perl patches: fix spaces errors in patch 0001

[msysgit.git] / bin / aclocal

#!/bin/perl -w
# -*- perl -*-
# Generated from aclocal.in; do not edit by hand.

eval 'case $# in 0) exec /bin/perl -S "$0";; *) exec /bin/perl -S "$0" "$@";; esac'
    if 0;

# aclocal - create aclocal.m4 by scanning configure.ac

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006  Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
# 02110-1301, USA.

# Written by Tom Tromey <tromey@redhat.com>, and
# Alexandre Duret-Lutz <adl@gnu.org>.

BEGIN
{
  my $perllibdir = $ENV{'perllibdir'} || '/usr/share/automake-1.10';
  unshift @INC, (split ':', $perllibdir);
}

use strict;

use Automake::Config;
use Automake::General;
use Automake::Configure_ac;
use Automake::Channels;
use Automake::ChannelDefs;
use Automake::XFile;
use Automake::FileUtils;
use File::Basename;
use File::stat;
use Cwd;

# Some globals.

# Include paths for searching macros.  We search macros in this order:
# user-supplied directories first, then the directory containing the
# automake macros, and finally the system-wide directories for
# third-party macro.  @user_includes can be augmented with -I.
# @system_includes can be augmented with the `dirlist' file.  Also
# --acdir will reset both @automake_includes and @system_includes.
my @user_includes = ();
my @automake_includes = ("/usr/share/aclocal-$APIVERSION");
my @system_includes = ('/usr/share/aclocal');

# Whether we should copy M4 file in $user_includes[0].
my $install = 0;

# --diff
my @diff_command;

# --dry-run
my $dry_run = 0;

# configure.ac or configure.in.
my $configure_ac;

# Output file name.
my $output_file = 'aclocal.m4';

# Option --force.
my $force_output = 0;

# Modification time of the youngest dependency.
my $greatest_mtime = 0;

# Which macros have been seen.
my %macro_seen = ();

# Remember the order into which we scanned the files.
# It's important to output the contents of aclocal.m4 in the opposite order.
# (Definitions in first files we have scanned should override those from
# later files.  So they must appear last in the output.)
my @file_order = ();

# Map macro names to file names.
my %map = ();

# Ditto, but records the last definition of each macro as returned by --trace.
my %map_traced_defs = ();

# Map basenames to macro names.
my %invmap = ();

# Map file names to file contents.
my %file_contents = ();

# Map file names to file types.
my %file_type = ();
use constant FT_USER => 1;
use constant FT_AUTOMAKE => 2;
use constant FT_SYSTEM => 3;

# Map file names to included files (transitively closed).
my %file_includes = ();

# Files which have already been added.
my %file_added = ();

# Files that have already been scanned.
my %scanned_configure_dep = ();

# Serial numbers, for files that have one.
# The key is the basename of the file,
# the value is the serial number represented as a list.
my %serial = ();

# Matches a macro definition.
#   AC_DEFUN([macroname], ...)
# or
#   AC_DEFUN(macroname, ...)
# When macroname is `['-quoted , we accept any character in the name,
# except `]'.  Otherwise macroname stops on the first `]', `,', `)',
# or `\n' encountered.
my $ac_defun_rx =
  "(?:AU_ALIAS|A[CU]_DEFUN|AC_DEFUN_ONCE)\\((?:\\[([^]]+)\\]|([^],)\n]+))";

# Matches an AC_REQUIRE line.
my $ac_require_rx = "AC_REQUIRE\\((?:\\[([^]]+)\\]|([^],)\n]+))\\)";

# Matches an m4_include line.
my $m4_include_rx = "(m4_|m4_s|s)include\\((?:\\[([^]]+)\\]|([^],)\n]+))\\)";

# Match a serial number.
my $serial_line_rx = '^#\s*serial\s+(\S*)';
my $serial_number_rx = '^\d+(?:\.\d+)*$';

# Autoconf version
# Set by trace_used_macros.
my $ac_version;

# If set, names a temporary file that must be erased on abnormal exit.
my $erase_me;
\f
################################################################

