Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / include / asm-arm / arch-omap / hardware.h
blobda572092e255aa390bd68ec69cdb84d0a0e91acd
1 /*
2 * linux/include/asm-arm/arch-omap/hardware.h
4 * Hardware definitions for TI OMAP processors and boards
6 * NOTE: Please put device driver specific defines into a separate header
7 * file for each driver.
9 * Copyright (C) 2001 RidgeRun, Inc.
10 * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
12 * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
13 * and Dirk Behme <dirk.behme@de.bosch.com>
15 * This program is free software; you can redistribute it and/or modify it
16 * under the terms of the GNU General Public License as published by the
17 * Free Software Foundation; either version 2 of the License, or (at your
18 * option) any later version.
20 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
21 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
22 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
23 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
24 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
25 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
26 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
27 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
28 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
29 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 * You should have received a copy of the GNU General Public License along
32 * with this program; if not, write to the Free Software Foundation, Inc.,
33 * 675 Mass Ave, Cambridge, MA 02139, USA.
36 #ifndef __ASM_ARCH_OMAP_HARDWARE_H
37 #define __ASM_ARCH_OMAP_HARDWARE_H
39 #include <asm/sizes.h>
40 #ifndef __ASSEMBLER__
41 #include <asm/types.h>
42 #include <asm/arch/cpu.h>
43 #endif
44 #include <asm/arch/io.h>
45 #include <asm/arch/serial.h>
48 * ---------------------------------------------------------------------------
49 * Common definitions for all OMAP processors
50 * NOTE: Put all processor or board specific parts to the special header
51 * files.
52 * ---------------------------------------------------------------------------
56 * ----------------------------------------------------------------------------
57 * Timers
58 * ----------------------------------------------------------------------------
60 #define OMAP_MPU_TIMER1_BASE (0xfffec500)
61 #define OMAP_MPU_TIMER2_BASE (0xfffec600)
62 #define OMAP_MPU_TIMER3_BASE (0xfffec700)
63 #define MPU_TIMER_FREE (1 << 6)
64 #define MPU_TIMER_CLOCK_ENABLE (1 << 5)
65 #define MPU_TIMER_AR (1 << 1)
66 #define MPU_TIMER_ST (1 << 0)
69 * ----------------------------------------------------------------------------
70 * Clocks
71 * ----------------------------------------------------------------------------
73 #define CLKGEN_REG_BASE (0xfffece00)
74 #define ARM_CKCTL (CLKGEN_REG_BASE + 0x0)
75 #define ARM_IDLECT1 (CLKGEN_REG_BASE + 0x4)
76 #define ARM_IDLECT2 (CLKGEN_REG_BASE + 0x8)
77 #define ARM_EWUPCT (CLKGEN_REG_BASE + 0xC)
78 #define ARM_RSTCT1 (CLKGEN_REG_BASE + 0x10)
