arm/aout.h arm/arm.h"
1390 tm_file="elfos.h avr/elf.h avr/avr-arch.h avr/avr.h avr/specs.h dbxelf.h avr/avr-stdint.h"
1391 if test x${with_avrlibc} != xno; then
1392 tm_file="${tm_file} ${cpu_type}/avrlibc.h"
1393 tm_defines="${tm_defines} WITH_AVRLIBC"
1395 # Work out avr_double_comparison which is 2 or 3 and is used in
1396 # target hook FLOAT_LIB_COMPARE_RETURNS_BOOL to determine whether
1397 # DFmode comparisons return 3-state or 2-state results.
1398 case y${with_double_comparison} in
1400 avr_double_comparison=3
1403 avr_double_comparison=2
1406 echo "Error: --with-double-comparison= can only be used with: 'tristate', 'bool', 'libf7'" 1>&2
1410 case "y${with_libf7}" in
1412 # avr_double_comparison as set above.
1415 avr_double_comparison=2
1416 tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
1418 y | yyes | ymath-symbols)
1419 avr_double_comparison=2
1420 tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
1421 tm_defines="${tm_defines} WITH_LIBF7_MATH"
1422 tm_defines="${tm_defines} WITH_LIBF7_MATH_SYMBOLS"
1425 avr_double_comparison=2
1426 tm_defines="${tm_defines} WITH_LIBF7_LIBGCC"
1427 tm_defines="${tm_defines} WITH_LIBF7_MATH"
1430 echo "Error: --with-libf7=${with_libf7} but can only be used with: 'libgcc', 'math', 'math-symbols', 'yes', 'no'" 1>&2
1434 tm_defines="${tm_defines} WITH_DOUBLE_COMPARISON=${avr_double_comparison}"
1435 case y${with_double} in
1438 tm_defines="${tm_defines} HAVE_DOUBLE32"
1442 tm_defines="${tm_defines} HAVE_DOUBLE64"
1446 avr_double_multilib=1
1447 tm_defines="${tm_defines} HAVE_DOUBLE32"
1448 tm_defines="${tm_defines} HAVE_DOUBLE64"
1449 tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
1453 avr_double_multilib=1
1454 tm_defines="${tm_defines} HAVE_DOUBLE32"
1455 tm_defines="${tm_defines} HAVE_DOUBLE64"
1456 tm_defines="${tm_defines} HAVE_DOUBLE_MULTILIB"
1459 echo "Error: --with-double= can only be used with: '32', '32,64', '64,32', '64'" 1>&2
1463 case y${with_long_double} in
1466 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1470 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1474 avr_long_double_multilib=1
1475 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1476 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1477 tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
1481 avr_long_double_multilib=1
1482 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1483 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1484 tm_defines="${tm_defines} HAVE_LONG_DOUBLE_MULTILIB"
1487 avr_long_double=${avr_double}
1488 tm_defines="${tm_defines} HAVE_LONG_DOUBLE_IS_DOUBLE"
1489 if test y${avr_double_multilib} = y1; then
1490 tm_defines="${tm_defines} HAVE_LONG_DOUBLE32"
1491 tm_defines="${tm_defines} HAVE_LONG_DOUBLE64"
1493 tm_defines="${tm_defines} HAVE_LONG_DOUBLE${avr_long_double}"
1497 echo "Error: --with-long_double= can only be used with: '32', '32,64', '64,32', '64', 'double'" 1>&2
1501 if test ${avr_long_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 32xy1z; then
1502 if test y${with_long_double} != ydouble; then
1503 echo "Error: --with-double=${with_double} requests a multilib for double, but long double is always 32 bits wide due to --with-long-double=${with_long_double}" 1>&2
1507 if test ${avr_double}x${avr_long_double_multilib}y${avr_double_multilib}z = 64x1yz; then
1508 echo "Error: --with-long-double=${with_long_double} requests a multilib for long double, but double is always 64 bits wide due to --with-double=64" 1>&2
1511 if test y${avr_double}${avr_long_double} = y6432; then
1512 echo "Error: double default of 64 bits from --with-double=${with_double} conflicts with default of 32 bits for long double from --with-long-double=${with_long_double}" 1>&2
1515 tm_defines="${tm_defines} WITH_DOUBLE${avr_double}"
1516 tm_defines="${tm_defines} WITH_LONG_DOUBLE${avr_long_double}"
1517 tmake_file="${tmake_file} avr/t-avr avr/t-multilib"
1519 extra_gcc_objs="driver-avr.o avr-devices.o"
1520 extra_objs="avr-devices.o avr-log.o"
1523 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
1524 tmake_file=bfin/t-bfin-elf
1528 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/uclinux.h"
1529 tmake_file=bfin/t-bfin-uclinux
1532 bfin*-linux-uclibc*)
1533 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h gnu-user.h linux.h glibc-stdint.h bfin/linux.h ./linux-sysroot-suffix.h"
1534 tmake_file="${tmake_file} bfin/t-bfin-linux"
1538 tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/rtems.h rtems.h newlib-stdint.h"
1539 tmake_file="${tmake_file} bfin/t-rtems"
1542 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h bfin/elf.h"
1547 tm_file="elfos.h ${tm_file}"
1548 tmake_file="${tmake_file} bpf/t-bpf"
1550 extra_headers="bpf-helpers.h"
1551 use_gcc_stdint=provide
1552 extra_objs="coreout.o"
1553 target_gtfiles="$target_gtfiles \$(srcdir)/config/bpf/coreout.cc"
1556 tm_file="elfos.h ${tm_file} newlib-stdint.h"
1557 tmake_file="${tmake_file} cr16/t-cr16 "
1560 cris-*-elf | cris-*-none)
1561 tm_file="elfos.h newlib-stdint.h ${tm_file}"
1562 tmake_file="cris/t-cris cris/t-elfmulti"
1564 extra_options="${extra_options} cris/elf.opt"
1568 if test x${with_endian} != x; then
1569 case ${with_endian} in
1572 echo "with_endian=${with_endian} not supported."
1577 if test x${with_float} != x; then
1578 case ${with_float} in
1581 "Unknown floating point type used in --with-float=$with_float"
1586 tm_file="csky/csky.h"
1587 md_file="csky/csky.md"
1588 out_file="csky/csky.cc"
1589 tm_p_file="${tm_p_file} csky/csky-protos.h"
1590 extra_options="${extra_options} csky/csky_tables.opt"
1592 if test x${enable_tpf_debug} = xyes; then
1593 tm_defines="${tm_defines} ENABLE_TPF_DEBUG"
1598 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} csky/csky-elf.h"
1599 tmake_file="csky/t-csky csky/t-csky-elf"
1600 default_use_cxa_atexit=no
1604 tm_file="dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} csky/csky-linux-elf.h"
1605 tmake_file="${tmake_file} csky/t-csky csky/t-csky-linux"
1609 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
1610 # Force .init_array support. The configure script cannot always
1611 # automatically detect that GAS supports it, yet we require it.
1612 gcc_cv_initfini_array=yes
1614 csky-*-linux-uclibc*)
1615 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_UCLIBC"
1616 default_use_cxa_atexit=no
1619 echo "Unknown target $target"
1625 echo "Unknown target $target"
1630 epiphany-*-elf | epiphany-*-rtems*)
1631 tm_file="dbxelf.h elfos.h ${tm_file}"
1632 tmake_file="${tmake_file} epiphany/t-epiphany"
1635 tm_file="${tm_file} epiphany/rtems.h rtems.h newlib-stdint.h"
1638 tm_file="${tm_file} newlib-stdint.h"
1641 extra_options="${extra_options} fused-madd.opt"
1642 extra_objs="${extra_objs} mode-switch-use.o resolve-sw-modes.o"
1643 tm_defines="${tm_defines} EPIPHANY_STACK_OFFSET=${with_stack_offset:-8}"
1644 extra_headers="epiphany_intrinsics.h"
1647 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1650 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1651 tmake_file=frv/t-frv
1654 tm_file="dbxelf.h elfos.h ${tm_file} \
1655 gnu-user.h linux.h glibc-stdint.h frv/linux.h"
1656 tmake_file="${tmake_file} frv/t-frv frv/t-linux"
1661 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1662 tmake_file="${tmake_file} ft32/t-ft32"
1665 tm_file="elfos.h gcn/gcn-hsa.h gcn/gcn.h newlib-stdint.h"
1666 tmake_file="gcn/t-gcn-hsa"
1667 native_system_header_dir=/include
1668 extra_modes=gcn/gcn-modes.def
1669 extra_objs="${extra_objs} gcn-tree.o"
1670 extra_gcc_objs="driver-gcn.o"
1672 x86_64*-*-linux-gnu )
1673 if test "$ac_cv_search_dlopen" != no; then
1674 extra_programs="${extra_programs} gcn-run\$(exeext)"
1678 if test x$enable_as_accelerator = xyes; then
1679 extra_programs="${extra_programs} mkoffload\$(exeext)"
1680 tm_file="${tm_file} gcn/offload.h"
1682 # Force .init_array support.
1683 gcc_cv_initfini_array=yes
1689 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
1690 tmake_file="${tmake_file} moxie/t-moxie"
1695 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h moxie/uclinux.h"
1696 tmake_file="${tmake_file} moxie/t-moxie"
1699 tmake_file="${tmake_file} moxie/t-moxie"
1700 tm_file="moxie/moxie.h dbxelf.h elfos.h moxie/rtems.h rtems.h newlib-stdint.h"
1705 tm_file="${tm_file} dbxelf.h elfos.h moxie/moxiebox.h newlib-stdint.h"
1706 tmake_file="${tmake_file} moxie/t-moxiebox"
1709 tmake_file="h8300/t-h8300"
1710 tm_file="h8300/h8300.h elfos.h newlib-stdint.h h8300/elf.h"
1713 tmake_file="${tmake_file} h8300/t-h8300 h8300/t-linux"
1714 tm_file="h8300/h8300.h elfos.h gnu-user.h linux.h glibc-stdint.h h8300/linux.h"
1717 target_cpu_default="MASK_PA_11|MASK_PA_20"
1718 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h gnu-user.h linux.h \
1719 glibc-stdint.h pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h \
1721 tmake_file="${tmake_file} pa/t-pa pa/t-linux"
1722 d_target_objs="${d_target_objs} pa-d.o"
1726 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS|MASK_CALLER_COPIES"
1727 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h pa/pa-linux.h \
1728 pa/pa32-regs.h pa/pa32-linux.h"
1729 tmake_file="${tmake_file} pa/t-pa pa/t-linux"
1730 d_target_objs="${d_target_objs} pa-d.o"
1733 target_cpu_default="MASK_PA_11"
1734 tm_file="${tm_file} dbxelf.h elfos.h openbsd.h openbsd-stdint.h openbsd-libpthread.h \
1735 pa/pa-openbsd.h pa/pa32-regs.h pa/pa32-openbsd.h"
1736 extra_options="${extra_options} openbsd.opt"
1737 tmake_file="pa/t-pa"
1738 d_target_objs="${d_target_objs} pa-d.o"
1743 target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
1744 tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} \
1745 pa/pa-netbsd.h pa/pa32-regs.h pa/pa32-netbsd.h"
1746 tmake_file="${tmake_file}"
1747 tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
1748 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1750 hppa[12]*-*-hpux10*)
1752 hppa1.1-*-* | hppa2*-*-*)
1753 target_cpu_default="MASK_PA_11"
1756 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1757 pa/pa-hpux.h pa/pa-hpux10.h"
1758 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux10.opt"
1761 tm_file="${tm_file} pa/pa-hpux1010.h"
1762 extra_options="${extra_options} pa/pa-hpux1010.opt"
1765 use_gcc_stdint=provide
1766 tm_file="${tm_file} hpux-stdint.h"
1767 tmake_file="pa/t-pa t-slibgcc"
1768 d_target_objs="${d_target_objs} pa-d.o"
1769 case ${enable_threads} in
1771 if test x$have_pthread_h = xyes ; then
1772 tmake_file="${tmake_file} pa/t-dce-thr"
1776 tmake_file="${tmake_file} pa/t-dce-thr"
1781 if test "x$with_dwarf2" != x; then
1782 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1787 target_cpu_default="MASK_PA_11|MASK_PA_20"
1788 if test x$gnu_ld = xyes
1790 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1792 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
1793 pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
1797 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
1798 extra_options="${extra_options} pa/pa-hpux1111.opt"
1801 tm_file="${tm_file} pa/pa-hpux1131.h pa/pa-64.h pa/pa64-hpux.h"
1802 extra_options="${extra_options} pa/pa-hpux1131.opt"
1805 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
1808 extra_options="${extra_options} pa/pa-hpux.opt \
1809 pa/pa-hpux1010.opt pa/pa64-hpux.opt hpux11.opt"
1810 tmake_file="pa/t-pa t-slibgcc"
1811 d_target_objs="${d_target_objs} pa-d.o"
1812 case x${enable_threads} in
1820 use_gcc_stdint=provide
1821 tm_file="${tm_file} hpux-stdint.h"
1825 tm_file="${tm_file} hpux-stdint.h"
1829 hppa[12]*-*-hpux11*)
1831 hppa1.1-*-* | hppa2*-*-*)
1832 target_cpu_default="MASK_PA_11"
1835 tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
1836 pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
1837 extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt \
1841 tm_file="${tm_file} pa/pa-hpux1111.h"
1842 extra_options="${extra_options} pa/pa-hpux1111.opt"
1845 tm_file="${tm_file} pa/pa-hpux1131.h"
1846 extra_options="${extra_options} pa/pa-hpux1131.opt"
1849 tmake_file="pa/t-pa t-slibgcc"
1850 d_target_objs="${d_target_objs} pa-d.o"
1851 case x${enable_threads} in
1860 use_gcc_stdint=provide
1861 tm_file="${tm_file} hpux-stdint.h"
1865 tm_file="${tm_file} hpux-stdint.h"
1868 if test "x$with_dwarf2" != x; then
1869 echo "Warning: dwarf2 debug format is not supported for this target, --with-dwarf2 ignored" 1>&2
1873 i[34567]86-*-darwin1[89]* | i[34567]86-*-darwin2*)
1874 echo "Error: 32bit target is not supported after Darwin17" 1>&2
1876 i[34567]86-*-darwin*)
1878 # Baseline choice for a machine that allows m64 support.
