1 # Makefile for GNU C compiler.
2 # Copyright (C) 1987, 88, 90-98, 1999 Free Software Foundation, Inc.
4 #This file is part of GNU CC.
6 #GNU CC is free software; you can redistribute it and/or modify
7 #it under the terms of the GNU General Public License as published by
8 #the Free Software Foundation; either version 2, or (at your option)
11 #GNU CC is distributed in the hope that it will be useful,
12 #but WITHOUT ANY WARRANTY; without even the implied warranty of
13 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 #GNU General Public License for more details.
16 #You should have received a copy of the GNU General Public License
17 #along with GNU CC; see the file COPYING. If not, write to
18 #the Free Software Foundation, 59 Temple Place - Suite 330,
19 #Boston MA 02111-1307, USA.
21 # The targets for external use include:
22 # all, doc, proto, install, install-cross, install-cross-rest,
23 # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
24 # stage1, stage2, stage3, stage4.
26 # Suppress smart makes who think they know how to automake Yacc files
29 # Directory where sources are, from where we are.
33 # Variables that exist for you to override.
34 # See below for how to change them for certain systems.
36 # List of language subdirectories.
37 # This is overridden by configure.
40 # Selection of languages to be made.
41 # This is overridden by configure.
42 CONFIG_LANGUAGES
= @all_languages@
43 LANGUAGES
= c proto gcov
$(exeext
) $(CONFIG_LANGUAGES
)
45 # Selection of languages to be made during stage1 build.
46 # This is overridden by configure.
47 BOOT_LANGUAGES
= c @all_boot_languages@
53 # Various ways of specifying flags for compilations:
54 # CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
55 # BOOT_CFLAGS is the value of CFLAGS to pass
56 # to the stage2 and stage3 compilations
57 # WARN_CFLAGS are the warning flags to pass to stage2 and stage3.
58 # (And for stage 1 if the native compiler is GCC.) It is
59 # separate from BOOT_CFLAGS because people tend to override optimization
60 # flags and we'd like them to still have warnings turned on. They are free
61 # to explicitly turn warnings off if they wish.
62 # XCFLAGS is used for most compilations but not when using the GCC just built.
63 # TCFLAGS is used for compilations with the GCC just built.
66 CFLAGS
= -g @stage1_warn_cflags@
67 BOOT_CFLAGS
= -O2
$(CFLAGS
)
68 WARN_CFLAGS
= -W
-Wall
69 # These exists to be overridden by the x-* and t-* files, respectively.
78 # srcdir might be a relative pathname which won't be valid in a subdirectory,
79 # so we must use objdir/srcdir instead to make it safe. objdir is always
81 BISON
= `if [ -f $(objdir)/../bison/bison ] ; then case $(srcdir) in \
82 /*) echo $(objdir)/../bison/bison -L $(srcdir)/../bison/ ;; \
83 *) echo $(objdir)/../bison/bison -L $(objdir)/$(srcdir)/../bison/ ;; \
84 esac; else echo bison ; fi`
86 LEX
= `if [ -f $(objdir)/../flex/flex ] ; then echo $(objdir)/../flex/flex ; else echo flex ; fi`
93 # on sysV, define this as cp.
95 # Some systems may be missing symbolic links, regular links, or both.
96 # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate.
99 # These permit overriding just for certain files.
100 INSTALL_PROGRAM
= @INSTALL_PROGRAM@
101 INSTALL_DATA
= @INSTALL_DATA@
102 MAKEINFO
= `if [ -f $(objdir)/../texinfo/makeinfo/Makefile ] ; \
103 then echo $(objdir)/../texinfo/makeinfo/makeinfo ; \
104 else echo makeinfo ; fi`
107 # For GNUmake: let us decide what gets passed to recursive makes.
111 # Define this as & to perform parallel make on a Sequent.
112 # Note that this has some bugs, and it seems currently necessary
113 # to compile all the gen* files first by hand to avoid erroneous results.
116 # How to invoke ranlib.
118 # Test to use to see whether ranlib exists on the system.
121 ||
( [ "$(host_canonical)" = "$(target)" ] \
122 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
124 # Compiler to use for compiling libgcc1.a.
125 # OLDCC should not be the GNU C compiler,
126 # since that would compile typical libgcc1.a functions such as mulsi3
127 # into infinite recursions.
130 # CFLAGS for use with OLDCC, for compiling libgcc1.a.
131 # NOTE: -O does not work on some Unix systems!
134 # Version of ar to use when compiling libgcc1.a.
138 # Target to use when installing include directory. Either
139 # install-headers-tar or install-headers-cpio.
140 INSTALL_HEADERS_DIR
= @build_install_headers_dir@
142 # Header files that are made available under the same name
143 # to programs compiled with GCC.
144 USER_H
= $(srcdir)/ginclude
/stdarg.h
$(srcdir)/ginclude
/stddef.h \
145 $(srcdir)/ginclude
/varargs.h
$(srcdir)/ginclude
/va-alpha.h \
146 $(srcdir)/ginclude
/va-h8300.h
$(srcdir)/ginclude
/va-i860.h \
147 $(srcdir)/ginclude
/va-i960.h
$(srcdir)/ginclude
/va-mips.h \
148 $(srcdir)/ginclude
/va-m88k.h
$(srcdir)/ginclude
/va-mn10200.h \
149 $(srcdir)/ginclude
/va-mn10300.h
$(srcdir)/ginclude
/va-pa.h \
150 $(srcdir)/ginclude
/va-pyr.h
$(srcdir)/ginclude
/va-sparc.h \
151 $(srcdir)/ginclude
/va-clipper.h
$(srcdir)/ginclude
/va-spur.h \
152 $(srcdir)/ginclude
/va-m32r.h
$(srcdir)/ginclude
/va-sh.h \
153 $(srcdir)/ginclude
/va-v850.h
$(srcdir)/ginclude
/va-arc.h \
154 $(srcdir)/ginclude
/iso646.h
$(srcdir)/ginclude
/va-ppc.h \
155 $(srcdir)/ginclude
/va-c4x.h
$(EXTRA_HEADERS
) $(LANG_EXTRA_HEADERS
) \
156 $(srcdir)/ginclude
/proto.h
$(srcdir)/ginclude
/stdbool.h
158 # Target to use whe installing assert.h. Some systems may
159 # want to set this empty.
160 INSTALL_ASSERT_H
= install-assert-h
162 # The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
163 # Usually the one we just built.
164 # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
165 GCC_FOR_TARGET
= .
/xgcc
-B.
/ -B
$(build_tooldir
)/bin
/
167 # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
168 # It omits XCFLAGS, and specifies -B./.
169 # It also specifies -I./include to find, e.g., stddef.h.
170 GCC_CFLAGS
=$(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) -I.
/include $(TCFLAGS
)
172 # Sed command to transform gcc to installed name. Overwritten by configure.
173 program_transform_name
= @program_transform_name@
174 program_transform_cross_name
= s
,^
,$(target_alias
)-,
176 build_canonical
= @build_canonical@
177 host_canonical
= @host_canonical@
179 # Tools to use when building a cross-compiler.
180 # These are used because `configure' appends `cross-make'
181 # to the makefile when making a cross-compiler.
183 # Use the tools from the build tree, if they are available.
185 # objdir is set by configure.
189 if [ -f $(objdir)/../binutils/ar ] ; then \
190 echo $(objdir)/../binutils/ar ; \
192 if [ "$(host_canonical)" = "$(target)" ] ; then \
195 t='$(program_transform_name)'; echo ar | sed -e $$t ; \
198 AR_FLAGS_FOR_TARGET
= rc
199 RANLIB_FOR_TARGET
= ` \
200 if [ -f $(objdir)/../binutils/ranlib ] ; then \
201 echo $(objdir)/../binutils/ranlib ; \
203 if [ "$(host_canonical)" = "$(target)" ] ; then \
206 t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \
209 RANLIB_TEST_FOR_TARGET
= \
210 [ -f
$(RANLIB_FOR_TARGET
) ] \
211 ||
( [ "$(host_canonical)" = "$(target)" ] \
212 && [ -f
/usr
/bin
/ranlib
-o
-f
/bin
/ranlib
] )
214 # Dir to search for system headers. Overridden by cross-make.
215 SYSTEM_HEADER_DIR
= /usr
/include
217 # Control whether to run fixproto.
218 STMP_FIXPROTO
= stmp-fixproto
220 # Test to see whether <limits.h> exists in the system header files.
221 LIMITS_H_TEST
= [ -f
$(SYSTEM_HEADER_DIR
)/limits.h
]
223 # There may be a premade insn-attrtab.c for this machine.
224 # (You could rebuild it with genattrtab as usual, but it takes a long time.)
225 # PREMADE_ATTRTAB is the file name of the file to use.
226 # PREMADE_ATTRTAB_MD is the md file it corresponds to.
227 PREMADE_ATTRTAB_MD
= Makefile
# Guaranteed not to cmp equal to md.
231 target_alias
=@target_alias@
232 xmake_file
=@dep_host_xmake_file@
233 tmake_file
=@dep_tmake_file@
234 out_file
=$(srcdir)/config
/@out_file@
235 out_object_file
=@out_object_file@
236 md_file
=$(srcdir)/config
/@md_file@
237 tm_file
=@tm_file_list@
238 build_xm_file
=@build_xm_file_list@
239 host_xm_file
=@host_xm_file_list@
240 lang_specs_files
=@lang_specs_files@
241 lang_options_files
=@lang_options_files@
242 lang_tree_files
=@lang_tree_files@
243 GCC_THREAD_FILE
=@thread_file@
244 OBJC_BOEHM_GC
=@objc_boehm_gc@
246 GTHREAD_FLAGS
=@gthread_flags@
247 # Be prepared for gcc2 merges.
248 gcc_version
=@gcc_version@
249 gcc_version_trigger
=@gcc_version_trigger@
250 version
=$(gcc_version
)
251 mainversion
=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
253 # Common prefix for installation directories.
254 # NOTE: This directory must exist when you start installation.
256 # Directory in which to put localized header files. On the systems with
257 # gcc as the native cc, `local_prefix' may not be `prefix' which is
259 # NOTE: local_prefix *should not* default from prefix.
260 local_prefix
= @local_prefix@
261 # Directory in which to put host dependent programs and libraries
262 exec_prefix = @
exec_prefix@
263 # Directory in which to put the executable for the command `gcc'
265 # Directory in which to put the directories used by the compiler.
267 # Directory in which the compiler finds executables, libraries, etc.
268 libsubdir
= $(libdir)/gcc-lib
/$(target_alias
)/$(version
)
269 # Used to produce a relative $(gcc_tooldir) in gcc.o
270 unlibsubdir
= ..
/..
/..
271 # Directory in which to find other cross-compilation tools and headers.
273 # Used in install-cross.
274 gcc_tooldir
= @gcc_tooldir@
275 # Since tooldir does not exist at build-time, use -B$(build_tooldir)/bin/
276 build_tooldir
= $(exec_prefix)/$(target_alias
)
277 # Directory in which the compiler finds g++ includes.
278 gcc_gxx_include_dir
= @gcc_gxx_include_dir@
279 # Directory to search for site-specific includes.
280 includedir = $(local_prefix
)/include
281 # assertdir is overridden in cross-make.
282 # (But this currently agrees with what is in cross-make.)
283 assertdir
= $(gcc_tooldir
)/include
284 # where the info files go
286 # Where cpp should go besides $prefix/bin if necessary
287 cpp_install_dir
= @cpp_install_dir@
288 # where the locale files go
289 datadir = $(prefix)/@DATADIRNAME@
290 localedir
= $(datadir)/locale
291 # Extension (if any) to put in installed man-page filename.
294 exeext
= @host_exeext@
295 build_exeext
= @build_exeext@
297 # Directory in which to put man pages.
299 man1dir = $(mandir)/man1
300 # Dir for temp files.
303 # Top build directory, relative to here.
306 # Whether we were configured with NLS.
309 # Internationalization library.
310 INTLLIBS
= @INTLLIBS@
312 # List of internationalization subdirectories.
314 INTL_SUBDIRS
= intl
$(POSUB
)
316 # Additional system libraries to link with.
319 # Change this to a null string if obstacks are installed in the
323 # Configure will set these if you need vfprintf and possibly _doprnt support.
327 # Specify the rule for actually making libgcc.a,
329 # and the rule for installing it.
330 INSTALL_LIBGCC
= install-libgcc
332 # Specify the rule for actually making libgcc1.a.
333 # The value may be empty; that means to do absolutely nothing
334 # with or for libgcc1.a.
337 # Specify the rule for making libgcc1.a for a cross-compiler.
338 # The default rule assumes that libgcc1.a is supplied by the user.
339 CROSS_LIBGCC1
= libgcc1.cross
341 # Specify the rule for actually making libgcc2.a.
344 # Options to use when compiling libgcc2.a.
345 # -g1 causes output of debug info only for file-scope entities.
346 # we use this here because that should be enough, and also
347 # so that -g1 will be tested.
349 LIBGCC2_DEBUG_CFLAGS
= -g1
350 LIBGCC2_CFLAGS
= -O2
$(LIBGCC2_INCLUDES
) $(GCC_CFLAGS
) $(TARGET_LIBGCC2_CFLAGS
) $(LIBGCC2_DEBUG_CFLAGS
) $(GTHREAD_FLAGS
) -DIN_LIBGCC2
-D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@
352 # Additional options to use when compiling libgcc2.a.
353 # Some targets override this to -Iinclude
356 # Additional target-dependent options for compiling libgcc2.a.
357 TARGET_LIBGCC2_CFLAGS
=
359 # Things which must be built before building libgcc2.a.
360 # Some targets override this to stmp-int-hdrs
363 # libgcc1-test target (must also be overridable for a target)
364 LIBGCC1_TEST
= libgcc1-test
366 # List of extra executables that should be compiled for this target machine
367 # that are used for compiling from source code to object code.
368 # The rules for compiling them should be in the t-* file for the machine.
369 EXTRA_PASSES
=@extra_passes@
371 # Like EXTRA_PASSES, but these are used when linking.
372 EXTRA_PROGRAMS
= @extra_programs@
374 # List of extra object files that should be compiled for this target machine.
375 # The rules for compiling them should be in the t-* file for the machine.
376 EXTRA_PARTS
= @extra_parts@
378 # List of extra object files that should be compiled and linked with
379 # compiler proper (cc1, cc1obj, cc1plus).
380 EXTRA_OBJS
= @extra_objs@
382 # List of extra object files that should be compiled and linked with
384 EXTRA_GCC_OBJS
=@host_extra_gcc_objs@
386 # List of additional header files to install.
387 # Often this is edited directly by `configure'.
388 EXTRA_HEADERS
=@extra_headers_list@
390 # Set this to `collect2' to enable use of collect2.
391 USE_COLLECT2
= @will_use_collect2@
392 MAYBE_USE_COLLECT2
= @maybe_use_collect2@
393 # It is convenient for configure to add the assignment at the beginning,
394 # so don't override it here.
395 USE_COLLECT2
= collect2
$(exeext
)
397 # List of extra C and assembler files to add to libgcc1.a.
398 # Assembler files should have names ending in `.asm'.
401 # List of extra C and assembler files to add to libgcc2.a.
402 # Assembler files should have names ending in `.asm'.
405 # Handle cpp installation.
409 # We do not try to build float.h anymore. Let configure select the
410 # appropriate pre-built float.h file for the target.
411 FLOAT_H
=@float_h_file@
413 # Program to convert libraries.
416 # Control whether header files are installed.
417 INSTALL_HEADERS
=install-headers
419 # Options for tar when copying trees. So HPUX can override it.
422 # Additional directories of header files to run fixincludes on.
423 # These should be directories searched automatically by default
424 # just as /usr/include is.
425 # *Do not* use this for directories that happen to contain
426 # header files, but are not searched automatically by default.
427 # On most systems, this is empty.
428 OTHER_FIXINCLUDES_DIRS
=
430 # A list of all the language-specific executables.
431 # This is overridden by configure.
432 COMPILERS
= cc1
$(exeext
) @all_compilers@
434 # List of things which should already be built whenever we try to use xgcc
435 # to compile anything (without linking).
436 GCC_PASSES
=xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
)
438 # List of things which should already be built whenever we try to use xgcc
440 GCC_PARTS
=$(GCC_PASSES
) $(LIBGCC
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) $(EXTRA_PARTS
)
442 # Directory to link to, when using the target `maketest'.
445 # Guaranteed to not exist when not passing md through cpp.
446 # This value is overridden directly by configure.
447 MD_FILE
= md-cpp-not-used
449 # Flags to use when cross-building GCC.
450 # Prefix to apply to names of object files when using them
451 # to run on the machine we are compiling on.
453 # Prefix to apply to names of object files when compiling them
454 # to run on the machine we are compiling on.
455 # The default for this variable is chosen to keep these rules
456 # out of the way of the other rules for compiling the same source files.
459 HOST_CFLAGS
=$(ALL_CFLAGS
)
461 HOST_INTLLIBS
=$(INTLLIBS
)
462 HOST_LDFLAGS
=$(LDFLAGS
)
463 HOST_CPPFLAGS
=$(ALL_CPPFLAGS
)
464 HOST_ALLOCA
=$(ALLOCA
)
465 HOST_MALLOC
=$(MALLOC
)
466 HOST_OBSTACK
=$(OBSTACK
)
467 HOST_VFPRINTF
=$(VFPRINTF
)
468 HOST_DOPRINT
=$(DOPRINT
)
470 # Actual name to use when installing a native compiler.
471 GCC_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcc | sed -e $$t`
472 PROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo protoize | sed -e $$t`
473 UNPROTOIZE_INSTALL_NAME
= `t='$(program_transform_name)'; echo unprotoize | sed -e $$t`
474 GCOV_INSTALL_NAME
= `t='$(program_transform_name)'; echo gcov | sed -e $$t`
476 # Actual name to use when installing a cross-compiler.
477 GCC_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo gcc | sed -e $$t`
478 PROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo protoize | sed -e $$t`
479 UNPROTOIZE_CROSS_NAME
= `t='$(program_transform_cross_name)'; echo unprotoize | sed -e $$t`
481 # Choose the real default target.
484 # Choose the real install target.
