* call.c (z_candidate::template_decl): Rename from template.
[official-gcc.git] / gcc / sched-deps.c
blob7b8496c8c8e0f198a4765fe378da62c6baf06a0e
1 /* Instruction scheduling pass. This file computes dependencies between
2 instructions.
3 Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
4 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
5 Contributed by Michael Tiemann (tiemann@cygnus.com) Enhanced by,
6 and currently maintained by, Jim Wilson (wilson@cygnus.com)
8 This file is part of GCC.
10 GCC is free software; you can redistribute it and/or modify it under
11 the terms of the GNU General Public License as published by the Free
12 Software Foundation; either version 2, or (at your option) any later
13 version.
15 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
16 WARRANTY; without even the implied warranty of MERCHANTABILITY or
17 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
18 for more details.
20 You should have received a copy of the GNU General Public License
21 along with GCC; see the file COPYING. If not, write to the Free
22 Software Foundation, 59 Temple Place - Suite 330, Boston, MA
23 02111-1307, USA. */
25 #include "config.h"
26 #include "system.h"
27 #include "coretypes.h"
28 #include "tm.h"
29 #include "toplev.h"
30 #include "rtl.h"
31 #include "tm_p.h"
32 #include "hard-reg-set.h"
33 #include "basic-block.h"
34 #include "regs.h"
35 #include "function.h"
36 #include "flags.h"
37 #include "insn-config.h"
38 #include "insn-attr.h"
39 #include "except.h"
40 #include "toplev.h"
41 #include "recog.h"
42 #include "sched-int.h"
43 #include "params.h"
44 #include "cselib.h"
45 #include "df.h"
48 static regset_head reg_pending_sets_head;
49 static regset_head reg_pending_clobbers_head;
50 static regset_head reg_pending_uses_head;
52 static regset reg_pending_sets;
53 static regset reg_pending_clobbers;
54 static regset reg_pending_uses;
56 /* The following enumeration values tell us what dependencies we
57 should use to implement the barrier. We use true-dependencies for
58 TRUE_BARRIER and anti-dependencies for MOVE_BARRIER. */
59 enum reg_pending_barrier_mode
61 NOT_A_BARRIER = 0,
62 MOVE_BARRIER,
63 TRUE_BARRIER
66 static enum reg_pending_barrier_mode reg_pending_barrier;
68 /* To speed up the test for duplicate dependency links we keep a
69 record of dependencies created by add_dependence when the average
70 number of instructions in a basic block is very large.
72 Studies have shown that there is typically around 5 instructions between
73 branches for typical C code. So we can make a guess that the average
74 basic block is approximately 5 instructions long; we will choose 100X
75 the average size as a very large basic block.
77 Each insn has associated bitmaps for its dependencies. Each bitmap
78 has enough entries to represent a dependency on any other insn in
79 the insn chain. All bitmap for true dependencies cache is
80 allocated then the rest two ones are also allocated. */
81 static bitmap_head *true_dependency_cache;
82 static bitmap_head *anti_dependency_cache;
83 static bitmap_head *output_dependency_cache;
84 int cache_size;
86 /* To speed up checking consistency of formed forward insn
87 dependencies we use the following cache. Another possible solution
88 could be switching off checking duplication of insns in forward
89 dependencies. */
90 #ifdef ENABLE_CHECKING
91 static bitmap_head *forward_dependency_cache;
92 #endif
94 static int deps_may_trap_p (rtx);
95 static void add_dependence_list (rtx, rtx, enum reg_note);
96 static void add_dependence_list_and_free (rtx, rtx *, enum reg_note);
97 static void set_sched_group_p (rtx);
99 static void flush_pending_lists (struct deps *, rtx, int, int);
100 static void sched_analyze_1 (struct deps *, rtx, rtx);
101 static void sched_analyze_2 (struct deps *, rtx, rtx);
102 static void sched_analyze_insn (struct deps *, rtx, rtx, rtx);
104 static rtx get_condition (rtx);
105 static int conditions_mutex_p (rtx, rtx);
107 /* Return nonzero if a load of the memory reference MEM can cause a trap. */
109 static int
110 deps_may_trap_p (rtx mem)
112 rtx addr = XEXP (mem, 0);
114 if (REG_P (addr) && REGNO (addr) >= FIRST_PSEUDO_REGISTER)
116 rtx t = get_reg_known_value (REGNO (addr));
117 if (t)
118 addr = t;
120 return rtx_addr_can_trap_p (addr);
123 /* Return the INSN_LIST containing INSN in LIST, or NULL
124 if LIST does not contain INSN. */
127 find_insn_list (rtx insn, rtx list)
129 while (list)
131 if (XEXP (list, 0) == insn)
132 return list;
133 list = XEXP (list, 1);
135 return 0;
138 /* Find the condition under which INSN is executed. */
140 static rtx
141 get_condition (rtx insn)
143 rtx pat = PATTERN (insn);
144 rtx cond;
146 if (pat == 0)
147 return 0;
148 if (GET_CODE (pat) == COND_EXEC)
149 return COND_EXEC_TEST (pat);
150 if (!JUMP_P (insn))
151 return 0;
152 if (GET_CODE (pat) != SET || SET_SRC (pat) != pc_rtx)
153 return 0;
154 if (GET_CODE (SET_DEST (pat)) != IF_THEN_ELSE)
155 return 0;
156 pat = SET_DEST (pat);
157 cond = XEXP (pat, 0);
158 if (GET_CODE (XEXP (cond, 1)) == LABEL_REF
159 && XEXP (cond, 2) == pc_rtx)
160 return cond;
161 else if (GET_CODE (XEXP (cond, 2)) == LABEL_REF
162 && XEXP (cond, 1) == pc_rtx)
163 return gen_rtx_fmt_ee (reverse_condition (GET_CODE (cond)), GET_MODE (cond),
164 XEXP (cond, 0), XEXP (cond, 1));
165 else
166 return 0;
169 /* Return nonzero if conditions COND1 and COND2 can never be both true. */
171 static int
172 conditions_mutex_p (rtx cond1, rtx cond2)
174 if (COMPARISON_P (cond1)
175 && COMPARISON_P (cond2)
176 && GET_CODE (cond1) == reverse_condition (GET_CODE (cond2))
177 && XEXP (cond1, 0) == XEXP (cond2, 0)
178 && XEXP (cond1, 1) == XEXP (cond2, 1))
179 return 1;
180 return 0;
183 /* Add ELEM wrapped in an INSN_LIST with reg note kind DEP_TYPE to the
184 LOG_LINKS of INSN, if not already there. DEP_TYPE indicates the
185 type of dependence that this link represents. The function returns
186 nonzero if a new entry has been added to insn's LOG_LINK. */
189 add_dependence (rtx insn, rtx elem, enum reg_note dep_type)
191 rtx link;
192 int present_p;
193 rtx cond1, cond2;
195 /* Don't depend an insn on itself. */
196 if (insn == elem)
197 return 0;
199 /* We can get a dependency on deleted insns due to optimizations in
200 the register allocation and reloading or due to splitting. Any
201 such dependency is useless and can be ignored. */
202 if (NOTE_P (elem))
203 return 0;
205 /* flow.c doesn't handle conditional lifetimes entirely correctly;
206 calls mess up the conditional lifetimes. */
207 /* ??? add_dependence is the wrong place to be eliding dependencies,
208 as that forgets that the condition expressions themselves may
209 be dependent. */
210 if (!CALL_P (insn) && !CALL_P (elem))
212 cond1 = get_condition (insn);
213 cond2 = get_condition (elem);
214 if (cond1 && cond2
215 && conditions_mutex_p (cond1, cond2)
216 /* Make sure first instruction doesn't affect condition of second
217 instruction if switched. */
218 && !modified_in_p (cond1, elem)
219 /* Make sure second instruction doesn't affect condition of first
220 instruction if switched. */
221 && !modified_in_p (cond2, insn))
222 return 0;
225 present_p = 1;
226 #ifdef INSN_SCHEDULING
227 /* ??? No good way to tell from here whether we're doing interblock
228 scheduling. Possibly add another callback. */
229 #if 0
230 /* (This code is guarded by INSN_SCHEDULING, otherwise INSN_BB is undefined.)
