?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / arch / arm / mach-at91 / at91sam9263_devices.c
blob0b12e1adcc8e6588445dd6029a9d8f0dc0ebc872
1 /*
2 * arch/arm/mach-at91/at91sam9263_devices.c
3 *
4 * Copyright (C) 2007 Atmel Corporation.
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
10 *
11 */
12 #include <asm/mach/arch.h>
13 #include <asm/mach/map.h>
14
15 #include <linux/dma-mapping.h>
16 #include <linux/platform_device.h>
17 #include <linux/i2c-gpio.h>
18
19 #include <linux/fb.h>
20 #include <video/atmel_lcdc.h>
21
22 #include <asm/arch/board.h>
23 #include <asm/arch/gpio.h>
24 #include <asm/arch/at91sam9263.h>
25 #include <asm/arch/at91sam926x_mc.h>
26 #include <asm/arch/at91sam9263_matrix.h>
27
28 #include "generic.h"
29
30
31 /* --------------------------------------------------------------------
32 * USB Host
33 * -------------------------------------------------------------------- */
34
35 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
36 static u64 ohci_dmamask = DMA_BIT_MASK(32);
37 static struct at91_usbh_data usbh_data;
38
39 static struct resource usbh_resources[] = {
40 [0] = {
41 .start = AT91SAM9263_UHP_BASE,
42 .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
43 .flags = IORESOURCE_MEM,
44 },
45 [1] = {
46 .start = AT91SAM9263_ID_UHP,
47 .end = AT91SAM9263_ID_UHP,
48 .flags = IORESOURCE_IRQ,
49 },
50 };
51
52 static struct platform_device at91_usbh_device = {
53 .name = "at91_ohci",
54 .id = -1,
55 .dev = {
56 .dma_mask = &ohci_dmamask,
57 .coherent_dma_mask = DMA_BIT_MASK(32),
58 .platform_data = &usbh_data,
59 },
60 .resource = usbh_resources,
61 .num_resources = ARRAY_SIZE(usbh_resources),
62 };
63
64 void __init at91_add_device_usbh(struct at91_usbh_data *data)
65 {
66 int i;
67
68 if (!data)
69 return;
70
71 /* Enable VBus control for UHP ports */
72 for (i = 0; i < data->ports; i++) {
73 if (data->vbus_pin[i])
74 at91_set_gpio_output(data->vbus_pin[i], 0);
75 }
76
77 usbh_data = *data;
78 platform_device_register(&at91_usbh_device);
79 }
80 #else
81 void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
82 #endif
83
84
85 /* --------------------------------------------------------------------
86 * USB Device (Gadget)
87 * -------------------------------------------------------------------- */
88
89 #ifdef CONFIG_USB_GADGET_AT91
90 static struct at91_udc_data udc_data;
91
92 static struct resource udc_resources[] = {
93 [0] = {
94 .start = AT91SAM9263_BASE_UDP,
95 .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
96 .flags = IORESOURCE_MEM,
97 },
98 [1] = {
99 .start = AT91SAM9263_ID_UDP,
100 .end = AT91SAM9263_ID_UDP,
101 .flags = IORESOURCE_IRQ,
102 },
103 };
104
105 static struct platform_device at91_udc_device = {
106 .name = "at91_udc",
107 .id = -1,
108 .dev = {
109 .platform_data = &udc_data,
110 },
111 .resource = udc_resources,
112 .num_resources = ARRAY_SIZE(udc_resources),
113 };
114
115 void __init at91_add_device_udc(struct at91_udc_data *data)
116 {
117 if (!data)
118 return;
119
120 if (data->vbus_pin) {
121 at91_set_gpio_input(data->vbus_pin, 0);
122 at91_set_deglitch(data->vbus_pin, 1);
123 }
124
125 /* Pullup pin is handled internally by USB device peripheral */
126
127 udc_data = *data;
128 platform_device_register(&at91_udc_device);
129 }
130 #else
131 void __init at91_add_device_udc(struct at91_udc_data *data) {}
132 #endif
133
134
135 /* --------------------------------------------------------------------
136 * Ethernet
137 * -------------------------------------------------------------------- */
138
139 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
140 static u64 eth_dmamask = DMA_BIT_MASK(32);
141 static struct at91_eth_data eth_data;
142
143 static struct resource eth_resources[] = {
144 [0] = {
145 .start = AT91SAM9263_BASE_EMAC,
146 .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
147 .flags = IORESOURCE_MEM,
148 },
149 [1] = {
150 .start = AT91SAM9263_ID_EMAC,
151 .end = AT91SAM9263_ID_EMAC,
152 .flags = IORESOURCE_IRQ,
153 },
154 };
155