485 INSTALL_TARGET
=install-normal
487 # Setup the testing framework, if you have one
488 EXPECT
= `if [ -f $${rootme}/../expect/expect ] ; then \
489 echo $${rootme}/../expect/expect ; \
490 else echo expect ; fi`
492 RUNTEST
= `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \
493 echo $${srcdir}/../dejagnu/runtest ; \
494 else echo runtest; fi`
497 # Extra symbols for fixproto to define when parsing headers.
500 # Extra flags to use when compiling crt{begin,end}.o.
503 # Extra flags to use when compiling [m]crt0.o.
506 # "t" or nothing, for building multilibbed versions of, say, crtbegin.o.
509 # End of variables for you to override.
511 # Definition of `all' is here so that new rules inserted by sed
512 # do not specify the default target.
513 # The real definition is under `all.internal' (for native compilers)
514 # or `all.cross' (for cross compilers).
517 # This tells GNU Make version 3 not to put all variables in the environment.
520 # sed inserts variable overrides after the following line.
534 # Now figure out from those variables how to compile and link.
538 # IN_GCC tells various files that system.h, toplev.c, etc are available.
539 INTERNAL_CFLAGS
= $(CROSS
) -DIN_GCC
$(SCHED_CFLAGS
) @extra_c_flags@
541 # This is the variable actually used when we compile.
542 # If you change this line, you probably also need to change the definition
543 # of HOST_CFLAGS in build-make to match.
544 ALL_CFLAGS
= $(INTERNAL_CFLAGS
) $(X_CFLAGS
) $(T_CFLAGS
) $(CFLAGS
) $(XCFLAGS
) \
548 ALL_CPPFLAGS
= $(CPPFLAGS
) $(X_CPPFLAGS
) $(T_CPPFLAGS
)
550 # Even if ALLOCA is set, don't use it if compiling with GCC.
551 USE_ALLOCA
= ${ALLOCA}
552 USE_HOST_ALLOCA
= ` case "${HOST_ALLOCA}" in ?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
553 USE_HOST_MALLOC
= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
554 USE_HOST_OBSTACK
= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
555 USE_HOST_VFPRINTF
= ` case "${HOST_VFPRINTF}" in ?*) echo ${HOST_PREFIX}${HOST_VFPRINTF} ;; esac `
556 USE_HOST_DOPRINT
= ` case "${HOST_DOPRINT}" in ?*) echo ${HOST_PREFIX}${HOST_DOPRINT} ;; esac `
558 # Dependency on obstack, alloca, malloc or whatever library facilities
559 # are not installed in the system libraries.
560 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
561 LIBDEPS
= $(INTLLIBS
) $(OBSTACK
) $(ALLOCA
) $(MALLOC
) $(VFPRINTF
) $(DOPRINT
)
563 # Likewise, for use in the tools that must run on this machine
564 # even if we are cross-building GCC.
565 # We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
566 HOST_LIBDEPS
= $(HOST_PREFIX
)$(HOST_INTLLIBS
) $(HOST_PREFIX
)$(HOST_OBSTACK
) $(HOST_PREFIX
)$(HOST_ALLOCA
) $(HOST_PREFIX
)$(HOST_MALLOC
) $(HOST_PREFIX
)$(HOST_VFPRINTF
) $(HOST_PREFIX
)$(HOST_DOPRINT
)
568 # How to link with both our special library facilities
569 # and the system's installed libraries.
570 LIBS
= $(OBSTACK
) $(USE_ALLOCA
) $(MALLOC
) $(INTLLIBS
) @LIBS@
$(VFPRINTF
) $(DOPRINT
) $(CLIB
) ..
/libiberty
/libiberty.a
572 # Likewise, for use in the tools that must run on this machine
573 # even if we are cross-building GCC.
574 HOST_LIBS
= $(USE_HOST_OBSTACK
) $(USE_HOST_ALLOCA
) $(USE_HOST_MALLOC
) \
575 $(HOST_INTLLIBS
) $(USE_HOST_VFPRINTF
) $(USE_HOST_DOPRINT
) \
578 HOST_RTL
= $(HOST_PREFIX
)rtl.o
$(HOST_PREFIX
)bitmap.o
579 HOST_RTLANAL
= $(HOST_PREFIX
)rtlanal.o
580 HOST_PRINT
= $(HOST_PREFIX
)print-rtl.o
582 # Specify the directories to be searched for header files.
583 # Both . and srcdir are used, in that order,
584 # so that tm.h and config.h will be found in the compilation
585 # subdirectory rather than in the source directory.
586 INCLUDES
= -I.
-I
$(srcdir) -I
$(srcdir)/config
-I
$(srcdir)/..
/include
588 # Always use -I$(srcdir)/config when compiling.
590 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $<
592 # This tells GNU make version 3 not to export all the variables
593 # defined in this file into the environment.
596 # Support for additional languages (other than c and objc).
597 # ??? objc can be supported this way too (leave for later).
599 # These next lines are overridden by configure.
600 LANG_MAKEFILES
= @all_lang_makefiles@
601 LANG_STAGESTUFF
= @all_stagestuff@
602 LANG_DIFF_EXCLUDES
= @all_diff_excludes@
603 LANG_LIB2FUNCS
= @all_lib2funcs@
604 LANG_EXTRA_HEADERS
= @all_headers@
606 # Flags to pass to recursive makes.
607 # CC is set by configure. Hosts without symlinks need special handling
608 # because we need CC="stage1/xgcc -Bstage1/" to work in the language
610 # ??? The choices here will need some experimenting with.
612 "AR_FLAGS_FOR_TARGET=$(AR_FLAGS_FOR_TARGET)" \
613 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
615 "BISONFLAGS=$(BISONFLAGS)" \
616 "CC=@cc_set_by_configure@" \
619 "GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
620 "LDFLAGS=$(LDFLAGS)" \
622 "LEXFLAGS=$(LEXFLAGS)" \
625 "MAKEINFO=$(MAKEINFO)" \
626 "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
627 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
628 "RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
630 "STAGE_PREFIX=@stage_prefix_set_by_configure@" \
632 "build_exeext=$(build_exeext)" \
634 "exec_prefix=$(exec_prefix)" \
636 "local_prefix=$(local_prefix)" \
637 "gxx_include_dir=$(gcc_gxx_include_dir)" \
638 "tooldir=$(tooldir)" \
639 "gcc_tooldir=$(gcc_tooldir)" \
641 "libsubdir=$(libsubdir)" \
642 "datadir=$(datadir)" \
643 "distdir=../tmp/\$$(subdir)" \
644 "localedir=$(localedir)"
646 PREPEND_DOTDOT_TO_RELATIVE_PATHS
= sed \
647 -e
's|^ *[^ /][^ /]*/|%&|' \
649 -e
's|% *[^- /]|%&|g' \
652 SUBDIR_FLAGS_TO_PASS
= $(ORDINARY_FLAGS_TO_PASS
) \
653 "CC=`echo @cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`"
655 # Lists of files for various purposes.
657 # Language-specific object files for C and Objective C.
658 C_AND_OBJC_OBJS
= c-lex.o c-pragma.o c-decl.o c-typeck.o c-convert.o \
659 c-aux-info.o c-common.o c-iterate.o @extra_c_objs@
661 # Language-specific object files for C.
662 C_OBJS
= c-parse.o c-lang.o
$(C_AND_OBJC_OBJS
)
664 SCHED_PREFIX
= @sched_prefix@
665 SCHED_CFLAGS
= @sched_cflags@
667 # Language-independent object files.
668 OBJS
= toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
669 function.o stmt.o except.o expr.o calls.o expmed.o explow.o optabs.o \
670 intl.o varasm.o rtl.o print-rtl.o rtlanal.o emit-rtl.o genrtl.o real.o \
671 dbxout.o sdbout.o dwarfout.o dwarf2out.o xcoffout.o bitmap.o alias.o gcse.o \
672 integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o varray.o \
673 regclass.o regmove.o local-alloc.o global.o reload.o reload1.o caller-save.o \
674 insn-peep.o reorg.o
$(SCHED_PREFIX
)sched.o final.o recog.o reg-stack.o \
675 insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o lcm.o \
676 profile.o insn-attrtab.o
$(out_object_file
) getpwd.o
$(EXTRA_OBJS
) convert.o \
677 mbchar.o dyn-string.o splay-tree.o graph.o sbitmap.o resource.o
679 # GEN files are listed separately, so they can be built before doing parallel
680 # makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
681 # them before rtl.o is compiled.
682 GEN
= genemit genoutput genrecog genextract genflags gencodes genconfig \
683 genpeep gengenrtl gencheck
687 # Files to be copied away after each stage in building.
688 STAGESTUFF
= *$(objext
) insn-flags.h insn-config.h insn-codes.h \
689 insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
690 insn-attr.h insn-attrtab.c insn-opinit.c tree-check.h \
691 s-flags s-config s-codes s-mlib s-under\
692 s-output s-recog s-emit s-extract s-peep s-check \
693 s-attr s-attrtab s-opinit s-crt s-crtS s-crt0 \
694 genemit
$(build_exeext
) genoutput
$(build_exeext
) genrecog
$(build_exeext
) \
695 genextract
$(build_exeext
) genflags
$(build_exeext
) gencodes
$(build_exeext
) \
696 genconfig
$(build_exeext
) genpeep
$(build_exeext
) genattrtab
$(build_exeext
) \
697 genattr
$(build_exeext
) genopinit
$(build_exeext
) gengenrtl
$(build_exeext
) \
698 gencheck
$(build_exeext
) \
699 xgcc
$(exeext
) cc1
$(exeext
) cpp$(exeext
) $(EXTRA_PASSES
) \
700 $(EXTRA_PARTS
) $(EXTRA_PROGRAMS
) gcc-cross
$(exeext
) \
701 $(CCCP
)$(exeext
) cc1obj
$(exeext
) enquire
$(exeext
) \
702 protoize
$(exeext
) unprotoize
$(exeext
) \
703 specs collect2
$(exeext
) $(USE_COLLECT2
) underscore.c \
705 *.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop \
706 *.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.gcse
*.flow2 \
710 # Members of libgcc1.a.
711 LIB1FUNCS
= _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
712 _lshrsi3 _ashrsi3 _ashlsi3 \
713 _divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
714 _fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
715 _addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
716 _eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
717 _eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
719 # Library members defined in libgcc2.c.
720 LIB2FUNCS
= _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
721 _lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
722 _udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
723 _fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
724 _fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
725 _fixtfdi _fixunstfdi _floatditf \
726 __gcc_bcmp _varargs __dummy _eprintf \
727 _bb _shtab _clear_cache _trampoline __main _exit \
732 FPBIT_FUNCS
= _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \
733 _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \
734 _lt_sf _le_sf _si_to_sf _sf_to_si _negate_sf _make_sf \
737 DPBIT_FUNCS
= _pack_df _unpack_df _addsub_df _mul_df _div_df \
738 _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \
739 _lt_df _le_df _si_to_df _df_to_si _negate_df _make_df \
742 # The files that "belong" in CONFIG_H are deliberately omitted
743 # because having them there would not be useful in actual practice.
744 # All they would do is cause complete recompilation every time
745 # one of the machine description files is edited.
746 # That may or may not be what one wants to do.
747 # If it is, rm *.o is an easy way to do it.
748 # CONFIG_H = $(host_xm_file) $(tm_file)
750 RTL_BASE_H
= rtl.h rtl.def machmode.h machmode.def
751 RTL_H
= $(RTL_BASE_H
) genrtl.h
752 TREE_H
= tree.h real.h tree.def machmode.h machmode.def tree-check.h
753 BASIC_BLOCK_H
= basic-block.h bitmap.h sbitmap.h
754 DEMANGLE_H
= $(srcdir)/..
/include/demangle.h
756 EXPR_H
= expr.h insn-codes.h
757 REGS_H
= regs.h varray.h machmode.h machmode.def
759 # Language makefile fragments.
761 # The following targets define the interface between us and the languages.
763 # all.build, all.cross, start.encap, rest.encap,
765 # install-normal, install-common, install-info, install-man,
766 # uninstall, distdir,
767 # mostlyclean, clean, distclean, extraclean, maintainer-clean,
768 # stage1, stage2, stage3, stage4
770 # Each language is linked in with a series of hooks (since we can't use `::'
771 # targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
772 # Configure computes and adds these here.
777 # sed inserts language fragments after the following line.
778 ####language fragments
781 # End of language makefile fragments.
783 # The only suffixes we want for implicit rules are .c and .o, so clear
784 # the list and add them. This speeds up GNU Make, and allows -r to work.
788 Makefile
: $(srcdir)/Makefile.in config.status
$(srcdir)/version.c \
789 $(xmake_file
) $(tmake_file
) $(LANG_MAKEFILES
)
790 $(SHELL
) $(srcdir)/configure.frag
$(srcdir) "$(SUBDIRS)" \
791 "$(xmake_file)" "$(tmake_file)"
792 cp config.status config.run
793 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.run
796 $(srcdir)/configure
: $(srcdir)/configure.in
797 cd
$(srcdir); autoconf
799 # cstamp-h.in controls rebuilding of config.in.
800 # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't
801 # delete it. A stamp file is needed as autoheader won't update the file if
802 # nothing has changed.
803 # It remains in the source directory and is part of the distribution.
804 # This follows what is done in shellutils, fileutils, etc.
805 # "echo timestamp" is used instead of touch to be consistent with other
806 # packages that use autoconf (??? perhaps also to avoid problems with patch?).
807 # ??? Newer versions have a maintainer mode that may be useful here.
808 $(srcdir)/config.in
: $(srcdir)/cstamp-h.in
809 $(srcdir)/cstamp-h.in
: $(srcdir)/configure.in
$(srcdir)/acconfig.h
810 cd
$(srcdir) && autoheader
811 @
rm -f
$(srcdir)/cstamp-h.in
812 echo timestamp
> $(srcdir)/cstamp-h.in
813 auto-host.h
: cstamp-h
; @true
814 cstamp-h
: config.in config.status
815 CONFIG_HEADERS
=auto-host.h
:config.in LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
817 # Really, really stupid make features, such as SUN's KEEP_STATE, may force
818 # a target to build even if it is up-to-date. So we must verify that
819 # config.status does not exist before failing.
820 config.status
: configure version.c
821 @if
[ ! -f config.status
] ; then \
822 echo You must configure gcc. Look at the INSTALL file for details.
; \
825 LANGUAGES
="$(CONFIG_LANGUAGES)" $(SHELL
) config.status
--recheck
; \
828 all.internal
: start.encap rest.encap doc
829 # This is what to compile if making a cross-compiler.
830 # Note that we can compile enquire using the cross-compiler just built,
831 # although we can't run it on this machine.
832 all.cross
: native gcc-cross specs stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) \
833 $(LIBGCC1_TEST
) $(EXTRA_PARTS
) lang.
all.cross doc
834 # This is what to compile if making gcc with a cross-compiler.
835 all.build
: native xgcc
$(exeext
) $(EXTRA_PARTS
) lang.
all.build
836 # This is what must be made before installing GCC and converting libraries.
837 start.encap
: native xgcc
$(exeext
) specs
$(LIBGCC1
) xlimits.h lang.start.encap
838 # These can't be made until after GCC can run.
839 rest.encap
: stmp-headers
$(STMP_FIXPROTO
) $(LIBGCC
) $(EXTRA_PARTS
) lang.rest.encap
840 # This is what is made with the host's compiler
841 # whether making a cross compiler or not.
842 native
: config.status auto-host.h
cpp$(exeext
) intl.
all $(LANGUAGES
) \
843 $(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
)
845 # Define the names for selecting languages in LANGUAGES.
849 # Tell GNU make these are phony targets.
850 .PHONY
: C c PROTO proto
852 # On the target machine, finish building a cross compiler.
853 # This does the things that can't be done on the host machine.
854 rest.cross
: $(LIBGCC
) specs
856 # Verify that it works to compile and link libgcc1-test.
857 # If it does, then there are sufficient replacements for libgcc1.a.
858 libgcc1-test
: libgcc1-test.o native
$(GCC_PARTS
)
859 @echo
"Testing libgcc1. Ignore linker warning messages."
860 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) libgcc1-test.o
-o libgcc1-test \
861 -nostartfiles
-nostdlib
`$(GCC_FOR_TARGET) --print-libgcc-file-name`
862 libgcc1-test.o
: libgcc1-test.c native xgcc
$(exeext
)
863 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) -c
$(srcdir)/libgcc1-test.c
865 # Recompile all the language-independent object files.
866 # This is used only if the user explicitly asks for it.
867 compilations
: ${OBJS}
869 # Create a list of the language-independent object files so the language
870 # subdirectories needn't mention their names explicitly.
871 stamp-objlist
: $(OBJS
)
872 echo
" $(OBJS)" | sed
-e
's, \([a-z0-9]\), ../\1,g' -e
's/\.o/$(objext)/g' >stamp-objlist
874 # We call this executable `xgcc' rather than `gcc'
875 # to avoid confusion if the current directory is in the path
876 # and CC is `gcc'. It is renamed to `gcc' when it is installed.
877 xgcc
$(exeext
): gcc.o version.o intl.o
prefix.o \
878 version.o
$(LIBDEPS
) $(EXTRA_GCC_OBJS
)
879 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ gcc.o
prefix.o version.o \
880 $(EXTRA_GCC_OBJS
) $(LIBS
)
882 # Dump a specs file to make -B./ read these specs over installed ones.
884 $(GCC_FOR_TARGET
) -dumpspecs
> tmp-specs
887 # We do want to create an executable named `xgcc', so we can use it to
889 # Also create gcc-cross, so that install-common will install properly.
890 gcc-cross
: xgcc
$(exeext
)
891 cp xgcc
$(exeext
) gcc-cross
$(exeext
)
893 cc1
$(exeext
): $(P
) $(OBJS
) $(C_OBJS
) $(LIBDEPS
)
894 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(OBJS
) $(C_OBJS
) $(LIBS
)
896 # Build the version of limits.h that we will install.
897 xlimits.h
: glimits.h limitx.h limity.h
898 if
$(LIMITS_H_TEST
) ; then \
899 cat
$(srcdir)/limitx.h
$(srcdir)/glimits.h
$(srcdir)/limity.h
> tmp-xlimits.h
; \
901 cat
$(srcdir)/glimits.h
> tmp-xlimits.h
; \
903 mv tmp-xlimits.h xlimits.h
906 # This is done in two parts because some functions, in libgcc1.c,
907 # must be compiled with something other than GCC,
908 # while the rest, in libgcc2.c, must be compiled with xgcc.
