gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
   3 # Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 2, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING.  If not, write to the Free
  19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
  20 #02110-1301, USA.
  21
  22 # This is the GCC target-specific configuration file
  23 # where a configuration type is mapped to different system-specific
  24 # definitions and files.  This is invoked by the autoconf-generated
  25 # configure script.  Putting it in a separate shell file lets us skip
  26 # running autoconf when modifying target-specific information.
  27
  28 # This file switches on the shell variable ${target}, and also uses the
  29 # following shell variables:
  30 #
  31 #  with_*               Various variables as set by configure.
  32 #
  33 #  enable_threads       Either the name, yes or no depending on whether
  34 #                       threads support was requested.
  35 #
  36 #  default_use_cxa_atexit
  37 #                         The default value for the $enable___cxa_atexit
  38 #                       variable.  enable___cxa_atexit needs to be set to
  39 #                       "yes" for the correct operation of C++ destructors
  40 #                       but it relies upon the presence of a non-standard C
  41 #                       library function called __cxa_atexit.
  42 #                         Since not all C libraries provide __cxa_atexit the
  43 #                       default value of $default_use_cxa_atexit is set to
  44 #                       "no" except for targets which are known to be OK.
  45 #
  46 #  gas_flag             Either yes or no depending on whether GNU as was
  47 #                       requested.
  48 #
  49 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  50 #                       requested.
  51
  52 # This file sets the following shell variables for use by the
  53 # autoconf-generated configure script:
  54 #
  55 #  cpu_type             The name of the cpu, if different from the first
  56 #                       chunk of the canonical target name.
  57 #
  58 #  tm_defines           List of target macros to define for all compilations.
  59 #
  60 #  tm_file              A list of target macro files, if different from
  61 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  62 #                       per target in a way like this:
  63 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  64 #                       Note that the preferred order is:
  65 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  66 #                       - generic headers like dbxelf.h elfos.h, etc.
  67 #                       - specializing target headers like ${cpu_type.h}/elf.h
  68 #                       This helps to keep OS specific stuff out of the CPU
  69 #                       defining header ${cpu_type}/${cpu_type.h}.
  70 #
  71 #  tm_p_file            Location of file with declarations for functions
  72 #                       in $out_file.
  73 #
  74 #  out_file             The name of the machine description C support
  75 #                       file, if different from "$cpu_type/$cpu_type.c".
  76 #
  77 #  md_file              The name of the machine-description file, if
  78 #                       different from "$cpu_type/$cpu_type.md".
  79 #
  80 #  tmake_file           A list of machine-description-specific
  81 #                       makefile-fragments, if different from
  82 #                       "$cpu_type/t-$cpu_type".
  83 #
  84 #  extra_modes          The name of the file containing a list of extra
  85 #                       machine modes, if necessary and different from
  86 #                       "$cpu_type/$cpu_type-modes.def".
  87 #
  88 #  extra_objs           List of extra objects that should be linked into
  89 #                       the compiler proper (cc1, cc1obj, cc1plus)
  90 #                       depending on target.
  91 #
  92 #  extra_gcc_objs       List of extra objects that should be linked into
  93 #                       the compiler driver (gcc) depending on target.
  94 #
  95 #  extra_headers        List of used header files from the directory
  96 #                       config/${cpu_type}.
  97 #
  98 #  extra_passes         List of extra executables compiled for this target
  99 #                       machine, used for compiling from source to object.
 100 #
 101 #  extra_parts          List of extra object files that should be compiled
 102 #                       for this target machine.
 103 #
 104 #  extra_programs       Like extra_passes, but these are used when linking.
 105 #
 106 #  extra_options        List of target-dependent .opt files.
 107 #
 108 #  c_target_objs        List of extra target-dependent objects that be
 109 #                       linked into the C compiler only.
 110 #
 111 #  cxx_target_objs      List of extra target-dependent objects that be
 112 #                       linked into the C++ compiler only.
 113 #
 114 #  target_gtfiles       List of extra source files with type information.
 115 #
 116 #  xm_defines           List of macros to define when compiling for the
 117 #                       target machine.
 118 #
 119 #  xm_file              List of files to include when compiling for the
 120 #                       target machine.
 121 #
 122 #  use_collect2         Set to yes or no, depending on whether collect2
 123 #                       will be used.
 124 #
 125 #  target_cpu_default   Set to override the default target model.
 126 #
 127 #  gdb_needs_out_file_path
 128 #                       Set to yes if gdb needs a dir command with
 129 #                       `dirname $out_file`.
 130 #
 131 #  thread_file          Set to control which thread package to use.
 132 #
 133 #  gas                  Set to yes or no depending on whether the target
 134 #                       system normally uses GNU as.
 135 #
 136 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 137 #                       for this target.  This is true iff this target
 138 #                       supports "long" or "wchar_t" wider than 32 bits.
 139 #
 140 #  configure_default_options
 141 #                       Set to an initializer for configure_default_options
 142 #                       in configargs.h, based on --with-cpu et cetera.
 143 #
 144 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 145 #                       "no" if fixproto should never be run.
 146
 147 # The following variables are used in each case-construct to build up the
 148 # outgoing variables:
 149 #
 150 #  gnu_ld               Set to yes or no depending on whether the target
 151 #                       system normally uses GNU ld.
 152
 153 out_file=
 154 tmake_file=
 155 extra_headers=
 156 extra_passes=
 157 extra_parts=
 158 extra_programs=
 159 extra_objs=
 160 extra_gcc_objs=
 161 extra_options=
 162 c_target_objs=
 163 cxx_target_objs=
 164 tm_defines=
 165 xm_defines=
 166 # Set this to force installation and use of collect2.
 167 use_collect2=
 168 # Set this to override the default target model.
 169 target_cpu_default=
 170 # Set this if gdb needs a dir command with `dirname $out_file`
 171 gdb_needs_out_file_path=
 172 # Set this to control which thread package will be used.
 173 thread_file=
 174 # Reinitialize these from the flag values every loop pass, since some
 175 # configure entries modify them.
 176 gas="$gas_flag"
 177 gnu_ld="$gnu_ld_flag"
 178 default_use_cxa_atexit=no
 179 target_gtfiles=
 180 need_64bit_hwint=
 181
 182 # Default to not using fixproto.  Targets which need fixproto should
 183 # specifically set this to 'yes'.
 184 use_fixproto=no
 185
 186 # Don't carry these over build->host->target.  Please.
 187 xm_file=
 188 md_file=
 189
 190 # Obsolete configurations.
 191 case ${target} in
 192    c4x-*                \
 193  | tic4x-*              \
 194  )
 195     if test "x$enable_obsolete" != xyes; then
 196       echo "*** Configuration ${target} is obsolete." >&2
 197       echo "*** Specify --enable-obsolete to build it anyway." >&2
 198       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 199       echo "*** unless a maintainer comes forward." >&2
 200       exit 1
 201     fi;;
 202 esac
 203
 204 # Unsupported targets list.  Do not put an entry in this list unless
 205 # it would otherwise be caught by a more permissive pattern.  The list
 206 # should be in alphabetical order.
 207 case ${target} in
 208    alpha*-*-linux*libc1*                \
 209  | i[34567]86-sequent-sysv              \
 210  | i[34567]86-sequent-sysv[123]*        \
 211  | i[34567]86-go32-*                    \
 212  | i[34567]86-*-go32*                   \
 213  | m68k-*-linux*aout*                   \
 214  | m68k-*-linux*libc1*                  \
 215  | mips64orion*-*-rtems*                \
 216  | powerpc-*-linux*libc1*               \
 217  | sparc-*-linux*aout*                  \
 218  | sparc-*-linux*libc1*                 \
 219  | sparc-hal-solaris2*                  \
 220  | thumb-*-*                            \
 221  | *-*-linux*coff*                      \
 222  | *-*-linux*oldld*                     \
 223  | *-*-rtemsaout*                       \
 224  | *-*-rtemscoff*                       \
 225  | vax-*-vms*                           \
 226  )
 227         echo "*** Configuration ${target} not supported" 1>&2
 228         exit 1
 229         ;;
 230 esac
 231
 232 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 233 # updated in each machine entry.  Also set default extra_headers for some
 234 # machines.
 235 tm_p_file=
 236 cpu_type=`echo ${target} | sed 's/-.*$//'`
 237 cpu_is_64bit=
 238 case ${target} in
 239 m32c*-*-*)
 240         cpu_type=m32c
 241         tmake_file=m32c/t-m32c
 242         ;;
 243 alpha*-*-*)
 244         cpu_type=alpha
 245         need_64bit_hwint=yes
 246         ;;
 247 am33_2.0-*-linux*)
 248         cpu_type=mn10300
 249         ;;
 250 strongarm*-*-*)
 251         cpu_type=arm
 252         ;;
 253 arm*-*-*)
 254         cpu_type=arm
 255         extra_headers="mmintrin.h"
 256         ;;
 257 bfin*-*)
 258         cpu_type=bfin
 259         ;;
 260 ep9312*-*-*)
 261         cpu_type=arm
 262         ;;
 263 frv*)   cpu_type=frv
 264         ;;
 265 xscale-*-*)
 266         cpu_type=arm
 267         extra_headers="mmintrin.h"
 268         ;;
 269 i[34567]86-*-*)
 270         cpu_type=i386
 271         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 272         ;;
 273 x86_64-*-*)
 274         cpu_type=i386
 275         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 276         need_64bit_hwint=yes
 277         ;;
 278 ia64-*-*)
 279         extra_headers=ia64intrin.h
 280         need_64bit_hwint=yes
 281         ;;
 282 hppa*-*-* | parisc*-*-*)
 283         cpu_type=pa
 284         ;;
 285 m32r*-*-*)
 286         cpu_type=m32r
 287         ;;
 288 m680[012]0-*-*)
 289         cpu_type=m68k
 290         extra_headers=math-68881.h
 291         ;;
 292 m68k-*-*)
 293         extra_headers=math-68881.h
 294         ;;
 295 mips*-*-*)
 296         cpu_type=mips
 297         need_64bit_hwint=yes
 298         ;;
 299 powerpc*-*-*)
 300         cpu_type=rs6000
 301         extra_headers="ppc-asm.h altivec.h spe.h"
 302         need_64bit_hwint=yes
 303         case x$with_cpu in
 304             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[345]|xrs64a)
 305                 cpu_is_64bit=yes
 306                 ;;
 307         esac
 308         ;;
 309 rs6000*-*-*)
 310         need_64bit_hwint=yes
 311         ;;
 312 sparc64*-*-*)
 313         cpu_type=sparc
 314         need_64bit_hwint=yes
 315         ;;
 316 sparc*-*-*)
 317         cpu_type=sparc
 318         ;;
 319 s390*-*-*)
 320         cpu_type=s390
 321         need_64bit_hwint=yes
 322         ;;
 323 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 324 sh[123456789lbe]*-*-*)
 325         cpu_type=sh
 326         need_64bit_hwint=yes
 327         ;;
 328 tic4x-*-*)
 329         cpu_type=c4x
 330         ;;
 331 esac
 332
 333 tm_file=${cpu_type}/${cpu_type}.h
 334 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 335 then
 336         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 337 fi
 338 extra_modes=
 339 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 340 then
 341         extra_modes=${cpu_type}/${cpu_type}-modes.def
 342 fi
 343 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 344 then
 345         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 346 fi
 347
 348 case ${target} in
 349 x86_64-*-*)
 350         tm_file="i386/biarch64.h ${tm_file}"
 351         ;;
 352 esac
 353
 354 # On a.out targets, we need to use collect2.
 355 case ${target} in
 356 *-*-*aout*)
 357         use_collect2=yes
 358         ;;
 359 esac
 360
 361 # Common parts for widely ported systems.
