added 2.6.29.6 aldebaran kernel
[nao-ulib.git] / kernel / 2.6.29.6-aldebaran-rt / net / ipv4 / icmp.c
blobb84a5e39d80f23cd890d28711cce84b49d78c4c8
1 /*
2 * NET3: Implementation of the ICMP protocol layer.
4 * Alan Cox, <alan@lxorguk.ukuu.org.uk>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
11 * Some of the function names and the icmp unreach table for this
12 * module were derived from [icmp.c 1.0.11 06/02/93] by
13 * Ross Biro, Fred N. van Kempen, Mark Evans, Alan Cox, Gerhard Koerting.
14 * Other than that this module is a complete rewrite.
16 * Fixes:
17 * Clemens Fruhwirth : introduce global icmp rate limiting
18 * with icmp type masking ability instead
19 * of broken per type icmp timeouts.
20 * Mike Shaver : RFC1122 checks.
21 * Alan Cox : Multicast ping reply as self.
22 * Alan Cox : Fix atomicity lockup in ip_build_xmit
23 * call.
24 * Alan Cox : Added 216,128 byte paths to the MTU
25 * code.
26 * Martin Mares : RFC1812 checks.
27 * Martin Mares : Can be configured to follow redirects
28 * if acting as a router _without_ a
29 * routing protocol (RFC 1812).
30 * Martin Mares : Echo requests may be configured to
31 * be ignored (RFC 1812).
32 * Martin Mares : Limitation of ICMP error message
33 * transmit rate (RFC 1812).
34 * Martin Mares : TOS and Precedence set correctly
35 * (RFC 1812).
36 * Martin Mares : Now copying as much data from the
37 * original packet as we can without
38 * exceeding 576 bytes (RFC 1812).
39 * Willy Konynenberg : Transparent proxying support.
40 * Keith Owens : RFC1191 correction for 4.2BSD based
41 * path MTU bug.
42 * Thomas Quinot : ICMP Dest Unreach codes up to 15 are
43 * valid (RFC 1812).
44 * Andi Kleen : Check all packet lengths properly
45 * and moved all kfree_skb() up to
46 * icmp_rcv.
47 * Andi Kleen : Move the rate limit bookkeeping
48 * into the dest entry and use a token
49 * bucket filter (thanks to ANK). Make
50 * the rates sysctl configurable.
51 * Yu Tianli : Fixed two ugly bugs in icmp_send
52 * - IP option length was accounted wrongly
53 * - ICMP header length was not accounted
54 * at all.
55 * Tristan Greaves : Added sysctl option to ignore bogus
56 * broadcast responses from broken routers.
58 * To Fix:
60 * - Should use skb_pull() instead of all the manual checking.
61 * This would also greatly simply some upper layer error handlers. --AK
65 #include <linux/module.h>
66 #include <linux/types.h>
67 #include <linux/jiffies.h>
68 #include <linux/kernel.h>
69 #include <linux/fcntl.h>
70 #include <linux/socket.h>
71 #include <linux/in.h>
72 #include <linux/inet.h>
73 #include <linux/inetdevice.h>
74 #include <linux/netdevice.h>
75 #include <linux/string.h>
76 #include <linux/netfilter_ipv4.h>
77 #include <net/snmp.h>
78 #include <net/ip.h>
79 #include <net/route.h>
80 #include <net/protocol.h>
81 #include <net/icmp.h>
82 #include <net/tcp.h>
83 #include <net/udp.h>
84 #include <net/raw.h>
85 #include <linux/skbuff.h>
86 #include <net/sock.h>
87 #include <linux/errno.h>
88 #include <linux/timer.h>
89 #include <linux/init.h>
90 #include <asm/system.h>
91 #include <asm/uaccess.h>
92 #include <net/checksum.h>
93 #include <net/xfrm.h>
94 #include <net/inet_common.h>
97 * Build xmit assembly blocks
100 struct icmp_bxm {
101 struct sk_buff *skb;
102 int offset;
103 int data_len;
105 struct {
106 struct icmphdr icmph;
107 __be32 times[3];
108 } data;
109 int head_len;
110 struct ip_options replyopts;
111 unsigned char optbuf[40];
114 /* An array of errno for error messages from dest unreach. */
115 /* RFC 1122: 3.2.2.1 States that NET_UNREACH, HOST_UNREACH and SR_FAILED MUST be considered 'transient errs'. */
117 struct icmp_err icmp_err_convert[] = {
119 .errno = ENETUNREACH, /* ICMP_NET_UNREACH */
120 .fatal = 0,
123 .errno = EHOSTUNREACH, /* ICMP_HOST_UNREACH */
124 .fatal = 0,
127 .errno = ENOPROTOOPT /* ICMP_PROT_UNREACH */,
128 .fatal = 1,
131 .errno = ECONNREFUSED, /* ICMP_PORT_UNREACH */
132 .fatal = 1,
135 .errno = EMSGSIZE, /* ICMP_FRAG_NEEDED */
136 .fatal = 0,
139 .errno = EOPNOTSUPP, /* ICMP_SR_FAILED */
140 .fatal = 0,
143 .errno = ENETUNREACH, /* ICMP_NET_UNKNOWN */
144 .fatal = 1,
147 .errno = EHOSTDOWN, /* ICMP_HOST_UNKNOWN */
148 .fatal = 1,
151 .errno = ENONET, /* ICMP_HOST_ISOLATED */
152 .fatal = 1,
155 .errno = ENETUNREACH, /* ICMP_NET_ANO */
156 .fatal = 1,
159 .errno = EHOSTUNREACH, /* ICMP_HOST_ANO */
160 .fatal = 1,
163 .errno = ENETUNREACH, /* ICMP_NET_UNR_TOS */
164 .fatal = 0,
167 .errno = EHOSTUNREACH, /* ICMP_HOST_UNR_TOS */
168 .fatal = 0,
171 .errno = EHOSTUNREACH, /* ICMP_PKT_FILTERED */
172 .fatal = 1,
175 .errno = EHOSTUNREACH, /* ICMP_PREC_VIOLATION */
176 .fatal = 1,
179 .errno = EHOSTUNREACH, /* ICMP_PREC_CUTOFF */
180 .fatal = 1,
185 * ICMP control array. This specifies what to do with each ICMP.