1879 with_cpu=${with_cpu:-core2}
1880 tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch t-slibgcc"
1881 tm_file="${cpu_type}/darwin32-biarch.h ${tm_file} "
1883 x86_64-*-darwin1[89]* | x86_64-*-darwin2*)
1885 tm_defines="${tm_defines} TARGET_64BIT_DEFAULT=(OPTION_MASK_ISA_64BIT|OPTION_MASK_ABI_64)"
1886 tm_defines="${tm_defines} TARGET_BI_ARCH=0"
1887 with_cpu=${with_cpu:-core2}
1888 tmake_file="${tmake_file} t-slibgcc"
1891 with_cpu=${with_cpu:-core2}
1892 tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
1893 tm_file="${cpu_type}/darwin64-biarch.h ${tm_file} "
1895 i[34567]86-*-elfiamcu)
1896 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/iamcu.h"
1899 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h"
1902 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h"
1905 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rtemself.h rtems.h"
1908 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/rdos.h"
1911 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h i386/rdos.h i386/rdos64.h"
1912 tmake_file="i386/t-i386elf t-svr4"
1914 i[34567]86-*-dragonfly*)
1915 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/dragonfly.h"
1916 tmake_file="${tmake_file} i386/t-crtstuff"
1918 x86_64-*-dragonfly*)
1919 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h dragonfly.h dragonfly-stdint.h i386/x86-64.h i386/dragonfly.h"
1920 tmake_file="${tmake_file} i386/t-crtstuff"
1922 i[34567]86-*-freebsd*)
1923 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1926 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1928 i[34567]86-*-netbsdelf*)
1929 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/netbsd-elf.h"
1930 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1933 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${nbsd_tm_file} i386/x86-64.h i386/netbsd64.h"
1934 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
1936 i[34567]86-*-openbsd*)
1937 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1938 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/openbsdelf.h"
1939 extra_options="${extra_options} openbsd.opt"
1944 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1945 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h i386/x86-64.h i386/openbsdelf.h"
1946 extra_options="${extra_options} openbsd.opt"
1950 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-gnu* | i[34567]86-*-kopensolaris*-gnu)
1951 # Intel 80386's running GNU/*
1952 # with ELF format using glibc 2
1953 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h"
1955 i[34567]86-*-linux*)
1956 tm_file="${tm_file} linux.h linux-android.h"
1957 extra_options="${extra_options} linux-android.opt"
1958 if test x$enable_targets = xall; then
1959 tm_file="${tm_file} i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h i386/linux-common.h i386/linux64.h"
1960 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1961 tmake_file="${tmake_file} i386/t-linux64"
1962 x86_multilibs="${with_multilib_list}"
1963 if test "$x86_multilibs" = "default"; then
1964 x86_multilibs="m64,m32"
1966 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
1967 for x86_multilib in ${x86_multilibs}; do
1968 case ${x86_multilib} in
1970 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
1973 echo "--with-multilib-list=${x86_with_multilib} not supported."
1977 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
1979 if test x$with_cpu = x; then
1980 if test x$with_cpu_64 = x; then
1984 case " $x86_cpus $x86_archs $x86_64_archs " in
1988 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
1989 echo "$x86_cpus $x86_archs $x86_64_archs " 1>&2
1995 tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h i386/linux-common.h i386/linux.h"
1998 i[34567]86-*-kfreebsd*-gnu)
1999 tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kfreebsd-gnu.h i386/kfreebsd-gnu.h"
2001 i[34567]86-*-kopensolaris*-gnu)
2002 tm_file="${tm_file} i386/gnu-user-common.h i386/gnu-user.h kopensolaris-gnu.h i386/kopensolaris-gnu.h"
2005 tm_file="$tm_file i386/gnu-user-common.h i386/gnu-user.h gnu.h i386/gnu.h"
2009 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu)
2010 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h gnu-user.h glibc-stdint.h \
2011 i386/x86-64.h i386/gnu-user-common.h i386/gnu-user64.h"
2014 tm_file="${tm_file} linux.h linux-android.h i386/linux-common.h i386/linux64.h"
2015 extra_options="${extra_options} linux-android.opt"
2017 x86_64-*-kfreebsd*-gnu)
2018 tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu64.h"
2021 tmake_file="${tmake_file} i386/t-linux64"
2022 x86_multilibs="${with_multilib_list}"
2023 if test "$x86_multilibs" = "default"; then
2026 x86_multilibs="mx32"
2029 x86_multilibs="m64,m32"
2033 x86_multilibs=`echo $x86_multilibs | sed -e 's/,/ /g'`
2034 for x86_multilib in ${x86_multilibs}; do
2035 case ${x86_multilib} in
2037 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${x86_multilib}"
2040 echo "--with-multilib-list=${x86_with_multilib} not supported."
2044 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
2046 i[34567]86-pc-msdosdjgpp*)
2047 xm_file=i386/xm-djgpp.h
2048 tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h i386/djgpp-stdint.h"
2049 native_system_header_dir=/dev/env/DJDIR/include
2050 extra_options="${extra_options} i386/djgpp.opt"
2055 i[34567]86-*-lynxos*)
2057 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
2058 tmake_file="${tmake_file} t-lynx"
2059 extra_options="${extra_options} lynx.opt"
2064 i[34567]86-*-nto-qnx*)
2065 tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h i386/unix.h i386/nto.h"
2066 extra_options="${extra_options} i386/nto.opt"
2070 i[34567]86-*-rtems*)
2071 tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h newlib-stdint.h"
2072 tmake_file="${tmake_file} i386/t-rtems"
2074 i[34567]86-*-solaris2* | x86_64-*-solaris2*)
2075 # Set default arch_32 to pentium4, tune_32 to generic like the other
2076 # i386 targets, although config.guess defaults to i386-pc-solaris2*.
2077 with_arch_32=${with_arch_32:-pentium4}
2078 with_tune_32=${with_tune_32:-generic}
2079 tm_file="${tm_file} i386/unix.h i386/att.h ${sol2_tm_file_head} i386/x86-64.h ${sol2_tm_file_tail}"
2080 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
2081 tmake_file="$tmake_file i386/t-sol2"
2083 if test x$with_cpu = x; then
2084 if test x$with_cpu_64 = x; then
2088 case " $x86_cpus $x86_archs $x86_64_archs " in
2092 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
2093 echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
2099 i[4567]86-wrs-vxworks*|x86_64-wrs-vxworks7*)
2100 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h"
2104 tm_file="${tm_file} i386/x86-64.h"
2107 tm_file="${tm_file} vx-common.h"
2110 tm_file="${tm_file} vxworksae.h i386/vxworks.h i386/vxworksae.h"
2111 tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
2114 tm_file="${tm_file} vxworks.h i386/vxworks.h"
2115 tmake_file="${tmake_file} i386/t-vxworks"
2119 i[34567]86-*-cygwin*)
2120 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-stdint.h"
2121 xm_file=i386/xm-cygwin.h
2122 tmake_file="${tmake_file} i386/t-cygming t-slibgcc"
2123 target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
2124 extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
2125 extra_objs="${extra_objs} winnt.o winnt-stubs.o"
2126 c_target_objs="${c_target_objs} msformat-c.o"
2127 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
2128 d_target_objs="${d_target_objs} winnt-d.o"
2129 target_has_targetdm="yes"
2130 if test x$enable_threads = xyes; then
2133 default_use_cxa_atexit=yes
2138 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h i386/cygwin-w64.h i386/cygwin-stdint.h"
2139 xm_file=i386/xm-cygwin.h
2140 tmake_file="${tmake_file} i386/t-cygming t-slibgcc i386/t-cygwin-w64"
2141 target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
2142 extra_options="${extra_options} i386/cygming.opt i386/cygwin.opt"
2143 extra_objs="${extra_objs} winnt.o winnt-stubs.o"
2144 c_target_objs="${c_target_objs} msformat-c.o"
2145 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
2146 d_target_objs="${d_target_objs} winnt-d.o"
2147 target_has_targetdm="yes"
2148 if test x$enable_threads = xyes; then
2151 default_use_cxa_atexit=yes
2153 tm_defines="${tm_defines} TARGET_CYGWIN64=1"
2155 i[34567]86-*-mingw* | x86_64-*-mingw*)
2156 tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h"
2157 xm_file=i386/xm-mingw32.h
2158 c_target_objs="${c_target_objs} winnt-c.o"
2159 cxx_target_objs="${cxx_target_objs} winnt-c.o"
2160 d_target_objs="${d_target_objs} winnt-d.o"
2161 target_has_targetcm="yes"
2162 target_has_targetdm="yes"
2164 x86_64-*-* | *-w64-*)
2170 if test x$enable_threads = xposix ; then
2171 tm_file="${tm_file} i386/mingw-pthread.h"
2173 tm_file="${tm_file} i386/mingw32.h"
2174 # This makes the logic if mingw's or the w64 feature set has to be used
2177 user_headers_inc_next_post="${user_headers_inc_next_post} float.h"
2178 user_headers_inc_next_pre="${user_headers_inc_next_pre} stddef.h stdarg.h"
2179 tm_file="${tm_file} i386/mingw-w64.h"
2180 if test x$enable_targets = xall; then
2181 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
2182 if test x$with_cpu = x; then
2183 if test x$with_cpu_64 = x; then
2187 case " $x86_cpus $x86_archs $x86_64_archs " in
2191 echo "Unsupported CPU used in --with-cpu=$with_cpu, supported values:" 1>&2
2192 echo "$x86_cpus $x86_archs $x86_64_archs" 1>&2
2202 tm_file="${tm_file} i386/mingw-stdint.h"
2203 tmake_file="${tmake_file} t-winnt i386/t-cygming t-slibgcc"
2206 tmake_file="${tmake_file} i386/t-mingw-w64"
2209 tmake_file="${tmake_file} i386/t-mingw-w32"
2212 native_system_header_dir=/mingw/include
2213 target_gtfiles="$target_gtfiles \$(srcdir)/config/i386/winnt.cc"
2214 extra_options="${extra_options} i386/cygming.opt i386/mingw.opt"
2217 extra_options="${extra_options} i386/mingw-w64.opt"
2222 extra_objs="${extra_objs} winnt.o winnt-stubs.o"
2223 c_target_objs="${c_target_objs} msformat-c.o"
2224 cxx_target_objs="${cxx_target_objs} winnt-cxx.o msformat-c.o"
2227 default_use_cxa_atexit=yes
2229 case ${enable_threads} in
2239 tm_file="${tm_file} i386/crtdll.h"
2241 *mingw32msv* | *mingw*)
2246 tmake_file="${tmake_file} i386/t-x86_64-elf"
2247 tm_file="${tm_file} i386/unix.h i386/att.h elfos.h newlib-stdint.h i386/i386elf.h i386/x86-64.h fuchsia.h"
2250 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h ia64/sysv4.h ia64/elf.h"
2251 tmake_file="ia64/t-ia64"
2252 target_cpu_default="0"
2253 if test x$gas = xyes
2255 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
2257 if test x$gnu_ld = xyes
2259 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
2263 tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
2264 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
2265 tmake_file="${tmake_file} ia64/t-ia64"
2268 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h ia64/sysv4.h ia64/linux.h"
2269 tmake_file="${tmake_file} ia64/t-ia64 ia64/t-linux t-libunwind"
2270 target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
2273 tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/hpux.h"
2274 tmake_file="ia64/t-ia64 ia64/t-hpux t-slibgcc"
2275 target_cpu_default="MASK_GNU_AS"
2276 case x$enable_threads in
2282 c_target_objs="ia64-c.o"
2283 cxx_target_objs="ia64-c.o"
2284 extra_options="${extra_options} ia64/ilp32.opt hpux11.opt"
2286 tm_file="${tm_file} hpux-stdint.h"
2289 tm_file="${tm_file} ia64/hpux-unix2003.h"
2294 tm_file="${tm_file} elfos.h ia64/sysv4.h vms/vms.h ia64/vms.h"
2295 tmake_file="${tmake_file} ia64/t-ia64"
2296 target_cpu_default="0"
2297 if test x$gas = xyes
2299 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
2301 extra_options="${extra_options} ia64/vms.opt"
2304 tm_file="elfos.h newlib-stdint.h iq2000/iq2000.h"
2305 out_file=iq2000/iq2000.cc
2306 md_file=iq2000/iq2000.md
2309 tm_file="dbxelf.h elfos.h ${tm_file} newlib-stdint.h"
2310 tmake_file="${tmake_file} lm32/t-lm32"
2313 tm_file="dbxelf.h elfos.h ${tm_file} lm32/rtems.h rtems.h newlib-stdint.h"
2314 tmake_file="${tmake_file} lm32/t-lm32"
2315 tmake_file="${tmake_file} lm32/t-rtems"
2318 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h lm32/uclinux-elf.h"
2319 tmake_file="${tmake_file} lm32/t-lm32"
2322 tm_file="elfos.h newlib-stdint.h ${tm_file}"
2325 tm_file="elfos.h newlib-stdint.h m32r/little.h ${tm_file}"
2327 m68k-*-elf* | fido-*-elf*)
2330 # Check that $with_cpu makes sense.
2335 echo "Cannot accept --with-cpu=$with_cpu"
2342 default_m68k_cpu=68020
2346 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h newlib-stdint.h m68k/m68kemb.h m68k/m68020-elf.h"
2347 tm_defines="${tm_defines} MOTOROLA=1"
2348 tmake_file="m68k/t-floatlib m68k/t-m68kbare m68k/t-m68kelf"
2349 # Add multilibs for targets other than fido.
2354 tmake_file="$tmake_file m68k/t-mlibs"
2359 default_m68k_cpu=68020
2361 tm_file="${tm_file} dbxelf.h elfos.h ${nbsd_tm_file} m68k/netbsd-elf.h"
2362 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2363 tm_defines="${tm_defines} MOTOROLA=1 CHAR_FAST8=1 SHORT_FAST16=1"
2365 m68k-*-uclinux*) # Motorola m68k/ColdFire running uClinux
2366 # with uClibc, using the new GNU/Linux-style
2368 default_m68k_cpu=68020
2370 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h flat.h m68k/linux.h m68k/uclinux.h ./sysroot-suffix.h"
2371 extra_options="${extra_options} m68k/uclinux.opt"
2372 tm_defines="${tm_defines} MOTOROLA=1"
2373 tmake_file="m68k/t-floatlib m68k/t-uclinux m68k/t-mlibs"
2375 m68k-*-linux*) # Motorola m68k's running GNU/Linux
2376 # with ELF format using glibc 2
2377 # aka the GNU/Linux C library 6.
