1 BUILDING(8) NetBSD System Manager's Manual BUILDING(8)
4 BUILDING -- Procedure for building NetBSD from source code.
7 NetBSD is designed to be buildable on most POSIX-compliant host systems.
8 The basic build procedure is the same whether compiling natively (on the
9 same NetBSD architecture) or cross compiling (on another architecture or
12 This source tree contains a special subtree, ``tools'', which uses the
13 host system to create a build toolchain for the target architecture. The
14 host system must have at least C and C++ compilers in order to create the
15 toolchain (make is not required); all other tools are created as part of
16 the NetBSD build process. (See the environment variables section below
17 if you need to override or manually select your compilers.)
22 This document (in -mdoc troff format; the original copy).
24 BUILDING This document (in plaintext).
27 Special notes for cross-hosting a NetBSD build on non-
30 Makefile The main Makefile for NetBSD; should only be run for
31 native builds with an appropriately up-to-date version of
32 NetBSD make(1). (For building from out-of-date systems or
33 on a non-native host, see the build.sh shell script.)
35 UPDATING Special notes for updating from an earlier revision of
36 NetBSD. It is important to read this file before every
37 build of an updated source tree.
39 build.sh Bourne-compatible shell script used for building the host
40 build tools and the NetBSD system from scratch. Can be
41 used for both native and cross builds, and should be used
42 instead of make(1) for any source tree that is updated and
45 crypto/dist/, dist/, gnu/dist/
46 Sources imported verbatim from third parties, without man-
47 gling the existing build structure. Other source trees in
48 bin through usr.sbin use the NetBSD make(1) ``reachover''
49 Makefile semantics when building these programs for a
53 Sources for items used when making a full release snap-
54 shot, such as files installed in DESTDIR/etc on the desti-
55 nation system, boot media, and release notes.
58 Regression test harness. Can be cross-compiled, but only
59 run natively. tests/ uses the atf(7) test framework;
60 regress/ contains older tests that have not yet been
63 sys/ NetBSD kernel sources.
65 tools/ ``Reachover'' build structure for the host build tools.
66 This has a special method of determining out-of-date sta-
70 Sources to the NetBSD userland (non-kernel) programs. If
71 any of these directories are missing, they will be skipped
74 x11/ ``Reachover'' build structure for X11R6; the source is in
78 The NetBSD build tree is described in hier(7), and the release layout is
79 described in release(7).
83 Several environment variables control the behaviour of NetBSD builds.
85 HOST_SH Path name to a POSIX-compliant shell. If this is not
86 set explicitly, then the default is set using heuris-
87 tics dependent on the host platform, or from the shell
88 under which build.sh is executed (if that can be deter-
89 mined), or using the first copy of sh found in PATH.
90 If the host system's /bin/sh is not POSIX-compliant, we
91 suggest that you build using commands like
93 HOST_SH=/path/to/working/shell
95 ${HOST_SH} build.sh [options]
97 HOST_CC Path name to C compiler used to create the toolchain.
99 HOST_CXX Path name to C++ compiler used to create the toolchain.
101 MACHINE Machine type, e.g., ``macppc''.
103 MACHINE_ARCH Machine architecture, e.g., ``powerpc''.
105 MAKE Path name to invoke make(1) as.
107 MAKEFLAGS Flags to invoke make(1) with.
109 MAKEOBJDIR Directory to use as the .OBJDIR for the current direc-
110 tory. The value is subjected to variable expansion by
111 make(1). Typical usage is to set this variable to a
112 value involving the use of `${.CURDIR:S...}' or
113 `${.CURDIR:C...}', to derive the value of .OBJDIR from
114 the value of .CURDIR. Used only if MAKEOBJDIRPREFIX is
115 not defined. MAKEOBJDIR can be provided only in the
116 environment or via the -O flag of build.sh; it cannot
117 usefully be set inside a Makefile, including mk.conf or
120 MAKEOBJDIRPREFIX Top level directory of the object directory tree. The
121 value is subjected to variable expansion by make(1).
