?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / drivers / scsi / lpfc / lpfc_scsi.c
blob70255c11d3adde772d88f8288441c8fed324b98e
1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2008 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
6 * www.emulex.com *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
8 * *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
21
22 #include <linux/pci.h>
23 #include <linux/interrupt.h>
24 #include <linux/delay.h>
25
26 #include <scsi/scsi.h>
27 #include <scsi/scsi_device.h>
28 #include <scsi/scsi_host.h>
29 #include <scsi/scsi_tcq.h>
30 #include <scsi/scsi_transport_fc.h>
31
32 #include "lpfc_version.h"
33 #include "lpfc_hw.h"
34 #include "lpfc_sli.h"
35 #include "lpfc_disc.h"
36 #include "lpfc_scsi.h"
37 #include "lpfc.h"
38 #include "lpfc_logmsg.h"
39 #include "lpfc_crtn.h"
40 #include "lpfc_vport.h"
41
42 #define LPFC_RESET_WAIT 2
43 #define LPFC_ABORT_WAIT 2
44
45 /*
46 * This function is called with no lock held when there is a resource
47 * error in driver or in firmware.
48 */
49 void
50 lpfc_adjust_queue_depth(struct lpfc_hba *phba)
51 {
52 unsigned long flags;
53
54 spin_lock_irqsave(&phba->hbalock, flags);
55 atomic_inc(&phba->num_rsrc_err);
56 phba->last_rsrc_error_time = jiffies;
57
58 if ((phba->last_ramp_down_time + QUEUE_RAMP_DOWN_INTERVAL) > jiffies) {
59 spin_unlock_irqrestore(&phba->hbalock, flags);
60 return;
61 }
62
63 phba->last_ramp_down_time = jiffies;
64
65 spin_unlock_irqrestore(&phba->hbalock, flags);
66
67 spin_lock_irqsave(&phba->pport->work_port_lock, flags);
68 if ((phba->pport->work_port_events &
69 WORKER_RAMP_DOWN_QUEUE) == 0) {
70 phba->pport->work_port_events |= WORKER_RAMP_DOWN_QUEUE;
71 }
72 spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
73
74 spin_lock_irqsave(&phba->hbalock, flags);
75 if (phba->work_wait)
76 wake_up(phba->work_wait);
77 spin_unlock_irqrestore(&phba->hbalock, flags);
78
79 return;
80 }
81
82 /*
83 * This function is called with no lock held when there is a successful
84 * SCSI command completion.
85 */
86 static inline void
87 lpfc_rampup_queue_depth(struct lpfc_vport *vport,
88 struct scsi_device *sdev)
89 {
90 unsigned long flags;
91 struct lpfc_hba *phba = vport->phba;
92 atomic_inc(&phba->num_cmd_success);
93
94 if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
95 return;
96 spin_lock_irqsave(&phba->hbalock, flags);
97 if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
98 ((phba->last_rsrc_error_time + QUEUE_RAMP_UP_INTERVAL ) > jiffies)) {
99 spin_unlock_irqrestore(&phba->hbalock, flags);
100 return;
101 }
102 phba->last_ramp_up_time = jiffies;
103 spin_unlock_irqrestore(&phba->hbalock, flags);
104
105 spin_lock_irqsave(&phba->pport->work_port_lock, flags);
106 if ((phba->pport->work_port_events &
107 WORKER_RAMP_UP_QUEUE) == 0) {
108 phba->pport->work_port_events |= WORKER_RAMP_UP_QUEUE;
109 }
110 spin_unlock_irqrestore(&phba->pport->work_port_lock, flags);
111
112 spin_lock_irqsave(&phba->hbalock, flags);
113 if (phba->work_wait)
114 wake_up(phba->work_wait);
115 spin_unlock_irqrestore(&phba->hbalock, flags);
116 }
117
118 void
119 lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
120 {
121 struct lpfc_vport **vports;
122 struct Scsi_Host *shost;
123 struct scsi_device *sdev;
124 unsigned long new_queue_depth;
125 unsigned long num_rsrc_err, num_cmd_success;
126 int i;
127
128 num_rsrc_err = atomic_read(&phba->num_rsrc_err);
129 num_cmd_success = atomic_read(&phba->num_cmd_success);
130
131 vports = lpfc_create_vport_work_array(phba);
132 if (vports != NULL)
133 for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
134 shost = lpfc_shost_from_vport(vports[i]);
135 shost_for_each_device(sdev, shost) {
136 new_queue_depth =
137 sdev->queue_depth * num_rsrc_err /
138 (num_rsrc_err + num_cmd_success);
139 if (!new_queue_depth)
140 new_queue_depth = sdev->queue_depth - 1;
141 else
142 new_queue_depth = sdev->queue_depth -
143 new_queue_depth;
144 if (sdev->ordered_tags)
145 scsi_adjust_queue_depth(sdev,
146 MSG_ORDERED_TAG,
147 new_queue_depth);
148 else
149 scsi_adjust_queue_depth(sdev,
150 MSG_SIMPLE_TAG,
151 new_queue_depth);
152 }
153 }
154 lpfc_destroy_vport_work_array(phba, vports);
155 atomic_set(&phba->num_rsrc_err, 0);
156 atomic_set(&phba->num_cmd_success, 0);
157 }
158
159 void
160 lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
161 {
162 struct lpfc_vport **vports;
163 struct Scsi_Host *shost;
164 struct scsi_device *sdev;
165 int i;
166
167 vports = lpfc_create_vport_work_array(phba);
168 if (vports != NULL)
169 for(i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
170 shost = lpfc_shost_from_vport(vports[i]);
171 shost_for_each_device(sdev, shost) {
172 if (sdev->ordered_tags)
173 scsi_adjust_queue_depth(sdev,
174 MSG_ORDERED_TAG,
175 sdev->queue_depth+1);
176 else
177 scsi_adjust_queue_depth(sdev,
178 MSG_SIMPLE_TAG,
179 sdev->queue_depth+1);
180 }
181 }
182 lpfc_destroy_vport_work_array(phba, vports);
183 atomic_set(&phba->num_rsrc_err, 0);
184 atomic_set(&phba->num_cmd_success, 0);
185 }
186
187 /*
188 * This routine allocates a scsi buffer, which contains all the necessary
189 * information needed to initiate a SCSI I/O. The non-DMAable buffer region
190 * contains information to build the IOCB. The DMAable region contains
191 * memory for the FCP CMND, FCP RSP, and the inital BPL. In addition to
192 * allocating memeory, the FCP CMND and FCP RSP BDEs are setup in the BPL
193 * and the BPL BDE is setup in the IOCB.
194 */
195 static struct lpfc_scsi_buf *
196 lpfc_new_scsi_buf(struct lpfc_vport *vport)
197 {
198 struct lpfc_hba *phba = vport->phba;
199 struct lpfc_scsi_buf *psb;
200 struct ulp_bde64 *bpl;
201 IOCB_t *iocb;
202 dma_addr_t pdma_phys;
203 uint16_t iotag;
204
205 psb = kzalloc(sizeof(struct lpfc_scsi_buf), GFP_KERNEL);
206 if (!psb)
207 return NULL;
208
209 /*
210 * Get memory from the pci pool to map the virt space to pci bus space
211 * for an I/O. The DMA buffer includes space for the struct fcp_cmnd,
212 * struct fcp_rsp and the number of bde's necessary to support the
213 * sg_tablesize.
