Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / arch / mips / kernel / vpe.c
blob39804c584eddbaf794a3eda5526bd8122f3bb817
1 /*
2 * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved.
4 * This program is free software; you can distribute it and/or modify it
5 * under the terms of the GNU General Public License (Version 2) as
6 * published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
11 * for more details.
13 * You should have received a copy of the GNU General Public License along
14 * with this program; if not, write to the Free Software Foundation, Inc.,
15 * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
19 * VPE support module
21 * Provides support for loading a MIPS SP program on VPE1.
22 * The SP enviroment is rather simple, no tlb's. It needs to be relocatable
23 * (or partially linked). You should initialise your stack in the startup
24 * code. This loader looks for the symbol __start and sets up
25 * execution to resume from there. The MIPS SDE kit contains suitable examples.
27 * To load and run, simply cat a SP 'program file' to /dev/vpe1.
28 * i.e cat spapp >/dev/vpe1.
30 #include <linux/kernel.h>
31 #include <linux/device.h>
32 #include <linux/module.h>
33 #include <linux/fs.h>
34 #include <linux/init.h>
35 #include <asm/uaccess.h>
36 #include <linux/slab.h>
37 #include <linux/list.h>
38 #include <linux/vmalloc.h>
39 #include <linux/elf.h>
40 #include <linux/seq_file.h>
41 #include <linux/syscalls.h>
42 #include <linux/moduleloader.h>
43 #include <linux/interrupt.h>
44 #include <linux/poll.h>
45 #include <linux/bootmem.h>
46 #include <asm/mipsregs.h>
47 #include <asm/mipsmtregs.h>
48 #include <asm/cacheflush.h>
49 #include <asm/atomic.h>
50 #include <asm/cpu.h>
51 #include <asm/mips_mt.h>
52 #include <asm/processor.h>
53 #include <asm/system.h>
54 #include <asm/vpe.h>
55 #include <asm/kspd.h>
57 typedef void *vpe_handle;
59 #ifndef ARCH_SHF_SMALL
60 #define ARCH_SHF_SMALL 0
61 #endif
63 /* If this is set, the section belongs in the init part of the module */
64 #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1))
67 * The number of TCs and VPEs physically available on the core
69 static int hw_tcs, hw_vpes;
70 static char module_name[] = "vpe";
71 static int major;
72 static const int minor = 1; /* fixed for now */
74 #ifdef CONFIG_MIPS_APSP_KSPD
75 static struct kspd_notifications kspd_events;
76 static int kspd_events_reqd = 0;
77 #endif
79 /* grab the likely amount of memory we will need. */
80 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
81 #define P_SIZE (2 * 1024 * 1024)
82 #else
83 /* add an overhead to the max kmalloc size for non-striped symbols/etc */
84 #define P_SIZE (256 * 1024)
85 #endif
87 extern unsigned long physical_memsize;
89 #define MAX_VPES 16
90 #define VPE_PATH_MAX 256
92 enum vpe_state {
93 VPE_STATE_UNUSED = 0,
94 VPE_STATE_INUSE,
95 VPE_STATE_RUNNING
98 enum tc_state {
99 TC_STATE_UNUSED = 0,
100 TC_STATE_INUSE,
101 TC_STATE_RUNNING,
102 TC_STATE_DYNAMIC
105 struct vpe {
106 enum vpe_state state;
108 /* (device) minor associated with this vpe */
109 int minor;
111 /* elfloader stuff */
112 void *load_addr;
113 unsigned long len;
114 char *pbuffer;
115 unsigned long plen;
116 unsigned int uid, gid;
117 char cwd[VPE_PATH_MAX];
119 unsigned long __start;
121 /* tc's associated with this vpe */
122 struct list_head tc;
124 /* The list of vpe's */
125 struct list_head list;
127 /* shared symbol address */
128 void *shared_ptr;
130 /* the list of who wants to know when something major happens */
131 struct list_head notify;
133 unsigned int ntcs;
136 struct tc {
137 enum tc_state state;
138 int index;
140 struct vpe *pvpe; /* parent VPE */
141 struct list_head tc; /* The list of TC's with this VPE */
142 struct list_head list; /* The global list of tc's */
145 struct {
146 /* Virtual processing elements */
147 struct list_head vpe_list;
149 /* Thread contexts */
150 struct list_head tc_list;
151 } vpecontrol = {
152 .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
153 .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
156 static void release_progmem(void *ptr);
157 extern void save_gp_address(unsigned int secbase, unsigned int rel);
159 /* get the vpe associated with this minor */
160 struct vpe *get_vpe(int minor)
162 struct vpe *v;
164 if (!cpu_has_mipsmt)
165 return NULL;
167 list_for_each_entry(v, &vpecontrol.vpe_list, list) {
168 if (v->minor == minor)
169 return v;
172 return NULL;
175 /* get the vpe associated with this minor */
176 struct tc *get_tc(int index)
178 struct tc *t;
180 list_for_each_entry(t, &vpecontrol.tc_list, list) {
181 if (t->index == index)
182 return t;
185 return NULL;
188 struct tc *get_tc_unused(void)
190 struct tc *t;
192 list_for_each_entry(t, &vpecontrol.tc_list, list) {
193 if (t->state == TC_STATE_UNUSED)
194 return t;
197 return NULL;
200 /* allocate a vpe and associate it with this minor (or index) */
201 struct vpe *alloc_vpe(int minor)
203 struct vpe *v;
205 if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
206 return NULL;
209 INIT_LIST_HEAD(&v->tc);
210 list_add_tail(&v->list, &vpecontrol.vpe_list);
212 INIT_LIST_HEAD(&v->notify);
213 v->minor = minor;
214 return v;
217 /* allocate a tc. At startup only tc0 is running, all other can be halted. */
218 struct tc *alloc_tc(int index)
220 struct tc *tc;
222 if ((tc = kzalloc(sizeof(struct tc), GFP_KERNEL)) == NULL)
223 goto out;
225 INIT_LIST_HEAD(&tc->tc);
226 tc->index = index;
227 list_add_tail(&tc->list, &vpecontrol.tc_list);
229 out:
230 return tc;
233 /* clean up and free everything */
234 void release_vpe(struct vpe *v)
236 list_del(&v->list);
237 if (v->load_addr)
238 release_progmem(v);
239 kfree(v);
242 void dump_mtregs(void)
244 unsigned long val;
246 val = read_c0_config3();
247 printk("config3 0x%lx MT %ld\n", val,
248 (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT);
250 val = read_c0_mvpcontrol();
251 printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val,
252 (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT,
253 (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT,
254 (val & MVPCONTROL_EVP));
256 val = read_c0_mvpconf0();
257 printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val,
258 (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT,
259 val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT);
262 /* Find some VPE program space */
263 static void *alloc_progmem(unsigned long len)
265 void *addr;
267 #ifdef CONFIG_MIPS_VPE_LOADER_TOM
269 * This means you must tell Linux to use less memory than you
270 * physically have, for example by passing a mem= boot argument.