79 #define ARM_RSTCT2 (CLKGEN_REG_BASE + 0x14)
80 #define ARM_SYSST (CLKGEN_REG_BASE + 0x18)
81 #define ARM_IDLECT3 (CLKGEN_REG_BASE + 0x24)
83 #define CK_RATEF 1
84 #define CK_IDLEF 2
85 #define CK_ENABLEF 4
86 #define CK_SELECTF 8
87 #define SETARM_IDLE_SHIFT
89 /* DPLL control registers */
90 #define DPLL_CTL (0xfffecf00)
92 /* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
93 #define DSP_CONFIG_REG_BASE (0xe1008000)
94 #define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
95 #define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
96 #define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
97 #define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
100 * ---------------------------------------------------------------------------
101 * UPLD
102 * ---------------------------------------------------------------------------
104 #define ULPD_REG_BASE (0xfffe0800)
105 #define ULPD_IT_STATUS (ULPD_REG_BASE + 0x14)
106 #define ULPD_SETUP_ANALOG_CELL_3 (ULPD_REG_BASE + 0x24)
107 #define ULPD_CLOCK_CTRL (ULPD_REG_BASE + 0x30)
108 # define DIS_USB_PVCI_CLK (1 << 5) /* no USB/FAC synch */
109 # define USB_MCLK_EN (1 << 4) /* enable W4_USB_CLKO */
110 #define ULPD_SOFT_REQ (ULPD_REG_BASE + 0x34)
111 # define SOFT_UDC_REQ (1 << 4)
112 # define SOFT_USB_CLK_REQ (1 << 3)
113 # define SOFT_DPLL_REQ (1 << 0)
114 #define ULPD_DPLL_CTRL (ULPD_REG_BASE + 0x3c)
115 #define ULPD_STATUS_REQ (ULPD_REG_BASE + 0x40)
116 #define ULPD_APLL_CTRL (ULPD_REG_BASE + 0x4c)
117 #define ULPD_POWER_CTRL (ULPD_REG_BASE + 0x50)
118 #define ULPD_SOFT_DISABLE_REQ_REG (ULPD_REG_BASE + 0x68)
119 # define DIS_MMC2_DPLL_REQ (1 << 11)
120 # define DIS_MMC1_DPLL_REQ (1 << 10)
121 # define DIS_UART3_DPLL_REQ (1 << 9)
122 # define DIS_UART2_DPLL_REQ (1 << 8)
123 # define DIS_UART1_DPLL_REQ (1 << 7)
124 # define DIS_USB_HOST_DPLL_REQ (1 << 6)
125 #define ULPD_SDW_CLK_DIV_CTRL_SEL (ULPD_REG_BASE + 0x74)
126 #define ULPD_CAM_CLK_CTRL (ULPD_REG_BASE + 0x7c)
129 * ---------------------------------------------------------------------------
130 * Watchdog timer
131 * ---------------------------------------------------------------------------
134 /* Watchdog timer within the OMAP3.2 gigacell */
135 #define OMAP_MPU_WATCHDOG_BASE (0xfffec800)
136 #define OMAP_WDT_TIMER (OMAP_MPU_WATCHDOG_BASE + 0x0)
137 #define OMAP_WDT_LOAD_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
138 #define OMAP_WDT_READ_TIM (OMAP_MPU_WATCHDOG_BASE + 0x4)
139 #define OMAP_WDT_TIMER_MODE (OMAP_MPU_WATCHDOG_BASE + 0x8)
142 * ---------------------------------------------------------------------------
143 * Interrupts
144 * ---------------------------------------------------------------------------
146 #ifdef CONFIG_ARCH_OMAP1
149 * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
150 * or something similar.. -- PFM.
153 #define OMAP_IH1_BASE 0xfffecb00
154 #define OMAP_IH2_BASE 0xfffe0000
156 #define OMAP_IH1_ITR (OMAP_IH1_BASE + 0x00)
157 #define OMAP_IH1_MIR (OMAP_IH1_BASE + 0x04)
158 #define OMAP_IH1_SIR_IRQ (OMAP_IH1_BASE + 0x10)