 362 case ${target} in
 363 *-*-darwin*)
 364   tm_file="${tm_file} darwin.h ${cpu_type}/darwin.h"
 365   tm_p_file="${tm_p_file} darwin-protos.h"
 366   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 367   target_gtfiles="\$(srcdir)/config/darwin.c"
 368   extra_options="${extra_options} darwin.opt"
 369   c_target_objs="darwin-c.o"
 370   cxx_target_objs="darwin-c.o"
 371   extra_objs="darwin.o"
 372   default_use_cxa_atexit=yes
 373   case ${enable_threads} in
 374     "" | yes | posix) thread_file='posix' ;;
 375   esac
 376   ;;
 377 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 378   # This is the place-holder for the generic a.out configuration
 379   # of FreeBSD.  No actual configuration resides here since
 380   # there was only ever a bare-bones ix86 configuration for
 381   # a.out and it exists solely in the machine-specific section.
 382   # This place-holder must exist to avoid dropping into
 383   # the generic ELF configuration of FreeBSD (i.e. it must be
 384   # ordered before that section).
 385   ;;
 386 *-*-freebsd*)
 387   # This is the generic ELF configuration of FreeBSD.  Later
 388   # machine-specific sections may refine and add to this
 389   # configuration.
 390   #
 391   # Due to tm_file entry ordering issues that vary between cpu
 392   # architectures, we only define fbsd_tm_file to allow the
 393   # machine-specific section to dictate the final order of all
 394   # entries of tm_file with the minor exception that components
 395   # of the tm_file set here will always be of the form:
 396   #
 397   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 398   #
 399   # The machine-specific section should not tamper with this
 400   # ordering but may order all other entries of tm_file as it
 401   # pleases around the provided core setting.
 402   gas=yes
 403   gnu_ld=yes
 404   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 405   case ${target} in
 406     *-*-freebsd3 | *-*-freebsd[3].*)
 407       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
 408     *-*-freebsd4 | *-*-freebsd[4].*)
 409       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
 410     *-*-freebsd5 | *-*-freebsd[5].*)
 411       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
 412     *-*-freebsd6 | *-*-freebsd[6].*)
 413       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
 414     *-*-freebsd7 | *-*-freebsd[7].*)
 415       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
 416     *-*-freebsd8 | *-*-freebsd[8].*)
 417       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
 418     *-*-freebsd9 | *-*-freebsd[9].*)
 419       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
 420     *)
 421       echo 'Please update *-*-freebsd* in gcc/config.gcc'
 422       exit 1
 423       ;;
 424   esac
 425   tmake_file="t-slibgcc-elf-ver t-freebsd"
 426   case ${enable_threads} in
 427     no)
 428       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 429       ;;
 430     "" | yes | posix)
 431       thread_file='posix'
 432       tmake_file="${tmake_file} t-freebsd-thread"
 433       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 434       # when "optionally" threaded via weak pthread_* checks.
 435       case ${target} in
 436         *-*-freebsd[34] | *-*-freebsd[34].*)
 437           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 438           ;;
 439       esac
 440       ;;
 441     *)
 442       echo 'Unknown thread configuration for FreeBSD'
 443       exit 1
 444       ;;
 445   esac
 446   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 447   ;;
 448 *-*-linux*libc1* | *-*-linux*aout*)
 449   # Avoid the generic linux case.
 450   ;;
 451 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 452   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 453   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 454   extra_options="${extra_options} linux.opt"
 455   gas=yes
 456   gnu_ld=yes
 457   case ${enable_threads} in
 458     "" | yes | posix) thread_file='posix' ;;
 459   esac
 460   tmake_file="t-slibgcc-elf-ver t-linux"
 461   case ${target} in
 462     *-*-*uclibc*)
 463       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 464       ;;
 465     *)
 466       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
 467       ;;
 468   esac
 469   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
 470   default_use_cxa_atexit=yes
 471   ;;
 472 *-*-gnu*)
 473   # On the Hurd, the setup is just about the same on
 474   # each different CPU.  The specific machines that we
 475   # support are matched above and just set $cpu_type.
 476   tm_file="${cpu_type}/gnu.h"
 477   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 478   # GNU tools are the only tools.
 479   gas=yes
 480   gnu_ld=yes
 481   # These details are the same as for Linux.
 482   # But here we need a little extra magic.
 483   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 484   case ${target} in
 485     alpha*)
 486       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 487       ;;
 488     i[34567]86-*-*)
 489       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 490       ;;
 491   esac
 492   # Assume that glibc is being used and so __cxa_atexit is provided.
 493   default_use_cxa_atexit=yes
 494   ;;
 495 *-*-netbsd*)
 496   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 497   gas=yes
 498   gnu_ld=yes
 499
 500   # NetBSD 2.0 and later get POSIX threads enabled by default.
 501   # Allow them to be explicitly enabled on any other version.
 502   case ${enable_threads} in
 503     "")
 504       case ${target} in
 505         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 506           thread_file='posix'
 507           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 508           ;;
 509       esac
 510       ;;
 511     yes | posix)
 512       thread_file='posix'
 513       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 514       ;;
 515   esac
 516
 517   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 518   # ELF configurations.  We will clear extra_parts in the
 519   # a.out configurations.
 520   case ${target} in
 521     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 522       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 523       ;;
 524   esac
 525
 526   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 527   # default (unless overridden by --disable-__cxa_atexit).
 528   case ${target} in
 529     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 530       default_use_cxa_atexit=yes
 531       ;;
 532   esac
 533   ;;
 534 *-*-openbsd*)
 535   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 536   case ${enable_threads} in
 537     yes)
 538       thread_file='posix'
 539       tmake_file="${tmake_file} t-openbsd-thread"
 540       ;;
 541   esac
 542   case ${target} in
 543     *-*-openbsd2.*|*-*-openbsd3.[012])
 544       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 545   esac
 546   ;;
 547 *-*-rtems*)
 548   case ${enable_threads} in
 549     yes) thread_file='rtems' ;;
 550   esac
 551   ;;
 552 *-*-vxworks*)
 553   tmake_file=t-vxworks
 554   tm_file="${tm_file} elfos.h svr4.h"
 555   xm_defines=POSIX
 556   extra_options="${extra_options} vxworks.opt"
 557   case ${enable_threads} in
 558     no) ;;
 559     "" | yes | vxworks) thread_file='vxworks' ;;
 560     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 561   esac
 562   ;;
 563 *-*-elf)
 564   # Assume that newlib is being used and so __cxa_atexit is provided.
 565   default_use_cxa_atexit=yes
 566   ;;
 567 esac
 568
 569 case ${target} in
 570 # Support site-specific machine types.
 571 *local*)
 572         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 573         tm_file=${cpu_type}/$rest.h
 574         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 575         then xm_file=${cpu_type}/xm-$rest.h
 576         fi
 577         if test -f $srcdir/config/${cpu_type}/t-$rest
 578         then tmake_file=${cpu_type}/t-$rest
 579         fi
 580         ;;
 581 alpha*-*-unicosmk*)
 582         use_collect2=yes
 583         tm_file="${tm_file} alpha/unicosmk.h"
 584
 585         # Don't include t-ieee for now because we don't support that yet
 586         # tmake_file="alpha/t-ieee"
 587         tmake_file="alpha/t-unicosmk"
 588         use_fixproto=yes
 589         ;;
 590 alpha*-*-linux*)
 591         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 592         target_cpu_default="MASK_GAS"
 593         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
 594         ;;
 595 alpha*-*-gnu*)
 596         target_cpu_default="MASK_GAS"
 597         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 598         ;;
 599 alpha*-*-freebsd*)
 600         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 601         target_cpu_default="MASK_GAS"
 602         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 603         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 604         ;;
 605 alpha*-*-netbsd*)
 606         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 607         target_cpu_default="MASK_GAS"
 608         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 609         ;;
 610 alpha*-*-openbsd*)
 611         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 612         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 613         # default x-alpha is only appropriate for dec-osf.
 614         target_cpu_default="MASK_GAS"
 615         tmake_file="alpha/t-alpha alpha/t-ieee"
 616         ;;
 617 alpha*-dec-osf[45]*)
 618         if test x$stabs = xyes
 619         then
 620                 tm_file="${tm_file} dbx.h"
 621         fi
 622         if test x$gas != xyes
 623         then
 624                 extra_passes="mips-tfile mips-tdump"
 625         fi
 626         use_collect2=yes
 627         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 628         tm_file="${tm_file} alpha/osf.h"
 629         extra_headers=va_list.h
 630         case ${target} in
 631           *-*-osf4*)
 632             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 633             case ${target} in
 634                 *-*-osf4.0a) ;;
 635                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 636             esac
 637             ;;
 638           *-*-osf5*)
 639             tm_file="${tm_file} alpha/osf5.h"
 640             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 641             ;;
 642         esac
 643         case ${enable_threads} in
 644           "" | yes | posix)
 645             thread_file='posix'
 646             tmake_file="${tmake_file} alpha/t-osf-pthread"
 647             ;;
 648         esac
 649         ;;
 650 alpha64-dec-*vms*)
 651         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 652         xm_file="alpha/xm-vms.h"
 653         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 654         prefix=/gnu
 655         local_prefix=/gnu
 656         ;;
 657 alpha*-dec-*vms*)
 658         tm_file="${tm_file} alpha/vms.h"
 659         xm_file=alpha/xm-vms.h
 660         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 661         prefix=/gnu
 662         local_prefix=/gnu
 663         ;;
 664 arc-*-elf*)
 665         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 666         extra_parts="crtinit.o crtfini.o"
 667         use_fixproto=yes
 668         ;;
 669 arm-*-coff* | armel-*-coff*)
 670         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 671         tmake_file="arm/t-arm arm/t-arm-coff"
 672         ;;
 673 arm-semi-aof | armel-semi-aof)
 674         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
 675         tmake_file="arm/t-arm arm/t-semi"
 676         ;;
 677 arm-wrs-vxworks)
 678         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
 679         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 680         ;;
 681 arm*-*-freebsd*|strongarm*-*-freebsd*)
 682         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 683         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 684         ;;
 685 arm*-*-netbsdelf*)
 686         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 687         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 688         ;;
 689 arm*-*-netbsd*)
 690         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 691         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 692         extra_parts=""
 693         use_collect2=yes
 694         ;;
 695 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 696         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 697         tmake_file="${tmake_file} t-linux arm/t-arm"
 698         case ${target} in
 699         arm*-*-linux-*eabi)
 700             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 701             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
 702             # The BPABI long long divmod functions return a 128-bit value in
 703             # registers r0-r3.  Correctly modeling that requires the use of
 704             # TImode.
 705             need_64bit_hwint=yes
 706             # The EABI requires the use of __cxa_atexit.
 707             default_use_cxa_atexit=yes
 708             ;;
 709         *)
 710             tmake_file="$tmake_file arm/t-linux"
 711             ;;
 712         esac
 713         tm_file="$tm_file arm/aout.h arm/arm.h"
 714         ;;
 715 arm*-*-uclinux*)                # ARM ucLinux
 716         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
 717         tmake_file="arm/t-arm arm/t-arm-elf"
 718         ;;
 719 arm*-*-ecos-elf)
 720         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 721         tmake_file="arm/t-arm arm/t-arm-elf"
 722         ;;
 723 arm*-*-eabi* | arm*-*-symbianelf* )
 724         # The BPABI long long divmod functions return a 128-bit value in
 725         # registers r0-r3.  Correctly modeling that requires the use of
 726         # TImode.
