arch/arm/mach-pxa/trizeps4.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/trizeps4.c
   3  *
   4  *  Support for the Keith und Koep Trizeps4 Module Platform.
   5  *
   6  *  Author:     Jürgen Schindele
   7  *  Created:    20 02, 2006
   8  *  Copyright:  Jürgen Schindele
   9  *
  10  *  This program is free software; you can redistribute it and/or modify
  11  *  it under the terms of the GNU General Public License version 2 as
  12  *  published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/init.h>
  16 #include <linux/kernel.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/sysdev.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/sched.h>
  21 #include <linux/bitops.h>
  22 #include <linux/fb.h>
  23 #include <linux/ioport.h>
  24 #include <linux/delay.h>
  25 #include <linux/serial_8250.h>
  26 #include <linux/mtd/mtd.h>
  27 #include <linux/mtd/physmap.h>
  28 #include <linux/mtd/partitions.h>
  29
  30 #include <asm/types.h>
  31 #include <asm/setup.h>
  32 #include <asm/memory.h>
  33 #include <asm/mach-types.h>
  34 #include <asm/hardware.h>
  35 #include <asm/irq.h>
  36 #include <asm/sizes.h>
  37
  38 #include <asm/mach/arch.h>
  39 #include <asm/mach/map.h>
  40 #include <asm/mach/irq.h>
  41 #include <asm/mach/flash.h>
  42
  43 #include <asm/arch/pxa-regs.h>
  44 #include <asm/arch/trizeps4.h>
  45 #include <asm/arch/audio.h>
  46 #include <asm/arch/pxafb.h>
  47 #include <asm/arch/mmc.h>
  48 #include <asm/arch/irda.h>
  49 #include <asm/arch/ohci.h>
  50
  51 #include "generic.h"
  52 #include "devices.h"
  53
  54 /********************************************************************************************
  55  * ONBOARD FLASH
  56  ********************************************************************************************/
  57 static struct mtd_partition trizeps4_partitions[] = {
  58         {
  59                 .name =         "Bootloader",
  60                 .offset =       0x00000000,
  61                 .size =         0x00040000,
  62                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
  63         },{
  64                 .name =         "Backup",
  65                 .offset =       0x00040000,
  66                 .size =         0x00040000,
  67         },{
  68                 .name =         "Image",
  69                 .offset =       0x00080000,
  70                 .size =         0x01080000,
  71         },{
  72                 .name =         "IPSM",
  73                 .offset =       0x01100000,
  74                 .size =         0x00e00000,
  75         },{
  76                 .name =         "Registry",
  77                 .offset =       0x01f00000,
  78                 .size =         MTDPART_SIZ_FULL,
  79         }
  80 };
  81
  82 static struct physmap_flash_data trizeps4_flash_data[] = {
  83         {
  84                 .width          = 4,                    /* bankwidth in bytes */
  85                 .parts          = trizeps4_partitions,
  86                 .nr_parts       = ARRAY_SIZE(trizeps4_partitions)
  87         }
  88 };
  89
  90 static struct resource flash_resource = {
  91         .start  = PXA_CS0_PHYS,
  92         .end    = PXA_CS0_PHYS + SZ_32M - 1,
  93         .flags  = IORESOURCE_MEM,
  94 };
  95
  96 static struct platform_device flash_device = {
  97         .name           = "physmap-flash",
  98         .id             = 0,
  99         .dev = {
 100                 .platform_data = trizeps4_flash_data,
 101         },
 102         .resource = &flash_resource,
 103         .num_resources = 1,
 104 };
 105
 106 /********************************************************************************************
 107  * DAVICOM DM9000 Ethernet
 108  ********************************************************************************************/
 109 static struct resource dm9000_resources[] = {
 110         [0] = {
 111                 .start  = TRIZEPS4_ETH_PHYS+0x300,
 112                 .end    = TRIZEPS4_ETH_PHYS+0x400-1,
 113                 .flags  = IORESOURCE_MEM,
 114         },
 115         [1] = {
 116                 .start  = TRIZEPS4_ETH_PHYS+0x8300,
 117                 .end    = TRIZEPS4_ETH_PHYS+0x8400-1,
 118                 .flags  = IORESOURCE_MEM,
 119         },
 120         [2] = {
 121                 .start  = TRIZEPS4_ETH_IRQ,
 122                 .end    = TRIZEPS4_ETH_IRQ,
 123                 .flags  = (IORESOURCE_IRQ | IRQT_RISING),
 124         },
 125 };
 126
 127 static struct platform_device dm9000_device = {
 128         .name           = "dm9000",
 129         .id             = -1,
 130         .num_resources  = ARRAY_SIZE(dm9000_resources),
 131         .resource       = dm9000_resources,
