Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / drivers / block / paride / pf.c
blobe7fe6ca97dd8a4027142a763bcc8cdc4018e52f4
1 /*
2 pf.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
3 Under the terms of the GNU General Public License.
5 This is the high-level driver for parallel port ATAPI disk
6 drives based on chips supported by the paride module.
8 By default, the driver will autoprobe for a single parallel
9 port ATAPI disk drive, but if their individual parameters are
10 specified, the driver can handle up to 4 drives.
12 The behaviour of the pf driver can be altered by setting
13 some parameters from the insmod command line. The following
14 parameters are adjustable:
16 drive0 These four arguments can be arrays of
17 drive1 1-7 integers as follows:
18 drive2
19 drive3 <prt>,<pro>,<uni>,<mod>,<slv>,<lun>,<dly>
21 Where,
23 <prt> is the base of the parallel port address for
24 the corresponding drive. (required)
26 <pro> is the protocol number for the adapter that
27 supports this drive. These numbers are
28 logged by 'paride' when the protocol modules
29 are initialised. (0 if not given)
31 <uni> for those adapters that support chained
32 devices, this is the unit selector for the
33 chain of devices on the given port. It should
34 be zero for devices that don't support chaining.
35 (0 if not given)
37 <mod> this can be -1 to choose the best mode, or one
38 of the mode numbers supported by the adapter.
39 (-1 if not given)
41 <slv> ATAPI CDroms can be jumpered to master or slave.
42 Set this to 0 to choose the master drive, 1 to
43 choose the slave, -1 (the default) to choose the
44 first drive found.
46 <lun> Some ATAPI devices support multiple LUNs.
47 One example is the ATAPI PD/CD drive from
48 Matshita/Panasonic. This device has a
49 CD drive on LUN 0 and a PD drive on LUN 1.
50 By default, the driver will search for the
51 first LUN with a supported device. Set
52 this parameter to force it to use a specific
53 LUN. (default -1)
55 <dly> some parallel ports require the driver to
56 go more slowly. -1 sets a default value that
57 should work with the chosen protocol. Otherwise,
58 set this to a small integer, the larger it is
59 the slower the port i/o. In some cases, setting
60 this to zero will speed up the device. (default -1)
62 major You may use this parameter to overide the
63 default major number (47) that this driver
64 will use. Be sure to change the device
65 name as well.
67 name This parameter is a character string that
68 contains the name the kernel will use for this
69 device (in /proc output, for instance).
70 (default "pf").
72 cluster The driver will attempt to aggregate requests
73 for adjacent blocks into larger multi-block
74 clusters. The maximum cluster size (in 512
75 byte sectors) is set with this parameter.
76 (default 64)
78 verbose This parameter controls the amount of logging
79 that the driver will do. Set it to 0 for
80 normal operation, 1 to see autoprobe progress
81 messages, or 2 to see additional debugging
82 output. (default 0)
84 nice This parameter controls the driver's use of
85 idle CPU time, at the expense of some speed.
87 If this driver is built into the kernel, you can use the
88 following command line parameters, with the same values
89 as the corresponding module parameters listed above:
91 pf.drive0
92 pf.drive1
93 pf.drive2
94 pf.drive3
95 pf.cluster
96 pf.nice
98 In addition, you can use the parameter pf.disable to disable
99 the driver entirely.
103 /* Changes:
105 1.01 GRG 1998.05.03 Changes for SMP. Eliminate sti().
106 Fix for drives that don't clear STAT_ERR
107 until after next CDB delivered.
108 Small change in pf_completion to round
109 up transfer size.
110 1.02 GRG 1998.06.16 Eliminated an Ugh
111 1.03 GRG 1998.08.16 Use HZ in loop timings, extra debugging
112 1.04 GRG 1998.09.24 Added jumbo support
116 #define PF_VERSION "1.04"
117 #define PF_MAJOR 47
118 #define PF_NAME "pf"
119 #define PF_UNITS 4
121 /* Here are things one can override from the insmod command.
122 Most are autoprobed by paride unless set here. Verbose is off
123 by default.