909 # That means we can't do libgcc2.c until after xgcc, cc1, etc.
911 # Use this as value of LIBGCC1 to cause conversion to GNU library format.
912 # LIBCONVERT should put its output in libgcc1.conv.
913 libgcc1.conv
: libgcc1.a
914 $(LIBCONVERT
) libgcc1.a libgcc1.conv
916 # Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
917 # Make an empty file instead.
918 libgcc1.null
: $(GCC_PASSES
)
919 echo
"void __foo () {}" > dummy.c
920 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) -c dummy.c
921 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) libgcc1.null dummy
$(objext
)
922 rm -f dummy
$(objext
) dummy.c
924 # This is $(LIBGCC1) for a cross-compiler.
925 # We have no automatic way of building libgcc1.a,
926 # so it's up to the installer to find a way to do that.
927 # This rule deliberately does not depend on libgcc1.a
928 # so that it will fail if the installer hasn't provided it.
930 mv libgcc1.a libgcc1.cross ||
(echo You must find a way to make libgcc1.a
; false
)
932 # Compile the library of arithmetic subroutines with the native compiler.
933 # Don't compile it with GCC!
934 # (That would cause most arithmetic functions to call themselves.)
936 # NOTE: If you modify these rules substantially, please be sure to
937 # check at least config/i386/t-sco5 and possibly other makefile
939 libgcc1.a
: libgcc1.c
$(CONFIG_H
) $(LIB1FUNCS_EXTRA
) config.status
941 # Actually build it in tmplibgcc1.a, then rename at end,
942 # so that libgcc1.a itself remains nonexistent if compilation is aborted.
943 # -e causes any failing command to make this rule fail.
944 # -e doesn't work in certain shells, so we test $$? as well.
945 # lynx has a broken ar, it always complains when the initial library is
946 # empty, thus this command works only if we don't do -e
947 # There is a trailing backslash (\) deleted from the following line.
949 for name in
$(LIB1FUNCS
); \
952 rm -f
$${name}$(objext
); \
953 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
-DL
$${name} $(srcdir)/libgcc1.c
; \
954 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
955 mv libgcc1
$(objext
) $${name}$(objext
); \
956 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
957 rm -f
$${name}$(objext
); \
959 # Some shells crash when a loop has no items.
960 # So make sure there is always at least one--`..'.
962 # We don't use -e here because there are if statements
963 # that should not make the command give up when the if condition is false.
964 # Instead, we test for failure after each command where it matters.
965 for file in ..
$(LIB1FUNCS_EXTRA
); \
967 if
[ x
$${file} != x..
]; then \
968 name
=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
970 if
[ $${name}.asm
= $${file} ]; then \
971 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
973 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -c
$${file}; \
974 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
975 $(OLDAR
) $(OLDAR_FLAGS
) tmplibgcc1.a
$${name}$(objext
); \
976 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
977 rm -f
$${name}.s
$${name}$(objext
); \
981 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
982 $(RANLIB_FOR_TARGET
) tmplibgcc1.a
; \
984 mv tmplibgcc1.a libgcc1.a
986 # Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
987 # functions. LIB1ASMSRC is the name of the source file in the config
989 libgcc1-asm.a
: libgcc2.ready config.status
$(srcdir)/config
/$(LIB1ASMSRC
)
990 -rm -f tmplibgcc1.a libgcc1.S
991 cp
$(srcdir)/config
/$(LIB1ASMSRC
) libgcc1.S
992 # Actually build it in tmplibgcc1.a, then rename at end,
993 # so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
994 # -e causes any failing command to make this rule fail.
995 # -e doesn't work in certain shells, so we test $$? as well.
996 # lynx has a broken ar, it always complains when the initial library is
997 # empty, thus this command works only if we don't do -e
998 # There is a trailing backslash (\) deleted from the following line.
1000 for name in
$(LIB1ASMFUNCS
); \
1003 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} libgcc1.S
; \
1004 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1005 mv libgcc1
$(objext
) $${name}$(objext
); \
1006 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc1.a
$${name}$(objext
); \
1007 rm -f
$${name}$(objext
); \
1010 mv tmplibgcc1.a libgcc1-asm.a
1012 # Generate assembly versions of the functions required for libgcc1.
1013 # You'll still need to massage the code by hand (possibly hacking
1014 # underscores and local labels) but this will get you started.
1015 libgcc1.S
: libgcc1.c
$(CONFIG_H
) config.status
1018 for name in
$(LIB1FUNCS
); \
1021 $(OLDCC
) -DIN_LIBGCC1
$(CCLIBFLAGS
) $(INCLUDES
) -S
-DL
$${name} $(srcdir)/libgcc1.c
; \
1022 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1023 echo
'#ifdef ' L
$${name} >> libgcc1.S
; \
1024 cat libgcc1.s
>> libgcc1.S
; \
1025 echo
'#endif /*' L
$${name} '*/' >> libgcc1.S
; \
1026 echo
"" >> libgcc1.S
; \
1029 # Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
1030 # But recompiling cc1 should not force recompilation of libgcc2.a.
1031 # If you want to force recompilation, delete libgcc2.a.
1032 libgcc2.ready
: $(GCC_PASSES
) $(LIBGCC2_DEPS
) stmp-int-hdrs
$(STMP_FIXPROTO
)
1033 -if
[ -f libgcc2.ready
] ; then \
1036 touch libgcc2.ready
; \
1039 LIB2ADD
= $(srcdir)/frame.c
$(LIB2FUNCS_EXTRA
) $(LANG_LIB2FUNCS
)
1040 libgcc2.a
: libgcc2.c libgcc2.ready
$(CONFIG_H
) $(FPBIT
) $(DPBIT
) $(LIB2ADD
) \
1041 machmode.h longlong.h frame.h gbl-ctors.h config.status
1042 # Actually build it in tmplibgcc2.a, then rename at end,
1043 # so that libgcc2.a itself remains nonexistent if compilation is aborted.
1045 # -e causes any failing command to make this rule fail.
1046 # -e doesn't work in certain shells, so we test $$? as well.
1047 # lynx has a broken ar, it always complains when the initial library is
1048 # empty, thus this command works only if we don't do -e
1049 # There is a trailing backslash (\) deleted from the following line.
1051 for name in
$(LIB2FUNCS
); \
1054 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1055 $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1056 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1057 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1058 rm -f
$${name}$(objext
); \
1060 for name in
$(LIB2FUNCS_EH
); \
1063 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) -fexceptions
$(INCLUDES
) -c \
1064 -DL
$${name} $(srcdir)/libgcc2.c
-o
$${name}$(objext
); \
1065 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1066 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1067 rm -f
$${name}$(objext
); \
1069 if
[ x
$(FPBIT
) != x
]; then \
1070 for name in
$(FPBIT_FUNCS
); \
1073 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1074 -DFINE_GRAINED_LIBRARIES
$(FPBIT
) -o
$${name}$(objext
); \
1075 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1076 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1077 rm -f
$${name}$(objext
); \
1080 if
[ x
$(DPBIT
) != x
]; then \
1081 for name in
$(DPBIT_FUNCS
); \
1084 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
-DL
$${name} \
1085 -DFINE_GRAINED_LIBRARIES
$(DPBIT
) -o
$${name}$(objext
); \
1086 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1087 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${name}$(objext
); \
1088 rm -f
$${name}$(objext
); \
1091 # Some shells crash when a loop has no items.
1092 # So make sure there is always at least one--`..'.
1094 # We don't use -e here because there are if statements
1095 # that should not make the command give up when the if condition is false.
1096 # Instead, we test for failure after each command where it matters.
1097 for file in
$(LIB2ADD
); do \
1098 name
=`echo $${file} | sed -e 's/[.][cSo]$$//' -e 's/[.]asm$$//' -e 's/[.]txt$$//'`; \
1099 oname
=` echo $${name} | sed -e 's,.*/,,'`; \
1100 if
[ $${name}.txt
= $${file} ]; then \
1101 for f in ..
`cat $${file}`; do if
[ x
$${f} != x..
]; then \
1102 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1103 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1104 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" CC
="$(CC)" \
1105 CFLAGS
="$(CFLAGS)" HOST_PREFIX
="$(HOST_PREFIX)" \
1106 HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1107 LANGUAGES
="$(LANGUAGES)" \
1108 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $${f}; \
1109 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1110 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${f}; \
1116 if
[ $${name}.asm
= $${file} ]; then \
1117 cp
$${file} $${name}.s || exit
1; file
=$${name}.s
; \
1119 $(GCC_FOR_TARGET
) $(LIBGCC2_CFLAGS
) $(INCLUDES
) -c
$${file}; \
1120 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1121 $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) tmplibgcc2.a
$${oname}$(objext
); \
1122 rm -f
$${name}.s
$${oname}$(objext
); \
1125 mv tmplibgcc2.a libgcc2.a
1126 # These lines were deleted from above the mv command
1127 # because ranlibing libgcc.a itself should suffice.
1128 # -if [ x${HPUX_GAS} = x ] ; then \
1129 # if $(RANLIB_TEST_FOR_TARGET) ; then \
1130 # $(RANLIB_FOR_TARGET) tmplibgcc2.a;
1134 # Combine the various libraries into a single library, libgcc.a.
1135 libgcc.a
: $(LIBGCC1
) $(LIBGCC2
)
1136 -rm -rf tmplibgcc.a libgcc.a tmpcopy
1138 -if
[ x
$(LIBGCC1
) != x
]; \
1139 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1142 # Some versions of ar (specifically the one in RISC/os 5.x), create an
1143 # unwritable table of contents file, and then print an error message when
1144 # the second ar command tries to overwrite this file. To avoid the error
1145 # message from ar, we make sure all files are writable.
1146 -(cd tmpcopy
; chmod
+w
* > /dev
/null
2>&1)
1147 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1148 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1150 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1151 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1153 # Actually build it in tmplibgcc.a, then rename at end,
1154 # so that libgcc.a itself remains nonexistent if compilation is aborted.
1155 mv tmplibgcc.a libgcc.a
1157 # Use the genmultilib shell script to generate the information the gcc
1158 # driver program needs to select the library directory based on the
1160 multilib.h
: s-mlib
; @true
1161 s-mlib
: $(srcdir)/genmultilib Makefile
1162 $(SHELL
) $(srcdir)/genmultilib \
1163 "$(MULTILIB_OPTIONS)" \
1164 "$(MULTILIB_DIRNAMES)" \
1165 "$(MULTILIB_MATCHES)" \
1166 "$(MULTILIB_EXCEPTIONS)" \
1167 "$(MULTILIB_EXTRA_OPTS)" > tmp-mlib.h
1168 $(srcdir)/move-if-change tmp-mlib.h multilib.h
1171 # Build multiple copies of libgcc.a, one for each target switch.
1172 stmp-multilib
: $(LIBGCC1
) libgcc2.c libgcc2.ready
$(CONFIG_H
) \
1174 $(LIB2ADD
) machmode.h longlong.h gbl-ctors.h config.status
1175 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
1176 dir=`echo $$i | sed -e 's/;.*$$//'`; \
1177 flags
=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
1178 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1179 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1180 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1181 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1182 RANLIB_FOR_TARGET
="$(RANLIB_FOR_TARGET)" \
1183 RANLIB_TEST_FOR_TARGET
="$(RANLIB_TEST_FOR_TARGET)" \
1184 LANGUAGES
="$(LANGUAGES)" \
1185 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1186 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS) $${flags}" \
1187 MULTILIB_CFLAGS
="$${flags}" \
1188 LIBGCC1
="$(LIBGCC1)" LIBGCC2
="$(LIBGCC2)" \
1189 dir="$${dir}" stmp-multilib-sub
; \
1190 if
[ $$?
-eq
0 ] ; then true
; else exit
1; fi
; \
1194 # Subroutine of stmp-multilib so make -n works.
1197 if
[ -d
$(dir) ]; then \
1199 rm -f libgcc.a
$(EXTRA_MULTILIB_PARTS
); \
1202 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1203 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1204 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1205 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1206 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1207 LANGUAGES
="$(LANGUAGES)" \
1208 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC2
)
1209 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1211 else rm -f
$(LIBGCC1
); \
1213 if
[ x
$(LIBGCC1
) != xlibgcc1-asm.a
]; \
1216 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1217 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1218 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1219 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1220 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1221 LANGUAGES
="$(LANGUAGES)" \
1222 LIBGCC2_CFLAGS
="$(LIBGCC2_CFLAGS)" $(LIBGCC1
); \
1224 rm -rf tmplibgcc.a tmpcopy
1226 if
[ x
$(LIBGCC1
) != x
]; \
1227 then
(cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC1
)); \
1230 (cd tmpcopy
; $(AR_FOR_TARGET
) x ..
/$(LIBGCC2
))
1231 (cd tmpcopy
; $(AR_FOR_TARGET
) $(AR_FLAGS_FOR_TARGET
) ..
/tmplibgcc.a
*$(objext
))
1232 rm -rf libgcc2.a tmpcopy
1233 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
1234 $(RANLIB_FOR_TARGET
) tmplibgcc.a
; \
1236 if
[ -d
$(dir) ]; then true
; else mkdir
$(dir); fi
1237 mv tmplibgcc.a
$(dir)/libgcc.a
1238 for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
1239 $(MAKE
) GCC_FOR_TARGET
="$(GCC_FOR_TARGET)" \
1240 AR_FOR_TARGET
="$(AR_FOR_TARGET)" \
1241 AR_FLAGS_FOR_TARGET
="$(AR_FLAGS_FOR_TARGET)" \
1242 CC
="$(CC)" CFLAGS
="$(CFLAGS)" \
1243 HOST_PREFIX
="$(HOST_PREFIX)" HOST_PREFIX_1
="$(HOST_PREFIX_1)" \
1244 LANGUAGES
="$(LANGUAGES)" \
1245 MULTILIB_CFLAGS
="$(MULTILIB_CFLAGS)" T
="t" t
$${f}; \
1246 mv t
$${f} $(dir)/$${f}; \
1250 # Compile two additional files that are linked with every program
1251 # linked using GCC on systems using COFF or ELF, for the sake of C++
1253 $(T
)crtbegin.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1254 defaults.h frame.h gbl-ctors.h
1255 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1256 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1257 -c
$(srcdir)/crtstuff.c
-DCRT_BEGIN
-o
$(T
)crtbegin
$(objext
)
1259 $(T
)crtend.o
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1260 defaults.h frame.h gbl-ctors.h
1261 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(MULTILIB_CFLAGS
) -g0 \
1262 -finhibit-size-directive
-fno-inline-functions
-fno-exceptions
$(CRTSTUFF_T_CFLAGS
) \
1263 -c
$(srcdir)/crtstuff.c
-DCRT_END
-o
$(T
)crtend
$(objext
)
1265 # On some systems we also want to install versions of these files
1266 # compiled using PIC for use in shared libraries.
1267 crtbeginS.o crtendS.o
: s-crtS
; @true
1269 s-crtS
: crtstuff.c
$(GCC_PASSES
) $(CONFIG_H
) \
1270 defaults.h frame.h gbl-ctors.h
1271 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1272 -DCRT_BEGIN
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1273 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
1274 mv crtstuff
$(objext
) crtbeginS
$(objext
)
1275 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(INCLUDES
) $(CRTSTUFF_T_CFLAGS_S
) \
1276 -DCRT_END
-DCRTSTUFFS_O
-finhibit-size-directive
-fno-inline-functions \
1277 -fno-exceptions
-g0
-c
$(srcdir)/crtstuff.c
-o crtendS
$(objext
)
1280 # Compile the start modules crt0.o and mcrt0.o that are linked with every program
1281 crt0.o
: s-crt0
; @true
1282 mcrt0.o
: s-crt0
; @true
1284 s-crt0
: $(CRT0_S
) $(MCRT0_S
) $(GCC_PASSES
) $(CONFIG_H
)
1285 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1286 -o crt0.o
-c
$(CRT0_S
)
1287 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(CRT0STUFF_T_CFLAGS
) \
1288 -o mcrt0.o
-c
$(MCRT0_S
)
1291 # Compiling object files from source files.
1293 # Note that dependencies on obstack.h are not written
1294 # because that file is not part of GCC.
1296 # C language specific files.
1298 c-parse.o
: $(srcdir)/c-parse.c
$(CONFIG_H
) $(TREE_H
) c-lex.h \
1299 $(srcdir)/c-parse.h c-tree.h input.h flags.h system.h toplev.h
1300 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/c-parse.c
1301 $(srcdir)/c-parse.h
: $(srcdir)/c-parse.c
1302 $(srcdir)/c-parse.c
: $(srcdir)/c-parse.y
1303 cd
$(srcdir); $(BISON
) $(BISONFLAGS
) -d c-parse.y
-o c-parse.c
1304 $(srcdir)/c-parse.y
: c-parse.in
1305 echo
'/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y
1306 sed
-e
"/^ifobjc$$/,/^end ifobjc$$/d" \
1307 -e
"/^ifc$$/d" -e
"/^end ifc$$/d" \
1308 $(srcdir)/c-parse.in
>>tmp-c-parse.y
1309 $(srcdir)/move-if-change tmp-c-parse.y
$(srcdir)/c-parse.y
1311 $(srcdir)/c-gperf.h
: c-parse.gperf
1312 gperf
-L KR-C
-F
', 0, 0' -p
-j1
-i
1 -g
-o
-t
-G
-N is_reserved_word \
1313 -k1
,3,$$ $(srcdir)/c-parse.gperf
>tmp-gperf.h
1314 $(srcdir)/move-if-change tmp-gperf.h
$(srcdir)/c-gperf.h
1316 c-decl.o
: c-decl.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h flags.h \
1318 c-typeck.o
: c-typeck.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h \
1319 intl.h output.h
$(EXPR_H
) $(RTL_H
) toplev.h
1320 c-lang.o
: c-lang.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h toplev.h \
1322 c-lex.o
: c-lex.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-lex.h c-tree.h \
1323 $(srcdir)/c-parse.h input.h intl.h flags.h
$(srcdir)/c-gperf.h c-pragma.h \
1324 toplev.h output.h mbchar.h
1325 c-aux-info.o
: c-aux-info.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h flags.h
1326 c-convert.o
: c-convert.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h
1327 c-pragma.o
: c-pragma.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) except.h \
1328 function.h defaults.h c-pragma.h toplev.h
1329 c-iterate.o
: c-iterate.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) c-tree.h \
1330 flags.h toplev.h
$(EXPR_H
)
1331 mbchar.o
: mbchar.c
$(CONFIG_H
) system.h mbchar.h
1332 graph.o
: graph.c
$(CONFIG_H
) system.h toplev.h flags.h output.h
$(RTL_H
) \
1333 hard-reg-set.h
$(BASIC_BLOCK_H
)
1334 sbitmap.o
: sbitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
)
1336 COLLECT2_OBJS
= collect2.o tlink.o hash.o intl.o underscore.o version.o
1337 collect2
$(exeext
): $(COLLECT2_OBJS
) $(LIBDEPS
)
1338 # Don't try modifying collect2 (aka ld) in place--it might be linking this.