214 */
215 psb->data = pci_pool_alloc(phba->lpfc_scsi_dma_buf_pool, GFP_KERNEL,
216 &psb->dma_handle);
217 if (!psb->data) {
218 kfree(psb);
219 return NULL;
220 }
221
222 /* Initialize virtual ptrs to dma_buf region. */
223 memset(psb->data, 0, phba->cfg_sg_dma_buf_size);
224
225 /* Allocate iotag for psb->cur_iocbq. */
226 iotag = lpfc_sli_next_iotag(phba, &psb->cur_iocbq);
227 if (iotag == 0) {
228 pci_pool_free(phba->lpfc_scsi_dma_buf_pool,
229 psb->data, psb->dma_handle);
230 kfree (psb);
231 return NULL;
232 }
233 psb->cur_iocbq.iocb_flag |= LPFC_IO_FCP;
234
235 psb->fcp_cmnd = psb->data;
236 psb->fcp_rsp = psb->data + sizeof(struct fcp_cmnd);
237 psb->fcp_bpl = psb->data + sizeof(struct fcp_cmnd) +
238 sizeof(struct fcp_rsp);
239
240 /* Initialize local short-hand pointers. */
241 bpl = psb->fcp_bpl;
242 pdma_phys = psb->dma_handle;
243
244 /*
245 * The first two bdes are the FCP_CMD and FCP_RSP. The balance are sg
246 * list bdes. Initialize the first two and leave the rest for
247 * queuecommand.
248 */
249 bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
250 bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
251 bpl->tus.f.bdeSize = sizeof (struct fcp_cmnd);
252 bpl->tus.f.bdeFlags = BUFF_USE_CMND;
253 bpl->tus.w = le32_to_cpu(bpl->tus.w);
254 bpl++;
255
256 /* Setup the physical region for the FCP RSP */
257 pdma_phys += sizeof (struct fcp_cmnd);
258 bpl->addrHigh = le32_to_cpu(putPaddrHigh(pdma_phys));
259 bpl->addrLow = le32_to_cpu(putPaddrLow(pdma_phys));
260 bpl->tus.f.bdeSize = sizeof (struct fcp_rsp);
261 bpl->tus.f.bdeFlags = (BUFF_USE_CMND | BUFF_USE_RCV);
262 bpl->tus.w = le32_to_cpu(bpl->tus.w);
263
264 /*
265 * Since the IOCB for the FCP I/O is built into this lpfc_scsi_buf,
266 * initialize it with all known data now.
267 */
268 pdma_phys += (sizeof (struct fcp_rsp));
269 iocb = &psb->cur_iocbq.iocb;
270 iocb->un.fcpi64.bdl.ulpIoTag32 = 0;
271 iocb->un.fcpi64.bdl.addrHigh = putPaddrHigh(pdma_phys);
272 iocb->un.fcpi64.bdl.addrLow = putPaddrLow(pdma_phys);
273 iocb->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
274 iocb->un.fcpi64.bdl.bdeFlags = BUFF_TYPE_BDL;
275 iocb->ulpBdeCount = 1;
276 iocb->ulpClass = CLASS3;
277
278 return psb;
279 }
280
281 static struct lpfc_scsi_buf*
282 lpfc_get_scsi_buf(struct lpfc_hba * phba)
283 {
284 struct lpfc_scsi_buf * lpfc_cmd = NULL;
285 struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
286 unsigned long iflag = 0;
287
288 spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
289 list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
290 if (lpfc_cmd) {
291 lpfc_cmd->seg_cnt = 0;
292 lpfc_cmd->nonsg_phys = 0;
293 }
294 spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
295 return lpfc_cmd;
296 }
297
298 static void
299 lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
300 {
301 unsigned long iflag = 0;
302
303 spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
304 psb->pCmd = NULL;
305 list_add_tail(&psb->list, &phba->lpfc_scsi_buf_list);
306 spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
307 }
308
309 static int
310 lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
311 {
312 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
313 struct scatterlist *sgel = NULL;
314 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
315 struct ulp_bde64 *bpl = lpfc_cmd->fcp_bpl;
316 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
317 dma_addr_t physaddr;
318 uint32_t i, num_bde = 0;
319 int nseg, datadir = scsi_cmnd->sc_data_direction;
320
321 /*
322 * There are three possibilities here - use scatter-gather segment, use
323 * the single mapping, or neither. Start the lpfc command prep by
324 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
325 * data bde entry.
326 */
327 bpl += 2;
328 if (scsi_sg_count(scsi_cmnd)) {
329 /*
330 * The driver stores the segment count returned from pci_map_sg
331 * because this a count of dma-mappings used to map the use_sg
332 * pages. They are not guaranteed to be the same for those
333 * architectures that implement an IOMMU.
334 */
335
336 nseg = dma_map_sg(&phba->pcidev->dev, scsi_sglist(scsi_cmnd),
337 scsi_sg_count(scsi_cmnd), datadir);
338 if (unlikely(!nseg))
339 return 1;
340
341 lpfc_cmd->seg_cnt = nseg;
342 if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
343 printk(KERN_ERR "%s: Too many sg segments from "
344 "dma_map_sg. Config %d, seg_cnt %d",
345 __FUNCTION__, phba->cfg_sg_seg_cnt,
346 lpfc_cmd->seg_cnt);
347 scsi_dma_unmap(scsi_cmnd);
348 return 1;
349 }
350
351 /*
352 * The driver established a maximum scatter-gather segment count
353 * during probe that limits the number of sg elements in any
354 * single scsi command. Just run through the seg_cnt and format
355 * the bde's.
356 */
357 scsi_for_each_sg(scsi_cmnd, sgel, nseg, i) {
358 physaddr = sg_dma_address(sgel);
359 bpl->addrLow = le32_to_cpu(putPaddrLow(physaddr));
360 bpl->addrHigh = le32_to_cpu(putPaddrHigh(physaddr));
361 bpl->tus.f.bdeSize = sg_dma_len(sgel);
362 if (datadir == DMA_TO_DEVICE)
363 bpl->tus.f.bdeFlags = 0;
364 else
365 bpl->tus.f.bdeFlags = BUFF_USE_RCV;
366 bpl->tus.w = le32_to_cpu(bpl->tus.w);
367 bpl++;
368 num_bde++;
369 }
370 }
371
372 /*
373 * Finish initializing those IOCB fields that are dependent on the
374 * scsi_cmnd request_buffer. Note that the bdeSize is explicitly
375 * reinitialized since all iocb memory resources are used many times
376 * for transmit, receive, and continuation bpl's.