 727         need_64bit_hwint=yes
 728         default_use_cxa_atexit=yes
 729         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 730         tmake_file="arm/t-arm arm/t-arm-elf"
 731         case ${target} in
 732         arm*-*-eabi*)
 733           tmake_file="${tmake_file} arm/t-bpabi"
 734           ;;
 735         arm*-*-symbianelf*)
 736           tm_file="${tm_file} arm/symbian.h"
 737           # We do not include t-bpabi for Symbian OS because the system
 738           # provides its own implementation of the BPABI functions.
 739           tmake_file="${tmake_file} arm/t-symbian"
 740           ;;
 741         esac
 742         tm_file="${tm_file} arm/aout.h arm/arm.h"
 743         ;;
 744 arm*-*-rtems*)
 745         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 746         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 747         ;;
 748 arm*-*-elf | ep9312-*-elf)
 749         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 750         tmake_file="arm/t-arm arm/t-arm-elf"
 751         ;;
 752 arm*-wince-pe*)
 753         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 754         tmake_file="arm/t-arm arm/t-wince-pe"
 755         extra_options="${extra_options} arm/pe.opt"
 756         extra_objs="pe.o"
 757         ;;
 758 arm-*-pe*)
 759         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 760         tmake_file="arm/t-arm arm/t-pe"
 761         extra_options="${extra_options} arm/pe.opt"
 762         extra_objs="pe.o"
 763         ;;
 764 arm*-*-kaos*)
 765         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
 766         tmake_file="arm/t-arm arm/t-arm-elf"
 767         ;;
 768 avr-*-rtems*)
 769         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
 770         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 771         ;;
 772 avr-*-*)
 773         tm_file="avr/avr.h dbxelf.h"
 774         use_fixproto=yes
 775         ;;
 776 bfin*-elf*)
 777         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 778         tmake_file=bfin/t-bfin-elf
 779         use_collect2=no
 780         ;;
 781 bfin*-uclinux*)
 782         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
 783         tmake_file=bfin/t-bfin-elf
 784         use_collect2=no
 785         ;;
 786 bfin*-*)
 787         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 788         tmake_file=bfin/t-bfin
 789         use_collect2=no
 790         ;;
 791 c4x-*-rtems* | tic4x-*-rtems*)
 792         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
 793         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
 794         c_target_objs="c4x-c.o"
 795         cxx_target_objs="c4x-c.o"
 796         ;;
 797 c4x-* | tic4x-*)
 798         tmake_file=c4x/t-c4x
 799         c_target_objs="c4x-c.o"
 800         cxx_target_objs="c4x-c.o"
 801         ;;
 802 cris-*-aout)
 803         tm_file="dbxelf.h ${tm_file} cris/aout.h"
 804         gas=yes
 805         tmake_file="cris/t-cris cris/t-aout"
 806         extra_options="${extra_options} cris/aout.opt"
 807         ;;
 808 cris-*-elf | cris-*-none)
 809         tm_file="dbxelf.h elfos.h ${tm_file}"
 810         tmake_file="cris/t-cris cris/t-elfmulti"
 811         gas=yes
 812         extra_options="${extra_options} cris/elf.opt"
 813         ;;
 814 cris-*-linux*)
 815         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 816         # We need to avoid using t-linux, so override default tmake_file
 817         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 818         extra_options="${extra_options} cris/linux.opt"
 819         ;;
 820 crx-*-elf)
 821         tm_file="elfos.h ${tm_file}"
 822         extra_parts="crtbegin.o crtend.o"
 823         use_collect2=no
 824         ;;
 825 fr30-*-elf)
 826         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 827         tmake_file=fr30/t-fr30
 828         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 829         use_fixproto=yes
 830         ;;
 831 frv-*-elf)
 832         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 833         tmake_file=frv/t-frv
 834         use_fixproto=yes
 835         ;;
 836 frv-*-*linux*)
 837         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 838                  linux.h frv/linux.h frv/frv-abi.h"
 839         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 840         ;;
 841 h8300-*-rtemscoff*)
 842         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
 843         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
 844         ;;
 845 h8300-*-rtems*)
 846         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 847         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
 848         ;;
 849 h8300-*-elf*)
 850         tmake_file="h8300/t-h8300 h8300/t-elf"
 851         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 852         use_fixproto=yes
 853         ;;
 854 h8300-*-*)
 855         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 856         use_fixproto=yes
 857         ;;
 858 hppa*64*-*-linux* | parisc*64*-*-linux*)
 859         target_cpu_default="MASK_PA_11|MASK_PA_20"
 860         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 861                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 862         tmake_file="${tmake_file} pa/t-linux64"
 863         gas=yes gnu_ld=yes
 864         need_64bit_hwint=yes
 865         ;;
 866 hppa*-*-linux* | parisc*-*-linux*)
 867         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 868         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 869                  pa/pa32-regs.h pa/pa32-linux.h"
 870         tmake_file="${tmake_file} pa/t-linux"
 871         # Set the libgcc version number
 872         if test x$sjlj = x1; then
 873             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 874         else
 875             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 876         fi
 877         ;;
 878 # port not yet contributed.
 879 #hppa*-*-openbsd*)
 880 #       target_cpu_default="MASK_PA_11"
 881 #       ;;
 882 hppa1.1-*-pro*)
 883         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 884         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 885                  pa/pa-pro-end.h libgloss.h"
 886         tmake_file="pa/t-pro"
 887         ;;
 888 hppa1.1-*-osf*)
 889         target_cpu_default="MASK_PA_11"
 890         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
 891         tmake_file="pa/t-pa"
 892         use_collect2=yes
 893         ;;
 894 hppa1.1-*-bsd*)
 895         target_cpu_default="MASK_PA_11"
 896         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
 897         tmake_file="pa/t-pa"
 898         use_collect2=yes
 899         ;;
 900 hppa[12]*-*-hpux10*)
 901         case ${target} in
 902         hppa1.1-*-* | hppa2*-*-*)
 903                 target_cpu_default="MASK_PA_11"
 904                 ;;
 905         esac
 906         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 907                  pa/pa-hpux.h pa/pa-hpux10.h"
 908         extra_options="${extra_options} pa/pa-hpux.opt"
 909         case ${target} in
 910         *-*-hpux10.[1-9]*)
 911                 tm_file="${tm_file} pa/pa-hpux1010.h"
 912                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 913                 ;;
 914         esac
 915         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 916         case ${enable_threads} in
 917           "")
 918             if test x$have_pthread_h = xyes ; then
 919               tmake_file="${tmake_file} pa/t-dce-thr"
 920             fi
 921             ;;
 922           yes | dce)
 923             tmake_file="${tmake_file} pa/t-dce-thr"
 924             ;;
 925         esac
 926         # Set the libgcc version number
 927         if test x$sjlj = x1; then
 928             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 929         else
 930             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 931         fi
 932         use_collect2=yes
 933         use_fixproto=yes
 934         ;;
 935 hppa*64*-*-hpux11*)
 936         target_cpu_default="MASK_PA_11|MASK_PA_20"
 937         if test x$gnu_ld = xyes
 938         then
 939                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 940         fi
 941         if test x$gas = xyes
 942         then
 943                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 944                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 945                          pa/pa-hpux11.h"
 946         else
 947                 tm_file="pa/pa64-start.h ${tm_file} dbxelf.h pa/elf.h \
 948                          pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 949                          pa/pa-hpux11.h"
 950         fi
 951         case ${target} in
 952         *-*-hpux11.[1-9]*)
 953                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 954                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 955                 ;;
 956         *)
 957                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 958                 ;;
 959         esac
 960         extra_options="${extra_options} pa/pa-hpux.opt \
 961                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
 962         need_64bit_hwint=yes
 963         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
 964         # Set the libgcc version number
 965         if test x$sjlj = x1; then
 966             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 967         else
 968             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 969         fi
 970         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 971         case x${enable_threads} in
 972         xyes | xposix )
 973                 thread_file=posix
 974                 ;;
 975         esac
 976         ;;
 977 hppa[12]*-*-hpux11*)
 978         case ${target} in
 979         hppa1.1-*-* | hppa2*-*-*)
 980                 target_cpu_default="MASK_PA_11"
 981                 ;;
 982         esac
 983         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 984                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
 985         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
 986         case ${target} in
 987         *-*-hpux11.[1-9]*)
 988                 tm_file="${tm_file} pa/pa-hpux1111.h"
 989                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 990                 ;;
 991         esac
 992         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
 993         # Set the libgcc version number
 994         if test x$sjlj = x1; then
 995             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 996         else
 997             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 998         fi
 999         case x${enable_threads} in
1000         xyes | xposix )
1001                 thread_file=posix
1002                 ;;
1003         esac
1004         use_collect2=yes
1005         ;;
1006 i[34567]86-*-darwin*)
1007         # All the configuration is presently done generically.
1008         ;;
1009 i[34567]86-*-elf*)
1010         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1011         tmake_file="i386/t-i386elf t-svr4"
1012         use_fixproto=yes
1013         ;;
1014 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1015         if test x$gas = xyes
1016         then
1017                 tm_file="${tm_file} usegas.h"
1018         fi
1019         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1020         tmake_file=t-svr4
1021         extra_parts="crtbegin.o crtend.o"
1022         use_fixproto=yes
1023         ;;
1024 i[34567]86-*-aout*)
1025         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1026         use_fixproto=yes
1027         ;;
1028 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1029         tmake_file='i386/t-beos i386/t-crtpic'
1030         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1031         extra_parts='crtbegin.o crtend.o'
1032         ;;
1033 i[34567]86-*-freebsd*)
1034         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1035         ;;
1036 x86_64-*-freebsd*)
1037         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1038         ;;
1039 i[34567]86-*-netbsdelf*)
1040         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1041         ;;
1042 i[34567]86-*-netbsd*)
1043         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1044         tmake_file=t-netbsd
1045         extra_parts=""
1046         use_collect2=yes
1047         ;;
1048 x86_64-*-netbsd*)
1049         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1050         ;;
1051 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1052         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1053         # needed to unconfuse gdb
1054         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1055         # we need collect2 until our bug is fixed...
