/src/curl/release.sh: make sure to cd to the correct directory first

[msysgit/mtrensch.git] / mingw / info / gdb.info-4

This is gdb.info, produced by makeinfo version 4.8 from
../.././gdb/doc/gdb.texinfo.

INFO-DIR-SECTION Software development
START-INFO-DIR-ENTRY
* Gdb: (gdb).                     The GNU debugger.
END-INFO-DIR-ENTRY

   This file documents the GNU debugger GDB.

   This is the Ninth Edition, of `Debugging with GDB: the GNU
Source-Level Debugger' for GDB Version 6.8.

   Copyright (C) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996,
1998,
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Free Software Foundation, Inc.

   Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.1 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Free Software" and "Free Software Needs Free
Documentation", with the Front-Cover Texts being "A GNU Manual," and
with the Back-Cover Texts as in (a) below.

   (a) The FSF's Back-Cover Text is: "You are free to copy and modify
this GNU Manual.  Buying copies from GNU Press supports the FSF in
developing GNU and promoting software freedom."

\x1f
File: gdb.info,  Node: Bytecode Descriptions,  Next: Using Agent Expressions,  Prev: General Bytecode Design,  Up: Agent Expressions

E.2 Bytecode Descriptions
=========================

Each bytecode description has the following form:

`add' (0x02): A B => A+B
     Pop the top two stack items, A and B, as integers; push their sum,
     as an integer.


   In this example, `add' is the name of the bytecode, and `(0x02)' is
the one-byte value used to encode the bytecode, in hexadecimal.  The
phrase "A B => A+B" shows the stack before and after the bytecode
executes.  Beforehand, the stack must contain at least two values, A
and B; since the top of the stack is to the right, B is on the top of
the stack, and A is underneath it.  After execution, the bytecode will
have popped A and B from the stack, and replaced them with a single
value, A+B.  There may be other values on the stack below those shown,
but the bytecode affects only those shown.

   Here is another example:

`const8' (0x22) N: => N
     Push the 8-bit integer constant N on the stack, without sign
     extension.


   In this example, the bytecode `const8' takes an operand N directly
from the bytecode stream; the operand follows the `const8' bytecode
itself.  We write any such operands immediately after the name of the
bytecode, before the colon, and describe the exact encoding of the
operand in the bytecode stream in the body of the bytecode description.

   For the `const8' bytecode, there are no stack items given before the
=>; this simply means that the bytecode consumes no values from the
stack.  If a bytecode consumes no values, or produces no values, the
list on either side of the => may be empty.

   If a value is written as A, B, or N, then the bytecode treats it as
an integer.  If a value is written is ADDR, then the bytecode treats it
as an address.

   We do not fully describe the floating point operations here; although
this design can be extended in a clean way to handle floating point
values, they are not of immediate interest to the customer, so we avoid
describing them, to save time.

`float' (0x01): =>
     Prefix for floating-point bytecodes.  Not implemented yet.

`add' (0x02): A B => A+B
     Pop two integers from the stack, and push their sum, as an integer.

`sub' (0x03): A B => A-B
     Pop two integers from the stack, subtract the top value from the
     next-to-top value, and push the difference.

`mul' (0x04): A B => A*B
     Pop two integers from the stack, multiply them, and push the
     product on the stack.  Note that, when one multiplies two N-bit
     numbers yielding another N-bit number, it is irrelevant whether the
     numbers are signed or not; the results are the same.

`div_signed' (0x05): A B => A/B
     Pop two signed integers from the stack; divide the next-to-top
     value by the top value, and push the quotient.  If the divisor is
     zero, terminate with an error.

`div_unsigned' (0x06): A B => A/B
     Pop two unsigned integers from the stack; divide the next-to-top
     value by the top value, and push the quotient.  If the divisor is
     zero, terminate with an error.

`rem_signed' (0x07): A B => A MODULO B
     Pop two signed integers from the stack; divide the next-to-top
     value by the top value, and push the remainder.  If the divisor is
     zero, terminate with an error.

`rem_unsigned' (0x08): A B => A MODULO B
     Pop two unsigned integers from the stack; divide the next-to-top
     value by the top value, and push the remainder.  If the divisor is
     zero, terminate with an error.

`lsh' (0x09): A B => A<<B
     Pop two integers from the stack; let A be the next-to-top value,
     and B be the top value.  Shift A left by B bits, and push the
     result.

`rsh_signed' (0x0a): A B => `(signed)'A>>B
     Pop two integers from the stack; let A be the next-to-top value,
     and B be the top value.  Shift A right by B bits, inserting copies
     of the top bit at the high end, and push the result.

`rsh_unsigned' (0x0b): A B => A>>B
     Pop two integers from the stack; let A be the next-to-top value,
     and B be the top value.  Shift A right by B bits, inserting zero
     bits at the high end, and push the result.

`log_not' (0x0e): A => !A
     Pop an integer from the stack; if it is zero, push the value one;
     otherwise, push the value zero.

`bit_and' (0x0f): A B => A&B
     Pop two integers from the stack, and push their bitwise `and'.

`bit_or' (0x10): A B => A|B
     Pop two integers from the stack, and push their bitwise `or'.

`bit_xor' (0x11): A B => A^B
     Pop two integers from the stack, and push their bitwise
     exclusive-`or'.

`bit_not' (0x12): A => ~A
     Pop an integer from the stack, and push its bitwise complement.

`equal' (0x13): A B => A=B
     Pop two integers from the stack; if they are equal, push the value
     one; otherwise, push the value zero.

`less_signed' (0x14): A B => A<B
     Pop two signed integers from the stack; if the next-to-top value
     is less than the top value, push the value one; otherwise, push
     the value zero.

`less_unsigned' (0x15): A B => A<B
     Pop two unsigned integers from the stack; if the next-to-top value
     is less than the top value, push the value one; otherwise, push
     the value zero.

`ext' (0x16) N: A => A, sign-extended from N bits
     Pop an unsigned value from the stack; treating it as an N-bit
     twos-complement value, extend it to full length.  This means that
     all bits to the left of bit N-1 (where the least significant bit
     is bit 0) are set to the value of bit N-1.  Note that N may be
     larger than or equal to the width of the stack elements of the
     bytecode engine; in this case, the bytecode should have no effect.

     The number of source bits to preserve, N, is encoded as a single
     byte unsigned integer following the `ext' bytecode.

`zero_ext' (0x2a) N: A => A, zero-extended from N bits
     Pop an unsigned value from the stack; zero all but the bottom N
     bits.  This means that all bits to the left of bit N-1 (where the
     least significant bit is bit 0) are set to the value of bit N-1.

     The number of source bits to preserve, N, is encoded as a single
     byte unsigned integer following the `zero_ext' bytecode.

`ref8' (0x17): ADDR => A
`ref16' (0x18): ADDR => A
`ref32' (0x19): ADDR => A
`ref64' (0x1a): ADDR => A
     Pop an address ADDR from the stack.  For bytecode `ref'N, fetch an
     N-bit value from ADDR, using the natural target endianness.  Push
     the fetched value as an unsigned integer.

     Note that ADDR may not be aligned in any particular way; the
     `refN' bytecodes should operate correctly for any address.

     If attempting to access memory at ADDR would cause a processor
     exception of some sort, terminate with an error.

`ref_float' (0x1b): ADDR => D
`ref_double' (0x1c): ADDR => D
`ref_long_double' (0x1d): ADDR => D
`l_to_d' (0x1e): A => D
`d_to_l' (0x1f): D => A
     Not implemented yet.

`dup' (0x28): A => A A
     Push another copy of the stack's top element.

`swap' (0x2b): A B => B A
     Exchange the top two items on the stack.

`pop' (0x29): A =>
     Discard the top value on the stack.

`if_goto' (0x20) OFFSET: A =>
     Pop an integer off the stack; if it is non-zero, branch to the
     given offset in the bytecode string.  Otherwise, continue to the
     next instruction in the bytecode stream.  In other words, if A is
     non-zero, set the `pc' register to `start' + OFFSET.  Thus, an
     offset of zero denotes the beginning of the expression.

     The OFFSET is stored as a sixteen-bit unsigned value, stored
     immediately following the `if_goto' bytecode.  It is always stored
     most significant byte first, regardless of the target's normal
     endianness.  The offset is not guaranteed to fall at any particular
     alignment within the bytecode stream; thus, on machines where
     fetching a 16-bit on an unaligned address raises an exception, you
     should fetch the offset one byte at a time.

`goto' (0x21) OFFSET: =>
     Branch unconditionally to OFFSET; in other words, set the `pc'
     register to `start' + OFFSET.

     The offset is stored in the same way as for the `if_goto' bytecode.

`const8' (0x22) N: => N
`const16' (0x23) N: => N
`const32' (0x24) N: => N
`const64' (0x25) N: => N
     Push the integer constant N on the stack, without sign extension.
     To produce a small negative value, push a small twos-complement
     value, and then sign-extend it using the `ext' bytecode.

     The constant N is stored in the appropriate number of bytes
     following the `const'B bytecode.  The constant N is always stored
     most significant byte first, regardless of the target's normal
     endianness.  The constant is not guaranteed to fall at any
     particular alignment within the bytecode stream; thus, on machines
     where fetching a 16-bit on an unaligned address raises an
     exception, you should fetch N one byte at a time.

`reg' (0x26) N: => A
     Push the value of register number N, without sign extension.  The
     registers are numbered following GDB's conventions.

     The register number N is encoded as a 16-bit unsigned integer
     immediately following the `reg' bytecode.  It is always stored most
     significant byte first, regardless of the target's normal
     endianness.  The register number is not guaranteed to fall at any
     particular alignment within the bytecode stream; thus, on machines
     where fetching a 16-bit on an unaligned address raises an
     exception, you should fetch the register number one byte at a time.

`trace' (0x0c): ADDR SIZE =>
     Record the contents of the SIZE bytes at ADDR in a trace buffer,
     for later retrieval by GDB.

`trace_quick' (0x0d) SIZE: ADDR => ADDR
     Record the contents of the SIZE bytes at ADDR in a trace buffer,
     for later retrieval by GDB.  SIZE is a single byte unsigned
     integer following the `trace' opcode.

     This bytecode is equivalent to the sequence `dup const8 SIZE
     trace', but we provide it anyway to save space in bytecode strings.

`trace16' (0x30) SIZE: ADDR => ADDR
     Identical to trace_quick, except that SIZE is a 16-bit big-endian
     unsigned integer, not a single byte.  This should probably have
     been named `trace_quick16', for consistency.

`end' (0x27): =>
     Stop executing bytecode; the result should be the top element of
     the stack.  If the purpose of the expression was to compute an
     lvalue or a range of memory, then the next-to-top of the stack is
     the lvalue's address, and the top of the stack is the lvalue's
     size, in bytes.


\x1f
File: gdb.info,  Node: Using Agent Expressions,  Next: Varying Target Capabilities,  Prev: Bytecode Descriptions,  Up: Agent Expressions

E.3 Using Agent Expressions
===========================

Here is a sketch of a full non-stop debugging cycle, showing how agent
expressions fit into the process.

   * The user selects trace points in the program's code at which GDB
     should collect data.

   * The user specifies expressions to evaluate at each trace point.
     These expressions may denote objects in memory, in which case
     those objects' contents are recorded as the program runs, or
     computed values, in which case the values themselves are recorded.

   * GDB transmits the tracepoints and their associated expressions to
     the GDB agent, running on the debugging target.

   * The agent arranges to be notified when a trace point is hit.  Note
     that, on some systems, the target operating system is completely
     responsible for collecting the data; see *Note Tracing on
     Symmetrix::.

   * When execution on the target reaches a trace point, the agent
     evaluates the expressions associated with that trace point, and
     records the resulting values and memory ranges.

   * Later, when the user selects a given trace event and inspects the
     objects and expression values recorded, GDB talks to the agent to
     retrieve recorded data as necessary to meet the user's requests.
     If the user asks to see an object whose contents have not been
     recorded, GDB reports an error.


\x1f
File: gdb.info,  Node: Varying Target Capabilities,  Next: Tracing on Symmetrix,  Prev: Using Agent Expressions,  Up: Agent Expressions

E.4 Varying Target Capabilities
===============================

Some targets don't support floating-point, and some would rather not
have to deal with `long long' operations.  Also, different targets will
have different stack sizes, and different bytecode buffer lengths.

   Thus, GDB needs a way to ask the target about itself.  We haven't
worked out the details yet, but in general, GDB should be able to send
the target a packet asking it to describe itself.  The reply should be a
packet whose length is explicit, so we can add new information to the
packet in future revisions of the agent, without confusing old versions
of GDB, and it should contain a version number.  It should contain at
least the following information:

   * whether floating point is supported

   * whether `long long' is supported

   * maximum acceptable size of bytecode stack

   * maximum acceptable length of bytecode expressions

   * which registers are actually available for collection

   * whether the target supports disabled tracepoints


\x1f
File: gdb.info,  Node: Tracing on Symmetrix,  Next: Rationale,  Prev: Varying Target Capabilities,  Up: Agent Expressions

E.5 Tracing on Symmetrix
========================

This section documents the API used by the GDB agent to collect data on
Symmetrix systems.

   Cygnus originally implemented these tracing features to help EMC
Corporation debug their Symmetrix high-availability disk drives.  The
Symmetrix application code already includes substantial tracing
facilities; the GDB agent for the Symmetrix system uses those facilities
for its own data collection, via the API described here.

 -- Function: DTC_RESPONSE adbg_find_memory_in_frame (FRAME_DEF *FRAME,
          char *ADDRESS, char **BUFFER, unsigned int *SIZE)
     Search the trace frame FRAME for memory saved from ADDRESS.  If
     the memory is available, provide the address of the buffer holding
     it; otherwise, provide the address of the next saved area.

        * If the memory at ADDRESS was saved in FRAME, set `*BUFFER' to
          point to the buffer in which that memory was saved, set
          `*SIZE' to the number of bytes from ADDRESS that are saved at
          `*BUFFER', and return `OK_TARGET_RESPONSE'.  (Clearly, in
          this case, the function will always set `*SIZE' to a value
          greater than zero.)

        * If FRAME does not record any memory at ADDRESS, set `*SIZE'
          to the distance from ADDRESS to the start of the saved region
          with the lowest address higher than ADDRESS.  If there is no
          memory saved from any higher address, set `*SIZE' to zero.
          Return `NOT_FOUND_TARGET_RESPONSE'.

     These two possibilities allow the caller to either retrieve the
     data, or walk the address space to the next saved area.

   This function allows the GDB agent to map the regions of memory
saved in a particular frame, and retrieve their contents efficiently.

   This function also provides a clean interface between the GDB agent
and the Symmetrix tracing structures, making it easier to adapt the GDB
agent to future versions of the Symmetrix system, and vice versa.  This
function searches all data saved in FRAME, whether the data is there at
the request of a bytecode expression, or because it falls in one of the
format's memory ranges, or because it was saved from the top of the
stack.  EMC can arbitrarily change and enhance the tracing mechanism,
but as long as this function works properly, all collected memory is
visible to GDB.

   The function itself is straightforward to implement.  A single pass
over the trace frame's stack area, memory ranges, and expression blocks
can yield the address of the buffer (if the requested address was
saved), and also note the address of the next higher range of memory,
to be returned when the search fails.

   As an example, suppose the trace frame `f' has saved sixteen bytes
from address `0x8000' in a buffer at `0x1000', and thirty-two bytes
from address `0xc000' in a buffer at `0x1010'.  Here are some sample
calls, and the effect each would have:

`adbg_find_memory_in_frame (f, (char*) 0x8000, &buffer, &size)'
     This would set `buffer' to `0x1000', set `size' to sixteen, and
     return `OK_TARGET_RESPONSE', since `f' saves sixteen bytes from
     `0x8000' at `0x1000'.

`adbg_find_memory_in_frame (f, (char *) 0x8004, &buffer, &size)'
     This would set `buffer' to `0x1004', set `size' to twelve, and
     return `OK_TARGET_RESPONSE', since `f' saves the twelve bytes from
     `0x8004' starting four bytes into the buffer at `0x1000'.  This
     shows that request addresses may fall in the middle of saved
     areas; the function should return the address and size of the
     remainder of the buffer.

`adbg_find_memory_in_frame (f, (char *) 0x8100, &buffer, &size)'
     This would set `size' to `0x3f00' and return
     `NOT_FOUND_TARGET_RESPONSE', since there is no memory saved in `f'
     from the address `0x8100', and the next memory available is at
     `0x8100 + 0x3f00', or `0xc000'.  This shows that request addresses
     may fall outside of all saved memory ranges; the function should
     indicate the next saved area, if any.

`adbg_find_memory_in_frame (f, (char *) 0x7000, &buffer, &size)'
     This would set `size' to `0x1000' and return
     `NOT_FOUND_TARGET_RESPONSE', since the next saved memory is at
     `0x7000 + 0x1000', or `0x8000'.

`adbg_find_memory_in_frame (f, (char *) 0xf000, &buffer, &size)'
     This would set `size' to zero, and return
     `NOT_FOUND_TARGET_RESPONSE'.  This shows how the function tells the
     caller that no further memory ranges have been saved.


   As another example, here is a function which will print out the
addresses of all memory saved in the trace frame `frame' on the
Symmetrix INLINES console:
     void
     print_frame_addresses (FRAME_DEF *frame)
     {
       char *addr;
       char *buffer;
       unsigned long size;

       addr = 0;
       for (;;)
         {
           /* Either find out how much memory we have here, or discover
              where the next saved region is.  */
           if (adbg_find_memory_in_frame (frame, addr, &buffer, &size)
               == OK_TARGET_RESPONSE)
             printp ("saved %x to %x\n", addr, addr + size);
           if (size == 0)
             break;
           addr += size;
         }
     }

   Note that there is not necessarily any connection between the order
in which the data is saved in the trace frame, and the order in which
`adbg_find_memory_in_frame' will return those memory ranges.  The code
above will always print the saved memory regions in order of increasing
address, while the underlying frame structure might store the data in a
random order.

   [[This section should cover the rest of the Symmetrix functions the
stub relies upon, too.]]

\x1f
File: gdb.info,  Node: Rationale,  Prev: Tracing on Symmetrix,  Up: Agent Expressions

E.6 Rationale
=============

Some of the design decisions apparent above are arguable.

What about stack overflow/underflow?
     GDB should be able to query the target to discover its stack size.
     Given that information, GDB can determine at translation time
     whether a given expression will overflow the stack.  But this spec
     isn't about what kinds of error-checking GDB ought to do.

Why are you doing everything in LONGEST?
     Speed isn't important, but agent code size is; using LONGEST
     brings in a bunch of support code to do things like division, etc.
     So this is a serious concern.

     First, note that you don't need different bytecodes for different
     operand sizes.  You can generate code without _knowing_ how big the
     stack elements actually are on the target.  If the target only
     supports 32-bit ints, and you don't send any 64-bit bytecodes,
     everything just works.  The observation here is that the MIPS and
     the Alpha have only fixed-size registers, and you can still get
     C's semantics even though most instructions only operate on
     full-sized words.  You just need to make sure everything is
     properly sign-extended at the right times.  So there is no need
     for 32- and 64-bit variants of the bytecodes.  Just implement
     everything using the largest size you support.

     GDB should certainly check to see what sizes the target supports,
     so the user can get an error earlier, rather than later.  But this
     information is not necessary for correctness.

Why don't you have `>' or `<=' operators?
     I want to keep the interpreter small, and we don't need them.  We
     can combine the `less_' opcodes with `log_not', and swap the order
     of the operands, yielding all four asymmetrical comparison
     operators.  For example, `(x <= y)' is `! (x > y)', which is `! (y
     < x)'.

Why do you have `log_not'?
Why do you have `ext'?
Why do you have `zero_ext'?
     These are all easily synthesized from other instructions, but I
     expect them to be used frequently, and they're simple, so I
     include them to keep bytecode strings short.

     `log_not' is equivalent to `const8 0 equal'; it's used in half the
     relational operators.

     `ext N' is equivalent to `const8 S-N lsh const8 S-N rsh_signed',
     where S is the size of the stack elements; it follows `refM' and
     REG bytecodes when the value should be signed.  See the next
     bulleted item.

     `zero_ext N' is equivalent to `constM MASK log_and'; it's used
     whenever we push the value of a register, because we can't assume
     the upper bits of the register aren't garbage.

Why not have sign-extending variants of the `ref' operators?
     Because that would double the number of `ref' operators, and we
     need the `ext' bytecode anyway for accessing bitfields.

Why not have constant-address variants of the `ref' operators?
     Because that would double the number of `ref' operators again, and
     `const32 ADDRESS ref32' is only one byte longer.

Why do the `refN' operators have to support unaligned fetches?
     GDB will generate bytecode that fetches multi-byte values at
     unaligned addresses whenever the executable's debugging
     information tells it to.  Furthermore, GDB does not know the value
     the pointer will have when GDB generates the bytecode, so it
     cannot determine whether a particular fetch will be aligned or not.

     In particular, structure bitfields may be several bytes long, but
     follow no alignment rules; members of packed structures are not
     necessarily aligned either.

