1 /* RTL-based forward propagation pass for GNU compiler.
2 Copyright (C) 2005-2022 Free Software Foundation, Inc.
3 Contributed by Paolo Bonzini and Steven Bosscher.
5 This file is part of GCC.
7 GCC is free software; you can redistribute it and/or modify it under
8 the terms of the GNU General Public License as published by the Free
9 Software Foundation; either version 3, or (at your option) any later
12 GCC is distributed in the hope that it will be useful, but WITHOUT ANY
13 WARRANTY; without even the implied warranty of MERCHANTABILITY or
14 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
17 You should have received a copy of the GNU General Public License
18 along with GCC; see the file COPYING3. If not see
19 <http://www.gnu.org/licenses/>. */
21 #define INCLUDE_ALGORITHM
22 #define INCLUDE_FUNCTIONAL
25 #include "coretypes.h"
33 #include "cfgcleanup.h"
35 #include "tree-pass.h"
39 /* This pass does simple forward propagation and simplification when an
40 operand of an insn can only come from a single def. This pass uses
41 RTL SSA, so it is global. However, we only do limited analysis of
42 available expressions.
44 1) The pass tries to propagate the source of the def into the use,
45 and checks if the result is independent of the substituted value.
46 For example, the high word of a (zero_extend:DI (reg:SI M)) is always
47 zero, independent of the source register.
49 In particular, we propagate constants into the use site. Sometimes
50 RTL expansion did not put the constant in the same insn on purpose,
51 to satisfy a predicate, and the result will fail to be recognized;
52 but this happens rarely and in this case we can still create a
53 REG_EQUAL note. For multi-word operations, this
55 (set (subreg:SI (reg:DI 120) 0) (const_int 0))
56 (set (subreg:SI (reg:DI 120) 4) (const_int -1))
57 (set (subreg:SI (reg:DI 122) 0)
58 (ior:SI (subreg:SI (reg:DI 119) 0) (subreg:SI (reg:DI 120) 0)))
59 (set (subreg:SI (reg:DI 122) 4)
60 (ior:SI (subreg:SI (reg:DI 119) 4) (subreg:SI (reg:DI 120) 4)))
62 can be simplified to the much simpler
64 (set (subreg:SI (reg:DI 122) 0) (subreg:SI (reg:DI 119)))
65 (set (subreg:SI (reg:DI 122) 4) (const_int -1))
67 This particular propagation is also effective at putting together
68 complex addressing modes. We are more aggressive inside MEMs, in
69 that all definitions are propagated if the use is in a MEM; if the
70 result is a valid memory address we check address_cost to decide
71 whether the substitution is worthwhile.
73 2) The pass propagates register copies. This is not as effective as
74 the copy propagation done by CSE's canon_reg, which works by walking
75 the instruction chain, it can help the other transformations.
77 We should consider removing this optimization, and instead reorder the
78 RTL passes, because GCSE does this transformation too. With some luck,
79 the CSE pass at the end of rest_of_handle_gcse could also go away.
81 3) The pass looks for paradoxical subregs that are actually unnecessary.
84 (set (reg:QI 120) (subreg:QI (reg:SI 118) 0))
85 (set (reg:QI 121) (subreg:QI (reg:SI 119) 0))
86 (set (reg:SI 122) (plus:SI (subreg:SI (reg:QI 120) 0)
87 (subreg:SI (reg:QI 121) 0)))
89 are very common on machines that can only do word-sized operations.
90 For each use of a paradoxical subreg (subreg:WIDER (reg:NARROW N) 0),
91 if it has a single def and it is (subreg:NARROW (reg:WIDE M) 0),
92 we can replace the paradoxical subreg with simply (reg:WIDE M). The
93 above will simplify this to
95 (set (reg:QI 120) (subreg:QI (reg:SI 118) 0))
96 (set (reg:QI 121) (subreg:QI (reg:SI 119) 0))
97 (set (reg:SI 122) (plus:SI (reg:SI 118) (reg:SI 119)))
99 where the first two insns are now dead. */
101 using namespace rtl_ssa
;
103 static int num_changes
;
105 /* Do not try to replace constant addresses or addresses of local and
106 argument slots. These MEM expressions are made only once and inserted
107 in many instructions, as well as being used to control symbol table
108 output. It is not safe to clobber them.