127 static int verbose = 0;
128 static int major = PF_MAJOR;
129 static char *name = PF_NAME;
130 static int cluster = 64;
131 static int nice = 0;
132 static int disable = 0;
134 static int drive0[7] = { 0, 0, 0, -1, -1, -1, -1 };
135 static int drive1[7] = { 0, 0, 0, -1, -1, -1, -1 };
136 static int drive2[7] = { 0, 0, 0, -1, -1, -1, -1 };
137 static int drive3[7] = { 0, 0, 0, -1, -1, -1, -1 };
139 static int (*drives[4])[7] = {&drive0, &drive1, &drive2, &drive3};
140 static int pf_drive_count;
142 enum {D_PRT, D_PRO, D_UNI, D_MOD, D_SLV, D_LUN, D_DLY};
144 /* end of parameters */
146 #include <linux/module.h>
147 #include <linux/init.h>
148 #include <linux/fs.h>
149 #include <linux/delay.h>
150 #include <linux/hdreg.h>
151 #include <linux/cdrom.h>
152 #include <linux/spinlock.h>
153 #include <linux/blkdev.h>
154 #include <linux/blkpg.h>
155 #include <asm/uaccess.h>
157 static DEFINE_SPINLOCK(pf_spin_lock);
159 module_param(verbose, bool, 0644);
160 module_param(major, int, 0);
161 module_param(name, charp, 0);
162 module_param(cluster, int, 0);
163 module_param(nice, int, 0);
164 module_param_array(drive0, int, NULL, 0);
165 module_param_array(drive1, int, NULL, 0);
166 module_param_array(drive2, int, NULL, 0);
167 module_param_array(drive3, int, NULL, 0);
169 #include "paride.h"
170 #include "pseudo.h"
172 /* constants for faking geometry numbers */
174 #define PF_FD_MAX 8192 /* use FD geometry under this size */
175 #define PF_FD_HDS 2
176 #define PF_FD_SPT 18
177 #define PF_HD_HDS 64
178 #define PF_HD_SPT 32
180 #define PF_MAX_RETRIES 5
181 #define PF_TMO 800 /* interrupt timeout in jiffies */
182 #define PF_SPIN_DEL 50 /* spin delay in micro-seconds */
184 #define PF_SPIN (1000000*PF_TMO)/(HZ*PF_SPIN_DEL)
186 #define STAT_ERR 0x00001
187 #define STAT_INDEX 0x00002
188 #define STAT_ECC 0x00004
189 #define STAT_DRQ 0x00008
190 #define STAT_SEEK 0x00010
191 #define STAT_WRERR 0x00020
192 #define STAT_READY 0x00040
193 #define STAT_BUSY 0x00080
195 #define ATAPI_REQ_SENSE 0x03
196 #define ATAPI_LOCK 0x1e
197 #define ATAPI_DOOR 0x1b
198 #define ATAPI_MODE_SENSE 0x5a
199 #define ATAPI_CAPACITY 0x25
200 #define ATAPI_IDENTIFY 0x12
201 #define ATAPI_READ_10 0x28
202 #define ATAPI_WRITE_10 0x2a
204 static int pf_open(struct inode *inode, struct file *file);
205 static void do_pf_request(struct request_queue * q);
206 static int pf_ioctl(struct inode *inode, struct file *file,
207 unsigned int cmd, unsigned long arg);
208 static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo);
210 static int pf_release(struct inode *inode, struct file *file);
212 static int pf_detect(void);
213 static void do_pf_read(void);
214 static void do_pf_read_start(void);
215 static void do_pf_write(void);
216 static void do_pf_write_start(void);
217 static void do_pf_read_drq(void);
218 static void do_pf_write_done(void);
220 #define PF_NM 0
221 #define PF_RO 1
222 #define PF_RW 2
224 #define PF_NAMELEN 8
226 struct pf_unit {
227 struct pi_adapter pia; /* interface to paride layer */
228 struct pi_adapter *pi;
229 int removable; /* removable media device ? */
230 int media_status; /* media present ? WP ? */
231 int drive; /* drive */
232 int lun;
233 int access; /* count of active opens ... */
234 int present; /* device present ? */
235 char name[PF_NAMELEN]; /* pf0, pf1, ... */
236 struct gendisk *disk;
239 static struct pf_unit units[PF_UNITS];
241 static int pf_identify(struct pf_unit *pf);
242 static void pf_lock(struct pf_unit *pf, int func);
243 static void pf_eject(struct pf_unit *pf);
244 static int pf_check_media(struct gendisk *disk);
246 static char pf_scratch[512]; /* scratch block buffer */
248 /* the variables below are used mainly in the I/O request engine, which
249 processes only one request at a time.
