2 This is a version (aka dlmalloc) of malloc/free/realloc written by
3 Doug Lea and released to the public domain, as explained at
4 http://creativecommons.org/licenses/publicdomain. Send questions,
5 comments, complaints, performance data, etc to dl@cs.oswego.edu
7 * Version 2.8.3 Thu Sep 22 11:16:15 2005 Doug Lea (dl at gee)
9 Note: There may be an updated version of this malloc obtainable at
10 ftp://gee.cs.oswego.edu/pub/misc/malloc.c
11 Check before installing!
15 This library is all in one file to simplify the most common usage:
16 ftp it, compile it (-O3), and link it into another program. All of
17 the compile-time options default to reasonable values for use on
18 most platforms. You might later want to step through various
19 compile-time and dynamic tuning options.
21 For convenience, an include file for code using this malloc is at:
22 ftp://gee.cs.oswego.edu/pub/misc/malloc-2.8.3.h
23 You don't really need this .h file unless you call functions not
24 defined in your system include files. The .h file contains only the
25 excerpts from this file needed for using this malloc on ANSI C/C++
26 systems, so long as you haven't changed compile-time options about
27 naming and tuning parameters. If you do, then you can create your
28 own malloc.h that does include all settings by cutting at the point
29 indicated below. Note that you may already by default be using a C
30 library containing a malloc that is based on some version of this
31 malloc (for example in linux). You might still want to use the one
32 in this file to customize settings or to avoid overheads associated
33 with library versions.
37 Supported pointer/size_t representation: 4 or 8 bytes
38 size_t MUST be an unsigned type of the same width as
39 pointers. (If you are using an ancient system that declares
40 size_t as a signed type, or need it to be a different width
41 than pointers, you can use a previous release of this malloc
42 (e.g. 2.7.2) supporting these.)
44 Alignment: 8 bytes (default)
45 This suffices for nearly all current machines and C compilers.
46 However, you can define MALLOC_ALIGNMENT to be wider than this
47 if necessary (up to 128bytes), at the expense of using more space.
49 Minimum overhead per allocated chunk: 4 or 8 bytes (if 4byte sizes)
50 8 or 16 bytes (if 8byte sizes)
51 Each malloced chunk has a hidden word of overhead holding size
52 and status information, and additional cross-check word
53 if FOOTERS is defined.
55 Minimum allocated size: 4-byte ptrs: 16 bytes (including overhead)
56 8-byte ptrs: 32 bytes (including overhead)
58 Even a request for zero bytes (i.e., malloc(0)) returns a
59 pointer to something of the minimum allocatable size.
60 The maximum overhead wastage (i.e., number of extra bytes
61 allocated than were requested in malloc) is less than or equal
62 to the minimum size, except for requests >= mmap_threshold that
63 are serviced via mmap(), where the worst case wastage is about
64 32 bytes plus the remainder from a system page (the minimal
65 mmap unit); typically 4096 or 8192 bytes.
67 Security: static-safe; optionally more or less
68 The "security" of malloc refers to the ability of malicious
69 code to accentuate the effects of errors (for example, freeing
70 space that is not currently malloc'ed or overwriting past the
71 ends of chunks) in code that calls malloc. This malloc
72 guarantees not to modify any memory locations below the base of
73 heap, i.e., static variables, even in the presence of usage
74 errors. The routines additionally detect most improper frees
75 and reallocs. All this holds as long as the static bookkeeping
76 for malloc itself is not corrupted by some other means. This
77 is only one aspect of security -- these checks do not, and
78 cannot, detect all possible programming errors.
80 If FOOTERS is defined nonzero, then each allocated chunk
81 carries an additional check word to verify that it was malloced
82 from its space. These check words are the same within each
83 execution of a program using malloc, but differ across
84 executions, so externally crafted fake chunks cannot be
85 freed. This improves security by rejecting frees/reallocs that
86 could corrupt heap memory, in addition to the checks preventing
87 writes to statics that are always on. This may further improve
88 security at the expense of time and space overhead. (Note that
89 FOOTERS may also be worth using with MSPACES.)
91 By default detected errors cause the program to abort (calling
92 "abort()"). You can override this to instead proceed past
93 errors by defining PROCEED_ON_ERROR. In this case, a bad free
94 has no effect, and a malloc that encounters a bad address
95 caused by user overwrites will ignore the bad address by
96 dropping pointers and indices to all known memory. This may
97 be appropriate for programs that should continue if at all
98 possible in the face of programming errors, although they may
99 run out of memory because dropped memory is never reclaimed.
101 If you don't like either of these options, you can define
102 CORRUPTION_ERROR_ACTION and USAGE_ERROR_ACTION to do anything
103 else. And if if you are sure that your program using malloc has
104 no errors or vulnerabilities, you can define INSECURE to 1,
105 which might (or might not) provide a small performance improvement.
107 Thread-safety: NOT thread-safe unless USE_LOCKS defined
108 When USE_LOCKS is defined, each public call to malloc, free,
109 etc is surrounded with either a pthread mutex or a win32
110 spinlock (depending on WIN32). This is not especially fast, and
111 can be a major bottleneck. It is designed only to provide
112 minimal protection in concurrent environments, and to provide a
113 basis for extensions. If you are using malloc in a concurrent
114 program, consider instead using ptmalloc, which is derived from
115 a version of this malloc. (See http://www.malloc.de).
117 System requirements: Any combination of MORECORE and/or MMAP/MUNMAP
118 This malloc can use unix sbrk or any emulation (invoked using
119 the CALL_MORECORE macro) and/or mmap/munmap or any emulation
120 (invoked using CALL_MMAP/CALL_MUNMAP) to get and release system
121 memory. On most unix systems, it tends to work best if both
122 MORECORE and MMAP are enabled. On Win32, it uses emulations
123 based on VirtualAlloc. It also uses common C library functions
126 Compliance: I believe it is compliant with the Single Unix Specification
127 (See http://www.unix.org). Also SVID/XPG, ANSI C, and probably
130 * Overview of algorithms
132 This is not the fastest, most space-conserving, most portable, or
133 most tunable malloc ever written. However it is among the fastest
134 while also being among the most space-conserving, portable and
135 tunable. Consistent balance across these factors results in a good
136 general-purpose allocator for malloc-intensive programs.
138 In most ways, this malloc is a best-fit allocator. Generally, it
139 chooses the best-fitting existing chunk for a request, with ties
140 broken in approximately least-recently-used order. (This strategy
141 normally maintains low fragmentation.) However, for requests less
142 than 256bytes, it deviates from best-fit when there is not an
143 exactly fitting available chunk by preferring to use space adjacent
144 to that used for the previous small request, as well as by breaking
145 ties in approximately most-recently-used order. (These enhance
146 locality of series of small allocations.) And for very large requests
147 (>= 256Kb by default), it relies on system memory mapping
148 facilities, if supported. (This helps avoid carrying around and
149 possibly fragmenting memory used only for large chunks.)
151 All operations (except malloc_stats and mallinfo) have execution
152 times that are bounded by a constant factor of the number of bits in
153 a size_t, not counting any clearing in calloc or copying in realloc,
154 or actions surrounding MORECORE and MMAP that have times
155 proportional to the number of non-contiguous regions returned by
156 system allocation routines, which is often just 1.
158 The implementation is not very modular and seriously overuses
159 macros. Perhaps someday all C compilers will do as good a job
160 inlining modular code as can now be done by brute-force expansion,
161 but now, enough of them seem not to.
163 Some compilers issue a lot of warnings about code that is
164 dead/unreachable only on some platforms, and also about intentional
165 uses of negation on unsigned types. All known cases of each can be
168 For a longer but out of date high-level description, see
169 http://gee.cs.oswego.edu/dl/html/malloc.html
172 If MSPACES is defined, then in addition to malloc, free, etc.,
173 this file also defines mspace_malloc, mspace_free, etc. These
174 are versions of malloc routines that take an "mspace" argument
175 obtained using create_mspace, to control all internal bookkeeping.
176 If ONLY_MSPACES is defined, only these versions are compiled.
177 So if you would like to use this allocator for only some allocations,
178 and your system malloc for others, you can compile with
179 ONLY_MSPACES and then do something like...
180 static mspace mymspace = create_mspace(0,0); // for example
181 #define mymalloc(bytes) mspace_malloc(mymspace, bytes)
183 (Note: If you only need one instance of an mspace, you can instead
184 use "USE_DL_PREFIX" to relabel the global malloc.)
186 You can similarly create thread-local allocators by storing
187 mspaces as thread-locals. For example:
188 static __thread mspace tlms = 0;
189 void* tlmalloc(size_t bytes) {
190 if (tlms == 0) tlms = create_mspace(0, 0);
191 return mspace_malloc(tlms, bytes);
193 void tlfree(void* mem) { mspace_free(tlms, mem); }
195 Unless FOOTERS is defined, each mspace is completely independent.
196 You cannot allocate from one and free to another (although
197 conformance is only weakly checked, so usage errors are not always
198 caught). If FOOTERS is defined, then each chunk carries around a tag
199 indicating its originating mspace, and frees are directed to their
202 ------------------------- Compile-time options ---------------------------
204 Be careful in setting #define values for numerical constants of type
205 size_t. On some systems, literal values are not automatically extended
206 to size_t precision unless they are explicitly casted.
208 WIN32 default: defined if _WIN32 defined
209 Defining WIN32 sets up defaults for MS environment and compilers.
210 Otherwise defaults are for unix.
212 MALLOC_ALIGNMENT default: (size_t)8
213 Controls the minimum alignment for malloc'ed chunks. It must be a
214 power of two and at least 8, even on machines for which smaller
215 alignments would suffice. It may be defined as larger than this
216 though. Note however that code and data structures are optimized for
217 the case of 8-byte alignment.
219 MSPACES default: 0 (false)
220 If true, compile in support for independent allocation spaces.
221 This is only supported if HAVE_MMAP is true.
223 ONLY_MSPACES default: 0 (false)
224 If true, only compile in mspace versions, not regular versions.
226 USE_LOCKS default: 0 (false)
227 Causes each call to each public routine to be surrounded with
228 pthread or WIN32 mutex lock/unlock. (If set true, this can be
229 overridden on a per-mspace basis for mspace versions.)
232 If true, provide extra checking and dispatching by placing
233 information in the footers of allocated chunks. This adds
234 space and time overhead.
237 If true, omit checks for usage errors and heap space overwrites.
239 USE_DL_PREFIX default: NOT defined
240 Causes compiler to prefix all public routines with the string 'dl'.
241 This can be useful when you only want to use this malloc in one part
242 of a program, using your regular system malloc elsewhere.
244 ABORT default: defined as abort()
245 Defines how to abort on failed checks. On most systems, a failed
246 check cannot die with an "assert" or even print an informative
247 message, because the underlying print routines in turn call malloc,
248 which will fail again. Generally, the best policy is to simply call
249 abort(). It's not very useful to do more than this because many
250 errors due to overwriting will show up as address faults (null, odd
251 addresses etc) rather than malloc-triggered checks, so will also
252 abort. Also, most compilers know that abort() does not return, so
253 can better optimize code conditionally calling it.
255 PROCEED_ON_ERROR default: defined as 0 (false)
256 Controls whether detected bad addresses cause them to bypassed
257 rather than aborting. If set, detected bad arguments to free and
258 realloc are ignored. And all bookkeeping information is zeroed out
259 upon a detected overwrite of freed heap space, thus losing the
260 ability to ever return it from malloc again, but enabling the
261 application to proceed. If PROCEED_ON_ERROR is defined, the
262 static variable malloc_corruption_error_count is compiled in
263 and can be examined to see if errors have occurred. This option
264 generates slower code than the default abort policy.
266 DEBUG default: NOT defined
267 The DEBUG setting is mainly intended for people trying to modify
268 this code or diagnose problems when porting to new platforms.
269 However, it may also be able to better isolate user errors than just
270 using runtime checks. The assertions in the check routines spell
271 out in more detail the assumptions and invariants underlying the
272 algorithms. The checking is fairly extensive, and will slow down
273 execution noticeably. Calling malloc_stats or mallinfo with DEBUG
274 set will attempt to check every non-mmapped allocated and free chunk
275 in the course of computing the summaries.
277 ABORT_ON_ASSERT_FAILURE default: defined as 1 (true)
278 Debugging assertion failures can be nearly impossible if your
279 version of the assert macro causes malloc to be called, which will
280 lead to a cascade of further failures, blowing the runtime stack.
281 ABORT_ON_ASSERT_FAILURE cause assertions failures to call abort(),
282 which will usually make debugging easier.
284 MALLOC_FAILURE_ACTION default: sets errno to ENOMEM, or no-op on win32
285 The action to take before "return 0" when malloc fails to be able to
286 return memory because there is none available.
288 HAVE_MORECORE default: 1 (true) unless win32 or ONLY_MSPACES
289 True if this system supports sbrk or an emulation of it.
291 MORECORE default: sbrk
292 The name of the sbrk-style system routine to call to obtain more
293 memory. See below for guidance on writing custom MORECORE
294 functions. The type of the argument to sbrk/MORECORE varies across
295 systems. It cannot be size_t, because it supports negative
296 arguments, so it is normally the signed type of the same width as
297 size_t (sometimes declared as "intptr_t"). It doesn't much matter
298 though. Internally, we only call it with arguments less than half
299 the max value of a size_t, which should work across all reasonable
300 possibilities, although sometimes generating compiler warnings. See
301 near the end of this file for guidelines for creating a custom
304 MORECORE_CONTIGUOUS default: 1 (true)
305 If true, take advantage of fact that consecutive calls to MORECORE
306 with positive arguments always return contiguous increasing
307 addresses. This is true of unix sbrk. It does not hurt too much to
308 set it true anyway, since malloc copes with non-contiguities.
309 Setting it false when definitely non-contiguous saves time
310 and possibly wasted space it would take to discover this though.
312 MORECORE_CANNOT_TRIM default: NOT defined
313 True if MORECORE cannot release space back to the system when given
314 negative arguments. This is generally necessary only if you are
315 using a hand-crafted MORECORE function that cannot handle negative
318 HAVE_MMAP default: 1 (true)
319 True if this system supports mmap or an emulation of it. If so, and
320 HAVE_MORECORE is not true, MMAP is used for all system
321 allocation. If set and HAVE_MORECORE is true as well, MMAP is
322 primarily used to directly allocate very large blocks. It is also
323 used as a backup strategy in cases where MORECORE fails to provide
324 space from system. Note: A single call to MUNMAP is assumed to be
325 able to unmap memory that may have be allocated using multiple calls
326 to MMAP, so long as they are adjacent.
328 HAVE_MREMAP default: 1 on linux, else 0
329 If true realloc() uses mremap() to re-allocate large blocks and
330 extend or shrink allocation spaces.
332 MMAP_CLEARS default: 1 on unix
333 True if mmap clears memory so calloc doesn't need to. This is true
334 for standard unix mmap using /dev/zero.
336 USE_BUILTIN_FFS default: 0 (i.e., not used)
337 Causes malloc to use the builtin ffs() function to compute indices.
338 Some compilers may recognize and intrinsify ffs to be faster than the
339 supplied C version. Also, the case of x86 using gcc is special-cased
340 to an asm instruction, so is already as fast as it can be, and so
341 this setting has no effect. (On most x86s, the asm version is only
342 slightly faster than the C version.)
344 malloc_getpagesize default: derive from system includes, or 4096.
345 The system page size. To the extent possible, this malloc manages
346 memory from the system in page-size units. This may be (and
347 usually is) a function rather than a constant. This is ignored
348 if WIN32, where page size is determined using getSystemInfo during
351 USE_DEV_RANDOM default: 0 (i.e., not used)
352 Causes malloc to use /dev/random to initialize secure magic seed for
353 stamping footers. Otherwise, the current time is used.
355 NO_MALLINFO default: 0
356 If defined, don't compile "mallinfo". This can be a simple way
357 of dealing with mismatches between system declarations and
360 MALLINFO_FIELD_TYPE default: size_t
361 The type of the fields in the mallinfo struct. This was originally
362 defined as "int" in SVID etc, but is more usefully defined as
363 size_t. The value is used only if HAVE_USR_INCLUDE_MALLOC_H is not set
365 REALLOC_ZERO_BYTES_FREES default: not defined
366 This should be set if a call to realloc with zero bytes should
367 be the same as a call to free. Some people think it should. Otherwise,
368 since this malloc returns a unique pointer for malloc(0), so does
371 LACKS_UNISTD_H, LACKS_FCNTL_H, LACKS_SYS_PARAM_H, LACKS_SYS_MMAN_H
372 LACKS_STRINGS_H, LACKS_STRING_H, LACKS_SYS_TYPES_H, LACKS_ERRNO_H
373 LACKS_STDLIB_H default: NOT defined unless on WIN32
374 Define these if your system does not have these header files.
375 You might need to manually insert some of the declarations they provide.
377 DEFAULT_GRANULARITY default: page size if MORECORE_CONTIGUOUS,
378 system_info.dwAllocationGranularity in WIN32,
380 Also settable using mallopt(M_GRANULARITY, x)
381 The unit for allocating and deallocating memory from the system. On
382 most systems with contiguous MORECORE, there is no reason to
383 make this more than a page. However, systems with MMAP tend to
384 either require or encourage larger granularities. You can increase
385 this value to prevent system allocation functions to be called so
386 often, especially if they are slow. The value must be at least one
387 page and must be a power of two. Setting to 0 causes initialization
388 to either page size or win32 region size. (Note: In previous
389 versions of malloc, the equivalent of this option was called
392 DEFAULT_TRIM_THRESHOLD default: 2MB
393 Also settable using mallopt(M_TRIM_THRESHOLD, x)
394 The maximum amount of unused top-most memory to keep before
395 releasing via malloc_trim in free(). Automatic trimming is mainly
396 useful in long-lived programs using contiguous MORECORE. Because
397 trimming via sbrk can be slow on some systems, and can sometimes be
398 wasteful (in cases where programs immediately afterward allocate
399 more large chunks) the value should be high enough so that your
400 overall system performance would improve by releasing this much
401 memory. As a rough guide, you might set to a value close to the
402 average size of a process (program) running on your system.
403 Releasing this much memory would allow such a process to run in
404 memory. Generally, it is worth tuning trim thresholds when a
405 program undergoes phases where several large chunks are allocated
406 and released in ways that can reuse each other's storage, perhaps
407 mixed with phases where there are no such chunks at all. The trim
408 value must be greater than page size to have any useful effect. To
409 disable trimming completely, you can set to MAX_SIZE_T. Note that the trick
410 some people use of mallocing a huge space and then freeing it at
411 program startup, in an attempt to reserve system memory, doesn't
412 have the intended effect under automatic trimming, since that memory
413 will immediately be returned to the system.
415 DEFAULT_MMAP_THRESHOLD default: 256K
416 Also settable using mallopt(M_MMAP_THRESHOLD, x)
417 The request size threshold for using MMAP to directly service a
418 request. Requests of at least this size that cannot be allocated
419 using already-existing space will be serviced via mmap. (If enough
420 normal freed space already exists it is used instead.) Using mmap
421 segregates relatively large chunks of memory so that they can be
422 individually obtained and released from the host system. A request
423 serviced through mmap is never reused by any other request (at least
424 not directly; the system may just so happen to remap successive
425 requests to the same locations). Segregating space in this way has
426 the benefits that: Mmapped space can always be individually released
427 back to the system, which helps keep the system level memory demands
428 of a long-lived program low. Also, mapped memory doesn't become
429 `locked' between other chunks, as can happen with normally allocated
430 chunks, which means that even trimming via malloc_trim would not
431 release them. However, it has the disadvantage that the space
432 cannot be reclaimed, consolidated, and then used to service later
433 requests, as happens with normal chunks. The advantages of mmap
434 nearly always outweigh disadvantages for "large" chunks, but the
435 value of "large" may vary across systems. The default is an
436 empirically derived value that works well in most systems. You can
437 disable mmap by setting to MAX_SIZE_T.
447 #define WIN32_LEAN_AND_MEAN
450 #define HAVE_MORECORE 0
451 #define LACKS_UNISTD_H
452 #define LACKS_SYS_PARAM_H
453 #define LACKS_SYS_MMAN_H
454 #define LACKS_STRING_H
455 #define LACKS_STRINGS_H
456 #define LACKS_SYS_TYPES_H
457 #define LACKS_ERRNO_H
458 #define MALLOC_FAILURE_ACTION
459 #define MMAP_CLEARS 0 /* WINCE and some others apparently don't clear */
466 #define HAVE_MORECORE 0
467 #define LACKS_SYS_MMAN_H
470 #if defined(DARWIN) || defined(_DARWIN)
471 /* Mac OSX docs advise not to use sbrk; it seems better to use mmap */
472 #ifndef HAVE_MORECORE
473 #define HAVE_MORECORE 0
475 #endif /* HAVE_MORECORE */
478 #ifndef LACKS_SYS_TYPES_H
479 #include <sys/types.h> /* For size_t */
480 #endif /* LACKS_SYS_TYPES_H */
482 /* The maximum possible size_t value has all bits set */
483 #define MAX_SIZE_T (~(size_t)0)
486 #define ONLY_MSPACES 0
487 #endif /* ONLY_MSPACES */
491 #else /* ONLY_MSPACES */
493 #endif /* ONLY_MSPACES */
495 #ifndef MALLOC_ALIGNMENT
496 #define MALLOC_ALIGNMENT ((size_t)8U)
497 #endif /* MALLOC_ALIGNMENT */
502 #define ABORT abort()
504 #ifndef ABORT_ON_ASSERT_FAILURE
505 #define ABORT_ON_ASSERT_FAILURE 1
506 #endif /* ABORT_ON_ASSERT_FAILURE */
507 #ifndef PROCEED_ON_ERROR
508 #define PROCEED_ON_ERROR 0
509 #endif /* PROCEED_ON_ERROR */
512 #endif /* USE_LOCKS */
515 #endif /* INSECURE */
518 #endif /* HAVE_MMAP */
520 #define MMAP_CLEARS 1
521 #endif /* MMAP_CLEARS */
524 #define HAVE_MREMAP 1
526 #define HAVE_MREMAP 0
528 #endif /* HAVE_MREMAP */
529 #ifndef MALLOC_FAILURE_ACTION
530 #define MALLOC_FAILURE_ACTION errno = ENOMEM;
531 #endif /* MALLOC_FAILURE_ACTION */
532 #ifndef HAVE_MORECORE
534 #define HAVE_MORECORE 0
535 #else /* ONLY_MSPACES */
536 #define HAVE_MORECORE 1
537 #endif /* ONLY_MSPACES */
538 #endif /* HAVE_MORECORE */
540 #define MORECORE_CONTIGUOUS 0
541 #else /* !HAVE_MORECORE */
543 #define MORECORE sbrk
544 #endif /* MORECORE */
545 #ifndef MORECORE_CONTIGUOUS
546 #define MORECORE_CONTIGUOUS 1
547 #endif /* MORECORE_CONTIGUOUS */
548 #endif /* HAVE_MORECORE */
549 #ifndef DEFAULT_GRANULARITY
550 #if MORECORE_CONTIGUOUS
551 #define DEFAULT_GRANULARITY (0) /* 0 means to compute in init_mparams */
552 #else /* MORECORE_CONTIGUOUS */
553 #define DEFAULT_GRANULARITY ((size_t)64U * (size_t)1024U)
554 #endif /* MORECORE_CONTIGUOUS */
555 #endif /* DEFAULT_GRANULARITY */
556 #ifndef DEFAULT_TRIM_THRESHOLD
557 #ifndef MORECORE_CANNOT_TRIM
558 #define DEFAULT_TRIM_THRESHOLD ((size_t)2U * (size_t)1024U * (size_t)1024U)
559 #else /* MORECORE_CANNOT_TRIM */
560 #define DEFAULT_TRIM_THRESHOLD MAX_SIZE_T
561 #endif /* MORECORE_CANNOT_TRIM */
562 #endif /* DEFAULT_TRIM_THRESHOLD */
563 #ifndef DEFAULT_MMAP_THRESHOLD
565 #define DEFAULT_MMAP_THRESHOLD ((size_t)256U * (size_t)1024U)
566 #else /* HAVE_MMAP */
567 #define DEFAULT_MMAP_THRESHOLD MAX_SIZE_T
568 #endif /* HAVE_MMAP */
569 #endif /* DEFAULT_MMAP_THRESHOLD */
570 #ifndef USE_BUILTIN_FFS
571 #define USE_BUILTIN_FFS 0
572 #endif /* USE_BUILTIN_FFS */
573 #ifndef USE_DEV_RANDOM
574 #define USE_DEV_RANDOM 0
575 #endif /* USE_DEV_RANDOM */
577 #define NO_MALLINFO 0
578 #endif /* NO_MALLINFO */
579 #ifndef MALLINFO_FIELD_TYPE
580 #define MALLINFO_FIELD_TYPE size_t
581 #endif /* MALLINFO_FIELD_TYPE */
584 mallopt tuning options. SVID/XPG defines four standard parameter
585 numbers for mallopt, normally defined in malloc.h. None of these
586 are used in this malloc, so setting them has no effect. But this
587 malloc does support the following options.