# Erase temporary file ERASE_ME.
sub unlink_tmp
{
  if (defined $erase_me && -e $erase_me && !unlink ($erase_me))
    {
      fatal "could not remove `$erase_me': $!";
    }
  undef $erase_me;
}

$SIG{'INT'} = $SIG{'TERM'} = $SIG{'QUIT'} = $SIG{'HUP'} = 'unlink_tmp';
END { unlink_tmp }

# Check macros in acinclude.m4.  If one is not used, warn.
sub check_acinclude ()
{
  foreach my $key (keys %map)
    {
      # FIXME: should print line number of acinclude.m4.
      msg ('syntax', "warning: macro `$key' defined in "
           . "acinclude.m4 but never used")
        if $map{$key} eq 'acinclude.m4' && ! exists $macro_seen{$key};
    }
}

sub reset_maps ()
{
  $greatest_mtime = 0;
  %macro_seen = ();
  @file_order = ();
  %map = ();
  %map_traced_defs = ();
  %file_contents = ();
  %file_type = ();
  %file_includes = ();
  %file_added = ();
  %scanned_configure_dep = ();
  %invmap = ();
  %serial = ();
  undef &search;
}

# install_file ($SRC, $DEST)
sub install_file ($$)
{
  my ($src, $dest) = @_;
  my $diff_dest;

  if ($force_output
      || !exists $file_contents{$dest}
      || $file_contents{$src} ne $file_contents{$dest})
    {
      if (-e $dest)
        {
          msg 'note', "overwriting `$dest' with `$src'";
          $diff_dest = $dest;
        }
      else
        {
          msg 'note', "installing `$dest' from `$src'";
        }

      if (@diff_command)
        {
          if (! defined $diff_dest)
            {
              # $dest does not exist.  We create an empty one just to
              # run diff, and we erase it afterward.  Using the real
              # the destination file (rather than a temporary file) is
              # good when diff is run with options that display the
              # file name.
              #
              # If creating $dest fails, fall back to /dev/null.  At
              # least one diff implementation (Tru64's) cannot deal
              # with /dev/null.  However working around this is not
              # worth the trouble since nobody run aclocal on a
              # read-only tree anyway.
              $erase_me = $dest;
              my $f = new IO::File "> $dest";
              if (! defined $f)
                {
                  undef $erase_me;
                  $diff_dest = '/dev/null';
                }
              else
                {
                  $diff_dest = $dest;
                  $f->close;
                }
            }
          my @cmd = (@diff_command, $diff_dest, $src);
          $! = 0;
          verb "running: @cmd";
          my $res = system (@cmd);
          Automake::FileUtils::handle_exec_errors "@cmd", 1
            if $res;
          unlink_tmp;
        }
      elsif (!$dry_run)
        {
          xsystem ('cp', $src, $dest);
        }
    }
}

# Compare two lists of numbers.
sub list_compare (\@\@)
{
  my @l = @{$_[0]};
  my @r = @{$_[1]};
  while (1)
    {
      if (0 == @l)
        {
          return (0 == @r) ? 0 : -1;
        }
      elsif (0 == @r)
        {
          return 1;
        }
      elsif ($l[0] < $r[0])
        {
          return -1;
        }
      elsif ($l[0] > $r[0])
        {
          return 1;
        }
      shift @l;
      shift @r;
    }
}

################################################################

# scan_m4_dirs($TYPE, @DIRS)
# --------------------------
# Scan all M4 files installed in @DIRS for new macro definitions.
# Register each file as of type $TYPE (one of the FT_* constants).
sub scan_m4_dirs ($@)
{
  my ($type, @dirlist) = @_;

  foreach my $m4dir (@dirlist)
    {
      if (! opendir (DIR, $m4dir))
        {
          fatal "couldn't open directory `$m4dir': $!";
        }

