gcc/ada/repinfo.ads

   1 ------------------------------------------------------------------------------
   2 --                                                                          --
   3 --                         GNAT COMPILER COMPONENTS                         --
   4 --                                                                          --
   5 --                              R E P I N F O                               --
   6 --                                                                          --
   7 --                                 S p e c                                  --
   8 --                                                                          --
   9 --          Copyright (C) 1999-2013, Free Software Foundation, Inc.         --
  10 --                                                                          --
  11 -- GNAT is free software;  you can  redistribute it  and/or modify it under --
  12 -- terms of the  GNU General Public License as published  by the Free Soft- --
  13 -- ware  Foundation;  either version 3,  or (at your option) any later ver- --
  14 -- sion.  GNAT is distributed in the hope that it will be useful, but WITH- --
  15 -- OUT ANY WARRANTY;  without even the  implied warranty of MERCHANTABILITY --
  16 -- or FITNESS FOR A PARTICULAR PURPOSE.                                     --
  17 --                                                                          --
  18 -- As a special exception under Section 7 of GPL version 3, you are granted --
  19 -- additional permissions described in the GCC Runtime Library Exception,   --
  20 -- version 3.1, as published by the Free Software Foundation.               --
  21 --                                                                          --
  22 -- You should have received a copy of the GNU General Public License and    --
  23 -- a copy of the GCC Runtime Library Exception along with this program;     --
  24 -- see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see    --
  25 -- <http://www.gnu.org/licenses/>.                                          --
  26 --                                                                          --
  27 -- GNAT was originally developed  by the GNAT team at  New York University. --
  28 -- Extensive contributions were provided by Ada Core Technologies Inc.      --
  29 --                                                                          --
  30 ------------------------------------------------------------------------------
  31
  32 --  This package contains the routines to handle back annotation of the
  33 --  tree to fill in representation information, and also the routine used
  34 --  by -gnatR to print this information. This unit is used both in the
  35 --  compiler and in ASIS (it is used in ASIS as part of the implementation
  36 --  of the data decomposition annex).
  37
  38 with Types; use Types;
  39 with Uintp; use Uintp;
  40
  41 package Repinfo is
  42
  43    --------------------------------
  44    -- Representation Information --
  45    --------------------------------
  46
  47    --  The representation information of interest here is size and
  48    --  component information for arrays and records. For primitive
  49    --  types, the front end computes the Esize and RM_Size fields of
  50    --  the corresponding entities as constant non-negative integers,
  51    --  and the Uint values are stored directly in these fields.
  52
  53    --  For composite types, there are three cases:
  54
  55    --    1. In some cases the front end knows the values statically,
  56    --       for example in the case where representation clauses or
  57    --       pragmas specify the values.
  58
  59    --    2. If Backend_Layout is True, then the backend is responsible
  60    --       for layout of all types and objects not laid out by the
  61    --       front end. This includes all dynamic values, and also
  62    --       static values (e.g. record sizes) when not set by the
  63    --       front end.
  64
  65    --    3. If Backend_Layout is False, then the front end lays out
  66    --       all data, according to target dependent size and alignment
  67    --       information, creating dynamic inlinable functions where
  68    --       needed in the case of sizes not known till runtime.
  69
  70    -----------------------------
  71    -- Back-Annotation by Gigi --
  72    -----------------------------
  73
  74    --  The following interface is used by gigi if Backend_Layout is True
  75
  76    --  As part of the processing in gigi, the types are laid out and
  77    --  appropriate values computed for the sizes and component positions
  78    --  and sizes of records and arrays.
  79
  80    --  The back-annotation circuit in gigi is responsible for updating the
  81    --  relevant fields in the tree to reflect these computations, as follows:
  82
  83    --    For E_Array_Type entities, the Component_Size field
  84
  85    --    For all record and array types and subtypes, the Esize field,
  86    --    which contains the Size (more accurately the Object_SIze) value
  87    --    for the type or subtype.
