Try to detect broken files with unaligned chunks.
[mplayer/greg.git] / vidix / s3_regs.h
blobc696fae1872a60218a6eccb3cdf25c1565f26cb2
1 /*
2 * S3 chipsets registers definition.
4 * Copyright (C) 2004 Reza Jelveh
5 * Thanks to Alex Deucher for Support
6 * Trio/Virge support by Michael Kostylev
8 * This file is part of MPlayer.
10 * MPlayer is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * MPlayer is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
20 * You should have received a copy of the GNU General Public License along
21 * with MPlayer; if not, write to the Free Software Foundation, Inc.,
22 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
25 #ifndef MPLAYER_SAVAGE_REGS_H
26 #define MPLAYER_SAVAGE_REGS_H
28 #define S3_SAVAGE3D_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE_MX))
29 #define S3_SAVAGE4_SERIES(chip) ((chip==S3_SAVAGE4) || (chip==S3_PROSAVAGE))
30 #define S3_SAVAGE_MOBILE_SERIES(chip) ((chip==S3_SAVAGE_MX) || (chip==S3_SUPERSAVAGE))
31 #define S3_SAVAGE_SERIES(chip) ((chip>=S3_SAVAGE3D) && (chip<=S3_SAVAGE2000))
34 * Chip tags. These are used to group the adapters into
35 * related families.
37 enum S3CHIPTAGS {
38 S3_UNKNOWN = 0,
39 S3_TRIO64V,
40 S3_VIRGE,
41 S3_SAVAGE3D,
42 S3_SAVAGE_MX,
43 S3_SAVAGE4,
44 S3_PROSAVAGE,
45 S3_SUPERSAVAGE,
46 S3_SAVAGE2000,
47 S3_LAST
50 #define BIOS_BSIZE 1024
51 #define BIOS_BASE 0xc0000
53 #define S3_NEWMMIO_REGBASE 0x1000000 /* 16MB */
54 #define S3_NEWMMIO_REGSIZE 0x0010000 /* 64KB */
55 #define S3_NEWMMIO_REGSIZE_SAVAGE 0x0080000 /* 512KB */
57 #define BASE_FREQ 14.31818
60 * There are two different streams engines used in the S3 line.
61 * The old engine is in the Trio64, Virge,
62 * Savage3D, Savage4, SavagePro, and SavageTwister.
63 * The new engine is in the Savage2000, SavageMX,
64 * SavageIX, and SuperSavage.
67 /* Old engine registers */
68 #define PSTREAM_CONTROL_REG 0x8180
69 #define COL_CHROMA_KEY_CONTROL_REG 0x8184
70 #define SSTREAM_CONTROL_REG 0x8190
71 #define CHROMA_KEY_UPPER_BOUND_REG 0x8194
72 #define SSTREAM_STRETCH_REG 0x8198
73 #define COLOR_ADJUSTMENT_REG 0x819C
74 #define BLEND_CONTROL_REG 0x81A0
75 #define PSTREAM_FBADDR0_REG 0x81C0
76 #define PSTREAM_FBADDR1_REG 0x81C4
77 #define PSTREAM_STRIDE_REG 0x81C8
78 #define DOUBLE_BUFFER_REG 0x81CC
79 #define SSTREAM_FBADDR0_REG 0x81D0
80 #define SSTREAM_FBADDR1_REG 0x81D4
81 #define SSTREAM_STRIDE_REG 0x81D8
82 #define OPAQUE_OVERLAY_CONTROL_REG 0x81DC
83 #define K1_VSCALE_REG 0x81E0
84 #define SSTREAM_VSCALE_REG 0x81E0
85 #define K2_VSCALE_REG 0x81E4
86 #define SSTREAM_VINITIAL_REG 0x81E4
87 #define DDA_VERT_REG 0x81E8
88 #define SSTREAM_LINES_REG 0x81E8
89 #define STREAMS_FIFO_REG 0x81EC