110 There are some uncommon cases where the address is already in a register
111 for some reason, but we cannot take advantage of that because we have
112 no easy way to unshare the MEM. In addition, looking up all stack
113 addresses is costly. */
116 can_simplify_addr (rtx addr
)
120 if (CONSTANT_ADDRESS_P (addr
))
123 if (GET_CODE (addr
) == PLUS
)
124 reg
= XEXP (addr
, 0);
129 || (REGNO (reg
) != FRAME_POINTER_REGNUM
130 && REGNO (reg
) != HARD_FRAME_POINTER_REGNUM
131 && REGNO (reg
) != ARG_POINTER_REGNUM
));
134 /* MEM is the result of an address simplification, and temporarily
135 undoing changes OLD_NUM_CHANGES onwards restores the original address.
136 Return whether it is good to use the new address instead of the
137 old one. INSN is the containing instruction. */
140 should_replace_address (int old_num_changes
, rtx mem
, rtx_insn
*insn
)
144 /* Prefer the new address if it is less expensive. */
145 bool speed
= optimize_bb_for_speed_p (BLOCK_FOR_INSN (insn
));
146 temporarily_undo_changes (old_num_changes
);
147 gain
= address_cost (XEXP (mem
, 0), GET_MODE (mem
),
148 MEM_ADDR_SPACE (mem
), speed
);
149 redo_changes (old_num_changes
);
150 gain
-= address_cost (XEXP (mem
, 0), GET_MODE (mem
),
151 MEM_ADDR_SPACE (mem
), speed
);
153 /* If the addresses have equivalent cost, prefer the new address
154 if it has the highest `set_src_cost'. That has the potential of
155 eliminating the most insns without additional costs, and it
156 is the same that cse.cc used to do. */
159 gain
= set_src_cost (XEXP (mem
, 0), VOIDmode
, speed
);
160 temporarily_undo_changes (old_num_changes
);
161 gain
-= set_src_cost (XEXP (mem
, 0), VOIDmode
, speed
);
162 redo_changes (old_num_changes
);
171 class fwprop_propagation
: public insn_propagation
174 static const uint16_t CHANGED_MEM
= FIRST_SPARE_RESULT
;
175 static const uint16_t CONSTANT
= FIRST_SPARE_RESULT
<< 1;
176 static const uint16_t PROFITABLE
= FIRST_SPARE_RESULT
<< 2;
178 fwprop_propagation (insn_info
*, set_info
*, rtx
, rtx
);
180 bool changed_mem_p () const { return result_flags
& CHANGED_MEM
; }
181 bool folded_to_constants_p () const;
182 bool profitable_p () const;
184 bool check_mem (int, rtx
) final override
;
185 void note_simplification (int, uint16_t, rtx
, rtx
) final override
;
186 uint16_t classify_result (rtx
, rtx
);
189 const bool single_use_p
;
190 const bool single_ebb_p
;
194 /* Prepare to replace FROM with TO in USE_INSN. */
196 fwprop_propagation::fwprop_propagation (insn_info
*use_insn
,
197 set_info
*def
, rtx from
, rtx to
)
198 : insn_propagation (use_insn
->rtl (), from
, to
),
199 single_use_p (def
->single_nondebug_use ()),
200 single_ebb_p (use_insn
->ebb () == def
->ebb ())
202 should_check_mems
= true;
203 should_note_simplifications
= true;
206 /* MEM is the result of an address simplification, and temporarily
207 undoing changes OLD_NUM_CHANGES onwards restores the original address.
208 Return true if the propagation should continue, false if it has failed. */
211 fwprop_propagation::check_mem (int old_num_changes
, rtx mem
)
213 if (!memory_address_addr_space_p (GET_MODE (mem
), XEXP (mem
, 0),
214 MEM_ADDR_SPACE (mem
)))
216 failure_reason
= "would create an invalid MEM";
220 temporarily_undo_changes (old_num_changes
);
221 bool can_simplify
= can_simplify_addr (XEXP (mem
, 0));
222 redo_changes (old_num_changes
);
225 failure_reason
= "would replace a frame address";
229 /* Copy propagations are always ok. Otherwise check the costs. */
230 if (!(REG_P (from
) && REG_P (to
))
231 && !should_replace_address (old_num_changes
, mem
, insn
))
233 failure_reason
= "would increase the cost of a MEM";
237 result_flags
|= CHANGED_MEM
;
241 /* OLDX has been simplified to NEWX. Describe the change in terms of
245 fwprop_propagation::classify_result (rtx old_rtx
, rtx new_rtx
)
247 if (CONSTANT_P (new_rtx
))
249 /* If OLD_RTX is a LO_SUM, then it presumably exists for a reason,
250 and NEW_RTX is likely not a legitimate address. We want it to
251 disappear if it is invalid.
