1 /* Parse C expressions for cpplib.
2 Copyright (C) 1987, 1992, 1994, 1995, 1997, 1998, 1999, 2000, 2001,
3 2002, 2004, 2008, 2009, 2010 Free Software Foundation.
4 Contributed by Per Bothner, 1994.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms of the GNU General Public License as published by the
8 Free Software Foundation; either version 3, or (at your option) any
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; see the file COPYING3. If not see
18 <http://www.gnu.org/licenses/>. */
25 #define PART_PRECISION (sizeof (cpp_num_part) * CHAR_BIT)
26 #define HALF_MASK (~(cpp_num_part) 0 >> (PART_PRECISION / 2))
27 #define LOW_PART(num_part) (num_part & HALF_MASK)
28 #define HIGH_PART(num_part) (num_part >> (PART_PRECISION / 2))
32 const cpp_token
*token
; /* The token forming op (for diagnostics). */
33 cpp_num value
; /* The value logically "right" of op. */
34 source_location loc
; /* The location of this value. */
38 /* Some simple utility routines on double integers. */
39 #define num_zerop(num) ((num.low | num.high) == 0)
40 #define num_eq(num1, num2) (num1.low == num2.low && num1.high == num2.high)
41 static bool num_positive (cpp_num
, size_t);
42 static bool num_greater_eq (cpp_num
, cpp_num
, size_t);
43 static cpp_num
num_trim (cpp_num
, size_t);
44 static cpp_num
num_part_mul (cpp_num_part
, cpp_num_part
);
46 static cpp_num
num_unary_op (cpp_reader
*, cpp_num
, enum cpp_ttype
);
47 static cpp_num
num_binary_op (cpp_reader
*, cpp_num
, cpp_num
, enum cpp_ttype
);
48 static cpp_num
num_negate (cpp_num
, size_t);
49 static cpp_num
num_bitwise_op (cpp_reader
*, cpp_num
, cpp_num
, enum cpp_ttype
);
50 static cpp_num
num_inequality_op (cpp_reader
*, cpp_num
, cpp_num
,
52 static cpp_num
num_equality_op (cpp_reader
*, cpp_num
, cpp_num
,
54 static cpp_num
num_mul (cpp_reader
*, cpp_num
, cpp_num
);
55 static cpp_num
num_div_op (cpp_reader
*, cpp_num
, cpp_num
, enum cpp_ttype
,
57 static cpp_num
num_lshift (cpp_num
, size_t, size_t);
58 static cpp_num
num_rshift (cpp_num
, size_t, size_t);
60 static cpp_num
append_digit (cpp_num
, int, int, size_t);
61 static cpp_num
parse_defined (cpp_reader
*);
62 static cpp_num
eval_token (cpp_reader
*, const cpp_token
*);
63 static struct op
*reduce (cpp_reader
*, struct op
*, enum cpp_ttype
);
64 static unsigned int interpret_float_suffix (const uchar
*, size_t);
65 static unsigned int interpret_int_suffix (const uchar
*, size_t);
66 static void check_promotion (cpp_reader
*, const struct op
*);
68 /* Token type abuse to create unary plus and minus operators. */
69 #define CPP_UPLUS ((enum cpp_ttype) (CPP_LAST_CPP_OP + 1))
70 #define CPP_UMINUS ((enum cpp_ttype) (CPP_LAST_CPP_OP + 2))
72 /* With -O2, gcc appears to produce nice code, moving the error
73 message load and subsequent jump completely out of the main path. */
74 #define SYNTAX_ERROR(msgid) \
75 do { cpp_error (pfile, CPP_DL_ERROR, msgid); goto syntax_error; } while(0)
76 #define SYNTAX_ERROR2(msgid, arg) \
77 do { cpp_error (pfile, CPP_DL_ERROR, msgid, arg); goto syntax_error; } \
80 /* Subroutine of cpp_classify_number. S points to a float suffix of
81 length LEN, possibly zero. Returns 0 for an invalid suffix, or a
82 flag vector describing the suffix. */
84 interpret_float_suffix (const uchar
*s
, size_t len
)
87 size_t f
, d
, l
, w
, q
, i
;
90 f
= d
= l
= w
= q
= i
= 0;
92 /* Process decimal float suffixes, which are two letters starting
93 with d or D. Order and case are significant. */
94 if (len
== 2 && (*s
== 'd' || *s
== 'D'))
96 bool uppercase
= (*s
== 'D');
99 case 'f': return (!uppercase
? (CPP_N_DFLOAT
| CPP_N_SMALL
): 0); break;
100 case 'F': return (uppercase
? (CPP_N_DFLOAT
| CPP_N_SMALL
) : 0); break;
101 case 'd': return (!uppercase
? (CPP_N_DFLOAT
| CPP_N_MEDIUM
): 0); break;
102 case 'D': return (uppercase
? (CPP_N_DFLOAT
| CPP_N_MEDIUM
) : 0); break;
103 case 'l': return (!uppercase
? (CPP_N_DFLOAT
| CPP_N_LARGE
) : 0); break;
104 case 'L': return (uppercase
? (CPP_N_DFLOAT
| CPP_N_LARGE
) : 0); break;
106 /* Additional two-character suffixes beginning with D are not
107 for decimal float constants. */
112 /* Recognize a fixed-point suffix. */
115 case 'k': case 'K': flags
= CPP_N_ACCUM
; break;
116 case 'r': case 'R': flags
= CPP_N_FRACT
; break;
120 /* Continue processing a fixed-point suffix. The suffix is case
121 insensitive except for ll or LL. Order is significant. */
128 if (*s
== 'u' || *s
== 'U')
130 flags
|= CPP_N_UNSIGNED
;
141 return flags
|= CPP_N_SMALL
;
145 return flags
|= CPP_N_MEDIUM
;
146 if (len
== 2 && s
[1] == 'l')
147 return flags
|= CPP_N_LARGE
;
151 return flags
|= CPP_N_MEDIUM
;
152 if (len
== 2 && s
[1] == 'L')
153 return flags
|= CPP_N_LARGE
;
158 /* Anything left at this point is invalid. */
162 /* In any remaining valid suffix, the case and order don't matter. */
166 case 'f': case 'F': f
++; break;
167 case 'd': case 'D': d
++; break;
168 case 'l': case 'L': l
++; break;
169 case 'w': case 'W': w
++; break;
170 case 'q': case 'Q': q
++; break;
172 case 'j': case 'J': i
++; break;
177 if (f
+ d
+ l
+ w
+ q
> 1 || i
> 1)
180 return ((i