159 #define OMAP_IH1_SIR_FIQ (OMAP_IH1_BASE + 0x14)
160 #define OMAP_IH1_CONTROL (OMAP_IH1_BASE + 0x18)
161 #define OMAP_IH1_ILR0 (OMAP_IH1_BASE + 0x1c)
162 #define OMAP_IH1_ISR (OMAP_IH1_BASE + 0x9c)
164 #define OMAP_IH2_ITR (OMAP_IH2_BASE + 0x00)
165 #define OMAP_IH2_MIR (OMAP_IH2_BASE + 0x04)
166 #define OMAP_IH2_SIR_IRQ (OMAP_IH2_BASE + 0x10)
167 #define OMAP_IH2_SIR_FIQ (OMAP_IH2_BASE + 0x14)
168 #define OMAP_IH2_CONTROL (OMAP_IH2_BASE + 0x18)
169 #define OMAP_IH2_ILR0 (OMAP_IH2_BASE + 0x1c)
170 #define OMAP_IH2_ISR (OMAP_IH2_BASE + 0x9c)
172 #define IRQ_ITR_REG_OFFSET 0x00
173 #define IRQ_MIR_REG_OFFSET 0x04
174 #define IRQ_SIR_IRQ_REG_OFFSET 0x10
175 #define IRQ_SIR_FIQ_REG_OFFSET 0x14
176 #define IRQ_CONTROL_REG_OFFSET 0x18
177 #define IRQ_ISR_REG_OFFSET 0x9c
178 #define IRQ_ILR0_REG_OFFSET 0x1c
179 #define IRQ_GMR_REG_OFFSET 0xa0
181 #endif
184 * ----------------------------------------------------------------------------
185 * System control registers
186 * ----------------------------------------------------------------------------
188 #define MOD_CONF_CTRL_0 0xfffe1080
189 #define MOD_CONF_CTRL_1 0xfffe1110
192 * ----------------------------------------------------------------------------
193 * Pin multiplexing registers
194 * ----------------------------------------------------------------------------
196 #define FUNC_MUX_CTRL_0 0xfffe1000
197 #define FUNC_MUX_CTRL_1 0xfffe1004
198 #define FUNC_MUX_CTRL_2 0xfffe1008
199 #define COMP_MODE_CTRL_0 0xfffe100c
200 #define FUNC_MUX_CTRL_3 0xfffe1010
201 #define FUNC_MUX_CTRL_4 0xfffe1014
202 #define FUNC_MUX_CTRL_5 0xfffe1018
203 #define FUNC_MUX_CTRL_6 0xfffe101C
204 #define FUNC_MUX_CTRL_7 0xfffe1020
205 #define FUNC_MUX_CTRL_8 0xfffe1024
206 #define FUNC_MUX_CTRL_9 0xfffe1028
207 #define FUNC_MUX_CTRL_A 0xfffe102C
208 #define FUNC_MUX_CTRL_B 0xfffe1030
209 #define FUNC_MUX_CTRL_C 0xfffe1034
210 #define FUNC_MUX_CTRL_D 0xfffe1038
211 #define PULL_DWN_CTRL_0 0xfffe1040
212 #define PULL_DWN_CTRL_1 0xfffe1044
213 #define PULL_DWN_CTRL_2 0xfffe1048
214 #define PULL_DWN_CTRL_3 0xfffe104c
215 #define PULL_DWN_CTRL_4 0xfffe10ac
217 /* OMAP-1610 specific multiplexing registers */
218 #define FUNC_MUX_CTRL_E 0xfffe1090
219 #define FUNC_MUX_CTRL_F 0xfffe1094
220 #define FUNC_MUX_CTRL_10 0xfffe1098
221 #define FUNC_MUX_CTRL_11 0xfffe109c
222 #define FUNC_MUX_CTRL_12 0xfffe10a0
223 #define PU_PD_SEL_0 0xfffe10b4
224 #define PU_PD_SEL_1 0xfffe10b8
225 #define PU_PD_SEL_2 0xfffe10bc
226 #define PU_PD_SEL_3 0xfffe10c0
227 #define PU_PD_SEL_4 0xfffe10c4
229 /* Timer32K for 1610 and 1710*/
230 #define OMAP_TIMER32K_BASE 0xFFFBC400
233 * ---------------------------------------------------------------------------
234 * TIPB bus interface
235 * ---------------------------------------------------------------------------
237 #define TIPB_PUBLIC_CNTL_BASE 0xfffed300
238 #define MPU_PUBLIC_TIPB_CNTL (TIPB_PUBLIC_CNTL_BASE + 0x8)
239 #define TIPB_PRIVATE_CNTL_BASE 0xfffeca00
240 #define MPU_PRIVATE_TIPB_CNTL (TIPB_PRIVATE_CNTL_BASE + 0x8)