     In general, there are many cases where unaligned references occur
     in correct C code, either at the programmer's explicit request, or
     at the compiler's discretion.  Thus, it is simpler to make the GDB
     agent bytecodes work correctly in all circumstances than to make
     GDB guess in each case whether the compiler did the usual thing.

Why are there no side-effecting operators?
     Because our current client doesn't want them?  That's a cheap
     answer.  I think the real answer is that I'm afraid of
     implementing function calls.  We should re-visit this issue after
     the present contract is delivered.

Why aren't the `goto' ops PC-relative?
     The interpreter has the base address around anyway for PC bounds
     checking, and it seemed simpler.

Why is there only one offset size for the `goto' ops?
     Offsets are currently sixteen bits.  I'm not happy with this
     situation either:

     Suppose we have multiple branch ops with different offset sizes.
     As I generate code left-to-right, all my jumps are forward jumps
     (there are no loops in expressions), so I never know the target
     when I emit the jump opcode.  Thus, I have to either always assume
     the largest offset size, or do jump relaxation on the code after I
     generate it, which seems like a big waste of time.

     I can imagine a reasonable expression being longer than 256 bytes.
     I can't imagine one being longer than 64k.  Thus, we need 16-bit
     offsets.  This kind of reasoning is so bogus, but relaxation is
     pathetic.

     The other approach would be to generate code right-to-left.  Then
     I'd always know my offset size.  That might be fun.

Where is the function call bytecode?
     When we add side-effects, we should add this.

Why does the `reg' bytecode take a 16-bit register number?
     Intel's IA-64 architecture has 128 general-purpose registers, and
     128 floating-point registers, and I'm sure it has some random
     control registers.

Why do we need `trace' and `trace_quick'?
     Because GDB needs to record all the memory contents and registers
     an expression touches.  If the user wants to evaluate an expression
     `x->y->z', the agent must record the values of `x' and `x->y' as
     well as the value of `x->y->z'.

Don't the `trace' bytecodes make the interpreter less general?
     They do mean that the interpreter contains special-purpose code,
     but that doesn't mean the interpreter can only be used for that
     purpose.  If an expression doesn't use the `trace' bytecodes, they
     don't get in its way.

Why doesn't `trace_quick' consume its arguments the way everything else does?
     In general, you do want your operators to consume their arguments;
     it's consistent, and generally reduces the amount of stack
     rearrangement necessary.  However, `trace_quick' is a kludge to
     save space; it only exists so we needn't write `dup const8 SIZE
     trace' before every memory reference.  Therefore, it's okay for it
     not to consume its arguments; it's meant for a specific context in
     which we know exactly what it should do with the stack.  If we're
     going to have a kludge, it should be an effective kludge.

Why does `trace16' exist?
     That opcode was added by the customer that contracted Cygnus for
     the data tracing work.  I personally think it is unnecessary;
     objects that large will be quite rare, so it is okay to use `dup
     const16 SIZE trace' in those cases.

     Whatever we decide to do with `trace16', we should at least leave
     opcode 0x30 reserved, to remain compatible with the customer who
     added it.


\x1f
File: gdb.info,  Node: Target Descriptions,  Next: Copying,  Prev: Agent Expressions,  Up: Top

Appendix F Target Descriptions
******************************

*Warning:* target descriptions are still under active development, and
the contents and format may change between GDB releases.  The format is
expected to stabilize in the future.

   One of the challenges of using GDB to debug embedded systems is that
there are so many minor variants of each processor architecture in use.
It is common practice for vendors to start with a standard processor
core -- ARM, PowerPC, or MIPS, for example -- and then make changes to
adapt it to a particular market niche.  Some architectures have
hundreds of variants, available from dozens of vendors.  This leads to
a number of problems:

   * With so many different customized processors, it is difficult for
     the GDB maintainers to keep up with the changes.

   * Since individual variants may have short lifetimes or limited
     audiences, it may not be worthwhile to carry information about
     every variant in the GDB source tree.

   * When GDB does support the architecture of the embedded system at
     hand, the task of finding the correct architecture name to give the
     `set architecture' command can be error-prone.

   To address these problems, the GDB remote protocol allows a target
system to not only identify itself to GDB, but to actually describe its
own features.  This lets GDB support processor variants it has never
seen before -- to the extent that the descriptions are accurate, and
that GDB understands them.

   GDB must be linked with the Expat library to support XML target
descriptions.  *Note Expat::.

* Menu:

* Retrieving Descriptions::         How descriptions are fetched from a target.
* Target Description Format::       The contents of a target description.
* Predefined Target Types::         Standard types available for target
                                    descriptions.
* Standard Target Features::        Features GDB knows about.

\x1f
File: gdb.info,  Node: Retrieving Descriptions,  Next: Target Description Format,  Up: Target Descriptions

F.1 Retrieving Descriptions
===========================

Target descriptions can be read from the target automatically, or
specified by the user manually.  The default behavior is to read the
description from the target.  GDB retrieves it via the remote protocol
using `qXfer' requests (*note qXfer: General Query Packets.).  The
ANNEX in the `qXfer' packet will be `target.xml'.  The contents of the
`target.xml' annex are an XML document, of the form described in *Note
Target Description Format::.

   Alternatively, you can specify a file to read for the target
description.  If a file is set, the target will not be queried.  The
commands to specify a file are:

`set tdesc filename PATH'
     Read the target description from PATH.

`unset tdesc filename'
     Do not read the XML target description from a file.  GDB will use
     the description supplied by the current target.

`show tdesc filename'
     Show the filename to read for a target description, if any.

\x1f
File: gdb.info,  Node: Target Description Format,  Next: Predefined Target Types,  Prev: Retrieving Descriptions,  Up: Target Descriptions

F.2 Target Description Format
=============================

A target description annex is an XML (http://www.w3.org/XML/) document
which complies with the Document Type Definition provided in the GDB
sources in `gdb/features/gdb-target.dtd'.  This means you can use
generally available tools like `xmllint' to check that your feature
descriptions are well-formed and valid.  However, to help people
unfamiliar with XML write descriptions for their targets, we also
describe the grammar here.

   Target descriptions can identify the architecture of the remote
target and (for some architectures) provide information about custom
register sets.  GDB can use this information to autoconfigure for your
target, or to warn you if you connect to an unsupported target.

   Here is a simple target description:

     <target version="1.0">
       <architecture>i386:x86-64</architecture>
     </target>

This minimal description only says that the target uses the x86-64
architecture.

   A target description has the following overall form, with [ ] marking
optional elements and ... marking repeatable elements.  The elements
are explained further below.

     <?xml version="1.0"?>
     <!DOCTYPE target SYSTEM "gdb-target.dtd">
     <target version="1.0">
       [ARCHITECTURE]
       [FEATURE...]
     </target>

The description is generally insensitive to whitespace and line breaks,
under the usual common-sense rules.  The XML version declaration and
document type declaration can generally be omitted (GDB does not
require them), but specifying them may be useful for XML validation
tools.  The `version' attribute for `<target>' may also be omitted, but
we recommend including it; if future versions of GDB use an incompatible
revision of `gdb-target.dtd', they will detect and report the version
mismatch.

F.2.1 Inclusion
---------------

It can sometimes be valuable to split a target description up into
several different annexes, either for organizational purposes, or to
share files between different possible target descriptions.  You can
divide a description into multiple files by replacing any element of
the target description with an inclusion directive of the form:

     <xi:include href="DOCUMENT"/>

When GDB encounters an element of this form, it will retrieve the named
XML DOCUMENT, and replace the inclusion directive with the contents of
that document.  If the current description was read using `qXfer', then
so will be the included document; DOCUMENT will be interpreted as the
name of an annex.  If the current description was read from a file, GDB
will look for DOCUMENT as a file in the same directory where it found
the original description.

F.2.2 Architecture
------------------

An `<architecture>' element has this form:

       <architecture>ARCH</architecture>

   ARCH is an architecture name from the same selection accepted by
`set architecture' (*note Specifying a Debugging Target: Targets.).

F.2.3 Features
--------------

Each `<feature>' describes some logical portion of the target system.
Features are currently used to describe available CPU registers and the
types of their contents.  A `<feature>' element has this form:

     <feature name="NAME">
       [TYPE...]
       REG...
     </feature>

Each feature's name should be unique within the description.  The name
of a feature does not matter unless GDB has some special knowledge of
the contents of that feature; if it does, the feature should have its
standard name.  *Note Standard Target Features::.

F.2.4 Types
-----------

Any register's value is a collection of bits which GDB must interpret.
The default interpretation is a two's complement integer, but other
types can be requested by name in the register description.  Some
predefined types are provided by GDB (*note Predefined Target Types::),
and the description can define additional composite types.

   Each type element must have an `id' attribute, which gives a unique
(within the containing `<feature>') name to the type.  Types must be
defined before they are used.

   Some targets offer vector registers, which can be treated as arrays
of scalar elements.  These types are written as `<vector>' elements,
specifying the array element type, TYPE, and the number of elements,
COUNT:

     <vector id="ID" type="TYPE" count="COUNT"/>

   If a register's value is usefully viewed in multiple ways, define it
with a union type containing the useful representations.  The `<union>'
element contains one or more `<field>' elements, each of which has a
NAME and a TYPE:

     <union id="ID">
       <field name="NAME" type="TYPE"/>
       ...
     </union>

F.2.5 Registers
---------------

Each register is represented as an element with this form:

     <reg name="NAME"
          bitsize="SIZE"
          [regnum="NUM"]
          [save-restore="SAVE-RESTORE"]
          [type="TYPE"]
          [group="GROUP"]/>

The components are as follows:

NAME
     The register's name; it must be unique within the target
     description.

BITSIZE
     The register's size, in bits.

REGNUM
     The register's number.  If omitted, a register's number is one
     greater than that of the previous register (either in the current
     feature or in a preceeding feature); the first register in the
     target description defaults to zero.  This register number is used
     to read or write the register; e.g. it is used in the remote `p'
     and `P' packets, and registers appear in the `g' and `G' packets
     in order of increasing register number.

SAVE-RESTORE
     Whether the register should be preserved across inferior function
     calls; this must be either `yes' or `no'.  The default is `yes',
     which is appropriate for most registers except for some system
     control registers; this is not related to the target's ABI.

TYPE
     The type of the register.  TYPE may be a predefined type, a type
     defined in the current feature, or one of the special types `int'
     and `float'.  `int' is an integer type of the correct size for
     BITSIZE, and `float' is a floating point type (in the
     architecture's normal floating point format) of the correct size
     for BITSIZE.  The default is `int'.

GROUP
     The register group to which this register belongs.  GROUP must be
     either `general', `float', or `vector'.  If no GROUP is specified,
     GDB will not display the register in `info registers'.


\x1f
File: gdb.info,  Node: Predefined Target Types,  Next: Standard Target Features,  Prev: Target Description Format,  Up: Target Descriptions

F.3 Predefined Target Types
===========================

Type definitions in the self-description can build up composite types
from basic building blocks, but can not define fundamental types.
Instead, standard identifiers are provided by GDB for the fundamental
types.  The currently supported types are:

`int8'
`int16'
`int32'
`int64'
`int128'
     Signed integer types holding the specified number of bits.

`uint8'
`uint16'
`uint32'
`uint64'
`uint128'
     Unsigned integer types holding the specified number of bits.

`code_ptr'
`data_ptr'
     Pointers to unspecified code and data.  The program counter and
     any dedicated return address register may be marked as code
     pointers; printing a code pointer converts it into a symbolic
     address.  The stack pointer and any dedicated address registers
     may be marked as data pointers.

`ieee_single'
     Single precision IEEE floating point.

`ieee_double'
     Double precision IEEE floating point.

`arm_fpa_ext'
     The 12-byte extended precision format used by ARM FPA registers.


\x1f
File: gdb.info,  Node: Standard Target Features,  Prev: Predefined Target Types,  Up: Target Descriptions

F.4 Standard Target Features
============================

A target description must contain either no registers or all the
target's registers.  If the description contains no registers, then GDB
will assume a default register layout, selected based on the
architecture.  If the description contains any registers, the default
layout will not be used; the standard registers must be described in
the target description, in such a way that GDB can recognize them.

   This is accomplished by giving specific names to feature elements
which contain standard registers.  GDB will look for features with
those names and verify that they contain the expected registers; if any
known feature is missing required registers, or if any required feature
is missing, GDB will reject the target description.  You can add
additional registers to any of the standard features -- GDB will
display them just as if they were added to an unrecognized feature.

   This section lists the known features and their expected contents.
Sample XML documents for these features are included in the GDB source
tree, in the directory `gdb/features'.

   Names recognized by GDB should include the name of the company or
organization which selected the name, and the overall architecture to
which the feature applies; so e.g. the feature containing ARM core
registers is named `org.gnu.gdb.arm.core'.

   The names of registers are not case sensitive for the purpose of
recognizing standard features, but GDB will only display registers
using the capitalization used in the description.

* Menu:

* ARM Features::
* MIPS Features::
* M68K Features::
* PowerPC Features::

\x1f
File: gdb.info,  Node: ARM Features,  Next: MIPS Features,  Up: Standard Target Features

F.4.1 ARM Features
------------------

The `org.gnu.gdb.arm.core' feature is required for ARM targets.  It
should contain registers `r0' through `r13', `sp', `lr', `pc', and
`cpsr'.

   The `org.gnu.gdb.arm.fpa' feature is optional.  If present, it
should contain registers `f0' through `f7' and `fps'.

   The `org.gnu.gdb.xscale.iwmmxt' feature is optional.  If present, it
should contain at least registers `wR0' through `wR15' and `wCGR0'
through `wCGR3'.  The `wCID', `wCon', `wCSSF', and `wCASF' registers
are optional.

\x1f
File: gdb.info,  Node: MIPS Features,  Next: M68K Features,  Prev: ARM Features,  Up: Standard Target Features

F.4.2 MIPS Features
-------------------

The `org.gnu.gdb.mips.cpu' feature is required for MIPS targets.  It
should contain registers `r0' through `r31', `lo', `hi', and `pc'.
They may be 32-bit or 64-bit depending on the target.

   The `org.gnu.gdb.mips.cp0' feature is also required.  It should
contain at least the `status', `badvaddr', and `cause' registers.  They
may be 32-bit or 64-bit depending on the target.

   The `org.gnu.gdb.mips.fpu' feature is currently required, though it
may be optional in a future version of GDB.  It should contain
registers `f0' through `f31', `fcsr', and `fir'.  They may be 32-bit or
64-bit depending on the target.

   The `org.gnu.gdb.mips.linux' feature is optional.  It should contain
a single register, `restart', which is used by the Linux kernel to
control restartable syscalls.

\x1f
File: gdb.info,  Node: M68K Features,  Next: PowerPC Features,  Prev: MIPS Features,  Up: Standard Target Features

F.4.3 M68K Features
-------------------

``org.gnu.gdb.m68k.core''
``org.gnu.gdb.coldfire.core''
``org.gnu.gdb.fido.core''
     One of those features must be always present.  The feature that is
     present determines which flavor of m86k is used.  The feature that
     is present should contain registers `d0' through `d7', `a0'
     through `a5', `fp', `sp', `ps' and `pc'.

``org.gnu.gdb.coldfire.fp''
     This feature is optional.  If present, it should contain registers
     `fp0' through `fp7', `fpcontrol', `fpstatus' and `fpiaddr'.

\x1f
File: gdb.info,  Node: PowerPC Features,  Prev: M68K Features,  Up: Standard Target Features

F.4.4 PowerPC Features
----------------------

The `org.gnu.gdb.power.core' feature is required for PowerPC targets.
It should contain registers `r0' through `r31', `pc', `msr', `cr',
`lr', `ctr', and `xer'.  They may be 32-bit or 64-bit depending on the
target.

   The `org.gnu.gdb.power.fpu' feature is optional.  It should contain
registers `f0' through `f31' and `fpscr'.

   The `org.gnu.gdb.power.altivec' feature is optional.  It should
contain registers `vr0' through `vr31', `vscr', and `vrsave'.

   The `org.gnu.gdb.power.spe' feature is optional.  It should contain
registers `ev0h' through `ev31h', `acc', and `spefscr'.  SPE targets
should provide 32-bit registers in `org.gnu.gdb.power.core' and provide
the upper halves in `ev0h' through `ev31h'.  GDB will combine these to
present registers `ev0' through `ev31' to the user.

\x1f
File: gdb.info,  Node: Copying,  Next: GNU Free Documentation License,  Prev: Target Descriptions,  Up: Top

Appendix G GNU GENERAL PUBLIC LICENSE
*************************************

                         Version 2, June 1991

     Copyright (C) 1989, 1991 Free Software Foundation, Inc.
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

Preamble
========

The licenses for most software are designed to take away your freedom
to share and change it.  By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.)  You can apply it to
your programs, too.

   When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.

   To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

   For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

   We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

   Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

   Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

   The precise terms and conditions for copying, distribution and
modification follow.

    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
  0. This License applies to any program or other work which contains a
     notice placed by the copyright holder saying it may be distributed
     under the terms of this General Public License.  The "Program",
     below, refers to any such program or work, and a "work based on
     the Program" means either the Program or any derivative work under
     copyright law: that is to say, a work containing the Program or a
     portion of it, either verbatim or with modifications and/or
     translated into another language.  (Hereinafter, translation is
     included without limitation in the term "modification".)  Each
     licensee is addressed as "you".

     Activities other than copying, distribution and modification are
     not covered by this License; they are outside its scope.  The act
     of running the Program is not restricted, and the output from the
     Program is covered only if its contents constitute a work based on
     the Program (independent of having been made by running the
     Program).  Whether that is true depends on what the Program does.

  1. You may copy and distribute verbatim copies of the Program's
     source code as you receive it, in any medium, provided that you
     conspicuously and appropriately publish on each copy an appropriate
     copyright notice and disclaimer of warranty; keep intact all the
     notices that refer to this License and to the absence of any
     warranty; and give any other recipients of the Program a copy of
     this License along with the Program.

     You may charge a fee for the physical act of transferring a copy,
     and you may at your option offer warranty protection in exchange
     for a fee.

  2. You may modify your copy or copies of the Program or any portion
     of it, thus forming a work based on the Program, and copy and
     distribute such modifications or work under the terms of Section 1
     above, provided that you also meet all of these conditions:

       a. You must cause the modified files to carry prominent notices
          stating that you changed the files and the date of any change.

       b. You must cause any work that you distribute or publish, that
          in whole or in part contains or is derived from the Program
          or any part thereof, to be licensed as a whole at no charge
          to all third parties under the terms of this License.

       c. If the modified program normally reads commands interactively
          when run, you must cause it, when started running for such
          interactive use in the most ordinary way, to print or display
          an announcement including an appropriate copyright notice and
          a notice that there is no warranty (or else, saying that you
          provide a warranty) and that users may redistribute the
          program under these conditions, and telling the user how to
          view a copy of this License.  (Exception: if the Program
          itself is interactive but does not normally print such an
          announcement, your work based on the Program is not required
          to print an announcement.)

     These requirements apply to the modified work as a whole.  If
     identifiable sections of that work are not derived from the
     Program, and can be reasonably considered independent and separate
     works in themselves, then this License, and its terms, do not
     apply to those sections when you distribute them as separate
     works.  But when you distribute the same sections as part of a
     whole which is a work based on the Program, the distribution of
     the whole must be on the terms of this License, whose permissions
     for other licensees extend to the entire whole, and thus to each
     and every part regardless of who wrote it.

     Thus, it is not the intent of this section to claim rights or
     contest your rights to work written entirely by you; rather, the
     intent is to exercise the right to control the distribution of
     derivative or collective works based on the Program.

     In addition, mere aggregation of another work not based on the
     Program with the Program (or with a work based on the Program) on
     a volume of a storage or distribution medium does not bring the
     other work under the scope of this License.

  3. You may copy and distribute the Program (or a work based on it,
     under Section 2) in object code or executable form under the terms
     of Sections 1 and 2 above provided that you also do one of the
     following:

       a. Accompany it with the complete corresponding machine-readable
          source code, which must be distributed under the terms of
          Sections 1 and 2 above on a medium customarily used for
          software interchange; or,

       b. Accompany it with a written offer, valid for at least three
          years, to give any third party, for a charge no more than your
          cost of physically performing source distribution, a complete
          machine-readable copy of the corresponding source code, to be
          distributed under the terms of Sections 1 and 2 above on a
          medium customarily used for software interchange; or,

       c. Accompany it with the information you received as to the offer
          to distribute corresponding source code.  (This alternative is
          allowed only for noncommercial distribution and only if you
          received the program in object code or executable form with
          such an offer, in accord with Subsection b above.)

     The source code for a work means the preferred form of the work for
     making modifications to it.  For an executable work, complete
     source code means all the source code for all modules it contains,
     plus any associated interface definition files, plus the scripts
     used to control compilation and installation of the executable.
     However, as a special exception, the source code distributed need
     not include anything that is normally distributed (in either
     source or binary form) with the major components (compiler,
     kernel, and so on) of the operating system on which the executable
     runs, unless that component itself accompanies the executable.

