arch/cris/arch-v32/mach-fs/arbiter.c

   1 /*
   2  * Memory arbiter functions. Allocates bandwidth through the
   3  * arbiter and sets up arbiter breakpoints.
   4  *
   5  * The algorithm first assigns slots to the clients that has specified
   6  * bandwidth (e.g. ethernet) and then the remaining slots are divided
   7  * on all the active clients.
   8  *
   9  * Copyright (c) 2004-2007 Axis Communications AB.
  10  */
  11
  12 #include <hwregs/reg_map.h>
  13 #include <hwregs/reg_rdwr.h>
  14 #include <hwregs/marb_defs.h>
  15 #include <arbiter.h>
  16 #include <hwregs/intr_vect.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/signal.h>
  19 #include <linux/errno.h>
  20 #include <linux/spinlock.h>
  21 #include <asm/io.h>
  22 #include <asm/irq_regs.h>
  23
  24 struct crisv32_watch_entry {
  25         unsigned long instance;
  26         watch_callback *cb;
  27         unsigned long start;
  28         unsigned long end;
  29         int used;
  30 };
  31
  32 #define NUMBER_OF_BP 4
  33 #define NBR_OF_CLIENTS 14
  34 #define NBR_OF_SLOTS 64
  35 #define SDRAM_BANDWIDTH 100000000       /* Some kind of expected value */
  36 #define INTMEM_BANDWIDTH 400000000
  37 #define NBR_OF_REGIONS 2
  38
  39 static struct crisv32_watch_entry watches[NUMBER_OF_BP] = {
  40         {regi_marb_bp0},
  41         {regi_marb_bp1},
  42         {regi_marb_bp2},
  43         {regi_marb_bp3}
  44 };
  45
  46 static u8 requested_slots[NBR_OF_REGIONS][NBR_OF_CLIENTS];
  47 static u8 active_clients[NBR_OF_REGIONS][NBR_OF_CLIENTS];
  48 static int max_bandwidth[NBR_OF_REGIONS] =
  49     { SDRAM_BANDWIDTH, INTMEM_BANDWIDTH };
  50
  51 DEFINE_SPINLOCK(arbiter_lock);
  52
  53 static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id);
  54
  55 /*
  56  * "I'm the arbiter, I know the score.
  57  *  From square one I'll be watching all 64."
  58  * (memory arbiter slots, that is)
  59  *
  60  *  Or in other words:
  61  * Program the memory arbiter slots for "region" according to what's
  62  * in requested_slots[] and active_clients[], while minimizing
  63  * latency. A caller may pass a non-zero positive amount for
  64  * "unused_slots", which must then be the unallocated, remaining
  65  * number of slots, free to hand out to any client.
  66  */
  67
  68 static void crisv32_arbiter_config(int region, int unused_slots)
  69 {
  70         int slot;
  71         int client;
  72         int interval = 0;
  73
  74         /*
  75          * This vector corresponds to the hardware arbiter slots (see
  76          * the hardware documentation for semantics). We initialize
  77          * each slot with a suitable sentinel value outside the valid
  78          * range {0 .. NBR_OF_CLIENTS - 1} and replace them with
  79          * client indexes. Then it's fed to the hardware.
  80          */
  81         s8 val[NBR_OF_SLOTS];
  82
  83         for (slot = 0; slot < NBR_OF_SLOTS; slot++)
  84                 val[slot] = -1;
  85
  86         for (client = 0; client < NBR_OF_CLIENTS; client++) {
  87                 int pos;
  88                 /* Allocate the requested non-zero number of slots, but
  89                  * also give clients with zero-requests one slot each
  90                  * while stocks last. We do the latter here, in client
  91                  * order. This makes sure zero-request clients are the
  92                  * first to get to any spare slots, else those slots
  93                  * could, when bandwidth is allocated close to the limit,
  94                  * all be allocated to low-index non-zero-request clients
  95                  * in the default-fill loop below. Another positive but
  96                  * secondary effect is a somewhat better spread of the
  97                  * zero-bandwidth clients in the vector, avoiding some of
  98                  * the latency that could otherwise be caused by the
  99                  * partitioning of non-zero-bandwidth clients at low
 100                  * indexes and zero-bandwidth clients at high
 101                  * indexes. (Note that this spreading can only affect the
 102                  * unallocated bandwidth.)  All the above only matters for
 103                  * memory-intensive situations, of course.
