1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 CONFIG_LANGUAGES
= @all_languages@
43 LANGUAGES
= c proto gcov
$(exeext
) $(CONFIG_LANGUAGES
)
45 # Selection of languages to be made during stage1 build.
46 # This is overridden by configure.
47 BOOT_LANGUAGES
= c @all_boot_languages@
53 # Various ways of specifying flags for compilations:
54 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
55 # BOOT_CFLAGS is the value of CFLAGS to pass
56 # to the stage2 and stage3 compilations
57 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
58 # (And for stage 1 if the native compiler is GCC.) It is
59 # separate from BOOT_CFLAGS because people tend to override optimization
60 # flags and we'd like them to still have warnings turned on. They are free
61 # to explicitly turn warnings off if they wish.
62 # XCFLAGS is used for most compilations but not when using the GCC just built.
63 # TCFLAGS is used for compilations with the GCC just built.
66 CFLAGS
= -g @stage1_warn_cflags@
67 BOOT_CFLAGS
= -O2
$(CFLAGS
)
68 WARN_CFLAGS
= -W
-Wall
69 # These exists to be overridden by the x-* and t-* files, respectively.
78 # srcdir might be a relative pathname which won't be valid in a subdirectory,
79 # so we must use objdir/srcdir instead to make it safe. objdir is always
81 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
82 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
83 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
84 esac; else echo bison ; fi`
86 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
93 # on sysV, define this as cp.
95 # Some systems may be missing symbolic links, regular links, or both.
96 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
99 # These permit overriding just for certain files.
100 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
101 INSTALL_DATA
= @INSTALL_DATA@
105 # For GNUmake: let us decide what gets passed to recursive makes.
109 # Define this as & to perform parallel make on a Sequent.
110 # Note that this has some bugs, and it seems currently necessary
111 # to compile all the gen* files first by hand to avoid erroneous results.
114 # How to invoke ranlib.
116 # Test to use to see whether ranlib exists on the system.
119 ||
( [ "$(host_canonical)" = "$(target)" ] \
120 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
122 # Compiler to use for compiling libgcc1.a.
123 # OLDCC should not be the GNU C compiler,
124 # since that would compile typical libgcc1.a functions such as mulsi3
125 # into infinite recursions.
128 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
129 # NOTE: -O does not work on some Unix systems!
132 # Version of ar to use when compiling libgcc1.a.
136 # Target to use when installing include directory. Either
137 # install-headers-tar or install-headers-cpio.
138 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
140 # Header files that are made available under the same name
141 # to programs compiled with GCC.
142 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
143 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
144 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
145 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
146 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-mn10200.h \
147 $(srcdir)/ginclude
/va-mn10300.h
$(srcdir)/ginclude
/va-pa.h \
148 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
149 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
150 $(srcdir)/ginclude
/va-m32r.h
$(srcdir)/ginclude
/va-sh.h \
151 $(srcdir)/ginclude
/va-v850.h
$(srcdir)/ginclude
/va-arc.h \
152 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
153 $(srcdir)/ginclude
/va-c4x.h
$(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
) \
154 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/stdbool.h
156 # Target to use whe installing assert.h. Some systems may
157 # want to set this empty.
158 INSTALL_ASSERT_H
= install-assert-h
160 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
161 # Usually the one we just built.
162 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
163 GCC_FOR_TARGET
= .
/xgcc
-B.
/ -B
$(build_tooldir
)/bin
/
165 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
166 # It omits XCFLAGS, and specifies -B./.
167 # It also specifies -I./include to find, e.g., stddef.h.
168 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
170 # Sed command to transform gcc to installed name. Overwritten by configure.
171 program_transform_name
= @program_transform_name@
172 program_transform_cross_name
= s
,^
,$(target_alias
)-,
174 build_canonical
= @build_canonical@
175 host_canonical
= @host_canonical@
177 # Tools to use when building a cross-compiler.
178 # These are used because `configure' appends `cross-make'
179 # to the makefile when making a cross-compiler.
181 # Use the tools from the build tree, if they are available.
183 # objdir is set by configure.
187 if [ -f $(objdir)/../binutils/ar ] ; then \
188 echo $(objdir)/../binutils/ar ; \
190 if [ "$(host_canonical)" = "$(target)" ] ; then \
193 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
196 AR_FLAGS_FOR_TARGET
= rc
197 RANLIB_FOR_TARGET
= ` \
198 if [ -f $(objdir)/../binutils/ranlib ] ; then \
199 echo $(objdir)/../binutils/ranlib ; \
201 if [ "$(host_canonical)" = "$(target)" ] ; then \
204 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
207 RANLIB_TEST_FOR_TARGET
= \
208 [ -f
$(RANLIB_FOR_TARGET
) ] \
209 ||
( [ "$(host_canonical)" = "$(target)" ] \
210 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
212 # Dir to search for system headers. Overridden by cross-make.
213 SYSTEM_HEADER_DIR
= /usr
/include
215 # Control whether to run fixproto.
216 STMP_FIXPROTO
= stmp-fixproto
218 # Test to see whether <limits.h> exists in the system header files.
219 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
221 # There may be a premade insn-attrtab.c for this machine.
222 # (You could rebuild it with genattrtab as usual, but it takes a long time.)
223 # PREMADE_ATTRTAB is the file name of the file to use.
224 # PREMADE_ATTRTAB_MD is the md file it corresponds to.
225 PREMADE_ATTRTAB_MD
= Makefile
# Guaranteed not to cmp equal to md.
229 target_alias
=@target_alias@
230 xmake_file
=@dep_host_xmake_file@
231 tmake_file
=@dep_tmake_file@
232 out_file
=$(srcdir)/config
/@out_file@
233 out_object_file
=@out_object_file@
234 md_file
=$(srcdir)/config
/@md_file@
235 tm_file
=@tm_file_list@
236 build_xm_file
=@build_xm_file_list@
237 host_xm_file
=@host_xm_file_list@
238 lang_specs_files
=@lang_specs_files@
239 lang_options_files
=@lang_options_files@
240 lang_tree_files
=@lang_tree_files@
241 GCC_THREAD_FILE
=@thread_file@
242 OBJC_BOEHM_GC
=@objc_boehm_gc@
244 GTHREAD_FLAGS
=@gthread_flags@
245 # Be prepared for gcc2 merges.
246 gcc_version
=@gcc_version@
247 gcc_version_trigger
=@gcc_version_trigger@
248 version
=$(gcc_version
)
249 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
251 # Common prefix for installation directories.
252 # NOTE: This directory must exist when you start installation.
254 # Directory in which to put localized header files. On the systems with
255 # gcc as the native cc, `local_prefix' may not be `prefix' which is
257 # NOTE: local_prefix *should not* default from prefix.
258 local_prefix
= @local_prefix@
259 # Directory in which to put host dependent programs and libraries
260 exec_prefix = @
exec_prefix@
261 # Directory in which to put the executable for the command `gcc'
263 # Directory in which to put the directories used by the compiler.
265 # Directory in which the compiler finds executables, libraries, etc.
266 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
267 # Used to produce a relative $(gcc_tooldir) in gcc.o
268 unlibsubdir
= ..
/..
/..
269 # Directory in which to find other cross-compilation tools and headers.
270 # Used in install-cross.
271 gcc_tooldir
= @gcc_tooldir@
272 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
273 build_tooldir
= $(exec_prefix)/$(target_alias
)
274 # Directory in which the compiler finds g++ includes.
275 gxx_include_dir
= @gxx_include_dir@
276 # Directory to search for site-specific includes.
277 includedir = $(local_prefix
)/include
278 # assertdir is overridden in cross-make.
279 # (But this currently agrees with what is in cross-make.)
280 assertdir
= $(gcc_tooldir
)/include
281 # where the info files go
283 # where the locale files go
284 datadir = $(prefix)/@DATADIRNAME@
285 localedir
= $(datadir)/locale
286 # Extension (if any) to put in installed man-page filename.
289 exeext
= @host_exeext@
290 build_exeext
= @build_exeext@
292 # Directory in which to put man pages.
294 man1dir = $(mandir)/man1
295 # Dir for temp files.
298 # Top build directory, relative to here.
301 # Whether we were configured with NLS.
304 # Internationalization library.
305 INTLLIBS
= @INTLLIBS@
307 # List of internationalization subdirectories.
309 INTL_SUBDIRS
= intl
$(POSUB
)
311 # Additional system libraries to link with.
314 # Change this to a null string if obstacks are installed in the
318 # Configure will set these if you need vfprintf and possibly _doprnt support.
322 # Specify the rule for actually making libgcc.a,
324 # and the rule for installing it.
325 INSTALL_LIBGCC
= install-libgcc
327 # Specify the rule for actually making libgcc1.a.
328 # The value may be empty; that means to do absolutely nothing
329 # with or for libgcc1.a.
332 # Specify the rule for making libgcc1.a for a cross-compiler.
333 # The default rule assumes that libgcc1.a is supplied by the user.
334 CROSS_LIBGCC1
= libgcc1.cross
336 # Specify the rule for actually making libgcc2.a.
339 # Options to use when compiling libgcc2.a.
340 # -g1 causes output of debug info only for file-scope entities.
341 # we use this here because that should be enough, and also
342 # so that -g1 will be tested.
344 LIBGCC2_DEBUG_CFLAGS
= -g1
345 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
347 # Additional options to use when compiling libgcc2.a.
348 # Some targets override this to -Iinclude
351 # Additional target-dependent options for compiling libgcc2.a.
352 TARGET_LIBGCC2_CFLAGS
=
354 # Things which must be built before building libgcc2.a.
355 # Some targets override this to stmp-int-hdrs
358 # libgcc1-test target (must also be overridable for a target)
359 LIBGCC1_TEST
= libgcc1-test
361 # List of extra executables that should be compiled for this target machine
362 # that are used for compiling from source code to object code.
363 # The rules for compiling them should be in the t-* file for the machine.
364 EXTRA_PASSES
=@extra_passes@
366 # Like EXTRA_PASSES, but these are used when linking.