2378 default_m68k_cpu=68020
2380 with_arch=${with_arch:-m68k}
2381 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h m68k/linux.h ./sysroot-suffix.h"
2382 extra_options="${extra_options} m68k/ieee.opt"
2383 tm_defines="${tm_defines} MOTOROLA=1"
2384 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-linux m68k/t-mlibs"
2387 default_m68k_cpu=68020
2389 tmake_file="${tmake_file} m68k/t-floatlib m68k/t-m68kbare m68k/t-crtstuff m68k/t-rtems m68k/t-mlibs"
2390 tm_file="${tm_file} m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h newlib-stdint.h"
2391 tm_defines="${tm_defines} MOTOROLA=1"
2394 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} mcore/mcore-elf.h"
2395 tmake_file=mcore/t-mcore
2401 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
2404 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
2407 tm_file="${tm_file} dbxelf.h gnu-user.h linux.h microblaze/linux.h"
2408 tm_file="${tm_file} glibc-stdint.h"
2409 c_target_objs="${c_target_objs} microblaze-c.o"
2410 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
2411 tmake_file="${tmake_file} microblaze/t-microblaze"
2412 tmake_file="${tmake_file} microblaze/t-microblaze-linux"
2414 microblaze*-*-rtems*)
2417 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
2420 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
2423 tm_file="${tm_file} dbxelf.h"
2424 tm_file="${tm_file} microblaze/rtems.h rtems.h newlib-stdint.h"
2425 c_target_objs="${c_target_objs} microblaze-c.o"
2426 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
2427 tmake_file="${tmake_file} microblaze/t-microblaze"
2428 tmake_file="${tmake_file} microblaze/t-rtems"
2433 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=0"
2436 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=4321"
2439 tm_file="${tm_file} dbxelf.h newlib-stdint.h"
2440 c_target_objs="${c_target_objs} microblaze-c.o"
2441 cxx_target_objs="${cxx_target_objs} microblaze-c.o"
2442 tmake_file="${tmake_file} microblaze/t-microblaze"
2445 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h ${tm_file} riscv/linux.h"
2446 case "x${enable_multilib}" in
2448 xyes) tmake_file="${tmake_file} riscv/t-linux-multilib" ;;
2449 *) echo "Unknown value for enable_multilib"; exit 1
2451 tmake_file="${tmake_file} riscv/t-riscv riscv/t-linux"
2455 riscv32be-*|riscv64be-*)
2456 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2459 # Force .init_array support. The configure script cannot always
2460 # automatically detect that GAS supports it, yet we require it.
2461 gcc_cv_initfini_array=yes
2463 riscv*-*-elf* | riscv*-*-rtems*)
2464 tm_file="elfos.h newlib-stdint.h ${tm_file} riscv/elf.h"
2467 tm_file="${tm_file} riscv/rtems.h rtems.h"
2468 tmake_file="${tmake_file} riscv/t-rtems"
2471 if test "x${with_multilib_generator}" == xdefault; then
2472 case "x${enable_multilib}" in
2474 xyes) tmake_file="${tmake_file} riscv/t-elf-multilib" ;;
2475 *) echo "Unknown value for enable_multilib"; exit 1
2479 tmake_file="${tmake_file} riscv/t-riscv"
2483 riscv32be-*|riscv64be-*)
2484 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2487 # Force .init_array support. The configure script cannot always
2488 # automatically detect that GAS supports it, yet we require it.
2489 gcc_cv_initfini_array=yes
2492 tm_file="${tm_file} elfos.h ${fbsd_tm_file} riscv/freebsd.h"
2493 tmake_file="${tmake_file} riscv/t-riscv"
2497 riscv32be-*|riscv64be-*)
2498 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2501 # Force .init_array support. The configure script cannot always
2502 # automatically detect that GAS supports it, yet we require it.
2503 gcc_cv_initfini_array=yes
2506 loongarch*-*-linux*)
2507 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file}"
2508 tm_file="${tm_file} loongarch/gnu-user.h loongarch/linux.h"
2509 extra_options="${extra_options} linux-android.opt"
2510 tmake_file="${tmake_file} loongarch/t-linux"
2514 # Force .init_array support. The configure script cannot always
2515 # automatically detect that GAS supports it, yet we require it.
2516 gcc_cv_initfini_array=yes
2519 mips*-*-netbsd*) # NetBSD/mips, either endian.
2520 target_cpu_default="MASK_ABICALLS"
2521 tm_file="elfos.h ${tm_file} mips/elf.h ${nbsd_tm_file} mips/netbsd.h"
2522 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2525 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
2526 extra_options="${extra_options} linux-android.opt"
2527 tmake_file="${tmake_file} mips/t-img-linux"
2528 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
2529 with_arch_32="mips32r6"
2530 with_arch_64="mips64r6"
2535 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h mips/mti-linux.h"
2536 extra_options="${extra_options} linux-android.opt"
2537 tmake_file="${tmake_file} mips/t-mti-linux"
2538 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
2539 with_arch_32="mips32r2"
2540 with_arch_64="mips64r2"
2544 mips*-*-linux*) # Linux MIPS, either endian.
2545 tm_file="dbxelf.h elfos.h gnu-user.h linux.h linux-android.h glibc-stdint.h ${tm_file} mips/gnu-user.h mips/linux.h mips/linux-common.h"
2546 extra_options="${extra_options} linux-android.opt"
2549 default_mips_arch=mips32r6
2552 default_mips_arch=mips32r2
2555 default_mips_arch=mips32
2557 mips64el-st-linux-gnu)
2558 default_mips_abi=n32
2559 tm_file="${tm_file} mips/st.h"
2560 tmake_file="${tmake_file} mips/t-st"
2561 enable_mips_multilibs="yes"
2563 mips64octeon*-*-linux*)
2564 default_mips_abi=n32
2565 tm_defines="${tm_defines} MIPS_CPU_STRING_DEFAULT=\\\"octeon\\\""
2566 target_cpu_default=MASK_SOFT_FLOAT_ABI
2567 enable_mips_multilibs="yes"
2569 mipsisa64r6*-*-linux-gnuabi64)
2571 default_mips_arch=mips64r6
2572 enable_mips_multilibs="yes"
2574 mipsisa64r6*-*-linux*)
2575 default_mips_abi=n32
2576 default_mips_arch=mips64r6
2577 enable_mips_multilibs="yes"
2579 mipsisa64r2*-*-linux-gnuabi64)
2581 default_mips_arch=mips64r2
2582 enable_mips_multilibs="yes"
2584 mipsisa64r2*-*-linux*)
2585 default_mips_abi=n32
2586 default_mips_arch=mips64r2
2587 enable_mips_multilibs="yes"
2589 mips64*-*-linux-gnuabi64 | mipsisa64*-*-linux-gnuabi64)
2591 enable_mips_multilibs="yes"
2593 mips64*-*-linux* | mipsisa64*-*-linux*)
2594 default_mips_abi=n32
2595 enable_mips_multilibs="yes"
2598 if test x$enable_targets = xall; then
2599 enable_mips_multilibs="yes"
2601 if test x$enable_mips_multilibs = xyes; then
2602 tmake_file="${tmake_file} mips/t-linux64"
2606 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
2607 tmake_file="mips/t-mti-elf"
2608 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
2609 with_arch_32="mips32r2"
2610 with_arch_64="mips64r2"
2613 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h mips/mti-elf.h"
2614 tmake_file="mips/t-img-elf"
2615 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
2616 with_arch_32="mips32r6"
2617 with_arch_64="mips64r6"
2620 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h mips/sde.h"
2621 tmake_file="mips/t-sde"
2622 extra_options="${extra_options} mips/sde.opt"
2623 case "${with_newlib}" in
2625 # newlib / libgloss.
2628 # MIPS toolkit libraries.
2629 tm_file="$tm_file mips/sdemtk.h"
2630 tmake_file="$tmake_file mips/t-sdemtk"
2631 case ${enable_threads} in
2633 thread_file='mipssde'
2640 tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6 MIPS_ABI_DEFAULT=ABI_32"
2643 tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2 MIPS_ABI_DEFAULT=ABI_32"
2646 tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32 MIPS_ABI_DEFAULT=ABI_32"
2649 tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6 MIPS_ABI_DEFAULT=ABI_N32"
2652 tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2 MIPS_ABI_DEFAULT=ABI_N32"
2655 tm_defines="MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_ABI_DEFAULT=ABI_N32"
2659 mipsisa32-*-elf* | mipsisa32el-*-elf* | \
2660 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf* | \
2661 mipsisa32r6-*-elf* | mipsisa32r6el-*-elf* | \
2662 mipsisa64-*-elf* | mipsisa64el-*-elf* | \
2663 mipsisa64r2-*-elf* | mipsisa64r2el-*-elf* | \
2664 mipsisa64r6-*-elf* | mipsisa64r6el-*-elf*)
2665 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2666 tmake_file="mips/t-isa3264"
2669 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6"
2672 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2"
2675 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32"
2678 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6"
2681 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2"
2684 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64"
2688 mipsisa32*-*-elfoabi*)
2689 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_32"
2690 tm_file="${tm_file} mips/elfoabi.h"
2692 mipsisa64*-*-elfoabi*)
2693 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_O64"
2694 tm_file="${tm_file} mips/elfoabi.h"
2697 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
2701 mipsisa64sr71k-*-elf*)
2702 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2703 tmake_file=mips/t-sr71k
2704 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
2706 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
2707 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2708 tmake_file="mips/t-elf mips/t-sb1"
2709 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
2711 mips-*-elf* | mipsel-*-elf* | mipsr5900-*-elf* | mipsr5900el-*-elf*)
2712 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2713 tmake_file="mips/t-elf"
2715 mips64r5900-*-elf* | mips64r5900el-*-elf*)
2716 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/n32-elf.h"
2717 tmake_file="mips/t-elf"
2718 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_N32"
2720 mips64-*-elf* | mips64el-*-elf*)
2721 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h"
2722 tmake_file="mips/t-elf"
2723 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
2725 mips64vr-*-elf* | mips64vrel-*-elf*)
2726 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/vr.h mips/elf.h"
2727 tmake_file=mips/t-vr
2728 tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_EABI"
2730 mips64orion-*-elf* | mips64orionel-*-elf*)
2731 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elforion.h mips/elf.h"
2732 tmake_file="mips/t-elf"
2733 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3 MIPS_ABI_DEFAULT=ABI_O64"
2736 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
2737 tmake_file="${tmake_file} mips/t-elf mips/t-rtems"
2740 tm_file="elfos.h ${tm_file} mips/elf.h vx-common.h vxworks.h mips/vxworks.h"
2741 tmake_file="${tmake_file} mips/t-vxworks"
2743 mipstx39-*-elf* | mipstx39el-*-elf*)
2744 tm_file="elfos.h newlib-stdint.h ${tm_file} mips/r3900.h mips/elf.h"
2745 tmake_file="mips/t-r3900"
2747 mmix-knuth-mmixware)
2748 tm_file="${tm_file} newlib-stdint.h"
2752 tm_file="elfos.h newlib-stdint.h ${tm_file}"
2757 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
2758 c_target_objs="msp430-c.o"
2759 cxx_target_objs="msp430-c.o"
2760 tmake_file="${tmake_file} msp430/t-msp430"
2761 extra_objs="${extra_objs} msp430-devices.o"
2762 extra_gcc_objs="driver-msp430.o msp430-devices.o"
2763 # Enable .init_array unless it has been explicitly disabled.
2764 # The MSP430 EABI mandates the use of .init_array, and the Newlib CRT
2765 # code since mid-2019 expects it.
2766 if test x${disable_initfini_array} != xyes; then
2767 gcc_cv_initfini_array=yes
2771 # __cxa_atexit increases code size, and we don't need to support
2772 # dynamic shared objects on MSP430, so regular Newlib atexit is a
2773 # fine replacement as it also supports registration of more than 32
2775 default_use_cxa_atexit=no
2776 # This target does not match the generic *-*-elf case above which
2777 # sets use_gcc_stdint=wrap, so explicitly set it here.
2783 target_cpu_default="0"
2784 tm_defines="${tm_defines}"
2789 target_cpu_default="${target_cpu_default}|MASK_BIG_ENDIAN"
2790 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
2795 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file} nds32/elf.h nds32/nds32_intrinsic.h"
2796 tmake_file="nds32/t-nds32 nds32/t-elf"
2799 tm_file="dbxelf.h elfos.h ${tm_file} gnu-user.h linux.h glibc-stdint.h nds32/linux.h nds32/nds32_intrinsic.h"
2800 tmake_file="${tmake_file} nds32/t-nds32 nds32/t-linux"
2801 gcc_cv_initfini_array=yes
2805 # Handle --enable-default-relax setting.
2806 if test x${enable_default_relax} = xyes; then
2807 tm_defines="${tm_defines} TARGET_DEFAULT_RELAX=1"
2809 # Handle --with-ext-dsp
2810 if test x${with_ext_dsp} = xyes; then
2811 tm_defines="${tm_defines} TARGET_DEFAULT_EXT_DSP=1"
2815 tm_file="elfos.h ${tm_file}"
2816 tmake_file="${tmake_file} nios2/t-nios2"
2819 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h nios2/linux.h "
2822 tm_file="${tm_file} newlib-stdint.h nios2/elf.h"
2823 extra_options="${extra_options} nios2/elf.opt"
2826 tm_file="${tm_file} newlib-stdint.h nios2/rtems.h rtems.h"
2827 tmake_file="${tmake_file} t-rtems nios2/t-rtems"
2832 tm_file="${tm_file} newlib-stdint.h"
2834 tmake_file="nvptx/t-nvptx"
2835 if test x$enable_as_accelerator = xyes; then
2836 extra_programs="${extra_programs} mkoffload\$(exeext)"
2837 tm_file="${tm_file} nvptx/offload.h"
2841 tm_file="elfos.h ${tm_file}"
2842 tmake_file="${tmake_file} or1k/t-or1k"
2843 # Force .init_array support. The configure script cannot always
2844 # automatically detect that GAS supports it, yet we require it.
2845 gcc_cv_initfini_array=yes
2847 # Handle --with-multilib-list=...
2848 or1k_multilibs="${with_multilib_list}"
2849 if test "$or1k_multilibs" = "default"; then
2850 or1k_multilibs="mcmov,msoft-mul,msoft-div"
2852 or1k_multilibs=`echo $or1k_multilibs | sed -e 's/,/ /g'`
2853 for or1k_multilib in ${or1k_multilibs}; do
2854 case ${or1k_multilib} in
2855 mcmov | msext | msfimm | \
2857 mhard-float | mdouble-float | munordered-float | msoft-float | \
2858 mhard-div | mhard-mul | \
2859 msoft-div | msoft-mul )
2860 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG},${or1k_multilib}"
2863 echo "--with-multilib-list=${with_multilib_list} not supported."