     If distribution of executable or object code is made by offering
     access to copy from a designated place, then offering equivalent
     access to copy the source code from the same place counts as
     distribution of the source code, even though third parties are not
     compelled to copy the source along with the object code.

  4. You may not copy, modify, sublicense, or distribute the Program
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense or distribute the Program is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

  5. You are not required to accept this License, since you have not
     signed it.  However, nothing else grants you permission to modify
     or distribute the Program or its derivative works.  These actions
     are prohibited by law if you do not accept this License.
     Therefore, by modifying or distributing the Program (or any work
     based on the Program), you indicate your acceptance of this
     License to do so, and all its terms and conditions for copying,
     distributing or modifying the Program or works based on it.

  6. Each time you redistribute the Program (or any work based on the
     Program), the recipient automatically receives a license from the
     original licensor to copy, distribute or modify the Program
     subject to these terms and conditions.  You may not impose any
     further restrictions on the recipients' exercise of the rights
     granted herein.  You are not responsible for enforcing compliance
     by third parties to this License.

  7. If, as a consequence of a court judgment or allegation of patent
     infringement or for any other reason (not limited to patent
     issues), conditions are imposed on you (whether by court order,
     agreement or otherwise) that contradict the conditions of this
     License, they do not excuse you from the conditions of this
     License.  If you cannot distribute so as to satisfy simultaneously
     your obligations under this License and any other pertinent
     obligations, then as a consequence you may not distribute the
     Program at all.  For example, if a patent license would not permit
     royalty-free redistribution of the Program by all those who
     receive copies directly or indirectly through you, then the only
     way you could satisfy both it and this License would be to refrain
     entirely from distribution of the Program.

     If any portion of this section is held invalid or unenforceable
     under any particular circumstance, the balance of the section is
     intended to apply and the section as a whole is intended to apply
     in other circumstances.

     It is not the purpose of this section to induce you to infringe any
     patents or other property right claims or to contest validity of
     any such claims; this section has the sole purpose of protecting
     the integrity of the free software distribution system, which is
     implemented by public license practices.  Many people have made
     generous contributions to the wide range of software distributed
     through that system in reliance on consistent application of that
     system; it is up to the author/donor to decide if he or she is
     willing to distribute software through any other system and a
     licensee cannot impose that choice.

     This section is intended to make thoroughly clear what is believed
     to be a consequence of the rest of this License.

  8. If the distribution and/or use of the Program is restricted in
     certain countries either by patents or by copyrighted interfaces,
     the original copyright holder who places the Program under this
     License may add an explicit geographical distribution limitation
     excluding those countries, so that distribution is permitted only
     in or among countries not thus excluded.  In such case, this
     License incorporates the limitation as if written in the body of
     this License.

  9. The Free Software Foundation may publish revised and/or new
     versions of the General Public License from time to time.  Such
     new versions will be similar in spirit to the present version, but
     may differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the
     Program specifies a version number of this License which applies
     to it and "any later version", you have the option of following
     the terms and conditions either of that version or of any later
     version published by the Free Software Foundation.  If the Program
     does not specify a version number of this License, you may choose
     any version ever published by the Free Software Foundation.

 10. If you wish to incorporate parts of the Program into other free
     programs whose distribution conditions are different, write to the
     author to ask for permission.  For software which is copyrighted
     by the Free Software Foundation, write to the Free Software
     Foundation; we sometimes make exceptions for this.  Our decision
     will be guided by the two goals of preserving the free status of
     all derivatives of our free software and of promoting the sharing
     and reuse of software generally.

                                NO WARRANTY
 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
     WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
     LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
     HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
     WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
     NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE
     QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
     PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
     SERVICING, REPAIR OR CORRECTION.

 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
     MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
     LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
     INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
     INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
     DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
     OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
     OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

                      END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
=============================================

If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.

   To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

     ONE LINE TO GIVE THE PROGRAM'S NAME AND A BRIEF IDEA OF WHAT IT DOES.
     Copyright (C) YEAR  NAME OF AUTHOR

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 51 Franklin Street, Fifth Floor,
     Boston, MA 02110-1301, USA.

   Also add information on how to contact you by electronic and paper
mail.

   If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:

     Gnomovision version 69, Copyright (C) YEAR NAME OF AUTHOR
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
     type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

   The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License.  Of course, the
commands you use may be called something other than `show w' and `show
c'; they could even be mouse-clicks or menu items--whatever suits your
program.

   You should also get your employer (if you work as a programmer) or
your school, if any, to sign a "copyright disclaimer" for the program,
if necessary.  Here is a sample; alter the names:

     Yoyodyne, Inc., hereby disclaims all copyright interest in the program
     `Gnomovision' (which makes passes at compilers) written by James Hacker.

     SIGNATURE OF TY COON, 1 April 1989
     Ty Coon, President of Vice

   This General Public License does not permit incorporating your
program into proprietary programs.  If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library.  If this is what you want to do, use the
GNU Library General Public License instead of this License.

\x1f
File: gdb.info,  Node: GNU Free Documentation License,  Next: Index,  Prev: Copying,  Up: Top

Appendix H GNU Free Documentation License
*****************************************

                      Version 1.2, November 2002

     Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.
     We recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it
     can be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     "Document", below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as "you".  You
     accept the license if you copy, modify or distribute the work in a
     way requiring permission under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in
     the notice that says that the Document is released under this
     License.  If a section does not fit the above definition of
     Secondary then it is not allowed to be designated as Invariant.
     The Document may contain zero Invariant Sections.  If the Document
     does not identify any Invariant Sections then there are none.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images
     composed of pixels) generic paint programs or (for drawings) some
     widely available drawing editor, and that is suitable for input to
     text formatters or for automatic translation to a variety of
     formats suitable for input to text formatters.  A copy made in an
     otherwise Transparent file format whose markup, or absence of
     markup, has been arranged to thwart or discourage subsequent
     modification by readers is not Transparent.  An image format is
     not Transparent if used for any substantial amount of text.  A
     copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and
     standard-conforming simple HTML, PostScript or PDF designed for
     human modification.  Examples of transparent image formats include
     PNG, XCF and JPG.  Opaque formats include proprietary formats that
     can be read and edited only by proprietary word processors, SGML or
     XML for which the DTD and/or processing tools are not generally
     available, and the machine-generated HTML, PostScript or PDF
     produced by some word processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

     A section "Entitled XYZ" means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     "Acknowledgements", "Dedications", "Endorsements", or "History".)
     To "Preserve the Title" of such a section when you modify the
     Document means that it remains a section "Entitled XYZ" according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow
     the conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document's license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the
     title equally prominent and visible.  You may add other material
     on the covers in addition.  Copying with changes limited to the
     covers, as long as they preserve the title of the Document and
     satisfy these conditions, can be treated as verbatim copying in
     other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a
     machine-readable Transparent copy along with each Opaque copy, or
     state in or with each Opaque copy a computer-network location from
     which the general network-using public has access to download
     using public-standard network protocols a complete Transparent
     copy of the Document, free of added material.  If you use the
     latter option, you must take reasonably prudent steps, when you
     begin distribution of Opaque copies in quantity, to ensure that
     this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you
     distribute an Opaque copy (directly or through your agents or
     retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of
     copies, to give them a chance to provide you with an updated
     version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with
     the Modified Version filling the role of the Document, thus
     licensing distribution and modification of the Modified Version to
     whoever possesses a copy of it.  In addition, you must do these
     things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of
          previous versions (which should, if there were any, be listed
          in the History section of the Document).  You may use the
          same title as a previous version if the original publisher of
          that version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on
          the Title Page.  If there is no section Entitled "History" in
          the Document, create one stating the title, year, authors,
          and publisher of the Document as given on its Title Page,
          then add an item describing the Modified Version as stated in
          the previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in
          the "History" section.  You may omit a network location for a
          work that was published at least four years before the
          Document itself, or if the original publisher of the version
          it refers to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the
          section all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document,
          unaltered in their text and in their titles.  Section numbers
          or the equivalent are not considered part of the section
          titles.

       M. Delete any section Entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          "Endorsements" or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option
     designate some or all of these sections as invariant.  To do this,
     add their titles to the list of Invariant Sections in the Modified
     Version's license notice.  These titles must be distinct from any
     other section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end
     of the list of Cover Texts in the Modified Version.  Only one
     passage of Front-Cover Text and one of Back-Cover Text may be
     added by (or through arrangements made by) any one entity.  If the
     Document already includes a cover text for the same cover,
     previously added by you or by arrangement made by the same entity
     you are acting on behalf of, you may not add another; but you may
     replace the old one, on explicit permission from the previous
     publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination
     all of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     "History" in the various original documents, forming one section
     Entitled "History"; likewise combine any sections Entitled
     "Acknowledgements", and any sections Entitled "Dedications".  You
     must delete all sections Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the
     documents in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow
     this License in all other respects regarding verbatim copying of
     that document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of
     a storage or distribution medium, is called an "aggregate" if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation's users beyond what the individual
     works permit.  When the Document is included in an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document's Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided for under this License.  Any other
     attempt to copy, modify, sublicense or distribute the Document is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     `http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If
     the Document does not specify a version number of this License,
     you may choose any version ever published (not as a draft) by the
     Free Software Foundation.

H.1 ADDENDUM: How to use this License for your documents
========================================================

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.2
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
       Texts.  A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.

\x1f
File: gdb.info,  Node: Index,  Prev: GNU Free Documentation License,  Up: Top

Index
*****

\0\b[index\0\b]
* Menu:

* ! packet:                              Packets.             (line  26)
* "No symbol "foo" in current context":  Variables.           (line  74)
* # (a comment):                         Command Syntax.      (line  38)
* # in Modula-2:                         GDB/M2.              (line  18)
* $:                                     Value History.       (line  13)
* $$:                                    Value History.       (line  13)
* $_ and info breakpoints:               Set Breaks.          (line 112)
* $_ and info line:                      Machine Code.        (line  29)
* $_, $__, and value history:            Memory.              (line  91)
* $_, convenience variable:              Convenience Vars.    (line  64)
* $__, convenience variable:             Convenience Vars.    (line  73)
* $_exitcode, convenience variable:      Convenience Vars.    (line  79)
* $bpnum, convenience variable:          Set Breaks.          (line   6)
* $cdir, convenience variable:           Source Path.         (line  99)
* $cwd, convenience variable:            Source Path.         (line  99)
* $tpnum:                                Create and Delete Tracepoints.
                                                              (line  31)
* $trace_file:                           Tracepoint Variables.
                                                              (line  16)
* $trace_frame:                          Tracepoint Variables.
                                                              (line   6)
* $trace_func:                           Tracepoint Variables.
                                                              (line  19)
* $trace_line:                           Tracepoint Variables.
                                                              (line  13)
* $tracepoint:                           Tracepoint Variables.
                                                              (line  10)
* --annotate:                            Mode Options.        (line 101)
* --args:                                Mode Options.        (line 114)
* --batch:                               Mode Options.        (line  23)
* --batch-silent:                        Mode Options.        (line  39)
* --baud:                                Mode Options.        (line 120)
* --cd:                                  Mode Options.        (line  80)
* --command:                             File Options.        (line  51)
* --core:                                File Options.        (line  43)
* --directory:                           File Options.        (line  66)
* --epoch:                               Mode Options.        (line  96)
* --eval-command:                        File Options.        (line  56)
* --exec:                                File Options.        (line  35)
* --fullname:                            Mode Options.        (line  85)
* --interpreter:                         Mode Options.        (line 141)
* --nowindows:                           Mode Options.        (line  70)
* --nx:                                  Mode Options.        (line  11)
* --pid:                                 File Options.        (line  47)
* --quiet:                               Mode Options.        (line  19)
* --readnow:                             File Options.        (line  70)
* --return-child-result:                 Mode Options.        (line  51)
* --se:                                  File Options.        (line  39)
* --silent:                              Mode Options.        (line  19)
* --statistics:                          Mode Options.        (line 158)
* --symbols:                             File Options.        (line  31)
* --tty:                                 Mode Options.        (line 129)
* --tui:                                 Mode Options.        (line 132)
* --version:                             Mode Options.        (line 162)
* --windows:                             Mode Options.        (line  76)
* --with-sysroot:                        Files.               (line 381)
* --write:                               Mode Options.        (line 153)
* -b:                                    Mode Options.        (line 120)
* -break-after:                          GDB/MI Breakpoint Commands.
                                                              (line  11)
* -break-condition:                      GDB/MI Breakpoint Commands.
                                                              (line  54)
* -break-delete:                         GDB/MI Breakpoint Commands.
                                                              (line  91)
* -break-disable:                        GDB/MI Breakpoint Commands.
                                                              (line 125)
* -break-enable:                         GDB/MI Breakpoint Commands.
                                                              (line 161)
* -break-info:                           GDB/MI Breakpoint Commands.
                                                              (line 196)
* -break-insert:                         GDB/MI Breakpoint Commands.
                                                              (line 216)
* -break-list:                           GDB/MI Breakpoint Commands.
                                                              (line 314)
* -break-watch:                          GDB/MI Breakpoint Commands.
                                                              (line 389)
* -c:                                    File Options.        (line  43)
* -d:                                    File Options.        (line  66)
* -data-disassemble:                     GDB/MI Data Manipulation.
                                                              (line  12)
* -data-evaluate-expression:             GDB/MI Data Manipulation.
                                                              (line 140)
* -data-list-changed-registers:          GDB/MI Data Manipulation.
                                                              (line 178)
* -data-list-register-names:             GDB/MI Data Manipulation.
                                                              (line 213)
* -data-list-register-values:            GDB/MI Data Manipulation.
                                                              (line 253)
* -data-read-memory:                     GDB/MI Data Manipulation.
                                                              (line 343)
* -e:                                    File Options.        (line  35)
* -enable-timings:                       GDB/MI Miscellaneous Commands.
                                                              (line 235)
* -environment-cd:                       GDB/MI Program Context.
                                                              (line  50)
* -environment-directory:                GDB/MI Program Context.
                                                              (line  73)
* -environment-path:                     GDB/MI Program Context.
                                                              (line 117)
* -environment-pwd:                      GDB/MI Program Context.
                                                              (line 158)
* -ex:                                   File Options.        (line  56)
* -exec-abort:                           GDB/MI Miscellaneous Commands.
                                                              (line  31)
* -exec-arguments:                       GDB/MI Program Context.
                                                              (line   9)
* -exec-continue:                        GDB/MI Program Execution.
                                                              (line  13)
* -exec-finish:                          GDB/MI Program Execution.
                                                              (line  40)
* -exec-interrupt:                       GDB/MI Program Execution.
                                                              (line  81)
* -exec-next:                            GDB/MI Program Execution.
                                                              (line 121)
* -exec-next-instruction:                GDB/MI Program Execution.
                                                              (line 146)
* -exec-return:                          GDB/MI Program Execution.
                                                              (line 176)
* -exec-run:                             GDB/MI Program Execution.
                                                              (line 219)
* -exec-show-arguments:                  GDB/MI Program Context.
                                                              (line  30)
* -exec-step:                            GDB/MI Program Execution.
                                                              (line 279)
* -exec-step-instruction:                GDB/MI Program Execution.
                                                              (line 319)
* -exec-until:                           GDB/MI Program Execution.
                                                              (line 358)
* -f:                                    Mode Options.        (line  85)
* -file-exec-and-symbols:                GDB/MI File Commands.
                                                              (line  12)
* -file-exec-file:                       GDB/MI File Commands.
                                                              (line  40)
* -file-list-exec-sections:              GDB/MI File Commands.
                                                              (line  67)
* -file-list-exec-source-file:           GDB/MI File Commands.
                                                              (line  88)
* -file-list-exec-source-files:          GDB/MI File Commands.
                                                              (line 114)
* -file-list-shared-libraries:           GDB/MI File Commands.
                                                              (line 144)
* -file-list-symbol-files:               GDB/MI File Commands.
                                                              (line 164)
* -file-symbol-file:                     GDB/MI File Commands.
                                                              (line 184)
* -gdb-exit:                             GDB/MI Miscellaneous Commands.
                                                              (line   9)
* -gdb-set:                              GDB/MI Miscellaneous Commands.
                                                              (line  51)
* -gdb-show:                             GDB/MI Miscellaneous Commands.
                                                              (line  74)
* -gdb-version:                          GDB/MI Miscellaneous Commands.
                                                              (line  97)
* -inferior-tty-set:                     GDB/MI Miscellaneous Commands.
                                                              (line 186)
* -inferior-tty-show:                    GDB/MI Miscellaneous Commands.
                                                              (line 209)
* -interpreter-exec:                     GDB/MI Miscellaneous Commands.
                                                              (line 160)
* -l:                                    Mode Options.        (line 124)
* -list-features:                        GDB/MI Miscellaneous Commands.
                                                              (line 131)
* -n:                                    Mode Options.        (line  11)
* -nw:                                   Mode Options.        (line  70)
* -p:                                    File Options.        (line  47)
* -q:                                    Mode Options.        (line  19)
* -r:                                    File Options.        (line  70)
* -s:                                    File Options.        (line  31)
* -stack-info-depth:                     GDB/MI Stack Manipulation.
                                                              (line  35)
* -stack-info-frame:                     GDB/MI Stack Manipulation.
                                                              (line   9)
* -stack-list-arguments:                 GDB/MI Stack Manipulation.
                                                              (line  73)
* -stack-list-frames:                    GDB/MI Stack Manipulation.
                                                              (line 157)
* -stack-list-locals:                    GDB/MI Stack Manipulation.
                                                              (line 253)
* -stack-select-frame:                   GDB/MI Stack Manipulation.
                                                              (line 290)
* -symbol-info-address:                  GDB/MI Symbol Query. (line   9)
* -symbol-info-file:                     GDB/MI Symbol Query. (line  29)
* -symbol-info-function:                 GDB/MI Symbol Query. (line  49)
* -symbol-info-line:                     GDB/MI Symbol Query. (line  69)
* -symbol-info-symbol:                   GDB/MI Symbol Query. (line  90)
* -symbol-list-functions:                GDB/MI Symbol Query. (line 110)
* -symbol-list-lines:                    GDB/MI Symbol Query. (line 130)
* -symbol-list-types:                    GDB/MI Symbol Query. (line 155)
* -symbol-list-variables:                GDB/MI Symbol Query. (line 176)
* -symbol-locate:                        GDB/MI Symbol Query. (line 196)
* -symbol-type:                          GDB/MI Symbol Query. (line 214)
* -t:                                    Mode Options.        (line 129)
* -target-attach:                        GDB/MI Target Manipulation.
                                                              (line   9)
* -target-compare-sections:              GDB/MI Target Manipulation.
                                                              (line  29)
* -target-detach:                        GDB/MI Target Manipulation.
                                                              (line  50)
* -target-disconnect:                    GDB/MI Target Manipulation.
                                                              (line  74)
* -target-download:                      GDB/MI Target Manipulation.
                                                              (line  98)
* -target-exec-status:                   GDB/MI Target Manipulation.
                                                              (line 201)
* -target-file-delete:                   GDB/MI File Transfer Commands.
                                                              (line  57)
* -target-file-get:                      GDB/MI File Transfer Commands.
                                                              (line  33)
* -target-file-put:                      GDB/MI File Transfer Commands.
                                                              (line   9)
* -target-list-available-targets:        GDB/MI Target Manipulation.
                                                              (line 222)
* -target-list-current-targets:          GDB/MI Target Manipulation.
                                                              (line 242)
* -target-list-parameters:               GDB/MI Target Manipulation.
                                                              (line 263)
* -target-select:                        GDB/MI Target Manipulation.
                                                              (line 281)
* -thread-info:                          GDB/MI Thread Commands.
                                                              (line   9)
* -thread-list-all-threads:              GDB/MI Thread Commands.
                                                              (line  27)
* -thread-list-ids:                      GDB/MI Thread Commands.
                                                              (line  45)
* -thread-select:                        GDB/MI Thread Commands.
                                                              (line  79)
* -var-assign:                           GDB/MI Variable Objects.
                                                              (line 304)
* -var-create:                           GDB/MI Variable Objects.
                                                              (line  85)
* -var-delete:                           GDB/MI Variable Objects.
                                                              (line 126)
* -var-evaluate-expression:              GDB/MI Variable Objects.
                                                              (line 287)
* -var-info-expression:                  GDB/MI Variable Objects.
                                                              (line 228)
* -var-info-num-children:                GDB/MI Variable Objects.
                                                              (line 175)
* -var-info-path-expression:             GDB/MI Variable Objects.
                                                              (line 252)
* -var-info-type:                        GDB/MI Variable Objects.
                                                              (line 215)
* -var-list-children:                    GDB/MI Variable Objects.
                                                              (line 187)
* -var-set-format:                       GDB/MI Variable Objects.
                                                              (line 139)
* -var-set-frozen:                       GDB/MI Variable Objects.
                                                              (line 381)
* -var-show-attributes:                  GDB/MI Variable Objects.
                                                              (line 273)
* -var-show-format:                      GDB/MI Variable Objects.
                                                              (line 162)
* -var-update:                           GDB/MI Variable Objects.
                                                              (line 328)
* -w:                                    Mode Options.        (line  76)
* -x:                                    File Options.        (line  51)
* ., Modula-2 scope operator:            M2 Scope.            (line   6)
* .build-id directory:                   Separate Debug Files.
                                                              (line   6)
* .debug subdirectories:                 Separate Debug Files.
                                                              (line   6)
* .gdbinit:                              Startup.             (line  37)
* .gnu_debuglink sections:               Separate Debug Files.
                                                              (line  77)
* .note.gnu.build-id sections:           Separate Debug Files.
                                                              (line  95)
* .o files, reading symbols from:        Files.               (line 132)
* /proc:                                 SVR4 Process Information.
                                                              (line   6)
* <architecture>:                        Target Description Format.
                                                              (line  70)
* <feature>:                             Target Description Format.
                                                              (line  80)
* <reg>:                                 Target Description Format.
                                                              (line 127)
* <union>:                               Target Description Format.
                                                              (line 114)
* <vector>:                              Target Description Format.
                                                              (line 107)
* ? packet:                              Packets.             (line  35)
* @, referencing memory as an array:     Arrays.              (line   6)
* ^connected:                            GDB/MI Result Records.
                                                              (line  18)
* ^done:                                 GDB/MI Result Records.
                                                              (line   9)
* ^error:                                GDB/MI Result Records.
                                                              (line  21)
* ^exit:                                 GDB/MI Result Records.
                                                              (line  25)
* ^running:                              GDB/MI Result Records.
                                                              (line  14)
* _NSPrintForDebugger, and printing Objective-C objects: The Print Command with Objective-C.
                                                              (line  11)
* A packet:                              Packets.             (line  41)
* abbreviation:                          Command Syntax.      (line  13)
* abort (C-g):                           Miscellaneous Commands.
                                                              (line  10)
* accept-line (Newline or Return):       Commands For History.
                                                              (line   6)
* acknowledgment, for GDB remote:        Overview.            (line  33)
* actions:                               Tracepoint Actions.  (line   6)
* active targets:                        Active Targets.      (line   6)
* Ada:                                   Ada.                 (line   6)
* Ada exception catching:                Set Catchpoints.     (line  19)
* Ada mode, general:                     Ada Mode Intro.      (line   6)
* Ada, deviations from:                  Additions to Ada.    (line   6)
* Ada, omissions from:                   Omissions from Ada.  (line   6)
* Ada, problems:                         Ada Glitches.        (line   6)
* adbg_find_memory_in_frame:             Tracing on Symmetrix.
                                                              (line  17)
* add new commands for external monitor: Connecting.          (line 104)
* add-shared-symbol-files:               Files.               (line 172)
* add-symbol-file:                       Files.               (line 113)
* add-symbol-file-from-memory:           Files.               (line 162)
* address of a symbol:                   Symbols.             (line  44)
* address size for remote targets:       Remote Configuration.
                                                              (line  12)
* ADP (Angel Debugger Protocol) logging: ARM.                 (line  70)
* advance LOCATION:                      Continuing and Stepping.
                                                              (line 180)
* aggregates (Ada):                      Omissions from Ada.  (line  44)
* AIX threads:                           Debugging Output.    (line  28)
* alignment of remote memory accesses:   Packets.             (line 172)
* Alpha stack:                           MIPS.                (line   6)
* AMD 29K register stack:                A29K.                (line   6)
* annotations:                           Annotations Overview.
                                                              (line   6)
* annotations for errors, warnings and interrupts: Errors.    (line   6)
* annotations for invalidation messages: Invalidation.        (line   6)
* annotations for prompts:               Prompting.           (line   6)
* annotations for running programs:      Annotations for Running.
                                                              (line   6)
* annotations for source display:        Source Annotations.  (line   6)
* append:                                Dump/Restore Files.  (line  35)
* append data to a file:                 Dump/Restore Files.  (line   6)
* apply command to several threads:      Threads.             (line 146)
* apropos:                               Help.                (line  62)
* architecture debugging info:           Debugging Output.    (line  18)
* argument count in user-defined commands: Define.            (line  25)
* arguments (to your program):           Arguments.           (line   6)
* arguments, to gdbserver:               Server.              (line  34)
* arguments, to user-defined commands:   Define.              (line   6)
* ARM 32-bit mode:                       ARM.                 (line  25)
* ARM RDI:                               ARM.                 (line   6)
* array aggregates (Ada):                Omissions from Ada.  (line  44)
* arrays:                                Arrays.              (line   6)
* arrays in expressions:                 Expressions.         (line  14)
* artificial array:                      Arrays.              (line   6)
* ASCII character set:                   Character Sets.      (line  65)
* assembly instructions:                 Machine Code.        (line  35)
* assf:                                  Files.               (line 172)
* assignment:                            Assignment.          (line   6)
* async output in GDB/MI:                GDB/MI Output Syntax.
                                                              (line  96)
* AT&T disassembly flavor:               Machine Code.        (line  67)
* attach:                                Attach.              (line   6)
* attach to a program by name:           Server.              (line  79)
* automatic display:                     Auto Display.        (line   6)
* automatic hardware breakpoints:        Set Breaks.          (line 269)
* automatic overlay debugging:           Automatic Overlay Debugging.
                                                              (line   6)
* automatic thread selection:            Threads.             (line 169)
* auxiliary vector:                      OS Information.      (line  21)
* AVR:                                   AVR.                 (line   6)
* awatch:                                Set Watchpoints.     (line  51)
* b (break):                             Set Breaks.          (line   6)
* B packet:                              Packets.             (line  68)
* b packet:                              Packets.             (line  53)
* backtrace:                             Backtrace.           (line  11)
* backtrace beyond main function:        Backtrace.           (line  87)
* backtrace limit:                       Backtrace.           (line 123)
* backward-char (C-b):                   Commands For Moving. (line  15)
* backward-delete-char (Rubout):         Commands For Text.   (line  11)
* backward-kill-line (C-x Rubout):       Commands For Killing.
                                                              (line   9)
* backward-kill-word (M-<DEL>):          Commands For Killing.
                                                              (line  24)
* backward-word (M-b):                   Commands For Moving. (line  22)
* baud rate for remote targets:          Remote Configuration.
                                                              (line  21)
* bcache statistics:                     Maintenance Commands.
                                                              (line 166)
* beginning-of-history (M-<):            Commands For History.
                                                              (line  19)
* beginning-of-line (C-a):               Commands For Moving. (line   6)
* bell-style:                            Readline Init File Syntax.
                                                              (line  35)
* bind-tty-special-chars:                Readline Init File Syntax.
                                                              (line  42)
* bits in remote address:                Remote Configuration.
                                                              (line  12)
* bookmark:                              Checkpoint/Restart.  (line   6)
* break:                                 Set Breaks.          (line   6)
* break ... thread THREADNO:             Thread Stops.        (line  10)
* break in overloaded functions:         Debugging C Plus Plus.
                                                              (line   9)
* break on fork/exec:                    Set Catchpoints.     (line  33)
* break on load/unload of shared library: Set Catchpoints.    (line  46)
* BREAK signal instead of Ctrl-C:        Remote Configuration.
                                                              (line  29)
* break, and Objective-C:                Method Names in Commands.
                                                              (line   9)
* breakpoint address adjusted:           Breakpoint-related Warnings.
                                                              (line   6)
* breakpoint annotation:                 Annotations for Running.
                                                              (line  47)
* breakpoint commands:                   Break Commands.      (line   6)
* breakpoint commands for GDB/MI:        GDB/MI Breakpoint Commands.
                                                              (line   6)
* breakpoint conditions:                 Conditions.          (line   6)
* breakpoint numbers:                    Breakpoints.         (line  41)
* breakpoint on events:                  Breakpoints.         (line  33)
* breakpoint on memory address:          Breakpoints.         (line  20)
* breakpoint on variable modification:   Breakpoints.         (line  20)
* breakpoint ranges:                     Breakpoints.         (line  48)
* breakpoint subroutine, remote:         Stub Contents.       (line  31)
* breakpointing Ada elaboration code:    Stopping Before Main Program.
                                                              (line   6)
* breakpoints:                           Breakpoints.         (line   6)
* breakpoints and threads:               Thread Stops.        (line  10)
* breakpoints in functions matching a regexp: Set Breaks.     (line  87)
* breakpoints in overlays:               Overlay Commands.    (line  93)
* breakpoints-invalid annotation:        Invalidation.        (line  13)
* bt (backtrace):                        Backtrace.           (line  11)
* bug criteria:                          Bug Criteria.        (line   6)
* bug reports:                           Bug Reporting.       (line   6)
* bugs in GDB:                           GDB Bugs.            (line   6)
* build ID sections:                     Separate Debug Files.
                                                              (line  95)
* build ID, and separate debugging files: Separate Debug Files.
                                                              (line   6)
* building GDB, requirements for:        Requirements.        (line   6)
* built-in simulator target:             Target Commands.     (line  73)
* c (continue):                          Continuing and Stepping.
                                                              (line  15)
* c (SingleKey TUI key):                 TUI Single Key Mode. (line  10)
* C and C++:                             C.                   (line   6)
* C and C++ checks:                      C Checks.            (line   6)
* C and C++ constants:                   C Constants.         (line   6)
* C and C++ defaults:                    C Defaults.          (line   6)
* C and C++ operators:                   C Operators.         (line   6)
* C packet:                              Packets.             (line  80)
* c packet:                              Packets.             (line  74)
* C++:                                   C.                   (line  10)
* C++ compilers:                         C Plus Plus Expressions.
                                                              (line   8)
* C++ exception handling:                Debugging C Plus Plus.
                                                              (line  19)
* C++ overload debugging info:           Debugging Output.    (line  80)
* C++ scope resolution:                  Variables.           (line  54)
* C++ symbol decoding style:             Print Settings.      (line 294)
* C++ symbol display:                    Debugging C Plus Plus.
                                                              (line  28)
* C-L:                                   TUI Keys.            (line  65)
* C-x 1:                                 TUI Keys.            (line  19)
* C-x 2:                                 TUI Keys.            (line  26)
* C-x A:                                 TUI Keys.            (line  12)
* C-x a:                                 TUI Keys.            (line  11)
* C-x C-a:                               TUI Keys.            (line  10)
* C-x o:                                 TUI Keys.            (line  34)
* C-x s:                                 TUI Keys.            (line  41)
* caching data of remote targets:        Caching Remote Data. (line   6)
* call:                                  Calling.             (line  10)
* call dummy stack unwinding:            Calling.             (line  26)
* call overloaded functions:             C Plus Plus Expressions.
                                                              (line  27)
* call stack:                            Stack.               (line   9)
* call stack traces:                     Backtrace.           (line   6)
* call-last-kbd-macro (C-x e):           Keyboard Macros.     (line  13)
* calling functions:                     Calling.             (line   6)
* calling make:                          Shell Commands.      (line  19)
* capitalize-word (M-c):                 Commands For Text.   (line  49)
* case sensitivity in symbol names:      Symbols.             (line  27)
* case-insensitive symbol names:         Symbols.             (line  27)
* casts, in expressions:                 Expressions.         (line  27)
* casts, to view memory:                 Expressions.         (line  42)