1056         use_collect2=yes
1057         ;;
1058 i[34567]86-*-openbsd*)
1059         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1060         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1061         gas=yes
1062         gnu_ld=yes
1063         ;;
1064 i[34567]86-*-coff*)
1065         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1066         use_fixproto=yes
1067         ;;
1068 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1069                         # Intel 80386's running GNU/*
1070                         # with ELF format using glibc 2
1071         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
1072         case ${target} in
1073         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1074         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1075         esac
1076         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
1077         ;;
1078 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1079         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1080                  i386/x86-64.h i386/linux64.h"
1081         case ${target} in
1082         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1083         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1084         esac
1085         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
1086         ;;
1087 i[34567]86-*-gnu*)
1088         ;;
1089 i[34567]86-pc-msdosdjgpp*)
1090         xm_file=i386/xm-djgpp.h
1091         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1092         tmake_file=i386/t-djgpp
1093         extra_options="${extra_options} i386/djgpp.opt"
1094         gnu_ld=yes
1095         gas=yes
1096         ;;
1097 i[34567]86-*-lynxos*)
1098         xm_defines=POSIX
1099         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1100         tmake_file="i386/t-crtstuff t-lynx"
1101         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1102         extra_options="${extra_options} lynx.opt"
1103         thread_file=lynx
1104         gnu_ld=yes
1105         gas=yes
1106         ;;
1107 i[3456x]86-*-netware*)
1108         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1109         tmake_file=i386/t-netware
1110         extra_objs=netware.o
1111         case /${with_ld} in
1112         */nwld)
1113                 extra_objs="$extra_objs nwld.o"
1114                 tm_file="${tm_file} i386/nwld.h"
1115                 tmake_file="${tmake_file} i386/t-nwld"
1116                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1117                 ;;
1118         esac
1119         case x${enable_threads} in
1120         x | xyes | xposix) thread_file='posix';;
1121         xnks) thread_file='nks';;
1122         xno) ;;
1123         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1124         esac
1125         ;;
1126 i[34567]86-*-nto-qnx*)
1127         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1128         tmake_file=i386/t-nto
1129         gnu_ld=yes
1130         gas=yes
1131         ;;
1132 i[34567]86-*-rtems*)
1133         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1134         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1135         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1136         ;;
1137 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1138         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1139         if test x$gas = xyes
1140         then
1141                 tm_file="usegas.h ${tm_file}"
1142         fi
1143         tmake_file=i386/t-sco5
1144         extra_parts="crtbegin.o crtend.o"
1145         extra_options="${extra_options} i386/sco5.opt"
1146         use_fixproto=yes
1147         ;;
1148 i[34567]86-*-solaris2*)
1149         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1150         case ${target} in
1151         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1152                 tm_file="${tm_file} sol2-6.h"
1153                 ;;
1154         *-*-solaris2.1[0-9]*)
1155                 tm_file="${tm_file} sol2-10.h"
1156                 ;;
1157         esac
1158         tm_file="${tm_file} i386/sol2.h"
1159         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1160         c_target_objs="sol2-c.o"
1161         cxx_target_objs="sol2-c.o"
1162         extra_objs="sol2.o"
1163         tm_p_file="${tm_p_file} sol2-protos.h"
1164         if test x$gnu_ld = xyes; then
1165                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1166                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1167         else
1168                 tmake_file="$tmake_file t-slibgcc-sld"
1169         fi
1170         case ${target} in
1171         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1172                 tm_file="$tm_file tm-dwarf2.h"
1173                 ;;
1174         esac
1175         case ${target} in
1176         *-*-solaris2.1[0-9]*)
1177                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1178                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1179                 tmake_file="$tmake_file i386/t-sol2-10"
1180                 need_64bit_hwint=yes
1181                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1182                 # part of the base system.
1183                 extra_parts="gmon.o crtbegin.o crtend.o"
1184                 ;;
1185         *)
1186                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1187                 ;;
1188         esac
1189         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1190           "":yes:* | yes:yes:* )
1191                 case ${target} in
1192                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1193                         thread_file=posix95
1194                         ;;
1195                   *)
1196                         thread_file=posix
1197                         ;;
1198                 esac
1199                 ;;
1200           "":*:yes | yes:*:yes )
1201                 thread_file=solaris
1202                 ;;
1203         esac
1204         ;;
1205 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1206        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1207        if test x$stabs = xyes
1208        then
1209                tm_file="${tm_file} dbx.h"
1210        fi
1211        tmake_file="i386/t-crtpic t-svr4"
1212        extra_parts="crtbegin.o crtend.o"
1213        if test x$enable_threads = xyes; then
1214                thread_file='posix'
1215        fi
1216         use_fixproto=yes
1217        ;;
1218 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1219         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1220         if test x$stabs = xyes
1221         then
1222                 tm_file="${tm_file} dbx.h"
1223         fi
1224         tmake_file="i386/t-crtpic t-svr4"
1225         extra_parts="crtbegin.o crtend.o"
1226         use_fixproto=yes
1227         ;;
1228 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1229         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1230         case ${target} in
1231           *-vxworksae*)
1232             tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1233             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1234             ;;
1235           *)
1236             tm_file="${tm_file} vxworks.h i386/vxworks.h"
1237             tmake_file="${tmake_file} i386/t-vxworks"
1238             ;;
1239         esac
1240         ;;
1241 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1242         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1243         xm_file=i386/xm-cygwin.h
1244         tmake_file="i386/t-cygwin i386/t-cygming"
1245         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1246         extra_options="${extra_options} i386/cygming.opt"
1247         extra_objs="winnt.o winnt-stubs.o"
1248         c_target_objs=cygwin2.o
1249         cxx_target_objs="cygwin2.o winnt-cxx.o"
1250         extra_gcc_objs=cygwin1.o
1251         if test x$enable_threads = xyes; then
1252                 thread_file='posix'
1253         fi
1254         ;;
1255 i[34567]86-*-mingw32*)
1256         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1257         xm_file=i386/xm-mingw32.h
1258         tmake_file="i386/t-cygming i386/t-mingw32"
1259         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1260         extra_options="${extra_options} i386/cygming.opt"
1261         extra_objs="winnt.o winnt-stubs.o"
1262         cxx_target_objs=winnt-cxx.o
1263         case ${enable_threads} in
1264           "" | yes | win32) thread_file='win32' ;;
1265         esac
1266         case ${target} in
1267                 *mingw32crt*)
1268                         tm_file="${tm_file} i386/crtdll.h"
1269                         ;;
1270                 *mingw32msv* | *mingw32*)
1271                         ;;
1272         esac
1273         ;;
1274 i[34567]86-*-uwin*)
1275         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1276         tmake_file="i386/t-cygwin i386/t-uwin"
1277         extra_objs=winnt.o
1278         extra_options="${extra_options} i386/cygming.opt"
1279         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1280         if test x$enable_threads = xyes; then
1281                 thread_file='win32'
1282         fi
1283         use_fixproto=yes
1284         ;;
1285 i[34567]86-*-interix3*)
1286         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1287         tmake_file="i386/t-interix"
1288         extra_objs=winnt.o
1289         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1290         if test x$enable_threads = xyes ; then
1291                 thread_file='posix'
1292         fi
1293         if test x$stabs = xyes ; then
1294                 tm_file="${tm_file} dbxcoff.h"
1295         fi
1296         ;;
1297 i[34567]86-*-kaos*)
1298         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1299         tmake_file="i386/t-i386elf t-svr4"
1300         ;;
1301 ia64*-*-elf*)
1302         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1303         tmake_file="ia64/t-ia64"
1304         target_cpu_default="0"
1305         if test x$gas = xyes
1306         then
1307                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1308         fi
1309         if test x$gnu_ld = xyes
1310         then
1311                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1312         fi
1313         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1314         use_fixproto=yes
1315         ;;
1316 ia64*-*-freebsd*)
1317         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1318         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1319         tmake_file="${tmake_file} ia64/t-ia64"
1320         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1321         ;;
1322 ia64*-*-linux*)
1323         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1324         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1325         if test x$with_system_libunwind != xyes ; then
1326                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1327         fi
1328         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1329         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1330         ;;
1331 ia64*-*-hpux*)
1332         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1333         tmake_file="ia64/t-ia64 ia64/t-hpux"
1334         target_cpu_default="MASK_GNU_AS"
1335         case x$enable_threads in
1336         xyes | xposix )
1337                 thread_file=posix
1338                 ;;
1339         esac
1340         use_collect2=no
1341         c_target_objs="ia64-c.o"
1342         cxx_target_objs="ia64-c.o"
1343         extra_options="${extra_options} ia64/ilp32.opt"
1344         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1345         # in ia64/t-hpux, and also fix the definition of putenv in
1346         # sys-protos.h (const char not char).
1347         ;;
1348 iq2000*-*-elf*)
1349         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1350         tmake_file=iq2000/t-iq2000
1351         out_file=iq2000/iq2000.c
1352         md_file=iq2000/iq2000.md
1353         use_fixproto=yes
1354         ;;
1355 m32r-*-elf*)
1356         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1357         extra_parts="crtinit.o crtfini.o"
1358         use_fixproto=yes
1359         ;;
1360 m32rle-*-elf*)
1361         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1362         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1363         use_fixproto=yes
1364         ;;
1365 m32r-*-linux*)
1366         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1367         # We override the tmake_file for linux -- why?
1368         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1369         gnu_ld=yes
1370         use_fixproto=yes
1371         if test x$enable_threads = xyes; then
1372                 thread_file='posix'
1373         fi
1374         ;;
1375 m32rle-*-linux*)
1376         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1377         # We override the tmake_file for linux -- why?
1378         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1379         gnu_ld=yes
1380         use_fixproto=yes
1381         if test x$enable_threads = xyes; then
1382                 thread_file='posix'
1383         fi
1384         ;;
1385 # m68hc11 and m68hc12 share the same machine description.
1386 m68hc11-*-*|m6811-*-*)
1387         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1388         tm_p_file="m68hc11/m68hc11-protos.h"
1389         md_file="m68hc11/m68hc11.md"
1390         out_file="m68hc11/m68hc11.c"
1391         tmake_file="m68hc11/t-m68hc11-gas"
1392         use_fixproto=yes
1393         ;;
1394 m68hc12-*-*|m6812-*-*)
1395         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1396         tm_p_file="m68hc11/m68hc11-protos.h"
1397         md_file="m68hc11/m68hc11.md"
1398         out_file="m68hc11/m68hc11.c"
1399         tmake_file="m68hc11/t-m68hc11-gas"
1400         extra_options="${extra_options} m68hc11/m68hc11.opt"
1401         use_fixproto=yes
1402         ;;
1403 m68k-*-aout*)
1404         tmake_file=m68k/t-m68kbare
1405         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1406         ;;
1407 m68k-*-coff*)
1408         tmake_file=m68k/t-m68kbare
1409         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1410         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1411         use_fixproto=yes
1412         ;;
1413 m68020-*-elf* | m68k-*-elf*)
1414         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1415         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1416         tmake_file=m68k/t-m68kelf
1417         extra_parts="crtbegin.o crtend.o"
1418         ;;
1419 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1420         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1421         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1422         case ${target} in
1423         m68010*)
1424                 target_cpu_default="0"
1425                 ;;
1426         *)
1427                 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1428                 ;;
1429         esac
1430         ;;
1431 m68k*-*-openbsd*)
1432         # needed to unconfuse gdb
1433         tm_defines="${tm_defines} OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1434         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1435         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1436         # we need collect2 until our bug is fixed...
1437         use_collect2=yes
1438         ;;
1439 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1440         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1441         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1442         tmake_file=m68k/t-uclinux
1443         use_fixproto=no
1444         ;;
1445 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1446                                 # with ELF format using glibc 2
1447                                 # aka the GNU/Linux C library 6.
1448         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1449         extra_options="${extra_options} m68k/ieee.opt"
1450         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1451         # if not configured with --enable-sjlj-exceptions, bump the
1452         # libgcc version number
1453         if test x$sjlj != x1; then
1454             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1455         fi
1456         ;;
1457 m68k-*-rtems*)
1458         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1459         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1460         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1461         extra_parts="crtbegin.o crtend.o"
1462         ;;
1463 mcore-*-elf)
1464         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1465         tmake_file=mcore/t-mcore
1466         use_fixproto=yes
1467         ;;
1468 mcore-*-pe*)
1469         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1470         tmake_file=mcore/t-mcore-pe
1471         use_fixproto=yes
1472         ;;
1473 mips-sgi-irix[56]*)
1474         tm_file="elfos.h ${tm_file} mips/iris.h"
1475         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1476         target_cpu_default="MASK_ABICALLS"
1477         case ${target} in
1478         *-*-irix5*)
1479                 tm_file="${tm_file} mips/iris5.h"
1480                 ;;
1481
1482         *-*-irix6*)
1483                 tm_file="${tm_file} mips/iris6.h"
1484                 tmake_file="${tmake_file} mips/t-iris6"
1485                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1486                 ;;
1487         esac
1488         if test "x$stabs" = xyes
1489         then
1490                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1491         fi
1492         if test "x$gnu_ld" = xyes
1493         then
1494                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1495         fi
1496 #       if test x$enable_threads = xyes; then
1497 #               thread_file='irix'
1498 #       fi
1499         use_fixproto=yes
1500         ;;
1501 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1502         target_cpu_default="MASK_ABICALLS"
1503         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1504         ;;
1505 mips64*-*-linux*)
1506         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1507         tmake_file="${tmake_file} mips/t-linux64"
1508         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1509         gnu_ld=yes
1510         gas=yes
1511         ;;
1512 mips*-*-linux*)                         # Linux MIPS, either endian.