252 static int pf_retries = 0; /* i/o error retry count */
253 static int pf_busy = 0; /* request being processed ? */
254 static struct request *pf_req; /* current request */
255 static int pf_block; /* address of next requested block */
256 static int pf_count; /* number of blocks still to do */
257 static int pf_run; /* sectors in current cluster */
258 static int pf_cmd; /* current command READ/WRITE */
259 static struct pf_unit *pf_current;/* unit of current request */
260 static int pf_mask; /* stopper for pseudo-int */
261 static char *pf_buf; /* buffer for request in progress */
263 /* kernel glue structures */
265 static struct block_device_operations pf_fops = {
266 .owner = THIS_MODULE,
267 .open = pf_open,
268 .release = pf_release,
269 .ioctl = pf_ioctl,
270 .getgeo = pf_getgeo,
271 .media_changed = pf_check_media,
274 static void __init pf_init_units(void)
276 struct pf_unit *pf;
277 int unit;
279 pf_drive_count = 0;
280 for (unit = 0, pf = units; unit < PF_UNITS; unit++, pf++) {
281 struct gendisk *disk = alloc_disk(1);
282 if (!disk)
283 continue;
284 pf->disk = disk;
285 pf->pi = &pf->pia;
286 pf->media_status = PF_NM;
287 pf->drive = (*drives[unit])[D_SLV];
288 pf->lun = (*drives[unit])[D_LUN];
289 snprintf(pf->name, PF_NAMELEN, "%s%d", name, unit);
290 disk->major = major;
291 disk->first_minor = unit;
292 strcpy(disk->disk_name, pf->name);
293 disk->fops = &pf_fops;
294 if (!(*drives[unit])[D_PRT])
295 pf_drive_count++;
299 static int pf_open(struct inode *inode, struct file *file)
301 struct pf_unit *pf = inode->i_bdev->bd_disk->private_data;
303 pf_identify(pf);
305 if (pf->media_status == PF_NM)
306 return -ENODEV;
308 if ((pf->media_status == PF_RO) && (file->f_mode & 2))
309 return -EROFS;
311 pf->access++;
312 if (pf->removable)
313 pf_lock(pf, 1);
315 return 0;
318 static int pf_getgeo(struct block_device *bdev, struct hd_geometry *geo)
320 struct pf_unit *pf = bdev->bd_disk->private_data;
321 sector_t capacity = get_capacity(pf->disk);
323 if (capacity < PF_FD_MAX) {
324 geo->cylinders = sector_div(capacity, PF_FD_HDS * PF_FD_SPT);
325 geo->heads = PF_FD_HDS;
326 geo->sectors = PF_FD_SPT;
327 } else {
328 geo->cylinders = sector_div(capacity, PF_HD_HDS * PF_HD_SPT);
329 geo->heads = PF_HD_HDS;
330 geo->sectors = PF_HD_SPT;
333 return 0;
336 static int pf_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
338 struct pf_unit *pf = inode->i_bdev->bd_disk->private_data;
340 if (cmd != CDROMEJECT)
341 return -EINVAL;
343 if (pf->access != 1)
344 return -EBUSY;
345 pf_eject(pf);
346 return 0;
349 static int pf_release(struct inode *inode, struct file *file)
351 struct pf_unit *pf = inode->i_bdev->bd_disk->private_data;
353 if (pf->access <= 0)
354 return -EINVAL;
356 pf->access--;
358 if (!pf->access && pf->removable)
359 pf_lock(pf, 0);
361 return 0;
365 static int pf_check_media(struct gendisk *disk)
367 return 1;
370 static inline int status_reg(struct pf_unit *pf)
372 return pi_read_regr(pf->pi, 1, 6);
375 static inline int read_reg(struct pf_unit *pf, int reg)
377 return pi_read_regr(pf->pi, 0, reg);
380 static inline void write_reg(struct pf_unit *pf, int reg, int val)
382 pi_write_regr(pf->pi, 0, reg, val);