  88
  89    --    For E_Component and E_Discriminant entities, the Esize (size
  90    --    of component) and Component_Bit_Offset fields. Note that gigi
  91    --    does not (yet ???) back annotate Normalized_Position/First_Bit.
  92
  93    --  There are three cases to consider:
  94
  95    --    1. The value is constant. In this case, the back annotation works
  96    --       by simply storing the non-negative universal integer value in
  97    --       the appropriate field corresponding to this constant size.
  98
  99    --    2. The value depends on variables other than discriminants of the
 100    --       current record. In this case, the value is not known, even if
 101    --       the complete data of the record is available, and gigi marks
 102    --       this situation by storing the special value No_Uint.
 103
 104    --    3. The value depends on the discriminant values for the current
 105    --       record. In this case, gigi back annotates the field with a
 106    --       representation of the expression for computing the value in
 107    --       terms of the discriminants. A negative Uint value is used to
 108    --       represent the value of such an expression, as explained in
 109    --       the following section.
 110
 111    --  GCC expressions are represented with a Uint value that is negative.
 112    --  See the body of this package for details on the representation used.
 113
 114    --  One other case in which gigi back annotates GCC expressions is in
 115    --  the Present_Expr field of an N_Variant node. This expression which
 116    --  will always depend on discriminants, and hence always be represented
 117    --  as a negative Uint value, provides an expression which, when evaluated
 118    --  with a given set of discriminant values, indicates whether the variant
 119    --  is present for that set of values (result is True, i.e. non-zero) or
 120    --  not present (result is False, i.e. zero).
 121
 122    subtype Node_Ref is Uint;
 123    --  Subtype used for negative Uint values used to represent nodes
 124
 125    subtype Node_Ref_Or_Val is Uint;
 126    --  Subtype used for values that can either be a Node_Ref (negative)
 127    --  or a value (non-negative)
 128
 129    type TCode is range 0 .. 28;
 130    --  Type used on Ada side to represent DEFTREECODE values defined in
 131    --  tree.def. Only a subset of these tree codes can actually appear.
 132    --  The names are the names from tree.def in Ada casing.
 133
 134    --  name                             code   description           operands
 135
 136    Cond_Expr        : constant TCode :=  1; -- conditional              3
 137    Plus_Expr        : constant TCode :=  2; -- addition                 2
 138    Minus_Expr       : constant TCode :=  3; -- subtraction              2
 139    Mult_Expr        : constant TCode :=  4; -- multiplication           2
 140    Trunc_Div_Expr   : constant TCode :=  5; -- truncating division      2
 141    Ceil_Div_Expr    : constant TCode :=  6; -- division rounding up     2
 142    Floor_Div_Expr   : constant TCode :=  7; -- division rounding down   2
 143    Trunc_Mod_Expr   : constant TCode :=  8; -- mod for trunc_div        2
 144    Ceil_Mod_Expr    : constant TCode :=  9; -- mod for ceil_div         2
 145    Floor_Mod_Expr   : constant TCode := 10; -- mod for floor_div        2
 146    Exact_Div_Expr   : constant TCode := 11; -- exact div                2
 147    Negate_Expr      : constant TCode := 12; -- negation                 1
 148    Min_Expr         : constant TCode := 13; -- minimum                  2
 149    Max_Expr         : constant TCode := 14; -- maximum                  2
 150    Abs_Expr         : constant TCode := 15; -- absolute value           1
 151    Truth_Andif_Expr : constant TCode := 16; -- Boolean and then         2
 152    Truth_Orif_Expr  : constant TCode := 17; -- Boolean or else          2
 153    Truth_And_Expr   : constant TCode := 18; -- Boolean and              2
 154    Truth_Or_Expr    : constant TCode := 19; -- Boolean or               2
 155    Truth_Xor_Expr   : constant TCode := 20; -- Boolean xor              2
 156    Truth_Not_Expr   : constant TCode := 21; -- Boolean not              1
 157    Lt_Expr          : constant TCode := 22; -- comparison <             2
 158    Le_Expr          : constant TCode := 23; -- comparison <=            2
 159    Gt_Expr          : constant TCode := 24; -- comparison >             2
 160    Ge_Expr          : constant TCode := 25; -- comparison >=            2
 161    Eq_Expr          : constant TCode := 26; -- comparison =             2
 162    Ne_Expr          : constant TCode := 27; -- comparison /=            2
 163    Bit_And_Expr     : constant TCode := 28; -- Binary and               2
 164
 165    --  The following entry is used to represent a discriminant value in
 166    --  the tree. It has a special tree code that does not correspond
 167    --  directly to a gcc node. The single operand is the number of the
 168    --  discriminant in the record (1 = first discriminant).