122 build.sh will create the ${MAKEOBJDIRPREFIX} directory
123 if necessary, but if make(1) is used without build.sh,
124 then rules in <bsd.obj.mk> will abort the build if the
125 ${MAKEOBJDIRPREFIX} directory does not exist. If the
126 value is defined and valid, then ${MAKEOBJDIRPRE-
127 FIX}/${.CURDIR} is used as the .OBJDIR for the current
128 directory. The current directory may be read only.
129 MAKEOBJDIRPREFIX can be provided only in the environ-
130 ment or via the -M flag of build.sh; it cannot usefully
131 be set inside a Makefile, including mk.conf or
135 Several variables control the behavior of NetBSD builds. Unless other-
136 wise specified, these variables may be set in either the process environ-
137 ment or the make(1) configuration file specified by MAKECONF.
139 BUILDID Identifier for the build. The identifier will be appended to
140 object directory names, and can be consulted in the make(1)
141 configuration file in order to set additional build parame-
142 ters, such as compiler flags.
144 BUILDSEED GCC uses random numbers when compiling C++ code. This vari-
145 able seeds the gcc random number generator using the -fran-
146 dom-seed flag with this value. By default, it is set to
147 NetBSD-(majorversion). Using a fixed value causes C++ bina-
148 ries to be the same when built from the same sources, result-
149 ing in identical (reproducible) builds. Additional informa-
150 tion is available in the GCC documentation of -frandom-seed.
152 DESTDIR Directory to contain the built NetBSD system. If set, spe-
153 cial options are passed to the compilation tools to prevent
154 their default use of the host system's /usr/include,
155 /usr/lib, and so forth. This pathname must be an absolute
156 path, and should not end with a slash (/) character. (For
157 installation into the system's root directory, set DESTDIR to
158 an empty string, not to ``/''). The directory must reside on
159 a file system which supports long file names and hard links.
161 Default: Empty string if USETOOLS is ``yes''; unset other-
164 Note: build.sh will provide a default of destdir.MACHINE (in
165 the top-level .OBJDIR) unless run in `expert' mode.
167 MAKECONF The name of the make(1) configuration file. Only settable in
168 the process environment.
170 Default: ``/etc/mk.conf''
173 Level of verbosity of status messages. Supported values:
175 0 No descriptive messages or commands executed by make(1)
178 1 Brief messages are shown describing what is being done,
179 but the actual commands executed by make(1) are not dis-
182 2 Descriptive messages are shown as above (prefixed with a
183 `#'), and ordinary commands performed by make(1) are
186 3 In addition to the above, all commands performed by
187 make(1) are displayed, even if they would ordinarily
188 have been hidden through use of the ``@'' prefix in the
191 4 In addition to the above, commands executed by make(1)
192 are traced through use of the sh(1) ``-x'' flag.
196 MKCATPAGES Can be set to ``yes'' or ``no''. Indicates whether prefor-
197 matted plaintext manual pages will be created during a build.
201 MKCRYPTO Can be set to ``yes'' or ``no''. Indicates whether crypto-
202 graphic code will be included in a build; provided for the
203 benefit of countries that do not allow strong cryptography.
204 Will not affect use of the standard low-security password
205 encryption system, crypt(3).
209 MKDOC Can be set to ``yes'' or ``no''. Indicates whether system
210 documentation destined for DESTDIR/usr/share/doc will be
211 installed during a build.
215 MKHTML Can be set to ``yes'' or ``no''. Indicates whether prefor-
216 matted HTML manual pages will be built and installed
220 MKHOSTOBJ Can be set to ``yes'' or ``no''. If set to ``yes'', then for
221 programs intended to be run on the compile host, the name,
222 release, and architecture of the host operating system will
223 be suffixed to the name of the object directory created by
224 ``make obj''. (This allows multiple host systems to compile
225 NetBSD for a single target.) If set to ``no'', then programs
226 built to be run on the compile host will use the same object
227 directory names as programs built to be run on the target.
231 MKINFO Can be set to ``yes'' or ``no''. Indicates whether GNU Info
232 files, used for the documentation for most of the compilation
233 tools, will be created and installed during a build.
