Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / drivers / video / omap / sossi.c
blob81dbcf53cf0e50536fc8ebc76b87f38c62ba4fcc
1 /*
2 * OMAP1 Special OptimiSed Screen Interface support
4 * Copyright (C) 2004-2005 Nokia Corporation
5 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 #include <linux/module.h>
22 #include <linux/mm.h>
23 #include <linux/clk.h>
24 #include <linux/irq.h>
25 #include <linux/io.h>
27 #include <asm/arch/dma.h>
28 #include <asm/arch/omapfb.h>
30 #include "lcdc.h"
32 #define MODULE_NAME "omapfb-sossi"
34 #define OMAP_SOSSI_BASE 0xfffbac00
35 #define SOSSI_ID_REG 0x00
36 #define SOSSI_INIT1_REG 0x04
37 #define SOSSI_INIT2_REG 0x08
38 #define SOSSI_INIT3_REG 0x0c
39 #define SOSSI_FIFO_REG 0x10
40 #define SOSSI_REOTABLE_REG 0x14
41 #define SOSSI_TEARING_REG 0x18
42 #define SOSSI_INIT1B_REG 0x1c
43 #define SOSSI_FIFOB_REG 0x20
45 #define DMA_GSCR 0xfffedc04
46 #define DMA_LCD_CCR 0xfffee3c2
47 #define DMA_LCD_CTRL 0xfffee3c4
48 #define DMA_LCD_LCH_CTRL 0xfffee3ea
50 #define CONF_SOSSI_RESET_R (1 << 23)
52 #define RD_ACCESS 0
53 #define WR_ACCESS 1
55 #define SOSSI_MAX_XMIT_BYTES (512 * 1024)
57 static struct {
58 void __iomem *base;
59 struct clk *fck;
60 unsigned long fck_hz;
61 spinlock_t lock;
62 int bus_pick_count;
63 int bus_pick_width;
64 int tearsync_mode;
65 int tearsync_line;
66 void (*lcdc_callback)(void *data);
67 void *lcdc_callback_data;
68 int vsync_dma_pending;
69 /* timing for read and write access */
70 int clk_div;
71 u8 clk_tw0[2];
72 u8 clk_tw1[2];
74 * if last_access is the same as current we don't have to change
75 * the timings
77 int last_access;
79 struct omapfb_device *fbdev;
80 } sossi;
82 static inline u32 sossi_read_reg(int reg)
84 return readl(sossi.base + reg);
87 static inline u16 sossi_read_reg16(int reg)
89 return readw(sossi.base + reg);
92 static inline u8 sossi_read_reg8(int reg)
94 return readb(sossi.base + reg);
97 static inline void sossi_write_reg(int reg, u32 value)
99 writel(value, sossi.base + reg);
102 static inline void sossi_write_reg16(int reg, u16 value)
104 writew(value, sossi.base + reg);
107 static inline void sossi_write_reg8(int reg, u8 value)
109 writeb(value, sossi.base + reg);
112 static void sossi_set_bits(int reg, u32 bits)
114 sossi_write_reg(reg, sossi_read_reg(reg) | bits);
117 static void sossi_clear_bits(int reg, u32 bits)
119 sossi_write_reg(reg, sossi_read_reg(reg) & ~bits);
122 #define HZ_TO_PS(x) (1000000000 / (x / 1000))
124 static u32 ps_to_sossi_ticks(u32 ps, int div)
126 u32 clk_period = HZ_TO_PS(sossi.fck_hz) * div;
127 return (clk_period + ps - 1) / clk_period;
130 static int calc_rd_timings(struct extif_timings *t)
132 u32 tw0, tw1;
133 int reon, reoff, recyc, actim;
134 int div = t->clk_div;
137 * Make sure that after conversion it still holds that:
138 * reoff > reon, recyc >= reoff, actim > reon
140 reon = ps_to_sossi_ticks(t->re_on_time, div);
141 /* reon will be exactly one sossi tick */
142 if (reon > 1)
143 return -1;
145 reoff = ps_to_sossi_ticks(t->re_off_time, div);
147 if (reoff <= reon)
148 reoff = reon + 1;
150 tw0 = reoff - reon;
151 if (tw0 > 0x10)
152 return -1;
154 recyc = ps_to_sossi_ticks(t->re_cycle_time, div);
155 if (recyc <= reoff)
156 recyc = reoff + 1;
158 tw1 = recyc - tw0;
159 /* values less then 3 result in the SOSSI block resetting itself */