? CPP_N_IMAGINARY
: 0)
185 q
? CPP_N_MD_Q
: CPP_N_DEFAULT
));
188 /* Subroutine of cpp_classify_number. S points to an integer suffix
189 of length LEN, possibly zero. Returns 0 for an invalid suffix, or a
190 flag vector describing the suffix. */
192 interpret_int_suffix (const uchar
*s
, size_t len
)
201 case 'u': case 'U': u
++; break;
203 case 'j': case 'J': i
++; break;
204 case 'l': case 'L': l
++;
205 /* If there are two Ls, they must be adjacent and the same case. */
206 if (l
== 2 && s
[len
] != s
[len
+ 1])
213 if (l
> 2 || u
> 1 || i
> 1)
216 return ((i
? CPP_N_IMAGINARY
: 0)
217 | (u
? CPP_N_UNSIGNED
: 0)
218 | ((l
== 0) ? CPP_N_SMALL
219 : (l
== 1) ? CPP_N_MEDIUM
: CPP_N_LARGE
));
222 /* Categorize numeric constants according to their field (integer,
223 floating point, or invalid), radix (decimal, octal, hexadecimal),
224 and type suffixes. */
226 cpp_classify_number (cpp_reader
*pfile
, const cpp_token
*token
)
228 const uchar
*str
= token
->val
.str
.text
;
230 unsigned int max_digit
, result
, radix
;
231 enum {NOT_FLOAT
= 0, AFTER_POINT
, AFTER_EXPON
} float_flag
;
234 /* If the lexer has done its job, length one can only be a single
235 digit. Fast-path this very common case. */
236 if (token
->val
.str
.len
== 1)
237 return CPP_N_INTEGER
| CPP_N_SMALL
| CPP_N_DECIMAL
;
239 limit
= str
+ token
->val
.str
.len
;
240 float_flag
= NOT_FLOAT
;
245 /* First, interpret the radix. */
251 /* Require at least one hex digit to classify it as hex. */
252 if ((*str
== 'x' || *str
== 'X')
253 && (str
[1] == '.' || ISXDIGIT (str
[1])))
258 else if ((*str
== 'b' || *str
== 'B') && (str
[1] == '0' || str
[1] == '1'))
265 /* Now scan for a well-formed integer or float. */
268 unsigned int c
= *str
++;
270 if (ISDIGIT (c
) || (ISXDIGIT (c
) && radix
== 16))
279 if (float_flag
== NOT_FLOAT
)
280 float_flag
= AFTER_POINT
;
282 SYNTAX_ERROR ("too many decimal points in number");
284 else if ((radix
<= 10 && (c
== 'e' || c
== 'E'))
285 || (radix
== 16 && (c
== 'p' || c
== 'P')))
287 float_flag
= AFTER_EXPON
;
292 /* Start of suffix. */
298 /* The suffix may be for decimal fixed-point constants without exponent. */
299 if (radix
!= 16 && float_flag
== NOT_FLOAT
)
301 result
= interpret_float_suffix (str
, limit
- str
);
302 if ((result
& CPP_N_FRACT
) || (result
& CPP_N_ACCUM
))
304 result
|= CPP_N_FLOATING
;
305 /* We need to restore the radix to 10, if the radix is 8. */
309 if (CPP_PEDANTIC (pfile
))
310 cpp_error (pfile
, CPP_DL_PEDWARN
,
311 "fixed-point constants are a GCC extension");
318 if (float_flag
!= NOT_FLOAT
&& radix
== 8)
321 if (max_digit
>= radix
)
324 SYNTAX_ERROR2 ("invalid digit \"%c\" in binary constant", '0' + max_digit
);
326 SYNTAX_ERROR2 ("invalid digit \"%c\" in octal constant", '0' + max_digit
);
329 if (float_flag
!= NOT_FLOAT
)
333 cpp_error (pfile
, CPP_DL_ERROR
,
334 "invalid prefix \"0b\" for floating constant");
335 return CPP_N_INVALID
;
338 if (radix
== 16 && !seen_digit
)
339 SYNTAX_ERROR ("no digits in hexadecimal floating constant");
341 if (radix
== 16 && CPP_PEDANTIC (pfile
) && !CPP_OPTION (pfile
, c99
))
342 cpp_error (pfile
, CPP_DL_PEDWARN
,
343 "use of C99 hexadecimal floating constant");
345 if (float_flag
== AFTER_EXPON
)
347 if (*str
== '+' || *str
== '-')
350 /* Exponent is decimal, even if string is a hex float. */
352 SYNTAX_ERROR ("exponent has no digits");
356 while (ISDIGIT (*str
));
358 else if (radix
== 16)
359 SYNTAX_ERROR ("hexadecimal floating constants require an exponent");
361 result
= interpret_float_suffix (str
, limit
- str
);
364 cpp_error (pfile
, CPP_DL_ERROR
,
365 "invalid suffix \"%.*s\" on floating constant",
366 (int) (limit
- str
), str
);
367 return CPP_N_INVALID
;
370 /* Traditional C didn't accept any floating suffixes. */
372 && CPP_WTRADITIONAL (pfile
)
373 && ! cpp_sys_macro_p (pfile
))
374 cpp_warning (pfile
, CPP_W_TRADITIONAL
,
375 "traditional C rejects the \"%.*s\" suffix",
376 (int) (limit
- str
), str
);
378 /* A suffix for double is a GCC extension via decimal float support.
379 If the suffix also specifies an imaginary value we'll catch that
381 if ((result
== CPP_N_MEDIUM
) && CPP_PEDANTIC (pfile
))
382 cpp_error (pfile
, CPP_DL_PEDWARN
,
383 "suffix for double constant is a GCC extension");
385 /* Radix must be 10 for decimal floats. */
386 if ((result
& CPP_N_DFLOAT
) && radix
!= 10)
388 cpp_error (pfile
, CPP_DL_ERROR
,
389 "invalid suffix \"%.*s\" with hexadecimal floating constant",
390 (int) (limit
- str
), str
);
391 return CPP_N_INVALID
;
394 if ((result
& (CPP_N_FRACT
| CPP_N_ACCUM
)) && CPP_PEDANTIC (pfile
))
395 cpp_error (pfile
, CPP_DL_PEDWARN
,
396 "fixed-point constants are a GCC extension");
398 if ((result
& CPP_N_DFLOAT
) && CPP_PEDANTIC (pfile
))
399 cpp_error (pfile
, CPP_DL_PEDWARN
,
400 "decimal float constants are a GCC extension");
402 result
|= CPP_N_FLOATING
;
406 result
= interpret_int_suffix (str
, limit
- str
);
409 cpp_error (pfile
, CPP_DL_ERROR
,
410 "invalid suffix \"%.*s\" on integer constant",
411 (int) (limit
- str
), str
);
412 return CPP_N_INVALID
;
415 /* Traditional C only accepted the 'L' suffix.
