Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / arch / arm / mach-pxa / tosa.c
blobf99112d50b41ef44b82b99e9c187767646bb777b
1 /*
2 * Support for Sharp SL-C6000x PDAs
3 * Model: (Tosa)
5 * Copyright (c) 2005 Dirk Opfer
7 * Based on code written by Sharp/Lineo for 2.4 kernels
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
19 #include <linux/fs.h>
20 #include <linux/interrupt.h>
21 #include <linux/mmc/host.h>
22 #include <linux/pm.h>
23 #include <linux/delay.h>
24 #include <linux/gpio_keys.h>
25 #include <linux/input.h>
27 #include <asm/setup.h>
28 #include <asm/memory.h>
29 #include <asm/mach-types.h>
30 #include <asm/hardware.h>
31 #include <asm/irq.h>
32 #include <asm/system.h>
33 #include <asm/arch/pxa-regs.h>
34 #include <asm/arch/pxa2xx-regs.h>
35 #include <asm/arch/irda.h>
36 #include <asm/arch/mmc.h>
37 #include <asm/arch/udc.h>
39 #include <asm/mach/arch.h>
40 #include <asm/mach/map.h>
41 #include <asm/mach/irq.h>
42 #include <asm/arch/tosa.h>
44 #include <asm/hardware/scoop.h>
45 #include <asm/mach/sharpsl_param.h>
47 #include "generic.h"
48 #include "devices.h"
51 * SCOOP Device
53 static struct resource tosa_scoop_resources[] = {
54 [0] = {
55 .start = TOSA_CF_PHYS,
56 .end = TOSA_CF_PHYS + 0xfff,
57 .flags = IORESOURCE_MEM,
61 static struct scoop_config tosa_scoop_setup = {
62 .io_dir = TOSA_SCOOP_IO_DIR,
63 .io_out = TOSA_SCOOP_IO_OUT,
67 struct platform_device tosascoop_device = {
68 .name = "sharp-scoop",
69 .id = 0,
70 .dev = {
71 .platform_data = &tosa_scoop_setup,
73 .num_resources = ARRAY_SIZE(tosa_scoop_resources),
74 .resource = tosa_scoop_resources,
79 * SCOOP Device Jacket
81 static struct resource tosa_scoop_jc_resources[] = {
82 [0] = {
83 .start = TOSA_SCOOP_PHYS + 0x40,
84 .end = TOSA_SCOOP_PHYS + 0xfff,
85 .flags = IORESOURCE_MEM,
89 static struct scoop_config tosa_scoop_jc_setup = {
90 .io_dir = TOSA_SCOOP_JC_IO_DIR,
91 .io_out = TOSA_SCOOP_JC_IO_OUT,
94 struct platform_device tosascoop_jc_device = {
95 .name = "sharp-scoop",
96 .id = 1,
97 .dev = {
98 .platform_data = &tosa_scoop_jc_setup,
99 .parent = &tosascoop_device.dev,
101 .num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
102 .resource = tosa_scoop_jc_resources,
106 * PCMCIA
108 static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
110 .dev = &tosascoop_device.dev,
111 .irq = TOSA_IRQ_GPIO_CF_IRQ,
112 .cd_irq = TOSA_IRQ_GPIO_CF_CD,
113 .cd_irq_str = "PCMCIA0 CD",
115 .dev = &tosascoop_jc_device.dev,
116 .irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
117 .cd_irq = -1,
121 static void tosa_pcmcia_init(void)
123 /* Setup default state of GPIO outputs
124 before we enable them as outputs. */
125 GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
126 GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
127 GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
128 GPIO_bit(GPIO53_nPCE_2);
130 pxa_gpio_mode(GPIO48_nPOE_MD);
131 pxa_gpio_mode(GPIO49_nPWE_MD);
132 pxa_gpio_mode(GPIO50_nPIOR_MD);
133 pxa_gpio_mode(GPIO51_nPIOW_MD);
134 pxa_gpio_mode(GPIO55_nPREG_MD);
135 pxa_gpio_mode(GPIO56_nPWAIT_MD);
136 pxa_gpio_mode(GPIO57_nIOIS16_MD);
137 pxa_gpio_mode(GPIO52_nPCE_1_MD);
138 pxa_gpio_mode(GPIO53_nPCE_2_MD);
139 pxa_gpio_mode(GPIO54_pSKTSEL_MD);
142 static struct scoop_pcmcia_config tosa_pcmcia_config = {
143 .devs = &tosa_pcmcia_scoop[0],
144 .num_devs = 2,
145 .pcmcia_init = tosa_pcmcia_init,
149 * USB Device Controller
151 static void tosa_udc_command(int cmd)
153 switch(cmd) {
154 case PXA2XX_UDC_CMD_CONNECT:
155 set_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
156 break;
157 case PXA2XX_UDC_CMD_DISCONNECT:
158 reset_scoop_gpio(&tosascoop_jc_device.dev,TOSA_SCOOP_JC_USB_PULLUP);
159 break;
163 static struct pxa2xx_udc_mach_info udc_info __initdata = {
164 .udc_command = tosa_udc_command,
165 .gpio_vbus = TOSA_GPIO_USB_IN,
166 .gpio_vbus_inverted = 1,
170 * MMC/SD Device
172 static struct pxamci_platform_data tosa_mci_platform_data;
174 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
176 int err;
178 /* setup GPIO for PXA25x MMC controller */
179 pxa_gpio_mode(GPIO6_MMCCLK_MD);
180 pxa_gpio_mode(GPIO8_MMCCS0_MD);
181 pxa_gpio_mode(TOSA_GPIO_nSD_DETECT | GPIO_IN);
183 tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
185 err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
186 IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