377 */
378 iocb_cmd->un.fcpi64.bdl.bdeSize = (2 * sizeof (struct ulp_bde64));
379 iocb_cmd->un.fcpi64.bdl.bdeSize +=
380 (num_bde * sizeof (struct ulp_bde64));
381 iocb_cmd->ulpBdeCount = 1;
382 iocb_cmd->ulpLe = 1;
383 fcp_cmnd->fcpDl = cpu_to_be32(scsi_bufflen(scsi_cmnd));
384 return 0;
385 }
386
387 static void
388 lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
389 {
390 /*
391 * There are only two special cases to consider. (1) the scsi command
392 * requested scatter-gather usage or (2) the scsi command allocated
393 * a request buffer, but did not request use_sg. There is a third
394 * case, but it does not require resource deallocation.
395 */
396 if (psb->seg_cnt > 0)
397 scsi_dma_unmap(psb->pCmd);
398 }
399
400 static void
401 lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
402 struct lpfc_iocbq *rsp_iocb)
403 {
404 struct scsi_cmnd *cmnd = lpfc_cmd->pCmd;
405 struct fcp_cmnd *fcpcmd = lpfc_cmd->fcp_cmnd;
406 struct fcp_rsp *fcprsp = lpfc_cmd->fcp_rsp;
407 uint32_t fcpi_parm = rsp_iocb->iocb.un.fcpi.fcpi_parm;
408 uint32_t resp_info = fcprsp->rspStatus2;
409 uint32_t scsi_status = fcprsp->rspStatus3;
410 uint32_t *lp;
411 uint32_t host_status = DID_OK;
412 uint32_t rsplen = 0;
413 uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
414
415 /*
416 * If this is a task management command, there is no
417 * scsi packet associated with this lpfc_cmd. The driver
418 * consumes it.
419 */
420 if (fcpcmd->fcpCntl2) {
421 scsi_status = 0;
422 goto out;
423 }
424
425 if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
426 uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
427 if (snslen > SCSI_SENSE_BUFFERSIZE)
428 snslen = SCSI_SENSE_BUFFERSIZE;
429
430 if (resp_info & RSP_LEN_VALID)
431 rsplen = be32_to_cpu(fcprsp->rspRspLen);
432 memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
433 }
434 lp = (uint32_t *)cmnd->sense_buffer;
435
436 if (!scsi_status && (resp_info & RESID_UNDER))
437 logit = LOG_FCP;
438
439 lpfc_printf_vlog(vport, KERN_WARNING, logit,
440 "0730 FCP command x%x failed: x%x SNS x%x x%x "
441 "Data: x%x x%x x%x x%x x%x\n",
442 cmnd->cmnd[0], scsi_status,
443 be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
444 be32_to_cpu(fcprsp->rspResId),
445 be32_to_cpu(fcprsp->rspSnsLen),
446 be32_to_cpu(fcprsp->rspRspLen),
447 fcprsp->rspInfo3);
448
449 if (resp_info & RSP_LEN_VALID) {
450 rsplen = be32_to_cpu(fcprsp->rspRspLen);
451 if ((rsplen != 0 && rsplen != 4 && rsplen != 8) ||
452 (fcprsp->rspInfo3 != RSP_NO_FAILURE)) {
453 host_status = DID_ERROR;
454 goto out;
455 }
456 }
457
458 scsi_set_resid(cmnd, 0);
459 if (resp_info & RESID_UNDER) {
460 scsi_set_resid(cmnd, be32_to_cpu(fcprsp->rspResId));
461
462 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
463 "0716 FCP Read Underrun, expected %d, "
464 "residual %d Data: x%x x%x x%x\n",
465 be32_to_cpu(fcpcmd->fcpDl),
466 scsi_get_resid(cmnd), fcpi_parm, cmnd->cmnd[0],
467 cmnd->underflow);
468
469 /*
470 * If there is an under run check if under run reported by
471 * storage array is same as the under run reported by HBA.
472 * If this is not same, there is a dropped frame.
473 */
474 if ((cmnd->sc_data_direction == DMA_FROM_DEVICE) &&
475 fcpi_parm &&
476 (scsi_get_resid(cmnd) != fcpi_parm)) {
477 lpfc_printf_vlog(vport, KERN_WARNING,
478 LOG_FCP | LOG_FCP_ERROR,
479 "0735 FCP Read Check Error "
480 "and Underrun Data: x%x x%x x%x x%x\n",
481 be32_to_cpu(fcpcmd->fcpDl),
482 scsi_get_resid(cmnd), fcpi_parm,
483 cmnd->cmnd[0]);
484 scsi_set_resid(cmnd, scsi_bufflen(cmnd));
485 host_status = DID_ERROR;
486 }
487 /*
488 * The cmnd->underflow is the minimum number of bytes that must
489 * be transfered for this command. Provided a sense condition
490 * is not present, make sure the actual amount transferred is at
491 * least the underflow value or fail.
492 */
493 if (!(resp_info & SNS_LEN_VALID) &&
494 (scsi_status == SAM_STAT_GOOD) &&
495 (scsi_bufflen(cmnd) - scsi_get_resid(cmnd)
496 < cmnd->underflow)) {
497 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
498 "0717 FCP command x%x residual "
499 "underrun converted to error "
500 "Data: x%x x%x x%x\n",
501 cmnd->cmnd[0], scsi_bufflen(cmnd),
502 scsi_get_resid(cmnd), cmnd->underflow);
503 host_status = DID_ERROR;
504 }
505 } else if (resp_info & RESID_OVER) {
506 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
507 "0720 FCP command x%x residual overrun error. "
508 "Data: x%x x%x \n", cmnd->cmnd[0],
509 scsi_bufflen(cmnd), scsi_get_resid(cmnd));
510 host_status = DID_ERROR;
511
512 /*
513 * Check SLI validation that all the transfer was actually done
514 * (fcpi_parm should be zero). Apply check only to reads.