1513         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1514         case ${target} in
1515         mipsisa32*-*)
1516                 target_cpu_default="MASK_SOFT_FLOAT"
1517                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1518                 ;;
1519         esac
1520         ;;
1521 mips*-*-openbsd*)
1522         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1523         target_cpu_default="MASK_ABICALLS"
1524         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1525         case ${target} in
1526         mips*el-*-openbsd*)
1527             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1528         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1529         esac
1530         ;;
1531 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1532         tm_file="elfos.h ${tm_file} mips/elf.h"
1533         tmake_file=mips/t-isa3264
1534         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1535         use_fixproto=yes
1536         ;;
1537 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1538         tm_file="elfos.h ${tm_file} mips/elf.h"
1539         tmake_file=mips/t-isa3264
1540         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1541         use_fixproto=yes
1542         ;;
1543 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1544         tm_file="elfos.h ${tm_file} mips/elf.h"
1545         tmake_file=mips/t-isa3264
1546         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1547         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1548         use_fixproto=yes
1549         ;;
1550 mipsisa64sr71k-*-elf*)
1551         tm_file="elfos.h ${tm_file} mips/elf.h"
1552         tmake_file=mips/t-sr71k
1553         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1554         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1555         use_fixproto=yes
1556         ;;
1557 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1558         tm_file="elfos.h ${tm_file} mips/elf.h"
1559         tmake_file=mips/t-elf
1560         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1561         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1562         use_fixproto=yes
1563         ;;
1564 mips-*-elf* | mipsel-*-elf*)
1565         tm_file="elfos.h ${tm_file} mips/elf.h"
1566         tmake_file=mips/t-elf
1567         use_fixproto=yes
1568         ;;
1569 mips64-*-elf* | mips64el-*-elf*)
1570         tm_file="elfos.h ${tm_file} mips/elf.h"
1571         tmake_file=mips/t-elf
1572         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1573         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1574         use_fixproto=yes
1575         ;;
1576 mips64vr-*-elf* | mips64vrel-*-elf*)
1577         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1578         tmake_file=mips/t-vr
1579         use_fixproto=yes
1580         ;;
1581 mips64orion-*-elf* | mips64orionel-*-elf*)
1582         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1583         tmake_file=mips/t-elf
1584         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1585         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1586         use_fixproto=yes
1587         ;;
1588 mips*-*-rtems*)
1589         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1590         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1591         ;;
1592 mips-wrs-vxworks)
1593         # We want vxworks.h after mips/elf.h, which unfortunately means we
1594         # have to redo the tm_file list from scratch.
1595         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1596         tmake_file="${tmake_file} mips/t-vxworks"
1597         ;;
1598 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1599         xm_defines=POSIX
1600         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1601         tmake_file="${tmake_file} mips/t-elf"
1602         thread_file=
1603         ;;
1604 mipstx39-*-elf* | mipstx39el-*-elf*)
1605         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1606         tmake_file=mips/t-r3900
1607         use_fixproto=yes
1608         ;;
1609 mmix-knuth-mmixware)
1610         need_64bit_hwint=yes
1611         ;;
1612 mn10300-*-*)
1613         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1614         if test x$stabs = xyes
1615         then
1616                 tm_file="${tm_file} dbx.h"
1617         fi
1618         use_collect2=no
1619         use_fixproto=yes
1620         ;;
1621 mt-*-elf)
1622         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1623         tmake_file="${tmake_file} mt/t-mt"
1624         ;;
1625 ns32k-*-netbsdelf*)
1626         echo "GCC does not yet support the ${target} target"; exit 1
1627         ;;
1628 ns32k-*-netbsd*)
1629         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1630         # On NetBSD, the headers are already okay, except for math.h.
1631         tmake_file="t-netbsd ns32k/t-ns32k"
1632         extra_parts=""
1633         use_collect2=yes
1634         ;;
1635 pdp11-*-bsd)
1636         tm_file="${tm_file} pdp11/2bsd.h"
1637         use_fixproto=yes
1638         ;;
1639 pdp11-*-*)
1640         use_fixproto=yes
1641         ;;
1642 # port not yet contributed
1643 #powerpc-*-openbsd*)
1644 #       tmake_file="${tmake_file} rs6000/t-fprules "
1645 #       extra_headers=
1646 #       ;;
1647 powerpc64-*-linux*)
1648         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1649         test x$with_cpu != x || cpu_is_64bit=yes
1650         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1651         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1652         if test x${enable_secureplt} = xyes; then
1653                 tm_file="rs6000/secureplt.h ${tm_file}"
1654         fi
1655         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1656         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64"
1657         ;;
1658 powerpc64-*-gnu*)
1659         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1660         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1661         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64"
1662         ;;
1663 powerpc-*-beos*)
1664         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1665         tmake_file="rs6000/t-fprules rs6000/t-beos"
1666         extra_headers=
1667         use_fixproto=yes
1668         ;;
1669 powerpc-*-darwin*)
1670         extra_options="${extra_options} rs6000/darwin.opt"
1671         extra_parts="crt2.o"
1672         case ${target} in
1673           *-darwin1[0-9]* | *-darwin[8-9]*)
1674             tmake_file="${tmake_file} rs6000/t-darwin8"
1675             tm_file="${tm_file} rs6000/darwin8.h"
1676             ;;
1677           *-darwin7*)
1678             tm_file="${tm_file} rs6000/darwin7.h"
1679             ;;
1680           *-darwin[0-6]*)
1681             ;;
1682         esac
1683         extra_headers=altivec.h
1684         ;;
1685 powerpc*-*-freebsd*)
1686         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1687         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1688         extra_options="${extra_options} rs6000/sysv4.opt"
1689         ;;
1690 powerpc-*-netbsd*)
1691         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1692         tmake_file="${tmake_file} rs6000/t-netbsd"
1693         extra_options="${extra_options} rs6000/sysv4.opt"
1694         ;;
1695 powerpc-*-chorusos*)
1696         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1697         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1698         extra_options="${extra_options} rs6000/sysv4.opt"
1699         case ${enable_threads} in
1700           yes | posix)
1701             thread_file='posix'
1702             ;;
1703         esac
1704         use_fixproto=yes
1705         ;;
1706 powerpc-*-eabispe*)
1707         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1708         extra_options="${extra_options} rs6000/sysv4.opt"
1709         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1710         ;;
1711 powerpc-*-eabisimaltivec*)
1712         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1713         extra_options="${extra_options} rs6000/sysv4.opt"
1714         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1715         ;;
1716 powerpc-*-eabisim*)
1717         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1718         extra_options="${extra_options} rs6000/sysv4.opt"
1719         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1720         ;;
1721 powerpc-*-elf*)
1722         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1723         extra_options="${extra_options} rs6000/sysv4.opt"
1724         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1725         use_fixproto=yes
1726         ;;
1727 powerpc-*-eabialtivec*)
1728         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1729         extra_options="${extra_options} rs6000/sysv4.opt"
1730         tmake_file="rs6000/t-fprules rs6000/t-ppcendian rs6000/t-ppccomm"
1731         ;;
1732 powerpc-*-eabi*)
1733         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1734         extra_options="${extra_options} rs6000/sysv4.opt"
1735         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1736         ;;
1737 powerpc-*-rtems*)
1738         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1739         extra_options="${extra_options} rs6000/sysv4.opt"
1740         tmake_file="rs6000/t-fprules rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1741         ;;
1742 powerpc-*-linux*altivec*)
1743         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1744         extra_options="${extra_options} rs6000/sysv4.opt"
1745         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1746         ;;
1747 powerpc-*-linux*spe*)
1748         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1749         extra_options="${extra_options} rs6000/sysv4.opt"
1750         tmake_file="rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1751         ;;
1752 powerpc-*-linux*)
1753         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1754         extra_options="${extra_options} rs6000/sysv4.opt"
1755         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1756         case ${enable_targets}:${cpu_is_64bit} in
1757             *powerpc64* | all:* | *:yes)
1758                 if test x$cpu_is_64bit = xyes; then
1759                     tm_file="${tm_file} rs6000/default64.h"
1760                 fi
1761                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1762                 tmake_file="$tmake_file rs6000/t-linux64"
1763                 extra_options="${extra_options} rs6000/linux64.opt"
1764                 ;;
1765             *)
1766                 tm_file="${tm_file} rs6000/linux.h"
1767                 ;;
1768         esac
1769         if test x${enable_secureplt} = xyes; then
1770                 tm_file="rs6000/secureplt.h ${tm_file}"
1771         fi
1772         ;;
1773 powerpc-*-gnu-gnualtivec*)
1774         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1775         extra_options="${extra_options} rs6000/sysv4.opt"
1776         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1777         if test x$enable_threads = xyes; then
1778                 thread_file='posix'
1779         fi
1780         ;;
1781 powerpc-*-gnu*)
1782         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1783         tmake_file="rs6000/t-fprules rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1784         extra_options="${extra_options} rs6000/sysv4.opt"
1785         if test x$enable_threads = xyes; then
1786                 thread_file='posix'
1787         fi
1788         ;;
1789 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1790         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1791         # means we have to redo the tm_file list from scratch.