* catch:                                 Set Catchpoints.     (line  10)
* catch Ada exceptions:                  Set Catchpoints.     (line  19)
* catch exceptions, list active handlers: Frame Info.         (line  60)
* catchpoints:                           Breakpoints.         (line  33)
* catchpoints, setting:                  Set Catchpoints.     (line   6)
* cd:                                    Working Directory.   (line  16)
* cdir:                                  Source Path.         (line  99)
* Cell Broadband Engine:                 SPU.                 (line   6)
* change working directory:              Working Directory.   (line  16)
* character sets:                        Character Sets.      (line   6)
* character-search (C-]):                Miscellaneous Commands.
                                                              (line  41)
* character-search-backward (M-C-]):     Miscellaneous Commands.
                                                              (line  46)
* charset:                               Character Sets.      (line   6)
* checkpoint:                            Checkpoint/Restart.  (line   6)
* checkpoints and process id:            Checkpoint/Restart.  (line  80)
* checks, range:                         Type Checking.       (line  65)
* checks, type:                          Checks.              (line  31)
* checksum, for GDB remote:              Overview.            (line  20)
* choosing target byte order:            Byte Order.          (line   6)
* clear:                                 Delete Breaks.       (line  21)
* clear, and Objective-C:                Method Names in Commands.
                                                              (line   9)
* clear-screen (C-l):                    Commands For Moving. (line  26)
* clearing breakpoints, watchpoints, catchpoints: Delete Breaks.
                                                              (line   6)
* close, file-i/o system call:           close.               (line   6)
* closest symbol and offset for an address: Symbols.          (line  54)
* code address and its source line:      Machine Code.        (line  24)
* collect (tracepoints):                 Tracepoint Actions.  (line  45)
* collected data discarded:              Starting and Stopping Trace Experiments.
                                                              (line   6)
* colon, doubled as scope operator:      M2 Scope.            (line   6)
* colon-colon, context for variables/functions: Variables.    (line  44)
* colon-colon, in Modula-2:              M2 Scope.            (line   6)
* command editing:                       Readline Bare Essentials.
                                                              (line   6)
* command files:                         Command Files.       (line   6)
* command history:                       Command History.     (line   6)
* command hooks:                         Hooks.               (line   6)
* command interpreters:                  Interpreters.        (line   6)
* command line editing:                  Editing.             (line   6)
* command scripts, debugging:            Messages/Warnings.   (line  65)
* command tracing:                       Messages/Warnings.   (line  60)
* commands:                              Break Commands.      (line  11)
* commands annotation:                   Prompting.           (line  27)
* commands for C++:                      Debugging C Plus Plus.
                                                              (line   6)
* comment:                               Command Syntax.      (line  38)
* comment-begin:                         Readline Init File Syntax.
                                                              (line  47)
* COMMON blocks, Fortran:                Special Fortran Commands.
                                                              (line   9)
* common targets:                        Target Commands.     (line  46)
* compare-sections:                      Memory.              (line 111)
* compatibility, GDB/MI and CLI:         GDB/MI Compatibility with CLI.
                                                              (line   6)
* compilation directory:                 Source Path.         (line  99)
* compiling, on Sparclet:                Sparclet.            (line  16)
* complete:                              Help.                (line  76)
* complete (<TAB>):                      Commands For Completion.
                                                              (line   6)
* completion:                            Completion.          (line   6)
* completion of quoted strings:          Completion.          (line  57)
* completion-query-items:                Readline Init File Syntax.
                                                              (line  57)
* condition:                             Conditions.          (line  45)
* conditional breakpoints:               Conditions.          (line   6)
* configuring GDB:                       Running Configure.   (line   6)
* confirmation:                          Messages/Warnings.   (line  50)
* console i/o as part of file-i/o:       Console I/O.         (line   6)
* console interpreter:                   Interpreters.        (line  21)
* console output in GDB/MI:              GDB/MI Output Syntax.
                                                              (line 104)
* constants, in file-i/o protocol:       Constants.           (line   6)
* continue:                              Continuing and Stepping.
                                                              (line  15)
* continuing:                            Continuing and Stepping.
                                                              (line   6)
* continuing threads:                    Thread Stops.        (line  70)
* control C, and remote debugging:       Bootstrapping.       (line  25)
* controlling terminal:                  Input/Output.        (line  23)
* convenience variables:                 Convenience Vars.    (line   6)
* convenience variables for tracepoints: Tracepoint Variables.
                                                              (line   6)
* convenience variables, initializing:   Convenience Vars.    (line  41)
* convert-meta:                          Readline Init File Syntax.
                                                              (line  67)
* copy-backward-word ():                 Commands For Killing.
                                                              (line  49)
* copy-forward-word ():                  Commands For Killing.
                                                              (line  54)
* copy-region-as-kill ():                Commands For Killing.
                                                              (line  45)
* core dump file:                        Files.               (line   6)
* core dump file target:                 Target Commands.     (line  54)
* core-file:                             Files.               (line  97)
* crash of debugger:                     Bug Criteria.        (line   9)
* CRC of memory block, remote request:   General Query Packets.
                                                              (line  51)
* CRIS:                                  CRIS.                (line   6)
* CRIS mode:                             CRIS.                (line  26)
* CRIS version:                          CRIS.                (line  10)
* ctrl-c message, in file-i/o protocol:  The Ctrl-C Message.  (line   6)
* Ctrl-o (operate-and-get-next):         Command Syntax.      (line  42)
* current directory:                     Source Path.         (line  99)
* current stack frame:                   Frames.              (line  45)
* current thread:                        Threads.             (line  41)
* current thread, remote request:        General Query Packets.
                                                              (line  41)
* cwd:                                   Source Path.         (line  99)
* Cygwin DLL, debugging:                 Cygwin Native.       (line  30)
* Cygwin-specific commands:              Cygwin Native.       (line   6)
* d (delete):                            Delete Breaks.       (line  41)
* d (SingleKey TUI key):                 TUI Single Key Mode. (line  13)
* D packet:                              Packets.             (line  92)
* d packet:                              Packets.             (line  86)
* data breakpoints:                      Breakpoints.         (line  20)
* data manipulation, in GDB/MI:          GDB/MI Data Manipulation.
                                                              (line   6)
* dead names, GNU Hurd:                  Hurd Native.         (line  85)
* debug formats and C++:                 C Plus Plus Expressions.
                                                              (line   8)
* debug link sections:                   Separate Debug Files.
                                                              (line  77)
* debug remote protocol:                 Debugging Output.    (line  86)
* debug_chaos:                           M32R/D.              (line  50)
* debugger crash:                        Bug Criteria.        (line   9)
* debugging C++ programs:                C Plus Plus Expressions.
                                                              (line   8)
* debugging information directory, global: Separate Debug Files.
                                                              (line   6)
* debugging information in separate files: Separate Debug Files.
                                                              (line   6)
* debugging multiple processes:          Processes.           (line  52)
* debugging multithreaded programs (on HP-UX): Threads.       (line  85)
* debugging optimized code:              Compilation.         (line  26)
* debugging stub, example:               Remote Stub.         (line   6)
* debugging target:                      Targets.             (line   6)
* debugging the Cygwin DLL:              Cygwin Native.       (line  30)
* decimal floating point format:         Decimal Floating Point.
                                                              (line   6)
* default system root:                   Files.               (line 381)
* define:                                Define.              (line  37)
* defining macros interactively:         Macros.              (line  54)
* definition, showing a macro's:         Macros.              (line  50)
* delete:                                Delete Breaks.       (line  41)
* delete breakpoints:                    Delete Breaks.       (line  41)
* delete checkpoint CHECKPOINT-ID:       Checkpoint/Restart.  (line  56)
* delete display:                        Auto Display.        (line  45)
* delete fork FORK-ID:                   Processes.           (line 105)
* delete mem:                            Memory Region Attributes.
                                                              (line  34)
* delete tracepoint:                     Create and Delete Tracepoints.
                                                              (line  34)
* delete-char (C-d):                     Commands For Text.   (line   6)
* delete-char-or-list ():                Commands For Completion.
                                                              (line  30)
* delete-horizontal-space ():            Commands For Killing.
                                                              (line  37)
* deleting breakpoints, watchpoints, catchpoints: Delete Breaks.
                                                              (line   6)
* deliver a signal to a program:         Signaling.           (line   6)
* demangling C++ names:                  Print Settings.      (line 275)
* deprecated commands:                   Maintenance Commands.
                                                              (line  60)
* derived type of an object, printing:   Print Settings.      (line 327)
* descriptor tables display:             DJGPP Native.        (line  24)
* detach:                                Attach.              (line  36)
* detach (remote):                       Connecting.          (line  90)
* detach fork FORK-ID:                   Processes.           (line 100)
* detach from task, GNU Hurd:            Hurd Native.         (line  60)
* detach from thread, GNU Hurd:          Hurd Native.         (line 110)
* digit-argument (M-0, M-1, ... M--):    Numeric Arguments.   (line   6)
* dir:                                   Source Path.         (line  39)
* direct memory access (DMA) on MS-DOS:  DJGPP Native.        (line  75)
* directories for source files:          Source Path.         (line   6)
* directory:                             Source Path.         (line  39)
* directory, compilation:                Source Path.         (line  99)
* directory, current:                    Source Path.         (line  99)
* dis (disable):                         Disabling.           (line  38)
* disable:                               Disabling.           (line  38)
* disable display:                       Auto Display.        (line  52)
* disable mem:                           Memory Region Attributes.
                                                              (line  38)
* disable tracepoint:                    Enable and Disable Tracepoints.
                                                              (line   6)
* disable-completion:                    Readline Init File Syntax.
                                                              (line  73)
* disassemble:                           Machine Code.        (line  35)
* disconnect:                            Connecting.          (line  97)
* display:                               Auto Display.        (line  23)
* display command history:               Command History.     (line  78)
* display derived types:                 Print Settings.      (line 327)
* display disabled out of scope:         Auto Display.        (line  74)
* display GDB copyright:                 Help.                (line 136)
* display of expressions:                Auto Display.        (line   6)
* display remote monitor communications: Target Commands.     (line 108)
* display remote packets:                Debugging Output.    (line  86)
* DJGPP debugging:                       DJGPP Native.        (line   6)
* dll-symbols:                           Cygwin Native.       (line  26)
* DLLs with no debugging symbols:        Non-debug DLL Symbols.
                                                              (line   6)
* do (down):                             Selection.           (line  40)
* do not print frame argument values:    Print Settings.      (line 135)
* do-uppercase-version (M-a, M-b, M-X, ...): Miscellaneous Commands.
                                                              (line  14)
* document:                              Define.              (line  46)
* documentation:                         Formatting Documentation.
                                                              (line  22)
* don't repeat command:                  Define.              (line  58)
* dont-repeat:                           Define.              (line  58)
* DOS serial data link, remote debugging: DJGPP Native.       (line 121)
* DOS serial port status:                DJGPP Native.        (line 142)
* Down:                                  TUI Keys.            (line  56)
* down:                                  Selection.           (line  40)
* down-silently:                         Selection.           (line  64)
* downcase-word (M-l):                   Commands For Text.   (line  45)
* download server address (M32R):        M32R/D.              (line  27)
* download to Sparclet:                  Sparclet Download.   (line   6)
* download to VxWorks:                   VxWorks Download.    (line   6)
* DPMI:                                  DJGPP Native.        (line   6)
* dump:                                  Dump/Restore Files.  (line  13)
* dump all data collected at tracepoint: tdump.               (line   6)
* dump core from inferior:               Core File Generation.
                                                              (line   6)
* dump data to a file:                   Dump/Restore Files.  (line   6)
* dump-functions ():                     Miscellaneous Commands.
                                                              (line  61)
* dump-macros ():                        Miscellaneous Commands.
                                                              (line  73)
* dump-variables ():                     Miscellaneous Commands.
                                                              (line  67)
* dump/restore files:                    Dump/Restore Files.  (line   6)
* DWARF 2 compilation units cache:       Maintenance Commands.
                                                              (line 202)
* DWARF-2 CFI and CRIS:                  CRIS.                (line  18)
* dynamic linking:                       Files.               (line 113)
* e (edit):                              Edit.                (line   6)
* EBCDIC character set:                  Character Sets.      (line  74)
* echo:                                  Output.              (line  12)
* edit:                                  Edit.                (line   6)
* editing:                               Editing.             (line  15)
* editing command lines:                 Readline Bare Essentials.
                                                              (line   6)
* editing source files:                  Edit.                (line   6)
* editing-mode:                          Readline Init File Syntax.
                                                              (line  78)
* eight-bit characters in strings:       Print Settings.      (line 220)
* elaboration phase:                     Starting.            (line  82)
* else:                                  Command Files.       (line  56)
* Emacs:                                 Emacs.               (line   6)
* empty response, for unsupported packets: Overview.          (line  90)
* enable:                                Disabling.           (line  45)
* enable display:                        Auto Display.        (line  57)
* enable mem:                            Memory Region Attributes.
                                                              (line  42)
* enable tracepoint:                     Enable and Disable Tracepoints.
                                                              (line  12)
* enable-keypad:                         Readline Init File Syntax.
                                                              (line  84)
* enable/disable a breakpoint:           Disabling.           (line   6)
* end (breakpoint commands):             Break Commands.      (line  11)
* end (if/else/while commands):          Command Files.       (line  85)
* end (user-defined commands):           Define.              (line  46)
* end-kbd-macro (C-x )):                 Keyboard Macros.     (line   9)
* end-of-history (M->):                  Commands For History.
                                                              (line  22)
* end-of-line (C-e):                     Commands For Moving. (line   9)
* entering numbers:                      Numbers.             (line   6)
* environment (of your program):         Environment.         (line   6)
* errno values, in file-i/o protocol:    Errno Values.        (line   6)
* error annotation:                      Errors.              (line  10)
* error on valid input:                  Bug Criteria.        (line  12)
* error-begin annotation:                Errors.              (line  22)
* event debugging info:                  Debugging Output.    (line  35)
* event designators:                     Event Designators.   (line   6)
* event handling:                        Set Catchpoints.     (line   6)
* examine process image:                 SVR4 Process Information.
                                                              (line   6)
* examining data:                        Data.                (line   6)
* examining memory:                      Memory.              (line   9)
* exception handlers:                    Set Catchpoints.     (line   6)
* exception handlers, how to list:       Frame Info.          (line  60)
* exceptionHandler:                      Bootstrapping.       (line  38)
* exchange-point-and-mark (C-x C-x):     Miscellaneous Commands.
                                                              (line  36)
* exec-file:                             Files.               (line  39)
* executable file:                       Files.               (line  16)
* executable file target:                Target Commands.     (line  50)
* executable file, for remote target:    Remote Configuration.
                                                              (line  79)
* execute commands from a file:          Command Files.       (line  14)
* execute remote command, remote request: General Query Packets.
                                                              (line 203)
* exited annotation:                     Annotations for Running.
                                                              (line  18)
* exiting GDB:                           Quitting GDB.        (line   6)
* expand macro once:                     Macros.              (line  41)
* expand-tilde:                          Readline Init File Syntax.
                                                              (line  89)
* expanding preprocessor macros:         Macros.              (line  32)
* expression debugging info:             Debugging Output.    (line  42)
* expressions:                           Expressions.         (line   6)
* expressions in Ada:                    Ada.                 (line  11)
* expressions in C or C++:               C.                   (line   6)
* expressions in C++:                    C Plus Plus Expressions.
                                                              (line   6)
* expressions in Modula-2:               Modula-2.            (line  12)
* extend GDB for remote targets:         Connecting.          (line 104)
* f (frame):                             Selection.           (line  11)
* f (SingleKey TUI key):                 TUI Single Key Mode. (line  16)
* F packet:                              Packets.             (line 103)
* F reply packet:                        The F Reply Packet.  (line   6)
* F request packet:                      The F Request Packet.
                                                              (line   6)
* fatal signal:                          Bug Criteria.        (line   9)
* fatal signals:                         Signals.             (line  15)
* FDL, GNU Free Documentation License:   GNU Free Documentation License.
                                                              (line   6)
* features of the remote protocol:       General Query Packets.
                                                              (line 228)
* fg (resume foreground execution):      Continuing and Stepping.
                                                              (line  15)
* file:                                  Files.               (line  16)
* file transfer:                         File Transfer.       (line   6)
* file transfer, remote protocol:        Host I/O Packets.    (line   6)
* file-i/o examples:                     File-I/O Examples.   (line   6)
* file-i/o overview:                     File-I/O Overview.   (line   6)
* File-I/O remote protocol extension:    File-I/O Remote Protocol Extension.
                                                              (line   6)
* file-i/o reply packet:                 The F Reply Packet.  (line   6)
* file-i/o request packet:               The F Request Packet.
                                                              (line   6)
* find downloadable SREC files (M32R):   M32R/D.              (line  15)
* find trace snapshot:                   tfind.               (line   6)
* finish:                                Continuing and Stepping.
                                                              (line 110)
* flinching:                             Messages/Warnings.   (line  50)
* float promotion:                       ABI.                 (line  29)
* floating point:                        Floating Point Hardware.
                                                              (line   6)
* floating point registers:              Registers.           (line  15)
* floating point, MIPS remote:           MIPS Embedded.       (line  60)
* flush_i_cache:                         Bootstrapping.       (line  60)
* flushregs:                             Maintenance Commands.
                                                              (line 158)
* focus:                                 TUI Commands.        (line  34)
* focus of debugging:                    Threads.             (line  41)
* foo:                                   Symbol Errors.       (line  50)
* fork FORK-ID:                          Processes.           (line  85)
* fork, debugging programs which call:   Processes.           (line   6)
* format options:                        Print Settings.      (line   6)
* formatted output:                      Output Formats.      (line   6)
* Fortran:                               Summary.             (line  35)
* Fortran Defaults:                      Fortran Defaults.    (line   6)
* Fortran operators and expressions:     Fortran Operators.   (line   6)
* Fortran-specific support in GDB:       Fortran.             (line   6)
* forward-backward-delete-char ():       Commands For Text.   (line  15)
* forward-char (C-f):                    Commands For Moving. (line  12)
* forward-search:                        Search.              (line   9)
* forward-search-history (C-s):          Commands For History.
                                                              (line  30)
* forward-word (M-f):                    Commands For Moving. (line  18)
* FR-V shared-library debugging:         Debugging Output.    (line 104)
* frame debugging info:                  Debugging Output.    (line  50)
* frame number:                          Frames.              (line  28)
* frame pointer:                         Frames.              (line  21)
* frame pointer register:                Registers.           (line  26)
* frame, command:                        Frames.              (line  45)
* frame, definition:                     Frames.              (line   6)
* frame, selecting:                      Selection.           (line  11)
* frameless execution:                   Frames.              (line  34)
* frames-invalid annotation:             Invalidation.        (line   9)
* free memory information (MS-DOS):      DJGPP Native.        (line  19)
* fstat, file-i/o system call:           stat/fstat.          (line   6)
* Fujitsu:                               Remote Stub.         (line  69)
* full symbol tables, listing GDB's internal: Symbols.        (line 270)
* function call arguments, optimized out: Backtrace.          (line  65)
* function entry/exit, wrong values of variables: Variables.  (line  58)
* functions without line info, and stepping: Continuing and Stepping.
                                                              (line  93)
* G packet:                              Packets.             (line 124)
* g packet:                              Packets.             (line 108)
* g++, GNU C++ compiler:                 C.                   (line  10)
* garbled pointers:                      DJGPP Native.        (line  42)
* GCC and C++:                           C Plus Plus Expressions.
                                                              (line   8)
* gcore:                                 Core File Generation.
                                                              (line  18)
* GDB bugs, reporting:                   Bug Reporting.       (line   6)
* GDB reference card:                    Formatting Documentation.
                                                              (line   6)
* GDB startup:                           Startup.             (line   6)
* GDB version number:                    Help.                (line 126)
* gdb.ini:                               Startup.             (line  37)
* GDB/MI development:                    GDB/MI Development and Front Ends.
                                                              (line   6)
* GDB/MI, breakpoint commands:           GDB/MI Breakpoint Commands.
                                                              (line   6)
* GDB/MI, compatibility with CLI:        GDB/MI Compatibility with CLI.
                                                              (line   6)
* GDB/MI, data manipulation:             GDB/MI Data Manipulation.
                                                              (line   6)
* GDB/MI, input syntax:                  GDB/MI Input Syntax. (line   6)
* GDB/MI, its purpose:                   GDB/MI.              (line   9)
* GDB/MI, out-of-band records:           GDB/MI Out-of-band Records.
                                                              (line   6)
* GDB/MI, output syntax:                 GDB/MI Output Syntax.
                                                              (line   6)
* GDB/MI, result records:                GDB/MI Result Records.
                                                              (line   6)
* GDB/MI, simple examples:               GDB/MI Simple Examples.
                                                              (line   6)
* GDB/MI, stream records:                GDB/MI Stream Records.
                                                              (line   6)
* gdbarch debugging info:                Debugging Output.    (line  18)
* GDBHISTFILE, environment variable:     Command History.     (line  26)
* gdbserver:                             Server.              (line   6)
* gdbserver, multiple processes:         Server.              (line  91)
* GDT:                                   DJGPP Native.        (line  24)
* generate-core-file:                    Core File Generation.
                                                              (line  18)
* get thread-local storage address, remote request: General Query Packets.
                                                              (line  87)
* getDebugChar:                          Bootstrapping.       (line  14)
* gettimeofday, file-i/o system call:    gettimeofday.        (line   6)
* global debugging information directory: Separate Debug Files.
                                                              (line   6)
* GNU C++:                               C.                   (line  10)
* GNU Emacs:                             Emacs.               (line   6)
* GNU Hurd debugging:                    Hurd Native.         (line   6)
* GNU/Linux LWP debug messages:          Debugging Output.    (line  66)
* gnu_debuglink_crc32:                   Separate Debug Files.
                                                              (line 144)
* h (help):                              Help.                (line   9)
* H packet:                              Packets.             (line 135)
* handle:                                Signals.             (line  45)
* handle_exception:                      Stub Contents.       (line  15)
* handling signals:                      Signals.             (line  27)
* hardware breakpoints:                  Set Breaks.          (line  57)
* hardware watchpoints:                  Set Watchpoints.     (line  22)
* hash mark while downloading:           Target Commands.     (line  99)
* hbreak:                                Set Breaks.          (line  57)
* help:                                  Help.                (line   6)
* help target:                           Target Commands.     (line  19)
* help user-defined:                     Define.              (line  63)
* heuristic-fence-post (Alpha, MIPS):    MIPS.                (line  14)
* history events:                        Event Designators.   (line   7)
* history expansion:                     History Interaction. (line   6)
* history expansion, turn on/off:        Command History.     (line  53)
* history file:                          Command History.     (line  26)
* history number:                        Value History.       (line  13)
* history of values printed by GDB:      Value History.       (line   6)
* history size:                          Command History.     (line  45)
* history substitution:                  Command History.     (line  26)
* history-preserve-point:                Readline Init File Syntax.
                                                              (line  93)
* history-search-backward ():            Commands For History.
                                                              (line  50)
* history-search-forward ():             Commands For History.
                                                              (line  45)
* HISTSIZE, environment variable:        Command History.     (line  45)
* hook:                                  Hooks.               (line   6)
* hookpost:                              Hooks.               (line  11)
* hooks, for commands:                   Hooks.               (line   6)
* hooks, post-command:                   Hooks.               (line  11)
* hooks, pre-command:                    Hooks.               (line   6)
* horizontal-scroll-mode:                Readline Init File Syntax.
                                                              (line  98)
* host character set:                    Character Sets.      (line   6)