1339 -rm -f collect2
$(exeext
)
1340 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(COLLECT2_OBJS
) $(LIBS
)
1342 collect2.o
: collect2.c
$(CONFIG_H
) system.h gstab.h intl.h \
1343 $(srcdir)/..
/include/obstack.h
$(DEMANGLE_H
) collect2.h
1344 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1345 -DTARGET_MACHINE
=\"$(target_alias
)\" $(MAYBE_USE_COLLECT2
) \
1346 -c
`echo $(srcdir)/collect2.c | sed 's,^\./,,'`
1348 tlink.o
: tlink.c
$(DEMANGLE_H
) hash.h
$(CONFIG_H
) system.h toplev.h collect2.h
1349 hash.o
: hash.c hash.h system.h toplev.h
1351 vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
$(CONFIG_H
) system.h
1353 $(LN_S
) $(srcdir)/..
/libiberty
/vfprintf.c vfprintf.c
1354 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) vfprintf.c
1356 splay-tree.o
: $(srcdir)/..
/libiberty
/splay-tree.c \
1357 $(srcdir)/..
/include/splay-tree.h
$(srcdir)/..
/include/libiberty.h
1359 $(LN_S
) $(srcdir)/..
/libiberty
/splay-tree.c splay-tree.c
1360 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) splay-tree.c
1362 underscore.c
: s-under
; @true
1364 s-under
: $(GCC_PASSES
)
1365 echo
"int xxy_us_dummy;" >tmp-dum.c
1366 $(GCC_FOR_TARGET
) -S tmp-dum.c
1367 echo
'/*WARNING: This file is automatically generated!*/' >tmp-under.c
1368 if grep _xxy_us_dummy tmp-dum.s
> /dev
/null
; then \
1369 echo
"int prepends_underscore = 1;" >>tmp-under.c
; \
1371 echo
"int prepends_underscore = 0;" >>tmp-under.c
; \
1373 $(srcdir)/move-if-change tmp-under.c underscore.c
1374 -rm -f tmp-dum.c tmp-dum.s
1377 # A file used by all variants of C.
1379 c-common.o
: c-common.c
$(CONFIG_H
) system.h
$(TREE_H
) c-tree.h c-lex.h \
1380 flags.h toplev.h output.h c-pragma.h
$(RTL_H
)
1382 # Language-independent files.
1385 -DSTANDARD_STARTFILE_PREFIX
=\"$(libdir)/\" \
1386 -DSTANDARD_EXEC_PREFIX
=\"$(libdir)/gcc-lib
/\" \
1387 -DDEFAULT_TARGET_VERSION
=\"$(version
)\" \
1388 -DDEFAULT_TARGET_MACHINE
=\"$(target_alias
)\" \
1389 -DTOOLDIR_BASE_PREFIX
=\"$(exec_prefix)/\"
1390 gcc.o
: gcc.c
$(CONFIG_H
) system.h intl.h multilib.h \
1391 Makefile
$(lang_specs_files
) prefix.h
1392 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1394 -c
`echo $(srcdir)/gcc.c | sed 's,^\./,,'`
1396 tree-check.h
: s-check
; @true
1397 s-check
: gencheck
$(srcdir)/move-if-change
1398 .
/gencheck
> tmp-check.h
1399 $(srcdir)/move-if-change tmp-check.h tree-check.h
1402 gencheck
: gencheck.o
$(lang_tree_files
) $(HOST_LIBDEPS
)
1403 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1404 gencheck.o
$(HOST_LIBS
)
1406 gencheck.o
: gencheck.c tree.def
$(CONFIG_H
) hconfig.h system.h
1407 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) \
1408 $(srcdir)/gencheck.c
1410 dumpvers
: dumpvers.c
1412 version.o
: version.c
1413 obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
$(CONFIG_H
)
1415 $(LN_S
) $(srcdir)/..
/libiberty
/obstack.c obstack.c
1416 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) obstack.c
1418 prefix.o
: prefix.c
$(CONFIG_H
) system.h Makefile
prefix.h
1419 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1420 -DPREFIX
=\"$(prefix)\" \
1421 -c
`echo $(srcdir)/prefix.c | sed 's,^\./,,'`
1423 convert.o
: convert.c
$(CONFIG_H
) $(TREE_H
) flags.h convert.h toplev.h
1425 tree.o
: tree.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h function.h toplev.h except.h
1426 print-tree.o
: print-tree.c
$(CONFIG_H
) system.h
$(TREE_H
)
1427 stor-layout.o
: stor-layout.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h \
1428 function.h
$(EXPR_H
) $(RTL_H
) toplev.h except.h
1429 fold-const.o
: fold-const.c
$(CONFIG_H
) system.h
$(TREE_H
) flags.h toplev.h \
1431 toplev.o
: toplev.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) \
1432 flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
1433 insn-codes.h insn-config.h intl.h
$(RECOG_H
) Makefile toplev.h dwarfout.h \
1434 dwarf2out.h sdbout.h dbxout.h
$(EXPR_H
) $(BASIC_BLOCK_H
) \
1435 $(lang_options_files
)
1436 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(MAYBE_USE_COLLECT2
) \
1437 -DTARGET_NAME
=\"$(target_alias
)\" \
1438 -c
`echo $(srcdir)/toplev.c | sed 's,^\./,,'`
1440 rtl.o
: rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1442 print-rtl.o
: print-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h basic-block.h
1443 rtlanal.o
: rtlanal.c
$(CONFIG_H
) system.h
$(RTL_H
)
1445 varasm.o
: varasm.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h \
1446 function.h defaults.h
$(EXPR_H
) hard-reg-set.h
$(REGS_H
) \
1447 xcoffout.h output.h c-pragma.h toplev.h except.h dbxout.h sdbout.h
1448 function.o
: function.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1449 function.h insn-flags.h insn-codes.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1450 insn-config.h
$(RECOG_H
) output.h toplev.h except.h
1451 stmt.o
: stmt.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1452 insn-flags.h insn-config.h insn-codes.h hard-reg-set.h
$(EXPR_H
) except.h \
1453 loop.h
$(RECOG_H
) toplev.h output.h varray.h
1454 except.o
: except.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1455 function.h insn-flags.h
$(EXPR_H
) $(REGS_H
) hard-reg-set.h \
1456 insn-config.h
$(RECOG_H
) output.h except.h toplev.h
1457 expr.o
: expr.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h function.h \
1458 $(REGS_H
) insn-flags.h insn-codes.h
$(EXPR_H
) insn-config.h
$(RECOG_H
) output.h \
1459 typeclass.h hard-reg-set.h toplev.h hard-reg-set.h except.h
1460 calls.o
: calls.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h
$(EXPR_H
) \
1461 insn-flags.h
$(REGS_H
) toplev.h output.h
1462 expmed.o
: expmed.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1463 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) real.h
1464 explow.o
: explow.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1465 hard-reg-set.h insn-config.h
$(EXPR_H
) $(RECOG_H
) insn-flags.h insn-codes.h
1466 optabs.o
: optabs.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1467 insn-flags.h insn-config.h insn-codes.h
$(EXPR_H
) $(RECOG_H
) reload.h
1468 dbxout.o
: dbxout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h
$(REGS_H
) \
1469 insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h dbxout.h \
1471 sdbout.o
: sdbout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) flags.h except.h \
1472 function.h
$(EXPR_H
) output.h hard-reg-set.h
$(REGS_H
) defaults.h real.h \
1473 insn-config.h
$(srcdir)/..
/include/obstack.h xcoffout.h c-pragma.h \
1475 dwarfout.o
: dwarfout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf.h \
1476 flags.h insn-config.h reload.h output.h defaults.h toplev.h dwarfout.h
1477 dwarf2out.o
: dwarf2out.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) dwarf2.h \
1478 flags.h insn-config.h reload.h output.h defaults.h \
1479 hard-reg-set.h
$(REGS_H
) $(EXPR_H
) toplev.h dwarf2out.h dyn-string.h
1480 xcoffout.o
: xcoffout.c
$(CONFIG_H
) system.h
$(TREE_H
) $(RTL_H
) xcoffout.h \
1481 flags.h toplev.h output.h dbxout.h
1482 emit-rtl.o
: emit-rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1483 except.h function.h
$(REGS_H
) insn-config.h
$(RECOG_H
) real.h \
1484 $(EXPR_H
) $(srcdir)/..
/include/obstack.h hard-reg-set.h bitmap.h
1485 real.o
: real.c
$(CONFIG_H
) system.h
$(TREE_H
) toplev.h
1486 getpwd.o
: getpwd.c
$(CONFIG_H
) system.h
1488 integrate.o
: integrate.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h \
1489 integrate.h insn-flags.h insn-config.h
$(EXPR_H
) real.h
$(REGS_H
) \
1490 intl.h function.h output.h
$(RECOG_H
) except.h toplev.h
1492 jump.o
: jump.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h
$(REGS_H
) \
1493 insn-config.h insn-flags.h
$(RECOG_H
) $(EXPR_H
) real.h except.h \
1494 toplev.h insn-attr.h
1495 stupid.o
: stupid.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h \
1496 $(BASIC_BLOCK_H
) insn-config.h reload.h flags.h toplev.h
1498 cse.o
: cse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1499 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) toplev.h output.h
1500 gcse.o
: gcse.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1501 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
) output.h
1502 resource.o
: resource.c
$(CONFIG_H
) $(RTL_H
) hard-reg-set.h system.h \
1503 $(BASIC_BLOCK_H
) $(REGS_H
) flags.h output.h resource.h
1504 lcm.o
: lcm.c
$(CONFIG_H
) system.h
$(RTL_H
) $(REGS_H
) hard-reg-set.h flags.h \
1505 real.h insn-config.h
$(RECOG_H
) $(EXPR_H
) $(BASIC_BLOCK_H
)
1506 profile.o
: profile.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-flags.h \
1507 gcov-io.h
$(TREE_H
) output.h
$(REGS_H
) toplev.h insn-config.h
1508 loop.o
: loop.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h loop.h insn-config.h \
1509 insn-flags.h
$(REGS_H
) hard-reg-set.h
$(RECOG_H
) $(EXPR_H
) real.h \
1511 unroll.o
: unroll.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1512 integrate.h
$(REGS_H
) $(RECOG_H
) flags.h
$(EXPR_H
) loop.h toplev.h varray.h
1513 flow.o
: flow.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h insn-config.h \
1514 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h output.h toplev.h recog.h \
1516 combine.o
: combine.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1517 insn-config.h insn-flags.h insn-codes.h insn-attr.h
$(REGS_H
) $(EXPR_H
) \
1518 $(BASIC_BLOCK_H
) $(RECOG_H
) real.h hard-reg-set.h toplev.h
1519 regclass.o
: regclass.c
$(CONFIG_H
) system.h
$(RTL_H
) hard-reg-set.h flags.h \
1520 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h
$(RECOG_H
) reload.h real.h toplev.h \
1522 local-alloc.o
: local-alloc.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1523 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h
$(RECOG_H
) output.h \
1524 insn-attr.h toplev.h
1525 bitmap.o
: bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h
$(BASIC_BLOCK_H
) \
1527 global.o
: global.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h reload.h \
1528 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h insn-config.h output.h toplev.h
1529 varray.o
: varray.c
$(CONFIG_H
) system.h varray.h
$(RTL_H
) $(TREE_H
) bitmap.h
1531 reload.o
: reload.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h output.h
$(EXPR_H
) \
1532 reload.h
$(RECOG_H
) hard-reg-set.h insn-config.h insn-codes.h
$(REGS_H
) \
1534 reload1.o
: reload1.c
$(CONFIG_H
) system.h
$(RTL_H
) real.h flags.h
$(EXPR_H
) \
1535 reload.h
$(REGS_H
) hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
1536 $(BASIC_BLOCK_H
) $(RECOG_H
) output.h toplev.h
1537 caller-save.o
: caller-save.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h \
1538 $(REGS_H
) hard-reg-set.h insn-config.h
$(BASIC_BLOCK_H
) \
1539 $(RECOG_H
) reload.h
$(EXPR_H
) toplev.h
1540 reorg.o
: reorg.c
$(CONFIG_H
) system.h
$(RTL_H
) conditions.h hard-reg-set.h \
1541 $(BASIC_BLOCK_H
) $(REGS_H
) insn-config.h insn-attr.h \
1542 insn-flags.h
$(RECOG_H
) flags.h output.h
$(EXPR_H
)
1543 alias.o
: alias.c
$(CONFIG_H
) system.h
$(RTL_H
) flags.h hard-reg-set.h \
1544 $(REGS_H
) toplev.h output.h
$(EXPR_H
)
1545 regmove.o
: regmove.c
$(CONFIG_H
) system.h
$(RTL_H
) insn-config.h \
1546 $(RECOG_H
) output.h reload.h
$(REGS_H
) hard-reg-set.h flags.h \
1547 $(EXPR_H
) insn-flags.h
$(BASIC_BLOCK_H
) toplev.h
1548 $(SCHED_PREFIX
)sched.o
: $(SCHED_PREFIX
)sched.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1549 $(BASIC_BLOCK_H
) $(REGS_H
) hard-reg-set.h flags.h insn-config.h \
1550 insn-attr.h toplev.h recog.h
1551 final.o
: final.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) flags.h intl.h \
1552 $(REGS_H
) $(RECOG_H
) conditions.h insn-config.h insn-attr.h except.h real.h \
1553 output.h hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h \
1554 defaults.h toplev.h reload.h dwarfout.h dwarf2out.h sdbout.h dbxout.h
1555 recog.o
: recog.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1556 $(REGS_H
) $(RECOG_H
) hard-reg-set.h flags.h insn-config.h insn-attr.h \
1557 insn-flags.h insn-codes.h real.h toplev.h
1558 reg-stack.o
: reg-stack.c
$(CONFIG_H
) system.h
$(RTL_H
) $(TREE_H
) recog.h \
1559 $(REGS_H
) hard-reg-set.h flags.h insn-config.h insn-flags.h toplev.h
1560 dyn-string.o
: dyn-string.c dyn-string.h
$(CONFIG_H
) system.h
1562 $(out_object_file
): $(out_file
) $(CONFIG_H
) $(TREE_H
) \
1563 $(RTL_H
) $(REGS_H
) hard-reg-set.h real.h insn-config.h conditions.h \
1564 insn-flags.h output.h insn-attr.h insn-codes.h system.h toplev.h
1565 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(out_file
)
1567 # Build auxiliary files that support ecoff format.
1568 mips-tfile
: mips-tfile.o version.o
$(LIBDEPS
)
1569 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tfile.o version.o
$(LIBS
)
1571 mips-tfile.o
: mips-tfile.c
$(CONFIG_H
) $(RTL_H
) system.h machmode.h
1573 mips-tdump
: mips-tdump.o version.o
$(LIBDEPS
)
1574 $(CC
) $(CFLAGS
) $(LDFLAGS
) -o
$@ mips-tdump.o version.o
$(LIBS
)
1576 mips-tdump.o
: mips-tdump.c
$(CONFIG_H
) $(RTL_H
) system.h
1578 # Build file to support OSF/rose half-pic format.
1579 halfpic.o
: halfpic.c
$(CONFIG_H
) $(RTL_H
) $(TREE_H
) system.h
1581 # Normally this target is not used; but it is used if you
1582 # define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
1583 # from the GNU Emacs distribution.
1584 alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1586 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c alloca.c
1587 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) $(ALLOCA_FLAGS
) \
1588 -c
`echo alloca.c | sed 's,^\./,,'`
1591 # Generate header and source files from the machine description,
1594 .PRECIOUS
: insn-config.h insn-flags.h insn-codes.h \
1595 insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
1596 insn-attr.h insn-attrtab.c
1598 # The following pair of rules has this effect:
1599 # genconfig is run only if the md has changed since genconfig was last run;
1600 # but the file insn-config.h is touched only when its contents actually change.
1602 # Each of the other insn-* files is handled by a similar pair of rules.
1604 # This causes an anomaly in the results of make -n
1605 # because insn-* is older than s-*
1606 # and thus make -n thinks that insn-* will be updated
1607 # and force recompilation of things that depend on it.
1608 # We use move-if-change precisely to avoid such recompilation.
1609 # But there is no way to teach make -n that it will be avoided.
1611 # Each of the insn-*.[ch] rules has a semicolon at the end,
1612 # for otherwise the system Make on SunOS 4.1 never tries
1613 # to recompile insn-*.o. To avoid problems and extra noise from
1614 # versions of make which don't like empty commands (nothing after the
1615 # trailing `;'), we call true for each.
1617 insn-config.h
: s-config
; @true
1618 s-config
: $(md_file
) genconfig
$(srcdir)/move-if-change
1619 .
/genconfig
$(md_file
) > tmp-config.h
1620 $(srcdir)/move-if-change tmp-config.h insn-config.h
1623 insn-flags.h
: s-flags
; @true
1624 s-flags
: $(md_file
) genflags
$(srcdir)/move-if-change
1625 .
/genflags
$(md_file
) > tmp-flags.h
1626 $(srcdir)/move-if-change tmp-flags.h insn-flags.h
1629 insn-codes.h
: s-codes
; @true
1630 s-codes
: $(md_file
) gencodes
$(srcdir)/move-if-change
1631 .
/gencodes
$(md_file
) > tmp-codes.h
1632 $(srcdir)/move-if-change tmp-codes.h insn-codes.h
1635 insn-emit.o
: insn-emit.c
$(CONFIG_H
) $(RTL_H
) $(EXPR_H
) real.h output.h \
1636 insn-config.h insn-flags.h insn-codes.h system.h reload.h recog.h
1637 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-emit.c
1639 insn-emit.c
: s-emit
; @true
1640 s-emit
: $(md_file
) genemit
$(srcdir)/move-if-change
1641 .