156 static struct platform_device at91sam9263_eth_device = {
157 .name = "macb",
158 .id = -1,
159 .dev = {
160 .dma_mask = &eth_dmamask,
161 .coherent_dma_mask = DMA_BIT_MASK(32),
162 .platform_data = &eth_data,
163 },
164 .resource = eth_resources,
165 .num_resources = ARRAY_SIZE(eth_resources),
166 };
167
168 void __init at91_add_device_eth(struct at91_eth_data *data)
169 {
170 if (!data)
171 return;
172
173 if (data->phy_irq_pin) {
174 at91_set_gpio_input(data->phy_irq_pin, 0);
175 at91_set_deglitch(data->phy_irq_pin, 1);
176 }
177
178 /* Pins used for MII and RMII */
179 at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
180 at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
181 at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
182 at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
183 at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
184 at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
185 at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
186 at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
187 at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
188 at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
189
190 if (!data->is_rmii) {
191 at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
192 at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
193 at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
194 at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
195 at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
196 at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
197 at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
198 at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
199 }
200
201 eth_data = *data;
202 platform_device_register(&at91sam9263_eth_device);
203 }
204 #else
205 void __init at91_add_device_eth(struct at91_eth_data *data) {}
206 #endif
207
208
209 /* --------------------------------------------------------------------
210 * MMC / SD
211 * -------------------------------------------------------------------- */
212
213 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
214 static u64 mmc_dmamask = DMA_BIT_MASK(32);
215 static struct at91_mmc_data mmc0_data, mmc1_data;
216
217 static struct resource mmc0_resources[] = {
218 [0] = {
219 .start = AT91SAM9263_BASE_MCI0,
220 .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
221 .flags = IORESOURCE_MEM,
222 },
223 [1] = {
224 .start = AT91SAM9263_ID_MCI0,
225 .end = AT91SAM9263_ID_MCI0,
226 .flags = IORESOURCE_IRQ,
227 },
228 };
229
230 static struct platform_device at91sam9263_mmc0_device = {
231 .name = "at91_mci",
232 .id = 0,
233 .dev = {
234 .dma_mask = &mmc_dmamask,
235 .coherent_dma_mask = DMA_BIT_MASK(32),
236 .platform_data = &mmc0_data,
237 },
238 .resource = mmc0_resources,
239 .num_resources = ARRAY_SIZE(mmc0_resources),
240 };
241
242 static struct resource mmc1_resources[] = {
243 [0] = {
244 .start = AT91SAM9263_BASE_MCI1,
245 .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
246 .flags = IORESOURCE_MEM,
247 },
248 [1] = {
249 .start = AT91SAM9263_ID_MCI1,
250 .end = AT91SAM9263_ID_MCI1,
251 .flags = IORESOURCE_IRQ,
252 },
253 };
254
255 static struct platform_device at91sam9263_mmc1_device = {
256 .name = "at91_mci",
257 .id = 1,
258 .dev = {
259 .dma_mask = &mmc_dmamask,
260 .coherent_dma_mask = DMA_BIT_MASK(32),
261 .platform_data = &mmc1_data,
262 },
263 .resource = mmc1_resources,
264 .num_resources = ARRAY_SIZE(mmc1_resources),
265 };
266
267 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
268 {
269 if (!data)
270 return;
271
272 /* input/irq */
273 if (data->det_pin) {
274 at91_set_gpio_input(data->det_pin, 1);
275 at91_set_deglitch(data->det_pin, 1);
276 }
277 if (data->wp_pin)
278 at91_set_gpio_input(data->wp_pin, 1);
279 if (data->vcc_pin)
280 at91_set_gpio_output(data->vcc_pin, 0);
281
282 if (mmc_id == 0) { /* MCI0 */
283 /* CLK */
284 at91_set_A_periph(AT91_PIN_PA12, 0);
285
286 if (data->slot_b) {
287 /* CMD */
288 at91_set_A_periph(AT91_PIN_PA16, 1);
289