367 EXTRA_PROGRAMS
= @extra_programs@
369 # List of extra object files that should be compiled for this target machine.
370 # The rules for compiling them should be in the t-* file for the machine.
371 EXTRA_PARTS
= @extra_parts@
373 # List of extra object files that should be compiled and linked with
374 # compiler proper (cc1, cc1obj, cc1plus).
375 EXTRA_OBJS
= @extra_objs@
377 # List of extra object files that should be compiled and linked with
379 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
381 # List of additional header files to install.
382 # Often this is edited directly by `configure'.
383 EXTRA_HEADERS
=@extra_headers_list@
385 # Set this to `collect2' to enable use of collect2.
386 USE_COLLECT2
= @will_use_collect2@
387 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
388 # It is convenient for configure to add the assignment at the beginning,
389 # so don't override it here.
390 USE_COLLECT2
= collect2
$(exeext
)
392 # List of extra C and assembler files to add to libgcc1.a.
393 # Assembler files should have names ending in `.asm'.
396 # List of extra C and assembler files to add to libgcc2.a.
397 # Assembler files should have names ending in `.asm'.
400 # Default float.h source to use for cross-compiler.
401 # This is overridden by configure.
402 CROSS_FLOAT_H
=$(srcdir)/config
/float-@float_format@.h
404 # We do not try to build float.h anymore. Let configure select the
405 # appropriate pre-built float.h file for the target.
406 FLOAT_H
=$(srcdir)/config
/float-@float_format@.h
408 # Program to convert libraries.
411 # Control whether header files are installed.
412 INSTALL_HEADERS
=install-headers
414 # Options for tar when copying trees. So HPUX can override it.
417 # Select which version of fixincludes to use (I.E. regular versus SVR4)
418 # This value is overridden directly by configure.
419 FIXINCLUDES
= @fixincludes@
421 # Additional directories of header files to run fixincludes on.
422 # These should be directories searched automatically by default
423 # just as /usr/include is.
424 # *Do not* use this for directories that happen to contain
425 # header files, but are not searched automatically by default.
426 # On most systems, this is empty.
427 OTHER_FIXINCLUDES_DIRS
=
429 # A list of all the language-specific executables.
430 # This is overridden by configure.
431 COMPILERS
= cc1
$(exeext
) @all_compilers@
433 # List of things which should already be built whenever we try to use xgcc
434 # to compile anything (without linking).
435 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
437 # List of things which should already be built whenever we try to use xgcc
439 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
441 # Directory to link to, when using the target `maketest'.
444 # Guaranteed to not exist when not passing md through cpp.
445 # This value is overridden directly by configure.
446 MD_FILE
= md-cpp-not-used
448 # Flags to use when cross-building GCC.
449 # Prefix to apply to names of object files when using them
450 # to run on the machine we are compiling on.
452 # Prefix to apply to names of object files when compiling them
453 # to run on the machine we are compiling on.
454 # The default for this variable is chosen to keep these rules
455 # out of the way of the other rules for compiling the same source files.
458 HOST_CFLAGS
=$(ALL_CFLAGS
)
460 HOST_INTLLIBS
=$(INTLLIBS
)
461 HOST_LDFLAGS
=$(LDFLAGS
)
462 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
463 HOST_ALLOCA
=$(ALLOCA
)
464 HOST_MALLOC
=$(MALLOC
)
465 HOST_OBSTACK
=$(OBSTACK
)
466 HOST_VFPRINTF
=$(VFPRINTF
)
467 HOST_DOPRINT
=$(DOPRINT
)
469 # Actual name to use when installing a native compiler.
470 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
471 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
472 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
473 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
475 # Actual name to use when installing a cross-compiler.
476 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
477 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
478 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
480 # Choose the real default target.
483 # Choose the real install target.
484 INSTALL_TARGET
=install-normal
486 # Setup the testing framework, if you have one
487 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
488 echo $${rootme}/../expect/expect ; \
489 else echo expect ; fi`
491 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
492 echo $${srcdir}/../dejagnu/runtest ; \
493 else echo runtest; fi`
496 # Extra symbols for fixproto to define when parsing headers.
499 # Extra flags to use when compiling crt{begin,end}.o.
502 # Extra flags to use when compiling [m]crt0.o.
505 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
508 # End of variables for you to override.
510 # Definition of `all' is here so that new rules inserted by sed
511 # do not specify the default target.
512 # The real definition is under `all.internal' (for native compilers)
513 # or `all.cross' (for cross compilers).
516 # This tells GNU Make version 3 not to put all variables in the environment.
519 # sed inserts variable overrides after the following line.
533 # Now figure out from those variables how to compile and link.
537 # IN_GCC tells various files that system.h, toplev.c, etc are available.
538 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC
$(SCHED_CFLAGS
) @extra_c_flags@
540 # This is the variable actually used when we compile.
541 # If you change this line, you probably also need to change the definition
542 # of HOST_CFLAGS in build-make to match.
543 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
547 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
549 # Even if ALLOCA is set, don't use it if compiling with GCC.
550 USE_ALLOCA
= ${ALLOCA}
551 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
552 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
553 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
554 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
555 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
557 # Dependency on obstack, alloca, malloc or whatever library facilities
558 # are not installed in the system libraries.
559 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
560 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
562 # Likewise, for use in the tools that must run on this machine
563 # even if we are cross-building GCC.
564 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
565 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
567 # How to link with both our special library facilities
568 # and the system's installed libraries.
569 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
571 # Likewise, for use in the tools that must run on this machine
572 # even if we are cross-building GCC.
573 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
574 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
577 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
578 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
579 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
581 # Specify the directories to be searched for header files.
582 # Both . and srcdir are used, in that order,
583 # so that tm.h and config.h will be found in the compilation
584 # subdirectory rather than in the source directory.
585 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
587 # Always use -I$(srcdir)/config when compiling.
589 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
591 # This tells GNU make version 3 not to export all the variables
592 # defined in this file into the environment.
595 # Support for additional languages (other than c and objc).
596 # ??? objc can be supported this way too (leave for later).
598 # These next lines are overridden by configure.
599 LANG_MAKEFILES
= @all_lang_makefiles@
600 LANG_STAGESTUFF
= @all_stagestuff@
601 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
602 LANG_LIB2FUNCS
= @all_lib2funcs@
603 LANG_EXTRA_HEADERS
= @all_headers@
605 # Flags to pass to recursive makes.
606 # CC is set by configure. Hosts without symlinks need special handling
607 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
609 # ??? The choices here will need some experimenting with.
611 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
612 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
614 "BISONFLAGS=$(BISONFLAGS)" \
615 "CC=@cc_set_by_configure@" \
618 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
619 "LDFLAGS=$(LDFLAGS)" \
621 "LEXFLAGS=$(LEXFLAGS)" \
624 "MAKEINFO=$(MAKEINFO)" \
625 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
626 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
627 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
629 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
631 "build_exeext=$(build_exeext)" \
633 "exec_prefix=$(exec_prefix)" \
635 "local_prefix=$(local_prefix)" \
636 "gxx_include_dir=$(gxx_include_dir)" \
637 "tooldir=$(tooldir)" \
638 "gcc_tooldir=$(gcc_tooldir)" \
640 "libsubdir=$(libsubdir)" \
641 "datadir=$(datadir)" \
642 "distdir=../tmp/\$$(subdir)" \
643 "localedir=$(localedir)"
645 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
646 -e
's|^ *[^ /][^ /]*/|%&|' \
648 -e
's|% *[^- /]|%&|g' \
651 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
652 "CC=`echo @cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
654 # Lists of files for various purposes.
656 # Language-specific object files for C and Objective C.
657 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
658 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
660 # Language-specific object files for C.
661 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
663 SCHED_PREFIX
= @sched_prefix@
664 SCHED_CFLAGS
= @sched_cflags@
666 # Language-independent object files.
667 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
668 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
669 intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o \
670 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
671 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
672 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
673 insn-peep.o reorg.o
$(SCHED_PREFIX
)sched.o final.o recog.o reg-stack.o \
674 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
675 profile.o insn-attrtab.o
$(out_object_file
) getpwd.o
$(EXTRA_OBJS
) convert.o \
676 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o
678 # GEN files are listed separately, so they can be built before doing parallel
679 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
680 # them before rtl.o is compiled.
681 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
682 genpeep gengenrtl gencheck
686 # Files to be copied away after each stage in building.
687 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
688 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
689 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
690 s-flags s-config s-codes s-mlib s-under\
691 s-output s-recog s-emit s-extract s-peep s-check \
692 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
693 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
694 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
695 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
696 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
697 gencheck
$(build_exeext
) \
698 xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
699 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
700 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
701 protoize
$(exeext
) unprotoize
$(exeext
) \
702 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
704 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
705 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse \
709 # Members of libgcc1.a.
710 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
711 _lshrsi3 _ashrsi3 _ashlsi3 \
712 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
713 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
714 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
715 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
716 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
718 # Library members defined in libgcc2.c.
719 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
720 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
721 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
722 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
723 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
724 _fixtfdi _fixunstfdi _floatditf \
725 __gcc_bcmp _varargs __dummy _eprintf \
726 _bb _shtab _clear_cache _trampoline __main _exit \
731 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
732 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
733 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
736 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
737 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
738 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
741 # The files that "belong" in CONFIG_H are deliberately omitted
742 # because having them there would not be useful in actual practice.
743 # All they would do is cause complete recompilation every time
744 # one of the machine description files is edited.
745 # That may or may not be what one wants to do.
746 # If it is, rm *.o is an easy way to do it.
747 # CONFIG_H = $(host_xm_file) $(tm_file)
749 RTL_BASE_H
= rtl.h rtl.def machmode.h machmode.def
750 RTL_H
= $(RTL_BASE_H
) genrtl.h
751 TREE_H
= tree.h real.h tree.def machmode.h machmode.def tree-check.h
752 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h
753 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
755 EXPR_H
= expr.h insn-codes.h
756 REGS_H
= regs.h varray.h machmode.h machmode.def
758 # Language makefile fragments.
760 # The following targets define the interface between us and the languages.