590 #define M_TRIM_THRESHOLD (-1)
591 #define M_GRANULARITY (-2)
592 #define M_MMAP_THRESHOLD (-3)
594 /* ------------------------ Mallinfo declarations ------------------------ */
598 This version of malloc supports the standard SVID/XPG mallinfo
599 routine that returns a struct containing usage properties and
600 statistics. It should work on any system that has a
601 /usr/include/malloc.h defining struct mallinfo. The main
602 declaration needed is the mallinfo struct that is returned (by-copy)
603 by mallinfo(). The malloinfo struct contains a bunch of fields that
604 are not even meaningful in this version of malloc. These fields are
605 are instead filled by mallinfo() with other numbers that might be of
608 HAVE_USR_INCLUDE_MALLOC_H should be set if you have a
609 /usr/include/malloc.h file that includes a declaration of struct
610 mallinfo. If so, it is included; else a compliant version is
611 declared below. These must be precisely the same for mallinfo() to
612 work. The original SVID version of this struct, defined on most
613 systems with mallinfo, declares all fields as ints. But some others
614 define as unsigned long. If your system defines the fields using a
615 type of different width than listed here, you MUST #include your
616 system version and #define HAVE_USR_INCLUDE_MALLOC_H.
619 /* #define HAVE_USR_INCLUDE_MALLOC_H */
621 #ifdef HAVE_USR_INCLUDE_MALLOC_H
622 #include "/usr/include/malloc.h"
623 #else /* HAVE_USR_INCLUDE_MALLOC_H */
625 /* HP-UX's stdlib.h redefines mallinfo unless _STRUCT_MALLINFO is defined */
626 #define _STRUCT_MALLINFO
629 MALLINFO_FIELD_TYPE arena
; /* non-mmapped space allocated from system */
630 MALLINFO_FIELD_TYPE ordblks
; /* number of free chunks */
631 MALLINFO_FIELD_TYPE smblks
; /* always 0 */
632 MALLINFO_FIELD_TYPE hblks
; /* always 0 */
633 MALLINFO_FIELD_TYPE hblkhd
; /* space in mmapped regions */
634 MALLINFO_FIELD_TYPE usmblks
; /* maximum total allocated space */
635 MALLINFO_FIELD_TYPE fsmblks
; /* always 0 */
636 MALLINFO_FIELD_TYPE uordblks
; /* total allocated space */
637 MALLINFO_FIELD_TYPE fordblks
; /* total free space */
638 MALLINFO_FIELD_TYPE keepcost
; /* releasable (via malloc_trim) space */
641 #endif /* HAVE_USR_INCLUDE_MALLOC_H */
642 #endif /* NO_MALLINFO */
646 #endif /* __cplusplus */
650 /* ------------------- Declarations of public routines ------------------- */
652 #ifndef USE_DL_PREFIX
653 #define dlcalloc calloc
655 #define dlmalloc malloc
656 #define dlmemalign memalign
657 #define dlrealloc realloc
658 #define dlvalloc valloc
659 #define dlpvalloc pvalloc
660 #define dlmallinfo mallinfo
661 #define dlmallopt mallopt
662 #define dlmalloc_trim malloc_trim
663 #define dlmalloc_stats malloc_stats
664 #define dlmalloc_usable_size malloc_usable_size
665 #define dlmalloc_footprint malloc_footprint
666 #define dlmalloc_max_footprint malloc_max_footprint
667 #define dlindependent_calloc independent_calloc
668 #define dlindependent_comalloc independent_comalloc
669 #endif /* USE_DL_PREFIX */
674 Returns a pointer to a newly allocated chunk of at least n bytes, or
675 null if no space is available, in which case errno is set to ENOMEM
678 If n is zero, malloc returns a minimum-sized chunk. (The minimum
679 size is 16 bytes on most 32bit systems, and 32 bytes on 64bit
680 systems.) Note that size_t is an unsigned type, so calls with
681 arguments that would be negative if signed are interpreted as
682 requests for huge amounts of space, which will often fail. The
683 maximum supported value of n differs across systems, but is in all
684 cases less than the maximum representable value of a size_t.
686 void* dlmalloc(size_t);
690 Releases the chunk of memory pointed to by p, that had been previously
691 allocated using malloc or a related routine such as realloc.
692 It has no effect if p is null. If p was not malloced or already
693 freed, free(p) will by default cause the current program to abort.
698 calloc(size_t n_elements, size_t element_size);
699 Returns a pointer to n_elements * element_size bytes, with all locations
702 void* dlcalloc(size_t, size_t);
705 realloc(void* p, size_t n)
706 Returns a pointer to a chunk of size n that contains the same data
707 as does chunk p up to the minimum of (n, p's size) bytes, or null
708 if no space is available.
710 The returned pointer may or may not be the same as p. The algorithm
711 prefers extending p in most cases when possible, otherwise it
712 employs the equivalent of a malloc-copy-free sequence.
714 If p is null, realloc is equivalent to malloc.
716 If space is not available, realloc returns null, errno is set (if on
717 ANSI) and p is NOT freed.
719 if n is for fewer bytes than already held by p, the newly unused
720 space is lopped off and freed if possible. realloc with a size
721 argument of zero (re)allocates a minimum-sized chunk.
723 The old unix realloc convention of allowing the last-free'd chunk
724 to be used as an argument to realloc is not supported.
727 void* dlrealloc(void*, size_t);
730 memalign(size_t alignment, size_t n);
731 Returns a pointer to a newly allocated chunk of n bytes, aligned
732 in accord with the alignment argument.
734 The alignment argument should be a power of two. If the argument is
735 not a power of two, the nearest greater power is used.
736 8-byte alignment is guaranteed by normal malloc calls, so don't
737 bother calling memalign with an argument of 8 or less.
739 Overreliance on memalign is a sure way to fragment space.
741 void* dlmemalign(size_t, size_t);
745 Equivalent to memalign(pagesize, n), where pagesize is the page
746 size of the system. If the pagesize is unknown, 4096 is used.
748 void* dlvalloc(size_t);
751 mallopt(int parameter_number, int parameter_value)
752 Sets tunable parameters The format is to provide a
753 (parameter-number, parameter-value) pair. mallopt then sets the
754 corresponding parameter to the argument value if it can (i.e., so
755 long as the value is meaningful), and returns 1 if successful else
756 0. SVID/XPG/ANSI defines four standard param numbers for mallopt,
757 normally defined in malloc.h. None of these are use in this malloc,
758 so setting them has no effect. But this malloc also supports other
759 options in mallopt. See below for details. Briefly, supported
760 parameters are as follows (listed defaults are for "typical"
763 Symbol param # default allowed param values
764 M_TRIM_THRESHOLD -1 2*1024*1024 any (MAX_SIZE_T disables)
765 M_GRANULARITY -2 page size any power of 2 >= page size
766 M_MMAP_THRESHOLD -3 256*1024 any (or 0 if no MMAP support)
768 int dlmallopt(int, int);
772 Returns the number of bytes obtained from the system. The total
773 number of bytes allocated by malloc, realloc etc., is less than this
774 value. Unlike mallinfo, this function returns only a precomputed
775 result, so can be called frequently to monitor memory consumption.
776 Even if locks are otherwise defined, this function does not use them,
777 so results might not be up to date.
779 size_t dlmalloc_footprint(void);
782 malloc_max_footprint();
783 Returns the maximum number of bytes obtained from the system. This
784 value will be greater than current footprint if deallocated space
785 has been reclaimed by the system. The peak number of bytes allocated
786 by malloc, realloc etc., is less than this value. Unlike mallinfo,
787 this function returns only a precomputed result, so can be called
788 frequently to monitor memory consumption. Even if locks are
789 otherwise defined, this function does not use them, so results might
792 size_t dlmalloc_max_footprint(void);
797 Returns (by copy) a struct containing various summary statistics:
799 arena: current total non-mmapped bytes allocated from system
800 ordblks: the number of free chunks
802 hblks: current number of mmapped regions
803 hblkhd: total bytes held in mmapped regions
804 usmblks: the maximum total allocated space. This will be greater
805 than current total if trimming has occurred.
807 uordblks: current total allocated space (normal or mmapped)
808 fordblks: total free space
809 keepcost: the maximum number of bytes that could ideally be released
810 back to system via malloc_trim. ("ideally" means that
811 it ignores page restrictions etc.)
813 Because these fields are ints, but internal bookkeeping may
814 be kept as longs, the reported values may wrap around zero and
817 struct mallinfo
dlmallinfo(void);
818 #endif /* NO_MALLINFO */
821 independent_calloc(size_t n_elements, size_t element_size, void* chunks[]);
823 independent_calloc is similar to calloc, but instead of returning a
824 single cleared space, it returns an array of pointers to n_elements
825 independent elements that can hold contents of size elem_size, each
826 of which starts out cleared, and can be independently freed,
827 realloc'ed etc. The elements are guaranteed to be adjacently
828 allocated (this is not guaranteed to occur with multiple callocs or
829 mallocs), which may also improve cache locality in some
832 The "chunks" argument is optional (i.e., may be null, which is
833 probably the most typical usage). If it is null, the returned array
834 is itself dynamically allocated and should also be freed when it is
835 no longer needed. Otherwise, the chunks array must be of at least
836 n_elements in length. It is filled in with the pointers to the
839 In either case, independent_calloc returns this pointer array, or
840 null if the allocation failed. If n_elements is zero and "chunks"
841 is null, it returns a chunk representing an array with zero elements
842 (which should be freed if not wanted).
844 Each element must be individually freed when it is no longer
845 needed. If you'd like to instead be able to free all at once, you
846 should instead use regular calloc and assign pointers into this
847 space to represent elements. (In this case though, you cannot
848 independently free elements.)
850 independent_calloc simplifies and speeds up implementations of many
851 kinds of pools. It may also be useful when constructing large data
852 structures that initially have a fixed number of fixed-sized nodes,
853 but the number is not known at compile time, and some of the nodes
854 may later need to be freed. For example:
856 struct Node { int item; struct Node* next; };
858 struct Node* build_list() {
860 int n = read_number_of_nodes_needed();
861 if (n <= 0) return 0;
862 pool = (struct Node**)(independent_calloc(n, sizeof(struct Node), 0);
863 if (pool == 0) die();
864 // organize into a linked list...
865 struct Node* first = pool[0];
866 for (i = 0; i < n-1; ++i)
867 pool[i]->next = pool[i+1];
868 free(pool); // Can now free the array (or not, if it is needed later)
872 void** dlindependent_calloc(size_t, size_t, void**);
875 independent_comalloc(size_t n_elements, size_t sizes[], void* chunks[]);
877 independent_comalloc allocates, all at once, a set of n_elements
878 chunks with sizes indicated in the "sizes" array. It returns
879 an array of pointers to these elements, each of which can be
880 independently freed, realloc'ed etc. The elements are guaranteed to
881 be adjacently allocated (this is not guaranteed to occur with
882 multiple callocs or mallocs), which may also improve cache locality
883 in some applications.
885 The "chunks" argument is optional (i.e., may be null). If it is null
886 the returned array is itself dynamically allocated and should also
887 be freed when it is no longer needed. Otherwise, the chunks array
888 must be of at least n_elements in length. It is filled in with the
889 pointers to the chunks.
891 In either case, independent_comalloc returns this pointer array, or
892 null if the allocation failed. If n_elements is zero and chunks is
893 null, it returns a chunk representing an array with zero elements
894 (which should be freed if not wanted).
896 Each element must be individually freed when it is no longer
897 needed. If you'd like to instead be able to free all at once, you
898 should instead use a single regular malloc, and assign pointers at
899 particular offsets in the aggregate space. (In this case though, you
900 cannot independently free elements.)
902 independent_comallac differs from independent_calloc in that each
903 element may have a different size, and also that it does not
904 automatically clear elements.
906 independent_comalloc can be used to speed up allocation in cases
907 where several structs or objects must always be allocated at the
908 same time. For example:
913 void send_message(char* msg) {
914 int msglen = strlen(msg);
915 size_t sizes[3] = { sizeof(struct Head), msglen, sizeof(struct Foot) };
917 if (independent_comalloc(3, sizes, chunks) == 0)
919 struct Head* head = (struct Head*)(chunks[0]);
920 char* body = (char*)(chunks[1]);
921 struct Foot* foot = (struct Foot*)(chunks[2]);
925 In general though, independent_comalloc is worth using only for
926 larger values of n_elements. For small values, you probably won't
927 detect enough difference from series of malloc calls to bother.
929 Overuse of independent_comalloc can increase overall memory usage,
930 since it cannot reuse existing noncontiguous small chunks that
931 might be available for some of the elements.
933 void** dlindependent_comalloc(size_t, size_t*, void**);
938 Equivalent to valloc(minimum-page-that-holds(n)), that is,
939 round up n to nearest pagesize.
941 void* dlpvalloc(size_t);
944 malloc_trim(size_t pad);
946 If possible, gives memory back to the system (via negative arguments
947 to sbrk) if there is unused memory at the `high' end of the malloc
948 pool or in unused MMAP segments. You can call this after freeing
949 large blocks of memory to potentially reduce the system-level memory
950 requirements of a program. However, it cannot guarantee to reduce
951 memory. Under some allocation patterns, some large free blocks of
952 memory will be locked between two used chunks, so they cannot be
953 given back to the system.
955 The `pad' argument to malloc_trim represents the amount of free
956 trailing space to leave untrimmed. If this argument is zero, only
957 the minimum amount of memory to maintain internal data structures
958 will be left. Non-zero arguments can be supplied to maintain enough
959 trailing space to service future expected allocations without having
960 to re-obtain memory from the system.
962 Malloc_trim returns 1 if it actually released any memory, else 0.
964 int dlmalloc_trim(size_t);
967 malloc_usable_size(void* p);
969 Returns the number of bytes you can actually use in
970 an allocated chunk, which may be more than you requested (although
971 often not) due to alignment and minimum size constraints.
972 You can use this many bytes without worrying about
973 overwriting other allocated objects. This is not a particularly great
974 programming practice. malloc_usable_size can be more useful in
975 debugging and assertions, for example:
978 assert(malloc_usable_size(p) >= 256);
980 size_t dlmalloc_usable_size(void*);
984 Prints on stderr the amount of space obtained from the system (both
985 via sbrk and mmap), the maximum amount (which may be more than
986 current if malloc_trim and/or munmap got called), and the current
987 number of bytes allocated via malloc (or realloc, etc) but not yet
988 freed. Note that this is the number of bytes allocated, not the
989 number requested. It will be larger than the number requested
990 because of alignment and bookkeeping overhead. Because it includes
991 alignment wastage as being in use, this figure may be greater than
992 zero even when no user-level chunks are allocated.
994 The reported current and maximum system memory can be inaccurate if
995 a program makes other calls to system memory allocation functions
996 (normally sbrk) outside of malloc.
998 malloc_stats prints only the most commonly interesting statistics.
999 More information can be obtained by calling mallinfo.
1001 void dlmalloc_stats(void);
1003 #endif /* ONLY_MSPACES */
1008 mspace is an opaque type representing an independent
1009 region of space that supports mspace_malloc, etc.
1011 typedef void* mspace
;
1014 create_mspace creates and returns a new independent space with the
1015 given initial capacity, or, if 0, the default granularity size. It
1016 returns null if there is no system memory available to create the
1017 space. If argument locked is non-zero, the space uses a separate
1018 lock to control access. The capacity of the space will grow
1019 dynamically as needed to service mspace_malloc requests. You can
1020 control the sizes of incremental increases of this space by
1021 compiling with a different DEFAULT_GRANULARITY or dynamically
1022 setting with mallopt(M_GRANULARITY, value).
1024 mspace
create_mspace(size_t capacity
, int locked
);
1027 destroy_mspace destroys the given space, and attempts to return all
1028 of its memory back to the system, returning the total number of
1029 bytes freed. After destruction, the results of access to all memory
1030 used by the space become undefined.
1032 size_t destroy_mspace(mspace msp
);
1035 create_mspace_with_base uses the memory supplied as the initial base
1036 of a new mspace. Part (less than 128*sizeof(size_t) bytes) of this
1037 space is used for bookkeeping, so the capacity must be at least this
1038 large. (Otherwise 0 is returned.) When this initial space is
1039 exhausted, additional memory will be obtained from the system.
1040 Destroying this space will deallocate all additionally allocated
1041 space (if possible) but not the initial base.
1043 mspace
create_mspace_with_base(void* base
, size_t capacity
, int locked
);
1046 mspace_malloc behaves as malloc, but operates within
1049 void* mspace_malloc(mspace msp
, size_t bytes
);
1052 mspace_free behaves as free, but operates within
1055 If compiled with FOOTERS==1, mspace_free is not actually needed.
1056 free may be called instead of mspace_free because freed chunks from
1057 any space are handled by their originating spaces.
1059 void mspace_free(mspace msp
, void* mem
);
1062 mspace_realloc behaves as realloc, but operates within
1065 If compiled with FOOTERS==1, mspace_realloc is not actually
1066 needed. realloc may be called instead of mspace_realloc because
1067 realloced chunks from any space are handled by their originating
1070 void* mspace_realloc(mspace msp
, void* mem
, size_t newsize
);
1073 mspace_calloc behaves as calloc, but operates within
1076 void* mspace_calloc(mspace msp
, size_t n_elements
, size_t elem_size
);
1079 mspace_memalign behaves as memalign, but operates within
1082 void* mspace_memalign(mspace msp
, size_t alignment
, size_t bytes
);
1085 mspace_independent_calloc behaves as independent_calloc, but
1086 operates within the given space.
1088 void** mspace_independent_calloc(mspace msp
, size_t n_elements
,
1089 size_t elem_size
, void* chunks
[]);
1092 mspace_independent_comalloc behaves as independent_comalloc, but
1093 operates within the given space.
1095 void** mspace_independent_comalloc(mspace msp
, size_t n_elements
,
1096 size_t sizes
[], void* chunks
[]);
1099 mspace_footprint() returns the number of bytes obtained from the
1100 system for this space.
1102 size_t mspace_footprint(mspace msp
);
1105 mspace_max_footprint() returns the peak number of bytes obtained from the
1106 system for this space.
1108 size_t mspace_max_footprint(mspace msp
);
1113 mspace_mallinfo behaves as mallinfo, but reports properties of
1116 struct mallinfo
mspace_mallinfo(mspace msp
);
1117 #endif /* NO_MALLINFO */
1120 mspace_malloc_stats behaves as malloc_stats, but reports
1121 properties of the given space.
1123 void mspace_malloc_stats(mspace msp
);
1126 mspace_trim behaves as malloc_trim, but
1127 operates within the given space.
1129 int mspace_trim(mspace msp
, size_t pad
);
1132 An alias for mallopt.
1134 int mspace_mallopt(int, int);
1136 #endif /* MSPACES */
1139 }; /* end of extern "C" */
1140 #endif /* __cplusplus */
1143 ========================================================================
1144 To make a fully customizable malloc.h header file, cut everything
1145 above this line, put into file malloc.h, edit to suit, and #include it
1146 on the next line, as well as in programs that use this malloc.
1147 ========================================================================
1150 /* #include "malloc.h" */
1152 /*------------------------------ internal #includes ---------------------- */
1155 #pragma warning( disable : 4146 ) /* no "unsigned" warnings */
1156 #endif /* _MSC_VER */
1158 #include <stdio.h> /* for printing in malloc_stats */
1160 #ifndef LACKS_ERRNO_H
1161 #include <errno.h> /* for MALLOC_FAILURE_ACTION */
1162 #endif /* LACKS_ERRNO_H */
1164 #include <time.h> /* for magic initialization */
1165 #endif /* FOOTERS */
1166 #ifndef LACKS_STDLIB_H
1167 #include <stdlib.h> /* for abort() */
1168 #endif /* LACKS_STDLIB_H */
1170 #if ABORT_ON_ASSERT_FAILURE
1171 #define assert(x) if(!(x)) ABORT
1172 #else /* ABORT_ON_ASSERT_FAILURE */
1174 #endif /* ABORT_ON_ASSERT_FAILURE */
1178 #ifndef LACKS_STRING_H
1179 #include <string.h> /* for memset etc */
1180 #endif /* LACKS_STRING_H */
1182 #ifndef LACKS_STRINGS_H
1183 #include <strings.h> /* for ffs */
1184 #endif /* LACKS_STRINGS_H */
1185 #endif /* USE_BUILTIN_FFS */
1187 #ifndef LACKS_SYS_MMAN_H
1188 #include <sys/mman.h> /* for mmap */
1189 #endif /* LACKS_SYS_MMAN_H */
1190 #ifndef LACKS_FCNTL_H
1192 #endif /* LACKS_FCNTL_H */
1193 #endif /* HAVE_MMAP */
1195 #ifndef LACKS_UNISTD_H
1196 #include <unistd.h> /* for sbrk */
1197 #else /* LACKS_UNISTD_H */
1198 #if !defined(__FreeBSD__) && !defined(__OpenBSD__) && !defined(__NetBSD__)
1199 extern void* sbrk(ptrdiff_t);
1200 #endif /* FreeBSD etc */
1201 #endif /* LACKS_UNISTD_H */
1202 #endif /* HAVE_MMAP */
1205 #ifndef malloc_getpagesize
1206 # ifdef _SC_PAGESIZE /* some SVR4 systems omit an underscore */
1207 # ifndef _SC_PAGE_SIZE
1208 # define _SC_PAGE_SIZE _SC_PAGESIZE
1211 # ifdef _SC_PAGE_SIZE
1212 # define malloc_getpagesize sysconf(_SC_PAGE_SIZE)
1214 # if defined(BSD) || defined(DGUX) || defined(HAVE_GETPAGESIZE)
1215 extern size_t getpagesize();
1216 # define malloc_getpagesize getpagesize()
1218 # ifdef WIN32 /* use supplied emulation of getpagesize */
1219 # define malloc_getpagesize getpagesize()
1221 # ifndef LACKS_SYS_PARAM_H
1222 # include <sys/param.h>
1224 # ifdef EXEC_PAGESIZE
1225 # define malloc_getpagesize EXEC_PAGESIZE
1229 # define malloc_getpagesize NBPG
1231 # define malloc_getpagesize (NBPG * CLSIZE)
1235 # define malloc_getpagesize NBPC
1238 # define malloc_getpagesize PAGESIZE
1239 # else /* just guess */
1240 # define malloc_getpagesize ((size_t)4096U)
1251 /* ------------------- size_t and alignment properties -------------------- */
1253 /* The byte and bit size of a size_t */
1254 #define SIZE_T_SIZE (sizeof(size_t))
1255 #define SIZE_T_BITSIZE (sizeof(size_t) << 3)
1257 /* Some constants coerced to size_t */
1258 /* Annoying but necessary to avoid errors on some platforms */
1259 #define SIZE_T_ZERO ((size_t)0)
1260 #define SIZE_T_ONE ((size_t)1)
1261 #define SIZE_T_TWO ((size_t)2)
1262 #define TWO_SIZE_T_SIZES (SIZE_T_SIZE<<1)
1263 #define FOUR_SIZE_T_SIZES (SIZE_T_SIZE<<2)
1264 #define SIX_SIZE_T_SIZES (FOUR_SIZE_T_SIZES+TWO_SIZE_T_SIZES)
1265 #define HALF_MAX_SIZE_T (MAX_SIZE_T / 2U)
1267 /* The bit mask value corresponding to MALLOC_ALIGNMENT */
1268 #define CHUNK_ALIGN_MASK (MALLOC_ALIGNMENT - SIZE_T_ONE)
1270 /* True if address a has acceptable alignment */
1271 #define is_aligned(A) (((size_t)((A)) & (CHUNK_ALIGN_MASK)) == 0)
1273 /* the number of bytes to offset an address to align it */
1274 #define align_offset(A)\
1275 ((((size_t)(A) & CHUNK_ALIGN_MASK) == 0)? 0 :\
1276 ((MALLOC_ALIGNMENT - ((size_t)(A) & CHUNK_ALIGN_MASK)) & CHUNK_ALIGN_MASK))
1278 /* -------------------------- MMAP preliminaries ------------------------- */
1281 If HAVE_MORECORE or HAVE_MMAP are false, we just define calls and
1282 checks to fail so compiler optimizer can delete code rather than
1283 using so many "#if"s.