2867 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's/^,//'`
2871 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h"
2872 tm_file="${tm_file} or1k/linux.h"
2875 tm_file="${tm_file} newlib-stdint.h or1k/elf.h"
2876 extra_options="${extra_options} or1k/elf.opt"
2879 tm_file="${tm_file} newlib-stdint.h or1k/rtems.h rtems.h"
2880 tmake_file="${tmake_file} or1k/t-rtems"
2885 tm_file="${tm_file} newlib-stdint.h"
2888 # port not yet contributed
2889 #powerpc-*-openbsd*)
2890 # tmake_file="${tmake_file} rs6000/t-fprules"
2894 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2896 *-darwin1[0-9]* | *-darwin9*)
2897 tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
2898 tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
2901 tmake_file="${tmake_file} ${cpu_type}/t-darwin32-biarch"
2902 tm_file="${tm_file} ${cpu_type}/darwin32-biarch.h"
2905 tm_file="${tm_file} ${cpu_type}/darwin7.h"
2908 # Earlier - ingle arch, with 32b only
2909 # OS X 10.0, the first edition is Darwin4
2912 tmake_file="${tmake_file} t-slibgcc"
2914 powerpc64-*-darwin*)
2915 extra_options="${extra_options} ${cpu_type}/darwin.opt"
2916 tmake_file="${tmake_file} ${cpu_type}/t-darwin64-biarch t-slibgcc"
2917 tm_file="${tm_file} ${cpu_type}/darwin64-biarch.h"
2919 powerpc*-*-freebsd*)
2920 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${fbsd_tm_file} rs6000/sysv4.h"
2921 extra_options="${extra_options} rs6000/sysv4.opt"
2922 tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
2925 tm_file="${tm_file} rs6000/sysv4le.h" ;;
2929 tm_file="${tm_file} rs6000/default64.h rs6000/freebsd64.h"
2930 tmake_file="${tmake_file} rs6000/t-freebsd64"
2931 extra_options="${extra_options} rs6000/linux64.opt"
2932 if test $fbsd_major -ge 13; then
2933 tm_defines="${tm_defines} TARGET_FREEBSD32_SECURE_PLT=1"
2937 if test $fbsd_major -ge 13; then
2938 tm_file="rs6000/secureplt.h ${tm_file}"
2940 tm_file="${tm_file} rs6000/freebsd.h"
2945 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h ${nbsd_tm_file} freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
2946 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
2947 tmake_file="${tmake_file} rs6000/t-netbsd"
2948 extra_options="${extra_options} rs6000/sysv4.opt"
2950 powerpc-*-eabisimaltivec*)
2951 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
2952 extra_options="${extra_options} rs6000/sysv4.opt"
2953 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2957 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
2958 extra_options="${extra_options} rs6000/sysv4.opt"
2959 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2963 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h"
2964 extra_options="${extra_options} rs6000/sysv4.opt"
2965 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2967 powerpc-*-eabialtivec*)
2968 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
2969 extra_options="${extra_options} rs6000/sysv4.opt"
2970 tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
2974 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/eabi.h"
2975 extra_options="${extra_options} rs6000/sysv4.opt"
2976 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
2980 tm_file="rs6000/biarch64.h ${tm_file} dbxelf.h elfos.h gnu-user.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/rtems.h rtems.h"
2981 extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
2982 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-rtems rs6000/t-ppccomm"
2985 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h freebsd-spec.h rs6000/sysv4.h"
2986 extra_options="${extra_options} rs6000/sysv4.opt"
2987 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm"
2988 extra_objs="$extra_objs rs6000-linux.o"
2991 tm_file="${tm_file} rs6000/sysv4le.h" ;;
2993 case ${target}:${with_cpu} in
2994 powerpc64*: | powerpc64*:native) cpu_is_64bit=yes ;;
2996 maybe_biarch=${cpu_is_64bit}
2997 case ${enable_targets} in
2998 *powerpc64*) maybe_biarch=yes ;;
2999 all) maybe_biarch=yes ;;
3001 case ${target}:${enable_targets}:${maybe_biarch} in
3002 powerpc64-* | powerpc-*:*:yes | *:*powerpc64-*:yes | *:all:yes \
3003 | powerpc64le*:*powerpcle* | powerpc64le*:*powerpc-* \
3004 | powerpcle-*:*powerpc64le*:yes)
3005 if test x$cpu_is_64bit = xyes; then
3006 tm_file="${tm_file} rs6000/default64.h"
3008 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h glibc-stdint.h"
3009 tmake_file="$tmake_file rs6000/t-linux64"
3012 tmake_file="$tmake_file rs6000/t-linux64le"
3013 case ${enable_targets} in
3014 all | *powerpc64-* | *powerpc-*)
3015 tmake_file="$tmake_file rs6000/t-linux64lebe" ;;
3018 case ${enable_targets} in
3019 all | *powerpc64le-* | *powerpcle-*)
3020 tmake_file="$tmake_file rs6000/t-linux64bele" ;;
3023 extra_options="${extra_options} rs6000/linux64.opt"
3026 tm_file="${tm_file} rs6000/default64.h rs6000/linux64.h glibc-stdint.h"
3027 extra_options="${extra_options} rs6000/linux64.opt"
3028 tmake_file="${tmake_file} rs6000/t-linux"
3031 tm_file="${tm_file} rs6000/linux.h glibc-stdint.h"
3032 tmake_file="${tmake_file} rs6000/t-ppcos rs6000/t-linux"
3036 powerpc*-*-linux*ppc476*)
3037 tm_file="${tm_file} rs6000/476.h"
3038 extra_options="${extra_options} rs6000/476.opt" ;;
3039 powerpc*-*-linux*altivec*)
3040 tm_file="${tm_file} rs6000/linuxaltivec.h" ;;
3044 enable_secureplt=yes ;;
3046 if test x${enable_secureplt} = xyes; then
3047 tm_file="rs6000/secureplt.h ${tm_file}"
3050 powerpc*-wrs-vxworks7r*)
3052 # Wind River 7 post SR0600 is mostly like Linux so we setup
3053 # our config in a very similar fashion and adjust to a few
3056 # The system compiler is configured with secureplt by default.
3057 tm_file="${tm_file} rs6000/secureplt.h"
3059 tm_file="${tm_file} elfos.h gnu-user.h linux.h freebsd-spec.h"
3060 tm_file="${tm_file} rs6000/sysv4.h rs6000/biarch64.h rs6000/default64.h rs6000/linux64.h"
3061 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
3063 extra_options="${extra_options} rs6000/sysv4.opt linux.opt rs6000/linux64.opt"
3065 tmake_file="${tmake_file} t-linux rs6000/t-linux64 rs6000/t-fprules rs6000/t-ppccomm"
3066 tmake_file="${tmake_file} rs6000/t-vxworks"
3068 tm_defines="$tm_defines DEFAULT_LIBC=LIBC_GLIBC"
3069 extra_objs="$extra_objs linux.o rs6000-linux.o"
3071 powerpc-wrs-vxworks*)
3072 tm_file="${tm_file} elfos.h gnu-user.h freebsd-spec.h rs6000/sysv4.h"
3073 tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
3074 extra_options="${extra_options} rs6000/sysv4.opt"
3075 extra_headers="${extra_headers} ppc-asm.h"
3078 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksmils.h"
3079 tmake_file="${tmake_file} rs6000/t-vxworksmils"
3082 tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
3083 tmake_file="${tmake_file} rs6000/t-vxworksae"
3086 tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
3092 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
3093 tmake_file="t-lynx rs6000/t-lynx"
3094 extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
3100 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h"
3101 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3102 extra_options="${extra_options} rs6000/sysv4.opt"
3104 powerpcle-*-eabisim*)
3105 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
3106 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3107 extra_options="${extra_options} rs6000/sysv4.opt"
3111 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h usegas.h freebsd-spec.h newlib-stdint.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
3112 tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
3113 extra_options="${extra_options} rs6000/sysv4.opt"
3117 tm_file="elfos.h newlib-stdint.h ${tm_file}"
3118 tmake_file="${tmake_file} pru/t-pru"
3119 extra_objs="pru-pragma.o pru-passes.o"
3122 rs6000-ibm-aix7.1.* | powerpc-ibm-aix7.1.*)
3123 tmake_file="rs6000/t-aix52 t-slibgcc"
3124 if test x$cpu_is_64bit = xyes; then
3125 tm_file="${tm_file} rs6000/biarch64.h"
3126 tmake_file="rs6000/t-aix64 t-slibgcc"
3128 tm_file="${tm_file} rs6000/aix.h rs6000/aix71.h rs6000/xcoff.h rs6000/aix-stdint.h"
3129 extra_options="${extra_options} rs6000/aix64.opt"
3133 default_use_cxa_atexit=yes
3135 rs6000-ibm-aix7.2.* | powerpc-ibm-aix7.2.*)
3136 tmake_file="rs6000/t-aix52 t-slibgcc"
3137 if test x$cpu_is_64bit = xyes; then
3138 tm_file="${tm_file} rs6000/biarch64.h"
3139 tmake_file="rs6000/t-aix64 t-slibgcc"
3141 tm_file="${tm_file} rs6000/aix.h rs6000/aix72.h rs6000/xcoff.h rs6000/aix-stdint.h"
3142 extra_options="${extra_options} rs6000/aix64.opt"
3146 default_use_cxa_atexit=yes
3148 rs6000-ibm-aix[789].* | powerpc-ibm-aix[789].*)
3149 tmake_file="rs6000/t-aix52 t-slibgcc"
3150 if test x$cpu_is_64bit = xyes; then
3151 tm_file="${tm_file} rs6000/biarch64.h"
3152 tmake_file="rs6000/t-aix64 t-slibgcc"
3154 tm_file="${tm_file} rs6000/aix.h rs6000/aix73.h rs6000/xcoff.h rs6000/aix-stdint.h"
3155 extra_options="${extra_options} rs6000/aix64.opt"
3159 default_use_cxa_atexit=yes
3162 tm_file="elfos.h newlib-stdint.h ${tm_file}"
3163 target_has_targetm_common=no
3164 c_target_objs="rl78-c.o"
3165 cxx_target_objs="rl78-c.o"
3166 tmake_file="${tmake_file} rl78/t-rl78"
3169 tm_file="dbxelf.h elfos.h newlib-stdint.h ${tm_file}"
3170 tmake_file="${tmake_file} rx/t-rx"
3171 extra_options="${extra_options} rx/elf.opt"
3174 tm_file="elfos.h linux.h glibc-stdint.h rx/linux.h ../../libgcc/config/rx/rx-abi.h"
3175 tmake_file="${tmake_file} rx/t-linux"
3178 tm_file="s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
3179 c_target_objs="${c_target_objs} s390-c.o"
3180 cxx_target_objs="${cxx_target_objs} s390-c.o"
3181 if test x$enable_targets = xall; then
3182 tmake_file="${tmake_file} s390/t-linux64"
3184 tmake_file="${tmake_file} s390/t-s390"
3187 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h gnu-user.h linux.h glibc-stdint.h s390/linux.h"
3188 tm_p_file="linux-protos.h s390/s390-protos.h"
3189 c_target_objs="${c_target_objs} s390-c.o"
3190 cxx_target_objs="${cxx_target_objs} s390-c.o"
3191 md_file=s390/s390.md
3192 extra_modes=s390/s390-modes.def
3193 out_file=s390/s390.cc
3194 tmake_file="${tmake_file} s390/t-linux64 s390/t-s390"
3197 tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h glibc-stdint.h s390/tpf.h"
3198 tm_p_file=s390/s390-protos.h
3199 c_target_objs="${c_target_objs} s390-c.o"
3200 cxx_target_objs="${cxx_target_objs} s390-c.o"
3201 md_file=s390/s390.md
3202 extra_modes=s390/s390-modes.def
3203 out_file=s390/s390.cc
3205 extra_options="${extra_options} s390/tpf.opt"
3206 tmake_file="${tmake_file} s390/t-s390"
3208 sh-*-elf* | sh[12346l]*-*-elf* | \
3209 sh-*-linux* | sh[2346lbe]*-*-linux* | \
3210 sh-*-netbsdelf* | shl*-*-netbsdelf*)
3211 tmake_file="${tmake_file} sh/t-sh sh/t-elf"
3212 if test x${with_endian} = x; then
3214 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
3215 shbe-*-* | sheb-*-*) with_endian=big,little ;;
3216 sh[1234]l* | sh[34]*-*-linux*) with_endian=little ;;
3217 shl* | sh*-*-linux* | \
3218 sh-superh-elf) with_endian=little,big ;;
3219 sh[1234]*-*-*) with_endian=big ;;
3220 *) with_endian=big,little ;;
3223 # TM_ENDIAN_CONFIG is used by t-sh to determine multilibs.
3224 # First word : the default endian.
3225 # Second word: the secondary endian (optional).
3226 case ${with_endian} in
3227 big) TM_ENDIAN_CONFIG=mb ;;
3228 little) TM_ENDIAN_CONFIG=ml ;;
3229 big,little) TM_ENDIAN_CONFIG="mb ml" ;;
3230 little,big) TM_ENDIAN_CONFIG="ml mb" ;;
3231 *) echo "with_endian=${with_endian} not supported."; exit 1 ;;
3233 case ${with_endian} in
3234 little*) tm_file="sh/little.h ${tm_file}" ;;
3236 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h"
3238 sh*-*-linux*) tmake_file="${tmake_file} sh/t-linux"
3239 if test x$enable_fdpic = xyes; then
3240 tm_defines="$tm_defines FDPIC_DEFAULT=1"
3242 tm_file="${tm_file} gnu-user.h linux.h glibc-stdint.h sh/linux.h" ;;
3244 tm_file="${tm_file} ${nbsd_tm_file} sh/netbsd-elf.h"
3245 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
3248 sh*-superh-elf) if test x$with_libgloss != xno; then
3250 tm_file="${tm_file} sh/newlib.h"
3252 tm_file="${tm_file} sh/embed-elf.h"
3253 tm_file="${tm_file} sh/superh.h"
3254 extra_options="${extra_options} sh/superh.opt" ;;
3255 *) if test x$with_newlib = xyes \
3256 && test x$with_libgloss = xyes; then
3257 tm_file="${tm_file} sh/newlib.h"
3259 tm_file="${tm_file} sh/embed-elf.h" ;;
3265 tm_file="${tm_file} newlib-stdint.h"
3268 # sed el/eb endian suffixes away to avoid confusion with sh[23]e
3269 case `echo ${target} | sed 's/e[lb]-/-/'` in
3270 sh4a_single_only*) sh_cpu_target=sh4a-single-only ;;
3271 sh4a_single*) sh_cpu_target=sh4a-single ;;
3272 sh4a_nofpu*) sh_cpu_target=sh4a-nofpu ;;
3273 sh4al) sh_cpu_target=sh4al ;;
3274 sh4a*) sh_cpu_target=sh4a ;;
3275 sh4_single_only*) sh_cpu_target=sh4-single-only ;;
3276 sh4_single*) sh_cpu_target=sh4-single ;;
3277 sh4_nofpu*) sh_cpu_target=sh4-nofpu ;;
3278 sh4* | sh-superh-*) sh_cpu_target=sh4 ;;
3279 sh3e*) sh_cpu_target=sh3e ;;
3280 sh*-*-netbsd* | sh3*) sh_cpu_target=sh3 ;;
3281 sh2a_single_only*) sh_cpu_target=sh2a-single-only ;;
3282 sh2a_single*) sh_cpu_target=sh2a-single ;;
3283 sh2a_nofpu*) sh_cpu_target=sh2a-nofpu ;;
3284 sh2a*) sh_cpu_target=sh2a ;;
3285 sh2e*) sh_cpu_target=sh2e ;;
3286 sh2*) sh_cpu_target=sh2 ;;
3287 *) sh_cpu_target=sh1 ;;
3289 # did the user say --without-fp ?