237 MKLINT Can be set to ``yes'' or ``no''. Indicates whether lint(1)
238 will be run against portions of the NetBSD source code during
239 the build, and whether lint libraries will be installed into
240 DESTDIR/usr/libdata/lint.
244 MKMAN Can be set to ``yes'' or ``no''. Indicates whether manual
245 pages will be installed during a build.
249 MKNLS Can be set to ``yes'' or ``no''. Indicates whether Native
250 Language System locale zone files will be compiled and
251 installed during a build.
255 MKOBJ Can be set to ``yes'' or ``no''. Indicates whether object
256 directories will be created when running ``make obj''. If
257 set to ``no'', then all built files will be located inside
258 the regular source tree.
262 Note that setting MKOBJ to ``no'' is not recommended and may
263 cause problems when updating the tree with cvs(1).
265 MKPIC Can be set to ``yes'' or ``no''. Indicates whether shared
266 objects and libraries will be created and installed during a
267 build. If set to ``no'', the entire built system will be
270 Default: Platform dependent. As of this writing, all plat-
271 forms except sh3 default to ``yes''.
274 Can be set to ``yes'' or ``no''. Indicates whether the ar(1)
275 format libraries (lib*_pic.a), used to generate shared
276 libraries, are installed during a build.
280 MKPROFILE Can be set to ``yes'' or ``no''. Indicates whether profiled
281 libraries (lib*_p.a) will be built and installed during a
284 Default: ``yes''; however, some platforms turn off MKPROFILE
285 by default at times due to toolchain problems with profiled
288 MKSHARE Can be set to ``yes'' or ``no''. Indicates whether files
289 destined to reside in DESTDIR/usr/share will be built and
290 installed during a build. If set to ``no'', then all of
291 MKCATPAGES, MKDOC, MKINFO, MKMAN, and MKNLS will be set to
292 ``no'' unconditionally.
297 Can be set to ``yes'' or ``no''. Indicates whether program
298 binaries and shared libraries should be built to include RCS
299 IDs for use with ident(1).
303 MKSUBPIXEL Can be set to ``yes'' or ``no''. For X builds, decides if
304 subpixel rendering code in FreeType is turned on. Turned off
305 by default because of patent issues.
309 MKTTINTERP Can be set to ``yes'' or ``no''. For X builds, decides if
310 the TrueType bytecode interpreter is turned on. See
311 http://www.freetype.org/patents.html for details.
315 MKUNPRIVED Can be set to ``yes'' or ``no''. Indicates whether an
316 unprivileged install will occur. The user, group, permis-
317 sions, and file flags, will not be set on the installed
318 items; instead the information will be appended to a file
319 called METALOG in DESTDIR. The contents of METALOG are used
320 during the generation of the distribution tar files to ensure
321 that the appropriate file ownership is stored.
325 MKUPDATE Can be set to ``yes'' or ``no''. Indicates whether all
326 install operations intended to write to DESTDIR will compare
327 file timestamps before installing, and skip the install phase
328 if the destination files are up-to-date. This also has
329 implications on full builds (see next subsection).
333 MKX11 Can be set to ``yes'' or ``no''. Indicates whether X11 is
334 built from X11SRCDIR.
338 TOOLDIR Directory to hold the host tools, once built. If specified,
339 must be an absolute path. This directory should be unique to
340 a given host system and NetBSD source tree. (However, multi-
341 ple targets may share the same TOOLDIR; the target-dependent
342 files have unique names.) If unset, a default based on the
343 uname(1) information of the host platform will be created in
348 USETOOLS Indicates whether the tools specified by TOOLDIR should be
349 used as part of a build in progress. Must be set to ``yes''
352 yes Use the tools from TOOLDIR.
354 no Do not use the tools from TOOLDIR, but refuse to build
355 native compilation tool components that are version-
356 specific for that tool.
358 never Do not use the tools from TOOLDIR, even when building
359 native tool components. This is similar to the tradi-
360 tional NetBSD build method, but does not verify that
361 the compilation tools in use are up-to-date enough in
362 order to build the tree successfully. This may cause
363 build or runtime problems when building the whole
366 Default: ``yes'', unless TOOLCHAIN_MISSING is set to ``yes''.
368 USETOOLS is also set to ``no'' when using <bsd.*.mk> outside
369 the NetBSD source tree.
