Makefile.in

   1 # NOTE: If you have no `make' program at all to process this makefile, run
   2 # `build.sh' instead.
   3 #
   4 # Copyright (C) 1988, 89, 91, 92, 93, 94, 1995 Free Software Foundation, Inc.
   5 # This file is part of GNU Make.
   6 #
   7 # GNU Make is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2, or (at your option)
  10 # any later version.
  11 #
  12 # GNU Make is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with GNU Make; see the file COPYING.  If not, write to
  19 # the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  20
  21 #
  22 #       Makefile for GNU Make
  23 #
  24
  25 # Ultrix 2.2 make doesn't expand the value of VPATH.
  26 VPATH = @srcdir@
  27 # This must repeat the value, because configure will remove `VPATH = .'.
  28 srcdir = @srcdir@
  29
  30 CC = @CC@
  31
  32 CFLAGS = @CFLAGS@
  33 CPPFLAGS = @CPPFLAGS@
  34 LDFLAGS = @LDFLAGS@
  35
  36 # Define these for your system as follows:
  37 #       -DNO_ARCHIVES           To disable `ar' archive support.
  38 #       -DNO_FLOAT              To avoid using floating-point numbers.
  39 #       -DENUM_BITFIELDS        If the compiler isn't GCC but groks enum foo:2.
  40 #                               Some compilers apparently accept this
  41 #                               without complaint but produce losing code,
  42 #                               so beware.
  43 # NeXT 1.0a uses an old version of GCC, which required -D__inline=inline.
  44 # See also `config.h'.
  45 defines = @DEFS@ -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\"
  46
  47 # Which flavor of remote job execution support to use.
  48 # The code is found in `remote-$(REMOTE).c'.
  49 REMOTE = @REMOTE@
  50
  51 # If you are using the GNU C library, or have the GNU getopt functions in
  52 # your C library, you can comment these out.
  53 GETOPT = getopt.o getopt1.o
  54 GETOPT_SRC = $(srcdir)/getopt.c $(srcdir)/getopt1.c $(srcdir)/getopt.h
  55
  56 # If you are using the GNU C library, or have the GNU glob functions in
  57 # your C library, you can comment this out.  GNU make uses special hooks
  58 # into the glob functions to be more efficient (by using make's directory
  59 # cache for globbing), so you must use the GNU functions even if your
  60 # system's C library has the 1003.2 glob functions already.  Also, the glob
  61 # functions in the AIX and HPUX C libraries are said to be buggy.
  62 GLOB = glob/libglob.a
  63
  64 # If your system doesn't have alloca, or the one provided is bad, define this.
  65 ALLOCA = @ALLOCA@
  66 ALLOCA_SRC = $(srcdir)/alloca.c
  67
  68 # If your system needs extra libraries loaded in, define them here.
  69 # System V probably need -lPW for alloca.  HP-UX 7.0's alloca in
  70 # libPW.a is broken on HP9000s300 and HP9000s400 machines.  Use
  71 # alloca.c instead on those machines.
  72 LOADLIBES = @LIBS@
  73
  74 # Any extra object files your system needs.
  75 extras = @LIBOBJS@
  76
  77 # Common prefix for machine-independent installed files.
  78 prefix = @prefix@
  79 # Common prefix for machine-dependent installed files.
  80 exec_prefix = @exec_prefix@
  81
  82 # Directory to install `make' in.
  83 bindir = $(exec_prefix)/bin
  84 # Directory to find libraries in for `-lXXX'.
  85 libdir = $(exec_prefix)/lib
  86 # Directory to search by default for included makefiles.
  87 includedir = $(prefix)/include
  88 # Directory to install the Info files in.
  89 infodir = $(prefix)/info
  90 # Directory to install the man page in.
  91 mandir = $(prefix)/man/man$(manext)
  92 # Number to put on the man page filename.
  93 manext = 1
  94 # Prefix to put on installed `make' binary file name.
  95 binprefix =
  96 # Prefix to put on installed `make' man page file name.
  97 manprefix = $(binprefix)
  98
  99 # Whether or not make needs to be installed setgid.
 100 # The value should be either `true' or `false'.
 101 # On many systems, the getloadavg function (used to implement the `-l'
 102 # switch) will not work unless make is installed setgid kmem.
 103 install_setgid = @NEED_SETGID@
 104 # Install make setgid to this group so it can read /dev/kmem.
 105 group = @KMEM_GROUP@
 106
 107 # Program to install `make'.
 108 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 109 # Program to install the man page.
 110 INSTALL_DATA = @INSTALL_DATA@
 111 # Generic install program.
 112 INSTALL = @INSTALL@
 113
 114 # Program to format Texinfo source into Info files.
 115 MAKEINFO = makeinfo
 116 # Program to format Texinfo source into DVI files.