1287 /* MORECORE and MMAP must return MFAIL on failure */
1288 #define MFAIL ((void*)(MAX_SIZE_T))
1289 #define CMFAIL ((char*)(MFAIL)) /* defined for convenience */
1292 #define IS_MMAPPED_BIT (SIZE_T_ZERO)
1293 #define USE_MMAP_BIT (SIZE_T_ZERO)
1294 #define CALL_MMAP(s) MFAIL
1295 #define CALL_MUNMAP(a, s) (-1)
1296 #define DIRECT_MMAP(s) MFAIL
1298 #else /* HAVE_MMAP */
1299 #define IS_MMAPPED_BIT (SIZE_T_ONE)
1300 #define USE_MMAP_BIT (SIZE_T_ONE)
1302 #if !defined(WIN32) && !defined (__OS2__)
1303 #define CALL_MUNMAP(a, s) munmap((a), (s))
1304 #define MMAP_PROT (PROT_READ|PROT_WRITE)
1305 #if !defined(MAP_ANONYMOUS) && defined(MAP_ANON)
1306 #define MAP_ANONYMOUS MAP_ANON
1307 #endif /* MAP_ANON */
1308 #ifdef MAP_ANONYMOUS
1309 #define MMAP_FLAGS (MAP_PRIVATE|MAP_ANONYMOUS)
1310 #define CALL_MMAP(s) mmap(0, (s), MMAP_PROT, MMAP_FLAGS, -1, 0)
1311 #else /* MAP_ANONYMOUS */
1313 Nearly all versions of mmap support MAP_ANONYMOUS, so the following
1314 is unlikely to be needed, but is supplied just in case.
1316 #define MMAP_FLAGS (MAP_PRIVATE)
1317 static int dev_zero_fd
= -1; /* Cached file descriptor for /dev/zero. */
1318 #define CALL_MMAP(s) ((dev_zero_fd < 0) ? \
1319 (dev_zero_fd = open("/dev/zero", O_RDWR), \
1320 mmap(0, (s), MMAP_PROT, MMAP_FLAGS, dev_zero_fd, 0)) : \
1321 mmap(0, (s), MMAP_PROT, MMAP_FLAGS, dev_zero_fd, 0))
1322 #endif /* MAP_ANONYMOUS */
1324 #define DIRECT_MMAP(s) CALL_MMAP(s)
1326 #elif defined(__OS2__)
1328 /* OS/2 MMAP via DosAllocMem */
1329 static void* os2mmap(size_t size
) {
1331 if (DosAllocMem(&ptr
, size
, OBJ_ANY
|PAG_COMMIT
|PAG_READ
|PAG_WRITE
) &&
1332 DosAllocMem(&ptr
, size
, PAG_COMMIT
|PAG_READ
|PAG_WRITE
))
1337 #define os2direct_mmap(n) os2mmap(n)
1339 /* This function supports releasing coalesed segments */
1340 static int os2munmap(void* ptr
, size_t size
) {
1342 ULONG ulSize
= size
;
1344 if (DosQueryMem(ptr
, &ulSize
, &ulFlags
) != 0)
1346 if ((ulFlags
& PAG_BASE
) == 0 ||(ulFlags
& PAG_COMMIT
) == 0 ||
1349 if (DosFreeMem(ptr
) != 0)
1351 ptr
= ( void * ) ( ( char * ) ptr
+ ulSize
);
1357 #define CALL_MMAP(s) os2mmap(s)
1358 #define CALL_MUNMAP(a, s) os2munmap((a), (s))
1359 #define DIRECT_MMAP(s) os2direct_mmap(s)
1363 /* Win32 MMAP via VirtualAlloc */
1364 static void* win32mmap(size_t size
) {
1365 void* ptr
= VirtualAlloc(0, size
, MEM_RESERVE
|MEM_COMMIT
, PAGE_EXECUTE_READWRITE
);
1366 return (ptr
!= 0)? ptr
: MFAIL
;
1369 /* For direct MMAP, use MEM_TOP_DOWN to minimize interference */
1370 static void* win32direct_mmap(size_t size
) {
1371 void* ptr
= VirtualAlloc(0, size
, MEM_RESERVE
|MEM_COMMIT
|MEM_TOP_DOWN
,
1372 PAGE_EXECUTE_READWRITE
);
1373 return (ptr
!= 0)? ptr
: MFAIL
;
1376 /* This function supports releasing coalesed segments */
1377 static int win32munmap(void* ptr
, size_t size
) {
1378 MEMORY_BASIC_INFORMATION minfo
;
1381 if (VirtualQuery(cptr
, &minfo
, sizeof(minfo
)) == 0)
1383 if (minfo
.BaseAddress
!= cptr
|| minfo
.AllocationBase
!= cptr
||
1384 minfo
.State
!= MEM_COMMIT
|| minfo
.RegionSize
> size
)
1386 if (VirtualFree(cptr
, 0, MEM_RELEASE
) == 0)
1388 cptr
+= minfo
.RegionSize
;
1389 size
-= minfo
.RegionSize
;
1394 #define CALL_MMAP(s) win32mmap(s)
1395 #define CALL_MUNMAP(a, s) win32munmap((a), (s))
1396 #define DIRECT_MMAP(s) win32direct_mmap(s)
1398 #endif /* HAVE_MMAP */
1400 #if HAVE_MMAP && HAVE_MREMAP
1401 #define CALL_MREMAP(addr, osz, nsz, mv) mremap((addr), (osz), (nsz), (mv))
1402 #else /* HAVE_MMAP && HAVE_MREMAP */
1403 #define CALL_MREMAP(addr, osz, nsz, mv) MFAIL
1404 #endif /* HAVE_MMAP && HAVE_MREMAP */
1407 #define CALL_MORECORE(S) MORECORE(S)
1408 #else /* HAVE_MORECORE */
1409 #define CALL_MORECORE(S) MFAIL
1410 #endif /* HAVE_MORECORE */
1412 /* mstate bit set if contiguous morecore disabled or failed */
1413 #define USE_NONCONTIGUOUS_BIT (4U)
1415 /* segment bit set in create_mspace_with_base */
1416 #define EXTERN_BIT (8U)
1419 /* --------------------------- Lock preliminaries ------------------------ */
1424 When locks are defined, there are up to two global locks:
1426 * If HAVE_MORECORE, morecore_mutex protects sequences of calls to
1427 MORECORE. In many cases sys_alloc requires two calls, that should
1428 not be interleaved with calls by other threads. This does not
1429 protect against direct calls to MORECORE by other threads not
1430 using this lock, so there is still code to cope the best we can on
1433 * magic_init_mutex ensures that mparams.magic and other
1434 unique mparams values are initialized only once.
1437 #if !defined(WIN32) && !defined(__OS2__)
1438 /* By default use posix locks */
1439 #include <pthread.h>
1440 #define MLOCK_T pthread_mutex_t
1441 #define INITIAL_LOCK(l) pthread_mutex_init(l, NULL)
1442 #define ACQUIRE_LOCK(l) pthread_mutex_lock(l)
1443 #define RELEASE_LOCK(l) pthread_mutex_unlock(l)
1446 static MLOCK_T morecore_mutex
= PTHREAD_MUTEX_INITIALIZER
;
1447 #endif /* HAVE_MORECORE */
1449 static MLOCK_T magic_init_mutex
= PTHREAD_MUTEX_INITIALIZER
;
1451 #elif defined(__OS2__)
1452 #define MLOCK_T HMTX
1453 #define INITIAL_LOCK(l) DosCreateMutexSem(0, l, 0, FALSE)
1454 #define ACQUIRE_LOCK(l) DosRequestMutexSem(*l, SEM_INDEFINITE_WAIT)
1455 #define RELEASE_LOCK(l) DosReleaseMutexSem(*l)
1457 static MLOCK_T morecore_mutex
;
1458 #endif /* HAVE_MORECORE */
1459 static MLOCK_T magic_init_mutex
;
1463 Because lock-protected regions have bounded times, and there
1464 are no recursive lock calls, we can use simple spinlocks.
1467 #define MLOCK_T long
1468 static int win32_acquire_lock (MLOCK_T
*sl
) {
1470 #ifdef InterlockedCompareExchangePointer
1471 if (!InterlockedCompareExchange(sl
, 1, 0))
1473 #else /* Use older void* version */
1474 if (!InterlockedCompareExchange((void**)sl
, (void*)1, (void*)0))
1476 #endif /* InterlockedCompareExchangePointer */
1481 static void win32_release_lock (MLOCK_T
*sl
) {
1482 InterlockedExchange (sl
, 0);
1485 #define INITIAL_LOCK(l) *(l)=0
1486 #define ACQUIRE_LOCK(l) win32_acquire_lock(l)
1487 #define RELEASE_LOCK(l) win32_release_lock(l)
1489 static MLOCK_T morecore_mutex
;
1490 #endif /* HAVE_MORECORE */
1491 static MLOCK_T magic_init_mutex
;
1494 #define USE_LOCK_BIT (2U)
1495 #else /* USE_LOCKS */
1496 #define USE_LOCK_BIT (0U)
1497 #define INITIAL_LOCK(l)
1498 #endif /* USE_LOCKS */
1500 #if USE_LOCKS && HAVE_MORECORE
1501 #define ACQUIRE_MORECORE_LOCK() ACQUIRE_LOCK(&morecore_mutex);
1502 #define RELEASE_MORECORE_LOCK() RELEASE_LOCK(&morecore_mutex);
1503 #else /* USE_LOCKS && HAVE_MORECORE */
1504 #define ACQUIRE_MORECORE_LOCK()
1505 #define RELEASE_MORECORE_LOCK()
1506 #endif /* USE_LOCKS && HAVE_MORECORE */
1509 #define ACQUIRE_MAGIC_INIT_LOCK() ACQUIRE_LOCK(&magic_init_mutex);
1510 #define RELEASE_MAGIC_INIT_LOCK() RELEASE_LOCK(&magic_init_mutex);
1511 #else /* USE_LOCKS */
1512 #define ACQUIRE_MAGIC_INIT_LOCK()
1513 #define RELEASE_MAGIC_INIT_LOCK()
1514 #endif /* USE_LOCKS */
1517 /* ----------------------- Chunk representations ------------------------ */
1520 (The following includes lightly edited explanations by Colin Plumb.)
1522 The malloc_chunk declaration below is misleading (but accurate and
1523 necessary). It declares a "view" into memory allowing access to
1524 necessary fields at known offsets from a given base.
1526 Chunks of memory are maintained using a `boundary tag' method as
1527 originally described by Knuth. (See the paper by Paul Wilson
1528 ftp://ftp.cs.utexas.edu/pub/garbage/allocsrv.ps for a survey of such
1529 techniques.) Sizes of free chunks are stored both in the front of
1530 each chunk and at the end. This makes consolidating fragmented
1531 chunks into bigger chunks fast. The head fields also hold bits
1532 representing whether chunks are free or in use.
1534 Here are some pictures to make it clearer. They are "exploded" to
1535 show that the state of a chunk can be thought of as extending from
1536 the high 31 bits of the head field of its header through the
1537 prev_foot and PINUSE_BIT bit of the following chunk header.
1539 A chunk that's in use looks like:
1541 chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1542 | Size of previous chunk (if P = 1) |
1543 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1544 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |P|
1545 | Size of this chunk 1| +-+
1546 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1552 +- size - sizeof(size_t) available payload bytes -+
1556 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1557 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |1|
1558 | Size of next chunk (may or may not be in use) | +-+
1559 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1561 And if it's free, it looks like this:
1564 | User payload (must be in use, or we would have merged!) |
1565 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1566 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |P|
1567 | Size of this chunk 0| +-+
1568 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1570 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1572 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1574 +- size - sizeof(struct chunk) unused bytes -+
1576 chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1577 | Size of this chunk |
1578 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1579 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |0|
1580 | Size of next chunk (must be in use, or we would have merged)| +-+
1581 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1585 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1588 Note that since we always merge adjacent free chunks, the chunks
1589 adjacent to a free chunk must be in use.
1591 Given a pointer to a chunk (which can be derived trivially from the
1592 payload pointer) we can, in O(1) time, find out whether the adjacent
1593 chunks are free, and if so, unlink them from the lists that they
1594 are on and merge them with the current chunk.
1596 Chunks always begin on even word boundaries, so the mem portion
1597 (which is returned to the user) is also on an even word boundary, and
1598 thus at least double-word aligned.
1600 The P (PINUSE_BIT) bit, stored in the unused low-order bit of the
1601 chunk size (which is always a multiple of two words), is an in-use
1602 bit for the *previous* chunk. If that bit is *clear*, then the
1603 word before the current chunk size contains the previous chunk
1604 size, and can be used to find the front of the previous chunk.
1605 The very first chunk allocated always has this bit set, preventing
1606 access to non-existent (or non-owned) memory. If pinuse is set for
1607 any given chunk, then you CANNOT determine the size of the
1608 previous chunk, and might even get a memory addressing fault when
1611 The C (CINUSE_BIT) bit, stored in the unused second-lowest bit of
1612 the chunk size redundantly records whether the current chunk is
1613 inuse. This redundancy enables usage checks within free and realloc,
1614 and reduces indirection when freeing and consolidating chunks.
1616 Each freshly allocated chunk must have both cinuse and pinuse set.
1617 That is, each allocated chunk borders either a previously allocated
1618 and still in-use chunk, or the base of its memory arena. This is
1619 ensured by making all allocations from the the `lowest' part of any
1620 found chunk. Further, no free chunk physically borders another one,
1621 so each free chunk is known to be preceded and followed by either
1622 inuse chunks or the ends of memory.
1624 Note that the `foot' of the current chunk is actually represented
1625 as the prev_foot of the NEXT chunk. This makes it easier to
1626 deal with alignments etc but can be very confusing when trying
1627 to extend or adapt this code.
1629 The exceptions to all this are
1631 1. The special chunk `top' is the top-most available chunk (i.e.,
1632 the one bordering the end of available memory). It is treated
1633 specially. Top is never included in any bin, is used only if
1634 no other chunk is available, and is released back to the
1635 system if it is very large (see M_TRIM_THRESHOLD). In effect,
1636 the top chunk is treated as larger (and thus less well
1637 fitting) than any other available chunk. The top chunk
1638 doesn't update its trailing size field since there is no next
1639 contiguous chunk that would have to index off it. However,
1640 space is still allocated for it (TOP_FOOT_SIZE) to enable
1641 separation or merging when space is extended.
1643 3. Chunks allocated via mmap, which have the lowest-order bit
1644 (IS_MMAPPED_BIT) set in their prev_foot fields, and do not set
1645 PINUSE_BIT in their head fields. Because they are allocated
1646 one-by-one, each must carry its own prev_foot field, which is
1647 also used to hold the offset this chunk has within its mmapped
1648 region, which is needed to preserve alignment. Each mmapped
1649 chunk is trailed by the first two fields of a fake next-chunk
1650 for sake of usage checks.
1654 struct malloc_chunk
{
1655 size_t prev_foot
; /* Size of previous chunk (if free). */
1656 size_t head
; /* Size and inuse bits. */
1657 struct malloc_chunk
* fd
; /* double links -- used only if free. */
1658 struct malloc_chunk
* bk
;
1661 typedef struct malloc_chunk mchunk
;
1662 typedef struct malloc_chunk
* mchunkptr
;
1663 typedef struct malloc_chunk
* sbinptr
; /* The type of bins of chunks */
1664 typedef size_t bindex_t
; /* Described below */
1665 typedef unsigned int binmap_t
; /* Described below */
1666 typedef unsigned int flag_t
; /* The type of various bit flag sets */
1668 /* ------------------- Chunks sizes and alignments ----------------------- */
1670 #define MCHUNK_SIZE (sizeof(mchunk))
1673 #define CHUNK_OVERHEAD (TWO_SIZE_T_SIZES)
1675 #define CHUNK_OVERHEAD (SIZE_T_SIZE)
1676 #endif /* FOOTERS */
1678 /* MMapped chunks need a second word of overhead ... */
1679 #define MMAP_CHUNK_OVERHEAD (TWO_SIZE_T_SIZES)
1680 /* ... and additional padding for fake next-chunk at foot */
1681 #define MMAP_FOOT_PAD (FOUR_SIZE_T_SIZES)
1683 /* The smallest size we can malloc is an aligned minimal chunk */
1684 #define MIN_CHUNK_SIZE\
1685 ((MCHUNK_SIZE + CHUNK_ALIGN_MASK) & ~CHUNK_ALIGN_MASK)
1687 /* conversion from malloc headers to user pointers, and back */
1688 #define chunk2mem(p) ((void*)((char*)(p) + TWO_SIZE_T_SIZES))
1689 #define mem2chunk(mem) ((mchunkptr)((char*)(mem) - TWO_SIZE_T_SIZES))
1690 /* chunk associated with aligned address A */
1691 #define align_as_chunk(A) (mchunkptr)((A) + align_offset(chunk2mem(A)))
1693 /* Bounds on request (not chunk) sizes. */
1694 #define MAX_REQUEST ((-MIN_CHUNK_SIZE) << 2)
1695 #define MIN_REQUEST (MIN_CHUNK_SIZE - CHUNK_OVERHEAD - SIZE_T_ONE)
1697 /* pad request bytes into a usable size */
1698 #define pad_request(req) \
1699 (((req) + CHUNK_OVERHEAD + CHUNK_ALIGN_MASK) & ~CHUNK_ALIGN_MASK)
1701 /* pad request, checking for minimum (but not maximum) */
1702 #define request2size(req) \
1703 (((req) < MIN_REQUEST)? MIN_CHUNK_SIZE : pad_request(req))
1706 /* ------------------ Operations on head and foot fields ----------------- */
1709 The head field of a chunk is or'ed with PINUSE_BIT when previous
1710 adjacent chunk in use, and or'ed with CINUSE_BIT if this chunk is in
1711 use. If the chunk was obtained with mmap, the prev_foot field has
1712 IS_MMAPPED_BIT set, otherwise holding the offset of the base of the
1713 mmapped region to the base of the chunk.
1716 #define PINUSE_BIT (SIZE_T_ONE)
1717 #define CINUSE_BIT (SIZE_T_TWO)
1718 #define INUSE_BITS (PINUSE_BIT|CINUSE_BIT)
1720 /* Head value for fenceposts */
1721 #define FENCEPOST_HEAD (INUSE_BITS|SIZE_T_SIZE)
1723 /* extraction of fields from head words */
1724 #define cinuse(p) ((p)->head & CINUSE_BIT)
1725 #define pinuse(p) ((p)->head & PINUSE_BIT)
1726 #define chunksize(p) ((p)->head & ~(INUSE_BITS))
1728 #define clear_pinuse(p) ((p)->head &= ~PINUSE_BIT)
1729 #define clear_cinuse(p) ((p)->head &= ~CINUSE_BIT)
1731 /* Treat space at ptr +/- offset as a chunk */
1732 #define chunk_plus_offset(p, s) ((mchunkptr)(((char*)(p)) + (s)))
1733 #define chunk_minus_offset(p, s) ((mchunkptr)(((char*)(p)) - (s)))
1735 /* Ptr to next or previous physical malloc_chunk. */
1736 #define next_chunk(p) ((mchunkptr)( ((char*)(p)) + ((p)->head & ~INUSE_BITS)))
1737 #define prev_chunk(p) ((mchunkptr)( ((char*)(p)) - ((p)->prev_foot) ))
1739 /* extract next chunk's pinuse bit */
1740 #define next_pinuse(p) ((next_chunk(p)->head) & PINUSE_BIT)
1742 /* Get/set size at footer */
1743 #define get_foot(p, s) (((mchunkptr)((char*)(p) + (s)))->prev_foot)
1744 #define set_foot(p, s) (((mchunkptr)((char*)(p) + (s)))->prev_foot = (s))
1746 /* Set size, pinuse bit, and foot */
1747 #define set_size_and_pinuse_of_free_chunk(p, s)\
1748 ((p)->head = (s|PINUSE_BIT), set_foot(p, s))
1750 /* Set size, pinuse bit, foot, and clear next pinuse */
1751 #define set_free_with_pinuse(p, s, n)\
1752 (clear_pinuse(n), set_size_and_pinuse_of_free_chunk(p, s))
1754 #define is_mmapped(p)\
1755 (!((p)->head & PINUSE_BIT) && ((p)->prev_foot & IS_MMAPPED_BIT))
1757 /* Get the internal overhead associated with chunk p */
1758 #define overhead_for(p)\
1759 (is_mmapped(p)? MMAP_CHUNK_OVERHEAD : CHUNK_OVERHEAD)
1761 /* Return true if malloced space is not necessarily cleared */
1763 #define calloc_must_clear(p) (!is_mmapped(p))
1764 #else /* MMAP_CLEARS */
1765 #define calloc_must_clear(p) (1)
1766 #endif /* MMAP_CLEARS */
1768 /* ---------------------- Overlaid data structures ----------------------- */
1771 When chunks are not in use, they are treated as nodes of either
1774 "Small" chunks are stored in circular doubly-linked lists, and look
1777 chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1778 | Size of previous chunk |
1779 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1780 `head:' | Size of chunk, in bytes |P|
1781 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1782 | Forward pointer to next chunk in list |
1783 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1784 | Back pointer to previous chunk in list |
1785 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1786 | Unused space (may be 0 bytes long) .
1789 nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1790 `foot:' | Size of chunk, in bytes |
1791 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1793 Larger chunks are kept in a form of bitwise digital trees (aka
1794 tries) keyed on chunksizes. Because malloc_tree_chunks are only for
1795 free chunks greater than 256 bytes, their size doesn't impose any
1796 constraints on user chunk sizes. Each node looks like:
1798 chunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1799 | Size of previous chunk |
1800 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1801 `head:' | Size of chunk, in bytes |P|
1802 mem-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1803 | Forward pointer to next chunk of same size |
1804 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1805 | Back pointer to previous chunk of same size |
1806 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1807 | Pointer to left child (child[0]) |
1808 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1809 | Pointer to right child (child[1]) |
1810 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1811 | Pointer to parent |
1812 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1813 | bin index of this chunk |
1814 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1817 nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1818 `foot:' | Size of chunk, in bytes |
1819 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
1821 Each tree holding treenodes is a tree of unique chunk sizes. Chunks
1822 of the same size are arranged in a circularly-linked list, with only
1823 the oldest chunk (the next to be used, in our FIFO ordering)
1824 actually in the tree. (Tree members are distinguished by a non-null
1825 parent pointer.) If a chunk with the same size an an existing node
1826 is inserted, it is linked off the existing node using pointers that
1827 work in the same way as fd/bk pointers of small chunks.
1829 Each tree contains a power of 2 sized range of chunk sizes (the
1830 smallest is 0x100 <= x < 0x180), which is is divided in half at each
1831 tree level, with the chunks in the smaller half of the range (0x100
1832 <= x < 0x140 for the top nose) in the left subtree and the larger
1833 half (0x140 <= x < 0x180) in the right subtree. This is, of course,
1834 done by inspecting individual bits.
1836 Using these rules, each node's left subtree contains all smaller
1837 sizes than its right subtree. However, the node at the root of each
1838 subtree has no particular ordering relationship to either. (The
1839 dividing line between the subtree sizes is based on trie relation.)