371 X11SRCDIR Directory containing the X11R6 source. If specified, must be
372 an absolute path. The main X11R6 source is found in
375 Default: NETBSDRCDIR/../xsrc, if that exists; otherwise
378 X11FLAVOUR The style of X11 cross-built, set to either ``Xorg'' or
381 Default: ``Xorg'' on amd64, i386, macppc, shark and sparc64
382 platforms, ``XFree86'' on everything else.
384 "make" variables for full builds
385 These variables only affect the top level ``Makefile'' and do not affect
386 manually building subtrees of the NetBSD source code.
388 INSTALLWORLDDIR Location for the ``make installworld'' target to install
389 to. If specified, must be an absolute path.
393 MKOBJDIRS Can be set to ``yes'' or ``no''. Indicates whether
394 object directories will be created automatically (via a
395 ``make obj'' pass) at the start of a build.
399 If using build.sh, the default is ``yes''. This may be
400 set back to ``no'' by giving build.sh the -o option.
402 MKUPDATE Can be set to ``yes'' or ``no''. If set, then in addi-
403 tion to the effects described for MKUPDATE=yes above,
404 this implies the effects of NOCLEANDIR (i.e., ``make
405 cleandir'' is avoided).
409 If using build.sh, this may be set by giving the -u
412 NBUILDJOBS Now obsolete. Use the make(1) option -j, instead. See
417 NOCLEANDIR If set, avoids the ``make cleandir'' phase of a full
418 build. This has the effect of allowing only changed
419 files in a source tree to be recompiled. This can speed
420 up builds when updating only a few files in the tree.
426 NODISTRIBDIRS If set, avoids the ``make distrib-dirs'' phase of a full
427 build. This skips running mtree(8) on DESTDIR, useful
428 on systems where building as an unprivileged user, or
429 where it is known that the system-wide mtree files have
434 NOINCLUDES If set, avoids the ``make includes'' phase of a full
435 build. This has the effect of preventing make(1) from
436 thinking that some programs are out-of-date simply
437 because the system include files have changed. However,
438 this option should not be used when updating the entire
439 NetBSD source tree arbitrarily; it is suggested to use
440 MKUPDATE=yes instead in that case.
444 RELEASEDIR If set, specifies the directory to which a release(7)
445 layout will be written at the end of a ``make release''.
446 If specified, must be an absolute path.
450 Note: build.sh will provide a default of releasedir (in
451 the top-level .OBJDIR) unless run in `expert' mode.
454 "make" command line options
455 This is not a summary of all the options available to make(1); only the
456 options used most frequently with NetBSD builds are listed here.
458 -j njob Run up to njob make(1) subjobs in parallel. Makefiles should
459 use .WAIT or have explicit dependencies as necessary to
460 enforce build ordering.
462 -m dir Specify the default directory for searching for system Make-
463 file segments, mainly the <bsd.*.mk> files. When building any
464 full NetBSD source tree, this should be set to the
465 ``share/mk'' directory in the source tree. This is set auto-
466 matically when building from the top level, or when using
469 -n Display the commands that would have been executed, but do not
470 actually execute them. This will still cause recursion to
473 -V var Print make(1)'s idea of the value of var. Does not build any
476 var=value Set the variable var to value, overriding any setting speci-
477 fied by the process environment, the MAKECONF configuration
478 file, or the system Makefile segments.
481 These default targets may be built by running make(1) in any subtree of
482 the NetBSD source code. It is recommended that none of these be used
483 from the top level Makefile; as a specific exception, ``make obj'' and
484 ``make cleandir'' are useful in that context.
486 all Build programs, libraries, and preformatted documentation.
488 clean Remove program and library object code files.
490 cleandir Same as clean, but also remove preformatted documentation,
491 dependency files generated by ``make depend'', and any other
492 files known to be created at build time.
494 depend Create dependency files (.depend) containing more detailed
495 information about the dependencies of source code on header
496 files. Allows programs to be recompiled automatically when a
499 dependall Does a ``make depend'' immediately followed by a ``make all''.