515 */
516 } else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
517 (cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
518 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
519 "0734 FCP Read Check Error Data: "
520 "x%x x%x x%x x%x\n",
521 be32_to_cpu(fcpcmd->fcpDl),
522 be32_to_cpu(fcprsp->rspResId),
523 fcpi_parm, cmnd->cmnd[0]);
524 host_status = DID_ERROR;
525 scsi_set_resid(cmnd, scsi_bufflen(cmnd));
526 }
527
528 out:
529 cmnd->result = ScsiResult(host_status, scsi_status);
530 }
531
532 static void
533 lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
534 struct lpfc_iocbq *pIocbOut)
535 {
536 struct lpfc_scsi_buf *lpfc_cmd =
537 (struct lpfc_scsi_buf *) pIocbIn->context1;
538 struct lpfc_vport *vport = pIocbIn->vport;
539 struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
540 struct lpfc_nodelist *pnode = rdata->pnode;
541 struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
542 int result;
543 struct scsi_device *sdev, *tmp_sdev;
544 int depth = 0;
545 unsigned long flags;
546
547 lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
548 lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
549
550 if (lpfc_cmd->status) {
551 if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
552 (lpfc_cmd->result & IOERR_DRVR_MASK))
553 lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
554 else if (lpfc_cmd->status >= IOSTAT_CNT)
555 lpfc_cmd->status = IOSTAT_DEFAULT;
556
557 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
558 "0729 FCP cmd x%x failed <%d/%d> "
559 "status: x%x result: x%x Data: x%x x%x\n",
560 cmd->cmnd[0],
561 cmd->device ? cmd->device->id : 0xffff,
562 cmd->device ? cmd->device->lun : 0xffff,
563 lpfc_cmd->status, lpfc_cmd->result,
564 pIocbOut->iocb.ulpContext,
565 lpfc_cmd->cur_iocbq.iocb.ulpIoTag);
566
567 switch (lpfc_cmd->status) {
568 case IOSTAT_FCP_RSP_ERROR:
569 /* Call FCP RSP handler to determine result */
570 lpfc_handle_fcp_err(vport, lpfc_cmd, pIocbOut);
571 break;
572 case IOSTAT_NPORT_BSY:
573 case IOSTAT_FABRIC_BSY:
574 cmd->result = ScsiResult(DID_BUS_BUSY, 0);
575 break;
576 case IOSTAT_LOCAL_REJECT:
577 if (lpfc_cmd->result == RJT_UNAVAIL_PERM ||
578 lpfc_cmd->result == IOERR_NO_RESOURCES ||
579 lpfc_cmd->result == RJT_LOGIN_REQUIRED) {
580 cmd->result = ScsiResult(DID_REQUEUE, 0);
581 break;
582 } /* else: fall through */
583 default:
584 cmd->result = ScsiResult(DID_ERROR, 0);
585 break;
586 }
587
588 if ((pnode == NULL )
589 || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
590 cmd->result = ScsiResult(DID_BUS_BUSY, SAM_STAT_BUSY);
591 } else {
592 cmd->result = ScsiResult(DID_OK, 0);
593 }
594
595 if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
596 uint32_t *lp = (uint32_t *)cmd->sense_buffer;
597
598 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
599 "0710 Iodone <%d/%d> cmd %p, error "
600 "x%x SNS x%x x%x Data: x%x x%x\n",
601 cmd->device->id, cmd->device->lun, cmd,
602 cmd->result, *lp, *(lp + 3), cmd->retries,
603 scsi_get_resid(cmd));
604 }
605
606 result = cmd->result;
607 sdev = cmd->device;
608 lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
609 cmd->scsi_done(cmd);
610
611 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
612 /*
613 * If there is a thread waiting for command completion
614 * wake up the thread.
615 */
616 spin_lock_irqsave(sdev->host->host_lock, flags);
617 lpfc_cmd->pCmd = NULL;
618 if (lpfc_cmd->waitq)
619 wake_up(lpfc_cmd->waitq);
620 spin_unlock_irqrestore(sdev->host->host_lock, flags);
621 lpfc_release_scsi_buf(phba, lpfc_cmd);
622 return;
623 }
624
625
626 if (!result)
627 lpfc_rampup_queue_depth(vport, sdev);
628
629 if (!result && pnode != NULL &&
630 ((jiffies - pnode->last_ramp_up_time) >
631 LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
632 ((jiffies - pnode->last_q_full_time) >
633 LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
634 (vport->cfg_lun_queue_depth > sdev->queue_depth)) {
635 shost_for_each_device(tmp_sdev, sdev->host) {
636 if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
637 if (tmp_sdev->id != sdev->id)
638 continue;
639 if (tmp_sdev->ordered_tags)
640 scsi_adjust_queue_depth(tmp_sdev,
641 MSG_ORDERED_TAG,
642 tmp_sdev->queue_depth+1);
643 else
644 scsi_adjust_queue_depth(tmp_sdev,
645 MSG_SIMPLE_TAG,
646 tmp_sdev->queue_depth+1);
647
648 pnode->last_ramp_up_time = jiffies;
649 }
650 }
651 }
652
653 /*
654 * Check for queue full. If the lun is reporting queue full, then
655 * back off the lun queue depth to prevent target overloads.
656 */
657 if (result == SAM_STAT_TASK_SET_FULL && pnode != NULL) {
658 pnode->last_q_full_time = jiffies;
659
660 shost_for_each_device(tmp_sdev, sdev->host) {
661 if (tmp_sdev->id != sdev->id)
662 continue;
663 depth = scsi_track_queue_full(tmp_sdev,
664 tmp_sdev->queue_depth - 1);
665 }
666 /*
667 * The queue depth cannot be lowered any more.
668 * Modify the returned error code to store
669 * the final depth value set by
670 * scsi_track_queue_full.
671 */
672 if (depth == -1)
673 depth = sdev->host->cmd_per_lun;
674
675 if (depth) {
676 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
677 "0711 detected queue full - lun queue "
678 "depth adjusted to %d.\n", depth);
679 }
680 }
681
682 /*
683 * If there is a thread waiting for command completion
684 * wake up the thread.
685 */
686 spin_lock_irqsave(sdev->host->host_lock, flags);
687 lpfc_cmd->pCmd = NULL;
688 if (lpfc_cmd->waitq)
689 wake_up(lpfc_cmd->waitq);
690 spin_unlock_irqrestore(sdev->host->host_lock, flags);
691
692 lpfc_release_scsi_buf(phba, lpfc_cmd);
693 }
694
695 static void
696 lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
697 struct lpfc_nodelist *pnode)
698 {
699 struct lpfc_hba *phba = vport->phba;
700 struct scsi_cmnd *scsi_cmnd = lpfc_cmd->pCmd;
701 struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
702 IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
703 struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
704 int datadir = scsi_cmnd->sc_data_direction;
705 char tag[2];
706
707 lpfc_cmd->fcp_rsp->rspSnsLen = 0;
708 /* clear task management bits */
709 lpfc_cmd->fcp_cmnd->fcpCntl2 = 0;
710
711 int_to_scsilun(lpfc_cmd->pCmd->device->lun,
712 &lpfc_cmd->fcp_cmnd->fcp_lun);
713
714 memcpy(&fcp_cmnd->fcpCdb[0], scsi_cmnd->cmnd, 16);
715
716 if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
717 switch (tag[0]) {
718 case HEAD_OF_QUEUE_TAG:
719 fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
720 break;
721 case ORDERED_QUEUE_TAG:
722 fcp_cmnd->fcpCntl1 = ORDERED_Q;
723 break;
724 default:
725 fcp_cmnd->fcpCntl1 = SIMPLE_Q;
726 break;
727 }
728 } else
729 fcp_cmnd->fcpCntl1 = 0;
730
731 /*
732 * There are three possibilities here - use scatter-gather segment, use
733 * the single mapping, or neither. Start the lpfc command prep by
734 * bumping the bpl beyond the fcp_cmnd and fcp_rsp regions to the first
735 * data bde entry.
