vectorizer cost model enhancement
[official-gcc.git] / gcc / domwalk.c
blobbffa4aa485166c4c8cebf3a05535f97078266bb0
1 /* Generic dominator tree walker
2 Copyright (C) 2003-2013 Free Software Foundation, Inc.
3 Contributed by Diego Novillo <dnovillo@redhat.com>
5 This file is part of GCC.
7 GCC is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3, or (at your option)
10 any later version.
12 GCC is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with GCC; see the file COPYING3. If not see
19 <http://www.gnu.org/licenses/>. */
21 #include "config.h"
22 #include "system.h"
23 #include "coretypes.h"
24 #include "tm.h"
25 #include "basic-block.h"
26 #include "domwalk.h"
27 #include "sbitmap.h"
29 /* This file implements a generic walker for dominator trees.
31 To understand the dominator walker one must first have a grasp of dominators,
32 immediate dominators and the dominator tree.
34 Dominators
35 A block B1 is said to dominate B2 if every path from the entry to B2 must
36 pass through B1. Given the dominance relationship, we can proceed to
37 compute immediate dominators. Note it is not important whether or not
38 our definition allows a block to dominate itself.
40 Immediate Dominators:
41 Every block in the CFG has no more than one immediate dominator. The
42 immediate dominator of block BB must dominate BB and must not dominate
43 any other dominator of BB and must not be BB itself.
45 Dominator tree:
46 If we then construct a tree where each node is a basic block and there
47 is an edge from each block's immediate dominator to the block itself, then
48 we have a dominator tree.
51 [ Note this walker can also walk the post-dominator tree, which is
52 defined in a similar manner. i.e., block B1 is said to post-dominate
53 block B2 if all paths from B2 to the exit block must pass through
54 B1. ]
56 For example, given the CFG
61 / \
62 3 4
63 / \
64 +---------->5 6
65 | / \ /
66 | +--->8 7
67 | | / |
68 | +--9 11
69 | / |
70 +--- 10 ---> 12
73 We have a dominator tree which looks like
78 / \
79 / \
80 3 4
81 / / \ \
82 | | | |
83 5 6 7 12
84 | |
85 8 11
93 The dominator tree is the basis for a number of analysis, transformation
94 and optimization algorithms that operate on a semi-global basis.
96 The dominator walker is a generic routine which visits blocks in the CFG
97 via a depth first search of the dominator tree. In the example above
98 the dominator walker might visit blocks in the following order
99 1, 2, 3, 4, 5, 8, 9, 10, 6, 7, 11, 12.
101 The dominator walker has a number of callbacks to perform actions
102 during the walk of the dominator tree. There are two callbacks
103 which walk statements, one before visiting the dominator children,
104 one after visiting the dominator children. There is a callback
105 before and after each statement walk callback. In addition, the
106 dominator walker manages allocation/deallocation of data structures
107 which are local to each block visited.
109 The dominator walker is meant to provide a generic means to build a pass
110 which can analyze or transform/optimize a function based on walking
111 the dominator tree. One simply fills in the dominator walker data
112 structure with the appropriate callbacks and calls the walker.
114 We currently use the dominator walker to prune the set of variables
115 which might need PHI nodes (which can greatly improve compile-time
116 performance in some cases).
118 We also use the dominator walker to rewrite the function into SSA form
119 which reduces code duplication since the rewriting phase is inherently
120 a walk of the dominator tree.
122 And (of course), we use the dominator walker to drive our dominator
123 optimizer, which is a semi-global optimizer.
125 TODO:
127 Walking statements is based on the block statement iterator abstraction,
128 which is currently an abstraction over walking tree statements. Thus
129 the dominator walker is currently only useful for trees. */
131 static int *bb_postorder;
133 static int
134 cmp_bb_postorder (const void *a, const void *b)
136 basic_block bb1 = *(basic_block *)const_cast<void *>(a);
137 basic_block bb2 = *(basic_block *)const_cast<void *>(b);
138 if (bb1->index == bb2->index)
139 return 0;
140 /* Place higher completion number first (pop off lower number first). */
141 if (bb_postorder[bb1->index] > bb_postorder[bb2->index])
142 return -1;
143 return 1;
146 /* Recursively walk the dominator tree.
147 BB is the basic block we are currently visiting. */
149 void
150 dom_walker::walk (basic_block bb)
152 basic_block dest;
153 basic_block *worklist = XNEWVEC (basic_block, n_basic_blocks * 2);
154 int sp = 0;
155 int *postorder, postorder_num;
157 if (dom_direction_ == CDI_DOMINATORS)
159 postorder = XNEWVEC (int, n_basic_blocks);
160 postorder_num = inverted_post_order_compute (postorder);
161 bb_postorder = XNEWVEC (int, last_basic_block);
162 for (int i = 0; i < postorder_num; ++i)
163 bb_postorder[postorder[i]] = i;
164 free (postorder);
167 while (true)
169 /* Don't worry about unreachable blocks. */
170 if (EDGE_COUNT (bb->preds) > 0
171 || bb == ENTRY_BLOCK_PTR
172 || bb == EXIT_BLOCK_PTR)
174 /* Callback for subclasses to do custom things before we have walked
175 the dominator children, but before we walk statements. */
176 before_dom_children (bb);
178 /* Mark the current BB to be popped out of the recursion stack
179 once children are processed. */
180 worklist[sp++] = bb;
181 worklist[sp++] = NULL;
183 int saved_sp = sp;
184 for (dest = first_dom_son (dom_direction_, bb);
185 dest; dest = next_dom_son (dom_direction_, dest))
186 worklist[sp++] = dest;
187 if (dom_direction_ == CDI_DOMINATORS)
188 switch (sp - saved_sp)
190 case 0:
191 case 1:
192 break;
193 default:
194 qsort (&worklist[saved_sp], sp - saved_sp,
195 sizeof (basic_block), cmp_bb_postorder);
198 /* NULL is used to mark pop operations in the recursion stack. */
199 while (sp > 0 && !worklist[sp - 1])
201 --sp;
202 bb = worklist[--sp];
204 /* Callback allowing subclasses to do custom things after we have
205 walked dominator children, but before we walk statements. */
206 after_dom_children (bb);
208 if (sp)
209 bb = worklist[--sp];
210 else
211 break;
213 if (dom_direction_ == CDI_DOMINATORS)
215 free (bb_postorder);
216 bb_postorder = NULL;
218 free (worklist);