arch/m68knommu/platform/coldfire/timers.c

   1 /***************************************************************************/
   2
   3 /*
   4  *      timers.c -- generic ColdFire hardware timer support.
   5  *
   6  *      Copyright (C) 1999-2008, Greg Ungerer <gerg@snapgear.com>
   7  */
   8
   9 /***************************************************************************/
  10
  11 #include <linux/kernel.h>
  12 #include <linux/init.h>
  13 #include <linux/sched.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/irq.h>
  16 #include <linux/profile.h>
  17 #include <linux/clocksource.h>
  18 #include <asm/io.h>
  19 #include <asm/traps.h>
  20 #include <asm/machdep.h>
  21 #include <asm/coldfire.h>
  22 #include <asm/mcftimer.h>
  23 #include <asm/mcfsim.h>
  24
  25 /***************************************************************************/
  26
  27 /*
  28  *      By default use timer1 as the system clock timer.
  29  */
  30 #define FREQ    (MCF_BUSCLK / 16)
  31 #define TA(a)   (MCF_MBAR + MCFTIMER_BASE1 + (a))
  32
  33 /*
  34  *      Default the timer and vector to use for ColdFire. Some ColdFire
  35  *      CPU's and some boards may want different. Their sub-architecture
  36  *      startup code (in config.c) can change these if they want.
  37  */
  38 unsigned int    mcf_timervector = 29;
  39 unsigned int    mcf_profilevector = 31;
  40 unsigned int    mcf_timerlevel = 5;
  41
  42 /*
  43  *      These provide the underlying interrupt vector support.
  44  *      Unfortunately it is a little different on each ColdFire.
  45  */
  46 extern void mcf_settimericr(int timer, int level);
  47 void coldfire_profile_init(void);
  48
  49 #if defined(CONFIG_M532x)
  50 #define __raw_readtrr   __raw_readl
  51 #define __raw_writetrr  __raw_writel
  52 #else
  53 #define __raw_readtrr   __raw_readw
  54 #define __raw_writetrr  __raw_writew
  55 #endif
  56
  57 static u32 mcftmr_cycles_per_jiffy;
  58 static u32 mcftmr_cnt;
  59
  60 /***************************************************************************/
  61
  62 static irqreturn_t mcftmr_tick(int irq, void *dummy)
  63 {
  64         /* Reset the ColdFire timer */
  65         __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER));
  66
  67         mcftmr_cnt += mcftmr_cycles_per_jiffy;
  68         return arch_timer_interrupt(irq, dummy);
  69 }
  70
  71 /***************************************************************************/
  72
  73 static struct irqaction mcftmr_timer_irq = {
  74         .name    = "timer",
  75         .flags   = IRQF_DISABLED | IRQF_TIMER,
  76         .handler = mcftmr_tick,
  77 };
  78
  79 /***************************************************************************/
  80
  81 static cycle_t mcftmr_read_clk(void)
  82 {
  83         unsigned long flags;
  84         u32 cycles;
  85         u16 tcn;
  86
  87         local_irq_save(flags);
  88         tcn = __raw_readw(TA(MCFTIMER_TCN));
  89         cycles = mcftmr_cnt;
  90         local_irq_restore(flags);
  91
  92         return cycles + tcn;
  93 }
  94
  95 /***************************************************************************/
  96
  97 static struct clocksource mcftmr_clk = {
  98         .name   = "tmr",
  99         .rating = 250,
 100         .read   = mcftmr_read_clk,
 101         .shift  = 20,
 102         .mask   = CLOCKSOURCE_MASK(32),
 103         .flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 104 };
 105
 106 /***************************************************************************/
 107
 108 void hw_timer_init(void)
 109 {
 110         setup_irq(mcf_timervector, &mcftmr_timer_irq);
 111
 112         __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
 113         mcftmr_cycles_per_jiffy = FREQ / HZ;
 114         __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
 115         __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 116                 MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
 117
 118         mcftmr_clk.mult = clocksource_hz2mult(FREQ, mcftmr_clk.shift);
 119         clocksource_register(&mcftmr_clk);
 120
 121         mcf_settimericr(1, mcf_timerlevel);
 122
 123 #ifdef CONFIG_HIGHPROFILE
 124         coldfire_profile_init();
 125 #endif
 126 }
 127
 128 /***************************************************************************/
 129 #ifdef CONFIG_HIGHPROFILE
 130 /***************************************************************************/
 131
 132 /*
 133  *      By default use timer2 as the profiler clock timer.
 134  */
 135 #define PA(a)   (MCF_MBAR + MCFTIMER_BASE2 + (a))
 136
 137 /*
 138  *      Choose a reasonably fast profile timer. Make it an odd value to
 139  *      try and get good coverage of kernel operations.
 140  */
 141 #define PROFILEHZ       1013
 142
 143 /*
 144  *      Use the other timer to provide high accuracy profiling info.
 145  */
 146 irqreturn_t coldfire_profile_tick(int irq, void *dummy)
 147 {
 148         /* Reset ColdFire timer2 */
 149         __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, PA(MCFTIMER_TER));
 150         if (current->pid)
 151                 profile_tick(CPU_PROFILING);
 152         return IRQ_HANDLED;
 153 }
 154
 155 /***************************************************************************/
 156
 157 static struct irqaction coldfire_profile_irq = {
 158         .name    = "profile timer",
 159         .flags   = IRQF_DISABLED | IRQF_TIMER,
 160         .handler = coldfire_profile_tick,
 161 };
 162
 163 void coldfire_profile_init(void)
 164 {
 165         printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
 166                PROFILEHZ);
 167
 168         setup_irq(mcf_profilevector, &coldfire_profile_irq);
 169
 170         /* Set up TIMER 2 as high speed profile clock */
 171         __raw_writew(MCFTIMER_TMR_DISABLE, PA(MCFTIMER_TMR));
 172
 173         __raw_writetrr(((MCF_BUSCLK / 16) / PROFILEHZ), PA(MCFTIMER_TRR));
 174         __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
 175                 MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, PA(MCFTIMER_TMR));
 176
 177         mcf_settimericr(2, 7);
 178 }
 179
 180 /***************************************************************************/
 181 #endif  /* CONFIG_HIGHPROFILE */
 182 /***************************************************************************/