188 struct icmp_control {
189 void (*handler)(struct sk_buff *skb);
190 short error; /* This ICMP is classed as an error message */
193 static const struct icmp_control icmp_pointers[NR_ICMP_TYPES+1];
196 * The ICMP socket(s). This is the most convenient way to flow control
197 * our ICMP output as well as maintain a clean interface throughout
198 * all layers. All Socketless IP sends will soon be gone.
200 * On SMP we have one ICMP socket per-cpu.
202 static struct sock *icmp_sk(struct net *net)
205 * Should be safe on PREEMPT_SOFTIRQS/HARDIRQS to use raw-smp-processor-id:
207 return net->ipv4.icmp_sk[raw_smp_processor_id()];
210 static inline struct sock *icmp_xmit_lock(struct net *net)
212 struct sock *sk;
214 local_bh_disable();
216 sk = icmp_sk(net);
218 if (unlikely(!spin_trylock(&sk->sk_lock.slock))) {
219 /* This can happen if the output path signals a
220 * dst_link_failure() for an outgoing ICMP packet.
222 local_bh_enable();
223 return NULL;
225 return sk;
228 static inline void icmp_xmit_unlock(struct sock *sk)
230 spin_unlock_bh(&sk->sk_lock.slock);
234 * Send an ICMP frame.
238 * Check transmit rate limitation for given message.
239 * The rate information is held in the destination cache now.
240 * This function is generic and could be used for other purposes
241 * too. It uses a Token bucket filter as suggested by Alexey Kuznetsov.
243 * Note that the same dst_entry fields are modified by functions in
244 * route.c too, but these work for packet destinations while xrlim_allow
245 * works for icmp destinations. This means the rate limiting information
246 * for one "ip object" is shared - and these ICMPs are twice limited:
247 * by source and by destination.
249 * RFC 1812: 4.3.2.8 SHOULD be able to limit error message rate
250 * SHOULD allow setting of rate limits
252 * Shared between ICMPv4 and ICMPv6.
254 #define XRLIM_BURST_FACTOR 6
255 int xrlim_allow(struct dst_entry *dst, int timeout)
257 unsigned long now, token = dst->rate_tokens;
258 int rc = 0;
260 now = jiffies;
261 token += now - dst->rate_last;
262 dst->rate_last = now;
263 if (token > XRLIM_BURST_FACTOR * timeout)
264 token = XRLIM_BURST_FACTOR * timeout;
265 if (token >= timeout) {
266 token -= timeout;
267 rc = 1;
269 dst->rate_tokens = token;
270 return rc;
273 static inline int icmpv4_xrlim_allow(struct net *net, struct rtable *rt,
274 int type, int code)
276 struct dst_entry *dst = &rt->u.dst;
277 int rc = 1;
279 if (type > NR_ICMP_TYPES)
280 goto out;
282 /* Don't limit PMTU discovery. */
283 if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED)
284 goto out;
286 /* No rate limit on loopback */
287 if (dst->dev && (dst->dev->flags&IFF_LOOPBACK))
288 goto out;
290 /* Limit if icmp type is enabled in ratemask. */
291 if ((1 << type) & net->ipv4.sysctl_icmp_ratemask)
292 rc = xrlim_allow(dst, net->ipv4.sysctl_icmp_ratelimit);
293 out:
294 return rc;
298 * Maintain the counters used in the SNMP statistics for outgoing ICMP
300 void icmp_out_count(struct net *net, unsigned char type)
302 ICMPMSGOUT_INC_STATS(net, type);
303 ICMP_INC_STATS(net, ICMP_MIB_OUTMSGS);
307 * Checksum each fragment, and on the first include the headers and final
308 * checksum.