160 if (tw1 < 3)
161 tw1 = 3;
162 if (tw1 > 0x40)
163 return -1;
165 actim = ps_to_sossi_ticks(t->access_time, div);
166 if (actim < reoff)
167 actim++;
169 * access time (data hold time) will be exactly one sossi
170 * tick
172 if (actim - reoff > 1)
173 return -1;
175 t->tim[0] = tw0 - 1;
176 t->tim[1] = tw1 - 1;
178 return 0;
181 static int calc_wr_timings(struct extif_timings *t)
183 u32 tw0, tw1;
184 int weon, weoff, wecyc;
185 int div = t->clk_div;
188 * Make sure that after conversion it still holds that:
189 * weoff > weon, wecyc >= weoff
191 weon = ps_to_sossi_ticks(t->we_on_time, div);
192 /* weon will be exactly one sossi tick */
193 if (weon > 1)
194 return -1;
196 weoff = ps_to_sossi_ticks(t->we_off_time, div);
197 if (weoff <= weon)
198 weoff = weon + 1;
199 tw0 = weoff - weon;
200 if (tw0 > 0x10)
201 return -1;
203 wecyc = ps_to_sossi_ticks(t->we_cycle_time, div);
204 if (wecyc <= weoff)
205 wecyc = weoff + 1;
207 tw1 = wecyc - tw0;
208 /* values less then 3 result in the SOSSI block resetting itself */
209 if (tw1 < 3)
210 tw1 = 3;
211 if (tw1 > 0x40)
212 return -1;
214 t->tim[2] = tw0 - 1;
215 t->tim[3] = tw1 - 1;
217 return 0;
220 static void _set_timing(int div, int tw0, int tw1)
222 u32 l;
224 #ifdef VERBOSE
225 dev_dbg(sossi.fbdev->dev, "Using TW0 = %d, TW1 = %d, div = %d\n",
226 tw0 + 1, tw1 + 1, div);
227 #endif
229 clk_set_rate(sossi.fck, sossi.fck_hz / div);
230 clk_enable(sossi.fck);
231 l = sossi_read_reg(SOSSI_INIT1_REG);
232 l &= ~((0x0f << 20) | (0x3f << 24));
233 l |= (tw0 << 20) | (tw1 << 24);
234 sossi_write_reg(SOSSI_INIT1_REG, l);
235 clk_disable(sossi.fck);
238 static void _set_bits_per_cycle(int bus_pick_count, int bus_pick_width)
240 u32 l;
242 l = sossi_read_reg(SOSSI_INIT3_REG);
243 l &= ~0x3ff;
244 l |= ((bus_pick_count - 1) << 5) | ((bus_pick_width - 1) & 0x1f);
245 sossi_write_reg(SOSSI_INIT3_REG, l);
248 static void _set_tearsync_mode(int mode, unsigned line)
250 u32 l;
252 l = sossi_read_reg(SOSSI_TEARING_REG);
253 l &= ~(((1 << 11) - 1) << 15);
254 l |= line << 15;
255 l &= ~(0x3 << 26);
256 l |= mode << 26;
257 sossi_write_reg(SOSSI_TEARING_REG, l);
258 if (mode)
259 sossi_set_bits(SOSSI_INIT2_REG, 1 << 6); /* TE logic */
260 else
261 sossi_clear_bits(SOSSI_INIT2_REG, 1 << 6);
264 static inline void set_timing(int access)
266 if (access != sossi.last_access) {
267 sossi.last_access = access;
268 _set_timing(sossi.clk_div,
269 sossi.clk_tw0[access], sossi.clk_tw1[access]);
273 static void sossi_start_transfer(void)
275 /* WE */
276 sossi_clear_bits(SOSSI_INIT2_REG, 1 << 4);
277 /* CS active low */
278 sossi_clear_bits(SOSSI_INIT1_REG, 1 << 30);
281 static void sossi_stop_transfer(void)
283 /* WE */
284 sossi_set_bits(SOSSI_INIT2_REG, 1 << 4);
285 /* CS active low */
286 sossi_set_bits(SOSSI_INIT1_REG, 1 << 30);
289 static void wait_end_of_write(void)
291 /* Before reading we must check if some writings are going on */
292 while (!(sossi_read_reg(SOSSI_INIT2_REG) & (1 << 3)));
295 static void send_data(const void *data, unsigned int len)
297 while (len >= 4) {
298 sossi_write_reg(SOSSI_FIFO_REG, *(const u32 *) data);
299 len -= 4;
300 data += 4;
302 while (len >= 2) {
303 sossi_write_reg16(SOSSI_FIFO_REG, *(const u16 *) data);
304 len -= 2;
305 data += 2;
307 while (len) {
