gcc/config.gcc

   1 # GCC target-specific configuration file.
   2 # Copyright 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
   3 # Free Software Foundation, Inc.
   4
   5 #This file is part of GCC.
   6
   7 #GCC is free software; you can redistribute it and/or modify it under
   8 #the terms of the GNU General Public License as published by the Free
   9 #Software Foundation; either version 2, or (at your option) any later
  10 #version.
  11
  12 #GCC is distributed in the hope that it will be useful, but WITHOUT
  13 #ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  14 #FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  15 #for more details.
  16
  17 #You should have received a copy of the GNU General Public License
  18 #along with GCC; see the file COPYING.  If not, write to the Free
  19 #Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
  20 #02110-1301, USA.
  21
  22 # This is the GCC target-specific configuration file
  23 # where a configuration type is mapped to different system-specific
  24 # definitions and files.  This is invoked by the autoconf-generated
  25 # configure script.  Putting it in a separate shell file lets us skip
  26 # running autoconf when modifying target-specific information.
  27
  28 # This file switches on the shell variable ${target}, and also uses the
  29 # following shell variables:
  30 #
  31 #  with_*               Various variables as set by configure.
  32 #
  33 #  enable_threads       Either the name, yes or no depending on whether
  34 #                       threads support was requested.
  35 #
  36 #  default_use_cxa_atexit
  37 #                         The default value for the $enable___cxa_atexit
  38 #                       variable.  enable___cxa_atexit needs to be set to
  39 #                       "yes" for the correct operation of C++ destructors
  40 #                       but it relies upon the presence of a non-standard C
  41 #                       library function called __cxa_atexit.
  42 #                         Since not all C libraries provide __cxa_atexit the
  43 #                       default value of $default_use_cxa_atexit is set to
  44 #                       "no" except for targets which are known to be OK.
  45 #
  46 #  gas_flag             Either yes or no depending on whether GNU as was
  47 #                       requested.
  48 #
  49 #  gnu_ld_flag          Either yes or no depending on whether GNU ld was
  50 #                       requested.
  51
  52 # This file sets the following shell variables for use by the
  53 # autoconf-generated configure script:
  54 #
  55 #  cpu_type             The name of the cpu, if different from the first
  56 #                       chunk of the canonical target name.
  57 #
  58 #  tm_defines           List of target macros to define for all compilations.
  59 #
  60 #  tm_file              A list of target macro files, if different from
  61 #                       "$cpu_type/$cpu_type.h". Usually it's constructed
  62 #                       per target in a way like this:
  63 #                       tm_file="${tm_file} dbxelf.h elfos.h svr4.h ${cpu_type.h}/elf.h"
  64 #                       Note that the preferred order is:
  65 #                       - specific target header "${cpu_type}/${cpu_type.h}"
  66 #                       - generic headers like dbxelf.h elfos.h, etc.
  67 #                       - specializing target headers like ${cpu_type.h}/elf.h
  68 #                       This helps to keep OS specific stuff out of the CPU
  69 #                       defining header ${cpu_type}/${cpu_type.h}.
  70 #
  71 #  tm_p_file            Location of file with declarations for functions
  72 #                       in $out_file.
  73 #
  74 #  out_file             The name of the machine description C support
  75 #                       file, if different from "$cpu_type/$cpu_type.c".
  76 #
  77 #  md_file              The name of the machine-description file, if
  78 #                       different from "$cpu_type/$cpu_type.md".
  79 #
  80 #  tmake_file           A list of machine-description-specific
  81 #                       makefile-fragments, if different from
  82 #                       "$cpu_type/t-$cpu_type".
  83 #
  84 #  extra_modes          The name of the file containing a list of extra
  85 #                       machine modes, if necessary and different from
  86 #                       "$cpu_type/$cpu_type-modes.def".
  87 #
  88 #  extra_objs           List of extra objects that should be linked into
  89 #                       the compiler proper (cc1, cc1obj, cc1plus)
  90 #                       depending on target.
  91 #
  92 #  extra_gcc_objs       List of extra objects that should be linked into
  93 #                       the compiler driver (gcc) depending on target.
  94 #
  95 #  extra_headers        List of used header files from the directory
  96 #                       config/${cpu_type}.
  97 #
  98 #  extra_passes         List of extra executables compiled for this target
  99 #                       machine, used for compiling from source to object.
 100 #
 101 #  extra_parts          List of extra object files that should be compiled
 102 #                       for this target machine.
 103 #
 104 #  extra_programs       Like extra_passes, but these are used when linking.
 105 #
 106 #  extra_options        List of target-dependent .opt files.
 107 #
 108 #  c_target_objs        List of extra target-dependent objects that be
 109 #                       linked into the C compiler only.
 110 #
 111 #  cxx_target_objs      List of extra target-dependent objects that be
 112 #                       linked into the C++ compiler only.
 113 #
 114 #  target_gtfiles       List of extra source files with type information.
 115 #
 116 #  xm_defines           List of macros to define when compiling for the
 117 #                       target machine.
 118 #
 119 #  xm_file              List of files to include when compiling for the
 120 #                       target machine.
 121 #
 122 #  use_collect2         Set to yes or no, depending on whether collect2
 123 #                       will be used.
 124 #
 125 #  target_cpu_default   Set to override the default target model.
 126 #
 127 #  gdb_needs_out_file_path
 128 #                       Set to yes if gdb needs a dir command with
 129 #                       `dirname $out_file`.
 130 #
 131 #  thread_file          Set to control which thread package to use.
 132 #
 133 #  gas                  Set to yes or no depending on whether the target
 134 #                       system normally uses GNU as.
 135 #
 136 #  need_64bit_hwint     Set to yes if HOST_WIDE_INT must be 64 bits wide
 137 #                       for this target.  This is true iff this target
 138 #                       supports "long" or "wchar_t" wider than 32 bits.
 139 #
 140 #  configure_default_options
 141 #                       Set to an initializer for configure_default_options
 142 #                       in configargs.h, based on --with-cpu et cetera.
 143 #
 144 #  use_fixproto         Set to "yes" if fixproto should be run normally,
 145 #                       "no" if fixproto should never be run.
 146
 147 # The following variables are used in each case-construct to build up the
 148 # outgoing variables:
 149 #
 150 #  gnu_ld               Set to yes or no depending on whether the target
 151 #                       system normally uses GNU ld.
 152
 153 out_file=
 154 tmake_file=
 155 extra_headers=
 156 extra_passes=
 157 extra_parts=
 158 extra_programs=
 159 extra_objs=
 160 extra_gcc_objs=
 161 extra_options=
 162 c_target_objs=
 163 cxx_target_objs=
 164 tm_defines=
 165 xm_defines=
 166 # Set this to force installation and use of collect2.
 167 use_collect2=
 168 # Set this to override the default target model.
 169 target_cpu_default=
 170 # Set this if gdb needs a dir command with `dirname $out_file`
 171 gdb_needs_out_file_path=
 172 # Set this to control which thread package will be used.
 173 thread_file=
 174 # Reinitialize these from the flag values every loop pass, since some
 175 # configure entries modify them.
 176 gas="$gas_flag"
 177 gnu_ld="$gnu_ld_flag"
 178 default_use_cxa_atexit=no
 179 target_gtfiles=
 180 need_64bit_hwint=
 181
 182 # Default to not using fixproto.  Targets which need fixproto should
 183 # specifically set this to 'yes'.
 184 use_fixproto=no
 185
 186 # Don't carry these over build->host->target.  Please.
 187 xm_file=
 188 md_file=
 189
 190 # Obsolete configurations.
 191 case ${target} in
 192    c4x-*                \
 193  | tic4x-*              \
 194  )
 195     if test "x$enable_obsolete" != xyes; then
 196       echo "*** Configuration ${target} is obsolete." >&2
 197       echo "*** Specify --enable-obsolete to build it anyway." >&2
 198       echo "*** Support will be REMOVED in the next major release of GCC," >&2
 199       echo "*** unless a maintainer comes forward." >&2
 200       exit 1
 201     fi;;
 202 esac
 203
 204 # Unsupported targets list.  Do not put an entry in this list unless
 205 # it would otherwise be caught by a more permissive pattern.  The list
 206 # should be in alphabetical order.
 207 case ${target} in
 208    alpha*-*-linux*libc1*                \
 209  | i[34567]86-sequent-sysv              \
 210  | i[34567]86-sequent-sysv[123]*        \
 211  | i[34567]86-go32-*                    \
 212  | i[34567]86-*-go32*                   \
 213  | m68k-*-linux*aout*                   \
 214  | m68k-*-linux*libc1*                  \
 215  | mips64orion*-*-rtems*                \
 216  | powerpc-*-linux*libc1*               \
 217  | sparc-*-linux*aout*                  \
 218  | sparc-*-linux*libc1*                 \
 219  | sparc-hal-solaris2*                  \
 220  | thumb-*-*                            \
 221  | *-*-linux*coff*                      \
 222  | *-*-linux*oldld*                     \
 223  | *-*-rtemsaout*                       \
 224  | *-*-rtemscoff*                       \
 225  | vax-*-vms*                           \
 226  )
 227         echo "*** Configuration ${target} not supported" 1>&2
 228         exit 1
 229         ;;
 230 esac
 231
 232 # Set default cpu_type, tm_file, tm_p_file and xm_file so it can be
 233 # updated in each machine entry.  Also set default extra_headers for some
 234 # machines.
 235 tm_p_file=
 236 cpu_type=`echo ${target} | sed 's/-.*$//'`
 237 cpu_is_64bit=
 238 case ${target} in
 239 m32c*-*-*)
 240         cpu_type=m32c
 241         tmake_file=m32c/t-m32c
 242         ;;
 243 alpha*-*-*)
 244         cpu_type=alpha
 245         need_64bit_hwint=yes
 246         ;;
 247 am33_2.0-*-linux*)
 248         cpu_type=mn10300
 249         ;;
 250 strongarm*-*-*)
 251         cpu_type=arm
 252         ;;
 253 arm*-*-*)
 254         cpu_type=arm
 255         extra_headers="mmintrin.h"
 256         ;;
 257 bfin*-*)
 258         cpu_type=bfin
 259         ;;
 260 ep9312*-*-*)
 261         cpu_type=arm
 262         ;;
 263 frv*)   cpu_type=frv
 264         ;;
 265 xscale-*-*)
 266         cpu_type=arm
 267         extra_headers="mmintrin.h"
 268         ;;
 269 i[34567]86-*-*)
 270         cpu_type=i386
 271         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 272         ;;
 273 x86_64-*-*)
 274         cpu_type=i386
 275         extra_headers="mmintrin.h mm3dnow.h xmmintrin.h emmintrin.h pmmintrin.h"
 276         need_64bit_hwint=yes
 277         ;;
 278 ia64-*-*)
 279         extra_headers=ia64intrin.h
 280         need_64bit_hwint=yes
 281         ;;
 282 hppa*-*-* | parisc*-*-*)
 283         cpu_type=pa
 284         ;;
 285 m32r*-*-*)
 286         cpu_type=m32r
 287         ;;
 288 m680[012]0-*-*)
 289         cpu_type=m68k
 290         extra_headers=math-68881.h
 291         ;;
 292 m68k-*-*)
 293         extra_headers=math-68881.h
 294         ;;
 295 mips*-*-*)
 296         cpu_type=mips
 297         need_64bit_hwint=yes
 298         ;;
 299 powerpc*-*-*)
 300         cpu_type=rs6000
 301         extra_headers="ppc-asm.h altivec.h spe.h"
 302         need_64bit_hwint=yes
 303         case x$with_cpu in
 304             xpowerpc64|xdefault64|x6[23]0|x970|xG5|xpower[3456]|xrs64a)
 305                 cpu_is_64bit=yes
 306                 ;;
 307         esac
 308         ;;
 309 rs6000*-*-*)
 310         need_64bit_hwint=yes
 311         ;;
 312 sparc64*-*-*)
 313         cpu_type=sparc
 314         need_64bit_hwint=yes
 315         ;;
 316 sparc*-*-*)
 317         cpu_type=sparc
 318         ;;
 319 s390*-*-*)
 320         cpu_type=s390
 321         need_64bit_hwint=yes
 322         ;;
 323 # Note the 'l'; we need to be able to match e.g. "shle" or "shl".
 324 sh[123456789lbe]*-*-*)
 325         cpu_type=sh
 326         need_64bit_hwint=yes
 327         ;;
 328 tic4x-*-*)
 329         cpu_type=c4x
 330         ;;
 331 esac
 332
 333 tm_file=${cpu_type}/${cpu_type}.h
 334 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-protos.h
 335 then
 336         tm_p_file=${cpu_type}/${cpu_type}-protos.h
 337 fi
 338 extra_modes=
 339 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}-modes.def
 340 then
 341         extra_modes=${cpu_type}/${cpu_type}-modes.def
 342 fi
 343 if test -f ${srcdir}/config/${cpu_type}/${cpu_type}.opt
 344 then
 345         extra_options="${extra_options} ${cpu_type}/${cpu_type}.opt"
 346 fi
 347
 348 case ${target} in
 349 x86_64-*-*)
 350         tm_file="i386/biarch64.h ${tm_file}"
 351         ;;
 352 esac
 353
 354 # On a.out targets, we need to use collect2.
 355 case ${target} in
 356 *-*-*aout*)
 357         use_collect2=yes
 358         ;;
 359 esac
 360
 361 # Common parts for widely ported systems.
 362 case ${target} in
 363 *-*-darwin*)
 364   tm_file="${tm_file} darwin.h ${cpu_type}/darwin.h"
 365   tm_p_file="${tm_p_file} darwin-protos.h"
 366   tmake_file="t-darwin ${cpu_type}/t-darwin t-slibgcc-darwin"
 367   target_gtfiles="\$(srcdir)/config/darwin.c"
 368   extra_options="${extra_options} darwin.opt"
 369   c_target_objs="darwin-c.o"
 370   cxx_target_objs="darwin-c.o"
 371   extra_objs="darwin.o"
 372   default_use_cxa_atexit=yes
 373   case ${enable_threads} in
 374     "" | yes | posix) thread_file='posix' ;;
 375   esac
 376   ;;
 377 *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
 378   # This is the place-holder for the generic a.out configuration
 379   # of FreeBSD.  No actual configuration resides here since
 380   # there was only ever a bare-bones ix86 configuration for
 381   # a.out and it exists solely in the machine-specific section.
 382   # This place-holder must exist to avoid dropping into
 383   # the generic ELF configuration of FreeBSD (i.e. it must be
 384   # ordered before that section).
 385   ;;
 386 *-*-freebsd*)
 387   # This is the generic ELF configuration of FreeBSD.  Later
 388   # machine-specific sections may refine and add to this
 389   # configuration.
 390   #
 391   # Due to tm_file entry ordering issues that vary between cpu
 392   # architectures, we only define fbsd_tm_file to allow the
 393   # machine-specific section to dictate the final order of all
 394   # entries of tm_file with the minor exception that components
 395   # of the tm_file set here will always be of the form:
 396   #
 397   # freebsd<version_number>.h [freebsd-<conf_option>.h ...] freebsd-spec.h freebsd.h
 398   #
 399   # The machine-specific section should not tamper with this
 400   # ordering but may order all other entries of tm_file as it
 401   # pleases around the provided core setting.
 402   gas=yes
 403   gnu_ld=yes
 404   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
 405   case ${target} in
 406     *-*-freebsd3 | *-*-freebsd[3].*)
 407       tm_defines="${tm_defines} FBSD_MAJOR=3" ;;
 408     *-*-freebsd4 | *-*-freebsd[4].*)
 409       tm_defines="${tm_defines} FBSD_MAJOR=4" ;;
 410     *-*-freebsd5 | *-*-freebsd[5].*)
 411       tm_defines="${tm_defines} FBSD_MAJOR=5" ;;
 412     *-*-freebsd6 | *-*-freebsd[6].*)
 413       tm_defines="${tm_defines} FBSD_MAJOR=6" ;;
 414     *-*-freebsd7 | *-*-freebsd[7].*)
 415       tm_defines="${tm_defines} FBSD_MAJOR=7" ;;
 416     *-*-freebsd8 | *-*-freebsd[8].*)
 417       tm_defines="${tm_defines} FBSD_MAJOR=8" ;;
 418     *-*-freebsd9 | *-*-freebsd[9].*)
 419       tm_defines="${tm_defines} FBSD_MAJOR=9" ;;
 420     *)
 421       echo 'Please update *-*-freebsd* in gcc/config.gcc'
 422       exit 1
 423       ;;
 424   esac
 425   tmake_file="t-slibgcc-elf-ver t-freebsd"
 426   case ${enable_threads} in
 427     no)
 428       fbsd_tm_file="${fbsd_tm_file} freebsd-nthr.h"
 429       ;;
 430     "" | yes | posix)
 431       thread_file='posix'
 432       tmake_file="${tmake_file} t-freebsd-thread"
 433       # Before 5.0, FreeBSD can't bind shared libraries to -lc
 434       # when "optionally" threaded via weak pthread_* checks.