90 #define PSTREAM_WINDOW_START_REG 0x81F0
91 #define PSTREAM_WINDOW_SIZE_REG 0x81F4
92 #define SSTREAM_WINDOW_START_REG 0x81F8
93 #define SSTREAM_WINDOW_SIZE_REG 0x81FC
94 #define FIFO_CONTROL 0x8200
95 #define PSTREAM_FBSIZE_REG 0x8300
96 #define SSTREAM_FBSIZE_REG 0x8304
97 #define SSTREAM_FBADDR2_REG 0x8308
99 /* New engine registers */
100 #define PRI_STREAM_FBUF_ADDR0 0x81c0
101 #define PRI_STREAM_FBUF_ADDR1 0x81c4
102 #define PRI_STREAM_STRIDE 0x81c8
103 #define PRI_STREAM_BUFFERSIZE 0x8214
104 #define SEC_STREAM_CKEY_LOW 0x8184
105 #define SEC_STREAM_CKEY_UPPER 0x8194
106 #define BLEND_CONTROL 0x8190
107 #define SEC_STREAM_COLOR_CONVERT1 0x8198
108 #define SEC_STREAM_COLOR_CONVERT2 0x819c
109 #define SEC_STREAM_COLOR_CONVERT3 0x81e4
110 #define SEC_STREAM_HSCALING 0x81a0
111 #define SEC_STREAM_BUFFERSIZE 0x81a8
112 #define SEC_STREAM_HSCALE_NORMALIZE 0x81ac
113 #define SEC_STREAM_VSCALING 0x81e8
114 #define SEC_STREAM_FBUF_ADDR0 0x81d0
115 #define SEC_STREAM_FBUF_ADDR1 0x81d4
116 #define SEC_STREAM_FBUF_ADDR2 0x81ec
117 #define SEC_STREAM_STRIDE 0x81d8
118 #define SEC_STREAM_WINDOW_START 0x81f8
119 #define SEC_STREAM_WINDOW_SZ 0x81fc
120 #define SEC_STREAM_TILE_OFF 0x821c
121 #define SEC_STREAM_OPAQUE_OVERLAY 0x81dc
123 /* Savage 2000 registers */
124 #define SEC_STREAM_COLOR_CONVERT0_2000 0x8198
125 #define SEC_STREAM_COLOR_CONVERT1_2000 0x819c
126 #define SEC_STREAM_COLOR_CONVERT2_2000 0x81e0
127 #define SEC_STREAM_COLOR_CONVERT3_2000 0x81e4
129 /* Virge+ registers */
130 #define FIFO_CONTROL_REG 0x8200
131 #define MIU_CONTROL_REG 0x8204
132 #define STREAMS_TIMEOUT_REG 0x8208
133 #define MISC_TIMEOUT_REG 0x820c
135 /* VGA stuff */
136 #define vgaCRIndex 0x3d4
137 #define vgaCRReg 0x3d5
139 /* CRT Control registers */
140 #define EXT_MEM_CTRL1 0x53
141 #define LIN_ADDR_CTRL 0x58
142 #define EXT_MISC_CTRL2 0x67
144 /* Old engine constants */
145 #define ENABLE_NEWMMIO 0x08
146 #define ENABLE_LFB 0x10
147 #define ENABLE_STREAMS_OLD 0x0c
148 #define NO_STREAMS_OLD 0xf3
150 /* New engine constants */
151 #define ENABLE_STREAM1 0x04
152 #define NO_STREAMS 0xF9
154 #define VerticalRetraceWait() \
155 do { \
156 VGAIN8(0x3d4); \
157 VGAOUT8(0x3d4, 0x17); \
158 if (VGAIN8(0x3d5) & 0x80) { \
159 int i = 0x10000; \
160 while ((VGAIN8(0x3da) & 0x08) == 0x08 && i--) ; \
161 i = 0x10000; \
162 while ((VGAIN8(0x3da) & 0x08) == 0x00 && i--) ; \
164 } while (0)
166 /* Scaling operations */
167 #define HSCALING_Shift 0
168 #define HSCALING_Mask (((1L << 16)-1) << HSCALING_Shift)
169 #define HSCALING(w0,w1) ((((unsigned int)(((double)w0/(double)w1) * (1 << 15))) << HSCALING_Shift) & HSCALING_Mask)
171 #define VSCALING_Shift 0
