?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / drivers / net / cxgb3 / mc5.c
blob4c4d6e877ea698baf6ed92bbfc606f1b389dc476
1 /*
2 * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
3 *
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
9 *
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
12 * conditions are met:
13 *
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
16 * disclaimer.
17 *
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
22 *
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30 * SOFTWARE.
31 */
32 #include "common.h"
33 #include "regs.h"
34
35 enum {
36 IDT75P52100 = 4,
37 IDT75N43102 = 5
38 };
39
40 /* DBGI command mode */
41 enum {
42 DBGI_MODE_MBUS = 0,
43 DBGI_MODE_IDT52100 = 5
44 };
45
46 /* IDT 75P52100 commands */
47 #define IDT_CMD_READ 0
48 #define IDT_CMD_WRITE 1
49 #define IDT_CMD_SEARCH 2
50 #define IDT_CMD_LEARN 3
51
52 /* IDT LAR register address and value for 144-bit mode (low 32 bits) */
53 #define IDT_LAR_ADR0 0x180006
54 #define IDT_LAR_MODE144 0xffff0000
55
56 /* IDT SCR and SSR addresses (low 32 bits) */
57 #define IDT_SCR_ADR0 0x180000
58 #define IDT_SSR0_ADR0 0x180002
59 #define IDT_SSR1_ADR0 0x180004
60
61 /* IDT GMR base address (low 32 bits) */
62 #define IDT_GMR_BASE_ADR0 0x180020
63
64 /* IDT data and mask array base addresses (low 32 bits) */
65 #define IDT_DATARY_BASE_ADR0 0
66 #define IDT_MSKARY_BASE_ADR0 0x80000
67
68 /* IDT 75N43102 commands */
69 #define IDT4_CMD_SEARCH144 3
70 #define IDT4_CMD_WRITE 4
71 #define IDT4_CMD_READ 5
72
73 /* IDT 75N43102 SCR address (low 32 bits) */
74 #define IDT4_SCR_ADR0 0x3
75
76 /* IDT 75N43102 GMR base addresses (low 32 bits) */
77 #define IDT4_GMR_BASE0 0x10
78 #define IDT4_GMR_BASE1 0x20
79 #define IDT4_GMR_BASE2 0x30
80
81 /* IDT 75N43102 data and mask array base addresses (low 32 bits) */
82 #define IDT4_DATARY_BASE_ADR0 0x1000000
83 #define IDT4_MSKARY_BASE_ADR0 0x2000000
84
85 #define MAX_WRITE_ATTEMPTS 5
86
87 #define MAX_ROUTES 2048
88
89 /*
90 * Issue a command to the TCAM and wait for its completion. The address and
91 * any data required by the command must have been setup by the caller.
92 */
93 static int mc5_cmd_write(struct adapter *adapter, u32 cmd)
94 {
95 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd);
96 return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS,
97 F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1);
98 }
99
100 static inline void dbgi_wr_addr3(struct adapter *adapter, u32 v1, u32 v2,
101 u32 v3)
102 {
103 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1);
104 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2);
105 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3);
106 }
107
108 static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2,
109 u32 v3)
110 {
111 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1);
112 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2);
113 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3);
114 }
115
116 static inline void dbgi_rd_rsp3(struct adapter *adapter, u32 *v1, u32 *v2,
117 u32 *v3)
118 {
119 *v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0);
120 *v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1);
121 *v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2);
122 }
123
124 /*
125 * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM
126 * command cmd. The data to be written must have been set up by the caller.
127 * Returns -1 on failure, 0 on success.
128 */
129 static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd)
130 {
131 t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo);
132 if (mc5_cmd_write(adapter, cmd) == 0)
133 return 0;
134 CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n",
135 addr_lo);
136 return -1;
137 }
138
139 static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base,
140 u32 data_array_base, u32 write_cmd,
141 int addr_shift)
142 {
143 unsigned int i;
144 struct adapter *adap = mc5->adapter;
145
146 /*
147 * We need the size of the TCAM data and mask arrays in terms of
148 * 72-bit entries.