272 addr = pfn_to_kaddr(max_pfn);
273 memset(addr, 0, len);
274 #else
275 /* simple grab some mem for now */
276 addr = kzalloc(len, GFP_KERNEL);
277 #endif
279 return addr;
282 static void release_progmem(void *ptr)
284 #ifndef CONFIG_MIPS_VPE_LOADER_TOM
285 kfree(ptr);
286 #endif
289 /* Update size with this section: return offset. */
290 static long get_offset(unsigned long *size, Elf_Shdr * sechdr)
292 long ret;
294 ret = ALIGN(*size, sechdr->sh_addralign ? : 1);
295 *size = ret + sechdr->sh_size;
296 return ret;
299 /* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld
300 might -- code, read-only data, read-write data, small data. Tally
301 sizes, and place the offsets into sh_entsize fields: high bit means it
302 belongs in init. */
303 static void layout_sections(struct module *mod, const Elf_Ehdr * hdr,
304 Elf_Shdr * sechdrs, const char *secstrings)
306 static unsigned long const masks[][2] = {
307 /* NOTE: all executable code must be the first section
308 * in this array; otherwise modify the text_size
309 * finder in the two loops below */
310 {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL},
311 {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL},
312 {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL},
313 {ARCH_SHF_SMALL | SHF_ALLOC, 0}
315 unsigned int m, i;
317 for (i = 0; i < hdr->e_shnum; i++)
318 sechdrs[i].sh_entsize = ~0UL;
320 for (m = 0; m < ARRAY_SIZE(masks); ++m) {
321 for (i = 0; i < hdr->e_shnum; ++i) {
322 Elf_Shdr *s = &sechdrs[i];
324 // || strncmp(secstrings + s->sh_name, ".init", 5) == 0)
325 if ((s->sh_flags & masks[m][0]) != masks[m][0]
326 || (s->sh_flags & masks[m][1])
327 || s->sh_entsize != ~0UL)
328 continue;
329 s->sh_entsize = get_offset(&mod->core_size, s);
332 if (m == 0)
333 mod->core_text_size = mod->core_size;
339 /* from module-elf32.c, but subverted a little */
341 struct mips_hi16 {
342 struct mips_hi16 *next;
343 Elf32_Addr *addr;
344 Elf32_Addr value;
347 static struct mips_hi16 *mips_hi16_list;
348 static unsigned int gp_offs, gp_addr;
350 static int apply_r_mips_none(struct module *me, uint32_t *location,
351 Elf32_Addr v)
353 return 0;
356 static int apply_r_mips_gprel16(struct module *me, uint32_t *location,
357 Elf32_Addr v)
359 int rel;
361 if( !(*location & 0xffff) ) {
362 rel = (int)v - gp_addr;
364 else {
365 /* .sbss + gp(relative) + offset */
366 /* kludge! */
367 rel = (int)(short)((int)v + gp_offs +
368 (int)(short)(*location & 0xffff) - gp_addr);
371 if( (rel > 32768) || (rel < -32768) ) {
372 printk(KERN_DEBUG "VPE loader: apply_r_mips_gprel16: "
373 "relative address 0x%x out of range of gp register\n",
374 rel);
375 return -ENOEXEC;
378 *location = (*location & 0xffff0000) | (rel & 0xffff);
380 return 0;
383 static int apply_r_mips_pc16(struct module *me, uint32_t *location,
384 Elf32_Addr v)
386 int rel;
387 rel = (((unsigned int)v - (unsigned int)location));
388 rel >>= 2; // because the offset is in _instructions_ not bytes.
389 rel -= 1; // and one instruction less due to the branch delay slot.
391 if( (rel > 32768) || (rel < -32768) ) {
392 printk(KERN_DEBUG "VPE loader: "
393 "apply_r_mips_pc16: relative address out of range 0x%x\n", rel);
394 return -ENOEXEC;
397 *location = (*location & 0xffff0000) | (rel & 0xffff);
399 return 0;
402 static int apply_r_mips_32(struct module *me, uint32_t *location,
403 Elf32_Addr v)
405 *location += v;
407 return 0;
410 static int apply_r_mips_26(struct module *me, uint32_t *location,
411 Elf32_Addr v)
413 if (v % 4) {
414 printk(KERN_DEBUG "VPE loader: apply_r_mips_26 "
415 " unaligned relocation\n");
416 return -ENOEXEC;
420 * Not desperately convinced this is a good check of an overflow condition
421 * anyway. But it gets in the way of handling undefined weak symbols which
422 * we want to set to zero.