310 static int icmp_glue_bits(void *from, char *to, int offset, int len, int odd,
311 struct sk_buff *skb)
313 struct icmp_bxm *icmp_param = (struct icmp_bxm *)from;
314 __wsum csum;
316 csum = skb_copy_and_csum_bits(icmp_param->skb,
317 icmp_param->offset + offset,
318 to, len, 0);
320 skb->csum = csum_block_add(skb->csum, csum, odd);
321 if (icmp_pointers[icmp_param->data.icmph.type].error)
322 nf_ct_attach(skb, icmp_param->skb);
323 return 0;
326 static void icmp_push_reply(struct icmp_bxm *icmp_param,
327 struct ipcm_cookie *ipc, struct rtable **rt)
329 struct sock *sk;
330 struct sk_buff *skb;
332 sk = icmp_sk(dev_net((*rt)->u.dst.dev));
333 if (ip_append_data(sk, icmp_glue_bits, icmp_param,
334 icmp_param->data_len+icmp_param->head_len,
335 icmp_param->head_len,
336 ipc, rt, MSG_DONTWAIT) < 0)
337 ip_flush_pending_frames(sk);
338 else if ((skb = skb_peek(&sk->sk_write_queue)) != NULL) {
339 struct icmphdr *icmph = icmp_hdr(skb);
340 __wsum csum = 0;
341 struct sk_buff *skb1;
343 skb_queue_walk(&sk->sk_write_queue, skb1) {
344 csum = csum_add(csum, skb1->csum);
346 csum = csum_partial_copy_nocheck((void *)&icmp_param->data,
347 (char *)icmph,
348 icmp_param->head_len, csum);
349 icmph->checksum = csum_fold(csum);
350 skb->ip_summed = CHECKSUM_NONE;
351 ip_push_pending_frames(sk);
356 * Driving logic for building and sending ICMP messages.
359 static void icmp_reply(struct icmp_bxm *icmp_param, struct sk_buff *skb)
361 struct ipcm_cookie ipc;
362 struct rtable *rt = skb->rtable;
363 struct net *net = dev_net(rt->u.dst.dev);
364 struct sock *sk;
365 struct inet_sock *inet;
366 __be32 daddr;
368 if (ip_options_echo(&icmp_param->replyopts, skb))
369 return;
371 sk = icmp_xmit_lock(net);
372 if (sk == NULL)
373 return;
374 inet = inet_sk(sk);
376 icmp_param->data.icmph.checksum = 0;
378 inet->tos = ip_hdr(skb)->tos;
379 daddr = ipc.addr = rt->rt_src;
380 ipc.opt = NULL;
381 if (icmp_param->replyopts.optlen) {
382 ipc.opt = &icmp_param->replyopts;
383 if (ipc.opt->srr)
384 daddr = icmp_param->replyopts.faddr;
387 struct flowi fl = { .nl_u = { .ip4_u =
388 { .daddr = daddr,
389 .saddr = rt->rt_spec_dst,
390 .tos = RT_TOS(ip_hdr(skb)->tos) } },
391 .proto = IPPROTO_ICMP };
392 security_skb_classify_flow(skb, &fl);
393 if (ip_route_output_key(net, &rt, &fl))
394 goto out_unlock;
396 if (icmpv4_xrlim_allow(net, rt, icmp_param->data.icmph.type,
397 icmp_param->data.icmph.code))
398 icmp_push_reply(icmp_param, &ipc, &rt);
399 ip_rt_put(rt);
400 out_unlock:
401 icmp_xmit_unlock(sk);
406 * Send an ICMP message in response to a situation
408 * RFC 1122: 3.2.2 MUST send at least the IP header and 8 bytes of header.
409 * MAY send more (we do).
410 * MUST NOT change this header information.
411 * MUST NOT reply to a multicast/broadcast IP address.
412 * MUST NOT reply to a multicast/broadcast MAC address.
413 * MUST reply to only the first fragment.
416 void icmp_send(struct sk_buff *skb_in, int type, int code, __be32 info)
418 struct iphdr *iph;
419 int room;
420 struct icmp_bxm icmp_param;
421 struct rtable *rt = skb_in->rtable;
422 struct ipcm_cookie ipc;
423 __be32 saddr;
424 u8 tos;
425 struct net *net;
426 struct sock *sk;
428 if (!rt)
429 goto out;
430 net = dev_net(rt->u.dst.dev);
433 * Find the original header. It is expected to be valid, of course.
434 * Check this, icmp_send is called from the most obscure devices
435 * sometimes.