308 sossi_write_reg8(SOSSI_FIFO_REG, *(const u8 *) data);
309 len--;
310 data++;
314 static void set_cycles(unsigned int len)
316 unsigned long nr_cycles = len / (sossi.bus_pick_width / 8);
318 BUG_ON((nr_cycles - 1) & ~0x3ffff);
320 sossi_clear_bits(SOSSI_INIT1_REG, 0x3ffff);
321 sossi_set_bits(SOSSI_INIT1_REG, (nr_cycles - 1) & 0x3ffff);
324 static int sossi_convert_timings(struct extif_timings *t)
326 int r = 0;
327 int div = t->clk_div;
329 t->converted = 0;
331 if (div <= 0 || div > 8)
332 return -1;
334 /* no CS on SOSSI, so ignore cson, csoff, cs_pulsewidth */
335 if ((r = calc_rd_timings(t)) < 0)
336 return r;
338 if ((r = calc_wr_timings(t)) < 0)
339 return r;
341 t->tim[4] = div;
343 t->converted = 1;
345 return 0;
348 static void sossi_set_timings(const struct extif_timings *t)
350 BUG_ON(!t->converted);
352 sossi.clk_tw0[RD_ACCESS] = t->tim[0];
353 sossi.clk_tw1[RD_ACCESS] = t->tim[1];
355 sossi.clk_tw0[WR_ACCESS] = t->tim[2];
356 sossi.clk_tw1[WR_ACCESS] = t->tim[3];
358 sossi.clk_div = t->tim[4];
361 static void sossi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
363 *clk_period = HZ_TO_PS(sossi.fck_hz);
364 *max_clk_div = 8;
367 static void sossi_set_bits_per_cycle(int bpc)
369 int bus_pick_count, bus_pick_width;
372 * We set explicitly the the bus_pick_count as well, although
373 * with remapping/reordering disabled it will be calculated by HW
374 * as (32 / bus_pick_width).
376 switch (bpc) {
377 case 8:
378 bus_pick_count = 4;
379 bus_pick_width = 8;
380 break;
381 case 16:
382 bus_pick_count = 2;
383 bus_pick_width = 16;
384 break;
385 default:
386 BUG();
387 return;
389 sossi.bus_pick_width = bus_pick_width;
390 sossi.bus_pick_count = bus_pick_count;
393 static int sossi_setup_tearsync(unsigned pin_cnt,
394 unsigned hs_pulse_time, unsigned vs_pulse_time,
395 int hs_pol_inv, int vs_pol_inv, int div)
397 int hs, vs;
398 u32 l;
400 if (pin_cnt != 1 || div < 1 || div > 8)
401 return -EINVAL;
403 hs = ps_to_sossi_ticks(hs_pulse_time, div);
404 vs = ps_to_sossi_ticks(vs_pulse_time, div);
405 if (vs < 8 || vs <= hs || vs >= (1 << 12))
406 return -EDOM;
407 vs /= 8;
408 vs--;
409 if (hs > 8)
410 hs = 8;
411 if (hs)
412 hs--;
414 dev_dbg(sossi.fbdev->dev,
415 "setup_tearsync: hs %d vs %d hs_inv %d vs_inv %d\n",
416 hs, vs, hs_pol_inv, vs_pol_inv);
418 clk_enable(sossi.fck);
419 l = sossi_read_reg(SOSSI_TEARING_REG);
420 l &= ~((1 << 15) - 1);
421 l |= vs << 3;
422 l |= hs;
423 if (hs_pol_inv)
424 l |= 1 << 29;
425 else
426 l &= ~(1 << 29);
427 if (vs_pol_inv)
428 l |= 1 << 28;
429 else
430 l &= ~(1 << 28);
431 sossi_write_reg(SOSSI_TEARING_REG, l);
432 clk_disable(sossi.fck);
434 return 0;
437 static int sossi_enable_tearsync(int enable, unsigned line)
439 int mode;
441 dev_dbg(sossi.fbdev->dev, "tearsync %d line %d\n", enable, line);
442 if (line >= 1 << 11)
443 return -EINVAL;
444 if (enable) {
445 if (line)
446 mode = 2; /* HS or VS */
447 else
448 mode = 3; /* VS only */
449 } else
450 mode = 0;
451 sossi.tearsync_line = line;
452 sossi.tearsync_mode = mode;
454 return 0;
457 static void sossi_write_command(const void *data, unsigned int len)
459 clk_enable(sossi.fck);
460 set_timing(WR_ACCESS);
461 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
462 /* CMD#/DATA */
463 sossi_clear_bits(SOSSI_INIT1_REG, 1 << 18);
464 set_cycles(len);