423 * if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) {
424 * printk(KERN_ERR
425 * "module %s: relocation overflow\n",
426 * me->name);
427 * return -ENOEXEC;
431 *location = (*location & ~0x03ffffff) |
432 ((*location + (v >> 2)) & 0x03ffffff);
433 return 0;
436 static int apply_r_mips_hi16(struct module *me, uint32_t *location,
437 Elf32_Addr v)
439 struct mips_hi16 *n;
442 * We cannot relocate this one now because we don't know the value of
443 * the carry we need to add. Save the information, and let LO16 do the
444 * actual relocation.
446 n = kmalloc(sizeof *n, GFP_KERNEL);
447 if (!n)
448 return -ENOMEM;
450 n->addr = location;
451 n->value = v;
452 n->next = mips_hi16_list;
453 mips_hi16_list = n;
455 return 0;
458 static int apply_r_mips_lo16(struct module *me, uint32_t *location,
459 Elf32_Addr v)
461 unsigned long insnlo = *location;
462 Elf32_Addr val, vallo;
464 /* Sign extend the addend we extract from the lo insn. */
465 vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000;
467 if (mips_hi16_list != NULL) {
468 struct mips_hi16 *l;
470 l = mips_hi16_list;
471 while (l != NULL) {
472 struct mips_hi16 *next;
473 unsigned long insn;
476 * The value for the HI16 had best be the same.
478 if (v != l->value) {
479 printk(KERN_DEBUG "VPE loader: "
480 "apply_r_mips_lo16/hi16: \t"
481 "inconsistent value information\n");
482 return -ENOEXEC;
486 * Do the HI16 relocation. Note that we actually don't
487 * need to know anything about the LO16 itself, except
488 * where to find the low 16 bits of the addend needed
489 * by the LO16.
491 insn = *l->addr;
492 val = ((insn & 0xffff) << 16) + vallo;
493 val += v;
496 * Account for the sign extension that will happen in
497 * the low bits.
499 val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff;
501 insn = (insn & ~0xffff) | val;
502 *l->addr = insn;
504 next = l->next;
505 kfree(l);
506 l = next;
509 mips_hi16_list = NULL;
513 * Ok, we're done with the HI16 relocs. Now deal with the LO16.
515 val = v + vallo;
516 insnlo = (insnlo & ~0xffff) | (val & 0xffff);
517 *location = insnlo;
519 return 0;
522 static int (*reloc_handlers[]) (struct module *me, uint32_t *location,
523 Elf32_Addr v) = {
524 [R_MIPS_NONE] = apply_r_mips_none,
525 [R_MIPS_32] = apply_r_mips_32,
526 [R_MIPS_26] = apply_r_mips_26,
527 [R_MIPS_HI16] = apply_r_mips_hi16,
528 [R_MIPS_LO16] = apply_r_mips_lo16,
529 [R_MIPS_GPREL16] = apply_r_mips_gprel16,
530 [R_MIPS_PC16] = apply_r_mips_pc16
533 static char *rstrs[] = {
534 [R_MIPS_NONE] = "MIPS_NONE",
535 [R_MIPS_32] = "MIPS_32",
536 [R_MIPS_26] = "MIPS_26",
537 [R_MIPS_HI16] = "MIPS_HI16",
538 [R_MIPS_LO16] = "MIPS_LO16",
539 [R_MIPS_GPREL16] = "MIPS_GPREL16",
540 [R_MIPS_PC16] = "MIPS_PC16"
543 int apply_relocations(Elf32_Shdr *sechdrs,
544 const char *strtab,
545 unsigned int symindex,
546 unsigned int relsec,
547 struct module *me)
549 Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr;
550 Elf32_Sym *sym;
551 uint32_t *location;
552 unsigned int i;
553 Elf32_Addr v;
554 int res;
556 for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) {
557 Elf32_Word r_info = rel[i].r_info;
559 /* This is where to make the change */
560 location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
561 + rel[i].r_offset;
562 /* This is the symbol it is referring to */
563 sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
564 + ELF32_R_SYM(r_info);
566 if (!sym->st_value) {
567 printk(KERN_DEBUG "%s: undefined weak symbol %s\n",
568 me->name, strtab + sym->st_name);
569 /* just print the warning, dont barf */
572 v = sym->st_value;
574 res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v);
575 if( res ) {
576 char *r = rstrs[ELF32_R_TYPE(r_info)];
577 printk(KERN_WARNING "VPE loader: .text+0x%x "
578 "relocation type %s for symbol \"%s\" failed\n",
579 rel[i].r_offset, r ? r : "UNKNOWN",
580 strtab + sym->st_name);
581 return res;
585 return 0;
588 void save_gp_address(unsigned int secbase, unsigned int rel)
590 gp_addr = secbase + rel;
591 gp_offs = gp_addr - (secbase & 0xffff0000);
593 /* end module-elf32.c */
597 /* Change all symbols so that sh_value encodes the pointer directly. */
598 static void simplify_symbols(Elf_Shdr * sechdrs,
599 unsigned int symindex,
600 const char *strtab,
601 const char *secstrings,
602 unsigned int nsecs, struct module *mod)
604 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
605 unsigned long secbase, bssbase = 0;
606 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
607 int size;
609 /* find the .bss section for COMMON symbols */
610 for (i = 0; i < nsecs; i++) {
611 if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) {
612 bssbase = sechdrs[i].sh_addr;
613 break;
617 for (i = 1; i < n; i++) {
618 switch (sym[i].st_shndx) {
619 case SHN_COMMON:
620 /* Allocate space for the symbol in the .bss section.