416 Suppress warning about 'LL' with -Wno-long-long. */
417 if (CPP_WTRADITIONAL (pfile
) && ! cpp_sys_macro_p (pfile
))
419 int u_or_i
= (result
& (CPP_N_UNSIGNED
|CPP_N_IMAGINARY
));
420 int large
= (result
& CPP_N_WIDTH
) == CPP_N_LARGE
421 && CPP_OPTION (pfile
, cpp_warn_long_long
);
424 cpp_warning (pfile
, large
? CPP_W_LONG_LONG
: CPP_W_TRADITIONAL
,
425 "traditional C rejects the \"%.*s\" suffix",
426 (int) (limit
- str
), str
);
429 if ((result
& CPP_N_WIDTH
) == CPP_N_LARGE
430 && CPP_OPTION (pfile
, cpp_warn_long_long
))
432 const char *message
= CPP_OPTION (pfile
, cplusplus
)
433 ? N_("use of C++0x long long integer constant")
434 : N_("use of C99 long long integer constant");
436 if (CPP_OPTION (pfile
, c99
))
437 cpp_warning (pfile
, CPP_W_LONG_LONG
, message
);
439 cpp_pedwarning (pfile
, CPP_W_LONG_LONG
, message
);
442 result
|= CPP_N_INTEGER
;
446 if ((result
& CPP_N_IMAGINARY
) && CPP_PEDANTIC (pfile
))
447 cpp_error (pfile
, CPP_DL_PEDWARN
,
448 "imaginary constants are a GCC extension");
449 if (radix
== 2 && CPP_PEDANTIC (pfile
))
450 cpp_error (pfile
, CPP_DL_PEDWARN
,
451 "binary constants are a GCC extension");
454 result
|= CPP_N_DECIMAL
;
455 else if (radix
== 16)
458 result
|= CPP_N_BINARY
;
460 result
|= CPP_N_OCTAL
;
465 return CPP_N_INVALID
;
468 /* cpp_interpret_integer converts an integer constant into a cpp_num,
469 of precision options->precision.
471 We do not provide any interface for decimal->float conversion,
472 because the preprocessor doesn't need it and we don't want to
473 drag in GCC's floating point emulator. */
475 cpp_interpret_integer (cpp_reader
*pfile
, const cpp_token
*token
,
478 const uchar
*p
, *end
;
483 result
.unsignedp
= !!(type
& CPP_N_UNSIGNED
);
484 result
.overflow
= false;
486 p
= token
->val
.str
.text
;
487 end
= p
+ token
->val
.str
.len
;
489 /* Common case of a single digit. */
490 if (token
->val
.str
.len
== 1)
491 result
.low
= p
[0] - '0';
495 size_t precision
= CPP_OPTION (pfile
, precision
);
496 unsigned int base
= 10, c
= 0;
497 bool overflow
= false;
499 if ((type
& CPP_N_RADIX
) == CPP_N_OCTAL
)
504 else if ((type
& CPP_N_RADIX
) == CPP_N_HEX
)
509 else if ((type
& CPP_N_RADIX
) == CPP_N_BINARY
)
515 /* We can add a digit to numbers strictly less than this without
516 needing the precision and slowness of double integers. */
517 max
= ~(cpp_num_part
) 0;
518 if (precision
< PART_PRECISION
)
519 max
>>= PART_PRECISION
- precision
;
520 max
= (max
- base
+ 1) / base
+ 1;
526 if (ISDIGIT (c
) || (base
== 16 && ISXDIGIT (c
)))
531 /* Strict inequality for when max is set to zero. */
532 if (result
.low
< max
)
533 result
.low
= result
.low
* base
+ c
;
536 result
= append_digit (result
, c
, base
, precision
);
537 overflow
|= result
.overflow
;
543 cpp_error (pfile
, CPP_DL_PEDWARN
,
544 "integer constant is too large for its type");
545 /* If too big to be signed, consider it unsigned. Only warn for
546 decimal numbers. Traditional numbers were always signed (but
547 we still honor an explicit U suffix); but we only have
548 traditional semantics in directives. */
549 else if (!result
.unsignedp
550 && !(CPP_OPTION (pfile
, traditional
)
551 && pfile
->state
.in_directive
)
552 && !num_positive (result
, precision
))
554 /* This is for constants within the range of uintmax_t but
555 not that of intmax_t. For such decimal constants, a
556 diagnostic is required for C99 as the selected type must
557 be signed and not having a type is a constraint violation
558 (DR#298, TC3), so this must be a pedwarn. For C90,
559 unsigned long is specified to be used for a constant that
560 does not fit in signed long; if uintmax_t has the same
561 range as unsigned long this means only a warning is
562 appropriate here. C90 permits the preprocessor to use a
563 wider range than unsigned long in the compiler, so if
564 uintmax_t is wider than unsigned long no diagnostic is
565 required for such constants in preprocessor #if
566 expressions and the compiler will pedwarn for such
567 constants outside the range of unsigned long that reach
568 the compiler so a diagnostic is not required there
569 either; thus, pedwarn for C99 but use a plain warning for
572 cpp_error (pfile
, (CPP_OPTION (pfile
, c99
)
575 "integer constant is so large that it is unsigned");
576 result
.unsignedp
= true;
583 /* Append DIGIT to NUM, a number of PRECISION bits being read in base BASE. */
585 append_digit (cpp_num num
, int digit
, int base
, size_t precision
)
590 cpp_num_part add_high
, add_low
;
592 /* Multiply by 2, 8 or 16. Catching this overflow here means we don't
593 need to worry about add_high overflowing. */
607 overflow
= !!(num
.high
>> (PART_PRECISION
- shift
));
608 result
.high
= num
.high
<< shift
;
609 result
.low
= num
.low
<< shift
;
610 result
.high
|= num
.low
>> (PART_PRECISION
- shift
);
611 result
.unsignedp
= num
.unsignedp
;
615 add_low
= num
.low
<< 1;
616 add_high
= (num
.high
<< 1) + (num
.low
>> (PART_PRECISION
- 1));
619 add_high
= add_low
= 0;
621 if (add_low
+ digit
< add_low
)
625 if (result
.low
+ add_low
< result
.low
)
627 if (result
.high
+ add_high
< result
.high
)
630 result
.low
+= add_low
;
631 result
.high
+= add_high
;
632 result
.overflow
= overflow
;
634 /* The above code catches overflow of a cpp_num type. This catches
635 overflow of the (possibly shorter) target precision. */
636 num
.low
= result
.low
;
637 num
.high
= result
.high
;
638 result
= num_trim (result
, precision
);
639 if (!num_eq (result
, num
))
640 result
.overflow
= true;
645 /* Handle meeting "defined" in a preprocessor expression. */
647 parse_defined (cpp_reader
*pfile
)
651 cpp_hashnode
*node
= 0;
652 const cpp_token
*token
;
653 cpp_context
*initial_context
= pfile
->context
;
655 /* Don't expand macros. */
656 pfile
->state
.prevent_expansion
++;
658 token
= cpp_get_token (pfile
);
659 if (token
->type
== CPP_OPEN_PAREN
)
662 token
= cpp_get_token (pfile
);
665 if (token
->type
== CPP_NAME
)
667 node
= token
->val
.node
.node
;
668 if (paren
&& cpp_get_token (pfile
)->type
!= CPP_CLOSE_PAREN
)
670 cpp_error (pfile
, CPP_DL_ERROR
, "missing ')' after \"defined\"");
676 cpp_error (pfile
, CPP_DL_ERROR
,
677 "operator \"defined\" requires an identifier");
678 if (token
->flags
& NAMED_OP
)
683 op
.type
= token
->type
;
684 cpp_error (pfile
, CPP_DL_ERROR
,
685 "(\"%s\" is an alternative token for \"%s\" in C++)",
686 cpp_token_as_text (pfile
, token
),
687 cpp_token_as_text (pfile
, &op
));
693 if (pfile
->context
!= initial_context
&& CPP_PEDANTIC (pfile
))
694 cpp_error (pfile
, CPP_DL_WARNING
,
695 "this use of \"defined\" may not be portable");
697 _cpp_mark_macro_used (node
);
698 if (!(node
->flags
& NODE_USED
))
700 node
->flags
|= NODE_USED
;
701 if (node
->type
== NT_MACRO
)
703 if ((node
->flags
& NODE_BUILTIN
)
704 && pfile
->cb
.user_builtin_macro
)
705 pfile
->cb
.user_builtin_macro (pfile
, node
);
706 if (pfile
->cb
.used_define
)
707 pfile
->cb
.used_define (pfile
, pfile
->directive_line
, node
);
711 if (pfile
->cb
.used_undef
)
712 pfile
->cb
.used_undef (pfile
, pfile
->directive_line
, node
);
716 /* A possible controlling macro of the form #if !defined ().