231 No need for interblock dependences with calls, since
232 calls are not moved between blocks. Note: the edge where
233 elem is a CALL is still required. */
234 if (CALL_P (insn)
235 && (INSN_BB (elem) != INSN_BB (insn)))
236 return 0;
237 #endif
239 /* If we already have a dependency for ELEM, then we do not need to
240 do anything. Avoiding the list walk below can cut compile times
241 dramatically for some code. */
242 if (true_dependency_cache != NULL)
244 enum reg_note present_dep_type = 0;
246 if (anti_dependency_cache == NULL || output_dependency_cache == NULL)
247 abort ();
248 if (bitmap_bit_p (&true_dependency_cache[INSN_LUID (insn)],
249 INSN_LUID (elem)))
250 /* Do nothing (present_set_type is already 0). */
252 else if (bitmap_bit_p (&anti_dependency_cache[INSN_LUID (insn)],
253 INSN_LUID (elem)))
254 present_dep_type = REG_DEP_ANTI;
255 else if (bitmap_bit_p (&output_dependency_cache[INSN_LUID (insn)],
256 INSN_LUID (elem)))
257 present_dep_type = REG_DEP_OUTPUT;
258 else
259 present_p = 0;
260 if (present_p && (int) dep_type >= (int) present_dep_type)
261 return 0;
263 #endif
265 /* Check that we don't already have this dependence. */
266 if (present_p)
267 for (link = LOG_LINKS (insn); link; link = XEXP (link, 1))
268 if (XEXP (link, 0) == elem)
270 #ifdef INSN_SCHEDULING
271 /* Clear corresponding cache entry because type of the link
272 may be changed. */
273 if (true_dependency_cache != NULL)
275 if (REG_NOTE_KIND (link) == REG_DEP_ANTI)
276 bitmap_clear_bit (&anti_dependency_cache[INSN_LUID (insn)],
277 INSN_LUID (elem));
278 else if (REG_NOTE_KIND (link) == REG_DEP_OUTPUT
279 && output_dependency_cache)
280 bitmap_clear_bit (&output_dependency_cache[INSN_LUID (insn)],
281 INSN_LUID (elem));
282 else
283 abort ();
285 #endif
287 /* If this is a more restrictive type of dependence than the existing
288 one, then change the existing dependence to this type. */
289 if ((int) dep_type < (int) REG_NOTE_KIND (link))
290 PUT_REG_NOTE_KIND (link, dep_type);
292 #ifdef INSN_SCHEDULING
293 /* If we are adding a dependency to INSN's LOG_LINKs, then
294 note that in the bitmap caches of dependency information. */
295 if (true_dependency_cache != NULL)
297 if ((int) REG_NOTE_KIND (link) == 0)
298 bitmap_set_bit (&true_dependency_cache[INSN_LUID (insn)],
299 INSN_LUID (elem));
300 else if (REG_NOTE_KIND (link) == REG_DEP_ANTI)
301 bitmap_set_bit (&anti_dependency_cache[INSN_LUID (insn)],
302 INSN_LUID (elem));
303 else if (REG_NOTE_KIND (link) == REG_DEP_OUTPUT)
304 bitmap_set_bit (&output_dependency_cache[INSN_LUID (insn)],
305 INSN_LUID (elem));
307 #endif
308 return 0;
310 /* Might want to check one level of transitivity to save conses. */
312 link = alloc_INSN_LIST (elem, LOG_LINKS (insn));
313 LOG_LINKS (insn) = link;
315 /* Insn dependency, not data dependency. */
316 PUT_REG_NOTE_KIND (link, dep_type);
318 #ifdef INSN_SCHEDULING
319 /* If we are adding a dependency to INSN's LOG_LINKs, then note that
320 in the bitmap caches of dependency information. */
321 if (true_dependency_cache != NULL)
323 if ((int) dep_type == 0)
324 bitmap_set_bit (&true_dependency_cache[INSN_LUID (insn)], INSN_LUID (elem));
325 else if (dep_type == REG_DEP_ANTI)
326 bitmap_set_bit (&anti_dependency_cache[INSN_LUID (insn)], INSN_LUID (elem));
327 else if (dep_type == REG_DEP_OUTPUT)
328 bitmap_set_bit (&output_dependency_cache[INSN_LUID (insn)], INSN_LUID (elem));
330 #endif
331 return 1;
334 /* A convenience wrapper to operate on an entire list. */
336 static void
337 add_dependence_list (rtx insn, rtx list, enum reg_note dep_type)
339 for (; list; list = XEXP (list, 1))
340 add_dependence (insn, XEXP (list, 0), dep_type);
343 /* Similar, but free *LISTP at the same time. */
345 static void
346 add_dependence_list_and_free (rtx insn, rtx *listp, enum reg_note dep_type)
348 rtx list, next;
349 for (list = *listp, *listp = NULL; list ; list = next)
351 next = XEXP (list, 1);
352 add_dependence (insn, XEXP (list, 0), dep_type);
353 free_INSN_LIST_node (list);
357 /* Set SCHED_GROUP_P and care for the rest of the bookkeeping that
358 goes along with that. */
360 static void
361 set_sched_group_p (rtx insn)
363 rtx prev;
365 SCHED_GROUP_P (insn) = 1;
367 prev = prev_nonnote_insn (insn);
368 add_dependence (insn, prev, REG_DEP_ANTI);
371 /* Process an insn's memory dependencies. There are four kinds of
372 dependencies:
374 (0) read dependence: read follows read
375 (1) true dependence: read follows write
376 (2) anti dependence: write follows read
377 (3) output dependence: write follows write
379 We are careful to build only dependencies which actually exist, and
380 use transitivity to avoid building too many links. */
382 /* Add an INSN and MEM reference pair to a pending INSN_LIST and MEM_LIST.