736 */
737 if (scsi_sg_count(scsi_cmnd)) {
738 if (datadir == DMA_TO_DEVICE) {
739 iocb_cmd->ulpCommand = CMD_FCP_IWRITE64_CR;
740 iocb_cmd->un.fcpi.fcpi_parm = 0;
741 iocb_cmd->ulpPU = 0;
742 fcp_cmnd->fcpCntl3 = WRITE_DATA;
743 phba->fc4OutputRequests++;
744 } else {
745 iocb_cmd->ulpCommand = CMD_FCP_IREAD64_CR;
746 iocb_cmd->ulpPU = PARM_READ_CHECK;
747 iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
748 fcp_cmnd->fcpCntl3 = READ_DATA;
749 phba->fc4InputRequests++;
750 }
751 } else {
752 iocb_cmd->ulpCommand = CMD_FCP_ICMND64_CR;
753 iocb_cmd->un.fcpi.fcpi_parm = 0;
754 iocb_cmd->ulpPU = 0;
755 fcp_cmnd->fcpCntl3 = 0;
756 phba->fc4ControlRequests++;
757 }
758
759 /*
760 * Finish initializing those IOCB fields that are independent
761 * of the scsi_cmnd request_buffer
762 */
763 piocbq->iocb.ulpContext = pnode->nlp_rpi;
764 if (pnode->nlp_fcp_info & NLP_FCP_2_DEVICE)
765 piocbq->iocb.ulpFCP2Rcvy = 1;
766 else
767 piocbq->iocb.ulpFCP2Rcvy = 0;
768
769 piocbq->iocb.ulpClass = (pnode->nlp_fcp_info & 0x0f);
770 piocbq->context1 = lpfc_cmd;
771 piocbq->iocb_cmpl = lpfc_scsi_cmd_iocb_cmpl;
772 piocbq->iocb.ulpTimeout = lpfc_cmd->timeout;
773 piocbq->vport = vport;
774 }
775
776 static int
777 lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
778 struct lpfc_scsi_buf *lpfc_cmd,
779 unsigned int lun,
780 uint8_t task_mgmt_cmd)
781 {
782 struct lpfc_iocbq *piocbq;
783 IOCB_t *piocb;
784 struct fcp_cmnd *fcp_cmnd;
785 struct lpfc_rport_data *rdata = lpfc_cmd->rdata;
786 struct lpfc_nodelist *ndlp = rdata->pnode;
787
788 if ((ndlp == NULL) || (ndlp->nlp_state != NLP_STE_MAPPED_NODE)) {
789 return 0;
790 }
791
792 piocbq = &(lpfc_cmd->cur_iocbq);
793 piocbq->vport = vport;
794
795 piocb = &piocbq->iocb;
796
797 fcp_cmnd = lpfc_cmd->fcp_cmnd;
798 int_to_scsilun(lun, &lpfc_cmd->fcp_cmnd->fcp_lun);
799 fcp_cmnd->fcpCntl2 = task_mgmt_cmd;
800
801 piocb->ulpCommand = CMD_FCP_ICMND64_CR;
802
803 piocb->ulpContext = ndlp->nlp_rpi;
804 if (ndlp->nlp_fcp_info & NLP_FCP_2_DEVICE) {
805 piocb->ulpFCP2Rcvy = 1;
806 }
807 piocb->ulpClass = (ndlp->nlp_fcp_info & 0x0f);
808
809 /* ulpTimeout is only one byte */
810 if (lpfc_cmd->timeout > 0xff) {
811 /*
812 * Do not timeout the command at the firmware level.
813 * The driver will provide the timeout mechanism.
814 */
815 piocb->ulpTimeout = 0;
816 } else {
817 piocb->ulpTimeout = lpfc_cmd->timeout;
818 }
819
820 return 1;
821 }
822
823 static void
824 lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
825 struct lpfc_iocbq *cmdiocbq,
826 struct lpfc_iocbq *rspiocbq)
827 {
828 struct lpfc_scsi_buf *lpfc_cmd =
829 (struct lpfc_scsi_buf *) cmdiocbq->context1;
830 if (lpfc_cmd)
831 lpfc_release_scsi_buf(phba, lpfc_cmd);
832 return;
833 }
834
835 static int
836 lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
837 unsigned tgt_id, unsigned int lun,
838 struct lpfc_rport_data *rdata)
839 {
840 struct lpfc_hba *phba = vport->phba;
841 struct lpfc_iocbq *iocbq;
842 struct lpfc_iocbq *iocbqrsp;
843 int ret;
844
845 if (!rdata->pnode)
846 return FAILED;
847
848 lpfc_cmd->rdata = rdata;
849 ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, lun,
850 FCP_TARGET_RESET);
851 if (!ret)
852 return FAILED;
853
854 iocbq = &lpfc_cmd->cur_iocbq;
855 iocbqrsp = lpfc_sli_get_iocbq(phba);
856
857 if (!iocbqrsp)
858 return FAILED;
859
860 /* Issue Target Reset to TGT <num> */
861 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
862 "0702 Issue Target Reset to TGT %d Data: x%x x%x\n",
863 tgt_id, rdata->pnode->nlp_rpi, rdata->pnode->nlp_flag);
864 ret = lpfc_sli_issue_iocb_wait(phba,
865 &phba->sli.ring[phba->sli.fcp_ring],
866 iocbq, iocbqrsp, lpfc_cmd->timeout);
867 if (ret != IOCB_SUCCESS) {
868 if (ret == IOCB_TIMEDOUT)
869 iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
870 lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
871 } else {
872 ret = SUCCESS;
873 lpfc_cmd->result = iocbqrsp->iocb.un.ulpWord[4];
874 lpfc_cmd->status = iocbqrsp->iocb.ulpStatus;
875 if (lpfc_cmd->status == IOSTAT_LOCAL_REJECT &&
876 (lpfc_cmd->result & IOERR_DRVR_MASK))
877 lpfc_cmd->status = IOSTAT_DRIVER_REJECT;
878 }
879
880 lpfc_sli_release_iocbq(phba, iocbqrsp);
881 return ret;
882 }
883
884 const char *
885 lpfc_info(struct Scsi_Host *host)
886 {
887 struct lpfc_vport *vport = (struct lpfc_vport *) host->hostdata;
888 struct lpfc_hba *phba = vport->phba;
889 int len;
890 static char lpfcinfobuf[384];
891
892 memset(lpfcinfobuf,0,384);
893 if (phba && phba->pcidev){
894 strncpy(lpfcinfobuf, phba->ModelDesc, 256);
895 len = strlen(lpfcinfobuf);
896 snprintf(lpfcinfobuf + len,
897 384-len,
898 " on PCI bus %02x device %02x irq %d",
899 phba->pcidev->bus->number,
900 phba->pcidev->devfn,
901 phba->pcidev->irq);
902 len = strlen(lpfcinfobuf);
903 if (phba->Port[0]) {
904 snprintf(lpfcinfobuf + len,
905 384-len,
906 " port %s",
907 phba->Port);
908 }
909 }
910 return lpfcinfobuf;
911 }
912
913 static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
914 {
915 unsigned long poll_tmo_expires =
916 (jiffies + msecs_to_jiffies(phba->cfg_poll_tmo));
917
918 if (phba->sli.ring[LPFC_FCP_RING].txcmplq_cnt)
919 mod_timer(&phba->fcp_poll_timer,
920 poll_tmo_expires);
921 }
922
923 void lpfc_poll_start_timer(struct lpfc_hba * phba)
924 {
925 lpfc_poll_rearm_timer(phba);
926 }
927
928 void lpfc_poll_timeout(unsigned long ptr)
929 {
930 struct lpfc_hba *phba = (struct lpfc_hba *) ptr;
931
932 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
933 lpfc_sli_poll_fcp_ring (phba);
934 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
935 lpfc_poll_rearm_timer(phba);
936 }
937 }
938
939 static int
940 lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
941 {
942 struct Scsi_Host *shost = cmnd->device->host;
943 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
944 struct lpfc_hba *phba = vport->phba;
945 struct lpfc_sli *psli = &phba->sli;
946 struct lpfc_rport_data *rdata = cmnd->device->hostdata;
947 struct lpfc_nodelist *ndlp = rdata->pnode;
948 struct lpfc_scsi_buf *lpfc_cmd;
949 struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
950 int err;
951
952 err = fc_remote_port_chkready(rport);
953 if (err) {
954 cmnd->result = err;
955 goto out_fail_command;
956 }
957
958 /*
959 * Catch race where our node has transitioned, but the
960 * transport is still transitioning.