/genemit
$(md_file
) > tmp-emit.c
1642 $(srcdir)/move-if-change tmp-emit.c insn-emit.c
1645 insn-recog.o
: insn-recog.c
$(CONFIG_H
) $(RTL_H
) insn-config.h
$(RECOG_H
) \
1646 real.h output.h flags.h system.h
1647 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-recog.c
1649 insn-recog.c
: s-recog
; @true
1650 s-recog
: $(md_file
) genrecog
$(srcdir)/move-if-change
1651 .
/genrecog
$(md_file
) > tmp-recog.c
1652 $(srcdir)/move-if-change tmp-recog.c insn-recog.c
1655 insn-opinit.o
: insn-opinit.c
$(CONFIG_H
) $(RTL_H
) insn-codes.h insn-flags.h \
1656 insn-config.h flags.h
$(RECOG_H
) $(EXPR_H
) reload.h system.h
1657 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-opinit.c
1659 insn-opinit.c
: s-opinit
; @true
1660 s-opinit
: $(md_file
) genopinit
$(srcdir)/move-if-change
1661 .
/genopinit
$(md_file
) > tmp-opinit.c
1662 $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
1665 insn-extract.o
: insn-extract.c
$(CONFIG_H
) $(RTL_H
) system.h toplev.h \
1666 insn-config.h recog.h
1667 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-extract.c
1669 insn-extract.c
: s-extract
; @true
1670 s-extract
: $(md_file
) genextract
$(srcdir)/move-if-change
1671 .
/genextract
$(md_file
) > tmp-extract.c
1672 $(srcdir)/move-if-change tmp-extract.c insn-extract.c
1675 insn-peep.o
: insn-peep.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) output.h real.h \
1676 system.h insn-config.h recog.h
1677 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-peep.c
1679 insn-peep.c
: s-peep
; @true
1680 s-peep
: $(md_file
) genpeep
$(srcdir)/move-if-change
1681 .
/genpeep
$(md_file
) > tmp-peep.c
1682 $(srcdir)/move-if-change tmp-peep.c insn-peep.c
1685 insn-attrtab.o
: insn-attrtab.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h \
1686 output.h insn-attr.h insn-config.h system.h toplev.h
1687 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-attrtab.c
1689 insn-attr.h
: s-attr
; @true
1690 s-attr
: $(md_file
) genattr
$(srcdir)/move-if-change
1691 .
/genattr
$(md_file
) > tmp-attr.h
1692 $(srcdir)/move-if-change tmp-attr.h insn-attr.h
1695 insn-attrtab.c
: s-attrtab
; @true
1696 s-attrtab
: $(md_file
) genattrtab
$(srcdir)/move-if-change
1697 if cmp
-s
$(PREMADE_ATTRTAB_MD
) $(md_file
); \
1699 echo Using
$(PREMADE_ATTRTAB
); \
1700 cp
$(PREMADE_ATTRTAB
) tmp-attrtab.c
; \
1702 .
/genattrtab
$(md_file
) > tmp-attrtab.c
; \
1704 $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
1707 insn-output.o
: insn-output.c
$(CONFIG_H
) $(RTL_H
) $(REGS_H
) real.h conditions.h \
1708 hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h
$(RECOG_H
) \
1709 insn-codes.h system.h
1710 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c insn-output.c
1712 insn-output.c
: s-output
; @true
1713 s-output
: $(md_file
) genoutput
$(srcdir)/move-if-change
1714 .
/genoutput
$(md_file
) > tmp-output.c
1715 $(srcdir)/move-if-change tmp-output.c insn-output.c
1718 genrtl.o
: genrtl.c
$(CONFIG_H
) $(RTL_H
) system.h
1719 genrtl.c genrtl.h
: s-genrtl
1720 @true
# force gnu make to recheck modification times.
1722 s-genrtl
: gengenrtl
$(srcdir)/move-if-change
$(RTL_BASE_H
)
1723 .
/gengenrtl tmp-genrtl.h tmp-genrtl.c
1724 $(srcdir)/move-if-change tmp-genrtl.h genrtl.h
1725 $(srcdir)/move-if-change tmp-genrtl.c genrtl.c
1729 # Compile the programs that generate insn-* from the machine description.
1730 # They are compiled with $(HOST_CC), and associated libraries,
1731 # since they need to run on this machine
1732 # even if GCC is being compiled to run on some other machine.
1734 # $(CONFIG_H) is omitted from the deps of the gen*.o
1735 # because these programs don't really depend on anything
1736 # about the target machine. They do depend on config.h itself,
1737 # since that describes the host machine.
1739 # Pass the md file through cpp if the target requests it.
1740 $(MD_FILE
): $(MD_DEPS
)
1742 $(MD_CPP
) $(MD_CPPFLAGS
) $(md_file
) | sed
's/^# /; /g' > tmp-
$@
1745 genconfig
: genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1746 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1747 genconfig.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1749 genconfig.o
: genconfig.c
$(RTL_H
) $(build_xm_file
) system.h
1750 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genconfig.c
1752 genflags
: genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1753 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1754 genflags.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1756 genflags.o
: genflags.c
$(RTL_H
) $(build_xm_file
) system.h
1757 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genflags.c
1759 gencodes
: gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1760 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1761 gencodes.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1763 gencodes.o
: gencodes.c
$(RTL_H
) $(build_xm_file
) system.h
1764 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gencodes.c
1766 genemit
: genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1767 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1768 genemit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1770 genemit.o
: genemit.c
$(RTL_H
) $(build_xm_file
) system.h
1771 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genemit.c
1773 genopinit
: genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1774 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1775 genopinit.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1777 genopinit.o
: genopinit.c
$(RTL_H
) $(build_xm_file
) system.h
1778 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genopinit.c
1780 genrecog
: genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1781 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1782 genrecog.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1784 genrecog.o
: genrecog.c
$(RTL_H
) $(build_xm_file
) system.h
1785 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genrecog.c
1787 genextract
: genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1788 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1789 genextract.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1791 genextract.o
: genextract.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1792 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genextract.c
1794 genpeep
: genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1795 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1796 genpeep.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1798 genpeep.o
: genpeep.c
$(RTL_H
) $(build_xm_file
) system.h
1799 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genpeep.c
1801 genattr
: genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1802 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1803 genattr.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1805 genattr.o
: genattr.c
$(RTL_H
) $(build_xm_file
) system.h
1806 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattr.c
1808 genattrtab
: genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBDEPS
)
1809 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1810 genattrtab.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_RTLANAL
) $(HOST_LIBS
)
1812 genattrtab.o
: genattrtab.c
$(RTL_H
) $(build_xm_file
) system.h insn-config.h
1813 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genattrtab.c
1815 genoutput
: genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBDEPS
)
1816 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1817 genoutput.o
$(HOST_RTL
) $(HOST_PRINT
) $(HOST_LIBS
)
1819 genoutput.o
: genoutput.c
$(RTL_H
) $(build_xm_file
) system.h
1820 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/genoutput.c
1822 gengenrtl
: gengenrtl.o
$(HOST_LIBDEPS
)
1823 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ \
1824 gengenrtl.o
$(HOST_LIBS
)
1826 gengenrtl.o
: gengenrtl.c
$(RTL_BASE_H
) system.h
1827 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gengenrtl.c
1830 # Compile the libraries to be used by gen*.
1831 # If we are not cross-building, gen* use the same .o's that cc1 will use,
1832 # and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
1833 # with the rules for rtl.o, alloca.o, etc.
1834 $(HOST_PREFIX_1
)rtl.o
: $(srcdir)/rtl.c
$(CONFIG_H
) system.h
$(RTL_H
) bitmap.h
1835 rm -f
$(HOST_PREFIX
)rtl.c
1836 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtl.c
> $(HOST_PREFIX
)rtl.c
1837 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtl.c
1839 $(HOST_PREFIX_1
)print-rtl.o
: $(srcdir)/print-rtl.c
$(CONFIG_H
) $(RTL_H
) \
1840 bitmap.h basic-block.h
1841 rm -f
$(HOST_PREFIX
)print-rtl.c
1842 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c
> $(HOST_PREFIX
)print-rtl.c
1843 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)print-rtl.c
1845 $(HOST_PREFIX_1
)bitmap.o
: $(srcdir)/bitmap.c
$(CONFIG_H
) system.h
$(RTL_H
) \
1846 flags.h
$(BASIC_BLOCK_H
) $(REGS_H
)
1847 rm -f
$(HOST_PREFIX
)bitmap.c
1848 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/bitmap.c
> $(HOST_PREFIX
)bitmap.c
1849 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)bitmap.c
1851 $(HOST_PREFIX_1
)rtlanal.o
: $(srcdir)/rtlanal.c
$(CONFIG_H
) $(RTL_H
)
1852 rm -f
$(HOST_PREFIX
)rtlanal.c
1853 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c
> $(HOST_PREFIX
)rtlanal.c
1854 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)rtlanal.c
1856 $(HOST_PREFIX_1
)alloca.o
: $(srcdir)/..
/libiberty
/alloca.c
1857 rm -f
$(HOST_PREFIX
)alloca.c
1858 $(LN_S
) $(srcdir)/..
/libiberty
/alloca.c
$(HOST_PREFIX
)alloca.c
1859 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)alloca.c
1861 $(HOST_PREFIX_1
)obstack.o
: $(srcdir)/..
/libiberty
/obstack.c
1862 rm -f
$(HOST_PREFIX
)obstack.c
1863 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/obstack.c
> $(HOST_PREFIX
)obstack.c
1864 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)obstack.c
1866 $(HOST_PREFIX_1
)vfprintf.o
: $(srcdir)/..
/libiberty
/vfprintf.c
1867 rm -f
$(HOST_PREFIX
)vfprintf.c
1868 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/..
/libiberty
/vfprintf.c
> $(HOST_PREFIX
)vfprintf.c
1869 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)vfprintf.c
1871 $(HOST_PREFIX_1
)doprint.o
: doprint.c
1872 rm -f
$(HOST_PREFIX
)doprint.c
1873 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/doprint.c
> $(HOST_PREFIX
)doprint.c
1874 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)doprint.c
1876 $(HOST_PREFIX_1
)malloc.o
: malloc.c
1877 rm -f
$(HOST_PREFIX
)malloc.c
1878 sed
-e
's/config[.]h/hconfig.h/' $(srcdir)/malloc.c
> $(HOST_PREFIX
)malloc.c
1879 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(HOST_PREFIX
)malloc.c
1881 # This satisfies the dependency that we get if you cross-compile a compiler
1882 # that does not need to compile alloca, malloc or whatever.
1884 touch
$(HOST_PREFIX_1
)
1888 # Remake internationalization support.
1890 intl.o
: intl.c intl.h gansidecl.h Makefile
1891 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1892 -DLOCALEDIR
=\"$(localedir
)\" \
1893 -c
`echo $(srcdir)/intl.c | sed 's,^\./,,'`
1895 # This is needed to when doing a partial build after a `make clean'.
1896 # libintl.a does not depend on intl.all,
1897 # as that would force a lot of recompiling.
1898 $(top_builddir
)/intl
/libintl.a
:
1899 @echo
"$(MAKE) intl.all"
1900 @
$(MAKE
) $(FLAGS_TO_PASS
) intl.
all
1902 # Make sure all the headers are there for xgettext to scan.
1903 # FIXME: extend the language interface
1904 # so that we needn't jump into language build internals like this.
1905 intl.
all intl.
install intl.distdir
: \
1906 $(srcdir)/c-gperf.h \
1907 $(srcdir)/c-parse.c
$(srcdir)/c-parse.h
$(srcdir)/cexp.c \
1908 $(srcdir)/cp
/parse.c
$(srcdir)/objc
/objc-parse.c
1909 $(srcdir)/cp
/parse.c
:
1910 @cp_srcdir
=`sed -n 's/^srcdir[ ]*=[ ]*//p' cp/Makefile` && \
1911 echo
"cd cp && $(MAKE) $$cp_srcdir/parse.c" && \
1913 $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $(CXX_FLAGS_TO_PASS
) \
1916 intl.
all intl.
install intl.
uninstall intl.distdir \
1917 intl.
mostlyclean intl.
clean intl.
distclean intl.maintainer-clean
:
1918 @for d in
$(INTL_SUBDIRS
); do \
1919 target
=`expr $@ : 'intl.\(.*\)'` && \
1920 echo
"(cd $$d && $(MAKE) $$target)" && \
1921 (cd
$$d && AWK
='$(AWK)' $(MAKE
) $(SUBDIR_FLAGS_TO_PASS
) $$target); \
1924 # intl.distdir doesn't copy the intl makefiles (since they aren't distributed),
1925 # but we need them for the `make extraclean' in distdir-finish.
1927 for d in
$(INTL_SUBDIRS
); do \
1928 ln
$$d/Makefile tmp
/$$d || cp
$$d/Makefile tmp
/$$d || exit
; \
1931 # Remake cpp and protoize.
1933 # Making the preprocessor
1934 cpp$(exeext
): $(CCCP
)$(exeext
)
1936 $(LN
) $(CCCP
)$(exeext
) cpp$(exeext
)
1937 CCCP_OBJS
= cccp.o cexp.o intl.o
prefix.o version.o @extra_cpp_objs@ mbchar.o
1938 cccp
$(exeext
): $(CCCP_OBJS
) $(LIBDEPS
)
1939 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@
$(CCCP_OBJS
) $(LIBS
)
1940 cexp.o
: $(srcdir)/cexp.c
$(CONFIG_H
) system.h
1941 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) -c
$(srcdir)/cexp.c
1942 $(srcdir)/cexp.c
: $(srcdir)/cexp.y
1943 cd
$(srcdir); $(BISON
) -o cexp.c cexp.y
1945 # We use $(libsubdir)/$(unlibsubdir) to match the
1946 # -iprefix argument which gcc will pass if GCC_EXEC_PREFIX is used.
1947 cccp.o
: cccp.c
$(CONFIG_H
) intl.h pcp.h version.c config.status system.h \
1948 mbchar.h
prefix.h Makefile.in
1949 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1950 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1951 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1952 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1953 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1954 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
1955 -c
`echo $(srcdir)/cccp.c | sed 's,^\./,,'`
1957 LIBCPP_OBJS
= cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o cppfiles.o \
1958 cppinit.o cppulp.o
prefix.o version.o mbchar.o @extra_cpp_objs@
1960 # All the other archives built/used by this makefile are for targets. This
1961 # one is strictly for the host.
1963 libcpp.a
: $(LIBCPP_OBJS
)
1964 $(AR
) $(AR_FLAGS
) libcpp.a
$(LIBCPP_OBJS
)
1965 if
$(RANLIB_TEST
) ; then
$(RANLIB
) libcpp.a
; else true
; fi
1967 cppmain
$(exeext
): cppmain.o libcpp.a
$(LIBDEPS
)
1968 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o cppmain
$(exeext
) cppmain.o \
1971 cppmain.o
: cppmain.c
$(CONFIG_H
) cpplib.h intl.h system.h
1973 cppulp.o
: cppulp.c
$(CONFIG_H
) system.h output.h
1974 cpplib.o
: cpplib.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1975 cpphash.o
: cpphash.c
$(CONFIG_H
) cpplib.h intl.h system.h cpphash.h
1976 cppalloc.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h
1977 cpperror.o
: cpperror.c
$(CONFIG_H
) cpplib.h intl.h system.h
1978 cppexp.o
: cppexp.c
$(CONFIG_H
) cpplib.h intl.h system.h
1979 cppfiles.o
: cppfiles.c
$(CONFIG_H
) cpplib.h intl.h system.h
1981 cppinit.o
: cppalloc.c
$(CONFIG_H
) cpplib.h intl.h system.h \
1982 cpphash.h
prefix.h output.h Makefile
1983 $(CC
) $(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
1984 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
1985 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
1986 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
1987 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
1988 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
1989 -c
`echo $(srcdir)/cppinit.c | sed 's,^\./,,'`
1991 # Note for the stamp targets, we run the program `true' instead of
1992 # having an empty command (nothing following the semicolon).
1994 proto
: config.status protoize
$(exeext
) unprotoize
$(exeext
) SYSCALLS.c.X
1996 PROTO_OBJS
= getpwd.o intl.o version.o
1998 protoize
$(exeext
): protoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
1999 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ protoize.o
$(PROTO_OBJS
) $(LIBS
)
2001 unprotoize
$(exeext
): unprotoize.o
$(PROTO_OBJS
) $(LIBDEPS
)
2002 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) -o
$@ unprotoize.o
$(PROTO_OBJS
) $(LIBS
)
2004 protoize.o
: protoize.c
$(srcdir)/..
/include/getopt.h
$(CONFIG_H
) system.h \
2006 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2007 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2008 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2009 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2010 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2011 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2012 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2013 $(srcdir)/protoize.c
2015 unprotoize.o
: unprotoize.c protoize.c
$(srcdir)/..
/include/getopt.h \
2016 $(CONFIG_H
) system.h Makefile
2017 $(CC
) -c
$(ALL_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2018 -DGCC_INCLUDE_DIR
=\"$(libsubdir
)/include\" \
2019 -DGPLUSPLUS_INCLUDE_DIR
=\"$(gcc_gxx_include_dir
)\" \
2020 -DCROSS_INCLUDE_DIR
=\"$(gcc_tooldir
)/sys-include
\" \
2021 -DTOOL_INCLUDE_DIR
=\"$(gcc_tooldir
)/include\" \
2022 -DLOCAL_INCLUDE_DIR
=\"$(includedir)\" \
2023 -DSTD_PROTO_DIR
=\"$(libsubdir
)\" \
2024 $(srcdir)/unprotoize.c
2026 # This info describes the target machine, so compile with GCC just built.
2027 SYSCALLS.c.X
: $(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
$(GCC_PASSES
) \
2029 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2030 cat
$(srcdir)/sys-types.h
$(srcdir)/sys-protos.h
> SYSCALLS.c
2031 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(INCLUDES
) \
2032 -aux-info
$@
-S
-o tmp-SYSCALLS.s SYSCALLS.c
2033 -rm -f SYSCALLS.c tmp-SYSCALLS.s
2036 test-protoize-simple
: .