290 /* DAT0, maybe DAT1..DAT3 */
291 at91_set_A_periph(AT91_PIN_PA17, 1);
292 if (data->wire4) {
293 at91_set_A_periph(AT91_PIN_PA18, 1);
294 at91_set_A_periph(AT91_PIN_PA19, 1);
295 at91_set_A_periph(AT91_PIN_PA20, 1);
296 }
297 } else {
298 /* CMD */
299 at91_set_A_periph(AT91_PIN_PA1, 1);
300
301 /* DAT0, maybe DAT1..DAT3 */
302 at91_set_A_periph(AT91_PIN_PA0, 1);
303 if (data->wire4) {
304 at91_set_A_periph(AT91_PIN_PA3, 1);
305 at91_set_A_periph(AT91_PIN_PA4, 1);
306 at91_set_A_periph(AT91_PIN_PA5, 1);
307 }
308 }
309
310 mmc0_data = *data;
311 at91_clock_associate("mci0_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
312 platform_device_register(&at91sam9263_mmc0_device);
313 } else { /* MCI1 */
314 /* CLK */
315 at91_set_A_periph(AT91_PIN_PA6, 0);
316
317 if (data->slot_b) {
318 /* CMD */
319 at91_set_A_periph(AT91_PIN_PA21, 1);
320
321 /* DAT0, maybe DAT1..DAT3 */
322 at91_set_A_periph(AT91_PIN_PA22, 1);
323 if (data->wire4) {
324 at91_set_A_periph(AT91_PIN_PA23, 1);
325 at91_set_A_periph(AT91_PIN_PA24, 1);
326 at91_set_A_periph(AT91_PIN_PA25, 1);
327 }
328 } else {
329 /* CMD */
330 at91_set_A_periph(AT91_PIN_PA7, 1);
331
332 /* DAT0, maybe DAT1..DAT3 */
333 at91_set_A_periph(AT91_PIN_PA8, 1);
334 if (data->wire4) {
335 at91_set_A_periph(AT91_PIN_PA9, 1);
336 at91_set_A_periph(AT91_PIN_PA10, 1);
337 at91_set_A_periph(AT91_PIN_PA11, 1);
338 }
339 }
340
341 mmc1_data = *data;
342 at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk");
343 platform_device_register(&at91sam9263_mmc1_device);
344 }
345 }
346 #else
347 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
348 #endif
349
350
351 /* --------------------------------------------------------------------
352 * NAND / SmartMedia
353 * -------------------------------------------------------------------- */
354
355 #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE)
356 static struct at91_nand_data nand_data;
357
358 #define NAND_BASE AT91_CHIPSELECT_3
359
360 static struct resource nand_resources[] = {
361 {
362 .start = NAND_BASE,
363 .end = NAND_BASE + SZ_256M - 1,
364 .flags = IORESOURCE_MEM,
365 }
366 };
367
368 static struct platform_device at91sam9263_nand_device = {
369 .name = "at91_nand",
370 .id = -1,
371 .dev = {
372 .platform_data = &nand_data,
373 },
374 .resource = nand_resources,
375 .num_resources = ARRAY_SIZE(nand_resources),
376 };
377
378 void __init at91_add_device_nand(struct at91_nand_data *data)
379 {
380 unsigned long csa, mode;
381
382 if (!data)
383 return;
384
385 csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
386 at91_sys_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
387
388 /* set the bus interface characteristics */
389 at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0)
390 | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
391
392 at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3)
393 | AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
394
395 at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
396
397 if (data->bus_width_16)
398 mode = AT91_SMC_DBW_16;
399 else
400 mode = AT91_SMC_DBW_8;
401 at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(2));
402
403 /* enable pin */
404 if (data->enable_pin)
405 at91_set_gpio_output(data->enable_pin, 1);
406
407 /* ready/busy pin */
408 if (data->rdy_pin)
409 at91_set_gpio_input(data->rdy_pin, 1);
410
411 /* card detect pin */
412 if (data->det_pin)
413 at91_set_gpio_input(data->det_pin, 1);
414
415 nand_data = *data;
416 platform_device_register(&at91sam9263_nand_device);
417 }
418 #else
419 void __init at91_add_device_nand(struct at91_nand_data *data) {}
420 #endif
421
422
423 /* --------------------------------------------------------------------
424 * TWI (i2c)
425 * -------------------------------------------------------------------- */
426
427 /*
428 * Prefer the GPIO code since the TWI controller isn't robust
429 * (gets overruns and underruns under load) and can only issue
430 * repeated STARTs in one scenario (the driver doesn't yet handle them).
