arch/mips/sgi-ip22/ip22-mc.c

   1 /*
   2  * ip22-mc.c: Routines for manipulating SGI Memory Controller.
   3  *
   4  * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
   5  * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) - Indigo2 changes
   6  * Copyright (C) 2003 Ladislav Michl  (ladis@linux-mips.org)
   7  * Copyright (C) 2004 Peter Fuerst    (pf@net.alphadv.de) - IP28
   8  */
   9
  10 #include <linux/init.h>
  11 #include <linux/module.h>
  12 #include <linux/kernel.h>
  13
  14 #include <asm/io.h>
  15 #include <asm/bootinfo.h>
  16 #include <asm/sgialib.h>
  17 #include <asm/sgi/mc.h>
  18 #include <asm/sgi/hpc3.h>
  19 #include <asm/sgi/ip22.h>
  20
  21 struct sgimc_regs *sgimc;
  22
  23 EXPORT_SYMBOL(sgimc);
  24
  25 static inline unsigned long get_bank_addr(unsigned int memconfig)
  26 {
  27         return ((memconfig & SGIMC_MCONFIG_BASEADDR) <<
  28                 ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 24 : 22));
  29 }
  30
  31 static inline unsigned long get_bank_size(unsigned int memconfig)
  32 {
  33         return ((memconfig & SGIMC_MCONFIG_RMASK) + 0x0100) <<
  34                 ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 16 : 14);
  35 }
  36
  37 static inline unsigned int get_bank_config(int bank)
  38 {
  39         unsigned int res = bank > 1 ? sgimc->mconfig1 : sgimc->mconfig0;
  40         return bank % 2 ? res & 0xffff : res >> 16;
  41 }
  42
  43 struct mem {
  44         unsigned long addr;
  45         unsigned long size;
  46 };
  47
  48 /*
  49  * Detect installed memory, do some sanity checks and notify kernel about it
  50  */
  51 static void __init probe_memory(void)
  52 {
  53         int i, j, found, cnt = 0;
  54         struct mem bank[4];
  55         struct mem space[2] = {{SGIMC_SEG0_BADDR, 0}, {SGIMC_SEG1_BADDR, 0}};
  56
  57         printk(KERN_INFO "MC: Probing memory configuration:\n");
  58         for (i = 0; i < ARRAY_SIZE(bank); i++) {
  59                 unsigned int tmp = get_bank_config(i);
  60                 if (!(tmp & SGIMC_MCONFIG_BVALID))
  61                         continue;
  62
  63                 bank[cnt].size = get_bank_size(tmp);
  64                 bank[cnt].addr = get_bank_addr(tmp);
  65                 printk(KERN_INFO " bank%d: %3ldM @ %08lx\n",
  66                         i, bank[cnt].size / 1024 / 1024, bank[cnt].addr);
  67                 cnt++;
  68         }
  69
  70         /* And you thought bubble sort is dead algorithm... */
  71         do {
  72                 unsigned long addr, size;
  73
  74                 found = 0;
  75                 for (i = 1; i < cnt; i++)
  76                         if (bank[i-1].addr > bank[i].addr) {
  77                                 addr = bank[i].addr;
  78                                 size = bank[i].size;
  79                                 bank[i].addr = bank[i-1].addr;
  80                                 bank[i].size = bank[i-1].size;
  81                                 bank[i-1].addr = addr;
  82                                 bank[i-1].size = size;
  83                                 found = 1;
  84                         }
  85         } while (found);
  86
  87         /* Figure out how are memory banks mapped into spaces */
  88         for (i = 0; i < cnt; i++) {
  89                 found = 0;
  90                 for (j = 0; j < ARRAY_SIZE(space) && !found; j++)
  91                         if (space[j].addr + space[j].size == bank[i].addr) {
  92                                 space[j].size += bank[i].size;
  93                                 found = 1;
  94                         }
  95                 /* There is either hole or overlapping memory */
  96                 if (!found)
  97                         printk(KERN_CRIT "MC: Memory configuration mismatch "
  98                                          "(%08lx), expect Bus Error soon\n",
  99                                          bank[i].addr);
 100         }
 101
 102         for (i = 0; i < ARRAY_SIZE(space); i++)
 103                 if (space[i].size)
 104                         add_memory_region(space[i].addr, space[i].size,
 105                                           BOOT_MEM_RAM);
 106 }
 107
 108 void __init sgimc_init(void)
 109 {
 110         u32 tmp;
 111
 112         /* ioremap can't fail */
 113         sgimc = (struct sgimc_regs *)
 114                 ioremap(SGIMC_BASE, sizeof(struct sgimc_regs));
 115
 116         printk(KERN_INFO "MC: SGI memory controller Revision %d\n",
 117                (int) sgimc->systemid & SGIMC_SYSID_MASKREV);
 118
 119         /* Place the MC into a known state.  This must be done before
 120          * interrupts are first enabled etc.