621 st_value is currently size.
622 We want it to have the address of the symbol. */
624 size = sym[i].st_value;
625 sym[i].st_value = bssbase;
627 bssbase += size;
628 break;
630 case SHN_ABS:
631 /* Don't need to do anything */
632 break;
634 case SHN_UNDEF:
635 /* ret = -ENOENT; */
636 break;
638 case SHN_MIPS_SCOMMON:
639 printk(KERN_DEBUG "simplify_symbols: ignoring SHN_MIPS_SCOMMON "
640 "symbol <%s> st_shndx %d\n", strtab + sym[i].st_name,
641 sym[i].st_shndx);
642 // .sbss section
643 break;
645 default:
646 secbase = sechdrs[sym[i].st_shndx].sh_addr;
648 if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) {
649 save_gp_address(secbase, sym[i].st_value);
652 sym[i].st_value += secbase;
653 break;
658 #ifdef DEBUG_ELFLOADER
659 static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex,
660 const char *strtab, struct module *mod)
662 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
663 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
665 printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n);
666 for (i = 1; i < n; i++) {
667 printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i,
668 strtab + sym[i].st_name, sym[i].st_value);
671 #endif
673 /* We are prepared so configure and start the VPE... */
674 static int vpe_run(struct vpe * v)
676 unsigned long flags, val, dmt_flag;
677 struct vpe_notifications *n;
678 unsigned int vpeflags;
679 struct tc *t;
681 /* check we are the Master VPE */
682 local_irq_save(flags);
683 val = read_c0_vpeconf0();
684 if (!(val & VPECONF0_MVP)) {
685 printk(KERN_WARNING
686 "VPE loader: only Master VPE's are allowed to configure MT\n");
687 local_irq_restore(flags);
689 return -1;
692 dmt_flag = dmt();
693 vpeflags = dvpe();
695 if (!list_empty(&v->tc)) {
696 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
697 evpe(vpeflags);
698 emt(dmt_flag);
699 local_irq_restore(flags);
701 printk(KERN_WARNING
702 "VPE loader: TC %d is already in use.\n",
703 t->index);
704 return -ENOEXEC;
706 } else {
707 evpe(vpeflags);
708 emt(dmt_flag);
709 local_irq_restore(flags);
711 printk(KERN_WARNING
712 "VPE loader: No TC's associated with VPE %d\n",
713 v->minor);
715 return -ENOEXEC;
718 /* Put MVPE's into 'configuration state' */
719 set_c0_mvpcontrol(MVPCONTROL_VPC);
721 settc(t->index);
723 /* should check it is halted, and not activated */
724 if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) {
725 evpe(vpeflags);
726 emt(dmt_flag);
727 local_irq_restore(flags);
729 printk(KERN_WARNING "VPE loader: TC %d is already active!\n",
730 t->index);
732 return -ENOEXEC;
735 /* Write the address we want it to start running from in the TCPC register. */
736 write_tc_c0_tcrestart((unsigned long)v->__start);
737 write_tc_c0_tccontext((unsigned long)0);
740 * Mark the TC as activated, not interrupt exempt and not dynamically
741 * allocatable
743 val = read_tc_c0_tcstatus();
744 val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A;
745 write_tc_c0_tcstatus(val);
747 write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H);
750 * The sde-kit passes 'memsize' to __start in $a3, so set something
751 * here... Or set $a3 to zero and define DFLT_STACK_SIZE and
752 * DFLT_HEAP_SIZE when you compile your program
754 mttgpr(6, v->ntcs);
755 mttgpr(7, physical_memsize);
757 /* set up VPE1 */
759 * bind the TC to VPE 1 as late as possible so we only have the final
760 * VPE registers to set up, and so an EJTAG probe can trigger on it
762 write_tc_c0_tcbind((read_tc_c0_tcbind() & ~TCBIND_CURVPE) | 1);
764 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~(VPECONF0_VPA));
766 back_to_back_c0_hazard();
768 /* Set up the XTC bit in vpeconf0 to point at our tc */
769 write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
770 | (t->index << VPECONF0_XTC_SHIFT));
772 back_to_back_c0_hazard();
774 /* enable this VPE */
775 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
777 /* clear out any left overs from a previous program */
778 write_vpe_c0_status(0);
779 write_vpe_c0_cause(0);
781 /* take system out of configuration state */
782 clear_c0_mvpcontrol(MVPCONTROL_VPC);
784 #ifdef CONFIG_SMP
785 evpe(EVPE_ENABLE);
786 #else
787 evpe(vpeflags);
788 #endif
789 emt(dmt_flag);
790 local_irq_restore(flags);
792 list_for_each_entry(n, &v->notify, list)
793 n->start(minor);
795 return 0;
798 static int find_vpe_symbols(struct vpe * v, Elf_Shdr * sechdrs,
799 unsigned int symindex, const char *strtab,
800 struct module *mod)
802 Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr;
803 unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
805 for (i = 1; i < n; i++) {
806 if (strcmp(strtab + sym[i].st_name, "__start") == 0) {
807 v->__start = sym[i].st_value;
810 if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) {
811 v->shared_ptr = (void *)sym[i].st_value;
815 if ( (v->__start == 0) || (v->shared_ptr == NULL))
816 return -1;
818 return 0;
822 * Allocates a VPE with some program code space(the load address), copies the
823 * contents of the program (p)buffer performing relocatations/etc, free's it
824 * when finished.