431 */
432 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
433
434 static struct i2c_gpio_platform_data pdata = {
435 .sda_pin = AT91_PIN_PB4,
436 .sda_is_open_drain = 1,
437 .scl_pin = AT91_PIN_PB5,
438 .scl_is_open_drain = 1,
439 .udelay = 2, /* ~100 kHz */
440 };
441
442 static struct platform_device at91sam9263_twi_device = {
443 .name = "i2c-gpio",
444 .id = -1,
445 .dev.platform_data = &pdata,
446 };
447
448 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
449 {
450 at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
451 at91_set_multi_drive(AT91_PIN_PB4, 1);
452
453 at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
454 at91_set_multi_drive(AT91_PIN_PB5, 1);
455
456 i2c_register_board_info(0, devices, nr_devices);
457 platform_device_register(&at91sam9263_twi_device);
458 }
459
460 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
461
462 static struct resource twi_resources[] = {
463 [0] = {
464 .start = AT91SAM9263_BASE_TWI,
465 .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
466 .flags = IORESOURCE_MEM,
467 },
468 [1] = {
469 .start = AT91SAM9263_ID_TWI,
470 .end = AT91SAM9263_ID_TWI,
471 .flags = IORESOURCE_IRQ,
472 },
473 };
474
475 static struct platform_device at91sam9263_twi_device = {
476 .name = "at91_i2c",
477 .id = -1,
478 .resource = twi_resources,
479 .num_resources = ARRAY_SIZE(twi_resources),
480 };
481
482 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
483 {
484 /* pins used for TWI interface */
485 at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
486 at91_set_multi_drive(AT91_PIN_PB4, 1);
487
488 at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
489 at91_set_multi_drive(AT91_PIN_PB5, 1);
490
491 i2c_register_board_info(0, devices, nr_devices);
492 platform_device_register(&at91sam9263_twi_device);
493 }
494 #else
495 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
496 #endif
497
498
499 /* --------------------------------------------------------------------
500 * SPI
501 * -------------------------------------------------------------------- */
502
503 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
504 static u64 spi_dmamask = DMA_BIT_MASK(32);
505
506 static struct resource spi0_resources[] = {
507 [0] = {
508 .start = AT91SAM9263_BASE_SPI0,
509 .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
510 .flags = IORESOURCE_MEM,
511 },
512 [1] = {
513 .start = AT91SAM9263_ID_SPI0,
514 .end = AT91SAM9263_ID_SPI0,
515 .flags = IORESOURCE_IRQ,
516 },
517 };
518
519 static struct platform_device at91sam9263_spi0_device = {
520 .name = "atmel_spi",
521 .id = 0,
522 .dev = {
523 .dma_mask = &spi_dmamask,
524 .coherent_dma_mask = DMA_BIT_MASK(32),
525 },
526 .resource = spi0_resources,
527 .num_resources = ARRAY_SIZE(spi0_resources),
528 };
529
530 static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
531
532 static struct resource spi1_resources[] = {
533 [0] = {
534 .start = AT91SAM9263_BASE_SPI1,
535 .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
536 .flags = IORESOURCE_MEM,
537 },
538 [1] = {
539 .start = AT91SAM9263_ID_SPI1,
540 .end = AT91SAM9263_ID_SPI1,
541 .flags = IORESOURCE_IRQ,
542 },
543 };
544
545 static struct platform_device at91sam9263_spi1_device = {
546 .name = "atmel_spi",
547 .id = 1,
548 .dev = {
549 .dma_mask = &spi_dmamask,
550 .coherent_dma_mask = DMA_BIT_MASK(32),
551 },
552 .resource = spi1_resources,
553 .num_resources = ARRAY_SIZE(spi1_resources),
554 };
555
556 static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
557
558 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
559 {
560 int i;
561 unsigned long cs_pin;
562 short enable_spi0 = 0;
563 short enable_spi1 = 0;
564
565 /* Choose SPI chip-selects */
566 for (i = 0; i < nr_devices; i++) {
567 if (devices[i].controller_data)
568 cs_pin = (unsigned long) devices[i].controller_data;
569 else if (devices[i].bus_num == 0)
570 cs_pin = spi0_standard_cs[devices[i].chip_select];
571 else
572 cs_pin = spi1_standard_cs[devices[i].chip_select];
573
574 if (devices[i].bus_num == 0)
575 enable_spi0 = 1;
576 else
577 enable_spi1 = 1;
578
579 /* enable chip-select pin */
580 at91_set_gpio_output(cs_pin, 1);
581
582 /* pass chip-select pin to driver */
583 devices[i].controller_data = (void *) cs_pin;
584 }
585
586 spi_register_board_info(devices, nr_devices);
587
588 /* Configure SPI bus(es) */
589 if (enable_spi0) {
590 at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
591 at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
592 at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
593
594 at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
595 platform_device_register(&at91sam9263_spi0_device);
596 }
597 if (enable_spi1) {
598 at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
599 at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
600 at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
601
602 at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk");
603 platform_device_register(&at91sam9263_spi1_device);
604 }
605 }
606 #else
607 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
608 #endif
609
610
611 /* --------------------------------------------------------------------
612 * AC97
613 * -------------------------------------------------------------------- */
614
615 #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