1792         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1793         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-ppccomm rs6000/t-vxworks"
1794         extra_options="${extra_options} rs6000/sysv4.opt"
1795         extra_headers=ppc-asm.h
1796         case ${target} in
1797           *-vxworksae*)
1798             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
1799             tmake_file="${tmake_file} rs6000/t-vxworksae"
1800             ;;
1801           *-vxworks*)
1802             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
1803             ;;
1804         esac
1805         ;;
1806 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1807         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1808         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1809         extra_options="${extra_options} rs6000/sysv4.opt"
1810         thread_file=""
1811         use_fixproto=yes
1812         ;;
1813 powerpc-*-lynxos*)
1814         xm_defines=POSIX
1815         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1816         tmake_file="t-lynx rs6000/t-lynx"
1817         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1818         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1819         extra_options="${extra_options} lynx.opt"
1820         thread_file=lynx
1821         gnu_ld=yes
1822         gas=yes
1823         ;;
1824 powerpcle-*-sysv*)
1825         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1826         tmake_file="rs6000/t-fprules rs6000/t-ppcos rs6000/t-ppccomm"
1827         extra_options="${extra_options} rs6000/sysv4.opt"
1828         use_fixproto=yes
1829         ;;
1830 powerpcle-*-elf*)
1831         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1832         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1833         extra_options="${extra_options} rs6000/sysv4.opt"
1834         use_fixproto=yes
1835         ;;
1836 powerpcle-*-eabisim*)
1837         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1838         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1839         extra_options="${extra_options} rs6000/sysv4.opt"
1840         ;;
1841 powerpcle-*-eabi*)
1842         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1843         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1844         extra_options="${extra_options} rs6000/sysv4.opt"
1845         ;;
1846 powerpc-*-kaos*)
1847         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1848         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1849         extra_options="${extra_options} rs6000/sysv4.opt"
1850         ;;
1851 powerpcle-*-kaos*)
1852         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1853         tmake_file="rs6000/t-fprules rs6000/t-ppcgas rs6000/t-ppccomm"
1854         extra_options="${extra_options} rs6000/sysv4.opt"
1855         ;;
1856 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1857         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1858         tmake_file="rs6000/t-fprules rs6000/t-newas"
1859         extra_options="${extra_options} rs6000/aix41.opt"
1860         use_collect2=yes
1861         extra_headers=
1862         use_fixproto=yes
1863         ;;
1864 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1865         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1866         tmake_file=rs6000/t-aix43
1867         extra_options="${extra_options} rs6000/aix64.opt"
1868         use_collect2=yes
1869         thread_file='aix'
1870         extra_headers=
1871         ;;
1872 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1873         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1874         extra_options="${extra_options} rs6000/aix64.opt"
1875         tmake_file=rs6000/t-aix43
1876         use_collect2=yes
1877         thread_file='aix'
1878         extra_headers=
1879         ;;
1880 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1881         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1882         tmake_file=rs6000/t-aix52
1883         extra_options="${extra_options} rs6000/aix64.opt"
1884         use_collect2=yes
1885         thread_file='aix'
1886         extra_headers=
1887         ;;
1888 s390-*-linux*)
1889         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1890         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1891         ;;
1892 s390x-*-linux*)
1893         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1894         tm_p_file=s390/s390-protos.h
1895         md_file=s390/s390.md
1896         extra_modes=s390/s390-modes.def
1897         out_file=s390/s390.c
1898         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1899         ;;
1900 s390x-ibm-tpf*)
1901         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1902         tm_p_file=s390/s390-protos.h
1903         md_file=s390/s390.md
1904         extra_modes=s390/s390-modes.def
1905         out_file=s390/s390.c
1906         extra_parts="crtbeginS.o crtendS.o"
1907         tmake_file="s390/t-crtstuff s390/t-tpf"
1908         thread_file='tpf'
1909         extra_options="${extra_options} s390/tpf.opt"
1910         ;;
1911 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1912 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1913   sh-*-linux* | sh[346lbe]*-*-linux* | \
1914   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1915    sh64-*-netbsd* | sh64l*-*-netbsd*)
1916         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1917         if test x${with_endian} = x; then
1918                 case ${target} in
1919                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1920                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1921                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1922                 shl* | sh64l* | sh*-*-linux* | \
1923                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
1924                 sh[1234]*-*-*)                     with_endian=big ;;
1925                 *)                                 with_endian=big,little ;;
1926                 esac
1927         fi
1928         case ${with_endian} in
1929         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1930         big,little|little,big) ;;
1931         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1932         esac
1933         case ${with_endian} in
1934         little*)        tm_file="sh/little.h ${tm_file}" ;;
1935         esac
1936         tm_file="${tm_file} dbxelf.h elfos.h"
1937         case ${target} in
1938         sh*-*-netbsd*)  ;;
1939         *)              tm_file="${tm_file} svr4.h" ;;
1940         esac
1941         tm_file="${tm_file} sh/elf.h"
1942         case ${target} in
1943         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
1944                         tm_file="${tm_file} linux.h sh/linux.h" ;;
1945         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
1946                         ;;
1947         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1948         sh*-superh-elf) if test x$with_libgloss != xno; then
1949                                 with_libgloss=yes
1950                                 tm_file="${tm_file} sh/newlib.h"
1951                         fi
1952                         tm_file="${tm_file} sh/embed-elf.h"
1953                         extra_options="${extra_options} sh/superh.opt" ;;
1954         *)              if test x$with_newlib = xyes \
1955                            && test x$with_libgloss = xyes; then
1956                                 tm_file="${tm_file} sh/newlib.h"
1957                         fi
1958                         tm_file="${tm_file} sh/embed-elf.h" ;;
1959         esac
1960         case ${target} in
1961         sh5*-*-netbsd*)
1962                 # SHmedia, 32-bit ABI
1963                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1964                 ;;
1965         sh64*-netbsd*)
1966                 # SHmedia, 64-bit ABI
1967                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1968                 ;;
1969         *-*-netbsd)
1970                 tmake_file="${tmake_file} sh/t-netbsd"
1971                 ;;
1972         sh64*-*-linux*)
1973                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1974                 tm_file="${tm_file} sh/sh64.h"
1975                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1976                 ;;
1977         sh64*)
1978                 tmake_file="${tmake_file} sh/t-sh64"
1979                 tm_file="${tm_file} sh/sh64.h"
1980                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1981                 ;;
1982         *-*-symbianelf*)
1983                 tmake_file="sh/t-symbian"
1984                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
1985                 extra_objs="symbian.o"
1986                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
1987                 ;;
1988         esac
1989         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
1990         case `echo ${target} | sed 's/e[lb]-/-/'` in
1991         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
1992         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
1993         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
1994         sh4a_single*)           sh_cpu_target=sh4a-single ;;
1995         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
1996         sh4al)                  sh_cpu_target=sh4al ;;
1997         sh4a*)                  sh_cpu_target=sh4a ;;
1998         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
1999         sh4_single*)            sh_cpu_target=sh4-single ;;
2000         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
2001         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
2002         sh3e*)                  sh_cpu_target=sh3e ;;
2003         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2004         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2005         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2006         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2007         sh2a*)                  sh_cpu_target=sh2a ;;
2008         sh2e*)                  sh_cpu_target=sh2e ;;
2009         sh2*)                   sh_cpu_target=sh2 ;;
2010         *)                      sh_cpu_target=sh1 ;;
2011         esac
2012         # did the user say --without-fp ?
2013         if test x$with_fp = xno; then
2014                 case ${sh_cpu_target} in
2015                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2016                 sh4al | sh1)    ;;
2017                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2018                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2019                 sh3*)           sh_cpu_target=sh3 ;;
2020                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2021                 sh2*)           sh_cpu_target=sh2 ;;
2022                 *)      echo --without-fp not available for $target: ignored
2023                 esac
2024                 tm_defines="$tm_defines STRICT_NOFPU=1"
2025         fi
2026         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2027         case $sh_cpu_default in
2028         sh5-64media-nofpu | sh5-64media | \
2029           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2030           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2031           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2032           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
2033           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2034         "")     sh_cpu_default=${sh_cpu_target} ;;
2035         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2036         esac
2037         sh_multilibs=${with_multilib_list}
2038         if test x${sh_multilibs} = x ; then
2039                 case ${target} in
2040                 sh64-superh-linux* | \
2041                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2042                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2043                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2044                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2045                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2046                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2047                 esac
2048                 if test x$with_fp = xno; then
2049                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2050                 fi
2051         fi
2052         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2053         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2054         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2055         for sh_multilib in ${sh_multilibs}; do
2056                 case ${sh_multilib} in
2057                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2058                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
2059                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2060                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2061                 sh5-64media | sh5-64media-nofpu | \
2062                 sh5-32media | sh5-32media-nofpu | \
2063                 sh5-compact | sh5-compact-nofpu)
2064                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2065                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2066                         ;;
2067                 *)
2068                         echo "with_multilib_list=${sh_multilib} not supported."
2069                         exit 1
2070                         ;;
2071                 esac
2072         done
2073         if test x${enable_incomplete_targets} = xyes ; then
2074                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2075         fi
2076         use_fixproto=yes
2077         ;;
2078 sh-*-rtemscoff*)
2079         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2080         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2081         ;;
2082 sh-*-rtems*)
2083         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2084         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2085         ;;
2086 sh-wrs-vxworks)
2087         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2088         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2089         ;;
2090 sh-*-*)
2091         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2092         use_fixproto=yes
2093         ;;
2094 sparc-*-netbsdelf*)
2095         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2096         extra_options="${extra_options} sparc/long-double-switch.opt"
2097         ;;
2098 sparc64-*-openbsd*)
2099         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2100         extra_options="${extra_options} sparc/little-endian.opt"
2101         gas=yes gnu_ld=yes
2102         with_cpu=ultrasparc
2103         ;;
2104 sparc-*-elf*)
2105         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2106         tmake_file="sparc/t-elf sparc/t-crtfm"
2107         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2108         use_fixproto=yes
2109         ;;
2110 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2111         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2112         extra_options="${extra_options} sparc/long-double-switch.opt"
2113         tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2114         ;;
2115 sparc-*-rtems*)
2116         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2117         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2118         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2119         ;;
