3 - Build requirements for GNU Midnight Commander
4 - Installation instructions for GNU Midnight Commander
5 - Where to get more information on GNU Midnight Commander
6 - Notes about GNU Midnight Commander installation
7 - Obtaining related software
9 Build requirements for GNU Midnight Commander
10 ----------------------------------------------------
19 - pcre (if glib < 2.14)
25 Installation instructions for GNU Midnight Commander
26 ----------------------------------------------------
28 The `configure' shell script attempts to guess correct values for
29 various system-dependent variables used during compilation, and creates
30 the makefiles. It also creates a file `config.status' that you can run
31 in the future to recreate the current configuration.
33 To compile this package:
35 1. Configure the package for your system.
37 Normally, you just `cd' to the directory containing the package's source
38 code and type `./configure'. If you're using `csh' on an old version of
39 SystemV, you might need to type `sh configure' instead to prevent `csh'
40 from trying to execute `configure' itself. Under AIX, you may need to
41 use ksh instead of sh.
43 Running `configure' takes a while. While it is running, it prints some
44 messages that tell what it is doing. If you don't want to see any
45 messages, run `configure' with the `--quiet' option.
47 To compile the package in a different directory than the one containing
48 the source code, you must use a version of `make' supporting the `VPATH'
49 variable, such as GNU `make'. Change to the directory where you want
50 the object files and executables to go and run the `configure' script
51 with the full path. If for some reason `configure' cannot find the
52 source code directory, run `configure' with the option `--srcdir=DIR',
53 where DIR is the directory that contains the source code.
55 By default, `make install' will install the package's files in
56 `/usr/local/bin', `/usr/local/man', etc. You can specify an
57 installation prefix other than `/usr/local' by giving `configure' the
58 option `--prefix=PATH'.
60 You can specify separate installation prefixes for architecture specific
61 files and architecture-independent files. If you give `configure' the
62 option `--exec-prefix=PATH', the package will use PATH as the prefix for
63 installing binary programs and libraries. Data files and documentation
64 will still use the regular prefix. Normally, all files are installed
65 using the same prefix.
67 If compiled on GNU/Linux, Midnight Commander detects if you have the gpm
68 library installed. If you installed the gpm mouse library in a
69 non-standard place, you will need to use the --with-gpm-mouse flag with
70 the directory base where you installed the gpm package.
72 `configure' recognizes the following options (the list may be
73 incomplete, use `configure --help' to get the full list):
76 Print a summary of the options to `configure' and exit.
80 Do not print messages saying which checks are being made.
83 Print the version of Autoconf used to generate the `configure'
87 Configure GNU Midnight Commander to be compiled without the
88 built-in file editor. The built-in editor is compiled in by
92 Use this flag to disable gpm mouse support (e.g. if you want to
93 use mouse only on X terminals).
96 Force linking against glib statically. This option is intended for
97 building binaries for distribution purposes and may not work on
98 some operating systems.
100 `--with-mmap', `--without-mmap'
101 Force using or not using the mmap function. It is currently used
102 in the internal viewer. `--with-mmap' may be useful on some
103 versions of AIX where the `configure' script decides that mmap is
104 broken, but it's actually suitable for the internal viewer.
106 `--with-subshell[=optional]', `--without-subshell'
107 The subshell support is by default turned on, you can disable
108 this by using the --without-subshell option. If you pass the
109 =optional parameter, then the subshell support is turned off by
110 default. To turn it on, specify the `-U' option to the program.
113 By default, the Midnight Commander tries to connect to the X Window
114 System events to query the status of the keyboard modifiers, such
115 as Control, Shift and Alt, when invoked in a terminal emulator
116 under X11. This is necessary (but not always sufficient) to
117 recognize some optional but handy key combinations like Ctrl-Home
118 and Shift-Cursor keys. Use `--without-x' if the dependency on
119 X11 libraries is not desired.
121 `--disable-largefile'
122 This option disables support for large files (2 gigabytes and more)
123 on the systems where file operations use 32-bit offsets by default,
124 but support for 64-bit offsets is available. May be useful for
125 slow processors and embedded systems.
128 This option adds support for selecting character set of the text in
129 the internal viewer and editor and converting it on the fly. The
130 implementation of this option is currently incomplete.