* Host I/O, remote protocol:             Host I/O Packets.    (line   6)
* how many arguments (user-defined commands): Define.         (line  25)
* HPPA support:                          HPPA.                (line   6)
* htrace:                                OpenRISC 1000.       (line  69)
* hwatch:                                OpenRISC 1000.       (line  59)
* i (info):                              Help.                (line  99)
* I packet:                              Packets.             (line 154)
* i packet:                              Packets.             (line 149)
* i/o:                                   Input/Output.        (line   6)
* I/O registers (Atmel AVR):             AVR.                 (line  10)
* i386:                                  Remote Stub.         (line  57)
* i386-stub.c:                           Remote Stub.         (line  57)
* IBM1047 character set:                 Character Sets.      (line  74)
* IDT:                                   DJGPP Native.        (line  24)
* if:                                    Command Files.       (line  56)
* ignore:                                Conditions.          (line  77)
* ignore count (of breakpoint):          Conditions.          (line  66)
* INCLUDE_RDB:                           VxWorks.             (line  33)
* incomplete type:                       Symbols.             (line  99)
* indentation in structure display:      Print Settings.      (line 196)
* inferior debugging info:               Debugging Output.    (line  57)
* inferior functions, calling:           Calling.             (line   6)
* inferior tty:                          Input/Output.        (line  44)
* infinite recursion in user-defined commands: Define.        (line  73)
* info:                                  Help.                (line  99)
* info address:                          Symbols.             (line  44)
* info all-registers:                    Registers.           (line  15)
* info args:                             Frame Info.          (line  51)
* info auxv:                             OS Information.      (line  33)
* info breakpoints:                      Set Breaks.          (line 112)
* info catch:                            Frame Info.          (line  60)
* info checkpoints:                      Checkpoint/Restart.  (line  31)
* info classes:                          Symbols.             (line 197)
* info common:                           Special Fortran Commands.
                                                              (line   9)
* info copying:                          Help.                (line 136)
* info dcache:                           Caching Remote Data. (line  22)
* info display:                          Auto Display.        (line  66)
* info dll:                              Cygwin Native.       (line  23)
* info dos:                              DJGPP Native.        (line  15)
* info extensions:                       Show.                (line  34)
* info f (info frame):                   Frame Info.          (line  17)
* info files:                            Files.               (line 191)
* info float:                            Floating Point Hardware.
                                                              (line   9)
* info for known object files:           Maintenance Commands.
                                                              (line 161)
* info forks:                            Processes.           (line  80)
* info frame:                            Frame Info.          (line  17)
* info frame, show the source language:  Show.                (line  15)
* info functions:                        Symbols.             (line 176)
* info handle:                           Signals.             (line  33)
* info io_registers, AVR:                AVR.                 (line  10)
* info line:                             Machine Code.        (line  13)
* info line, and Objective-C:            Method Names in Commands.
                                                              (line   9)
* info locals:                           Frame Info.          (line  55)
* info macro:                            Macros.              (line  50)
* info mem:                              Memory Region Attributes.
                                                              (line  45)
* info meminfo:                          SVR4 Process Information.
                                                              (line  78)
* info or1k spr:                         OpenRISC 1000.       (line  20)
* info pidlist:                          SVR4 Process Information.
                                                              (line  74)
* info proc:                             SVR4 Process Information.
                                                              (line  16)
* info program:                          Stopping.            (line  18)
* info registers:                        Registers.           (line  11)
* info scope:                            Symbols.             (line 130)
* info selectors:                        Symbols.             (line 203)
* info serial:                           DJGPP Native.        (line 142)
* info set:                              Help.                (line 119)
* info share:                            Files.               (line 326)
* info sharedlibrary:                    Files.               (line 326)
* info signals:                          Signals.             (line  33)
* info source:                           Symbols.             (line 151)
* info source, show the source language: Show.                (line  21)
* info sources:                          Symbols.             (line 170)
* info spu:                              SPU.                 (line  10)
* info stack:                            Backtrace.           (line  34)
* info symbol:                           Symbols.             (line  54)
* info target:                           Files.               (line 191)
* info terminal:                         Input/Output.        (line  12)
* info threads:                          Threads.             (line  62)
* info threads (HP-UX):                  Threads.             (line  99)
* info tp:                               Listing Tracepoints. (line   6)
* info tracepoints:                      Listing Tracepoints. (line   6)
* info types:                            Symbols.             (line 116)
* info udot:                             OS Information.      (line  16)
* info variables:                        Symbols.             (line 188)
* info vector:                           Vector Unit.         (line   9)
* info w32:                              Cygwin Native.       (line  12)
* info warranty:                         Help.                (line 140)
* info watchpoints [N]:                  Set Watchpoints.     (line  55)
* info win:                              TUI Commands.        (line  12)
* information about tracepoints:         Listing Tracepoints. (line   6)
* inheritance:                           Debugging C Plus Plus.
                                                              (line  24)
* init file:                             Startup.             (line  11)
* init file name:                        Startup.             (line  37)
* init-if-undefined:                     Convenience Vars.    (line  41)
* initial frame:                         Frames.              (line  12)
* initialization file, readline:         Readline Init File.  (line   6)
* innermost frame:                       Frames.              (line  12)
* input syntax for GDB/MI:               GDB/MI Input Syntax. (line   6)
* input-meta:                            Readline Init File Syntax.
                                                              (line 105)
* insert-comment (M-#):                  Miscellaneous Commands.
                                                              (line  51)
* insert-completions (M-*):              Commands For Completion.
                                                              (line  14)
* inspect:                               Data.                (line   6)
* installation:                          Installing GDB.      (line   6)
* instructions, assembly:                Machine Code.        (line  35)
* integral datatypes, in file-i/o protocol: Integral Datatypes.
                                                              (line   6)
* Intel:                                 Remote Stub.         (line  57)
* Intel disassembly flavor:              Machine Code.        (line  67)
* interaction, readline:                 Readline Interaction.
                                                              (line   6)
* internal commands:                     Maintenance Commands.
                                                              (line   6)
* internal GDB breakpoints:              Set Breaks.          (line 289)
* interpreter-exec:                      Interpreters.        (line  43)
* interrupt:                             Quitting GDB.        (line  13)
* interrupt remote programs:             Remote Configuration.
                                                              (line  29)
* interrupting remote programs:          Connecting.          (line  77)
* interrupting remote targets:           Bootstrapping.       (line  25)
* interrupts (remote protocol):          Interrupts.          (line   6)
* invalid input:                         Bug Criteria.        (line  16)
* invoke another interpreter:            Interpreters.        (line  37)
* isatty, file-i/o system call:          isatty.              (line   6)
* isearch-terminators:                   Readline Init File Syntax.
                                                              (line 112)
* ISO 8859-1 character set:              Character Sets.      (line  68)
* ISO Latin 1 character set:             Character Sets.      (line  68)
* jump:                                  Jumping.             (line  10)
* jump, and Objective-C:                 Method Names in Commands.
                                                              (line   9)
* k packet:                              Packets.             (line 158)
* kernel crash dump:                     BSD libkvm Interface.
                                                              (line   6)
* kernel memory image:                   BSD libkvm Interface.
                                                              (line   6)
* keymap:                                Readline Init File Syntax.
                                                              (line 119)
* kill:                                  Kill Process.        (line   6)
* kill ring:                             Readline Killing Commands.
                                                              (line  19)
* kill-line (C-k):                       Commands For Killing.
                                                              (line   6)
* kill-region ():                        Commands For Killing.
                                                              (line  41)
* kill-whole-line ():                    Commands For Killing.
                                                              (line  15)
* kill-word (M-d):                       Commands For Killing.
                                                              (line  19)
* killing text:                          Readline Killing Commands.
                                                              (line   6)
* kvm:                                   BSD libkvm Interface.
                                                              (line  24)
* l (list):                              List.                (line   6)
* languages:                             Languages.           (line   6)
* last tracepoint number:                Create and Delete Tracepoints.
                                                              (line  31)
* latest breakpoint:                     Set Breaks.          (line   6)
* layout:                                TUI Commands.        (line  15)
* LDT:                                   DJGPP Native.        (line  24)
* leaving GDB:                           Quitting GDB.        (line   6)
* Left:                                  TUI Keys.            (line  59)
* libkvm:                                BSD libkvm Interface.
                                                              (line   6)
* library list format, remote protocol:  Library List Format. (line   6)
* limit hardware breakpoints and watchpoints: Remote Configuration.
                                                              (line  72)
* limit on number of printed array elements: Print Settings.  (line 123)
* limits, in file-i/o protocol:          Limits.              (line   6)
* linespec:                              Specify Location.    (line   6)
* Linux lightweight processes:           Debugging Output.    (line  66)
* list:                                  List.                (line   6)
* list active threads, remote request:   General Query Packets.
                                                              (line  60)
* list of supported file-i/o calls:      List of Supported Calls.
                                                              (line   6)
* list output in GDB/MI:                 GDB/MI Output Syntax.
                                                              (line 115)
* list, and Objective-C:                 Method Names in Commands.
                                                              (line   9)
* list, how many lines to display:       List.                (line  30)
* listing GDB's internal symbol tables:  Symbols.             (line 270)
* listing machine instructions:          Machine Code.        (line  35)
* listing mapped overlays:               Overlay Commands.    (line  60)
* load address, overlay's:               How Overlays Work.   (line   6)
* load FILENAME:                         Target Commands.     (line 115)
* load shared library:                   Files.               (line 323)
* load symbols from memory:              Files.               (line 162)
* local variables:                       Symbols.             (line 130)
* locate address:                        Output Formats.      (line  35)
* lock scheduler:                        Thread Stops.        (line  90)
* log output in GDB/MI:                  GDB/MI Output Syntax.
                                                              (line 111)
* logging file name:                     Logging Output.      (line  13)
* logging GDB output:                    Logging Output.      (line   6)
* loop_break:                            Command Files.       (line  75)
* loop_continue:                         Command Files.       (line  79)
* lseek flags, in file-i/o protocol:     Lseek Flags.         (line   6)
* lseek, file-i/o system call:           lseek.               (line   6)
* M packet:                              Packets.             (line 185)
* m packet:                              Packets.             (line 165)
* M32-EVA target board address:          M32R/D.              (line  21)
* M32R/Chaos debugging:                  M32R/D.              (line  50)
* m680x0:                                Remote Stub.         (line  60)
* m68k-stub.c:                           Remote Stub.         (line  60)
* machine instructions:                  Machine Code.        (line  35)
* macro define:                          Macros.              (line  54)
* macro definition, showing:             Macros.              (line  50)
* macro exp1:                            Macros.              (line  39)
* macro expand:                          Macros.              (line  32)
* macro expansion, showing the results of preprocessor: Macros.
                                                              (line  32)
* macro list:                            Macros.              (line  76)
* macro undef:                           Macros.              (line  69)
* macros, example of debugging with:     Macros.              (line  80)
* macros, user-defined:                  Macros.              (line  54)
* mailing lists:                         GDB/MI Development and Front Ends.
                                                              (line  39)
* maint agent:                           Maintenance Commands.
                                                              (line  12)
* maint check-symtabs:                   Maintenance Commands.
                                                              (line  48)
* maint cplus first_component:           Maintenance Commands.
                                                              (line  51)
* maint cplus namespace:                 Maintenance Commands.
                                                              (line  54)
* maint demangle:                        Maintenance Commands.
                                                              (line  57)
* maint deprecate:                       Maintenance Commands.
                                                              (line  60)
* maint dump-me:                         Maintenance Commands.
                                                              (line  68)
* maint info breakpoints:                Maintenance Commands.
                                                              (line  17)
* maint info psymtabs:                   Symbols.             (line 270)
* maint info sections:                   Files.               (line 200)
* maint info sol-threads:                Threads.             (line 129)
* maint info symtabs:                    Symbols.             (line 270)
* maint internal-error:                  Maintenance Commands.
                                                              (line  73)
* maint internal-warning:                Maintenance Commands.
                                                              (line  73)
* maint packet:                          Maintenance Commands.
                                                              (line  94)
* maint print architecture:              Maintenance Commands.
                                                              (line 100)
* maint print c-tdesc:                   Maintenance Commands.
                                                              (line 104)
* maint print cooked-registers:          Maintenance Commands.
                                                              (line 127)
* maint print dummy-frames:              Maintenance Commands.
                                                              (line 109)
* maint print objfiles:                  Maintenance Commands.
                                                              (line 161)
* maint print psymbols:                  Symbols.             (line 251)
* maint print raw-registers:             Maintenance Commands.
                                                              (line 127)
* maint print reggroups:                 Maintenance Commands.
                                                              (line 142)
* maint print register-groups:           Maintenance Commands.
                                                              (line 127)
* maint print registers:                 Maintenance Commands.
                                                              (line 127)
* maint print statistics:                Maintenance Commands.
                                                              (line 166)
* maint print symbols:                   Symbols.             (line 251)
* maint print target-stack:              Maintenance Commands.
                                                              (line 179)
* maint print type:                      Maintenance Commands.
                                                              (line 191)
* maint print unwind, HPPA:              HPPA.                (line  17)
* maint set dwarf2 max-cache-age:        Maintenance Commands.
                                                              (line 198)
* maint set profile:                     Maintenance Commands.
                                                              (line 212)
* maint show dwarf2 max-cache-age:       Maintenance Commands.
                                                              (line 198)
* maint show profile:                    Maintenance Commands.
                                                              (line 212)
* maint show-debug-regs:                 Maintenance Commands.
                                                              (line 228)
* maint space:                           Maintenance Commands.
                                                              (line 235)
* maint time:                            Maintenance Commands.
                                                              (line 242)
* maint translate-address:               Maintenance Commands.
                                                              (line 249)
* maint undeprecate:                     Maintenance Commands.
                                                              (line  60)
* maintenance commands:                  Maintenance Commands.
                                                              (line   6)
* make:                                  Shell Commands.      (line  19)
* manual overlay debugging:              Overlay Commands.    (line  23)
* map an overlay:                        Overlay Commands.    (line  30)
* mapinfo list, QNX Neutrino:            SVR4 Process Information.
                                                              (line  78)
* mapped address:                        How Overlays Work.   (line   6)
* mapped overlays:                       How Overlays Work.   (line   6)
* mark-modified-lines:                   Readline Init File Syntax.
                                                              (line 132)
* mark-symlinked-directories:            Readline Init File Syntax.
                                                              (line 137)
* match-hidden-files:                    Readline Init File Syntax.
                                                              (line 142)
* maximum value for offset of closest symbol: Print Settings. (line  70)
* mem:                                   Memory Region Attributes.
                                                              (line  22)
* member functions:                      C Plus Plus Expressions.
                                                              (line  18)
* memory address space mappings:         SVR4 Process Information.
                                                              (line  32)
* memory map format:                     Memory Map Format.   (line   6)
* memory region attributes:              Memory Region Attributes.
                                                              (line   6)
* memory tracing:                        Breakpoints.         (line  20)
* memory transfer, in file-i/o protocol: Memory Transfer.     (line   6)
* memory used by commands:               Maintenance Commands.
                                                              (line 235)
* memory used for symbol tables:         Files.               (line 311)
* memory, alignment and size of remote accesses: Packets.     (line 172)
* memory, viewing as typed object:       Expressions.         (line  42)
* memset:                                Bootstrapping.       (line  70)
* menu-complete ():                      Commands For Completion.
                                                              (line  18)
* meta-flag:                             Readline Init File Syntax.
                                                              (line 105)
* mi interpreter:                        Interpreters.        (line  26)
* mi1 interpreter:                       Interpreters.        (line  34)
* mi2 interpreter:                       Interpreters.        (line  31)
* minimal language:                      Unsupported Languages.
                                                              (line   6)
* Minimal symbols and DLLs:              Non-debug DLL Symbols.
                                                              (line   6)
* MIPS addresses, masking:               MIPS.                (line  61)
* MIPS boards:                           MIPS Embedded.       (line   6)
* MIPS remote floating point:            MIPS Embedded.       (line  60)
* MIPS stack:                            MIPS.                (line   6)
* MMX registers (x86):                   Registers.           (line  71)
* mode_t values, in file-i/o protocol:   mode_t Values.       (line   6)
* Modula-2:                              Summary.             (line  27)
* Modula-2 built-ins:                    Built-In Func/Proc.  (line   6)
* Modula-2 checks:                       M2 Checks.           (line   6)
* Modula-2 constants:                    Built-In Func/Proc.  (line 112)
* Modula-2 defaults:                     M2 Defaults.         (line   6)
* Modula-2 operators:                    M2 Operators.        (line   6)
* Modula-2 types:                        M2 Types.            (line   6)
* Modula-2, deviations from:             Deviations.          (line   6)
* Modula-2, GDB support:                 Modula-2.            (line   6)
* monitor:                               Connecting.          (line 104)
* monitor commands, for gdbserver:       Server.              (line 149)
* Motorola 680x0:                        Remote Stub.         (line  60)
* MS Windows debugging:                  Cygwin Native.       (line   6)
* MS-DOS system info:                    DJGPP Native.        (line  19)
* MS-DOS-specific commands:              DJGPP Native.        (line   6)
* multiple processes:                    Processes.           (line   6)
* multiple processes with gdbserver:     Server.              (line  91)
* multiple targets:                      Active Targets.      (line   6)
* multiple threads:                      Threads.             (line   6)
* multiple threads, backtrace:           Backtrace.           (line  37)
* n (next):                              Continuing and Stepping.
                                                              (line  78)
* n (SingleKey TUI key):                 TUI Single Key Mode. (line  19)
* names of symbols:                      Symbols.             (line  14)
* namespace in C++:                      C Plus Plus Expressions.
                                                              (line  22)
* native Cygwin debugging:               Cygwin Native.       (line   6)
* native DJGPP debugging:                DJGPP Native.        (line   6)
* negative breakpoint numbers:           Set Breaks.          (line 289)
* NetROM ROM emulator target:            Target Commands.     (line  88)
* New SYSTAG message:                    Threads.             (line  47)
* New SYSTAG message, on HP-UX:          Threads.             (line  89)
* next:                                  Continuing and Stepping.
                                                              (line  78)
* next-history (C-n):                    Commands For History.
                                                              (line  16)
* nexti:                                 Continuing and Stepping.
                                                              (line 202)
* ni (nexti):                            Continuing and Stepping.
                                                              (line 202)
* non-incremental-forward-search-history (M-n): Commands For History.
                                                              (line  40)
* non-incremental-reverse-search-history (M-p): Commands For History.
                                                              (line  35)
* non-member C++ functions, set breakpoint in: Set Breaks.    (line 103)
* noninvasive task options:              Hurd Native.         (line  73)
* nosharedlibrary:                       Files.               (line 339)
* notation, readline:                    Readline Bare Essentials.
                                                              (line   6)
* notational conventions, for GDB/MI:    GDB/MI.              (line  25)
* notify output in GDB/MI:               GDB/MI Output Syntax.
                                                              (line 100)
* NULL elements in arrays:               Print Settings.      (line 187)
* number of array elements to print:     Print Settings.      (line 123)
* number representation:                 Numbers.             (line   6)
* numbers for breakpoints:               Breakpoints.         (line  41)
* object files, relocatable, reading symbols from: Files.     (line 132)
* Objective-C:                           Objective-C.         (line   6)
* Objective-C, classes and selectors:    Symbols.             (line 197)
* Objective-C, print objects:            The Print Command with Objective-C.
                                                              (line   6)
* observer debugging info:               Debugging Output.    (line  73)
* octal escapes in strings:              Print Settings.      (line 220)
* online documentation:                  Help.                (line   6)
* opaque data types:                     Symbols.             (line 233)
* open flags, in file-i/o protocol:      Open Flags.          (line   6)
* open, file-i/o system call:            open.                (line   6)
* OpenRISC 1000:                         OpenRISC 1000.       (line   6)
* OpenRISC 1000 htrace:                  OpenRISC 1000.       (line  58)
* optimized code, debugging:             Compilation.         (line  26)
* optimized code, wrong values of variables: Variables.       (line  58)
* optional debugging messages:           Debugging Output.    (line   6)
* optional warnings:                     Messages/Warnings.   (line   6)
* or1k boards:                           OpenRISC 1000.       (line   6)
* or1ksim:                               OpenRISC 1000.       (line  16)
* OS ABI:                                ABI.                 (line  11)
* OS information:                        OS Information.      (line   6)
* out-of-band records in GDB/MI:         GDB/MI Out-of-band Records.
                                                              (line   6)
* outermost frame:                       Frames.              (line  12)
* output:                                Output.              (line  35)
* output formats:                        Output Formats.      (line   6)
* output syntax of GDB/MI:               GDB/MI Output Syntax.
                                                              (line   6)
* output-meta:                           Readline Init File Syntax.
                                                              (line 149)
* overlay:                               Overlay Commands.    (line  17)
* overlay area:                          How Overlays Work.   (line   6)
* overlay example program:               Overlay Sample Program.
                                                              (line   6)
* overlays:                              Overlays.            (line   6)
* overlays, setting breakpoints in:      Overlay Commands.    (line  93)
* overload-choice annotation:            Prompting.           (line  32)
* overloaded functions, calling:         C Plus Plus Expressions.
                                                              (line  27)
* overloaded functions, overload resolution: Debugging C Plus Plus.
                                                              (line  47)
* overloading:                           Breakpoint Menus.    (line   6)
* overloading in C++:                    Debugging C Plus Plus.
                                                              (line  14)
* overwrite-mode ():                     Commands For Text.   (line  53)
* P packet:                              Packets.             (line 213)
* p packet:                              Packets.             (line 198)
* packet size, remote protocol:          General Query Packets.
                                                              (line 326)
* packets, reporting on stdout:          Debugging Output.    (line  86)
* packets, tracepoint:                   Tracepoint Packets.  (line   6)
* page tables display (MS-DOS):          DJGPP Native.        (line  56)
* page-completions:                      Readline Init File Syntax.
                                                              (line 154)
* partial symbol dump:                   Symbols.             (line 251)
* partial symbol tables, listing GDB's internal: Symbols.     (line 270)
* Pascal:                                Summary.             (line  30)
* Pascal objects, static members display: Print Settings.     (line 351)
* Pascal support in GDB, limitations:    Pascal.              (line   6)
* pass signals to inferior, remote request: General Query Packets.
                                                              (line 175)
* passcount:                             Tracepoint Passcounts.
                                                              (line   6)
* patching binaries:                     Patching.            (line   6)
* patching object files:                 Files.               (line  26)
* path:                                  Environment.         (line  14)
* pause current task (GNU Hurd):         Hurd Native.         (line  49)
* pause current thread (GNU Hurd):       Hurd Native.         (line  91)
* pauses in output:                      Screen Size.         (line   6)
* pending breakpoints:                   Set Breaks.          (line 217)