762 # all.build, all.cross, start.encap, rest.encap,
764 # install-normal, install-common, install-info, install-man,
765 # uninstall, distdir,
766 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
767 # stage1, stage2, stage3, stage4
769 # Each language is linked in with a series of hooks (since we can't use `::'
770 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
771 # Configure computes and adds these here.
776 # sed inserts language fragments after the following line.
777 ####language fragments
780 # End of language makefile fragments.
782 # The only suffixes we want for implicit rules are .c and .o, so clear
783 # the list and add them. This speeds up GNU Make, and allows -r to work.
787 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
788 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
789 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
790 "$(xmake_file)" "$(tmake_file)"
791 cp config.status config.run
792 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
795 $(srcdir)/configure
: $(srcdir)/configure.in
796 cd
$(srcdir); autoconf
798 # cstamp-h.in controls rebuilding of config.in.
799 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
800 # delete it. A stamp file is needed as autoheader won't update the file if
801 # nothing has changed.
802 # It remains in the source directory and is part of the distribution.
803 # This follows what is done in shellutils, fileutils, etc.
804 # "echo timestamp" is used instead of touch to be consistent with other
805 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
806 # ??? Newer versions have a maintainer mode that may be useful here.
807 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
808 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
809 cd
$(srcdir) && autoheader
810 @
rm -f
$(srcdir)/cstamp-h.in
811 echo timestamp
> $(srcdir)/cstamp-h.in
812 auto-host.h
: cstamp-h
; @true
813 cstamp-h
: config.in config.status
814 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
816 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
817 # a target to build even if it is up-to-date. So we must verify that
818 # config.status does not exist before failing.
819 config.status
: configure version.c
820 @if
[ ! -f config.status
] ; then \
821 echo You must configure gcc. Look at the INSTALL file for details.
; \
824 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
827 all.internal
: start.encap rest.encap
828 # This is what to compile if making a cross-compiler.
829 # Note that we can compile enquire using the cross-compiler just built,
830 # although we can't run it on this machine.
831 all.cross
: native gcc-cross specs stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) \
832 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross
833 # This is what to compile if making gcc with a cross-compiler.
834 all.build
: native xgcc
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
835 # This is what must be made before installing GCC and converting libraries.
836 start.encap
: native xgcc
$(exeext
) specs
$(LIBGCC1
) xlimits.h lang.start.encap
837 # These can't be made until after GCC can run.
838 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
839 # This is what is made with the host's compiler
840 # whether making a cross compiler or not.
841 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
842 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
844 # Define the names for selecting languages in LANGUAGES.
848 # Tell GNU make these are phony targets.
849 .PHONY
: C c PROTO proto
851 # On the target machine, finish building a cross compiler.
852 # This does the things that can't be done on the host machine.
853 rest.cross
: $(LIBGCC
) gfloat.h specs
855 # Verify that it works to compile and link libgcc1-test.
856 # If it does, then there are sufficient replacements for libgcc1.a.
857 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
858 @echo
"Testing libgcc1. Ignore linker warning messages."
859 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
860 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
861 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
862 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
864 # Recompile all the language-independent object files.
865 # This is used only if the user explicitly asks for it.
866 compilations
: ${OBJS}
868 # Create a list of the language-independent object files so the language
869 # subdirectories needn't mention their names explicitly.
870 stamp-objlist
: $(OBJS
)
871 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
873 # We call this executable `xgcc' rather than `gcc'
874 # to avoid confusion if the current directory is in the path
875 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
876 xgcc
$(exeext
): gcc.o version.o choose-temp.o intl.o pexecute.o
prefix.o \
877 version.o mkstemp.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
878 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o
prefix.o version.o \
879 choose-temp.o pexecute.o mkstemp.o
$(EXTRA_GCC_OBJS
) $(LIBS
)
881 # Dump a specs file to make -B./ read these specs over installed ones.
883 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
886 # We do want to create an executable named `xgcc', so we can use it to
888 # Also create gcc-cross, so that install-common will install properly.
889 gcc-cross
: xgcc
$(exeext
)
890 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
892 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
893 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
895 # Copy float.h from its source.
898 cp
$(FLOAT_H
) gfloat.h
900 # Build the version of limits.h that we will install.
901 xlimits.h
: glimits.h limitx.h limity.h
902 if
$(LIMITS_H_TEST
) ; then \
903 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
905 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
907 mv tmp-xlimits.h xlimits.h
910 # This is done in two parts because some functions, in libgcc1.c,
911 # must be compiled with something other than GCC,
912 # while the rest, in libgcc2.c, must be compiled with xgcc.
913 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
915 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
916 # LIBCONVERT should put its output in libgcc1.conv.
917 libgcc1.conv
: libgcc1.a
918 $(LIBCONVERT
) libgcc1.a libgcc1.conv
920 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
921 # Make an empty file instead.
922 libgcc1.null
: $(GCC_PASSES
)
923 echo
"void __foo () {}" > dummy.c
924 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
925 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
926 rm -f dummy
$(objext
) dummy.c
928 # This is $(LIBGCC1) for a cross-compiler.
929 # We have no automatic way of building libgcc1.a,
930 # so it's up to the installer to find a way to do that.
931 # This rule deliberately does not depend on libgcc1.a
932 # so that it will fail if the installer hasn't provided it.
934 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
936 # Compile the library of arithmetic subroutines with the native compiler.
937 # Don't compile it with GCC!
938 # (That would cause most arithmetic functions to call themselves.)
940 # NOTE: If you modify these rules substantially, please be sure to
941 # check at least config/i386/t-sco5 and possibly other makefile
943 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
945 # Actually build it in tmplibgcc1.a, then rename at end,
946 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
947 # -e causes any failing command to make this rule fail.
948 # -e doesn't work in certain shells, so we test $$? as well.
949 # lynx has a broken ar, it always complains when the initial library is
950 # empty, thus this command works only if we don't do -e
951 # There is a trailing backslash (\) deleted from the following line.
953 for name in
$(LIB1FUNCS
); \
956 rm -f
$${name}$(objext
); \
957 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
958 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
959 mv libgcc1
$(objext
) $${name}$(objext
); \
960 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
961 rm -f
$${name}$(objext
); \
963 # Some shells crash when a loop has no items.
964 # So make sure there is always at least one--`..'.
966 # We don't use -e here because there are if statements
967 # that should not make the command give up when the if condition is false.
968 # Instead, we test for failure after each command where it matters.
969 for file in ..
$(LIB1FUNCS_EXTRA
); \
971 if
[ x
$${file} != x..
]; then \
972 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
974 if
[ $${name}.asm
= $${file} ]; then \
975 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
977 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
978 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
979 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
980 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
981 rm -f
$${name}.s
$${name}$(objext
); \
985 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
986 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
988 mv tmplibgcc1.a libgcc1.a
990 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
991 # functions. LIB1ASMSRC is the name of the source file in the config
993 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
994 -rm -f tmplibgcc1.a libgcc1.S
995 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
996 # Actually build it in tmplibgcc1.a, then rename at end,
997 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
998 # -e causes any failing command to make this rule fail.
999 # -e doesn't work in certain shells, so we test $$? as well.
1000 # lynx has a broken ar, it always complains when the initial library is
1001 # empty, thus this command works only if we don't do -e
1002 # There is a trailing backslash (\) deleted from the following line.
1004 for name in
$(LIB1ASMFUNCS
); \
1007 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1008 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1009 mv libgcc1
$(objext
) $${name}$(objext
); \
1010 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1011 rm -f
$${name}$(objext
); \
1014 mv tmplibgcc1.a libgcc1-asm.a
1016 # Generate assembly versions of the functions required for libgcc1.
1017 # You'll still need to massage the code by hand (possibly hacking
1018 # underscores and local labels) but this will get you started.
1019 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1022 for name in
$(LIB1FUNCS
); \
1025 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1026 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1027 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1028 cat libgcc1.s
>> libgcc1.S
; \
1029 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1030 echo
"" >> libgcc1.S
; \
1033 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1034 # But recompiling cc1 should not force recompilation of libgcc2.a.
1035 # If you want to force recompilation, delete libgcc2.a.
1036 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1037 -if
[ -f libgcc2.ready
] ; then \
1040 touch libgcc2.ready
; \
1043 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1044 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1045 machmode.h longlong.h frame.h gbl-ctors.h config.status
1046 # Actually build it in tmplibgcc2.a, then rename at end,
1047 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1049 # -e causes any failing command to make this rule fail.
1050 # -e doesn't work in certain shells, so we test $$? as well.
1051 # lynx has a broken ar, it always complains when the initial library is
1052 # empty, thus this command works only if we don't do -e
1053 # There is a trailing backslash (\) deleted from the following line.
1055 for name in
$(LIB2FUNCS
); \
1058 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1059 $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1060 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1061 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1062 rm -f
$${name}$(objext
); \
1064 for name in
$(LIB2FUNCS_EH
); \
1067 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1068 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1069 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1070 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1071 rm -f
$${name}$(objext
); \
1073 if
[ x
$(FPBIT
) != x
]; then \
1074 for name in
$(FPBIT_FUNCS
); \
1077 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1078 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1079 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1080 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1081 rm -f
$${name}$(objext
); \
1084 if
[ x
$(DPBIT
) != x
]; then \
1085 for name in
$(DPBIT_FUNCS
); \
1088 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1089 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1090 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1091 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1092 rm -f
$${name}$(objext
); \
1095 # Some shells crash when a loop has no items.
1096 # So make sure there is always at least one--`..'.
1098 # We don't use -e here because there are if statements
1099 # that should not make the command give up when the if condition is false.
1100 # Instead, we test for failure after each command where it matters.
1101 for file in
$(LIB2ADD
); do \
1102 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1103 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1104 if
[ $${name}.txt
= $${file} ]; then \
1105 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1106 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1107 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1108 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1109 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1110 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1111 LANGUAGES
="$(LANGUAGES)" \
1112 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1113 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1114 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1120 if
[ $${name}.asm
= $${file} ]; then \
1121 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1123 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1124 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1125 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1126 rm -f
$${name}.s
$${oname}$(objext
); \
1129 mv tmplibgcc2.a libgcc2.a
1130 # These lines were deleted from above the mv command
1131 # because ranlibing libgcc.a itself should suffice.