1840 If we remove the last chunk of a given size from the interior of the
1841 tree, we need to replace it with a leaf node. The tree ordering
1842 rules permit a node to be replaced by any leaf below it.
1844 The smallest chunk in a tree (a common operation in a best-fit
1845 allocator) can be found by walking a path to the leftmost leaf in
1846 the tree. Unlike a usual binary tree, where we follow left child
1847 pointers until we reach a null, here we follow the right child
1848 pointer any time the left one is null, until we reach a leaf with
1849 both child pointers null. The smallest chunk in the tree will be
1850 somewhere along that path.
1852 The worst case number of steps to add, find, or remove a node is
1853 bounded by the number of bits differentiating chunks within
1854 bins. Under current bin calculations, this ranges from 6 up to 21
1855 (for 32 bit sizes) or up to 53 (for 64 bit sizes). The typical case
1856 is of course much better.
1859 struct malloc_tree_chunk
{
1860 /* The first four fields must be compatible with malloc_chunk */
1863 struct malloc_tree_chunk
* fd
;
1864 struct malloc_tree_chunk
* bk
;
1866 struct malloc_tree_chunk
* child
[2];
1867 struct malloc_tree_chunk
* parent
;
1871 typedef struct malloc_tree_chunk tchunk
;
1872 typedef struct malloc_tree_chunk
* tchunkptr
;
1873 typedef struct malloc_tree_chunk
* tbinptr
; /* The type of bins of trees */
1875 /* A little helper macro for trees */
1876 #define leftmost_child(t) ((t)->child[0] != 0? (t)->child[0] : (t)->child[1])
1878 /* ----------------------------- Segments -------------------------------- */
1881 Each malloc space may include non-contiguous segments, held in a
1882 list headed by an embedded malloc_segment record representing the
1883 top-most space. Segments also include flags holding properties of
1884 the space. Large chunks that are directly allocated by mmap are not
1885 included in this list. They are instead independently created and
1886 destroyed without otherwise keeping track of them.
1888 Segment management mainly comes into play for spaces allocated by
1889 MMAP. Any call to MMAP might or might not return memory that is
1890 adjacent to an existing segment. MORECORE normally contiguously
1891 extends the current space, so this space is almost always adjacent,
1892 which is simpler and faster to deal with. (This is why MORECORE is
1893 used preferentially to MMAP when both are available -- see
1894 sys_alloc.) When allocating using MMAP, we don't use any of the
1895 hinting mechanisms (inconsistently) supported in various
1896 implementations of unix mmap, or distinguish reserving from
1897 committing memory. Instead, we just ask for space, and exploit
1898 contiguity when we get it. It is probably possible to do
1899 better than this on some systems, but no general scheme seems
1900 to be significantly better.
1902 Management entails a simpler variant of the consolidation scheme
1903 used for chunks to reduce fragmentation -- new adjacent memory is
1904 normally prepended or appended to an existing segment. However,
1905 there are limitations compared to chunk consolidation that mostly
1906 reflect the fact that segment processing is relatively infrequent
1907 (occurring only when getting memory from system) and that we
1908 don't expect to have huge numbers of segments:
1910 * Segments are not indexed, so traversal requires linear scans. (It
1911 would be possible to index these, but is not worth the extra
1912 overhead and complexity for most programs on most platforms.)
1913 * New segments are only appended to old ones when holding top-most
1914 memory; if they cannot be prepended to others, they are held in
1917 Except for the top-most segment of an mstate, each segment record
1918 is kept at the tail of its segment. Segments are added by pushing
1919 segment records onto the list headed by &mstate.seg for the
1922 Segment flags control allocation/merge/deallocation policies:
1923 * If EXTERN_BIT set, then we did not allocate this segment,
1924 and so should not try to deallocate or merge with others.
1925 (This currently holds only for the initial segment passed
1926 into create_mspace_with_base.)
1927 * If IS_MMAPPED_BIT set, the segment may be merged with
1928 other surrounding mmapped segments and trimmed/de-allocated
1930 * If neither bit is set, then the segment was obtained using
1931 MORECORE so can be merged with surrounding MORECORE'd segments
1932 and deallocated/trimmed using MORECORE with negative arguments.
1935 struct malloc_segment
{
1936 char* base
; /* base address */
1937 size_t size
; /* allocated size */
1938 struct malloc_segment
* next
; /* ptr to next segment */
1939 #if FFI_MMAP_EXEC_WRIT
1940 /* The mmap magic is supposed to store the address of the executable
1941 segment at the very end of the requested block. */
1943 # define mmap_exec_offset(b,s) (*(ptrdiff_t*)((b)+(s)-sizeof(ptrdiff_t)))
1945 /* We can only merge segments if their corresponding executable
1946 segments are at identical offsets. */
1947 # define check_segment_merge(S,b,s) \
1948 (mmap_exec_offset((b),(s)) == (S)->exec_offset)
1950 # define add_segment_exec_offset(p,S) ((char*)(p) + (S)->exec_offset)
1951 # define sub_segment_exec_offset(p,S) ((char*)(p) - (S)->exec_offset)
1953 /* The removal of sflags only works with HAVE_MORECORE == 0. */
1955 # define get_segment_flags(S) (IS_MMAPPED_BIT)
1956 # define set_segment_flags(S,v) \
1957 (((v) != IS_MMAPPED_BIT) ? (ABORT, (v)) : \
1958 (((S)->exec_offset = \
1959 mmap_exec_offset((S)->base, (S)->size)), \
1960 (mmap_exec_offset((S)->base + (S)->exec_offset, (S)->size) != \
1961 (S)->exec_offset) ? (ABORT, (v)) : \
1962 (mmap_exec_offset((S)->base, (S)->size) = 0), (v)))
1964 /* We use an offset here, instead of a pointer, because then, when
1965 base changes, we don't have to modify this. On architectures
1966 with segmented addresses, this might not work. */
1967 ptrdiff_t exec_offset
;
1970 # define get_segment_flags(S) ((S)->sflags)
1971 # define set_segment_flags(S,v) ((S)->sflags = (v))
1972 # define check_segment_merge(S,b,s) (1)
1974 flag_t sflags
; /* mmap and extern flag */
1978 #define is_mmapped_segment(S) (get_segment_flags(S) & IS_MMAPPED_BIT)
1979 #define is_extern_segment(S) (get_segment_flags(S) & EXTERN_BIT)
1981 typedef struct malloc_segment msegment
;
1982 typedef struct malloc_segment
* msegmentptr
;
1984 /* ---------------------------- malloc_state ----------------------------- */
1987 A malloc_state holds all of the bookkeeping for a space.
1988 The main fields are:
1991 The topmost chunk of the currently active segment. Its size is
1992 cached in topsize. The actual size of topmost space is
1993 topsize+TOP_FOOT_SIZE, which includes space reserved for adding
1994 fenceposts and segment records if necessary when getting more
1995 space from the system. The size at which to autotrim top is
1996 cached from mparams in trim_check, except that it is disabled if
1999 Designated victim (dv)
2000 This is the preferred chunk for servicing small requests that
2001 don't have exact fits. It is normally the chunk split off most
2002 recently to service another small request. Its size is cached in
2003 dvsize. The link fields of this chunk are not maintained since it
2004 is not kept in a bin.
2007 An array of bin headers for free chunks. These bins hold chunks
2008 with sizes less than MIN_LARGE_SIZE bytes. Each bin contains
2009 chunks of all the same size, spaced 8 bytes apart. To simplify
2010 use in double-linked lists, each bin header acts as a malloc_chunk
2011 pointing to the real first node, if it exists (else pointing to
2012 itself). This avoids special-casing for headers. But to avoid
2013 waste, we allocate only the fd/bk pointers of bins, and then use
2014 repositioning tricks to treat these as the fields of a chunk.
2017 Treebins are pointers to the roots of trees holding a range of
2018 sizes. There are 2 equally spaced treebins for each power of two
2019 from TREE_SHIFT to TREE_SHIFT+16. The last bin holds anything
2023 There is one bit map for small bins ("smallmap") and one for
2024 treebins ("treemap). Each bin sets its bit when non-empty, and
2025 clears the bit when empty. Bit operations are then used to avoid
2026 bin-by-bin searching -- nearly all "search" is done without ever
2027 looking at bins that won't be selected. The bit maps
2028 conservatively use 32 bits per map word, even if on 64bit system.
2029 For a good description of some of the bit-based techniques used
2030 here, see Henry S. Warren Jr's book "Hacker's Delight" (and
2031 supplement at http://hackersdelight.org/). Many of these are
2032 intended to reduce the branchiness of paths through malloc etc, as
2033 well as to reduce the number of memory locations read or written.
2036 A list of segments headed by an embedded malloc_segment record
2037 representing the initial space.
2039 Address check support
2040 The least_addr field is the least address ever obtained from
2041 MORECORE or MMAP. Attempted frees and reallocs of any address less
2042 than this are trapped (unless INSECURE is defined).
2045 A cross-check field that should always hold same value as mparams.magic.
2048 Bits recording whether to use MMAP, locks, or contiguous MORECORE
2051 Each space keeps track of current and maximum system memory
2052 obtained via MORECORE or MMAP.
2055 If USE_LOCKS is defined, the "mutex" lock is acquired and released
2056 around every public call using this mspace.
2059 /* Bin types, widths and sizes */
2060 #define NSMALLBINS (32U)
2061 #define NTREEBINS (32U)
2062 #define SMALLBIN_SHIFT (3U)
2063 #define SMALLBIN_WIDTH (SIZE_T_ONE << SMALLBIN_SHIFT)
2064 #define TREEBIN_SHIFT (8U)
2065 #define MIN_LARGE_SIZE (SIZE_T_ONE << TREEBIN_SHIFT)
2066 #define MAX_SMALL_SIZE (MIN_LARGE_SIZE - SIZE_T_ONE)
2067 #define MAX_SMALL_REQUEST (MAX_SMALL_SIZE - CHUNK_ALIGN_MASK - CHUNK_OVERHEAD)
2069 struct malloc_state
{
2079 mchunkptr smallbins
[(NSMALLBINS
+1)*2];
2080 tbinptr treebins
[NTREEBINS
];
2082 size_t max_footprint
;
2085 MLOCK_T mutex
; /* locate lock among fields that rarely change */
2086 #endif /* USE_LOCKS */
2090 typedef struct malloc_state
* mstate
;
2092 /* ------------- Global malloc_state and malloc_params ------------------- */
2095 malloc_params holds global properties, including those that can be
2096 dynamically set using mallopt. There is a single instance, mparams,
2097 initialized in init_mparams.
2100 struct malloc_params
{
2104 size_t mmap_threshold
;
2105 size_t trim_threshold
;
2106 flag_t default_mflags
;
2109 static struct malloc_params mparams
;
2111 /* The global malloc_state used for all non-"mspace" calls */
2112 static struct malloc_state _gm_
;
2114 #define is_global(M) ((M) == &_gm_)
2115 #define is_initialized(M) ((M)->top != 0)
2117 /* -------------------------- system alloc setup ------------------------- */
2119 /* Operations on mflags */
2121 #define use_lock(M) ((M)->mflags & USE_LOCK_BIT)
2122 #define enable_lock(M) ((M)->mflags |= USE_LOCK_BIT)
2123 #define disable_lock(M) ((M)->mflags &= ~USE_LOCK_BIT)
2125 #define use_mmap(M) ((M)->mflags & USE_MMAP_BIT)
2126 #define enable_mmap(M) ((M)->mflags |= USE_MMAP_BIT)
2127 #define disable_mmap(M) ((M)->mflags &= ~USE_MMAP_BIT)
2129 #define use_noncontiguous(M) ((M)->mflags & USE_NONCONTIGUOUS_BIT)
2130 #define disable_contiguous(M) ((M)->mflags |= USE_NONCONTIGUOUS_BIT)
2132 #define set_lock(M,L)\
2133 ((M)->mflags = (L)?\
2134 ((M)->mflags | USE_LOCK_BIT) :\
2135 ((M)->mflags & ~USE_LOCK_BIT))
2137 /* page-align a size */
2138 #define page_align(S)\
2139 (((S) + (mparams.page_size)) & ~(mparams.page_size - SIZE_T_ONE))
2141 /* granularity-align a size */
2142 #define granularity_align(S)\
2143 (((S) + (mparams.granularity)) & ~(mparams.granularity - SIZE_T_ONE))
2145 #define is_page_aligned(S)\
2146 (((size_t)(S) & (mparams.page_size - SIZE_T_ONE)) == 0)
2147 #define is_granularity_aligned(S)\
2148 (((size_t)(S) & (mparams.granularity - SIZE_T_ONE)) == 0)
2150 /* True if segment S holds address A */
2151 #define segment_holds(S, A)\
2152 ((char*)(A) >= S->base && (char*)(A) < S->base + S->size)
2154 /* Return segment holding given address */
2155 static msegmentptr
segment_holding(mstate m
, char* addr
) {
2156 msegmentptr sp
= &m
->seg
;
2158 if (addr
>= sp
->base
&& addr
< sp
->base
+ sp
->size
)
2160 if ((sp
= sp
->next
) == 0)
2165 /* Return true if segment contains a segment link */
2166 static int has_segment_link(mstate m
, msegmentptr ss
) {
2167 msegmentptr sp
= &m
->seg
;
2169 if ((char*)sp
>= ss
->base
&& (char*)sp
< ss
->base
+ ss
->size
)
2171 if ((sp
= sp
->next
) == 0)
2176 #ifndef MORECORE_CANNOT_TRIM
2177 #define should_trim(M,s) ((s) > (M)->trim_check)
2178 #else /* MORECORE_CANNOT_TRIM */
2179 #define should_trim(M,s) (0)
2180 #endif /* MORECORE_CANNOT_TRIM */
2183 TOP_FOOT_SIZE is padding at the end of a segment, including space
2184 that may be needed to place segment records and fenceposts when new
2185 noncontiguous segments are added.
2187 #define TOP_FOOT_SIZE\
2188 (align_offset(chunk2mem(0))+pad_request(sizeof(struct malloc_segment))+MIN_CHUNK_SIZE)
2191 /* ------------------------------- Hooks -------------------------------- */
2194 PREACTION should be defined to return 0 on success, and nonzero on
2195 failure. If you are not using locking, you can redefine these to do
2201 /* Ensure locks are initialized */
2202 #define GLOBALLY_INITIALIZE() (mparams.page_size == 0 && init_mparams())
2204 #define PREACTION(M) ((GLOBALLY_INITIALIZE() || use_lock(M))? ACQUIRE_LOCK(&(M)->mutex) : 0)
2205 #define POSTACTION(M) { if (use_lock(M)) RELEASE_LOCK(&(M)->mutex); }
2206 #else /* USE_LOCKS */
2209 #define PREACTION(M) (0)
2210 #endif /* PREACTION */
2213 #define POSTACTION(M)
2214 #endif /* POSTACTION */
2216 #endif /* USE_LOCKS */
2219 CORRUPTION_ERROR_ACTION is triggered upon detected bad addresses.
2220 USAGE_ERROR_ACTION is triggered on detected bad frees and
2221 reallocs. The argument p is an address that might have triggered the
2222 fault. It is ignored by the two predefined actions, but might be
2223 useful in custom actions that try to help diagnose errors.
2226 #if PROCEED_ON_ERROR
2228 /* A count of the number of corruption errors causing resets */
2229 int malloc_corruption_error_count
;
2231 /* default corruption action */
2232 static void reset_on_error(mstate m
);
2234 #define CORRUPTION_ERROR_ACTION(m) reset_on_error(m)
2235 #define USAGE_ERROR_ACTION(m, p)
2237 #else /* PROCEED_ON_ERROR */
2239 #ifndef CORRUPTION_ERROR_ACTION
2240 #define CORRUPTION_ERROR_ACTION(m) ABORT
2241 #endif /* CORRUPTION_ERROR_ACTION */
2243 #ifndef USAGE_ERROR_ACTION
2244 #define USAGE_ERROR_ACTION(m,p) ABORT
2245 #endif /* USAGE_ERROR_ACTION */
2247 #endif /* PROCEED_ON_ERROR */
2249 /* -------------------------- Debugging setup ---------------------------- */
2253 #define check_free_chunk(M,P)
2254 #define check_inuse_chunk(M,P)
2255 #define check_malloced_chunk(M,P,N)
2256 #define check_mmapped_chunk(M,P)
2257 #define check_malloc_state(M)
2258 #define check_top_chunk(M,P)
2261 #define check_free_chunk(M,P) do_check_free_chunk(M,P)
2262 #define check_inuse_chunk(M,P) do_check_inuse_chunk(M,P)
2263 #define check_top_chunk(M,P) do_check_top_chunk(M,P)
2264 #define check_malloced_chunk(M,P,N) do_check_malloced_chunk(M,P,N)
2265 #define check_mmapped_chunk(M,P) do_check_mmapped_chunk(M,P)
2266 #define check_malloc_state(M) do_check_malloc_state(M)
2268 static void do_check_any_chunk(mstate m
, mchunkptr p
);
2269 static void do_check_top_chunk(mstate m
, mchunkptr p
);
2270 static void do_check_mmapped_chunk(mstate m
, mchunkptr p
);
2271 static void do_check_inuse_chunk(mstate m
, mchunkptr p
);
2272 static void do_check_free_chunk(mstate m
, mchunkptr p
);
2273 static void do_check_malloced_chunk(mstate m
, void* mem
, size_t s
);
2274 static void do_check_tree(mstate m
, tchunkptr t
);
2275 static void do_check_treebin(mstate m
, bindex_t i
);
2276 static void do_check_smallbin(mstate m
, bindex_t i
);
2277 static void do_check_malloc_state(mstate m
);
2278 static int bin_find(mstate m
, mchunkptr x
);
2279 static size_t traverse_and_check(mstate m
);
2282 /* ---------------------------- Indexing Bins ---------------------------- */
2284 #define is_small(s) (((s) >> SMALLBIN_SHIFT) < NSMALLBINS)
2285 #define small_index(s) ((s) >> SMALLBIN_SHIFT)
2286 #define small_index2size(i) ((i) << SMALLBIN_SHIFT)
2287 #define MIN_SMALL_INDEX (small_index(MIN_CHUNK_SIZE))
2289 /* addressing by index. See above about smallbin repositioning */
2290 #define smallbin_at(M, i) ((sbinptr)((char*)&((M)->smallbins[(i)<<1])))
2291 #define treebin_at(M,i) (&((M)->treebins[i]))
2293 /* assign tree index for size S to variable I */
2294 #if defined(__GNUC__) && defined(__i386__)
2295 #define compute_tree_index(S, I)\
2297 size_t X = S >> TREEBIN_SHIFT;\
2300 else if (X > 0xFFFF)\
2304 __asm__("bsrl %1,%0\n\t" : "=r" (K) : "rm" (X));\
2305 I = (bindex_t)((K << 1) + ((S >> (K + (TREEBIN_SHIFT-1)) & 1)));\
2309 #define compute_tree_index(S, I)\
2311 size_t X = S >> TREEBIN_SHIFT;\
2314 else if (X > 0xFFFF)\
2317 unsigned int Y = (unsigned int)X;\
2318 unsigned int N = ((Y - 0x100) >> 16) & 8;\
2319 unsigned int K = (((Y <<= N) - 0x1000) >> 16) & 4;\
2321 N += K = (((Y <<= K) - 0x4000) >> 16) & 2;\
2322 K = 14 - N + ((Y <<= K) >> 15);\
2323 I = (K << 1) + ((S >> (K + (TREEBIN_SHIFT-1)) & 1));\
2328 /* Bit representing maximum resolved size in a treebin at i */
2329 #define bit_for_tree_index(i) \
2330 (i == NTREEBINS-1)? (SIZE_T_BITSIZE-1) : (((i) >> 1) + TREEBIN_SHIFT - 2)
2332 /* Shift placing maximum resolved bit in a treebin at i as sign bit */
2333 #define leftshift_for_tree_index(i) \
2334 ((i == NTREEBINS-1)? 0 : \
2335 ((SIZE_T_BITSIZE-SIZE_T_ONE) - (((i) >> 1) + TREEBIN_SHIFT - 2)))
2337 /* The size of the smallest chunk held in bin with index i */
2338 #define minsize_for_tree_index(i) \
2339 ((SIZE_T_ONE << (((i) >> 1) + TREEBIN_SHIFT)) | \
2340 (((size_t)((i) & SIZE_T_ONE)) << (((i) >> 1) + TREEBIN_SHIFT - 1)))
2343 /* ------------------------ Operations on bin maps ----------------------- */
2345 /* bit corresponding to given index */
2346 #define idx2bit(i) ((binmap_t)(1) << (i))
2348 /* Mark/Clear bits with given index */
2349 #define mark_smallmap(M,i) ((M)->smallmap |= idx2bit(i))
2350 #define clear_smallmap(M,i) ((M)->smallmap &= ~idx2bit(i))
2351 #define smallmap_is_marked(M,i) ((M)->smallmap & idx2bit(i))
2353 #define mark_treemap(M,i) ((M)->treemap |= idx2bit(i))
2354 #define clear_treemap(M,i) ((M)->treemap &= ~idx2bit(i))
2355 #define treemap_is_marked(M,i) ((M)->treemap & idx2bit(i))
2357 /* index corresponding to given bit */
2359 #if defined(__GNUC__) && defined(__i386__)
2360 #define compute_bit2idx(X, I)\
2363 __asm__("bsfl %1,%0\n\t" : "=r" (J) : "rm" (X));\
2369 #define compute_bit2idx(X, I) I = ffs(X)-1
2371 #else /* USE_BUILTIN_FFS */
2372 #define compute_bit2idx(X, I)\
2374 unsigned int Y = X - 1;\
2375 unsigned int K = Y >> (16-4) & 16;\
2376 unsigned int N = K; Y >>= K;\
2377 N += K = Y >> (8-3) & 8; Y >>= K;\
2378 N += K = Y >> (4-2) & 4; Y >>= K;\
2379 N += K = Y >> (2-1) & 2; Y >>= K;\
2380 N += K = Y >> (1-0) & 1; Y >>= K;\
2381 I = (bindex_t)(N + Y);\
2383 #endif /* USE_BUILTIN_FFS */
2386 /* isolate the least set bit of a bitmap */
2387 #define least_bit(x) ((x) & -(x))
2389 /* mask with all bits to left of least bit of x on */
2390 #define left_bits(x) ((x<<1) | -(x<<1))
2392 /* mask with all bits to left of or equal to least bit of x on */
2393 #define same_or_left_bits(x) ((x) | -(x))
2396 /* ----------------------- Runtime Check Support ------------------------- */
2399 For security, the main invariant is that malloc/free/etc never
2400 writes to a static address other than malloc_state, unless static
2401 malloc_state itself has been corrupted, which cannot occur via
2402 malloc (because of these checks). In essence this means that we
2403 believe all pointers, sizes, maps etc held in malloc_state, but
2404 check all of those linked or offsetted from other embedded data
2405 structures. These checks are interspersed with main code in a way
2406 that tends to minimize their run-time cost.
2408 When FOOTERS is defined, in addition to range checking, we also
2409 verify footer fields of inuse chunks, which can be used guarantee
2410 that the mstate controlling malloc/free is intact. This is a
2411 streamlined version of the approach described by William Robertson
2412 et al in "Run-time Detection of Heap-based Overflows" LISA'03
2413 http://www.usenix.org/events/lisa03/tech/robertson.html The footer
2414 of an inuse chunk holds the xor of its mstate and a random seed,
2415 that is checked upon calls to free() and realloc(). This is
2416 (probablistically) unguessable from outside the program, but can be
2417 computed by any code successfully malloc'ing any chunk, so does not
2418 itself provide protection against code that has already broken
2419 security through some other means. Unlike Robertson et al, we
2420 always dynamically check addresses of all offset chunks (previous,
2421 next, etc). This turns out to be cheaper than relying on hashes.
