1 # ***** BEGIN LICENSE BLOCK *****
2 # Version: MPL 1.1/GPL 2.0/LGPL 2.1
4 # The contents of this file are subject to the Mozilla Public License Version
5 # 1.1 (the "License"); you may not use this file except in compliance with
6 # the License. You may obtain a copy of the License at
7 # http://www.mozilla.org/MPL/
9 # Software distributed under the License is distributed on an "AS IS" basis,
10 # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
11 # for the specific language governing rights and limitations under the
14 # The Original Code is mozilla.org code.
16 # The Initial Developer of the Original Code is
17 # Netscape Communications Corporation.
18 # Portions created by the Initial Developer are Copyright (C) 1998
19 # the Initial Developer. All Rights Reserved.
23 # Benjamin Smedberg <bsmedberg@covad.net>
24 # Chase Phillips <chase@mozilla.org>
25 # Mark Mentovai <mark@moxienet.com>
27 # Alternatively, the contents of this file may be used under the terms of
28 # either the GNU General Public License Version 2 or later (the "GPL"), or
29 # the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
30 # in which case the provisions of the GPL or the LGPL are applicable instead
31 # of those above. If you wish to allow use of your version of this file only
32 # under the terms of either the GPL or the LGPL, and not to allow others to
33 # use your version of this file under the terms of the MPL, indicate your
34 # decision by deleting the provisions above and replace them with the notice
35 # and other provisions required by the GPL or the LGPL. If you do not delete
36 # the provisions above, a recipient may use your version of this file under
37 # the terms of any one of the MPL, the GPL or the LGPL.
39 # ***** END LICENSE BLOCK *****
41 # Build a mozilla application.
44 # 1. hg clone ssh://hg.mozilla.org/mozilla-central mozilla
46 # 3. create your .mozconfig file with
47 # mk_add_options MOZ_CO_PROJECT=
49 # 4. gmake -f client.mk
51 # Other targets (gmake -f client.mk [targets...]),
53 # clean (realclean is now the same as clean)
56 # See http://developer.mozilla.org/en/docs/Build_Documentation for
60 # MOZ_BUILD_PROJECTS - Build multiple projects in subdirectories
62 # MOZ_OBJDIR - Destination object directory
63 # MOZ_MAKE_FLAGS - Flags to pass to $(MAKE)
64 # MOZ_PREFLIGHT_ALL } - Makefiles to run before any project in
65 # MOZ_PREFLIGHT } MOZ_BUILD_PROJECTS, before each project, after
66 # MOZ_POSTFLIGHT } each project, and after all projects; these
67 # MOZ_POSTFLIGHT_ALL } variables contain space-separated lists
68 # MOZ_UNIFY_BDATE - Set to use the same bdate for each project in
71 #######################################################################
78 ifneq (1,$(words $(CWD
)))
79 $(error The mozilla directory cannot be located in a path with spaces.
)
87 ifeq (,$(wildcard client.mk
))
88 $(error Must run from the client.mk directory
, or specify TOPSRCDIR
)
93 ifeq (Darwin
,$(shell uname
-s
))
94 AUTOCONF ?
= autoconf213
96 AUTOCONF ?
= autoconf-2.13
107 RUN_AUTOCONF_LOCALLY
= 1
108 CONFIG_GUESS_SCRIPT
:= $(wildcard $(TOPSRCDIR
)/build
/autoconf
/config.guess
)
109 ifdef CONFIG_GUESS_SCRIPT
110 CONFIG_GUESS
= $(shell $(CONFIG_GUESS_SCRIPT
))
114 ####################################
117 ifneq (,$(filter MINGW
%,$(shell uname
-s
)))
118 # check for CRLF line endings
119 ifneq (0,$(shell $(PERL
) -e
'binmode(STDIN); while (<STDIN>) { if (/\r/) { print "1"; exit } } print "0"' < $(TOPSRCDIR
)/client.mk
))
120 $(error This source tree appears to have Windows-style line endings. To \
121 convert it to Unix-style line endings
, run \
122 "python mozilla/build/win32/mozilla-dos2unix.py")
126 ####################################
127 # Load mozconfig Options
129 # See build pages, http://www.mozilla.org/build/ for how to set up mozconfig.
131 MOZCONFIG_LOADER
:= build
/autoconf
/mozconfig2client-mk
132 MOZCONFIG_FINDER
:= build
/autoconf
/mozconfig-find
133 MOZCONFIG_MODULES
:= build
/unix
/uniq.pl
137 run_for_side_effects
:= \
138 $(shell $(TOPSRCDIR
)/$(MOZCONFIG_LOADER
) $(TOPSRCDIR
) $(TOPSRCDIR
)/.mozconfig.mk
> $(TOPSRCDIR
)/.mozconfig.out
)
140 include $(TOPSRCDIR
)/.mozconfig.mk
142 ifdef MOZ_BUILD_PROJECTS
145 $(error When MOZ_BUILD_PROJECTS is set
, you must set MOZ_OBJDIR
)
147 ifdef MOZ_CURRENT_PROJECT
148 OBJDIR
= $(MOZ_OBJDIR
)/$(MOZ_CURRENT_PROJECT
)
149 MOZ_MAKE
= $(MAKE
) $(MOZ_MAKE_FLAGS
) -C
$(OBJDIR
)
150 BUILD_PROJECT_ARG
= MOZ_BUILD_APP
=$(MOZ_CURRENT_PROJECT
)
152 OBJDIR
= $(error Cannot find the OBJDIR when MOZ_CURRENT_PROJECT is not set.
)
153 MOZ_MAKE
= $(error Cannot build in the OBJDIR when MOZ_CURRENT_PROJECT is not set.
)
156 else # MOZ_BUILD_PROJECTS
159 OBJDIR
= $(MOZ_OBJDIR
)
160 MOZ_MAKE
= $(MAKE
) $(MOZ_MAKE_FLAGS
) -C
$(OBJDIR
)
162 OBJDIR
:= $(TOPSRCDIR
)
163 MOZ_MAKE
:= $(MAKE
) $(MOZ_MAKE_FLAGS
)
166 endif # MOZ_BUILD_PROJECTS
168 CONFIGURES
:= $(TOPSRCDIR
)/configure
169 CONFIGURES
+= $(TOPSRCDIR
)/nsprpub
/configure
171 #######################################################################
175 # The default rule is build
178 # Print out any options loaded from mozconfig.
179 all build
clean depend
distclean export libs
install realclean::
180 @if
test -f .mozconfig.out
; then \
181 cat .mozconfig.out
; \
182 rm -f .mozconfig.out
; \
186 # Windows equivalents
188 build_all_dep
: alldep
189 build_all_depend
: alldep
190 clobber clobber_all
: clean
192 # Do everything from scratch
193 everything
: clean build
195 ####################################
196 # Profile-Guided Optimization
197 # To use this, you should set the following variables in your mozconfig
198 # mk_add_options PROFILE_GEN_SCRIPT=/path/to/profile-script
200 # The profile script should exercise the functionality to be included
201 # in the profile feedback.
203 # This is up here, outside of the MOZ_CURRENT_PROJECT logic so that this
204 # is usable in multi-pass builds, where you might not have a runnable
205 # application until all the build passes and postflight scripts have run.
207 PGO_OBJDIR
= $(MOZ_OBJDIR
)
209 PGO_OBJDIR
:= $(TOPSRCDIR
)
213 $(MAKE
) -f
$(TOPSRCDIR
)/client.mk build MOZ_PROFILE_GENERATE
=1
214 OBJDIR
=${PGO_OBJDIR} $(PROFILE_GEN_SCRIPT
)
215 $(MAKE
) -f
$(TOPSRCDIR
)/client.mk maybe_clobber_profiledbuild
216 $(MAKE
) -f
$(TOPSRCDIR
)/client.mk build MOZ_PROFILE_USE
=1
218 #####################################################
219 # Build date unification
221 ifdef MOZ_UNIFY_BDATE
222 ifndef MOZ_BUILD_DATE
223 ifdef MOZ_BUILD_PROJECTS
224 MOZ_BUILD_DATE
= $(shell $(PYTHON
) $(TOPSRCDIR
)/toolkit
/xre
/make-platformini.py
--print-buildid
)
225 export MOZ_BUILD_DATE
230 #####################################################
231 # Preflight, before building any project
233 build alldep preflight_all
::
234 ifeq (,$(MOZ_CURRENT_PROJECT
)$(if
$(MOZ_PREFLIGHT_ALL
),,1))
235 # Don't run preflight_all for individual projects in multi-project builds
236 # (when MOZ_CURRENT_PROJECT is set.)
237 ifndef MOZ_BUILD_PROJECTS
238 # Building a single project, OBJDIR is usable.
240 for mkfile in
$(MOZ_PREFLIGHT_ALL
); do \
241 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile preflight_all TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
244 # OBJDIR refers to the project-specific OBJDIR, which is not available at
245 # this point when building multiple projects. Only MOZ_OBJDIR is available.
247 for mkfile in
$(MOZ_PREFLIGHT_ALL
); do \
248 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile preflight_all TOPSRCDIR
=$(TOPSRCDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
) MOZ_BUILD_PROJECTS
="$(MOZ_BUILD_PROJECTS)"; \
253 # If we're building multiple projects, but haven't specified which project,
256 ifeq (,$(MOZ_CURRENT_PROJECT
)$(if
$(MOZ_BUILD_PROJECTS
),,1))
257 configure depend build
install export libs
clean realclean distclean alldep preflight postflight maybe_clobber_profiledbuild
::
259 for app in
$(MOZ_BUILD_PROJECTS
); do \
260 $(MAKE
) -f
$(TOPSRCDIR
)/client.mk
$@ MOZ_CURRENT_PROJECT
=$$app; \
265 # MOZ_CURRENT_PROJECT: either doing a single-project build, or building an
266 # individual project in a multi-project build.
268 ####################################
271 CONFIG_STATUS
= $(wildcard $(OBJDIR
)/config.status
)
272 CONFIG_CACHE
= $(wildcard $(OBJDIR
)/config.cache
)
274 ifdef RUN_AUTOCONF_LOCALLY
275 EXTRA_CONFIG_DEPS
:= \
276 $(TOPSRCDIR
)/aclocal.m4 \
277 $(wildcard $(TOPSRCDIR
)/build
/autoconf
/*.m4
) \
280 $(TOPSRCDIR
)/configure
: $(TOPSRCDIR
)/configure.in
$(EXTRA_CONFIG_DEPS
)
281 @echo Generating
$@ using autoconf
282 cd
$(TOPSRCDIR
); $(AUTOCONF
)
284 $(TOPSRCDIR
)/nsprpub
/configure
: $(TOPSRCDIR
)/nsprpub
/configure.in
$(EXTRA_CONFIG_DEPS
)
285 @echo Generating
$@ using autoconf
286 cd
$(TOPSRCDIR
)/nsprpub
; $(AUTOCONF
)
289 CONFIG_STATUS_DEPS
:= \
290 $(TOPSRCDIR
)/configure \
291 $(TOPSRCDIR
)/allmakefiles.sh \
292 $(TOPSRCDIR
)/.mozconfig.mk \
293 $(wildcard $(TOPSRCDIR
)/nsprpub
/configure
) \
294 $(wildcard $(TOPSRCDIR
)/directory
/c-sdk
/configure
) \
295 $(wildcard $(TOPSRCDIR
)/config
/milestone.txt
) \
296 $(wildcard $(TOPSRCDIR
)/config
/chrome-versions.sh
) \
297 $(wildcard $(addsuffix confvars.sh
,$(wildcard $(TOPSRCDIR
)/*/))) \
300 # configure uses the program name to determine @srcdir@. Calling it without
301 # $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
302 # path of $(TOPSRCDIR).
303 ifeq ($(TOPSRCDIR
),$(OBJDIR
))
304 CONFIGURE
= .
/configure
306 CONFIGURE
= $(TOPSRCDIR
)/configure
310 CONFIGURE
= $(TOPSRCDIR
)/configure
313 configure
:: $(CONFIGURES
)
314 ifdef MOZ_BUILD_PROJECTS
315 @if
test ! -d
$(MOZ_OBJDIR
); then
$(MKDIR
) $(MOZ_OBJDIR
); else true
; fi
317 @if
test ! -d
$(OBJDIR
); then
$(MKDIR
) $(OBJDIR
); else true
; fi
319 @echo
$(CONFIGURE
) $(CONFIGURE_ARGS
)
320 @cd
$(OBJDIR
) && $(BUILD_PROJECT_ARG
) $(CONFIGURE_ENV_ARGS
) $(CONFIGURE
) $(CONFIGURE_ARGS
) \
321 ||
( echo
"*** Fix above errors and then restart with\
322 \"$(MAKE) -f client.mk build\"" && exit
1 )
323 @touch
$(OBJDIR
)/Makefile
325 $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
: $(CONFIG_STATUS_DEPS
)
326 @
$(MAKE
) -f
$(TOPSRCDIR
)/client.mk configure
328 ifneq (,$(CONFIG_STATUS
))
329 $(OBJDIR
)/config
/autoconf.mk
: $(TOPSRCDIR
)/config
/autoconf.mk.in
331 CONFIG_FILES
=config
/autoconf.mk .
/config.status
335 ####################################
338 depend
:: $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
339 $(MOZ_MAKE
) export && $(MOZ_MAKE
) depend
341 ####################################
344 build alldep preflight
::
347 for mkfile in
$(MOZ_PREFLIGHT
); do \
348 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile preflight TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
352 ####################################
355 build
:: $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
358 ####################################
361 # Pass these target onto the real build system
362 install export libs
clean realclean distclean alldep maybe_clobber_profiledbuild
:: $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
365 ####################################
368 build alldep postflight
::
371 for mkfile in
$(MOZ_POSTFLIGHT
); do \
372 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile postflight TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
376 endif # MOZ_CURRENT_PROJECT
378 ####################################
379 # Postflight, after building all projects
381 build alldep postflight_all
::
382 ifeq (,$(MOZ_CURRENT_PROJECT
)$(if
$(MOZ_POSTFLIGHT_ALL
),,1))
383 # Don't run postflight_all for individual projects in multi-project builds
384 # (when MOZ_CURRENT_PROJECT is set.)
385 ifndef MOZ_BUILD_PROJECTS
386 # Building a single project, OBJDIR is usable.
388 for mkfile in
$(MOZ_POSTFLIGHT_ALL
); do \
389 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile postflight_all TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
392 # OBJDIR refers to the project-specific OBJDIR, which is not available at
393 # this point when building multiple projects. Only MOZ_OBJDIR is available.
395 for mkfile in
$(MOZ_POSTFLIGHT_ALL
); do \
396 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile postflight_all TOPSRCDIR
=$(TOPSRCDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
) MOZ_BUILD_PROJECTS
="$(MOZ_BUILD_PROJECTS)"; \
403 if
[ -f Makefile
]; then \
404 $(MAKE
) distclean ; \
406 echo
"Removing object files from srcdir..."; \
407 rm -fr
`find . -type d \( -name .deps -print -o -name CVS \
408 -o -exec test ! -d {}/CVS \; \) -prune \
409 -o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
410 build
/autoconf
/clean-config.sh
; \
416 .PHONY
: checkout real_checkout depend build profiledbuild maybe_clobber_profiledbuild
export libs alldep
install clean realclean distclean cleansrcdir pull_all build_all
clobber clobber_all pull_and_build_all everything configure preflight_all preflight postflight postflight_all