1132 # -if [ x${HPUX_GAS} = x ] ; then \
1133 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1134 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1138 # Combine the various libraries into a single library, libgcc.a.
1139 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1140 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1142 -if
[ x
$(LIBGCC1
) != x
]; \
1143 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1146 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1147 # unwritable table of contents file, and then print an error message when
1148 # the second ar command tries to overwrite this file. To avoid the error
1149 # message from ar, we make sure all files are writable.
1150 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1151 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1152 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1154 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1155 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1157 # Actually build it in tmplibgcc.a, then rename at end,
1158 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1159 mv tmplibgcc.a libgcc.a
1161 # Use the genmultilib shell script to generate the information the gcc
1162 # driver program needs to select the library directory based on the
1164 multilib.h
: s-mlib
; @true
1165 s-mlib
: $(srcdir)/genmultilib Makefile
1166 $(SHELL
) $(srcdir)/genmultilib \
1167 "$(MULTILIB_OPTIONS)" \
1168 "$(MULTILIB_DIRNAMES)" \
1169 "$(MULTILIB_MATCHES)" \
1170 "$(MULTILIB_EXCEPTIONS)" \
1171 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1172 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1175 # Build multiple copies of libgcc.a, one for each target switch.
1176 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1178 $(LIB2ADD
) machmode.h longlong.h gbl-ctors.h config.status
1179 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1180 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1181 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1182 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1183 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1184 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1185 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1186 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1187 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1188 LANGUAGES
="$(LANGUAGES)" \
1189 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1190 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1191 MULTILIB_CFLAGS
="$${flags}" \
1192 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1193 dir="$${dir}" stmp-multilib-sub
; \
1194 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1198 # Subroutine of stmp-multilib so make -n works.
1201 if
[ -d
$(dir) ]; then \
1203 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1206 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1207 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1208 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1209 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1210 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1211 LANGUAGES
="$(LANGUAGES)" \
1212 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1213 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1215 else rm -f
$(LIBGCC1
); \
1217 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1220 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1221 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1222 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1223 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1224 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1225 LANGUAGES
="$(LANGUAGES)" \
1226 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1228 rm -rf tmplibgcc.a tmpcopy
1230 if
[ x
$(LIBGCC1
) != x
]; \
1231 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1234 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1235 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1236 rm -rf libgcc2.a tmpcopy
1237 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1238 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1240 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1241 mv tmplibgcc.a
$(dir)/libgcc.a
1242 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1243 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1244 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1245 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1246 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1247 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1248 LANGUAGES
="$(LANGUAGES)" \
1249 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1250 mv t
$${f} $(dir)/$${f}; \
1254 # Compile two additional files that are linked with every program
1255 # linked using GCC on systems using COFF or ELF, for the sake of C++
1257 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1258 defaults.h frame.h gbl-ctors.h
1259 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1260 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1261 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1263 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1264 defaults.h frame.h gbl-ctors.h
1265 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1266 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1267 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1269 # On some systems we also want to install versions of these files
1270 # compiled using PIC for use in shared libraries.
1271 crtbeginS.o crtendS.o
: s-crtS
; @true
1273 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1274 defaults.h frame.h gbl-ctors.h
1275 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1276 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1277 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1278 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1279 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1280 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1281 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1284 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1285 crt0.o
: s-crt0
; @true
1286 mcrt0.o
: s-crt0
; @true
1288 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1289 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1290 -o crt0.o
-c
$(CRT0_S
)
1291 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1292 -o mcrt0.o
-c
$(MCRT0_S
)
1295 # Compiling object files from source files.
1297 # Note that dependencies on obstack.h are not written
1298 # because that file is not part of GCC.
1300 # C language specific files.
1302 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1303 $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
1304 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1305 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1306 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1307 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d c-parse.y
-o c-parse.c
1308 $(srcdir)/c-parse.y
: c-parse.in
1309 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1310 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1311 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1312 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1313 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1315 $(srcdir)/c-gperf.h
: c-parse.gperf
1316 gperf
-L KR-C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1317 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h
1318 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1320 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h flags.h \
1322 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h \
1323 intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1324 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h toplev.h \
1326 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1327 $(srcdir)/c-parse.h input.h intl.h flags.h
$(srcdir)/c-gperf.h c-pragma.h \
1328 toplev.h output.h mbchar.h
1329 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h
1330 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1331 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) except.h \
1332 function.h defaults.h c-pragma.h toplev.h
1333 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1334 flags.h toplev.h
$(EXPR_H
)
1335 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1336 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1337 hard-reg-set.h
$(BASIC_BLOCK_H
)
1338 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1340 collect2
$(exeext
): collect2.o tlink.o hash.o cplus-dem.o underscore.o \
1341 version.o choose-temp.o mkstemp.o
$(LIBDEPS
)
1343 COLLECT2_OBJS
= collect2.o tlink.o hash.o choose-temp.o cplus-dem.o \
1344 intl.o underscore.o version.o mkstemp.o
1345 collect2
: $(COLLECT2_OBJS
) $(LIBDEPS
)
1346 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1347 -rm -f collect2
$(exeext
)
1348 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1350 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1351 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h
1352 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1353 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1354 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1356 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h toplev.h collect2.h
1357 hash.o
: hash.c hash.h system.h toplev.h
1359 cplus-dem.o
: $(srcdir)/..
/libiberty
/cplus-dem.c
$(DEMANGLE_H
)
1361 $(LN_S
) $(srcdir)/..
/libiberty
/cplus-dem.c cplus-dem.c
1362 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) cplus-dem.c
1364 pexecute.o
: $(srcdir)/..
/libiberty
/pexecute.c
$(CONFIG_H
) system.h
1366 $(LN_S
) $(srcdir)/..
/libiberty
/pexecute.c pexecute.c
1367 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) pexecute.c
1369 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1371 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1372 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1374 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1375 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1377 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1378 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1380 underscore.c
: s-under
; @true
1382 s-under
: $(GCC_PASSES
)
1383 echo
"int xxy_us_dummy;" >tmp-dum.c
1384 $(GCC_FOR_TARGET
) -S tmp-dum.c
1385 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1386 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1387 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1389 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1391 $(srcdir)/move-if-change tmp-under.c underscore.c
1392 -rm -f tmp-dum.c tmp-dum.s
1395 # A file used by all variants of C.
1397 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1398 flags.h toplev.h output.h c-pragma.h
$(RTL_H
)
1400 # Language-independent files.
1403 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1404 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1405 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1406 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1407 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\"
1408 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1409 Makefile
$(lang_specs_files
) prefix.h
1410 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1412 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1414 tree-check.h
: s-check
; @true
1415 s-check
: gencheck
$(srcdir)/move-if-change
1416 .
/gencheck
> tmp-check.h
1417 $(srcdir)/move-if-change tmp-check.h tree-check.h
1420 gencheck
: gencheck.o
$(lang_tree_files
) $(HOST_LIBDEPS
)
1421 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1422 gencheck.o
$(HOST_LIBS
)
1424 gencheck.o
: gencheck.c tree.def
$(CONFIG_H
) hconfig.h system.h
1425 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1426 $(srcdir)/gencheck.c
1428 dumpvers
: dumpvers.c
1430 version.o
: version.c
1431 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1433 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1434 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1436 choose-temp.o
: $(srcdir)/..
/libiberty
/choose-temp.c
$(CONFIG_H
) system.h
1438 $(LN_S
) $(srcdir)/..
/libiberty
/choose-temp.c choose-temp.c
1439 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) choose-temp.c
1441 mkstemp.o
: $(srcdir)/..
/libiberty
/mkstemp.c
$(CONFIG_H
) system.h
1443 $(LN_S
) $(srcdir)/..
/libiberty
/mkstemp.c mkstemp.c
1444 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) mkstemp.c
1446 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1447 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1448 -DPREFIX
=\"$(prefix)\" \
1449 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1451 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h toplev.h
1453 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h except.h
1454 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
)
1455 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1456 function.h
$(EXPR_H
) $(RTL_H
) toplev.h except.h
1457 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1459 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) \
1460 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1461 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1462 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) \
1463 $(lang_options_files
)
1464 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1465 -DTARGET_NAME
=\"$(target_alias
)\" \
1466 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1468 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1470 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1471 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1473 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1474 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1475 xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h
1476 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1477 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1478 insn-config.h
$(RECOG_H
) output.h toplev.h except.h
1479 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1480 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1481 loop.h
$(RECOG_H
) toplev.h output.h varray.h
1482 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1483 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1484 insn-config.h
$(RECOG_H
) output.h except.h toplev.h
1485 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1486 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) output.h \
1487 typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
1488 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1489 insn-flags.h
$(REGS_H
) toplev.h output.h
1490 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1491 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h
1492 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1493 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h insn-codes.h
1494 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1495 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h
1496 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1497 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1499 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1500 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1501 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1503 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1504 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1505 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1506 flags.h insn-config.h reload.h output.h defaults.h \
1507 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1508 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1509 flags.h toplev.h output.h dbxout.h
1510 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1511 except.h function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h \
1512 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h
1513 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1514 getpwd.o
: getpwd.c
$(CONFIG_H
) system.h
1516 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1517 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1518 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h
1520 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1521 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h \
1523 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1524 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h toplev.h
1526 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1527 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h
1528 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1529 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) output.h
1530 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1531 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h
1532 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1533 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h insn-config.h
1534 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1535 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1537 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1538 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h varray.h
1539 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-config.h \
1540 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h recog.h
1541 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1542 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1543 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1544 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1545 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h toplev.h \
1547 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1548 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) output.h \
1549 insn-attr.h toplev.h
1550 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1552 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h \
1553 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1554 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1556 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1557 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1559 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1560 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1561 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h toplev.h
1562 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1563 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) \
1564 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1565 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1566 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h \
1567 insn-flags.h
$(RECOG_H
) flags.h output.h
$(EXPR_H
)
1568 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1569 $(REGS_H
) toplev.h output.h
$(EXPR_H
)
1570 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1571 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h \
1572 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1573 $(SCHED_PREFIX
)sched.o
: $(SCHED_PREFIX
)sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1574 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h \
1575 insn-attr.h toplev.h recog.h
1576 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1577 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h except.h real.h \
1578 output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h \
1579 defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
1580 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1581 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1582 insn-flags.h insn-codes.h real.h toplev.h
1583 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) recog.h \
1584 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
1585 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1587 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1588 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1589 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
1590 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1592 # Build auxiliary files that support ecoff format.