385 static int pf_wait(struct pf_unit *pf, int go, int stop, char *fun, char *msg)
387 int j, r, e, s, p;
389 j = 0;
390 while ((((r = status_reg(pf)) & go) || (stop && (!(r & stop))))
391 && (j++ < PF_SPIN))
392 udelay(PF_SPIN_DEL);
394 if ((r & (STAT_ERR & stop)) || (j >= PF_SPIN)) {
395 s = read_reg(pf, 7);
396 e = read_reg(pf, 1);
397 p = read_reg(pf, 2);
398 if (j >= PF_SPIN)
399 e |= 0x100;
400 if (fun)
401 printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
402 " loop=%d phase=%d\n",
403 pf->name, fun, msg, r, s, e, j, p);
404 return (e << 8) + s;
406 return 0;
409 static int pf_command(struct pf_unit *pf, char *cmd, int dlen, char *fun)
411 pi_connect(pf->pi);
413 write_reg(pf, 6, 0xa0+0x10*pf->drive);
415 if (pf_wait(pf, STAT_BUSY | STAT_DRQ, 0, fun, "before command")) {
416 pi_disconnect(pf->pi);
417 return -1;
420 write_reg(pf, 4, dlen % 256);
421 write_reg(pf, 5, dlen / 256);
422 write_reg(pf, 7, 0xa0); /* ATAPI packet command */
424 if (pf_wait(pf, STAT_BUSY, STAT_DRQ, fun, "command DRQ")) {
425 pi_disconnect(pf->pi);
426 return -1;
429 if (read_reg(pf, 2) != 1) {
430 printk("%s: %s: command phase error\n", pf->name, fun);
431 pi_disconnect(pf->pi);
432 return -1;
435 pi_write_block(pf->pi, cmd, 12);
437 return 0;
440 static int pf_completion(struct pf_unit *pf, char *buf, char *fun)
442 int r, s, n;
444 r = pf_wait(pf, STAT_BUSY, STAT_DRQ | STAT_READY | STAT_ERR,
445 fun, "completion");
447 if ((read_reg(pf, 2) & 2) && (read_reg(pf, 7) & STAT_DRQ)) {
448 n = (((read_reg(pf, 4) + 256 * read_reg(pf, 5)) +
449 3) & 0xfffc);
450 pi_read_block(pf->pi, buf, n);
453 s = pf_wait(pf, STAT_BUSY, STAT_READY | STAT_ERR, fun, "data done");
455 pi_disconnect(pf->pi);
457 return (r ? r : s);
460 static void pf_req_sense(struct pf_unit *pf, int quiet)
462 char rs_cmd[12] =
463 { ATAPI_REQ_SENSE, pf->lun << 5, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0 };
464 char buf[16];
465 int r;
467 r = pf_command(pf, rs_cmd, 16, "Request sense");
468 mdelay(1);
469 if (!r)
470 pf_completion(pf, buf, "Request sense");
472 if ((!r) && (!quiet))
473 printk("%s: Sense key: %x, ASC: %x, ASQ: %x\n",
474 pf->name, buf[2] & 0xf, buf[12], buf[13]);
477 static int pf_atapi(struct pf_unit *pf, char *cmd, int dlen, char *buf, char *fun)
479 int r;
481 r = pf_command(pf, cmd, dlen, fun);
482 mdelay(1);
483 if (!r)
484 r = pf_completion(pf, buf, fun);
485 if (r)
486 pf_req_sense(pf, !fun);
488 return r;
491 static void pf_lock(struct pf_unit *pf, int func)
493 char lo_cmd[12] = { ATAPI_LOCK, pf->lun << 5, 0, 0, func, 0, 0, 0, 0, 0, 0, 0 };
495 pf_atapi(pf, lo_cmd, 0, pf_scratch, func ? "lock" : "unlock");
498 static void pf_eject(struct pf_unit *pf)
500 char ej_cmd[12] = { ATAPI_DOOR, pf->lun << 5, 0, 0, 2, 0, 0, 0, 0, 0, 0, 0 };
502 pf_lock(pf, 0);
503 pf_atapi(pf, ej_cmd, 0, pf_scratch, "eject");
506 #define PF_RESET_TMO 30 /* in tenths of a second */
508 static void pf_sleep(int cs)
510 schedule_timeout_interruptible(cs);
513 /* the ATAPI standard actually specifies the contents of all 7 registers
514 after a reset, but the specification is ambiguous concerning the last
515 two bytes, and different drives interpret the standard differently.