961 */
962 if (!ndlp) {
963 cmnd->result = ScsiResult(DID_BUS_BUSY, 0);
964 goto out_fail_command;
965 }
966 lpfc_cmd = lpfc_get_scsi_buf(phba);
967 if (lpfc_cmd == NULL) {
968 lpfc_adjust_queue_depth(phba);
969
970 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
971 "0707 driver's buffer pool is empty, "
972 "IO busied\n");
973 goto out_host_busy;
974 }
975
976 /*
977 * Store the midlayer's command structure for the completion phase
978 * and complete the command initialization.
979 */
980 lpfc_cmd->pCmd = cmnd;
981 lpfc_cmd->rdata = rdata;
982 lpfc_cmd->timeout = 0;
983 cmnd->host_scribble = (unsigned char *)lpfc_cmd;
984 cmnd->scsi_done = done;
985
986 err = lpfc_scsi_prep_dma_buf(phba, lpfc_cmd);
987 if (err)
988 goto out_host_busy_free_buf;
989
990 lpfc_scsi_prep_cmnd(vport, lpfc_cmd, ndlp);
991
992 err = lpfc_sli_issue_iocb(phba, &phba->sli.ring[psli->fcp_ring],
993 &lpfc_cmd->cur_iocbq, SLI_IOCB_RET_IOCB);
994 if (err)
995 goto out_host_busy_free_buf;
996
997 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
998 lpfc_sli_poll_fcp_ring(phba);
999 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
1000 lpfc_poll_rearm_timer(phba);
1001 }
1002
1003 return 0;
1004
1005 out_host_busy_free_buf:
1006 lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
1007 lpfc_release_scsi_buf(phba, lpfc_cmd);
1008 out_host_busy:
1009 return SCSI_MLQUEUE_HOST_BUSY;
1010
1011 out_fail_command:
1012 done(cmnd);
1013 return 0;
1014 }
1015
1016 static void
1017 lpfc_block_error_handler(struct scsi_cmnd *cmnd)
1018 {
1019 struct Scsi_Host *shost = cmnd->device->host;
1020 struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
1021
1022 spin_lock_irq(shost->host_lock);
1023 while (rport->port_state == FC_PORTSTATE_BLOCKED) {
1024 spin_unlock_irq(shost->host_lock);
1025 msleep(1000);
1026 spin_lock_irq(shost->host_lock);
1027 }
1028 spin_unlock_irq(shost->host_lock);
1029 return;
1030 }
1031
1032 static int
1033 lpfc_abort_handler(struct scsi_cmnd *cmnd)
1034 {
1035 struct Scsi_Host *shost = cmnd->device->host;
1036 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1037 struct lpfc_hba *phba = vport->phba;
1038 struct lpfc_sli_ring *pring = &phba->sli.ring[phba->sli.fcp_ring];
1039 struct lpfc_iocbq *iocb;
1040 struct lpfc_iocbq *abtsiocb;
1041 struct lpfc_scsi_buf *lpfc_cmd;
1042 IOCB_t *cmd, *icmd;
1043 int ret = SUCCESS;
1044 DECLARE_WAIT_QUEUE_HEAD_ONSTACK(waitq);
1045
1046 lpfc_block_error_handler(cmnd);
1047 lpfc_cmd = (struct lpfc_scsi_buf *)cmnd->host_scribble;
1048 BUG_ON(!lpfc_cmd);
1049
1050 /*
1051 * If pCmd field of the corresponding lpfc_scsi_buf structure
1052 * points to a different SCSI command, then the driver has
1053 * already completed this command, but the midlayer did not
1054 * see the completion before the eh fired. Just return
1055 * SUCCESS.
1056 */
1057 iocb = &lpfc_cmd->cur_iocbq;
1058 if (lpfc_cmd->pCmd != cmnd)
1059 goto out;
1060
1061 BUG_ON(iocb->context1 != lpfc_cmd);
1062
1063 abtsiocb = lpfc_sli_get_iocbq(phba);
1064 if (abtsiocb == NULL) {
1065 ret = FAILED;
1066 goto out;
1067 }
1068
1069 /*
1070 * The scsi command can not be in txq and it is in flight because the
1071 * pCmd is still pointig at the SCSI command we have to abort. There
1072 * is no need to search the txcmplq. Just send an abort to the FW.
1073 */
1074
1075 cmd = &iocb->iocb;
1076 icmd = &abtsiocb->iocb;
1077 icmd->un.acxri.abortType = ABORT_TYPE_ABTS;
1078 icmd->un.acxri.abortContextTag = cmd->ulpContext;
1079 icmd->un.acxri.abortIoTag = cmd->ulpIoTag;
1080
1081 icmd->ulpLe = 1;
1082 icmd->ulpClass = cmd->ulpClass;
1083 if (lpfc_is_link_up(phba))
1084 icmd->ulpCommand = CMD_ABORT_XRI_CN;
1085 else
1086 icmd->ulpCommand = CMD_CLOSE_XRI_CN;
1087
1088 abtsiocb->iocb_cmpl = lpfc_sli_abort_fcp_cmpl;
1089 abtsiocb->vport = vport;
1090 if (lpfc_sli_issue_iocb(phba, pring, abtsiocb, 0) == IOCB_ERROR) {
1091 lpfc_sli_release_iocbq(phba, abtsiocb);
1092 ret = FAILED;
1093 goto out;
1094 }
1095
1096 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
1097 lpfc_sli_poll_fcp_ring (phba);
1098
1099 lpfc_cmd->waitq = &waitq;
1100 /* Wait for abort to complete */
1101 wait_event_timeout(waitq,
1102 (lpfc_cmd->pCmd != cmnd),
1103 (2*vport->cfg_devloss_tmo*HZ));
1104
1105 spin_lock_irq(shost->host_lock);
1106 lpfc_cmd->waitq = NULL;
1107 spin_unlock_irq(shost->host_lock);
1108
1109 if (lpfc_cmd->pCmd == cmnd) {
1110 ret = FAILED;
1111 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1112 "0748 abort handler timed out waiting "
1113 "for abort to complete: ret %#x, ID %d, "
1114 "LUN %d, snum %#lx\n",
1115 ret, cmnd->device->id, cmnd->device->lun,
1116 cmnd->serial_number);
1117 }
1118
1119 out:
1120 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
1121 "0749 SCSI Layer I/O Abort Request Status x%x ID %d "
1122 "LUN %d snum %#lx\n", ret, cmnd->device->id,
1123 cmnd->device->lun, cmnd->serial_number);
1124 return ret;
1125 }
1126
1127 static int
1128 lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
1129 {
1130 struct Scsi_Host *shost = cmnd->device->host;
1131 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1132 struct lpfc_hba *phba = vport->phba;
1133 struct lpfc_scsi_buf *lpfc_cmd;
1134 struct lpfc_iocbq *iocbq, *iocbqrsp;
1135 struct lpfc_rport_data *rdata = cmnd->device->hostdata;
1136 struct lpfc_nodelist *pnode = rdata->pnode;
1137 uint32_t cmd_result = 0, cmd_status = 0;
1138 int ret = FAILED;
1139 int iocb_status = IOCB_SUCCESS;
1140 int cnt, loopcnt;
1141
1142 lpfc_block_error_handler(cmnd);
1143 loopcnt = 0;
1144 /*
1145 * If target is not in a MAPPED state, delay the reset until
1146 * target is rediscovered or devloss timeout expires.