 169
 170    Discrim_Val : constant TCode := 0;  -- discriminant value       1
 171
 172    ------------------------
 173    -- The gigi Interface --
 174    ------------------------
 175
 176    --  The following declarations are for use by gigi for back annotation
 177
 178    function Create_Node
 179      (Expr : TCode;
 180       Op1  : Node_Ref_Or_Val;
 181       Op2  : Node_Ref_Or_Val := No_Uint;
 182       Op3  : Node_Ref_Or_Val := No_Uint) return Node_Ref;
 183    --  Creates a node using the tree code defined by Expr and from one to three
 184    --  operands as required (unused operands set as shown to No_Uint) Note that
 185    --  this call can be used to create a discriminant reference by using (Expr
 186    --  => Discrim_Val, Op1 => discriminant_number).
 187
 188    function Create_Discrim_Ref (Discr : Entity_Id) return Node_Ref;
 189    --  Creates a reference to the discriminant whose entity is Discr
 190
 191    --------------------------------------------------------
 192    -- Front-End Interface for Dynamic Size/Offset Values --
 193    --------------------------------------------------------
 194
 195    --  If Backend_Layout is False, then the front-end deals with all
 196    --  dynamic size and offset fields. There are two cases:
 197
 198    --    1. The value can be computed at the time of type freezing, and
 199    --       is stored in a run-time constant. In this case, the field
 200    --       contains a reference to this entity. In the case of sizes
 201    --       the value stored is the size in storage units, since dynamic
 202    --       sizes are always a multiple of storage units.
 203
 204    --    2. The size/offset depends on the value of discriminants at
 205    --       run-time. In this case, the front end builds a function to
 206    --       compute the value. This function has a single parameter
 207    --       which is the discriminated record object in question. Any
 208    --       references to discriminant values are simply references to
 209    --       the appropriate discriminant in this single argument, and
 210    --       to compute the required size/offset value at run time, the
 211    --       code generator simply constructs a call to the function
 212    --       with the appropriate argument. The size/offset field in
 213    --       this case contains a reference to the function entity.
 214    --       Note that as for case 1, if such a function is used to
 215    --       return a size, then the size in storage units is returned,
 216    --       not the size in bits.
 217
 218    --  The interface here allows these created entities to be referenced
 219    --  using negative Unit values, so that they can be stored in the
 220    --  appropriate size and offset fields in the tree.
 221
 222    --  In the case of components, if the location of the component is static,
 223    --  then all four fields (Component_Bit_Offset, Normalized_Position, Esize,
 224    --  and Normalized_First_Bit) are set to appropriate values. In the case of
 225    --  a non-static component location, Component_Bit_Offset is not used and
 226    --  is left set to Unknown. Normalized_Position and Normalized_First_Bit
 227    --  are set appropriately.
 228
 229    subtype SO_Ref is Uint;
 230    --  Type used to represent a Uint value that represents a static or
 231    --  dynamic size/offset value (non-negative if static, negative if
 232    --  the size value is dynamic).