* PgDn:                                  TUI Keys.            (line  50)
* PgUp:                                  TUI Keys.            (line  47)
* physical address from linear address:  DJGPP Native.        (line  81)
* pipe, target remote to:                Connecting.          (line  60)
* pipes:                                 Starting.            (line  54)
* pmon, MIPS remote:                     MIPS Embedded.       (line 132)
* po (print-object):                     The Print Command with Objective-C.
                                                              (line   6)
* pointer values, in file-i/o protocol:  Pointer Values.      (line   6)
* pointer, finding referent:             Print Settings.      (line  79)
* port rights, GNU Hurd:                 Hurd Native.         (line  85)
* port sets, GNU Hurd:                   Hurd Native.         (line  85)
* possible-completions (M-?):            Commands For Completion.
                                                              (line  11)
* post-commands annotation:              Prompting.           (line  27)
* post-overload-choice annotation:       Prompting.           (line  32)
* post-prompt annotation:                Prompting.           (line  24)
* post-prompt-for-continue annotation:   Prompting.           (line  40)
* post-query annotation:                 Prompting.           (line  36)
* PowerPC architecture:                  PowerPC.             (line   6)
* pre-commands annotation:               Prompting.           (line  27)
* pre-overload-choice annotation:        Prompting.           (line  32)
* pre-prompt annotation:                 Prompting.           (line  24)
* pre-prompt-for-continue annotation:    Prompting.           (line  40)
* pre-query annotation:                  Prompting.           (line  36)
* prefix for shared library file names:  Files.               (line 369)
* prefix-meta (<ESC>):                   Miscellaneous Commands.
                                                              (line  18)
* premature return from system calls:    Thread Stops.        (line  37)
* preprocessor macro expansion, showing the results of: Macros.
                                                              (line  32)
* pretty print arrays:                   Print Settings.      (line  98)
* pretty print C++ virtual function tables: Print Settings.   (line 362)
* previous-history (C-p):                Commands For History.
                                                              (line  12)
* print:                                 Data.                (line   6)
* print all frame argument values:       Print Settings.      (line 135)
* print an Objective-C object description: The Print Command with Objective-C.
                                                              (line  11)
* print array indexes:                   Print Settings.      (line 108)
* print frame argument values for scalars only: Print Settings.
                                                              (line 135)
* print messages on thread start and exit: Threads.           (line 155)
* print settings:                        Print Settings.      (line   6)
* print structures in indented form:     Print Settings.      (line 196)
* print-object:                          The Print Command with Objective-C.
                                                              (line   6)
* print/don't print memory addresses:    Print Settings.      (line  13)
* printf:                                Output.              (line  46)
* printing byte arrays:                  Output Formats.      (line  60)
* printing data:                         Data.                (line   6)
* printing frame argument values:        Print Settings.      (line 135)
* printing strings:                      Output Formats.      (line  60)
* proc-trace-entry:                      SVR4 Process Information.
                                                              (line  70)
* proc-trace-exit:                       SVR4 Process Information.
                                                              (line  70)
* proc-untrace-entry:                    SVR4 Process Information.
                                                              (line  70)
* proc-untrace-exit:                     SVR4 Process Information.
                                                              (line  70)
* process detailed status information:   SVR4 Process Information.
                                                              (line  40)
* process ID:                            SVR4 Process Information.
                                                              (line  16)
* process info via /proc:                SVR4 Process Information.
                                                              (line   6)
* process list, QNX Neutrino:            SVR4 Process Information.
                                                              (line  74)
* process PROCESS-ID:                    Processes.           (line  90)
* process status register:               Registers.           (line  26)
* processes, multiple:                   Processes.           (line   6)
* procfs API calls:                      SVR4 Process Information.
                                                              (line  53)
* profiling GDB:                         Maintenance Commands.
                                                              (line 212)
* program counter register:              Registers.           (line  26)
* program entry point:                   Backtrace.           (line  87)
* prompt:                                Prompt.              (line   6)
* prompt annotation:                     Prompting.           (line  24)
* prompt-for-continue annotation:        Prompting.           (line  40)
* protocol basics, file-i/o:             Protocol Basics.     (line   6)
* protocol, GDB remote serial:           Overview.            (line  14)
* protocol-specific representation of datatypes, in file-i/o protocol: Protocol-specific Representation of Datatypes.
                                                              (line   6)
* ptrace system call:                    OS Information.      (line   9)
* ptype:                                 Symbols.             (line  77)
* putDebugChar:                          Bootstrapping.       (line  20)
* pwd:                                   Working Directory.   (line  19)
* q (quit):                              Quitting GDB.        (line   6)
* q (SingleKey TUI key):                 TUI Single Key Mode. (line  22)
* Q packet:                              Packets.             (line 226)
* q packet:                              Packets.             (line 226)
* qC packet:                             General Query Packets.
                                                              (line  41)
* qCRC packet:                           General Query Packets.
                                                              (line  51)
* qfThreadInfo packet:                   General Query Packets.
                                                              (line  60)
* qGetTLSAddr packet:                    General Query Packets.
                                                              (line  87)
* QNX Neutrino:                          Neutrino.            (line   6)
* qOffsets packet:                       General Query Packets.
                                                              (line 139)
* qP packet:                             General Query Packets.
                                                              (line 166)
* QPassSignals packet:                   General Query Packets.
                                                              (line 175)
* qRcmd packet:                          General Query Packets.
                                                              (line 203)
* qsThreadInfo packet:                   General Query Packets.
                                                              (line  60)
* qSupported packet:                     General Query Packets.
                                                              (line 228)
* qSymbol packet:                        General Query Packets.
                                                              (line 367)
* qThreadExtraInfo packet:               General Query Packets.
                                                              (line 403)
* query annotation:                      Prompting.           (line  36)
* quit [EXPRESSION]:                     Quitting GDB.        (line   6)
* quit annotation:                       Errors.              (line   6)
* quoted-insert (C-q or C-v):            Commands For Text.   (line  20)
* quotes in commands:                    Completion.          (line  57)
* quoting Ada internal identifiers:      Additions to Ada.    (line  76)
* quoting names:                         Symbols.             (line  14)
* qXfer packet:                          General Query Packets.
                                                              (line 429)
* r (run):                               Starting.            (line   6)
* r (SingleKey TUI key):                 TUI Single Key Mode. (line  25)
* R packet:                              Packets.             (line 235)
* r packet:                              Packets.             (line 230)
* raise exceptions:                      Set Catchpoints.     (line  80)
* range checking:                        Type Checking.       (line  65)
* ranges of breakpoints:                 Breakpoints.         (line  48)
* rbreak:                                Set Breaks.          (line  87)
* RDI heartbeat:                         ARM.                 (line  93)
* rdilogenable:                          ARM.                 (line  76)
* rdilogfile:                            ARM.                 (line  70)
* re-read-init-file (C-x C-r):           Miscellaneous Commands.
                                                              (line   6)
* read special object, remote request:   General Query Packets.
                                                              (line 429)
* read, file-i/o system call:            read.                (line   6)
* read-only sections:                    Files.               (line 258)
* reading symbols from relocatable object files: Files.       (line 132)
* reading symbols immediately:           Files.               (line  90)
* readline:                              Editing.             (line   6)
* readnow:                               Files.               (line  90)
* receive rights, GNU Hurd:              Hurd Native.         (line  85)
* recent tracepoint number:              Create and Delete Tracepoints.
                                                              (line  31)
* record aggregates (Ada):               Omissions from Ada.  (line  44)
* record serial communications on file:  Remote Configuration.
                                                              (line  57)
* recording a session script:            Bug Reporting.       (line 104)
* redirection:                           Input/Output.        (line   6)
* redraw-current-line ():                Commands For Moving. (line  30)
* reference card:                        Formatting Documentation.
                                                              (line   6)
* reference declarations:                C Plus Plus Expressions.
                                                              (line  51)
* refresh:                               TUI Commands.        (line  52)
* register stack, AMD29K:                A29K.                (line   6)
* registers:                             Registers.           (line   6)
* regs, Super-H:                         Super-H.             (line   9)
* regular expression:                    Set Breaks.          (line  87)
* reloading symbols:                     Symbols.             (line 209)
* reloading the overlay table:           Overlay Commands.    (line  52)
* relocatable object files, reading symbols from: Files.      (line 132)
* remote connection without stubs:       Server.              (line   6)
* remote debugging:                      Remote Debugging.    (line   6)
* remote delete:                         File Transfer.       (line  23)
* remote get:                            File Transfer.       (line  19)
* remote memory comparison:              Memory.              (line 105)
* remote monitor prompt:                 MIPS Embedded.       (line 107)
* remote packets, enabling and disabling: Remote Configuration.
                                                              (line  84)
* remote programs, interrupting:         Connecting.          (line  77)
* remote protocol debugging:             Debugging Output.    (line  86)
* remote protocol, binary data:          Overview.            (line  55)
* remote protocol, field separator:      Overview.            (line  47)
* remote put:                            File Transfer.       (line  15)
* remote query requests:                 General Query Packets.
                                                              (line   6)
* remote serial debugging summary:       Debug Session.       (line   6)
* remote serial debugging, overview:     Remote Stub.         (line  14)
* remote serial protocol:                Overview.            (line  14)
* remote serial stub:                    Stub Contents.       (line   6)
* remote serial stub list:               Remote Stub.         (line  54)
* remote serial stub, initialization:    Stub Contents.       (line  10)
* remote serial stub, main routine:      Stub Contents.       (line  15)
* remote stub, example:                  Remote Stub.         (line   6)
* remote stub, support routines:         Bootstrapping.       (line   6)
* remote target:                         Target Commands.     (line  58)
* remote target, file transfer:          File Transfer.       (line   6)
* remote target, limit break- and watchpoints: Remote Configuration.
                                                              (line  72)
* remote timeout:                        Remote Configuration.
                                                              (line  65)
* remotetimeout:                         Sparclet.            (line  12)
* remove actions from a tracepoint:      Tracepoint Actions.  (line  17)
* rename, file-i/o system call:          rename.              (line   6)
* Renesas:                               Remote Stub.         (line  63)
* repeated array elements:               Print Settings.      (line 174)
* repeating command sequences:           Command Syntax.      (line  42)
* repeating commands:                    Command Syntax.      (line  21)
* reporting bugs in GDB:                 GDB Bugs.            (line   6)
* reprint the last value:                Data.                (line  21)
* reset SDI connection, M32R:            M32R/D.              (line  44)
* response time, MIPS debugging:         MIPS.                (line  10)
* restart:                               Checkpoint/Restart.  (line   6)
* restart CHECKPOINT-ID:                 Checkpoint/Restart.  (line  44)
* restore:                               Dump/Restore Files.  (line  41)
* restore data from a file:              Dump/Restore Files.  (line   6)
* result records in GDB/MI:              GDB/MI Result Records.
                                                              (line   6)
* resuming execution:                    Continuing and Stepping.
                                                              (line   6)
* RET (repeat last command):             Command Syntax.      (line  21)
* retransmit-timeout, MIPS protocol:     MIPS Embedded.       (line  83)
* return:                                Returning.           (line   6)
* returning from a function:             Returning.           (line   6)
* reverse-search:                        Search.              (line  16)
* reverse-search-history (C-r):          Commands For History.
                                                              (line  26)
* revert-line (M-r):                     Miscellaneous Commands.
                                                              (line  25)
* rewind program state:                  Checkpoint/Restart.  (line   6)
* Right:                                 TUI Keys.            (line  62)
* ROM at zero address, RDI:              ARM.                 (line  83)
* run:                                   Starting.            (line   6)
* run to main procedure:                 Starting.            (line  71)
* run until specified location:          Continuing and Stepping.
                                                              (line 117)
* running:                               Starting.            (line   6)
* running and debugging Sparclet programs: Sparclet Execution.
                                                              (line   6)
* running VxWorks tasks:                 VxWorks Attach.      (line   6)
* running, on Sparclet:                  Sparclet.            (line  28)
* rwatch:                                Set Watchpoints.     (line  47)
* s (SingleKey TUI key):                 TUI Single Key Mode. (line  28)
* s (step):                              Continuing and Stepping.
                                                              (line  46)
* S packet:                              Packets.             (line 248)
* s packet:                              Packets.             (line 242)
* save command history:                  Command History.     (line  36)
* save GDB output to a file:             Logging Output.      (line   6)
* save tracepoints for future sessions:  save-tracepoints.    (line   6)
* save-tracepoints:                      save-tracepoints.    (line   6)
* scheduler locking mode:                Thread Stops.        (line  90)
* scope:                                 M2 Scope.            (line   6)
* scripting commands:                    Command Files.       (line   6)
* sdireset:                              M32R/D.              (line  44)
* sdistatus:                             M32R/D.              (line  47)
* SDS protocol:                          PowerPC Embedded.    (line  34)
* sds, a command:                        PowerPC Embedded.    (line  45)
* search:                                Search.              (line   9)
* searching source files:                Search.              (line   6)
* section:                               Files.               (line 182)
* section offsets, remote request:       General Query Packets.
                                                              (line 139)
* segment descriptor tables:             DJGPP Native.        (line  24)
* select trace snapshot:                 tfind.               (line   6)
* select-frame:                          Frames.              (line  51)
* selected frame:                        Stack.               (line  19)
* selecting frame silently:              Frames.              (line  51)
* self-insert (a, b, A, 1, !, ...):      Commands For Text.   (line  27)
* send command to remote monitor:        Connecting.          (line 104)
* send command to simulator:             Embedded Processors. (line   9)
* send PMON command:                     MIPS Embedded.       (line 132)
* send rights, GNU Hurd:                 Hurd Native.         (line  85)
* sending files to remote systems:       File Transfer.       (line   6)
* separate debugging information files:  Separate Debug Files.
                                                              (line   6)
* sequence-id, for GDB remote:           Overview.            (line  29)
* serial connections, debugging:         Debugging Output.    (line  86)
* serial line, target remote:            Connecting.          (line  18)
* serial protocol, GDB remote:           Overview.            (line  14)
* server prefix:                         Server Prefix.       (line   6)
* server, command prefix:                Command History.     (line  20)
* set:                                   Help.                (line 107)
* set ABI for MIPS:                      MIPS.                (line  32)
* set annotate:                          Annotations Overview.
                                                              (line  29)
* set architecture:                      Targets.             (line  21)
* set args:                              Arguments.           (line  21)
* set arm:                               ARM.                 (line  18)
* set auto-solib-add:                    Files.               (line 303)
* set backtrace:                         Backtrace.           (line  98)
* set board-address:                     M32R/D.              (line  21)
* set breakpoint auto-hw:                Set Breaks.          (line 279)
* set breakpoint pending:                Set Breaks.          (line 248)
* set breakpoints in many functions:     Set Breaks.          (line  87)
* set breakpoints on all functions:      Set Breaks.          (line 107)
* set can-use-hw-watchpoints:            Set Watchpoints.     (line  74)
* set case-sensitive:                    Symbols.             (line  27)
* set charset:                           Character Sets.      (line  47)
* set check range:                       Range Checking.      (line  34)
* set check type:                        Type Checking.       (line  42)
* set coerce-float-to-double:            ABI.                 (line  41)
* set com1base:                          DJGPP Native.        (line 125)
* set com1irq:                           DJGPP Native.        (line 125)
* set com2base:                          DJGPP Native.        (line 125)
* set com2irq:                           DJGPP Native.        (line 125)
* set com3base:                          DJGPP Native.        (line 125)
* set com3irq:                           DJGPP Native.        (line 125)
* set com4base:                          DJGPP Native.        (line 125)
* set com4irq:                           DJGPP Native.        (line 125)
* set complaints:                        Messages/Warnings.   (line  29)
* set confirm:                           Messages/Warnings.   (line  50)
* set cp-abi:                            ABI.                 (line  53)
* set cygwin-exceptions:                 Cygwin Native.       (line  30)
* set debug:                             Debugging Output.    (line  18)
* set debug hppa:                        HPPA.                (line  10)
* set debug mips:                        MIPS.                (line  81)
* set debug monitor:                     Target Commands.     (line 108)
* set debug nto-debug:                   Neutrino.            (line   9)
* set debug-file-directory:              Separate Debug Files.
                                                              (line  68)
* set debugevents:                       Cygwin Native.       (line  59)
* set debugexceptions:                   Cygwin Native.       (line  70)
* set debugexec:                         Cygwin Native.       (line  66)
* set debugmemory:                       Cygwin Native.       (line  74)
* set demangle-style:                    Print Settings.      (line 294)
* set detach-on-fork:                    Processes.           (line  55)
* set disassembly-flavor:                Machine Code.        (line  67)
* set download-path:                     M32R/D.              (line  15)
* set editing:                           Editing.             (line  15)
* set endian:                            Byte Order.          (line  13)
* set environment:                       Environment.         (line  39)
* set exceptions, Hurd command:          Hurd Native.         (line  40)
* set exec-done-display:                 Debugging Output.    (line  11)
* set extension-language:                Show.                (line  30)
* set follow-fork-mode:                  Processes.           (line  35)
* set gnutarget:                         Target Commands.     (line  28)
* set hash, for remote monitors:         Target Commands.     (line  99)
* set height:                            Screen Size.         (line  21)
* set history expansion:                 Command History.     (line  65)
* set history filename:                  Command History.     (line  26)
* set history save:                      Command History.     (line  36)
* set history size:                      Command History.     (line  45)
* set host-charset:                      Character Sets.      (line  34)
* set inferior controlling terminal:     Input/Output.        (line  44)
* set inferior-tty:                      Input/Output.        (line  49)
* set input-radix:                       Numbers.             (line  14)
* set language:                          Manually.            (line   9)
* set listsize:                          List.                (line  33)
* set logging:                           Logging Output.      (line   9)
* set max-user-call-depth:               Define.              (line  73)
* set mem inaccessible-by-default:       Memory Region Attributes.
                                                              (line 130)
* set mips abi:                          MIPS.                (line  32)
* set mips mask-address:                 MIPS.                (line  61)
* set mipsfpu:                           MIPS Embedded.       (line  60)
* set monitor-prompt, MIPS remote:       MIPS Embedded.       (line 107)
* set monitor-warnings, MIPS remote:     MIPS Embedded.       (line 123)
* set new-console:                       Cygwin Native.       (line  42)
* set new-group:                         Cygwin Native.       (line  51)
* set opaque-type-resolution:            Symbols.             (line 233)
* set osabi:                             ABI.                 (line  11)
* set output-radix:                      Numbers.             (line  31)
* set overload-resolution:               Debugging C Plus Plus.
                                                              (line  47)
* set pagination:                        Screen Size.         (line  38)
* set powerpc:                           PowerPC Embedded.    (line   8)
* set print:                             Print Settings.      (line  11)
* set print thread-events:               Threads.             (line 155)
* set processor:                         Targets.             (line  31)
* set procfs-file:                       SVR4 Process Information.
                                                              (line  59)
* set procfs-trace:                      SVR4 Process Information.
                                                              (line  53)
* set prompt:                            Prompt.              (line  16)
* set radix:                             Numbers.             (line  44)
* set rdiheartbeat:                      ARM.                 (line  93)
* set rdiromatzero:                      ARM.                 (line  83)
* set remote:                            Remote Configuration.
                                                              (line   6)
* set remote system-call-allowed:        system.              (line  38)
* set remote-mips64-transfers-32bit-regs: MIPS.               (line  71)
* set remotecache:                       Caching Remote Data. (line  14)
* set remoteflow:                        Remote Configuration.
                                                              (line  41)
* set retransmit-timeout:                MIPS Embedded.       (line  83)
* set rstack_high_address:               A29K.                (line   6)
* set sdstimeout:                        PowerPC Embedded.    (line  38)
* set server-address:                    M32R/D.              (line  27)
* set shell:                             Cygwin Native.       (line  78)
* set signal-thread:                     Hurd Native.         (line  21)
* set signals, Hurd command:             Hurd Native.         (line  11)
* set sigs, Hurd command:                Hurd Native.         (line  11)
* set sigthread:                         Hurd Native.         (line  21)
* set solib-absolute-prefix:             Files.               (line 369)
* set solib-search-path:                 Files.               (line 390)
* set step-mode:                         Continuing and Stepping.
                                                              (line  92)
* set stop-on-solib-events:              Files.               (line 349)
* set stopped, Hurd command:             Hurd Native.         (line  32)
* set struct-convention:                 i386.                (line   7)
* set substitute-path:                   Source Path.         (line 114)
* set symbol-reloading:                  Symbols.             (line 216)
* set syn-garbage-limit, MIPS remote:    MIPS Embedded.       (line  98)
* set sysroot:                           Files.               (line 369)
* set target-charset:                    Character Sets.      (line  28)
* set task, Hurd commands:               Hurd Native.         (line  49)
* set tdesc filename:                    Retrieving Descriptions.
                                                              (line  18)
* set thread, Hurd command:              Hurd Native.         (line  91)
* set timeout:                           MIPS Embedded.       (line  83)
* set trace-commands:                    Messages/Warnings.   (line  65)
* set tracepoint:                        Create and Delete Tracepoints.
                                                              (line   6)
* set trust-readonly-sections:           Files.               (line 258)
* set tui active-border-mode:            TUI Configuration.   (line  24)
* set tui border-kind:                   TUI Configuration.   (line   9)
* set tui border-mode:                   TUI Configuration.   (line  23)
* set unwindonsignal:                    Calling.             (line  26)
* set variable:                          Assignment.          (line  16)
* set verbose:                           Messages/Warnings.   (line  15)
* set watchdog:                          Maintenance Commands.
                                                              (line 262)
* set width:                             Screen Size.         (line  21)
* set write:                             Patching.            (line  15)
* set-mark (C-@):                        Miscellaneous Commands.
                                                              (line  32)
* set_debug_traps:                       Stub Contents.       (line  10)
* setting variables:                     Assignment.          (line   6)
* setting watchpoints:                   Set Watchpoints.     (line   6)
* SH:                                    Remote Stub.         (line  63)
* sh-stub.c:                             Remote Stub.         (line  63)
* share:                                 Files.               (line 330)
* shared libraries:                      Files.               (line 281)
* shared library events, remote reply:   Stop Reply Packets.  (line  52)
* sharedlibrary:                         Files.               (line 330)
* shell:                                 Shell Commands.      (line  10)
* shell escape:                          Shell Commands.      (line  10)
* show:                                  Help.                (line 112)
* show all user variables:               Convenience Vars.    (line  37)
* show annotate:                         Annotations Overview.
                                                              (line  34)
* show architecture:                     Targets.             (line  21)
* show args:                             Arguments.           (line  28)
* show arm:                              ARM.                 (line  22)
* show auto-solib-add:                   Files.               (line 320)
* show backtrace:                        Backtrace.           (line 105)
* show board-address:                    M32R/D.              (line  24)
* show breakpoint auto-hw:               Set Breaks.          (line 279)
* show breakpoint pending:               Set Breaks.          (line 248)
* show can-use-hw-watchpoints:           Set Watchpoints.     (line  77)
* show case-sensitive:                   Symbols.             (line  40)
* show charset:                          Character Sets.      (line  53)
* show check range:                      Range Checking.      (line  34)
* show check type:                       Type Checking.       (line  42)
* show coerce-float-to-double:           ABI.                 (line  50)
* show com1base:                         DJGPP Native.        (line 137)
* show com1irq:                          DJGPP Native.        (line 137)
* show com2base:                         DJGPP Native.        (line 137)
* show com2irq:                          DJGPP Native.        (line 137)
* show com3base:                         DJGPP Native.        (line 137)
* show com3irq:                          DJGPP Native.        (line 137)
* show com4base:                         DJGPP Native.        (line 137)
* show com4irq:                          DJGPP Native.        (line 137)
* show commands:                         Command History.     (line  78)
* show complaints:                       Messages/Warnings.   (line  35)
* show confirm:                          Messages/Warnings.   (line  56)
* show convenience:                      Convenience Vars.    (line  37)
* show copying:                          Help.                (line 136)
* show cp-abi:                           ABI.                 (line  53)
* show cygwin-exceptions:                Cygwin Native.       (line  38)
* show debug:                            Debugging Output.    (line  22)