 435       case ${target} in
 436         *-*-freebsd[34] | *-*-freebsd[34].*)
 437           tmake_file="${tmake_file} t-slibgcc-nolc-override"
 438           ;;
 439       esac
 440       ;;
 441     *)
 442       echo 'Unknown thread configuration for FreeBSD'
 443       exit 1
 444       ;;
 445   esac
 446   fbsd_tm_file="${fbsd_tm_file} freebsd-spec.h freebsd.h"
 447   ;;
 448 *-*-linux*libc1* | *-*-linux*aout*)
 449   # Avoid the generic linux case.
 450   ;;
 451 *-*-linux* | frv-*-*linux* | *-*-kfreebsd*-gnu | *-*-knetbsd*-gnu)
 452   # Must come before *-*-gnu* (because of *-*-linux-gnu* systems).
 453   extra_parts="crtbegin.o crtbeginS.o crtbeginT.o crtend.o crtendS.o"
 454   extra_options="${extra_options} linux.opt"
 455   gas=yes
 456   gnu_ld=yes
 457   case ${enable_threads} in
 458     "" | yes | posix) thread_file='posix' ;;
 459   esac
 460   tmake_file="t-slibgcc-elf-ver t-linux"
 461   case ${target} in
 462     *-*-*uclibc*)
 463       tm_defines="${tm_defines} UCLIBC_DEFAULT=1"
 464       ;;
 465     *)
 466       tm_defines="${tm_defines} UCLIBC_DEFAULT=0"
 467       ;;
 468   esac
 469   # Assume that glibc or uClibc are being used and so __cxa_atexit is provided.
 470   default_use_cxa_atexit=yes
 471   ;;
 472 *-*-gnu*)
 473   # On the Hurd, the setup is just about the same on
 474   # each different CPU.  The specific machines that we
 475   # support are matched above and just set $cpu_type.
 476   tm_file="${cpu_type}/gnu.h"
 477   extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 478   # GNU tools are the only tools.
 479   gas=yes
 480   gnu_ld=yes
 481   # These details are the same as for Linux.
 482   # But here we need a little extra magic.
 483   tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
 484   case ${target} in
 485     alpha*)
 486       tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
 487       ;;
 488     i[34567]86-*-*)
 489       tm_file="${cpu_type}/${cpu_type}.h i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h gnu.h ${tm_file}"
 490       ;;
 491   esac
 492   # Assume that glibc is being used and so __cxa_atexit is provided.
 493   default_use_cxa_atexit=yes
 494   ;;
 495 *-*-netbsd*)
 496   tmake_file="t-slibgcc-elf-ver t-libc-ok t-netbsd t-libgcc-pic"
 497   gas=yes
 498   gnu_ld=yes
 499
 500   # NetBSD 2.0 and later get POSIX threads enabled by default.
 501   # Allow them to be explicitly enabled on any other version.
 502   case ${enable_threads} in
 503     "")
 504       case ${target} in
 505         *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 506           thread_file='posix'
 507           tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 508           ;;
 509       esac
 510       ;;
 511     yes | posix)
 512       thread_file='posix'
 513       tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
 514       ;;
 515   esac
 516
 517   # NetBSD 1.7 and later are set up to use GCC's crtstuff for
 518   # ELF configurations.  We will clear extra_parts in the
 519   # a.out configurations.
 520   case ${target} in
 521     *-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 522       extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 523       ;;
 524   esac
 525
 526   # NetBSD 2.0 and later provide __cxa_atexit(), which we use by
 527   # default (unless overridden by --disable-__cxa_atexit).
 528   case ${target} in
 529     *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
 530       default_use_cxa_atexit=yes
 531       ;;
 532   esac
 533   ;;
 534 *-*-openbsd*)
 535   tmake_file="t-libc-ok t-openbsd t-libgcc-pic"
 536   case ${enable_threads} in
 537     yes)
 538       thread_file='posix'
 539       tmake_file="${tmake_file} t-openbsd-thread"
 540       ;;
 541   esac
 542   case ${target} in
 543     *-*-openbsd2.*|*-*-openbsd3.[012])
 544       tm_defines="${tm_defines} HAS_LIBC_R=1" ;;
 545   esac
 546   ;;
 547 *-*-rtems*)
 548   case ${enable_threads} in
 549     yes) thread_file='rtems' ;;
 550   esac
 551   ;;
 552 *-*-vxworks*)
 553   tmake_file=t-vxworks
 554   tm_file="${tm_file} elfos.h svr4.h"
 555   xm_defines=POSIX
 556   extra_options="${extra_options} vxworks.opt"
 557   case ${enable_threads} in
 558     no) ;;
 559     "" | yes | vxworks) thread_file='vxworks' ;;
 560     *) echo 'Unknown thread configuration for VxWorks'; exit 1 ;;
 561   esac
 562   ;;
 563 *-*-elf)
 564   # Assume that newlib is being used and so __cxa_atexit is provided.
 565   default_use_cxa_atexit=yes
 566   ;;
 567 esac
 568
 569 case ${target} in
 570 # Support site-specific machine types.
 571 *local*)
 572         rest=`echo ${target} | sed -e "s/$cpu_type-//"`
 573         tm_file=${cpu_type}/$rest.h
 574         if test -f $srcdir/config/${cpu_type}/xm-$rest.h
 575         then xm_file=${cpu_type}/xm-$rest.h
 576         fi
 577         if test -f $srcdir/config/${cpu_type}/t-$rest
 578         then tmake_file=${cpu_type}/t-$rest
 579         fi
 580         ;;
 581 alpha*-*-unicosmk*)
 582         use_collect2=yes
 583         tm_file="${tm_file} alpha/unicosmk.h"
 584
 585         # Don't include t-ieee for now because we don't support that yet
 586         # tmake_file="alpha/t-ieee"
 587         tmake_file="alpha/t-unicosmk"
 588         use_fixproto=yes
 589         ;;
 590 alpha*-*-linux*)
 591         tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
 592         target_cpu_default="MASK_GAS"
 593         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee alpha/t-linux"
 594         ;;
 595 alpha*-*-gnu*)
 596         target_cpu_default="MASK_GAS"
 597         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 598         ;;
 599 alpha*-*-freebsd*)
 600         tm_file="${tm_file} ${fbsd_tm_file} alpha/elf.h alpha/freebsd.h"
 601         target_cpu_default="MASK_GAS"
 602         tmake_file="${tmake_file} alpha/t-crtfm alpha/t-alpha alpha/t-ieee"
 603         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
 604         ;;
 605 alpha*-*-netbsd*)
 606         tm_file="${tm_file} netbsd.h alpha/elf.h netbsd-elf.h alpha/netbsd.h"
 607         target_cpu_default="MASK_GAS"
 608         tmake_file="${tmake_file} alpha/t-alpha alpha/t-ieee"
 609         ;;
 610 alpha*-*-openbsd*)
 611         tm_defines="${tm_defines} OBSD_NO_DYNAMIC_LIBRARIES OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_FUNCTION_SIZE OBSD_HAS_DECLARE_OBJECT"
 612         tm_file="alpha/alpha.h openbsd.h alpha/openbsd.h"
 613         # default x-alpha is only appropriate for dec-osf.
 614         target_cpu_default="MASK_GAS"
 615         tmake_file="alpha/t-alpha alpha/t-ieee"
 616         ;;
 617 alpha*-dec-osf[45]*)
 618         if test x$stabs = xyes
 619         then
 620                 tm_file="${tm_file} dbx.h"
 621         fi
 622         if test x$gas != xyes
 623         then
 624                 extra_passes="mips-tfile mips-tdump"
 625         fi
 626         use_collect2=yes
 627         tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
 628         tm_file="${tm_file} alpha/osf.h"
 629         extra_headers=va_list.h
 630         case ${target} in
 631           *-*-osf4*)
 632             # Define TARGET_SUPPORT_ARCH except on 4.0a.
 633             case ${target} in
 634                 *-*-osf4.0a) ;;
 635                 *) tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 636             esac
 637             ;;
 638           *-*-osf5*)
 639             tm_file="${tm_file} alpha/osf5.h"
 640             tm_defines="${tm_defines} TARGET_SUPPORT_ARCH=1"
 641             ;;
 642         esac
 643         case ${enable_threads} in
 644           "" | yes | posix)
 645             thread_file='posix'
 646             tmake_file="${tmake_file} alpha/t-osf-pthread"
 647             ;;
 648         esac
 649         ;;
 650 alpha64-dec-*vms*)
 651         tm_file="${tm_file} alpha/vms.h alpha/vms64.h"
 652         xm_file="alpha/xm-vms.h"
 653         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-vms64 alpha/t-ieee"
 654         prefix=/gnu
 655         local_prefix=/gnu
 656         ;;
 657 alpha*-dec-*vms*)
 658         tm_file="${tm_file} alpha/vms.h"
 659         xm_file=alpha/xm-vms.h
 660         tmake_file="alpha/t-alpha alpha/t-vms alpha/t-ieee"
 661         prefix=/gnu
 662         local_prefix=/gnu
 663         ;;
 664 arc-*-elf*)
 665         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 666         extra_parts="crtinit.o crtfini.o"
 667         use_fixproto=yes
 668         ;;
 669 arm-*-coff* | armel-*-coff*)
 670         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h"
 671         tmake_file="arm/t-arm arm/t-arm-coff"
 672         ;;
 673 arm-semi-aof | armel-semi-aof)
 674         tm_file="arm/semiaof.h arm/aof.h arm/arm.h"
 675         tmake_file="arm/t-arm arm/t-semi"
 676         ;;
 677 arm-wrs-vxworks)
 678         tm_file="dbxelf.h elfos.h svr4.h vxworks.h arm/elf.h arm/aout.h arm/arm.h arm/vxworks.h"
 679         tmake_file="${tmake_file} arm/t-arm arm/t-vxworks"
 680         ;;
 681 arm*-*-freebsd*|strongarm*-*-freebsd*)
 682         tm_file="dbxelf.h elfos.h ${fbsd_tm_file} arm/elf.h arm/aout.h arm/freebsd.h arm/arm.h"
 683         tmake_file="${tmake_file} arm/t-arm arm/t-strongarm-elf"
 684         ;;
 685 arm*-*-netbsdelf*)
 686         tm_file="dbxelf.h elfos.h netbsd.h netbsd-elf.h arm/elf.h arm/aout.h arm/arm.h arm/netbsd-elf.h"
 687         tmake_file="${tmake_file} arm/t-arm arm/t-netbsd"
 688         ;;
 689 arm*-*-netbsd*)
 690         tm_file="arm/aout.h arm/arm.h netbsd.h netbsd-aout.h arm/netbsd.h"
 691         tmake_file="t-netbsd arm/t-arm arm/t-netbsd"
 692         extra_parts=""
 693         use_collect2=yes
 694         ;;
 695 arm*-*-linux*)                  # ARM GNU/Linux with ELF
 696         tm_file="dbxelf.h elfos.h linux.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
 697         tmake_file="${tmake_file} t-linux arm/t-arm"
 698         case ${target} in
 699         arm*-*-linux-*eabi)
 700             tm_file="$tm_file arm/bpabi.h arm/linux-eabi.h"
 701             tmake_file="$tmake_file arm/t-arm-elf arm/t-bpabi arm/t-linux-eabi"
 702             # The BPABI long long divmod functions return a 128-bit value in
 703             # registers r0-r3.  Correctly modeling that requires the use of
 704             # TImode.
 705             need_64bit_hwint=yes
 706             # The EABI requires the use of __cxa_atexit.
 707             default_use_cxa_atexit=yes
 708             ;;
 709         *)
 710             tmake_file="$tmake_file arm/t-linux"
 711             ;;
 712         esac
 713         tm_file="$tm_file arm/aout.h arm/arm.h"
 714         ;;
 715 arm*-*-uclinux*)                # ARM ucLinux
 716         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/linux-gas.h arm/linux-elf.h arm/uclinux-elf.h"
 717         tmake_file="arm/t-arm arm/t-arm-elf"
 718         ;;
 719 arm*-*-ecos-elf)
 720         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/ecos-elf.h"
 721         tmake_file="arm/t-arm arm/t-arm-elf"
 722         ;;
 723 arm*-*-eabi* | arm*-*-symbianelf* )
 724         # The BPABI long long divmod functions return a 128-bit value in
 725         # registers r0-r3.  Correctly modeling that requires the use of
 726         # TImode.
 727         need_64bit_hwint=yes
 728         default_use_cxa_atexit=yes
 729         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/bpabi.h"
 730         tmake_file="arm/t-arm arm/t-arm-elf"
 731         case ${target} in
 732         arm*-*-eabi*)
 733           tmake_file="${tmake_file} arm/t-bpabi"
 734           ;;
 735         arm*-*-symbianelf*)
 736           tm_file="${tm_file} arm/symbian.h"
 737           # We do not include t-bpabi for Symbian OS because the system
 738           # provides its own implementation of the BPABI functions.