826 static int vpe_elfload(struct vpe * v)
828 Elf_Ehdr *hdr;
829 Elf_Shdr *sechdrs;
830 long err = 0;
831 char *secstrings, *strtab = NULL;
832 unsigned int len, i, symindex = 0, strindex = 0, relocate = 0;
833 struct module mod; // so we can re-use the relocations code
835 memset(&mod, 0, sizeof(struct module));
836 strcpy(mod.name, "VPE loader");
838 hdr = (Elf_Ehdr *) v->pbuffer;
839 len = v->plen;
841 /* Sanity checks against insmoding binaries or wrong arch,
842 weird elf version */
843 if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
844 || (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
845 || !elf_check_arch(hdr)
846 || hdr->e_shentsize != sizeof(*sechdrs)) {
847 printk(KERN_WARNING
848 "VPE loader: program wrong arch or weird elf version\n");
850 return -ENOEXEC;
853 if (hdr->e_type == ET_REL)
854 relocate = 1;
856 if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) {
857 printk(KERN_ERR "VPE loader: program length %u truncated\n",
858 len);
860 return -ENOEXEC;
863 /* Convenience variables */
864 sechdrs = (void *)hdr + hdr->e_shoff;
865 secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
866 sechdrs[0].sh_addr = 0;
868 /* And these should exist, but gcc whinges if we don't init them */
869 symindex = strindex = 0;
871 if (relocate) {
872 for (i = 1; i < hdr->e_shnum; i++) {
873 if (sechdrs[i].sh_type != SHT_NOBITS
874 && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) {
875 printk(KERN_ERR "VPE program length %u truncated\n",
876 len);
877 return -ENOEXEC;
880 /* Mark all sections sh_addr with their address in the
881 temporary image. */
882 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
884 /* Internal symbols and strings. */
885 if (sechdrs[i].sh_type == SHT_SYMTAB) {
886 symindex = i;
887 strindex = sechdrs[i].sh_link;
888 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
891 layout_sections(&mod, hdr, sechdrs, secstrings);
894 v->load_addr = alloc_progmem(mod.core_size);
895 if (!v->load_addr)
896 return -ENOMEM;
898 pr_info("VPE loader: loading to %p\n", v->load_addr);
900 if (relocate) {
901 for (i = 0; i < hdr->e_shnum; i++) {
902 void *dest;
904 if (!(sechdrs[i].sh_flags & SHF_ALLOC))
905 continue;
907 dest = v->load_addr + sechdrs[i].sh_entsize;
909 if (sechdrs[i].sh_type != SHT_NOBITS)
910 memcpy(dest, (void *)sechdrs[i].sh_addr,
911 sechdrs[i].sh_size);
912 /* Update sh_addr to point to copy in image. */
913 sechdrs[i].sh_addr = (unsigned long)dest;
915 printk(KERN_DEBUG " section sh_name %s sh_addr 0x%x\n",
916 secstrings + sechdrs[i].sh_name, sechdrs[i].sh_addr);
919 /* Fix up syms, so that st_value is a pointer to location. */
920 simplify_symbols(sechdrs, symindex, strtab, secstrings,
921 hdr->e_shnum, &mod);
923 /* Now do relocations. */
924 for (i = 1; i < hdr->e_shnum; i++) {
925 const char *strtab = (char *)sechdrs[strindex].sh_addr;
926 unsigned int info = sechdrs[i].sh_info;
928 /* Not a valid relocation section? */
929 if (info >= hdr->e_shnum)
930 continue;
932 /* Don't bother with non-allocated sections */
933 if (!(sechdrs[info].sh_flags & SHF_ALLOC))
934 continue;
936 if (sechdrs[i].sh_type == SHT_REL)
937 err = apply_relocations(sechdrs, strtab, symindex, i,
938 &mod);
939 else if (sechdrs[i].sh_type == SHT_RELA)
940 err = apply_relocate_add(sechdrs, strtab, symindex, i,
941 &mod);
942 if (err < 0)
943 return err;
946 } else {
947 struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
949 for (i = 0; i < hdr->e_phnum; i++) {
950 if (phdr->p_type != PT_LOAD)
951 continue;
953 memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
954 memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
955 phdr++;
958 for (i = 0; i < hdr->e_shnum; i++) {
959 /* Internal symbols and strings. */
960 if (sechdrs[i].sh_type == SHT_SYMTAB) {
961 symindex = i;
962 strindex = sechdrs[i].sh_link;
963 strtab = (char *)hdr + sechdrs[strindex].sh_offset;
965 /* mark the symtab's address for when we try to find the
966 magic symbols */
967 sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset;
972 /* make sure it's physically written out */
973 flush_icache_range((unsigned long)v->load_addr,
974 (unsigned long)v->load_addr + v->len);
976 if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) {
977 if (v->__start == 0) {
978 printk(KERN_WARNING "VPE loader: program does not contain "
979 "a __start symbol\n");
980 return -ENOEXEC;
983 if (v->shared_ptr == NULL)
984 printk(KERN_WARNING "VPE loader: "