 132 };
 133
 134 /********************************************************************************************
 135  * PXA270 serial ports
 136  ********************************************************************************************/
 137 static struct plat_serial8250_port tri_serial_ports[] = {
 138 #ifdef CONFIG_SERIAL_PXA
 139         /* this uses the own PXA driver */
 140         {
 141                 0,
 142         },
 143 #else
 144         /* this uses the generic 8520 driver */
 145         [0] = {
 146                 .membase        = (void *)&FFUART,
 147                 .irq            = IRQ_FFUART,
 148                 .flags          = UPF_BOOT_AUTOCONF,
 149                 .iotype         = UPIO_MEM32,
 150                 .regshift       = 2,
 151                 .uartclk        = (921600*16),
 152         },
 153         [1] = {
 154                 .membase        = (void *)&BTUART,
 155                 .irq            = IRQ_BTUART,
 156                 .flags          = UPF_BOOT_AUTOCONF,
 157                 .iotype         = UPIO_MEM32,
 158                 .regshift       = 2,
 159                 .uartclk        = (921600*16),
 160         },
 161         {
 162                 0,
 163         },
 164 #endif
 165 };
 166
 167 static struct platform_device uart_devices = {
 168         .name           = "serial8250",
 169         .id             = 0,
 170         .dev            = {
 171                 .platform_data  = tri_serial_ports,
 172         },
 173         .num_resources  = 0,
 174         .resource       = NULL,
 175 };
 176
 177 /********************************************************************************************
 178  * PXA270 ac97 sound codec
 179  ********************************************************************************************/
 180 static struct platform_device ac97_audio_device = {
 181         .name           = "pxa2xx-ac97",
 182         .id             = -1,
 183 };
 184
 185 static struct platform_device * trizeps4_devices[] __initdata = {
 186         &flash_device,
 187         &uart_devices,
 188         &dm9000_device,
 189         &ac97_audio_device,
 190 };
 191
 192 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
 193 static short trizeps_conxs_bcr;
 194
 195 /* PCCARD power switching supports only 3,3V */
 196 void board_pcmcia_power(int power)
 197 {
 198         if (power) {
 199                 /* switch power on, put in reset and enable buffers */
 200                 trizeps_conxs_bcr |= power;
 201                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 202                 trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
 203                 ConXS_BCR = trizeps_conxs_bcr;
 204                 /* wait a little */
 205                 udelay(2000);
 206                 /* take reset away */
 207                 trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
 208                 ConXS_BCR = trizeps_conxs_bcr;
 209                 udelay(2000);
 210         } else {
 211                 /* put in reset */
 212                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
 213                 ConXS_BCR = trizeps_conxs_bcr;
 214                 udelay(1000);
 215                 /* switch power off */
 216                 trizeps_conxs_bcr &= ~(0xf);
 217                 ConXS_BCR = trizeps_conxs_bcr;
 218
 219         }
 220         pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
 221 }
 222
 223 /* backlight power switching for LCD panel */
 224 static void board_backlight_power(int on)
 225 {
 226         if (on) {
 227                 trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
 228         } else {
 229                 trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
 230         }
 231         pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
 232         ConXS_BCR = trizeps_conxs_bcr;
 233 }
 234
 235 /* Powersupply for MMC/SD cardslot */
 236 static void board_mci_power(struct device *dev, unsigned int vdd)
 237 {
 238         struct pxamci_platform_data* p_d = dev->platform_data;
 239
 240         if (( 1 << vdd) & p_d->ocr_mask) {
 241                 pr_debug("%s: on\n", __func__);
 242                 /* FIXME fill in values here */
 243         } else {
 244                 pr_debug("%s: off\n", __func__);
 245                 /* FIXME fill in values here */
 246         }
 247 }
 248
 249 static short trizeps_conxs_ircr;
 250
 251 /* Switch modes and Power for IRDA receiver */
 252 static void board_irda_mode(struct device *dev, int mode)
 253 {
 254         unsigned long flags;
 255
 256         local_irq_save(flags);
 257         if (mode & IR_SIRMODE) {