3290 if test x$with_fp = xno; then
3291 case ${sh_cpu_target} in
3293 sh4a* ) sh_cpu_target=sh4a-nofpu ;;
3294 sh4*) sh_cpu_target=sh4-nofpu ;;
3295 sh3*) sh_cpu_target=sh3 ;;
3296 sh2a*) sh_cpu_target=sh2a-nofpu ;;
3297 sh2*) sh_cpu_target=sh2 ;;
3298 *) echo --without-fp not available for $target: ignored
3300 tm_defines="$tm_defines STRICT_NOFPU=1"
3302 sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
3303 case $sh_cpu_default in
3304 sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
3305 sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
3306 sh4-single-only | sh4-single | sh4-nofpu | sh4 | sh4-300 | \
3307 sh3e | sh3 | sh2e | sh2 | sh1) ;;
3308 "") sh_cpu_default=${sh_cpu_target} ;;
3309 *) echo "with_cpu=$with_cpu not supported"; exit 1 ;;
3311 sh_multilibs=${with_multilib_list}
3312 if test "$sh_multilibs" = "default" ; then
3314 sh[1234]*) sh_multilibs=${sh_cpu_target} ;;
3315 sh-superh-*) sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
3316 sh*-*-linux*) sh_multilibs=m1,m2,m2a,m3e,m4 ;;
3317 sh*-*-netbsd*) sh_multilibs=m3,m3e,m4 ;;
3318 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
3320 if test x$with_fp = xno; then
3321 sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
3324 target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
3325 tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
3326 tm_defines="$tm_defines SUPPORT_`echo $sh_cpu_default | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
3327 sh_multilibs=`echo $sh_multilibs | sed -e 's/,/ /g' -e 's/^[Ss][Hh]/m/' -e 's/ [Ss][Hh]/ m/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
3328 for sh_multilib in ${sh_multilibs}; do
3329 case ${sh_multilib} in
3330 m1 | m2 | m2e | m3 | m3e | \
3331 m4 | m4-single | m4-single-only | m4-nofpu | m4-300 |\
3332 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al | \
3333 m2a | m2a-single | m2a-single-only | m2a-nofpu)
3334 # TM_MULTILIB_CONFIG is used by t-sh for the non-endian multilib definition
3335 # It is passed to MULTIILIB_OPTIONS verbatim.
3336 TM_MULTILIB_CONFIG="${TM_MULTILIB_CONFIG}/${sh_multilib}"
3337 tm_defines="$tm_defines SUPPORT_`echo $sh_multilib | sed 's/^m/sh/' | tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
3339 \!*) # TM_MULTILIB_EXCEPTIONS_CONFIG is used by t-sh
3340 # It is passed the MULTILIB_EXCEPTIONS verbatim.
3341 TM_MULTILIB_EXCEPTIONS_CONFIG="${TM_MULTILIB_EXCEPTIONS_CONFIG} `echo $sh_multilib | sed 's/^!//'`" ;;
3343 echo "with_multilib_list=${sh_multilib} not supported."
3348 TM_MULTILIB_CONFIG=`echo $TM_MULTILIB_CONFIG | sed 's:^/::'`
3349 if test x${enable_incomplete_targets} = xyes ; then
3350 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1"
3352 tm_file="$tm_file ./sysroot-suffix.h"
3353 tmake_file="$tmake_file t-sysroot-suffix"
3356 tmake_file="${tmake_file} sh/t-sh sh/t-rtems"
3357 tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h newlib-stdint.h"
3360 tmake_file="$tmake_file sh/t-sh sh/t-vxworks"
3361 tm_file="${tm_file} elfos.h sh/elf.h sh/embed-elf.h vx-common.h vxworks.h sh/vxworks.h"
3364 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp-elf.h"
3367 tmake_file="sparc/t-sparc sparc/t-leon"
3370 tmake_file="sparc/t-sparc sparc/t-leon3"
3373 tmake_file="sparc/t-sparc sparc/t-elf"
3378 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h newlib-stdint.h"
3379 tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems"
3382 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/tso.h"
3383 extra_options="${extra_options} sparc/long-double-switch.opt"
3386 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon"
3389 tmake_file="${tmake_file} sparc/t-sparc sparc/t-leon3"
3392 tmake_file="${tmake_file} sparc/t-sparc"
3395 if test x$enable_targets = xall; then
3396 tm_file="sparc/biarch64.h ${tm_file} sparc/linux64.h"
3397 tmake_file="${tmake_file} sparc/t-linux64"
3399 tm_file="${tm_file} sparc/linux.h"
3400 tmake_file="${tmake_file} sparc/t-linux"
3404 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
3405 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
3406 extra_options="${extra_options} sparc/long-double-switch.opt"
3407 tmake_file="${tmake_file} sparc/t-sparc"
3410 tm_file="sparc/biarch64.h ${tm_file} ${sol2_tm_file} sparc/tso.h"
3412 sparc64-*-* | sparcv9-*-*)
3413 tm_file="sparc/default64.h ${tm_file}"
3416 test x$with_cpu != x || with_cpu=v9
3419 tmake_file="${tmake_file} sparc/t-sparc sparc/t-sol2"
3422 tm_file="${tm_file} elfos.h sparc/sysv4.h vx-common.h vxworks.h sparc/vxworks.h"
3423 tmake_file="${tmake_file} sparc/t-sparc sparc/t-vxworks"
3426 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h"
3427 extra_options="${extra_options}"
3428 tmake_file="${tmake_file} sparc/t-sparc"
3431 tm_file="${tm_file} dbxelf.h elfos.h newlib-stdint.h sparc/sysv4.h sparc/sp64-elf.h sparc/rtemself.h rtems.h"
3432 extra_options="${extra_options}"
3433 tmake_file="${tmake_file} sparc/t-sparc sparc/t-rtems-64"
3436 tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h gnu-user.h linux.h glibc-stdint.h sparc/default64.h sparc/linux64.h sparc/tso.h"
3437 extra_options="${extra_options} sparc/long-double-switch.opt"
3438 tmake_file="${tmake_file} sparc/t-sparc sparc/t-linux64"
3440 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
3441 tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
3442 extra_options="${extra_options} sparc/long-double-switch.opt"
3443 case "x$with_cpu" in
3445 x) with_cpu=ultrasparc ;;
3446 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
3448 tmake_file="${tmake_file} sparc/t-sparc"
3451 tm_file="sparc/biarch64.h ${tm_file}"
3452 tm_file="${tm_file} dbxelf.h elfos.h sparc/sysv4.h ${nbsd_tm_file} sparc/netbsd-elf.h"
3453 extra_options="${extra_options} netbsd.opt netbsd-elf.opt"
3454 extra_options="${extra_options} sparc/long-double-switch.opt"
3455 tmake_file="${tmake_file} sparc/t-sparc sparc/t-netbsd64"
3458 tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/sp64-elf.h"
3459 tm_file="${tm_file} openbsd.h openbsd-stdint.h openbsd-libpthread.h sparc/openbsd64.h"
3460 extra_options="${extra_options} openbsd.opt"
3461 extra_options="${extra_options}"
3464 tmake_file="${tmake_file} sparc/t-sparc"
3467 tm_file="elfos.h ${tm_file} c6x/elf-common.h c6x/elf.h"
3468 tm_file="${tm_file} dbxelf.h tm-dwarf2.h newlib-stdint.h"
3469 tmake_file="c6x/t-c6x c6x/t-c6x-elf"
3473 tm_file="elfos.h ${tm_file} gnu-user.h linux.h c6x/elf-common.h c6x/uclinux-elf.h"
3474 tm_file="${tm_file} dbxelf.h tm-dwarf2.h glibc-stdint.h"
3475 tm_file="${tm_file} ./sysroot-suffix.h"
3476 tmake_file="t-sysroot-suffix t-slibgcc"
3477 tmake_file="${tmake_file} c6x/t-c6x c6x/t-c6x-elf c6x/t-c6x-uclinux"
3481 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilegx/linux.h ${tm_file}"
3482 tmake_file="${tmake_file} tilegx/t-tilegx"
3483 extra_objs="${extra_objs} mul-tables.o"
3484 c_target_objs="${c_target_objs} tilegx-c.o"
3485 cxx_target_objs="${cxx_target_objs} tilegx-c.o"
3486 extra_headers="feedback.h"
3489 tm_defines="${tm_defines} TARGET_BIG_ENDIAN_DEFAULT=1"
3494 tm_file="elfos.h gnu-user.h linux.h glibc-stdint.h tilepro/linux.h ${tm_file}"
3495 tmake_file="${tmake_file} tilepro/t-tilepro"
3496 extra_objs="${extra_objs} mul-tables.o"
3497 c_target_objs="${c_target_objs} tilepro-c.o"
3498 cxx_target_objs="${cxx_target_objs} tilepro-c.o"
3499 extra_headers="feedback.h"
3502 target_cpu_default="TARGET_CPU_generic"
3503 tm_file="elfos.h v850/v850.h"
3504 tm_file="${tm_file} v850/rtems.h rtems.h newlib-stdint.h"
3505 tmake_file="${tmake_file} v850/t-v850"
3506 tmake_file="${tmake_file} v850/t-rtems"
3508 c_target_objs="v850-c.o"
3509 cxx_target_objs="v850-c.o"
3514 target_cpu_default="TARGET_CPU_v850e3v5"
3517 target_cpu_default="TARGET_CPU_v850e2v3"
3520 target_cpu_default="TARGET_CPU_v850e2"
3522 v850e1-*-* | v850es-*-*)
3523 target_cpu_default="TARGET_CPU_v850e1"
3526 target_cpu_default="TARGET_CPU_v850e"
3529 target_cpu_default="TARGET_CPU_generic"
3532 tm_file="elfos.h newlib-stdint.h v850/v850.h"
3534 c_target_objs="v850-c.o"
3535 cxx_target_objs="v850-c.o"
3539 tm_file="${tm_file} dbxelf.h elfos.h gnu-user.h linux.h vax/elf.h vax/linux.h"
3540 extra_options="${extra_options} vax/elf.opt"
3543 tm_file="${tm_file} elfos.h ${nbsd_tm_file} vax/elf.h vax/netbsd-elf.h"
3544 extra_options="${extra_options} netbsd.opt netbsd-elf.opt vax/elf.opt"
3545 tm_defines="${tm_defines} CHAR_FAST8=1 SHORT_FAST16=1"
3548 tm_file="dbxelf.h elfos.h ${tm_file} visium/elf.h newlib-stdint.h"
3549 tmake_file="visium/t-visium visium/t-crtstuff"
3552 # For historical reasons, the target files omit the 'x'.
3553 tm_file="dbxelf.h elfos.h newlib-stdint.h stormy16/stormy16.h"
3554 tm_p_file=stormy16/stormy16-protos.h
3555 tm_d_file="elfos.h stormy16/stormy16.h"
3556 md_file=stormy16/stormy16.md
3557 out_file=stormy16/stormy16.cc
3558 extra_options=stormy16/stormy16.opt
3559 tmake_file="stormy16/t-stormy16"
3562 tm_file="${tm_file} elfos.h newlib-stdint.h xtensa/elf.h"
3563 extra_options="${extra_options} xtensa/elf.opt"
3566 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/linux.h"
3567 tmake_file="${tmake_file} xtensa/t-xtensa"
3570 tm_file="${tm_file} elfos.h gnu-user.h linux.h glibc-stdint.h xtensa/uclinux.h"
3571 tmake_file="${tmake_file} xtensa/t-xtensa"
3572 extra_options="${extra_options} xtensa/uclinux.opt"
3575 tm_file="mn10300/mn10300.h elfos.h gnu-user.h linux.h glibc-stdint.h mn10300/linux.h"
3580 tm_file="elfos.h ${tm_file} m32c/rtems.h rtems.h newlib-stdint.h"
3581 c_target_objs="m32c-pragma.o"
3582 cxx_target_objs="m32c-pragma.o"
3585 tm_file="elfos.h newlib-stdint.h ${tm_file}"
3586 c_target_objs="m32c-pragma.o"
3587 cxx_target_objs="m32c-pragma.o"
3590 echo "*** Configuration ${target} not supported" 1>&2
3596 i[34567]86-*-linux* | x86_64-*-linux*)
3597 tmake_file="${tmake_file} i386/t-pmm_malloc i386/t-i386"
3599 i[34567]86-*-* | x86_64-*-*)
3600 tmake_file="${tmake_file} i386/t-gmm_malloc i386/t-i386"
3602 powerpc*-*-* | rs6000-*-*)
3603 tm_file="${tm_file} ${cpu_type}/option-defaults.h"
3609 tmake_file="${tmake_file} t-musl"
3612 tmake_file="${tmake_file} t-uclibc"
3616 # Assume the existence of indirect function support and allow the use of the
3617 # resolver attribute.
3619 *-*-linux*android*|*-*-linux*uclibc*|*-*-linux*musl*)
3621 *-*-kfreebsd*-gnu | *-*-kopensolaris*-gnu)
3623 *-*-linux* | *-*-gnu*)
3625 aarch64*-* | arm*-* | i[34567]86-* | powerpc*-* | s390*-* | sparc*-* | x86_64-* | loongarch*-*)
3626 default_gnu_indirect_function=yes
3632 # Build mkoffload tool
3634 *-intelmic-* | *-intelmicemul-*)
3635 tmake_file="${tmake_file} i386/t-intelmic"
3636 tm_file="${tm_file} i386/intelmic-offload.h"
3640 if [ "$target_has_targetcm" = "no" ]; then
3641 c_target_objs="$c_target_objs default-c.o"
3642 cxx_target_objs="$cxx_target_objs default-c.o"
3645 if [ "$common_out_file" = "" ]; then
3646 if [ "$target_has_targetm_common" = "yes" ]; then
3647 common_out_file="$cpu_type/$cpu_type-common.cc"
3649 common_out_file="default-common.cc"
3653 if [ "$target_has_targetdm" = "no" ]; then
3654 d_target_objs="$d_target_objs default-d.o"
3657 # Support for --with-cpu and related options (and a few unrelated options,
3661 echo "--with-cpu must be passed a value" 1>&2
3666 # Set arch and cpu from ${target} and ${target_noncanonical}. Set cpu
3667 # to generic if there is no processor scheduler model for the target.
3670 arch_without_sse2=no
3671 arch_without_64bit=no
3674 if test $fbsd_major -ge 6; then
3680 arch_without_sse2=yes
3681 arch_without_64bit=yes
3686 arch_without_sse2=yes
3687 arch_without_64bit=yes
3692 arch_without_sse2=yes
3693 arch_without_64bit=yes
3698 arch_without_sse2=yes
3699 arch_without_64bit=yes
3702 arch_without_sse2=yes
3703 arch_without_64bit=yes
3704 case ${target_noncanonical} in
3717 pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
3727 i686-*-* | i786-*-*)
3728 case ${target_noncanonical} in
3765 amdfam10-*|barcelona-*)
3769 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
3773 k8-*|opteron-*|athlon64-*|athlon_fx-*)
3777 athlon_xp-*|athlon_mp-*|athlon_4-*)
3780 arch_without_sse2=yes
3781 arch_without_64bit=yes
3783 athlon_tbird-*|athlon-*)
3786 arch_without_sse2=yes
3791 arch_without_sse2=yes
3800 arch_without_sse2=yes
3802 pentium3-*|pentium3m-*)
3805 arch_without_sse2=yes
3807 pentium4-*|pentium4m-*)
3846 arch_without_sse2=yes
3851 arch_without_sse2=yes
3852 arch_without_64bit=yes
3857 case ${target_noncanonical} in
3894 amdfam10-*|barcelona-*)
3898 k8_sse3-*|opteron_sse3-*|athlon64_sse3-*)
3902 k8-*|opteron-*|athlon_64-*)
3938 # If there is no $with_cpu option, try to infer one from ${target}.
