Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / arch / powerpc / platforms / 83xx / mpc837x_mds.c
blob64d17b0d64555cbd4a29271b7f7122abed2caba0
1 /*
2 * arch/powerpc/platforms/83xx/mpc837x_mds.c
4 * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
6 * MPC837x MDS board specific routines
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License as published by the
10 * Free Software Foundation; either version 2 of the License, or (at your
11 * option) any later version.
14 #include <linux/pci.h>
15 #include <linux/of.h>
16 #include <linux/of_platform.h>
18 #include <asm/time.h>
19 #include <asm/ipic.h>
20 #include <asm/udbg.h>
21 #include <asm/prom.h>
23 #include "mpc83xx.h"
25 #define BCSR12_USB_SER_MASK 0x8a
26 #define BCSR12_USB_SER_PIN 0x80
27 #define BCSR12_USB_SER_DEVICE 0x02
28 extern int mpc837x_usb_cfg(void);
30 static int mpc837xmds_usb_cfg(void)
32 struct device_node *np;
33 const void *phy_type, *mode;
34 void __iomem *bcsr_regs = NULL;
35 u8 bcsr12;
36 int ret;
38 ret = mpc837x_usb_cfg();
39 if (ret)
40 return ret;
41 /* Map BCSR area */
42 np = of_find_compatible_node(NULL, NULL, "fsl,mpc837xmds-bcsr");
43 if (np) {
44 bcsr_regs = of_iomap(np, 0);
45 of_node_put(np);
47 if (!bcsr_regs)
48 return -1;
50 np = of_find_node_by_name(NULL, "usb");
51 if (!np)
52 return -ENODEV;
53 phy_type = of_get_property(np, "phy_type", NULL);
54 if (phy_type && !strcmp(phy_type, "ulpi")) {
55 clrbits8(bcsr_regs + 12, BCSR12_USB_SER_PIN);
56 } else if (phy_type && !strcmp(phy_type, "serial")) {
57 mode = of_get_property(np, "dr_mode", NULL);
58 bcsr12 = in_8(bcsr_regs + 12) & ~BCSR12_USB_SER_MASK;
59 bcsr12 |= BCSR12_USB_SER_PIN;
60 if (mode && !strcmp(mode, "peripheral"))
61 bcsr12 |= BCSR12_USB_SER_DEVICE;
62 out_8(bcsr_regs + 12, bcsr12);
63 } else {
64 printk(KERN_ERR "USB DR: unsupported PHY\n");
67 of_node_put(np);
68 iounmap(bcsr_regs);
69 return 0;
72 /* ************************************************************************
74 * Setup the architecture
77 static void __init mpc837x_mds_setup_arch(void)
79 #ifdef CONFIG_PCI
80 struct device_node *np;
81 #endif
83 if (ppc_md.progress)
84 ppc_md.progress("mpc837x_mds_setup_arch()", 0);
86 #ifdef CONFIG_PCI
87 for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
88 mpc83xx_add_bridge(np);
89 #endif
90 mpc837xmds_usb_cfg();
93 static struct of_device_id mpc837x_ids[] = {
94 { .type = "soc", },
95 { .compatible = "soc", },
96 { .compatible = "simple-bus", },
97 {},
100 static int __init mpc837x_declare_of_platform_devices(void)
102 /* Publish of_device */
103 of_platform_bus_probe(NULL, mpc837x_ids, NULL);
105 return 0;
107 machine_device_initcall(mpc837x_mds, mpc837x_declare_of_platform_devices);
109 static void __init mpc837x_mds_init_IRQ(void)
111 struct device_node *np;
113 np = of_find_compatible_node(NULL, NULL, "fsl,ipic");
114 if (!np)
115 return;
117 ipic_init(np, 0);
119 /* Initialize the default interrupt mapping priorities,
120 * in case the boot rom changed something on us.
122 ipic_set_default_priority();
126 * Called very early, MMU is off, device-tree isn't unflattened
128 static int __init mpc837x_mds_probe(void)
130 unsigned long root = of_get_flat_dt_root();
132 return of_flat_dt_is_compatible(root, "fsl,mpc837xmds");
135 define_machine(mpc837x_mds) {
136 .name = "MPC837x MDS",
137 .probe = mpc837x_mds_probe,
138 .setup_arch = mpc837x_mds_setup_arch,
139 .init_IRQ = mpc837x_mds_init_IRQ,
140 .get_irq = ipic_get_irq,
141 .restart = mpc83xx_restart,
142 .time_init = mpc83xx_time_init,
143 .calibrate_decr = generic_calibrate_decr,
144 .progress = udbg_progress,