      # We reverse the directory contents so that foo2.m4 gets
      # used in preference to foo1.m4.
      foreach my $file (reverse sort grep (! /^\./, readdir (DIR)))
        {
          # Only examine .m4 files.
          next unless $file =~ /\.m4$/;

          # Skip some files when running out of srcdir.
          next if $file eq 'aclocal.m4';

          my $fullfile = File::Spec->canonpath ("$m4dir/$file");
            &scan_file ($type, $fullfile, 'aclocal');
        }
      closedir (DIR);
    }
}

# Scan all the installed m4 files and construct a map.
sub scan_m4_files ()
{
  # First, scan configure.ac.  It may contain macro definitions,
  # or may include other files that define macros.
  &scan_file (FT_USER, $configure_ac, 'aclocal');

  # Then, scan acinclude.m4 if it exists.
  if (-f 'acinclude.m4')
    {
      &scan_file (FT_USER, 'acinclude.m4', 'aclocal');
    }

  # Finally, scan all files in our search paths.
  scan_m4_dirs (FT_USER, @user_includes);
  scan_m4_dirs (FT_AUTOMAKE, @automake_includes);
  scan_m4_dirs (FT_SYSTEM, @system_includes);

  # Construct a new function that does the searching.  We use a
  # function (instead of just evaluating $search in the loop) so that
  # "die" is correctly and easily propagated if run.
  my $search = "sub search {\nmy \$found = 0;\n";
  foreach my $key (reverse sort keys %map)
    {
      $search .= ('if (/\b\Q' . $key . '\E(?!\w)/) { & add_macro ("' . $key
                  . '"); $found = 1; }' . "\n");
    }
  $search .= "return \$found;\n};\n";
  eval $search;
  prog_error "$@\n search is $search" if $@;
}

################################################################

# Add a macro to the output.
sub add_macro ($)
{
  my ($macro) = @_;

  # Ignore unknown required macros.  Either they are not really
  # needed (e.g., a conditional AC_REQUIRE), in which case aclocal
  # should be quiet, or they are needed and Autoconf itself will
  # complain when we trace for macro usage later.
  return unless defined $map{$macro};

  verb "saw macro $macro";
  $macro_seen{$macro} = 1;
  &add_file ($map{$macro});
}

# scan_configure_dep ($file)
# --------------------------
# Scan a configure dependency (configure.ac, or separate m4 files)
# for uses of known macros and AC_REQUIREs of possibly unknown macros.
# Recursively scan m4_included files.
sub scan_configure_dep ($)
{
  my ($file) = @_;
  # Do not scan a file twice.
  return ()
    if exists $scanned_configure_dep{$file};
  $scanned_configure_dep{$file} = 1;

  my $mtime = mtime $file;
  $greatest_mtime = $mtime if $greatest_mtime < $mtime;

  my $contents = exists $file_contents{$file} ?
    $file_contents{$file} : contents $file;

  my $line = 0;
  my @rlist = ();
  my @ilist = ();
  foreach (split ("\n", $contents))
    {
      ++$line;
      # Remove comments from current line.
      s/\bdnl\b.*$//;
      s/\#.*$//;
      # Avoid running all the following regexes on white lines.
      next if /^\s*$/;

      while (/$m4_include_rx/go)
        {
          my $ifile = $2 || $3;
          # Skip missing `sinclude'd files.
          next if $1 ne 'm4_' && ! -f $ifile;
          push @ilist, $ifile;
        }

      while (/$ac_require_rx/go)
        {
          push (@rlist, $1 || $2);
        }