1147 */
1148 while (1) {
1149 if (!pnode)
1150 goto out;
1151
1152 if (pnode->nlp_state != NLP_STE_MAPPED_NODE) {
1153 schedule_timeout_uninterruptible(msecs_to_jiffies(500));
1154 loopcnt++;
1155 rdata = cmnd->device->hostdata;
1156 if (!rdata ||
1157 (loopcnt > ((vport->cfg_devloss_tmo * 2) + 1))){
1158 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1159 "0721 LUN Reset rport "
1160 "failure: cnt x%x rdata x%p\n",
1161 loopcnt, rdata);
1162 goto out;
1163 }
1164 pnode = rdata->pnode;
1165 if (!pnode)
1166 goto out;
1167 }
1168 if (pnode->nlp_state == NLP_STE_MAPPED_NODE)
1169 break;
1170 }
1171
1172 lpfc_cmd = lpfc_get_scsi_buf(phba);
1173 if (lpfc_cmd == NULL)
1174 goto out;
1175
1176 lpfc_cmd->timeout = 60;
1177 lpfc_cmd->rdata = rdata;
1178
1179 ret = lpfc_scsi_prep_task_mgmt_cmd(vport, lpfc_cmd, cmnd->device->lun,
1180 FCP_TARGET_RESET);
1181 if (!ret)
1182 goto out_free_scsi_buf;
1183
1184 iocbq = &lpfc_cmd->cur_iocbq;
1185
1186 /* get a buffer for this IOCB command response */
1187 iocbqrsp = lpfc_sli_get_iocbq(phba);
1188 if (iocbqrsp == NULL)
1189 goto out_free_scsi_buf;
1190
1191 lpfc_printf_vlog(vport, KERN_INFO, LOG_FCP,
1192 "0703 Issue target reset to TGT %d LUN %d "
1193 "rpi x%x nlp_flag x%x\n", cmnd->device->id,
1194 cmnd->device->lun, pnode->nlp_rpi, pnode->nlp_flag);
1195 iocb_status = lpfc_sli_issue_iocb_wait(phba,
1196 &phba->sli.ring[phba->sli.fcp_ring],
1197 iocbq, iocbqrsp, lpfc_cmd->timeout);
1198
1199 if (iocb_status == IOCB_TIMEDOUT)
1200 iocbq->iocb_cmpl = lpfc_tskmgmt_def_cmpl;
1201
1202 if (iocb_status == IOCB_SUCCESS)
1203 ret = SUCCESS;
1204 else
1205 ret = iocb_status;
1206
1207 cmd_result = iocbqrsp->iocb.un.ulpWord[4];
1208 cmd_status = iocbqrsp->iocb.ulpStatus;
1209
1210 lpfc_sli_release_iocbq(phba, iocbqrsp);
1211
1212 /*
1213 * All outstanding txcmplq I/Os should have been aborted by the device.
1214 * Unfortunately, some targets do not abide by this forcing the driver
1215 * to double check.
1216 */
1217 cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id, cmnd->device->lun,
1218 LPFC_CTX_LUN);
1219 if (cnt)
1220 lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
1221 cmnd->device->id, cmnd->device->lun,
1222 LPFC_CTX_LUN);
1223 loopcnt = 0;
1224 while(cnt) {
1225 schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
1226
1227 if (++loopcnt
1228 > (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
1229 break;
1230
1231 cnt = lpfc_sli_sum_iocb(vport, cmnd->device->id,
1232 cmnd->device->lun, LPFC_CTX_LUN);
1233 }
1234
1235 if (cnt) {
1236 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1237 "0719 device reset I/O flush failure: "
1238 "cnt x%x\n", cnt);
1239 ret = FAILED;
1240 }
1241
1242 out_free_scsi_buf:
1243 if (iocb_status != IOCB_TIMEDOUT) {
1244 lpfc_release_scsi_buf(phba, lpfc_cmd);
1245 }
1246 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1247 "0713 SCSI layer issued device reset (%d, %d) "
1248 "return x%x status x%x result x%x\n",
1249 cmnd->device->id, cmnd->device->lun, ret,
1250 cmd_status, cmd_result);
1251 out:
1252 return ret;
1253 }
1254
1255 static int
1256 lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
1257 {
1258 struct Scsi_Host *shost = cmnd->device->host;
1259 struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
1260 struct lpfc_hba *phba = vport->phba;
1261 struct lpfc_nodelist *ndlp = NULL;
1262 int match;
1263 int ret = FAILED, i, err_count = 0;
1264 int cnt, loopcnt;
1265 struct lpfc_scsi_buf * lpfc_cmd;
1266
1267 lpfc_block_error_handler(cmnd);
1268
1269 lpfc_cmd = lpfc_get_scsi_buf(phba);
1270 if (lpfc_cmd == NULL)
1271 goto out;
1272
1273 /* The lpfc_cmd storage is reused. Set all loop invariants. */
1274 lpfc_cmd->timeout = 60;
1275
1276 /*
1277 * Since the driver manages a single bus device, reset all
1278 * targets known to the driver. Should any target reset
1279 * fail, this routine returns failure to the midlayer.
1280 */
1281 for (i = 0; i < LPFC_MAX_TARGET; i++) {
1282 /* Search for mapped node by target ID */
1283 match = 0;
1284 spin_lock_irq(shost->host_lock);
1285 list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
1286 if (!NLP_CHK_NODE_ACT(ndlp))
1287 continue;
1288 if (ndlp->nlp_state == NLP_STE_MAPPED_NODE &&
1289 i == ndlp->nlp_sid &&
1290 ndlp->rport) {
1291 match = 1;
1292 break;
1293 }
1294 }
1295 spin_unlock_irq(shost->host_lock);
1296 if (!match)
1297 continue;
1298
1299 ret = lpfc_scsi_tgt_reset(lpfc_cmd, vport, i,
1300 cmnd->device->lun,
1301 ndlp->rport->dd_data);
1302 if (ret != SUCCESS) {
1303 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1304 "0700 Bus Reset on target %d failed\n",
1305 i);
1306 err_count++;
1307 break;
1308 }
1309 }
1310
1311 if (ret != IOCB_TIMEDOUT)
1312 lpfc_release_scsi_buf(phba, lpfc_cmd);
1313
1314 if (err_count == 0)
1315 ret = SUCCESS;
1316 else
1317 ret = FAILED;
1318
1319 /*
1320 * All outstanding txcmplq I/Os should have been aborted by
1321 * the targets. Unfortunately, some targets do not abide by
1322 * this forcing the driver to double check.