 117 TEXI2DVI = texi2dvi
 118
 119 # Programs to make tags files.
 120 ETAGS = etags -w
 121 CTAGS = ctags -w
 122
 123 objs = commands.o job.o dir.o file.o misc.o main.o read.o remake.o      \
 124        rule.o implicit.o default.o variable.o expand.o function.o       \
 125        vpath.o version.o ar.o arscan.o signame.o remote-$(REMOTE).o     \
 126        $(GLOB) $(GETOPT) $(ALLOCA) $(extras)
 127 srcs = $(srcdir)/commands.c $(srcdir)/job.c $(srcdir)/dir.c             \
 128        $(srcdir)/file.c $(srcdir)/getloadavg.c $(srcdir)/misc.c         \
 129        $(srcdir)/main.c $(srcdir)/read.c $(srcdir)/remake.c             \
 130        $(srcdir)/rule.c $(srcdir)/implicit.c $(srcdir)/default.c        \
 131        $(srcdir)/variable.c $(srcdir)/expand.c $(srcdir)/function.c     \
 132        $(srcdir)/vpath.c $(srcdir)/version.c                            \
 133        $(srcdir)/remote-$(REMOTE).c                                     \
 134        $(srcdir)/ar.c $(srcdir)/arscan.c                                \
 135        $(srcdir)/signame.c $(srcdir)/signame.h $(GETOPT_SRC)            \
 136        $(srcdir)/commands.h $(srcdir)/dep.h $(srcdir)/file.h            \
 137        $(srcdir)/job.h $(srcdir)/make.h $(srcdir)/rule.h                \
 138        $(srcdir)/variable.h $(ALLOCA_SRC) $(srcdir)/config.h.in
 139
 140
 141 .SUFFIXES:
 142 .SUFFIXES: .o .c .h .ps .dvi .info .texinfo
 143
 144 all: make
 145 info: make.info
 146 dvi: make.dvi
 147 # Some makes apparently use .PHONY as the default goal if it is before `all'.
 148 .PHONY: all check info dvi
 149
 150 make.info: make.texinfo
 151         $(MAKEINFO) -I$(srcdir) $(srcdir)/make.texinfo -o make.info
 152
 153 make.dvi: make.texinfo
 154         $(TEXI2DVI) $(srcdir)/make.texinfo
 155
 156 make.ps: make.dvi
 157         dvi2ps make.dvi > make.ps
 158
 159 make: $(objs)
 160         $(CC) $(LDFLAGS) $(objs) $(LOADLIBES) -o make.new
 161         mv -f make.new make
 162
 163 # -I. is needed to find config.h in the build directory.
 164 .c.o:
 165         $(CC) $(defines) -c -I. -I$(srcdir) -I$(srcdir)/glob \
 166               $(CPPFLAGS) $(CFLAGS) $< $(OUTPUT_OPTION)
 167
 168 # For some losing Unix makes.
 169 SHELL = /bin/sh
 170 @SET_MAKE@
 171
 172 glob/libglob.a: FORCE config.h
 173         cd glob; $(MAKE) libglob.a
 174 FORCE:
 175
 176 tagsrcs = $(srcs) $(srcdir)/remote-*.c
 177 TAGS: $(tagsrcs)
 178         $(ETAGS) $(tagsrcs)
 179 tags: $(tagsrcs)
 180         $(CTAGS) $(tagsrcs)
 181
 182 .PHONY: install installdirs
 183 install: installdirs \
 184          $(bindir)/$(binprefix)make $(infodir)/make.info \
 185          $(mandir)/$(manprefix)make.$(manext)
 186
 187 installdirs:
 188         $(SHELL) ${srcdir}/mkinstalldirs $(bindir) $(infodir) $(mandir)
 189
 190 $(bindir)/$(binprefix)make: make
 191         $(INSTALL_PROGRAM) make $@.new
 192         @if $(install_setgid); then \
 193            if chgrp $(group) $@.new && chmod g+s $@.new; then \
 194              echo "chgrp $(group) $@.new && chmod g+s $@.new"; \
 195            else \
 196              echo "$@ needs to be owned by group $(group) and setgid;"; \
 197              echo "otherwise the \`-l' option will probably not work."; \
 198              echo "You may need special privileges to install $@."; \
 199            fi; \
 200          else true; fi
 201 # Some systems can't deal with renaming onto a running binary.
 202         -rm -f $@.old
 203         -mv $@ $@.old
 204         mv $@.new $@
 205
 206 $(infodir)/make.info: make.info
 207         if [ -r ./make.info ]; then dir=.; else dir=$(srcdir); fi; \
 208         for file in $${dir}/make.info*; do \
 209           name="`basename $$file`"; \
 210           $(INSTALL_DATA) $$file \
 211             `echo $@ | sed "s,make.info\$$,$$name,"`; \
 212         done
 213 # Run install-info only if it exists.