383 The MEM is a memory reference contained within INSN, which we are saving
384 so that we can do memory aliasing on it. */
386 void
387 add_insn_mem_dependence (struct deps *deps, rtx *insn_list, rtx *mem_list,
388 rtx insn, rtx mem)
390 rtx link;
392 link = alloc_INSN_LIST (insn, *insn_list);
393 *insn_list = link;
395 if (current_sched_info->use_cselib)
397 mem = shallow_copy_rtx (mem);
398 XEXP (mem, 0) = cselib_subst_to_values (XEXP (mem, 0));
400 link = alloc_EXPR_LIST (VOIDmode, canon_rtx (mem), *mem_list);
401 *mem_list = link;
403 deps->pending_lists_length++;
406 /* Make a dependency between every memory reference on the pending lists
407 and INSN, thus flushing the pending lists. FOR_READ is true if emitting
408 dependencies for a read operation, similarly with FOR_WRITE. */
410 static void
411 flush_pending_lists (struct deps *deps, rtx insn, int for_read,
412 int for_write)
414 if (for_write)
416 add_dependence_list_and_free (insn, &deps->pending_read_insns,
417 REG_DEP_ANTI);
418 free_EXPR_LIST_list (&deps->pending_read_mems);
421 add_dependence_list_and_free (insn, &deps->pending_write_insns,
422 for_read ? REG_DEP_ANTI : REG_DEP_OUTPUT);
423 free_EXPR_LIST_list (&deps->pending_write_mems);
424 deps->pending_lists_length = 0;
426 add_dependence_list_and_free (insn, &deps->last_pending_memory_flush,
427 for_read ? REG_DEP_ANTI : REG_DEP_OUTPUT);
428 deps->last_pending_memory_flush = alloc_INSN_LIST (insn, NULL_RTX);
429 deps->pending_flush_length = 1;
432 /* Analyze a single SET, CLOBBER, PRE_DEC, POST_DEC, PRE_INC or POST_INC
433 rtx, X, creating all dependencies generated by the write to the
434 destination of X, and reads of everything mentioned. */
436 static void
437 sched_analyze_1 (struct deps *deps, rtx x, rtx insn)
439 int regno;
440 rtx dest = XEXP (x, 0);
441 enum rtx_code code = GET_CODE (x);
443 if (dest == 0)
444 return;
446 if (GET_CODE (dest) == PARALLEL)
448 int i;
450 for (i = XVECLEN (dest, 0) - 1; i >= 0; i--)
451 if (XEXP (XVECEXP (dest, 0, i), 0) != 0)
452 sched_analyze_1 (deps,
453 gen_rtx_CLOBBER (VOIDmode,
454 XEXP (XVECEXP (dest, 0, i), 0)),
455 insn);
457 if (GET_CODE (x) == SET)
458 sched_analyze_2 (deps, SET_SRC (x), insn);
459 return;
462 while (GET_CODE (dest) == STRICT_LOW_PART || GET_CODE (dest) == SUBREG
463 || GET_CODE (dest) == ZERO_EXTRACT || GET_CODE (dest) == SIGN_EXTRACT)
465 if (GET_CODE (dest) == STRICT_LOW_PART
466 || GET_CODE (dest) == ZERO_EXTRACT
467 || GET_CODE (dest) == SIGN_EXTRACT
468 || read_modify_subreg_p (dest))
470 /* These both read and modify the result. We must handle
471 them as writes to get proper dependencies for following
472 instructions. We must handle them as reads to get proper
473 dependencies from this to previous instructions.
474 Thus we need to call sched_analyze_2. */
476 sched_analyze_2 (deps, XEXP (dest, 0), insn);
478 if (GET_CODE (dest) == ZERO_EXTRACT || GET_CODE (dest) == SIGN_EXTRACT)
480 /* The second and third arguments are values read by this insn. */
481 sched_analyze_2 (deps, XEXP (dest, 1), insn);
482 sched_analyze_2 (deps, XEXP (dest, 2), insn);
484 dest = XEXP (dest, 0);
487 if (REG_P (dest))
489 regno = REGNO (dest);
491 /* A hard reg in a wide mode may really be multiple registers.
492 If so, mark all of them just like the first. */
493 if (regno < FIRST_PSEUDO_REGISTER)
495 int i = hard_regno_nregs[regno][GET_MODE (dest)];
496 if (code == SET)
498 while (--i >= 0)
499 SET_REGNO_REG_SET (reg_pending_sets, regno + i);
501 else
503 while (--i >= 0)
504 SET_REGNO_REG_SET (reg_pending_clobbers, regno + i);
507 /* ??? Reload sometimes emits USEs and CLOBBERs of pseudos that
508 it does not reload. Ignore these as they have served their
509 purpose already. */
510 else if (regno >= deps->max_reg)
512 if (GET_CODE (PATTERN (insn)) != USE
513 && GET_CODE (PATTERN (insn)) != CLOBBER)
514 abort ();
516 else
518 if (code == SET)
519 SET_REGNO_REG_SET (reg_pending_sets, regno);
520 else
521 SET_REGNO_REG_SET (reg_pending_clobbers, regno);
523 /* Pseudos that are REG_EQUIV to something may be replaced
524 by that during reloading. We need only add dependencies for
525 the address in the REG_EQUIV note. */
526 if (!reload_completed && get_reg_known_equiv_p (regno))
528 rtx t = get_reg_known_value (regno);
529 if (MEM_P (t))
530 sched_analyze_2 (deps, XEXP (t, 0), insn);
533 /* Don't let it cross a call after scheduling if it doesn't
534 already cross one. */
535 if (REG_N_CALLS_CROSSED (regno) == 0)
536 add_dependence_list (insn, deps->last_function_call, REG_DEP_ANTI);
539 else if (MEM_P (dest))
541 /* Writing memory. */
542 rtx t = dest;
544 if (current_sched_info->use_cselib)
546 t = shallow_copy_rtx (dest);
547 cselib_lookup (XEXP (t, 0), Pmode, 1);
548 XEXP (t, 0) = cselib_subst_to_values (XEXP (t, 0));
550 t = canon_rtx (t);
552 if (deps->pending_lists_length > MAX_PENDING_LIST_LENGTH)
554 /* Flush all pending reads and writes to prevent the pending lists
555 from getting any larger. Insn scheduling runs too slowly when
556 these lists get long. When compiling GCC with itself,
557 this flush occurs 8 times for sparc, and 10 times for m88k using
558 the default value of 32. */
559 flush_pending_lists (deps, insn, false, true);
561 else
563 rtx pending, pending_mem;
565 pending = deps->pending_read_insns;
566 pending_mem = deps->pending_read_mems;
567 while (pending)
569 if (anti_dependence (XEXP (pending_mem, 0), t))
570 add_dependence (insn, XEXP (pending, 0), REG_DEP_ANTI);
572 pending = XEXP (pending, 1);
573 pending_mem = XEXP (pending_mem, 1);
576 pending = deps->pending_write_insns;
577 pending_mem = deps->pending_write_mems;
578 while (pending)
580 if (output_dependence (XEXP (pending_mem, 0), t))
581 add_dependence (insn, XEXP (pending, 0), REG_DEP_OUTPUT);
583 pending = XEXP (pending, 1);
584 pending_mem = XEXP (pending_mem, 1);
587 add_dependence_list (insn, deps->last_pending_memory_flush,
588 REG_DEP_ANTI);
590 add_insn_mem_dependence (deps, &deps->pending_write_insns,
591 &deps->pending_write_mems, insn, dest);
593 sched_analyze_2 (deps, XEXP (dest, 0), insn);
596 /* Analyze reads. */
597 if (GET_CODE (x) == SET)
598 sched_analyze_2 (deps, SET_SRC (x), insn);
601 /* Analyze the uses of memory and registers in rtx X in INSN. */
603 static void
604 sched_analyze_2 (struct deps *deps, rtx x, rtx insn)