 258                 /* Slow mode */
 259                 trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
 260         } else if (mode & IR_FIRMODE) {
 261                 /* Fast mode */
 262                 trizeps_conxs_ircr |= ConXS_IRCR_MODE;
 263         }
 264         if (mode & IR_OFF) {
 265                 trizeps_conxs_ircr |= ConXS_IRCR_SD;
 266         } else {
 267                 trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
 268         }
 269         /* FIXME write values to register */
 270         local_irq_restore(flags);
 271 }
 272
 273 #else
 274 /* for other baseboards define dummies */
 275 void board_pcmcia_power(int power)      {;}
 276 #define board_backlight_power           NULL
 277 #define board_mci_power                 NULL
 278 #define board_irda_mode                 NULL
 279
 280 #endif          /* CONFIG_MACH_TRIZEPS4_CONXS */
 281 EXPORT_SYMBOL(board_pcmcia_power);
 282
 283 static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data)
 284 {
 285         int err;
 286         /* setup GPIO for PXA27x MMC controller */
 287         pxa_gpio_mode(GPIO32_MMCCLK_MD);
 288         pxa_gpio_mode(GPIO112_MMCCMD_MD);
 289         pxa_gpio_mode(GPIO92_MMCDAT0_MD);
 290         pxa_gpio_mode(GPIO109_MMCDAT1_MD);
 291         pxa_gpio_mode(GPIO110_MMCDAT2_MD);
 292         pxa_gpio_mode(GPIO111_MMCDAT3_MD);
 293
 294         pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 295
 296         err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
 297                           IRQF_DISABLED | IRQF_TRIGGER_RISING,
 298                           "MMC card detect", data);
 299         if (err)
 300                 printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
 301
 302         return err;
 303 }
 304
 305 static void trizeps4_mci_exit(struct device *dev, void *data)
 306 {
 307         free_irq(TRIZEPS4_MMC_IRQ, data);
 308 }
 309
 310 static struct pxamci_platform_data trizeps4_mci_platform_data = {
 311         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
 312         .init           = trizeps4_mci_init,
 313         .exit           = trizeps4_mci_exit,
 314         .setpower       = board_mci_power,
 315 };
 316
 317 static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
 318         .transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
 319         .transceiver_mode = board_irda_mode,
 320 };
 321
 322 static int trizeps4_ohci_init(struct device *dev)
 323 {
 324         /* setup Port1 GPIO pin. */
 325         pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);  /* USBHPWR1 */
 326         pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
 327
 328         /* Set the Power Control Polarity Low and Power Sense
 329            Polarity Low to active low. */
 330         UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
 331                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
 332
 333         return 0;
 334 }
 335
 336 static void trizeps4_ohci_exit(struct device *dev)
 337 {
 338         ;
 339 }
 340
 341 static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 342         .port_mode      = PMM_PERPORT_MODE,
 343         .init           = trizeps4_ohci_init,
 344         .exit           = trizeps4_ohci_exit,
 345 };
 346
 347 static struct map_desc trizeps4_io_desc[] __initdata = {
 348         {       /* ConXS CFSR */
 349                 .virtual        = TRIZEPS4_CFSR_VIRT,
 350                 .pfn            = __phys_to_pfn(TRIZEPS4_CFSR_PHYS),
 351                 .length         = 0x00001000,
 352                 .type           = MT_DEVICE
 353         },
 354         {       /* ConXS BCR */
 355                 .virtual        = TRIZEPS4_BOCR_VIRT,
 356                 .pfn            = __phys_to_pfn(TRIZEPS4_BOCR_PHYS),
 357                 .length         = 0x00001000,
 358                 .type           = MT_DEVICE
 359         },
 360         {       /* ConXS IRCR */
 361                 .virtual        = TRIZEPS4_IRCR_VIRT,
 362                 .pfn            = __phys_to_pfn(TRIZEPS4_IRCR_PHYS),
 363                 .length         = 0x00001000,
 364                 .type           = MT_DEVICE
 365         },
 366         {       /* ConXS DCR */
 367                 .virtual        = TRIZEPS4_DICR_VIRT,
 368                 .pfn            = __phys_to_pfn(TRIZEPS4_DICR_PHYS),
 369                 .length         = 0x00001000,
 370                 .type           = MT_DEVICE
 371         },
 372         {       /* ConXS UPSR */
 373                 .virtual        = TRIZEPS4_UPSR_VIRT,
 374                 .pfn            = __phys_to_pfn(TRIZEPS4_UPSR_PHYS),
 375                 .length         = 0x00001000,