 104                  */
 105                 if (!requested_slots[region][client]) {
 106                         /*
 107                          * Skip inactive clients. Also skip zero-slot
 108                          * allocations in this pass when there are no known
 109                          * free slots.
 110                          */
 111                         if (!active_clients[region][client]
 112                             || unused_slots <= 0)
 113                                 continue;
 114
 115                         unused_slots--;
 116
 117                         /* Only allocate one slot for this client. */
 118                         interval = NBR_OF_SLOTS;
 119                 } else
 120                         interval =
 121                             NBR_OF_SLOTS / requested_slots[region][client];
 122
 123                 pos = 0;
 124                 while (pos < NBR_OF_SLOTS) {
 125                         if (val[pos] >= 0)
 126                                 pos++;
 127                         else {
 128                                 val[pos] = client;
 129                                 pos += interval;
 130                         }
 131                 }
 132         }
 133
 134         client = 0;
 135         for (slot = 0; slot < NBR_OF_SLOTS; slot++) {
 136                 /*
 137                  * Allocate remaining slots in round-robin
 138                  * client-number order for active clients. For this
 139                  * pass, we ignore requested bandwidth and previous
 140                  * allocations.
 141                  */
 142                 if (val[slot] < 0) {
 143                         int first = client;
 144                         while (!active_clients[region][client]) {
 145                                 client = (client + 1) % NBR_OF_CLIENTS;
 146                                 if (client == first)
 147                                         break;
 148                         }
 149                         val[slot] = client;
 150                         client = (client + 1) % NBR_OF_CLIENTS;
 151                 }
 152                 if (region == EXT_REGION)
 153                         REG_WR_INT_VECT(marb, regi_marb, rw_ext_slots, slot,
 154                                         val[slot]);
 155                 else if (region == INT_REGION)
 156                         REG_WR_INT_VECT(marb, regi_marb, rw_int_slots, slot,
 157                                         val[slot]);
 158         }
 159 }
 160
 161 extern char _stext, _etext;
 162
 163 static void crisv32_arbiter_init(void)
 164 {
 165         static int initialized;
 166
 167         if (initialized)
 168                 return;
 169
 170         initialized = 1;
 171
 172         /*
 173          * CPU caches are always set to active, but with zero
 174          * bandwidth allocated. It should be ok to allocate zero
 175          * bandwidth for the caches, because DMA for other channels
 176          * will supposedly finish, once their programmed amount is
 177          * done, and then the caches will get access according to the
 178          * "fixed scheme" for unclaimed slots. Though, if for some
 179          * use-case somewhere, there's a maximum CPU latency for
 180          * e.g. some interrupt, we have to start allocating specific
 181          * bandwidth for the CPU caches too.
 182          */
 183         active_clients[EXT_REGION][10] = active_clients[EXT_REGION][11] = 1;
 184         crisv32_arbiter_config(EXT_REGION, 0);
 185         crisv32_arbiter_config(INT_REGION, 0);
 186
 187         if (request_irq(MEMARB_INTR_VECT, crisv32_arbiter_irq, IRQF_DISABLED,
 188                         "arbiter", NULL))
 189                 printk(KERN_ERR "Couldn't allocate arbiter IRQ\n");
 190
 191 #ifndef CONFIG_ETRAX_KGDB
 192         /* Global watch for writes to kernel text segment. */
 193         crisv32_arbiter_watch(virt_to_phys(&_stext), &_etext - &_stext,
 194                               arbiter_all_clients, arbiter_all_write, NULL);
 195 #endif
 196 }
 197
 198 /* Main entry for bandwidth allocation. */
 199
 200 int crisv32_arbiter_allocate_bandwidth(int client, int region,
 201                                        unsigned long bandwidth)
 202 {
 203         int i;
 204         int total_assigned = 0;
 205         int total_clients = 0;
 206         int req;
 207
 208         crisv32_arbiter_init();
 209
 210         for (i = 0; i < NBR_OF_CLIENTS; i++) {
 211                 total_assigned += requested_slots[region][i];
 212                 total_clients += active_clients[region][i];
 213         }
 214
 215         /* Avoid division by 0 for 0-bandwidth requests. */
 216         req = bandwidth == 0
 217             ? 0 : NBR_OF_SLOTS / (max_bandwidth[region] / bandwidth);
 218
 219         /*
 220          * We make sure that there are enough slots only for non-zero
 221          * requests. Requesting 0 bandwidth *may* allocate slots,
 222          * though if all bandwidth is allocated, such a client won't
 223          * get any and will have to rely on getting memory access
 224          * according to the fixed scheme that's the default when one
 225          * of the slot-allocated clients doesn't claim their slot.