253 ??? Using the mode of the LO_SUM as the mode of the address
254 seems odd, but it was what the pre-SSA code did. */
255 if (GET_CODE (old_rtx
) == LO_SUM
256 && !memory_address_p (GET_MODE (old_rtx
), new_rtx
))
258 return CONSTANT
| PROFITABLE
;
261 /* Allow replacements that simplify operations on a vector or complex
262 value to a component. The most prominent case is
263 (subreg ([vec_]concat ...)). */
265 && !HARD_REGISTER_P (new_rtx
)
266 && (VECTOR_MODE_P (GET_MODE (from
))
267 || COMPLEX_MODE_P (GET_MODE (from
)))
268 && GET_MODE (new_rtx
) == GET_MODE_INNER (GET_MODE (from
)))
271 /* Allow (subreg (mem)) -> (mem) simplifications with the following
273 1) Propagating (mem)s into multiple uses is not profitable.
274 2) Propagating (mem)s across EBBs may not be profitable if the source EBB
275 runs less frequently.
276 3) Propagating (mem)s into paradoxical (subreg)s is not profitable.
277 4) Creating new (mem/v)s is not correct, since DCE will not remove the old
281 && SUBREG_P (old_rtx
)
282 && !paradoxical_subreg_p (old_rtx
)
284 && !MEM_VOLATILE_P (new_rtx
))
290 /* Record that OLD_RTX has been simplified to NEW_RTX. OLD_NUM_CHANGES
291 is the number of unrelated changes that had been made before processing
292 OLD_RTX and its subrtxes. OLD_RESULT_FLAGS is the value that result_flags
293 had at that point. */
296 fwprop_propagation::note_simplification (int old_num_changes
,
297 uint16_t old_result_flags
,
298 rtx old_rtx
, rtx new_rtx
)
300 result_flags
&= ~(CONSTANT
| PROFITABLE
);
301 uint16_t new_flags
= classify_result (old_rtx
, new_rtx
);
303 new_flags
&= old_result_flags
;
304 result_flags
|= new_flags
;
307 /* Return true if all substitutions eventually folded to constants. */
310 fwprop_propagation::folded_to_constants_p () const
312 /* If we're propagating a HIGH, require it to be folded with a
313 partnering LO_SUM. For example, a REG_EQUAL note with a register
314 replaced by an unfolded HIGH is not useful. */
315 if (CONSTANT_P (to
) && GET_CODE (to
) != HIGH
)
317 return !(result_flags
& UNSIMPLIFIED
) && (result_flags
& CONSTANT
);
321 /* Return true if it is worth keeping the result of the propagation,
322 false if it would increase the complexity of the pattern too much. */
325 fwprop_propagation::profitable_p () const
327 if (changed_mem_p ())
330 if (!(result_flags
& UNSIMPLIFIED
)
331 && (result_flags
& PROFITABLE
))
337 if (GET_CODE (to
) == SUBREG
338 && REG_P (SUBREG_REG (to
))
339 && !paradoxical_subreg_p (to
))
348 /* Check that X has a single def. */
351 reg_single_def_p (rtx x
)
353 return REG_P (x
) && crtl
->ssa
->single_dominating_def (REGNO (x
));
356 /* Return true if X contains a paradoxical subreg. */
359 contains_paradoxical_subreg_p (rtx x
)
361 subrtx_var_iterator::array_type array
;
362 FOR_EACH_SUBRTX_VAR (iter
, array
, x
, NONCONST
)
365 if (SUBREG_P (x
) && paradoxical_subreg_p (x
))
371 /* Try to substitute (set DEST SRC), which defines DEF, into note NOTE of
372 USE_INSN. Return the number of substitutions on success, otherwise return
373 -1 and leave USE_INSN unchanged.