2425 /* Check if address a is at least as high as any from MORECORE or MMAP */
2426 #define ok_address(M, a) ((char*)(a) >= (M)->least_addr)
2427 /* Check if address of next chunk n is higher than base chunk p */
2428 #define ok_next(p, n) ((char*)(p) < (char*)(n))
2429 /* Check if p has its cinuse bit on */
2430 #define ok_cinuse(p) cinuse(p)
2431 /* Check if p has its pinuse bit on */
2432 #define ok_pinuse(p) pinuse(p)
2434 #else /* !INSECURE */
2435 #define ok_address(M, a) (1)
2436 #define ok_next(b, n) (1)
2437 #define ok_cinuse(p) (1)
2438 #define ok_pinuse(p) (1)
2439 #endif /* !INSECURE */
2441 #if (FOOTERS && !INSECURE)
2442 /* Check if (alleged) mstate m has expected magic field */
2443 #define ok_magic(M) ((M)->magic == mparams.magic)
2444 #else /* (FOOTERS && !INSECURE) */
2445 #define ok_magic(M) (1)
2446 #endif /* (FOOTERS && !INSECURE) */
2449 /* In gcc, use __builtin_expect to minimize impact of checks */
2451 #if defined(__GNUC__) && __GNUC__ >= 3
2452 #define RTCHECK(e) __builtin_expect(e, 1)
2454 #define RTCHECK(e) (e)
2456 #else /* !INSECURE */
2457 #define RTCHECK(e) (1)
2458 #endif /* !INSECURE */
2460 /* macros to set up inuse chunks with or without footers */
2464 #define mark_inuse_foot(M,p,s)
2466 /* Set cinuse bit and pinuse bit of next chunk */
2467 #define set_inuse(M,p,s)\
2468 ((p)->head = (((p)->head & PINUSE_BIT)|s|CINUSE_BIT),\
2469 ((mchunkptr)(((char*)(p)) + (s)))->head |= PINUSE_BIT)
2471 /* Set cinuse and pinuse of this chunk and pinuse of next chunk */
2472 #define set_inuse_and_pinuse(M,p,s)\
2473 ((p)->head = (s|PINUSE_BIT|CINUSE_BIT),\
2474 ((mchunkptr)(((char*)(p)) + (s)))->head |= PINUSE_BIT)
2476 /* Set size, cinuse and pinuse bit of this chunk */
2477 #define set_size_and_pinuse_of_inuse_chunk(M, p, s)\
2478 ((p)->head = (s|PINUSE_BIT|CINUSE_BIT))
2482 /* Set foot of inuse chunk to be xor of mstate and seed */
2483 #define mark_inuse_foot(M,p,s)\
2484 (((mchunkptr)((char*)(p) + (s)))->prev_foot = ((size_t)(M) ^ mparams.magic))
2486 #define get_mstate_for(p)\
2487 ((mstate)(((mchunkptr)((char*)(p) +\
2488 (chunksize(p))))->prev_foot ^ mparams.magic))
2490 #define set_inuse(M,p,s)\
2491 ((p)->head = (((p)->head & PINUSE_BIT)|s|CINUSE_BIT),\
2492 (((mchunkptr)(((char*)(p)) + (s)))->head |= PINUSE_BIT), \
2493 mark_inuse_foot(M,p,s))
2495 #define set_inuse_and_pinuse(M,p,s)\
2496 ((p)->head = (s|PINUSE_BIT|CINUSE_BIT),\
2497 (((mchunkptr)(((char*)(p)) + (s)))->head |= PINUSE_BIT),\
2498 mark_inuse_foot(M,p,s))
2500 #define set_size_and_pinuse_of_inuse_chunk(M, p, s)\
2501 ((p)->head = (s|PINUSE_BIT|CINUSE_BIT),\
2502 mark_inuse_foot(M, p, s))
2504 #endif /* !FOOTERS */
2506 /* ---------------------------- setting mparams -------------------------- */
2508 /* Initialize mparams */
2509 static int init_mparams(void) {
2510 if (mparams
.page_size
== 0) {
2513 mparams
.mmap_threshold
= DEFAULT_MMAP_THRESHOLD
;
2514 mparams
.trim_threshold
= DEFAULT_TRIM_THRESHOLD
;
2515 #if MORECORE_CONTIGUOUS
2516 mparams
.default_mflags
= USE_LOCK_BIT
|USE_MMAP_BIT
;
2517 #else /* MORECORE_CONTIGUOUS */
2518 mparams
.default_mflags
= USE_LOCK_BIT
|USE_MMAP_BIT
|USE_NONCONTIGUOUS_BIT
;
2519 #endif /* MORECORE_CONTIGUOUS */
2521 #if (FOOTERS && !INSECURE)
2525 unsigned char buf
[sizeof(size_t)];
2526 /* Try to use /dev/urandom, else fall back on using time */
2527 if ((fd
= open("/dev/urandom", O_RDONLY
)) >= 0 &&
2528 read(fd
, buf
, sizeof(buf
)) == sizeof(buf
)) {
2529 s
= *((size_t *) buf
);
2533 #endif /* USE_DEV_RANDOM */
2534 s
= (size_t)(time(0) ^ (size_t)0x55555555U
);
2536 s
|= (size_t)8U; /* ensure nonzero */
2537 s
&= ~(size_t)7U; /* improve chances of fault for bad values */
2540 #else /* (FOOTERS && !INSECURE) */
2541 s
= (size_t)0x58585858U
;
2542 #endif /* (FOOTERS && !INSECURE) */
2543 ACQUIRE_MAGIC_INIT_LOCK();
2544 if (mparams
.magic
== 0) {
2546 /* Set up lock for main malloc area */
2547 INITIAL_LOCK(&gm
->mutex
);
2548 gm
->mflags
= mparams
.default_mflags
;
2550 RELEASE_MAGIC_INIT_LOCK();
2552 #if !defined(WIN32) && !defined(__OS2__)
2553 mparams
.page_size
= malloc_getpagesize
;
2554 mparams
.granularity
= ((DEFAULT_GRANULARITY
!= 0)?
2555 DEFAULT_GRANULARITY
: mparams
.page_size
);
2556 #elif defined (__OS2__)
2557 /* if low-memory is used, os2munmap() would break
2558 if it were anything other than 64k */
2559 mparams
.page_size
= 4096u;
2560 mparams
.granularity
= 65536u;
2563 SYSTEM_INFO system_info
;
2564 GetSystemInfo(&system_info
);
2565 mparams
.page_size
= system_info
.dwPageSize
;
2566 mparams
.granularity
= system_info
.dwAllocationGranularity
;
2570 /* Sanity-check configuration:
2571 size_t must be unsigned and as wide as pointer type.
2572 ints must be at least 4 bytes.
2573 alignment must be at least 8.
2574 Alignment, min chunk size, and page size must all be powers of 2.
2576 if ((sizeof(size_t) != sizeof(char*)) ||
2577 (MAX_SIZE_T
< MIN_CHUNK_SIZE
) ||
2578 (sizeof(int) < 4) ||
2579 (MALLOC_ALIGNMENT
< (size_t)8U) ||
2580 ((MALLOC_ALIGNMENT
& (MALLOC_ALIGNMENT
-SIZE_T_ONE
)) != 0) ||
2581 ((MCHUNK_SIZE
& (MCHUNK_SIZE
-SIZE_T_ONE
)) != 0) ||
2582 ((mparams
.granularity
& (mparams
.granularity
-SIZE_T_ONE
)) != 0) ||
2583 ((mparams
.page_size
& (mparams
.page_size
-SIZE_T_ONE
)) != 0))
2589 /* support for mallopt */
2590 static int change_mparam(int param_number
, int value
) {
2591 size_t val
= (size_t)value
;
2593 switch(param_number
) {
2594 case M_TRIM_THRESHOLD
:
2595 mparams
.trim_threshold
= val
;
2598 if (val
>= mparams
.page_size
&& ((val
& (val
-1)) == 0)) {
2599 mparams
.granularity
= val
;
2604 case M_MMAP_THRESHOLD
:
2605 mparams
.mmap_threshold
= val
;
2613 /* ------------------------- Debugging Support --------------------------- */
2615 /* Check properties of any chunk, whether free, inuse, mmapped etc */
2616 static void do_check_any_chunk(mstate m
, mchunkptr p
) {
2617 assert((is_aligned(chunk2mem(p
))) || (p
->head
== FENCEPOST_HEAD
));
2618 assert(ok_address(m
, p
));
2621 /* Check properties of top chunk */
2622 static void do_check_top_chunk(mstate m
, mchunkptr p
) {
2623 msegmentptr sp
= segment_holding(m
, (char*)p
);
2624 size_t sz
= chunksize(p
);
2626 assert((is_aligned(chunk2mem(p
))) || (p
->head
== FENCEPOST_HEAD
));
2627 assert(ok_address(m
, p
));
2628 assert(sz
== m
->topsize
);
2630 assert(sz
== ((sp
->base
+ sp
->size
) - (char*)p
) - TOP_FOOT_SIZE
);
2632 assert(!next_pinuse(p
));
2635 /* Check properties of (inuse) mmapped chunks */
2636 static void do_check_mmapped_chunk(mstate m
, mchunkptr p
) {
2637 size_t sz
= chunksize(p
);
2638 size_t len
= (sz
+ (p
->prev_foot
& ~IS_MMAPPED_BIT
) + MMAP_FOOT_PAD
);
2639 assert(is_mmapped(p
));
2640 assert(use_mmap(m
));
2641 assert((is_aligned(chunk2mem(p
))) || (p
->head
== FENCEPOST_HEAD
));
2642 assert(ok_address(m
, p
));
2643 assert(!is_small(sz
));
2644 assert((len
& (mparams
.page_size
-SIZE_T_ONE
)) == 0);
2645 assert(chunk_plus_offset(p
, sz
)->head
== FENCEPOST_HEAD
);
2646 assert(chunk_plus_offset(p
, sz
+SIZE_T_SIZE
)->head
== 0);
2649 /* Check properties of inuse chunks */
2650 static void do_check_inuse_chunk(mstate m
, mchunkptr p
) {
2651 do_check_any_chunk(m
, p
);
2653 assert(next_pinuse(p
));
2654 /* If not pinuse and not mmapped, previous chunk has OK offset */
2655 assert(is_mmapped(p
) || pinuse(p
) || next_chunk(prev_chunk(p
)) == p
);
2657 do_check_mmapped_chunk(m
, p
);
2660 /* Check properties of free chunks */
2661 static void do_check_free_chunk(mstate m
, mchunkptr p
) {
2662 size_t sz
= p
->head
& ~(PINUSE_BIT
|CINUSE_BIT
);
2663 mchunkptr next
= chunk_plus_offset(p
, sz
);
2664 do_check_any_chunk(m
, p
);
2666 assert(!next_pinuse(p
));
2667 assert (!is_mmapped(p
));
2668 if (p
!= m
->dv
&& p
!= m
->top
) {
2669 if (sz
>= MIN_CHUNK_SIZE
) {
2670 assert((sz
& CHUNK_ALIGN_MASK
) == 0);
2671 assert(is_aligned(chunk2mem(p
)));
2672 assert(next
->prev_foot
== sz
);
2674 assert (next
== m
->top
|| cinuse(next
));
2675 assert(p
->fd
->bk
== p
);
2676 assert(p
->bk
->fd
== p
);
2678 else /* markers are always of size SIZE_T_SIZE */
2679 assert(sz
== SIZE_T_SIZE
);
2683 /* Check properties of malloced chunks at the point they are malloced */
2684 static void do_check_malloced_chunk(mstate m
, void* mem
, size_t s
) {
2686 mchunkptr p
= mem2chunk(mem
);
2687 size_t sz
= p
->head
& ~(PINUSE_BIT
|CINUSE_BIT
);
2688 do_check_inuse_chunk(m
, p
);
2689 assert((sz
& CHUNK_ALIGN_MASK
) == 0);
2690 assert(sz
>= MIN_CHUNK_SIZE
);
2692 /* unless mmapped, size is less than MIN_CHUNK_SIZE more than request */
2693 assert(is_mmapped(p
) || sz
< (s
+ MIN_CHUNK_SIZE
));
2697 /* Check a tree and its subtrees. */
2698 static void do_check_tree(mstate m
, tchunkptr t
) {
2701 bindex_t tindex
= t
->index
;
2702 size_t tsize
= chunksize(t
);
2704 compute_tree_index(tsize
, idx
);
2705 assert(tindex
== idx
);
2706 assert(tsize
>= MIN_LARGE_SIZE
);
2707 assert(tsize
>= minsize_for_tree_index(idx
));
2708 assert((idx
== NTREEBINS
-1) || (tsize
< minsize_for_tree_index((idx
+1))));
2710 do { /* traverse through chain of same-sized nodes */
2711 do_check_any_chunk(m
, ((mchunkptr
)u
));
2712 assert(u
->index
== tindex
);
2713 assert(chunksize(u
) == tsize
);
2715 assert(!next_pinuse(u
));
2716 assert(u
->fd
->bk
== u
);
2717 assert(u
->bk
->fd
== u
);
2718 if (u
->parent
== 0) {
2719 assert(u
->child
[0] == 0);
2720 assert(u
->child
[1] == 0);
2723 assert(head
== 0); /* only one node on chain has parent */
2725 assert(u
->parent
!= u
);
2726 assert (u
->parent
->child
[0] == u
||
2727 u
->parent
->child
[1] == u
||
2728 *((tbinptr
*)(u
->parent
)) == u
);
2729 if (u
->child
[0] != 0) {
2730 assert(u
->child
[0]->parent
== u
);
2731 assert(u
->child
[0] != u
);
2732 do_check_tree(m
, u
->child
[0]);
2734 if (u
->child
[1] != 0) {
2735 assert(u
->child
[1]->parent
== u
);
2736 assert(u
->child
[1] != u
);
2737 do_check_tree(m
, u
->child
[1]);
2739 if (u
->child
[0] != 0 && u
->child
[1] != 0) {
2740 assert(chunksize(u
->child
[0]) < chunksize(u
->child
[1]));
2748 /* Check all the chunks in a treebin. */
2749 static void do_check_treebin(mstate m
, bindex_t i
) {
2750 tbinptr
* tb
= treebin_at(m
, i
);
2752 int empty
= (m
->treemap
& (1U << i
)) == 0;
2756 do_check_tree(m
, t
);
2759 /* Check all the chunks in a smallbin. */
2760 static void do_check_smallbin(mstate m
, bindex_t i
) {
2761 sbinptr b
= smallbin_at(m
, i
);
2762 mchunkptr p
= b
->bk
;
2763 unsigned int empty
= (m
->smallmap
& (1U << i
)) == 0;
2767 for (; p
!= b
; p
= p
->bk
) {
2768 size_t size
= chunksize(p
);
2770 /* each chunk claims to be free */
2771 do_check_free_chunk(m
, p
);
2772 /* chunk belongs in bin */
2773 assert(small_index(size
) == i
);
2774 assert(p
->bk
== b
|| chunksize(p
->bk
) == chunksize(p
));
2775 /* chunk is followed by an inuse chunk */
2777 if (q
->head
!= FENCEPOST_HEAD
)
2778 do_check_inuse_chunk(m
, q
);
2783 /* Find x in a bin. Used in other check functions. */
2784 static int bin_find(mstate m
, mchunkptr x
) {
2785 size_t size
= chunksize(x
);
2786 if (is_small(size
)) {
2787 bindex_t sidx
= small_index(size
);
2788 sbinptr b
= smallbin_at(m
, sidx
);
2789 if (smallmap_is_marked(m
, sidx
)) {
2794 } while ((p
= p
->fd
) != b
);
2799 compute_tree_index(size
, tidx
);
2800 if (treemap_is_marked(m
, tidx
)) {
2801 tchunkptr t
= *treebin_at(m
, tidx
);
2802 size_t sizebits
= size
<< leftshift_for_tree_index(tidx
);
2803 while (t
!= 0 && chunksize(t
) != size
) {
2804 t
= t
->child
[(sizebits
>> (SIZE_T_BITSIZE
-SIZE_T_ONE
)) & 1];
2810 if (u
== (tchunkptr
)x
)
2812 } while ((u
= u
->fd
) != t
);
2819 /* Traverse each chunk and check it; return total */
2820 static size_t traverse_and_check(mstate m
) {
2822 if (is_initialized(m
)) {
2823 msegmentptr s
= &m
->seg
;
2824 sum
+= m
->topsize
+ TOP_FOOT_SIZE
;
2826 mchunkptr q
= align_as_chunk(s
->base
);
2827 mchunkptr lastq
= 0;
2829 while (segment_holds(s
, q
) &&
2830 q
!= m
->top
&& q
->head
!= FENCEPOST_HEAD
) {
2831 sum
+= chunksize(q
);
2833 assert(!bin_find(m
, q
));
2834 do_check_inuse_chunk(m
, q
);
2837 assert(q
== m
->dv
|| bin_find(m
, q
));
2838 assert(lastq
== 0 || cinuse(lastq
)); /* Not 2 consecutive free */
2839 do_check_free_chunk(m
, q
);
2850 /* Check all properties of malloc_state. */
2851 static void do_check_malloc_state(mstate m
) {
2855 for (i
= 0; i
< NSMALLBINS
; ++i
)
2856 do_check_smallbin(m
, i
);
2857 for (i
= 0; i
< NTREEBINS
; ++i
)
2858 do_check_treebin(m
, i
);
2860 if (m
->dvsize
!= 0) { /* check dv chunk */
2861 do_check_any_chunk(m
, m
->dv
);
2862 assert(m
->dvsize
== chunksize(m
->dv
));
2863 assert(m
->dvsize
>= MIN_CHUNK_SIZE
);
2864 assert(bin_find(m
, m
->dv
) == 0);
2867 if (m
->top
!= 0) { /* check top chunk */
2868 do_check_top_chunk(m
, m
->top
);
2869 assert(m
->topsize
== chunksize(m
->top
));
2870 assert(m
->topsize
> 0);
2871 assert(bin_find(m
, m
->top
) == 0);
2874 total
= traverse_and_check(m
);
2875 assert(total
<= m
->footprint
);
2876 assert(m
->footprint
<= m
->max_footprint
);
2880 /* ----------------------------- statistics ------------------------------ */
2883 static struct mallinfo
internal_mallinfo(mstate m
) {
2884 struct mallinfo nm
= { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
2885 if (!PREACTION(m
)) {
2886 check_malloc_state(m
);
2887 if (is_initialized(m
)) {
2888 size_t nfree
= SIZE_T_ONE
; /* top always free */
2889 size_t mfree
= m
->topsize
+ TOP_FOOT_SIZE
;
2891 msegmentptr s
= &m
->seg
;
2893 mchunkptr q
= align_as_chunk(s
->base
);
2894 while (segment_holds(s
, q
) &&
2895 q
!= m
->top
&& q
->head
!= FENCEPOST_HEAD
) {
2896 size_t sz
= chunksize(q
);
2909 nm
.hblkhd
= m
->footprint
- sum
;
2910 nm
.usmblks
= m
->max_footprint
;
2911 nm
.uordblks
= m
->footprint
- mfree
;
2912 nm
.fordblks
= mfree
;
2913 nm
.keepcost
= m
->topsize
;
2920 #endif /* !NO_MALLINFO */
2922 static void internal_malloc_stats(mstate m
) {
2923 if (!PREACTION(m
)) {
2927 check_malloc_state(m
);
2928 if (is_initialized(m
)) {
2929 msegmentptr s
= &m
->seg
;
2930 maxfp
= m
->max_footprint
;
2932 used
= fp
- (m
->topsize
+ TOP_FOOT_SIZE
);
2935 mchunkptr q
= align_as_chunk(s
->base
);
2936 while (segment_holds(s
, q
) &&
2937 q
!= m
->top
&& q
->head
!= FENCEPOST_HEAD
) {
2939 used
-= chunksize(q
);
2946 fprintf(stderr
, "max system bytes = %10lu\n", (unsigned long)(maxfp
));
2947 fprintf(stderr
, "system bytes = %10lu\n", (unsigned long)(fp
));
2948 fprintf(stderr
, "in use bytes = %10lu\n", (unsigned long)(used
));
2954 /* ----------------------- Operations on smallbins ----------------------- */
2957 Various forms of linking and unlinking are defined as macros. Even
2958 the ones for trees, which are very long but have very short typical
2959 paths. This is ugly but reduces reliance on inlining support of
2963 /* Link a free chunk into a smallbin */
2964 #define insert_small_chunk(M, P, S) {\
2965 bindex_t I = small_index(S);\
2966 mchunkptr B = smallbin_at(M, I);\
2968 assert(S >= MIN_CHUNK_SIZE);\
2969 if (!smallmap_is_marked(M, I))\
2970 mark_smallmap(M, I);\
2971 else if (RTCHECK(ok_address(M, B->fd)))\
2974 CORRUPTION_ERROR_ACTION(M);\
2982 /* Unlink a chunk from a smallbin */
2983 #define unlink_small_chunk(M, P, S) {\
2984 mchunkptr F = P->fd;\
2985 mchunkptr B = P->bk;\
2986 bindex_t I = small_index(S);\
2989 assert(chunksize(P) == small_index2size(I));\
2991 clear_smallmap(M, I);\
2992 else if (RTCHECK((F == smallbin_at(M,I) || ok_address(M, F)) &&\
2993 (B == smallbin_at(M,I) || ok_address(M, B)))) {\
2998 CORRUPTION_ERROR_ACTION(M);\
3002 /* Unlink the first chunk from a smallbin */
3003 #define unlink_first_small_chunk(M, B, P, I) {\
3004 mchunkptr F = P->fd;\
3007 assert(chunksize(P) == small_index2size(I));\
3009 clear_smallmap(M, I);\
3010 else if (RTCHECK(ok_address(M, F))) {\
3015 CORRUPTION_ERROR_ACTION(M);\
3019 /* Replace dv node, binning the old one */
3020 /* Used only when dvsize known to be small */
3021 #define replace_dv(M, P, S) {\
3022 size_t DVS = M->dvsize;\
3024 mchunkptr DV = M->dv;\
3025 assert(is_small(DVS));\
3026 insert_small_chunk(M, DV, DVS);\
3032 /* ------------------------- Operations on trees ------------------------- */
3034 /* Insert chunk into tree */
3035 #define insert_large_chunk(M, X, S) {\
3038 compute_tree_index(S, I);\
3039 H = treebin_at(M, I);\
3041 X->child[0] = X->child[1] = 0;\
3042 if (!treemap_is_marked(M, I)) {\
3043 mark_treemap(M, I);\
3045 X->parent = (tchunkptr)H;\
3050 size_t K = S << leftshift_for_tree_index(I);\
3052 if (chunksize(T) != S) {\
3053 tchunkptr* C = &(T->child[(K >> (SIZE_T_BITSIZE-SIZE_T_ONE)) & 1]);\
3057 else if (RTCHECK(ok_address(M, C))) {\
3064 CORRUPTION_ERROR_ACTION(M);\
3069 tchunkptr F = T->fd;\
3070 if (RTCHECK(ok_address(M, T) && ok_address(M, F))) {\
3078 CORRUPTION_ERROR_ACTION(M);\
3089 1. If x is a chained node, unlink it from its same-sized fd/bk links
3090 and choose its bk node as its replacement.
3091 2. If x was the last node of its size, but not a leaf node, it must
3092 be replaced with a leaf node (not merely one with an open left or
3093 right), to make sure that lefts and rights of descendants
3094 correspond properly to bit masks. We use the rightmost descendant
3095 of x. We could use any other leaf, but this is easy to locate and
3096 tends to counteract removal of leftmosts elsewhere, and so keeps
3097 paths shorter than minimally guaranteed. This doesn't loop much
3098 because on average a node in a tree is near the bottom.
3099 3. If x is the base of a chain (i.e., has parent links) relink
3100 x's parent and children to x's replacement (or null if none).