437 iph = ip_hdr(skb_in);
439 if ((u8 *)iph < skb_in->head ||
440 (skb_in->network_header + sizeof(*iph)) > skb_in->tail)
441 goto out;
444 * No replies to physical multicast/broadcast
446 if (skb_in->pkt_type != PACKET_HOST)
447 goto out;
450 * Now check at the protocol level
452 if (rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
453 goto out;
456 * Only reply to fragment 0. We byte re-order the constant
457 * mask for efficiency.
459 if (iph->frag_off & htons(IP_OFFSET))
460 goto out;
463 * If we send an ICMP error to an ICMP error a mess would result..
465 if (icmp_pointers[type].error) {
467 * We are an error, check if we are replying to an
468 * ICMP error
470 if (iph->protocol == IPPROTO_ICMP) {
471 u8 _inner_type, *itp;
473 itp = skb_header_pointer(skb_in,
474 skb_network_header(skb_in) +
475 (iph->ihl << 2) +
476 offsetof(struct icmphdr,
477 type) -
478 skb_in->data,
479 sizeof(_inner_type),
480 &_inner_type);
481 if (itp == NULL)
482 goto out;
485 * Assume any unknown ICMP type is an error. This
486 * isn't specified by the RFC, but think about it..
488 if (*itp > NR_ICMP_TYPES ||
489 icmp_pointers[*itp].error)
490 goto out;
494 sk = icmp_xmit_lock(net);
495 if (sk == NULL)
496 return;
499 * Construct source address and options.
502 saddr = iph->daddr;
503 if (!(rt->rt_flags & RTCF_LOCAL)) {
504 struct net_device *dev = NULL;
506 if (rt->fl.iif &&
507 net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr)
508 dev = dev_get_by_index(net, rt->fl.iif);
510 if (dev) {
511 saddr = inet_select_addr(dev, 0, RT_SCOPE_LINK);
512 dev_put(dev);
513 } else
514 saddr = 0;
517 tos = icmp_pointers[type].error ? ((iph->tos & IPTOS_TOS_MASK) |
518 IPTOS_PREC_INTERNETCONTROL) :
519 iph->tos;
521 if (ip_options_echo(&icmp_param.replyopts, skb_in))
522 goto out_unlock;
526 * Prepare data for ICMP header.
529 icmp_param.data.icmph.type = type;
530 icmp_param.data.icmph.code = code;
531 icmp_param.data.icmph.un.gateway = info;
532 icmp_param.data.icmph.checksum = 0;
533 icmp_param.skb = skb_in;
534 icmp_param.offset = skb_network_offset(skb_in);
535 inet_sk(sk)->tos = tos;
536 ipc.addr = iph->saddr;
537 ipc.opt = &icmp_param.replyopts;
540 struct flowi fl = {
541 .nl_u = {
542 .ip4_u = {
543 .daddr = icmp_param.replyopts.srr ?
544 icmp_param.replyopts.faddr :
545 iph->saddr,
546 .saddr = saddr,
547 .tos = RT_TOS(tos)
550 .proto = IPPROTO_ICMP,
551 .uli_u = {
552 .icmpt = {
553 .type = type,
554 .code = code
558 int err;
559 struct rtable *rt2;
561 security_skb_classify_flow(skb_in, &fl);
562 if (__ip_route_output_key(net, &rt, &fl))
563 goto out_unlock;
565 /* No need to clone since we're just using its address. */
566 rt2 = rt;
568 err = xfrm_lookup(net, (struct dst_entry **)&rt, &fl, NULL, 0);
569 switch (err) {
570 case 0:
571 if (rt != rt2)
572 goto route_done;
573 break;
574 case -EPERM:
575 rt = NULL;
576 break;
577 default:
578 goto out_unlock;
581 if (xfrm_decode_session_reverse(skb_in, &fl, AF_INET))
582 goto relookup_failed;
584 if (inet_addr_type(net, fl.fl4_src) == RTN_LOCAL)
585 err = __ip_route_output_key(net, &rt2, &fl);
586 else {
587 struct flowi fl2 = {};
588 struct dst_entry *odst;
590 fl2.fl4_dst = fl.fl4_src;
591 if (ip_route_output_key(net, &rt2, &fl2))
592 goto relookup_failed;
594 /* Ugh! */
595 odst = skb_in->dst;
596 err = ip_route_input(skb_in, fl.fl4_dst, fl.fl4_src,
597 RT_TOS(tos), rt2->u.dst.dev);
599 dst_release(&rt2->u.dst);
600 rt2 = skb_in->rtable;
601 skb_in->dst = odst;
604 if (err)
605 goto relookup_failed;
607 err = xfrm_lookup(net, (struct dst_entry **)&rt2, &fl, NULL,
608 XFRM_LOOKUP_ICMP);
609 switch (err) {
610 case 0:
611 dst_release(&rt->u.dst);
612 rt = rt2;
613 break;
614 case -EPERM:
615 goto ende;
616 default:
617 relookup_failed:
618 if (!rt)
619 goto out_unlock;
620 break;
624 route_done:
625 if (!icmpv4_xrlim_allow(net, rt, type, code))
626 goto ende;
628 /* RFC says return as much as we can without exceeding 576 bytes. */
630 room = dst_mtu(&rt->u.dst);
631 if (room > 576)
632 room = 576;
633 room -= sizeof(struct iphdr) + icmp_param.replyopts.optlen;
634 room -= sizeof(struct icmphdr);
636 icmp_param.data_len = skb_in->len - icmp_param.offset;
637 if (icmp_param.data_len > room)
638 icmp_param.data_len = room;
639 icmp_param.head_len = sizeof(struct icmphdr);
641 icmp_push_reply(&icmp_param, &ipc, &rt);
642 ende:
643 ip_rt_put(rt);
644 out_unlock:
645 icmp_xmit_unlock(sk);
646 out:;
651 * Handle ICMP_DEST_UNREACH, ICMP_TIME_EXCEED, and ICMP_QUENCH.