616 static u64 ac97_dmamask = DMA_BIT_MASK(32);
617 static struct atmel_ac97_data ac97_data;
618
619 static struct resource ac97_resources[] = {
620 [0] = {
621 .start = AT91SAM9263_BASE_AC97C,
622 .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1,
623 .flags = IORESOURCE_MEM,
624 },
625 [1] = {
626 .start = AT91SAM9263_ID_AC97C,
627 .end = AT91SAM9263_ID_AC97C,
628 .flags = IORESOURCE_IRQ,
629 },
630 };
631
632 static struct platform_device at91sam9263_ac97_device = {
633 .name = "ac97c",
634 .id = 1,
635 .dev = {
636 .dma_mask = &ac97_dmamask,
637 .coherent_dma_mask = DMA_BIT_MASK(32),
638 .platform_data = &ac97_data,
639 },
640 .resource = ac97_resources,
641 .num_resources = ARRAY_SIZE(ac97_resources),
642 };
643
644 void __init at91_add_device_ac97(struct atmel_ac97_data *data)
645 {
646 if (!data)
647 return;
648
649 at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */
650 at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */
651 at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */
652 at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */
653
654 /* reset */
655 if (data->reset_pin)
656 at91_set_gpio_output(data->reset_pin, 0);
657
658 ac97_data = *ek_data;
659 platform_device_register(&at91sam9263_ac97_device);
660 }
661 #else
662 void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
663 #endif
664
665
666 /* --------------------------------------------------------------------
667 * LCD Controller
668 * -------------------------------------------------------------------- */
669
670 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
671 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
672 static struct atmel_lcdfb_info lcdc_data;
673
674 static struct resource lcdc_resources[] = {
675 [0] = {
676 .start = AT91SAM9263_LCDC_BASE,
677 .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
678 .flags = IORESOURCE_MEM,
679 },
680 [1] = {
681 .start = AT91SAM9263_ID_LCDC,
682 .end = AT91SAM9263_ID_LCDC,
683 .flags = IORESOURCE_IRQ,
684 },
685 };
686
687 static struct platform_device at91_lcdc_device = {
688 .name = "atmel_lcdfb",
689 .id = 0,
690 .dev = {
691 .dma_mask = &lcdc_dmamask,
692 .coherent_dma_mask = DMA_BIT_MASK(32),
693 .platform_data = &lcdc_data,
694 },
695 .resource = lcdc_resources,
696 .num_resources = ARRAY_SIZE(lcdc_resources),
697 };
698
699 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
700 {
701 if (!data)
702 return;
703
704 at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
705 at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
706 at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
707 at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
708 at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
709 at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
710 at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
711 at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
712 at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
713 at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
714 at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
715 at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
716 at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
717 at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
718 at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
719 at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
720 at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
721 at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
722 at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
723 at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
724 at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
725 at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
726
727 lcdc_data = *data;
728 platform_device_register(&at91_lcdc_device);
729 }
730 #else
731 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
732 #endif
733
734
735 /* --------------------------------------------------------------------
736 * Image Sensor Interface
737 * -------------------------------------------------------------------- */
738
739 #if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
740
741 struct resource isi_resources[] = {
742 [0] = {
743 .start = AT91SAM9263_BASE_ISI,
744 .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
745 .flags = IORESOURCE_MEM,
746 },
747 [1] = {
748 .start = AT91SAM9263_ID_ISI,
749 .end = AT91SAM9263_ID_ISI,
750 .flags = IORESOURCE_IRQ,
751 },
752 };
753
754 static struct platform_device at91sam9263_isi_device = {
755 .name = "at91_isi",
756 .id = -1,
757 .resource = isi_resources,
758 .num_resources = ARRAY_SIZE(isi_resources),
759 };
760
761 void __init at91_add_device_isi(void)
762 {
763 at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
764 at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
765 at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
766 at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
767 at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
768 at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
769 at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
770 at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
771 at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
772 at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
773 at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