1593 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1594 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1596 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h machmode.h
1598 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1599 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1601 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1603 # Build file to support OSF/rose half-pic format.
1604 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1606 # Normally this target is not used; but it is used if you
1607 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1608 # from the GNU Emacs distribution.
1609 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1611 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1612 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1613 -c
`echo alloca.c | sed 's,^\./,,'`
1616 # Generate header and source files from the machine description,
1619 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1620 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1621 insn-attr.h insn-attrtab.c
1623 # The following pair of rules has this effect:
1624 # genconfig is run only if the md has changed since genconfig was last run;
1625 # but the file insn-config.h is touched only when its contents actually change.
1627 # Each of the other insn-* files is handled by a similar pair of rules.
1629 # This causes an anomaly in the results of make -n
1630 # because insn-* is older than s-*
1631 # and thus make -n thinks that insn-* will be updated
1632 # and force recompilation of things that depend on it.
1633 # We use move-if-change precisely to avoid such recompilation.
1634 # But there is no way to teach make -n that it will be avoided.
1636 # Each of the insn-*.[ch] rules has a semicolon at the end,
1637 # for otherwise the system Make on SunOS 4.1 never tries
1638 # to recompile insn-*.o. To avoid problems and extra noise from
1639 # versions of make which don't like empty commands (nothing after the
1640 # trailing `;'), we call true for each.
1642 insn-config.h
: s-config
; @true
1643 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1644 .
/genconfig
$(md_file
) > tmp-config.h
1645 $(srcdir)/move-if-change tmp-config.h insn-config.h
1648 insn-flags.h
: s-flags
; @true
1649 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1650 .
/genflags
$(md_file
) > tmp-flags.h
1651 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1654 insn-codes.h
: s-codes
; @true
1655 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1656 .
/gencodes
$(md_file
) > tmp-codes.h
1657 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1660 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1661 insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h
1662 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1664 insn-emit.c
: s-emit
; @true
1665 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1666 .
/genemit
$(md_file
) > tmp-emit.c
1667 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1670 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1671 real.h output.h flags.h system.h
1672 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1674 insn-recog.c
: s-recog
; @true
1675 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1676 .
/genrecog
$(md_file
) > tmp-recog.c
1677 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1680 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1681 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1682 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1684 insn-opinit.c
: s-opinit
; @true
1685 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1686 .
/genopinit
$(md_file
) > tmp-opinit.c
1687 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1690 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1691 insn-config.h recog.h
1692 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1694 insn-extract.c
: s-extract
; @true
1695 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1696 .
/genextract
$(md_file
) > tmp-extract.c
1697 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1700 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1701 system.h insn-config.h recog.h
1702 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1704 insn-peep.c
: s-peep
; @true
1705 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1706 .
/genpeep
$(md_file
) > tmp-peep.c
1707 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1710 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1711 output.h insn-attr.h insn-config.h system.h toplev.h
1712 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1714 insn-attr.h
: s-attr
; @true
1715 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1716 .
/genattr
$(md_file
) > tmp-attr.h
1717 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1720 insn-attrtab.c
: s-attrtab
; @true
1721 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1722 if cmp
-s
$(PREMADE_ATTRTAB_MD
) $(md_file
); \
1724 echo Using
$(PREMADE_ATTRTAB
); \
1725 cp
$(PREMADE_ATTRTAB
) tmp-attrtab.c
; \
1727 .
/genattrtab
$(md_file
) > tmp-attrtab.c
; \
1729 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1732 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1733 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1734 insn-codes.h system.h
1735 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1737 insn-output.c
: s-output
; @true
1738 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1739 .
/genoutput
$(md_file
) > tmp-output.c
1740 $(srcdir)/move-if-change tmp-output.c insn-output.c
1743 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h
1744 genrtl.c genrtl.h
: s-genrtl
1745 @true
# force gnu make to recheck modification times.
1747 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1748 .
/gengenrtl tmp-genrtl.h tmp-genrtl.c
1749 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1750 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1754 # Compile the programs that generate insn-* from the machine description.
1755 # They are compiled with $(HOST_CC), and associated libraries,
1756 # since they need to run on this machine
1757 # even if GCC is being compiled to run on some other machine.
1759 # $(CONFIG_H) is omitted from the deps of the gen*.o
1760 # because these programs don't really depend on anything
1761 # about the target machine. They do depend on config.h itself,
1762 # since that describes the host machine.
1764 # Pass the md file through cpp if the target requests it.
1765 $(MD_FILE
): $(MD_DEPS
)
1767 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1770 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1771 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1772 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1774 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h
1775 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1777 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1778 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1779 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1781 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h
1782 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1784 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1785 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1786 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1788 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h
1789 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1791 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1792 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1793 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1795 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h
1796 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1798 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1799 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1800 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1802 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h
1803 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1805 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1806 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1807 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1809 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h
1810 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1812 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1813 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1814 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1816 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1817 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1819 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1820 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1821 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1823 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h
1824 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1826 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1827 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1828 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1830 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h
1831 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1833 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1834 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1835 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1837 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1838 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1840 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1841 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1842 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1844 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h
1845 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1847 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1848 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1849 gengenrtl.o
$(HOST_LIBS
)
1851 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1852 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1855 # Compile the libraries to be used by gen*.
1856 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1857 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1858 # with the rules for rtl.o, alloca.o, etc.
1859 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1860 rm -f
$(HOST_PREFIX
)rtl.c
1861 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1862 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1864 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
)
1865 rm -f
$(HOST_PREFIX
)print-rtl.c
1866 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1867 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1869 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1870 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1871 rm -f
$(HOST_PREFIX
)bitmap.c
1872 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1873 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1875 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1876 rm -f
$(HOST_PREFIX
)rtlanal.c
1877 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1878 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1880 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1881 rm -f
$(HOST_PREFIX
)alloca.c
1882 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1883 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1885 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1886 rm -f
$(HOST_PREFIX
)obstack.c
1887 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1888 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1890 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1891 rm -f
$(HOST_PREFIX
)vfprintf.c
1892 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1893 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1895 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1896 rm -f
$(HOST_PREFIX
)doprint.c
1897 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1898 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1900 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1901 rm -f
$(HOST_PREFIX
)malloc.c
1902 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1903 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1905 # This satisfies the dependency that we get if you cross-compile a compiler
1906 # that does not need to compile alloca, malloc or whatever.
1908 touch
$(HOST_PREFIX_1
)
1912 # Remake internationalization support.
1914 intl.o
: intl.c intl.h gansidecl.h Makefile
1915 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1916 -DLOCALEDIR
=\"$(localedir
)\" \
1917 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1919 # This is needed to when doing a partial build after a `make clean'.
1920 # libintl.a does not depend on intl.all,
1921 # as that would force a lot of recompiling.
1922 $(top_builddir
)/intl
/libintl.a
:
1923 @echo
"$(MAKE) intl.all"
1924 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1926 # Make sure all the headers are there for xgettext to scan.
1927 # FIXME: extend the language interface
1928 # so that we needn't jump into language build internals like this.
1929 intl.
all intl.
install intl.distdir
: \
1930 $(srcdir)/c-gperf.h \
1931 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c \
1932 $(srcdir)/cp
/parse.c
$(srcdir)/objc
/objc-parse.c
1933 $(srcdir)/cp
/parse.c
:
1934 @cp_srcdir
=`sed -n 's/^srcdir[ ]*=[ ]*//p' cp/Makefile` && \
1935 echo
"cd cp && $(MAKE) $$cp_srcdir/parse.c" && \
1937 $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $(CXX_FLAGS_TO_PASS
) \
1940 intl.
all intl.
install intl.
uninstall intl.distdir \
1941 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1942 @for d in
$(INTL_SUBDIRS
); do \
1943 target
=`expr $@ : 'intl.\(.*\)'` && \
1944 echo
"(cd $$d && $(MAKE) $$target)" && \
1945 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1948 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1949 # but we need them for the `make extraclean' in distdir-finish.
1951 for d in
$(INTL_SUBDIRS
); do \
1952 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1955 # Remake cpp and protoize.
1957 # Making the preprocessor
1958 cpp$(exeext
): $(CCCP
)$(exeext
)
1960 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1961 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
1962 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
1963 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
1964 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h
1965 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1966 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1967 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1969 # We use $(libsubdir)/$(unlibsubdir) to match the
1970 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1971 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
1972 mbchar.h
prefix.h Makefile.in
1973 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1974 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1975 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
1976 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1977 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1978 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
1979 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1981 LIBCPP_OBJS
= cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
1982 cppulp.o
prefix.o version.o mbchar.o @extra_cpp_objs@ intl.o
1984 # All the other archives built/used by this makefile are for targets. This
1985 # one is strictly for the host.
1987 libcpp.a
: $(LIBCPP_OBJS
)
1988 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
1989 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
1991 cppmain
$(exeext
): cppmain.o libcpp.a
$(LIBDEPS
)
1992 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
1995 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h machmode.h system.h
1997 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h machmode.h cpphash.h intl.h \
1998 config.status system.h
prefix.h Makefile
1999 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2000 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2001 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
2002 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2003 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2004 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2005 -c
`echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
2007 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h machmode.h system.h
2009 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
2011 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl machmode.h system.h
2013 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h machmode.h system.h
2015 cpphash.o
: cpphash.c cpplib.h machmode.h cpphash.h
$(CONFIG_H
) system.h
2017 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h machmode.h system.h
2019 # Note for the stamp targets, we run the program `true' instead of
2020 # having an empty command (nothing following the semicolon).