654 static void icmp_unreach(struct sk_buff *skb)
656 struct iphdr *iph;
657 struct icmphdr *icmph;
658 int hash, protocol;
659 struct net_protocol *ipprot;
660 u32 info = 0;
661 struct net *net;
663 net = dev_net(skb->dst->dev);
666 * Incomplete header ?
667 * Only checks for the IP header, there should be an
668 * additional check for longer headers in upper levels.
671 if (!pskb_may_pull(skb, sizeof(struct iphdr)))
672 goto out_err;
674 icmph = icmp_hdr(skb);
675 iph = (struct iphdr *)skb->data;
677 if (iph->ihl < 5) /* Mangled header, drop. */
678 goto out_err;
680 if (icmph->type == ICMP_DEST_UNREACH) {
681 switch (icmph->code & 15) {
682 case ICMP_NET_UNREACH:
683 case ICMP_HOST_UNREACH:
684 case ICMP_PROT_UNREACH:
685 case ICMP_PORT_UNREACH:
686 break;
687 case ICMP_FRAG_NEEDED:
688 if (ipv4_config.no_pmtu_disc) {
689 LIMIT_NETDEBUG(KERN_INFO "ICMP: %pI4: fragmentation needed and DF set.\n",
690 &iph->daddr);
691 } else {
692 info = ip_rt_frag_needed(net, iph,
693 ntohs(icmph->un.frag.mtu),
694 skb->dev);
695 if (!info)
696 goto out;
698 break;
699 case ICMP_SR_FAILED:
700 LIMIT_NETDEBUG(KERN_INFO "ICMP: %pI4: Source Route Failed.\n",
701 &iph->daddr);
702 break;
703 default:
704 break;
706 if (icmph->code > NR_ICMP_UNREACH)
707 goto out;
708 } else if (icmph->type == ICMP_PARAMETERPROB)
709 info = ntohl(icmph->un.gateway) >> 24;
712 * Throw it at our lower layers
714 * RFC 1122: 3.2.2 MUST extract the protocol ID from the passed
715 * header.
716 * RFC 1122: 3.2.2.1 MUST pass ICMP unreach messages to the
717 * transport layer.
718 * RFC 1122: 3.2.2.2 MUST pass ICMP time expired messages to
719 * transport layer.
723 * Check the other end isnt violating RFC 1122. Some routers send
724 * bogus responses to broadcast frames. If you see this message
725 * first check your netmask matches at both ends, if it does then
726 * get the other vendor to fix their kit.
729 if (!net->ipv4.sysctl_icmp_ignore_bogus_error_responses &&
730 inet_addr_type(net, iph->daddr) == RTN_BROADCAST) {
731 if (net_ratelimit())
732 printk(KERN_WARNING "%pI4 sent an invalid ICMP "
733 "type %u, code %u "
734 "error to a broadcast: %pI4 on %s\n",
735 &ip_hdr(skb)->saddr,
736 icmph->type, icmph->code,
737 &iph->daddr,
738 skb->dev->name);
739 goto out;
742 /* Checkin full IP header plus 8 bytes of protocol to
743 * avoid additional coding at protocol handlers.
745 if (!pskb_may_pull(skb, iph->ihl * 4 + 8))
746 goto out;
748 iph = (struct iphdr *)skb->data;
749 protocol = iph->protocol;
752 * Deliver ICMP message to raw sockets. Pretty useless feature?
754 raw_icmp_error(skb, protocol, info);
756 hash = protocol & (MAX_INET_PROTOS - 1);
757 rcu_read_lock();
758 ipprot = rcu_dereference(inet_protos[hash]);
759 if (ipprot && ipprot->err_handler)
760 ipprot->err_handler(skb, info);
761 rcu_read_unlock();
763 out:
764 return;
765 out_err:
766 ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
767 goto out;
772 * Handle ICMP_REDIRECT.