500 This improves cache locality of the build since both passes
501 read the source files in their entirety.
503 distclean Synonym for cleandir.
505 includes Build and install system header files. Typically needed
506 before any system libraries or programs can be built.
508 install Install programs, libraries, and documentation into DESTDIR.
509 Few files will be installed to DESTDIR/dev, DESTDIR/etc,
510 DESTDIR/root or DESTDIR/var in order to prevent user supplied
511 configuration data from being overwritten.
513 lint Run lint(1) against the C source code, where appropriate, and
514 generate system-installed lint libraries.
516 obj Create object directories to be used for built files, instead
517 of building directly in the source tree.
519 tags Create ctags(1) searchable function lists usable by the ex(1)
520 and vi(1) text editors.
522 "make" targets for the top level
523 Additional make(1) targets are usable specifically from the top source
524 level to facilitate building the entire NetBSD source tree.
526 build Build the entire NetBSD system (except the kernel). This
527 orders portions of the source tree such that prerequisites
528 will be built in the proper order.
530 distribution Do a ``make build'', and then install a full distribution
531 (which does not include a kernel) into DESTDIR, including
532 files in DESTDIR/dev, DESTDIR/etc, DESTDIR/root and
535 buildworld As per ``make distribution'', except that it ensures that
536 DESTDIR is not the root directory.
538 installworld Install the distribution from DESTDIR to INSTALLWORLDDIR,
539 which defaults to the root directory. Ensures that
540 INSTALLWORLDDIR is not the root directory if cross compil-
543 The INSTALLSETS environment variable may be set to a list
544 of distribution sets to be installed. By default, all sets
545 except ``etc'' and ``xetc'' are installed, so most files in
546 INSTALLWORLDDIR/etc will not be installed or modified.
548 Note: Before performing this operation with
549 INSTALLWORLDDIR=/, it is highly recommended that you
550 upgrade your kernel and reboot. After performing this
551 operation, it is recommended that you use etcupdate(8) to
552 update files in INSTALLWORLDDIR/etc and that you use
553 postinstall(8) to check for inconsistencies (and possibly
556 sets Create distribution sets from DESTDIR into
557 RELEASEDIR/RELEASEMACHINEDIR/binary/sets. Should be run
558 after ``make distribution'', as ``make build'' alone does
559 not install all of the required files.
561 sourcesets Create source sets of the source tree into
562 RELEASEDIR/source/sets.
564 syspkgs Create syspkgs from DESTDIR into
565 RELEASEDIR/RELEASEMACHINEDIR/binary/syspkgs. Should be run
566 after ``make distribution'', as ``make build'' alone does
567 not install all of the required files.
569 release Do a ``make distribution'', build kernels, distribution
570 media, and install sets (this as per ``make sets''), and
571 then package the system into a standard release layout as
572 described by release(7). This requires that RELEASEDIR be
575 iso-image Create a NetBSD installation CD-ROM image in the
576 RELEASEDIR/iso directory. The CD-ROM file system will have
577 a layout as described in release(7).
579 For most machine types, the CD-ROM will be bootable, and
580 will automatically run the sysinst(8) menu-based installa-
581 tion program, which can be used to install or upgrade a
582 NetBSD system. Bootable CD-ROMs also contain tools that
583 may be useful in repairing a damaged NetBSD installation.
585 Before ``make iso-image'' is attempted, RELEASEDIR must be
586 populated by ``make release'' or equivalent.
588 Note that other, smaller, CD-ROM images may be created in
589 the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc-
590 tory by ``make release''. These smaller images usually
591 contain the same tools as the larger images in
592 RELEASEDIR/iso, but do not contain additional content such
593 as the distribution sets.
595 Note that the mac68k port still uses an older method of
596 creating CD-ROM images. This requires the mkisofs(1) util-
597 ity, which is not part of NetBSD, but which can be
598 installed from pkgsrc/sysutils/cdrtools.
601 Create a NetBSD installation CD-ROM image in the
602 RELEASEDIR/iso directory. The CD-ROM file system will have
603 a layout as described in release(7). It will have top
604 level directories for the machine type and source.
