be sure to link in the swrast_setup code, too
[netbsd-mini2440.git] / dist / tcpdump / atmuni31.h
blobc194883116e7c23bb63ae2f94ee0f1b7e9fbd346
1 /* $NetBSD$ */
3 /*
4 * Copyright (c) 1997 Yen Yen Lim and North Dakota State University
5 * All rights reserved.
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. All advertising materials mentioning features or use of this software
16 * must display the following acknowledgement:
17 * This product includes software developed by Yen Yen Lim and
18 North Dakota State University
19 * 4. The name of the author may not be used to endorse or promote products
20 * derived from this software without specific prior written permission.
22 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
23 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
24 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
25 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
26 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
27 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
28 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
30 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
31 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
32 * POSSIBILITY OF SUCH DAMAGE.
34 * @(#) Header: /tcpdump/master/tcpdump/atmuni31.h,v 1.2 2002/08/05 07:47:23 guy Exp (LBL)
37 /* Based on UNI3.1 standard by ATM Forum */
39 /* ATM traffic types based on VPI=0 and (the following VCI */
40 #define PPC 0x05 /* Point-to-point signal msg */
41 #define BCC 0x02 /* Broadcast signal msg */
42 #define OAMF4SC 0x03 /* Segment OAM F4 flow cell */
43 #define OAMF4EC 0x04 /* End-to-end OAM F4 flow cell */
44 #define METAC 0x01 /* Meta signal msg */
45 #define ILMIC 0x10 /* ILMI msg */
47 /* Q.2931 signalling messages */
48 #define CALL_PROCEED 0x02 /* call proceeding */
49 #define CONNECT 0x07 /* connect */
50 #define CONNECT_ACK 0x0f /* connect_ack */
51 #define SETUP 0x05 /* setup */
52 #define RELEASE 0x4d /* release */
53 #define RELEASE_DONE 0x5a /* release_done */
54 #define RESTART 0x46 /* restart */
55 #define RESTART_ACK 0x4e /* restart ack */
56 #define STATUS 0x7d /* status */
57 #define STATUS_ENQ 0x75 /* status ack */
58 #define ADD_PARTY 0x80 /* add party */
59 #define ADD_PARTY_ACK 0x81 /* add party ack */
60 #define ADD_PARTY_REJ 0x82 /* add party rej */
61 #define DROP_PARTY 0x83 /* drop party */
62 #define DROP_PARTY_ACK 0x84 /* drop party ack */
64 /* Information Element Parameters in the signalling messages */
65 #define CAUSE 0x08 /* cause */
66 #define ENDPT_REF 0x54 /* endpoint reference */
67 #define AAL_PARA 0x58 /* ATM adaptation layer parameters */
68 #define TRAFF_DESCRIP 0x59 /* atm traffic descriptors */
69 #define CONNECT_ID 0x5a /* connection identifier */
70 #define QOS_PARA 0x5c /* quality of service parameters */
71 #define B_HIGHER 0x5d /* broadband higher layer information */
72 #define B_BEARER 0x5e /* broadband bearer capability */
73 #define B_LOWER 0x5f /* broadband lower information */
74 #define CALLING_PARTY 0x6c /* calling party number */
75 #define CALLED_PARTY 0x70 /* called party nmber */
77 #define Q2931 0x09
79 /* Q.2931 signalling general messages format */
80 #define PROTO_POS 0 /* offset of protocol discriminator */
81 #define CALL_REF_POS 2 /* offset of call reference value */
82 #define MSG_TYPE_POS 5 /* offset of message type */
83 #define MSG_LEN_POS 7 /* offset of mesage length */
84 #define IE_BEGIN_POS 9 /* offset of first information element */
86 /* format of signalling messages */
87 #define TYPE_POS 0
88 #define LEN_POS 2
89 #define FIELD_BEGIN_POS 4