717 _cpp_parse_expr checks there was no other junk on the line. */
718 pfile
->mi_ind_cmacro
= node
;
721 pfile
->state
.prevent_expansion
--;
723 /* Do not treat conditional macros as being defined. This is due to the
724 powerpc and spu ports using conditional macros for 'vector', 'bool', and
725 'pixel' to act as conditional keywords. This messes up tests like #ifndef
727 result
.unsignedp
= false;
729 result
.overflow
= false;
730 result
.low
= (node
&& node
->type
== NT_MACRO
731 && (node
->flags
& NODE_CONDITIONAL
) == 0);
735 /* Convert a token into a CPP_NUMBER (an interpreted preprocessing
736 number or character constant, or the result of the "defined" or "#"
739 eval_token (cpp_reader
*pfile
, const cpp_token
*token
)
745 result
.unsignedp
= false;
746 result
.overflow
= false;
751 temp
= cpp_classify_number (pfile
, token
);
752 switch (temp
& CPP_N_CATEGORY
)
755 cpp_error (pfile
, CPP_DL_ERROR
,
756 "floating constant in preprocessor expression");
759 if (!(temp
& CPP_N_IMAGINARY
))
760 return cpp_interpret_integer (pfile
, token
, temp
);
761 cpp_error (pfile
, CPP_DL_ERROR
,
762 "imaginary number in preprocessor expression");
766 /* Error already issued. */
769 result
.high
= result
.low
= 0;
777 cppchar_t cc
= cpp_interpret_charconst (pfile
, token
,
782 /* Sign-extend the result if necessary. */
783 if (!unsignedp
&& (cppchar_signed_t
) cc
< 0)
785 if (PART_PRECISION
> BITS_PER_CPPCHAR_T
)
786 result
.low
|= ~(~(cpp_num_part
) 0
787 >> (PART_PRECISION
- BITS_PER_CPPCHAR_T
));
788 result
.high
= ~(cpp_num_part
) 0;
789 result
= num_trim (result
, CPP_OPTION (pfile
, precision
));
795 if (token
->val
.node
.node
== pfile
->spec_nodes
.n_defined
)
796 return parse_defined (pfile
);
797 else if (CPP_OPTION (pfile
, cplusplus
)
798 && (token
->val
.node
.node
== pfile
->spec_nodes
.n_true
799 || token
->val
.node
.node
== pfile
->spec_nodes
.n_false
))
802 result
.low
= (token
->val
.node
.node
== pfile
->spec_nodes
.n_true
);
808 if (CPP_OPTION (pfile
, warn_undef
) && !pfile
->state
.skip_eval
)
809 cpp_warning (pfile
, CPP_W_UNDEF
, "\"%s\" is not defined",
810 NODE_NAME (token
->val
.node
.node
));
815 if (!pfile
->state
.skipping
)
817 /* A pedantic warning takes precedence over a deprecated
819 if (CPP_PEDANTIC (pfile
))
820 cpp_error (pfile
, CPP_DL_PEDWARN
,
821 "assertions are a GCC extension");
822 else if (CPP_OPTION (pfile
, cpp_warn_deprecated
))
823 cpp_warning (pfile
, CPP_W_DEPRECATED
,
824 "assertions are a deprecated extension");
826 _cpp_test_assertion (pfile
, &temp
);
835 result
.unsignedp
= !!unsignedp
;
839 /* Operator precedence and flags table.
841 After an operator is returned from the lexer, if it has priority less
842 than the operator on the top of the stack, we reduce the stack by one
843 operator and repeat the test. Since equal priorities do not reduce,
844 this is naturally right-associative.
846 We handle left-associative operators by decrementing the priority of
847 just-lexed operators by one, but retaining the priority of operators
848 already on the stack.
850 The remaining cases are '(' and ')'. We handle '(' by skipping the
851 reduction phase completely. ')' is given lower priority than
852 everything else, including '(', effectively forcing a reduction of the
853 parenthesized expression. If there is a matching '(', the routine
854 reduce() exits immediately. If the normal exit route sees a ')', then
855 there cannot have been a matching '(' and an error message is output.