3939 # This block sets nothing except for with_cpu.
3940 if test x$with_cpu = x ; then
3942 i[34567]86-*-elfiamcu)
3945 i[34567]86-*-*|x86_64-*-*)
3963 frv-*-*linux* | frv400-*-*linux*)
3970 case "$with_arch" in
3972 with_cpu=${default_cf_cpu}
3975 with_cpu=m${default_m68k_cpu}
3991 with_cpu="`echo ${target} | sed 's/-.*$//'`"
4000 # Avoid overriding --with-cpu-32 and --with-cpu-64 values.
4002 i[34567]86-*-*|x86_64-*-*)
4003 if test x$with_cpu_32 != x || test x$with_cpu_64 != x; then
4004 if test x$with_cpu_32 = x; then
4005 with_cpu_32=$with_cpu
4007 if test x$with_cpu_64 = x; then
4008 with_cpu_64=$with_cpu
4016 # Support for --with-arch and related options (and a few unrelated options,
4018 case ${with_arch} in
4020 echo "--with-arch must be passed a value" 1>&2
4025 # If there is no $with_arch option, try to infer one from ${target}.
4026 # This block sets nothing except for with_arch.
4027 if test x$with_arch = x ; then
4029 i[34567]86-*-darwin*|x86_64-*-darwin*)
4030 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
4031 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
4033 i[34567]86-*-elfiamcu)
4037 # --with-fpmath sets the default ISA to SSE2, which is the same
4038 # ISA supported by Pentium 4.
4039 if test x$with_fpmath = x || test $arch_without_sse2 = no; then
4048 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4056 # Avoid overriding --with-arch-32 and --with-arch-64 values.
4058 i[34567]86-*-darwin*|x86_64-*-darwin*)
4059 # Default arch is set via TARGET_SUBTARGET32_ISA_DEFAULT
4060 # and TARGET_SUBTARGET64_ISA_DEFAULT in config/i386/darwin.h.
4062 i[34567]86-*-*|x86_64-*-*)
4063 if test x$with_arch_32 != x || test x$with_arch_64 != x; then
4064 if test x$with_arch_32 = x; then
4065 with_arch_32=$with_arch
4067 if test x$with_arch_64 = x; then
4068 if test $arch_without_64bit = yes; then
4069 # Set the default 64bit arch to x86-64 if the default arch
4070 # doesn't support 64bit.
4073 with_arch_64=$with_arch
4077 elif test $arch_without_64bit$need_64bit_isa = yesyes; then
4078 # Set the default 64bit arch to x86-64 if the default arch
4079 # doesn't support 64bit and we need 64bit ISA.
4080 with_arch_32=$with_arch
4088 # Infer a default setting for --with-float.
4089 if test x$with_float = x; then
4091 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4092 # The R5900 doesn't support 64-bit float. 32-bit float doesn't
4093 # comply with IEEE 754.
4099 # Infer a default setting for --with-fpu.
4100 if test x$with_fpu = x; then
4102 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4103 # The R5900 FPU only supports single precision.
4109 # Support --with-fpmath.
4110 if test x$with_fpmath != x; then
4112 i[34567]86-*-* | x86_64-*-*)
4113 case ${with_fpmath} in
4115 tm_file="${tm_file} i386/avxmath.h"
4118 tm_file="${tm_file} i386/ssemath.h"
4121 echo "Invalid --with-fpmath=$with_fpmath" 1>&2
4127 echo "--with-fpmath isn't supported for $target." 1>&2
4133 # Similarly for --with-schedule.
4134 if test x$with_schedule = x; then
4137 # Override default PA8000 scheduling model.
4138 with_schedule=7100LC
4143 # Infer a default setting for --with-llsc.
4144 if test x$with_llsc = x; then
4147 # The kernel emulates LL and SC where necessary.
4150 mips64r5900-*-* | mips64r5900el-*-* | mipsr5900-*-* | mipsr5900el-*-*)
4151 # The R5900 doesn't support LL(D) and SC(D).
4157 # Validate and mark as valid any --with options supported
4158 # by this target. In order to use a particular --with option
4159 # you must list it in supported_defaults; validating the value
4160 # is optional. This case statement should set nothing besides
4161 # supported_defaults.
4166 supported_defaults="abi cpu cpu_64 arch arch_64 tune tune_64"
4167 if test x$with_cpu_64 != x && test x$with_cpu = x; then
4168 with_cpu=$with_cpu_64
4170 if test x$with_arch_64 != x && test x$with_arch = x; then
4171 with_arch=$with_arch_64
4173 if test x$with_tune_64 != x && test x$with_tune = x; then
4174 with_tune=$with_tune_64
4176 for which in cpu arch tune; do
4177 eval "val=\$with_$which"
4178 base_val=`echo $val | sed -e 's/\+.*//'`
4179 ext_val=`echo $val | sed -e 's/[a-z0-9.-]\+//'`
4181 if [ $which = arch ]; then
4182 def=aarch64-arches.def
4183 pattern=AARCH64_ARCH
4185 def=aarch64-cores.def
4186 pattern=AARCH64_CORE
4189 # Find the base CPU or ARCH id in aarch64-cores.def or
4190 # aarch64-arches.def
4191 if [ x"$base_val" = x ] \
4192 || grep "^$pattern(\"$base_val\"," \
4193 ${srcdir}/config/aarch64/$def \
4196 # Disallow extensions in --with-tune=cortex-a53+crc.
4197 if [ $which = tune ] && [ x"$ext_val" != x ]; then
4198 echo "Architecture extensions not supported in --with-$which=$val" 1>&2
4202 # Use the pre-processor to strip flatten the options.
4203 # This makes the format less rigid than if we use
4204 # grep and sed directly here.
4205 opt_macro="AARCH64_OPT_EXTENSION(A, B, C, D, E, F)=A, B, C, D, E, F"
4206 options_parsed="`$ac_cv_prog_CPP -D"$opt_macro" -x c \
4207 ${srcdir}/config/aarch64/aarch64-option-extensions.def`"
4209 # Match one element inside AARCH64_OPT_EXTENSION, we
4210 # consume anything that's not a ,.
4211 elem="[ ]*\([^,]\+\)[ ]*"
4213 # Repeat the pattern for the number of entries in the
4214 # AARCH64_OPT_EXTENSION, currently 6 times.
4215 sed_patt="^$elem,$elem,$elem,$elem,$elem,$elem"
4217 while [ x"$ext_val" != x ]
4219 ext_val=`echo $ext_val | sed -e 's/\+//'`
4220 ext=`echo $ext_val | sed -e 's/\+.*//'`
4221 base_ext=`echo $ext | sed -e 's/^no//'`
4222 opt_line=`echo -e "$options_parsed" | \
4223 grep "^\"$base_ext\""`
4225 if [ x"$base_ext" = x ] \
4226 || [ x"$opt_line" != x ]; then
4229 echo "Unknown extension used in --with-$which=$val" 1>&2
4232 ext_val=`echo $ext_val | sed -e 's/[a-z0-9]\+//'`
4237 # Allow --with-$which=native.
4238 if [ "$val" = native ]; then
4241 echo "Unknown $which used in --with-$which=$val" 1>&2
4249 supported_defaults="cpu tune"
4250 for which in cpu tune; do
4251 eval "val=\$with_$which"
4254 | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
4255 | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
4259 echo "Unknown CPU used in --with-$which=$val" 1>&2
4267 supported_defaults="cpu fpu"
4270 if [ x"$with_cpu" = x ] \
4271 || grep -q -E "^ARC_CPU[[:blank:]]*\($with_cpu," \
4272 ${srcdir}/config/arc/arc-cpus.def
4277 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
4281 # see if --with-fpu matches any of the supported FPUs
4286 fpus | fpus_div | fpus_fma | fpus_all)
4290 fpuda | fpuda_div | fpuda_fma | fpuda_all)
4294 fpud | fpud_div | fpud_fma | fpud_all)
4299 echo "Unknown floating point type used in "\
4300 "--with-fpu=$with_fpu" 1>&2
4305 if [ -n "$flags_ok" ] \
4306 && ! grep -q -E "^ARC_CPU[[:blank:]]*\($new_cpu,[[:blank:]]*$flags_ok," \
4307 ${srcdir}/config/arc/arc-cpus.def
4309 echo "Unknown floating point type used in "\
4310 "--with-fpu=$with_fpu for cpu $new_cpu" 1>&2
4316 # Handle --with-multilib-list.
4317 if test "x${with_multilib_list}" != xdefault; then
4318 TM_MULTILIB_CONFIG="${with_multilib_list}"
4323 supported_defaults="cpu endian float"
4327 supported_defaults="arch cpu float tune fpu abi mode tls"
4328 for which in cpu tune arch; do
4329 # See if it matches a supported value
4330 eval "val=\$with_$which"
4331 if [ x"$val" != x ]; then
4332 cpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \
4333 -v cmd="chk$which $val" \
4334 ${srcdir}/config/arm/arm-cpus.in`
4335 if [ "$cpu" = "error" ]; then
4336 echo "Unknown target in --with-$which=$val" 1>&2
4340 eval "target_${which}_cname=$new_val"
4341 echo "For $val real value is $new_val"
4346 case "$with_float" in
4348 | soft | hard | softfp)
4352 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
4357 # see if --with-fpu matches any of the supported FPUs
4358 if [ x"$with_fpu" != x ] ; then
4360 fpu=`awk -f ${srcdir}/config/arm/parsecpu.awk \
4361 -v cmd="chkfpu $val" \
4362 ${srcdir}/config/arm/arm-cpus.in`
4363 if [ "$fpu" = "error" ]
4365 echo "Unknown target in --with-fpu=$val" 1>&2
4372 | apcs-gnu | atpcs | aapcs | iwmmxt | aapcs-linux )
4376 echo "Unknown ABI used in --with-abi=$with_abi"
4381 case "$with_mode" in
4387 echo "Unknown mode used in --with-mode=$with_mode"
4398 echo "Unknown TLS method used in --with-tls=$with_tls" 1>&2
4403 if test "x$with_arch" != x && test "x$with_cpu" != x; then
4404 echo "Switch \"--with-arch\" may not be used with switch \"--with-cpu\"" 1>&2
4408 if test "x$with_cpu" != x && test "x$with_tune" != x; then
4409 echo "Switch \"--with-tune\" may not be used with switch \"--with-cpu\"" 1>&2
4413 # Add extra multilibs
4414 if test "x$with_multilib_list" != x; then
4416 arm_multilibs=`echo $with_multilib_list | sed -e 's/,/ /g'`
4417 if test "x${arm_multilibs}" != xdefault ; then
4418 for arm_multilib in ${arm_multilibs}; do
4419 case ${arm_multilib} in
4421 tmake_profile_file="arm/t-multilib"
4424 ml=`echo "X$arm_multilib" | sed '1s,^X@,,'`
4425 if test -f "${srcdir}/config/arm/${ml}"; then
4426 tmake_file="${tmake_file} arm/${ml}"
4428 echo "Error: ${ml} does not exist in ${srcdir}/config/arm" >&2
4433 echo "Error: --with-multilib-list=${with_multilib_list} not supported." 1>&2
4440 if test "x${tmake_profile_file}" != x ; then
4441 # arm/t-aprofile and arm/t-rmprofile are only
4442 # designed to work without any with-cpu,
4443 # with-arch, with-mode, with-fpu or with-float
4445 if test "x$with_arch" != x \
4446 || test "x$with_cpu" != x \
4447 || test "x$with_float" != x \
4448 || test "x$with_fpu" != x \
4449 || test "x$with_mode" != x ; then
4450 echo "Error: You cannot use any of --with-arch/cpu/fpu/float/mode with --with-multilib-list=${with_multilib_list}" 1>&2
4452 elif test "x$ml" != x ; then
4453 echo "Error: You cannot use builtin multilib profiles along with custom ones" 1>&2
4456 # But pass the default value for float-abi
4457 # through to the multilib selector
4459 tmake_file="${tmake_file} ${tmake_profile_file}"
4460 TM_MULTILIB_CONFIG="$with_multilib_list"
4463 target_cpu_cname=${target_cpu_cname:-arm7tdmi}
4464 with_cpu=${with_cpu:-$target_cpu_cname}
4468 supported_defaults=cpu
4473 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
4479 fido-*-* | m68k*-*-*)
4480 supported_defaults="arch cpu"
4481 case "$with_arch" in
4483 m68k_arch_family="$with_arch"
4486 echo "Invalid --with-arch=$with_arch" 1>&2
4491 # We always have a $with_cpu setting here.
4493 "m68000" | "m68010" | "m68020" | "m68030" | "m68040" | "m68060")
4494 m68k_cpu_ident=$with_cpu
4497 m68k_cpu_ident=m68020
4498 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_40"
4501 m68k_cpu_ident=m68020
4502 tm_defines="$tm_defines M68K_DEFAULT_TUNE=u68020_60"
4505 # We need the C identifier rather than the string.
