Merge trunk version 213968 into gupc branch.
[official-gcc.git] / zlib / inftrees.c
blobabcd7c45ed354df856a76c6060a26be51d830804
1 /* inftrees.c -- generate Huffman trees for efficient decoding
2 * Copyright (C) 1995-2012 Mark Adler
3 * For conditions of distribution and use, see copyright notice in zlib.h
4 */
6 #include "zutil.h"
7 #include "inftrees.h"
9 #define MAXBITS 15
11 const char inflate_copyright[] =
12 " inflate 1.2.7 Copyright 1995-2012 Mark Adler ";
14 If you use the zlib library in a product, an acknowledgment is welcome
15 in the documentation of your product. If for some reason you cannot
16 include such an acknowledgment, I would appreciate that you keep this
17 copyright string in the executable of your product.
21 Build a set of tables to decode the provided canonical Huffman code.
22 The code lengths are lens[0..codes-1]. The result starts at *table,
23 whose indices are 0..2^bits-1. work is a writable array of at least
24 lens shorts, which is used as a work area. type is the type of code
25 to be generated, CODES, LENS, or DISTS. On return, zero is success,
26 -1 is an invalid code, and +1 means that ENOUGH isn't enough. table
27 on return points to the next available entry's address. bits is the
28 requested root table index bits, and on return it is the actual root
29 table index bits. It will differ if the request is greater than the
30 longest code or if it is less than the shortest code.
32 int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
33 codetype type;
34 unsigned short FAR *lens;
35 unsigned codes;
36 code FAR * FAR *table;
37 unsigned FAR *bits;
38 unsigned short FAR *work;
40 unsigned len; /* a code's length in bits */
41 unsigned sym; /* index of code symbols */
42 unsigned min, max; /* minimum and maximum code lengths */
43 unsigned root; /* number of index bits for root table */
44 unsigned curr; /* number of index bits for current table */
45 unsigned drop; /* code bits to drop for sub-table */
46 int left; /* number of prefix codes available */
47 unsigned used; /* code entries in table used */
48 unsigned huff; /* Huffman code */
49 unsigned incr; /* for incrementing code, index */
50 unsigned fill; /* index for replicating entries */
51 unsigned low; /* low bits for current root entry */
52 unsigned mask; /* mask for low root bits */
53 code here; /* table entry for duplication */
54 code FAR *next; /* next available space in table */
55 const unsigned short FAR *base; /* base value table to use */
56 const unsigned short FAR *extra; /* extra bits table to use */
57 int end; /* use base and extra for symbol > end */
58 unsigned short count[MAXBITS+1]; /* number of codes of each length */
59 unsigned short offs[MAXBITS+1]; /* offsets in table for each length */
60 static const unsigned short lbase[31] = { /* Length codes 257..285 base */
61 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
62 35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
63 static const unsigned short lext[31] = { /* Length codes 257..285 extra */
64 16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
65 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 78, 68};
66 static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
67 1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
68 257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
69 8193, 12289, 16385, 24577, 0, 0};
70 static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
71 16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
72 23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
73 28, 28, 29, 29, 64, 64};
76 Process a set of code lengths to create a canonical Huffman code. The
77 code lengths are lens[0..codes-1]. Each length corresponds to the
78 symbols 0..codes-1. The Huffman code is generated by first sorting the
79 symbols by length from short to long, and retaining the symbol order
80 for codes with equal lengths. Then the code starts with all zero bits
81 for the first code of the shortest length, and the codes are integer
82 increments for the same length, and zeros are appended as the length
83 increases. For the deflate format, these bits are stored backwards
84 from their more natural integer increment ordering, and so when the
85 decoding tables are built in the large loop below, the integer codes
86 are incremented backwards.
88 This routine assumes, but does not check, that all of the entries in
89 lens[] are in the range 0..MAXBITS. The caller must assure this.
90 1..MAXBITS is interpreted as that code length. zero means that that
91 symbol does not occur in this code.
93 The codes are sorted by computing a count of codes for each length,
94 creating from that a table of starting indices for each length in the
95 sorted table, and then entering the symbols in order in the sorted
96 table. The sorted table is work[], with that space being provided by
97 the caller.
99 The length counts are used for other purposes as well, i.e. finding
100 the minimum and maximum length codes, determining if there are any
101 codes at all, checking for a valid set of lengths, and looking ahead
102 at length counts to determine sub-table sizes when building the
103 decoding tables.
106 /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
107 for (len = 0; len <= MAXBITS; len++)
108 count[len] = 0;
109 for (sym = 0; sym < codes; sym++)
110 count[lens[sym]]++;
112 /* bound code lengths, force root to be within code lengths */
113 root = *bits;
114 for (max = MAXBITS; max >= 1; max--)
115 if (count[max] != 0) break;
116 if (root > max) root = max;
117 if (max == 0) { /* no symbols to code at all */
118 here.op = (unsigned char)64; /* invalid code marker */
119 here.bits = (unsigned char)1;
120 here.val = (unsigned short)0;
121 *(*table)++ = here; /* make a table to force an error */
122 *(*table)++ = here;
123 *bits = 1;
124 return 0; /* no symbols, but wait for decoding to report error */
126 for (min = 1; min < max; min++)
127 if (count[min] != 0) break;
128 if (root < min) root = min;
130 /* check for an over-subscribed or incomplete set of lengths */
131 left = 1;
132 for (len = 1; len <= MAXBITS; len++) {
133 left <<= 1;
134 left -= count[len];
135 if (left < 0) return -1; /* over-subscribed */
137 if (left > 0 && (type == CODES || max != 1))
138 return -1; /* incomplete set */
140 /* generate offsets into symbol table for each length for sorting */
141 offs[1] = 0;
142 for (len = 1; len < MAXBITS; len++)
143 offs[len + 1] = offs[len] + count[len];
145 /* sort symbols by length, by symbol order within each length */
146 for (sym = 0; sym < codes; sym++)
147 if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
150 Create and fill in decoding tables. In this loop, the table being
151 filled is at next and has curr index bits. The code being used is huff
152 with length len. That code is converted to an index by dropping drop
153 bits off of the bottom. For codes where len is less than drop + curr,
154 those top drop + curr - len bits are incremented through all values to
155 fill the table with replicated entries.