857 The parser assumes all shifted operators require a left operand unless
858 the flag NO_L_OPERAND is set. These semantics are automatic; any
859 extra semantics need to be handled with operator-specific code. */
861 /* Flags. If CHECK_PROMOTION, we warn if the effective sign of an
862 operand changes because of integer promotions. */
863 #define NO_L_OPERAND (1 << 0)
864 #define LEFT_ASSOC (1 << 1)
865 #define CHECK_PROMOTION (1 << 2)
867 /* Operator to priority map. Must be in the same order as the first
868 N entries of enum cpp_ttype. */
869 static const struct cpp_operator
875 /* EQ */ {0, 0}, /* Shouldn't happen. */
876 /* NOT */ {16, NO_L_OPERAND
},
877 /* GREATER */ {12, LEFT_ASSOC
| CHECK_PROMOTION
},
878 /* LESS */ {12, LEFT_ASSOC
| CHECK_PROMOTION
},
879 /* PLUS */ {14, LEFT_ASSOC
| CHECK_PROMOTION
},
880 /* MINUS */ {14, LEFT_ASSOC
| CHECK_PROMOTION
},
881 /* MULT */ {15, LEFT_ASSOC
| CHECK_PROMOTION
},
882 /* DIV */ {15, LEFT_ASSOC
| CHECK_PROMOTION
},
883 /* MOD */ {15, LEFT_ASSOC
| CHECK_PROMOTION
},
884 /* AND */ {9, LEFT_ASSOC
| CHECK_PROMOTION
},
885 /* OR */ {7, LEFT_ASSOC
| CHECK_PROMOTION
},
886 /* XOR */ {8, LEFT_ASSOC
| CHECK_PROMOTION
},
887 /* RSHIFT */ {13, LEFT_ASSOC
},
888 /* LSHIFT */ {13, LEFT_ASSOC
},
890 /* COMPL */ {16, NO_L_OPERAND
},
891 /* AND_AND */ {6, LEFT_ASSOC
},
892 /* OR_OR */ {5, LEFT_ASSOC
},
893 /* Note that QUERY, COLON, and COMMA must have the same precedence.
894 However, there are some special cases for these in reduce(). */
896 /* COLON */ {4, LEFT_ASSOC
| CHECK_PROMOTION
},
897 /* COMMA */ {4, LEFT_ASSOC
},
898 /* OPEN_PAREN */ {1, NO_L_OPERAND
},
899 /* CLOSE_PAREN */ {0, 0},
901 /* EQ_EQ */ {11, LEFT_ASSOC
},
902 /* NOT_EQ */ {11, LEFT_ASSOC
},
903 /* GREATER_EQ */ {12, LEFT_ASSOC
| CHECK_PROMOTION
},
904 /* LESS_EQ */ {12, LEFT_ASSOC
| CHECK_PROMOTION
},
905 /* UPLUS */ {16, NO_L_OPERAND
},
906 /* UMINUS */ {16, NO_L_OPERAND
}
909 /* Parse and evaluate a C expression, reading from PFILE.
910 Returns the truth value of the expression.
912 The implementation is an operator precedence parser, i.e. a
913 bottom-up parser, using a stack for not-yet-reduced tokens.
915 The stack base is op_stack, and the current stack pointer is 'top'.
916 There is a stack element for each operator (only), and the most
917 recently pushed operator is 'top->op'. An operand (value) is
918 stored in the 'value' field of the stack element of the operator
921 _cpp_parse_expr (cpp_reader
*pfile
, bool is_if
)
923 struct op
*top
= pfile
->op_stack
;
924 unsigned int lex_count
;
925 bool saw_leading_not
, want_value
= true;
927 pfile
->state
.skip_eval
= 0;
929 /* Set up detection of #if ! defined(). */
930 pfile
->mi_ind_cmacro
= 0;
931 saw_leading_not
= false;
934 /* Lowest priority operator prevents further reductions. */
942 op
.token
= cpp_get_token (pfile
);
943 op
.op
= op
.token
->type
;
944 op
.loc
= op
.token
->src_loc
;
948 /* These tokens convert into values. */
957 SYNTAX_ERROR2 ("missing binary operator before token \"%s\"",
958 cpp_token_as_text (pfile
, op
.token
));
960 top
->value
= eval_token (pfile
, op
.token
);
964 saw_leading_not
= lex_count
== 1;
976 if ((int) op
.op
<= (int) CPP_EQ
|| (int) op
.op
>= (int) CPP_PLUS_EQ
)
977 SYNTAX_ERROR2 ("token \"%s\" is not valid in preprocessor expressions",
978 cpp_token_as_text (pfile
, op
.token
));
982 /* Check we have a value or operator as appropriate. */
983 if (optab
[op
.op
].flags
& NO_L_OPERAND
)
986 SYNTAX_ERROR2 ("missing binary operator before token \"%s\"",
987 cpp_token_as_text (pfile
, op
.token
));
991 /* We want a number (or expression) and haven't got one.
992 Try to emit a specific diagnostic. */
993 if (op
.op
== CPP_CLOSE_PAREN
&& top
->op
== CPP_OPEN_PAREN
)
994 SYNTAX_ERROR ("missing expression between '(' and ')'");
996 if (op
.op
== CPP_EOF
&& top
->op
== CPP_EOF
)
997 SYNTAX_ERROR2 ("%s with no expression", is_if
? "#if" : "#elif");
999 if (top
->op
!= CPP_EOF
&& top
->op
!= CPP_OPEN_PAREN
)
1000 SYNTAX_ERROR2 ("operator '%s' has no right operand",
1001 cpp_token_as_text (pfile
, top
->token
));
1002 else if (op
.op
== CPP_CLOSE_PAREN
|| op
.op
== CPP_EOF
)
1003 /* Complain about missing paren during reduction. */;
1005 SYNTAX_ERROR2 ("operator '%s' has no left operand",
1006 cpp_token_as_text (pfile
, op
.token
));
1009 top
= reduce (pfile
, top
, op
.op
);
1013 if (op
.op
== CPP_EOF
)
1018 case CPP_CLOSE_PAREN
:
1021 if (!num_zerop (top
->value
))
1022 pfile
->state
.skip_eval
++;
1026 if (num_zerop (top
->value
))
1027 pfile
->state
.skip_eval
++;
1030 if (top
->op
!= CPP_QUERY
)
1031 SYNTAX_ERROR (" ':' without preceding '?'");
1032 if (!num_zerop (top
[-1].value
)) /* Was '?' condition true? */
1033 pfile
->state
.skip_eval
++;
1035 pfile
->state
.skip_eval
--;
1042 /* Check for and handle stack overflow. */
1043 if (++top
== pfile
->op_limit
)
1044 top
= _cpp_expand_op_stack (pfile
);
1047 top
->token
= op
.token
;
1048 top
->loc
= op
.token
->src_loc
;
1051 /* The controlling macro expression is only valid if we called lex 3
1052 times: <!> <defined expression> and <EOF>. push_conditional ()
1053 checks that we are at top-of-file. */
1054 if (pfile
->mi_ind_cmacro
&& !(saw_leading_not
&& lex_count
== 3))
1055 pfile
->mi_ind_cmacro
= 0;
1057 if (top
!= pfile
->op_stack
)
1059 cpp_error (pfile
, CPP_DL_ICE
, "unbalanced stack in %s",
1060 is_if
? "#if" : "#elif");
1062 return false; /* Return false on syntax error. */
1065 return !num_zerop (top
->value
);
1068 /* Reduce the operator / value stack if possible, in preparation for
1069 pushing operator OP. Returns NULL on error, otherwise the top of
1072 reduce (cpp_reader
*pfile
, struct op
*top
, enum cpp_ttype op
)
1076 if (top
->op
<= CPP_EQ
|| top
->op
> CPP_LAST_CPP_OP
+ 2)
1079 cpp_error (pfile
, CPP_DL_ICE
, "impossible operator '%u'", top
->op
);
1083 if (op
== CPP_OPEN_PAREN
)
1086 /* Decrement the priority of left-associative operators to force a
1087 reduction with operators of otherwise equal priority. */
1088 prio
= optab
[op
].prio
- ((optab
[op
].flags
& LEFT_ASSOC
) != 0);
1089 while (prio
< optab
[top
->op
].prio
)
1091 if (CPP_OPTION (pfile
, warn_num_sign_change
)
1092 && optab
[top
->op
].flags
& CHECK_PROMOTION
)
1093 check_promotion (pfile
, top
);
1101 top
[-1].value
= num_unary_op (pfile
, top
->value
, top
->op
);
1102 top
[-1].loc
= top
->loc
;
1110 top
[-1].value
= num_binary_op (pfile
, top
[-1].value
,
1111 top
->value
, top
->op
);
1112 top
[-1].loc
= top
->loc
;
1117 case CPP_GREATER_EQ
:
1120 = num_inequality_op (pfile
, top
[-1].value
, top
->value
, top
->op
);
1121 top
[-1].loc
= top
->loc
;
1127 = num_equality_op (pfile
, top
[-1].value
, top
->value
, top
->op
);
1128 top
[-1].loc
= top
->loc
;
1135 = num_bitwise_op (pfile
, top
[-1].value
, top
->value
, top
->op
);
1136 top
[-1].loc
= top
->loc
;
1140 top
[-1].value
= num_mul (pfile
, top
[-1].value
, top
->value
);
1141 top
[-1].loc
= top
->loc
;
1146 top
[-1].value
= num_div_op (pfile
, top
[-1].value
,
1147 top
->value
, top
->op
, top
->loc
);
1148 top
[-1].loc
= top
->loc
;
1153 if (!num_zerop (top
->value
))
1154 pfile
->state
.skip_eval
--;
1155 top
->value
.low
= (!num_zerop (top
->value
)
1156 || !num_zerop (top
[1].value
));
1157 top
->value
.high
= 0;
1158 top
->value
.unsignedp
= false;
1159 top
->value
.overflow
= false;
1160 top
->loc
= top
[1].loc
;
1165 if (num_zerop (top
->value
))
1166 pfile
->state
.skip_eval
--;
1167 top
->value
.low
= (!num_zerop (top
->value
)
1168 && !num_zerop (top
[1].value
));
1169 top
->value
.high
= 0;
1170 top
->value
.unsignedp
= false;
1171 top
->value
.overflow
= false;
1172 top
->loc
= top
[1].loc
;
1175 case CPP_OPEN_PAREN
:
1176 if (op
!= CPP_CLOSE_PAREN
)
1178 cpp_error_with_line (pfile
, CPP_DL_ERROR
,
1179 top
->token
->src_loc
,
1180 0, "missing ')' in expression");
1184 top
->value
= top
[1].value
;
1185 top
->loc
= top
[1].loc
;
1190 if (!num_zerop (top
->value
))
1192 pfile
->state
.skip_eval
--;
1193 top
->value
= top
[1].value
;
1194 top
->loc
= top
[1].loc
;
1198 top
->value
= top
[2].value
;
1199 top
->loc
= top
[2].loc
;
1201 top
->value
.unsignedp
= (top
[1].value
.unsignedp
1202 || top
[2].value
.unsignedp
);
1206 /* COMMA and COLON should not reduce a QUERY operator. */
1207 if (op
== CPP_COMMA
|| op
== CPP_COLON
)
1209 cpp_error (pfile
, CPP_DL_ERROR
, "'?' without following ':'");
1217 if (top
->value
.overflow
&& !pfile
->state
.skip_eval
)
1218 cpp_error (pfile
, CPP_DL_PEDWARN
,
1219 "integer overflow in preprocessor expression");
1222 if (op
== CPP_CLOSE_PAREN
)
1224 cpp_error (pfile
, CPP_DL_ERROR
, "missing '(' in expression");
1231 /* Returns the position of the old top of stack after expansion. */
1233 _cpp_expand_op_stack (cpp_reader
*pfile
)
1235 size_t old_size
= (size_t) (pfile
->op_limit
- pfile
->op_stack
);
1236 size_t new_size
= old_size
* 2 + 20;
1238 pfile
->op_stack
= XRESIZEVEC (struct op
, pfile
->op_stack
, new_size
);
1239 pfile
->op_limit
= pfile
->op_stack
+ new_size
;
1241 return pfile
->op_stack
+ old_size
;
1244 /* Emits a warning if the effective sign of either operand of OP
1245 changes because of integer promotions. */
1247 check_promotion (cpp_reader
*pfile
, const struct op
*op
)
1249 if (op
->value
.unsignedp
== op
[-1].value
.unsignedp
)
1252 if (op
->value
.unsignedp
)
1254 if (!num_positive (op
[-1].value
, CPP_OPTION (pfile
, precision
)))
1255 cpp_error_with_line (pfile
, CPP_DL_WARNING
, op
[-1].loc
, 0,
1256 "the left operand of \"%s\" changes sign when promoted",
1257 cpp_token_as_text (pfile
, op
->token
));
1259 else if (!num_positive (op
->value
, CPP_OPTION (pfile
, precision
)))
1260 cpp_error_with_line (pfile
, CPP_DL_WARNING
, op
->loc
, 0,
1261 "the right operand of \"%s\" changes sign when promoted",
1262 cpp_token_as_text (pfile
, op
->token
));
1265 /* Clears the unused high order bits of the number pointed to by PNUM. */
1267 num_trim (cpp_num num
, size_t precision
)
1269 if (precision
> PART_PRECISION
)
1271 precision
-= PART_PRECISION
;
1272 if (precision
< PART_PRECISION
)
1273 num
.high
&= ((cpp_num_part
) 1 << precision
) - 1;
1277 if (precision
< PART_PRECISION
)
1278 num
.low
&= ((cpp_num_part
) 1 << precision
) - 1;
1285 /* True iff A (presumed signed) >= 0. */
1287 num_positive (cpp_num num
, size_t precision
)
1289 if (precision
> PART_PRECISION
)
1291 precision