2120 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2121         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2122         case ${target} in
2123         *-*-solaris2.1[0-9]*)
2124                 tm_file="${tm_file} sol2-10.h"
2125                 ;;
2126         esac
2127         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2128         if test x$gnu_ld = xyes; then
2129                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2130         fi
2131         if test x$gas = xyes; then
2132                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2133         fi
2134         tm_file="${tm_file} tm-dwarf2.h"
2135         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2136         if test x$gnu_ld = xyes; then
2137                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2138         else
2139                 tmake_file="$tmake_file t-slibgcc-sld"
2140         fi
2141         c_target_objs="sol2-c.o"
2142         cxx_target_objs="sol2-c.o"
2143         extra_objs="sol2.o"
2144         tm_p_file="${tm_p_file} sol2-protos.h"
2145         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2146         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2147           "":yes:* | yes:yes:* ) thread_file=posix ;;
2148           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2149         esac
2150         need_64bit_hwint=yes
2151         ;;
2152 sparc-*-solaris2*)
2153         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2154         case ${target} in
2155         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2156                 tm_file="${tm_file} sol2-6.h"
2157                 ;;
2158         *-*-solaris2.1[0-9]*)
2159                 tm_file="${tm_file} sol2-10.h"
2160                 ;;
2161         esac
2162         tm_file="${tm_file} sparc/sol2.h"
2163         if test x$gnu_ld = xyes; then
2164                 tm_file="${tm_file} sparc/sol2-gld.h"
2165         fi
2166         if test x$gas = xyes; then
2167                 tm_file="${tm_file} sparc/sol2-gas.h"
2168         fi
2169         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2170         if test x$gnu_ld = xyes; then
2171                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2172         else
2173                 tmake_file="$tmake_file t-slibgcc-sld"
2174         fi
2175         case ${target} in
2176         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2177                 if test x$gnu_ld = xno; then
2178                         tm_file="${tm_file} sparc/sol26-sld.h"
2179                 fi
2180                 ;;
2181         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2182                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2183                 if test x$gnu_ld = xyes; then
2184                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2185                 fi
2186                 if test x$gas = xyes; then
2187                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2188                 fi
2189                 tm_file="${tm_file} tm-dwarf2.h"
2190                 tmake_file="$tmake_file sparc/t-sol2-64"
2191                 need_64bit_hwint=yes
2192                 test x$with_cpu != x || with_cpu=v9
2193                 ;;
2194         esac
2195         c_target_objs="sol2-c.o"
2196         cxx_target_objs="sol2-c.o"
2197         extra_objs="sol2.o"
2198         tm_p_file="${tm_p_file} sol2-protos.h"
2199         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2200         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2201           "":yes:* | yes:yes:* )
2202                 case ${target} in
2203                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2204                         thread_file=posix95
2205                         ;;
2206                   *)
2207                         thread_file=posix
2208                         ;;
2209                 esac
2210                 ;;
2211           "":*:yes | yes:*:yes )
2212                 thread_file=solaris
2213                 ;;
2214         esac
2215         ;;
2216 sparc-*-sysv4*)
2217         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2218         tmake_file=t-svr4
2219         extra_parts="crtbegin.o crtend.o"
2220         use_fixproto=yes
2221         ;;
2222 sparc64-*-elf*)
2223         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2224         extra_options="${extra_options} sparc/little-endian.opt"
2225         tmake_file="${tmake_file} sparc/t-crtfm"
2226         extra_parts="crtbegin.o crtend.o"
2227         use_fixproto=yes
2228         ;;
2229 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2230         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2231         extra_options="${extra_options} sparc/long-double-switch.opt"
2232         tmake_file="${tmake_file} sparc/t-crtfm"
2233         case "x$with_cpu" in
2234                 xultrasparc) ;;
2235                 x) with_cpu=ultrasparc ;;
2236                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2237         esac
2238         need_64bit_hwint=yes
2239         ;;
2240 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2241         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2242         extra_options="${extra_options} sparc/long-double-switch.opt"
2243         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2244         ;;
2245 sparc64-*-netbsd*)
2246         tm_file="sparc/biarch64.h ${tm_file}"
2247         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2248         extra_options="${extra_options} sparc/long-double-switch.opt"
2249         tmake_file="${tmake_file} sparc/t-netbsd64"
2250         ;;
2251 strongarm-*-elf*)
2252         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2253         tmake_file="arm/t-arm arm/t-strongarm-elf"
2254         out_file=arm/arm.c
2255         md_file=arm/arm.md
2256         extra_modes=arm/arm-modes.def
2257         use_fixproto=yes
2258         ;;
2259 strongarm-*-pe)
2260         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2261         tmake_file="arm/t-arm arm/t-strongarm-pe"
2262         out_file=arm/arm.c
2263         md_file=arm/arm.md
2264         extra_modes=arm/arm-modes.def
2265         extra_options="${extra_options} arm/pe.opt"
2266         extra_objs=pe.o
2267         use_fixproto=yes
2268         ;;
2269 strongarm-*-kaos*)
2270         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2271         tmake_file="arm/t-arm arm/t-strongarm-elf"
2272         out_file=arm/arm.c
2273         md_file=arm/arm.md
2274         extra_modes=arm/arm-modes.def
2275         ;;
2276 v850e1-*-*)
2277         target_cpu_default="TARGET_CPU_v850e1"
2278         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2279         tm_p_file=v850/v850-protos.h
2280         tmake_file=v850/t-v850e
2281         md_file=v850/v850.md
2282         out_file=v850/v850.c
2283         extra_options="${extra_options} v850/v850.opt"
2284         if test x$stabs = xyes
2285         then
2286                 tm_file="${tm_file} dbx.h"
2287         fi
2288         use_collect2=no
2289         c_target_objs="v850-c.o"
2290         cxx_target_objs="v850-c.o"
2291         use_fixproto=yes
2292         ;;
2293 v850e-*-*)
2294         target_cpu_default="TARGET_CPU_v850e"
2295         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2296         tm_p_file=v850/v850-protos.h
2297         tmake_file=v850/t-v850e
2298         md_file=v850/v850.md
2299         out_file=v850/v850.c
2300         extra_options="${extra_options} v850/v850.opt"
2301         if test x$stabs = xyes
2302         then
2303                 tm_file="${tm_file} dbx.h"
2304         fi
2305         use_collect2=no
2306         c_target_objs="v850-c.o"
2307         cxx_target_objs="v850-c.o"
2308         use_fixproto=yes
2309         ;;
2310 v850-*-*)
2311         target_cpu_default="TARGET_CPU_generic"
2312         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2313         tmake_file=v850/t-v850
2314         if test x$stabs = xyes
2315         then
2316                 tm_file="${tm_file} dbx.h"
2317         fi
2318         use_collect2=no
2319         c_target_objs="v850-c.o"
2320         cxx_target_objs="v850-c.o"
2321         use_fixproto=yes
2322         ;;
2323 vax-*-bsd*)                     # VAXen running BSD
2324         tm_file="${tm_file} vax/bsd.h"
2325         tmake_file=vax/t-memfuncs
2326         use_collect2=yes
2327         use_fixproto=yes
2328         ;;
2329 vax-*-sysv*)                    # VAXen running system V
2330         tm_file="${tm_file} vax/vaxv.h"
2331         tmake_file=vax/t-memfuncs
2332         use_fixproto=yes
2333         ;;
2334 vax-*-netbsdelf*)
2335         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2336         ;;
2337 vax-*-netbsd*)
2338         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2339         tmake_file=t-netbsd
2340         extra_parts=""
2341         use_collect2=yes
2342         ;;
2343 vax-*-openbsd*)
2344         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2345         use_collect2=yes
2346         ;;
2347 vax-*-ultrix*)                  # VAXen running ultrix
2348         tm_file="${tm_file} vax/ultrix.h"
2349         tmake_file=vax/t-memfuncs
2350         use_fixproto=yes
2351         ;;
2352 xscale-*-elf)
2353         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2354         tmake_file="arm/t-arm arm/t-xscale-elf"
2355         out_file=arm/arm.c
2356         md_file=arm/arm.md
2357         extra_modes=arm/arm-modes.def
2358         use_fixproto=yes
2359         ;;
2360 xscale-*-coff)
2361         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2362         tmake_file="arm/t-arm arm/t-xscale-coff"
2363         out_file=arm/arm.c
2364         md_file=arm/arm.md
2365         extra_modes=arm/arm-modes.def
2366         use_fixproto=yes
2367         ;;
2368 xstormy16-*-elf)
2369         # For historical reasons, the target files omit the 'x'.
2370         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2371         tm_p_file=stormy16/stormy16-protos.h
2372         md_file=stormy16/stormy16.md
2373         out_file=stormy16/stormy16.c
2374         extra_options=stormy16/stormy16.opt
2375         tmake_file="stormy16/t-stormy16"
2376         extra_parts="crtbegin.o crtend.o"
2377         use_fixproto=yes
2378         ;;
2379 xtensa-*-elf*)
2380         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2381         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2382         ;;
2383 xtensa-*-linux*)
2384         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2385         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2386         ;;
2387 am33_2.0-*-linux*)
2388         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2389         tmake_file="${tmake_file} mn10300/t-linux"
2390         gas=yes gnu_ld=yes
2391         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2392         use_collect2=no
2393         ;;
2394 m32c-*-elf*)
2395         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2396         c_target_objs="m32c-pragma.o"
2397         cxx_target_objs="m32c-pragma.o"
2398         use_fixproto=yes
2399         ;;
2400 *)
2401         echo "*** Configuration ${target} not supported" 1>&2
2402         exit 1
2403         ;;
2404 esac
2405
2406 case ${target} in
2407 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2408         tmake_file="${tmake_file} i386/t-gmm_malloc"
2409         ;;
2410 i[34567]86-*-linux* | x86_64-*-linux*)
2411         tmake_file="${tmake_file} i386/t-pmm_malloc"
2412         ;;
2413 i[34567]86-*-* | x86_64-*-*)
2414         tmake_file="${tmake_file} i386/t-gmm_malloc"
2415         ;;
2416 esac
2417
2418 # Support for --with-cpu and related options (and a few unrelated options,
2419 # too).
2420 case ${with_cpu} in
2421   yes | no)
2422     echo "--with-cpu must be passed a value" 1>&2
2423     exit 1
2424     ;;
2425 esac
2426
2427 # If there is no $with_cpu option, try to infer one from ${target}.
2428 # This block sets nothing except for with_cpu.
2429 if test x$with_cpu = x ; then
2430   case ${target} in
2431     ep9312-*-*)
2432       # A Cirrus ARM variant.
2433       with_cpu="ep9312"
2434       ;;
2435     i386-*-*)
2436       with_cpu=i386
2437       ;;
2438     i486-*-*)
2439       with_cpu=i486
2440       ;;
2441     i586-*-*)
2442       case ${target_noncanonical} in
2443         k6_2-*)
2444           with_cpu=k6-2
2445           ;;
2446         k6_3-*)
2447           with_cpu=k6-3
2448           ;;
2449         k6-*)
2450           with_cpu=k6
2451           ;;
2452         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2453           with_cpu=pentium-mmx
2454           ;;
2455         *)
2456           with_cpu=pentium
2457           ;;
2458       esac
2459       ;;
2460     i686-*-* | i786-*-*)
2461       case ${target_noncanonical} in
2462         k8-*|opteron-*|athlon_64-*)
2463           with_cpu=k8
2464           ;;
2465         athlon_xp-*|athlon_mp-*|athlon_4-*)
2466           with_cpu=athlon-4
2467           ;;
2468         athlon_tbird-*|athlon-*)
2469           with_cpu=athlon
2470           ;;
2471         pentium2-*)
2472           with_cpu=pentium2
2473           ;;
2474         pentium3-*|pentium3m-*)
2475           with_cpu=pentium3
2476           ;;
2477         pentium4-*|pentium4m-*)
2478           with_cpu=pentium4
2479           ;;
2480         prescott-*)
2481           with_cpu=prescott
2482           ;;
2483         nocona-*)
2484           with_cpu=nocona
2485           ;;
2486         pentium_m-*)
2487           with_cpu=pentium-m
2488           ;;
2489         pentiumpro-*)
2490           with_cpu=pentiumpro
2491           ;;
2492         *)
2493           with_cpu=generic
2494           ;;
2495       esac
2496       ;;
2497     x86_64-*-*)
2498       case ${target_noncanonical} in
2499         k8-*|opteron-*|athlon_64-*)
2500           with_cpu=k8
2501           ;;
2502         nocona-*)
2503           with_cpu=nocona
2504           ;;
2505         *)
2506           with_cpu=generic
2507           ;;
2508       esac
2509       ;;
2510     alphaev6[78]*-*-*)
2511       with_cpu=ev67
2512       ;;
2513     alphaev6*-*-*)
2514       with_cpu=ev6
2515       ;;
2516     alphapca56*-*-*)
2517       with_cpu=pca56
2518       ;;
2519     alphaev56*-*-*)
2520       with_cpu=ev56
2521       ;;
2522     alphaev5*-*-*)
2523       with_cpu=ev5
2524       ;;
2525     frv-*-*linux* | frv400-*-*linux*)
2526       with_cpu=fr400
2527       ;;
2528     frv550-*-*linux*)
2529       with_cpu=fr550
2530       ;;
2531     sparc*-*-*)
2532       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2533       ;;
2534   esac
2535 fi
2536
2537 # Similarly for --with-float
2538 if test x$with_float = x; then
2539         case ${target} in
2540         ep9312-*-*)
2541                 with_float=hard
2542                 ;;
2543         esac
2544 fi
2545
2546 # Similarly for --with-schedule.
2547 if test x$with_schedule = x; then
2548         case ${target} in
2549         hppa1* | parisc1*)
2550                 # Override default PA8000 scheduling model.
2551                 with_schedule=7100LC
2552                 ;;
2553         esac
2554 fi
2555
2556 # Validate and mark as valid any --with options supported
2557 # by this target.  In order to use a particular --with option
2558 # you must list it in supported_defaults; validating the value
2559 # is optional.  This case statement should set nothing besides
2560 # supported_defaults.