606 int i;
607 int j;
608 enum rtx_code code;
609 const char *fmt;
611 if (x == 0)
612 return;
614 code = GET_CODE (x);
616 switch (code)
618 case CONST_INT:
619 case CONST_DOUBLE:
620 case CONST_VECTOR:
621 case SYMBOL_REF:
622 case CONST:
623 case LABEL_REF:
624 /* Ignore constants. Note that we must handle CONST_DOUBLE here
625 because it may have a cc0_rtx in its CONST_DOUBLE_CHAIN field, but
626 this does not mean that this insn is using cc0. */
627 return;
629 #ifdef HAVE_cc0
630 case CC0:
631 /* User of CC0 depends on immediately preceding insn. */
632 set_sched_group_p (insn);
633 /* Don't move CC0 setter to another block (it can set up the
634 same flag for previous CC0 users which is safe). */
635 CANT_MOVE (prev_nonnote_insn (insn)) = 1;
636 return;
637 #endif
639 case REG:
641 int regno = REGNO (x);
642 if (regno < FIRST_PSEUDO_REGISTER)
644 int i = hard_regno_nregs[regno][GET_MODE (x)];
645 while (--i >= 0)
646 SET_REGNO_REG_SET (reg_pending_uses, regno + i);
648 /* ??? Reload sometimes emits USEs and CLOBBERs of pseudos that
649 it does not reload. Ignore these as they have served their
650 purpose already. */
651 else if (regno >= deps->max_reg)
653 if (GET_CODE (PATTERN (insn)) != USE
654 && GET_CODE (PATTERN (insn)) != CLOBBER)
655 abort ();
657 else
659 SET_REGNO_REG_SET (reg_pending_uses, regno);
661 /* Pseudos that are REG_EQUIV to something may be replaced
662 by that during reloading. We need only add dependencies for
663 the address in the REG_EQUIV note. */
664 if (!reload_completed && get_reg_known_equiv_p (regno))
666 rtx t = get_reg_known_value (regno);
667 if (MEM_P (t))
668 sched_analyze_2 (deps, XEXP (t, 0), insn);
671 /* If the register does not already cross any calls, then add this
672 insn to the sched_before_next_call list so that it will still
673 not cross calls after scheduling. */
674 if (REG_N_CALLS_CROSSED (regno) == 0)
675 deps->sched_before_next_call
676 = alloc_INSN_LIST (insn, deps->sched_before_next_call);
678 return;
681 case MEM:
683 /* Reading memory. */
684 rtx u;
685 rtx pending, pending_mem;
686 rtx t = x;
688 if (current_sched_info->use_cselib)
690 t = shallow_copy_rtx (t);
691 cselib_lookup (XEXP (t, 0), Pmode, 1);
692 XEXP (t, 0) = cselib_subst_to_values (XEXP (t, 0));
694 t = canon_rtx (t);
695 pending = deps->pending_read_insns;
696 pending_mem = deps->pending_read_mems;
697 while (pending)
699 if (read_dependence (XEXP (pending_mem, 0), t))
700 add_dependence (insn, XEXP (pending, 0), REG_DEP_ANTI);
702 pending = XEXP (pending, 1);
703 pending_mem = XEXP (pending_mem, 1);
706 pending = deps->pending_write_insns;
707 pending_mem = deps->pending_write_mems;
708 while (pending)
710 if (true_dependence (XEXP (pending_mem, 0), VOIDmode,
711 t, rtx_varies_p))
712 add_dependence (insn, XEXP (pending, 0), 0);
714 pending = XEXP (pending, 1);
715 pending_mem = XEXP (pending_mem, 1);
718 for (u = deps->last_pending_memory_flush; u; u = XEXP (u, 1))
719 if (!JUMP_P (XEXP (u, 0))
720 || deps_may_trap_p (x))
721 add_dependence (insn, XEXP (u, 0), REG_DEP_ANTI);
723 /* Always add these dependencies to pending_reads, since
724 this insn may be followed by a write. */
725 add_insn_mem_dependence (deps, &deps->pending_read_insns,
726 &deps->pending_read_mems, insn, x);
728 /* Take advantage of tail recursion here. */
729 sched_analyze_2 (deps, XEXP (x, 0), insn);
730 return;
733 /* Force pending stores to memory in case a trap handler needs them. */
734 case TRAP_IF:
735 flush_pending_lists (deps, insn, true, false);
736 break;
738 case ASM_OPERANDS:
739 case ASM_INPUT:
740 case UNSPEC_VOLATILE:
742 /* Traditional and volatile asm instructions must be considered to use
743 and clobber all hard registers, all pseudo-registers and all of
744 memory. So must TRAP_IF and UNSPEC_VOLATILE operations.
746 Consider for instance a volatile asm that changes the fpu rounding
747 mode. An insn should not be moved across this even if it only uses
748 pseudo-regs because it might give an incorrectly rounded result. */
749 if (code != ASM_OPERANDS || MEM_VOLATILE_P (x))
750 reg_pending_barrier = TRUE_BARRIER;
752 /* For all ASM_OPERANDS, we must traverse the vector of input operands.
753 We can not just fall through here since then we would be confused
754 by the ASM_INPUT rtx inside ASM_OPERANDS, which do not indicate
755 traditional asms unlike their normal usage. */
757 if (code == ASM_OPERANDS)
759 for (j = 0; j < ASM_OPERANDS_INPUT_LENGTH (x); j++)
760 sched_analyze_2 (deps, ASM_OPERANDS_INPUT (x, j), insn);
761 return;
763 break;
766 case PRE_DEC:
767 case POST_DEC:
768 case PRE_INC:
769 case POST_INC:
770 /* These both read and modify the result. We must handle them as writes
771 to get proper dependencies for following instructions. We must handle
772 them as reads to get proper dependencies from this to previous
773 instructions. Thus we need to pass them to both sched_analyze_1
774 and sched_analyze_2. We must call sched_analyze_2 first in order
775 to get the proper antecedent for the read. */
776 sched_analyze_2 (deps, XEXP (x, 0), insn);
777 sched_analyze_1 (deps, x, insn);
778 return;
780 case POST_MODIFY:
781 case PRE_MODIFY:
782 /* op0 = op0 + op1 */
783 sched_analyze_2 (deps, XEXP (x, 0), insn);
784 sched_analyze_2 (deps, XEXP (x, 1), insn);
785 sched_analyze_1 (deps, x, insn);
786 return;
788 default:
789 break;
792 /* Other cases: walk the insn. */
793 fmt = GET_RTX_FORMAT (code);
794 for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
796 if (fmt[i] == 'e')
797 sched_analyze_2 (deps, XEXP (x, i), insn);
798 else if (fmt[i] == 'E')
799 for (j = 0; j < XVECLEN (x, i); j++)
800 sched_analyze_2 (deps, XVECEXP (x, i, j), insn);
804 /* Analyze an INSN with pattern X to find all dependencies. */
806 static void
807 sched_analyze_insn (struct deps *deps, rtx x, rtx insn, rtx loop_notes)
809 RTX_CODE code = GET_CODE (x);
810 rtx link;
811 int i;
813 if (code == COND_EXEC)
815 sched_analyze_2 (deps, COND_EXEC_TEST (x), insn);
817 /* ??? Should be recording conditions so we reduce the number of
818 false dependencies. */
819 x = COND_EXEC_CODE (x);
820 code = GET_CODE (x);
822 if (code == SET || code == CLOBBER)
824 sched_analyze_1 (deps, x, insn);
826 /* Bare clobber insns are used for letting life analysis, reg-stack