3103 #define unlink_large_chunk(M, X) {\
3104 tchunkptr XP = X->parent;\
3107 tchunkptr F = X->fd;\
3109 if (RTCHECK(ok_address(M, F))) {\
3114 CORRUPTION_ERROR_ACTION(M);\
3119 if (((R = *(RP = &(X->child[1]))) != 0) ||\
3120 ((R = *(RP = &(X->child[0]))) != 0)) {\
3122 while ((*(CP = &(R->child[1])) != 0) ||\
3123 (*(CP = &(R->child[0])) != 0)) {\
3126 if (RTCHECK(ok_address(M, RP)))\
3129 CORRUPTION_ERROR_ACTION(M);\
3134 tbinptr* H = treebin_at(M, X->index);\
3136 if ((*H = R) == 0) \
3137 clear_treemap(M, X->index);\
3139 else if (RTCHECK(ok_address(M, XP))) {\
3140 if (XP->child[0] == X) \
3146 CORRUPTION_ERROR_ACTION(M);\
3148 if (RTCHECK(ok_address(M, R))) {\
3151 if ((C0 = X->child[0]) != 0) {\
3152 if (RTCHECK(ok_address(M, C0))) {\
3157 CORRUPTION_ERROR_ACTION(M);\
3159 if ((C1 = X->child[1]) != 0) {\
3160 if (RTCHECK(ok_address(M, C1))) {\
3165 CORRUPTION_ERROR_ACTION(M);\
3169 CORRUPTION_ERROR_ACTION(M);\
3174 /* Relays to large vs small bin operations */
3176 #define insert_chunk(M, P, S)\
3177 if (is_small(S)) insert_small_chunk(M, P, S)\
3178 else { tchunkptr TP = (tchunkptr)(P); insert_large_chunk(M, TP, S); }
3180 #define unlink_chunk(M, P, S)\
3181 if (is_small(S)) unlink_small_chunk(M, P, S)\
3182 else { tchunkptr TP = (tchunkptr)(P); unlink_large_chunk(M, TP); }
3185 /* Relays to internal calls to malloc/free from realloc, memalign etc */
3188 #define internal_malloc(m, b) mspace_malloc(m, b)
3189 #define internal_free(m, mem) mspace_free(m,mem);
3190 #else /* ONLY_MSPACES */
3192 #define internal_malloc(m, b)\
3193 (m == gm)? dlmalloc(b) : mspace_malloc(m, b)
3194 #define internal_free(m, mem)\
3195 if (m == gm) dlfree(mem); else mspace_free(m,mem);
3197 #define internal_malloc(m, b) dlmalloc(b)
3198 #define internal_free(m, mem) dlfree(mem)
3199 #endif /* MSPACES */
3200 #endif /* ONLY_MSPACES */
3202 /* ----------------------- Direct-mmapping chunks ----------------------- */
3205 Directly mmapped chunks are set up with an offset to the start of
3206 the mmapped region stored in the prev_foot field of the chunk. This
3207 allows reconstruction of the required argument to MUNMAP when freed,
3208 and also allows adjustment of the returned chunk to meet alignment
3209 requirements (especially in memalign). There is also enough space
3210 allocated to hold a fake next chunk of size SIZE_T_SIZE to maintain
3211 the PINUSE bit so frees can be checked.
3214 /* Malloc using mmap */
3215 static void* mmap_alloc(mstate m
, size_t nb
) {
3216 size_t mmsize
= granularity_align(nb
+ SIX_SIZE_T_SIZES
+ CHUNK_ALIGN_MASK
);
3217 if (mmsize
> nb
) { /* Check for wrap around 0 */
3218 char* mm
= (char*)(DIRECT_MMAP(mmsize
));
3220 size_t offset
= align_offset(chunk2mem(mm
));
3221 size_t psize
= mmsize
- offset
- MMAP_FOOT_PAD
;
3222 mchunkptr p
= (mchunkptr
)(mm
+ offset
);
3223 p
->prev_foot
= offset
| IS_MMAPPED_BIT
;
3224 (p
)->head
= (psize
|CINUSE_BIT
);
3225 mark_inuse_foot(m
, p
, psize
);
3226 chunk_plus_offset(p
, psize
)->head
= FENCEPOST_HEAD
;
3227 chunk_plus_offset(p
, psize
+SIZE_T_SIZE
)->head
= 0;
3229 if (mm
< m
->least_addr
)
3231 if ((m
->footprint
+= mmsize
) > m
->max_footprint
)
3232 m
->max_footprint
= m
->footprint
;
3233 assert(is_aligned(chunk2mem(p
)));
3234 check_mmapped_chunk(m
, p
);
3235 return chunk2mem(p
);
3241 /* Realloc using mmap */
3242 static mchunkptr
mmap_resize(mstate m
, mchunkptr oldp
, size_t nb
) {
3243 size_t oldsize
= chunksize(oldp
);
3244 if (is_small(nb
)) /* Can't shrink mmap regions below small size */
3246 /* Keep old chunk if big enough but not too big */
3247 if (oldsize
>= nb
+ SIZE_T_SIZE
&&
3248 (oldsize
- nb
) <= (mparams
.granularity
<< 1))
3251 size_t offset
= oldp
->prev_foot
& ~IS_MMAPPED_BIT
;
3252 size_t oldmmsize
= oldsize
+ offset
+ MMAP_FOOT_PAD
;
3253 size_t newmmsize
= granularity_align(nb
+ SIX_SIZE_T_SIZES
+
3255 char* cp
= (char*)CALL_MREMAP((char*)oldp
- offset
,
3256 oldmmsize
, newmmsize
, 1);
3258 mchunkptr newp
= (mchunkptr
)(cp
+ offset
);
3259 size_t psize
= newmmsize
- offset
- MMAP_FOOT_PAD
;
3260 newp
->head
= (psize
|CINUSE_BIT
);
3261 mark_inuse_foot(m
, newp
, psize
);
3262 chunk_plus_offset(newp
, psize
)->head
= FENCEPOST_HEAD
;
3263 chunk_plus_offset(newp
, psize
+SIZE_T_SIZE
)->head
= 0;
3265 if (cp
< m
->least_addr
)
3267 if ((m
->footprint
+= newmmsize
- oldmmsize
) > m
->max_footprint
)
3268 m
->max_footprint
= m
->footprint
;
3269 check_mmapped_chunk(m
, newp
);
3276 /* -------------------------- mspace management -------------------------- */
3278 /* Initialize top chunk and its size */
3279 static void init_top(mstate m
, mchunkptr p
, size_t psize
) {
3280 /* Ensure alignment */
3281 size_t offset
= align_offset(chunk2mem(p
));
3282 p
= (mchunkptr
)((char*)p
+ offset
);
3287 p
->head
= psize
| PINUSE_BIT
;
3288 /* set size of fake trailing chunk holding overhead space only once */
3289 chunk_plus_offset(p
, psize
)->head
= TOP_FOOT_SIZE
;
3290 m
->trim_check
= mparams
.trim_threshold
; /* reset on each update */
3293 /* Initialize bins for a new mstate that is otherwise zeroed out */
3294 static void init_bins(mstate m
) {
3295 /* Establish circular links for smallbins */
3297 for (i
= 0; i
< NSMALLBINS
; ++i
) {
3298 sbinptr bin
= smallbin_at(m
,i
);
3299 bin
->fd
= bin
->bk
= bin
;
3303 #if PROCEED_ON_ERROR
3305 /* default corruption action */
3306 static void reset_on_error(mstate m
) {
3308 ++malloc_corruption_error_count
;
3309 /* Reinitialize fields to forget about all memory */
3310 m
->smallbins
= m
->treebins
= 0;
3311 m
->dvsize
= m
->topsize
= 0;
3316 for (i
= 0; i
< NTREEBINS
; ++i
)
3317 *treebin_at(m
, i
) = 0;
3320 #endif /* PROCEED_ON_ERROR */
3322 /* Allocate chunk and prepend remainder with chunk in successor base. */
3323 static void* prepend_alloc(mstate m
, char* newbase
, char* oldbase
,
3325 mchunkptr p
= align_as_chunk(newbase
);
3326 mchunkptr oldfirst
= align_as_chunk(oldbase
);
3327 size_t psize
= (char*)oldfirst
- (char*)p
;
3328 mchunkptr q
= chunk_plus_offset(p
, nb
);
3329 size_t qsize
= psize
- nb
;
3330 set_size_and_pinuse_of_inuse_chunk(m
, p
, nb
);
3332 assert((char*)oldfirst
> (char*)q
);
3333 assert(pinuse(oldfirst
));
3334 assert(qsize
>= MIN_CHUNK_SIZE
);
3336 /* consolidate remainder with first chunk of old base */
3337 if (oldfirst
== m
->top
) {
3338 size_t tsize
= m
->topsize
+= qsize
;
3340 q
->head
= tsize
| PINUSE_BIT
;
3341 check_top_chunk(m
, q
);
3343 else if (oldfirst
== m
->dv
) {
3344 size_t dsize
= m
->dvsize
+= qsize
;
3346 set_size_and_pinuse_of_free_chunk(q
, dsize
);
3349 if (!cinuse(oldfirst
)) {
3350 size_t nsize
= chunksize(oldfirst
);
3351 unlink_chunk(m
, oldfirst
, nsize
);
3352 oldfirst
= chunk_plus_offset(oldfirst
, nsize
);
3355 set_free_with_pinuse(q
, qsize
, oldfirst
);
3356 insert_chunk(m
, q
, qsize
);
3357 check_free_chunk(m
, q
);
3360 check_malloced_chunk(m
, chunk2mem(p
), nb
);
3361 return chunk2mem(p
);
3365 /* Add a segment to hold a new noncontiguous region */
3366 static void add_segment(mstate m
, char* tbase
, size_t tsize
, flag_t mmapped
) {
3367 /* Determine locations and sizes of segment, fenceposts, old top */
3368 char* old_top
= (char*)m
->top
;
3369 msegmentptr oldsp
= segment_holding(m
, old_top
);
3370 char* old_end
= oldsp
->base
+ oldsp
->size
;
3371 size_t ssize
= pad_request(sizeof(struct malloc_segment
));
3372 char* rawsp
= old_end
- (ssize
+ FOUR_SIZE_T_SIZES
+ CHUNK_ALIGN_MASK
);
3373 size_t offset
= align_offset(chunk2mem(rawsp
));
3374 char* asp
= rawsp
+ offset
;
3375 char* csp
= (asp
< (old_top
+ MIN_CHUNK_SIZE
))? old_top
: asp
;
3376 mchunkptr sp
= (mchunkptr
)csp
;
3377 msegmentptr ss
= (msegmentptr
)(chunk2mem(sp
));
3378 mchunkptr tnext
= chunk_plus_offset(sp
, ssize
);
3379 mchunkptr p
= tnext
;
3382 /* reset top to new space */
3383 init_top(m
, (mchunkptr
)tbase
, tsize
- TOP_FOOT_SIZE
);
3385 /* Set up segment record */
3386 assert(is_aligned(ss
));
3387 set_size_and_pinuse_of_inuse_chunk(m
, sp
, ssize
);
3388 *ss
= m
->seg
; /* Push current record */
3389 m
->seg
.base
= tbase
;
3390 m
->seg
.size
= tsize
;
3391 (void)set_segment_flags(&m
->seg
, mmapped
);
3394 /* Insert trailing fenceposts */
3396 mchunkptr nextp
= chunk_plus_offset(p
, SIZE_T_SIZE
);
3397 p
->head
= FENCEPOST_HEAD
;
3399 if ((char*)(&(nextp
->head
)) < old_end
)
3404 assert(nfences
>= 2);
3406 /* Insert the rest of old top into a bin as an ordinary free chunk */
3407 if (csp
!= old_top
) {
3408 mchunkptr q
= (mchunkptr
)old_top
;
3409 size_t psize
= csp
- old_top
;
3410 mchunkptr tn
= chunk_plus_offset(q
, psize
);
3411 set_free_with_pinuse(q
, psize
, tn
);
3412 insert_chunk(m
, q
, psize
);
3415 check_top_chunk(m
, m
->top
);
3418 /* -------------------------- System allocation -------------------------- */
3420 /* Get memory from system using MORECORE or MMAP */
3421 static void* sys_alloc(mstate m
, size_t nb
) {
3422 char* tbase
= CMFAIL
;
3424 flag_t mmap_flag
= 0;
3428 /* Directly map large chunks */
3429 if (use_mmap(m
) && nb
>= mparams
.mmap_threshold
) {
3430 void* mem
= mmap_alloc(m
, nb
);
3436 Try getting memory in any of three ways (in most-preferred to
3437 least-preferred order):
3438 1. A call to MORECORE that can normally contiguously extend memory.
3439 (disabled if not MORECORE_CONTIGUOUS or not HAVE_MORECORE or
3440 or main space is mmapped or a previous contiguous call failed)
3441 2. A call to MMAP new space (disabled if not HAVE_MMAP).
3442 Note that under the default settings, if MORECORE is unable to
3443 fulfill a request, and HAVE_MMAP is true, then mmap is
3444 used as a noncontiguous system allocator. This is a useful backup
3445 strategy for systems with holes in address spaces -- in this case
3446 sbrk cannot contiguously expand the heap, but mmap may be able to
3448 3. A call to MORECORE that cannot usually contiguously extend memory.
3449 (disabled if not HAVE_MORECORE)
3452 if (MORECORE_CONTIGUOUS
&& !use_noncontiguous(m
)) {
3454 msegmentptr ss
= (m
->top
== 0)? 0 : segment_holding(m
, (char*)m
->top
);
3456 ACQUIRE_MORECORE_LOCK();
3458 if (ss
== 0) { /* First time through or recovery */
3459 char* base
= (char*)CALL_MORECORE(0);
3460 if (base
!= CMFAIL
) {
3461 asize
= granularity_align(nb
+ TOP_FOOT_SIZE
+ SIZE_T_ONE
);
3462 /* Adjust to end on a page boundary */
3463 if (!is_page_aligned(base
))
3464 asize
+= (page_align((size_t)base
) - (size_t)base
);
3465 /* Can't call MORECORE if size is negative when treated as signed */
3466 if (asize
< HALF_MAX_SIZE_T
&&
3467 (br
= (char*)(CALL_MORECORE(asize
))) == base
) {
3474 /* Subtract out existing available top space from MORECORE request. */
3475 asize
= granularity_align(nb
- m
->topsize
+ TOP_FOOT_SIZE
+ SIZE_T_ONE
);
3476 /* Use mem here only if it did continuously extend old space */
3477 if (asize
< HALF_MAX_SIZE_T
&&
3478 (br
= (char*)(CALL_MORECORE(asize
))) == ss
->base
+ss
->size
) {
3484 if (tbase
== CMFAIL
) { /* Cope with partial failure */
3485 if (br
!= CMFAIL
) { /* Try to use/extend the space we did get */
3486 if (asize
< HALF_MAX_SIZE_T
&&
3487 asize
< nb
+ TOP_FOOT_SIZE
+ SIZE_T_ONE
) {
3488 size_t esize
= granularity_align(nb
+ TOP_FOOT_SIZE
+ SIZE_T_ONE
- asize
);
3489 if (esize
< HALF_MAX_SIZE_T
) {
3490 char* end
= (char*)CALL_MORECORE(esize
);
3493 else { /* Can't use; try to release */
3494 (void)CALL_MORECORE(-asize
);
3500 if (br
!= CMFAIL
) { /* Use the space we did get */
3505 disable_contiguous(m
); /* Don't try contiguous path in the future */
3508 RELEASE_MORECORE_LOCK();
3511 if (HAVE_MMAP
&& tbase
== CMFAIL
) { /* Try MMAP */
3512 size_t req
= nb
+ TOP_FOOT_SIZE
+ SIZE_T_ONE
;
3513 size_t rsize
= granularity_align(req
);
3514 if (rsize
> nb
) { /* Fail if wraps around zero */
3515 char* mp
= (char*)(CALL_MMAP(rsize
));
3519 mmap_flag
= IS_MMAPPED_BIT
;
3524 if (HAVE_MORECORE
&& tbase
== CMFAIL
) { /* Try noncontiguous MORECORE */
3525 size_t asize
= granularity_align(nb
+ TOP_FOOT_SIZE
+ SIZE_T_ONE
);
3526 if (asize
< HALF_MAX_SIZE_T
) {
3529 ACQUIRE_MORECORE_LOCK();
3530 br
= (char*)(CALL_MORECORE(asize
));
3531 end
= (char*)(CALL_MORECORE(0));
3532 RELEASE_MORECORE_LOCK();
3533 if (br
!= CMFAIL
&& end
!= CMFAIL
&& br
< end
) {
3534 size_t ssize
= end
- br
;
3535 if (ssize
> nb
+ TOP_FOOT_SIZE
) {
3543 if (tbase
!= CMFAIL
) {
3545 if ((m
->footprint
+= tsize
) > m
->max_footprint
)
3546 m
->max_footprint
= m
->footprint
;
3548 if (!is_initialized(m
)) { /* first-time initialization */
3549 m
->seg
.base
= m
->least_addr
= tbase
;
3550 m
->seg
.size
= tsize
;
3551 (void)set_segment_flags(&m
->seg
, mmap_flag
);
3552 m
->magic
= mparams
.magic
;
3555 init_top(m
, (mchunkptr
)tbase
, tsize
- TOP_FOOT_SIZE
);
3557 /* Offset top by embedded malloc_state */
3558 mchunkptr mn
= next_chunk(mem2chunk(m
));
3559 init_top(m
, mn
, (size_t)((tbase
+ tsize
) - (char*)mn
) -TOP_FOOT_SIZE
);
3564 /* Try to merge with an existing segment */
3565 msegmentptr sp
= &m
->seg
;
3566 while (sp
!= 0 && tbase
!= sp
->base
+ sp
->size
)
3569 !is_extern_segment(sp
) &&
3570 check_segment_merge(sp
, tbase
, tsize
) &&
3571 (get_segment_flags(sp
) & IS_MMAPPED_BIT
) == mmap_flag
&&
3572 segment_holds(sp
, m
->top
)) { /* append */
3574 init_top(m
, m
->top
, m
->topsize
+ tsize
);
3577 if (tbase
< m
->least_addr
)
3578 m
->least_addr
= tbase
;
3580 while (sp
!= 0 && sp
->base
!= tbase
+ tsize
)
3583 !is_extern_segment(sp
) &&
3584 check_segment_merge(sp
, tbase
, tsize
) &&
3585 (get_segment_flags(sp
) & IS_MMAPPED_BIT
) == mmap_flag
) {
3586 char* oldbase
= sp
->base
;
3589 return prepend_alloc(m
, tbase
, oldbase
, nb
);
3592 add_segment(m
, tbase
, tsize
, mmap_flag
);
3596 if (nb
< m
->topsize
) { /* Allocate from new or extended top space */
3597 size_t rsize
= m
->topsize
-= nb
;
3598 mchunkptr p
= m
->top
;
3599 mchunkptr r
= m
->top
= chunk_plus_offset(p
, nb
);
3600 r
->head
= rsize
| PINUSE_BIT
;
3601 set_size_and_pinuse_of_inuse_chunk(m
, p
, nb
);
3602 check_top_chunk(m
, m
->top
);
3603 check_malloced_chunk(m
, chunk2mem(p
), nb
);
3604 return chunk2mem(p
);
3608 MALLOC_FAILURE_ACTION
;
3612 /* ----------------------- system deallocation -------------------------- */
3614 /* Unmap and unlink any mmapped segments that don't contain used chunks */
3615 static size_t release_unused_segments(mstate m
) {
3616 size_t released
= 0;
3617 msegmentptr pred
= &m
->seg
;
3618 msegmentptr sp
= pred
->next
;
3620 char* base
= sp
->base
;
3621 size_t size
= sp
->size
;
3622 msegmentptr next
= sp
->next
;
3623 if (is_mmapped_segment(sp
) && !is_extern_segment(sp
)) {
3624 mchunkptr p
= align_as_chunk(base
);
3625 size_t psize
= chunksize(p
);
3626 /* Can unmap if first chunk holds entire segment and not pinned */
3627 if (!cinuse(p
) && (char*)p
+ psize
>= base
+ size
- TOP_FOOT_SIZE
) {
3628 tchunkptr tp
= (tchunkptr
)p
;
3629 assert(segment_holds(sp
, (char*)sp
));
3635 unlink_large_chunk(m
, tp
);
3637 if (CALL_MUNMAP(base
, size
) == 0) {
3639 m
->footprint
-= size
;
3640 /* unlink obsoleted record */
3644 else { /* back out if cannot unmap */
3645 insert_large_chunk(m
, tp
, psize
);
3655 static int sys_trim(mstate m
, size_t pad
) {
3656 size_t released
= 0;
3657 if (pad
< MAX_REQUEST
&& is_initialized(m
)) {
3658 pad
+= TOP_FOOT_SIZE
; /* ensure enough room for segment overhead */
3660 if (m
->topsize
> pad
) {
3661 /* Shrink top space in granularity-size units, keeping at least one */
3662 size_t unit
= mparams
.granularity
;
3663 size_t extra
= ((m
->topsize
- pad
+ (unit
- SIZE_T_ONE
)) / unit
-
3665 msegmentptr sp
= segment_holding(m
, (char*)m
->top
);
3667 if (!is_extern_segment(sp
)) {
3668 if (is_mmapped_segment(sp
)) {
3670 sp
->size
>= extra
&&
3671 !has_segment_link(m
, sp
)) { /* can't shrink if pinned */
3672 size_t newsize
= sp
->size
- extra
;
3673 /* Prefer mremap, fall back to munmap */
3674 if ((CALL_MREMAP(sp
->base
, sp
->size
, newsize
, 0) != MFAIL
) ||
3675 (CALL_MUNMAP(sp
->base
+ newsize
, extra
) == 0)) {
3680 else if (HAVE_MORECORE
) {
3681 if (extra
>= HALF_MAX_SIZE_T
) /* Avoid wrapping negative */
3682 extra
= (HALF_MAX_SIZE_T
) + SIZE_T_ONE
- unit
;
3683 ACQUIRE_MORECORE_LOCK();
3685 /* Make sure end of memory is where we last set it. */
3686 char* old_br
= (char*)(CALL_MORECORE(0));
3687 if (old_br
== sp
->base
+ sp
->size
) {
3688 char* rel_br
= (char*)(CALL_MORECORE(-extra
));
3689 char* new_br
= (char*)(CALL_MORECORE(0));
3690 if (rel_br
!= CMFAIL
&& new_br
< old_br
)
3691 released
= old_br
- new_br
;
3694 RELEASE_MORECORE_LOCK();
3698 if (released
!= 0) {
3699 sp
->size
-= released
;
3700 m
->footprint
-= released
;
3701 init_top(m
, m
->top
, m
->topsize
- released
);
3702 check_top_chunk(m
, m
->top
);
3706 /* Unmap any unused mmapped segments */
3708 released
+= release_unused_segments(m
);
3710 /* On failure, disable autotrim to avoid repeated failed future calls */
3712 m
->trim_check
= MAX_SIZE_T
;
3715 return (released
!= 0)? 1 : 0;
3718 /* ---------------------------- malloc support --------------------------- */
3720 /* allocate a large request from the best fitting chunk in a treebin */
3721 static void* tmalloc_large(mstate m
, size_t nb
) {
3723 size_t rsize
= -nb
; /* Unsigned negation */
3726 compute_tree_index(nb
, idx
);
3728 if ((t
= *treebin_at(m
, idx
)) != 0) {
3729 /* Traverse tree for this bin looking for node with size == nb */
3730 size_t sizebits
= nb
<< leftshift_for_tree_index(idx
);
3731 tchunkptr rst
= 0; /* The deepest untaken right subtree */
3734 size_t trem
= chunksize(t
) - nb
;
3737 if ((rsize
= trem
) == 0)
3741 t
= t
->child
[(sizebits
>> (SIZE_T_BITSIZE
-SIZE_T_ONE
)) & 1];
3742 if (rt
!= 0 && rt
!= t
)
3745 t
= rst
; /* set t to least subtree holding sizes > nb */
3752 if (t
== 0 && v
== 0) { /* set t to root of next non-empty treebin */
3753 binmap_t leftbits
= left_bits(idx2bit(idx
)) & m
->treemap
;
3754 if (leftbits
!= 0) {
3756 binmap_t leastbit
= least_bit(leftbits
);
3757 compute_bit2idx(leastbit
, i
);
3758 t
= *treebin_at(m
, i
);
3762 while (t
!= 0) { /* find smallest of tree or subtree */
3763 size_t trem
= chunksize(t
) - nb
;
3768 t
= leftmost_child(t
);
3771 /* If dv is a better fit, return 0 so malloc will use it */
3772 if (v
!= 0 && rsize
< (size_t)(m
->dvsize
- nb
)) {
3773 if (RTCHECK(ok_address(m
, v
))) { /* split */
3774 mchunkptr r
= chunk_plus_offset(v
, nb
);
3775 assert(chunksize(v
) == rsize
+ nb
);
3776 if (RTCHECK(ok_next(v
, r
))) {
3777 unlink_large_chunk(m
, v
);
3778 if (rsize
< MIN_CHUNK_SIZE
)
3779 set_inuse_and_pinuse(m
, v
, (rsize
+ nb
));
3781 set_size_and_pinuse_of_inuse_chunk(m
, v
, nb
);
3782 set_size_and_pinuse_of_free_chunk(r
, rsize
);
3783 insert_chunk(m
, r
, rsize
);
3785 return chunk2mem(v
);
3788 CORRUPTION_ERROR_ACTION(m
);
3793 /* allocate a small request from the best fitting chunk in a treebin */
3794 static void* tmalloc_small(mstate m
, size_t nb
) {
3798 binmap_t leastbit
= least_bit(m
->treemap
);
3799 compute_bit2idx(leastbit
, i
);
3801 v
= t
= *treebin_at(m
, i
);
3802 rsize
= chunksize(t
) - nb
;
3804 while ((t
= leftmost_child(t
)) != 0) {
3805 size_t trem
= chunksize(t
) - nb
;
3812 if (RTCHECK(ok_address(m
, v
))) {
3813 mchunkptr r
= chunk_plus_offset(v
, nb
);
3814 assert(chunksize(v
) == rsize
+ nb
);
3815 if (RTCHECK(ok_next(v
, r
))) {
3816 unlink_large_chunk(m
, v
);
3817 if (rsize
< MIN_CHUNK_SIZE
)
3818 set_inuse_and_pinuse(m
, v
, (rsize
+ nb
));
3820 set_size_and_pinuse_of_inuse_chunk(m
, v
, nb
);
3821 set_size_and_pinuse_of_free_chunk(r
, rsize
);
3822 replace_dv(m
, r
, rsize
);
3824 return chunk2mem(v
);
3828 CORRUPTION_ERROR_ACTION(m
);
3832 /* --------------------------- realloc support --------------------------- */
3834 static void* internal_realloc(mstate m
, void* oldmem
, size_t bytes
) {
3835 if (bytes
>= MAX_REQUEST
) {
3836 MALLOC_FAILURE_ACTION
;
3839 if (!PREACTION(m
)) {
3840 mchunkptr oldp
= mem2chunk(oldmem
);
3841 size_t oldsize
= chunksize(oldp
);
3842 mchunkptr next
= chunk_plus_offset(oldp
, oldsize
);
3846 /* Try to either shrink or extend into top. Else malloc-copy-free */
3848 if (RTCHECK(ok_address(m
, oldp
) && ok_cinuse(oldp
) &&
3849 ok_next(oldp
, next
) && ok_pinuse(next
))) {
3850 size_t nb
= request2size(bytes
);
3851 if (is_mmapped(oldp
))
3852 newp
= mmap_resize(m
, oldp
, nb
);
3853 else if (oldsize
>= nb
) { /* already big enough */
3854 size_t rsize
= oldsize
- nb
;
3856 if (rsize
>= MIN_CHUNK_SIZE
) {
3857 mchunkptr remainder
= chunk_plus_offset(newp
, nb
);
3858 set_inuse(m
, newp
, nb
);
3859 set_inuse(m
, remainder
, rsize
);
3860 extra
= chunk2mem(remainder
);
3863 else if (next
== m
->top
&& oldsize
+ m
->topsize
> nb
) {
3864 /* Expand into top */
3865 size_t newsize
= oldsize
+ m
->topsize
;
3866 size_t newtopsize
= newsize
- nb
;
3867 mchunkptr newtop
= chunk_plus_offset(oldp
, nb
);
3868 set_inuse(m
, oldp
, nb
);
3869 newtop
->head
= newtopsize
|PINUSE_BIT
;
3871 m
->topsize
= newtopsize
;
3876 USAGE_ERROR_ACTION(m
, oldmem
);
3885 internal_free(m
, extra
);
3887 check_inuse_chunk(m
, newp
);
3888 return chunk2mem(newp
);
3891 void* newmem
= internal_malloc(m
, bytes
);
3893 size_t oc
= oldsize
- overhead_for(oldp
);
3894 memcpy(newmem
, oldmem
, (oc
< bytes
)? oc
: bytes
);
3895 internal_free(m
, oldmem
);
3903 /* --------------------------- memalign support -------------------------- */
3905 static void* internal_memalign(mstate m
, size_t alignment
, size_t bytes
) {
3906 if (alignment
<= MALLOC_ALIGNMENT
) /* Can just use malloc */
3907 return internal_malloc(m
, bytes
);
3908 if (alignment
< MIN_CHUNK_SIZE
) /* must be at least a minimum chunk size */
3909 alignment
= MIN_CHUNK_SIZE
;
3910 if ((alignment
& (alignment
-SIZE_T_ONE
)) != 0) {/* Ensure a power of 2 */
3911 size_t a
= MALLOC_ALIGNMENT
<< 1;
3912 while (a
< alignment
) a
<<= 1;
3916 if (bytes
>= MAX_REQUEST
- alignment
) {
3917 if (m
!= 0) { /* Test isn't needed but avoids compiler warning */
3918 MALLOC_FAILURE_ACTION
;
3922 size_t nb
= request2size(bytes
);
3923 size_t req
= nb
+ alignment
+ MIN_CHUNK_SIZE
- CHUNK_OVERHEAD
;
3924 char* mem
= (char*)internal_malloc(m
, req
);
3928 mchunkptr p
= mem2chunk(mem
);
3930 if (PREACTION(m
)) return 0;