 739           tmake_file="${tmake_file} arm/t-symbian"
 740           ;;
 741         esac
 742         tm_file="${tm_file} arm/aout.h arm/arm.h"
 743         ;;
 744 arm*-*-rtems*)
 745         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h arm/rtems-elf.h rtems.h"
 746         tmake_file="arm/t-arm arm/t-arm-elf t-rtems arm/t-rtems"
 747         ;;
 748 arm*-*-elf | ep9312-*-elf)
 749         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
 750         tmake_file="arm/t-arm arm/t-arm-elf"
 751         ;;
 752 arm*-wince-pe*)
 753         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h arm/wince-pe.h"
 754         tmake_file="arm/t-arm arm/t-wince-pe"
 755         extra_options="${extra_options} arm/pe.opt"
 756         extra_objs="pe.o"
 757         ;;
 758 arm-*-pe*)
 759         tm_file="arm/semi.h arm/aout.h arm/arm.h arm/coff.h dbxcoff.h arm/pe.h"
 760         tmake_file="arm/t-arm arm/t-pe"
 761         extra_options="${extra_options} arm/pe.opt"
 762         extra_objs="pe.o"
 763         ;;
 764 arm*-*-kaos*)
 765         tm_file="dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-arm.h"
 766         tmake_file="arm/t-arm arm/t-arm-elf"
 767         ;;
 768 avr-*-rtems*)
 769         tm_file="avr/avr.h dbxelf.h avr/rtems.h rtems.h"
 770         tmake_file="avr/t-avr t-rtems avr/t-rtems"
 771         ;;
 772 avr-*-*)
 773         tm_file="avr/avr.h dbxelf.h"
 774         use_fixproto=yes
 775         ;;
 776 bfin*-elf*)
 777         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 778         tmake_file=bfin/t-bfin-elf
 779         use_collect2=no
 780         ;;
 781 bfin*-uclinux*)
 782         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h bfin/uclinux.h"
 783         tmake_file=bfin/t-bfin-elf
 784         use_collect2=no
 785         ;;
 786 bfin*-*)
 787         tm_file="${tm_file} dbxelf.h elfos.h bfin/elf.h"
 788         tmake_file=bfin/t-bfin
 789         use_collect2=no
 790         ;;
 791 c4x-*-rtems* | tic4x-*-rtems*)
 792         tmake_file="c4x/t-c4x t-rtems c4x/t-rtems"
 793         tm_file="c4x/c4x.h c4x/rtems.h rtems.h"
 794         c_target_objs="c4x-c.o"
 795         cxx_target_objs="c4x-c.o"
 796         ;;
 797 c4x-* | tic4x-*)
 798         tmake_file=c4x/t-c4x
 799         c_target_objs="c4x-c.o"
 800         cxx_target_objs="c4x-c.o"
 801         ;;
 802 cris-*-aout)
 803         tm_file="dbxelf.h ${tm_file} cris/aout.h"
 804         gas=yes
 805         tmake_file="cris/t-cris cris/t-aout"
 806         extra_options="${extra_options} cris/aout.opt"
 807         ;;
 808 cris-*-elf | cris-*-none)
 809         tm_file="dbxelf.h elfos.h ${tm_file}"
 810         tmake_file="cris/t-cris cris/t-elfmulti"
 811         gas=yes
 812         extra_options="${extra_options} cris/elf.opt"
 813         ;;
 814 cris-*-linux*)
 815         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} linux.h cris/linux.h"
 816         # We need to avoid using t-linux, so override default tmake_file
 817         tmake_file="cris/t-cris t-slibgcc-elf-ver cris/t-linux"
 818         extra_options="${extra_options} cris/linux.opt"
 819         ;;
 820 crx-*-elf)
 821         tm_file="elfos.h ${tm_file}"
 822         extra_parts="crtbegin.o crtend.o"
 823         use_collect2=no
 824         ;;
 825 fr30-*-elf)
 826         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
 827         tmake_file=fr30/t-fr30
 828         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
 829         use_fixproto=yes
 830         ;;
 831 frv-*-elf)
 832         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} frv/frv-abi.h"
 833         tmake_file=frv/t-frv
 834         use_fixproto=yes
 835         ;;
 836 frv-*-*linux*)
 837         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} \
 838                  linux.h frv/linux.h frv/frv-abi.h"
 839         tmake_file="${tmake_file} frv/t-frv frv/t-linux"
 840         ;;
 841 h8300-*-rtemscoff*)
 842         tmake_file="h8300/t-h8300 t-rtems h8300/t-rtems"
 843         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h h8300/rtems.h rtems.h"
 844         ;;
 845 h8300-*-rtems*)
 846         tmake_file="h8300/t-h8300 h8300/t-elf t-rtems h8300/t-rtems"
 847         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h h8300/rtems.h rtems.h"
 848         ;;
 849 h8300-*-elf*)
 850         tmake_file="h8300/t-h8300 h8300/t-elf"
 851         tm_file="h8300/h8300.h dbxelf.h elfos.h h8300/elf.h"
 852         use_fixproto=yes
 853         ;;
 854 h8300-*-*)
 855         tm_file="h8300/h8300.h dbxcoff.h h8300/coff.h"
 856         use_fixproto=yes
 857         ;;
 858 hppa*64*-*-linux* | parisc*64*-*-linux*)
 859         target_cpu_default="MASK_PA_11|MASK_PA_20"
 860         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h svr4.h linux.h \
 861                  pa/pa-linux.h pa/pa64-regs.h pa/pa-64.h pa/pa64-linux.h"
 862         tmake_file="${tmake_file} pa/t-linux64"
 863         gas=yes gnu_ld=yes
 864         need_64bit_hwint=yes
 865         ;;
 866 hppa*-*-linux* | parisc*-*-linux*)
 867         target_cpu_default="MASK_PA_11|MASK_NO_SPACE_REGS"
 868         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h pa/pa-linux.h \
 869                  pa/pa32-regs.h pa/pa32-linux.h"
 870         tmake_file="${tmake_file} pa/t-linux"
 871         # Set the libgcc version number
 872         if test x$sjlj = x1; then
 873             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 874         else
 875             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 876         fi
 877         ;;
 878 # port not yet contributed.
 879 #hppa*-*-openbsd*)
 880 #       target_cpu_default="MASK_PA_11"
 881 #       ;;
 882 hppa1.1-*-pro*)
 883         target_cpu_default="MASK_PORTABLE_RUNTIME|MASK_NO_SPACE_REGS|MASK_SOFT_FLOAT"
 884         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h elfos.h pa/elf.h \
 885                  pa/pa-pro-end.h libgloss.h"
 886         tmake_file="pa/t-pro"
 887         ;;
 888 hppa1.1-*-osf*)
 889         target_cpu_default="MASK_PA_11"
 890         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h pa/pa-osf.h"
 891         tmake_file="pa/t-pa"
 892         use_collect2=yes
 893         ;;
 894 hppa1.1-*-bsd*)
 895         target_cpu_default="MASK_PA_11"
 896         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h"
 897         tmake_file="pa/t-pa"
 898         use_collect2=yes
 899         ;;
 900 hppa[12]*-*-hpux10*)
 901         case ${target} in
 902         hppa1.1-*-* | hppa2*-*-*)
 903                 target_cpu_default="MASK_PA_11"
 904                 ;;
 905         esac
 906         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 907                  pa/pa-hpux.h pa/pa-hpux10.h"
 908         extra_options="${extra_options} pa/pa-hpux.opt"
 909         case ${target} in
 910         *-*-hpux10.[1-9]*)
 911                 tm_file="${tm_file} pa/pa-hpux1010.h"
 912                 extra_options="${extra_options} pa/pa-hpux1010.opt"
 913                 ;;
 914         esac
 915         tmake_file="pa/t-pa-hpux10 pa/t-pa-hpux pa/t-hpux-shlib"
 916         case ${enable_threads} in
 917           "")
 918             if test x$have_pthread_h = xyes ; then
 919               tmake_file="${tmake_file} pa/t-dce-thr"
 920             fi
 921             ;;
 922           yes | dce)
 923             tmake_file="${tmake_file} pa/t-dce-thr"
 924             ;;
 925         esac
 926         # Set the libgcc version number
 927         if test x$sjlj = x1; then
 928             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 929         else
 930             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 931         fi
 932         use_collect2=yes
 933         use_fixproto=yes
 934         gas=yes
 935         ;;
 936 hppa*64*-*-hpux11*)
 937         target_cpu_default="MASK_PA_11|MASK_PA_20"
 938         if test x$gnu_ld = xyes
 939         then
 940                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
 941         fi
 942         tm_file="pa/pa64-start.h ${tm_file} dbxelf.h elfos.h \
 943                  pa/pa64-regs.h pa/pa-hpux.h pa/pa-hpux1010.h \
 944                  pa/pa-hpux11.h"
 945         case ${target} in
 946         *-*-hpux11.[1-9]*)
 947                 tm_file="${tm_file} pa/pa-hpux1111.h pa/pa-64.h pa/pa64-hpux.h"
 948                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 949                 ;;
 950         *)
 951                 tm_file="${tm_file} pa/pa-64.h pa/pa64-hpux.h"
 952                 ;;
 953         esac
 954         extra_options="${extra_options} pa/pa-hpux.opt \
 955                        pa/pa-hpux1010.opt pa/pa64-hpux.opt"
 956         need_64bit_hwint=yes
 957         tmake_file="pa/t-pa64 pa/t-pa-hpux pa/t-hpux-shlib"
 958         # Set the libgcc version number
 959         if test x$sjlj = x1; then
 960             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 961         else
 962             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 963         fi
 964         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o \
 965                      libgcc_stub.a"
 966         case x${enable_threads} in
 967         xyes | xposix )
 968                 thread_file=posix
 969                 ;;
 970         esac
 971         gas=yes
 972         ;;
 973 hppa[12]*-*-hpux11*)
 974         case ${target} in
 975         hppa1.1-*-* | hppa2*-*-*)
 976                 target_cpu_default="MASK_PA_11"
 977                 ;;
 978         esac
 979         tm_file="${tm_file} pa/pa32-regs.h dbxelf.h pa/som.h \
 980                  pa/pa-hpux.h pa/pa-hpux1010.h pa/pa-hpux11.h"
 981         extra_options="${extra_options} pa/pa-hpux.opt pa/pa-hpux1010.opt"
 982         case ${target} in
 983         *-*-hpux11.[1-9]*)
 984                 tm_file="${tm_file} pa/pa-hpux1111.h"
 985                 extra_options="${extra_options} pa/pa-hpux1111.opt"
 986                 ;;
 987         esac
 988         tmake_file="pa/t-pa-hpux11 pa/t-pa-hpux pa/t-hpux-shlib"
 989         # Set the libgcc version number
 990         if test x$sjlj = x1; then
 991             tmake_file="$tmake_file pa/t-slibgcc-sjlj-ver"
 992         else
 993             tmake_file="$tmake_file pa/t-slibgcc-dwarf-ver"
 994         fi
 995         case x${enable_threads} in
 996         xyes | xposix )
 997                 thread_file=posix
 998                 ;;
 999         esac
1000         use_collect2=yes
1001         gas=yes
1002         ;;
1003 i[34567]86-*-darwin*)
1004         # All the configuration is presently done generically.
1005         ;;
1006 i[34567]86-*-elf*)
1007         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h"
1008         tmake_file="i386/t-i386elf t-svr4"
1009         use_fixproto=yes
1010         ;;
1011 i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
1012         if test x$gas = xyes
1013         then
1014                 tm_file="${tm_file} usegas.h"
1015         fi
1016         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
1017         tmake_file=t-svr4
1018         extra_parts="crtbegin.o crtend.o"
1019         use_fixproto=yes
1020         ;;
1021 i[34567]86-*-aout*)
1022         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
1023         use_fixproto=yes
1024         ;;
1025 i[34567]86-*-beoself* | i[34567]86-*-beos*)
1026         tmake_file='i386/t-beos i386/t-crtpic'
1027         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/beos-elf.h"
1028         extra_parts='crtbegin.o crtend.o'
1029         ;;
1030 i[34567]86-*-freebsd*)
1031         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/freebsd.h"
1032         ;;
1033 x86_64-*-freebsd*)
1034         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ${fbsd_tm_file} i386/x86-64.h i386/freebsd.h i386/freebsd64.h"
1035         ;;
1036 i[34567]86-*-netbsdelf*)
1037         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/netbsd-elf.h"
1038         ;;
1039 i[34567]86-*-netbsd*)
1040         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h netbsd.h netbsd-aout.h i386/netbsd.h"
1041         tmake_file=t-netbsd
1042         extra_parts=""
1043         use_collect2=yes
1044         ;;
1045 x86_64-*-netbsd*)
1046         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h netbsd.h netbsd-elf.h i386/x86-64.h i386/netbsd64.h"
1047         ;;
1048 i[34567]86-*-openbsd2.*|i[34567]86-*openbsd3.[0123])
1049         tm_file="i386/i386.h i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h openbsd-oldgas.h openbsd.h i386/openbsd.h"
1050         # needed to unconfuse gdb
1051         tmake_file="t-libc-ok t-openbsd i386/t-openbsd"
1052         # we need collect2 until our bug is fixed...
1053         use_collect2=yes
1054         ;;
1055 i[34567]86-*-openbsd*)
1056         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h"
1057         tm_file="${tm_file} openbsd.h i386/openbsdelf.h"
1058         gas=yes
1059         gnu_ld=yes
1060         ;;
1061 i[34567]86-*-coff*)
1062         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/i386-coff.h"
1063         use_fixproto=yes
1064         ;;
1065 i[34567]86-*-linux* | i[34567]86-*-kfreebsd*-gnu | i[34567]86-*-knetbsd*-gnu)
1066                         # Intel 80386's running GNU/*
1067                         # with ELF format using glibc 2
1068         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h i386/linux.h"
1069         case ${target} in
1070         i[34567]86-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h i386/knetbsd-gnu.h" ;;
1071         i[34567]86-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h i386/kfreebsd-gnu.h" ;;
1072         esac
1073         tmake_file="${tmake_file} i386/t-crtstuff i386/t-crtfm t-dfprules"
1074         ;;
1075 x86_64-*-linux* | x86_64-*-kfreebsd*-gnu | x86_64-*-knetbsd*-gnu)
1076         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h linux.h \
1077                  i386/x86-64.h i386/linux64.h"
1078         case ${target} in
1079         x86_64-*-kfreebsd*-gnu) tm_file="${tm_file} kfreebsd-gnu.h" ;;
1080         x86_64-*-knetbsd*-gnu) tm_file="${tm_file} knetbsd-gnu.h" ;;
1081         esac
1082         tmake_file="${tmake_file} i386/t-linux64 i386/t-crtfm t-dfprules"
1083         ;;
1084 i[34567]86-*-gnu*)
1085         ;;
1086 i[34567]86-pc-msdosdjgpp*)
1087         xm_file=i386/xm-djgpp.h
1088         tm_file="dbxcoff.h ${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/djgpp.h"
1089         tmake_file=i386/t-djgpp
1090         extra_options="${extra_options} i386/djgpp.opt"
1091         gnu_ld=yes
1092         gas=yes
1093         ;;
1094 i[34567]86-*-lynxos*)
1095         xm_defines=POSIX
1096         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/lynx.h lynx.h"
1097         tmake_file="i386/t-crtstuff t-lynx"
1098         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1099         extra_options="${extra_options} lynx.opt"
1100         thread_file=lynx
1101         gnu_ld=yes
1102         gas=yes
1103         ;;
1104 i[3456x]86-*-netware*)
1105         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h tm-dwarf2.h i386/netware.h"
1106         tmake_file=i386/t-netware
1107         extra_objs=netware.o
1108         case /${with_ld} in
1109         */nwld)
1110                 extra_objs="$extra_objs nwld.o"
1111                 tm_file="${tm_file} i386/nwld.h"
1112                 tmake_file="${tmake_file} i386/t-nwld"
1113                 extra_parts="crt0.o libgcc.def libc.def libcpre.def posixpre.def"
1114                 ;;
1115         esac
1116         case x${enable_threads} in
1117         x | xyes | xposix) thread_file='posix';;
1118         xnks) thread_file='nks';;
1119         xno) ;;
1120         *) echo 'Unknown thread configuration for NetWare' >&2; exit 1;;
1121         esac
1122         ;;
1123 i[34567]86-*-nto-qnx*)
1124         tm_file="${tm_file} i386/att.h dbxelf.h tm-dwarf2.h elfos.h svr4.h i386/unix.h i386/nto.h"
1125         tmake_file=i386/t-nto
1126         gnu_ld=yes
1127         gas=yes
1128         ;;
1129 i[34567]86-*-rtems*)
1130         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h i386/rtemself.h rtems.h"
1131         extra_parts="crtbegin.o crtend.o crti.o crtn.o"
1132         tmake_file="i386/t-rtems-i386 i386/t-crtstuff t-rtems"
1133         ;;
1134 i[34567]86-*-sco3.2v5*) # 80386 running SCO Open Server 5
1135         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
1136         if test x$gas = xyes
1137         then
1138                 tm_file="usegas.h ${tm_file}"
1139         fi
1140         tmake_file=i386/t-sco5
1141         extra_parts="crtbegin.o crtend.o"
1142         extra_options="${extra_options} i386/sco5.opt"
1143         use_fixproto=yes
1144         ;;
1145 i[34567]86-*-solaris2*)
1146         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h sol2.h"
1147         case ${target} in
1148         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1149                 tm_file="${tm_file} sol2-6.h"
1150                 ;;
1151         *-*-solaris2.1[0-9]*)
1152                 tm_file="${tm_file} sol2-10.h"
1153                 ;;
1154         esac
1155         tm_file="${tm_file} i386/sol2.h"
1156         tmake_file="t-sol2 i386/t-sol2 t-svr4"
1157         c_target_objs="sol2-c.o"
1158         cxx_target_objs="sol2-c.o"
1159         extra_objs="sol2.o"
1160         tm_p_file="${tm_p_file} sol2-protos.h"
1161         if test x$gnu_ld = xyes; then
1162                 tmake_file="$tmake_file t-slibgcc-elf-ver"
1163                 tm_defines="${tm_defines} TARGET_GNU_LD=1"
1164         else
1165                 tmake_file="$tmake_file t-slibgcc-sld"
1166         fi
1167         case ${target} in
1168         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
1169                 tm_file="$tm_file tm-dwarf2.h"
1170                 ;;
1171         esac
1172         case ${target} in
1173         *-*-solaris2.1[0-9]*)
1174                 tm_file="${tm_file} i386/x86-64.h i386/sol2-10.h"
1175                 tm_defines="${tm_defines} TARGET_BI_ARCH=1"
1176                 tmake_file="$tmake_file i386/t-sol2-10"
1177                 need_64bit_hwint=yes
1178                 # Solaris 2.10 provides crt1.o, crti.o, crtn.o, and gcrt1.o as
1179                 # part of the base system.