518 static int pf_reset(struct pf_unit *pf)
520 int i, k, flg;
521 int expect[5] = { 1, 1, 1, 0x14, 0xeb };
523 pi_connect(pf->pi);
524 write_reg(pf, 6, 0xa0+0x10*pf->drive);
525 write_reg(pf, 7, 8);
527 pf_sleep(20 * HZ / 1000);
529 k = 0;
530 while ((k++ < PF_RESET_TMO) && (status_reg(pf) & STAT_BUSY))
531 pf_sleep(HZ / 10);
533 flg = 1;
534 for (i = 0; i < 5; i++)
535 flg &= (read_reg(pf, i + 1) == expect[i]);
537 if (verbose) {
538 printk("%s: Reset (%d) signature = ", pf->name, k);
539 for (i = 0; i < 5; i++)
540 printk("%3x", read_reg(pf, i + 1));
541 if (!flg)
542 printk(" (incorrect)");
543 printk("\n");
546 pi_disconnect(pf->pi);
547 return flg - 1;
550 static void pf_mode_sense(struct pf_unit *pf)
552 char ms_cmd[12] =
553 { ATAPI_MODE_SENSE, pf->lun << 5, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0 };
554 char buf[8];
556 pf_atapi(pf, ms_cmd, 8, buf, "mode sense");
557 pf->media_status = PF_RW;
558 if (buf[3] & 0x80)
559 pf->media_status = PF_RO;
562 static void xs(char *buf, char *targ, int offs, int len)
564 int j, k, l;
566 j = 0;
567 l = 0;
568 for (k = 0; k < len; k++)
569 if ((buf[k + offs] != 0x20) || (buf[k + offs] != l))
570 l = targ[j++] = buf[k + offs];
571 if (l == 0x20)
572 j--;
573 targ[j] = 0;
576 static int xl(char *buf, int offs)
578 int v, k;
580 v = 0;
581 for (k = 0; k < 4; k++)
582 v = v * 256 + (buf[k + offs] & 0xff);
583 return v;
586 static void pf_get_capacity(struct pf_unit *pf)
588 char rc_cmd[12] = { ATAPI_CAPACITY, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
589 char buf[8];
590 int bs;
592 if (pf_atapi(pf, rc_cmd, 8, buf, "get capacity")) {
593 pf->media_status = PF_NM;
594 return;
596 set_capacity(pf->disk, xl(buf, 0) + 1);
597 bs = xl(buf, 4);
598 if (bs != 512) {
599 set_capacity(pf->disk, 0);
600 if (verbose)
601 printk("%s: Drive %d, LUN %d,"
602 " unsupported block size %d\n",
603 pf->name, pf->drive, pf->lun, bs);
607 static int pf_identify(struct pf_unit *pf)
609 int dt, s;
610 char *ms[2] = { "master", "slave" };
611 char mf[10], id[18];
612 char id_cmd[12] =
613 { ATAPI_IDENTIFY, pf->lun << 5, 0, 0, 36, 0, 0, 0, 0, 0, 0, 0 };
614 char buf[36];
616 s = pf_atapi(pf, id_cmd, 36, buf, "identify");
617 if (s)
618 return -1;
620 dt = buf[0] & 0x1f;
621 if ((dt != 0) && (dt != 7)) {
622 if (verbose)
623 printk("%s: Drive %d, LUN %d, unsupported type %d\n",
624 pf->name, pf->drive, pf->lun, dt);
625 return -1;
628 xs(buf, mf, 8, 8);
629 xs(buf, id, 16, 16);
631 pf->removable = (buf[1] & 0x80);
633 pf_mode_sense(pf);
634 pf_mode_sense(pf);
635 pf_mode_sense(pf);
637 pf_get_capacity(pf);
639 printk("%s: %s %s, %s LUN %d, type %d",
640 pf->name, mf, id, ms[pf->drive], pf->lun, dt);
641 if (pf->removable)
642 printk(", removable");
643 if (pf->media_status == PF_NM)
644 printk(", no media\n");
645 else {
646 if (pf->media_status == PF_RO)
647 printk(", RO");
648 printk(", %llu blocks\n",
649 (unsigned long long)get_capacity(pf->disk));
651 return 0;
654 /* returns 0, with id set if drive is detected
655 -1, if drive detection failed
657 static int pf_probe(struct pf_unit *pf)
659 if (pf->drive == -1) {
660 for (pf->drive = 0; pf->drive <= 1; pf->drive++)
661 if (!pf_reset(pf)) {
662 if (pf->lun != -1)
663 return pf_identify(pf);
664 else
665 for (pf->lun = 0; pf->lun < 8; pf->lun++)
666 if (!pf_identify(pf))
667 return 0;
669 } else {
670 if (pf_reset(pf))
671 return -1;
672 if (pf->lun != -1)
673 return pf_identify(pf);