375 If REQUIRE_CONSTANT is true, require all substituted occurrences of SRC
376 to fold to a constant, so that the note does not use any more registers
377 than it did previously. If REQUIRE_CONSTANT is false, also allow the
378 substitution if it's something we'd normally allow for the main
379 instruction pattern. */
382 try_fwprop_subst_note (insn_info
*use_insn
, set_info
*def
,
383 rtx note
, rtx dest
, rtx src
, bool require_constant
)
385 rtx_insn
*use_rtl
= use_insn
->rtl ();
386 insn_info
*def_insn
= def
->insn ();
388 insn_change_watermark watermark
;
389 fwprop_propagation
prop (use_insn
, def
, dest
, src
);
390 if (!prop
.apply_to_rvalue (&XEXP (note
, 0)))
392 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
393 fprintf (dump_file
, "cannot propagate from insn %d into"
394 " notes of insn %d: %s\n", def_insn
->uid (),
395 use_insn
->uid (), prop
.failure_reason
);
399 if (prop
.num_replacements
== 0)
402 if (require_constant
)
404 if (!prop
.folded_to_constants_p ())
406 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
407 fprintf (dump_file
, "cannot propagate from insn %d into"
408 " notes of insn %d: %s\n", def_insn
->uid (),
409 use_insn
->uid (), "wouldn't fold to constants");
415 if (!prop
.folded_to_constants_p () && !prop
.profitable_p ())
417 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
418 fprintf (dump_file
, "cannot propagate from insn %d into"
419 " notes of insn %d: %s\n", def_insn
->uid (),
420 use_insn
->uid (), "would increase complexity of node");
425 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
427 fprintf (dump_file
, "\nin notes of insn %d, replacing:\n ",
429 temporarily_undo_changes (0);
430 print_inline_rtx (dump_file
, note
, 2);
432 fprintf (dump_file
, "\n with:\n ");
433 print_inline_rtx (dump_file
, note
, 2);
434 fprintf (dump_file
, "\n");
437 return prop
.num_replacements
;
440 /* Try to substitute (set DEST SRC), which defines DEF, into location LOC of
441 USE_INSN's pattern. Return true on success, otherwise leave USE_INSN
445 try_fwprop_subst_pattern (obstack_watermark
&attempt
, insn_change
&use_change
,
446 set_info
*def
, rtx
*loc
, rtx dest
, rtx src
)
448 insn_info
*use_insn
= use_change
.insn ();
449 rtx_insn
*use_rtl
= use_insn
->rtl ();
450 insn_info
*def_insn
= def
->insn ();
452 insn_change_watermark watermark
;
453 fwprop_propagation
prop (use_insn
, def
, dest
, src
);
454 if (!prop
.apply_to_pattern (loc
))
456 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
457 fprintf (dump_file
, "cannot propagate from insn %d into"
458 " insn %d: %s\n", def_insn
->uid (), use_insn
->uid (),
459 prop
.failure_reason
);
463 if (prop
.num_replacements
== 0)
466 if (!prop
.profitable_p ())
468 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
469 fprintf (dump_file
, "cannot propagate from insn %d into"
470 " insn %d: %s\n", def_insn
->uid (), use_insn
->uid (),
471 "would increase complexity of pattern");
475 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
477 fprintf (dump_file
, "\npropagating insn %d into insn %d, replacing:\n",
478 def_insn
->uid (), use_insn
->uid ());
479 temporarily_undo_changes (0);
480 print_rtl_single (dump_file
, PATTERN (use_rtl
));
484 /* ??? In theory, it should be better to use insn costs rather than
485 set_src_costs here. That would involve replacing this code with
486 change_is_worthwhile. */
487 bool ok
= recog (attempt
, use_change
);
488 if (ok
&& !prop
.changed_mem_p () && !use_insn
->is_asm ())
489 if (rtx use_set
= single_set (use_rtl
))
491 bool speed
= optimize_bb_for_speed_p (BLOCK_FOR_INSN (use_rtl
));
492 temporarily_undo_changes (0);
493 auto old_cost
= set_src_cost (SET_SRC (use_set
),
494 GET_MODE (SET_DEST (use_set
)), speed
);
496 auto new_cost
= set_src_cost (SET_SRC (use_set
),
497 GET_MODE (SET_DEST (use_set
)), speed
);
498 if (new_cost
> old_cost
)
501 fprintf (dump_file
, "change not profitable"
502 " (cost %d -> cost %d)\n", old_cost
, new_cost
);
509 /* The pattern didn't match, but if all uses of SRC folded to
510 constants, we can add a REG_EQUAL note for the result, if there
511 isn't one already. */
512 if (!prop
.folded_to_constants_p ())
515 /* Test this first to avoid creating an unnecessary copy of SRC. */
516 if (find_reg_note (use_rtl
, REG_EQUAL
, NULL_RTX
))
519 rtx set
= set_for_reg_notes (use_rtl
);
520 if (!set
|| !REG_P (SET_DEST (set
)))
523 rtx value
= copy_rtx (SET_SRC (set
));
526 /* If there are any paradoxical SUBREGs, drop the REG_EQUAL note,
527 because the bits in there can be anything and so might not
528 match the REG_EQUAL note content. See PR70574. */
529 if (contains_paradoxical_subreg_p (SET_SRC (set
)))
532 if (dump_file
&& (dump_flags
& TDF_DETAILS
))
533 fprintf (dump_file
, " Setting REG_EQUAL note\n");
535 return set_unique_reg_note (use_rtl
, REG_EQUAL
, value
);
538 rtx
*note_ptr
= ®_NOTES (use_rtl
);
539 while (rtx note
= *note_ptr
)
541 if ((REG_NOTE_KIND (note
) == REG_EQUAL
542 || REG_NOTE_KIND (note
) == REG_EQUIV
)
543 && try_fwprop_subst_note (use_insn
, def
, note
, dest
, src
, false) < 0)
545 *note_ptr
= XEXP (note
, 1);
546 free_EXPR_LIST_node (note
);
549 note_ptr
= &XEXP (note
, 1);
552 confirm_change_group ();
553 crtl
->ssa
->change_insn (use_change
);
558 /* Try to substitute (set DEST SRC), which defines DEF, into USE_INSN's notes,
559 given that it was not possible to do this for USE_INSN's main pattern.