* show debug mips:                       MIPS.                (line  85)
* show debug monitor:                    Target Commands.     (line 112)
* show debug nto-debug:                  Neutrino.            (line  13)
* show debug-file-directory:             Separate Debug Files.
                                                              (line  72)
* show detach-on-fork:                   Processes.           (line  71)
* show directories:                      Source Path.         (line 111)
* show disassembly-flavor:               Machine Code.        (line  76)
* show download-path:                    M32R/D.              (line  18)
* show editing:                          Editing.             (line  22)
* show environment:                      Environment.         (line  33)
* show exceptions, Hurd command:         Hurd Native.         (line  46)
* show exec-done-display:                Debugging Output.    (line  14)
* show follow-fork-mode:                 Processes.           (line  49)
* show gnutarget:                        Target Commands.     (line  40)
* show hash, for remote monitors:        Target Commands.     (line 105)
* show height:                           Screen Size.         (line  21)
* show history:                          Command History.     (line  70)
* show host-charset:                     Character Sets.      (line  56)
* show inferior-tty:                     Input/Output.        (line  52)
* show input-radix:                      Numbers.             (line  36)
* show language:                         Show.                (line  10)
* show last commands:                    Command History.     (line  78)
* show listsize:                         List.                (line  37)
* show logging:                          Logging Output.      (line  26)
* show max-user-call-depth:              Define.              (line  73)
* show mem inaccessible-by-default:      Memory Region Attributes.
                                                              (line 136)
* show mips abi:                         MIPS.                (line  54)
* show mips mask-address:                MIPS.                (line  67)
* show mipsfpu:                          MIPS Embedded.       (line  60)
* show monitor-prompt, MIPS remote:      MIPS Embedded.       (line 119)
* show monitor-warnings, MIPS remote:    MIPS Embedded.       (line 129)
* show new-console:                      Cygwin Native.       (line  47)
* show new-group:                        Cygwin Native.       (line  56)
* show opaque-type-resolution:           Symbols.             (line 248)
* show osabi:                            ABI.                 (line  11)
* show output-radix:                     Numbers.             (line  39)
* show overload-resolution:              Debugging C Plus Plus.
                                                              (line  64)
* show pagination:                       Screen Size.         (line  42)
* show paths:                            Environment.         (line  29)
* show print:                            Print Settings.      (line  39)
* show print thread-events:              Threads.             (line 165)
* show processor:                        Targets.             (line  31)
* show procfs-file:                      SVR4 Process Information.
                                                              (line  64)
* show procfs-trace:                     SVR4 Process Information.
                                                              (line  56)
* show prompt:                           Prompt.              (line  19)
* show radix:                            Numbers.             (line  44)
* show rdiheartbeat:                     ARM.                 (line  98)
* show rdiromatzero:                     ARM.                 (line  90)
* show remote:                           Remote Configuration.
                                                              (line   6)
* show remote system-call-allowed:       system.              (line  42)
* show remote-mips64-transfers-32bit-regs: MIPS.              (line  77)
* show remotecache:                      Caching Remote Data. (line  19)
* show remoteflow:                       Remote Configuration.
                                                              (line  45)
* show retransmit-timeout:               MIPS Embedded.       (line  83)
* show rstack_high_address:              A29K.                (line  17)
* show sdstimeout:                       PowerPC Embedded.    (line  42)
* show server-address:                   M32R/D.              (line  31)
* show shell:                            Cygwin Native.       (line  82)
* show signal-thread:                    Hurd Native.         (line  28)
* show signals, Hurd command:            Hurd Native.         (line  17)
* show sigs, Hurd command:               Hurd Native.         (line  17)
* show sigthread:                        Hurd Native.         (line  28)
* show solib-search-path:                Files.               (line 401)
* show stop-on-solib-events:             Files.               (line 355)
* show stopped, Hurd command:            Hurd Native.         (line  37)
* show struct-convention:                i386.                (line  15)
* show substitute-path:                  Source Path.         (line 151)
* show symbol-reloading:                 Symbols.             (line 230)
* show syn-garbage-limit, MIPS remote:   MIPS Embedded.       (line 103)
* show sysroot:                          Files.               (line 387)
* show target-charset:                   Character Sets.      (line  59)
* show task, Hurd commands:              Hurd Native.         (line  57)
* show tdesc filename:                   Retrieving Descriptions.
                                                              (line  25)
* show thread, Hurd command:             Hurd Native.         (line 101)
* show timeout:                          MIPS Embedded.       (line  83)
* show unwindonsignal:                   Calling.             (line  33)
* show user:                             Define.              (line  67)
* show values:                           Value History.       (line  47)
* show verbose:                          Messages/Warnings.   (line  21)
* show version:                          Help.                (line 126)
* show warranty:                         Help.                (line 140)
* show width:                            Screen Size.         (line  21)
* show write:                            Patching.            (line  26)
* show-all-if-ambiguous:                 Readline Init File Syntax.
                                                              (line 164)
* show-all-if-unmodified:                Readline Init File Syntax.
                                                              (line 170)
* si (stepi):                            Continuing and Stepping.
                                                              (line 189)
* signal:                                Signaling.           (line   6)
* signal annotation:                     Annotations for Running.
                                                              (line  42)
* signal-name annotation:                Annotations for Running.
                                                              (line  22)
* signal-name-end annotation:            Annotations for Running.
                                                              (line  22)
* signal-string annotation:              Annotations for Running.
                                                              (line  22)
* signal-string-end annotation:          Annotations for Running.
                                                              (line  22)
* signalled annotation:                  Annotations for Running.
                                                              (line  22)
* signals:                               Signals.             (line   6)
* SIGQUIT signal, dump core of GDB:      Maintenance Commands.
                                                              (line  69)
* silent:                                Break Commands.      (line  38)
* sim:                                   Z8000.               (line  15)
* sim, a command:                        Embedded Processors. (line  13)
* simulator, Z8000:                      Z8000.               (line   6)
* size of remote memory accesses:        Packets.             (line 172)
* size of screen:                        Screen Size.         (line   6)
* snapshot of a process:                 Checkpoint/Restart.  (line   6)
* software watchpoints:                  Set Watchpoints.     (line  22)
* source:                                Command Files.       (line  14)
* source annotation:                     Source Annotations.  (line   6)
* source file and line of a symbol:      Print Settings.      (line  51)
* source line and its code address:      Machine Code.        (line   6)
* source path:                           Source Path.         (line   6)
* Sparc:                                 Remote Stub.         (line  66)
* sparc-stub.c:                          Remote Stub.         (line  66)
* sparcl-stub.c:                         Remote Stub.         (line  69)
* Sparclet:                              Sparclet.            (line   6)
* SparcLite:                             Remote Stub.         (line  69)
* Special Fortran commands:              Special Fortran Commands.
                                                              (line   6)
* specifying location:                   Specify Location.    (line   6)
* spr:                                   OpenRISC 1000.       (line  33)
* SPU:                                   SPU.                 (line   6)
* SSE registers (x86):                   Registers.           (line  71)
* stack frame:                           Frames.              (line   6)
* stack on Alpha:                        MIPS.                (line   6)
* stack on MIPS:                         MIPS.                (line   6)
* stack pointer register:                Registers.           (line  26)
* stacking targets:                      Active Targets.      (line   6)
* standard registers:                    Registers.           (line  26)
* start:                                 Starting.            (line  70)
* start a new trace experiment:          Starting and Stopping Trace Experiments.
                                                              (line   6)
* start-kbd-macro (C-x ():               Keyboard Macros.     (line   6)
* starting:                              Starting.            (line   6)
* starting annotation:                   Annotations for Running.
                                                              (line   6)
* startup code, and backtrace:           Backtrace.           (line  87)
* stat, file-i/o system call:            stat/fstat.          (line   6)
* static members of C++ objects:         Print Settings.      (line 340)
* static members of Pascal objects:      Print Settings.      (line 351)
* status of trace data collection:       Starting and Stopping Trace Experiments.
                                                              (line  20)
* status output in GDB/MI:               GDB/MI Output Syntax.
                                                              (line  92)
* step:                                  Continuing and Stepping.
                                                              (line  46)
* stepi:                                 Continuing and Stepping.
                                                              (line 189)
* stepping:                              Continuing and Stepping.
                                                              (line   6)
* stepping into functions with no line info: Continuing and Stepping.
                                                              (line  93)
* stop a running trace experiment:       Starting and Stopping Trace Experiments.
                                                              (line  12)
* stop on C++ exceptions:                Set Catchpoints.     (line  13)
* stop reply packets:                    Stop Reply Packets.  (line   6)
* stop, a pseudo-command:                Hooks.               (line  21)
* stopped threads:                       Thread Stops.        (line  32)
* stopping annotation:                   Annotations for Running.
                                                              (line   6)
* stream records in GDB/MI:              GDB/MI Stream Records.
                                                              (line   6)
* struct return convention:              i386.                (line   7)
* struct stat, in file-i/o protocol:     struct stat.         (line   6)
* struct timeval, in file-i/o protocol:  struct timeval.      (line   6)
* struct user contents:                  OS Information.      (line   9)
* struct/union returned in registers:    i386.                (line   7)
* stub example, remote debugging:        Remote Stub.         (line   6)
* stupid questions:                      Messages/Warnings.   (line  50)
* Super-H:                               Super-H.             (line   6)
* supported packets, remote query:       General Query Packets.
                                                              (line 228)
* switching threads:                     Threads.             (line   6)
* switching threads automatically:       Threads.             (line 169)
* symbol decoding style, C++:            Print Settings.      (line 294)
* symbol dump:                           Symbols.             (line 251)
* symbol from address:                   Symbols.             (line  54)
* symbol lookup, remote request:         General Query Packets.
                                                              (line 367)
* symbol names:                          Symbols.             (line  14)
* symbol overloading:                    Breakpoint Menus.    (line   6)
* symbol table:                          Files.               (line   6)
* symbol tables, listing GDB's internal: Symbols.             (line 270)
* symbol, source file and line:          Print Settings.      (line  51)
* symbol-file:                           Files.               (line  45)
* symbols, reading from relocatable object files: Files.      (line 132)
* symbols, reading immediately:          Files.               (line  90)
* synchronize with remote MIPS target:   MIPS Embedded.       (line  98)
* syscall DSO:                           Files.               (line 162)
* sysinfo:                               DJGPP Native.        (line  19)
* system calls and thread breakpoints:   Thread Stops.        (line  37)
* system root, alternate:                Files.               (line 369)
* system, file-i/o system call:          system.              (line   6)
* T packet:                              Packets.             (line 260)
* t packet:                              Packets.             (line 255)
* T packet reply:                        Stop Reply Packets.  (line  22)
* tabset:                                TUI Commands.        (line  78)
* target:                                Target Commands.     (line  49)
* target architecture:                   Targets.             (line  17)
* target array:                          MIPS Embedded.       (line  49)
* target byte order:                     Byte Order.          (line   6)
* target character set:                  Character Sets.      (line   6)
* target dbug:                           M68K.                (line   9)
* target ddb PORT:                       MIPS Embedded.       (line  41)
* target debugging info:                 Debugging Output.    (line 111)
* target descriptions:                   Target Descriptions. (line   6)
* target descriptions, ARM features:     ARM Features.        (line   6)
* target descriptions, inclusion:        Target Description Format.
                                                              (line  51)
* target descriptions, M68K features:    M68K Features.       (line   6)
* target descriptions, MIPS features:    MIPS Features.       (line   6)
* target descriptions, PowerPC features: PowerPC Features.    (line   6)
* target descriptions, predefined types: Predefined Target Types.
                                                              (line   6)
* target descriptions, standard features: Standard Target Features.
                                                              (line   6)
* target descriptions, XML format:       Target Description Format.
                                                              (line   6)
* target dink32:                         PowerPC Embedded.    (line  23)
* target jtag:                           OpenRISC 1000.       (line   9)
* target lsi PORT:                       MIPS Embedded.       (line  44)
* target m32r:                           M32R/D.              (line   6)
* target m32rsdi:                        M32R/D.              (line   9)
* target mips PORT:                      MIPS Embedded.       (line  14)
* target op50n:                          PA.                  (line   6)
* target output in GDB/MI:               GDB/MI Output Syntax.
                                                              (line 108)
* target pmon PORT:                      MIPS Embedded.       (line  38)
* target ppcbug:                         PowerPC Embedded.    (line  26)
* target ppcbug1:                        PowerPC Embedded.    (line  27)
* target r3900:                          MIPS Embedded.       (line  46)
* target rdi:                            ARM.                 (line   6)
* target rdp:                            ARM.                 (line  11)
* target remote:                         Connecting.          (line  11)
* target sds:                            PowerPC Embedded.    (line  31)
* target sim, with Z8000:                Z8000.               (line  15)
* target sparclite:                      Sparclite.           (line   6)
* target stack description:              Maintenance Commands.
                                                              (line 179)
* target vxworks:                        VxWorks.             (line   6)
* target w89k:                           PA.                  (line   9)
* task attributes (GNU Hurd):            Hurd Native.         (line  49)
* task exception port, GNU Hurd:         Hurd Native.         (line  68)
* task suspend count:                    Hurd Native.         (line  60)
* tbreak:                                Set Breaks.          (line  50)
* TCP port, target remote:               Connecting.          (line  29)
* tdump:                                 tdump.               (line   6)
* terminal:                              Input/Output.        (line   6)
* Text User Interface:                   TUI.                 (line   6)
* tfind:                                 tfind.               (line   6)
* thbreak:                               Set Breaks.          (line  77)
* this, inside C++ member functions:     C Plus Plus Expressions.
                                                              (line  22)
* thread apply:                          Threads.             (line 146)
* thread attributes info, remote request: General Query Packets.
                                                              (line 403)
* thread breakpoints:                    Thread Stops.        (line  10)
* thread breakpoints and system calls:   Thread Stops.        (line  37)
* thread default settings, GNU Hurd:     Hurd Native.         (line 131)
* thread identifier (GDB):               Threads.             (line  59)
* thread identifier (GDB), on HP-UX:     Threads.             (line  85)
* thread identifier (system):            Threads.             (line  47)
* thread identifier (system), on HP-UX:  Threads.             (line  89)
* thread info (Solaris):                 Threads.             (line 129)
* thread information, remote request:    General Query Packets.
                                                              (line 166)
* thread number:                         Threads.             (line  59)
* thread properties, GNU Hurd:           Hurd Native.         (line  91)
* thread suspend count, GNU Hurd:        Hurd Native.         (line 110)
* thread THREADNO:                       Threads.             (line 131)
* threads and watchpoints:               Set Watchpoints.     (line 149)
* threads of execution:                  Threads.             (line   6)
* threads, automatic switching:          Threads.             (line 169)
* threads, continuing:                   Thread Stops.        (line  70)
* threads, stopped:                      Thread Stops.        (line  32)
* time of command execution:             Maintenance Commands.
                                                              (line 242)
* timeout for commands:                  Maintenance Commands.
                                                              (line 262)
* timeout for serial communications:     Remote Configuration.
                                                              (line  65)
* timeout, MIPS protocol:                MIPS Embedded.       (line  83)
* tload, M32R:                           M32R/D.              (line  39)
* trace:                                 Create and Delete Tracepoints.
                                                              (line   6)
* trace experiment, status of:           Starting and Stopping Trace Experiments.
                                                              (line  20)
* traceback:                             Backtrace.           (line   6)
* tracepoint actions:                    Tracepoint Actions.  (line   6)
* tracepoint data, display:              tdump.               (line   6)
* tracepoint deletion:                   Create and Delete Tracepoints.
                                                              (line  34)
* tracepoint number:                     Create and Delete Tracepoints.
                                                              (line  31)
* tracepoint packets:                    Tracepoint Packets.  (line   6)
* tracepoint pass count:                 Tracepoint Passcounts.
                                                              (line   6)
* tracepoint variables:                  Tracepoint Variables.
                                                              (line   6)
* tracepoints:                           Tracepoints.         (line   6)
* trailing underscore, in Fortran symbols: Fortran.           (line   9)
* translating between character sets:    Character Sets.      (line   6)
* transpose-chars (C-t):                 Commands For Text.   (line  30)
* transpose-words (M-t):                 Commands For Text.   (line  36)
* tstart:                                Starting and Stopping Trace Experiments.
                                                              (line   6)
* tstatus:                               Starting and Stopping Trace Experiments.
                                                              (line  20)
* tstop:                                 Starting and Stopping Trace Experiments.
                                                              (line  12)
* tty:                                   Input/Output.        (line  23)
* TUI:                                   TUI.                 (line   6)
* TUI commands:                          TUI Commands.        (line   6)
* TUI configuration variables:           TUI Configuration.   (line   6)
* TUI key bindings:                      TUI Keys.            (line   6)
* tui reg:                               TUI Commands.        (line  55)
* TUI single key mode:                   TUI Single Key Mode. (line   6)
* type casting memory:                   Expressions.         (line  42)
* type chain of a data type:             Maintenance Commands.
                                                              (line 191)
* type checking:                         Checks.              (line  31)
* type conversions in C++:               C Plus Plus Expressions.
                                                              (line  27)
* u (SingleKey TUI key):                 TUI Single Key Mode. (line  31)
* u (until):                             Continuing and Stepping.
                                                              (line 117)
* UDP port, target remote:               Connecting.          (line  49)
* undisplay:                             Auto Display.        (line  45)
* undo (C-_ or C-x C-u):                 Miscellaneous Commands.
                                                              (line  22)
* unions in structures, printing:        Print Settings.      (line 234)
* universal-argument ():                 Numeric Arguments.   (line  10)
* unix-filename-rubout ():               Commands For Killing.
                                                              (line  32)
* unix-line-discard (C-u):               Commands For Killing.
                                                              (line  12)
* unix-word-rubout (C-w):                Commands For Killing.
                                                              (line  28)
* unknown address, locating:             Output Formats.      (line  35)
* unlink, file-i/o system call:          unlink.              (line   6)
* unlinked object files:                 Files.               (line  26)
* unload symbols from shared libraries:  Files.               (line 339)
* unmap an overlay:                      Overlay Commands.    (line  39)
* unmapped overlays:                     How Overlays Work.   (line   6)
* unset environment:                     Environment.         (line  55)
* unset substitute-path:                 Source Path.         (line 143)
* unset tdesc filename:                  Retrieving Descriptions.
                                                              (line  21)
* unsupported languages:                 Unsupported Languages.
                                                              (line   6)
* until:                                 Continuing and Stepping.
                                                              (line 117)
* unwind stack in called functions:      Calling.             (line  26)
* Up:                                    TUI Keys.            (line  53)
* up:                                    Selection.           (line  35)
* up-silently:                           Selection.           (line  64)
* upcase-word (M-u):                     Commands For Text.   (line  41)
* update:                                TUI Commands.        (line  70)
* upload, M32R:                          M32R/D.              (line  34)
* use only software watchpoints:         Set Watchpoints.     (line  66)
* use_dbt_break:                         M32R/D.              (line  64)
* use_debug_dma:                         M32R/D.              (line  53)
* use_ib_break:                          M32R/D.              (line  61)
* use_mon_code:                          M32R/D.              (line  57)
* user-defined command:                  Define.              (line   6)
* user-defined macros:                   Macros.              (line  54)
* user-defined variables:                Convenience Vars.    (line   6)
* v (SingleKey TUI key):                 TUI Single Key Mode. (line  34)
* value history:                         Value History.       (line   6)
* value optimized out, in backtrace:     Backtrace.           (line  65)
* variable name conflict:                Variables.           (line  36)
* variable object debugging info:        Debugging Output.    (line 122)
* variable objects in GDB/MI:            GDB/MI Variable Objects.
                                                              (line   9)
* variable values, wrong:                Variables.           (line  58)
* variables, readline:                   Readline Init File Syntax.
                                                              (line  34)
* variables, setting:                    Assignment.          (line  16)
* vAttach packet:                        Packets.             (line 274)
* vCont packet:                          Packets.             (line 289)
* vCont? packet:                         Packets.             (line 315)
* vector unit:                           Vector Unit.         (line   6)
* vector, auxiliary:                     OS Information.      (line  21)
* verbose operation:                     Messages/Warnings.   (line   6)
* verify remote memory image:            Memory.              (line 105)
* vFile packet:                          Packets.             (line 326)
* vFlashDone packet:                     Packets.             (line 369)
* vFlashErase packet:                    Packets.             (line 330)
* vFlashWrite packet:                    Packets.             (line 347)
* virtual functions (C++) display:       Print Settings.      (line 362)
* visible-stats:                         Readline Init File Syntax.
                                                              (line 179)
* vRun packet:                           Packets.             (line 377)
* VTBL display:                          Print Settings.      (line 362)
* VxWorks:                               VxWorks.             (line   6)
* vxworks-timeout:                       VxWorks.             (line  23)
* w (SingleKey TUI key):                 TUI Single Key Mode. (line  37)
* watch:                                 Set Watchpoints.     (line  33)
* watchdog timer:                        Maintenance Commands.
                                                              (line 262)
* watchpoint annotation:                 Annotations for Running.
                                                              (line  50)
* watchpoints:                           Breakpoints.         (line  20)
* watchpoints and threads:               Set Watchpoints.     (line 149)
* weak alias functions:                  Calling.             (line  36)
* whatis:                                Symbols.             (line  66)
* where:                                 Backtrace.           (line  34)
* where to look for shared libraries:    Files.               (line 364)
* while:                                 Command Files.       (line  67)
* while-stepping (tracepoints):          Tracepoint Actions.  (line  67)
* wild pointer, interpreting:            Print Settings.      (line  79)
* winheight:                             TUI Commands.        (line  74)
* word completion:                       Completion.          (line   6)
* working directory:                     Source Path.         (line  99)
* working directory (of your program):   Working Directory.   (line   6)
* working language:                      Languages.           (line  13)
* write data into object, remote request: General Query Packets.
                                                              (line 520)
* write, file-i/o system call:           write.               (line   6)
* writing into corefiles:                Patching.            (line   6)
* writing into executables:              Patching.            (line   6)
* wrong values:                          Variables.           (line  58)
* x (examine memory):                    Memory.              (line   9)
* x command, default address:            Machine Code.        (line  29)
* X packet:                              Packets.             (line 394)
* x(examine), and info line:             Machine Code.        (line  29)
* x86 hardware debug registers:          Maintenance Commands.
                                                              (line 228)
* XInclude:                              Target Description Format.
                                                              (line  51)
* XML parser debugging:                  Debugging Output.    (line 130)
* yank (C-y):                            Commands For Killing.
                                                              (line  59)
* yank-last-arg (M-. or M-_):            Commands For History.
                                                              (line  64)
* yank-nth-arg (M-C-y):                  Commands For History.
                                                              (line  55)
* yank-pop (M-y):                        Commands For Killing.
                                                              (line  62)
* yanking text:                          Readline Killing Commands.
                                                              (line   6)
* z packet:                              Packets.             (line 407)
* Z packets:                             Packets.             (line 407)
* Z0 packet:                             Packets.             (line 422)
* z0 packet:                             Packets.             (line 422)
* Z1 packet:                             Packets.             (line 448)
* z1 packet:                             Packets.             (line 448)
* Z2 packet:                             Packets.             (line 469)
* z2 packet:                             Packets.             (line 469)
* Z3 packet:                             Packets.             (line 483)
* z3 packet:                             Packets.             (line 483)
* Z4 packet:                             Packets.             (line 497)
* z4 packet:                             Packets.             (line 497)
* Z8000:                                 Z8000.               (line   6)
* Zilog Z8000 simulator:                 Z8000.               (line   6)
* {TYPE}:                                Expressions.         (line  42)