774 at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
775 at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
776 at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
777 at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
778 at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
779 }
780 #else
781 void __init at91_add_device_isi(void) {}
782 #endif
783
784
785 /* --------------------------------------------------------------------
786 * RTT
787 * -------------------------------------------------------------------- */
788
789 static struct resource rtt0_resources[] = {
790 {
791 .start = AT91_BASE_SYS + AT91_RTT0,
792 .end = AT91_BASE_SYS + AT91_RTT0 + SZ_16 - 1,
793 .flags = IORESOURCE_MEM,
794 }
795 };
796
797 static struct platform_device at91sam9263_rtt0_device = {
798 .name = "at91_rtt",
799 .id = 0,
800 .resource = rtt0_resources,
801 .num_resources = ARRAY_SIZE(rtt0_resources),
802 };
803
804 static struct resource rtt1_resources[] = {
805 {
806 .start = AT91_BASE_SYS + AT91_RTT1,
807 .end = AT91_BASE_SYS + AT91_RTT1 + SZ_16 - 1,
808 .flags = IORESOURCE_MEM,
809 }
810 };
811
812 static struct platform_device at91sam9263_rtt1_device = {
813 .name = "at91_rtt",
814 .id = 1,
815 .resource = rtt1_resources,
816 .num_resources = ARRAY_SIZE(rtt1_resources),
817 };
818
819 static void __init at91_add_device_rtt(void)
820 {
821 platform_device_register(&at91sam9263_rtt0_device);
822 platform_device_register(&at91sam9263_rtt1_device);
823 }
824
825
826 /* --------------------------------------------------------------------
827 * Watchdog
828 * -------------------------------------------------------------------- */
829
830 #if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
831 static struct platform_device at91sam9263_wdt_device = {
832 .name = "at91_wdt",
833 .id = -1,
834 .num_resources = 0,
835 };
836
837 static void __init at91_add_device_watchdog(void)
838 {
839 platform_device_register(&at91sam9263_wdt_device);
840 }
841 #else
842 static void __init at91_add_device_watchdog(void) {}
843 #endif
844
845
846 /* --------------------------------------------------------------------
847 * SSC -- Synchronous Serial Controller
848 * -------------------------------------------------------------------- */
849
850 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
851 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
852
853 static struct resource ssc0_resources[] = {
854 [0] = {
855 .start = AT91SAM9263_BASE_SSC0,
856 .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
857 .flags = IORESOURCE_MEM,
858 },
859 [1] = {
860 .start = AT91SAM9263_ID_SSC0,
861 .end = AT91SAM9263_ID_SSC0,
862 .flags = IORESOURCE_IRQ,
863 },
864 };
865
866 static struct platform_device at91sam9263_ssc0_device = {
867 .name = "ssc",
868 .id = 0,
869 .dev = {
870 .dma_mask = &ssc0_dmamask,
871 .coherent_dma_mask = DMA_BIT_MASK(32),
872 },
873 .resource = ssc0_resources,
874 .num_resources = ARRAY_SIZE(ssc0_resources),
875 };
876
877 static inline void configure_ssc0_pins(unsigned pins)
878 {
879 if (pins & ATMEL_SSC_TF)
880 at91_set_B_periph(AT91_PIN_PB0, 1);
881 if (pins & ATMEL_SSC_TK)
882 at91_set_B_periph(AT91_PIN_PB1, 1);
883 if (pins & ATMEL_SSC_TD)
884 at91_set_B_periph(AT91_PIN_PB2, 1);
885 if (pins & ATMEL_SSC_RD)
886 at91_set_B_periph(AT91_PIN_PB3, 1);
887 if (pins & ATMEL_SSC_RK)
888 at91_set_B_periph(AT91_PIN_PB4, 1);
889 if (pins & ATMEL_SSC_RF)
890 at91_set_B_periph(AT91_PIN_PB5, 1);
891 }
892
893 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
894
895 static struct resource ssc1_resources[] = {
896 [0] = {
897 .start = AT91SAM9263_BASE_SSC1,
898 .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
899 .flags = IORESOURCE_MEM,
900 },
901 [1] = {
902 .start = AT91SAM9263_ID_SSC1,
903 .end = AT91SAM9263_ID_SSC1,
904 .flags = IORESOURCE_IRQ,
905 },
906 };
907
908 static struct platform_device at91sam9263_ssc1_device = {
909 .name = "ssc",
910 .id = 1,
911 .dev = {
912 .dma_mask = &ssc1_dmamask,
913 .coherent_dma_mask = DMA_BIT_MASK(32),
914 },
915 .resource = ssc1_resources,
916 .num_resources = ARRAY_SIZE(ssc1_resources),
917 };
918
919 static inline void configure_ssc1_pins(unsigned pins)
920 {
921 if (pins & ATMEL_SSC_TF)
922 at91_set_A_periph(AT91_PIN_PB6, 1);
923 if (pins & ATMEL_SSC_TK)
924 at91_set_A_periph(AT91_PIN_PB7, 1);
925 if (pins & ATMEL_SSC_TD)
926 at91_set_A_periph(AT91_PIN_PB8, 1);
927 if (pins & ATMEL_SSC_RD)
928 at91_set_A_periph(AT91_PIN_PB9, 1);
929 if (pins & ATMEL_SSC_RK)
930 at91_set_A_periph(AT91_PIN_PB10, 1);
931 if (pins & ATMEL_SSC_RF)
932 at91_set_A_periph(AT91_PIN_PB11, 1);
933 }
934
935 /*
936 * Return the device node so that board init code can use it as the
937 * parent for the device node reflecting how it's used on this board.
938 *
939 * SSC controllers are accessed through library code, instead of any
940 * kind of all-singing/all-dancing driver. For example one could be
941 * used by a particular I2S audio codec's driver, while another one
942 * on the same system might be used by a custom data capture driver.
943 */
944 void __init at91_add_device_ssc(unsigned id, unsigned pins)
945 {
946 struct platform_device *pdev;
947
948 /*
949 * NOTE: caller is responsible for passing information matching
950 * "pins" to whatever will be using each particular controller.