560 Return true on success, otherwise leave USE_INSN unchanged. */
563 try_fwprop_subst_notes (insn_info
*use_insn
, set_info
*def
,
566 rtx_insn
*use_rtl
= use_insn
->rtl ();
567 for (rtx note
= REG_NOTES (use_rtl
); note
; note
= XEXP (note
, 1))
568 if ((REG_NOTE_KIND (note
) == REG_EQUAL
569 || REG_NOTE_KIND (note
) == REG_EQUIV
)
570 && try_fwprop_subst_note (use_insn
, def
, note
, dest
, src
, true) > 0)
572 confirm_change_group ();
579 /* Check whether we could validly substitute (set DEST SRC), which defines DEF,
580 into USE. If so, first try performing the substitution in location LOC
581 of USE->insn ()'s pattern. If that fails, try instead to substitute
584 Return true on success, otherwise leave USE_INSN unchanged. */
587 try_fwprop_subst (use_info
*use
, set_info
*def
,
588 rtx
*loc
, rtx dest
, rtx src
)
590 insn_info
*use_insn
= use
->insn ();
591 insn_info
*def_insn
= def
->insn ();
593 auto attempt
= crtl
->ssa
->new_change_attempt ();
594 use_array src_uses
= remove_note_accesses (attempt
, def_insn
->uses ());
596 /* ??? Not really a meaningful test: it means we can propagate arithmetic
597 involving hard registers but not bare references to them. A better
598 test would be to iterate over src_uses looking for hard registers
599 that are not fixed. */
600 if (REG_P (src
) && HARD_REGISTER_P (src
))
603 /* ??? It would be better to make this EBB-based instead. That would
604 involve checking for equal EBBs rather than equal BBs and trying
605 to make the uses available at use_insn->ebb ()->first_bb (). */
606 if (def_insn
->bb () != use_insn
->bb ())
608 src_uses
= crtl
->ssa
->make_uses_available (attempt
, src_uses
,
610 use_insn
->is_debug_insn ());
611 if (!src_uses
.is_valid ())
615 insn_change
use_change (use_insn
);
616 use_change
.new_uses
= merge_access_arrays (attempt
, use_change
.new_uses
,
618 if (!use_change
.new_uses
.is_valid ())
621 /* ??? We could allow movement within the EBB by adding:
623 use_change.move_range = use_insn->ebb ()->insn_range (); */
624 if (!restrict_movement (use_change
))
627 return (try_fwprop_subst_pattern (attempt
, use_change
, def
, loc
, dest
, src
)
628 || try_fwprop_subst_notes (use_insn
, def
, dest
, src
));
631 /* For the given single_set INSN, containing SRC known to be a
632 ZERO_EXTEND or SIGN_EXTEND of a register, return true if INSN
633 is redundant due to the register being set by a LOAD_EXTEND_OP
637 free_load_extend (rtx src
, insn_info
*insn
)
639 rtx reg
= XEXP (src
, 0);
640 if (load_extend_op (GET_MODE (reg
)) != GET_CODE (src
))
643 def_info
*def
= nullptr;
644 for (use_info
*use
: insn
->uses ())
645 if (use
->regno () == REGNO (reg
))
654 insn_info
*def_insn
= def
->insn ();
655 if (def_insn
->is_artificial ())
658 rtx_insn
*def_rtl
= def_insn
->rtl ();
659 if (NONJUMP_INSN_P (def_rtl
))
661 rtx patt
= PATTERN (def_rtl
);
663 if (GET_CODE (patt
) == SET
664 && GET_CODE (SET_SRC (patt
)) == MEM
665 && rtx_equal_p (SET_DEST (patt
), reg
))
671 /* Subroutine of forward_propagate_subreg that handles a use of DEST
672 in REF. The other parameters are the same. */
675 forward_propagate_subreg (use_info
*use
, set_info
*def
,
676 rtx dest
, rtx src
, df_ref ref
)
678 scalar_int_mode int_use_mode
, src_mode
;
680 /* Only consider subregs... */
681 rtx use_reg
= DF_REF_REG (ref
);
682 machine_mode use_mode
= GET_MODE (use_reg
);
683 if (GET_CODE (use_reg
) != SUBREG
684 || GET_MODE (SUBREG_REG (use_reg