      # The search function is constructed dynamically by
      # scan_m4_files.  The last parenthetical match makes sure we
      # don't match things that look like macro assignments or
      # AC_SUBSTs.
      if (! &search && /(^|\s+)(AM_[A-Z0-9_]+)($|[^\]\)=A-Z0-9_])/)
        {
          # Macro not found, but AM_ prefix found.
          # Make this just a warning, because we do not know whether
          # the macro is actually used (it could be called conditionally).
          msg ('unsupported', "$file:$line",
               "warning: macro `$2' not found in library");
        }
    }

  add_macro ($_) foreach (@rlist);
  &scan_configure_dep ($_) foreach @ilist;
}

# add_file ($FILE)
# ----------------
# Add $FILE to output.
sub add_file ($)
{
  my ($file) = @_;

  # Only add a file once.
  return if ($file_added{$file});
  $file_added{$file} = 1;

  scan_configure_dep $file;
}

# Point to the documentation for underquoted AC_DEFUN only once.
my $underquoted_manual_once = 0;

# scan_file ($TYPE, $FILE, $WHERE)
# --------------------------------
# Scan a single M4 file ($FILE), and all files it includes.
# Return the list of included files.
# $TYPE is one of FT_USER, FT_AUTOMAKE, or FT_SYSTEM, depending
# on where the file comes from.
# $WHERE is the location to use in the diagnostic if the file
# does not exist.
sub scan_file ($$$)
{
  my ($type, $file, $where) = @_;
  my $basename = basename $file;

  # Do not scan the same file twice.
  return @{$file_includes{$file}} if exists $file_includes{$file};
  # Prevent potential infinite recursion (if two files include each other).
  return () if exists $file_contents{$file};

  unshift @file_order, $file;

  $file_type{$file} = $type;

  fatal "$where: file `$file' does not exist" if ! -e $file;

  my $fh = new Automake::XFile $file;
  my $contents = '';
  my @inc_files = ();
  my %inc_lines = ();

  my $defun_seen = 0;
  my $serial_seen = 0;
  my $serial_older = 0;

  while ($_ = $fh->getline)
    {
      # Ignore `##' lines.
      next if /^##/;

      $contents .= $_;
      my $line = $_;

      if ($line =~ /$serial_line_rx/go)
        {
          my $number = $1;
          if ($number !~ /$serial_number_rx/go)
            {
              msg ('syntax', "$file:$.",
                   "warning: ill-formed serial number `$number', "
                   . "expecting a version string with only digits and dots");
            }
          elsif ($defun_seen)
            {
              # aclocal removes all definitions from M4 file with the
              # same basename if a greater serial number is found.
              # Encountering a serial after some macros will undefine
              # these macros...
              msg ('syntax', "$file:$.",
                   'the serial number must appear before any macro definition');
            }
          # We really care about serials only for non-automake macros
          # and when --install is used.  But the above diagnostics are
          # made regardless of this, because not using --install is
          # not a reason not the fix macro files.
          elsif ($install && $type != FT_AUTOMAKE)
            {
              $serial_seen = 1;
              my @new = split (/\./, $number);

              verb "$file:$.: serial $number";

              if (!exists $serial{$basename}
                  || list_compare (@new, @{$serial{$basename}}) > 0)
                {
                  # Delete any definition we knew from the old macro.
                  foreach my $def (@{$invmap{$basename}})
                    {
                      verb "$file:$.: ignoring previous definition of $def";
                      delete $map{$def};
                    }
                  $invmap{$basename} = [];
                  $serial{$basename} = \@new;
                }
              else
                {
                  $serial_older = 1;
                }
            }
        }

      # Remove comments from current line.
      # Do not do it earlier, because the serial line is a comment.
      $line =~ s/\bdnl\b.*$//;
      $line =~ s/\#.*$//;

      while ($line =~ /$ac_defun_rx/go)
        {
          $defun_seen = 1;
          if (! defined $1)
            {
              msg ('syntax', "$file:$.", "warning: underquoted definition of $2"
                   . "\n  run info '(automake)Extending aclocal'\n"
                   . "  or see http://sources.redhat.com/automake/"
                   . "automake.html#Extending-aclocal")
                unless $underquoted_manual_once;
              $underquoted_manual_once = 1;
            }