827 and others know that a value is dead. Depend on the last call
828 instruction so that reg-stack won't get confused. */
829 if (code == CLOBBER)
830 add_dependence_list (insn, deps->last_function_call, REG_DEP_OUTPUT);
832 else if (code == PARALLEL)
834 int i;
835 for (i = XVECLEN (x, 0) - 1; i >= 0; i--)
837 rtx sub = XVECEXP (x, 0, i);
838 code = GET_CODE (sub);
840 if (code == COND_EXEC)
842 sched_analyze_2 (deps, COND_EXEC_TEST (sub), insn);
843 sub = COND_EXEC_CODE (sub);
844 code = GET_CODE (sub);
846 if (code == SET || code == CLOBBER)
847 sched_analyze_1 (deps, sub, insn);
848 else
849 sched_analyze_2 (deps, sub, insn);
852 else
853 sched_analyze_2 (deps, x, insn);
855 /* Mark registers CLOBBERED or used by called function. */
856 if (CALL_P (insn))
858 for (link = CALL_INSN_FUNCTION_USAGE (insn); link; link = XEXP (link, 1))
860 if (GET_CODE (XEXP (link, 0)) == CLOBBER)
861 sched_analyze_1 (deps, XEXP (link, 0), insn);
862 else
863 sched_analyze_2 (deps, XEXP (link, 0), insn);
865 if (find_reg_note (insn, REG_SETJMP, NULL))
866 reg_pending_barrier = MOVE_BARRIER;
869 if (JUMP_P (insn))
871 rtx next;
872 next = next_nonnote_insn (insn);
873 if (next && BARRIER_P (next))
874 reg_pending_barrier = TRUE_BARRIER;
875 else
877 rtx pending, pending_mem;
878 regset_head tmp_uses, tmp_sets;
879 INIT_REG_SET (&tmp_uses);
880 INIT_REG_SET (&tmp_sets);
882 (*current_sched_info->compute_jump_reg_dependencies)
883 (insn, &deps->reg_conditional_sets, &tmp_uses, &tmp_sets);
884 /* Make latency of jump equal to 0 by using anti-dependence. */
885 EXECUTE_IF_SET_IN_REG_SET (&tmp_uses, 0, i,
887 struct deps_reg *reg_last = &deps->reg_last[i];
888 add_dependence_list (insn, reg_last->sets, REG_DEP_ANTI);
889 add_dependence_list (insn, reg_last->clobbers, REG_DEP_ANTI);
890 reg_last->uses_length++;
891 reg_last->uses = alloc_INSN_LIST (insn, reg_last->uses);
893 IOR_REG_SET (reg_pending_sets, &tmp_sets);
895 CLEAR_REG_SET (&tmp_uses);
896 CLEAR_REG_SET (&tmp_sets);
898 /* All memory writes and volatile reads must happen before the
899 jump. Non-volatile reads must happen before the jump iff
900 the result is needed by the above register used mask. */
902 pending = deps->pending_write_insns;
903 pending_mem = deps->pending_write_mems;
904 while (pending)
906 add_dependence (insn, XEXP (pending, 0), REG_DEP_OUTPUT);
907 pending = XEXP (pending, 1);
908 pending_mem = XEXP (pending_mem, 1);
911 pending = deps->pending_read_insns;
912 pending_mem = deps->pending_read_mems;
913 while (pending)
915 if (MEM_VOLATILE_P (XEXP (pending_mem, 0)))
916 add_dependence (insn, XEXP (pending, 0), REG_DEP_OUTPUT);
917 pending = XEXP (pending, 1);
918 pending_mem = XEXP (pending_mem, 1);
921 add_dependence_list (insn, deps->last_pending_memory_flush,
922 REG_DEP_ANTI);
926 /* If there is a {LOOP,EHREGION}_{BEG,END} note in the middle of a basic
927 block, then we must be sure that no instructions are scheduled across it.
928 Otherwise, the reg_n_refs info (which depends on loop_depth) would
929 become incorrect. */
930 if (loop_notes)
932 rtx link;
934 /* Update loop_notes with any notes from this insn. Also determine
935 if any of the notes on the list correspond to instruction scheduling
936 barriers (loop, eh & setjmp notes, but not range notes). */
937 link = loop_notes;
938 while (XEXP (link, 1))
940 if (INTVAL (XEXP (link, 0)) == NOTE_INSN_LOOP_BEG
941 || INTVAL (XEXP (link, 0)) == NOTE_INSN_LOOP_END
942 || INTVAL (XEXP (link, 0)) == NOTE_INSN_EH_REGION_BEG
943 || INTVAL (XEXP (link, 0)) == NOTE_INSN_EH_REGION_END)
944 reg_pending_barrier = MOVE_BARRIER;
946 link = XEXP (link, 1);
948 XEXP (link, 1) = REG_NOTES (insn);
949 REG_NOTES (insn) = loop_notes;
952 /* If this instruction can throw an exception, then moving it changes
953 where block boundaries fall. This is mighty confusing elsewhere.
954 Therefore, prevent such an instruction from being moved. */
955 if (can_throw_internal (insn))
956 reg_pending_barrier = MOVE_BARRIER;
958 /* Add dependencies if a scheduling barrier was found. */
959 if (reg_pending_barrier)
961 /* In the case of barrier the most added dependencies are not
962 real, so we use anti-dependence here. */
963 if (GET_CODE (PATTERN (insn)) == COND_EXEC)
965 EXECUTE_IF_SET_IN_REG_SET (&deps->reg_last_in_use, 0, i,
967 struct deps_reg *reg_last = &deps->reg_last[i];
968 add_dependence_list (insn, reg_last->uses, REG_DEP_ANTI);
969 add_dependence_list
970 (insn, reg_last->sets,
971 reg_pending_barrier == TRUE_BARRIER ? 0 : REG_DEP_ANTI);
972 add_dependence_list
973 (insn, reg_last->clobbers,
974 reg_pending_barrier == TRUE_BARRIER ? 0 : REG_DEP_ANTI);
977 else
979 EXECUTE_IF_SET_IN_REG_SET (&deps->reg_last_in_use, 0, i,
981 struct deps_reg *reg_last = &deps->reg_last[i];
982 add_dependence_list_and_free (insn, &reg_last->uses,
983 REG_DEP_ANTI);
984 add_dependence_list_and_free
985 (insn, &reg_last->sets,
986 reg_pending_barrier == TRUE_BARRIER ? 0 : REG_DEP_ANTI);
987 add_dependence_list_and_free
988 (insn, &reg_last->clobbers,
989 reg_pending_barrier == TRUE_BARRIER ? 0 : REG_DEP_ANTI);
990 reg_last->uses_length = 0;
991 reg_last->clobbers_length = 0;
995 for (i = 0; i < deps->max_reg; i++)
997 struct deps_reg *reg_last = &deps->reg_last[i];
998 reg_last->sets = alloc_INSN_LIST (insn, reg_last->sets);
999 SET_REGNO_REG_SET (&deps->reg_last_in_use, i);
1002 flush_pending_lists (deps, insn, true, true);
1003 CLEAR_REG_SET (&deps->reg_conditional_sets);
1004 reg_pending_barrier = NOT_A_BARRIER;
1006 else
1008 /* If the current insn is conditional, we can't free any
1009 of the lists. */
1010 if (GET_CODE (PATTERN (insn)) == COND_EXEC)
1012 EXECUTE_IF_SET_IN_REG_SET (reg_pending_uses, 0, i,
1014 struct deps_reg *reg_last = &deps->reg_last[i];
1015 add_dependence_list (insn, reg_last->sets, 0);
1016 add_dependence_list (insn, reg_last->clobbers, 0);
1017 reg_last->uses = alloc_INSN_LIST (insn, reg_last->uses);
1018 reg_last->uses_length++;
1020 EXECUTE_IF_SET_IN_REG_SET (reg_pending_clobbers, 0, i,
1022 struct deps_reg *reg_last = &deps->reg_last[i];
1023 add_dependence_list (insn, reg_last->sets, REG_DEP_OUTPUT);
1024 add_dependence_list (insn, reg_last->uses, REG_DEP_ANTI);
1025 reg_last->clobbers = alloc_INSN_LIST (insn, reg_last->clobbers);
1026 reg_last->clobbers_length++;
1028 EXECUTE_IF_SET_IN_REG_SET (reg_pending_sets, 0, i,