 226          */
 227         if (total_assigned + req > NBR_OF_SLOTS)
 228                 return -ENOMEM;
 229
 230         active_clients[region][client] = 1;
 231         requested_slots[region][client] = req;
 232         crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned);
 233
 234         return 0;
 235 }
 236
 237 /*
 238  * Main entry for bandwidth deallocation.
 239  *
 240  * Strictly speaking, for a somewhat constant set of clients where
 241  * each client gets a constant bandwidth and is just enabled or
 242  * disabled (somewhat dynamically), no action is necessary here to
 243  * avoid starvation for non-zero-allocation clients, as the allocated
 244  * slots will just be unused. However, handing out those unused slots
 245  * to active clients avoids needless latency if the "fixed scheme"
 246  * would give unclaimed slots to an eager low-index client.
 247  */
 248
 249 void crisv32_arbiter_deallocate_bandwidth(int client, int region)
 250 {
 251         int i;
 252         int total_assigned = 0;
 253
 254         requested_slots[region][client] = 0;
 255         active_clients[region][client] = 0;
 256
 257         for (i = 0; i < NBR_OF_CLIENTS; i++)
 258                 total_assigned += requested_slots[region][i];
 259
 260         crisv32_arbiter_config(region, NBR_OF_SLOTS - total_assigned);
 261 }
 262
 263 int crisv32_arbiter_watch(unsigned long start, unsigned long size,
 264                           unsigned long clients, unsigned long accesses,
 265                           watch_callback *cb)
 266 {
 267         int i;
 268
 269         crisv32_arbiter_init();
 270
 271         if (start > 0x80000000) {
 272                 printk(KERN_ERR "Arbiter: %lX doesn't look like a "
 273                         "physical address", start);
 274                 return -EFAULT;
 275         }
 276
 277         spin_lock(&arbiter_lock);
 278
 279         for (i = 0; i < NUMBER_OF_BP; i++) {
 280                 if (!watches[i].used) {
 281                         reg_marb_rw_intr_mask intr_mask =
 282                             REG_RD(marb, regi_marb, rw_intr_mask);
 283
 284                         watches[i].used = 1;
 285                         watches[i].start = start;
 286                         watches[i].end = start + size;
 287                         watches[i].cb = cb;
 288
 289                         REG_WR_INT(marb_bp, watches[i].instance, rw_first_addr,
 290                                    watches[i].start);
 291                         REG_WR_INT(marb_bp, watches[i].instance, rw_last_addr,
 292                                    watches[i].end);
 293                         REG_WR_INT(marb_bp, watches[i].instance, rw_op,
 294                                    accesses);
 295                         REG_WR_INT(marb_bp, watches[i].instance, rw_clients,
 296                                    clients);
 297
 298                         if (i == 0)
 299                                 intr_mask.bp0 = regk_marb_yes;
 300                         else if (i == 1)
 301                                 intr_mask.bp1 = regk_marb_yes;
 302                         else if (i == 2)
 303                                 intr_mask.bp2 = regk_marb_yes;
 304                         else if (i == 3)
 305                                 intr_mask.bp3 = regk_marb_yes;
 306
 307                         REG_WR(marb, regi_marb, rw_intr_mask, intr_mask);
 308                         spin_unlock(&arbiter_lock);
 309
 310                         return i;
 311                 }
 312         }