985 "program does not contain vpe_shared symbol.\n"
986 " Unable to use AMVP (AP/SP) facilities.\n");
989 printk(" elf loaded\n");
990 return 0;
993 static void cleanup_tc(struct tc *tc)
995 unsigned long flags;
996 unsigned int mtflags, vpflags;
997 int tmp;
999 local_irq_save(flags);
1000 mtflags = dmt();
1001 vpflags = dvpe();
1002 /* Put MVPE's into 'configuration state' */
1003 set_c0_mvpcontrol(MVPCONTROL_VPC);
1005 settc(tc->index);
1006 tmp = read_tc_c0_tcstatus();
1008 /* mark not allocated and not dynamically allocatable */
1009 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1010 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1011 write_tc_c0_tcstatus(tmp);
1013 write_tc_c0_tchalt(TCHALT_H);
1014 mips_ihb();
1016 /* bind it to anything other than VPE1 */
1017 // write_tc_c0_tcbind(read_tc_c0_tcbind() & ~TCBIND_CURVPE); // | TCBIND_CURVPE
1019 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1020 evpe(vpflags);
1021 emt(mtflags);
1022 local_irq_restore(flags);
1025 static int getcwd(char *buff, int size)
1027 mm_segment_t old_fs;
1028 int ret;
1030 old_fs = get_fs();
1031 set_fs(KERNEL_DS);
1033 ret = sys_getcwd(buff, size);
1035 set_fs(old_fs);
1037 return ret;
1040 /* checks VPE is unused and gets ready to load program */
1041 static int vpe_open(struct inode *inode, struct file *filp)
1043 enum vpe_state state;
1044 struct vpe_notifications *not;
1045 struct vpe *v;
1046 int ret;
1048 if (minor != iminor(inode)) {
1049 /* assume only 1 device at the moment. */
1050 printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
1051 return -ENODEV;
1054 if ((v = get_vpe(tclimit)) == NULL) {
1055 printk(KERN_WARNING "VPE loader: unable to get vpe\n");
1056 return -ENODEV;
1059 state = xchg(&v->state, VPE_STATE_INUSE);
1060 if (state != VPE_STATE_UNUSED) {
1061 printk(KERN_DEBUG "VPE loader: tc in use dumping regs\n");
1063 list_for_each_entry(not, &v->notify, list) {
1064 not->stop(tclimit);
1067 release_progmem(v->load_addr);
1068 cleanup_tc(get_tc(tclimit));
1071 /* this of-course trashes what was there before... */
1072 v->pbuffer = vmalloc(P_SIZE);
1073 v->plen = P_SIZE;
1074 v->load_addr = NULL;
1075 v->len = 0;
1077 v->uid = filp->f_uid;
1078 v->gid = filp->f_gid;
1080 #ifdef CONFIG_MIPS_APSP_KSPD
1081 /* get kspd to tell us when a syscall_exit happens */
1082 if (!kspd_events_reqd) {
1083 kspd_notify(&kspd_events);
1084 kspd_events_reqd++;
1086 #endif
1088 v->cwd[0] = 0;
1089 ret = getcwd(v->cwd, VPE_PATH_MAX);
1090 if (ret < 0)
1091 printk(KERN_WARNING "VPE loader: open, getcwd returned %d\n", ret);
1093 v->shared_ptr = NULL;
1094 v->__start = 0;
1096 return 0;
1099 static int vpe_release(struct inode *inode, struct file *filp)
1101 struct vpe *v;
1102 Elf_Ehdr *hdr;
1103 int ret = 0;
1105 v = get_vpe(tclimit);
1106 if (v == NULL)
1107 return -ENODEV;
1109 hdr = (Elf_Ehdr *) v->pbuffer;
1110 if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
1111 if (vpe_elfload(v) >= 0) {
1112 vpe_run(v);
1113 } else {
1114 printk(KERN_WARNING "VPE loader: ELF load failed.\n");
1115 ret = -ENOEXEC;
1117 } else {
1118 printk(KERN_WARNING "VPE loader: only elf files are supported\n");
1119 ret = -ENOEXEC;
1122 /* It's good to be able to run the SP and if it chokes have a look at
1123 the /dev/rt?. But if we reset the pointer to the shared struct we
1124 loose what has happened. So perhaps if garbage is sent to the vpe
1125 device, use it as a trigger for the reset. Hopefully a nice
1126 executable will be along shortly. */
1127 if (ret < 0)
1128 v->shared_ptr = NULL;
1130 // cleanup any temp buffers
1131 if (v->pbuffer)
1132 vfree(v->pbuffer);
1133 v->plen = 0;
1134 return ret;
1137 static ssize_t vpe_write(struct file *file, const char __user * buffer,
1138 size_t count, loff_t * ppos)
1140 size_t ret = count;
1141 struct vpe *v;
1143 if (iminor(file->f_path.dentry->d_inode) != minor)
1144 return -ENODEV;
1146 v = get_vpe(tclimit);
1147 if (v == NULL)
1148 return -ENODEV;
1150 if (v->pbuffer == NULL) {
1151 printk(KERN_ERR "VPE loader: no buffer for program\n");
1152 return -ENOMEM;
1155 if ((count + v->len) > v->plen) {
1156 printk(KERN_WARNING
1157 "VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
1158 return -ENOMEM;
1161 count -= copy_from_user(v->pbuffer + v->len, buffer, count);
1162 if (!count)
1163 return -EFAULT;
1165 v->len += count;
1166 return ret;
1169 static const struct file_operations vpe_fops = {
1170 .owner = THIS_MODULE,
1171 .open = vpe_open,