 121          */
 122
 123         /* Step 0: Make sure we turn off the watchdog in case it's
 124          *         still running (which might be the case after a
 125          *         soft reboot).
 126          */
 127         tmp = sgimc->cpuctrl0;
 128         tmp &= ~SGIMC_CCTRL0_WDOG;
 129         sgimc->cpuctrl0 = tmp;
 130
 131         /* Step 1: The CPU/GIO error status registers will not latch
 132          *         up a new error status until the register has been
 133          *         cleared by the cpu.  These status registers are
 134          *         cleared by writing any value to them.
 135          */
 136         sgimc->cstat = sgimc->gstat = 0;
 137
 138         /* Step 2: Enable all parity checking in cpu control register
 139          *         zero.
 140          */
 141         /* don't touch parity settings for IP28 */
 142 #ifndef CONFIG_SGI_IP28
 143         tmp = sgimc->cpuctrl0;
 144         tmp |= (SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM |
 145                 SGIMC_CCTRL0_R4KNOCHKPARR);
 146 #endif
 147         sgimc->cpuctrl0 = tmp;
 148
 149         /* Step 3: Setup the MC write buffer depth, this is controlled
 150          *         in cpu control register 1 in the lower 4 bits.
 151          */
 152         tmp = sgimc->cpuctrl1;
 153         tmp &= ~0xf;
 154         tmp |= 0xd;
 155         sgimc->cpuctrl1 = tmp;
 156
 157         /* Step 4: Initialize the RPSS divider register to run as fast
 158          *         as it can correctly operate.  The register is laid
 159          *         out as follows:
 160          *
 161          *         ----------------------------------------
 162          *         |  RESERVED  |   INCREMENT   | DIVIDER |
 163          *         ----------------------------------------
 164          *          31        16 15            8 7       0
 165          *
 166          *         DIVIDER determines how often a 'tick' happens,
 167          *         INCREMENT determines by how the RPSS increment
 168          *         registers value increases at each 'tick'. Thus,
 169          *         for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101
 170          */
 171         sgimc->divider = 0x101;
 172
 173         /* Step 5: Initialize GIO64 arbitrator configuration register.
 174          *
 175          * NOTE: HPC init code in sgihpc_init() must run before us because
 176          *       we need to know Guiness vs. FullHouse and the board
 177          *       revision on this machine. You have been warned.
 178          */
 179
 180         /* First the basic invariants across all GIO64 implementations. */
 181         tmp = SGIMC_GIOPAR_HPC64;       /* All 1st HPC's interface at 64bits */
 182         tmp |= SGIMC_GIOPAR_ONEBUS;     /* Only one physical GIO bus exists */
 183
 184         if (ip22_is_fullhouse()) {
 185                 /* Fullhouse specific settings. */
 186                 if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) {
 187                         tmp |= SGIMC_GIOPAR_HPC264;     /* 2nd HPC at 64bits */
 188                         tmp |= SGIMC_GIOPAR_PLINEEXP0;  /* exp0 pipelines */
 189                         tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */
 190                         tmp |= SGIMC_GIOPAR_RTIMEEXP0;  /* exp0 is realtime */
 191                 } else {
 192                         tmp |= SGIMC_GIOPAR_HPC264;     /* 2nd HPC 64bits */
 193                         tmp |= SGIMC_GIOPAR_PLINEEXP0;  /* exp[01] pipelined */
 194                         tmp |= SGIMC_GIOPAR_PLINEEXP1;
 195                         tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */
 196                         tmp |= SGIMC_GIOPAR_GFX64;      /* GFX at 64 bits */
 197                 }
 198         } else {
 199                 /* Guiness specific settings. */
 200                 tmp |= SGIMC_GIOPAR_EISA64;     /* MC talks to EISA at 64bits */
 201                 tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */
 202         }
 203         sgimc->giopar = tmp;    /* poof */
 204
 205         probe_memory();
 206 }
 207
 208 void __init prom_meminit(void) {}
 209 void __init prom_free_prom_memory(void)
 210 {
 211 }