3931 if ((((size_t)(mem
)) % alignment
) != 0) { /* misaligned */
3933 Find an aligned spot inside chunk. Since we need to give
3934 back leading space in a chunk of at least MIN_CHUNK_SIZE, if
3935 the first calculation places us at a spot with less than
3936 MIN_CHUNK_SIZE leader, we can move to the next aligned spot.
3937 We've allocated enough total room so that this is always
3940 char* br
= (char*)mem2chunk((size_t)(((size_t)(mem
+
3944 char* pos
= ((size_t)(br
- (char*)(p
)) >= MIN_CHUNK_SIZE
)?
3946 mchunkptr newp
= (mchunkptr
)pos
;
3947 size_t leadsize
= pos
- (char*)(p
);
3948 size_t newsize
= chunksize(p
) - leadsize
;
3950 if (is_mmapped(p
)) { /* For mmapped chunks, just adjust offset */
3951 newp
->prev_foot
= p
->prev_foot
+ leadsize
;
3952 newp
->head
= (newsize
|CINUSE_BIT
);
3954 else { /* Otherwise, give back leader, use the rest */
3955 set_inuse(m
, newp
, newsize
);
3956 set_inuse(m
, p
, leadsize
);
3957 leader
= chunk2mem(p
);
3962 /* Give back spare room at the end */
3963 if (!is_mmapped(p
)) {
3964 size_t size
= chunksize(p
);
3965 if (size
> nb
+ MIN_CHUNK_SIZE
) {
3966 size_t remainder_size
= size
- nb
;
3967 mchunkptr remainder
= chunk_plus_offset(p
, nb
);
3968 set_inuse(m
, p
, nb
);
3969 set_inuse(m
, remainder
, remainder_size
);
3970 trailer
= chunk2mem(remainder
);
3974 assert (chunksize(p
) >= nb
);
3975 assert((((size_t)(chunk2mem(p
))) % alignment
) == 0);
3976 check_inuse_chunk(m
, p
);
3979 internal_free(m
, leader
);
3982 internal_free(m
, trailer
);
3984 return chunk2mem(p
);
3990 /* ------------------------ comalloc/coalloc support --------------------- */
3992 static void** ialloc(mstate m
,
3998 This provides common support for independent_X routines, handling
3999 all of the combinations that can result.
4002 bit 0 set if all elements are same size (using sizes[0])
4003 bit 1 set if elements should be zeroed
4006 size_t element_size
; /* chunksize of each element, if all same */
4007 size_t contents_size
; /* total size of elements */
4008 size_t array_size
; /* request size of pointer array */
4009 void* mem
; /* malloced aggregate space */
4010 mchunkptr p
; /* corresponding chunk */
4011 size_t remainder_size
; /* remaining bytes while splitting */
4012 void** marray
; /* either "chunks" or malloced ptr array */
4013 mchunkptr array_chunk
; /* chunk for malloced ptr array */
4014 flag_t was_enabled
; /* to disable mmap */
4018 /* compute array length, if needed */
4020 if (n_elements
== 0)
4021 return chunks
; /* nothing to do */
4026 /* if empty req, must still return chunk representing empty array */
4027 if (n_elements
== 0)
4028 return (void**)internal_malloc(m
, 0);
4030 array_size
= request2size(n_elements
* (sizeof(void*)));
4033 /* compute total element size */
4034 if (opts
& 0x1) { /* all-same-size */
4035 element_size
= request2size(*sizes
);
4036 contents_size
= n_elements
* element_size
;
4038 else { /* add up all the sizes */
4041 for (i
= 0; i
!= n_elements
; ++i
)
4042 contents_size
+= request2size(sizes
[i
]);
4045 size
= contents_size
+ array_size
;
4048 Allocate the aggregate chunk. First disable direct-mmapping so
4049 malloc won't use it, since we would not be able to later
4050 free/realloc space internal to a segregated mmap region.
4052 was_enabled
= use_mmap(m
);
4054 mem
= internal_malloc(m
, size
- CHUNK_OVERHEAD
);
4060 if (PREACTION(m
)) return 0;
4062 remainder_size
= chunksize(p
);
4064 assert(!is_mmapped(p
));
4066 if (opts
& 0x2) { /* optionally clear the elements */
4067 memset((size_t*)mem
, 0, remainder_size
- SIZE_T_SIZE
- array_size
);
4070 /* If not provided, allocate the pointer array as final part of chunk */
4072 size_t array_chunk_size
;
4073 array_chunk
= chunk_plus_offset(p
, contents_size
);
4074 array_chunk_size
= remainder_size
- contents_size
;
4075 marray
= (void**) (chunk2mem(array_chunk
));
4076 set_size_and_pinuse_of_inuse_chunk(m
, array_chunk
, array_chunk_size
);
4077 remainder_size
= contents_size
;
4080 /* split out elements */
4081 for (i
= 0; ; ++i
) {
4082 marray
[i
] = chunk2mem(p
);
4083 if (i
!= n_elements
-1) {
4084 if (element_size
!= 0)
4085 size
= element_size
;
4087 size
= request2size(sizes
[i
]);
4088 remainder_size
-= size
;
4089 set_size_and_pinuse_of_inuse_chunk(m
, p
, size
);
4090 p
= chunk_plus_offset(p
, size
);
4092 else { /* the final element absorbs any overallocation slop */
4093 set_size_and_pinuse_of_inuse_chunk(m
, p
, remainder_size
);
4099 if (marray
!= chunks
) {
4100 /* final element must have exactly exhausted chunk */
4101 if (element_size
!= 0) {
4102 assert(remainder_size
== element_size
);
4105 assert(remainder_size
== request2size(sizes
[i
]));
4107 check_inuse_chunk(m
, mem2chunk(marray
));
4109 for (i
= 0; i
!= n_elements
; ++i
)
4110 check_inuse_chunk(m
, mem2chunk(marray
[i
]));
4119 /* -------------------------- public routines ---------------------------- */
4123 void* dlmalloc(size_t bytes
) {
4126 If a small request (< 256 bytes minus per-chunk overhead):
4127 1. If one exists, use a remainderless chunk in associated smallbin.
4128 (Remainderless means that there are too few excess bytes to
4129 represent as a chunk.)
4130 2. If it is big enough, use the dv chunk, which is normally the
4131 chunk adjacent to the one used for the most recent small request.
4132 3. If one exists, split the smallest available chunk in a bin,
4133 saving remainder in dv.
4134 4. If it is big enough, use the top chunk.
4135 5. If available, get memory from system and use it
4136 Otherwise, for a large request:
4137 1. Find the smallest available binned chunk that fits, and use it
4138 if it is better fitting than dv chunk, splitting if necessary.
4139 2. If better fitting than any binned chunk, use the dv chunk.
4140 3. If it is big enough, use the top chunk.
4141 4. If request size >= mmap threshold, try to directly mmap this chunk.
4142 5. If available, get memory from system and use it
4144 The ugly goto's here ensure that postaction occurs along all paths.
4147 if (!PREACTION(gm
)) {
4150 if (bytes
<= MAX_SMALL_REQUEST
) {
4153 nb
= (bytes
< MIN_REQUEST
)? MIN_CHUNK_SIZE
: pad_request(bytes
);
4154 idx
= small_index(nb
);
4155 smallbits
= gm
->smallmap
>> idx
;
4157 if ((smallbits
& 0x3U
) != 0) { /* Remainderless fit to a smallbin. */
4159 idx
+= ~smallbits
& 1; /* Uses next bin if idx empty */
4160 b
= smallbin_at(gm
, idx
);
4162 assert(chunksize(p
) == small_index2size(idx
));
4163 unlink_first_small_chunk(gm
, b
, p
, idx
);
4164 set_inuse_and_pinuse(gm
, p
, small_index2size(idx
));
4166 check_malloced_chunk(gm
, mem
, nb
);
4170 else if (nb
> gm
->dvsize
) {
4171 if (smallbits
!= 0) { /* Use chunk in next nonempty smallbin */
4175 binmap_t leftbits
= (smallbits
<< idx
) & left_bits(idx2bit(idx
));
4176 binmap_t leastbit
= least_bit(leftbits
);
4177 compute_bit2idx(leastbit
, i
);
4178 b
= smallbin_at(gm
, i
);
4180 assert(chunksize(p
) == small_index2size(i
));
4181 unlink_first_small_chunk(gm
, b
, p
, i
);
4182 rsize
= small_index2size(i
) - nb
;
4183 /* Fit here cannot be remainderless if 4byte sizes */
4184 if (SIZE_T_SIZE
!= 4 && rsize
< MIN_CHUNK_SIZE
)
4185 set_inuse_and_pinuse(gm
, p
, small_index2size(i
));
4187 set_size_and_pinuse_of_inuse_chunk(gm
, p
, nb
);
4188 r
= chunk_plus_offset(p
, nb
);
4189 set_size_and_pinuse_of_free_chunk(r
, rsize
);
4190 replace_dv(gm
, r
, rsize
);
4193 check_malloced_chunk(gm
, mem
, nb
);
4197 else if (gm
->treemap
!= 0 && (mem
= tmalloc_small(gm
, nb
)) != 0) {
4198 check_malloced_chunk(gm
, mem
, nb
);
4203 else if (bytes
>= MAX_REQUEST
)
4204 nb
= MAX_SIZE_T
; /* Too big to allocate. Force failure (in sys alloc) */
4206 nb
= pad_request(bytes
);
4207 if (gm
->treemap
!= 0 && (mem
= tmalloc_large(gm
, nb
)) != 0) {
4208 check_malloced_chunk(gm
, mem
, nb
);
4213 if (nb
<= gm
->dvsize
) {
4214 size_t rsize
= gm
->dvsize
- nb
;
4215 mchunkptr p
= gm
->dv
;
4216 if (rsize
>= MIN_CHUNK_SIZE
) { /* split dv */
4217 mchunkptr r
= gm
->dv
= chunk_plus_offset(p
, nb
);
4219 set_size_and_pinuse_of_free_chunk(r
, rsize
);
4220 set_size_and_pinuse_of_inuse_chunk(gm
, p
, nb
);
4222 else { /* exhaust dv */
4223 size_t dvs
= gm
->dvsize
;
4226 set_inuse_and_pinuse(gm
, p
, dvs
);
4229 check_malloced_chunk(gm
, mem
, nb
);
4233 else if (nb
< gm
->topsize
) { /* Split top */
4234 size_t rsize
= gm
->topsize
-= nb
;
4235 mchunkptr p
= gm
->top
;
4236 mchunkptr r
= gm
->top
= chunk_plus_offset(p
, nb
);
4237 r
->head
= rsize
| PINUSE_BIT
;
4238 set_size_and_pinuse_of_inuse_chunk(gm
, p
, nb
);
4240 check_top_chunk(gm
, gm
->top
);
4241 check_malloced_chunk(gm
, mem
, nb
);
4245 mem
= sys_alloc(gm
, nb
);
4255 void dlfree(void* mem
) {
4257 Consolidate freed chunks with preceding or succeeding bordering
4258 free chunks, if they exist, and then place in a bin. Intermixed
4259 with special cases for top, dv, mmapped chunks, and usage errors.
4263 mchunkptr p
= mem2chunk(mem
);
4265 mstate fm
= get_mstate_for(p
);
4266 if (!ok_magic(fm
)) {
4267 USAGE_ERROR_ACTION(fm
, p
);
4272 #endif /* FOOTERS */
4273 if (!PREACTION(fm
)) {
4274 check_inuse_chunk(fm
, p
);
4275 if (RTCHECK(ok_address(fm
, p
) && ok_cinuse(p
))) {
4276 size_t psize
= chunksize(p
);
4277 mchunkptr next
= chunk_plus_offset(p
, psize
);
4279 size_t prevsize
= p
->prev_foot
;
4280 if ((prevsize
& IS_MMAPPED_BIT
) != 0) {
4281 prevsize
&= ~IS_MMAPPED_BIT
;
4282 psize
+= prevsize
+ MMAP_FOOT_PAD
;
4283 if (CALL_MUNMAP((char*)p
- prevsize
, psize
) == 0)
4284 fm
->footprint
-= psize
;
4288 mchunkptr prev
= chunk_minus_offset(p
, prevsize
);
4291 if (RTCHECK(ok_address(fm
, prev
))) { /* consolidate backward */
4293 unlink_chunk(fm
, p
, prevsize
);
4295 else if ((next
->head
& INUSE_BITS
) == INUSE_BITS
) {
4297 set_free_with_pinuse(p
, psize
, next
);
4306 if (RTCHECK(ok_next(p
, next
) && ok_pinuse(next
))) {
4307 if (!cinuse(next
)) { /* consolidate forward */
4308 if (next
== fm
->top
) {
4309 size_t tsize
= fm
->topsize
+= psize
;
4311 p
->head
= tsize
| PINUSE_BIT
;
4316 if (should_trim(fm
, tsize
))
4320 else if (next
== fm
->dv
) {
4321 size_t dsize
= fm
->dvsize
+= psize
;
4323 set_size_and_pinuse_of_free_chunk(p
, dsize
);
4327 size_t nsize
= chunksize(next
);
4329 unlink_chunk(fm
, next
, nsize
);
4330 set_size_and_pinuse_of_free_chunk(p
, psize
);
4338 set_free_with_pinuse(p
, psize
, next
);
4339 insert_chunk(fm
, p
, psize
);
4340 check_free_chunk(fm
, p
);
4345 USAGE_ERROR_ACTION(fm
, p
);
4352 #endif /* FOOTERS */
4355 void* dlcalloc(size_t n_elements
, size_t elem_size
) {
4358 if (n_elements
!= 0) {
4359 req
= n_elements
* elem_size
;
4360 if (((n_elements
| elem_size
) & ~(size_t)0xffff) &&
4361 (req
/ n_elements
!= elem_size
))
4362 req
= MAX_SIZE_T
; /* force downstream failure on overflow */
4364 mem
= dlmalloc(req
);
4365 if (mem
!= 0 && calloc_must_clear(mem2chunk(mem
)))
4366 memset(mem
, 0, req
);
4370 void* dlrealloc(void* oldmem
, size_t bytes
) {
4372 return dlmalloc(bytes
);
4373 #ifdef REALLOC_ZERO_BYTES_FREES
4378 #endif /* REALLOC_ZERO_BYTES_FREES */
4383 mstate m
= get_mstate_for(mem2chunk(oldmem
));
4385 USAGE_ERROR_ACTION(m
, oldmem
);
4388 #endif /* FOOTERS */
4389 return internal_realloc(m
, oldmem
, bytes
);
4393 void* dlmemalign(size_t alignment
, size_t bytes
) {
4394 return internal_memalign(gm
, alignment
, bytes
);
4397 void** dlindependent_calloc(size_t n_elements
, size_t elem_size
,
4399 size_t sz
= elem_size
; /* serves as 1-element array */
4400 return ialloc(gm
, n_elements
, &sz
, 3, chunks
);
4403 void** dlindependent_comalloc(size_t n_elements
, size_t sizes
[],
4405 return ialloc(gm
, n_elements
, sizes
, 0, chunks
);
4408 void* dlvalloc(size_t bytes
) {
4411 pagesz
= mparams
.page_size
;
4412 return dlmemalign(pagesz
, bytes
);
4415 void* dlpvalloc(size_t bytes
) {
4418 pagesz
= mparams
.page_size
;
4419 return dlmemalign(pagesz
, (bytes
+ pagesz
- SIZE_T_ONE
) & ~(pagesz
- SIZE_T_ONE
));
4422 int dlmalloc_trim(size_t pad
) {
4424 if (!PREACTION(gm
)) {
4425 result
= sys_trim(gm
, pad
);
4431 size_t dlmalloc_footprint(void) {
4432 return gm
->footprint
;
4435 size_t dlmalloc_max_footprint(void) {
4436 return gm
->max_footprint
;
4440 struct mallinfo
dlmallinfo(void) {
4441 return internal_mallinfo(gm
);
4443 #endif /* NO_MALLINFO */
4445 void dlmalloc_stats() {
4446 internal_malloc_stats(gm
);
4449 size_t dlmalloc_usable_size(void* mem
) {
4451 mchunkptr p
= mem2chunk(mem
);
4453 return chunksize(p
) - overhead_for(p
);
4458 int dlmallopt(int param_number
, int value
) {
4459 return change_mparam(param_number
, value
);
4462 #endif /* !ONLY_MSPACES */
4464 /* ----------------------------- user mspaces ---------------------------- */
4468 static mstate
init_user_mstate(char* tbase
, size_t tsize
) {
4469 size_t msize
= pad_request(sizeof(struct malloc_state
));
4471 mchunkptr msp
= align_as_chunk(tbase
);
4472 mstate m
= (mstate
)(chunk2mem(msp
));
4473 memset(m
, 0, msize
);
4474 INITIAL_LOCK(&m
->mutex
);
4475 msp
->head
= (msize
|PINUSE_BIT
|CINUSE_BIT
);
4476 m
->seg
.base
= m
->least_addr
= tbase
;
4477 m
->seg
.size
= m
->footprint
= m
->max_footprint
= tsize
;
4478 m
->magic
= mparams
.magic
;
4479 m
->mflags
= mparams
.default_mflags
;
4480 disable_contiguous(m
);
4482 mn
= next_chunk(mem2chunk(m
));
4483 init_top(m
, mn
, (size_t)((tbase
+ tsize
) - (char*)mn
) - TOP_FOOT_SIZE
);
4484 check_top_chunk(m
, m
->top
);
4488 mspace
create_mspace(size_t capacity
, int locked
) {
4490 size_t msize
= pad_request(sizeof(struct malloc_state
));
4491 init_mparams(); /* Ensure pagesize etc initialized */
4493 if (capacity
< (size_t) -(msize
+ TOP_FOOT_SIZE
+ mparams
.page_size
)) {
4494 size_t rs
= ((capacity
== 0)? mparams
.granularity
:
4495 (capacity
+ TOP_FOOT_SIZE
+ msize
));
4496 size_t tsize
= granularity_align(rs
);
4497 char* tbase
= (char*)(CALL_MMAP(tsize
));
4498 if (tbase
!= CMFAIL
) {
4499 m
= init_user_mstate(tbase
, tsize
);
4500 set_segment_flags(&m
->seg
, IS_MMAPPED_BIT
);
4501 set_lock(m
, locked
);
4507 mspace
create_mspace_with_base(void* base
, size_t capacity
, int locked
) {
4509 size_t msize
= pad_request(sizeof(struct malloc_state
));
4510 init_mparams(); /* Ensure pagesize etc initialized */
4512 if (capacity
> msize
+ TOP_FOOT_SIZE
&&
4513 capacity
< (size_t) -(msize
+ TOP_FOOT_SIZE
+ mparams
.page_size
)) {
4514 m
= init_user_mstate((char*)base
, capacity
);
4515 set_segment_flags(&m
->seg
, EXTERN_BIT
);
4516 set_lock(m
, locked
);
4521 size_t destroy_mspace(mspace msp
) {
4523 mstate ms
= (mstate
)msp
;
4525 msegmentptr sp
= &ms
->seg
;
4527 char* base
= sp
->base
;
4528 size_t size
= sp
->size
;
4529 flag_t flag
= get_segment_flags(sp
);
4531 if ((flag
& IS_MMAPPED_BIT
) && !(flag
& EXTERN_BIT
) &&
4532 CALL_MUNMAP(base
, size
) == 0)
4537 USAGE_ERROR_ACTION(ms
,ms
);
4543 mspace versions of routines are near-clones of the global
4544 versions. This is not so nice but better than the alternatives.