606 For most machine types, the CD-ROM will be bootable, and
607 will automatically run the sysinst(8) menu-based installa-
608 tion program, which can be used to install or upgrade a
609 NetBSD system. Bootable CD-ROMs also contain tools that
610 may be useful in repairing a damaged NetBSD installation.
612 Before ``make iso-image-source'' is attempted, RELEASEDIR
613 must be populated by ``make sourcesets release'' or equiva-
616 Note that other, smaller, CD-ROM images may be created in
617 the RELEASEDIR/RELEASEMACHINEDIR/installation/cdrom direc-
618 tory by ``make release''. These smaller images usually
619 contain the same tools as the larger images in
620 RELEASEDIR/iso, but do not contain additional content such
621 as the distribution sets.
623 Note that the mac68k port still uses an older method of
624 creating CD-ROM images. This requires the mkisofs(1) util-
625 ity, which is not part of NetBSD, but which can be
626 installed from pkgsrc/sysutils/cdrtools.
629 Can only be run after building the regression tests in the
630 directory ``regress''. Runs those compiled regression
631 tests on the local host. Note that most tests are now man-
632 aged instead using atf(7); this target should probably run
633 those as well but currently does not.
635 The "build.sh" script
636 This script file is a Bourne shell script designed to build the entire
637 NetBSD system on any host with a Bourne shell in /bin/sh, including many
638 that are not POSIX compliant. Note that if a host system's /bin/sh is
639 unusually old and broken, the Korn Shell (/bin/ksh), if available, may be
640 a usable alternative.
642 All cross-compile builds, and most native builds, of the entire system
643 should make use of build.sh rather than just running ``make''. This way,
644 the make(1) program will be bootstrapped properly, in case the host sys-
645 tem has an older or incompatible ``make'' program.
647 When compiling the entire system via build.sh, many make(1) variables are
648 set for you in order to help encapsulate the build process. In the list
649 of options below, variables that are automatically set by build.sh are
650 noted where applicable.
652 The following operations are supported by build.sh:
654 build Build the system as per ``make build''. Before the main
655 part of the build commences, this command runs the obj
656 operation (unless the -o option is given), ``make
657 cleandir'' (unless the -u option is given), and the tools
660 distribution Build a full distribution as per ``make distribution''.
661 This command first runs the build operation.
663 release Build a full release as per ``make release''. This command
664 first runs the distribution operation.
666 makewrapper Create the nbmake-MACHINE wrapper. This operation is auto-
667 matically performed for any of the other operations.
669 cleandir Perform ``make cleandir''.
671 obj Perform ``make obj''.
673 tools Build and install the host tools from src/tools. This com-
674 mand will first run ``make obj'' and ``make cleandir'' in
675 the tools subdirectory unless the -o or -u options (respec-
678 install=idir Install the contents of DESTDIR to idir, using ``make
679 installworld''. Note that files that are part of the
680 ``etc'' or ``xetc'' sets will not be installed.
682 kernel=kconf Build a new kernel. The kconf argument is the name of a
683 configuration file suitable for use by config(1). If kconf
684 does not contain any `/' characters, the configuration file
685 is expected to be found in the KERNCONFDIR directory, which
686 is typically sys/arch/MACHINE/conf. The new kernel will be
687 built in a subdirectory of KERNOBJDIR, which is typically
688 sys/arch/MACHINE/compile or an associated object directory.
690 This command does not imply the tools command; run the
691 tools command first unless it is certain that the tools
692 already exist and are up to date.
694 This command will run ``make cleandir'' on the kernel in
695 question first unless the -u option is given.
697 modules This command will build kernel modules and install them
701 Install a gzip(1)ed copy of the kernel previously built by
703 RELEASEDIR/RELEASEMACHINEDIR/binary/kernel, usually as
704 netbsd-kconf.gz, although the ``netbsd'' prefix is deter-
705 mined from the ``config'' directives in kconf.
707 sets Perform ``make sets''.
709 sourcesets Perform ``make sourcesets''.
711 syspkgs Perform ``make syspkgs''.
713 iso-image Perform ``make iso-image''.