149 */
150 unsigned int size72 = mc5->tcam_size;
151 unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX);
152
153 if (mc5->mode == MC5_MODE_144_BIT) {
154 size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */
155 server_base *= 2;
156 }
157
158 /* Clear the data array */
159 dbgi_wr_data3(adap, 0, 0, 0);
160 for (i = 0; i < size72; i++)
161 if (mc5_write(adap, data_array_base + (i << addr_shift),
162 write_cmd))
163 return -1;
164
165 /* Initialize the mask array. */
166 dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
167 for (i = 0; i < size72; i++) {
168 if (i == server_base) /* entering server or routing region */
169 t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0,
170 mc5->mode == MC5_MODE_144_BIT ?
171 0xfffffff9 : 0xfffffffd);
172 if (mc5_write(adap, mask_array_base + (i << addr_shift),
173 write_cmd))
174 return -1;
175 }
176 return 0;
177 }
178
179 static int init_idt52100(struct mc5 *mc5)
180 {
181 int i;
182 struct adapter *adap = mc5->adapter;
183
184 t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
185 V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15));
186 t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2);
187
188 /*
189 * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and
190 * GMRs 8-9 for ACK- and AOPEN searches.
191 */
192 t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE);
193 t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE);
194 t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH);
195 t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN);
196 t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000);
197 t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN);
198 t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH);
199 t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN);
200 t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH);
201 t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000);
202 t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE);
203 t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ);
204
205 /* Set DBGI command mode for IDT TCAM. */
206 t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
207
208 /* Set up LAR */
209 dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0);
210 if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE))
211 goto err;
212
213 /* Set up SSRs */
214 dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0);
215 if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) ||
216 mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE))
217 goto err;
218
219 /* Set up GMRs */
220 for (i = 0; i < 32; ++i) {
221 if (i >= 12 && i < 15)
222 dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
223 else if (i == 15)
224 dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
225 else
226 dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
227
228 if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE))
229 goto err;
230 }
231
232 /* Set up SCR */
233 dbgi_wr_data3(adap, 1, 0, 0);
234 if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE))
235 goto err;
236
237 return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0,
238 IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0);
239 err:
240 return -EIO;
241 }
242
243 static int init_idt43102(struct mc5 *mc5)
244 {
245 int i;
246 struct adapter *adap = mc5->adapter;
247
248 t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
249 adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) :
250 V_RDLAT(0xd) | V_SRCHLAT(0x12));
251
252 /*
253 * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask
254 * for ACK- and AOPEN searches.
255 */
256 t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE);
257 t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE);
258 t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD,
259 IDT4_CMD_SEARCH144 | 0x3800);
260 t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144);
261 t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800);
262 t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800);
263 t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800);
264 t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE);
265 t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ);
266
267 t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3);
268
269 /* Set DBGI command mode for IDT TCAM. */
270 t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
271
272 /* Set up GMRs */
273 dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
274 for (i = 0; i < 7; ++i)
275 if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE))
276 goto err;
277
278 for (i = 0; i < 4; ++i)
279 if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE))
280 goto err;
281
282 dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
283 if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) ||
284 mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) ||
285 mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE))
286 goto err;
287
288 dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
289 if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE))
290 goto err;
291
292 /* Set up SCR */
293 dbgi_wr_data3(adap, 0xf0000000, 0, 0);
294 if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE))
295 goto err;
296
297 return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0,
298 IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1);
299 err:
300 return -EIO;
301 }
302
303 /* Put MC5 in DBGI mode. */
304 static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5)
305 {
306 t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
307 V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN);
308 }
309
310 /* Put MC5 in M-Bus mode. */
311 static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
312 {
313 t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
314 V_TMMODE(mc5->mode == MC5_MODE_72_BIT) |
315 V_COMPEN(mc5->mode == MC5_MODE_72_BIT) |
316 V_PRTYEN(mc5->parity_enabled) | F_MBUSEN);
317 }
318
319 /*
320 * Initialization that requires the OS and protocol layers to already
321 * be intialized goes here.