2022 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
2024 PROTO_OBJS
= choose-temp.o getopt.o getopt1.o getpwd.o \
2025 intl.o pexecute.o version.o mkstemp.o
2027 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2028 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2030 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2031 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2033 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2035 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2036 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2037 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
2038 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2039 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2040 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2041 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2042 $(srcdir)/protoize.c
2044 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2045 $(CONFIG_H
) system.h Makefile
2046 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2047 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2048 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gxx_include_dir
)\" \
2049 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2050 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2051 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2052 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2053 $(srcdir)/unprotoize.c
2055 getopt.o
: $(srcdir)/..
/libiberty
/getopt.c
$(srcdir)/..
/include/getopt.h
2057 $(LN_S
) $(srcdir)/..
/libiberty
/getopt.c getopt.c
2058 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) getopt.c
2060 getopt1.o
: $(srcdir)/..
/libiberty
/getopt1.c
$(srcdir)/..
/include/getopt.h
2062 $(LN_S
) $(srcdir)/..
/libiberty
/getopt1.c getopt1.c
2063 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) getopt1.c
2065 # This info describes the target machine, so compile with GCC just built.
2066 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2068 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2069 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2070 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2071 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2072 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2075 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2076 -rm -f tmp-proto.
[cso
]
2077 cp
$(srcdir)/protoize.c tmp-proto.c
2078 chmod u
+w tmp-proto.c
2079 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2080 $(CFLAGS) $(INCLUDES) \
2081 -DGCC_INCLUDE_DIR=0 \
2082 -DGPLUSPLUS_INCLUDE_DIR=0 \
2083 -DCROSS_INCLUDE_DIR=0 \
2084 -DTOOL_INCLUDE_DIR=0 \
2085 -DSTD_PROTO_DIR=0" tmp-proto.c
2086 @echo
'**********' Expect
400 lines of differences.
2087 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2088 -wc
-l tmp-proto.diff
2089 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2090 $(CFLAGS) $(INCLUDES) \
2091 -DGCC_INCLUDE_DIR=0 \
2092 -DGPLUSPLUS_INCLUDE_DIR=0 \
2093 -DCROSS_INCLUDE_DIR=0 \
2094 -DTOOL_INCLUDE_DIR=0 \
2095 -DSTD_PROTO_DIR=0" tmp-proto.c
2096 @echo Expect zero differences.
2097 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2098 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2100 gcov.o
: gcov.c gcov-io.h intl.h system.h
2102 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2103 # upon whether $(exeext) is empty or not.
2104 GCOV_OBJS
= gcov.o intl.o
2105 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2106 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2108 # Build the include directory. The stamp files are stmp-* rather than
2109 # s-* so that mostlyclean does not force the include directory to
2112 # Build the include directory including float.h (which no longer depends upon
2114 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h gfloat.h
2115 # Copy in the headers provided with gcc.
2116 # The sed command gets just the last file name component;
2117 # this is necessary because VPATH could add a dirname.
2118 # Using basename would be simpler, but some systems don't have it.
2119 # The touch command is here to workaround an AIX/Linux NFS bug.
2120 for file in ..
$(USER_H
); do \
2121 if
[ X
$$file != X..
]; then \
2122 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2123 touch
include/$$realfile; \
2124 rm -f
include/$$realfile; \
2125 cp
$$file include; \
2126 chmod a
+r
include/$$realfile; \
2129 rm -f
include/limits.h
2130 cp xlimits.h
include/limits.h
2131 chmod a
+r
include/limits.h
2132 rm -f
include/float.h
2133 if
[ -s gfloat.h
]; then \
2134 cp gfloat.h
include/float.h
&& \
2135 chmod a
+r
include/float.h
; \
2137 # Install the README
2138 rm -f
include/README
2139 cp
$(srcdir)/README-fixinc
include/README
2140 chmod a
+r
include/README
2143 # Now that gfloat.h no longer depends upon enquire, this is actually a no-op.
2148 DEST
=`cd $(srcdir) ; pwd`/$@ CC
=$(CC
) MAKE
=$(MAKE
) CFLAGS
="$(CFLAGS)" \
2149 export DEST CC MAKE CFLAGS
; \
2150 echo DEST
=$$DEST CC
=$$CC MAKE
=$$MAKE CFLAGS
=$$CFLAGS ; \
2151 cd ..
/contrib
/fixinc
; \
2152 $(SHELL
) mkfixinc.sh
$(target
) $$DEST
2154 # Build fixed copies of system files.
2155 stmp-fixinc
: $(FIXINCLUDES
) gsyslimits.h
2158 if
[ x
$(FIXINCLUDES
) != xMakefile.in
]; \
2160 for
dir in
$(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
); do \
2163 $(SHELL
) $(srcdir)/$(FIXINCLUDES
) include $$dir; \
2166 if
[ x
$(INSTALL_ASSERT_H
) != x
] ; \
2168 rm -f
include/assert.h
; \
2169 cp
$(srcdir)/assert.h
include/assert.h
; \
2170 chmod a
+r
include/assert.h
; \
2174 rm -f
include/syslimits.h
2175 if
[ -f
include/limits.h
]; then \
2176 mv
include/limits.h
include/syslimits.h
; \
2178 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2180 chmod a
+r
include/syslimits.h
2181 # If $(SYSTEM_HEADER_DIR) is $(gcc_tooldir)/sys-include, and
2182 # that directory exists, then make sure that $(libsubdir) exists.
2183 # This is because cpp is compiled to find $(gcc_tooldir)/include via
2184 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2186 if
[ "$(SYSTEM_HEADER_DIR)" = "$(gcc_tooldir)/sys-include" ] \
2187 && [ -d
$(gcc_tooldir
)/sys-include
]; then \
2188 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2189 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2190 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2191 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2196 # Files related to the fixproto script.
2198 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2199 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2201 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2203 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2204 mv tmp-deduced.h deduced.h
; \
2209 GEN_PROTOS_OBJS
= gen-protos.o cppalloc.o cpperror.o cppexp.o \
2210 cpphash.o cpplib.o
prefix.o scan.o version.o cppfiles.o cppulp.o
2211 gen-protos
: $(GEN_PROTOS_OBJS
) $(HOST_LIBDEPS
)
2212 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
2213 $(GEN_PROTOS_OBJS
) $(HOST_LIBS
)
2215 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2216 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2218 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2219 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2221 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2222 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2223 mv tmp-fixtmp.c fixtmp.c
2224 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2225 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2226 | .
/gen-protos
>xsys-protos.hT
2227 mv xsys-protos.hT xsys-protos.h
2230 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2232 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2233 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
)
2235 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2236 xsys-protos.h
$(build_xm_file
) system.h cpplib.h machmode.h cpphash.h
2237 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2239 scan-decls.o
: scan-decls.c scan.h cpplib.h machmode.h
$(build_xm_file
) system.h
2240 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2242 # stmp-fixproto depends on this, not on fix-header directly.
2243 # The idea is to make sure fix-header gets built,
2244 # but not rerun fixproto after each stage
2245 # just because fix-header's mtime has changed.
2246 fixhdr.ready
: fix-header
2247 -if
[ -f fixhdr.ready
] ; then \
2250 touch fixhdr.ready
; \
2253 # stmp-headers is to make sure fixincludes has already finished.
2254 # The if statement is so that we don't run fixproto a second time
2255 # if it has already been run on the files in `include'.
2256 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2257 @echo
"Various warnings and error messages from fixproto are normal"
2258 -if
[ -d
include ] ; then true
; else mkdir
include; fi
2259 -if
[ -f
include/fixed
] ; then true
; \
2261 : This line works around a
'make' bug in BSDI
1.1.
; \
2262 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2263 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2264 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2266 touch
include/fixed
; \
2270 # Remake the info files.
2273 info: cpp.
info gcc.
info lang.
info
2275 cpp.
info: $(srcdir)/cpp.texi
2276 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2278 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2279 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2280 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2281 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2283 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2285 # This works with GNU Make's default rule.
2286 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2287 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2288 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2289 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2291 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2293 cpp.
dvi: $(srcdir)/cpp.texi
2294 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2296 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2299 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2300 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2301 --no-split
-o INSTALL install1.texi
2303 # Deletion of files made during compilation.
2304 # There are four levels of this:
2305 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2306 # `mostlyclean' is useful while working on a particular type of machine.
2307 # It deletes most, but not all, of the files made by compilation.
2308 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2309 # `clean' deletes everything made by running `make all'.
2310 # `distclean' also deletes the files made by config.
2311 # `maintainer-clean' also deletes everything that could be regenerated
2312 # automatically, except for `configure'.
2313 # We remove as much from the language subdirectories as we can
2314 # (less duplicated code).
2317 mostlyclean: intl.
mostlyclean lang.
mostlyclean
2318 -rm -f
$(STAGESTUFF
)
2319 # Delete the temporary source copies for cross compilation.
2320 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2321 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2322 -rm -f
$(HOST_PREFIX_1
)obstack.c
2323 # Delete the temp files made in the course of building libgcc.a.
2324 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2325 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2326 # Delete other built files.
2327 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2328 # Delete the stamp and temporary files.
2329 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2330 -rm -f
*/stamp-
* */tmp-
*
2331 # Delete debugging dump files.
2332 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2333 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2334 -rm -f
*.regmove
*.mach
*.bp
*.gcse
2335 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2336 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2337 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
2338 # Delete some files made during installation.
2339 -rm -f specs gfloat.h float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2340 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2341 # Delete files generated for fixproto
2342 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2343 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2344 # Delete unwanted output files from TeX.
2345 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2346 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2347 # Delete sorted indices we don't actually use.
2348 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2349 # Delete core dumps.
2353 # Delete all files made by compilation
2354 # that don't exist in the distribution.
2355 clean: mostlyclean intl.
clean lang.
clean
2356 # It may not be quite desirable to delete unprotoize.c here,
2357 # but the spec for `make clean' requires it.