1030 struct deps_reg *reg_last = &deps->reg_last[i];
1031 add_dependence_list (insn, reg_last->sets, REG_DEP_OUTPUT);
1032 add_dependence_list (insn, reg_last->clobbers, REG_DEP_OUTPUT);
1033 add_dependence_list (insn, reg_last->uses, REG_DEP_ANTI);
1034 reg_last->sets = alloc_INSN_LIST (insn, reg_last->sets);
1035 SET_REGNO_REG_SET (&deps->reg_conditional_sets, i);
1038 else
1040 EXECUTE_IF_SET_IN_REG_SET (reg_pending_uses, 0, i,
1042 struct deps_reg *reg_last = &deps->reg_last[i];
1043 add_dependence_list (insn, reg_last->sets, 0);
1044 add_dependence_list (insn, reg_last->clobbers, 0);
1045 reg_last->uses_length++;
1046 reg_last->uses = alloc_INSN_LIST (insn, reg_last->uses);
1048 EXECUTE_IF_SET_IN_REG_SET (reg_pending_clobbers, 0, i,
1050 struct deps_reg *reg_last = &deps->reg_last[i];
1051 if (reg_last->uses_length > MAX_PENDING_LIST_LENGTH
1052 || reg_last->clobbers_length > MAX_PENDING_LIST_LENGTH)
1054 add_dependence_list_and_free (insn, &reg_last->sets,
1055 REG_DEP_OUTPUT);
1056 add_dependence_list_and_free (insn, &reg_last->uses,
1057 REG_DEP_ANTI);
1058 add_dependence_list_and_free (insn, &reg_last->clobbers,
1059 REG_DEP_OUTPUT);
1060 reg_last->sets = alloc_INSN_LIST (insn, reg_last->sets);
1061 reg_last->clobbers_length = 0;
1062 reg_last->uses_length = 0;
1064 else
1066 add_dependence_list (insn, reg_last->sets, REG_DEP_OUTPUT);
1067 add_dependence_list (insn, reg_last->uses, REG_DEP_ANTI);
1069 reg_last->clobbers_length++;
1070 reg_last->clobbers = alloc_INSN_LIST (insn, reg_last->clobbers);
1072 EXECUTE_IF_SET_IN_REG_SET (reg_pending_sets, 0, i,
1074 struct deps_reg *reg_last = &deps->reg_last[i];
1075 add_dependence_list_and_free (insn, &reg_last->sets,
1076 REG_DEP_OUTPUT);
1077 add_dependence_list_and_free (insn, &reg_last->clobbers,
1078 REG_DEP_OUTPUT);
1079 add_dependence_list_and_free (insn, &reg_last->uses,
1080 REG_DEP_ANTI);
1081 reg_last->sets = alloc_INSN_LIST (insn, reg_last->sets);
1082 reg_last->uses_length = 0;
1083 reg_last->clobbers_length = 0;
1084 CLEAR_REGNO_REG_SET (&deps->reg_conditional_sets, i);
1088 IOR_REG_SET (&deps->reg_last_in_use, reg_pending_uses);
1089 IOR_REG_SET (&deps->reg_last_in_use, reg_pending_clobbers);
1090 IOR_REG_SET (&deps->reg_last_in_use, reg_pending_sets);
1092 CLEAR_REG_SET (reg_pending_uses);
1093 CLEAR_REG_SET (reg_pending_clobbers);
1094 CLEAR_REG_SET (reg_pending_sets);
1096 /* If we are currently in a libcall scheduling group, then mark the
1097 current insn as being in a scheduling group and that it can not
1098 be moved into a different basic block. */
1100 if (deps->libcall_block_tail_insn)
1102 set_sched_group_p (insn);
1103 CANT_MOVE (insn) = 1;
1106 /* If a post-call group is still open, see if it should remain so.
1107 This insn must be a simple move of a hard reg to a pseudo or
1108 vice-versa.
1110 We must avoid moving these insns for correctness on
1111 SMALL_REGISTER_CLASS machines, and for special registers like
1112 PIC_OFFSET_TABLE_REGNUM. For simplicity, extend this to all
1113 hard regs for all targets. */
1115 if (deps->in_post_call_group_p)
1117 rtx tmp, set = single_set (insn);
1118 int src_regno, dest_regno;
1120 if (set == NULL)
1121 goto end_call_group;
1123 tmp = SET_DEST (set);
1124 if (GET_CODE (tmp) == SUBREG)
1125 tmp = SUBREG_REG (tmp);
1126 if (REG_P (tmp))
1127 dest_regno = REGNO (tmp);
1128 else
1129 goto end_call_group;
1131 tmp = SET_SRC (set);
1132 if (GET_CODE (tmp) == SUBREG)
1133 tmp = SUBREG_REG (tmp);
1134 if ((GET_CODE (tmp) == PLUS
1135 || GET_CODE (tmp) == MINUS)
1136 && REG_P (XEXP (tmp, 0))
1137 && REGNO (XEXP (tmp, 0)) == STACK_POINTER_REGNUM
1138 && dest_regno == STACK_POINTER_REGNUM)
1139 src_regno = STACK_POINTER_REGNUM;
1140 else if (REG_P (tmp))
1141 src_regno = REGNO (tmp);
1142 else
1143 goto end_call_group;
1145 if (src_regno < FIRST_PSEUDO_REGISTER
1146 || dest_regno < FIRST_PSEUDO_REGISTER)
1148 /* If we are inside a post-call group right at the start of the
1149 scheduling region, we must not add a dependency. */
1150 if (deps->in_post_call_group_p == post_call_initial)
1152 SCHED_GROUP_P (insn) = 1;
1153 deps->in_post_call_group_p = post_call;
1155 else
1156 set_sched_group_p (insn);
1157 CANT_MOVE (insn) = 1;
1159 else
1161 end_call_group:
1162 deps->in_post_call_group_p = not_post_call;
1167 /* Analyze every insn between HEAD and TAIL inclusive, creating LOG_LINKS
1168 for every dependency. */
1170 void
1171 sched_analyze (struct deps *deps, rtx head, rtx tail)
1173 rtx insn;
1174 rtx loop_notes = 0;
1176 if (current_sched_info->use_cselib)
1177 cselib_init (true);
1179 /* Before reload, if the previous block ended in a call, show that
1180 we are inside a post-call group, so as to keep the lifetimes of
1181 hard registers correct. */
1182 if (! reload_completed && !LABEL_P (head))
1184 insn = prev_nonnote_insn (head);
1185 if (insn && CALL_P (insn))
1186 deps->in_post_call_group_p = post_call_initial;
1188 for (insn = head;; insn = NEXT_INSN (insn))
1190 rtx link, end_seq, r0, set;
1192 if (NONJUMP_INSN_P (insn) || JUMP_P (insn))
1194 /* Clear out the stale LOG_LINKS from flow. */
1195 free_INSN_LIST_list (&LOG_LINKS (insn));
1197 /* Make each JUMP_INSN a scheduling barrier for memory
1198 references. */
1199 if (JUMP_P (insn))
1201 /* Keep the list a reasonable size. */
1202 if (deps->pending_flush_length++ > MAX_PENDING_LIST_LENGTH)
1203 flush_pending_lists (deps, insn, true, true);
1204 else
1205 deps->last_pending_memory_flush
1206 = alloc_INSN_LIST (insn, deps->last_pending_memory_flush);
1208 sched_analyze_insn (deps, PATTERN (insn), insn, loop_notes);
1209 loop_notes = 0;
1211 else if (CALL_P (insn))
1213 int i;
1215 CANT_MOVE (insn) = 1;
1217 /* Clear out the stale LOG_LINKS from flow. */
1218 free_INSN_LIST_list (&LOG_LINKS (insn));
1220 if (find_reg_note (insn, REG_SETJMP, NULL))
1222 /* This is setjmp. Assume that all registers, not just
1223 hard registers, may be clobbered by this call. */
1224 reg_pending_barrier = MOVE_BARRIER;
1226 else
1228 for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
1229 /* A call may read and modify global register variables. */
1230 if (global_regs[i])
1232 SET_REGNO_REG_SET (reg_pending_sets, i);
1233 SET_REGNO_REG_SET (reg_pending_uses, i);
1235 /* Other call-clobbered hard regs may be clobbered.