132 `--disable-background'
133 This option disables support for background operations. Background
134 operations allow to perform some tasks such as copying files in a
135 separate background process. Any messages from the background
136 process are forwarded to the foreground process. More advanced
137 dialogs cannot be forwarded yet, so the background process uses the
138 default. Background code is known to be less stable than the rest
139 of the code, so you may want to disable it at the compile time.
142 This option allow users to place user config directories in any
143 place. By default value is 'XDG', this mean, mc will respect XDG
144 standards. If other value will specified, this will used as directory
145 name (relative to $HOME).
151 This option disables the Virtual File System switch code in the
152 Midnight Commander and uses the standard file system calls for
153 file access. If you specify this option, you won't get the
154 transparent access to archives and remote directories.
158 Support for cpio filesystem
162 Support for tar filesystem
180 `--enable-vfs-undelfs'
182 Support for ext2 undelete filesystem.
183 On systems that use the ext2 or ext3 file system and have the
184 libext2fs library available, this option adds support for
185 recovering deleted files (the undel virtual file system).
189 This option enables remote VFS over the SMB protocol. A stripped
190 down version of samba distributed with the sources is compiled and
191 linked with the mc executable. It is recommended that you install
192 Samba client, since mc uses some files from Samba under certain
193 conditions. Please visit http://www.samba.org/ to learn more.
199 You may also tell configure which screen library you want to use with
200 the Midnight Commander. The configure script will use S-Lang as
201 default, and prefers an already installed S-Lang library over the
202 included one, but you can override this by using the following flag
203 (please note that since S-Lang is default, it is tested better than
206 `--with-screen={slang|ncurses}'
207 Choose the library used to manage interaction with the terminal.
208 `slang' means S-Lang library already installed on the system,
209 `ncurses' means ncurses library already installed on the system.
210 The S-Lang library is used by default if found.
212 `--with-slang-includes=[DIR]'
213 Set path to SLANG includes [default=/usr/include]; make sense
214 only if --with-screen=slang is used.
216 `--with-slang-libs=[DIR]'
217 Set path to SLANG library [default=/usr/lib]; mke sense only
218 if --with-screen=slang is used.
220 `--with-ncurses-includes=[DIR]'
221 Set path to ncurses includes [default=/usr/include]; make
222 sense only if --with-screen=ncurses is used;
223 for /usr/local/include/ncurses specify /usr/local/include.
225 `--with-ncurses-libs=[DIR]'
226 Set path to ncurses library [default=/usr/lib]; make sense
227 only if --with-screen=ncurses is used.
232 On systems that require unusual options for compilation or linking that
233 the package's `configure' script does not know about, you can give
234 `configure' initial values for variables by placing them in the command
237 ./configure CC='gcc -traditional' LIBS=-lposix
239 Here are the variables that you might want to override when running
243 C compiler program. The default is `gcc' if found, otherwise `cc'.
246 The default flags used to build the program.
249 Program to use to install files. The default is `install' if you
250 have it, `cp' otherwise.
252 For these variables, any value given in the command line is added to the
253 value that `configure' decides to use:
256 Libraries to link with, in the form `-lfoo -lbar...'.
259 Linker flags, e.g. -L<lib dir> if you have libraries in a
260 nonstandard directory <lib dir>
263 C/C++ preprocessor flags, e.g. -I<include dir> if you have
264 headers in a nonstandard directory <include dir>
266 If you need to do unusual things to compile the package, we encourage
267 you to figure out how `configure' could check whether to do them, and
268 mail diffs or instructions to the address given in the README so we can
269 include them in the next release.
271 2. Type `make' to compile the package.
273 3. Type `make install' to install programs, data files, and the
274 documentation. On GNU/Linux the console screen saver is installed as
277 4. You can remove the program binaries and object files from the source
278 directory by typing `make clean'. If you want to clean the source tree
279 completely, so that it contains only those files that should be packaged
280 in the archive, issue `make distclean'. If you've run configure in a
281 different directory than the source tree, distclean won't remove your
282 *.o and linked programs in that directory.
284 5. GNU Midnight Commander allows you to stay in the last current
285 directory after exiting MC. This is done with a shell function, the man
286 page has more information about this.
288 The file `configure.in' is used to create `configure' by a program
289 called `autoconf'. You only need it if you want to regenerate
290 `configure' using a newer version of `autoconf'.
293 Where to get more information on GNU Midnight Commander
294 -------------------------------------------------------
296 There are two mailing lists for the program:
298 mc@gnome.org: Discussion on GNU Midnight Commander file manager.