674 for (pf->lun = 0; pf->lun < 8; pf->lun++)
675 if (!pf_identify(pf))
676 return 0;
678 return -1;
681 static int pf_detect(void)
683 struct pf_unit *pf = units;
684 int k, unit;
686 printk("%s: %s version %s, major %d, cluster %d, nice %d\n",
687 name, name, PF_VERSION, major, cluster, nice);
689 k = 0;
690 if (pf_drive_count == 0) {
691 if (pi_init(pf->pi, 1, -1, -1, -1, -1, -1, pf_scratch, PI_PF,
692 verbose, pf->name)) {
693 if (!pf_probe(pf) && pf->disk) {
694 pf->present = 1;
695 k++;
696 } else
697 pi_release(pf->pi);
700 } else
701 for (unit = 0; unit < PF_UNITS; unit++, pf++) {
702 int *conf = *drives[unit];
703 if (!conf[D_PRT])
704 continue;
705 if (pi_init(pf->pi, 0, conf[D_PRT], conf[D_MOD],
706 conf[D_UNI], conf[D_PRO], conf[D_DLY],
707 pf_scratch, PI_PF, verbose, pf->name)) {
708 if (pf->disk && !pf_probe(pf)) {
709 pf->present = 1;
710 k++;
711 } else
712 pi_release(pf->pi);
715 if (k)
716 return 0;
718 printk("%s: No ATAPI disk detected\n", name);
719 for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
720 put_disk(pf->disk);
721 return -1;
724 /* The i/o request engine */
726 static int pf_start(struct pf_unit *pf, int cmd, int b, int c)
728 int i;
729 char io_cmd[12] = { cmd, pf->lun << 5, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
731 for (i = 0; i < 4; i++) {
732 io_cmd[5 - i] = b & 0xff;
733 b = b >> 8;
736 io_cmd[8] = c & 0xff;
737 io_cmd[7] = (c >> 8) & 0xff;
739 i = pf_command(pf, io_cmd, c * 512, "start i/o");
741 mdelay(1);
743 return i;
746 static int pf_ready(void)
748 return (((status_reg(pf_current) & (STAT_BUSY | pf_mask)) == pf_mask));
751 static struct request_queue *pf_queue;
753 static void pf_end_request(int uptodate)
755 if (pf_req) {
756 end_request(pf_req, uptodate);
757 pf_req = NULL;
761 static void do_pf_request(struct request_queue * q)
763 if (pf_busy)
764 return;
765 repeat:
766 pf_req = elv_next_request(q);
767 if (!pf_req)
768 return;
770 pf_current = pf_req->rq_disk->private_data;
771 pf_block = pf_req->sector;
772 pf_run = pf_req->nr_sectors;
773 pf_count = pf_req->current_nr_sectors;
775 if (pf_block + pf_count > get_capacity(pf_req->rq_disk)) {
776 pf_end_request(0);
777 goto repeat;
780 pf_cmd = rq_data_dir(pf_req);
781 pf_buf = pf_req->buffer;
782 pf_retries = 0;
784 pf_busy = 1;
785 if (pf_cmd == READ)
786 pi_do_claimed(pf_current->pi, do_pf_read);
787 else if (pf_cmd == WRITE)
788 pi_do_claimed(pf_current->pi, do_pf_write);
789 else {
790 pf_busy = 0;
791 pf_end_request(0);
792 goto repeat;
796 static int pf_next_buf(void)
798 unsigned long saved_flags;
800 pf_count--;
801 pf_run--;
802 pf_buf += 512;
803 pf_block++;
804 if (!pf_run)
805 return 1;
806 if (!pf_count) {
807 spin_lock_irqsave(&pf_spin_lock, saved_flags);
808 pf_end_request(1);
809 pf_req = elv_next_request(pf_queue);
810 spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
811 if (!pf_req)
812 return 1;
813 pf_count = pf_req->current_nr_sectors;
814 pf_buf = pf_req->buffer;
816 return 0;
819 static inline void next_request(int success)
821 unsigned long saved_flags;
823 spin_lock_irqsave(&pf_spin_lock, saved_flags);
824 pf_end_request(success);
825 pf_busy = 0;
826 do_pf_request(pf_queue);
827 spin_unlock_irqrestore(&pf_spin_lock, saved_flags);
830 /* detach from the calling context - in case the spinlock is held */
831 static void do_pf_read(void)
833 ps_set_intr(do_pf_read_start, NULL, 0, nice);
836 static void do_pf_read_start(void)