187 "MMC/SD card detect", data);
188 if (err)
189 printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
191 return err;
194 static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
196 struct pxamci_platform_data* p_d = dev->platform_data;
198 if (( 1 << vdd) & p_d->ocr_mask) {
199 set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
200 } else {
201 reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_PWR_ON);
205 static int tosa_mci_get_ro(struct device *dev)
207 return (read_scoop_reg(&tosascoop_device.dev, SCOOP_GPWR)&TOSA_SCOOP_SD_WP);
210 static void tosa_mci_exit(struct device *dev, void *data)
212 free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
215 static struct pxamci_platform_data tosa_mci_platform_data = {
216 .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
217 .init = tosa_mci_init,
218 .get_ro = tosa_mci_get_ro,
219 .setpower = tosa_mci_setpower,
220 .exit = tosa_mci_exit,
224 * Irda
226 static void tosa_irda_transceiver_mode(struct device *dev, int mode)
228 if (mode & IR_OFF) {
229 reset_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
230 pxa_gpio_mode(GPIO47_STTXD|GPIO_DFLT_LOW);
231 pxa_gpio_mode(GPIO47_STTXD|GPIO_OUT);
232 } else {
233 pxa_gpio_mode(GPIO47_STTXD_MD);
234 set_scoop_gpio(&tosascoop_device.dev,TOSA_SCOOP_IR_POWERDWN);
238 static struct pxaficp_platform_data tosa_ficp_platform_data = {
239 .transceiver_cap = IR_SIRMODE | IR_OFF,
240 .transceiver_mode = tosa_irda_transceiver_mode,
244 * Tosa Keyboard
246 static struct platform_device tosakbd_device = {
247 .name = "tosa-keyboard",
248 .id = -1,
251 static struct gpio_keys_button tosa_gpio_keys[] = {
253 .type = EV_PWR,
254 .code = KEY_SUSPEND,
255 .gpio = TOSA_GPIO_ON_KEY,
256 .desc = "On key",
257 .wakeup = 1,
258 .active_low = 1,
261 .type = EV_KEY,
262 .code = TOSA_KEY_RECORD,
263 .gpio = TOSA_GPIO_RECORD_BTN,
264 .desc = "Record Button",
265 .wakeup = 1,
266 .active_low = 1,
269 .type = EV_KEY,
270 .code = TOSA_KEY_SYNC,
271 .gpio = TOSA_GPIO_SYNC,
272 .desc = "Sync Button",
273 .wakeup = 1,
274 .active_low = 1,
278 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
279 .buttons = tosa_gpio_keys,
280 .nbuttons = ARRAY_SIZE(tosa_gpio_keys),
283 static struct platform_device tosa_gpio_keys_device = {
284 .name = "gpio-keys",
285 .id = -1,
286 .dev = {
287 .platform_data = &tosa_gpio_keys_platform_data,
292 * Tosa LEDs
294 static struct platform_device tosaled_device = {
295 .name = "tosa-led",
296 .id = -1,
299 static struct platform_device *devices[] __initdata = {
300 &tosascoop_device,
301 &tosascoop_jc_device,
302 &tosakbd_device,
303 &tosa_gpio_keys_device,
304 &tosaled_device,
307 static void tosa_poweroff(void)
309 RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
311 pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
312 GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
314 mdelay(1000);
315 arm_machine_restart('h');
318 static void tosa_restart(char mode)
320 /* Bootloader magic for a reboot */
321 if((MSC0 & 0xffff0000) == 0x7ff00000)
322 MSC0 = (MSC0 & 0xffff) | 0x7ee00000;
324 tosa_poweroff();
327 static void __init tosa_init(void)
329 pm_power_off = tosa_poweroff;
330 arm_pm_restart = tosa_restart;
332 pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
333 pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
334 pxa_gpio_mode(TOSA_GPIO_USB_IN | GPIO_IN);
336 /* setup sleep mode values */
337 PWER = 0x00000002;
338 PFER = 0x00000000;
339 PRER = 0x00000002;
340 PGSR0 = 0x00000000;
341 PGSR1 = 0x00FF0002;
342 PGSR2 = 0x00014000;
343 PCFR |= PCFR_OPDE;
345 /* enable batt_fault */
346 PMCR = 0x01;
348 pxa_set_mci_info(&tosa_mci_platform_data);
349 pxa_set_udc_info(&udc_info);
350 pxa_set_ficp_info(&tosa_ficp_platform_data);
351 platform_scoop_config = &tosa_pcmcia_config;
353 platform_add_devices(devices, ARRAY_SIZE(devices));
356 static void __init fixup_tosa(struct machine_desc *desc,
357 struct tag *tags, char **cmdline, struct meminfo *mi)
359 sharpsl_save_param();
360 mi->nr_banks=1;
361 mi->bank[0].start = 0xa0000000;
362 mi->bank[0].node = 0;
363 mi->bank[0].size = (64*1024*1024);
366 MACHINE_START(TOSA, "SHARP Tosa")
367 .phys_io = 0x40000000,
368 .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
369 .fixup = fixup_tosa,
370 .map_io = pxa_map_io,
371 .init_irq = pxa25x_init_irq,
372 .init_machine = tosa_init,
373 .timer = &pxa_timer,
374 MACHINE_END