1180                 extra_parts="gmon.o crtbegin.o crtend.o"
1181                 ;;
1182         *)
1183                 extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
1184                 ;;
1185         esac
1186         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
1187           "":yes:* | yes:yes:* )
1188                 case ${target} in
1189                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
1190                         thread_file=posix95
1191                         ;;
1192                   *)
1193                         thread_file=posix
1194                         ;;
1195                 esac
1196                 ;;
1197           "":*:yes | yes:*:yes )
1198                 thread_file=solaris
1199                 ;;
1200         esac
1201         ;;
1202 i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
1203        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h"
1204        if test x$stabs = xyes
1205        then
1206                tm_file="${tm_file} dbx.h"
1207        fi
1208        tmake_file="i386/t-crtpic t-svr4"
1209        extra_parts="crtbegin.o crtend.o"
1210        if test x$enable_threads = xyes; then
1211                thread_file='posix'
1212        fi
1213         use_fixproto=yes
1214        ;;
1215 i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
1216         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv4-cpp.h"
1217         if test x$stabs = xyes
1218         then
1219                 tm_file="${tm_file} dbx.h"
1220         fi
1221         tmake_file="i386/t-crtpic t-svr4"
1222         extra_parts="crtbegin.o crtend.o"
1223         use_fixproto=yes
1224         ;;
1225 i[4567]86-wrs-vxworks|i[4567]86-wrs-vxworksae)
1226         tm_file="${tm_file} i386/sysv4.h i386/unix.h i386/att.h vx-common.h"
1227         case ${target} in
1228           *-vxworksae*)
1229             tm_file="${tm_file} vxworksae.h i386/vxworksae.h"
1230             tmake_file="${tmake_file} i386/t-vxworks i386/t-vxworksae"
1231             ;;
1232           *)
1233             tm_file="${tm_file} vxworks.h i386/vxworks.h"
1234             tmake_file="${tmake_file} i386/t-vxworks"
1235             ;;
1236         esac
1237         ;;
1238 i[34567]86-*-pe | i[34567]86-*-cygwin*)
1239         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/cygwin.h"
1240         xm_file=i386/xm-cygwin.h
1241         tmake_file="i386/t-cygwin i386/t-cygming"
1242         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1243         extra_options="${extra_options} i386/cygming.opt"
1244         extra_objs="winnt.o winnt-stubs.o"
1245         c_target_objs=cygwin2.o
1246         cxx_target_objs="cygwin2.o winnt-cxx.o"
1247         extra_gcc_objs=cygwin1.o
1248         if test x$enable_threads = xyes; then
1249                 thread_file='posix'
1250         fi
1251         ;;
1252 i[34567]86-*-mingw32*)
1253         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygming.h i386/mingw32.h"
1254         xm_file=i386/xm-mingw32.h
1255         tmake_file="i386/t-cygming i386/t-mingw32"
1256         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1257         extra_options="${extra_options} i386/cygming.opt"
1258         extra_objs="winnt.o winnt-stubs.o"
1259         cxx_target_objs=winnt-cxx.o
1260         case ${enable_threads} in
1261           "" | yes | win32) thread_file='win32' ;;
1262         esac
1263         case ${target} in
1264                 *mingw32crt*)
1265                         tm_file="${tm_file} i386/crtdll.h"
1266                         ;;
1267                 *mingw32msv* | *mingw32*)
1268                         ;;
1269         esac
1270         ;;
1271 i[34567]86-*-uwin*)
1272         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h dbxcoff.h i386/cygwin.h i386/uwin.h"
1273         tmake_file="i386/t-cygwin i386/t-uwin"
1274         extra_objs=winnt.o
1275         extra_options="${extra_options} i386/cygming.opt"
1276         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1277         if test x$enable_threads = xyes; then
1278                 thread_file='win32'
1279         fi
1280         use_fixproto=yes
1281         ;;
1282 i[34567]86-*-interix3*)
1283         tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/i386-interix.h i386/i386-interix3.h interix.h interix3.h"
1284         tmake_file="i386/t-interix"
1285         extra_objs=winnt.o
1286         target_gtfiles="\$(srcdir)/config/i386/winnt.c"
1287         if test x$enable_threads = xyes ; then
1288                 thread_file='posix'
1289         fi
1290         if test x$stabs = xyes ; then
1291                 tm_file="${tm_file} dbxcoff.h"
1292         fi
1293         ;;
1294 i[34567]86-*-kaos*)
1295         tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/i386elf.h kaos.h i386/kaos-i386.h"
1296         tmake_file="i386/t-i386elf t-svr4"
1297         ;;
1298 ia64*-*-elf*)
1299         tm_file="${tm_file} dbxelf.h elfos.h ia64/sysv4.h ia64/elf.h"
1300         tmake_file="ia64/t-ia64"
1301         target_cpu_default="0"
1302         if test x$gas = xyes
1303         then
1304                 target_cpu_default="${target_cpu_default}|MASK_GNU_AS"
1305         fi
1306         if test x$gnu_ld = xyes
1307         then
1308                 target_cpu_default="${target_cpu_default}|MASK_GNU_LD"
1309         fi
1310         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1311         use_fixproto=yes
1312         ;;
1313 ia64*-*-freebsd*)
1314         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} ia64/sysv4.h ia64/freebsd.h"
1315         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1316         tmake_file="${tmake_file} ia64/t-ia64"
1317         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1318         ;;
1319 ia64*-*-linux*)
1320         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h ia64/sysv4.h ia64/linux.h"
1321         tmake_file="${tmake_file} ia64/t-ia64 t-libunwind ia64/t-glibc"
1322         if test x$with_system_libunwind != xyes ; then
1323                 tmake_file="${tmake_file} t-libunwind-elf ia64/t-glibc-libunwind"
1324         fi
1325         target_cpu_default="MASK_GNU_AS|MASK_GNU_LD"
1326         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtfastmath.o"
1327         ;;
1328 ia64*-*-hpux*)
1329         tm_file="${tm_file} dbxelf.h elfos.h svr4.h ia64/sysv4.h ia64/hpux.h"
1330         tmake_file="ia64/t-ia64 ia64/t-hpux"
1331         target_cpu_default="MASK_GNU_AS"
1332         case x$enable_threads in
1333         xyes | xposix )
1334                 thread_file=posix
1335                 ;;
1336         esac
1337         use_collect2=no
1338         c_target_objs="ia64-c.o"
1339         cxx_target_objs="ia64-c.o"
1340         extra_options="${extra_options} ia64/ilp32.opt"
1341         # If we decide to run fixproto we should define FIXPROTO_DEFINES
1342         # in ia64/t-hpux, and also fix the definition of putenv in
1343         # sys-protos.h (const char not char).
1344         ;;
1345 iq2000*-*-elf*)
1346         tm_file="svr4.h elfos.h iq2000/iq2000.h"
1347         tmake_file=iq2000/t-iq2000
1348         out_file=iq2000/iq2000.c
1349         md_file=iq2000/iq2000.md
1350         use_fixproto=yes
1351         ;;
1352 m32r-*-elf*)
1353         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1354         extra_parts="crtinit.o crtfini.o"
1355         use_fixproto=yes
1356         ;;
1357 m32rle-*-elf*)
1358         tm_file="dbxelf.h elfos.h svr4.h m32r/little.h ${tm_file}"
1359         extra_parts="crtinit.o crtfini.o m32rx/crtinit.o m32rx/crtfini.o"
1360         use_fixproto=yes
1361         ;;
1362 m32r-*-linux*)
1363         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} m32r/linux.h"
1364         # We override the tmake_file for linux -- why?
1365         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1366         gnu_ld=yes
1367         use_fixproto=yes
1368         if test x$enable_threads = xyes; then
1369                 thread_file='posix'
1370         fi
1371         ;;
1372 m32rle-*-linux*)
1373         tm_file="dbxelf.h elfos.h svr4.h linux.h m32r/little.h ${tm_file} m32r/linux.h"
1374         # We override the tmake_file for linux -- why?
1375         tmake_file="t-slibgcc-elf-ver m32r/t-linux"
1376         gnu_ld=yes
1377         use_fixproto=yes
1378         if test x$enable_threads = xyes; then
1379                 thread_file='posix'
1380         fi
1381         ;;
1382 # m68hc11 and m68hc12 share the same machine description.
1383 m68hc11-*-*|m6811-*-*)
1384         tm_file="dbxelf.h elfos.h m68hc11/m68hc11.h"
1385         tm_p_file="m68hc11/m68hc11-protos.h"
1386         md_file="m68hc11/m68hc11.md"
1387         out_file="m68hc11/m68hc11.c"
1388         tmake_file="m68hc11/t-m68hc11-gas"
1389         use_fixproto=yes
1390         ;;
1391 m68hc12-*-*|m6812-*-*)
1392         tm_file="m68hc11/m68hc12.h dbxelf.h elfos.h m68hc11/m68hc11.h"
1393         tm_p_file="m68hc11/m68hc11-protos.h"
1394         md_file="m68hc11/m68hc11.md"
1395         out_file="m68hc11/m68hc11.c"
1396         tmake_file="m68hc11/t-m68hc11-gas"
1397         extra_options="${extra_options} m68hc11/m68hc11.opt"
1398         use_fixproto=yes
1399         ;;
1400 m68k-*-aout*)
1401         tmake_file=m68k/t-m68kbare
1402         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h m68k/m68k-aout.h libgloss.h"
1403         ;;
1404 m68k-*-coff*)
1405         tmake_file=m68k/t-m68kbare
1406         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1407         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kemb.h dbxcoff.h m68k/coff.h dbx.h"
1408         use_fixproto=yes
1409         ;;
1410 m68020-*-elf* | m68k-*-elf*)
1411         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h"
1412         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1413         tmake_file=m68k/t-m68kelf
1414         extra_parts="crtbegin.o crtend.o"
1415         ;;
1416 m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
1417         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
1418         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1419         case ${target} in
1420         m68010*)
1421                 target_cpu_default="0"
1422                 ;;
1423         *)
1424                 target_cpu_default="MASK_68020|MASK_68881|MASK_BITFIELD"
1425                 ;;
1426         esac
1427         ;;
1428 m68k*-*-openbsd*)
1429         # needed to unconfuse gdb
1430         tm_defines="${tm_defines} OBSD_OLD_GAS TARGET_DEFAULT=(MASK_68020|MASK_68881|MASK_BITFIELD)"
1431         tm_file="m68k/m68k.h openbsd.h m68k/openbsd.h"
1432         tmake_file="t-libc-ok t-openbsd m68k/t-openbsd"
1433         # we need collect2 until our bug is fixed...
1434         use_collect2=yes
1435         ;;
1436 m68k-*-uclinux*)                # Motorola m68k/ColdFire running uClinux with uClibc
1437         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/uclinux.h"
1438         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1439         tmake_file=m68k/t-uclinux
1440         use_fixproto=no
1441         ;;
1442 m68k-*-linux*)          # Motorola m68k's running GNU/Linux
1443                                 # with ELF format using glibc 2
1444                                 # aka the GNU/Linux C library 6.
1445         tm_file="m68k/m68k.h dbxelf.h elfos.h svr4.h linux.h m68k/linux.h"
1446         extra_options="${extra_options} m68k/ieee.opt"
1447         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1448         # if not configured with --enable-sjlj-exceptions, bump the
1449         # libgcc version number
1450         if test x$sjlj != x1; then
1451             tmake_file="$tmake_file m68k/t-slibgcc-elf-ver"
1452         fi
1453         ;;
1454 m68k-*-rtems*)
1455         tmake_file="m68k/t-m68kbare m68k/t-crtstuff t-rtems m68k/t-rtems"
1456         tm_file="m68k/m68k.h m68k/m68k-none.h m68k/m68kelf.h dbxelf.h elfos.h m68k/m68kemb.h m68k/m68020-elf.h m68k/rtemself.h rtems.h"
1457         tm_defines="${tm_defines} MOTOROLA USE_GAS"
1458         extra_parts="crtbegin.o crtend.o"
1459         ;;
1460 mcore-*-elf)
1461         tm_file="dbxelf.h elfos.h svr4.h ${tm_file} mcore/mcore-elf.h"
1462         tmake_file=mcore/t-mcore
1463         use_fixproto=yes
1464         ;;
1465 mcore-*-pe*)
1466         tm_file="svr3.h dbxcoff.h ${tm_file} mcore/mcore-pe.h"
1467         tmake_file=mcore/t-mcore-pe
1468         use_fixproto=yes
1469         ;;
1470 mips-sgi-irix[56]*)
1471         tm_file="elfos.h ${tm_file} mips/iris.h"
1472         tmake_file="mips/t-iris mips/t-slibgcc-irix"
1473         target_cpu_default="MASK_ABICALLS"
1474         case ${target} in
1475         *-*-irix5*)
1476                 tm_file="${tm_file} mips/iris5.h"
1477                 ;;
1478
1479         *-*-irix6*)
1480                 tm_file="${tm_file} mips/iris6.h"
1481                 tmake_file="${tmake_file} mips/t-iris6"
1482                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_N32"
1483                 ;;
1484         esac
1485         if test "x$stabs" = xyes
1486         then
1487                 tm_file="${tm_file} dbx.h mips/dbxmdebug.h"
1488         fi
1489         if test "x$gnu_ld" = xyes
1490         then
1491                 tm_defines="${tm_defines} IRIX_USING_GNU_LD"
1492         fi
1493 #       if test x$enable_threads = xyes; then
1494 #               thread_file='irix'
1495 #       fi
1496         use_fixproto=yes
1497         ;;
1498 mips*-*-netbsd*)                        # NetBSD/mips, either endian.
1499         target_cpu_default="MASK_ABICALLS"
1500         tm_file="elfos.h ${tm_file} mips/elf.h netbsd.h netbsd-elf.h mips/netbsd.h"
1501         ;;
1502 mips64*-*-linux*)
1503         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h mips/linux64.h"
1504         tmake_file="${tmake_file} mips/t-linux64"
1505         tm_defines="${tm_defines} MIPS_ABI_DEFAULT=ABI_N32"
1506         gnu_ld=yes
1507         gas=yes
1508         ;;
1509 mips*-*-linux*)                         # Linux MIPS, either endian.