4548 void* mspace_malloc(mspace msp
, size_t bytes
) {
4549 mstate ms
= (mstate
)msp
;
4550 if (!ok_magic(ms
)) {
4551 USAGE_ERROR_ACTION(ms
,ms
);
4554 if (!PREACTION(ms
)) {
4557 if (bytes
<= MAX_SMALL_REQUEST
) {
4560 nb
= (bytes
< MIN_REQUEST
)? MIN_CHUNK_SIZE
: pad_request(bytes
);
4561 idx
= small_index(nb
);
4562 smallbits
= ms
->smallmap
>> idx
;
4564 if ((smallbits
& 0x3U
) != 0) { /* Remainderless fit to a smallbin. */
4566 idx
+= ~smallbits
& 1; /* Uses next bin if idx empty */
4567 b
= smallbin_at(ms
, idx
);
4569 assert(chunksize(p
) == small_index2size(idx
));
4570 unlink_first_small_chunk(ms
, b
, p
, idx
);
4571 set_inuse_and_pinuse(ms
, p
, small_index2size(idx
));
4573 check_malloced_chunk(ms
, mem
, nb
);
4577 else if (nb
> ms
->dvsize
) {
4578 if (smallbits
!= 0) { /* Use chunk in next nonempty smallbin */
4582 binmap_t leftbits
= (smallbits
<< idx
) & left_bits(idx2bit(idx
));
4583 binmap_t leastbit
= least_bit(leftbits
);
4584 compute_bit2idx(leastbit
, i
);
4585 b
= smallbin_at(ms
, i
);
4587 assert(chunksize(p
) == small_index2size(i
));
4588 unlink_first_small_chunk(ms
, b
, p
, i
);
4589 rsize
= small_index2size(i
) - nb
;
4590 /* Fit here cannot be remainderless if 4byte sizes */
4591 if (SIZE_T_SIZE
!= 4 && rsize
< MIN_CHUNK_SIZE
)
4592 set_inuse_and_pinuse(ms
, p
, small_index2size(i
));
4594 set_size_and_pinuse_of_inuse_chunk(ms
, p
, nb
);
4595 r
= chunk_plus_offset(p
, nb
);
4596 set_size_and_pinuse_of_free_chunk(r
, rsize
);
4597 replace_dv(ms
, r
, rsize
);
4600 check_malloced_chunk(ms
, mem
, nb
);
4604 else if (ms
->treemap
!= 0 && (mem
= tmalloc_small(ms
, nb
)) != 0) {
4605 check_malloced_chunk(ms
, mem
, nb
);
4610 else if (bytes
>= MAX_REQUEST
)
4611 nb
= MAX_SIZE_T
; /* Too big to allocate. Force failure (in sys alloc) */
4613 nb
= pad_request(bytes
);
4614 if (ms
->treemap
!= 0 && (mem
= tmalloc_large(ms
, nb
)) != 0) {
4615 check_malloced_chunk(ms
, mem
, nb
);
4620 if (nb
<= ms
->dvsize
) {
4621 size_t rsize
= ms
->dvsize
- nb
;
4622 mchunkptr p
= ms
->dv
;
4623 if (rsize
>= MIN_CHUNK_SIZE
) { /* split dv */
4624 mchunkptr r
= ms
->dv
= chunk_plus_offset(p
, nb
);
4626 set_size_and_pinuse_of_free_chunk(r
, rsize
);
4627 set_size_and_pinuse_of_inuse_chunk(ms
, p
, nb
);
4629 else { /* exhaust dv */
4630 size_t dvs
= ms
->dvsize
;
4633 set_inuse_and_pinuse(ms
, p
, dvs
);
4636 check_malloced_chunk(ms
, mem
, nb
);
4640 else if (nb
< ms
->topsize
) { /* Split top */
4641 size_t rsize
= ms
->topsize
-= nb
;
4642 mchunkptr p
= ms
->top
;
4643 mchunkptr r
= ms
->top
= chunk_plus_offset(p
, nb
);
4644 r
->head
= rsize
| PINUSE_BIT
;
4645 set_size_and_pinuse_of_inuse_chunk(ms
, p
, nb
);
4647 check_top_chunk(ms
, ms
->top
);
4648 check_malloced_chunk(ms
, mem
, nb
);
4652 mem
= sys_alloc(ms
, nb
);
4662 void mspace_free(mspace msp
, void* mem
) {
4664 mchunkptr p
= mem2chunk(mem
);
4666 mstate fm
= get_mstate_for(p
);
4668 mstate fm
= (mstate
)msp
;
4669 #endif /* FOOTERS */
4670 if (!ok_magic(fm
)) {
4671 USAGE_ERROR_ACTION(fm
, p
);
4674 if (!PREACTION(fm
)) {
4675 check_inuse_chunk(fm
, p
);
4676 if (RTCHECK(ok_address(fm
, p
) && ok_cinuse(p
))) {
4677 size_t psize
= chunksize(p
);
4678 mchunkptr next
= chunk_plus_offset(p
, psize
);
4680 size_t prevsize
= p
->prev_foot
;
4681 if ((prevsize
& IS_MMAPPED_BIT
) != 0) {
4682 prevsize
&= ~IS_MMAPPED_BIT
;
4683 psize
+= prevsize
+ MMAP_FOOT_PAD
;
4684 if (CALL_MUNMAP((char*)p
- prevsize
, psize
) == 0)
4685 fm
->footprint
-= psize
;
4689 mchunkptr prev
= chunk_minus_offset(p
, prevsize
);
4692 if (RTCHECK(ok_address(fm
, prev
))) { /* consolidate backward */
4694 unlink_chunk(fm
, p
, prevsize
);
4696 else if ((next
->head
& INUSE_BITS
) == INUSE_BITS
) {
4698 set_free_with_pinuse(p
, psize
, next
);
4707 if (RTCHECK(ok_next(p
, next
) && ok_pinuse(next
))) {
4708 if (!cinuse(next
)) { /* consolidate forward */
4709 if (next
== fm
->top
) {
4710 size_t tsize
= fm
->topsize
+= psize
;
4712 p
->head
= tsize
| PINUSE_BIT
;
4717 if (should_trim(fm
, tsize
))
4721 else if (next
== fm
->dv
) {
4722 size_t dsize
= fm
->dvsize
+= psize
;
4724 set_size_and_pinuse_of_free_chunk(p
, dsize
);
4728 size_t nsize
= chunksize(next
);
4730 unlink_chunk(fm
, next
, nsize
);
4731 set_size_and_pinuse_of_free_chunk(p
, psize
);
4739 set_free_with_pinuse(p
, psize
, next
);
4740 insert_chunk(fm
, p
, psize
);
4741 check_free_chunk(fm
, p
);
4746 USAGE_ERROR_ACTION(fm
, p
);
4753 void* mspace_calloc(mspace msp
, size_t n_elements
, size_t elem_size
) {
4756 mstate ms
= (mstate
)msp
;
4757 if (!ok_magic(ms
)) {
4758 USAGE_ERROR_ACTION(ms
,ms
);
4761 if (n_elements
!= 0) {
4762 req
= n_elements
* elem_size
;
4763 if (((n_elements
| elem_size
) & ~(size_t)0xffff) &&
4764 (req
/ n_elements
!= elem_size
))
4765 req
= MAX_SIZE_T
; /* force downstream failure on overflow */
4767 mem
= internal_malloc(ms
, req
);
4768 if (mem
!= 0 && calloc_must_clear(mem2chunk(mem
)))
4769 memset(mem
, 0, req
);
4773 void* mspace_realloc(mspace msp
, void* oldmem
, size_t bytes
) {
4775 return mspace_malloc(msp
, bytes
);
4776 #ifdef REALLOC_ZERO_BYTES_FREES
4778 mspace_free(msp
, oldmem
);
4781 #endif /* REALLOC_ZERO_BYTES_FREES */
4784 mchunkptr p
= mem2chunk(oldmem
);
4785 mstate ms
= get_mstate_for(p
);
4787 mstate ms
= (mstate
)msp
;
4788 #endif /* FOOTERS */
4789 if (!ok_magic(ms
)) {
4790 USAGE_ERROR_ACTION(ms
,ms
);
4793 return internal_realloc(ms
, oldmem
, bytes
);
4797 void* mspace_memalign(mspace msp
, size_t alignment
, size_t bytes
) {
4798 mstate ms
= (mstate
)msp
;
4799 if (!ok_magic(ms
)) {
4800 USAGE_ERROR_ACTION(ms
,ms
);
4803 return internal_memalign(ms
, alignment
, bytes
);
4806 void** mspace_independent_calloc(mspace msp
, size_t n_elements
,
4807 size_t elem_size
, void* chunks
[]) {
4808 size_t sz
= elem_size
; /* serves as 1-element array */
4809 mstate ms
= (mstate
)msp
;
4810 if (!ok_magic(ms
)) {
4811 USAGE_ERROR_ACTION(ms
,ms
);
4814 return ialloc(ms
, n_elements
, &sz
, 3, chunks
);
4817 void** mspace_independent_comalloc(mspace msp
, size_t n_elements
,
4818 size_t sizes
[], void* chunks
[]) {
4819 mstate ms
= (mstate
)msp
;
4820 if (!ok_magic(ms
)) {
4821 USAGE_ERROR_ACTION(ms
,ms
);
4824 return ialloc(ms
, n_elements
, sizes
, 0, chunks
);
4827 int mspace_trim(mspace msp
, size_t pad
) {
4829 mstate ms
= (mstate
)msp
;
4831 if (!PREACTION(ms
)) {
4832 result
= sys_trim(ms
, pad
);
4837 USAGE_ERROR_ACTION(ms
,ms
);
4842 void mspace_malloc_stats(mspace msp
) {
4843 mstate ms
= (mstate
)msp
;
4845 internal_malloc_stats(ms
);
4848 USAGE_ERROR_ACTION(ms
,ms
);
4852 size_t mspace_footprint(mspace msp
) {
4854 mstate ms
= (mstate
)msp
;
4856 result
= ms
->footprint
;
4858 USAGE_ERROR_ACTION(ms
,ms
);
4863 size_t mspace_max_footprint(mspace msp
) {
4865 mstate ms
= (mstate
)msp
;
4867 result
= ms
->max_footprint
;
4869 USAGE_ERROR_ACTION(ms
,ms
);
4875 struct mallinfo
mspace_mallinfo(mspace msp
) {
4876 mstate ms
= (mstate
)msp
;
4877 if (!ok_magic(ms
)) {
4878 USAGE_ERROR_ACTION(ms
,ms
);
4880 return internal_mallinfo(ms
);
4882 #endif /* NO_MALLINFO */
4884 int mspace_mallopt(int param_number
, int value
) {
4885 return change_mparam(param_number
, value
);
4888 #endif /* MSPACES */
4890 /* -------------------- Alternative MORECORE functions ------------------- */
4893 Guidelines for creating a custom version of MORECORE:
4895 * For best performance, MORECORE should allocate in multiples of pagesize.
4896 * MORECORE may allocate more memory than requested. (Or even less,
4897 but this will usually result in a malloc failure.)
4898 * MORECORE must not allocate memory when given argument zero, but
4899 instead return one past the end address of memory from previous
4901 * For best performance, consecutive calls to MORECORE with positive
4902 arguments should return increasing addresses, indicating that
4903 space has been contiguously extended.
4904 * Even though consecutive calls to MORECORE need not return contiguous
4905 addresses, it must be OK for malloc'ed chunks to span multiple
4906 regions in those cases where they do happen to be contiguous.
4907 * MORECORE need not handle negative arguments -- it may instead
4908 just return MFAIL when given negative arguments.
4909 Negative arguments are always multiples of pagesize. MORECORE
4910 must not misinterpret negative args as large positive unsigned
4911 args. You can suppress all such calls from even occurring by defining
4912 MORECORE_CANNOT_TRIM,
4914 As an example alternative MORECORE, here is a custom allocator
4915 kindly contributed for pre-OSX macOS. It uses virtually but not
4916 necessarily physically contiguous non-paged memory (locked in,
4917 present and won't get swapped out). You can use it by uncommenting
4918 this section, adding some #includes, and setting up the appropriate
4921 #define MORECORE osMoreCore
4923 There is also a shutdown routine that should somehow be called for
4924 cleanup upon program exit.
4926 #define MAX_POOL_ENTRIES 100
4927 #define MINIMUM_MORECORE_SIZE (64 * 1024U)
4928 static int next_os_pool;
4929 void *our_os_pools[MAX_POOL_ENTRIES];
4931 void *osMoreCore(int size)
4934 static void *sbrk_top = 0;
4938 if (size < MINIMUM_MORECORE_SIZE)
4939 size = MINIMUM_MORECORE_SIZE;
4940 if (CurrentExecutionLevel() == kTaskLevel)
4941 ptr = PoolAllocateResident(size + RM_PAGE_SIZE, 0);
4944 return (void *) MFAIL;
4946 // save ptrs so they can be freed during cleanup
4947 our_os_pools[next_os_pool] = ptr;
4949 ptr = (void *) ((((size_t) ptr) + RM_PAGE_MASK) & ~RM_PAGE_MASK);
4950 sbrk_top = (char *) ptr + size;
4955 // we don't currently support shrink behavior
4956 return (void *) MFAIL;
4964 // cleanup any allocated memory pools
4965 // called as last thing before shutting down driver
4967 void osCleanupMem(void)
4971 for (ptr = our_os_pools; ptr < &our_os_pools[MAX_POOL_ENTRIES]; ptr++)
4974 PoolDeallocate(*ptr);
4982 /* -----------------------------------------------------------------------
4984 V2.8.3 Thu Sep 22 11:16:32 2005 Doug Lea (dl at gee)
4985 * Add max_footprint functions
4986 * Ensure all appropriate literals are size_t
4987 * Fix conditional compilation problem for some #define settings
4988 * Avoid concatenating segments with the one provided
4989 in create_mspace_with_base
4990 * Rename some variables to avoid compiler shadowing warnings
4991 * Use explicit lock initialization.
4992 * Better handling of sbrk interference.
4993 * Simplify and fix segment insertion, trimming and mspace_destroy
4994 * Reinstate REALLOC_ZERO_BYTES_FREES option from 2.7.x
4995 * Thanks especially to Dennis Flanagan for help on these.
4997 V2.8.2 Sun Jun 12 16:01:10 2005 Doug Lea (dl at gee)
4998 * Fix memalign brace error.
5000 V2.8.1 Wed Jun 8 16:11:46 2005 Doug Lea (dl at gee)
5001 * Fix improper #endif nesting in C++
5002 * Add explicit casts needed for C++
5004 V2.8.0 Mon May 30 14:09:02 2005 Doug Lea (dl at gee)
5005 * Use trees for large bins
5007 * Use segments to unify sbrk-based and mmap-based system allocation,
5008 removing need for emulation on most platforms without sbrk.
5009 * Default safety checks
5010 * Optional footer checks. Thanks to William Robertson for the idea.
5011 * Internal code refactoring
5012 * Incorporate suggestions and platform-specific changes.
5013 Thanks to Dennis Flanagan, Colin Plumb, Niall Douglas,
5014 Aaron Bachmann, Emery Berger, and others.
5015 * Speed up non-fastbin processing enough to remove fastbins.
5016 * Remove useless cfree() to avoid conflicts with other apps.
5017 * Remove internal memcpy, memset. Compilers handle builtins better.
5018 * Remove some options that no one ever used and rename others.
5020 V2.7.2 Sat Aug 17 09:07:30 2002 Doug Lea (dl at gee)
5021 * Fix malloc_state bitmap array misdeclaration
5023 V2.7.1 Thu Jul 25 10:58:03 2002 Doug Lea (dl at gee)
5024 * Allow tuning of FIRST_SORTED_BIN_SIZE
5025 * Use PTR_UINT as type for all ptr->int casts. Thanks to John Belmonte.
5026 * Better detection and support for non-contiguousness of MORECORE.
5027 Thanks to Andreas Mueller, Conal Walsh, and Wolfram Gloger
5028 * Bypass most of malloc if no frees. Thanks To Emery Berger.
5029 * Fix freeing of old top non-contiguous chunk im sysmalloc.
5030 * Raised default trim and map thresholds to 256K.
5031 * Fix mmap-related #defines. Thanks to Lubos Lunak.
5032 * Fix copy macros; added LACKS_FCNTL_H. Thanks to Neal Walfield.
5033 * Branch-free bin calculation
5034 * Default trim and mmap thresholds now 256K.
5036 V2.7.0 Sun Mar 11 14:14:06 2001 Doug Lea (dl at gee)
5037 * Introduce independent_comalloc and independent_calloc.
5038 Thanks to Michael Pachos for motivation and help.
5039 * Make optional .h file available
5040 * Allow > 2GB requests on 32bit systems.
5041 * new WIN32 sbrk, mmap, munmap, lock code from <Walter@GeNeSys-e.de>.
5042 Thanks also to Andreas Mueller <a.mueller at paradatec.de>,
5044 * Allow override of MALLOC_ALIGNMENT (Thanks to Ruud Waij for
5046 * memalign: check alignment arg
5047 * realloc: don't try to shift chunks backwards, since this
5048 leads to more fragmentation in some programs and doesn't
5049 seem to help in any others.
5050 * Collect all cases in malloc requiring system memory into sysmalloc
5051 * Use mmap as backup to sbrk
5052 * Place all internal state in malloc_state
5053 * Introduce fastbins (although similar to 2.5.1)
5054 * Many minor tunings and cosmetic improvements
5055 * Introduce USE_PUBLIC_MALLOC_WRAPPERS, USE_MALLOC_LOCK
5056 * Introduce MALLOC_FAILURE_ACTION, MORECORE_CONTIGUOUS
5057 Thanks to Tony E. Bennett <tbennett@nvidia.com> and others.
5058 * Include errno.h to support default failure action.
5060 V2.6.6 Sun Dec 5 07:42:19 1999 Doug Lea (dl at gee)
5061 * return null for negative arguments
5062 * Added Several WIN32 cleanups from Martin C. Fong <mcfong at yahoo.com>
5063 * Add 'LACKS_SYS_PARAM_H' for those systems without 'sys/param.h'
5064 (e.g. WIN32 platforms)
5065 * Cleanup header file inclusion for WIN32 platforms
5066 * Cleanup code to avoid Microsoft Visual C++ compiler complaints
5067 * Add 'USE_DL_PREFIX' to quickly allow co-existence with existing
5068 memory allocation routines
5069 * Set 'malloc_getpagesize' for WIN32 platforms (needs more work)
5070 * Use 'assert' rather than 'ASSERT' in WIN32 code to conform to
5071 usage of 'assert' in non-WIN32 code
5072 * Improve WIN32 'sbrk()' emulation's 'findRegion()' routine to
5074 * Always call 'fREe()' rather than 'free()'
5076 V2.6.5 Wed Jun 17 15:57:31 1998 Doug Lea (dl at gee)
5077 * Fixed ordering problem with boundary-stamping
5079 V2.6.3 Sun May 19 08:17:58 1996 Doug Lea (dl at gee)
5080 * Added pvalloc, as recommended by H.J. Liu
5081 * Added 64bit pointer support mainly from Wolfram Gloger
5082 * Added anonymously donated WIN32 sbrk emulation
5083 * Malloc, calloc, getpagesize: add optimizations from Raymond Nijssen
5084 * malloc_extend_top: fix mask error that caused wastage after
5086 * Add linux mremap support code from HJ Liu
5088 V2.6.2 Tue Dec 5 06:52:55 1995 Doug Lea (dl at gee)
5089 * Integrated most documentation with the code.
5090 * Add support for mmap, with help from
5091 Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
5092 * Use last_remainder in more cases.
5093 * Pack bins using idea from colin@nyx10.cs.du.edu
5094 * Use ordered bins instead of best-fit threshold
5095 * Eliminate block-local decls to simplify tracing and debugging.
5096 * Support another case of realloc via move into top
5097 * Fix error occurring when initial sbrk_base not word-aligned.
5098 * Rely on page size for units instead of SBRK_UNIT to
5099 avoid surprises about sbrk alignment conventions.
5100 * Add mallinfo, mallopt. Thanks to Raymond Nijssen
5101 (raymond@es.ele.tue.nl) for the suggestion.
5102 * Add `pad' argument to malloc_trim and top_pad mallopt parameter.
5103 * More precautions for cases where other routines call sbrk,
5104 courtesy of Wolfram Gloger (Gloger@lrz.uni-muenchen.de).
5105 * Added macros etc., allowing use in linux libc from
5106 H.J. Lu (hjl@gnu.ai.mit.edu)
5107 * Inverted this history list
5109 V2.6.1 Sat Dec 2 14:10:57 1995 Doug Lea (dl at gee)
5110 * Re-tuned and fixed to behave more nicely with V2.6.0 changes.
5111 * Removed all preallocation code since under current scheme
5112 the work required to undo bad preallocations exceeds
5113 the work saved in good cases for most test programs.
5114 * No longer use return list or unconsolidated bins since
5115 no scheme using them consistently outperforms those that don't
5116 given above changes.
5117 * Use best fit for very large chunks to prevent some worst-cases.
5118 * Added some support for debugging
5120 V2.6.0 Sat Nov 4 07:05:23 1995 Doug Lea (dl at gee)
5121 * Removed footers when chunks are in use. Thanks to
5122 Paul Wilson (wilson@cs.texas.edu) for the suggestion.
5124 V2.5.4 Wed Nov 1 07:54:51 1995 Doug Lea (dl at gee)
5125 * Added malloc_trim, with help from Wolfram Gloger
5126 (wmglo@Dent.MED.Uni-Muenchen.DE).
5128 V2.5.3 Tue Apr 26 10:16:01 1994 Doug Lea (dl at g)
5130 V2.5.2 Tue Apr 5 16:20:40 1994 Doug Lea (dl at g)
5131 * realloc: try to expand in both directions
5132 * malloc: swap order of clean-bin strategy;
5133 * realloc: only conditionally expand backwards
5134 * Try not to scavenge used bins
5135 * Use bin counts as a guide to preallocation
5136 * Occasionally bin return list chunks in first scan
5137 * Add a few optimizations from colin@nyx10.cs.du.edu
5139 V2.5.1 Sat Aug 14 15:40:43 1993 Doug Lea (dl at g)
5140 * faster bin computation & slightly different binning
5141 * merged all consolidations to one part of malloc proper
5142 (eliminating old malloc_find_space & malloc_clean_bin)
5143 * Scan 2 returns chunks (not just 1)
5144 * Propagate failure in realloc if malloc returns 0
5145 * Add stuff to allow compilation on non-ANSI compilers
5146 from kpv@research.att.com
5148 V2.5 Sat Aug 7 07:41:59 1993 Doug Lea (dl at g.oswego.edu)
5149 * removed potential for odd address access in prev_chunk
5150 * removed dependency on getpagesize.h
5151 * misc cosmetics and a bit more internal documentation
5152 * anticosmetics: mangled names in macros to evade debugger strangeness
5153 * tested on sparc, hp-700, dec-mips, rs6000
5154 with gcc & native cc (hp, dec only) allowing
5155 Detlefs & Zorn comparison study (in SIGPLAN Notices.)
5157 Trial version Fri Aug 28 13:14:29 1992 Doug Lea (dl at g.oswego.edu)
5158 * Based loosely on libg++-1.2X malloc. (It retains some of the overall
5159 structure of old version, but most details differ.)