-= PART_PRECISION
;
1292 return (num
.high
& (cpp_num_part
) 1 << (precision
- 1)) == 0;
1295 return (num
.low
& (cpp_num_part
) 1 << (precision
- 1)) == 0;
1298 /* Sign extend a number, with PRECISION significant bits and all
1299 others assumed clear, to fill out a cpp_num structure. */
1301 cpp_num_sign_extend (cpp_num num
, size_t precision
)
1305 if (precision
> PART_PRECISION
)
1307 precision
-= PART_PRECISION
;
1308 if (precision
< PART_PRECISION
1309 && (num
.high
& (cpp_num_part
) 1 << (precision
- 1)))
1310 num
.high
|= ~(~(cpp_num_part
) 0 >> (PART_PRECISION
- precision
));
1312 else if (num
.low
& (cpp_num_part
) 1 << (precision
- 1))
1314 if (precision
< PART_PRECISION
)
1315 num
.low
|= ~(~(cpp_num_part
) 0 >> (PART_PRECISION
- precision
));
1316 num
.high
= ~(cpp_num_part
) 0;
1323 /* Returns the negative of NUM. */
1325 num_negate (cpp_num num
, size_t precision
)
1330 num
.high
= ~num
.high
;
1334 num
= num_trim (num
, precision
);
1335 num
.overflow
= (!num
.unsignedp
&& num_eq (num
, copy
) && !num_zerop (num
));
1340 /* Returns true if A >= B. */
1342 num_greater_eq (cpp_num pa
, cpp_num pb
, size_t precision
)
1346 unsignedp
= pa
.unsignedp
|| pb
.unsignedp
;
1350 /* Both numbers have signed type. If they are of different
1351 sign, the answer is the sign of A. */
1352 unsignedp
= num_positive (pa
, precision
);
1354 if (unsignedp
!= num_positive (pb
, precision
))
1357 /* Otherwise we can do an unsigned comparison. */
1360 return (pa
.high
> pb
.high
) || (pa
.high
== pb
.high
&& pa
.low
>= pb
.low
);
1363 /* Returns LHS OP RHS, where OP is a bit-wise operation. */
1365 num_bitwise_op (cpp_reader
*pfile ATTRIBUTE_UNUSED
,
1366 cpp_num lhs
, cpp_num rhs
, enum cpp_ttype op
)
1368 lhs
.overflow
= false;
1369 lhs
.unsignedp
= lhs
.unsignedp
|| rhs
.unsignedp
;
1371 /* As excess precision is zeroed, there is no need to num_trim () as
1372 these operations cannot introduce a set bit there. */
1376 lhs
.high
&= rhs
.high
;
1378 else if (op
== CPP_OR
)
1381 lhs
.high
|= rhs
.high
;
1386 lhs
.high
^= rhs
.high
;
1392 /* Returns LHS OP RHS, where OP is an inequality. */
1394 num_inequality_op (cpp_reader
*pfile
, cpp_num lhs
, cpp_num rhs
,
1397 bool gte
= num_greater_eq (lhs
, rhs
, CPP_OPTION (pfile
, precision
));
1399 if (op
== CPP_GREATER_EQ
)
1401 else if (op
== CPP_LESS
)
1403 else if (op
== CPP_GREATER
)
1404 lhs
.low
= gte
&& !num_eq (lhs
, rhs
);
1405 else /* CPP_LESS_EQ. */
1406 lhs
.low
= !gte
|| num_eq (lhs
, rhs
);
1409 lhs
.overflow
= false;
1410 lhs
.unsignedp
= false;
1414 /* Returns LHS OP RHS, where OP is == or !=. */
1416 num_equality_op (cpp_reader
*pfile ATTRIBUTE_UNUSED
,
1417 cpp_num lhs
, cpp_num rhs
, enum cpp_ttype op
)
1419 /* Work around a 3.0.4 bug; see PR 6950. */
1420 bool eq
= num_eq (lhs
, rhs
);
1421 if (op
== CPP_NOT_EQ
)
1425 lhs
.overflow
= false;
1426 lhs
.unsignedp
= false;
1430 /* Shift NUM, of width PRECISION, right by N bits. */
1432 num_rshift (cpp_num num
, size_t precision
, size_t n
)
1434 cpp_num_part sign_mask
;
1435 bool x
= num_positive (num
, precision
);
1437 if (num
.unsignedp
|| x
)
1440 sign_mask
= ~(cpp_num_part
) 0;
1443 num
.high
= num
.low
= sign_mask
;
1447 if (precision
< PART_PRECISION
)
1448 num
.high
= sign_mask
, num
.low
|= sign_mask
<< precision
;
1449 else if (precision
< 2 * PART_PRECISION
)
1450 num
.high
|= sign_mask
<< (precision
- PART_PRECISION
);
1452 if (n
>= PART_PRECISION
)
1454 n
-= PART_PRECISION
;
1456 num
.high
= sign_mask
;
1461 num
.low
= (num
.low
>> n
) | (num
.high
<< (PART_PRECISION
- n
));
1462 num
.high
= (num
.high
>> n
) | (sign_mask
<< (PART_PRECISION
- n
));
1466 num
= num_trim (num
, precision
);
1467 num
.overflow
= false;
1471 /* Shift NUM, of width PRECISION, left by N bits. */
1473 num_lshift (cpp_num num
, size_t precision
, size_t n
)
1477 num
.overflow
= !num
.unsignedp
&& !num_zerop (num
);
1478 num
.high
= num
.low
= 0;
1482 cpp_num orig
, maybe_orig
;
1486 if (m
>= PART_PRECISION
)
1488 m
-= PART_PRECISION
;
1494 num
.high
= (num
.high
<< m
) | (num
.low
>> (PART_PRECISION
- m
));
1497 num
= num_trim (num
, precision
);
1500 num
.overflow
= false;
1503 maybe_orig
= num_rshift (num
, precision
, n
);
1504 num
.overflow
= !num_eq (orig
, maybe_orig
);
1511 /* The four unary operators: +, -, ! and ~. */
1513 num_unary_op (cpp_reader
*pfile
, cpp_num num
, enum cpp_ttype op
)
1518 if (CPP_WTRADITIONAL (pfile
) && !pfile
->state
.skip_eval
)
1519 cpp_warning (pfile
, CPP_W_TRADITIONAL
,
1520 "traditional C rejects the unary plus operator");
1521 num
.overflow
= false;
1525 num
= num_negate (num
, CPP_OPTION (pfile
, precision
));
1529 num
.high
= ~num
.high
;
1531 num
= num_trim (num
, CPP_OPTION (pfile
, precision
));
1532 num
.overflow
= false;
1535 default: /* case CPP_NOT: */
1536 num
.low
= num_zerop (num
);
1538 num
.overflow
= false;
1539 num
.unsignedp
= false;
1546 /* The various binary operators. */
1548 num_binary_op (cpp_reader
*pfile
, cpp_num lhs
, cpp_num rhs
, enum cpp_ttype op
)
1551 size_t precision
= CPP_OPTION (pfile
, precision
);
1559 if (!rhs
.unsignedp
&& !num_positive (rhs
, precision
))
1561 /* A negative shift is a positive shift the other way. */