299 mc-devel@gnome.org: Discussion between the developers of the program.
301 To subscribe to the mailing lists, visit their respective pages:
303 http://mail.gnome.org/mailman/listinfo/mc/
304 http://mail.gnome.org/mailman/listinfo/mc-devel/
307 Notes about GNU Midnight Commander installation
308 -----------------------------------------------
310 GNU Midnight Commander has been run in the following configurations:
317 mips-dec-{open,net}bsd1.0
320 powerpc-ibm-aix5.3.0.0 (IBM XL C, IBM XL C/C++)
327 mc88110-aviion-dgux5.4
332 Midnight Commander is written in a portable manner and uses GNU Autoconf
333 for configuration, so it is expected to compile without changes on many
334 other operating systems.
336 You will need an ANSI C Compiler (such as GCC) and glib library to
337 compile the source. GNU Midnight Commander now comes with the S-Lang
338 screen manager, a fast screen manager, but you may want to use the
339 already installed S-Lang or ncurses library.
341 If you insist on using ncurses, it's recommended to use ncurses 4.1 and
342 above, since the older versions don't support resizing in the xterm
345 GNU Midnight Commander comes with the mouse support on xterms and in the
346 Linux console. In order to take advantage of the mouse support on the
347 Linux console you will need the gpm mouse server (see the section
348 "Obtaining related software" in this file).
350 Once you get gpm, compile it and install it, then you will have to
351 specify the `--with-gpm-mouse' flag to the configure program if you
352 installed it in a non-standard directory. If you installed the gpm
353 package under /usr or /usr/local, you don't need to specify this flag;
354 configure will find gpm for you. The support for mice on xterms is
357 We are working on further enhancements to the program, but we're not
358 sure which ones must go first. If you would like to point us in the
359 Right Direction we will be glad to hear from you.
361 If you happen to find a feature that doesn't do what you expect, please
362 write to mc@gnome.org telling as much as you can about the problem
363 you're experiencing. Please don't send personal messages to the
367 Obtaining related software
368 --------------------------
373 The only "hard" dependency of GNU Midnight Commander is glib. You can
376 ftp://ftp.gtk.org/pub/glib/
378 Minimal version of glib: 2.8.x
379 Recommended version: 2.14.x and higher.
381 Newer versions may work, but haven't been tested.
386 If the version of glib you have installed is older than 2.14.x, then you
387 also need to install PCRE library.
389 You can get PCRE from
396 There are many incomplete terminal databases out there, however, a
397 complete terminfo is bundled with ncurses. (It is simple to generate
398 the termcap database using the infocmp utility in ncurses).
400 Some terminfo data are included with the mc distribution (lib/*.ti).
401 Particularly linux, xterm and vt100. Use e.g. ''tic linux.ti'' to use
404 If you want to run mc on xterm/color_xterm/ansi_xterm (not rxvt), then
405 you might read lib/README.xterm for further information.
410 GNU Midnight Commander can use the included version of S-Lang, but you
411 can get the latest version here:
413 http://www.s-lang.org/
415 Alternatively, you can use ncurses:
417 http://www.gnu.org/software/ncurses/ncurses.html
422 The general purpose mouse (gpm) daemon is available from
424 http://unix.schottelius.org/gpm/
429 If your C compiler is not powerful enough to compile GNU Midnight
430 Commander, you should report is as a bug to the GNU Midnight Commander
431 team. Sometimes there is no solution than upgrading to a modern and
432 free compiler - GCC (Compiler Collection):
438 Currently you can not use gcc 4.2.4 (and probably other versions) on
439 AIX to compile the S-Lang version. Please use IBM XL C or IBM XL C/C++
442 If you compile a ncurses version you need to set TERM=dtterm to get
443 working color support. Furthermore it is important to specify the
444 --with-ncurses-includes/--with-ncurses-lib parameters because otherwise
445 mc will pick up term.h from AIX which does not work with the ncurses
448 The AIX S-Lang build was tested with S-Lang 2.0.7. Later versions may
449 also work but are not tested yet.
451 Here is an example for S-Lang, it is assumed that the S-Lang library
452 is installed under /user/local and that you also want want to install
457 export CONFIG_SHELL=/usr/bin/bash (if installed)
458 export SHELL=/usr/bin/bash (if installed)
461 --prefix=/usr/local \
462 --with-screen=slang \
463 --with-slang-includes=/usr/local/include \
464 --with-slang-libs=/usr/local/lib