Committer: Michael Beasley <mike@snafu.setup>
[mikesnafu-overlay.git] / arch / alpha / kernel / irq_alpha.c
blobe16aeb6e79ef8cd62955f27d7fd623cacfd79cca
1 /*
2 * Alpha specific irq code.
3 */
5 #include <linux/init.h>
6 #include <linux/sched.h>
7 #include <linux/irq.h>
8 #include <linux/kernel_stat.h>
9 #include <linux/module.h>
11 #include <asm/machvec.h>
12 #include <asm/dma.h>
14 #include "proto.h"
15 #include "irq_impl.h"
17 /* Hack minimum IPL during interrupt processing for broken hardware. */
18 #ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
19 int __min_ipl;
20 EXPORT_SYMBOL(__min_ipl);
21 #endif
24 * Performance counter hook. A module can override this to
25 * do something useful.
27 static void
28 dummy_perf(unsigned long vector, struct pt_regs *regs)
30 irq_err_count++;
31 printk(KERN_CRIT "Performance counter interrupt!\n");
34 void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;
35 EXPORT_SYMBOL(perf_irq);
38 * The main interrupt entry point.
41 asmlinkage void
42 do_entInt(unsigned long type, unsigned long vector,
43 unsigned long la_ptr, struct pt_regs *regs)
45 struct pt_regs *old_regs;
46 switch (type) {
47 case 0:
48 #ifdef CONFIG_SMP
49 handle_ipi(regs);
50 return;
51 #else
52 irq_err_count++;
53 printk(KERN_CRIT "Interprocessor interrupt? "
54 "You must be kidding!\n");
55 #endif
56 break;
57 case 1:
58 old_regs = set_irq_regs(regs);
59 #ifdef CONFIG_SMP
61 long cpu;
63 local_irq_disable();
64 smp_percpu_timer_interrupt(regs);
65 cpu = smp_processor_id();
66 if (cpu != boot_cpuid) {
67 kstat_cpu(cpu).irqs[RTC_IRQ]++;
68 } else {
69 handle_irq(RTC_IRQ);
72 #else
73 handle_irq(RTC_IRQ);
74 #endif
75 set_irq_regs(old_regs);
76 return;
77 case 2:
78 old_regs = set_irq_regs(regs);
79 alpha_mv.machine_check(vector, la_ptr);
80 set_irq_regs(old_regs);
81 return;
82 case 3:
83 old_regs = set_irq_regs(regs);
84 alpha_mv.device_interrupt(vector);
85 set_irq_regs(old_regs);
86 return;
87 case 4:
88 perf_irq(la_ptr, regs);
89 return;
90 default:
91 printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n",
92 type, vector);
94 printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps);
97 void __init
98 common_init_isa_dma(void)
100 outb(0, DMA1_RESET_REG);
101 outb(0, DMA2_RESET_REG);
102 outb(0, DMA1_CLR_MASK_REG);
103 outb(0, DMA2_CLR_MASK_REG);
106 void __init
107 init_IRQ(void)
109 /* Just in case the platform init_irq() causes interrupts/mchecks
110 (as is the case with RAWHIDE, at least). */
111 wrent(entInt, 0);
113 alpha_mv.init_irq();
117 * machine error checks
119 #define MCHK_K_TPERR 0x0080
120 #define MCHK_K_TCPERR 0x0082
121 #define MCHK_K_HERR 0x0084
122 #define MCHK_K_ECC_C 0x0086
123 #define MCHK_K_ECC_NC 0x0088
124 #define MCHK_K_OS_BUGCHECK 0x008A
125 #define MCHK_K_PAL_BUGCHECK 0x0090
127 #ifndef CONFIG_SMP
128 struct mcheck_info __mcheck_info;
129 #endif
131 void
132 process_mcheck_info(unsigned long vector, unsigned long la_ptr,
133 const char *machine, int expected)
135 struct el_common *mchk_header;
136 const char *reason;
139 * See if the machine check is due to a badaddr() and if so,
140 * ignore it.