157 root is the number of index bits for the root table. When len exceeds
158 root, sub-tables are created pointed to by the root entry with an index
159 of the low root bits of huff. This is saved in low to check for when a
160 new sub-table should be started. drop is zero when the root table is
161 being filled, and drop is root when sub-tables are being filled.
163 When a new sub-table is needed, it is necessary to look ahead in the
164 code lengths to determine what size sub-table is needed. The length
165 counts are used for this, and so count[] is decremented as codes are
166 entered in the tables.
168 used keeps track of how many table entries have been allocated from the
169 provided *table space. It is checked for LENS and DIST tables against
170 the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
171 the initial root table size constants. See the comments in inftrees.h
172 for more information.
174 sym increments through all symbols, and the loop terminates when
175 all codes of length max, i.e. all codes, have been processed. This
176 routine permits incomplete codes, so another loop after this one fills
177 in the rest of the decoding tables with invalid code markers.
180 /* set up for code type */
181 switch (type) {
182 case CODES:
183 base = extra = work; /* dummy value--not used */
184 end = 19;
185 break;
186 case LENS:
187 base = lbase;
188 base -= 257;
189 extra = lext;
190 extra -= 257;
191 end = 256;
192 break;
193 default: /* DISTS */
194 base = dbase;
195 extra = dext;
196 end = -1;
199 /* initialize state for loop */
200 huff = 0; /* starting code */
201 sym = 0; /* starting code symbol */
202 len = min; /* starting code length */
203 next = *table; /* current table to fill in */
204 curr = root; /* current table index bits */
205 drop = 0; /* current bits to drop from code for index */
206 low = (unsigned)(-1); /* trigger new sub-table when len > root */
207 used = 1U << root; /* use root table entries */
208 mask = used - 1; /* mask for comparing low */
210 /* check available table space */
211 if ((type == LENS && used >= ENOUGH_LENS) ||
212 (type == DISTS && used >= ENOUGH_DISTS))
213 return 1;
215 /* process all codes and make table entries */
216 for (;;) {
217 /* create table entry */
218 here.bits = (unsigned char)(len - drop);
219 if ((int)(work[sym]) < end) {
220 here.op = (unsigned char)0;
221 here.val = work[sym];
223 else if ((int)(work[sym]) > end) {
224 here.op = (unsigned char)(extra[work[sym]]);
225 here.val = base[work[sym]];
227 else {
228 here.op = (unsigned char)(32 + 64); /* end of block */
229 here.val = 0;
232 /* replicate for those indices with low len bits equal to huff */
233 incr = 1U << (len - drop);
234 fill = 1U << curr;
235 min = fill; /* save offset to next table */
236 do {
237 fill -= incr;
238 next[(huff >> drop) + fill] = here;
239 } while (fill != 0);
241 /* backwards increment the len-bit code huff */
242 incr = 1U << (len - 1);
243 while (huff & incr)
244 incr >>= 1;
245 if (incr != 0) {
246 huff &= incr - 1;
247 huff += incr;
249 else
250 huff = 0;
252 /* go to next symbol, update count, len */
253 sym++;
254 if (--(count[len]) == 0) {
255 if (len == max) break;
256 len = lens[work[sym]];
259 /* create new sub-table if needed */
260 if (len > root && (huff & mask) != low) {
261 /* if first time, transition to sub-tables */
262 if (drop == 0)
263 drop = root;
265 /* increment past last table */
266 next += min; /* here min is 1 << curr */
268 /* determine length of next table */
269 curr = len - drop;
270 left = (int)(1 << curr);
271 while (curr + drop < max) {
272 left -= count[curr + drop];
273 if (left <= 0) break;
274 curr++;
275 left <<= 1;
278 /* check for enough space */
279 used += 1U << curr;
280 if ((type == LENS && used >= ENOUGH_LENS) ||
281 (type == DISTS && used >= ENOUGH_DISTS))
282 return 1;
284 /* point entry in root table to sub-table */
285 low = huff & mask;
286 (*table)[low].op = (unsigned char)curr;
287 (*table)[low].bits = (unsigned char)root;
288 (*table)[low].val = (unsigned short)(next - *table);
292 /* fill in remaining table entry if code is incomplete (guaranteed to have
293 at most one remaining entry, since if the code is incomplete, the
294 maximum code length that was allowed to get this far is one bit) */
295 if (huff != 0) {
296 here.op = (unsigned char)64; /* invalid code marker */
297 here.bits = (unsigned char)(len - drop);
298 here.val = (unsigned short)0;
299 next[huff] = here;
302 /* set return parameters */
303 *table += used;
304 *bits = root;
305 return 0;