)) != GET_MODE (dest
))
687 /* ??? Replacing throughout the pattern would help for match_dups. */
688 rtx
*loc
= DF_REF_LOC (ref
);
689 if (paradoxical_subreg_p (use_reg
))
691 /* If this is a paradoxical SUBREG, we have no idea what value the
692 extra bits would have. However, if the operand is equivalent to
693 a SUBREG whose operand is the same as our mode, and all the modes
694 are within a word, we can just use the inner operand because
695 these SUBREGs just say how to treat the register. */
696 if (GET_CODE (src
) == SUBREG
697 && REG_P (SUBREG_REG (src
))
698 && REGNO (SUBREG_REG (src
)) >= FIRST_PSEUDO_REGISTER
699 && GET_MODE (SUBREG_REG (src
)) == use_mode
700 && subreg_lowpart_p (src
))
701 return try_fwprop_subst (use
, def
, loc
, use_reg
, SUBREG_REG (src
));
704 /* If this is a SUBREG of a ZERO_EXTEND or SIGN_EXTEND, and the SUBREG
705 is the low part of the reg being extended then just use the inner
706 operand. Don't do this if the ZERO_EXTEND or SIGN_EXTEND insn will
707 be removed due to it matching a LOAD_EXTEND_OP load from memory,
708 or due to the operation being a no-op when applied to registers.
709 For example, if we have:
711 A: (set (reg:DI X) (sign_extend:DI (reg:SI Y)))
712 B: (... (subreg:SI (reg:DI X)) ...)
714 and mode_rep_extended says that Y is already sign-extended,
715 the backend will typically allow A to be combined with the
716 definition of Y or, failing that, allow A to be deleted after
717 reload through register tying. Introducing more uses of Y
718 prevents both optimisations. */
719 else if (is_a
<scalar_int_mode
> (use_mode
, &int_use_mode
)
720 && subreg_lowpart_p (use_reg
))
722 if ((GET_CODE (src
) == ZERO_EXTEND
723 || GET_CODE (src
) == SIGN_EXTEND
)
724 && is_a
<scalar_int_mode
> (GET_MODE (src
), &src_mode
)
725 && REG_P (XEXP (src
, 0))
726 && REGNO (XEXP (src
, 0)) >= FIRST_PSEUDO_REGISTER
727 && GET_MODE (XEXP (src
, 0)) == use_mode
728 && !free_load_extend (src
, def
->insn ())
729 && (targetm
.mode_rep_extended (int_use_mode
, src_mode
)
730 != (int) GET_CODE (src
)))
731 return try_fwprop_subst (use
, def
, loc
, use_reg
, XEXP (src
, 0));
737 /* Try to substitute (set DEST SRC), which defines DEF, into USE and simplify
738 the result, handling cases where DEST is used in a subreg and where
739 applying that subreg to SRC results in a useful simplification. */
742 forward_propagate_subreg (use_info
*use
, set_info
*def
, rtx dest
, rtx src
)
744 if (!use
->includes_subregs () || !REG_P (dest
))
747 if (GET_CODE (src
) != SUBREG
748 && GET_CODE (src
) != ZERO_EXTEND
749 && GET_CODE (src
) != SIGN_EXTEND
)
752 rtx_insn
*use_rtl
= use
->insn ()->rtl ();
755 FOR_EACH_INSN_USE (ref
, use_rtl
)
756 if (DF_REF_REGNO (ref
) == use
->regno ()
757 && forward_propagate_subreg (use
, def
, dest
, src
, ref
))
760 FOR_EACH_INSN_EQ_USE (ref
, use_rtl
)
761 if (DF_REF_REGNO (ref
) == use
->regno ()
762 && forward_propagate_subreg (use
, def
, dest
, src
, ref
))
768 /* Try to substitute (set DEST SRC), which defines DEF, into USE and
769 simplify the result. */
772 forward_propagate_and_simplify (use_info
*use
, set_info
*def
,
775 insn_info
*use_insn
= use
->insn ();
776 rtx_insn
*use_rtl
= use_insn
->rtl ();
777 insn_info
*def_insn
= def
->insn ();
779 /* ??? This check seems unnecessary. We should be able to propagate
780 into any kind of instruction, regardless of whether it's a single set.