243 * ----------------------------------------------------------------------------
244 * MPUI interface
245 * ----------------------------------------------------------------------------
247 #define MPUI_BASE (0xfffec900)
248 #define MPUI_CTRL (MPUI_BASE + 0x0)
249 #define MPUI_DEBUG_ADDR (MPUI_BASE + 0x4)
250 #define MPUI_DEBUG_DATA (MPUI_BASE + 0x8)
251 #define MPUI_DEBUG_FLAG (MPUI_BASE + 0xc)
252 #define MPUI_STATUS_REG (MPUI_BASE + 0x10)
253 #define MPUI_DSP_STATUS (MPUI_BASE + 0x14)
254 #define MPUI_DSP_BOOT_CONFIG (MPUI_BASE + 0x18)
255 #define MPUI_DSP_API_CONFIG (MPUI_BASE + 0x1c)
258 * ----------------------------------------------------------------------------
259 * LED Pulse Generator
260 * ----------------------------------------------------------------------------
262 #define OMAP_LPG1_BASE 0xfffbd000
263 #define OMAP_LPG2_BASE 0xfffbd800
264 #define OMAP_LPG1_LCR (OMAP_LPG1_BASE + 0x00)
265 #define OMAP_LPG1_PMR (OMAP_LPG1_BASE + 0x04)
266 #define OMAP_LPG2_LCR (OMAP_LPG2_BASE + 0x00)
267 #define OMAP_LPG2_PMR (OMAP_LPG2_BASE + 0x04)
270 * ----------------------------------------------------------------------------
271 * Pulse-Width Light
272 * ----------------------------------------------------------------------------
274 #define OMAP_PWL_BASE 0xfffb5800
275 #define OMAP_PWL_ENABLE (OMAP_PWL_BASE + 0x00)
276 #define OMAP_PWL_CLK_ENABLE (OMAP_PWL_BASE + 0x04)
279 * ---------------------------------------------------------------------------
280 * Processor specific defines
281 * ---------------------------------------------------------------------------
284 #include "omap730.h"
285 #include "omap1510.h"
286 #include "omap24xx.h"
287 #include "omap16xx.h"
289 #ifndef __ASSEMBLER__
292 * ---------------------------------------------------------------------------
293 * Board specific defines
294 * ---------------------------------------------------------------------------
297 #ifdef CONFIG_MACH_OMAP_INNOVATOR
298 #include "board-innovator.h"
299 #endif
301 #ifdef CONFIG_MACH_OMAP_H2
302 #include "board-h2.h"
303 #endif
305 #ifdef CONFIG_MACH_OMAP_PERSEUS2
306 #include "board-perseus2.h"
307 #endif
309 #ifdef CONFIG_MACH_OMAP_FSAMPLE
310 #include "board-fsample.h"
311 #endif
313 #ifdef CONFIG_MACH_OMAP_H3
314 #include "board-h3.h"
315 #endif
317 #ifdef CONFIG_MACH_OMAP_H4
318 #include "board-h4.h"
319 #endif
321 #ifdef CONFIG_MACH_OMAP_2430SDP
322 #include "board-2430sdp.h"
323 #endif
325 #ifdef CONFIG_MACH_OMAP_APOLLON
326 #include "board-apollon.h"
327 #endif
329 #ifdef CONFIG_MACH_OMAP_OSK
330 #include "board-osk.h"
331 #endif
333 #ifdef CONFIG_MACH_VOICEBLUE
334 #include "board-voiceblue.h"
335 #endif
337 #ifdef CONFIG_MACH_OMAP_PALMTE
338 #include "board-palmte.h"
339 #endif
341 #ifdef CONFIG_MACH_OMAP_PALMZ71
342 #include "board-palmz71.h"
343 #endif
345 #ifdef CONFIG_MACH_OMAP_PALMTT
346 #include "board-palmtt.h"
347 #endif
349 #ifdef CONFIG_MACH_SX1
350 #include "board-sx1.h"
351 #endif
353 #endif /* !__ASSEMBLER__ */
355 #endif /* __ASM_ARCH_OMAP_HARDWARE_H */