1510         tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
1511         case ${target} in
1512         mipsisa32*-*)
1513                 target_cpu_default="MASK_SOFT_FLOAT"
1514                 tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32"
1515                 ;;
1516         esac
1517         ;;
1518 mips*-*-openbsd*)
1519         tm_defines="${tm_defines} OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
1520         target_cpu_default="MASK_ABICALLS"
1521         tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
1522         case ${target} in
1523         mips*el-*-openbsd*)
1524             tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
1525         *)  tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
1526         esac
1527         ;;
1528 mipsisa32-*-elf* | mipsisa32el-*-elf*)
1529         tm_file="elfos.h ${tm_file} mips/elf.h"
1530         tmake_file=mips/t-isa3264
1531         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=32 MIPS_ABI_DEFAULT=ABI_EABI"
1532         use_fixproto=yes
1533         ;;
1534 mipsisa32r2-*-elf* | mipsisa32r2el-*-elf*)
1535         tm_file="elfos.h ${tm_file} mips/elf.h"
1536         tmake_file=mips/t-isa3264
1537         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=33 MIPS_ABI_DEFAULT=ABI_EABI"
1538         use_fixproto=yes
1539         ;;
1540 mipsisa64-*-elf* | mipsisa64el-*-elf*)
1541         tm_file="elfos.h ${tm_file} mips/elf.h"
1542         tmake_file=mips/t-isa3264
1543         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1544         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_ABI_DEFAULT=ABI_EABI"
1545         use_fixproto=yes
1546         ;;
1547 mipsisa64sr71k-*-elf*)
1548         tm_file="elfos.h ${tm_file} mips/elf.h"
1549         tmake_file=mips/t-sr71k
1550         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1551         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sr71000\\\" MIPS_ABI_DEFAULT=ABI_EABI"
1552         use_fixproto=yes
1553         ;;
1554 mipsisa64sb1-*-elf* | mipsisa64sb1el-*-elf*)
1555         tm_file="elfos.h ${tm_file} mips/elf.h"
1556         tmake_file=mips/t-elf
1557         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1558         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=64 MIPS_CPU_STRING_DEFAULT=\\\"sb1\\\" MIPS_ABI_DEFAULT=ABI_O64"
1559         use_fixproto=yes
1560         ;;
1561 mips-*-elf* | mipsel-*-elf*)
1562         tm_file="elfos.h ${tm_file} mips/elf.h"
1563         tmake_file=mips/t-elf
1564         use_fixproto=yes
1565         ;;
1566 mips64-*-elf* | mips64el-*-elf*)
1567         tm_file="elfos.h ${tm_file} mips/elf.h"
1568         tmake_file=mips/t-elf
1569         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1570         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1571         use_fixproto=yes
1572         ;;
1573 mips64vr-*-elf* | mips64vrel-*-elf*)
1574         tm_file="mips/vr.h elfos.h ${tm_file} mips/elf.h"
1575         tmake_file=mips/t-vr
1576         use_fixproto=yes
1577         ;;
1578 mips64orion-*-elf* | mips64orionel-*-elf*)
1579         tm_file="elfos.h ${tm_file} mips/elforion.h mips/elf.h"
1580         tmake_file=mips/t-elf
1581         target_cpu_default="MASK_64BIT|MASK_FLOAT64"
1582         tm_defines="${tm_defines} MIPS_ISA_DEFAULT=3 MIPS_ABI_DEFAULT=ABI_O64"
1583         use_fixproto=yes
1584         ;;
1585 mips*-*-rtems*)
1586         tm_file="elfos.h ${tm_file} mips/elf.h mips/rtems.h rtems.h"
1587         tmake_file="mips/t-elf t-rtems mips/t-rtems"
1588         ;;
1589 mips-wrs-vxworks)
1590         # We want vxworks.h after mips/elf.h, which unfortunately means we
1591         # have to redo the tm_file list from scratch.
1592         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h vxworks.h mips/vxworks.h"
1593         tmake_file="${tmake_file} mips/t-vxworks"
1594         ;;
1595 mips-wrs-windiss)       # Instruction-level simulator for VxWorks.
1596         xm_defines=POSIX
1597         tm_file="elfos.h mips/mips.h svr4.h mips/elf.h windiss.h mips/windiss.h"
1598         tmake_file="${tmake_file} mips/t-elf"
1599         thread_file=
1600         ;;
1601 mipstx39-*-elf* | mipstx39el-*-elf*)
1602         tm_file="elfos.h ${tm_file} mips/r3900.h mips/elf.h"
1603         tmake_file=mips/t-r3900
1604         use_fixproto=yes
1605         ;;
1606 mmix-knuth-mmixware)
1607         need_64bit_hwint=yes
1608         ;;
1609 mn10300-*-*)
1610         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1611         if test x$stabs = xyes
1612         then
1613                 tm_file="${tm_file} dbx.h"
1614         fi
1615         use_collect2=no
1616         use_fixproto=yes
1617         ;;
1618 mt-*-elf)
1619         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
1620         tmake_file="${tmake_file} mt/t-mt"
1621         ;;
1622 ns32k-*-netbsdelf*)
1623         echo "GCC does not yet support the ${target} target"; exit 1
1624         ;;
1625 ns32k-*-netbsd*)
1626         tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
1627         # On NetBSD, the headers are already okay, except for math.h.
1628         tmake_file="t-netbsd ns32k/t-ns32k"
1629         extra_parts=""
1630         use_collect2=yes
1631         ;;
1632 pdp11-*-bsd)
1633         tm_file="${tm_file} pdp11/2bsd.h"
1634         use_fixproto=yes
1635         ;;
1636 pdp11-*-*)
1637         use_fixproto=yes
1638         ;;
1639 # port not yet contributed
1640 #powerpc-*-openbsd*)
1641 #       tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit "
1642 #       extra_headers=
1643 #       ;;
1644 powerpc64-*-linux*)
1645         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1646         test x$with_cpu != x || cpu_is_64bit=yes
1647         test x$cpu_is_64bit != xyes || tm_file="${tm_file} rs6000/default64.h"
1648         tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1649         if test x${enable_secureplt} = xyes; then
1650                 tm_file="rs6000/secureplt.h ${tm_file}"
1651         fi
1652         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1653         tmake_file="t-dfprules rs6000/t-fprules ${tmake_file} rs6000/t-ppccomm rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1654         ;;
1655 powerpc64-*-gnu*)
1656         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux64.h rs6000/gnu.h"
1657         extra_options="${extra_options} rs6000/sysv4.opt rs6000/linux64.opt"
1658         tmake_file="rs6000/t-fprules t-slibgcc-elf-ver t-gnu rs6000/t-linux64 rs6000/t-fprules-softfp soft-fp/t-softfp"
1659         ;;
1660 powerpc-*-beos*)
1661         tm_file="${tm_file} rs6000/aix.h rs6000/beos.h rs6000/xcoff.h"
1662         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-beos"
1663         extra_headers=
1664         use_fixproto=yes
1665         ;;
1666 powerpc-*-darwin*)
1667         extra_options="${extra_options} rs6000/darwin.opt"
1668         extra_parts="crt2.o"
1669         case ${target} in
1670           *-darwin1[0-9]* | *-darwin[8-9]*)
1671             tmake_file="${tmake_file} rs6000/t-darwin8"
1672             tm_file="${tm_file} rs6000/darwin8.h"
1673             ;;
1674           *-darwin7*)
1675             tm_file="${tm_file} rs6000/darwin7.h"
1676             ;;
1677           *-darwin[0-6]*)
1678             ;;
1679         esac
1680         extra_headers=altivec.h
1681         ;;
1682 powerpc*-*-freebsd*)
1683         tm_file="${tm_file} dbxelf.h elfos.h ${fbsd_tm_file} rs6000/sysv4.h rs6000/freebsd.h"
1684         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1685         extra_options="${extra_options} rs6000/sysv4.opt"
1686         ;;
1687 powerpc-*-netbsd*)
1688         tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h freebsd-spec.h rs6000/sysv4.h rs6000/netbsd.h"
1689         tmake_file="${tmake_file} rs6000/t-netbsd"
1690         extra_options="${extra_options} rs6000/sysv4.opt"
1691         ;;
1692 powerpc-*-chorusos*)
1693         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h chorus.h"
1694         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1695         extra_options="${extra_options} rs6000/sysv4.opt"
1696         case ${enable_threads} in
1697           yes | posix)
1698             thread_file='posix'
1699             ;;
1700         esac
1701         use_fixproto=yes
1702         ;;
1703 powerpc-*-eabispe*)
1704         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabispe.h"
1705         extra_options="${extra_options} rs6000/sysv4.opt"
1706         tmake_file="rs6000/t-spe rs6000/t-ppccomm"
1707         ;;
1708 powerpc-*-eabisimaltivec*)
1709         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h rs6000/eabialtivec.h"
1710         extra_options="${extra_options} rs6000/sysv4.opt"
1711         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1712         ;;
1713 powerpc-*-eabisim*)
1714         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabisim.h"
1715         extra_options="${extra_options} rs6000/sysv4.opt"
1716         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1717         ;;
1718 powerpc-*-elf*)
1719         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1720         extra_options="${extra_options} rs6000/sysv4.opt"
1721         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1722         use_fixproto=yes
1723         ;;
1724 powerpc-*-eabialtivec*)
1725         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/eabialtivec.h"
1726         extra_options="${extra_options} rs6000/sysv4.opt"
1727         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcendian rs6000/t-ppccomm"
1728         ;;
1729 powerpc-*-eabi*)
1730         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h"
1731         extra_options="${extra_options} rs6000/sysv4.opt"
1732         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1733         ;;
1734 powerpc-*-rtems*)
1735         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/eabi.h rs6000/rtems.h rtems.h"
1736         extra_options="${extra_options} rs6000/sysv4.opt"
1737         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-rtems t-rtems rs6000/t-ppccomm"
1738         ;;
1739 powerpc-*-linux*altivec*)
1740         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h"
1741         extra_options="${extra_options} rs6000/sysv4.opt"
1742         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1743         ;;
1744 powerpc-*-linux*spe*)
1745         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxspe.h"
1746         extra_options="${extra_options} rs6000/sysv4.opt"
1747         tmake_file="rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1748         ;;
1749 powerpc-*-linux*)
1750         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1751         extra_options="${extra_options} rs6000/sysv4.opt"
1752         tmake_file="t-dfprules rs6000/t-fprules rs6000/t-fprules-softfp soft-fp/t-softfp rs6000/t-ppcos ${tmake_file} rs6000/t-ppccomm"
1753         case ${enable_targets}:${cpu_is_64bit} in
1754             *powerpc64* | all:* | *:yes)
1755                 if test x$cpu_is_64bit = xyes; then
1756                     tm_file="${tm_file} rs6000/default64.h"
1757                 fi
1758                 tm_file="rs6000/biarch64.h ${tm_file} rs6000/linux64.h"
1759                 tmake_file="$tmake_file rs6000/t-linux64"
1760                 extra_options="${extra_options} rs6000/linux64.opt"
1761                 ;;
1762             *)
1763                 tm_file="${tm_file} rs6000/linux.h"
1764                 ;;
1765         esac
1766         if test x${enable_secureplt} = xyes; then
1767                 tm_file="rs6000/secureplt.h ${tm_file}"
1768         fi
1769         ;;
1770 powerpc-*-gnu-gnualtivec*)
1771         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/linuxaltivec.h rs6000/gnu.h"
1772         extra_options="${extra_options} rs6000/sysv4.opt"
1773         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1774         if test x$enable_threads = xyes; then
1775                 thread_file='posix'
1776         fi
1777         ;;
1778 powerpc-*-gnu*)
1779         tm_file="${cpu_type}/${cpu_type}.h elfos.h svr4.h freebsd-spec.h gnu.h rs6000/sysv4.h rs6000/linux.h rs6000/gnu.h"
1780         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos t-slibgcc-elf-ver t-gnu rs6000/t-ppccomm"
1781         extra_options="${extra_options} rs6000/sysv4.opt"
1782         if test x$enable_threads = xyes; then
1783                 thread_file='posix'
1784         fi
1785         ;;
1786 powerpc-wrs-vxworks|powerpc-wrs-vxworksae)
1787         # We want vxworks.h after rs6000/sysv4.h, which unfortunately
1788         # means we have to redo the tm_file list from scratch.
1789         tm_file="rs6000/rs6000.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h"
1790         tmake_file="${tmake_file} rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppccomm rs6000/t-vxworks"
1791         extra_options="${extra_options} rs6000/sysv4.opt"
1792         extra_headers=ppc-asm.h
1793         case ${target} in
1794           *-vxworksae*)
1795             tm_file="${tm_file} vx-common.h vxworksae.h rs6000/vxworks.h rs6000/vxworksae.h"
1796             tmake_file="${tmake_file} rs6000/t-vxworksae"
1797             ;;
1798           *-vxworks*)
1799             tm_file="${tm_file} vx-common.h vxworks.h rs6000/vxworks.h"
1800             ;;
1801         esac
1802         ;;
1803 powerpc-wrs-windiss*)  # Instruction-level simulator for VxWorks.