322 */
323 int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
324 unsigned int nroutes)
325 {
326 u32 cfg;
327 int err;
328 unsigned int tcam_size = mc5->tcam_size;
329 struct adapter *adap = mc5->adapter;
330
331 if (!tcam_size)
332 return 0;
333
334 if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size)
335 return -EINVAL;
336
337 /* Reset the TCAM */
338 cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE;
339 cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST;
340 t3_write_reg(adap, A_MC5_DB_CONFIG, cfg);
341 if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) {
342 CH_ERR(adap, "TCAM reset timed out\n");
343 return -1;
344 }
345
346 t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes);
347 t3_write_reg(adap, A_MC5_DB_FILTER_TABLE,
348 tcam_size - nroutes - nfilters);
349 t3_write_reg(adap, A_MC5_DB_SERVER_INDEX,
350 tcam_size - nroutes - nfilters - nservers);
351
352 mc5->parity_enabled = 1;
353
354 /* All the TCAM addresses we access have only the low 32 bits non 0 */
355 t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0);
356 t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0);
357
358 mc5_dbgi_mode_enable(mc5);
359
360 switch (mc5->part_type) {
361 case IDT75P52100:
362 err = init_idt52100(mc5);
363 break;
364 case IDT75N43102:
365 err = init_idt43102(mc5);
366 break;
367 default:
368 CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type);
369 err = -EINVAL;
370 break;
371 }
372
373 mc5_dbgi_mode_disable(mc5);
374 return err;
375 }
376
377 /*
378 * read_mc5_range - dump a part of the memory managed by MC5
379 * @mc5: the MC5 handle
380 * @start: the start address for the dump
381 * @n: number of 72-bit words to read
382 * @buf: result buffer
383 *
384 * Read n 72-bit words from MC5 memory from the given start location.
385 */
386 int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start,
387 unsigned int n, u32 *buf)
388 {
389 u32 read_cmd;
390 int err = 0;
391 struct adapter *adap = mc5->adapter;
392
393 if (mc5->part_type == IDT75P52100)
394 read_cmd = IDT_CMD_READ;
395 else if (mc5->part_type == IDT75N43102)
396 read_cmd = IDT4_CMD_READ;
397 else
398 return -EINVAL;
399
400 mc5_dbgi_mode_enable(mc5);
401
402 while (n--) {
403 t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++);
404 if (mc5_cmd_write(adap, read_cmd)) {
405 err = -EIO;
406 break;
407 }
408 dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf);
409 buf += 3;
410 }
411
412 mc5_dbgi_mode_disable(mc5);
413 return 0;
414 }
415
416 #define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR)
417
418 /*
419 * MC5 interrupt handler
420 */
421 void t3_mc5_intr_handler(struct mc5 *mc5)
422 {
423 struct adapter *adap = mc5->adapter;
424 u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE);
425
426 if ((cause & F_PARITYERR) && mc5->parity_enabled) {
427 CH_ALERT(adap, "MC5 parity error\n");
428 mc5->stats.parity_err++;
429 }
430
431 if (cause & F_REQQPARERR) {
432 CH_ALERT(adap, "MC5 request queue parity error\n");
433 mc5->stats.reqq_parity_err++;
434 }
435
436 if (cause & F_DISPQPARERR) {
437 CH_ALERT(adap, "MC5 dispatch queue parity error\n");
438 mc5->stats.dispq_parity_err++;
439 }
440
441 if (cause & F_ACTRGNFULL)
442 mc5->stats.active_rgn_full++;
443 if (cause & F_NFASRCHFAIL)
444 mc5->stats.nfa_srch_err++;
445 if (cause & F_UNKNOWNCMD)
446 mc5->stats.unknown_cmd++;
447 if (cause & F_DELACTEMPTY)
448 mc5->stats.del_act_empty++;
449 if (cause & MC5_INT_FATAL)
450 t3_fatal_err(adap);
451
452 t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause);
453 }
454
455 void t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode)
456 {
457 #define K * 1024
458
459 static unsigned int tcam_part_size[] = { /* in K 72-bit entries */
460 64 K, 128 K, 256 K, 32 K
461 };
462
463 #undef K
464
465 u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG);
466
467 mc5->adapter = adapter;
468 mc5->mode = (unsigned char)mode;
469 mc5->part_type = (unsigned char)G_TMTYPE(cfg);
470 if (cfg & F_TMTYPEHI)
471 mc5->part_type |= 4;
472
473 mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)];
474 if (mode == MC5_MODE_144_BIT)
475 mc5->tcam_size /= 2;
476 }
mah project overlay