4506 m68k_cpu_ident=`awk -v arg="\"$with_cpu\"" \
4507 'BEGIN { FS="[ \t]*[,()][ \t]*" }; \
4508 $1 == "M68K_DEVICE" && $2 == arg { print $3 }' \
4509 ${srcdir}/config/m68k/m68k-devices.def`
4510 if [ x"$m68k_cpu_ident" = x ] ; then
4511 echo "Unknown CPU used in --with-cpu=$with_cpu" 1>&2
4514 with_cpu="mcpu=$with_cpu"
4520 supported_defaults="arch tune"
4522 for which in arch tune; do
4523 eval "val=\$with_$which"
4525 "" | fiji | gfx900 | gfx906 | gfx908 | gfx90a)
4529 echo "Unknown cpu used in --with-$which=$val." 1>&2
4534 [ "x$with_arch" = x ] && with_arch=fiji
4538 supported_defaults="arch schedule"
4540 case "$with_arch" in
4541 "" | 1.0 | 1.1 | 2.0)
4545 echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
4550 case "$with_schedule" in
4551 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
4555 echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
4561 i[34567]86-*-* | x86_64-*-*)
4562 supported_defaults="abi arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64"
4563 for which in arch arch_32 arch_64 cpu cpu_32 cpu_64 tune tune_32 tune_64; do
4564 eval "val=\$with_$which"
4565 case " $x86_archs " in
4573 echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
4582 if test x${val} != x; then
4583 case " $x86_64_archs " in
4585 # Disallow x86-64-v* for --with-cpu=/--with-tune=
4586 case "x$which$val" in
4587 xcpu*x86-64-v*|xtune*x86-64-v*)
4588 echo "Unknown CPU given in --with-$which=$val." 1>&2
4597 # Allow $x86_cpus --with-cpu=/--with-tune=
4600 case " $x86_cpus " in
4605 echo "Unknown CPU given in --with-$which=$val." 1>&2
4611 echo "Unknown CPU given in --with-$which=$val." 1>&2
4624 supported_defaults="abi arch tune riscv_attribute isa_spec"
4627 riscv-* | riscv32*) xlen=32 ;;
4628 riscv64*) xlen=64 ;;
4629 *) echo "Unsupported RISC-V target ${target}" 1>&2; exit 1 ;;
4632 case "${with_isa_spec}" in
4633 ""|default|20191213|201912)
4634 tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20191213"
4635 with_isa_spec=20191213
4638 tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_2P2"
4641 tm_defines="${tm_defines} TARGET_DEFAULT_ISA_SPEC=ISA_SPEC_CLASS_20190608"
4642 with_isa_spec=20190608
4645 echo "--with-isa-spec only accept 2.2, 20191213, 201912, 20190608 or 201906" 1>&2
4649 case "${with_riscv_attribute}" in
4651 tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1"
4654 tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=0"
4657 tm_defines="${tm_defines} TARGET_RISCV_ATTRIBUTE=1"
4660 echo "--with-riscv-attribute=${with_riscv_attribute} is not supported. The argument must begin with yes, no or default." 1>&2
4666 # Infer arch from --with-arch, --target, and --with-abi.
4667 case "${with_arch}" in
4668 rv32e* | rv32i* | rv32g* | rv64i* | rv64g*)
4672 # Infer XLEN, but otherwise assume GC.
4673 case "${with_abi}" in
4674 ilp32e) with_arch="rv32e" ;;
4675 ilp32 | ilp32f | ilp32d) with_arch="rv32gc" ;;
4676 lp64 | lp64f | lp64d) with_arch="rv64gc" ;;
4677 *) with_arch="rv${xlen}gc" ;;
4681 echo "--with-arch=${with_arch} is not supported. The argument must begin with rv32e, rv32i, rv32g, rv64i, or rv64g." 1>&2
4685 PYTHON=`which python || which python3 || which python2`
4686 if test "x${PYTHON}" != x; then
4687 with_arch=`${PYTHON} ${srcdir}/config/riscv/arch-canonicalize -misa-spec=${with_isa_spec} ${with_arch}`
4689 tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ARCH=${with_arch}"
4691 # Make sure --with-abi is valid. If it was not specified,
4692 # pick a default based on the ISA, preferring soft-float
4693 # unless the D extension is present.
4694 case "${with_abi}" in
4695 ilp32 | ilp32e | ilp32f | ilp32d | lp64 | lp64f | lp64d)
4698 case "${with_arch}" in
4699 rv32*d* | rv32g*) with_abi=ilp32d ;;
4700 rv32e*) with_abi=ilp32e ;;
4701 rv32*) with_abi=ilp32 ;;
4702 rv64*d* | rv64g*) with_abi=lp64d ;;
4703 rv64*) with_abi=lp64 ;;
4707 echo "--with-abi=${with_abi} is not supported" 1>&2
4711 tm_defines="${tm_defines} TARGET_RISCV_DEFAULT_ABI=${with_abi}"
4713 # Make sure ABI and ISA are compatible.
4714 case "${with_abi},${with_arch}" in
4715 ilp32,rv32* | ilp32e,rv32e* \
4716 | ilp32f,rv32*f* | ilp32f,rv32g* \
4717 | ilp32d,rv32*d* | ilp32d,rv32g* \
4719 | lp64f,rv64*f* | lp64f,rv64g* \
4720 | lp64d,rv64*d* | lp64d,rv64g*)
4723 echo "--with-abi=${with_abi} is not supported for ISA ${with_arch}" 1>&2
4727 # Handle --with-multilib-generator.
4728 if test "x${with_multilib_generator}" != xdefault; then
4729 if test "x${with_multilib_list}" != xdefault; then
4730 echo "--with-multilib-list= can't used with --with-multilib-generator= at same time" 1>&2
4735 if ${srcdir}/config/riscv/multilib-generator \
4736 -misa-spec=${with_isa_spec} \
4737 `echo ${with_multilib_generator} | sed 's/;/ /g'`\
4738 > t-multilib-config;
4740 tmake_file="${tmake_file} riscv/t-withmultilib-generator"
4742 echo "invalid option for --with-multilib-generator" 1>&2
4747 echo "--with-multilib-generator= is not supported for ${target}, only supported for riscv*-*-elf*" 1>&2
4753 # Handle --with-multilib-list.
4754 if test "x${with_multilib_list}" != xdefault; then
4755 tmake_file="${tmake_file} riscv/t-withmultilib"
4757 case ${with_multilib_list} in
4758 ilp32 | ilp32f | ilp32d \
4759 | lp64 | lp64f | lp64d )
4760 TM_MULTILIB_CONFIG="${with_arch},${with_multilib_list}"
4763 echo "--with-multilib-list=${with_multilib_list} not supported."
4770 supported_defaults="abi arch arch_32 arch_64 float fpu nan fp_32 odd_spreg_32 tune tune_32 tune_64 divide llsc mips-plt synci lxc1-sxc1 madd4"
4772 case ${with_float} in
4777 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
4783 "" | single | double)
4787 echo "Unknown fpu type used in --with-fpu=$with_fpu" 1>&2
4797 echo "Unknown NaN encoding used in --with-nan=$with_nan" 1>&2
4802 case ${with_fp_32} in
4807 echo "Unknown FP mode used in --with-fp-32=$with_fp_32" 1>&2
4812 case ${with_odd_spreg_32} in
4814 with_odd_spreg_32="odd-spreg"
4817 with_odd_spreg_32="no-odd-spreg"
4823 echo "Unknown odd-spreg-32 type used in --with-odd-spreg-32=$with_odd_spreg_32" 1>&2
4829 "" | 32 | o64 | n32 | 64 | eabi)
4833 echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
4838 case ${with_divide} in
4839 "" | breaks | traps)
4843 echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
4848 case ${with_llsc} in
4859 echo "Unknown llsc type used in --with-llsc" 1>&2
4864 case ${with_mips_plt} in
4869 with_mips_plt=no-plt
4874 echo "Unknown --with-mips-plt argument: $with_mips_plt" 1>&2
4879 case ${with_synci} in
4889 echo "Unknown synci type used in --with-synci" 1>&2
4894 case ${with_lxc1_sxc1} in
4896 with_lxc1_sxc1=lxc1-sxc1
4899 with_lxc1_sxc1=no-lxc1-sxc1
4904 echo "Unknown lxc1-sxc1 type used in --with-lxc1-sxc1" 1>&2
4909 case ${with_madd4} in
4919 echo "Unknown madd4 type used in --with-madd4" 1>&2
4926 supported_defaults="abi arch tune fpu"
4930 abi_pattern abi_default \
4931 abiext_pattern abiext_default \
4932 arch_pattern arch_default \
4933 fpu_pattern fpu_default \
4934 tune_pattern tune_default \
4935 triplet_os triplet_abi
4937 # Infer ABI from the triplet.
4939 loongarch64-*-*-*f64)
4943 loongarch64-*-*-*f32)
4947 loongarch64-*-*-*sf)
4952 abi_pattern="lp64[dfs]"
4957 echo "Unsupported target ${target}." 1>&2
4963 abiext_default="base"
4965 # Get the canonical triplet (multiarch specifier).
4967 *-linux-gnu*) triplet_os="linux-gnu";;
4968 *-linux-musl*) triplet_os="linux-musl";;
4970 echo "Unsupported target ${target}." 1>&2
4975 la_canonical_triplet="loongarch64-${triplet_os}${triplet_abi}"
4978 # Perform initial sanity checks on --with-* options.
4979 case ${with_arch} in
4980 "" | loongarch64 | la464) ;; # OK, append here.
4982 if test x${host} != x${target}; then
4983 echo "--with-arch=native is illegal for cross-compiler." 1>&2
4988 echo "Please set a default value for \${with_arch}" \
4989 "according to your target triplet \"${target}\"." 1>&2
4993 echo "Unknown arch in --with-arch=$with_arch" 1>&2
4999 "" | lp64d | lp64f | lp64s) ;; # OK, append here.
5001 echo "Unsupported ABI given in --with-abi=$with_abi" 1>&2
5006 case ${with_abiext} in
5007 "" | base) ;; # OK, append here.
5009 echo "Unsupported ABI extention type $with_abiext" 1>&2
5015 "" | none | 32 | 64) ;; # OK, append here.
5017 # Convert "0" to "none" for upcoming checks.
5021 echo "Unknown fpu type in --with-fpu=$with_fpu" 1>&2
5027 # Set default value for with_abi.
5030 if test x${abi_default} != x; then
5031 with_abi=${abi_default}
5033 with_abi=${abi_pattern}
5038 if echo "${with_abi}" | grep -E "^${abi_pattern}$" > /dev/null; then
5041 echo "Incompatible options:" \
5042 "--with-abi=${with_abi} and --target=${target}." 1>&2
5048 # Set default value for with_abiext (internal)
5049 case ${with_abiext} in
5051 if test x${abiext_default} != x; then
5052 with_abiext=${abiext_default}
5054 with_abiext=${abiext_pattern}
5059 if echo "${with_abiext}" | grep -E "^${abiext_pattern}$" > /dev/null; then
5062 echo "The ABI extension type \"${with_abiext}\"" \
5063 "is incompatible with --target=${target}." 1>&2
5070 # Infer ISA-related default options from the ABI: pass 1
5071 case ${with_abi}/${with_abiext} in
5073 # architectures that support lp64* ABI
5074 arch_pattern="native|loongarch64|la464"
5075 # default architecture for lp64* ABI
5076 arch_default="loongarch64"
5079 echo "Unsupported ABI type ${with_abi}/${with_abiext}." 1>&2
5084 # Infer ISA-related default options from the ABI: pass 2
5085 case ${with_abi}/${with_abiext} in
5094 fpu_pattern="none|32|64"
5098 echo "Unsupported ABI type ${with_abi}/${with_abiext}." 1>&2
5103 ## Set default value for with_arch.
5104 case ${with_arch} in
5106 if test x${arch_default} != x; then
5107 with_arch=${arch_default}
5109 with_arch=${arch_pattern}
5114 if echo "${with_arch}" | grep -E "^${arch_pattern}$" > /dev/null; then
5117 echo "${with_abi}/${with_abiext} ABI cannot be implemented with" \
5118 "--with-arch=${with_arch}." 1>&2
5124 ## Set default value for with_fpu.
5127 if test x${fpu_default} != x; then
5128 with_fpu=${fpu_default}
5130 with_fpu=${fpu_pattern}
5135 if echo "${with_fpu}" | grep -E "^${fpu_pattern}$" > /dev/null; then
5138 echo "${with_abi}/${with_abiext} ABI cannot be implemented with" \
5139 "--with-fpu=${with_fpu}." 1>&2
5146 # Infer default with_tune from with_arch: pass 1
5147 case ${with_arch} in
5150 tune_default="native"
5153 tune_pattern="loongarch64|la464"
5154 tune_default="la464"
5157 # By default, $with_tune == $with_arch
5158 tune_pattern="$with_arch"
5162 ## Set default value for with_tune.
5163 case ${with_tune} in
5165 if test x${tune_default} != x; then
5166 with_tune=${tune_default}
5168 with_tune=${tune_pattern}
5173 if echo "${with_tune}" | grep -E "^${tune_pattern}$" > /dev/null; then
5176 echo "Incompatible options: --with-tune=${with_tune}" \
5177 "and --with-arch=${with_arch}." 1>&2
5183 # Handle --with-multilib-list.
5184 if test x"${with_multilib_list}" = x \
5185 || test x"${with_multilib_list}" = xno \
5186 || test x"${with_multilib_list}" = xdefault \
5187 || test x"${enable_multilib}" != xyes; then
5189 with_multilib_list="${with_abi}/${with_abiext}"
5192 # Check if the configured default ABI combination is included in
5193 # ${with_multilib_list}.
5194 loongarch_multilib_list_sane=no
5196 # This one goes to TM_MULTILIB_CONFIG, for use in t-linux.
5197 loongarch_multilib_list_make=""
5199 # This one goes to tm_defines, for use in loongarch-driver.c.
5200 loongarch_multilib_list_c=""
5202 # ${with_multilib_list} should not contain whitespaces,
5203 # consecutive commas or slashes.
5204 if echo "${with_multilib_list}" \
5205 | grep -E -e "[[:space:]]" -e '[,/][,/]' -e '[,/]$' -e '^[,/]' > /dev/null; then
5206 echo "Invalid argument to --with-multilib-list." 1>&2
5210 unset component idx elem_abi_base elem_abi_ext elem_tmp
5211 for elem in $(echo "${with_multilib_list}" | tr ',' ' '); do
5215 component=$(echo "${elem}" | awk -F'/' '{print $'"${idx}"'}')
5219 # Component 1: Base ABI type
5220 case ${component} in
5221 lp64d) elem_tmp="ABI_BASE_LP64D,";;
5222 lp64f) elem_tmp="ABI_BASE_LP64F,";;
5223 lp64s) elem_tmp="ABI_BASE_LP64S,";;
5225 echo "Unknown base ABI \"${component}\" in --with-multilib-list." 1>&2
5229 loongarch_multilib_list_c="${loongarch_multilib_list_c}${elem_tmp}"
5230 loongarch_multilib_list_make="${loongarch_multilib_list_make}mabi=${component}"
5231 elem_abi_base="${component}"
5235 # Component 2: ABI extension type
5236 case ${component} in
5239 elem_tmp="ABI_EXT_BASE,"
5242 echo "Unknown ABI extension \"${component}\" in --with-multilib-list." 1>&2
5246 loongarch_multilib_list_c="${loongarch_multilib_list_c}${elem_tmp}"
5247 loongarch_multilib_list_make="${loongarch_multilib_list_make}" # Add nothing for now.
5248 elem_abi_ext="${component}"
5252 # Component 3 and on: optional stuff
5253 case ${component} in
5255 # End of component list.
5259 echo "Unknown ABI \"${elem}\" in --with-multilib-list." 1>&2
5267 if test x${elem_abi_base} = x${with_abi} \
5268 && test x${elem_abi_ext} = x${with_abiext}; then
5269 loongarch_multilib_list_sane=yes
5271 loongarch_multilib_list_make="${loongarch_multilib_list_make},"
5274 # Check if the default ABI combination is in the default list.
5275 if test x${loongarch_multilib_list_sane} = xno; then
5276 if test x${with_abiext} = xbase; then
5279 with_abiext="/${with_abiext}"
5282 echo "Default ABI combination (${with_abi}${with_abiext})" \
5283 "not found in --with-multilib-list." 1>&2
5287 # Remove the excessive appending comma.