716 Perform ``make iso-image-source''.
718 The following command line options alter the behaviour of the build.sh
719 operations described above:
721 -a arch Set the value of MACHINE_ARCH to arch.
724 Set the value of BUILDID to buildid. This will also append the
725 build identifier to the name of the ``make'' wrapper script so
726 that the resulting name is of the form
727 ``nbmake-MACHINE-BUILDID''.
730 Append cdextras to the CDEXTRA variable, which is a space-sepa-
731 rated list of files or directories that will be added to the
732 CD-ROM image that may be create by the ``iso-image'' or
733 ``iso-image-source'' operations. Files will be added to the
734 root of the CD-ROM image, whereas directories will be copied
735 recursively. If relative paths are specified, they will be
736 converted to absolute paths before being used. Multiple paths
737 may be specified via multiple -C options, or via a single
738 option whose argument contains multiple space-separated paths.
740 -D dest Set the value of DESTDIR to dest. If a relative path is speci-
741 fied, it will be converted to an absolute path before being
744 -E Set `expert' mode. This overrides various sanity checks, and
745 allows: DESTDIR does not have to be set to a non-root path for
746 builds, and MKUNPRIVED=yes does not have to be set when build-
747 ing as a non-root user.
749 Note: It is highly recommended that you know what you are doing
750 when you use this option.
752 -h Print a help message.
754 -j njob Run up to njob make(1) subjobs in parallel; passed through to
755 make(1). If you see failures for reasons other than running
756 out of memory while using build.sh with -j, please save com-
757 plete build logs so the failures can be analyzed.
759 To achieve the fastest builds, -j values between (1 + the num-
760 ber of CPUs) and (2 * the number of CPUs) are recommended. Use
761 lower values on machines with limited memory or I/O bandwidth.
763 -M obj Set MAKEOBJDIRPREFIX to obj. Unsets MAKEOBJDIR. See ``-O
764 -obj'' for more information.
766 For instance, if the source directory is /usr/src, a setting of
767 ``-M /usr/obj'' will place build-time files under
768 /usr/obj/usr/src/bin, /usr/obj/usr/src/lib,
769 /usr/obj/usr/src/usr.bin, and so forth.
771 If a relative path is specified, it will be converted to an
772 absolute path before being used. build.sh imposes the restric-
773 tion that the argument to the -M option must not begin with a
774 ``$'' (dollar sign) character; otherwise it would be too diffi-
775 cult to determine whether the value is an absolute or a rela-
776 tive path. If the directory does not already exist, build.sh
779 -m mach Set the value of MACHINE to mach, except in some special cases
780 listed below. This will also override any value of
781 MACHINE_ARCH in the process environment with a value deduced
782 from mach, unless -a is specified. All cross builds require
783 -m, but if unset on a NetBSD host, the host's value of MACHINE
784 will be detected and used automatically.
786 Some machines support multiple values for MACHINE_ARCH. The
787 following special cases for the mach argument are defined to
788 set the listed values of MACHINE and MACHINE_ARCH:
790 mach MACHINE MACHINE_ARCH
791 evbarm evbarm (not set)
792 evbarm-eb evbarm armeb
794 evbmips evbmips (not set)
795 evbmips-eb evbmips mipseb
796 evbmips-el evbmips mipsel
797 evbsh3 evbsh3 (not set)
798 evbsh3-eb evbsh3 sh3eb
799 evbsh3-el evbsh3 sh3el
800 sbmips sbmips (not set)
801 sbmips-eb sbmips mipseb
802 sbmips-el sbmips mipsel
805 Set the ``noisyness'' level of the build, by setting
806 MAKEVERBOSE to noiselevel.
808 -n Show the commands that would be executed by build.sh, but do
809 not make any changes. This is similar in concept to ``make
812 -O obj Create an appropriate transform macro for MAKEOBJDIR that will
813 place the built object files under obj. Unsets
816 For instance, a setting of ``-O /usr/obj'' will place build-
817 time files under /usr/obj/bin, /usr/obj/lib, /usr/obj/usr.bin,
820 If a relative path is specified, it will be converted to an
821 absolute path before being used. build.sh imposes the restric-
822 tion that the argument to the -O option must not contain a
823 ``$'' (dollar sign) character. If the directory does not
824 already exist, build.sh will create it.