          # If this macro does not have a serial and we have already
          # seen a macro with the same basename earlier, we should
          # ignore the macro (don't exit immediately so we can still
          # diagnose later #serial numbers and underquoted macros).
          $serial_older ||= ($type != FT_AUTOMAKE
                             && !$serial_seen && exists $serial{$basename});

          my $macro = $1 || $2;
          if (!$serial_older && !defined $map{$macro})
            {
              verb "found macro $macro in $file: $.";
              $map{$macro} = $file;
              push @{$invmap{$basename}}, $macro;
            }
          else
            {
              # Note: we used to give an error here if we saw a
              # duplicated macro.  However, this turns out to be
              # extremely unpopular.  It causes actual problems which
              # are hard to work around, especially when you must
              # mix-and-match tool versions.
              verb "ignoring macro $macro in $file: $.";
            }
        }

      while ($line =~ /$m4_include_rx/go)
        {
          my $ifile = $2 || $3;
          # Skip missing `sinclude'd files.
          next if $1 ne 'm4_' && ! -f $ifile;
          push (@inc_files, $ifile);
          $inc_lines{$ifile} = $.;
        }
    }

  # Ignore any file that has an old serial (or no serial if we know
  # another one with a serial).
  return ()
    if ($serial_older ||
        ($type != FT_AUTOMAKE && !$serial_seen && exists $serial{$basename}));

  $file_contents{$file} = $contents;

  # For some reason I don't understand, it does not work
  # to do `map { scan_file ($_, ...) } @inc_files' below.
  # With Perl 5.8.2 it undefines @inc_files.
  my @copy = @inc_files;
  my @all_inc_files = (@inc_files,
                       map { scan_file ($type, $_,
                                        "$file:$inc_lines{$_}") } @copy);
  $file_includes{$file} = \@all_inc_files;
  return @all_inc_files;
}

# strip_redundant_includes (%FILES)
# ---------------------------------
# Each key in %FILES is a file that must be present in the output.
# However some of these files might already include other files in %FILES,
# so there is no point in including them another time.
# This removes items of %FILES which are already included by another file.
sub strip_redundant_includes (%)
{
  my %files = @_;

  # Always include acinclude.m4, even if it does not appear to be used.
  $files{'acinclude.m4'} = 1 if -f 'acinclude.m4';
  # File included by $configure_ac are redundant.
  $files{$configure_ac} = 1;

  # Files at the end of @file_order should override those at the beginning,
  # so it is important to preserve these trailing files.  We can remove
  # a file A if it is going to be output before a file B that includes
  # file A, not the converse.
  foreach my $file (reverse @file_order)
    {
      next unless exists $files{$file};
      foreach my $ifile (@{$file_includes{$file}})
        {
          next unless exists $files{$ifile};
          delete $files{$ifile};
          verb "$ifile is already included by $file";
        }
    }

  # configure.ac is implicitly included.
  delete $files{$configure_ac};

  return %files;
}

sub trace_used_macros ()
{
  my %files = map { $map{$_} => 1 } keys %macro_seen;
  %files = strip_redundant_includes %files;

  my $traces = ($ENV{AUTOM4TE} || 'autom4te');
  $traces .= " --language Autoconf-without-aclocal-m4 ";
  # All candidate files.
  $traces .= join (' ', grep { exists $files{$_} } @file_order) . " ";
  # All candidate macros.
  $traces .= join (' ',
                   (map { "--trace='$_:\$f::\$n::\$1'" }
                    ('AC_DEFUN',
                     'AC_DEFUN_ONCE',
                     'AU_DEFUN',
                     '_AM_AUTOCONF_VERSION')),
                   # Do not trace $1 for all other macros as we do
                   # not need it and it might contains harmful
                   # characters (like newlines).
                   (map { "--trace='$_:\$f::\$n'" } (keys %macro_seen)));

  verb "running $traces $configure_ac";

  my $tracefh = new Automake::XFile ("$traces $configure_ac |");

  my %traced = ();

  while ($_ = $tracefh->getline)
    {
      chomp;
      my ($file, $macro, $arg1) = split (/::/);