1804         tm_file="${tm_file} elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/windiss.h"
1805         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1806         extra_options="${extra_options} rs6000/sysv4.opt"
1807         thread_file=""
1808         use_fixproto=yes
1809         ;;
1810 powerpc-*-lynxos*)
1811         xm_defines=POSIX
1812         tm_file="${tm_file} dbxelf.h elfos.h rs6000/sysv4.h rs6000/lynx.h lynx.h"
1813         tmake_file="t-lynx rs6000/t-lynx"
1814         extra_options="${extra_options} rs6000/sysv4.opt lynx.opt"
1815         extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
1816         extra_options="${extra_options} lynx.opt"
1817         thread_file=lynx
1818         gnu_ld=yes
1819         gas=yes
1820         ;;
1821 powerpcle-*-sysv*)
1822         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1823         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcos rs6000/t-ppccomm"
1824         extra_options="${extra_options} rs6000/sysv4.opt"
1825         use_fixproto=yes
1826         ;;
1827 powerpcle-*-elf*)
1828         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h"
1829         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1830         extra_options="${extra_options} rs6000/sysv4.opt"
1831         use_fixproto=yes
1832         ;;
1833 powerpcle-*-eabisim*)
1834         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h rs6000/eabisim.h"
1835         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1836         extra_options="${extra_options} rs6000/sysv4.opt"
1837         ;;
1838 powerpcle-*-eabi*)
1839         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h rs6000/eabi.h"
1840         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1841         extra_options="${extra_options} rs6000/sysv4.opt"
1842         ;;
1843 powerpc-*-kaos*)
1844         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h kaos.h rs6000/kaos-ppc.h"
1845         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1846         extra_options="${extra_options} rs6000/sysv4.opt"
1847         ;;
1848 powerpcle-*-kaos*)
1849         tm_file="${tm_file} dbxelf.h elfos.h svr4.h freebsd-spec.h rs6000/sysv4.h rs6000/sysv4le.h kaos.h rs6000/kaos-ppc.h"
1850         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-ppcgas rs6000/t-ppccomm"
1851         extra_options="${extra_options} rs6000/sysv4.opt"
1852         ;;
1853 rs6000-ibm-aix4.[12]* | powerpc-ibm-aix4.[12]*)
1854         tm_file="${tm_file} rs6000/aix.h rs6000/aix41.h rs6000/xcoff.h"
1855         tmake_file="rs6000/t-fprules rs6000/t-fprules-fpbit rs6000/t-newas"
1856         extra_options="${extra_options} rs6000/aix41.opt"
1857         use_collect2=yes
1858         extra_headers=
1859         use_fixproto=yes
1860         ;;
1861 rs6000-ibm-aix4.[3456789]* | powerpc-ibm-aix4.[3456789]*)
1862         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix43.h rs6000/xcoff.h"
1863         tmake_file=rs6000/t-aix43
1864         extra_options="${extra_options} rs6000/aix64.opt"
1865         use_collect2=yes
1866         thread_file='aix'
1867         extra_headers=
1868         ;;
1869 rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
1870         tm_file="rs6000/biarch64.h ${tm_file} rs6000/aix.h rs6000/aix51.h rs6000/xcoff.h"
1871         extra_options="${extra_options} rs6000/aix64.opt"
1872         tmake_file=rs6000/t-aix43
1873         use_collect2=yes
1874         thread_file='aix'
1875         extra_headers=
1876         ;;
1877 rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
1878         tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
1879         tmake_file=rs6000/t-aix52
1880         extra_options="${extra_options} rs6000/aix64.opt"
1881         use_collect2=yes
1882         thread_file='aix'
1883         extra_headers=
1884         ;;
1885 s390-*-linux*)
1886         tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1887         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
1888         ;;
1889 s390x-*-linux*)
1890         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
1891         tm_p_file=s390/s390-protos.h
1892         md_file=s390/s390.md
1893         extra_modes=s390/s390-modes.def
1894         out_file=s390/s390.c
1895         tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux s390/t-linux64"
1896         ;;
1897 s390x-ibm-tpf*)
1898         tm_file="s390/s390x.h s390/s390.h dbxelf.h elfos.h svr4.h s390/tpf.h"
1899         tm_p_file=s390/s390-protos.h
1900         md_file=s390/s390.md
1901         extra_modes=s390/s390-modes.def
1902         out_file=s390/s390.c
1903         extra_parts="crtbeginS.o crtendS.o"
1904         tmake_file="s390/t-crtstuff s390/t-tpf"
1905         thread_file='tpf'
1906         extra_options="${extra_options} s390/tpf.opt"
1907         ;;
1908 sh-*-elf* | sh[12346l]*-*-elf* | sh*-*-kaos* | \
1909 sh-*-symbianelf* | sh[12346l]*-*-symbianelf* | \
1910   sh-*-linux* | sh[346lbe]*-*-linux* | \
1911   sh-*-netbsdelf* | shl*-*-netbsdelf* | sh5-*-netbsd* | sh5l*-*-netbsd* | \
1912    sh64-*-netbsd* | sh64l*-*-netbsd*)
1913         tmake_file="${tmake_file} sh/t-sh sh/t-elf"
1914         if test x${with_endian} = x; then
1915                 case ${target} in
1916                 sh[1234]*be-*-* | sh[1234]*eb-*-*) with_endian=big ;;
1917                 shbe-*-* | sheb-*-*)               with_endian=big,little ;;
1918                 sh[1234]l* | sh[34]*-*-linux*)     with_endian=little ;;
1919                 shl* | sh64l* | sh*-*-linux* | \
1920                   sh5l* | sh-superh-elf)           with_endian=little,big ;;
1921                 sh[1234]*-*-*)                     with_endian=big ;;
1922                 *)                                 with_endian=big,little ;;
1923                 esac
1924         fi
1925         case ${with_endian} in
1926         big|little)     tmake_file="${tmake_file} sh/t-1e" ;;
1927         big,little|little,big) ;;
1928         *)      echo "with_endian=${with_endian} not supported."; exit 1 ;;
1929         esac
1930         case ${with_endian} in
1931         little*)        tm_file="sh/little.h ${tm_file}" ;;
1932         esac
1933         tm_file="${tm_file} dbxelf.h elfos.h"
1934         case ${target} in
1935         sh*-*-netbsd*)  ;;
1936         *)              tm_file="${tm_file} svr4.h" ;;
1937         esac
1938         tm_file="${tm_file} sh/elf.h"
1939         case ${target} in
1940         sh*-*-linux*)   tmake_file="${tmake_file} sh/t-linux"
1941                         tm_file="${tm_file} linux.h sh/linux.h" ;;
1942         sh*-*-kaos*)    tm_file="${tm_file} sh/embed-elf.h kaos.h sh/kaos-sh.h"
1943                         ;;
1944         sh*-*-netbsd*)  tm_file="${tm_file} netbsd.h netbsd-elf.h sh/netbsd-elf.h" ;;
1945         sh*-superh-elf) if test x$with_libgloss != xno; then
1946                                 with_libgloss=yes
1947                                 tm_file="${tm_file} sh/newlib.h"
1948                         fi
1949                         tm_file="${tm_file} sh/embed-elf.h"
1950                         extra_options="${extra_options} sh/superh.opt" ;;
1951         *)              if test x$with_newlib = xyes \
1952                            && test x$with_libgloss = xyes; then
1953                                 tm_file="${tm_file} sh/newlib.h"
1954                         fi
1955                         tm_file="${tm_file} sh/embed-elf.h" ;;
1956         esac
1957         case ${target} in
1958         sh5*-*-netbsd*)
1959                 # SHmedia, 32-bit ABI
1960                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd"
1961                 ;;
1962         sh64*-netbsd*)
1963                 # SHmedia, 64-bit ABI
1964                 tmake_file="${tmake_file} sh/t-sh64 sh/t-netbsd sh/t-netbsd-sh5-64"
1965                 ;;
1966         *-*-netbsd)
1967                 tmake_file="${tmake_file} sh/t-netbsd"
1968                 ;;
1969         sh64*-*-linux*)
1970                 tmake_file="${tmake_file} sh/t-sh64 sh/t-linux64"
1971                 tm_file="${tm_file} sh/sh64.h"
1972                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1973                 ;;
1974         sh64*)
1975                 tmake_file="${tmake_file} sh/t-sh64"
1976                 tm_file="${tm_file} sh/sh64.h"
1977                 extra_headers="shmedia.h ushmedia.h sshmedia.h"
1978                 ;;
1979         *-*-symbianelf*)
1980                 tmake_file="sh/t-symbian"
1981                 tm_file="sh/symbian-pre.h sh/little.h ${tm_file} sh/symbian-post.h"
1982                 extra_objs="symbian.o"
1983                 extra_parts="crt1.o crti.o crtn.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
1984                 ;;
1985         esac
1986         # sed el/eb endian suffixes away to avoid confusion with sh[23]e
1987         case `echo ${target} | sed 's/e[lb]-/-/'` in
1988         sh64*-*-netbsd*)        sh_cpu_target=sh5-64media ;;
1989         sh64* | sh5*-*-netbsd*) sh_cpu_target=sh5-32media ;;
1990         sh4a_single_only*)      sh_cpu_target=sh4a-single-only ;;
1991         sh4a_single*)           sh_cpu_target=sh4a-single ;;
1992         sh4a_nofpu*)            sh_cpu_target=sh4a-nofpu ;;
1993         sh4al)                  sh_cpu_target=sh4al ;;
1994         sh4a*)                  sh_cpu_target=sh4a ;;
1995         sh4_single_only*)       sh_cpu_target=sh4-single-only ;;
1996         sh4_single*)            sh_cpu_target=sh4-single ;;
1997         sh4_nofpu*)             sh_cpu_target=sh4-nofpu ;;
1998         sh4* | sh-superh-*)     sh_cpu_target=sh4 ;;
1999         sh3e*)                  sh_cpu_target=sh3e ;;
2000         sh*-*-netbsd* | sh3*)   sh_cpu_target=sh3 ;;
2001         sh2a_single_only*)      sh_cpu_target=sh2a-single-only ;;
2002         sh2a_single*)           sh_cpu_target=sh2a-single ;;
2003         sh2a_nofpu*)            sh_cpu_target=sh2a-nofpu ;;
2004         sh2a*)                  sh_cpu_target=sh2a ;;
2005         sh2e*)                  sh_cpu_target=sh2e ;;
2006         sh2*)                   sh_cpu_target=sh2 ;;
2007         *)                      sh_cpu_target=sh1 ;;
2008         esac
2009         # did the user say --without-fp ?
2010         if test x$with_fp = xno; then
2011                 case ${sh_cpu_target} in
2012                 sh5-*media)     sh_cpu_target=${sh_cpu_target}-nofpu ;;
2013                 sh4al | sh1)    ;;
2014                 sh4a* )         sh_cpu_target=sh4a-nofpu ;;
2015                 sh4*)           sh_cpu_target=sh4-nofpu ;;
2016                 sh3*)           sh_cpu_target=sh3 ;;
2017                 sh2a*)          sh_cpu_target=sh2a-nofpu ;;
2018                 sh2*)           sh_cpu_target=sh2 ;;
2019                 *)      echo --without-fp not available for $target: ignored
2020                 esac
2021                 tm_defines="$tm_defines STRICT_NOFPU=1"
2022         fi
2023         sh_cpu_default="`echo $with_cpu|sed s/^m/sh/|tr A-Z_ a-z-`"
2024         case $sh_cpu_default in
2025         sh5-64media-nofpu | sh5-64media | \
2026           sh5-32media-nofpu | sh5-32media | sh5-compact-nofpu | sh5-compact | \
2027           sh2a-single-only | sh2a-single | sh2a-nofpu | sh2a | \
2028           sh4a-single-only | sh4a-single | sh4a-nofpu | sh4a | sh4al | \
2029           sh4-single-only | sh4-single | sh4-nofpu | sh4 | \
2030           sh3e | sh3 | sh2e | sh2 | sh1) ;;
2031         "")     sh_cpu_default=${sh_cpu_target} ;;
2032         *)      echo "with_cpu=$with_cpu not supported"; exit 1 ;;
2033         esac
2034         sh_multilibs=${with_multilib_list}
2035         if test x${sh_multilibs} = x ; then
2036                 case ${target} in
2037                 sh64-superh-linux* | \
2038                 sh[1234]*)      sh_multilibs=${sh_cpu_target} ;;
2039                 sh64* | sh5*)   sh_multilibs=m5-32media,m5-32media-nofpu,m5-compact,m5-compact-nofpu,m5-64media,m5-64media-nofpu ;;
2040                 sh-superh-*)    sh_multilibs=m4,m4-single,m4-single-only,m4-nofpu ;;
2041                 sh*-*-linux*)   sh_multilibs=m1,m3e,m4 ;;
2042                 sh*-*-netbsd*)  sh_multilibs=m3,m3e,m4 ;;
2043                 *) sh_multilibs=m1,m2,m2e,m4,m4-single,m4-single-only,m2a,m2a-single ;;
2044                 esac
2045                 if test x$with_fp = xno; then
2046                         sh_multilibs="`echo $sh_multilibs|sed -e s/m4/sh4-nofpu/ -e s/,m4-[^,]*//g -e s/,m[23]e// -e s/m2a,m2a-single/m2a-nofpu/ -e s/m5-..m....,//g`"
2047                 fi
2048         fi
2049         target_cpu_default=SELECT_`echo ${sh_cpu_default}|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`
2050         tm_defines=${tm_defines}' SH_MULTILIB_CPU_DEFAULT=\"'`echo $sh_cpu_default|sed s/sh/m/`'\"'
2051         sh_multilibs=`echo $sh_multilibs,$sh_cpu_default | sed -e 's/[  ,/][    ,]*/ /g' -e 's/ $//' -e 's/^m/sh/' -e 's/ m/ sh/g' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz-`
2052         for sh_multilib in ${sh_multilibs}; do
2053                 case ${sh_multilib} in
2054                 sh1 | sh2 | sh2e | sh3 | sh3e | \
2055                 sh4 | sh4-single | sh4-single-only | sh4-nofpu | \
2056                 sh4a | sh4a-single | sh4a-single-only | sh4a-nofpu | sh4al | \
2057                 sh2a | sh2a-single | sh2a-single-only | sh2a-nofpu | \
2058                 sh5-64media | sh5-64media-nofpu | \
2059                 sh5-32media | sh5-32media-nofpu | \
2060                 sh5-compact | sh5-compact-nofpu)
2061                         tmake_file="${tmake_file} sh/t-mlib-${sh_multilib}"
2062                         tm_defines="$tm_defines SUPPORT_`echo $sh_multilib|tr abcdefghijklmnopqrstuvwxyz- ABCDEFGHIJKLMNOPQRSTUVWXYZ_`=1"
2063                         ;;
2064                 *)
2065                         echo "with_multilib_list=${sh_multilib} not supported."
2066                         exit 1
2067                         ;;
2068                 esac
2069         done
2070         if test x${enable_incomplete_targets} = xyes ; then
2071                 tm_defines="$tm_defines SUPPORT_SH1=1 SUPPORT_SH2E=1 SUPPORT_SH4=1 SUPPORT_SH4_SINGLE=1 SUPPORT_SH2A=1 SUPPORT_SH2A_SINGLE=1 SUPPORT_SH5_32MEDIA=1 SUPPORT_SH5_32MEDIA_NOFPU=1 SUPPORT_SH5_64MEDIA=1 SUPPORT_SH5_64MEDIA_NOFPU=1"
2072         fi
2073         use_fixproto=yes
2074         ;;
2075 sh-*-rtemscoff*)
2076         tmake_file="sh/t-sh t-rtems sh/t-rtems"
2077         tm_file="${tm_file} dbxcoff.h sh/coff.h sh/rtems.h rtems.h"
2078         ;;
2079 sh-*-rtems*)
2080         tmake_file="sh/t-sh sh/t-elf t-rtems sh/t-rtems"
2081         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h sh/rtemself.h rtems.h"
2082         ;;
2083 sh-wrs-vxworks)
2084         tmake_file="$tmake_file sh/t-sh sh/t-elf sh/t-vxworks"
2085         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/embed-elf.h sh/vxworks.h"
2086         ;;
2087 sh-*-*)
2088         tm_file="${tm_file} dbxcoff.h sh/coff.h"
2089         use_fixproto=yes
2090         ;;
2091 sparc-*-netbsdelf*)
2092         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2093         extra_options="${extra_options} sparc/long-double-switch.opt"
2094         ;;
2095 sparc64-*-openbsd*)
2096         tm_file="sparc/openbsd1-64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h openbsd.h sparc/openbsd64.h"
2097         extra_options="${extra_options} sparc/little-endian.opt"
2098         gas=yes gnu_ld=yes
2099         with_cpu=ultrasparc
2100         ;;
2101 sparc-*-elf*)
2102         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h"
2103         tmake_file="sparc/t-elf sparc/t-crtfm"
2104         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2105         use_fixproto=yes
2106         ;;
2107 sparc-*-linux*)         # SPARC's running GNU/Linux, libc6
2108         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
2109         extra_options="${extra_options} sparc/long-double-switch.opt"
2110         tmake_file="${tmake_file} sparc/t-linux sparc/t-crtfm"
2111         ;;
2112 sparc-*-rtems*)
2113         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp-elf.h sparc/rtemself.h rtems.h"