 233
 234    subtype Dynamic_SO_Ref is Uint;
 235    --  Type used to represent a negative Uint value used to store
 236    --  a dynamic size/offset value.
 237
 238    function Is_Dynamic_SO_Ref (U : SO_Ref) return Boolean;
 239    pragma Inline (Is_Dynamic_SO_Ref);
 240    --  Given a SO_Ref (Uint) value, returns True iff the SO_Ref value
 241    --  represents a dynamic Size/Offset value (i.e. it is negative).
 242
 243    function Is_Static_SO_Ref (U : SO_Ref) return Boolean;
 244    pragma Inline (Is_Static_SO_Ref);
 245    --  Given a SO_Ref (Uint) value, returns True iff the SO_Ref value
 246    --  represents a static Size/Offset value (i.e. it is non-negative).
 247
 248    function Create_Dynamic_SO_Ref (E : Entity_Id) return Dynamic_SO_Ref;
 249    --  Given the Entity_Id for a constant (case 1), the Node_Id for an
 250    --  expression (case 2), or the Entity_Id for a function (case 3),
 251    --  this function returns a (negative) Uint value that can be used
 252    --  to retrieve the entity or expression for later use.
 253
 254    function Get_Dynamic_SO_Entity (U : Dynamic_SO_Ref) return Entity_Id;
 255    --  Retrieve the Node_Id or Entity_Id stored by a previous call to
 256    --  Create_Dynamic_SO_Ref. The approach is that the front end makes
 257    --  the necessary Create_Dynamic_SO_Ref calls to associate the node
 258    --  and entity id values and the back end makes Get_Dynamic_SO_Ref
 259    --  calls to retrieve them.
 260
 261    --------------------
 262    -- ASIS_Interface --
 263    --------------------
 264
 265    type Discrim_List is array (Pos range <>) of Uint;
 266    --  Type used to represent list of discriminant values
 267
 268    function Rep_Value
 269      (Val : Node_Ref_Or_Val;
 270       D   : Discrim_List) return Uint;
 271    --  Given the contents of a First_Bit_Position or Esize field containing
 272    --  a node reference (i.e. a negative Uint value) and D, the list of
 273    --  discriminant values, returns the interpreted value of this field.
 274    --  For convenience, Rep_Value will take a non-negative Uint value
 275    --  as an argument value, and return it unmodified. A No_Uint value is
 276    --  also returned unmodified.
 277
 278    procedure Tree_Read;
 279    --  Initializes internal tables from current tree file using the relevant
 280    --  Table.Tree_Read routines.
 281
 282    ------------------------
 283    -- Compiler Interface --
 284    ------------------------
 285
 286    procedure List_Rep_Info (Bytes_Big_Endian : Boolean);
 287    --  Procedure to list representation information. Bytes_Big_Endian is the
 288    --  value from Ttypes (Repinfo cannot have a dependency on Ttypes).
 289
 290    procedure Tree_Write;
 291    --  Writes out internal tables to current tree file using the relevant
 292    --  Table.Tree_Write routines.
 293
 294    --------------------------
 295    -- Debugging Procedures --
 296    --------------------------
 297
 298    procedure List_GCC_Expression (U : Node_Ref_Or_Val);
 299    --  Prints out given expression in symbolic form. Constants are listed
 300    --  in decimal numeric form, Discriminants are listed with a # followed
 301    --  by the discriminant number, and operators are output in appropriate
 302    --  symbolic form No_Uint displays as two question marks. The output is
 303    --  on a single line but has no line return after it. This procedure is
 304    --  useful only if operating in backend layout mode.
 305
 306    procedure lgx (U : Node_Ref_Or_Val);
 307    --  In backend layout mode, this is like List_GCC_Expression, but
 308    --  includes a line return at the end. If operating in front end
 309    --  layout mode, then the name of the entity for the size (either
 310    --  a function of a variable) is listed followed by a line return.
 311
 312 end Repinfo;