781 It seems odd to be more permissive with asms than normal instructions. */
782 bool need_single_set
= (!use_insn
->is_asm () && !use_insn
->is_debug_insn ());
783 rtx use_set
= single_set (use_rtl
);
784 if (need_single_set
&& !use_set
)
787 /* Do not propagate into PC etc.
789 ??? This too seems unnecessary. The current code should work correctly
790 without it, including cases where jumps become unconditional. */
791 if (use_set
&& GET_MODE (SET_DEST (use_set
)) == VOIDmode
)
794 /* In __asm don't replace if src might need more registers than
795 reg, as that could increase register pressure on the __asm. */
796 if (use_insn
->is_asm () && def_insn
->uses ().size () > 1)
799 /* Check if the def is loading something from the constant pool; in this
800 case we would undo optimization such as compress_float_constant.
801 Still, we can set a REG_EQUAL note. */
802 if (MEM_P (src
) && MEM_READONLY_P (src
))
804 rtx x
= avoid_constant_pool_reference (src
);
807 && (note_set
= set_for_reg_notes (use_rtl
))
808 && REG_P (SET_DEST (note_set
))
809 && !contains_paradoxical_subreg_p (SET_SRC (note_set
)))
811 rtx note
= find_reg_note (use_rtl
, REG_EQUAL
, NULL_RTX
);
812 rtx old_rtx
= note
? XEXP (note
, 0) : SET_SRC (note_set
);
813 rtx new_rtx
= simplify_replace_rtx (old_rtx
, src
, x
);
814 if (old_rtx
!= new_rtx
)
815 set_unique_reg_note (use_rtl
, REG_EQUAL
, copy_rtx (new_rtx
));
820 /* ??? Unconditionally propagating into PATTERN would work better
821 for instructions that have match_dups. */
822 rtx
*loc
= need_single_set
? &use_set
: &PATTERN (use_rtl
);
823 return try_fwprop_subst (use
, def
, loc
, dest
, src
);
826 /* Given a use USE of an insn, if it has a single reaching
827 definition, try to forward propagate it into that insn.
828 Return true if something changed.
830 REG_PROP_ONLY is true if we should only propagate register copies. */
833 forward_propagate_into (use_info
*use
, bool reg_prop_only
= false)
835 if (use
->includes_read_writes ())
838 /* Disregard uninitialized uses. */
839 set_info
*def
= use
->def ();
843 /* Only consider single-register definitions. This could be relaxed,
844 but it should rarely be needed before RA. */
845 def
= look_through_degenerate_phi (def
);
846 if (def
->includes_multiregs ())
849 /* Only consider uses whose definition comes from a real instruction. */
850 insn_info
*def_insn
= def
->insn ();
851 if (def_insn
->is_artificial ())
854 rtx_insn
*def_rtl
= def_insn
->rtl ();
855 if (!NONJUMP_INSN_P (def_rtl
))
857 /* ??? This seems an unnecessary restriction. We can easily tell
858 which set the definition comes from. */
859 if (multiple_sets (def_rtl
))
861 rtx def_set
= simple_regno_set (PATTERN (def_rtl
), def
->regno ());
865 rtx dest
= SET_DEST (def_set
);
866 rtx src
= SET_SRC (def_set
);
868 /* Allow propagations into a loop only for reg-to-reg copies, since
869 replacing one register by another shouldn't increase the cost.
870 Propagations from inner loop to outer loop should also be ok. */
871 struct loop
*def_loop
= def_insn
->bb ()->cfg_bb ()->loop_father
;
872 struct loop
*use_loop
= use
->bb ()->cfg_bb ()->loop_father
;
874 || (def_loop
!= use_loop
875 && !flow_loop_nested_p (use_loop
, def_loop
)))
876 && (!reg_single_def_p (dest
) || !reg_single_def_p (src
)))
879 /* Don't substitute into a non-local goto, this confuses CFG. */
880 insn_info
*use_insn
= use
->insn ();
881 rtx_insn
*use_rtl
= use_insn
->rtl ();
883 && find_reg_note (use_rtl
, REG_NON_LOCAL_GOTO
, NULL_RTX
))
886 if (forward_propagate_and_simplify (use
, def
, dest
, src
)
887 || forward_propagate_subreg (use
, def
, dest
, src
))
897 calculate_dominance_info (CDI_DOMINATORS
);
899 /* We do not always want to propagate into loops, so we have to find
900 loops and be careful about them. Avoid CFG modifications so that
901 we don't have to update dominance information afterwards for
902 build_single_def_use_links. */
903 loop_optimizer_init (AVOID_CFG_MODIFICATIONS
);
906 crtl
->ssa
= new rtl_ssa::function_info (cfun
);
912 loop_optimizer_finalize ();
914 crtl
->ssa
->perform_pending_updates ();
915 free_dominance_info (CDI_DOMINATORS
);
921 delete_trivially_dead_insns (get_insns (), max_reg_num ());
925 "\nNumber of successful forward propagations: %d\n\n",
929 /* Try to optimize INSN, returning true if something changes.
