Fix markup. Fix backslashes to surive roff.
[netbsd-mini2440.git] / usr.sbin / rtsold / rtsold.8
blob53848b83e4290ec3703ab1a1f0448d801ff4d0c0
1 .\"     $NetBSD: rtsold.8,v 1.26 2006/10/08 19:36:05 elad Exp $
2 .\"     $KAME: rtsold.8,v 1.17 2001/07/09 22:30:37 itojun Exp $
3 .\"
4 .\" Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
5 .\" All rights reserved.
6 .\"
7 .\" Redistribution and use in source and binary forms, with or without
8 .\" modification, are permitted provided that the following conditions
9 .\" are met:
10 .\" 1. Redistributions of source code must retain the above copyright
11 .\"    notice, this list of conditions and the following disclaimer.
12 .\" 2. Redistributions in binary form must reproduce the above copyright
13 .\"    notice, this list of conditions and the following disclaimer in the
14 .\"    documentation and/or other materials provided with the distribution.
15 .\" 3. Neither the name of the project nor the names of its contributors
16 .\"    may be used to endorse or promote products derived from this software
17 .\"    without specific prior written permission.
18 .\"
19 .\" THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
20 .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 .\" ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
23 .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 .\" SUCH DAMAGE.
30 .\"
31 .Dd October 8, 2006
32 .Dt RTSOLD 8
33 .Os
34 .\"
35 .Sh NAME
36 .Nm rtsold
37 .Nd router solicitation daemon
38 .\"
39 .Sh SYNOPSIS
40 .Nm rtsold
41 .Op Fl 1Ddfm
42 .Ar interface ...
43 .Nm rtsold
44 .Op Fl 1Ddfm
45 .Fl a
46 .Nm rtsol
47 .Op Fl Dd
48 .Ar interface ...
49 .Nm rtsol
50 .Op Fl Dd
51 .Fl a
52 .\"
53 .Sh DESCRIPTION
54 .Nm
55 is the daemon program to send ICMPv6 Router Solicitation messages
56 on the specified interfaces.
57 If a node (re)attaches to a link,
58 .Nm
59 sends some Router Solicitations on the link destined to the link-local scope
60 all-routers multicast address to discover new routers
61 and to get non link-local addresses.
62 .Pp
63 .Nm
64 should be used on IPv6 hosts
65 .Pq non-router nodes
66 only.
67 .Pp
68 If you invoke the program as
69 .Nm rtsol ,
70 it will transmit probes from the specified
71 .Ar interface ,
72 without becoming a daemon.
73 In other words,
74 .Nm rtsol
75 behaves as
76 .Dq rtsold -f1 interface ... .
77 .Pp
78 Specifically,
79 .Nm
80 sends at most 3 Router Solicitations on an interface
81 after one of the following events:
82 .Bl -bullet
83 .It
84 Just after invocation of
85 .Nm
86 daemon.
87 .It
88 The interface is up after a temporary interface failure.
89 .Nm
90 detects such failures by periodically probing to see if the status
91 of the interface is active or not.
92 Note that some network cards and drivers do not allow the extraction
93 of link state.
94 In such cases,
95 .Nm
96 cannot detect the change of the interface status.
97 .It
98 Every 60 seconds if the
99 .Fl m
100 option is specified and the
102 daemon cannot get the interface status.
103 This feature does not conform to the IPv6 neighbor discovery
104 specification, but is provided for mobile stations.
105 The default interval for router advertisements, which is on the order of 10
106 minutes, is slightly long for mobile stations.
107 This feature is provided
108 for such stations so that they can find new routers as soon as possible
109 when they attach to another link.
112 Once
114 has sent a Router Solicitation, and has received a valid Router Advertisement,
115 it refrains from sending additional solicitations on that interface, until
116 the next time one of the above events occurs.
118 When sending a Router Solicitation on an interface,
120 includes a Source Link-layer address option if the interface
121 has a link-layer address.
123 Upon receipt of signal
124 .Dv SIGUSR1 ,
126 will dump the current internal state into
127 .Pa /var/run/rtsold.dump .
128 Also note that
130 will not be able to update the kernel routing tables unless
131 .Xr sysctl 8
132 reports that
133 net.inet6.ip6.accept_rtadv=1.
136 The options are as follows:
137 .Bl -tag -width indent
138 .It Fl 1
139 Perform only one probe.
140 Transmit Router Solicitation packets until at least one valid Router
141 Advertisement packet has arrived on each
142 .Ar interface ,
143 then exit.
144 .It Fl a
145 Autoprobe outgoing interface.
147 will try to find a non-loopback, non-point-to-point, IPv6-capable interface.
150 finds multiple interfaces,
152 will exit with error.
153 .It Fl D
154 Enable more debugging (than that offered by the
155 .Fl d
156 option) including the printing of internal timer information.
157 .It Fl d
158 Enable debugging.
159 .It Fl f
160 This option prevents
162 from becoming a daemon (foreground mode).
163 Warning messages are generated to standard error
164 instead of
165 .Xr syslog 3 .
166 .It Fl m
167 Enable mobility support.
168 If this option is specified,
170 sends probing packets to default routers that have advertised Router
171 Advertisements
172 when the node (re)attaches to an interface.
173 Moreover, if the option is specified,
175 periodically sends Router Solicitation on an interface that does not support
176 .Dv SIOCGIFMEDIA
177 ioctl.
180 .Sh EXIT STATUS
181 .Ex -std rtsold
183 .Sh FILES
184 .Bl -tag -width /var/run/rtsold.dumpXX -compact
185 .It Pa /var/run/rtsold.pid
186 The PID of the currently running
187 .Nm rtsold .
188 .It Pa /var/run/rtsold.dump
189 Internal state dump file.
192 .Sh SEE ALSO
193 .Xr rtadvd 8 ,
194 .Xr sysctl 8
196 .Sh HISTORY
199 command is based on the
200 .Nm rtsol
201 command, which first appeared in WIDE/KAME IPv6 protocol stack kit.
202 .Nm rtsol
203 is now integrated into
204 .Nm .
206 .Sh BUGS
207 In some operating systems, when a PCMCIA network card is removed
208 and reinserted, the corresponding interface index is changed.
209 However,
211 assumes such changes will not occur, and always uses the index that
212 it got at invocation. As a result,
214 may not work if you reinsert a network card.
215 In such a case,
217 should be killed and restarted.
219 You may see kernel error messages if you try to autoconfigure a host with
220 multiple interfaces.