775 static void icmp_redirect(struct sk_buff *skb)
777 struct iphdr *iph;
779 if (skb->len < sizeof(struct iphdr))
780 goto out_err;
783 * Get the copied header of the packet that caused the redirect
785 if (!pskb_may_pull(skb, sizeof(struct iphdr)))
786 goto out;
788 iph = (struct iphdr *)skb->data;
790 switch (icmp_hdr(skb)->code & 7) {
791 case ICMP_REDIR_NET:
792 case ICMP_REDIR_NETTOS:
794 * As per RFC recommendations now handle it as a host redirect.
796 case ICMP_REDIR_HOST:
797 case ICMP_REDIR_HOSTTOS:
798 ip_rt_redirect(ip_hdr(skb)->saddr, iph->daddr,
799 icmp_hdr(skb)->un.gateway,
800 iph->saddr, skb->dev);
801 break;
803 out:
804 return;
805 out_err:
806 ICMP_INC_STATS_BH(dev_net(skb->dev), ICMP_MIB_INERRORS);
807 goto out;
811 * Handle ICMP_ECHO ("ping") requests.
813 * RFC 1122: 3.2.2.6 MUST have an echo server that answers ICMP echo
814 * requests.
815 * RFC 1122: 3.2.2.6 Data received in the ICMP_ECHO request MUST be
816 * included in the reply.
817 * RFC 1812: 4.3.3.6 SHOULD have a config option for silently ignoring
818 * echo requests, MUST have default=NOT.
819 * See also WRT handling of options once they are done and working.
822 static void icmp_echo(struct sk_buff *skb)
824 struct net *net;
826 net = dev_net(skb->dst->dev);
827 if (!net->ipv4.sysctl_icmp_echo_ignore_all) {
828 struct icmp_bxm icmp_param;
830 icmp_param.data.icmph = *icmp_hdr(skb);
831 icmp_param.data.icmph.type = ICMP_ECHOREPLY;
832 icmp_param.skb = skb;
833 icmp_param.offset = 0;
834 icmp_param.data_len = skb->len;
835 icmp_param.head_len = sizeof(struct icmphdr);
836 icmp_reply(&icmp_param, skb);
841 * Handle ICMP Timestamp requests.
842 * RFC 1122: 3.2.2.8 MAY implement ICMP timestamp requests.
843 * SHOULD be in the kernel for minimum random latency.
844 * MUST be accurate to a few minutes.
845 * MUST be updated at least at 15Hz.
847 static void icmp_timestamp(struct sk_buff *skb)
849 struct timespec tv;
850 struct icmp_bxm icmp_param;
852 * Too short.
854 if (skb->len < 4)
855 goto out_err;
858 * Fill in the current time as ms since midnight UT:
860 getnstimeofday(&tv);
861 icmp_param.data.times[1] = htonl((tv.tv_sec % 86400) * MSEC_PER_SEC +
862 tv.tv_nsec / NSEC_PER_MSEC);
863 icmp_param.data.times[2] = icmp_param.data.times[1];
864 if (skb_copy_bits(skb, 0, &icmp_param.data.times[0], 4))
865 BUG();
866 icmp_param.data.icmph = *icmp_hdr(skb);
867 icmp_param.data.icmph.type = ICMP_TIMESTAMPREPLY;
868 icmp_param.data.icmph.code = 0;
869 icmp_param.skb = skb;
870 icmp_param.offset = 0;
871 icmp_param.data_len = 0;
872 icmp_param.head_len = sizeof(struct icmphdr) + 12;
873 icmp_reply(&icmp_param, skb);
874 out:
875 return;
876 out_err:
877 ICMP_INC_STATS_BH(dev_net(skb->dst->dev), ICMP_MIB_INERRORS);
878 goto out;
883 * Handle ICMP_ADDRESS_MASK requests. (RFC950)
885 * RFC1122 (3.2.2.9). A host MUST only send replies to
886 * ADDRESS_MASK requests if it's been configured as an address mask
887 * agent. Receiving a request doesn't constitute implicit permission to
888 * act as one. Of course, implementing this correctly requires (SHOULD)
889 * a way to turn the functionality on and off. Another one for sysctl(),
890 * I guess. -- MS
892 * RFC1812 (4.3.3.9). A router MUST implement it.
893 * A router SHOULD have switch turning it on/off.
894 * This switch MUST be ON by default.
896 * Gratuitous replies, zero-source replies are not implemented,
897 * that complies with RFC. DO NOT implement them!!! All the idea
898 * of broadcast addrmask replies as specified in RFC950 is broken.
899 * The problem is that it is not uncommon to have several prefixes
900 * on one physical interface. Moreover, addrmask agent can even be
901 * not aware of existing another prefixes.
902 * If source is zero, addrmask agent cannot choose correct prefix.
903 * Gratuitous mask announcements suffer from the same problem.