      $traced{$macro} = 1 if exists $macro_seen{$macro};

      $map_traced_defs{$arg1} = $file
        if ($macro eq 'AC_DEFUN'
            || $macro eq 'AC_DEFUN_ONCE'
            || $macro eq 'AU_DEFUN');

      $ac_version = $arg1 if $macro eq '_AM_AUTOCONF_VERSION';
    }

  $tracefh->close;

  return %traced;
}

sub scan_configure ()
{
  # Make sure we include acinclude.m4 if it exists.
  if (-f 'acinclude.m4')
    {
      add_file ('acinclude.m4');
    }
  scan_configure_dep ($configure_ac);
}

################################################################

# Write output.
# Return 0 iff some files were installed locally.
sub write_aclocal ($@)
{
  my ($output_file, @macros) = @_;
  my $output = '';

  my %files = ();
  # Get the list of files containing definitions for the macros used.
  # (Filter out unused macro definitions with $map_traced_defs.  This
  # can happen when an Autoconf macro is conditionally defined:
  # aclocal sees the potential definition, but this definition is
  # actually never processed and the Autoconf implementation is used
  # instead.)
  for my $m (@macros)
    {
      $files{$map{$m}} = 1
        if (exists $map_traced_defs{$m}
            && $map{$m} eq $map_traced_defs{$m});
    }
  # Do not explicitly include a file that is already indirectly included.
  %files = strip_redundant_includes %files;

  my $installed = 0;

  for my $file (grep { exists $files{$_} } @file_order)
    {
      # Check the time stamp of this file, and of all files it includes.
      for my $ifile ($file, @{$file_includes{$file}})
        {
          my $mtime = mtime $ifile;
          $greatest_mtime = $mtime if $greatest_mtime < $mtime;
        }

      # If the file to add looks like outside the project, copy it
      # to the output.  The regex catches filenames starting with
      # things like `/', `\', or `c:\'.
      if ($file_type{$file} != FT_USER
          || $file =~ m,^(?:\w:)?[\\/],)
        {
          if (!$install || $file_type{$file} != FT_SYSTEM)
            {
              # Copy the file into aclocal.m4.
              $output .= $file_contents{$file} . "\n";
            }
          else
            {
              # Install the file (and any file it includes).
              my $dest;
              for my $ifile (@{$file_includes{$file}}, $file)
                {
                  $dest = "$user_includes[0]/" . basename $ifile;
                  verb "installing $ifile to $dest";
                  install_file ($ifile, $dest);
                }
              $installed = 1;
            }
        }
      else
        {
          # Otherwise, simply include the file.
          $output .= "m4_include([$file])\n";
        }
    }

  if ($installed)
    {
      verb "running aclocal anew, because some files were installed locally";
      return 0;
    }

  # Nothing to output?!
  # FIXME: Shouldn't we diagnose this?
  return 1 if ! length ($output);

  if ($ac_version)
    {
      # Do not use "$output_file" here for the same reason we do not
      # use it in the header below.  autom4te will output the name of
      # the file in the diagnostic anyway.
      $output = "m4_if(m4_PACKAGE_VERSION, [$ac_version],,
[m4_fatal([this file was generated for autoconf $ac_version.
You have another version of autoconf.  If you want to use that,
you should regenerate the build system entirely.], [63])])

$output";
    }

  # We used to print `# $output_file generated automatically etc.'  But
  # this creates spurious differences when using autoreconf.  Autoreconf
  # creates aclocal.m4t and then rename it to aclocal.m4, but the
  # rebuild rules generated by Automake create aclocal.m4 directly --
  # this would gives two ways to get the same file, with a different
  # name in the header.
  $output = "# generated automatically by aclocal $VERSION -*- Autoconf -*-

# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
# 2005, 2006  Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

$output";

  # We try not to update $output_file unless necessary, because
  # doing so invalidate Autom4te's cache and therefore slows down
  # tools called after aclocal.
  #
  # We need to overwrite $output_file in the following situations.
  #   * The --force option is in use.
  #   * One of the dependencies is younger.
  #     (Not updating $output_file in this situation would cause
  #     make to call aclocal in loop.)
  #   * The contents of the current file are different from what
  #     we have computed.
  if (!$force_output
      && $greatest_mtime < mtime ($output_file)
      && $output eq contents ($output_file))
    {
      verb "$output_file unchanged";
      return 1;
    }

  verb "writing $output_file";

  if (!$dry_run)
    {
      if (-e $output_file && !unlink $output_file)
        {
          fatal "could not remove `$output_file': $!";
        }
      my $out = new Automake::XFile "> $output_file";
      print $out $output;
    }
  return 1;
}

################################################################

# Print usage and exit.
sub usage ($)
{
  my ($status) = @_;

  print "Usage: aclocal [OPTIONS] ...

Generate `aclocal.m4' by scanning `configure.ac' or `configure.in'

Options:
      --acdir=DIR           directory holding config files (for debugging)
      --diff[=COMMAND]      run COMMAND [diff -u] on M4 files that would be
                              changed (implies --install and --dry-run)
      --dry-run             pretend to, but do not actually update any file
      --force               always update output file
      --help                print this help, then exit
  -I DIR                    add directory to search list for .m4 files
      --install             copy third-party files to the first -I directory
      --output=FILE         put output in FILE (default aclocal.m4)
      --print-ac-dir        print name of directory holding m4 files, then exit
      --verbose             don't be silent
      --version             print version number, then exit
  -W, --warnings=CATEGORY   report the warnings falling in CATEGORY

Warning categories include:
  `syntax'        dubious syntactic constructs (default)
  `unsupported'   unknown macros (default)
  `all'           all the warnings (default)
  `no-CATEGORY'   turn off warnings in CATEGORY
  `none'          turn off all the warnings
  `error'         treat warnings as errors

Report bugs to <bug-automake\@gnu.org>.\n";

  exit $status;
}

# Print version and exit.
sub version()
{
  print <<EOF;
aclocal (GNU $PACKAGE) $VERSION
Written by Tom Tromey <tromey\@redhat.com>
       and Alexandre Duret-Lutz <adl\@gnu.org>.

Copyright (C) 2006 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
EOF
  exit 0;
}

# Parse command line.
sub parse_arguments ()
{
  my $print_and_exit = 0;
  my $diff_command;

  my %cli_options =
    (
     'acdir=s'          => sub # Setting --acdir overrides both the
                             { # automake (versioned) directory and the
                               # public (unversioned) system directory.
                               @automake_includes = ();
                               @system_includes = ($_[1])
                             },
     'diff:s'           => \$diff_command,
     'dry-run'          => \$dry_run,
     'force'            => \$force_output,
     'I=s'              => \@user_includes,
     'install'          => \$install,
     'output=s'         => \$output_file,
     'print-ac-dir'     => \$print_and_exit,
     'verbose'          => sub { setup_channel 'verb', silent => 0; },
     'W|warnings=s'     => \&parse_warnings,
     );
  use Getopt::Long;
  Getopt::Long::config ("bundling", "pass_through");

  # See if --version or --help is used.  We want to process these before
  # anything else because the GNU Coding Standards require us to
  # `exit 0' after processing these options, and we can't guarantee this
  # if we treat other options first.  (Handling other options first
  # could produce error diagnostics, and in this condition it is
  # confusing if aclocal does `exit 0'.)
  my %cli_options_1st_pass =
    (
     'version' => \&version,
     'help'    => sub { usage(0); },
     # Recognize all other options (and their arguments) but do nothing.
     map { $_ => sub {} } (keys %cli_options)
     );
  my @ARGV_backup = @ARGV;
  Getopt::Long::GetOptions %cli_options_1st_pass
    or exit 1;
  @ARGV = @ARGV_backup;