826 In normal use, exactly one of the -M or -O options should be
827 specified. If neither -M nor -O is specified, then a default
828 object directory will be chosen according to rules in
829 <bsd.obj.mk>. Relying on this default is not recommended
830 because it is determined by complex rules that are influenced
831 by the values of several variables and by the location of the
834 -o Set the value of MKOBJDIRS to ``no''. Otherwise, it will be
835 automatically set to ``yes''. This default is opposite to the
836 behaviour when not using build.sh.
838 -R rel Set the value of RELEASEDIR to rel. If a relative path is
839 specified, it will be converted to an absolute path before
842 -r Remove the contents of DESTDIR and TOOLDIR before building
843 (provides a clean starting point). This will skip deleting
844 DESTDIR if building on a native system to the root directory.
846 -S seed Change the value of BUILDSEED to seed. This should rarely be
849 -T tools Set the value of TOOLDIR to tools. If a relative path is spec-
850 ified, it will be converted to an absolute path before being
851 used. If set, the bootstrap ``make'' will only be rebuilt if
852 the source files for make(1) have changed.
854 -U Set MKUNPRIVED=yes.
859 Set the environment variable var to an optional value. This is
860 propagated to the nbmake wrapper.
863 Create the nbmake wrapper script (see below) in a custom loca-
864 tion, specified by wrapper. This allows, for instance, to
865 place the wrapper in PATH automatically. Note that wrapper is
866 the full name of the file, not just a directory name. If a
867 relative path is specified, it will be converted to an absolute
868 path before being used.
871 Set the value of X11SRCDIR to x11src. If a relative path is
872 specified, it will be converted to an absolute path before
877 -Z var Unset ("zap") the environment variable var. This is propagated
878 to the nbmake wrapper.
880 The "nbmake-MACHINE" wrapper script
881 If using the build.sh script to build NetBSD, a nbmake-MACHINE script
882 will be created in TOOLDIR/bin upon the first build to assist in building
883 subtrees on a cross-compile host.
885 nbmake-MACHINE can be invoked in lieu of make(1), and will instead call
886 the up-to-date version of ``nbmake'' installed into TOOLDIR/bin with sev-
887 eral key variables pre-set, including MACHINE, MACHINE_ARCH, and TOOLDIR.
888 nbmake-MACHINE will also set variables specified with -V, and unset vari-
889 ables specified with -Z.
891 This script can be symlinked into a directory listed in PATH, or called
892 with an absolute path.
895 1. % ./build.sh [options] tools kernel=GENERIC
897 Build a new toolchain, and use the new toolchain to configure and
898 build a new GENERIC kernel.
900 2. % ./build.sh [options] -U distribution
902 Using unprivileged mode, build a complete distribution to a DESTDIR
903 directory that build.sh selects (and will display).
905 3. # ./build.sh [options] -U install=/
907 As root, install to / the distribution that was built by example 2.
908 Even though this is run as root, -U is required so that the permis-
909 sions stored in DESTDIR/METALOG are correctly applied to the files
910 as they're copied to /.
912 4. % ./build.sh [options] -U -u release
914 Using unprivileged mode, build a complete release to DESTDIR and
915 RELEASEDIR directories that build.sh selects (and will display).
916 MKUPDATE=yes (-u) is set to prevent the ``make cleandir'', so that
917 if this is run after example 2, it doesn't need to redo that portion
918 of the release build.
921 NBUILDJOBS Use the make(1) option -j instead.
924 The new toolchain is now the default. To disable, use
925 TOOLCHAIN_MISSING=yes.
928 make(1), hier(7), release(7), etcupdate(8), postinstall(8), sysinst(8),
929 pkgsrc/sysutils/cdrtools
932 The build.sh based build scheme was introduced for NetBSD 1.6 as
933 USE_NEW_TOOLCHAIN, and re-worked to TOOLCHAIN_MISSING after that.
935 NetBSD May 1, 2009 NetBSD