1562 if (op
== CPP_LSHIFT
)
1566 rhs
= num_negate (rhs
, precision
);
1569 n
= ~0; /* Maximal. */
1572 if (op
== CPP_LSHIFT
)
1573 lhs
= num_lshift (lhs
, precision
, n
);
1575 lhs
= num_rshift (lhs
, precision
, n
);
1580 rhs
= num_negate (rhs
, precision
);
1582 result
.low
= lhs
.low
+ rhs
.low
;
1583 result
.high
= lhs
.high
+ rhs
.high
;
1584 if (result
.low
< lhs
.low
)
1586 result
.unsignedp
= lhs
.unsignedp
|| rhs
.unsignedp
;
1587 result
.overflow
= false;
1589 result
= num_trim (result
, precision
);
1590 if (!result
.unsignedp
)
1592 bool lhsp
= num_positive (lhs
, precision
);
1593 result
.overflow
= (lhsp
== num_positive (rhs
, precision
)
1594 && lhsp
!= num_positive (result
, precision
));
1599 default: /* case CPP_COMMA: */
1600 if (CPP_PEDANTIC (pfile
) && (!CPP_OPTION (pfile
, c99
)
1601 || !pfile
->state
.skip_eval
))
1602 cpp_error (pfile
, CPP_DL_PEDWARN
,
1603 "comma operator in operand of #if");
1611 /* Multiplies two unsigned cpp_num_parts to give a cpp_num. This
1614 num_part_mul (cpp_num_part lhs
, cpp_num_part rhs
)
1617 cpp_num_part middle
[2], temp
;
1619 result
.low
= LOW_PART (lhs
) * LOW_PART (rhs
);
1620 result
.high
= HIGH_PART (lhs
) * HIGH_PART (rhs
);
1622 middle
[0] = LOW_PART (lhs
) * HIGH_PART (rhs
);
1623 middle
[1] = HIGH_PART (lhs
) * LOW_PART (rhs
);
1626 result
.low
+= LOW_PART (middle
[0]) << (PART_PRECISION
/ 2);
1627 if (result
.low
< temp
)
1631 result
.low
+= LOW_PART (middle
[1]) << (PART_PRECISION
/ 2);
1632 if (result
.low
< temp
)
1635 result
.high
+= HIGH_PART (middle
[0]);
1636 result
.high
+= HIGH_PART (middle
[1]);
1637 result
.unsignedp
= true;
1638 result
.overflow
= false;
1643 /* Multiply two preprocessing numbers. */
1645 num_mul (cpp_reader
*pfile
, cpp_num lhs
, cpp_num rhs
)
1647 cpp_num result
, temp
;
1648 bool unsignedp
= lhs
.unsignedp
|| rhs
.unsignedp
;
1649 bool overflow
, negate
= false;
1650 size_t precision
= CPP_OPTION (pfile
, precision
);
1652 /* Prepare for unsigned multiplication. */
1655 if (!num_positive (lhs
, precision
))
1656 negate
= !negate
, lhs
= num_negate (lhs
, precision
);
1657 if (!num_positive (rhs
, precision
))
1658 negate
= !negate
, rhs
= num_negate (rhs
, precision
);
1661 overflow
= lhs
.high
&& rhs
.high
;
1662 result
= num_part_mul (lhs
.low
, rhs
.low
);
1664 temp
= num_part_mul (lhs
.high
, rhs
.low
);
1665 result
.high
+= temp
.low
;
1669 temp
= num_part_mul (lhs
.low
, rhs
.high
);
1670 result
.high
+= temp
.low
;
1674 temp
.low
= result
.low
, temp
.high
= result
.high
;
1675 result
= num_trim (result
, precision
);
1676 if (!num_eq (result
, temp
))
1680 result
= num_negate (result
, precision
);
1683 result
.overflow
= false;
1685 result
.overflow
= overflow
|| (num_positive (result
, precision
) ^ !negate
1686 && !num_zerop (result
));
1687 result
.unsignedp
= unsignedp
;
1692 /* Divide two preprocessing numbers, LHS and RHS, returning the answer
1693 or the remainder depending upon OP. LOCATION is the source location
1694 of this operator (for diagnostics). */
1697 num_div_op (cpp_reader
*pfile
, cpp_num lhs
, cpp_num rhs
, enum cpp_ttype op
,
1698 source_location location
)
1700 cpp_num result
, sub
;
1702 bool unsignedp
= lhs
.unsignedp
|| rhs
.unsignedp
;
1703 bool negate
= false, lhs_neg
= false;
1704 size_t i
, precision
= CPP_OPTION (pfile
, precision
);
1706 /* Prepare for unsigned division. */
1709 if (!num_positive (lhs
, precision
))
1710 negate
= !negate
, lhs_neg
= true, lhs
= num_negate (lhs
, precision
);
1711 if (!num_positive (rhs
, precision
))
1712 negate
= !negate
, rhs
= num_negate (rhs
, precision
);
1715 /* Find the high bit. */
1719 mask
= (cpp_num_part
) 1 << (i
- PART_PRECISION
);
1720 for (; ; i
--, mask
>>= 1)
1721 if (rhs
.high
& mask
)
1726 if (precision
> PART_PRECISION
)
1727 i
= precision
- PART_PRECISION
- 1;
1730 mask
= (cpp_num_part
) 1 << i
;
1731 for (; ; i
--, mask
>>= 1)
1737 if (!pfile
->state
.skip_eval
)
1738 cpp_error_with_line (pfile
, CPP_DL_ERROR
, location
, 0,
1739 "division by zero in #if");
1743 /* First nonzero bit of RHS is bit I. Do naive division by
1744 shifting the RHS fully left, and subtracting from LHS if LHS is
1745 at least as big, and then repeating but with one less shift.
1746 This is not very efficient, but is easy to understand. */
1748 rhs
.unsignedp
= true;
1749 lhs
.unsignedp
= true;
1750 i
= precision
- i
- 1;
1751 sub
= num_lshift (rhs
, precision
, i
);
1753 result
.high
= result
.low
= 0;
1756 if (num_greater_eq (lhs
, sub
, precision
))
1758 lhs
= num_binary_op (pfile
, lhs
, sub
, CPP_MINUS
);
1759 if (i
>= PART_PRECISION
)
1760 result
.high
|= (cpp_num_part
) 1 << (i
- PART_PRECISION
);
1762 result
.low
|= (cpp_num_part
) 1 << i
;
1766 sub
.low
= (sub
.low
>> 1) | (sub
.high
<< (PART_PRECISION
- 1));
1770 /* We divide so that the remainder has the sign of the LHS. */
1773 result
.unsignedp
= unsignedp
;
1774 result
.overflow
= false;
1778 result
= num_negate (result
, precision
);
1779 result
.overflow
= (num_positive (result
, precision
) ^ !negate
1780 && !num_zerop (result
));
1787 lhs
.unsignedp
= unsignedp
;
1788 lhs
.overflow
= false;
1790 lhs
= num_negate (lhs
, precision
);