1172 .release = vpe_release,
1173 .write = vpe_write
1176 /* module wrapper entry points */
1177 /* give me a vpe */
1178 vpe_handle vpe_alloc(void)
1180 int i;
1181 struct vpe *v;
1183 /* find a vpe */
1184 for (i = 1; i < MAX_VPES; i++) {
1185 if ((v = get_vpe(i)) != NULL) {
1186 v->state = VPE_STATE_INUSE;
1187 return v;
1190 return NULL;
1193 EXPORT_SYMBOL(vpe_alloc);
1195 /* start running from here */
1196 int vpe_start(vpe_handle vpe, unsigned long start)
1198 struct vpe *v = vpe;
1200 v->__start = start;
1201 return vpe_run(v);
1204 EXPORT_SYMBOL(vpe_start);
1206 /* halt it for now */
1207 int vpe_stop(vpe_handle vpe)
1209 struct vpe *v = vpe;
1210 struct tc *t;
1211 unsigned int evpe_flags;
1213 evpe_flags = dvpe();
1215 if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) {
1217 settc(t->index);
1218 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1221 evpe(evpe_flags);
1223 return 0;
1226 EXPORT_SYMBOL(vpe_stop);
1228 /* I've done with it thank you */
1229 int vpe_free(vpe_handle vpe)
1231 struct vpe *v = vpe;
1232 struct tc *t;
1233 unsigned int evpe_flags;
1235 if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
1236 return -ENOEXEC;
1239 evpe_flags = dvpe();
1241 /* Put MVPE's into 'configuration state' */
1242 set_c0_mvpcontrol(MVPCONTROL_VPC);
1244 settc(t->index);
1245 write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA);
1247 /* halt the TC */
1248 write_tc_c0_tchalt(TCHALT_H);
1249 mips_ihb();
1251 /* mark the TC unallocated */
1252 write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A);
1254 v->state = VPE_STATE_UNUSED;
1256 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1257 evpe(evpe_flags);
1259 return 0;
1262 EXPORT_SYMBOL(vpe_free);
1264 void *vpe_get_shared(int index)
1266 struct vpe *v;
1268 if ((v = get_vpe(index)) == NULL)
1269 return NULL;
1271 return v->shared_ptr;
1274 EXPORT_SYMBOL(vpe_get_shared);
1276 int vpe_getuid(int index)
1278 struct vpe *v;
1280 if ((v = get_vpe(index)) == NULL)
1281 return -1;
1283 return v->uid;
1286 EXPORT_SYMBOL(vpe_getuid);
1288 int vpe_getgid(int index)
1290 struct vpe *v;
1292 if ((v = get_vpe(index)) == NULL)
1293 return -1;
1295 return v->gid;
1298 EXPORT_SYMBOL(vpe_getgid);
1300 int vpe_notify(int index, struct vpe_notifications *notify)
1302 struct vpe *v;
1304 if ((v = get_vpe(index)) == NULL)
1305 return -1;
1307 list_add(&notify->list, &v->notify);
1308 return 0;
1311 EXPORT_SYMBOL(vpe_notify);
1313 char *vpe_getcwd(int index)
1315 struct vpe *v;
1317 if ((v = get_vpe(index)) == NULL)
1318 return NULL;
1320 return v->cwd;
1323 EXPORT_SYMBOL(vpe_getcwd);
1325 #ifdef CONFIG_MIPS_APSP_KSPD
1326 static void kspd_sp_exit( int sp_id)
1328 cleanup_tc(get_tc(sp_id));
1330 #endif
1332 static ssize_t store_kill(struct device *dev, struct device_attribute *attr,
1333 const char *buf, size_t len)
1335 struct vpe *vpe = get_vpe(tclimit);
1336 struct vpe_notifications *not;
1338 list_for_each_entry(not, &vpe->notify, list) {
1339 not->stop(tclimit);
1342 release_progmem(vpe->load_addr);
1343 cleanup_tc(get_tc(tclimit));
1344 vpe_stop(vpe);
1345 vpe_free(vpe);
1347 return len;
1350 static ssize_t show_ntcs(struct device *cd, struct device_attribute *attr,
1351 char *buf)
1353 struct vpe *vpe = get_vpe(tclimit);
1355 return sprintf(buf, "%d\n", vpe->ntcs);
1358 static ssize_t store_ntcs(struct device *dev, struct device_attribute *attr,
1359 const char *buf, size_t len)
1361 struct vpe *vpe = get_vpe(tclimit);
1362 unsigned long new;
1363 char *endp;
1365 new = simple_strtoul(buf, &endp, 0);
1366 if (endp == buf)
1367 goto out_einval;
1369 if (new == 0 || new > (hw_tcs - tclimit))
1370 goto out_einval;
1372 vpe->ntcs = new;
1374 return len;
1376 out_einval:
1377 return -EINVAL;;
1380 static struct device_attribute vpe_class_attributes[] = {
1381 __ATTR(kill, S_IWUSR, NULL, store_kill),
1382 __ATTR(ntcs, S_IRUGO | S_IWUSR, show_ntcs, store_ntcs),
1386 static void vpe_device_release(struct device *cd)
1388 kfree(cd);
1391 struct class vpe_class = {
1392 .name = "vpe",
1393 .owner = THIS_MODULE,
1394 .dev_release = vpe_device_release,
1395 .dev_attrs = vpe_class_attributes,
1398 struct device vpe_device;
1400 static int __init vpe_module_init(void)
1402 unsigned int mtflags, vpflags;
1403 unsigned long flags, val;
1404 struct vpe *v = NULL;
1405 struct tc *t;
1406 int tc, err;
1408 if (!cpu_has_mipsmt) {
1409 printk("VPE loader: not a MIPS MT capable processor\n");
1410 return -ENODEV;