/protoize .
/unprotoize
$(GCC_PASSES
)
2037 -rm -f tmp-proto.
[cso
]
2038 cp
$(srcdir)/protoize.c tmp-proto.c
2039 chmod u
+w tmp-proto.c
2040 .
/protoize
-N
-B .
/ -x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2041 $(CFLAGS) $(INCLUDES) \
2042 -DGCC_INCLUDE_DIR=0 \
2043 -DGPLUSPLUS_INCLUDE_DIR=0 \
2044 -DCROSS_INCLUDE_DIR=0 \
2045 -DTOOL_INCLUDE_DIR=0 \
2046 -DSTD_PROTO_DIR=0" tmp-proto.c
2047 @echo
'**********' Expect
400 lines of differences.
2048 -diff
$(srcdir)/protoize.c tmp-proto.c
> tmp-proto.diff
2049 -wc
-l tmp-proto.diff
2050 .
/unprotoize
-N
-x getopt.h
-c
"-B./ -Wall -Wwrite-strings \
2051 $(CFLAGS) $(INCLUDES) \
2052 -DGCC_INCLUDE_DIR=0 \
2053 -DGPLUSPLUS_INCLUDE_DIR=0 \
2054 -DCROSS_INCLUDE_DIR=0 \
2055 -DTOOL_INCLUDE_DIR=0 \
2056 -DSTD_PROTO_DIR=0" tmp-proto.c
2057 @echo Expect zero differences.
2058 diff
$(srcdir)/protoize.c tmp-proto.c | cat
2059 -rm -f tmp-proto.
[cs
] tmp-proto
$(objext
)
2061 gcov.o
: gcov.c gcov-io.h intl.h system.h
2063 # Only one of 'gcov' or 'gcov.exe' is actually built, depending
2064 # upon whether $(exeext) is empty or not.
2065 GCOV_OBJS
= gcov.o intl.o
2066 gcov
$(exeext
): $(GCOV_OBJS
) $(LIBDEPS
)
2067 $(CC
) $(ALL_CFLAGS
) $(LDFLAGS
) $(GCOV_OBJS
) $(LIBS
) -o
$@
2069 # Build the include directory. The stamp files are stmp-* rather than
2070 # s-* so that mostlyclean does not force the include directory to
2073 # Build the include directory including float.h (which no longer depends upon
2075 stmp-int-hdrs
: stmp-fixinc
$(USER_H
) xlimits.h
2076 # Copy in the headers provided with gcc.
2077 # The sed command gets just the last file name component;
2078 # this is necessary because VPATH could add a dirname.
2079 # Using basename would be simpler, but some systems don't have it.
2080 # The touch command is here to workaround an AIX/Linux NFS bug.
2081 for file in ..
$(USER_H
); do \
2082 if
[ X
$$file != X..
]; then \
2083 realfile
=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
2084 touch
include/$$realfile; \
2085 rm -f
include/$$realfile; \
2086 cp
$$file include; \
2087 chmod a
+r
include/$$realfile; \
2090 rm -f
include/limits.h
2091 cp xlimits.h
include/limits.h
2092 chmod a
+r
include/limits.h
2093 rm -f
include/float.h
2094 if
[ x
$(FLOAT_H
) != xMakefile.in
]; then \
2095 cp
$(srcdir)/config
/$(FLOAT_H
) include/float.h
&& \
2096 chmod a
+r
include/float.h
; \
2098 # Install the README
2099 rm -f
include/README
2100 cp
$(srcdir)/README-fixinc
include/README
2101 chmod a
+r
include/README
2104 # Now that float.h no longer depends upon enquire, this is actually a no-op.
2108 fixinc.sh
: $(srcdir)/fixinc
/mkfixinc.sh
2109 MAKE
="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc; pwd` ; \
2110 export MAKE
srcdir ; \
2111 cd .
/fixinc
; $(SHELL
) $${srcdir}/mkfixinc.sh
$(target
)
2113 ##stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
2116 ## if [ x$(FIXINCLUDES) != xMakefile.in ]; \
2118 ## for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
2119 ## if [ -d $$dir ]; \
2121 ## $(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
2124 ## if [ x$(INSTALL_ASSERT_H) != x ] ; \
2126 ## rm -f include/assert.h; \
2127 ## cp $(srcdir)/assert.h include/assert.h; \
2128 ## chmod a+r include/assert.h; \
2133 # Build fixed copies of system files.
2134 stmp-fixinc
: fixinc.sh gsyslimits.h
2135 rm -rf
include; mkdir
include
2136 TARGET_MACHINE
=$(target
); srcdir=`cd $(srcdir); pwd`; \
2137 INSTALL_ASSERT_H
=$(INSTALL_ASSERT_H
); \
2138 export TARGET_MACHINE
srcdir INSTALL_ASSERT_H
; \
2139 $(SHELL
) .
/fixinc.sh
`pwd`/include $(SYSTEM_HEADER_DIR
) $(OTHER_FIXINCLUDES_DIRS
)
2140 rm -f
include/syslimits.h
2141 if
[ -f
include/limits.h
]; then \
2142 mv
include/limits.h
include/syslimits.h
; \
2144 cp
$(srcdir)/gsyslimits.h
include/syslimits.h
; \
2146 chmod a
+r
include/syslimits.h
2147 # If $(SYSTEM_HEADER_DIR) is $(gcc_tooldir)/sys-include, and
2148 # that directory exists, then make sure that $(libsubdir) exists.
2149 # This is because cpp is compiled to find $(gcc_tooldir)/include via
2150 # $(libsubdir)/$(unlibsubdir), which will only work if $(libsubdir)
2152 if
[ "$(SYSTEM_HEADER_DIR)" = "$(gcc_tooldir)/sys-include" ] \
2153 && [ -d
$(gcc_tooldir
)/sys-include
]; then \
2154 if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; fi
; \
2155 if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; fi
; \
2156 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
) ; fi
; \
2157 if
[ -d
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ] ; then true
; else mkdir
$(libdir)/gcc-lib
/$(target_alias
)/$(version
) ; fi
; \
2162 # Files related to the fixproto script.
2164 deduced.h
: $(GCC_PASSES
) $(srcdir)/scan-types.sh stmp-int-hdrs
2165 if
[ -d
$(SYSTEM_HEADER_DIR
) ]; \
2167 CC
="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
2169 $(SHELL
) $(srcdir)/scan-types.sh
"$(srcdir)" >tmp-deduced.h
; \
2170 mv tmp-deduced.h deduced.h
; \
2175 GEN_PROTOS_OBJS
= gen-protos.o scan.o libcpp.a
2176 gen-protos
: $(GEN_PROTOS_OBJS
) $(HOST_LIBDEPS
)
2177 ${HOST_CC} $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o gen-protos \
2178 $(GEN_PROTOS_OBJS
) $(HOST_LIBS
)
2180 gen-protos.o
: gen-protos.c scan.h
$(build_xm_file
) system.h
2181 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/gen-protos.c
2183 scan.o
: scan.c scan.h
$(build_xm_file
) system.h
2184 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan.c
2186 xsys-protos.h
: $(GCC_PASSES
) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
2187 cat deduced.h
$(srcdir)/sys-protos.h
> tmp-fixtmp.c
2188 mv tmp-fixtmp.c fixtmp.c
2189 $(GCC_FOR_TARGET
) fixtmp.c
-w
-U__SIZE_TYPE__
-U__PTRDIFF_TYPE__
-U__WCHAR_TYPE__
-E \
2190 | sed
-e
's/ / /g' -e
's/ *(/ (/g' -e
's/ [ ]*/ /g' -e
's/( )/()/' \
2191 | .
/gen-protos
>xsys-protos.hT
2192 mv xsys-protos.hT xsys-protos.h
2195 fix-header
: fix-header.o scan-decls.o scan.o xsys-protos.h
$(HOST_LIBDEPS
) \
2197 $(HOST_CC
) $(HOST_CFLAGS
) $(HOST_LDFLAGS
) -o
$@ fix-header.o \
2198 scan-decls.o scan.o libcpp.a
$(HOST_LIBS
)
2200 fix-header.o
: fix-header.c
$(srcdir)/..
/include/obstack.h scan.h \
2201 xsys-protos.h
$(build_xm_file
) system.h cpplib.h cpphash.h
2202 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/fix-header.c
2204 scan-decls.o
: scan-decls.c scan.h cpplib.h
$(build_xm_file
) system.h
2205 $(HOST_CC
) -c
$(HOST_CFLAGS
) $(HOST_CPPFLAGS
) $(INCLUDES
) $(srcdir)/scan-decls.c
2207 # stmp-fixproto depends on this, not on fix-header directly.
2208 # The idea is to make sure fix-header gets built,
2209 # but not rerun fixproto after each stage
2210 # just because fix-header's mtime has changed.
2211 fixhdr.ready
: fix-header
2212 -if
[ -f fixhdr.ready
] ; then \
2215 touch fixhdr.ready
; \
2218 # stmp-headers is to make sure fixincludes has already finished.
2219 # The if statement is so that we don't run fixproto a second time
2220 # if it has already been run on the files in `include'.
2221 stmp-fixproto
: fixhdr.ready fixproto stmp-headers
2222 @echo
"Various warnings and error messages from fixproto are normal"
2223 -if
[ -d
include ] ; then true
; else mkdir
include; fi
2224 -if
[ -f
include/fixed
] ; then true
; \
2226 : This line works around a
'make' bug in BSDI
1.1.
; \
2227 FIXPROTO_DEFINES
="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES
; \
2228 if
[ -d
$(SYSTEM_HEADER_DIR
) ] ; then \
2229 $(SHELL
) ${srcdir}/fixproto
include include $(SYSTEM_HEADER_DIR
); \
2231 touch
include/fixed
; \
2235 # Remake the info files.
2238 info: cpp.
info gcc.
info lang.
info
2240 cpp.
info: $(srcdir)/cpp.texi
2241 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o
cpp.
info $(srcdir)/cpp.texi
2243 gcc.
info: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2244 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2245 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2246 $(MAKEINFO
) $(MAKEINFOFLAGS
) -I
$(srcdir) -o gcc.
info $(srcdir)/gcc.texi
2248 dvi: gcc.
dvi cpp.
dvi lang.
dvi
2250 # This works with GNU Make's default rule.
2251 gcc.
dvi: $(srcdir)/gcc.texi
$(srcdir)/extend.texi
$(srcdir)/install.texi \
2252 $(srcdir)/invoke.texi
$(srcdir)/md.texi
$(srcdir)/rtl.texi \
2253 $(srcdir)/tm.texi
$(srcdir)/gcov.texi
2254 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2256 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex gcc.texi
2258 cpp.
dvi: $(srcdir)/cpp.texi
2259 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2261 TEXINPUTS
=${texidir}:$(srcdir):$$TEXINPUTS tex cpp.texi
2264 INSTALL
: $(srcdir)/install1.texi
$(srcdir)/install.texi
2265 cd
$(srcdir); $(MAKEINFO
) -D INSTALLONLY \
2266 --no-split
-o INSTALL install1.texi
2268 # Deletion of files made during compilation.
2269 # There are four levels of this:
2270 # `mostlyclean', `clean', `distclean' and `maintainer-clean'.
2271 # `mostlyclean' is useful while working on a particular type of machine.
2272 # It deletes most, but not all, of the files made by compilation.
2273 # It does not delete libgcc.a or its parts, so it won't have to be recompiled.
2274 # `clean' deletes everything made by running `make all'.
2275 # `distclean' also deletes the files made by config.
2276 # `maintainer-clean' also deletes everything that could be regenerated
2277 # automatically, except for `configure'.
2278 # We remove as much from the language subdirectories as we can
2279 # (less duplicated code).
2282 mostlyclean: intl.
mostlyclean lang.
mostlyclean
2283 -rm -f
$(STAGESTUFF
)
2284 # Delete the temporary source copies for cross compilation.
2285 -rm -f
$(HOST_PREFIX_1
)rtl.c
$(HOST_PREFIX_1
)rtlanal.c
2286 -rm -f
$(HOST_PREFIX_1
)alloca.c
$(HOST_PREFIX_1
)malloc.c
2287 -rm -f
$(HOST_PREFIX_1
)obstack.c
2288 # Delete the temp files made in the course of building libgcc.a.
2289 -rm -f tmplibgcc
* tmpcopy xlimits.h libgcc1-test
2290 for name in
$(LIB1FUNCS
); do
rm -f
$${name}.c
; done
2291 # Delete other built files.
2292 -rm -f t-float.h-cross xsys-protos.hT fp-bit.c dp-bit.c
2293 # Delete the stamp and temporary files.
2294 -rm -f s-
* tmp-
* stamp-
* stmp-
*
2295 -rm -f
*/stamp-
* */tmp-
*
2296 # Delete debugging dump files.
2297 -rm -f
*.greg
*.lreg
*.combine
*.flow
*.cse
*.jump
*.rtl
*.tree
*.loop
2298 -rm -f
*.dbr
*.jump2
*.sched
*.cse2
*.sched2
*.stack
*.addressof
2299 -rm -f
*.regmove
*.mach
*.bp
*.gcse
*.flow2
2300 -rm -f
*/*.greg
*/*.lreg
*/*.combine
*/*.flow
*/*.cse
*/*.jump
*/*.rtl
2301 -rm -f
*/*.tree
*/*.loop
*/*.dbr
*/*.jump2
*/*.sched
*/*.cse2
2302 -rm -f
*/*.sched2
*/*.stack
*/*.regmove
*/*.gcse
*/*.flow2
2303 # Delete some files made during installation.
2304 -rm -f specs float.h-
* enquire SYSCALLS.c.X SYSCALLS.c
2305 -rm -f collect collect2 mips-tfile mips-tdump alloca.s
2306 # Delete files generated for fixproto
2307 -rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
2308 gen-protos fixproto.list fixtmp.
* fixhdr.ready
2309 # Delete unwanted output files from TeX.
2310 -rm -f
*.toc
*.log
*.vr
*.fn
*.cp
*.tp
*.ky
*.pg
2311 -rm -f
*/*.toc
*/*.log
*/*.vr
*/*.fn
*/*.cp
*/*.tp
*/*.ky
*/*.pg
2312 # Delete sorted indices we don't actually use.
2313 -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
2314 # Delete core dumps.
2318 # Delete all files made by compilation
2319 # that don't exist in the distribution.
2320 clean: mostlyclean intl.
clean lang.
clean
2321 # It may not be quite desirable to delete unprotoize.c here,
2322 # but the spec for `make clean' requires it.
2323 # Using unprotoize.c is not quite right in the first place,
2324 # but what better way is there?
2325 -rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
2329 -if
[ -f md.pre-cpp
]; then \
2332 # Delete the include directory.
2334 # Delete files used by the "multilib" facility (including libgcc subdirs).
2335 -rm -f multilib.h tmpmultilib
*
2336 -if
[ "x$(MULTILIB_DIRNAMES)" != x
] ; then \
2337 rm -rf
$(MULTILIB_DIRNAMES
); \
2338 else if
[ "x$(MULTILIB_OPTIONS)" != x
] ; then \
2339 rm -rf
`echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
2341 -rm -fr stage1 stage2 stage3 stage4
2343 # Delete all files that users would normally create
2344 # while building and installing GCC.
2345 INTL_DISTCLEAN
= intl.
distclean
2346 distclean: clean $(INTL_DISTCLEAN
) lang.
distclean
2347 -rm -f tm.h config.h auto-host.h auto-build.h tconfig.h hconfig.h
2349 -rm -f config.status config.run config.cache config.bak
2350 -rm -f Make-lang Make-hooks Make-host Make-target
2351 -rm -f Makefile specs.h options.h gencheck.h
*.oaux
2352 -rm -f gthr-default.h
2353 -rm -f
*/stage1
*/stage2
*/stage3
*/stage4
*/include
2354 -rm -f c-parse.output
2357 -rm -f site.exp site.bak testsuite
/site.exp testsuite
/site.bak
2358 -rm -f testsuite
/{gcc
,g
++}.
{log
,sum
}
2359 -rm -f intl
/libintl.h libintl.h
2361 # Delete anything likely to be found in the source directory
2362 # that shouldn't be in the distribution.
2363 extraclean
: distclean lang.extraclean
2364 -rm -rf
=* .
/"#"* *~
* config
/=* config
/"#"* config
/*~
*
2365 -rm -f patch
* *.orig
*.rej config
/patch
* config
/*.orig config
/*.rej
2366 -rm -f config
/*/=* config
/*/"#"* config
/*/*~
*
2367 -rm -f config
/*/*.orig config
/*/*.rej
2368 -rm -f
*.
dvi *.ps
*.oaux
*.d
*.
[zZ
] *.gz
2369 -rm -f
*.
tar *.xtar
*diff
*.diff.
* *.
tar.
* *.xtar.
* *diffs
2370 -rm -f
*lose config
/*lose config
/*/*lose
2371 -rm -f
*.s
*.s
[0-9] *.i config
/ChangeLog
2372 -rm -f y.tab.c
yacc.
*
2373 -rm -f
*/=* */"#"* */*~
*
2374 -rm -f
*/patch
* */*.orig
*/*.rej
2375 -rm -f
*/*.
dvi */*.oaux
*/*.d
*/*.
[zZ
] */*.gz
2376 -rm -f
*/*.
tar */*.xtar
*/*diff
*/*.diff.
* */*.
tar.
* */*.xtar.
* */*diffs
2377 -rm -f
*/*lose
*/*.s
*/*.s
[0-9] */*.i
2379 # Get rid of every file that's generated from some other file, except for `configure'.
2380 # Most of these files ARE PRESENT in the GCC distribution.
2381 # We define INTL_DISTCLEAN to be empty in the submake, so that
2382 # we don't descend into intl after its makefile has been removed.
2384 @echo
'This command is intended for maintainers to use; it'
2385 @echo
'deletes files that may need special tools to rebuild.'
2386 $(MAKE
) INTL_DISTCLEAN
= distclean \
2387 intl.maintainer-clean lang.maintainer-clean
2388 -rm -f c-parse.y c-gperf.h
2389 -rm -f c-parse.c c-parse.h c-parse.output
2390 -rm -f cexp.c cexp.output TAGS
2391 -rm -f
cpp.
info* cpp.??s
cpp.
*aux
2392 -rm -f gcc.
info* gcc.??s gcc.