 214 # Use `if' instead of just prepending `-' to the
 215 # line so we notice real errors from install-info.
 216 # We use `$(SHELL) -c' because some shells do not
 217 # fail gracefully when there is an unknown command.
 218         if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \
 219           install-info --infodir=$(infodir) $$dir/make.info; \
 220         else true; fi
 221
 222 $(mandir)/$(manprefix)make.$(manext): make.man
 223         $(INSTALL_DATA) $(srcdir)/make.man $@
 224
 225
 226 loadavg: loadavg.c config.h
 227         $(CC) $(defines) -DTEST -I. -I$(srcdir) $(CFLAGS) $(LDFLAGS) \
 228               loadavg.c $(LOADLIBES) -o $@
 229 # We copy getloadavg.c into a different file rather than compiling it
 230 # directly because some compilers clobber getloadavg.o in the process.
 231 loadavg.c: getloadavg.c
 232         ln $(srcdir)/getloadavg.c loadavg.c || \
 233         cp $(srcdir)/getloadavg.c loadavg.c
 234 check-loadavg: loadavg
 235         @echo The system uptime program believes the load average to be:
 236         -uptime
 237         @echo The GNU load average checking code believes:
 238         ./loadavg
 239 check: check-loadavg
 240
 241
 242 .PHONY: clean realclean distclean mostlyclean
 243 clean: glob-clean
 244         -rm -f make loadavg *.o core make.dvi
 245 distclean: clean glob-realclean
 246         -rm -f Makefile config.h config.status build.sh stamp-config
 247         -rm -f config.log config.cache
 248         -rm -f TAGS tags
 249         -rm -f make.?? make.??s make.log make.toc make.*aux
 250         -rm -f loadavg.c
 251 realclean: distclean
 252         -rm -f make.info*
 253 mostlyclean: clean
 254
 255 .PHONY: glob-clean glob-realclean
 256 glob-clean glob-realclean:
 257         cd glob; $(MAKE) $@
 258
 259 Makefile: config.status $(srcdir)/Makefile.in
 260         $(SHELL) config.status
 261 glob/Makefile: config.status $(srcdir)/glob/Makefile.in
 262         $(SHELL) config.status
 263 config.h: stamp-config ;
 264 stamp-config: config.status $(srcdir)/config.h.in
 265         $(SHELL) config.status
 266         touch stamp-config
 267
 268 #configure: configure.in aclocal.m4
 269 #       cd $(srcdir) && autoconf $(ACFLAGS)
 270 #config.h.in: configure.in aclocal.m4
 271 #       cd $(srcdir) && autoheader $(ACFLAGS)
 272
 273 # This tells versions [3.59,3.63) of GNU make not to export all variables.
 274 .NOEXPORT:
 275
 276 # The automatically generated dependencies below may omit config.h
 277 # because it is included with ``#include <config.h>'' rather than
 278 # ``#include "config.h"''.  So we add the explicit dependency to make sure.
 279 $(objs): config.h
 280
 281 # Automatically generated dependencies will be put at the end of the file.
 282
 283 # Automatically generated dependencies.
 284 commands.o : commands.c make.h dep.h commands.h file.h variable.h job.h
 285 job.o: job.c make.h commands.h job.h file.h variable.h
 286 dir.o: dir.c make.h
 287 file.o : file.c make.h commands.h dep.h file.h variable.h
 288 misc.o: misc.c make.h dep.h
 289 main.o: main.c make.h commands.h dep.h file.h variable.h job.h getopt.h
 290 read.o: read.c make.h commands.h dep.h file.h variable.h glob/glob.h
 291 remake.o: remake.c make.h commands.h job.h dep.h file.h
 292 rule.o : rule.c make.h config.h commands.h dep.h file.h variable.h rule.h
 293 implicit.o : implicit.c make.h rule.h dep.h file.h
 294 default.o: default.c make.h rule.h dep.h file.h commands.h variable.h
 295 variable.o : variable.c make.h commands.h variable.h dep.h file.h
 296 expand.o: expand.c make.h commands.h file.h variable.h
 297 function.o : function.c make.h variable.h dep.h commands.h job.h
 298 vpath.o : vpath.c make.h file.h variable.h
 299 version.o: version.c
 300 ar.o : ar.c make.h file.h dep.h
 301 arscan.o: arscan.c make.h
 302 signame.o: signame.c signame.h
 303 remote-stub.o : remote-stub.c make.h commands.h
 304 getopt.o: getopt.c getopt.h
 305 getopt1.o : getopt1.c getopt.h
 306 getloadavg.o: getloadavg.c