465 sossi_start_transfer();
466 send_data(data, len);
467 sossi_stop_transfer();
468 wait_end_of_write();
469 clk_disable(sossi.fck);
472 static void sossi_write_data(const void *data, unsigned int len)
474 clk_enable(sossi.fck);
475 set_timing(WR_ACCESS);
476 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
477 /* CMD#/DATA */
478 sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
479 set_cycles(len);
480 sossi_start_transfer();
481 send_data(data, len);
482 sossi_stop_transfer();
483 wait_end_of_write();
484 clk_disable(sossi.fck);
487 static void sossi_transfer_area(int width, int height,
488 void (callback)(void *data), void *data)
490 BUG_ON(callback == NULL);
492 sossi.lcdc_callback = callback;
493 sossi.lcdc_callback_data = data;
495 clk_enable(sossi.fck);
496 set_timing(WR_ACCESS);
497 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
498 _set_tearsync_mode(sossi.tearsync_mode, sossi.tearsync_line);
499 /* CMD#/DATA */
500 sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
501 set_cycles(width * height * sossi.bus_pick_width / 8);
503 sossi_start_transfer();
504 if (sossi.tearsync_mode) {
506 * Wait for the sync signal and start the transfer only
507 * then. We can't seem to be able to use HW sync DMA for
508 * this since LCD DMA shows huge latencies, as if it
509 * would ignore some of the DMA requests from SoSSI.
511 unsigned long flags;
513 spin_lock_irqsave(&sossi.lock, flags);
514 sossi.vsync_dma_pending++;
515 spin_unlock_irqrestore(&sossi.lock, flags);
516 } else
517 /* Just start the transfer right away. */
518 omap_enable_lcd_dma();
521 static void sossi_dma_callback(void *data)
523 omap_stop_lcd_dma();
524 sossi_stop_transfer();
525 clk_disable(sossi.fck);
526 sossi.lcdc_callback(sossi.lcdc_callback_data);
529 static void sossi_read_data(void *data, unsigned int len)
531 clk_enable(sossi.fck);
532 set_timing(RD_ACCESS);
533 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
534 /* CMD#/DATA */
535 sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
536 set_cycles(len);
537 sossi_start_transfer();
538 while (len >= 4) {
539 *(u32 *) data = sossi_read_reg(SOSSI_FIFO_REG);
540 len -= 4;
541 data += 4;
543 while (len >= 2) {
544 *(u16 *) data = sossi_read_reg16(SOSSI_FIFO_REG);
545 len -= 2;
546 data += 2;
548 while (len) {
549 *(u8 *) data = sossi_read_reg8(SOSSI_FIFO_REG);
550 len--;
551 data++;
553 sossi_stop_transfer();
554 clk_disable(sossi.fck);
557 static irqreturn_t sossi_match_irq(int irq, void *data)
559 unsigned long flags;
561 spin_lock_irqsave(&sossi.lock, flags);
562 if (sossi.vsync_dma_pending) {
563 sossi.vsync_dma_pending--;
564 omap_enable_lcd_dma();
566 spin_unlock_irqrestore(&sossi.lock, flags);
567 return IRQ_HANDLED;
570 static int sossi_init(struct omapfb_device *fbdev)
572 u32 l, k;
573 struct clk *fck;
574 struct clk *dpll1out_ck;
575 int r;
577 sossi.base = (void __iomem *)IO_ADDRESS(OMAP_SOSSI_BASE);
578 sossi.fbdev = fbdev;
579 spin_lock_init(&sossi.lock);
581 dpll1out_ck = clk_get(fbdev->dev, "ck_dpll1out");
582 if (IS_ERR(dpll1out_ck)) {
583 dev_err(fbdev->dev, "can't get DPLL1OUT clock\n");
584 return PTR_ERR(dpll1out_ck);
587 * We need the parent clock rate, which we might divide further
588 * depending on the timing requirements of the controller. See
589 * _set_timings.