 313         spin_unlock(&arbiter_lock);
 314         return -ENOMEM;
 315 }
 316
 317 int crisv32_arbiter_unwatch(int id)
 318 {
 319         reg_marb_rw_intr_mask intr_mask = REG_RD(marb, regi_marb, rw_intr_mask);
 320
 321         crisv32_arbiter_init();
 322
 323         spin_lock(&arbiter_lock);
 324
 325         if ((id < 0) || (id >= NUMBER_OF_BP) || (!watches[id].used)) {
 326                 spin_unlock(&arbiter_lock);
 327                 return -EINVAL;
 328         }
 329
 330         memset(&watches[id], 0, sizeof(struct crisv32_watch_entry));
 331
 332         if (id == 0)
 333                 intr_mask.bp0 = regk_marb_no;
 334         else if (id == 1)
 335                 intr_mask.bp2 = regk_marb_no;
 336         else if (id == 2)
 337                 intr_mask.bp2 = regk_marb_no;
 338         else if (id == 3)
 339                 intr_mask.bp3 = regk_marb_no;
 340
 341         REG_WR(marb, regi_marb, rw_intr_mask, intr_mask);
 342
 343         spin_unlock(&arbiter_lock);
 344         return 0;
 345 }
 346
 347 extern void show_registers(struct pt_regs *regs);
 348
 349 static irqreturn_t crisv32_arbiter_irq(int irq, void *dev_id)
 350 {
 351         reg_marb_r_masked_intr masked_intr =
 352             REG_RD(marb, regi_marb, r_masked_intr);
 353         reg_marb_bp_r_brk_clients r_clients;
 354         reg_marb_bp_r_brk_addr r_addr;
 355         reg_marb_bp_r_brk_op r_op;
 356         reg_marb_bp_r_brk_first_client r_first;
 357         reg_marb_bp_r_brk_size r_size;
 358         reg_marb_bp_rw_ack ack = { 0 };
 359         reg_marb_rw_ack_intr ack_intr = {
 360                 .bp0 = 1, .bp1 = 1, .bp2 = 1, .bp3 = 1
 361         };
 362         struct crisv32_watch_entry *watch;
 363
 364         if (masked_intr.bp0) {
 365                 watch = &watches[0];
 366                 ack_intr.bp0 = regk_marb_yes;
 367         } else if (masked_intr.bp1) {
 368                 watch = &watches[1];
 369                 ack_intr.bp1 = regk_marb_yes;
 370         } else if (masked_intr.bp2) {
 371                 watch = &watches[2];
 372                 ack_intr.bp2 = regk_marb_yes;
 373         } else if (masked_intr.bp3) {
 374                 watch = &watches[3];
 375                 ack_intr.bp3 = regk_marb_yes;
 376         } else {
 377                 return IRQ_NONE;
 378         }
 379
 380         /* Retrieve all useful information and print it. */
 381         r_clients = REG_RD(marb_bp, watch->instance, r_brk_clients);
 382         r_addr = REG_RD(marb_bp, watch->instance, r_brk_addr);
 383         r_op = REG_RD(marb_bp, watch->instance, r_brk_op);
 384         r_first = REG_RD(marb_bp, watch->instance, r_brk_first_client);
 385         r_size = REG_RD(marb_bp, watch->instance, r_brk_size);
 386
 387         printk(KERN_INFO "Arbiter IRQ\n");
 388         printk(KERN_INFO "Clients %X addr %X op %X first %X size %X\n",
 389                REG_TYPE_CONV(int, reg_marb_bp_r_brk_clients, r_clients),
 390                REG_TYPE_CONV(int, reg_marb_bp_r_brk_addr, r_addr),
 391                REG_TYPE_CONV(int, reg_marb_bp_r_brk_op, r_op),
 392                REG_TYPE_CONV(int, reg_marb_bp_r_brk_first_client, r_first),
 393                REG_TYPE_CONV(int, reg_marb_bp_r_brk_size, r_size));
 394
 395         REG_WR(marb_bp, watch->instance, rw_ack, ack);
 396         REG_WR(marb, regi_marb, rw_ack_intr, ack_intr);
 397
 398         printk(KERN_INFO "IRQ occured at %lX\n", get_irq_regs()->erp);
 399
 400         if (watch->cb)
 401                 watch->cb();
 402
 403         return IRQ_HANDLED;
 404 }