2561
2562 supported_defaults=
2563 case "${target}" in
2564         alpha*-*-*)
2565                 supported_defaults="cpu tune"
2566                 for which in cpu tune; do
2567                         eval "val=\$with_$which"
2568                         case "$val" in
2569                         "" \
2570                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2571                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2572                         | 21264a)
2573                                 ;;
2574                         *)
2575                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2576                                 exit 1
2577                                 ;;
2578                         esac
2579                 done
2580                 ;;
2581
2582         arm*-*-*)
2583                 supported_defaults="arch cpu float tune fpu abi mode"
2584                 for which in cpu tune; do
2585                         # See if it matches any of the entries in arm-cores.def
2586                         eval "val=\$with_$which"
2587                         if [ x"$val" = x ] \
2588                             || grep "^ARM_CORE(\"$val\"," \
2589                                     ${srcdir}/config/arm/arm-cores.def \
2590                                     > /dev/null; then
2591                           # Ok
2592                           new_val=`grep "^ARM_CORE(\"$val\"," \
2593                                 ${srcdir}/config/arm/arm-cores.def | \
2594                                 sed -e 's/^[^,]*,[      ]*//' | \
2595                                 sed -e 's/,.*$//'`
2596                           eval "target_${which}_cname=$new_val"
2597                         echo "For $val real value is $new_val"
2598                           true
2599                         else
2600                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2601                           exit 1
2602                         fi
2603                 done
2604
2605                 case "$with_arch" in
2606                 "" \
2607                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2608                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2609                 | iwmmxt | ep9312)
2610                         # OK
2611                         ;;
2612                 *)
2613                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2614                         exit 1
2615                         ;;
2616                 esac
2617
2618                 case "$with_float" in
2619                 "" \
2620                 | soft | hard | softfp)
2621                         # OK
2622                         ;;
2623                 *)
2624                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2625                         exit 1
2626                         ;;
2627                 esac
2628
2629                 case "$with_fpu" in
2630                 "" \
2631                 | fpa | fpe2 | fpe3 | maverick | vfp )
2632                         # OK
2633                         ;;
2634                 *)
2635                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2636                         exit 1
2637                         ;;
2638                 esac
2639
2640                 case "$with_abi" in
2641                 "" \
2642                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2643                         #OK
2644                         ;;
2645                 *)
2646                         echo "Unknown ABI used in --with-abi=$with_abi"
2647                         exit 1
2648                         ;;
2649                 esac
2650
2651                 case "$with_mode" in
2652                 "" \
2653                 | arm | thumb )
2654                         #OK
2655                         ;;
2656                 *)
2657                         echo "Unknown mode used in --with-mode=$with_mode"
2658                         exit 1
2659                         ;;
2660                 esac
2661
2662                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2663                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2664                 fi
2665                 ;;
2666
2667         fr*-*-*linux*)
2668                 supported_defaults=cpu
2669                 case "$with_cpu" in
2670                 fr400) ;;
2671                 fr550) ;;
2672                 *)
2673                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2674                         exit 1
2675                         ;;
2676                 esac
2677                 ;;
2678
2679         m68k*-linux*)
2680                 supported_defaults="cpu"
2681                 case "$with_cpu" in
2682                 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2683                         # OK
2684                         ;;
2685                 *)
2686                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2687                         echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2688                         exit 1
2689                         ;;
2690                 esac
2691                 ;;
2692
2693         hppa*-*-* | parisc*-*-*)
2694                 supported_defaults="arch schedule"
2695
2696                 case "$with_arch" in
2697                 "" | 1.0 | 1.1 | 2.0)
2698                         # OK
2699                         ;;
2700                 *)
2701                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2702                         exit 1
2703                         ;;
2704                 esac
2705
2706                 case "$with_schedule" in
2707                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2708                         # OK
2709                         ;;
2710                 *)
2711                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2712                         exit 1
2713                         ;;
2714                 esac
2715                 ;;
2716
2717         i[34567]86-*-* | x86_64-*-*)
2718                 supported_defaults="arch cpu tune"
2719                 for which in arch cpu tune; do
2720                         eval "val=\$with_$which"
2721                         case ${val} in
2722                         i386 | i486 \
2723                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2724                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2725                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2726                         | athlon-4 | athlon-xp | athlon-mp \
2727                         | prescott | pentium-m | pentium4m | pentium3m)
2728                                 case "${target}" in
2729                                   x86_64-*-*)
2730                                       echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2731                                       exit 1
2732                                       ;;
2733                                 esac
2734                                 # OK
2735                                 ;;
2736                         "" | k8 | opteron | athlon64 | athlon-fx | nocona | generic)
2737                                 # OK
2738                                 ;;
2739                         *)
2740                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2741                                 exit 1
2742                                 ;;
2743                         esac
2744                 done
2745                 ;;
2746
2747         mips*-*-*)
2748                 supported_defaults="abi arch float tune divide"
2749
2750                 case ${with_float} in
2751                 "" | soft | hard)
2752                         # OK
2753                         ;;
2754                 *)
2755                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2756                         exit 1
2757                         ;;
2758                 esac
2759
2760                 case ${with_abi} in
2761                 "" | 32 | o64 | n32 | 64 | eabi)
2762                         # OK
2763                         ;;
2764                 *)
2765                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2766                         exit 1
2767                         ;;
2768                 esac
2769
2770                 case ${with_divide} in
2771                 "" | breaks | traps)
2772                         # OK
2773                         ;;
2774                 *)
2775                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2776                         exit 1
2777                 esac
2778                 ;;
2779
2780         mt-*-*)
2781                 supported_defaults="arch"
2782
2783                 case "$with_arch" in
2784                 "" \
2785                 | ms1-64-001 \
2786                 | ms1-16-002 \
2787                 | ms1-16-003 \
2788                 | ms2 \
2789                 | "")
2790                         # OK
2791                         ;;
2792                 *)
2793                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2794                         exit 1
2795                         ;;
2796                 esac
2797                 ;;
2798
2799         powerpc*-*-* | rs6000-*-*)
2800                 supported_defaults="cpu float tune"
2801
2802                 for which in cpu tune; do
2803                         eval "val=\$with_$which"
2804                         case ${val} in
2805                         default32 | default64)
2806                                 with_which="with_$which"
2807                                 eval $with_which=
2808                                 ;;
2809                         405cr)
2810                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2811                                 eval "with_$which=405"
2812                                 ;;
2813                         "" | common \
2814                         | power | power[2345] | powerpc | powerpc64 \
2815                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2816                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2817                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2818                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2819                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2820                                 # OK
2821                                 ;;
2822                         *)
2823                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2824                                 exit 1
2825                                 ;;
2826                         esac
2827                 done
2828                 ;;
2829
2830         s390*-*-*)
2831                 supported_defaults="arch mode tune"
2832
2833                 for which in arch tune; do
2834                         eval "val=\$with_$which"
2835                         case ${val} in
2836                         "" | g5 | g6 | z900 | z990 | z9-109)
2837                                 # OK
2838                                 ;;
2839                         *)
2840                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2841                                 exit 1
2842                                 ;;
2843                         esac
2844                 done
2845
2846                 case ${with_mode} in
2847                 "" | esa | zarch)
2848                         # OK
2849                         ;;
2850                 *)
2851                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2852                         exit 1
2853                         ;;
2854                 esac
2855                 ;;
2856
2857         sh[123456ble]-*-* | sh-*-*)
2858                 supported_defaults="cpu"
2859                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2860                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2861                         # OK
2862                         ;;
2863                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2864                         ;;
2865                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2866                         ;;
2867                 *)
2868                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2869                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2870                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2871                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2872                         exit 1
2873                         ;;
2874                 esac
2875                 ;;
2876         sparc*-*-*)
2877                 supported_defaults="cpu float tune"
2878
2879                 for which in cpu tune; do
2880                         eval "val=\$with_$which"
2881                         case ${val} in
2882                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2883                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2884                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2885                         | v9 | ultrasparc | ultrasparc3 | niagara)
2886                                 # OK
2887                                 ;;
2888                         *)
2889                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2890                                 exit 1
2891                                 ;;
2892                         esac
2893                 done
2894
2895                 case ${with_float} in
2896                 "" | soft | hard)
2897                         # OK
2898                         ;;
2899                 *)
2900                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2901                         exit 1
2902                         ;;
2903                 esac
2904                 ;;
2905
2906         v850*-*-*)
2907                 supported_defaults=cpu
2908                 case ${with_cpu} in
2909                 "" | v850e | v850e1)
2910                         # OK
2911                         ;;
2912                 *)
2913                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2914                         exit 1
2915                         ;;
2916                 esac
2917                 ;;
2918 esac
2919
2920 # Set some miscellaneous flags for particular targets.
2921 target_cpu_default2=
2922 case ${target} in
2923         alpha*-*-*)
2924                 if test x$gas = xyes
2925                 then
2926                         target_cpu_default2="MASK_GAS"
2927                 fi
2928                 ;;
2929
2930         arm*-*-*)
2931                 if test x$target_cpu_cname = x
2932                 then
2933                         target_cpu_default2=TARGET_CPU_generic
2934                 else
2935                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
2936                 fi
2937                 ;;
2938
2939         m68k*-linux*)
2940                 case "x$with_cpu" in
2941                 x)
2942                         # The most generic
2943                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2944                         ;;
2945                 xm68020)
2946                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2947                         ;;
2948                 xm68030)
2949                         target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2950                         ;;
2951                 xm68040)
2952                         target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2953                         ;;
2954                 xm68060)
2955                         target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2956                         ;;
2957                 xm68020-40)
2958                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2959                         ;;
2960                 xm68020-60)
2961                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2962                         ;;
2963                 *)
2964                         echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
2965                         exit 1
2966                         ;;
2967                 esac
2968                 ;;
2969
2970         hppa*-*-* | parisc*-*-*)
2971                 target_cpu_default2="MASK_BIG_SWITCH"
2972                 if test x$gas = xyes
2973                 then
2974                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2975                 fi
2976                 ;;
2977
2978         mips*-*-*)
2979                 if test x$gnu_ld = xyes
2980                 then
2981                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
2982                 fi
2983                 case ${target} in
2984                         mips*el-*-*)
2985                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2986                                 ;;
2987                 esac
2988                 if test "x$enable_gofast" = xyes
2989                 then
2990                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2991                         tmake_file="mips/t-gofast $tmake_file"
2992                 else
2993                         tmake_file="mips/t-mips $tmake_file"
2994                 fi
2995                 ;;
2996
2997         powerpc*-*-* | rs6000-*-*)
2998                 # FIXME: The PowerPC port uses the value set at compile time,
2999                 # although it's only cosmetic.
3000                 if test "x$with_cpu" != x
3001                 then
3002                         target_cpu_default2="\\\"$with_cpu\\\""
3003                 fi
3004                 out_file=rs6000/rs6000.c
3005                 c_target_objs="${c_target_objs} rs6000-c.o"
3006                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3007                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3008
3009                 if test x$enable_e500_double = xyes
3010                 then
3011                         tm_file="$tm_file rs6000/e500-double.h"
3012                 fi
3013                 ;;
3014
3015         sh[123456ble]*-*-* | sh-*-*)
3016                 c_target_objs="${c_target_objs} sh-c.o"
3017                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3018                 ;;
3019
3020         sparc*-*-*)
3021                 # Some standard aliases.
3022                 case x$with_cpu in
3023                 xsparc)
3024                         with_cpu=v7
3025                         ;;
3026                 xsparcv9 | xsparc64)
3027                         with_cpu=v9
3028                         ;;
3029                 esac
3030
3031                 # The SPARC port checks this value at compile-time.
3032                 target_cpu_default2="TARGET_CPU_$with_cpu"
3033                 ;;
3034         v850*-*-*)
3035                 # FIXME: The v850 is "special" in that it does not support
3036                 # runtime CPU selection, only --with-cpu.
3037                 case "x$with_cpu" in
3038                 x)
3039                         ;;
3040                 xv850e)
3041                         target_cpu_default2="TARGET_CPU_$with_cpu"
3042                         ;;
3043                 esac
3044                 ;;
3045 esac
3046
3047 t=
3048 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3049 for option in $all_defaults
3050 do
3051         eval "val=\$with_$option"
3052         if test -n "$val"; then
3053                 case " $supported_defaults " in
3054                 *" $option "*)
3055                         ;;
3056                 *)
3057                         echo "This target does not support --with-$option." 2>&1
3058                         echo "Valid --with options are: $supported_defaults" 2>&1
3059                         exit 1
3060                         ;;
3061                 esac
3062
3063                 if test "x$t" = x
3064                 then
3065                         t="{ \"$option\", \"$val\" }"
3066                 else
3067                         t="${t}, { \"$option\", \"$val\" }"
3068                 fi
3069         fi
3070 done
3071
3072 if test "x$t" = x
3073 then
3074         configure_default_options="{ { NULL, NULL} }"
3075 else
3076         configure_default_options="{ ${t} }"
3077 fi
3078
3079 if test "$target_cpu_default2" != ""
3080 then
3081         if test "$target_cpu_default" != ""
3082         then
3083                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3084         else
3085                 target_cpu_default=$target_cpu_default2
3086         fi
3087 fi