591 sossi.fck_hz = clk_get_rate(dpll1out_ck);
592 clk_put(dpll1out_ck);
594 fck = clk_get(fbdev->dev, "ck_sossi");
595 if (IS_ERR(fck)) {
596 dev_err(fbdev->dev, "can't get SoSSI functional clock\n");
597 return PTR_ERR(fck);
599 sossi.fck = fck;
601 /* Reset and enable the SoSSI module */
602 l = omap_readl(MOD_CONF_CTRL_1);
603 l |= CONF_SOSSI_RESET_R;
604 omap_writel(l, MOD_CONF_CTRL_1);
605 l &= ~CONF_SOSSI_RESET_R;
606 omap_writel(l, MOD_CONF_CTRL_1);
608 clk_enable(sossi.fck);
609 l = omap_readl(ARM_IDLECT2);
610 l &= ~(1 << 8); /* DMACK_REQ */
611 omap_writel(l, ARM_IDLECT2);
613 l = sossi_read_reg(SOSSI_INIT2_REG);
614 /* Enable and reset the SoSSI block */
615 l |= (1 << 0) | (1 << 1);
616 sossi_write_reg(SOSSI_INIT2_REG, l);
617 /* Take SoSSI out of reset */
618 l &= ~(1 << 1);
619 sossi_write_reg(SOSSI_INIT2_REG, l);
621 sossi_write_reg(SOSSI_ID_REG, 0);
622 l = sossi_read_reg(SOSSI_ID_REG);
623 k = sossi_read_reg(SOSSI_ID_REG);
625 if (l != 0x55555555 || k != 0xaaaaaaaa) {
626 dev_err(fbdev->dev,
627 "invalid SoSSI sync pattern: %08x, %08x\n", l, k);
628 r = -ENODEV;
629 goto err;
632 if ((r = omap_lcdc_set_dma_callback(sossi_dma_callback, NULL)) < 0) {
633 dev_err(fbdev->dev, "can't get LCDC IRQ\n");
634 r = -ENODEV;
635 goto err;
638 l = sossi_read_reg(SOSSI_ID_REG); /* Component code */
639 l = sossi_read_reg(SOSSI_ID_REG);
640 dev_info(fbdev->dev, "SoSSI version %d.%d initialized\n",
641 l >> 16, l & 0xffff);
643 l = sossi_read_reg(SOSSI_INIT1_REG);
644 l |= (1 << 19); /* DMA_MODE */
645 l &= ~(1 << 31); /* REORDERING */
646 sossi_write_reg(SOSSI_INIT1_REG, l);
648 if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
649 IRQT_FALLING,
650 "sossi_match", sossi.fbdev->dev)) < 0) {
651 dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
652 goto err;
655 clk_disable(sossi.fck);
656 return 0;
658 err:
659 clk_disable(sossi.fck);
660 clk_put(sossi.fck);
661 return r;
664 static void sossi_cleanup(void)
666 omap_lcdc_free_dma_callback();
667 clk_put(sossi.fck);
670 struct lcd_ctrl_extif omap1_ext_if = {
671 .init = sossi_init,
672 .cleanup = sossi_cleanup,
673 .get_clk_info = sossi_get_clk_info,
674 .convert_timings = sossi_convert_timings,
675 .set_timings = sossi_set_timings,
676 .set_bits_per_cycle = sossi_set_bits_per_cycle,
677 .setup_tearsync = sossi_setup_tearsync,
678 .enable_tearsync = sossi_enable_tearsync,
679 .write_command = sossi_write_command,
680 .read_data = sossi_read_data,
681 .write_data = sossi_write_data,
682 .transfer_area = sossi_transfer_area,
684 .max_transmit_size = SOSSI_MAX_XMIT_BYTES,