5288 loongarch_multilib_list_c=${loongarch_multilib_list_c%,}
5289 loongarch_multilib_list_make=${loongarch_multilib_list_make%,}
5293 supported_defaults="arch cpu nds32_lib float fpu_config"
5295 # process --with-arch
5296 case "${with_arch}" in
5298 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0"
5302 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=0"
5305 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=1"
5308 tm_defines="${tm_defines} TARGET_ARCH_DEFAULT=2"
5312 echo "Cannot accept --with-arch=$with_arch, available values are: v2 v2j v3 v3m v3f v3s" 1>&2
5317 case "${with_cpu}" in
5321 n6 | n7 |n8 | e8 | s8 | n9 | n10 | d10 | n12 | n13 | n15)
5325 echo "Cannot accept --with-cpu=$with_cpu, available values are: n6 n7 n8 e8 s8 n9 n10 d10 n12 n13 n15" 1>&2
5330 # process --with-nds32-lib
5331 case "${with_nds32_lib}" in
5335 with_nds32_lib=ulibc
5338 with_nds32_lib=glibc
5341 with_nds32_lib=newlib
5342 tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1"
5348 tm_defines="${tm_defines} TARGET_DEFAULT_CTOR_DTOR=1"
5352 # for the arch=v3f or arch=v3s under mculib toolchain,
5353 # we would like to set -fno-math-errno as default
5354 case "${with_arch}" in
5356 tm_defines="${tm_defines} TARGET_DEFAULT_NO_MATH_ERRNO=1"
5364 echo "Cannot accept --with-nds32-lib=$with_nds32_lib, available values are: newlib mculib glibc uclibc" 1>&2
5369 # process --with-float
5370 case "${with_float}" in
5375 echo "Cannot accept --with-float=$with_float, available values are: soft hard" 1>&2
5380 # process --with-config-fpu
5381 case "${with_config_fpu}" in
5386 echo "Cannot accept --with-config-fpu=$with_config_fpu, available values from 0 to 7" 1>&2
5394 supported_defaults="arch"
5395 case "$with_arch" in
5400 echo "Unknown arch used in --with-arch=$with_arch" 1>&2
5406 powerpc*-*-* | rs6000-*-*)
5407 supported_defaults="abi cpu cpu_32 cpu_64 float tune tune_32 tune_64 advance_toolchain"
5409 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
5410 eval "val=\$with_$which"
5412 default32 | default64)
5417 echo "$val only valid for --with-cpu and --with-tune." 1>&2
5421 with_which="with_$which"
5425 tm_defines="${tm_defines} CONFIG_PPC405CR"
5426 eval "with_$which=405"
5428 "" | common | native \
5429 | power[3456789] | power10 | power5+ | power6x \
5430 | powerpc | powerpc64 | powerpc64le \
5432 | 401 | 403 | 405 | 405fp | 440 | 440fp | 464 | 464fp \
5433 | 476 | 476fp | 505 | 601 | 602 | 603 | 603e | ec603e \
5434 | 604 | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
5435 | a2 | e300c[23] | 854[08] | e500mc | e500mc64 | e5500 | e6500 \
5436 | titan | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5 | cell)
5440 echo "Unknown cpu used in --with-$which=$val." 1>&2
5447 "" | elfv1 | elfv2 )
5451 echo "Unknown ABI used in --with-abi=$with_abi"
5456 if test "x$with_advance_toolchain" != x; then
5457 if test -d "/opt/$with_advance_toolchain/." -a \
5458 -d "/opt/$with_advance_toolchain/bin/." -a \
5459 -d "/opt/$with_advance_toolchain/include/."; then
5461 tm_file="$tm_file ./advance-toolchain.h"
5462 (at="/opt/$with_advance_toolchain"
5463 echo "/* Use Advance Toolchain $at */"
5465 echo "#undef LINK_OS_NEW_DTAGS_SPEC"
5466 echo "#define LINK_OS_NEW_DTAGS_SPEC" \
5467 "\"--enable-new-dtags\""
5469 echo "#undef DYNAMIC_LINKER_PREFIX"
5470 echo "#define DYNAMIC_LINKER_PREFIX \"$at\""
5472 echo "#undef MD_EXEC_PREFIX"
5473 echo "#define MD_EXEC_PREFIX \"$at/bin/\""
5475 echo "#undef MD_STARTFILE_PREFIX"
5476 echo "#define MD_STARTFILE_PREFIX \"$prefix/lib/\""
5478 echo "#undef MD_STARTFILE_PREFIX_1"
5479 echo "#define MD_STARTFILE_PREFIX_1 \"$at/lib/\"") \
5480 > advance-toolchain.h
5482 echo "Unknown advance-toolchain $with_advance_toolchain"
5487 # Set up the default long double format if the user changed it.
5488 if test x$with_long_double_format = xieee; then
5489 tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=1"
5491 elif test x$with_long_double_format = xibm; then
5492 tm_defines="${tm_defines} TARGET_IEEEQUAD_DEFAULT=0"
5497 supported_defaults="arch mode tune"
5499 for which in arch tune; do
5500 eval "val=\$with_$which"
5502 "" | native | z900 | z990 | z9-109 | z9-ec | z10 | z196 | zEC12 | z13 | z14 | z15 | z16 | arch5 | arch6 | arch7 | arch8 | arch9 | arch10 | arch11 | arch12 | arch13 | arch14 )
5506 echo "Unknown cpu used in --with-$which=$val." 1>&2
5512 case ${with_mode} in
5517 echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
5523 sh[123456ble]*-*-* | sh-*-*)
5524 supported_defaults="cpu"
5525 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
5526 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
5529 m2a | m2a-single | m2a-single-only | m2a-nofpu)
5531 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
5534 echo "Unknown CPU used in --with-cpu=$with_cpu, known values:" 1>&2
5535 echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
5536 echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
5537 echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
5543 supported_defaults="cpu cpu_32 cpu_64 float tune tune_32 tune_64"
5545 for which in cpu cpu_32 cpu_64 tune tune_32 tune_64; do
5546 eval "val=\$with_$which"
5548 "" | sparc | sparcv9 | sparc64 \
5550 | v8 | supersparc | hypersparc | leon | leon3 | leon3v7 \
5551 | sparclite | f930 | f934 | sparclite86x \
5552 | sparclet | tsc701 \
5553 | v9 | ultrasparc | ultrasparc3 | niagara | niagara2 \
5554 | niagara3 | niagara4 | niagara7 | m8)
5558 echo "Unknown cpu used in --with-$which=$val" 1>&2
5564 case ${with_float} in
5569 echo "Unknown floating point type used in --with-float=$with_float" 1>&2
5576 supported_defaults="arch"
5578 case ${with_arch} in
5579 "" | c62x | c64x | c64x+ | c67x | c67x+ | c674x)
5583 echo "Unknown arch used in --with-arch=$with_arch." 1>&2
5590 supported_defaults=cpu
5592 "" | v850e | v850e1 | v850e2 | v850es | v850e2v3 | v850e3v5)
5596 echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
5602 supported_defaults="cpu"
5606 *) echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
5613 # Targets for which there is at least one VxWorks port should include
5614 # vxworks-dummy.h to allow safe references to various TARGET_VXWORKS kinds
5615 # of markers from other files in the port, including the vxworks*.h files to
5616 # distinguish VxWorks variants such as VxWorks 7 or 64).
5619 arm*-*-* | i[34567]86-*-* | mips*-*-* | powerpc*-*-* | sh*-*-* \
5620 | sparc*-*-* | x86_64-*-*)
5621 tm_file="vxworks-dummy.h ${tm_file}"
5625 # Set some miscellaneous flags for particular targets.
5626 target_cpu_default2=
5629 if test x"$target_cpu_cname" != x
5631 target_cpu_default2=$target_cpu_cname
5636 if test x$with_cpu = x
5638 echo "Don't know the target cpu" 1>&2
5641 target_cpu_default2="\\\"$with_cpu\\\""
5646 if test x$gas = xyes
5648 target_cpu_default2="MASK_GAS"
5652 fido*-*-* | m68k*-*-*)
5653 target_cpu_default2=$m68k_cpu_ident
5654 tmake_file="m68k/t-opts $tmake_file"
5655 if [ x"$m68k_arch_family" != x ]; then
5656 tmake_file="m68k/t-$m68k_arch_family $tmake_file"
5660 i[34567]86-*-darwin* | x86_64-*-darwin*)
5662 i[34567]86-*-linux* | x86_64-*-linux*)
5663 extra_objs="${extra_objs} gnu-property.o"
5664 tmake_file="$tmake_file i386/t-linux i386/t-gnu-property"
5666 i[34567]86-*-kfreebsd*-gnu | x86_64-*-kfreebsd*-gnu)
5667 tmake_file="$tmake_file i386/t-kfreebsd"
5670 tmake_file="$tmake_file i386/t-gnu"
5672 i[34567]86-*-msdosdjgpp*)
5673 tmake_file="${tmake_file} i386/t-djgpp"
5675 i[34567]86-*-solaris2* | x86_64-*-solaris2*)
5677 i[34567]86-*-cygwin* | x86_64-*-cygwin*)
5679 i[34567]86-*-mingw* | x86_64-*-mingw*)
5681 i[34567]86-*-dragonfly* | x86_64-*-dragonfly*)
5683 i[34567]86-*-freebsd*)
5686 tmake_file="${tmake_file} i386/t-freebsd64"
5692 if test x$gnu_ld = xyes
5694 target_cpu_default2="MASK_SPLIT_ADDRESSES"
5698 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
5701 if test x$with_arch != x; then
5702 default_mips_arch=$with_arch
5704 if test x$with_abi != x; then
5705 default_mips_abi=$with_abi
5707 case ${default_mips_arch} in
5708 mips1) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS1" ;;
5709 mips2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS2" ;;
5710 mips3) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS3" ;;
5711 mips4) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS4" ;;
5712 mips32) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32" ;;
5713 mips32r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R2" ;;
5714 mips32r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS32R6" ;;
5715 mips64) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64" ;;
5716 mips64r2) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R2" ;;
5717 mips64r6) tm_defines="$tm_defines MIPS_ISA_DEFAULT=MIPS_ISA_MIPS64R6" ;;
5719 case ${default_mips_abi} in
5720 32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_32" ;;
5721 o64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_O64" ;;
5722 n32) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_N32" ;;
5723 64) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_64" ;;
5724 eabi) tm_defines="$tm_defines MIPS_ABI_DEFAULT=ABI_EABI" ;;
5726 tmake_file="mips/t-mips $tmake_file"
5730 # Export canonical triplet.
5731 tm_defines="${tm_defines} LA_MULTIARCH_TRIPLET=${la_canonical_triplet}"
5733 # Define macro LA_DISABLE_MULTILIB if --disable-multilib
5734 tm_defines="${tm_defines} TM_MULTILIB_LIST=${loongarch_multilib_list_c}"
5735 if test x$enable_multilib = xyes; then
5736 TM_MULTILIB_CONFIG="${loongarch_multilib_list_make}"
5738 tm_defines="${tm_defines} LA_DISABLE_MULTILIB"
5741 # Let --with- flags initialize the enum variables from loongarch.opt.
5742 # See macro definitions from loongarch-opts.h and loongarch-cpu.h.
5743 case ${with_arch} in
5744 native) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_NATIVE" ;;
5745 la464) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_LA464" ;;
5746 loongarch64) tm_defines="${tm_defines} DEFAULT_CPU_ARCH=CPU_LOONGARCH64" ;;
5749 case ${with_tune} in
5750 native) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_NATIVE" ;;
5751 la464) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_LA464" ;;
5752 loongarch64) tm_defines="${tm_defines} DEFAULT_CPU_TUNE=CPU_LOONGARCH64" ;;
5756 lp64d) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64D" ;;
5757 lp64f) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64F" ;;
5758 lp64s) tm_defines="${tm_defines} DEFAULT_ABI_BASE=ABI_BASE_LP64S" ;;
5761 case ${with_abiext} in
5762 base) tm_defines="${tm_defines} DEFAULT_ABI_EXT=ABI_EXT_BASE" ;;
5766 none) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_NOFPU" ;;
5767 32) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU32" ;;
5768 64) tm_defines="$tm_defines DEFAULT_ISA_EXT_FPU=ISA_EXT_FPU64" ;;
5771 tmake_file="loongarch/t-loongarch $tmake_file"
5774 powerpc*-*-* | rs6000-*-*)
5775 # FIXME: The PowerPC port uses the value set at compile time,
5776 # although it's only cosmetic.
5777 if test "x$with_cpu" != x
5779 target_cpu_default2="\\\"$with_cpu\\\""
5781 out_file="${cpu_type}/${cpu_type}.cc"
5782 c_target_objs="${c_target_objs} ${cpu_type}-c.o"
5783 cxx_target_objs="${cxx_target_objs} ${cpu_type}-c.o"
5784 d_target_objs="${d_target_objs} ${cpu_type}-d.o"
5785 tmake_file="${cpu_type}/t-${cpu_type} ${tmake_file}"
5788 sh[123456ble]*-*-* | sh-*-*)
5789 c_target_objs="${c_target_objs} sh-c.o"
5790 cxx_target_objs="${cxx_target_objs} sh-c.o"
5794 # Some standard aliases.
5799 xsparcv9 | xsparc64)
5804 if test x$with_tune = x ; then
5815 # The SPARC port checks this value at compile-time.
5816 target_cpu_default2="TARGET_CPU_$with_cpu"
5820 case "x$with_cpu" in
5823 xv850e | xv850e1 | xv850e2 | xv850e2v3 | xv850e3v5)
5824 target_cpu_default2="TARGET_CPU_$with_cpu"
5827 target_cpu_default2="TARGET_CPU_v850e1"
5832 target_cpu_default2="TARGET_CPU_$with_cpu"
5837 all_defaults="abi cpu cpu_32 cpu_64 arch arch_32 arch_64 tune tune_32 tune_64 schedule float mode fpu nan fp_32 odd_spreg_32 divide llsc mips-plt synci tls lxc1-sxc1 madd4 isa_spec"
5838 for option in $all_defaults
5840 eval "val=\$with_"`echo $option | sed s/-/_/g`
5841 if test -n "$val"; then
5842 case " $supported_defaults " in
5846 echo "This target does not support --with-$option." 2>&1
5847 echo "Valid --with options are: $supported_defaults" 2>&1
5854 t="{ \"$option\", \"$val\" }"
5856 t="${t}, { \"$option\", \"$val\" }"
5863 configure_default_options="{ { NULL, NULL} }"
5865 configure_default_options="{ ${t} }"
5868 if test "$target_cpu_default2" != ""
5870 if test "$target_cpu_default" != ""
5872 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
5874 target_cpu_default=$target_cpu_default2
5879 i[34567]86-*-* | x86_64-*-*)
5880 if test x$enable_as_accelerator = xyes; then
5881 extra_programs="mkoffload\$(exeext)"