904 * RFC1812 explains it, but still allows to use ADDRMASK,
905 * that is pretty silly. --ANK
907 * All these rules are so bizarre, that I removed kernel addrmask
908 * support at all. It is wrong, it is obsolete, nobody uses it in
909 * any case. --ANK
911 * Furthermore you can do it with a usermode address agent program
912 * anyway...
915 static void icmp_address(struct sk_buff *skb)
917 #if 0
918 if (net_ratelimit())
919 printk(KERN_DEBUG "a guy asks for address mask. Who is it?\n");
920 #endif
924 * RFC1812 (4.3.3.9). A router SHOULD listen all replies, and complain
925 * loudly if an inconsistency is found.
928 static void icmp_address_reply(struct sk_buff *skb)
930 struct rtable *rt = skb->rtable;
931 struct net_device *dev = skb->dev;
932 struct in_device *in_dev;
933 struct in_ifaddr *ifa;
935 if (skb->len < 4 || !(rt->rt_flags&RTCF_DIRECTSRC))
936 goto out;
938 in_dev = in_dev_get(dev);
939 if (!in_dev)
940 goto out;
941 rcu_read_lock();
942 if (in_dev->ifa_list &&
943 IN_DEV_LOG_MARTIANS(in_dev) &&
944 IN_DEV_FORWARD(in_dev)) {
945 __be32 _mask, *mp;
947 mp = skb_header_pointer(skb, 0, sizeof(_mask), &_mask);
948 BUG_ON(mp == NULL);
949 for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
950 if (*mp == ifa->ifa_mask &&
951 inet_ifa_match(rt->rt_src, ifa))
952 break;
954 if (!ifa && net_ratelimit()) {
955 printk(KERN_INFO "Wrong address mask %pI4 from %s/%pI4\n",
956 mp, dev->name, &rt->rt_src);
959 rcu_read_unlock();
960 in_dev_put(in_dev);
961 out:;
964 static void icmp_discard(struct sk_buff *skb)
969 * Deal with incoming ICMP packets.
971 int icmp_rcv(struct sk_buff *skb)
973 struct icmphdr *icmph;
974 struct rtable *rt = skb->rtable;
975 struct net *net = dev_net(rt->u.dst.dev);
977 if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
978 struct sec_path *sp = skb_sec_path(skb);
979 int nh;
981 if (!(sp && sp->xvec[sp->len - 1]->props.flags &
982 XFRM_STATE_ICMP))
983 goto drop;
985 if (!pskb_may_pull(skb, sizeof(*icmph) + sizeof(struct iphdr)))
986 goto drop;
988 nh = skb_network_offset(skb);
989 skb_set_network_header(skb, sizeof(*icmph));
991 if (!xfrm4_policy_check_reverse(NULL, XFRM_POLICY_IN, skb))
992 goto drop;
994 skb_set_network_header(skb, nh);
997 ICMP_INC_STATS_BH(net, ICMP_MIB_INMSGS);
999 switch (skb->ip_summed) {
1000 case CHECKSUM_COMPLETE:
1001 if (!csum_fold(skb->csum))
1002 break;
1003 /* fall through */
1004 case CHECKSUM_NONE:
1005 skb->csum = 0;
1006 if (__skb_checksum_complete(skb))
1007 goto error;
1010 if (!pskb_pull(skb, sizeof(*icmph)))
1011 goto error;
1013 icmph = icmp_hdr(skb);
1015 ICMPMSGIN_INC_STATS_BH(net, icmph->type);
1017 * 18 is the highest 'known' ICMP type. Anything else is a mystery
1019 * RFC 1122: 3.2.2 Unknown ICMP messages types MUST be silently
1020 * discarded.
1022 if (icmph->type > NR_ICMP_TYPES)
1023 goto error;
1027 * Parse the ICMP message
1030 if (rt->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST)) {
1032 * RFC 1122: 3.2.2.6 An ICMP_ECHO to broadcast MAY be
1033 * silently ignored (we let user decide with a sysctl).
1034 * RFC 1122: 3.2.2.8 An ICMP_TIMESTAMP MAY be silently
1035 * discarded if to broadcast/multicast.
1037 if ((icmph->type == ICMP_ECHO ||
1038 icmph->type == ICMP_TIMESTAMP) &&
1039 net->ipv4.sysctl_icmp_echo_ignore_broadcasts) {
1040 goto error;
1042 if (icmph->type != ICMP_ECHO &&
1043 icmph->type != ICMP_TIMESTAMP &&
1044 icmph->type != ICMP_ADDRESS &&
1045 icmph->type != ICMP_ADDRESSREPLY) {
1046 goto error;
1050 icmp_pointers[icmph->type].handler(skb);
1052 drop:
1053 kfree_skb(skb);
1054 return 0;
1055 error:
1056 ICMP_INC_STATS_BH(net, ICMP_MIB_INERRORS);
1057 goto drop;
1061 * This table is the definition of how we handle ICMP.