2358 # Using unprotoize.c is not quite right in the first place,
2359 # but what better way is there?
2360 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2364 -if
[ -f md.pre-cpp
]; then \
2367 # Delete the include directory.
2369 # Delete files used by the "multilib" facility (including libgcc subdirs).
2370 -rm -f multilib.h tmpmultilib
*
2371 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2372 rm -rf
$(MULTILIB_DIRNAMES
); \
2373 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2374 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2376 -rm -fr stage1 stage2 stage3 stage4
2378 # Delete all files that users would normally create
2379 # while building and installing GCC.
2380 INTL_DISTCLEAN
= intl.
distclean
2381 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2382 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2384 -rm -f config.status config.run config.cache config.bak
2385 -rm -f Make-lang Make-hooks Make-host Make-target
2386 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2387 -rm -f gthr-default.h
2388 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2389 -rm -f c-parse.output
2392 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2393 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2394 -rm -f intl
/libintl.h libintl.h
2396 # Delete anything likely to be found in the source directory
2397 # that shouldn't be in the distribution.
2398 extraclean
: distclean lang.extraclean
2399 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2400 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2401 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2402 -rm -f config
/*/*.orig config
/*/*.rej
2403 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2404 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2405 -rm -f
*lose config
/*lose config
/*/*lose
2406 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2407 -rm -f y.tab.c
yacc.
*
2408 -rm -f
*/=* */"#"* */*~
*
2409 -rm -f
*/patch
* */*.orig
*/*.rej
2410 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2411 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2412 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2414 # Get rid of every file that's generated from some other file, except for `configure'.
2415 # Most of these files ARE PRESENT in the GCC distribution.
2416 # We define INTL_DISTCLEAN to be empty in the submake, so that
2417 # we don't descend into intl after its makefile has been removed.
2419 @echo
'This command is intended for maintainers to use; it'
2420 @echo
'deletes files that may need special tools to rebuild.'
2421 $(MAKE
) INTL_DISTCLEAN
= distclean \
2422 intl.maintainer-clean lang.maintainer-clean
2423 -rm -f c-parse.y c-gperf.h
2424 -rm -f c-parse.c c-parse.h c-parse.output
2425 -rm -f cexp.c cexp.output TAGS
2426 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2427 -rm -f gcc.
info* gcc.??s gcc.
*aux
2429 # Entry points `install' and `uninstall'.
2430 # Also use `install-collect2' to install collect2 when the config files don't.
2432 # The semicolon is to prevent the install.sh -> install default rule
2433 # from doing anything. Having it run true helps avoid problems and
2434 # noise from versions of make which don't like to have null commands.
2435 install: $(INSTALL_TARGET
) ; @true
2437 # Copy the compiler files into directories where they will be run.
2438 # Install the driver last so that the window when things are
2440 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2441 install-man install-info intl.
install lang.install-normal install-driver
2443 # Do nothing while making gcc with a cross-compiler. The person who
2444 # makes gcc for the target machine has to know how to put a complete
2445 # gcc together by hand.
2446 install-build
: force
2447 @echo You have to
install gcc on your target machine by hand.
2449 # Run this on the target machine
2450 # to finish installation of cross compiler.
2451 install-cross-rest
: install-float-h-cross
2453 # Install float.h for cross compiler.
2454 # Run this on the target machine!
2455 install-float-h-cross
: installdirs
2456 # if [ -f enquire ] ; then true; else false; fi
2457 # Note: don't use -. We should fail right away if enquire was not made.
2458 .
/enquire
-f
> $(tmpdir
)/float.h
2459 -rm -f
$(libsubdir
)/include/float.h
2460 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2461 -rm -f
$(tmpdir
)/float.h
2462 chmod a-x
$(libsubdir
)/include/float.h
2464 # Create the installation directories.
2466 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2467 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2468 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2469 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2470 # This dir isn't currently searched by cpp.
2471 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2472 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2473 fdir
=$${fdir}/$${dir}; \
2474 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2476 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2477 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2478 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2479 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2480 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2481 # We don't use mkdir -p to create the parents of man1dir,
2482 # because some systems don't support it.
2483 # Instead, we use this technique to create the immediate parent of man1dir.
2484 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2485 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2486 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2488 # Install the compiler executables built during cross compilation.
2489 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2490 for file in
$(COMPILERS
); do \
2491 if
[ -f
$$file ] ; then \
2492 rm -f
$(libsubdir
)/$$file; \
2493 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2497 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2498 if
[ x
"$$file" != x..
]; then \
2499 rm -f
$(libsubdir
)/$$file; \
2500 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2503 for file in
$(EXTRA_PARTS
) ..
; do \
2504 if
[ x
"$$file" != x..
]; then \
2505 rm -f
$(libsubdir
)/$$file; \
2506 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2507 chmod a-x
$(libsubdir
)/$$file; \
2510 # Don't mess with specs if it doesn't exist yet.
2511 -if
[ -f specs
] ; then \
2512 rm -f
$(libsubdir
)/specs
; \
2513 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2514 chmod a-x
$(libsubdir
)/specs
; \
2516 # Install protoize if it was compiled.
2517 -if
[ -f protoize
$(exeext
) ]; \
2519 if
[ -f gcc-cross
$(exeext
) ] ; then \
2520 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2521 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2522 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2523 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2525 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2526 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2527 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2528 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2530 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2531 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2532 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2534 -rm -f
$(libsubdir
)/cpp$(exeext
)
2535 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2536 # Install gcov if it was compiled.
2537 -if
[ -f gcov
$(exeext
) ]; \
2539 rm -f
$(bindir)/gcov
$(exeext
); \
2540 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2543 # Install the driver program as $(target_alias)-gcc
2544 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2545 install-driver
: xgcc
$(exeext
)
2546 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2547 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2548 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2549 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2550 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2551 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2554 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2555 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2556 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2557 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2558 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2561 # Install the info files.
2562 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2563 # to do the install.
2564 install-info
: doc
installdirs lang.install-info
2565 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2566 for f in
cpp.
info* gcc.
info*; do \
2567 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2569 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2570 if
[ -f
$(infodir)/dir ] ; then \
2571 for f in
cpp.
info gcc.
info; do \
2572 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2576 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2578 # Install the man pages.
2579 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2580 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2581 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2582 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2583 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2585 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2586 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2587 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2589 -rm -f
$(man1dir)/cccp
$(manext)
2590 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2591 -chmod a-x
$(man1dir)/cccp
$(manext)
2593 # Install the library.
2594 install-libgcc
: libgcc.a
installdirs
2595 -if
[ -f libgcc.a
] ; then \
2596 rm -f
$(libsubdir
)/libgcc.a
; \
2597 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2598 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2599 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2600 chmod a-x
$(libsubdir
)/libgcc.a
; \
2603 # Install multiple versions of libgcc.a.
2604 install-multilib
: stmp-multilib
installdirs
2605 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2606 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2607 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2608 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2609 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2610 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2612 if
$(RANLIB_TEST_FOR_TARGET
); then \
2613 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2615 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2618 # Install all the header files built in the include subdirectory.
2619 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2620 # Fix symlinks to absolute paths in the installed include directory to
2621 # point to the installed directory, not the build directory.
2622 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2623 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2624 if
[ $$?
-eq
0 ]; then \
2625 dir=`cd include; pwd`; \
2626 for i in
$$files; do \
2627 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2628 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2629 rm -f
$(libsubdir
)/include/$$i; \
2630 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2635 # Create or recreate the gcc private include file directory.
2636 install-include-dir
: installdirs
2637 -rm -rf
$(libsubdir
)/include
2638 mkdir
$(libsubdir
)/include
2639 -chmod a
+rx
$(libsubdir
)/include
2641 # Install the include directory using tar.
2642 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2644 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar $(TAROUTOPTS
) - )
2645 # /bin/sh on some systems returns the status of the first tar,
2646 # and that can lose with GNU tar which always writes a full block.
2647 # So use `exit 0' to ignore its exit status.
2649 # Install the include directory using cpio.
2650 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2651 (cd
include; find .
-print) |
(cd
include; cpio
-pdum
$(libsubdir
)/include)
2653 # Put assert.h where it won't override GNU libc's assert.h.
2654 # It goes in a dir that is searched after GNU libc's headers;
2655 # thus, the following conditionals are no longer needed.
2656 # But it's not worth deleting them now.
2657 ## Don't replace the assert.h already there if it is not from GCC.
2658 ## This code would be simpler if it tested for -f ... && ! grep ...
2659 ## but supposedly the ! operator is missing in sh on some systems.
2660 install-assert-h
: assert.h
installdirs
2661 if
[ -f
$(assertdir
)/assert.h
]; \
2663 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2665 rm -f
$(assertdir
)/assert.h
; \
2666 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2667 chmod a-x
$(assertdir
)/assert.h
; \
2671 rm -f
$(assertdir
)/assert.h
; \
2672 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2673 chmod a-x
$(assertdir
)/assert.h
; \
2676 # Use this target to install the program `collect2' under the name `collect2'.
2677 install-collect2
: collect2
installdirs
2678 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2679 # Install the driver program as $(libsubdir)/gcc for collect2.
2680 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2682 # Cancel installation by deleting the installed files.
2683 uninstall: intl.
uninstall lang.
uninstall
2684 -rm -rf
$(libsubdir
)
2685 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2686 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2687 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2688 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2689 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2690 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2691 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2692 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2693 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2694 -rm -rf
$(man1dir)/cccp
$(manext)
2695 -rm -rf
$(man1dir)/protoize
$(manext)
2696 -rm -rf
$(man1dir)/unprotoize
$(manext)
2697 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2699 # These targets are for the dejagnu testsuites. The file site.exp
2700 # contains global variables that all the testsuites will use.
2702 # Set to $(target_alias)/ for cross.
2703 target_subdir
= @target_subdir@
2705 site.exp
: .
/config.status Makefile
2706 @echo
"Making a new config file..."
2709 -@mv site.exp site.bak
2710 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2711 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2712 @echo
"# add them to the last section" >> .
