Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / arch / mips / sibyte / sb1250 / smp.c
blob0734b933e969240054bd54e8f05f65608ba20f4c
1 /*
2 * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 #include <linux/init.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/smp.h>
23 #include <linux/kernel_stat.h>
25 #include <asm/mmu_context.h>
26 #include <asm/io.h>
27 #include <asm/fw/cfe/cfe_api.h>
28 #include <asm/sibyte/sb1250.h>
29 #include <asm/sibyte/sb1250_regs.h>
30 #include <asm/sibyte/sb1250_int.h>
32 static void *mailbox_set_regs[] = {
33 IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
34 IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
37 static void *mailbox_clear_regs[] = {
38 IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
39 IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
42 static void *mailbox_regs[] = {
43 IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
44 IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
48 * SMP init and finish on secondary CPUs
50 void __cpuinit sb1250_smp_init(void)
52 unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
53 STATUSF_IP1 | STATUSF_IP0;
55 /* Set interrupt mask, but don't enable */
56 change_c0_status(ST0_IM, imask);
60 * These are routines for dealing with the sb1250 smp capabilities
61 * independent of board/firmware
65 * Simple enough; everything is set up, so just poke the appropriate mailbox
66 * register, and we should be set
68 static void sb1250_send_ipi_single(int cpu, unsigned int action)
70 __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
73 static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action)
75 unsigned int i;
77 for_each_cpu_mask(i, mask)
78 sb1250_send_ipi_single(i, action);
82 * Code to run on secondary just after probing the CPU
84 static void __cpuinit sb1250_init_secondary(void)
86 extern void sb1250_smp_init(void);
88 sb1250_smp_init();
92 * Do any tidying up before marking online and running the idle
93 * loop
95 static void __cpuinit sb1250_smp_finish(void)
97 extern void sb1250_clockevent_init(void);
99 sb1250_clockevent_init();
100 local_irq_enable();
104 * Final cleanup after all secondaries booted
106 static void sb1250_cpus_done(void)
111 * Setup the PC, SP, and GP of a secondary processor and start it
112 * running!
114 static void __cpuinit sb1250_boot_secondary(int cpu, struct task_struct *idle)
116 int retval;
118 retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
119 __KSTK_TOS(idle),
120 (unsigned long)task_thread_info(idle), 0);
121 if (retval != 0)
122 printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
126 * Use CFE to find out how many CPUs are available, setting up
127 * phys_cpu_present_map and the logical/physical mappings.
128 * XXXKW will the boot CPU ever not be physical 0?
130 * Common setup before any secondaries are started
132 static void __init sb1250_smp_setup(void)
134 int i, num;
136 cpus_clear(phys_cpu_present_map);
137 cpu_set(0, phys_cpu_present_map);
138 __cpu_number_map[0] = 0;
139 __cpu_logical_map[0] = 0;
141 for (i = 1, num = 0; i < NR_CPUS; i++) {
142 if (cfe_cpu_stop(i) == 0) {
143 cpu_set(i, phys_cpu_present_map);
144 __cpu_number_map[i] = ++num;
145 __cpu_logical_map[num] = i;
148 printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
151 static void __init sb1250_prepare_cpus(unsigned int max_cpus)
155 struct plat_smp_ops sb_smp_ops = {
156 .send_ipi_single = sb1250_send_ipi_single,
157 .send_ipi_mask = sb1250_send_ipi_mask,
158 .init_secondary = sb1250_init_secondary,
159 .smp_finish = sb1250_smp_finish,
160 .cpus_done = sb1250_cpus_done,
161 .boot_secondary = sb1250_boot_secondary,
162 .smp_setup = sb1250_smp_setup,
163 .prepare_cpus = sb1250_prepare_cpus,
166 void sb1250_mailbox_interrupt(void)
168 int cpu = smp_processor_id();
169 unsigned int action;
171 kstat_this_cpu.irqs[K_INT_MBOX_0]++;
172 /* Load the mailbox register to figure out what we're supposed to do */
173 action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
175 /* Clear the mailbox to clear the interrupt */
176 ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
179 * Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
180 * interrupt will do the reschedule for us
183 if (action & SMP_CALL_FUNCTION)
184 smp_call_function_interrupt();