951 */
952 switch (id) {
953 case AT91SAM9263_ID_SSC0:
954 pdev = &at91sam9263_ssc0_device;
955 configure_ssc0_pins(pins);
956 at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
957 break;
958 case AT91SAM9263_ID_SSC1:
959 pdev = &at91sam9263_ssc1_device;
960 configure_ssc1_pins(pins);
961 at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
962 break;
963 default:
964 return;
965 }
966
967 platform_device_register(pdev);
968 }
969
970 #else
971 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
972 #endif
973
974
975 /* --------------------------------------------------------------------
976 * UART
977 * -------------------------------------------------------------------- */
978
979 #if defined(CONFIG_SERIAL_ATMEL)
980
981 static struct resource dbgu_resources[] = {
982 [0] = {
983 .start = AT91_VA_BASE_SYS + AT91_DBGU,
984 .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
985 .flags = IORESOURCE_MEM,
986 },
987 [1] = {
988 .start = AT91_ID_SYS,
989 .end = AT91_ID_SYS,
990 .flags = IORESOURCE_IRQ,
991 },
992 };
993
994 static struct atmel_uart_data dbgu_data = {
995 .use_dma_tx = 0,
996 .use_dma_rx = 0, /* DBGU not capable of receive DMA */
997 .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
998 };
999
1000 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
1001
1002 static struct platform_device at91sam9263_dbgu_device = {
1003 .name = "atmel_usart",
1004 .id = 0,
1005 .dev = {
1006 .dma_mask = &dbgu_dmamask,
1007 .coherent_dma_mask = DMA_BIT_MASK(32),
1008 .platform_data = &dbgu_data,
1009 },
1010 .resource = dbgu_resources,
1011 .num_resources = ARRAY_SIZE(dbgu_resources),
1012 };
1013
1014 static inline void configure_dbgu_pins(void)
1015 {
1016 at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
1017 at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
1018 }
1019
1020 static struct resource uart0_resources[] = {
1021 [0] = {
1022 .start = AT91SAM9263_BASE_US0,
1023 .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
1024 .flags = IORESOURCE_MEM,
1025 },
1026 [1] = {
1027 .start = AT91SAM9263_ID_US0,
1028 .end = AT91SAM9263_ID_US0,
1029 .flags = IORESOURCE_IRQ,
1030 },
1031 };
1032
1033 static struct atmel_uart_data uart0_data = {
1034 .use_dma_tx = 1,
1035 .use_dma_rx = 1,
1036 };
1037
1038 static u64 uart0_dmamask = DMA_BIT_MASK(32);
1039
1040 static struct platform_device at91sam9263_uart0_device = {
1041 .name = "atmel_usart",
1042 .id = 1,
1043 .dev = {
1044 .dma_mask = &uart0_dmamask,
1045 .coherent_dma_mask = DMA_BIT_MASK(32),
1046 .platform_data = &uart0_data,
1047 },
1048 .resource = uart0_resources,
1049 .num_resources = ARRAY_SIZE(uart0_resources),
1050 };
1051
1052 static inline void configure_usart0_pins(unsigned pins)
1053 {
1054 at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
1055 at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
1056
1057 if (pins & ATMEL_UART_RTS)
1058 at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
1059 if (pins & ATMEL_UART_CTS)
1060 at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
1061 }
1062
1063 static struct resource uart1_resources[] = {
1064 [0] = {
1065 .start = AT91SAM9263_BASE_US1,
1066 .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
1067 .flags = IORESOURCE_MEM,
1068 },
1069 [1] = {
1070 .start = AT91SAM9263_ID_US1,
1071 .end = AT91SAM9263_ID_US1,
1072 .flags = IORESOURCE_IRQ,
1073 },
1074 };
1075
1076 static struct atmel_uart_data uart1_data = {
1077 .use_dma_tx = 1,
1078 .use_dma_rx = 1,
1079 };
1080
1081 static u64 uart1_dmamask = DMA_BIT_MASK(32);
1082
1083 static struct platform_device at91sam9263_uart1_device = {
1084 .name = "atmel_usart",
1085 .id = 2,
1086 .dev = {
1087 .dma_mask = &uart1_dmamask,
1088 .coherent_dma_mask = DMA_BIT_MASK(32),
1089 .platform_data = &uart1_data,
1090 },
1091 .resource = uart1_resources,
1092 .num_resources = ARRAY_SIZE(uart1_resources),
1093 };
1094
1095 static inline void configure_usart1_pins(unsigned pins)
1096 {
1097 at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
1098 at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
1099
1100 if (pins & ATMEL_UART_RTS)
1101 at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
1102 if (pins & ATMEL_UART_CTS)
1103 at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
1104 }
1105
1106 static struct resource uart2_resources[] = {
1107 [0] = {
1108 .start = AT91SAM9263_BASE_US2,
1109 .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
1110 .flags = IORESOURCE_MEM,
1111 },
1112 [1] = {
1113 .start = AT91SAM9263_ID_US2,
1114 .end = AT91SAM9263_ID_US2,
1115 .flags = IORESOURCE_IRQ,
1116 },
1117 };
1118
1119 static struct atmel_uart_data uart2_data = {
1120 .use_dma_tx = 1,
1121 .use_dma_rx = 1,
1122 };
1123
1124 static u64 uart2_dmamask = DMA_BIT_MASK(32);
1125
1126 static struct platform_device at91sam9263_uart2_device = {
1127 .name = "atmel_usart",
1128 .id = 3,
1129 .dev = {
1130 .dma_mask = &uart2_dmamask,
1131 .coherent_dma_mask = DMA_BIT_MASK(32),
1132 .platform_data = &uart2_data,
1133 },
1134 .resource = uart2_resources,
1135 .num_resources = ARRAY_SIZE(uart2_resources),
1136 };
1137
1138 static inline void configure_usart2_pins(unsigned pins)
1139 {
1140 at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
1141 at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
1142
1143 if (pins & ATMEL_UART_RTS)
1144 at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
1145 if (pins & ATMEL_UART_CTS)
1146 at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
1147 }
1148
1149 static struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
1150 struct platform_device *atmel_default_console_device; /* the serial console device */
1151
1152 void __init __deprecated at91_init_serial(struct at91_uart_config *config)
1153 {
1154 int i;
1155
1156 /* Fill in list of supported UARTs */
1157 for (i = 0; i < config->nr_tty; i++) {
1158 switch (config->tty_map[i]) {
1159 case 0:
1160 configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
1161 at91_uarts[i] = &at91sam9263_uart0_device;
1162 at91_clock_associate("usart0_clk", &at91sam9263_uart0_device.dev, "usart");
1163 break;
1164 case 1:
1165 configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
1166 at91_uarts[i] = &at91sam9263_uart1_device;
1167 at91_clock_associate("usart1_clk", &at91sam9263_uart1_device.dev, "usart");
1168 break;
1169 case 2:
1170 configure_usart2_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
1171 at91_uarts[i] = &at91sam9263_uart2_device;
1172 at91_clock_associate("usart2_clk", &at91sam9263_uart2_device.dev, "usart");
1173 break;
1174 case 3:
1175 configure_dbgu_pins();
1176 at91_uarts[i] = &at91sam9263_dbgu_device;
1177 at91_clock_associate("mck", &at91sam9263_dbgu_device.dev, "usart");
1178 break;
1179 default:
1180 continue;
1181 }
1182 at91_uarts[i]->id = i; /* update ID number to mapped ID */
1183 }
1184
1185 /* Set serial console device */
1186 if (config->console_tty < ATMEL_MAX_UART)
1187 atmel_default_console_device = at91_uarts[config->console_tty];
1188 if (!atmel_default_console_device)
1189 printk(KERN_INFO "AT91: No default serial console defined.\n");
1190 }
1191
1192 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1193 {
1194 struct platform_device *pdev;
1195
1196 switch (id) {
1197 case 0: /* DBGU */
1198 pdev = &at91sam9263_dbgu_device;
1199 configure_dbgu_pins();
1200 at91_clock_associate("mck", &pdev->dev, "usart");
1201 break;
1202 case AT91SAM9263_ID_US0:
1203 pdev = &at91sam9263_uart0_device;
1204 configure_usart0_pins(pins);
1205 at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1206 break;
1207 case AT91SAM9263_ID_US1:
1208 pdev = &at91sam9263_uart1_device;
1209 configure_usart1_pins(pins);
1210 at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1211 break;
1212 case AT91SAM9263_ID_US2:
1213 pdev = &at91sam9263_uart2_device;
1214 configure_usart2_pins(pins);
1215 at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1216 break;
1217 default:
1218 return;
1219 }
1220 pdev->id = portnr; /* update to mapped ID */
1221
1222 if (portnr < ATMEL_MAX_UART)
1223 at91_uarts[portnr] = pdev;
1224 }
1225
1226 void __init at91_set_serial_console(unsigned portnr)
1227 {
1228 if (portnr < ATMEL_MAX_UART)
1229 atmel_default_console_device = at91_uarts[portnr];
1230 if (!atmel_default_console_device)
1231 printk(KERN_INFO "AT91: No default serial console defined.\n");
1232 }
1233
1234 void __init at91_add_device_serial(void)
1235 {
1236 int i;
1237
1238 for (i = 0; i < ATMEL_MAX_UART; i++) {
1239 if (at91_uarts[i])
1240 platform_device_register(at91_uarts[i]);
1241 }
1242 }
1243 #else
1244 void __init at91_init_serial(struct at91_uart_config *config) {}
1245 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1246 void __init at91_set_serial_console(unsigned portnr) {}
1247 void __init at91_add_device_serial(void) {}
1248 #endif
1249
1250
1251 /* -------------------------------------------------------------------- */
1252 /*
1253 * These devices are always present and don't need any board-specific
1254 * setup.
1255 */
1256 static int __init at91_add_standard_devices(void)
1257 {
1258 at91_add_device_rtt();
1259 at91_add_device_watchdog();
1260 return 0;
1261 }
1262
1263 arch_initcall(at91_add_standard_devices);
mah project overlay