*aux
2394 # Entry points `install' and `uninstall'.
2395 # Also use `install-collect2' to install collect2 when the config files don't.
2397 # The semicolon is to prevent the install.sh -> install default rule
2398 # from doing anything. Having it run true helps avoid problems and
2399 # noise from versions of make which don't like to have null commands.
2400 install: $(INSTALL_TARGET
) ; @true
2402 # Copy the compiler files into directories where they will be run.
2403 # Install the driver last so that the window when things are
2405 install-normal
: install-common
$(INSTALL_HEADERS
) $(INSTALL_LIBGCC
) \
2406 $(INSTALL_CPP
) install-man install-info intl.
install lang.install-normal \
2409 # Do nothing while making gcc with a cross-compiler. The person who
2410 # makes gcc for the target machine has to know how to put a complete
2411 # gcc together by hand.
2412 install-build
: force
2413 @echo You have to
install gcc on your target machine by hand.
2415 # Run this on the target machine
2416 # to finish installation of cross compiler.
2417 # This is not used anymore now that float.h does not depend on enquire.
2418 install-cross-rest
: install-float-h-cross
2420 # Handle cpp installation.
2422 -rm -f
$(bindir)/cpp
2423 $(INSTALL_PROGRAM
) -m
755 cpp.sh
$(bindir)/cpp
2424 if
[ x
$(cpp_install_dir
) != x
]; then \
2425 rm -f
$(prefix)/$(cpp_install_dir
)/cpp; \
2426 $(INSTALL_PROGRAM
) -m
755 cpp.sh
$(prefix)/$(cpp_install_dir
)/cpp; \
2430 -rm -f
$(bindir)/cpp
2431 -if
[ x
$(cpp_install_dir
) != x
]; then \
2432 rm -f
$(prefix)/$(cpp_install_dir
)/cpp; \
2435 # Install float.h for cross compiler.
2436 # Run this on the target machine!
2437 # This is not used anymore now that float.h does not depend on enquire.
2438 install-float-h-cross
: installdirs
2439 # if [ -f enquire ] ; then true; else false; fi
2440 # Note: don't use -. We should fail right away if enquire was not made.
2441 .
/enquire
-f
> $(tmpdir
)/float.h
2442 -rm -f
$(libsubdir
)/include/float.h
2443 $(INSTALL_DATA
) $(tmpdir
)/float.h
$(libsubdir
)/include/float.h
2444 -rm -f
$(tmpdir
)/float.h
2445 chmod a-x
$(libsubdir
)/include/float.h
2447 # Create the installation directories.
2449 -if
[ -d
$(prefix) ] ; then true
; else mkdir
$(prefix) ; chmod a
+rx
$(prefix) ; fi
2450 -if
[ -d
$(exec_prefix) ] ; then true
; else mkdir
$(exec_prefix) ; chmod a
+rx
$(exec_prefix) ; fi
2451 -if
[ -d
$(libdir) ] ; then true
; else mkdir
$(libdir) ; chmod a
+rx
$(libdir) ; fi
2452 -if
[ -d
$(libdir)/gcc-lib
] ; then true
; else mkdir
$(libdir)/gcc-lib
; chmod a
+rx
$(libdir)/gcc-lib
; fi
2453 # This dir isn't currently searched by cpp.
2454 # -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
2455 -fdir
= ; for
dir in
`echo $(libsubdir) | tr '/' ' '`; do \
2456 fdir
=$${fdir}/$${dir}; \
2457 if
[ -d
$${fdir} ] ; then true
; else mkdir
$${fdir}; chmod a
+rx
$${fdir}; fi
; \
2459 -if
[ -d
$(bindir) ] ; then true
; else mkdir
$(bindir) ; chmod a
+rx
$(bindir) ; fi
2460 -if
[ -d
$(includedir) ] ; then true
; else mkdir
$(includedir) ; chmod a
+rx
$(includedir) ; fi
2461 -if
[ -d
$(gcc_tooldir
) ] ; then true
; else mkdir
$(gcc_tooldir
) ; chmod a
+rx
$(gcc_tooldir
) ; fi
2462 -if
[ -d
$(assertdir
) ] ; then true
; else mkdir
$(assertdir
) ; chmod a
+rx
$(assertdir
) ; fi
2463 -if
[ -d
$(infodir) ] ; then true
; else mkdir
$(infodir) ; chmod a
+rx
$(infodir) ; fi
2464 # We don't use mkdir -p to create the parents of man1dir,
2465 # because some systems don't support it.
2466 # Instead, we use this technique to create the immediate parent of man1dir.
2467 -parent
=`echo $(man1dir)|sed -e 's@/[^/]*$$@@'`; \
2468 if
[ -d
$$parent ] ; then true
; else mkdir
$$parent ; chmod a
+rx
$$parent ; fi
2469 -if
[ -d
$(man1dir) ] ; then true
; else mkdir
$(man1dir) ; chmod a
+rx
$(man1dir) ; fi
2471 # Install the compiler executables built during cross compilation.
2472 install-common
: native
installdirs $(EXTRA_PARTS
) lang.install-common
2473 for file in
$(COMPILERS
); do \
2474 if
[ -f
$$file ] ; then \
2475 rm -f
$(libsubdir
)/$$file; \
2476 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2480 for file in
$(EXTRA_PASSES
) $(EXTRA_PROGRAMS
) $(USE_COLLECT2
) ..
; do \
2481 if
[ x
"$$file" != x..
]; then \
2482 rm -f
$(libsubdir
)/$$file; \
2483 $(INSTALL_PROGRAM
) $$file $(libsubdir
)/$$file; \
2486 for file in
$(EXTRA_PARTS
) ..
; do \
2487 if
[ x
"$$file" != x..
]; then \
2488 rm -f
$(libsubdir
)/$$file; \
2489 $(INSTALL_DATA
) $$file $(libsubdir
)/$$file; \
2490 chmod a-x
$(libsubdir
)/$$file; \
2493 # Don't mess with specs if it doesn't exist yet.
2494 -if
[ -f specs
] ; then \
2495 rm -f
$(libsubdir
)/specs
; \
2496 $(INSTALL_DATA
) specs
$(libsubdir
)/specs
; \
2497 chmod a-x
$(libsubdir
)/specs
; \
2499 # Install protoize if it was compiled.
2500 -if
[ -f protoize
$(exeext
) ]; \
2502 if
[ -f gcc-cross
$(exeext
) ] ; then \
2503 rm -f
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2504 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
); \
2505 rm -f
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2506 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
); \
2508 rm -f
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2509 $(INSTALL_PROGRAM
) protoize
$(exeext
) $(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
); \
2510 rm -f
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2511 $(INSTALL_PROGRAM
) unprotoize
$(exeext
) $(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
); \
2513 rm -f
$(libsubdir
)/SYSCALLS.c.X
; \
2514 $(INSTALL_DATA
) SYSCALLS.c.X
$(libsubdir
)/SYSCALLS.c.X
; \
2515 chmod a-x
$(libsubdir
)/SYSCALLS.c.X
; \
2517 -rm -f
$(libsubdir
)/cpp$(exeext
)
2518 $(INSTALL_PROGRAM
) cpp$(exeext
) $(libsubdir
)/cpp$(exeext
)
2519 # Install gcov if it was compiled.
2520 -if
[ -f gcov
$(exeext
) ]; \
2522 rm -f
$(bindir)/gcov
$(exeext
); \
2523 $(INSTALL_PROGRAM
) gcov
$(exeext
) $(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
); \
2526 # Install the driver program as $(target_alias)-gcc
2527 # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc.
2528 install-driver
: xgcc
$(exeext
)
2529 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2530 rm -f
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2531 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(bindir)/$(GCC_CROSS_NAME
)$(exeext
); \
2532 if
[ -d
$(gcc_tooldir
)/bin
/.
] ; then \
2533 rm -f
$(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2534 $(INSTALL_PROGRAM
) gcc-cross
$(exeext
) $(gcc_tooldir
)/bin
/gcc
$(exeext
); \
2537 rm -f
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2538 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
); \
2539 rm -f
$(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2540 $(LN
) $(bindir)/$(GCC_INSTALL_NAME
)$(exeext
) $(bindir)/$(target_alias
)-gcc-1
$(exeext
); \
2541 mv
$(bindir)/$(target_alias
)-gcc-1
$(exeext
) $(bindir)/$(target_alias
)-gcc
$(exeext
); \
2544 # Install the info files.
2545 # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir
2546 # to do the install.
2547 install-info
: doc
installdirs lang.install-info
2548 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2549 for f in
cpp.
info* gcc.
info*; do \
2550 $(INSTALL_DATA
) $$f $(infodir)/$$f; \
2552 -if
$(SHELL
) -c
'install-info --version' >/dev
/null
2>&1; then \
2553 if
[ -f
$(infodir)/dir ] ; then \
2554 for f in
cpp.
info gcc.
info; do \
2555 install-info
--dir-file
=$(infodir)/dir $(infodir)/$$f; \
2559 -chmod a-x
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2561 # Install the man pages.
2562 install-man
: installdirs $(srcdir)/gcc
.1 $(srcdir)/cccp
.1 lang.install-man
2563 -if
[ -f gcc-cross
$(exeext
) ] ; then \
2564 rm -f
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2565 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2566 chmod a-x
$(man1dir)/$(GCC_CROSS_NAME
)$(manext); \
2568 rm -f
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2569 $(INSTALL_DATA
) $(srcdir)/gcc
.1 $(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2570 chmod a-x
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext); \
2572 -rm -f
$(man1dir)/cccp
$(manext)
2573 -$(INSTALL_DATA
) $(srcdir)/cccp
.1 $(man1dir)/cccp
$(manext)
2574 -chmod a-x
$(man1dir)/cccp
$(manext)
2576 # Install the library.
2577 install-libgcc
: libgcc.a
installdirs
2578 -if
[ -f libgcc.a
] ; then \
2579 rm -f
$(libsubdir
)/libgcc.a
; \
2580 $(INSTALL_DATA
) libgcc.a
$(libsubdir
)/libgcc.a
; \
2581 if
$(RANLIB_TEST_FOR_TARGET
) ; then \
2582 (cd
$(libsubdir
); $(RANLIB_FOR_TARGET
) libgcc.a
); else true
; fi
; \
2583 chmod a-x
$(libsubdir
)/libgcc.a
; \
2586 # Install multiple versions of libgcc.a.
2587 install-multilib
: stmp-multilib
installdirs
2588 for i in
`$(GCC_FOR_TARGET) --print-multi-lib`; do \
2589 dir=`echo $$i | sed -e 's/;.*$$//'`; \
2590 if
[ -d
$(libsubdir
)/$${dir} ]; then true
; else mkdir
$(libsubdir
)/$${dir}; fi
; \
2591 for f in libgcc.a
$(EXTRA_MULTILIB_PARTS
); do \
2592 rm -f
$(libsubdir
)/$${dir}/$${f}; \
2593 $(INSTALL_DATA
) $${dir}/$${f} $(libsubdir
)/$${dir}/$${f}; \
2595 if
$(RANLIB_TEST_FOR_TARGET
); then \
2596 (cd
$(libsubdir
)/$${dir}; $(RANLIB_FOR_TARGET
) libgcc.a
); \
2598 chmod a-x
$(libsubdir
)/$${dir}/libgcc.a
; \
2601 # Install all the header files built in the include subdirectory.
2602 install-headers
: install-include-dir
$(INSTALL_HEADERS_DIR
) $(INSTALL_ASSERT_H
)
2603 # Fix symlinks to absolute paths in the installed include directory to
2604 # point to the installed directory, not the build directory.
2605 # Don't need to use LN_S here since we really do need ln -s and no substitutes.
2606 -files
=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
2607 if
[ $$?
-eq
0 ]; then \
2608 dir=`cd include; pwd`; \
2609 for i in
$$files; do \
2610 dest
=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
2611 if expr
"$$dest" : "$$dir.*" > /dev
/null
; then \
2612 rm -f
$(libsubdir
)/include/$$i; \
2613 ln
-s
`echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir
)/include/$$i; \
2618 # Create or recreate the gcc private include file directory.
2619 install-include-dir
: installdirs
2620 -rm -rf
$(libsubdir
)/include
2621 mkdir
$(libsubdir
)/include
2622 -chmod a
+rx
$(libsubdir
)/include
2624 # Install the include directory using tar.
2625 install-headers-tar
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2627 tar -cf
- .
; exit
0) |
(cd
$(libsubdir
)/include; tar $(TAROUTOPTS
) - )
2628 # /bin/sh on some systems returns the status of the first tar,
2629 # and that can lose with GNU tar which always writes a full block.
2630 # So use `exit 0' to ignore its exit status.
2632 # Install the include directory using cpio.
2633 install-headers-cpio
: stmp-headers
$(STMP_FIXPROTO
) install-include-dir
2634 (cd
include; find .
-print) |
(cd
include; cpio
-pdum
$(libsubdir
)/include)
2636 # Put assert.h where it won't override GNU libc's assert.h.
2637 # It goes in a dir that is searched after GNU libc's headers;
2638 # thus, the following conditionals are no longer needed.
2639 # But it's not worth deleting them now.
2640 ## Don't replace the assert.h already there if it is not from GCC.
2641 ## This code would be simpler if it tested for -f ... && ! grep ...
2642 ## but supposedly the ! operator is missing in sh on some systems.
2643 install-assert-h
: assert.h
installdirs
2644 if
[ -f
$(assertdir
)/assert.h
]; \
2646 if grep
"__eprintf" $(assertdir
)/assert.h
>/dev
/null
; \
2648 rm -f
$(assertdir
)/assert.h
; \
2649 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2650 chmod a-x
$(assertdir
)/assert.h
; \
2654 rm -f
$(assertdir
)/assert.h
; \
2655 $(INSTALL_DATA
) $(srcdir)/assert.h
$(assertdir
)/assert.h
; \
2656 chmod a-x
$(assertdir
)/assert.h
; \
2659 # Use this target to install the program `collect2' under the name `collect2'.
2660 install-collect2
: collect2
installdirs
2661 $(INSTALL_PROGRAM
) collect2
$(exeext
) $(libsubdir
)/collect2
$(exeext
)
2662 # Install the driver program as $(libsubdir)/gcc for collect2.
2663 $(INSTALL_PROGRAM
) xgcc
$(exeext
) $(libsubdir
)/gcc
$(exeext
)
2665 # Cancel installation by deleting the installed files.
2666 uninstall: intl.
uninstall lang.
uninstall $(UNINSTALL_CPP
)
2667 -rm -rf
$(libsubdir
)
2668 -rm -rf
$(bindir)/$(GCC_INSTALL_NAME
)$(exeext
)
2669 -rm -rf
$(bindir)/$(GCC_CROSS_NAME
)$(exeext
)
2670 -rm -rf
$(bindir)/$(PROTOIZE_INSTALL_NAME
)$(exeext
)
2671 -rm -rf
$(bindir)/$(PROTOIZE_CROSS_NAME
)$(exeext
)
2672 -rm -rf
$(bindir)/$(UNPROTOIZE_INSTALL_NAME
)$(exeext
)
2673 -rm -rf
$(bindir)/$(UNPROTOIZE_CROSS_NAME
)$(exeext
)
2674 -rm -rf
$(bindir)/$(GCOV_INSTALL_NAME
)$(exeext
)
2675 -rm -rf
$(man1dir)/$(GCC_INSTALL_NAME
)$(manext)
2676 -rm -rf
$(man1dir)/$(GCC_CROSS_NAME
)$(manext)
2677 -rm -rf
$(man1dir)/cccp
$(manext)
2678 -rm -rf
$(man1dir)/protoize
$(manext)
2679 -rm -rf
$(man1dir)/unprotoize
$(manext)
2680 -rm -f
$(infodir)/cpp.
info* $(infodir)/gcc.
info*
2682 # These targets are for the dejagnu testsuites. The file site.exp
2683 # contains global variables that all the testsuites will use.
2685 # Set to $(target_alias)/ for cross.
2686 target_subdir
= @target_subdir@
2688 site.exp
: .
/config.status Makefile
2689 @echo
"Making a new config file..."
2692 -@mv site.exp site.bak
2693 @echo
"## these variables are automatically generated by make ##" > .
/tmp0
2694 @echo
"# Do not edit here. If you wish to override these values" >> .
/tmp0
2695 @echo
"# add them to the last section" >> .
/tmp0
2696 @echo
"set rootme \"`pwd`\"" >> .
/tmp0
2697 @echo
"set srcdir \"`cd ${srcdir}; pwd`\"" >> .
/tmp0
2698 @echo
"set host_triplet $(host_canonical)" >> .
/tmp0
2699 @echo
"set build_triplet $(build_canonical)" >> .
/tmp0
2700 @echo
"set target_triplet $(target)" >> .
/tmp0
2701 @echo
"set target_alias $(target_alias)" >> .
/tmp0
2702 # CFLAGS is set even though it's empty to show we reserve the right to set it.
2703 @echo
"set CFLAGS \"\"" >> .
/tmp0
2704 @echo
"set CXXFLAGS \"-I$(objdir)/../$(target_subdir)libio -I\$$srcdir/../libg++/src -I\$$srcdir/../libio -I\$$srcdir/../libstdc++ -I\$$srcdir/../libstdc++/stl -L$(objdir)/../$(target_subdir)libg++ -L$(objdir)/../$(target_subdir)libstdc++\"" >> .
/tmp0
2705 # If newlib has been configured, we need to pass -B to gcc so it can find
2706 # newlib's crt0.o if it exists. This will cause a "path prefix not used"
2707 # message if it doesn't, but the testsuite is supposed to ignore the message -
2708 # it's too difficult to tell when to and when not to pass -B (not all targets
2709 # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that
2710 # seems like too selective a test.
2711 # ??? Another way to solve this might be to rely on linker scripts. Then
2712 # theoretically the -B won't be needed.
2713 # We also need to pass -L ../ld so that the linker can find ldscripts.
2714 @if
[ -d
$(objdir
)/..
/$(target_subdir
)newlib
] ; then \
2715 echo
"set newlib_cflags \"-I$(objdir)/../$(target_subdir)newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> .
/tmp0
; \
2716 echo
"set newlib_ldflags \"-B$(objdir)/../$(target_subdir)newlib/\"" >> .
/tmp0
; \
2717 echo
"append CFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2718 echo
"append CXXFLAGS \" \$$newlib_cflags\"" >> .