1236 Since we only have a choice between 'might be clobbered'
1237 and 'definitely not clobbered', we must include all
1238 partly call-clobbered registers here. */
1239 else if (HARD_REGNO_CALL_PART_CLOBBERED (i, reg_raw_mode[i])
1240 || TEST_HARD_REG_BIT (regs_invalidated_by_call, i))
1241 SET_REGNO_REG_SET (reg_pending_clobbers, i);
1242 /* We don't know what set of fixed registers might be used
1243 by the function, but it is certain that the stack pointer
1244 is among them, but be conservative. */
1245 else if (fixed_regs[i])
1246 SET_REGNO_REG_SET (reg_pending_uses, i);
1247 /* The frame pointer is normally not used by the function
1248 itself, but by the debugger. */
1249 /* ??? MIPS o32 is an exception. It uses the frame pointer
1250 in the macro expansion of jal but does not represent this
1251 fact in the call_insn rtl. */
1252 else if (i == FRAME_POINTER_REGNUM
1253 || (i == HARD_FRAME_POINTER_REGNUM
1254 && (! reload_completed || frame_pointer_needed)))
1255 SET_REGNO_REG_SET (reg_pending_uses, i);
1258 /* For each insn which shouldn't cross a call, add a dependence
1259 between that insn and this call insn. */
1260 add_dependence_list_and_free (insn, &deps->sched_before_next_call,
1261 REG_DEP_ANTI);
1263 sched_analyze_insn (deps, PATTERN (insn), insn, loop_notes);
1264 loop_notes = 0;
1266 /* In the absence of interprocedural alias analysis, we must flush
1267 all pending reads and writes, and start new dependencies starting
1268 from here. But only flush writes for constant calls (which may
1269 be passed a pointer to something we haven't written yet). */
1270 flush_pending_lists (deps, insn, true, !CONST_OR_PURE_CALL_P (insn));
1272 /* Remember the last function call for limiting lifetimes. */
1273 free_INSN_LIST_list (&deps->last_function_call);
1274 deps->last_function_call = alloc_INSN_LIST (insn, NULL_RTX);
1276 /* Before reload, begin a post-call group, so as to keep the
1277 lifetimes of hard registers correct. */
1278 if (! reload_completed)
1279 deps->in_post_call_group_p = post_call;
1282 /* See comments on reemit_notes as to why we do this.
1283 ??? Actually, the reemit_notes just say what is done, not why. */
1285 if (NOTE_P (insn)
1286 && (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG
1287 || NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END
1288 || NOTE_LINE_NUMBER (insn) == NOTE_INSN_EH_REGION_BEG
1289 || NOTE_LINE_NUMBER (insn) == NOTE_INSN_EH_REGION_END))
1291 rtx rtx_region;
1293 if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_EH_REGION_BEG
1294 || NOTE_LINE_NUMBER (insn) == NOTE_INSN_EH_REGION_END)
1295 rtx_region = GEN_INT (NOTE_EH_HANDLER (insn));
1296 else
1297 rtx_region = const0_rtx;
1299 loop_notes = alloc_EXPR_LIST (REG_SAVE_NOTE,
1300 rtx_region,
1301 loop_notes);
1302 loop_notes = alloc_EXPR_LIST (REG_SAVE_NOTE,
1303 GEN_INT (NOTE_LINE_NUMBER (insn)),
1304 loop_notes);
1305 CONST_OR_PURE_CALL_P (loop_notes) = CONST_OR_PURE_CALL_P (insn);
1308 if (current_sched_info->use_cselib)
1309 cselib_process_insn (insn);
1311 /* Now that we have completed handling INSN, check and see if it is
1312 a CLOBBER beginning a libcall block. If it is, record the
1313 end of the libcall sequence.
1315 We want to schedule libcall blocks as a unit before reload. While
1316 this restricts scheduling, it preserves the meaning of a libcall
1317 block.
1319 As a side effect, we may get better code due to decreased register
1320 pressure as well as less chance of a foreign insn appearing in
1321 a libcall block. */
1322 if (!reload_completed
1323 /* Note we may have nested libcall sequences. We only care about
1324 the outermost libcall sequence. */
1325 && deps->libcall_block_tail_insn == 0
1326 /* The sequence must start with a clobber of a register. */
1327 && NONJUMP_INSN_P (insn)
1328 && GET_CODE (PATTERN (insn)) == CLOBBER
1329 && (r0 = XEXP (PATTERN (insn), 0), REG_P (r0))
1330 && REG_P (XEXP (PATTERN (insn), 0))
1331 /* The CLOBBER must also have a REG_LIBCALL note attached. */
1332 && (link = find_reg_note (insn, REG_LIBCALL, NULL_RTX)) != 0
1333 && (end_seq = XEXP (link, 0)) != 0
1334 /* The insn referenced by the REG_LIBCALL note must be a
1335 simple nop copy with the same destination as the register
1336 mentioned in the clobber. */
1337 && (set = single_set (end_seq)) != 0
1338 && SET_DEST (set) == r0 && SET_SRC (set) == r0
1339 /* And finally the insn referenced by the REG_LIBCALL must
1340 also contain a REG_EQUAL note and a REG_RETVAL note. */
1341 && find_reg_note (end_seq, REG_EQUAL, NULL_RTX) != 0
1342 && find_reg_note (end_seq, REG_RETVAL, NULL_RTX) != 0)
1343 deps->libcall_block_tail_insn = XEXP (link, 0);
1345 /* If we have reached the end of a libcall block, then close the
1346 block. */
1347 if (deps->libcall_block_tail_insn == insn)
1348 deps->libcall_block_tail_insn = 0;
1350 if (insn == tail)
1352 if (current_sched_info->use_cselib)
1353 cselib_finish ();
1354 return;
1357 abort ();
1361 /* The following function adds forward dependence (FROM, TO) with
1362 given DEP_TYPE. The forward dependence should be not exist before. */
1364 void
1365 add_forward_dependence (rtx from, rtx to, enum reg_note dep_type)
1367 rtx new_link;
1369 #ifdef ENABLE_CHECKING
1370 /* If add_dependence is working properly there should never
1371 be notes, deleted insns or duplicates in the backward
1372 links. Thus we need not check for them here.