143 #ifdef CONFIG_VERBOSE_MCHECK
144 if (alpha_verbose_mcheck > 1) {
145 printk(KERN_CRIT "%s machine check %s\n", machine,
146 expected ? "expected." : "NOT expected!!!");
148 #endif
150 if (expected) {
151 int cpu = smp_processor_id();
152 mcheck_expected(cpu) = 0;
153 mcheck_taken(cpu) = 1;
154 return;
157 mchk_header = (struct el_common *)la_ptr;
159 printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n",
160 machine, vector, get_irq_regs()->pc, mchk_header->code);
162 switch (mchk_header->code) {
163 /* Machine check reasons. Defined according to PALcode sources. */
164 case 0x80: reason = "tag parity error"; break;
165 case 0x82: reason = "tag control parity error"; break;
166 case 0x84: reason = "generic hard error"; break;
167 case 0x86: reason = "correctable ECC error"; break;
168 case 0x88: reason = "uncorrectable ECC error"; break;
169 case 0x8A: reason = "OS-specific PAL bugcheck"; break;
170 case 0x90: reason = "callsys in kernel mode"; break;
171 case 0x96: reason = "i-cache read retryable error"; break;
172 case 0x98: reason = "processor detected hard error"; break;
174 /* System specific (these are for Alcor, at least): */
175 case 0x202: reason = "system detected hard error"; break;
176 case 0x203: reason = "system detected uncorrectable ECC error"; break;
177 case 0x204: reason = "SIO SERR occurred on PCI bus"; break;
178 case 0x205: reason = "parity error detected by core logic"; break;
179 case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break;
180 case 0x207: reason = "non-existent memory error"; break;
181 case 0x208: reason = "MCHK_K_DCSR"; break;
182 case 0x209: reason = "PCI SERR detected"; break;
183 case 0x20b: reason = "PCI data parity error detected"; break;
184 case 0x20d: reason = "PCI address parity error detected"; break;
185 case 0x20f: reason = "PCI master abort error"; break;
186 case 0x211: reason = "PCI target abort error"; break;
187 case 0x213: reason = "scatter/gather PTE invalid error"; break;
188 case 0x215: reason = "flash ROM write error"; break;
189 case 0x217: reason = "IOA timeout detected"; break;
190 case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break;
191 case 0x21b: reason = "EISA fail-safe timer timeout"; break;
192 case 0x21d: reason = "EISA bus time-out"; break;
193 case 0x21f: reason = "EISA software generated NMI"; break;
194 case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break;
195 default: reason = "unknown"; break;
198 printk(KERN_CRIT "machine check type: %s%s\n",
199 reason, mchk_header->retry ? " (retryable)" : "");
201 dik_show_regs(get_irq_regs(), NULL);
203 #ifdef CONFIG_VERBOSE_MCHECK
204 if (alpha_verbose_mcheck > 1) {
205 /* Dump the logout area to give all info. */
206 unsigned long *ptr = (unsigned long *)la_ptr;
207 long i;
208 for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
209 printk(KERN_CRIT " +%8lx %016lx %016lx\n",
210 i*sizeof(long), ptr[i], ptr[i+1]);
213 #endif /* CONFIG_VERBOSE_MCHECK */
217 * The special RTC interrupt type. The interrupt itself was
218 * processed by PALcode, and comes in via entInt vector 1.
221 static void rtc_enable_disable(unsigned int irq) { }
222 static unsigned int rtc_startup(unsigned int irq) { return 0; }
224 struct irqaction timer_irqaction = {
225 .handler = timer_interrupt,
226 .flags = IRQF_DISABLED,
227 .name = "timer",
230 static struct hw_interrupt_type rtc_irq_type = {
231 .typename = "RTC",
232 .startup = rtc_startup,
233 .shutdown = rtc_enable_disable,
234 .enable = rtc_enable_disable,
235 .disable = rtc_enable_disable,
236 .ack = rtc_enable_disable,
237 .end = rtc_enable_disable,
240 void __init
241 init_rtc_irq(void)
243 irq_desc[RTC_IRQ].status = IRQ_DISABLED;
244 irq_desc[RTC_IRQ].chip = &rtc_irq_type;
245 setup_irq(RTC_IRQ, &timer_irqaction);
248 /* Dummy irqactions. */
249 struct irqaction isa_cascade_irqaction = {
250 .handler = no_action,
251 .name = "isa-cascade"
254 struct irqaction timer_cascade_irqaction = {
255 .handler = no_action,
256 .name = "timer-cascade"
259 struct irqaction halt_switch_irqaction = {
260 .handler = no_action,
261 .name = "halt-switch"