2114         tmake_file="sparc/t-elf sparc/t-crtfm t-rtems"
2115         extra_parts="crti.o crtn.o crtbegin.o crtend.o"
2116         ;;
2117 sparc64-*-solaris2* | sparcv9-*-solaris2*)
2118         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2119         case ${target} in
2120         *-*-solaris2.1[0-9]*)
2121                 tm_file="${tm_file} sol2-10.h"
2122                 ;;
2123         esac
2124         tm_file="${tm_file} sparc/sol2.h sparc/sol2-64.h sparc/sol2-bi.h"
2125         if test x$gnu_ld = xyes; then
2126                 tm_file="${tm_file} sparc/sol2-gld.h sparc/sol2-gld-bi.h"
2127         fi
2128         if test x$gas = xyes; then
2129                 tm_file="${tm_file} sparc/sol2-gas.h sparc/sol2-gas-bi.h"
2130         fi
2131         tm_file="${tm_file} tm-dwarf2.h"
2132         tmake_file="t-sol2 sparc/t-sol2 sparc/t-sol2-64 sparc/t-crtfm"
2133         if test x$gnu_ld = xyes; then
2134                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2135         else
2136                 tmake_file="$tmake_file t-slibgcc-sld"
2137         fi
2138         c_target_objs="sol2-c.o"
2139         cxx_target_objs="sol2-c.o"
2140         extra_objs="sol2.o"
2141         tm_p_file="${tm_p_file} sol2-protos.h"
2142         extra_parts="crt1.o crti.o crtn.o gcrt1.o crtbegin.o crtend.o"
2143         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2144           "":yes:* | yes:yes:* ) thread_file=posix ;;
2145           "":*:yes | yes:*:yes ) thread_file=solaris ;;
2146         esac
2147         need_64bit_hwint=yes
2148         ;;
2149 sparc-*-solaris2*)
2150         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sol2.h"
2151         case ${target} in
2152         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2153                 tm_file="${tm_file} sol2-6.h"
2154                 ;;
2155         *-*-solaris2.1[0-9]*)
2156                 tm_file="${tm_file} sol2-10.h"
2157                 ;;
2158         esac
2159         tm_file="${tm_file} sparc/sol2.h"
2160         if test x$gnu_ld = xyes; then
2161                 tm_file="${tm_file} sparc/sol2-gld.h"
2162         fi
2163         if test x$gas = xyes; then
2164                 tm_file="${tm_file} sparc/sol2-gas.h"
2165         fi
2166         tmake_file="t-sol2 sparc/t-sol2 sparc/t-crtfm"
2167         if test x$gnu_ld = xyes; then
2168                 tmake_file="$tmake_file t-slibgcc-elf-ver"
2169         else
2170                 tmake_file="$tmake_file t-slibgcc-sld"
2171         fi
2172         case ${target} in
2173         *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2174                 if test x$gnu_ld = xno; then
2175                         tm_file="${tm_file} sparc/sol26-sld.h"
2176                 fi
2177                 ;;
2178         *-*-solaris2.[789] | *-*-solaris2.1[0-9]*)
2179                 tm_file="sparc/biarch64.h ${tm_file} sparc/sol2-bi.h"
2180                 if test x$gnu_ld = xyes; then
2181                         tm_file="${tm_file} sparc/sol2-gld-bi.h"
2182                 fi
2183                 if test x$gas = xyes; then
2184                         tm_file="${tm_file} sparc/sol2-gas-bi.h"
2185                 fi
2186                 tm_file="${tm_file} tm-dwarf2.h"
2187                 tmake_file="$tmake_file sparc/t-sol2-64"
2188                 need_64bit_hwint=yes
2189                 test x$with_cpu != x || with_cpu=v9
2190                 ;;
2191         esac
2192         c_target_objs="sol2-c.o"
2193         cxx_target_objs="sol2-c.o"
2194         extra_objs="sol2.o"
2195         tm_p_file="${tm_p_file} sol2-protos.h"
2196         extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
2197         case ${enable_threads}:${have_pthread_h}:${have_thread_h} in
2198           "":yes:* | yes:yes:* )
2199                 case ${target} in
2200                   *-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
2201                         thread_file=posix95
2202                         ;;
2203                   *)
2204                         thread_file=posix
2205                         ;;
2206                 esac
2207                 ;;
2208           "":*:yes | yes:*:yes )
2209                 thread_file=solaris
2210                 ;;
2211         esac
2212         ;;
2213 sparc-*-sysv4*)
2214         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sysv4-only.h"
2215         tmake_file=t-svr4
2216         extra_parts="crtbegin.o crtend.o"
2217         use_fixproto=yes
2218         ;;
2219 sparc64-*-elf*)
2220         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/sp64-elf.h"
2221         extra_options="${extra_options} sparc/little-endian.opt"
2222         tmake_file="${tmake_file} sparc/t-crtfm"
2223         extra_parts="crtbegin.o crtend.o"
2224         use_fixproto=yes
2225         ;;
2226 sparc64-*-freebsd*|ultrasparc-*-freebsd*)
2227         tm_file="${tm_file} ${fbsd_tm_file} dbxelf.h elfos.h sparc/sysv4.h sparc/freebsd.h"
2228         extra_options="${extra_options} sparc/long-double-switch.opt"
2229         tmake_file="${tmake_file} sparc/t-crtfm"
2230         case "x$with_cpu" in
2231                 xultrasparc) ;;
2232                 x) with_cpu=ultrasparc ;;
2233                 *) echo "$with_cpu not supported for freebsd target"; exit 1 ;;
2234         esac
2235         need_64bit_hwint=yes
2236         ;;
2237 sparc64-*-linux*)               # 64-bit SPARC's running GNU/Linux
2238         tm_file="sparc/biarch64.h ${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
2239         extra_options="${extra_options} sparc/long-double-switch.opt"
2240         tmake_file="${tmake_file} sparc/t-linux sparc/t-linux64 sparc/t-crtfm"
2241         ;;
2242 sparc64-*-netbsd*)
2243         tm_file="sparc/biarch64.h ${tm_file}"
2244         tm_file="${tm_file} dbxelf.h elfos.h svr4.h sparc/sysv4.h netbsd.h netbsd-elf.h sparc/netbsd-elf.h"
2245         extra_options="${extra_options} sparc/long-double-switch.opt"
2246         tmake_file="${tmake_file} sparc/t-netbsd64"
2247         ;;
2248 strongarm-*-elf*)
2249         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2250         tmake_file="arm/t-arm arm/t-strongarm-elf"
2251         out_file=arm/arm.c
2252         md_file=arm/arm.md
2253         extra_modes=arm/arm-modes.def
2254         use_fixproto=yes
2255         ;;
2256 strongarm-*-pe)
2257         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/strongarm-coff.h arm/arm.h arm/pe.h arm/strongarm-pe.h"
2258         tmake_file="arm/t-arm arm/t-strongarm-pe"
2259         out_file=arm/arm.c
2260         md_file=arm/arm.md
2261         extra_modes=arm/arm-modes.def
2262         extra_options="${extra_options} arm/pe.opt"
2263         extra_objs=pe.o
2264         use_fixproto=yes
2265         ;;
2266 strongarm-*-kaos*)
2267         tm_file="arm/strongarm-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h kaos.h arm/kaos-strongarm.h"
2268         tmake_file="arm/t-arm arm/t-strongarm-elf"
2269         out_file=arm/arm.c
2270         md_file=arm/arm.md
2271         extra_modes=arm/arm-modes.def
2272         ;;
2273 v850e1-*-*)
2274         target_cpu_default="TARGET_CPU_v850e1"
2275         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2276         tm_p_file=v850/v850-protos.h
2277         tmake_file=v850/t-v850e
2278         md_file=v850/v850.md
2279         out_file=v850/v850.c
2280         extra_options="${extra_options} v850/v850.opt"
2281         if test x$stabs = xyes
2282         then
2283                 tm_file="${tm_file} dbx.h"
2284         fi
2285         use_collect2=no
2286         c_target_objs="v850-c.o"
2287         cxx_target_objs="v850-c.o"
2288         use_fixproto=yes
2289         ;;
2290 v850e-*-*)
2291         target_cpu_default="TARGET_CPU_v850e"
2292         tm_file="dbxelf.h elfos.h svr4.h v850/v850.h"
2293         tm_p_file=v850/v850-protos.h
2294         tmake_file=v850/t-v850e
2295         md_file=v850/v850.md
2296         out_file=v850/v850.c
2297         extra_options="${extra_options} v850/v850.opt"
2298         if test x$stabs = xyes
2299         then
2300                 tm_file="${tm_file} dbx.h"
2301         fi
2302         use_collect2=no
2303         c_target_objs="v850-c.o"
2304         cxx_target_objs="v850-c.o"
2305         use_fixproto=yes
2306         ;;
2307 v850-*-*)
2308         target_cpu_default="TARGET_CPU_generic"
2309         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2310         tmake_file=v850/t-v850
2311         if test x$stabs = xyes
2312         then
2313                 tm_file="${tm_file} dbx.h"
2314         fi
2315         use_collect2=no
2316         c_target_objs="v850-c.o"
2317         cxx_target_objs="v850-c.o"
2318         use_fixproto=yes
2319         ;;
2320 vax-*-bsd*)                     # VAXen running BSD
2321         tm_file="${tm_file} vax/bsd.h"
2322         tmake_file=vax/t-memfuncs
2323         use_collect2=yes
2324         use_fixproto=yes
2325         ;;
2326 vax-*-sysv*)                    # VAXen running system V
2327         tm_file="${tm_file} vax/vaxv.h"
2328         tmake_file=vax/t-memfuncs
2329         use_fixproto=yes
2330         ;;
2331 vax-*-netbsdelf*)
2332         tm_file="${tm_file} elfos.h netbsd.h netbsd-elf.h vax/elf.h vax/netbsd-elf.h"
2333         ;;
2334 vax-*-netbsd*)
2335         tm_file="${tm_file} netbsd.h netbsd-aout.h vax/netbsd.h"
2336         tmake_file=t-netbsd
2337         extra_parts=""
2338         use_collect2=yes
2339         ;;
2340 vax-*-openbsd*)
2341         tm_file="vax/vax.h vax/openbsd1.h openbsd.h vax/openbsd.h"
2342         use_collect2=yes
2343         ;;
2344 vax-*-ultrix*)                  # VAXen running ultrix
2345         tm_file="${tm_file} vax/ultrix.h"
2346         tmake_file=vax/t-memfuncs
2347         use_fixproto=yes
2348         ;;
2349 xscale-*-elf)
2350         tm_file="arm/xscale-elf.h dbxelf.h elfos.h arm/unknown-elf.h arm/elf.h arm/aout.h arm/arm.h"
2351         tmake_file="arm/t-arm arm/t-xscale-elf"
2352         out_file=arm/arm.c
2353         md_file=arm/arm.md
2354         extra_modes=arm/arm-modes.def
2355         use_fixproto=yes
2356         ;;
2357 xscale-*-coff)
2358         tm_file="arm/semi.h arm/aout.h arm/coff.h dbxcoff.h arm/xscale-coff.h arm/arm.h"
2359         tmake_file="arm/t-arm arm/t-xscale-coff"
2360         out_file=arm/arm.c
2361         md_file=arm/arm.md
2362         extra_modes=arm/arm-modes.def
2363         use_fixproto=yes
2364         ;;
2365 xstormy16-*-elf)
2366         # For historical reasons, the target files omit the 'x'.
2367         tm_file="dbxelf.h elfos.h svr4.h stormy16/stormy16.h"
2368         tm_p_file=stormy16/stormy16-protos.h
2369         md_file=stormy16/stormy16.md
2370         out_file=stormy16/stormy16.c
2371         extra_options=stormy16/stormy16.opt
2372         tmake_file="stormy16/t-stormy16"
2373         extra_parts="crtbegin.o crtend.o"
2374         use_fixproto=yes
2375         ;;
2376 xtensa-*-elf*)
2377         tm_file="${tm_file} dbxelf.h elfos.h svr4.h xtensa/elf.h"
2378         tmake_file="xtensa/t-xtensa xtensa/t-elf"
2379         ;;
2380 xtensa-*-linux*)
2381         tm_file="${tm_file} dbxelf.h elfos.h svr4.h linux.h xtensa/linux.h"
2382         tmake_file="${tmake_file} xtensa/t-xtensa xtensa/t-linux"
2383         ;;
2384 am33_2.0-*-linux*)
2385         tm_file="mn10300/mn10300.h dbxelf.h elfos.h linux.h mn10300/linux.h"
2386         tmake_file="${tmake_file} mn10300/t-linux"
2387         gas=yes gnu_ld=yes
2388         extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
2389         use_collect2=no
2390         ;;
2391 m32c-*-elf*)
2392         tm_file="dbxelf.h elfos.h svr4.h ${tm_file}"
2393         c_target_objs="m32c-pragma.o"
2394         cxx_target_objs="m32c-pragma.o"
2395         use_fixproto=yes
2396         ;;
2397 *)
2398         echo "*** Configuration ${target} not supported" 1>&2
2399         exit 1
2400         ;;
2401 esac
2402
2403 case ${target} in
2404 i[34567]86-*-linux*aout* | i[34567]86-*-linux*libc1)
2405         tmake_file="${tmake_file} i386/t-gmm_malloc"
2406         ;;
2407 i[34567]86-*-linux* | x86_64-*-linux*)
2408         tmake_file="${tmake_file} i386/t-pmm_malloc"
2409         ;;
2410 i[34567]86-*-* | x86_64-*-*)
2411         tmake_file="${tmake_file} i386/t-gmm_malloc"
2412         ;;
2413 esac
2414
2415 # Support for --with-cpu and related options (and a few unrelated options,
2416 # too).
2417 case ${with_cpu} in
2418   yes | no)
2419     echo "--with-cpu must be passed a value" 1>&2
2420     exit 1
2421     ;;
2422 esac
2423
2424 # If there is no $with_cpu option, try to infer one from ${target}.
2425 # This block sets nothing except for with_cpu.
2426 if test x$with_cpu = x ; then
2427   case ${target} in
2428     ep9312-*-*)
2429       # A Cirrus ARM variant.
2430       with_cpu="ep9312"
2431       ;;
2432     i386-*-*)
2433       with_cpu=i386
2434       ;;
2435     i486-*-*)
2436       with_cpu=i486
2437       ;;
2438     i586-*-*)
2439       case ${target_noncanonical} in
2440         k6_2-*)
2441           with_cpu=k6-2
2442           ;;
2443         k6_3-*)
2444           with_cpu=k6-3
2445           ;;
2446         k6-*)
2447           with_cpu=k6
2448           ;;
2449         pentium_mmx-*|winchip_c6-*|winchip2-*|c3-*)
2450           with_cpu=pentium-mmx
2451           ;;
2452         *)
2453           with_cpu=pentium
2454           ;;
2455       esac
2456       ;;
2457     i686-*-* | i786-*-*)
2458       case ${target_noncanonical} in
2459         k8-*|opteron-*|athlon_64-*)
2460           with_cpu=k8
2461           ;;
2462         athlon_xp-*|athlon_mp-*|athlon_4-*)
2463           with_cpu=athlon-4
2464           ;;
2465         athlon_tbird-*|athlon-*)
2466           with_cpu=athlon
2467           ;;
2468         pentium2-*)
2469           with_cpu=pentium2
2470           ;;
2471         pentium3-*|pentium3m-*)
2472           with_cpu=pentium3
2473           ;;
2474         pentium4-*|pentium4m-*)
2475           with_cpu=pentium4
2476           ;;
2477         prescott-*)
2478           with_cpu=prescott
2479           ;;
2480         nocona-*)
2481           with_cpu=nocona
2482           ;;
2483         pentium_m-*)
2484           with_cpu=pentium-m
2485           ;;
2486         pentiumpro-*)
2487           with_cpu=pentiumpro
2488           ;;
2489         *)
2490           with_cpu=generic
2491           ;;
2492       esac
2493       ;;
2494     x86_64-*-*)
2495       case ${target_noncanonical} in
2496         k8-*|opteron-*|athlon_64-*)
2497           with_cpu=k8
2498           ;;
2499         nocona-*)
2500           with_cpu=nocona
2501           ;;
2502         *)
2503           with_cpu=generic
2504           ;;
2505       esac
2506       ;;
2507     alphaev6[78]*-*-*)
2508       with_cpu=ev67
2509       ;;
2510     alphaev6*-*-*)
2511       with_cpu=ev6
2512       ;;
2513     alphapca56*-*-*)
2514       with_cpu=pca56
2515       ;;
2516     alphaev56*-*-*)
2517       with_cpu=ev56
2518       ;;
2519     alphaev5*-*-*)
2520       with_cpu=ev5
2521       ;;
2522     frv-*-*linux* | frv400-*-*linux*)
2523       with_cpu=fr400
2524       ;;
2525     frv550-*-*linux*)
2526       with_cpu=fr550
2527       ;;
2528     sparc*-*-*)
2529       with_cpu="`echo ${target} | sed 's/-.*$//'`"
2530       ;;
2531   esac
2532 fi
2533
2534 # Similarly for --with-float
2535 if test x$with_float = x; then
2536         case ${target} in
2537         ep9312-*-*)
2538                 with_float=hard
2539                 ;;
2540         esac
2541 fi
2542
2543 # Similarly for --with-schedule.
2544 if test x$with_schedule = x; then
2545         case ${target} in
2546         hppa1* | parisc1*)
2547                 # Override default PA8000 scheduling model.
2548                 with_schedule=7100LC
2549                 ;;
2550         esac
2551 fi
2552
2553 # Validate and mark as valid any --with options supported
2554 # by this target.  In order to use a particular --with option
2555 # you must list it in supported_defaults; validating the value
2556 # is optional.  This case statement should set nothing besides
2557 # supported_defaults.