1063 static const struct icmp_control icmp_pointers[NR_ICMP_TYPES + 1] = {
1064 [ICMP_ECHOREPLY] = {
1065 .handler = icmp_discard,
1067 [1] = {
1068 .handler = icmp_discard,
1069 .error = 1,
1071 [2] = {
1072 .handler = icmp_discard,
1073 .error = 1,
1075 [ICMP_DEST_UNREACH] = {
1076 .handler = icmp_unreach,
1077 .error = 1,
1079 [ICMP_SOURCE_QUENCH] = {
1080 .handler = icmp_unreach,
1081 .error = 1,
1083 [ICMP_REDIRECT] = {
1084 .handler = icmp_redirect,
1085 .error = 1,
1087 [6] = {
1088 .handler = icmp_discard,
1089 .error = 1,
1091 [7] = {
1092 .handler = icmp_discard,
1093 .error = 1,
1095 [ICMP_ECHO] = {
1096 .handler = icmp_echo,
1098 [9] = {
1099 .handler = icmp_discard,
1100 .error = 1,
1102 [10] = {
1103 .handler = icmp_discard,
1104 .error = 1,
1106 [ICMP_TIME_EXCEEDED] = {
1107 .handler = icmp_unreach,
1108 .error = 1,
1110 [ICMP_PARAMETERPROB] = {
1111 .handler = icmp_unreach,
1112 .error = 1,
1114 [ICMP_TIMESTAMP] = {
1115 .handler = icmp_timestamp,
1117 [ICMP_TIMESTAMPREPLY] = {
1118 .handler = icmp_discard,
1120 [ICMP_INFO_REQUEST] = {
1121 .handler = icmp_discard,
1123 [ICMP_INFO_REPLY] = {
1124 .handler = icmp_discard,
1126 [ICMP_ADDRESS] = {
1127 .handler = icmp_address,
1129 [ICMP_ADDRESSREPLY] = {
1130 .handler = icmp_address_reply,
1134 static void __net_exit icmp_sk_exit(struct net *net)
1136 int i;
1138 for_each_possible_cpu(i)
1139 inet_ctl_sock_destroy(net->ipv4.icmp_sk[i]);
1140 kfree(net->ipv4.icmp_sk);
1141 net->ipv4.icmp_sk = NULL;
1144 static int __net_init icmp_sk_init(struct net *net)
1146 int i, err;
1148 net->ipv4.icmp_sk =
1149 kzalloc(nr_cpu_ids * sizeof(struct sock *), GFP_KERNEL);
1150 if (net->ipv4.icmp_sk == NULL)
1151 return -ENOMEM;
1153 for_each_possible_cpu(i) {
1154 struct sock *sk;
1156 err = inet_ctl_sock_create(&sk, PF_INET,
1157 SOCK_RAW, IPPROTO_ICMP, net);
1158 if (err < 0)
1159 goto fail;
1161 net->ipv4.icmp_sk[i] = sk;
1163 /* Enough space for 2 64K ICMP packets, including
1164 * sk_buff struct overhead.
1166 sk->sk_sndbuf =
1167 (2 * ((64 * 1024) + sizeof(struct sk_buff)));
1169 inet_sk(sk)->pmtudisc = IP_PMTUDISC_DONT;
1172 /* Control parameters for ECHO replies. */
1173 net->ipv4.sysctl_icmp_echo_ignore_all = 0;
1174 net->ipv4.sysctl_icmp_echo_ignore_broadcasts = 1;
1176 /* Control parameter - ignore bogus broadcast responses? */
1177 net->ipv4.sysctl_icmp_ignore_bogus_error_responses = 1;
1180 * Configurable global rate limit.
1182 * ratelimit defines tokens/packet consumed for dst->rate_token
1183 * bucket ratemask defines which icmp types are ratelimited by
1184 * setting it's bit position.
1186 * default:
1187 * dest unreachable (3), source quench (4),
1188 * time exceeded (11), parameter problem (12)
1191 net->ipv4.sysctl_icmp_ratelimit = 1 * HZ;
1192 net->ipv4.sysctl_icmp_ratemask = 0x1818;
1193 net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr = 0;
1195 return 0;
1197 fail:
1198 for_each_possible_cpu(i)
1199 inet_ctl_sock_destroy(net->ipv4.icmp_sk[i]);
1200 kfree(net->ipv4.icmp_sk);
1201 return err;
1204 static struct pernet_operations __net_initdata icmp_sk_ops = {
1205 .init = icmp_sk_init,
1206 .exit = icmp_sk_exit,
1209 int __init icmp_init(void)
1211 return register_pernet_subsys(&icmp_sk_ops);
1214 EXPORT_SYMBOL(icmp_err_convert);
1215 EXPORT_SYMBOL(icmp_send);
1216 EXPORT_SYMBOL(xrlim_allow);