930 FWPROP_ADDR_P is true if we are running fwprop_addr rather than
934 fwprop_insn (insn_info
*insn
, bool fwprop_addr_p
)
936 for (use_info
*use
: insn
->uses ())
940 /* ??? The choices here follow those in the pre-SSA code. */
941 if (!use
->includes_address_uses ())
943 if (forward_propagate_into (use
, fwprop_addr_p
))
948 struct loop
*loop
= insn
->bb ()->cfg_bb ()->loop_father
;
949 /* The outermost loop is not really a loop. */
950 if (loop
== NULL
|| loop_outer (loop
) == NULL
)
952 if (forward_propagate_into (use
, fwprop_addr_p
))
955 else if (fwprop_addr_p
)
957 if (forward_propagate_into (use
, false))
965 /* Main entry point. */
970 return optimize
> 0 && flag_forward_propagate
;
974 fwprop (bool fwprop_addr_p
)
978 /* Go through all the instructions (including debug instructions) looking
979 for uses that we could propagate into.
981 Do not forward propagate addresses into loops until after unrolling.
982 CSE did so because it was able to fix its own mess, but we are not. */
986 /* ??? This code uses a worklist in order to preserve the behavior
987 of the pre-SSA implementation. It would be better to instead
988 iterate on each instruction until no more propagations are
989 possible, then move on to the next. */
990 auto_vec
<insn_info
*> worklist
;
991 for (insn_info
*insn
= crtl
->ssa
->first_insn (); insn
; insn
= next
)
993 next
= insn
->next_any_insn ();
994 if (insn
->can_be_optimized () || insn
->is_debug_insn ())
995 if (fwprop_insn (insn
, fwprop_addr_p
))
996 worklist
.safe_push (insn
);
998 for (unsigned int i
= 0; i
< worklist
.length (); ++i
)
1000 insn_info
*insn
= worklist
[i
];
1001 if (fwprop_insn (insn
, fwprop_addr_p
))
1002 worklist
.safe_push (insn
);
1011 const pass_data pass_data_rtl_fwprop
=
1013 RTL_PASS
, /* type */
1014 "fwprop1", /* name */
1015 OPTGROUP_NONE
, /* optinfo_flags */
1016 TV_FWPROP
, /* tv_id */
1017 0, /* properties_required */
1018 0, /* properties_provided */
1019 0, /* properties_destroyed */
1020 0, /* todo_flags_start */
1021 TODO_df_finish
, /* todo_flags_finish */
1024 class pass_rtl_fwprop
: public rtl_opt_pass
1027 pass_rtl_fwprop (gcc::context
*ctxt
)
1028 : rtl_opt_pass (pass_data_rtl_fwprop
, ctxt
)
1031 /* opt_pass methods: */
1032 virtual bool gate (function
*) { return gate_fwprop (); }
1033 virtual unsigned int execute (function
*) { return fwprop (false); }
1035 }; // class pass_rtl_fwprop
1040 make_pass_rtl_fwprop (gcc::context
*ctxt
)
1042 return new pass_rtl_fwprop (ctxt
);
1047 const pass_data pass_data_rtl_fwprop_addr
=
1049 RTL_PASS
, /* type */
1050 "fwprop2", /* name */
1051 OPTGROUP_NONE
, /* optinfo_flags */
1052 TV_FWPROP
, /* tv_id */
1053 0, /* properties_required */
1054 0, /* properties_provided */
1055 0, /* properties_destroyed */
1056 0, /* todo_flags_start */
1057 TODO_df_finish
, /* todo_flags_finish */
1060 class pass_rtl_fwprop_addr
: public rtl_opt_pass
1063 pass_rtl_fwprop_addr (gcc::context
*ctxt
)
1064 : rtl_opt_pass (pass_data_rtl_fwprop_addr
, ctxt
)
1067 /* opt_pass methods: */
1068 virtual bool gate (function
*) { return gate_fwprop (); }
1069 virtual unsigned int execute (function
*) { return fwprop (true); }
1071 }; // class pass_rtl_fwprop_addr
1076 make_pass_rtl_fwprop_addr (gcc::context
*ctxt
)
1078 return new pass_rtl_fwprop_addr (ctxt
);