1374 However, if we have enabled checking we might as well go
1375 ahead and verify that add_dependence worked properly. */
1376 if (NOTE_P (from)
1377 || INSN_DELETED_P (from)
1378 || (forward_dependency_cache != NULL
1379 && bitmap_bit_p (&forward_dependency_cache[INSN_LUID (from)],
1380 INSN_LUID (to)))
1381 || (forward_dependency_cache == NULL
1382 && find_insn_list (to, INSN_DEPEND (from))))
1383 abort ();
1384 if (forward_dependency_cache != NULL)
1385 bitmap_bit_p (&forward_dependency_cache[INSN_LUID (from)],
1386 INSN_LUID (to));
1387 #endif
1389 new_link = alloc_INSN_LIST (to, INSN_DEPEND (from));
1391 PUT_REG_NOTE_KIND (new_link, dep_type);
1393 INSN_DEPEND (from) = new_link;
1394 INSN_DEP_COUNT (to) += 1;
1397 /* Examine insns in the range [ HEAD, TAIL ] and Use the backward
1398 dependences from LOG_LINKS to build forward dependences in
1399 INSN_DEPEND. */
1401 void
1402 compute_forward_dependences (rtx head, rtx tail)
1404 rtx insn, link;
1405 rtx next_tail;
1407 next_tail = NEXT_INSN (tail);
1408 for (insn = head; insn != next_tail; insn = NEXT_INSN (insn))
1410 if (! INSN_P (insn))
1411 continue;
1413 for (link = LOG_LINKS (insn); link; link = XEXP (link, 1))
1414 add_forward_dependence (XEXP (link, 0), insn, REG_NOTE_KIND (link));
1418 /* Initialize variables for region data dependence analysis.
1419 n_bbs is the number of region blocks. */
1421 void
1422 init_deps (struct deps *deps)
1424 int max_reg = (reload_completed ? FIRST_PSEUDO_REGISTER : max_reg_num ());
1426 deps->max_reg = max_reg;
1427 deps->reg_last = xcalloc (max_reg, sizeof (struct deps_reg));
1428 INIT_REG_SET (&deps->reg_last_in_use);
1429 INIT_REG_SET (&deps->reg_conditional_sets);
1431 deps->pending_read_insns = 0;
1432 deps->pending_read_mems = 0;
1433 deps->pending_write_insns = 0;
1434 deps->pending_write_mems = 0;
1435 deps->pending_lists_length = 0;
1436 deps->pending_flush_length = 0;
1437 deps->last_pending_memory_flush = 0;
1438 deps->last_function_call = 0;
1439 deps->sched_before_next_call = 0;
1440 deps->in_post_call_group_p = not_post_call;
1441 deps->libcall_block_tail_insn = 0;
1444 /* Free insn lists found in DEPS. */
1446 void
1447 free_deps (struct deps *deps)
1449 int i;
1451 free_INSN_LIST_list (&deps->pending_read_insns);
1452 free_EXPR_LIST_list (&deps->pending_read_mems);
1453 free_INSN_LIST_list (&deps->pending_write_insns);
1454 free_EXPR_LIST_list (&deps->pending_write_mems);
1455 free_INSN_LIST_list (&deps->last_pending_memory_flush);
1457 /* Without the EXECUTE_IF_SET, this loop is executed max_reg * nr_regions
1458 times. For a testcase with 42000 regs and 8000 small basic blocks,
1459 this loop accounted for nearly 60% (84 sec) of the total -O2 runtime. */
1460 EXECUTE_IF_SET_IN_REG_SET (&deps->reg_last_in_use, 0, i,
1462 struct deps_reg *reg_last = &deps->reg_last[i];
1463 if (reg_last->uses)
1464 free_INSN_LIST_list (&reg_last->uses);
1465 if (reg_last->sets)
1466 free_INSN_LIST_list (&reg_last->sets);
1467 if (reg_last->clobbers)
1468 free_INSN_LIST_list (&reg_last->clobbers);
1470 CLEAR_REG_SET (&deps->reg_last_in_use);
1471 CLEAR_REG_SET (&deps->reg_conditional_sets);
1473 free (deps->reg_last);
1476 /* If it is profitable to use them, initialize caches for tracking
1477 dependency information. LUID is the number of insns to be scheduled,
1478 it is used in the estimate of profitability. */
1480 void
1481 init_dependency_caches (int luid)
1483 /* ?!? We could save some memory by computing a per-region luid mapping
1484 which could reduce both the number of vectors in the cache and the size
1485 of each vector. Instead we just avoid the cache entirely unless the
1486 average number of instructions in a basic block is very high. See
1487 the comment before the declaration of true_dependency_cache for
1488 what we consider "very high". */
1489 if (luid / n_basic_blocks > 100 * 5)
1491 int i;
1492 true_dependency_cache = xmalloc (luid * sizeof (bitmap_head));
1493 anti_dependency_cache = xmalloc (luid * sizeof (bitmap_head));
1494 output_dependency_cache = xmalloc (luid * sizeof (bitmap_head));
1495 #ifdef ENABLE_CHECKING
1496 forward_dependency_cache = xmalloc (luid * sizeof (bitmap_head));
1497 #endif
1498 for (i = 0; i < luid; i++)
1500 bitmap_initialize (&true_dependency_cache[i], 0);
1501 bitmap_initialize (&anti_dependency_cache[i], 0);
1502 bitmap_initialize (&output_dependency_cache[i], 0);
1503 #ifdef ENABLE_CHECKING
1504 bitmap_initialize (&forward_dependency_cache[i], 0);
1505 #endif
1507 cache_size = luid;
1511 /* Free the caches allocated in init_dependency_caches. */
1513 void
1514 free_dependency_caches (void)
1516 if (true_dependency_cache)
1518 int i;
1520 for (i = 0; i < cache_size; i++)
1522 bitmap_clear (&true_dependency_cache[i]);
1523 bitmap_clear (&anti_dependency_cache[i]);
1524 bitmap_clear (&output_dependency_cache[i]);
1525 #ifdef ENABLE_CHECKING
1526 bitmap_clear (&forward_dependency_cache[i]);
1527 #endif
1529 free (true_dependency_cache);
1530 true_dependency_cache = NULL;
1531 free (anti_dependency_cache);
1532 anti_dependency_cache = NULL;
1533 free (output_dependency_cache);
1534 output_dependency_cache = NULL;
1535 #ifdef ENABLE_CHECKING
1536 free (forward_dependency_cache);
1537 forward_dependency_cache = NULL;
1538 #endif
1542 /* Initialize some global variables needed by the dependency analysis
1543 code. */
1545 void
1546 init_deps_global (void)
1548 reg_pending_sets = INITIALIZE_REG_SET (reg_pending_sets_head);
1549 reg_pending_clobbers = INITIALIZE_REG_SET (reg_pending_clobbers_head);
1550 reg_pending_uses = INITIALIZE_REG_SET (reg_pending_uses_head);
1551 reg_pending_barrier = NOT_A_BARRIER;
1554 /* Free everything used by the dependency analysis code. */
1556 void
1557 finish_deps_global (void)
1559 FREE_REG_SET (reg_pending_sets);
1560 FREE_REG_SET (reg_pending_clobbers);
1561 FREE_REG_SET (reg_pending_uses);