/tmp0
2713 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2714 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2715 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2716 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2717 @echo
"set target_triplet $(target)" >> .
/tmp0
2718 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2719 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2720 @echo
"set CFLAGS \"\"" >> .
/tmp0
2721 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2722 # If newlib has been configured, we need to pass -B to gcc so it can find
2723 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2724 # message if it doesn't, but the testsuite is supposed to ignore the message -
2725 # it's too difficult to tell when to and when not to pass -B (not all targets
2726 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2727 # seems like too selective a test.
2728 # ??? Another way to solve this might be to rely on linker scripts. Then
2729 # theoretically the -B won't be needed.
2730 # We also need to pass -L ../ld so that the linker can find ldscripts.
2731 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2732 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2733 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2734 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2735 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2736 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2739 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2740 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2743 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2744 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2745 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2746 @cat .
/tmp0
> site.exp
2747 @cat site.bak | sed \
2748 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2751 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2753 check: $(CHECK_TARGETS
)
2755 testsuite
/site.exp
: site.exp
2756 if
[ -d testsuite
]; then \
2761 rm -rf testsuite
/site.exp
2762 cp site.exp testsuite
/site.exp
2764 check-g
++: testsuite
/site.exp
2765 -rootme
=`pwd`; export rootme
; \
2766 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2768 EXPECT
=${EXPECT} ; export EXPECT
; \
2769 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2770 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2771 export TCL_LIBRARY
; fi
; \
2772 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2774 check-gcc
: testsuite
/site.exp
2775 -rootme
=`pwd`; export rootme
; \
2776 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2778 EXPECT
=${EXPECT} ; export EXPECT
; \
2779 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2780 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2781 export TCL_LIBRARY
; fi
; \
2782 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2784 check-g77
: testsuite
/site.exp
2785 -rootme
=`pwd`; export rootme
; \
2786 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2788 EXPECT
=${EXPECT} ; export EXPECT
; \
2789 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2790 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2791 export TCL_LIBRARY
; fi
; \
2792 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2794 check-objc
: testsuite
/site.exp
2795 -rootme
=`pwd`; export rootme
; \
2796 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2798 EXPECT
=${EXPECT} ; export EXPECT
; \
2799 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2800 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2801 export TCL_LIBRARY
; fi
; \
2802 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2804 # These exist for maintenance purposes.
2806 # Update the tags table.
2810 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2811 etags
*.y
*.h
*.c
; \
2815 # Create the distribution tar.gz file.
2817 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2818 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2820 tmp-gcc.xtar
: distdir
2821 # Make the distribution.
2822 tar -chf tmp-gcc.xtar gcc-
$(version
)
2825 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2827 # This target exists to do the initial work before the language specific
2829 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2830 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2831 $(srcdir)/version.c TAGS
2832 @case
'$(USE_NLS)' in \
2834 *) echo
"configure with --enable-nls before making a distribution"; \
2837 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2839 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2841 # Update the version number in README
2842 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2843 { $$6 = version; print $$0 } \
2844 $$1 " " $$2 " " $$3 != "This directory contains"' \
2845 version
=$(version
) $(srcdir)/README
> tmp.README
2846 mv tmp.README README
2847 -rm -rf gcc-
$(version
) tmp
2848 # Put all the files in a temporary subdirectory
2849 # which has the name that we want to have in the tar file.
2856 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2857 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2859 if
test "$(srcdir)" != "." ; then \
2860 for file in c-parse.c cexp.c
; do \
2861 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2864 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2865 if
test -d
$(srcdir)/config
/$$file \
2866 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2867 mkdir tmp
/config
/$$file; \
2868 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2869 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2872 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2875 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2876 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2878 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2879 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2881 $(LN_S
) .gdbinit tmp
2883 # Finish making `distdir', after the languages have done their thing.
2885 mv tmp gcc-
$(version
)
2886 # Get rid of everything we don't want in the distribution. We'd want
2887 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2889 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2892 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2893 < po
/POTFILES.in
> tmp.POTFILES
2894 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2895 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2896 diff tmp.POTFILES tmp.src ||
{ \
2897 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2902 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2903 lang.distdir distdir-finish
2905 # make diff oldversion=M.N
2906 # creates a diff file between an older distribution and this one.
2907 # The -P option assumes this is GNU diff.
2909 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2910 -x cexp.c
-x
-x TAGS
-x INSTALL \
2911 -x configure
-x config.in \
2912 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2913 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2914 $(LANG_DIFF_EXCLUDES
) \
2915 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2917 bootstrap bootstrap-lean
: force
2918 # Only build the C compiler for stage1, because that is the only one that
2919 # we can guarantee will build with the native compiler, and also it is the
2920 # only thing useful for building stage2.
2921 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2923 # This used to define ALLOCA as empty, but that would lead to bad results
2924 # for a subsequent `make install' since that would not have ALLOCA empty.
2925 # To prevent `make install' from compiling alloca.o and then relinking cc1
2926 # because alloca.o is newer, we permit these recursive makes to compile
2927 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2928 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2930 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2931 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2933 bootstrap2 bootstrap2-lean
: force
2934 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2936 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2937 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2939 bootstrap3 bootstrap3-lean
: force
2940 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2942 bootstrap4 bootstrap4-lean
: force
2943 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2945 # Compare the object files in the current directory with those in the
2948 # ./ avoids bug in some versions of tail.
2949 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2951 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2952 for file in
*$(objext
); do \
2953 tail
+16c .
/$$file > tmp-foo1
; \
2954 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2955 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2957 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2958 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2959 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2960 for file in
$$dir/*$(objext
); do \
2961 tail
+16c .
/$$file > tmp-foo1
; \
2962 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2963 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2968 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2969 if
[ -f .bad_compare
]; then \
2970 echo
"Bootstrap comparison failure!"; \
2975 *-lean
) rm -rf stage
$$stage ;; \
2980 # Compare the object files in the current directory with those in the
2981 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2982 # running tail and the overhead of twice copying each object file.
2984 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
2986 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2987 for file in
*$(objext
); do \
2988 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2990 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2991 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2992 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2993 for file in
$$dir/*$(objext
); do \
2994 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2998 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2999 if
[ -f .bad_compare
]; then \
3000 echo
"Bootstrap comparison failure!"; \
3005 *-lean
) rm -rf stage
$$stage ;; \
3009 # Copy the object files from a particular stage into a subdirectory.
3011 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
3012 -for
dir in intl
$(SUBDIRS
) ; \
3014 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
3016 -mv
$(STAGESTUFF
) stage1
3017 -mv intl
/*$(objext
) stage1
/intl
3018 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3019 # dir will work properly.
3020 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3021 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3022 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3023 -rm -f stage1
/libgcc.a
3025 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3026 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3028 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3029 cp stage1
/$${f} .
; \
3032 stage1
: force stage1-start lang.stage1
3035 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3036 -for
dir in intl
$(SUBDIRS
) ; \
3038 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3040 -mv
$(STAGESTUFF
) stage2
3041 -mv intl
/*$(objext
) stage2
/intl
3042 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3043 # dir will work properly.
3044 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3045 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3046 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3047 -rm -f stage2
/libgcc.a
3049 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3050 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3052 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3053 cp stage2
/$${f} .
; \
3056 stage2
: force stage2-start lang.stage2
3059 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3060 -for
dir in intl
$(SUBDIRS
) ; \
3062 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3064 -mv
$(STAGESTUFF
) stage3
3065 -mv intl
/*$(objext
) stage3
/intl
3066 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3067 # dir will work properly.
3068 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3069 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3070 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3071 -rm -f stage3
/libgcc.a
3073 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3074 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3076 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3077 cp stage3
/$${f} .
; \
3080 stage3
: force stage3-start lang.stage3
3083 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3084 -for
dir in intl
$(SUBDIRS
) ; \
3086 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3088 -mv
$(STAGESTUFF
) stage4
3089 -mv intl
/*$(objext
) stage4
/intl
3090 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3091 # dir will work properly.
3092 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3093 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3094 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3095 -rm -f stage4
/libgcc.a
3097 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3098 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3100 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3101 cp stage4
/$${f} .
; \
3104 stage4
: force stage4-start lang.stage4
3106 # Copy just the executable files from a particular stage into a subdirectory,
3107 # and delete the object files. Use this if you're just verifying a version
3108 # that is pretty sure to work, and you are short of disk space.
3109 risky-stage1
: stage1
3112 risky-stage2
: stage2
3115 risky-stage3
: stage3
3118 risky-stage4
: stage4
3121 #In GNU Make, ignore whether `stage*' exists.
3122 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3123 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3128 # The enquire rules are still useful for building new float-anything.h.
3129 # Special flags for compiling enquire.
3130 # We disable optimization to make floating point more reliable.
3131 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3132 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3134 # Enquire target (This is a variable so that a target can choose not to
3138 # Test to see whether <float.h> exists in the system header files,
3139 # and is not derived from GCC.
3141 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3142 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3145 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3146 # to ensure, we're emitting a full blown <float.h> ourselves.
3147 FLOAT_H_TEST
= false
3149 # Used to compile enquire with standard cc, but have forgotten why.
3150 # Let's try with GCC.
3151 enquire
: enquire.o
$(GCC_PARTS
)
3152 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3153 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3154 if
$(FLOAT_H_TEST
); then \
3155 rm -f
include/float.h
; \
3156 SYS_FLOAT_H_WRAP
=1; \
3158 SYS_FLOAT_H_WRAP
=0; \
3160 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3161 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3162 -I.
-c
$(srcdir)/enquire.c
3164 # Create float.h source for the native machine.
3165 # Make it empty if we can use the system float.h without changes.
3166 float.h-nat
: enquire
3167 -.
/enquire
-f
> tmp-float.h
3168 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3169 mv tmp-float.h float.h-nat
3171 # Create a dummy float.h source for a cross-compiler.
3172 # ??? This isn't used anymore. Should we create config/float-unkn.h
3173 # and make that the default float_format in configure?
3175 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3176 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3177 echo
"#endif" >> t-float.h-cross
3178 mv t-float.h-cross float.h-cross