2558
2559 supported_defaults=
2560 case "${target}" in
2561         alpha*-*-*)
2562                 supported_defaults="cpu tune"
2563                 for which in cpu tune; do
2564                         eval "val=\$with_$which"
2565                         case "$val" in
2566                         "" \
2567                         | ev4 | ev45 | 21064 | ev5 | 21164 | ev56 | 21164a \
2568                         | pca56 | 21164PC | 21164pc | ev6 | 21264 | ev67 \
2569                         | 21264a)
2570                                 ;;
2571                         *)
2572                                 echo "Unknown CPU used in --with-$which=$val" 1>&2
2573                                 exit 1
2574                                 ;;
2575                         esac
2576                 done
2577                 ;;
2578
2579         arm*-*-*)
2580                 supported_defaults="arch cpu float tune fpu abi mode"
2581                 for which in cpu tune; do
2582                         # See if it matches any of the entries in arm-cores.def
2583                         eval "val=\$with_$which"
2584                         if [ x"$val" = x ] \
2585                             || grep "^ARM_CORE(\"$val\"," \
2586                                     ${srcdir}/config/arm/arm-cores.def \
2587                                     > /dev/null; then
2588                           # Ok
2589                           new_val=`grep "^ARM_CORE(\"$val\"," \
2590                                 ${srcdir}/config/arm/arm-cores.def | \
2591                                 sed -e 's/^[^,]*,[      ]*//' | \
2592                                 sed -e 's/,.*$//'`
2593                           eval "target_${which}_cname=$new_val"
2594                         echo "For $val real value is $new_val"
2595                           true
2596                         else
2597                           echo "Unknown CPU used in --with-$which=$val" 1>&2
2598                           exit 1
2599                         fi
2600                 done
2601
2602                 case "$with_arch" in
2603                 "" \
2604                 | armv[23456] | armv2a | armv3m | armv4t | armv5t \
2605                 | armv5te | armv6j |armv6k | armv6z | armv6zk \
2606                 | iwmmxt | ep9312)
2607                         # OK
2608                         ;;
2609                 *)
2610                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2611                         exit 1
2612                         ;;
2613                 esac
2614
2615                 case "$with_float" in
2616                 "" \
2617                 | soft | hard | softfp)
2618                         # OK
2619                         ;;
2620                 *)
2621                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2622                         exit 1
2623                         ;;
2624                 esac
2625
2626                 case "$with_fpu" in
2627                 "" \
2628                 | fpa | fpe2 | fpe3 | maverick | vfp )
2629                         # OK
2630                         ;;
2631                 *)
2632                         echo "Unknown fpu used in --with-fpu=$with_fpu" 2>&1
2633                         exit 1
2634                         ;;
2635                 esac
2636
2637                 case "$with_abi" in
2638                 "" \
2639                 | apcs-gnu | atpcs | aapcs | iwmmxt )
2640                         #OK
2641                         ;;
2642                 *)
2643                         echo "Unknown ABI used in --with-abi=$with_abi"
2644                         exit 1
2645                         ;;
2646                 esac
2647
2648                 case "$with_mode" in
2649                 "" \
2650                 | arm | thumb )
2651                         #OK
2652                         ;;
2653                 *)
2654                         echo "Unknown mode used in --with-mode=$with_mode"
2655                         exit 1
2656                         ;;
2657                 esac
2658
2659                 if test "x$with_arch" != x && test "x$with_cpu" != x; then
2660                         echo "Warning: --with-arch overrides --with-cpu=$with_cpu" 1>&2
2661                 fi
2662                 ;;
2663
2664         fr*-*-*linux*)
2665                 supported_defaults=cpu
2666                 case "$with_cpu" in
2667                 fr400) ;;
2668                 fr550) ;;
2669                 *)
2670                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2671                         exit 1
2672                         ;;
2673                 esac
2674                 ;;
2675
2676         m68k*-linux*)
2677                 supported_defaults="cpu"
2678                 case "$with_cpu" in
2679                 "" | "m68020" | "m68030" | "m68040" | "m68060" | "m68020-40" | "m68020-60")
2680                         # OK
2681                         ;;
2682                 *)
2683                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2684                         echo "m68020 m68030 m68040 m68060 m68020-40 m68020-60" 1>&2
2685                         exit 1
2686                         ;;
2687                 esac
2688                 ;;
2689
2690         hppa*-*-* | parisc*-*-*)
2691                 supported_defaults="arch schedule"
2692
2693                 case "$with_arch" in
2694                 "" | 1.0 | 1.1 | 2.0)
2695                         # OK
2696                         ;;
2697                 *)
2698                         echo "Unknown architecture used in --with-arch=$with_arch" 1>&2
2699                         exit 1
2700                         ;;
2701                 esac
2702
2703                 case "$with_schedule" in
2704                 "" | 700 | 7100 | 7100LC | 7200 | 7300 | 8000)
2705                         # OK
2706                         ;;
2707                 *)
2708                         echo "Unknown processor used in --with-schedule=$with_schedule." 1>&2
2709                         exit 1
2710                         ;;
2711                 esac
2712                 ;;
2713
2714         i[34567]86-*-* | x86_64-*-*)
2715                 supported_defaults="arch cpu tune"
2716                 for which in arch cpu tune; do
2717                         eval "val=\$with_$which"
2718                         case ${val} in
2719                         i386 | i486 \
2720                         | i586 | pentium | pentium-mmx | winchip-c6 | winchip2 \
2721                         | c3 | c3-2 | i686 | pentiumpro | pentium2 | pentium3 \
2722                         | pentium4 | k6 | k6-2 | k6-3 | athlon | athlon-tbird \
2723                         | athlon-4 | athlon-xp | athlon-mp \
2724                         | prescott | pentium-m | pentium4m | pentium3m)
2725                                 case "${target}" in
2726                                   x86_64-*-*)
2727                                       echo "CPU given in --with-$which=$val doesn't support 64bit mode." 1>&2
2728                                       exit 1
2729                                       ;;
2730                                 esac
2731                                 # OK
2732                                 ;;
2733                         "" | k8 | opteron | athlon64 | athlon-fx | nocona | generic)
2734                                 # OK
2735                                 ;;
2736                         *)
2737                                 echo "Unknown CPU given in --with-$which=$val." 1>&2
2738                                 exit 1
2739                                 ;;
2740                         esac
2741                 done
2742                 ;;
2743
2744         mips*-*-*)
2745                 supported_defaults="abi arch float tune divide"
2746
2747                 case ${with_float} in
2748                 "" | soft | hard)
2749                         # OK
2750                         ;;
2751                 *)
2752                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2753                         exit 1
2754                         ;;
2755                 esac
2756
2757                 case ${with_abi} in
2758                 "" | 32 | o64 | n32 | 64 | eabi)
2759                         # OK
2760                         ;;
2761                 *)
2762                         echo "Unknown ABI used in --with-abi=$with_abi" 1>&2
2763                         exit 1
2764                         ;;
2765                 esac
2766
2767                 case ${with_divide} in
2768                 "" | breaks | traps)
2769                         # OK
2770                         ;;
2771                 *)
2772                         echo "Unknown division check type use in --with-divide=$with_divide" 1>&2
2773                         exit 1
2774                 esac
2775                 ;;
2776
2777         mt-*-*)
2778                 supported_defaults="arch"
2779
2780                 case "$with_arch" in
2781                 "" \
2782                 | ms1-64-001 \
2783                 | ms1-16-002 \
2784                 | ms1-16-003 \
2785                 | ms2 \
2786                 | "")
2787                         # OK
2788                         ;;
2789                 *)
2790                         echo "Unknown arch used in --with-arch=$with_arch" 1>&2
2791                         exit 1
2792                         ;;
2793                 esac
2794                 ;;
2795
2796         powerpc*-*-* | rs6000-*-*)
2797                 supported_defaults="cpu float tune"
2798
2799                 for which in cpu tune; do
2800                         eval "val=\$with_$which"
2801                         case ${val} in
2802                         default32 | default64)
2803                                 with_which="with_$which"
2804                                 eval $with_which=
2805                                 ;;
2806                         405cr)
2807                                 tm_defines="${tm_defines} CONFIG_PPC405CR"
2808                                 eval "with_$which=405"
2809                                 ;;
2810                         "" | common \
2811                         | power | power[23456] | powerpc | powerpc64 \
2812                         | rios | rios1 | rios2 | rsc | rsc1 | rs64a \
2813                         | 401 | 403 | 405 | 405fp | 440 | 440fp | 505 \
2814                         | 601 | 602 | 603 | 603e | ec603e | 604 \
2815                         | 604e | 620 | 630 | 740 | 750 | 7400 | 7450 \
2816                         | 854[08] | 801 | 821 | 823 | 860 | 970 | G3 | G4 | G5)
2817                                 # OK
2818                                 ;;
2819                         *)
2820                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2821                                 exit 1
2822                                 ;;
2823                         esac
2824                 done
2825                 ;;
2826
2827         s390*-*-*)
2828                 supported_defaults="arch mode tune"
2829
2830                 for which in arch tune; do
2831                         eval "val=\$with_$which"
2832                         case ${val} in
2833                         "" | g5 | g6 | z900 | z990 | z9-109)
2834                                 # OK
2835                                 ;;
2836                         *)
2837                                 echo "Unknown cpu used in --with-$which=$val." 1>&2
2838                                 exit 1
2839                                 ;;
2840                         esac
2841                 done
2842
2843                 case ${with_mode} in
2844                 "" | esa | zarch)
2845                         # OK
2846                         ;;
2847                 *)
2848                         echo "Unknown architecture mode used in --with-mode=$with_mode." 1>&2
2849                         exit 1
2850                         ;;
2851                 esac
2852                 ;;
2853
2854         sh[123456ble]-*-* | sh-*-*)
2855                 supported_defaults="cpu"
2856                 case "`echo $with_cpu | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ_ abcdefghijklmnopqrstuvwxyz- | sed s/sh/m/`" in
2857                 "" | m1 | m2 | m2e | m3 | m3e | m4 | m4-single | m4-single-only | m4-nofpu )
2858                         # OK
2859                         ;;
2860                 m2a | m2a-single | m2a-single-only | m2a-nofpu)
2861                         ;;
2862                 m4a | m4a-single | m4a-single-only | m4a-nofpu | m4al)
2863                         ;;
2864                 *)
2865                         echo "Unknown CPU used in --with-cpu=$with_cpu, known values:"  1>&2
2866                         echo "m1 m2 m2e m3 m3e m4 m4-single m4-single-only m4-nofpu" 1>&2
2867                         echo "m4a m4a-single m4a-single-only m4a-nofpu m4al" 1>&2
2868                         echo "m2a m2a-single m2a-single-only m2a-nofpu" 1>&2
2869                         exit 1
2870                         ;;
2871                 esac
2872                 ;;
2873         sparc*-*-*)
2874                 supported_defaults="cpu float tune"
2875
2876                 for which in cpu tune; do
2877                         eval "val=\$with_$which"
2878                         case ${val} in
2879                         "" | sparc | sparcv9 | sparc64 | sparc86x \
2880                         | v7 | cypress | v8 | supersparc | sparclite | f930 \
2881                         | f934 | hypersparc | sparclite86x | sparclet | tsc701 \
2882                         | v9 | ultrasparc | ultrasparc3 | niagara)
2883                                 # OK
2884                                 ;;
2885                         *)
2886                                 echo "Unknown cpu used in --with-$which=$val" 1>&2
2887                                 exit 1
2888                                 ;;
2889                         esac
2890                 done
2891
2892                 case ${with_float} in
2893                 "" | soft | hard)
2894                         # OK
2895                         ;;
2896                 *)
2897                         echo "Unknown floating point type used in --with-float=$with_float" 1>&2
2898                         exit 1
2899                         ;;
2900                 esac
2901                 ;;
2902
2903         v850*-*-*)
2904                 supported_defaults=cpu
2905                 case ${with_cpu} in
2906                 "" | v850e | v850e1)
2907                         # OK
2908                         ;;
2909                 *)
2910                         echo "Unknown cpu used in --with-cpu=$with_cpu" 1>&2
2911                         exit 1
2912                         ;;
2913                 esac
2914                 ;;
2915 esac
2916
2917 # Set some miscellaneous flags for particular targets.
2918 target_cpu_default2=
2919 case ${target} in
2920         alpha*-*-*)
2921                 if test x$gas = xyes
2922                 then
2923                         target_cpu_default2="MASK_GAS"
2924                 fi
2925                 ;;
2926
2927         arm*-*-*)
2928                 if test x$target_cpu_cname = x
2929                 then
2930                         target_cpu_default2=TARGET_CPU_generic
2931                 else
2932                         target_cpu_default2=TARGET_CPU_$target_cpu_cname
2933                 fi
2934                 ;;
2935
2936         m68k*-linux*)
2937                 case "x$with_cpu" in
2938                 x)
2939                         # The most generic
2940                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2941                         ;;
2942                 xm68020)
2943                         target_cpu_default2="(MASK_68020|MASK_68881|MASK_BITFIELD)"
2944                         ;;
2945                 xm68030)
2946                         target_cpu_default2="(MASK_68030|MASK_68020|MASK_68881|MASK_BITFIELD)"
2947                         ;;
2948                 xm68040)
2949                         target_cpu_default2="(MASK_68040|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2950                         ;;
2951                 xm68060)
2952                         target_cpu_default2="(MASK_68060|MASK_68040_ONLY|MASK_68020|MASK_68881|MASK_BITFIELD)"
2953                         ;;
2954                 xm68020-40)
2955                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040)"
2956                         ;;
2957                 xm68020-60)
2958                         target_cpu_default2="(MASK_BITFIELD|MASK_68881|MASK_68020|MASK_68040|MASK_68060)"
2959                         ;;
2960                 *)
2961                         echo "Unknown CPU used in --with-cpu=$with_cpu"  1>&2
2962                         exit 1
2963                         ;;
2964                 esac
2965                 ;;
2966
2967         hppa*-*-* | parisc*-*-*)
2968                 target_cpu_default2="MASK_BIG_SWITCH"
2969                 if test x$gas = xyes
2970                 then
2971                         target_cpu_default2="${target_cpu_default2}|MASK_GAS|MASK_JUMP_IN_DELAY"
2972                 fi
2973                 ;;
2974
2975         mips*-*-*)
2976                 if test x$gnu_ld = xyes
2977                 then
2978                         target_cpu_default2="MASK_SPLIT_ADDRESSES"
2979                 fi
2980                 case ${target} in
2981                         mips*el-*-*)
2982                                 tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
2983                                 ;;
2984                 esac
2985                 if test "x$enable_gofast" = xyes
2986                 then
2987                         tm_defines="US_SOFTWARE_GOFAST $tm_defines"
2988                         tmake_file="mips/t-gofast $tmake_file"
2989                 else
2990                         tmake_file="mips/t-mips $tmake_file"
2991                 fi
2992                 ;;
2993
2994         powerpc*-*-* | rs6000-*-*)
2995                 # FIXME: The PowerPC port uses the value set at compile time,
2996                 # although it's only cosmetic.
2997                 if test "x$with_cpu" != x
2998                 then
2999                         target_cpu_default2="\\\"$with_cpu\\\""
3000                 fi
3001                 out_file=rs6000/rs6000.c
3002                 c_target_objs="${c_target_objs} rs6000-c.o"
3003                 cxx_target_objs="${cxx_target_objs} rs6000-c.o"
3004                 tmake_file="rs6000/t-rs6000 ${tmake_file}"
3005
3006                 if test x$enable_e500_double = xyes
3007                 then
3008                         tm_file="$tm_file rs6000/e500-double.h"
3009                 fi
3010                 ;;
3011
3012         sh[123456ble]*-*-* | sh-*-*)
3013                 c_target_objs="${c_target_objs} sh-c.o"
3014                 cxx_target_objs="${cxx_target_objs} sh-c.o"
3015                 ;;
3016
3017         sparc*-*-*)
3018                 # Some standard aliases.
3019                 case x$with_cpu in
3020                 xsparc)
3021                         with_cpu=v7
3022                         ;;
3023                 xsparcv9 | xsparc64)
3024                         with_cpu=v9
3025                         ;;
3026                 esac
3027
3028                 # The SPARC port checks this value at compile-time.
3029                 target_cpu_default2="TARGET_CPU_$with_cpu"
3030                 ;;
3031         v850*-*-*)
3032                 # FIXME: The v850 is "special" in that it does not support
3033                 # runtime CPU selection, only --with-cpu.
3034                 case "x$with_cpu" in
3035                 x)
3036                         ;;
3037                 xv850e)
3038                         target_cpu_default2="TARGET_CPU_$with_cpu"
3039                         ;;
3040                 esac
3041                 ;;
3042 esac
3043
3044 t=
3045 all_defaults="abi cpu arch tune schedule float mode fpu divide"
3046 for option in $all_defaults
3047 do
3048         eval "val=\$with_$option"
3049         if test -n "$val"; then
3050                 case " $supported_defaults " in
3051                 *" $option "*)
3052                         ;;
3053                 *)
3054                         echo "This target does not support --with-$option." 2>&1
3055                         echo "Valid --with options are: $supported_defaults" 2>&1
3056                         exit 1
3057                         ;;
3058                 esac
3059
3060                 if test "x$t" = x
3061                 then
3062                         t="{ \"$option\", \"$val\" }"
3063                 else
3064                         t="${t}, { \"$option\", \"$val\" }"
3065                 fi
3066         fi
3067 done
3068
3069 if test "x$t" = x
3070 then
3071         configure_default_options="{ { NULL, NULL} }"
3072 else
3073         configure_default_options="{ ${t} }"
3074 fi
3075
3076 if test "$target_cpu_default2" != ""
3077 then
3078         if test "$target_cpu_default" != ""
3079         then
3080                 target_cpu_default="(${target_cpu_default}|${target_cpu_default2})"
3081         else
3082                 target_cpu_default=$target_cpu_default2
3083         fi
3084 fi