/tmp0
; \
2719 echo
"append LDFLAGS \" \$$newlib_ldflags\"" >> .
/tmp0
; \
2722 @if
[ -d
$(objdir
)/..
/ld ] ; then \
2723 echo
"append LDFLAGS \" -L$(objdir)/../ld\"" >> .
/tmp0
; \
2726 echo
"set tmpdir $(objdir)/testsuite" >> .
/tmp0
2727 @echo
"set srcdir \"\$${srcdir}/testsuite\"" >> .
/tmp0
2728 @echo
"## All variables above are generated by configure. Do Not Edit ##" >> .
/tmp0
2729 @cat .
/tmp0
> site.exp
2730 @cat site.bak | sed \
2731 -e
'1,/^## All variables above are.*##/ d' >> site.exp
2734 CHECK_TARGETS
= check-gcc check-g
++ check-g77 check-objc
2736 check: $(CHECK_TARGETS
)
2738 testsuite
/site.exp
: site.exp
2739 if
[ -d testsuite
]; then \
2744 rm -rf testsuite
/site.exp
2745 cp site.exp testsuite
/site.exp
2747 check-g
++: testsuite
/site.exp
2748 -rootme
=`pwd`; export rootme
; \
2749 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2751 EXPECT
=${EXPECT} ; export EXPECT
; \
2752 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2753 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2754 export TCL_LIBRARY
; fi
; \
2755 $(RUNTEST
) --tool g
++ $(RUNTESTFLAGS
)
2757 check-gcc
: testsuite
/site.exp
2758 -rootme
=`pwd`; export rootme
; \
2759 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2761 EXPECT
=${EXPECT} ; export EXPECT
; \
2762 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2763 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2764 export TCL_LIBRARY
; fi
; \
2765 $(RUNTEST
) --tool gcc
$(RUNTESTFLAGS
)
2767 check-g77
: testsuite
/site.exp
2768 -rootme
=`pwd`; export rootme
; \
2769 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2771 EXPECT
=${EXPECT} ; export EXPECT
; \
2772 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2773 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2774 export TCL_LIBRARY
; fi
; \
2775 $(RUNTEST
) --tool g77
$(RUNTESTFLAGS
)
2777 check-objc
: testsuite
/site.exp
2778 -rootme
=`pwd`; export rootme
; \
2779 srcdir=`cd ${srcdir}; pwd` ; export srcdir ; \
2781 EXPECT
=${EXPECT} ; export EXPECT
; \
2782 if
[ -f
$${rootme}/..
/expect
/expect
] ; then \
2783 TCL_LIBRARY
=`cd ${srcdir}/../tcl/library ; pwd` ; \
2784 export TCL_LIBRARY
; fi
; \
2785 $(RUNTEST
) --tool objc
$(RUNTESTFLAGS
)
2787 # These exist for maintenance purposes.
2789 # Update the tags table.
2793 mv
-f c-parse.
[ch
] cexp.c
=*.
[chy
] tmp-tags
; \
2794 etags
*.y
*.h
*.c
; \
2798 # Create the distribution tar.gz file.
2800 gzip
--best
< tmp-gcc.xtar
> tmp-gcc.xtar.gz
2801 mv tmp-gcc.xtar.gz gcc-
$(version
).
tar.gz
2803 tmp-gcc.xtar
: distdir
2804 # Make the distribution.
2805 tar -chf tmp-gcc.xtar gcc-
$(version
)
2808 if
[ -d
$(srcdir)/CVS
]; then cd
$(srcdir) && cvs
-r update
; fi
2810 # This target exists to do the initial work before the language specific
2812 distdir-start
: doc
$(srcdir)/INSTALL
$(srcdir)/c-parse.y
$(srcdir)/c-gperf.h \
2813 $(srcdir)/c-parse.c
$(srcdir)/cexp.c
$(srcdir)/config.in \
2814 $(srcdir)/version.c TAGS
2815 @case
'$(USE_NLS)' in \
2817 *) echo
"configure with --enable-nls before making a distribution"; \
2820 @if grep
-s
"for version ${mainversion}" gcc.texi
> /dev
/null
; \
2822 else echo
"You must update the version number in \`gcc.texi'"; sleep
10;\
2824 # Update the version number in README
2825 $(AWK
) '$$1 " " $$2 " " $$3 == "This directory contains" \
2826 { $$6 = version; print $$0 } \
2827 $$1 " " $$2 " " $$3 != "This directory contains"' \
2828 version
=$(version
) $(srcdir)/README
> tmp.README
2829 mv tmp.README README
2830 -rm -rf gcc-
$(version
) tmp
2831 # Put all the files in a temporary subdirectory
2832 # which has the name that we want to have in the tar file.
2839 for file in
`(cd $(srcdir) && echo *[0-9a-zA-Z+])`; do \
2840 test -f
$(srcdir)/$$file && $(LN_S
) $(srcdir)/$$file tmp
; \
2842 if
test "$(srcdir)" != "." ; then \
2843 for file in c-parse.c cexp.c
; do \
2844 test -f .
/$$file && $(LN_S
) ..
/$$file tmp
; \
2847 for file in
`(cd $(srcdir)/config && echo *[0-9a-zA-Z+])`; do \
2848 if
test -d
$(srcdir)/config
/$$file \
2849 && test "$$file" != RCS
&& test "$$file" != CVS
; then \
2850 mkdir tmp
/config
/$$file; \
2851 for subfile in
`(cd $(srcdir)/config/$$file && echo *[0-9a-zA-Z+])`; do \
2852 $(LN_S
) $(srcdir)/config
/$$file/$$subfile tmp
/config
/$$file; \
2855 $(LN_S
) $(srcdir)/config
/$$file tmp
/config
; \
2858 for file in
`(cd $(srcdir)/ginclude && echo *[0-9a-zA-Z+])`; do \
2859 $(LN_S
) $(srcdir)/ginclude
/$$file tmp
/ginclude
; \
2861 for file in
`(cd $(srcdir)/objc && echo *[0-9a-zA-Z+])`; do \
2862 $(LN_S
) $(srcdir)/objc
/$$file tmp
/objc
; \
2864 $(LN_S
) .gdbinit tmp
2866 # Finish making `distdir', after the languages have done their thing.
2868 mv tmp gcc-
$(version
)
2869 # Get rid of everything we don't want in the distribution. We'd want
2870 # this to use Makefile.in, but it doesn't have the `lang.foo' targets
2872 cd gcc-
$(version
); make extraclean distdir-check VERSION_DEP
=
2875 ($(AWK
) '/^[^#]/{print} /^#[A-Za-z]/{print substr($$1, 2)}' |
sort) \
2876 < po
/POTFILES.in
> tmp.POTFILES
2877 ls
[A-Za-z
]*.
[ch
] [a-z
]*/[A-Za-z
]*.
[ch
] \
2878 [a-z
]*/[a-z
]*/[A-Za-z
]*.
[ch
] |
sort > tmp.src
2879 diff tmp.POTFILES tmp.src ||
{ \
2880 echo
"po/POTFILES.in and sources do not match -- please fix"; \
2885 distdir
: distdir-cvs distdir-start intl.distdir intl.distdir-fixup \
2886 lang.distdir distdir-finish
2888 # make diff oldversion=M.N
2889 # creates a diff file between an older distribution and this one.
2890 # The -P option assumes this is GNU diff.
2892 diff
-rc2P
-x c-parse.y
-x c-parse.c
-x c-parse.h
-x c-gperf.h \
2893 -x cexp.c
-x
-x TAGS
-x INSTALL \
2894 -x configure
-x config.in \
2895 -x
"gcc.??" -x
"gcc.??s" -x gcc.aux
-x
"gcc.info*" \
2896 -x
"cpp.??" -x
"cpp.??s" -x
cpp.aux
-x
"cpp.info*" \
2897 $(LANG_DIFF_EXCLUDES
) \
2898 gcc-
$(oldversion
) gcc-
$(version
) > gcc-
$(oldversion
)-$(version
).diff
2900 bootstrap bootstrap-lean
: force
2901 # Only build the C compiler for stage1, because that is the only one that
2902 # we can guarantee will build with the native compiler, and also it is the
2903 # only thing useful for building stage2.
2904 $(MAKE
) CC
="$(CC)" libdir=$(libdir) LANGUAGES
="$(BOOT_LANGUAGES)"
2906 # This used to define ALLOCA as empty, but that would lead to bad results
2907 # for a subsequent `make install' since that would not have ALLOCA empty.
2908 # To prevent `make install' from compiling alloca.o and then relinking cc1
2909 # because alloca.o is newer, we permit these recursive makes to compile
2910 # alloca.o. Then cc1 is newer, so it won't have to be relinked.
2911 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2913 -if
test $@
= bootstrap-lean
; then
rm -rf stage1
; else true
; fi
2914 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2916 bootstrap2 bootstrap2-lean
: force
2917 $(MAKE
) CC
="stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage1
/ LANGUAGES
="$(LANGUAGES)"
2919 -if
test $@
= bootstrap2-lean
; then
rm -rf stage1
; else true
; fi
2920 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2922 bootstrap3 bootstrap3-lean
: force
2923 $(MAKE
) CC
="stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage2
/ LANGUAGES
="$(LANGUAGES)"
2925 bootstrap4 bootstrap4-lean
: force
2926 $(MAKE
) CC
="stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CFLAGS
="$(WARN_CFLAGS) $(BOOT_CFLAGS)" LDFLAGS
="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX
=stage3
/ LANGUAGES
="$(LANGUAGES)"
2928 # Compare the object files in the current directory with those in the
2931 # ./ avoids bug in some versions of tail.
2932 compare compare3 compare4 compare-lean compare3-lean compare4-lean
: force
2934 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2935 for file in
*$(objext
); do \
2936 tail
+16c .
/$$file > tmp-foo1
; \
2937 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2938 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2940 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2941 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2942 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2943 for file in
$$dir/*$(objext
); do \
2944 tail
+16c .
/$$file > tmp-foo1
; \
2945 tail
+16c stage
$$stage/$$file > tmp-foo2 \
2946 && (cmp tmp-foo1 tmp-foo2
> /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2951 case
"$@" in compare | compare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^compare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2952 if
[ -f .bad_compare
]; then \
2953 echo
"Bootstrap comparison failure!"; \
2958 *-lean
) rm -rf stage
$$stage ;; \
2963 # Compare the object files in the current directory with those in the
2964 # stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
2965 # running tail and the overhead of twice copying each object file.
2967 gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean
: force
2969 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2970 for file in
*$(objext
); do \
2971 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2973 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2974 for
dir in tmp-foo intl
$(SUBDIRS
); do \
2975 if
[ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
2976 for file in
$$dir/*$(objext
); do \
2977 (cmp
--ignore-initial
=16 $$file stage
$$stage/$$file > /dev
/null
2>&1 || echo
$$file differs
>> .bad_compare
) || true
; \
2981 case
"$@" in gnucompare | gnucompare-lean
) stage
=2 ;; * ) stage
=`echo $@ | sed -e 's,^gnucompare\([0-9][0-9]*\).*,\1,'` ;; esac
; \
2982 if
[ -f .bad_compare
]; then \
2983 echo
"Bootstrap comparison failure!"; \
2988 *-lean
) rm -rf stage
$$stage ;; \
2992 # Copy the object files from a particular stage into a subdirectory.
2994 -if
[ -d stage1
] ; then true
; else mkdir stage1
; fi
2995 -for
dir in intl
$(SUBDIRS
) ; \
2997 if
[ -d stage1
/$$dir ] ; then true
; else mkdir stage1
/$$dir ; fi
; \
2999 -mv
$(STAGESTUFF
) stage1
3000 -mv intl
/*$(objext
) stage1
/intl
3001 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3002 # dir will work properly.
3003 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage1
; else true
; fi
3004 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage1
; else true
; fi
3005 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage1
; else true
; fi
3006 -rm -f stage1
/libgcc.a
3008 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3009 $(RANLIB_FOR_TARGET
) stage1
/libgcc.a
; \
3011 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3012 cp stage1
/$${f} .
; \
3015 stage1
: force stage1-start lang.stage1
3018 -if
[ -d stage2
] ; then true
; else mkdir stage2
; fi
3019 -for
dir in intl
$(SUBDIRS
) ; \
3021 if
[ -d stage2
/$$dir ] ; then true
; else mkdir stage2
/$$dir ; fi
; \
3023 -mv
$(STAGESTUFF
) stage2
3024 -mv intl
/*$(objext
) stage2
/intl
3025 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3026 # dir will work properly.
3027 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage2
; else true
; fi
3028 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage2
; else true
; fi
3029 -if
[ -f collect-ld
] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage2
; else true
; fi
3030 -rm -f stage2
/libgcc.a
3032 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3033 $(RANLIB_FOR_TARGET
) stage2
/libgcc.a
; \
3035 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3036 cp stage2
/$${f} .
; \
3039 stage2
: force stage2-start lang.stage2
3042 -if
[ -d stage3
] ; then true
; else mkdir stage3
; fi
3043 -for
dir in intl
$(SUBDIRS
) ; \
3045 if
[ -d stage3
/$$dir ] ; then true
; else mkdir stage3
/$$dir ; fi
; \
3047 -mv
$(STAGESTUFF
) stage3
3048 -mv intl
/*$(objext
) stage3
/intl
3049 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3050 # dir will work properly.
3051 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage3
; else true
; fi
3052 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage3
; else true
; fi
3053 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage3
; else true
; fi
3054 -rm -f stage3
/libgcc.a
3056 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3057 $(RANLIB_FOR_TARGET
) stage3
/libgcc.a
; \
3059 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3060 cp stage3
/$${f} .
; \
3063 stage3
: force stage3-start lang.stage3
3066 -if
[ -d stage4
] ; then true
; else mkdir stage4
; fi
3067 -for
dir in intl
$(SUBDIRS
) ; \
3069 if
[ -d stage4
/$$dir ] ; then true
; else mkdir stage4
/$$dir ; fi
; \
3071 -mv
$(STAGESTUFF
) stage4
3072 -mv intl
/*$(objext
) stage4
/intl
3073 # Copy as/ld if they exist to stage dir, so that running xgcc from the stage
3074 # dir will work properly.
3075 -if
[ -f
as$(exeext
) ] ; then
$(LN_S
) ..
/as$(exeext
) stage4
; else true
; fi
3076 -if
[ -f
ld$(exeext
) ] ; then
$(LN_S
) ..
/ld$(exeext
) stage4
; else true
; fi
3077 -if
[ -f collect-ld
$(exeext
) ] ; then
$(LN_S
) ..
/collect-ld
$(exeext
) stage4
; else true
; fi
3078 -rm -f stage4
/libgcc.a
3080 -if
$(RANLIB_TEST_FOR_TARGET
) ; then \
3081 $(RANLIB_FOR_TARGET
) stage4
/libgcc.a
; \
3083 -for f in ..
$(EXTRA_MULTILIB_PARTS
); do if
[ x
$${f} != x..
]; then \
3084 cp stage4
/$${f} .
; \
3087 stage4
: force stage4-start lang.stage4
3089 # Copy just the executable files from a particular stage into a subdirectory,
3090 # and delete the object files. Use this if you're just verifying a version
3091 # that is pretty sure to work, and you are short of disk space.
3092 risky-stage1
: stage1
3095 risky-stage2
: stage2
3098 risky-stage3
: stage3
3101 risky-stage4
: stage4
3104 #In GNU Make, ignore whether `stage*' exists.
3105 .PHONY
: stage1 stage2 stage3 stage4
clean maintainer-clean TAGS bootstrap
3106 .PHONY
: risky-stage1 risky-stage2 risky-stage3 risky-stage4
3111 # The enquire rules are still useful for building new float-anything.h.
3112 # Special flags for compiling enquire.
3113 # We disable optimization to make floating point more reliable.
3114 ENQUIRE_CFLAGS
= -DNO_MEM
-DNO_LONG_DOUBLE_IO
-O0
3115 ENQUIRE_LDFLAGS
= $(LDFLAGS
)
3117 # Enquire target (This is a variable so that a target can choose not to
3121 # Test to see whether <float.h> exists in the system header files,
3122 # and is not derived from GCC.
3124 [ -f
$(SYSTEM_HEADER_DIR
)/float.h
] && \
3125 if grep
'ifndef _FLOAT_H___' $(SYSTEM_HEADER_DIR
)/float.h
>/dev
/null
; \
3128 # We pretend to not having a usable <float.h>, hence disable the FLOAT_H_TEST
3129 # to ensure, we're emitting a full blown <float.h> ourselves.
3130 FLOAT_H_TEST
= false
3132 # Used to compile enquire with standard cc, but have forgotten why.
3133 # Let's try with GCC.
3134 enquire
: enquire.o
$(GCC_PARTS
)
3135 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ENQUIRE_LDFLAGS
) enquire.o
-o
$@
3136 enquire.o
: $(srcdir)/enquire.c
$(GCC_PASSES
) stmp-int-hdrs
3137 if
$(FLOAT_H_TEST
); then \
3138 rm -f
include/float.h
; \
3139 SYS_FLOAT_H_WRAP
=1; \
3141 SYS_FLOAT_H_WRAP
=0; \
3143 $(GCC_FOR_TARGET
) $(GCC_CFLAGS
) $(ALL_CPPFLAGS
) $(ENQUIRE_CFLAGS
) \
3144 -DSYS_FLOAT_H_WRAP
=$$SYS_FLOAT_H_WRAP \
3145 -I.
-c
$(srcdir)/enquire.c
3147 # Create float.h source for the native machine.
3148 # Make it empty if we can use the system float.h without changes.
3149 float.h-nat
: enquire
3150 -.
/enquire
-f
> tmp-float.h
3151 grep
'#define [^_]' tmp-float.h
>/dev
/null || true
> tmp-float.h
3152 mv tmp-float.h float.h-nat
3154 # Create a dummy float.h source for a cross-compiler.
3155 # ??? This isn't used anymore. Should we create config/float-unkn.h
3156 # and make that the default float_format in configure?
3158 echo
"#ifndef __GCC_FLOAT_NOT_NEEDED" > t-float.h-cross
3159 echo
"#error float.h values not known for cross-compiler" >> t-float.h-cross
3160 echo
"#endif" >> t-float.h-cross
3161 mv t-float.h-cross float.h-cross