 376                 .type           = MT_DEVICE
 377         }
 378 };
 379
 380 static struct pxafb_mode_info sharp_lcd_mode = {
 381     .pixclock           = 78000,
 382     .xres               = 640,
 383     .yres               = 480,
 384     .bpp                = 8,
 385     .hsync_len          = 4,
 386     .left_margin        = 4,
 387     .right_margin       = 4,
 388     .vsync_len          = 2,
 389     .upper_margin       = 0,
 390     .lower_margin       = 0,
 391     .sync               = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 392     .cmap_greyscale     = 0,
 393 };
 394
 395 static struct pxafb_mach_info sharp_lcd = {
 396     .modes              = &sharp_lcd_mode,
 397     .num_modes  = 1,
 398     .cmap_inverse       = 0,
 399     .cmap_static        = 0,
 400     .lccr0              = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
 401     .lccr3              = 0x0340ff02,
 402     .pxafb_backlight_power = board_backlight_power,
 403 };
 404
 405 static struct pxafb_mode_info toshiba_lcd_mode = {
 406     .pixclock           = 39720,
 407     .xres               = 640,
 408     .yres               = 480,
 409     .bpp                = 8,
 410     .hsync_len          = 63,
 411     .left_margin        = 12,
 412     .right_margin       = 12,
 413     .vsync_len          = 4,
 414     .upper_margin       = 32,
 415     .lower_margin       = 10,
 416     .sync               = 0,
 417     .cmap_greyscale     = 0,
 418 };
 419
 420 static struct pxafb_mach_info toshiba_lcd = {
 421     .modes              = &toshiba_lcd_mode,
 422     .num_modes  = 1,
 423     .cmap_inverse       = 0,
 424     .cmap_static        = 0,
 425     .lccr0              = LCCR0_Color | LCCR0_Act,
 426     .lccr3              = 0x03400002,
 427     .pxafb_backlight_power = board_backlight_power,
 428 };
 429
 430 static void __init trizeps4_init(void)
 431 {
 432         platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
 433
 434 /*      set_pxa_fb_info(&sharp_lcd); */
 435         set_pxa_fb_info(&toshiba_lcd);
 436
 437         pxa_set_mci_info(&trizeps4_mci_platform_data);
 438         pxa_set_ficp_info(&trizeps4_ficp_platform_data);
 439         pxa_set_ohci_info(&trizeps4_ohci_platform_data);
 440 }
 441
 442 static void __init trizeps4_map_io(void)
 443 {
 444         pxa_map_io();
 445         iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 446
 447         /* for DiskOnChip */
 448         pxa_gpio_mode(GPIO15_nCS_1_MD);
 449
 450         /* for off-module PIC on ConXS board */
 451         pxa_gpio_mode(GPIO_PIC | GPIO_IN);
 452
 453         /* UCB1400 irq */
 454         pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
 455
 456         /* for DM9000 LAN */
 457         pxa_gpio_mode(GPIO78_nCS_2_MD);
 458         pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
 459
 460         /* for PCMCIA device */
 461         pxa_gpio_mode(GPIO_PCD | GPIO_IN);
 462         pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
 463
 464         /* for I2C adapter */
 465         pxa_gpio_mode(GPIO117_I2CSCL_MD);
 466         pxa_gpio_mode(GPIO118_I2CSDA_MD);
 467
 468         /* MMC_DET s.o. */
 469         pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 470
 471         /* whats that for ??? */
 472         pxa_gpio_mode(GPIO79_nCS_3_MD);
 473
 474 #ifdef CONFIG_LEDS
 475         pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);          /* LED1 */
 476         pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);          /* LED2 */
 477 #endif
 478 #ifdef CONFIG_MACH_TRIZEPS4_CONXS
 479 #ifdef CONFIG_IDE_PXA_CF
 480         /* if boot direct from compact flash dont disable power */
 481         trizeps_conxs_bcr = 0x0009;
 482 #else
 483         /* this is the reset value */
 484         trizeps_conxs_bcr = 0x00A0;
 485 #endif
 486         ConXS_BCR = trizeps_conxs_bcr;
 487 #endif
 488
 489         PWER  = 0x00000002;
 490         PFER  = 0x00000000;
 491         PRER  = 0x00000002;
 492         PGSR0 = 0x0158C000;
 493         PGSR1 = 0x00FF0080;
 494         PGSR2 = 0x0001C004;
 495         /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 496         PCFR |= PCFR_OPDE;
 497 }
 498
 499 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 500         /* MAINTAINER("Jürgen Schindele") */
 501         .phys_io        = 0x40000000,
 502         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 503         .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
 504         .init_machine   = trizeps4_init,
 505         .map_io         = trizeps4_map_io,
 506         .init_irq       = pxa27x_init_irq,
 507         .timer          = &pxa_timer,
 508 MACHINE_END
 509