838 pf_busy = 1;
840 if (pf_start(pf_current, ATAPI_READ_10, pf_block, pf_run)) {
841 pi_disconnect(pf_current->pi);
842 if (pf_retries < PF_MAX_RETRIES) {
843 pf_retries++;
844 pi_do_claimed(pf_current->pi, do_pf_read_start);
845 return;
847 next_request(0);
848 return;
850 pf_mask = STAT_DRQ;
851 ps_set_intr(do_pf_read_drq, pf_ready, PF_TMO, nice);
854 static void do_pf_read_drq(void)
856 while (1) {
857 if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
858 "read block", "completion") & STAT_ERR) {
859 pi_disconnect(pf_current->pi);
860 if (pf_retries < PF_MAX_RETRIES) {
861 pf_req_sense(pf_current, 0);
862 pf_retries++;
863 pi_do_claimed(pf_current->pi, do_pf_read_start);
864 return;
866 next_request(0);
867 return;
869 pi_read_block(pf_current->pi, pf_buf, 512);
870 if (pf_next_buf())
871 break;
873 pi_disconnect(pf_current->pi);
874 next_request(1);
877 static void do_pf_write(void)
879 ps_set_intr(do_pf_write_start, NULL, 0, nice);
882 static void do_pf_write_start(void)
884 pf_busy = 1;
886 if (pf_start(pf_current, ATAPI_WRITE_10, pf_block, pf_run)) {
887 pi_disconnect(pf_current->pi);
888 if (pf_retries < PF_MAX_RETRIES) {
889 pf_retries++;
890 pi_do_claimed(pf_current->pi, do_pf_write_start);
891 return;
893 next_request(0);
894 return;
897 while (1) {
898 if (pf_wait(pf_current, STAT_BUSY, STAT_DRQ | STAT_ERR,
899 "write block", "data wait") & STAT_ERR) {
900 pi_disconnect(pf_current->pi);
901 if (pf_retries < PF_MAX_RETRIES) {
902 pf_retries++;
903 pi_do_claimed(pf_current->pi, do_pf_write_start);
904 return;
906 next_request(0);
907 return;
909 pi_write_block(pf_current->pi, pf_buf, 512);
910 if (pf_next_buf())
911 break;
913 pf_mask = 0;
914 ps_set_intr(do_pf_write_done, pf_ready, PF_TMO, nice);
917 static void do_pf_write_done(void)
919 if (pf_wait(pf_current, STAT_BUSY, 0, "write block", "done") & STAT_ERR) {
920 pi_disconnect(pf_current->pi);
921 if (pf_retries < PF_MAX_RETRIES) {
922 pf_retries++;
923 pi_do_claimed(pf_current->pi, do_pf_write_start);
924 return;
926 next_request(0);
927 return;
929 pi_disconnect(pf_current->pi);
930 next_request(1);
933 static int __init pf_init(void)
934 { /* preliminary initialisation */
935 struct pf_unit *pf;
936 int unit;
938 if (disable)
939 return -EINVAL;
941 pf_init_units();
943 if (pf_detect())
944 return -ENODEV;
945 pf_busy = 0;
947 if (register_blkdev(major, name)) {
948 for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
949 put_disk(pf->disk);
950 return -EBUSY;
952 pf_queue = blk_init_queue(do_pf_request, &pf_spin_lock);
953 if (!pf_queue) {
954 unregister_blkdev(major, name);
955 for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++)
956 put_disk(pf->disk);
957 return -ENOMEM;
960 blk_queue_max_phys_segments(pf_queue, cluster);
961 blk_queue_max_hw_segments(pf_queue, cluster);
963 for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
964 struct gendisk *disk = pf->disk;
966 if (!pf->present)
967 continue;
968 disk->private_data = pf;
969 disk->queue = pf_queue;
970 add_disk(disk);
972 return 0;
975 static void __exit pf_exit(void)
977 struct pf_unit *pf;
978 int unit;
979 unregister_blkdev(major, name);
980 for (pf = units, unit = 0; unit < PF_UNITS; pf++, unit++) {
981 if (!pf->present)
982 continue;
983 del_gendisk(pf->disk);
984 put_disk(pf->disk);
985 pi_release(pf->pi);
987 blk_cleanup_queue(pf_queue);
990 MODULE_LICENSE("GPL");
991 module_init(pf_init)
992 module_exit(pf_exit)