1323 */
1324 cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
1325 if (cnt)
1326 lpfc_sli_abort_iocb(vport, &phba->sli.ring[phba->sli.fcp_ring],
1327 0, 0, LPFC_CTX_HOST);
1328 loopcnt = 0;
1329 while(cnt) {
1330 schedule_timeout_uninterruptible(LPFC_RESET_WAIT*HZ);
1331
1332 if (++loopcnt
1333 > (2 * vport->cfg_devloss_tmo)/LPFC_RESET_WAIT)
1334 break;
1335
1336 cnt = lpfc_sli_sum_iocb(vport, 0, 0, LPFC_CTX_HOST);
1337 }
1338
1339 if (cnt) {
1340 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1341 "0715 Bus Reset I/O flush failure: "
1342 "cnt x%x left x%x\n", cnt, i);
1343 ret = FAILED;
1344 }
1345
1346 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1347 "0714 SCSI layer issued Bus Reset Data: x%x\n", ret);
1348 out:
1349 return ret;
1350 }
1351
1352 static int
1353 lpfc_slave_alloc(struct scsi_device *sdev)
1354 {
1355 struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
1356 struct lpfc_hba *phba = vport->phba;
1357 struct lpfc_scsi_buf *scsi_buf = NULL;
1358 struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
1359 uint32_t total = 0, i;
1360 uint32_t num_to_alloc = 0;
1361 unsigned long flags;
1362
1363 if (!rport || fc_remote_port_chkready(rport))
1364 return -ENXIO;
1365
1366 sdev->hostdata = rport->dd_data;
1367
1368 /*
1369 * Populate the cmds_per_lun count scsi_bufs into this host's globally
1370 * available list of scsi buffers. Don't allocate more than the
1371 * HBA limit conveyed to the midlayer via the host structure. The
1372 * formula accounts for the lun_queue_depth + error handlers + 1
1373 * extra. This list of scsi bufs exists for the lifetime of the driver.
1374 */
1375 total = phba->total_scsi_bufs;
1376 num_to_alloc = vport->cfg_lun_queue_depth + 2;
1377
1378 /* Allow some exchanges to be available always to complete discovery */
1379 if (total >= phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
1380 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
1381 "0704 At limitation of %d preallocated "
1382 "command buffers\n", total);
1383 return 0;
1384 /* Allow some exchanges to be available always to complete discovery */
1385 } else if (total + num_to_alloc >
1386 phba->cfg_hba_queue_depth - LPFC_DISC_IOCB_BUFF_COUNT ) {
1387 lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
1388 "0705 Allocation request of %d "
1389 "command buffers will exceed max of %d. "
1390 "Reducing allocation request to %d.\n",
1391 num_to_alloc, phba->cfg_hba_queue_depth,
1392 (phba->cfg_hba_queue_depth - total));
1393 num_to_alloc = phba->cfg_hba_queue_depth - total;
1394 }
1395
1396 for (i = 0; i < num_to_alloc; i++) {
1397 scsi_buf = lpfc_new_scsi_buf(vport);
1398 if (!scsi_buf) {
1399 lpfc_printf_vlog(vport, KERN_ERR, LOG_FCP,
1400 "0706 Failed to allocate "
1401 "command buffer\n");
1402 break;
1403 }
1404
1405 spin_lock_irqsave(&phba->scsi_buf_list_lock, flags);
1406 phba->total_scsi_bufs++;
1407 list_add_tail(&scsi_buf->list, &phba->lpfc_scsi_buf_list);
1408 spin_unlock_irqrestore(&phba->scsi_buf_list_lock, flags);
1409 }
1410 return 0;
1411 }
1412
1413 static int
1414 lpfc_slave_configure(struct scsi_device *sdev)
1415 {
1416 struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
1417 struct lpfc_hba *phba = vport->phba;
1418 struct fc_rport *rport = starget_to_rport(sdev->sdev_target);
1419
1420 if (sdev->tagged_supported)
1421 scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth);
1422 else
1423 scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth);
1424
1425 /*
1426 * Initialize the fc transport attributes for the target
1427 * containing this scsi device. Also note that the driver's
1428 * target pointer is stored in the starget_data for the
1429 * driver's sysfs entry point functions.
1430 */
1431 rport->dev_loss_tmo = vport->cfg_devloss_tmo;
1432
1433 if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
1434 lpfc_sli_poll_fcp_ring(phba);
1435 if (phba->cfg_poll & DISABLE_FCP_RING_INT)
1436 lpfc_poll_rearm_timer(phba);
1437 }
1438
1439 return 0;
1440 }
1441
1442 static void
1443 lpfc_slave_destroy(struct scsi_device *sdev)
1444 {
1445 sdev->hostdata = NULL;
1446 return;
1447 }
1448
1449
1450 struct scsi_host_template lpfc_template = {
1451 .module = THIS_MODULE,
1452 .name = LPFC_DRIVER_NAME,
1453 .info = lpfc_info,
1454 .queuecommand = lpfc_queuecommand,
1455 .eh_abort_handler = lpfc_abort_handler,
1456 .eh_device_reset_handler= lpfc_device_reset_handler,
1457 .eh_bus_reset_handler = lpfc_bus_reset_handler,
1458 .slave_alloc = lpfc_slave_alloc,
1459 .slave_configure = lpfc_slave_configure,
1460 .slave_destroy = lpfc_slave_destroy,
1461 .scan_finished = lpfc_scan_finished,
1462 .this_id = -1,
1463 .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
1464 .cmd_per_lun = LPFC_CMD_PER_LUN,
1465 .use_clustering = ENABLE_CLUSTERING,
1466 .shost_attrs = lpfc_hba_attrs,
1467 .max_sectors = 0xFFFF,
1468 };
1469
1470 struct scsi_host_template lpfc_vport_template = {
1471 .module = THIS_MODULE,
1472 .name = LPFC_DRIVER_NAME,
1473 .info = lpfc_info,
1474 .queuecommand = lpfc_queuecommand,
1475 .eh_abort_handler = lpfc_abort_handler,
1476 .eh_device_reset_handler= lpfc_device_reset_handler,
1477 .eh_bus_reset_handler = lpfc_bus_reset_handler,
1478 .slave_alloc = lpfc_slave_alloc,
1479 .slave_configure = lpfc_slave_configure,
1480 .slave_destroy = lpfc_slave_destroy,
1481 .scan_finished = lpfc_scan_finished,
1482 .this_id = -1,
1483 .sg_tablesize = LPFC_DEFAULT_SG_SEG_CNT,
1484 .cmd_per_lun = LPFC_CMD_PER_LUN,
1485 .use_clustering = ENABLE_CLUSTERING,
1486 .shost_attrs = lpfc_vport_attrs,
1487 .max_sectors = 0xFFFF,
1488 };
mah project overlay