  # Now *really* process the options.  This time we know that --help
  # and --version are not present, but we specify them nonetheless so
  # that ambiguous abbreviation are diagnosed.
  Getopt::Long::GetOptions %cli_options, 'version' => sub {}, 'help' => sub {}
    or exit 1;

  if (@ARGV)
    {
      my %argopts;
      for my $k (keys %cli_options)
        {
          if ($k =~ /(.*)=s$/)
            {
              map { $argopts{(length ($_) == 1)
                             ? "-$_" : "--$_" } = 1; } (split (/\|/, $1));
            }
        }
      if (exists $argopts{$ARGV[0]})
        {
          fatal ("option `$ARGV[0]' requires an argument\n"
                 . "Try `$0 --help' for more information.");
        }
      else
        {
          fatal ("unrecognized option `$ARGV[0]'\n"
                 . "Try `$0 --help' for more information.");
        }
    }

  if ($print_and_exit)
    {
      print "@system_includes\n";
      exit 0;
    }

  if (defined $diff_command)
    {
      $diff_command = 'diff -u' if $diff_command eq '';
      @diff_command = split (' ', $diff_command);
      $install = 1;
      $dry_run = 1;
    }

  if ($install && !@user_includes)
    {
      fatal ("--install should copy macros in the directory indicated by the"
             . "\nfirst -I option, but no -I was supplied.");
    }

  if (! -d $system_includes[0])
    {
      # By default $(datadir)/aclocal doesn't exist.  We don't want to
      # get an error in the case where we are searching the default
      # directory and it hasn't been created.  (We know
      # @system_includes has its default value if @automake_includes
      # is not empty, because --acdir is the only way to change this.)
      @system_includes = () if @automake_includes;
    }
  else
    {
      # Finally, adds any directory listed in the `dirlist' file.
      if (open (DIRLIST, "$system_includes[0]/dirlist"))
        {
          while (<DIRLIST>)
            {
              # Ignore '#' lines.
              next if /^#/;
              # strip off newlines and end-of-line comments
              s/\s*\#.*$//;
              chomp;
              foreach my $dir (glob)
                {
                  push (@system_includes, $dir) if -d $dir;
                }
            }
          close (DIRLIST);
        }
    }
}

################################################################

parse_WARNINGS;             # Parse the WARNINGS environment variable.
parse_arguments;
$configure_ac = require_configure_ac;

# We may have to rerun aclocal if some file have been installed, but
# it should not happen more than once.  The reason we must run again
# is that once the file has been moved from /usr/share/aclocal/ to the
# local m4/ directory it appears at a new place in the search path,
# hence it should be output at a different position in aclocal.m4.  If
# we did not rerun aclocal, the next run of aclocal would produce a
# different aclocal.m4.
my $loop = 0;
while (1)
  {
    ++$loop;
    prog_error "Too many loops." if $loop > 2;

    reset_maps;
    scan_m4_files;
    scan_configure;
    last if $exit_code;
    my %macro_traced = trace_used_macros;
    last if write_aclocal ($output_file, keys %macro_traced);
    last if $dry_run;
  }
check_acinclude;

exit $exit_code;

### Setup "GNU" style for perl-mode and cperl-mode.
## Local Variables:
## perl-indent-level: 2
## perl-continued-statement-offset: 2
## perl-continued-brace-offset: 0
## perl-brace-offset: 0
## perl-brace-imaginary-offset: 0
## perl-label-offset: -2
## cperl-indent-level: 2
## cperl-brace-offset: 0
## cperl-continued-brace-offset: 0
## cperl-label-offset: -2
## cperl-extra-newline-before-brace: t
## cperl-merge-trailing-else: nil
## cperl-continued-statement-offset: 2
## End: