1 # ***** BEGIN LICENSE BLOCK *****
2 # Version: MPL 1.1/GPL 2.0/LGPL 2.1
4 # The contents of this file are subject to the Mozilla Public License Version
5 # 1.1 (the "License"); you may not use this file except in compliance with
6 # the License. You may obtain a copy of the License at
7 # http://www.mozilla.org/MPL/
9 # Software distributed under the License is distributed on an "AS IS" basis,
10 # WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
11 # for the specific language governing rights and limitations under the
14 # The Original Code is mozilla.org code.
16 # The Initial Developer of the Original Code is
17 # Netscape Communications Corporation.
18 # Portions created by the Initial Developer are Copyright (C) 1998
19 # the Initial Developer. All Rights Reserved.
23 # Benjamin Smedberg <bsmedberg@covad.net>
24 # Chase Phillips <chase@mozilla.org>
25 # Mark Mentovai <mark@moxienet.com>
27 # Alternatively, the contents of this file may be used under the terms of
28 # either the GNU General Public License Version 2 or later (the "GPL"), or
29 # the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
30 # in which case the provisions of the GPL or the LGPL are applicable instead
31 # of those above. If you wish to allow use of your version of this file only
32 # under the terms of either the GPL or the LGPL, and not to allow others to
33 # use your version of this file under the terms of the MPL, indicate your
34 # decision by deleting the provisions above and replace them with the notice
35 # and other provisions required by the GPL or the LGPL. If you do not delete
36 # the provisions above, a recipient may use your version of this file under
37 # the terms of any one of the MPL, the GPL or the LGPL.
39 # ***** END LICENSE BLOCK *****
41 # Build a mozilla application.
44 # 1. hg clone ssh://hg.mozilla.org/mozilla-central mozilla
46 # 3. create your .mozconfig file with
47 # ac_add_options --enable-application=browser
48 # 4. gmake -f client.mk
50 # Other targets (gmake -f client.mk [targets...]),
52 # clean (realclean is now the same as clean)
55 # See http://developer.mozilla.org/en/docs/Build_Documentation for
59 # MOZ_BUILD_PROJECTS - Build multiple projects in subdirectories
61 # MOZ_OBJDIR - Destination object directory
62 # MOZ_MAKE_FLAGS - Flags to pass to $(MAKE)
63 # MOZ_PREFLIGHT_ALL } - Makefiles to run before any project in
64 # MOZ_PREFLIGHT } MOZ_BUILD_PROJECTS, before each project, after
65 # MOZ_POSTFLIGHT } each project, and after all projects; these
66 # MOZ_POSTFLIGHT_ALL } variables contain space-separated lists
67 # MOZ_UNIFY_BDATE - Set to use the same bdate for each project in
70 #######################################################################
77 ifneq (1,$(words $(CWD
)))
78 $(error The mozilla directory cannot be located in a path with spaces.
)
86 ifeq (,$(wildcard client.mk
))
87 $(error Must run from the client.mk directory
, or specify TOPSRCDIR
)
92 # try to find autoconf 2.13 - discard errors from 'which'
93 # MacOS X 10.4 sends "no autoconf*" errors to stdout, discard those via grep
94 AUTOCONF ?
= $(shell which autoconf-2.13 autoconf2.13 autoconf213
2>/dev
/null | grep
-v
'^no autoconf' | head
-1)
96 ifeq (,$(strip $(AUTOCONF
)))
97 AUTOCONF
=$(error Couldn
't find autoconf 2.13)
108 RUN_AUTOCONF_LOCALLY = 1
109 CONFIG_GUESS_SCRIPT := $(wildcard $(TOPSRCDIR)/build/autoconf/config.guess)
110 ifdef CONFIG_GUESS_SCRIPT
111 CONFIG_GUESS = $(shell $(CONFIG_GUESS_SCRIPT))
115 ####################################
118 ifneq (,$(filter MINGW%,$(shell uname -s)))
119 # check for CRLF line endings
120 ifneq (0,$(shell $(PERL) -e 'binmode
(STDIN
); while
(<STDIN
>) { if
(/\r/) { print "1"; exit
} } print "0"' < $(TOPSRCDIR)/client.mk))
121 $(error This source tree appears to have Windows-style line endings. To \
122 convert it to Unix-style line endings, run \
123 "python mozilla/build/win32/mozilla-dos2unix.py")
127 ####################################
128 # Load mozconfig Options
130 # See build pages, http://www.mozilla.org/build/ for how to set up mozconfig.
132 MOZCONFIG_LOADER := build/autoconf/mozconfig2client-mk
133 MOZCONFIG_FINDER := build/autoconf/mozconfig-find
134 MOZCONFIG_MODULES := build/unix/uniq.pl
138 run_for_side_effects := \
139 $(shell $(TOPSRCDIR)/$(MOZCONFIG_LOADER) $(TOPSRCDIR) $(TOPSRCDIR)/.mozconfig.mk > $(TOPSRCDIR)/.mozconfig.out)
141 include $(TOPSRCDIR)/.mozconfig.mk
143 ifdef MOZ_BUILD_PROJECTS
146 $(error When MOZ_BUILD_PROJECTS is set, you must set MOZ_OBJDIR)
148 ifdef MOZ_CURRENT_PROJECT
149 OBJDIR = $(MOZ_OBJDIR)/$(MOZ_CURRENT_PROJECT)
150 MOZ_MAKE = $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
151 BUILD_PROJECT_ARG = MOZ_BUILD_APP=$(MOZ_CURRENT_PROJECT)
153 OBJDIR = $(error Cannot find the OBJDIR when MOZ_CURRENT_PROJECT is not set.)
154 MOZ_MAKE = $(error Cannot build in the OBJDIR when MOZ_CURRENT_PROJECT is not set.)
157 else # MOZ_BUILD_PROJECTS
160 OBJDIR = $(MOZ_OBJDIR)
161 MOZ_MAKE = $(MAKE) $(MOZ_MAKE_FLAGS) -C $(OBJDIR)
163 OBJDIR := $(TOPSRCDIR)
164 MOZ_MAKE := $(MAKE) $(MOZ_MAKE_FLAGS)
167 endif # MOZ_BUILD_PROJECTS
169 # 'configure
' scripts generated by autoconf.
170 CONFIGURES := $(TOPSRCDIR)/configure
171 CONFIGURES += $(TOPSRCDIR)/js/src/configure
173 #######################################################################
177 # The default rule is build
180 # Print out any options loaded from mozconfig.
181 all build clean depend distclean export libs install realclean::
182 @if test -f .mozconfig.out; then \
183 cat .mozconfig.out; \
184 rm -f .mozconfig.out; \
188 # Windows equivalents
190 build_all_dep: alldep
191 build_all_depend: alldep
192 clobber clobber_all: clean
194 # Do everything from scratch
195 everything: clean build
197 ####################################
198 # Profile-Guided Optimization
199 # To use this, you should set the following variables in your mozconfig
200 # mk_add_options PROFILE_GEN_SCRIPT=/path/to/profile-script
202 # The profile script should exercise the functionality to be included
203 # in the profile feedback.
205 # This is up here, outside of the MOZ_CURRENT_PROJECT logic so that this
206 # is usable in multi-pass builds, where you might not have a runnable
207 # application until all the build passes and postflight scripts have run.
209 PGO_OBJDIR = $(MOZ_OBJDIR)
211 PGO_OBJDIR := $(TOPSRCDIR)
215 $(MAKE) -f $(TOPSRCDIR)/client.mk build MOZ_PROFILE_GENERATE=1
216 OBJDIR=${PGO_OBJDIR} $(PROFILE_GEN_SCRIPT)
217 $(MAKE) -f $(TOPSRCDIR)/client.mk maybe_clobber_profiledbuild
218 $(MAKE) -f $(TOPSRCDIR)/client.mk build MOZ_PROFILE_USE=1
220 #####################################################
221 # Build date unification
223 ifdef MOZ_UNIFY_BDATE
224 ifndef MOZ_BUILD_DATE
225 ifdef MOZ_BUILD_PROJECTS
226 MOZ_BUILD_DATE = $(shell $(PYTHON) $(TOPSRCDIR)/toolkit/xre/make-platformini.py --print-buildid)
227 export MOZ_BUILD_DATE
232 #####################################################
233 # Preflight, before building any project
235 build alldep preflight_all::
236 ifeq (,$(MOZ_CURRENT_PROJECT)$(if $(MOZ_PREFLIGHT_ALL),,1))
237 # Don't run preflight_all for individual projects in multi-project builds
238 # (when MOZ_CURRENT_PROJECT is set.)
239 ifndef MOZ_BUILD_PROJECTS
240 # Building a single project, OBJDIR is usable.
242 for mkfile in
$(MOZ_PREFLIGHT_ALL
); do \
243 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile preflight_all TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
246 # OBJDIR refers to the project-specific OBJDIR, which is not available at
247 # this point when building multiple projects. Only MOZ_OBJDIR is available.
249 for mkfile in
$(MOZ_PREFLIGHT_ALL
); do \
250 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile preflight_all TOPSRCDIR
=$(TOPSRCDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
) MOZ_BUILD_PROJECTS
="$(MOZ_BUILD_PROJECTS)"; \
255 # If we're building multiple projects, but haven't specified which project,
258 ifeq (,$(MOZ_CURRENT_PROJECT
)$(if
$(MOZ_BUILD_PROJECTS
),,1))
259 configure depend build
install export libs
clean realclean distclean alldep preflight postflight maybe_clobber_profiledbuild upload sdk
::
261 for app in
$(MOZ_BUILD_PROJECTS
); do \
262 $(MAKE
) -f
$(TOPSRCDIR
)/client.mk
$@ MOZ_CURRENT_PROJECT
=$$app; \
267 # MOZ_CURRENT_PROJECT: either doing a single-project build, or building an
268 # individual project in a multi-project build.
270 ####################################
273 CONFIG_STATUS
= $(wildcard $(OBJDIR
)/config.status
)
274 CONFIG_CACHE
= $(wildcard $(OBJDIR
)/config.cache
)
276 ifdef RUN_AUTOCONF_LOCALLY
277 EXTRA_CONFIG_DEPS
:= \
278 $(TOPSRCDIR
)/aclocal.m4 \
279 $(wildcard $(TOPSRCDIR
)/build
/autoconf
/*.m4
) \
280 $(TOPSRCDIR
)/js
/src
/aclocal.m4 \
283 $(CONFIGURES
): %: %.in
$(EXTRA_CONFIG_DEPS
)
284 @echo Generating
$@ using autoconf
285 cd
$(@D
); $(AUTOCONF
)
288 CONFIG_STATUS_DEPS
:= \
289 $(wildcard $(CONFIGURES
)) \
290 $(TOPSRCDIR
)/allmakefiles.sh \
291 $(TOPSRCDIR
)/.mozconfig.mk \
292 $(wildcard $(TOPSRCDIR
)/nsprpub
/configure
) \
293 $(wildcard $(TOPSRCDIR
)/config
/milestone.txt
) \
294 $(wildcard $(TOPSRCDIR
)/config
/chrome-versions.sh
) \
295 $(wildcard $(addsuffix confvars.sh
,$(wildcard $(TOPSRCDIR
)/*/))) \
298 # configure uses the program name to determine @srcdir@. Calling it without
299 # $(TOPSRCDIR) will set @srcdir@ to "."; otherwise, it is set to the full
300 # path of $(TOPSRCDIR).
301 ifeq ($(TOPSRCDIR
),$(OBJDIR
))
302 CONFIGURE
= .
/configure
304 CONFIGURE
= $(TOPSRCDIR
)/configure
308 CONFIGURE
= $(TOPSRCDIR
)/configure
311 configure-files
: $(CONFIGURES
)
313 configure
:: configure-files
314 ifdef MOZ_BUILD_PROJECTS
315 @if
test ! -d
$(MOZ_OBJDIR
); then
$(MKDIR
) $(MOZ_OBJDIR
); else true
; fi
317 @if
test ! -d
$(OBJDIR
); then
$(MKDIR
) $(OBJDIR
); else true
; fi
319 @echo
$(CONFIGURE
) $(CONFIGURE_ARGS
)
320 @cd
$(OBJDIR
) && $(BUILD_PROJECT_ARG
) $(CONFIGURE_ENV_ARGS
) $(CONFIGURE
) $(CONFIGURE_ARGS
) \
321 ||
( echo
"*** Fix above errors and then restart with\
322 \"$(MAKE) -f client.mk build\"" && exit
1 )
323 @touch
$(OBJDIR
)/Makefile
325 $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
: $(CONFIG_STATUS_DEPS
)
326 @
$(MAKE
) -f
$(TOPSRCDIR
)/client.mk configure
328 ifneq (,$(CONFIG_STATUS
))
329 $(OBJDIR
)/config
/autoconf.mk
: $(TOPSRCDIR
)/config
/autoconf.mk.in
331 CONFIG_FILES
=config
/autoconf.mk .
/config.status
335 ####################################
338 depend
:: $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
339 $(MOZ_MAKE
) export && $(MOZ_MAKE
) depend
341 ####################################
344 build alldep preflight
::
347 for mkfile in
$(MOZ_PREFLIGHT
); do \
348 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile preflight TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
352 ####################################
355 build
:: $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
358 ####################################
361 # Pass these target onto the real build system
362 install export libs
clean realclean distclean alldep maybe_clobber_profiledbuild upload sdk
:: $(OBJDIR
)/Makefile
$(OBJDIR
)/config.status
365 ####################################
368 build alldep postflight
::
371 for mkfile in
$(MOZ_POSTFLIGHT
); do \
372 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile postflight TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
376 endif # MOZ_CURRENT_PROJECT
378 ####################################
379 # Postflight, after building all projects
381 build alldep postflight_all
::
382 ifeq (,$(MOZ_CURRENT_PROJECT
)$(if
$(MOZ_POSTFLIGHT_ALL
),,1))
383 # Don't run postflight_all for individual projects in multi-project builds
384 # (when MOZ_CURRENT_PROJECT is set.)
385 ifndef MOZ_BUILD_PROJECTS
386 # Building a single project, OBJDIR is usable.
388 for mkfile in
$(MOZ_POSTFLIGHT_ALL
); do \
389 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile postflight_all TOPSRCDIR
=$(TOPSRCDIR
) OBJDIR
=$(OBJDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
); \
392 # OBJDIR refers to the project-specific OBJDIR, which is not available at
393 # this point when building multiple projects. Only MOZ_OBJDIR is available.
395 for mkfile in
$(MOZ_POSTFLIGHT_ALL
); do \
396 $(MAKE
) -f
$(TOPSRCDIR
)/$$mkfile postflight_all TOPSRCDIR
=$(TOPSRCDIR
) MOZ_OBJDIR
=$(MOZ_OBJDIR
) MOZ_BUILD_PROJECTS
="$(MOZ_BUILD_PROJECTS)"; \
403 if
[ -f Makefile
]; then \
404 $(MAKE
) distclean ; \
406 echo
"Removing object files from srcdir..."; \
407 rm -fr
`find . -type d \( -name .deps -print -o -name CVS \
408 -o -exec test ! -d {}/CVS \; \) -prune \
409 -o \( -name '*.[ao]' -o -name '*.so' \) -type f -print`; \
410 build
/autoconf
/clean-config.sh
; \
416 # This makefile doesn't support parallel execution. It does pass
417 # MOZ_MAKE_FLAGS to sub-make processes, so they will correctly execute
421 .PHONY
: checkout real_checkout depend build profiledbuild maybe_clobber_profiledbuild
export libs alldep
install clean realclean distclean cleansrcdir pull_all build_all
clobber clobber_all pull_and_build_all everything configure preflight_all preflight postflight postflight_all