1413 if (vpelimit == 0) {
1414 printk(KERN_WARNING "No VPEs reserved for AP/SP, not "
1415 "initializing VPE loader.\nPass maxvpes=<n> argument as "
1416 "kernel argument\n");
1418 return -ENODEV;
1421 if (tclimit == 0) {
1422 printk(KERN_WARNING "No TCs reserved for AP/SP, not "
1423 "initializing VPE loader.\nPass maxtcs=<n> argument as "
1424 "kernel argument\n");
1426 return -ENODEV;
1429 major = register_chrdev(0, module_name, &vpe_fops);
1430 if (major < 0) {
1431 printk("VPE loader: unable to register character device\n");
1432 return major;
1435 err = class_register(&vpe_class);
1436 if (err) {
1437 printk(KERN_ERR "vpe_class registration failed\n");
1438 goto out_chrdev;
1441 device_initialize(&vpe_device);
1442 vpe_device.class = &vpe_class,
1443 vpe_device.parent = NULL,
1444 strlcpy(vpe_device.bus_id, "vpe1", BUS_ID_SIZE);
1445 vpe_device.devt = MKDEV(major, minor);
1446 err = device_add(&vpe_device);
1447 if (err) {
1448 printk(KERN_ERR "Adding vpe_device failed\n");
1449 goto out_class;
1452 local_irq_save(flags);
1453 mtflags = dmt();
1454 vpflags = dvpe();
1456 /* Put MVPE's into 'configuration state' */
1457 set_c0_mvpcontrol(MVPCONTROL_VPC);
1459 /* dump_mtregs(); */
1461 val = read_c0_mvpconf0();
1462 hw_tcs = (val & MVPCONF0_PTC) + 1;
1463 hw_vpes = ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1;
1465 for (tc = tclimit; tc < hw_tcs; tc++) {
1467 * Must re-enable multithreading temporarily or in case we
1468 * reschedule send IPIs or similar we might hang.
1470 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1471 evpe(vpflags);
1472 emt(mtflags);
1473 local_irq_restore(flags);
1474 t = alloc_tc(tc);
1475 if (!t) {
1476 err = -ENOMEM;
1477 goto out;
1480 local_irq_save(flags);
1481 mtflags = dmt();
1482 vpflags = dvpe();
1483 set_c0_mvpcontrol(MVPCONTROL_VPC);
1485 /* VPE's */
1486 if (tc < hw_tcs) {
1487 settc(tc);
1489 if ((v = alloc_vpe(tc)) == NULL) {
1490 printk(KERN_WARNING "VPE: unable to allocate VPE\n");
1492 goto out_reenable;
1495 v->ntcs = hw_tcs - tclimit;
1497 /* add the tc to the list of this vpe's tc's. */
1498 list_add(&t->tc, &v->tc);
1500 /* deactivate all but vpe0 */
1501 if (tc >= tclimit) {
1502 unsigned long tmp = read_vpe_c0_vpeconf0();
1504 tmp &= ~VPECONF0_VPA;
1506 /* master VPE */
1507 tmp |= VPECONF0_MVP;
1508 write_vpe_c0_vpeconf0(tmp);
1511 /* disable multi-threading with TC's */
1512 write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE);
1514 if (tc >= vpelimit) {
1516 * Set config to be the same as vpe0,
1517 * particularly kseg0 coherency alg
1519 write_vpe_c0_config(read_c0_config());
1523 /* TC's */
1524 t->pvpe = v; /* set the parent vpe */
1526 if (tc >= tclimit) {
1527 unsigned long tmp;
1529 settc(tc);
1531 /* Any TC that is bound to VPE0 gets left as is - in case
1532 we are running SMTC on VPE0. A TC that is bound to any
1533 other VPE gets bound to VPE0, ideally I'd like to make
1534 it homeless but it doesn't appear to let me bind a TC
1535 to a non-existent VPE. Which is perfectly reasonable.
1537 The (un)bound state is visible to an EJTAG probe so may
1538 notify GDB...
1541 if (((tmp = read_tc_c0_tcbind()) & TCBIND_CURVPE)) {
1542 /* tc is bound >vpe0 */
1543 write_tc_c0_tcbind(tmp & ~TCBIND_CURVPE);
1545 t->pvpe = get_vpe(0); /* set the parent vpe */
1548 /* halt the TC */
1549 write_tc_c0_tchalt(TCHALT_H);
1550 mips_ihb();
1552 tmp = read_tc_c0_tcstatus();
1554 /* mark not activated and not dynamically allocatable */
1555 tmp &= ~(TCSTATUS_A | TCSTATUS_DA);
1556 tmp |= TCSTATUS_IXMT; /* interrupt exempt */
1557 write_tc_c0_tcstatus(tmp);
1561 out_reenable:
1562 /* release config state */
1563 clear_c0_mvpcontrol(MVPCONTROL_VPC);
1565 evpe(vpflags);
1566 emt(mtflags);
1567 local_irq_restore(flags);
1569 #ifdef CONFIG_MIPS_APSP_KSPD
1570 kspd_events.kspd_sp_exit = kspd_sp_exit;
1571 #endif
1572 return 0;
1574 out_class:
1575 class_unregister(&vpe_class);
1576 out_chrdev:
1577 unregister_chrdev(major, module_name);
1579 out:
1580 return err;
1583 static void __exit vpe_module_exit(void)
1585 struct vpe *v, *n;
1587 list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
1588 if (v->state != VPE_STATE_UNUSED) {
1589 release_vpe(v);
1593 device_del(&vpe_device);
1594 unregister_chrdev(major, module_name);
1597 module_init(vpe_module_init);
1598 module_exit(vpe_module_exit);
1599 MODULE_DESCRIPTION("MIPS VPE Loader");
1600 MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
1601 MODULE_LICENSE("GPL");