172 #define VSCALING_Mask (((1L << 20)-1) << VSCALING_Shift)
173 #define VSCALING(h0,h1) ((((unsigned int) (((double)h0/(double)h1) * (1 << 15))) << VSCALING_Shift) & VSCALING_Mask)
175 /* Scaling factors */
176 #define HDM_SHIFT 16
177 #define HDSCALE_4 (2 << HDM_SHIFT)
178 #define HDSCALE_8 (3 << HDM_SHIFT)
179 #define HDSCALE_16 (4 << HDM_SHIFT)
180 #define HDSCALE_32 (5 << HDM_SHIFT)
181 #define HDSCALE_64 (6 << HDM_SHIFT)
183 /* Window parameters */
184 #define OS_XY(x,y) (((x+1)<<16)|(y+1))
185 #define OS_WH(x,y) (((x-1)<<16)|(y))
187 /* PCI stuff */
189 /* PCI-Memory IO access macros. */
190 #define VID_WR08(p,i,val) (((uint8_t *)(p))[(i)]=(val))
191 #define VID_RD08(p,i) (((uint8_t *)(p))[(i)])
193 #define VID_WR32(p,i,val) (((uint32_t *)(p))[(i)/4]=(val))
194 #define VID_RD32(p,i) (((uint32_t *)(p))[(i)/4])
196 #ifndef USE_RMW_CYCLES
198 /* Can be used to inhibit READ-MODIFY-WRITE cycles. On by default. */
199 #define MEM_BARRIER() __asm__ volatile ("" : : : "memory")
201 #undef VID_WR08
202 #define VID_WR08(p,i,val) ({ MEM_BARRIER(); ((uint8_t *)(p))[(i)]=(val); })
203 #undef VID_RD08
204 #define VID_RD08(p,i) ({ MEM_BARRIER(); ((uint8_t *)(p))[(i)]; })
206 #undef VID_WR16
207 #define VID_WR16(p,i,val) ({ MEM_BARRIER(); ((uint16_t *)(p))[(i)/2]=(val); })
208 #undef VID_RD16
209 #define VID_RD16(p,i) ({ MEM_BARRIER(); ((uint16_t *)(p))[(i)/2]; })
211 #undef VID_WR32
212 #define VID_WR32(p,i,val) ({ MEM_BARRIER(); ((uint32_t *)(p))[(i)/4]=(val); })
213 #undef VID_RD32
214 #define VID_RD32(p,i) ({ MEM_BARRIER(); ((uint32_t *)(p))[(i)/4]; })
215 #endif /* USE_RMW_CYCLES */
217 #define VID_AND32(p,i,val) VID_WR32(p,i,VID_RD32(p,i)&(val))
218 #define VID_OR32(p,i,val) VID_WR32(p,i,VID_RD32(p,i)|(val))
219 #define VID_XOR32(p,i,val) VID_WR32(p,i,VID_RD32(p,i)^(val))
221 #define VGAIN8(addr) VID_RD08(info->control_base+0x8000, addr)
222 #define VGAIN16(addr) VID_RD16(info->control_base+0x8000, addr)
223 #define VGAIN(addr) VID_RD32(info->control_base+0x8000, addr)
225 #define VGAOUT8(addr,val) VID_WR08(info->control_base+0x8000, addr, val)
226 #define VGAOUT16(addr,val) VID_WR16(info->control_base+0x8000, addr, val)
227 #define VGAOUT(addr,val) VID_WR32(info->control_base+0x8000, addr, val)
229 #define INREG(addr) VID_RD32(info->control_base, addr)
230 #define OUTREG(addr,val) VID_WR32(info->control_base, addr, val)
231 #define INREG8(addr) VID_RD08(info->control_base, addr)
232 #define OUTREG8(addr,val) VID_WR08(info->control_base, addr, val)
233 #define INREG16(addr) VID_RD16(info->control_base, addr)
234 #define OUTREG16(addr,val) VID_WR16(info->control_base, addr, val)
236 #define ALIGN_TO(v, n) (((v) + (n-1)) & ~(n-1))
238 #endif /* MPLAYER_S3_REGS_H */