libsanitizer/Makefile.in

   1 # Makefile.in generated by automake 1.11.6 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
   6 # Foundation, Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 VPATH = @srcdir@
  19 am__make_dryrun = \
  20   { \
  21     am__dry=no; \
  22     case $$MAKEFLAGS in \
  23       *\\[\ \   ]*) \
  24         echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
  25           | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
  26       *) \
  27         for am__flg in $$MAKEFLAGS; do \
  28           case $$am__flg in \
  29             *=*|--*) ;; \
  30             *n*) am__dry=yes; break;; \
  31           esac; \
  32         done;; \
  33     esac; \
  34     test $$am__dry = yes; \
  35   }
  36 pkgdatadir = $(datadir)/@PACKAGE@
  37 pkgincludedir = $(includedir)/@PACKAGE@
  38 pkglibdir = $(libdir)/@PACKAGE@
  39 pkglibexecdir = $(libexecdir)/@PACKAGE@
  40 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  41 install_sh_DATA = $(install_sh) -c -m 644
  42 install_sh_PROGRAM = $(install_sh) -c
  43 install_sh_SCRIPT = $(install_sh) -c
  44 INSTALL_HEADER = $(INSTALL_DATA)
  45 transform = $(program_transform_name)
  46 NORMAL_INSTALL = :
  47 PRE_INSTALL = :
  48 POST_INSTALL = :
  49 NORMAL_UNINSTALL = :
  50 PRE_UNINSTALL = :
  51 POST_UNINSTALL = :
  52 build_triplet = @build@
  53 host_triplet = @host@
  54 target_triplet = @target@
  55 @SANITIZER_SUPPORTED_TRUE@am__append_1 = include/sanitizer/common_interface_defs.h \
  56 @SANITIZER_SUPPORTED_TRUE@      include/sanitizer/lsan_interface.h \
  57 @SANITIZER_SUPPORTED_TRUE@      include/sanitizer/asan_interface.h \
  58 @SANITIZER_SUPPORTED_TRUE@      include/sanitizer/tsan_interface.h
  59 @SANITIZER_SUPPORTED_TRUE@@USING_MAC_INTERPOSE_FALSE@am__append_2 = interception
  60 @LIBBACKTRACE_SUPPORTED_TRUE@@SANITIZER_SUPPORTED_TRUE@am__append_3 = libbacktrace
  61 @SANITIZER_SUPPORTED_TRUE@@TSAN_SUPPORTED_TRUE@am__append_4 = tsan
  62 subdir = .
  63 DIST_COMMON = ChangeLog $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  64         $(top_srcdir)/configure $(am__configure_deps) \
  65         $(srcdir)/config.h.in $(srcdir)/../mkinstalldirs \
  66         $(srcdir)/libsanitizer.spec.in
  67 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  68 am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
  69         $(top_srcdir)/../config/depstand.m4 \
  70         $(top_srcdir)/../config/lead-dot.m4 \
  71         $(top_srcdir)/../config/libstdc++-raw-cxx.m4 \
  72         $(top_srcdir)/../config/multi.m4 \
  73         $(top_srcdir)/../config/override.m4 \
  74         $(top_srcdir)/../config/stdint.m4 \
  75         $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
  76         $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
  77         $(top_srcdir)/acinclude.m4 $(top_srcdir)/../libtool.m4 \
  78         $(top_srcdir)/configure.ac
  79 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  80         $(ACLOCAL_M4)
  81 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  82  configure.lineno config.status.lineno
  83 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
  84 CONFIG_HEADER = config.h
  85 CONFIG_CLEAN_FILES = libsanitizer.spec
  86 CONFIG_CLEAN_VPATH_FILES =
  87 SOURCES =
  88 MULTISRCTOP =
  89 MULTIBUILDTOP =
  90 MULTIDIRS =
  91 MULTISUBDIR =
  92 MULTIDO = true
  93 MULTICLEAN = true
  94 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
  95         html-recursive info-recursive install-data-recursive \
  96         install-dvi-recursive install-exec-recursive \
  97         install-html-recursive install-info-recursive \
  98         install-pdf-recursive install-ps-recursive install-recursive \
  99         installcheck-recursive installdirs-recursive pdf-recursive \
 100         ps-recursive uninstall-recursive
 101 am__can_run_installinfo = \
 102   case $$AM_UPDATE_INFO_DIR in \
 103     n|no|NO) false;; \
 104     *) (install-info --version) >/dev/null 2>&1;; \
 105   esac
 106 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 107 am__vpath_adj = case $$p in \
 108     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 109     *) f=$$p;; \
 110   esac;
 111 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 112 am__install_max = 40
 113 am__nobase_strip_setup = \
 114   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 115 am__nobase_strip = \
 116   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 117 am__nobase_list = $(am__nobase_strip_setup); \
 118   for p in $$list; do echo "$$p $$p"; done | \
 119   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 120   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 121     if (++n[$$2] == $(am__install_max)) \
 122       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 123     END { for (dir in files) print dir, files[dir] }'
 124 am__base_list = \
 125   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 126   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 127 am__uninstall_files_from_dir = { \
 128   test -z "$$files" \
 129     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 130     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 131          $(am__cd) "$$dir" && rm -f $$files; }; \
 132   }
 133 am__installdirs = "$(DESTDIR)$(sanincludedir)" \
 134         "$(DESTDIR)$(toolexeclibdir)"
 135 HEADERS = $(nodist_saninclude_HEADERS) $(nodist_toolexeclib_HEADERS)
 136 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 137   distclean-recursive maintainer-clean-recursive
 138 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
 139         $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
 140 ETAGS = etags
 141 CTAGS = ctags
 142 DIST_SUBDIRS = sanitizer_common interception libbacktrace lsan asan \
 143         ubsan tsan
 144 ACLOCAL = @ACLOCAL@
 145 ALLOC_FILE = @ALLOC_FILE@
 146 AMTAR = @AMTAR@
 147 AR = @AR@
 148 AUTOCONF = @AUTOCONF@
 149 AUTOHEADER = @AUTOHEADER@
 150 AUTOMAKE = @AUTOMAKE@
 151 AWK = @AWK@
 152 BACKTRACE_SUPPORTED = @BACKTRACE_SUPPORTED@
 153 BACKTRACE_SUPPORTS_THREADS = @BACKTRACE_SUPPORTS_THREADS@
 154 BACKTRACE_USES_MALLOC = @BACKTRACE_USES_MALLOC@
 155 CC = @CC@
 156 CCAS = @CCAS@
 157 CCASDEPMODE = @CCASDEPMODE@
 158 CCASFLAGS = @CCASFLAGS@
 159 CCDEPMODE = @CCDEPMODE@
 160 CFLAGS = @CFLAGS@
 161 CPP = @CPP@
 162 CPPFLAGS = @CPPFLAGS@
 163 CXX = @CXX@
 164 CXXCPP = @CXXCPP@
 165 CXXDEPMODE = @CXXDEPMODE@
 166 CXXFLAGS = @CXXFLAGS@
 167 CYGPATH_W = @CYGPATH_W@
 168 DEFS = @DEFS@
 169 DEPDIR = @DEPDIR@
 170 DSYMUTIL = @DSYMUTIL@
 171 DUMPBIN = @DUMPBIN@
 172 ECHO_C = @ECHO_C@
 173 ECHO_N = @ECHO_N@
 174 ECHO_T = @ECHO_T@
 175 EGREP = @EGREP@
 176 EXEEXT = @EXEEXT@
 177 FGREP = @FGREP@
 178 FORMAT_FILE = @FORMAT_FILE@
 179 GREP = @GREP@
 180 INSTALL = @INSTALL@
 181 INSTALL_DATA = @INSTALL_DATA@
 182 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 183 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 184 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 185 LD = @LD@
 186 LDFLAGS = @LDFLAGS@
 187 LIBOBJS = @LIBOBJS@
 188 LIBS = @LIBS@
 189 LIBSTDCXX_RAW_CXX_CXXFLAGS = @LIBSTDCXX_RAW_CXX_CXXFLAGS@
 190 LIBSTDCXX_RAW_CXX_LDFLAGS = @LIBSTDCXX_RAW_CXX_LDFLAGS@
 191 LIBTOOL = @LIBTOOL@
 192 LIPO = @LIPO@
 193 LN_S = @LN_S@
 194 LTLIBOBJS = @LTLIBOBJS@
 195 MAINT = @MAINT@
 196 MAKEINFO = @MAKEINFO@
 197 MKDIR_P = @MKDIR_P@
 198 NM = @NM@
 199 NMEDIT = @NMEDIT@
 200 OBJDUMP = @OBJDUMP@
 201 OBJEXT = @OBJEXT@
 202 OTOOL = @OTOOL@
 203 OTOOL64 = @OTOOL64@
 204 PACKAGE = @PACKAGE@
 205 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 206 PACKAGE_NAME = @PACKAGE_NAME@
 207 PACKAGE_STRING = @PACKAGE_STRING@
 208 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 209 PACKAGE_URL = @PACKAGE_URL@
 210 PACKAGE_VERSION = @PACKAGE_VERSION@
 211 PATH_SEPARATOR = @PATH_SEPARATOR@
 212 RANLIB = @RANLIB@
 213 RPC_DEFS = @RPC_DEFS@
 214 SANITIZER_COMMON_TARGET_DEPENDENT_OBJECTS = @SANITIZER_COMMON_TARGET_DEPENDENT_OBJECTS@
 215 SED = @SED@
 216 SET_MAKE = @SET_MAKE@
 217 SHELL = @SHELL@
 218 STRIP = @STRIP@
 219 TSAN_TARGET_DEPENDENT_OBJECTS = @TSAN_TARGET_DEPENDENT_OBJECTS@
 220 VERSION = @VERSION@
 221 VIEW_FILE = @VIEW_FILE@
 222 abs_builddir = @abs_builddir@
 223 abs_srcdir = @abs_srcdir@
 224 abs_top_builddir = @abs_top_builddir@
 225 abs_top_srcdir = @abs_top_srcdir@
 226 ac_ct_CC = @ac_ct_CC@
 227 ac_ct_CXX = @ac_ct_CXX@
 228 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 229 am__include = @am__include@
 230 am__leading_dot = @am__leading_dot@
 231 am__quote = @am__quote@
 232 am__tar = @am__tar@
 233 am__untar = @am__untar@
 234 bindir = @bindir@
 235 build = @build@
 236 build_alias = @build_alias@
 237 build_cpu = @build_cpu@
 238 build_os = @build_os@
 239 build_vendor = @build_vendor@
 240 builddir = @builddir@
 241 datadir = @datadir@
 242 datarootdir = @datarootdir@
 243 docdir = @docdir@
 244 dvidir = @dvidir@
 245 enable_shared = @enable_shared@
 246 enable_static = @enable_static@
 247 exec_prefix = @exec_prefix@
 248 get_gcc_base_ver = @get_gcc_base_ver@
 249 host = @host@
 250 host_alias = @host_alias@
 251 host_cpu = @host_cpu@
 252 host_os = @host_os@
 253 host_vendor = @host_vendor@
 254 htmldir = @htmldir@
 255 includedir = @includedir@
 256 infodir = @infodir@
 257 install_sh = @install_sh@
 258 libdir = @libdir@
 259 libexecdir = @libexecdir@
 260 link_libasan = @link_libasan@
 261 link_liblsan = @link_liblsan@
 262 link_libtsan = @link_libtsan@
 263 link_libubsan = @link_libubsan@
 264 localedir = @localedir@
 265 localstatedir = @localstatedir@
 266 mandir = @mandir@
 267 mkdir_p = @mkdir_p@
 268 multi_basedir = @multi_basedir@
 269 oldincludedir = @oldincludedir@
 270 pdfdir = @pdfdir@
 271 prefix = @prefix@
 272 program_transform_name = @program_transform_name@
 273 psdir = @psdir@
 274 sbindir = @sbindir@
 275 sharedstatedir = @sharedstatedir@
 276 srcdir = @srcdir@
 277 sysconfdir = @sysconfdir@
 278 target = @target@
 279 target_alias = @target_alias@
 280 target_cpu = @target_cpu@
 281 target_noncanonical = @target_noncanonical@
 282 target_os = @target_os@
 283 target_vendor = @target_vendor@
 284 toolexecdir = @toolexecdir@
 285 toolexeclibdir = @toolexeclibdir@
 286 top_build_prefix = @top_build_prefix@
 287 top_builddir = @top_builddir@
 288 top_srcdir = @top_srcdir@
 289 ACLOCAL_AMFLAGS = -I .. -I ../config
 290 sanincludedir = $(libdir)/gcc/$(target_alias)/$(gcc_version)/include/sanitizer
 291 nodist_saninclude_HEADERS = $(am__append_1)
 292 @SANITIZER_SUPPORTED_TRUE@SUBDIRS = sanitizer_common $(am__append_2) \
 293 @SANITIZER_SUPPORTED_TRUE@      $(am__append_3) lsan asan ubsan \
 294 @SANITIZER_SUPPORTED_TRUE@      $(am__append_4)
 295 gcc_version := $(shell @get_gcc_base_ver@ $(top_srcdir)/../gcc/BASE-VER)
 296
 297 # Work around what appears to be a GNU make bug handling MAKEFLAGS
 298 # values defined in terms of make variables, as is the case for CC and
 299 # friends when we are called from the top level Makefile.
 300 AM_MAKEFLAGS = \
 301         "AR_FLAGS=$(AR_FLAGS)" \
 302         "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
 303         "CFLAGS=$(CFLAGS)" \
 304         "CXXFLAGS=$(CXXFLAGS)" \
 305         "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
 306         "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
 307         "INSTALL=$(INSTALL)" \
 308         "INSTALL_DATA=$(INSTALL_DATA)" \
 309         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 310         "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
 311         "JC1FLAGS=$(JC1FLAGS)" \
 312         "LDFLAGS=$(LDFLAGS)" \
 313         "LIBCFLAGS=$(LIBCFLAGS)" \
 314         "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
 315         "MAKE=$(MAKE)" \
 316         "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
 317         "PICFLAG=$(PICFLAG)" \
 318         "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
 319         "SHELL=$(SHELL)" \
 320         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 321         "exec_prefix=$(exec_prefix)" \
 322         "infodir=$(infodir)" \
 323         "libdir=$(libdir)" \
 324         "prefix=$(prefix)" \
 325         "includedir=$(includedir)" \
 326         "AR=$(AR)" \
 327         "AS=$(AS)" \
 328         "LD=$(LD)" \
 329         "LIBCFLAGS=$(LIBCFLAGS)" \
 330         "NM=$(NM)" \
 331         "PICFLAG=$(PICFLAG)" \
 332         "RANLIB=$(RANLIB)" \
 333         "DESTDIR=$(DESTDIR)"
 334
 335 MAKEOVERRIDES =
 336 nodist_toolexeclib_HEADERS = libsanitizer.spec
 337 all: config.h
 338         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 339
 340 .SUFFIXES:
 341 am--refresh: Makefile
 342         @:
 343 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 344         @for dep in $?; do \
 345           case '$(am__configure_deps)' in \
 346             *$$dep*) \
 347               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
 348               $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
 349                 && exit 0; \
 350               exit 1;; \
 351           esac; \
 352         done; \
 353         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 354         $(am__cd) $(top_srcdir) && \
 355           $(AUTOMAKE) --foreign Makefile
 356 .PRECIOUS: Makefile
 357 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 358         @case '$?' in \
 359           *config.status*) \
 360             echo ' $(SHELL) ./config.status'; \
 361             $(SHELL) ./config.status;; \
 362           *) \
 363             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 364             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 365         esac;
 366
 367 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 368         $(SHELL) ./config.status --recheck
 369
 370 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 371         $(am__cd) $(srcdir) && $(AUTOCONF)
 372 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 373         $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 374 $(am__aclocal_m4_deps):
 375
 376 config.h: stamp-h1
 377         @if test ! -f $@; then rm -f stamp-h1; else :; fi
 378         @if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
 379
 380 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
 381         @rm -f stamp-h1
 382         cd $(top_builddir) && $(SHELL) ./config.status config.h
 383 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 384         ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
 385         rm -f stamp-h1
 386         touch $@
 387
 388 distclean-hdr:
 389         -rm -f config.h stamp-h1
 390 libsanitizer.spec: $(top_builddir)/config.status $(srcdir)/libsanitizer.spec.in
 391         cd $(top_builddir) && $(SHELL) ./config.status $@
 392
 393 mostlyclean-libtool:
 394         -rm -f *.lo
 395
 396 clean-libtool:
 397         -rm -rf .libs _libs
 398
 399 distclean-libtool:
 400         -rm -f libtool config.lt
 401
 402 # GNU Make needs to see an explicit $(MAKE) variable in the command it
 403 # runs to enable its job server during parallel builds.  Hence the
 404 # comments below.
 405 all-multi:
 406         $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 407 install-multi:
 408         $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 409
 410 mostlyclean-multi:
 411         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
 412 clean-multi:
 413         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
 414 distclean-multi:
 415         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
 416 maintainer-clean-multi:
 417         $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
 418 install-nodist_sanincludeHEADERS: $(nodist_saninclude_HEADERS)
 419         @$(NORMAL_INSTALL)
 420         @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \
 421         if test -n "$$list"; then \
 422           echo " $(MKDIR_P) '$(DESTDIR)$(sanincludedir)'"; \
 423           $(MKDIR_P) "$(DESTDIR)$(sanincludedir)" || exit 1; \
 424         fi; \
 425         for p in $$list; do \
 426           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 427           echo "$$d$$p"; \
 428         done | $(am__base_list) | \
 429         while read files; do \
 430           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(sanincludedir)'"; \
 431           $(INSTALL_HEADER) $$files "$(DESTDIR)$(sanincludedir)" || exit $$?; \
 432         done
 433
 434 uninstall-nodist_sanincludeHEADERS:
 435         @$(NORMAL_UNINSTALL)
 436         @list='$(nodist_saninclude_HEADERS)'; test -n "$(sanincludedir)" || list=; \
 437         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 438         dir='$(DESTDIR)$(sanincludedir)'; $(am__uninstall_files_from_dir)
 439 install-nodist_toolexeclibHEADERS: $(nodist_toolexeclib_HEADERS)
 440         @$(NORMAL_INSTALL)
 441         @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
 442         if test -n "$$list"; then \
 443           echo " $(MKDIR_P) '$(DESTDIR)$(toolexeclibdir)'"; \
 444           $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)" || exit 1; \
 445         fi; \
 446         for p in $$list; do \
 447           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 448           echo "$$d$$p"; \
 449         done | $(am__base_list) | \
 450         while read files; do \
 451           echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(toolexeclibdir)'"; \
 452           $(INSTALL_HEADER) $$files "$(DESTDIR)$(toolexeclibdir)" || exit $$?; \
 453         done
 454
 455 uninstall-nodist_toolexeclibHEADERS:
 456         @$(NORMAL_UNINSTALL)
 457         @list='$(nodist_toolexeclib_HEADERS)'; test -n "$(toolexeclibdir)" || list=; \
 458         files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
 459         dir='$(DESTDIR)$(toolexeclibdir)'; $(am__uninstall_files_from_dir)
 460
 461 # This directory's subdirectories are mostly independent; you can cd
 462 # into them and run `make' without going through this Makefile.
 463 # To change the values of `make' variables: instead of editing Makefiles,
 464 # (1) if the variable is set in `config.status', edit `config.status'
 465 #     (which will cause the Makefiles to be regenerated when you run `make');
 466 # (2) otherwise, pass the desired values on the `make' command line.
 467 $(RECURSIVE_TARGETS):
 468         @fail= failcom='exit 1'; \
 469         for f in x $$MAKEFLAGS; do \
 470           case $$f in \
 471             *=* | --[!k]*);; \
 472             *k*) failcom='fail=yes';; \
 473           esac; \
 474         done; \
 475         dot_seen=no; \
 476         target=`echo $@ | sed s/-recursive//`; \
 477         list='$(SUBDIRS)'; for subdir in $$list; do \
 478           echo "Making $$target in $$subdir"; \
 479           if test "$$subdir" = "."; then \
 480             dot_seen=yes; \
 481             local_target="$$target-am"; \
 482           else \
 483             local_target="$$target"; \
 484           fi; \
 485           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 486           || eval $$failcom; \
 487         done; \
 488         if test "$$dot_seen" = "no"; then \
 489           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 490         fi; test -z "$$fail"
 491
 492 $(RECURSIVE_CLEAN_TARGETS):
 493         @fail= failcom='exit 1'; \
 494         for f in x $$MAKEFLAGS; do \
 495           case $$f in \
 496             *=* | --[!k]*);; \
 497             *k*) failcom='fail=yes';; \
 498           esac; \
 499         done; \
 500         dot_seen=no; \
 501         case "$@" in \
 502           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 503           *) list='$(SUBDIRS)' ;; \
 504         esac; \
 505         rev=''; for subdir in $$list; do \
 506           if test "$$subdir" = "."; then :; else \
 507             rev="$$subdir $$rev"; \
 508           fi; \
 509         done; \
 510         rev="$$rev ."; \
 511         target=`echo $@ | sed s/-recursive//`; \
 512         for subdir in $$rev; do \
 513           echo "Making $$target in $$subdir"; \
 514           if test "$$subdir" = "."; then \
 515             local_target="$$target-am"; \
 516           else \
 517             local_target="$$target"; \
 518           fi; \
 519           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 520           || eval $$failcom; \
 521         done && test -z "$$fail"
 522 tags-recursive:
 523         list='$(SUBDIRS)'; for subdir in $$list; do \
 524           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 525         done
 526 ctags-recursive:
 527         list='$(SUBDIRS)'; for subdir in $$list; do \
 528           test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 529         done
 530
 531 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 532         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 533         unique=`for i in $$list; do \
 534             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 535           done | \
 536           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 537               END { if (nonempty) { for (i in files) print i; }; }'`; \
 538         mkid -fID $$unique
 539 tags: TAGS
 540
 541 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 542                 $(TAGS_FILES) $(LISP)
 543         set x; \
 544         here=`pwd`; \
 545         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 546           include_option=--etags-include; \
 547           empty_fix=.; \
 548         else \
 549           include_option=--include; \
 550           empty_fix=; \
 551         fi; \
 552         list='$(SUBDIRS)'; for subdir in $$list; do \
 553           if test "$$subdir" = .; then :; else \
 554             test ! -f $$subdir/TAGS || \
 555               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 556           fi; \
 557         done; \
 558         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 559         unique=`for i in $$list; do \
 560             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 561           done | \
 562           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 563               END { if (nonempty) { for (i in files) print i; }; }'`; \
 564         shift; \
 565         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 566           test -n "$$unique" || unique=$$empty_fix; \
 567           if test $$# -gt 0; then \
 568             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 569               "$$@" $$unique; \
 570           else \
 571             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 572               $$unique; \
 573           fi; \
 574         fi
 575 ctags: CTAGS
 576 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
 577                 $(TAGS_FILES) $(LISP)
 578         list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
 579         unique=`for i in $$list; do \
 580             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 581           done | \
 582           $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
 583               END { if (nonempty) { for (i in files) print i; }; }'`; \
 584         test -z "$(CTAGS_ARGS)$$unique" \
 585           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 586              $$unique
 587
 588 GTAGS:
 589         here=`$(am__cd) $(top_builddir) && pwd` \
 590           && $(am__cd) $(top_srcdir) \
 591           && gtags -i $(GTAGS_ARGS) "$$here"
 592
 593 distclean-tags:
 594         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 595 check-am: all-am
 596 check: check-recursive
 597 all-am: Makefile all-multi $(HEADERS) config.h
 598 installdirs: installdirs-recursive
 599 installdirs-am:
 600         for dir in "$(DESTDIR)$(sanincludedir)" "$(DESTDIR)$(toolexeclibdir)"; do \
 601           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 602         done
 603 install: install-recursive
 604 install-exec: install-exec-recursive
 605 install-data: install-data-recursive
 606 uninstall: uninstall-recursive
 607
 608 install-am: all-am
 609         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 610
 611 installcheck: installcheck-recursive
 612 install-strip:
 613         if test -z '$(STRIP)'; then \
 614           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 615             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 616               install; \
 617         else \
 618           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 619             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 620             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 621         fi
 622 mostlyclean-generic:
 623
 624 clean-generic:
 625
 626 distclean-generic:
 627         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 628         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 629
 630 maintainer-clean-generic:
 631         @echo "This command is intended for maintainers to use"
 632         @echo "it deletes files that may require special tools to rebuild."
 633 clean: clean-multi clean-recursive
 634
 635 clean-am: clean-generic clean-libtool mostlyclean-am
 636
 637 distclean: distclean-multi distclean-recursive
 638         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 639         -rm -f Makefile
 640 distclean-am: clean-am distclean-generic distclean-hdr \
 641         distclean-libtool distclean-tags
 642
 643 dvi: dvi-recursive
 644
 645 dvi-am:
 646
 647 html: html-recursive
 648
 649 html-am:
 650
 651 info: info-recursive
 652
 653 info-am:
 654
 655 install-data-am: install-nodist_sanincludeHEADERS
 656
 657 install-dvi: install-dvi-recursive
 658
 659 install-dvi-am:
 660
 661 install-exec-am: install-multi install-nodist_toolexeclibHEADERS
 662
 663 install-html: install-html-recursive
 664
 665 install-html-am:
 666
 667 install-info: install-info-recursive
 668
 669 install-info-am:
 670
 671 install-man:
 672
 673 install-pdf: install-pdf-recursive
 674
 675 install-pdf-am:
 676
 677 install-ps: install-ps-recursive
 678
 679 install-ps-am:
 680
 681 installcheck-am:
 682
 683 maintainer-clean: maintainer-clean-multi maintainer-clean-recursive
 684         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 685         -rm -rf $(top_srcdir)/autom4te.cache
 686         -rm -f Makefile
 687 maintainer-clean-am: distclean-am maintainer-clean-generic
 688
 689 mostlyclean: mostlyclean-multi mostlyclean-recursive
 690
 691 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 692
 693 pdf: pdf-recursive
 694
 695 pdf-am:
 696
 697 ps: ps-recursive
 698
 699 ps-am:
 700
 701 uninstall-am: uninstall-nodist_sanincludeHEADERS \
 702         uninstall-nodist_toolexeclibHEADERS
 703
 704 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all all-multi \
 705         clean-multi ctags-recursive distclean-multi install-am \
 706         install-multi install-strip maintainer-clean-multi \
 707         mostlyclean-multi tags-recursive
 708
 709 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
 710         all all-am all-multi am--refresh check check-am clean \
 711         clean-generic clean-libtool clean-multi ctags ctags-recursive \
 712         distclean distclean-generic distclean-hdr distclean-libtool \
 713         distclean-multi distclean-tags dvi dvi-am html html-am info \
 714         info-am install install-am install-data install-data-am \
 715         install-dvi install-dvi-am install-exec install-exec-am \
 716         install-html install-html-am install-info install-info-am \
 717         install-man install-multi install-nodist_sanincludeHEADERS \
 718         install-nodist_toolexeclibHEADERS install-pdf install-pdf-am \
 719         install-ps install-ps-am install-strip installcheck \
 720         installcheck-am installdirs installdirs-am maintainer-clean \
 721         maintainer-clean-generic maintainer-clean-multi mostlyclean \
 722         mostlyclean-generic mostlyclean-libtool mostlyclean-multi pdf \
 723         pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
 724         uninstall-nodist_sanincludeHEADERS \
 725         uninstall-nodist_toolexeclibHEADERS
 726
 727
 728 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 729 # Otherwise a system limit (for SysV at least) may be exceeded.
 730 .NOEXPORT: